Machine Operator jobs at A&S Kinard

Machine Operator is responsible for the setup, operation, and maintenance of machinery used in the production of corrugated products. This includes ensuring machine efficiency, monitoring product quality, and training other operators. Duties and Responsibilities: Machine Setup & Operation: Accurately set up designated machine according to established setup procedures. Operate machinery at optimal capacity and speed, ensuring smooth production runs. Ensure cutting dies are secured properly, and inspect all dies before and after each run for needed repairs. Maximize equipment utilization while adhering to safety and quality standards. Quality Control & Monitoring: Monitor and inspect the quality of boxes, checking for issues such as loose liners, warping, incorrect sizing, and print quality. Report any production irregularities or quality concerns to the supervisor. Maintenance & Safety: Proactively identify and address equipment issues by submitting maintenance work orders and performing basic troubleshooting. Comply with safety protocols and maintain a clean, organized work area. Follow company policies related to safety, production, and machine operation. Training: Assist in training new machine operators and support cross-training on other machines within the department. Documentation & Reporting: Complete required documentation accurately and on time, including production data, machine operational status, and quality control data. Assist with scheduling to meet production goals and optimize machine uptime. Additional Duties: Assist with other duties as assigned by the management team. Recommend improvements in machine operations and production efficiency. Education and Experience: Preferred High school diploma or GED. Prior experience in the corrugated industry. 6+ months of experience as a Press Department First Helper or in the Press and Finishing Departments. Skills & Abilities: Language Skills: Ability to read and follow instructions, including factory masters and job-specific guidelines. Mathematical Skills: Ability to read a tape measure accurately and calculate measurements, percentages, volume, and rates using basic math concepts. Reasoning Ability: Ability to solve problems using common sense and apply instructions in various forms (written, oral, graphic). Able to deal with concrete variables in standardized situations. Technical Skills: Knowledge of equipment design and capabilities for efficient machine operation. Familiarity with product layouts, production specifications, and quality standards. Physical Demands: Ability to regularly stand, walk, talk, or hear. Frequent use of hands to handle, feel, and reach. Occasional sitting, kneeling, crouching, or crawling. Must be able to lift and/or move up to 50 pounds regularly and up to 100 pounds occasionally. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment: Regular exposure to moving mechanical parts and wet/humid conditions. Occasional exposure to high places, fumes, airborne particles, and vibration. The noise level in the work environment is typically loud. Performance Measurements: Operating Standards: Must meet or exceed standards for quality, cost, safety, customer satisfaction, and productivity. Personal Growth: Growth will be measured based on professional development goals, which will be reviewed annually. Employee Relations: Evaluation based on effective communication, respect, and teamwork. Creativity: Active participation in business innovation and process improvement initiatives. About Us: Pratt Industries is America's 5th largest corrugated packaging company and the world's largest privately-held producer of 100% recycled containerboard. With over 9,000 skilled employees dedicated to sustainability, we pride ourselves on our commitment to the environment. Founded in the USA over 30 years ago, we have experienced significant growth with advanced manufacturing facilities across 27 states.

Unpack your potential and grow with Pratt Industries - full-time year round jobs with a growing manufacturing company Pay starts at $19.80/hour, based on experience A company that cares, Pratt Industries is looking for new talent to join our family. Why Choose Us? At Pratt Industries, we care about our employees by providing secure jobs, a safe work environment, and many supportive benefits. By investing in employees, we are able to offer growth opportunities to build a thriving, lifelong career. Perks of Pratt? Insurance benefits and wellness reimbursement program within ONE MONTH of hire 3 Months: PAID holidays & 401(k) with match 6 Months: PAID vacation days 12 Months: FULL tuition reimbursement and PAID childbearing and parenting leave Qualifications? Only ONE thing: Strong desire to learn and grow in a state-of-the-art, fast-paced environment What do Machine Operators do at Pratt Industries? Our Machine Operators run the machines involved in converting corrugated board into the 2-D version of a box! Think boxes for Domino's pizzas, moving with Home Depot, Amazon deliveries, Hello Fresh meals, and more! (And yes, we make those!) What's it like working here? PHYSICAL DEMANDS Regularly required to stand, walk, talk, and hear. Frequently required to use hands to handle, or feel, reach with hands and arms. Ability to stoop, kneel, crouch, or crawl The employee is occasionally required to sit. The employee must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds with the assistance of another worker. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. MATHEMATICAL SKILLS Able to read a tape measure with speed and accuracy. Able to apply concepts of high school math. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or graphic form.

Description: Who We Are: Modula is the leading US manufacturer of vertical lift modules (VLM) and automated storage and retrieval systems. Modula US has Manufacturing plants in Dayton, OH and Lewiston, ME, and remote locations throughout the US. Our corporate global headquarters is in Italy with many locations around the globe. Modula's goal is to be an exceptional workplace admired for growing and developing talented employees and leaders, building innovative products through the development of a highly skilled and engaged workforce. Modula's values are Passion, Pursuit of Excellence, Accountability, Agility & Teamwork. Basic Functions and Scope of Job: Following training to operate and maintain our unique machines, the Machine Operator is responsible for all set-ups, machine settings, and quality checks to ensure products are manufactured to tight and exact tolerances. Key Responsibilities and Accountabilities: Make necessary adjustments to the machine to keep parts within dimensional tolerances. Perform preventive maintenance & periodic quality checks. Perform minor repairs of equipment if breakdown occurs. Work from layout, makeshift, and conventional jigs and fixtures Inventory, receive, and stow large bundles of steel stock; retrieve material and load machine. Adhere to all company procedures, including quality and safety. Material handling equipment including forklifts, overhead cranes, and pallet jacks. Maintain a clean and orderly workspace. Perform other duties as assigned. Machines: Modula Inc. uses various automated and robotic machines to manufacture our products. Our openings may be for specific machines, but we will entertain any interested applicant. S4/P4: Made by Salvagnini, the S4+P4 line is an automated machine combo that punches, shears, and bends sheet metal. SIR: Made by SIR S.p.A., the SIR is a fully automated robotic welder. L3: Made by Salvagnini, the L3 is an automated fiber laser cutter. LT8: Made by the BLM Group, the LT8 is an automated laser tube cutting machine. B3: Made by Salvagnini, the B3 is a press brake. Please note: this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time, with or without notice. It is expected that this role will perform other duties as assigned. Shift is 2pm-10:30pm Requirements: Qualifications and Skills: This role is pivotal in supporting production efforts. The individual in this position must have a high degree of integrity, resourcefulness, and professionalism in working with colleagues and clients, whether directly or indirectly. Relationship building, client service, and the ability to follow up in a timely manner are critical for success. The ideal candidate will have relative experience, excellent communication and teamwork skills, and mechanical aptitude. Minimum of one (1) year of manufacturing experience is required, automated manufacturing experience a plus; combination of education and experience can be considered; experience working in an ISO 9001 environment a plus. Minimum education of a high school diploma or its equivalent is required, vocational training in CNC machine setup and electrical work or another related field preferred. Strong mechanical and troubleshooting skills are required; proficiency in reading blueprints, schematics, and sketches is a must. Ability to use basic hand tools, measuring instruments, and power tools is a must. Written, oral, and deductive comprehension skills to effectively understand written processes to perform role with the highest regard for Safety and Quality is a must; ability to communicate technical details is a must. Strong math comprehension, including basic geometry, is a must. Ability to operate a computer and its applications, such as Microsoft Office (Word, Excel, Outlook) is a must. Consistent attendance reliability is an expectation Work Environment (Position / % of time per day or frequency) Walking / 10% Standing / 75% Sitting / 5% Twisting, turning, and squatting / 10% Climbing / Step ladder occasional Pulling/Pushing / Up to 150 lbs. Using pallet jack Lifting / Up to 50 lbs. Must be able to pass background check and drug screening. Modula Inc. is an EEO (Equal Employment Opportunity) Employer. Our search and selection process are based on identifying qualified candidates who are highly motivated to grow with our company. Employment decisions are based on the principles of equal employment opportunity. Recruitment, testing/assessment, selection, and promotion will be administered without regard to race, color, sexual orientation, physical or mental disability, religion, age, ancestry or national origin, whistleblower activity, previous assertion of a claim or right under worker's compensation, marital status, genetic information, or any other characteristic protected by federal, state, or local law. Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location.

Machine Assistant Starting Pay: $18.98/hour + shift differential. Eligible for pay increases at 90 days and 6 months based on performance and attendance. At Pratt, the potential for growth is limitless-this is not just a job, it's a career! Why Join Pratt? At Pratt, we invest in our employees. When you join us, you're joining a team that values career growth and development. Here's what you can expect when you come on board: Comprehensive Benefits: Medical, Dental, and Vision plans. Financial Security: 401(k) with company match, Short-Term and Long-Term Disability. Life Assistance: Supplemental life insurance, Legal and Travel Assistance, EAP/Home & Auto Insurance. Work-Life Balance: Paid Holidays, Paid Vacation, and Childbearing/Parental Leave. Wellness Programs: Healthy Lifestyles Program, Gym Membership Reimbursement ($500/year), Virgin Pulse Fitness Tracker. Educational Support: 100% Tuition Reimbursement & Assistance. Discounts: Wireless, Auto, and Computer discounts. Job Description As a Machine Assistant, you will support machine operators in all aspects of the press operation, including setup, operation, cleanup, and recommending improvements. Duties and Responsibilities Set up slotting, feed, and die-cut sections on the machine according to proper setup techniques. Assist the operator with other duties as needed. Monitor board quality (e.g., loose liner, warp, dimensions, caliper, etc.) and report any quality issues to the operator. Sort as necessary to maintain machine productivity. Work at the pace set by the machine operator. Cross-train on other machines as necessary. Be open to moving up the line of progression to operator, regardless of shift. Complete necessary reports in an accurate and timely manner. Submit maintenance work orders to supervisors for needed repairs. Be proactive about equipment maintenance. Follow all company policies and procedures, including safety guidelines and maintaining good housekeeping. Assist operators in adhering to the production schedule. Recommend adjustments to optimize the schedule and meet cost, quality, and service goals. Report any scheduling issues to the Supervisor. Perform additional duties as assigned by management. Education and/or Experience High school diploma or GED. Preferred qualifications: Prior experience in the corrugated industry. 6 months' experience as a Flexo or DieCut Helper. 6 months' experience in the Press and Finishing Departments. Language Skills Ability to read and follow instructions on factory masters. Mathematical Skills Ability to read a tape measure with speed and accuracy. Able to calculate percentages, measurements, volume, and rates. Knowledge of high school-level math concepts. Reasoning Ability Ability to understand and carry out instructions (written, oral, or graphic). Ability to solve problems involving concrete variables in standardized situations. Technical Skills Knowledge of equipment design and capabilities, ensuring efficient operation. Familiarity with product layouts and production specifications. Understanding of product quality specifications and standards. Certificates, Licenses, and Registrations May be required to maintain a current Lift Truck Operator License. Physical Demands Regularly required to stand, walk, talk, or hear. Frequently required to use hands to handle or feel objects, reach with hands and arms, and stoop, kneel, crouch, or crawl. Occasionally required to sit. Must regularly lift or move up to 50 pounds. Vision requirements include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment Regular exposure to moving mechanical parts. Frequent exposure to wet and/or humid conditions. Occasional exposure to high, precarious places, fumes, airborne particles, and vibration. The noise level in the work environment is usually loud.

Join Our Team! Spinnaker, a Mactac Company, is hiring motivated individuals to join our team! We produce pressure-sensitive materials used in everyday items like labels, packaging, medical devices, displays, and more. Pay: Starting at $21.42/hr + shift differential Earn up to $22.06 within first 6 months! Shifts Available: 2nd Shift: 2:00pm to 10:00pm 3rd Shift: 10:00pm to 6:00am What We Offer: Health benefits starting day one (medical, dental, vision, and more) Paid time off - vacation, sick time, and 10 paid holidays 401(k)- employer match Supportive team environment Growth and advancement opportunities What You'll Do (Machine Operator): Help operate machines that coat or cut materials Ensure materials are loaded and machine settings are correct Complete basic paperwork and computer entries Communicate with your team about production status Monitor materials and flag any quality issues Requirements: Basic computer skills Ability to lift up to 50 lbs (team help for anything heavier) Must be legally authorized to work in the U.S. No relocation assistance provided. We are an Equal Opportunity Employer. Disclaimers: The above information in this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. It is the policy of Mactac that all employees are employed at the will of Mactac for an indefinite period and are subject to termination at any time, for any reason, with or without cause or notice. At the same time, employees may terminate their employment at any time and for any reason. Equal Opportunity Employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, citizenship status, marital status or any other consideration prohibited by law or contract.

All jobs at Southern Champion Tray (SCT) require Team members to act in accordance with the shared Core Values and Operating principles of the company as they perform specific job functions. These include: Trustworthy - We strive for our actions to match our words in all our relationships. Servant - Hearted - We enable and empower our team to serve the needs of customers, Team members, suppliers and the community. Relational - We aim to build healthy relationships while fostering an environment that promotes compassion, balance, and personal and professional growth. Resourceful - We value strategic insourcing, first looking to create solutions internally, and then looking to apply that knowledge to future opportunities. PRIMARY RESPONSIBILITY: The Utility Machine Operator is responsible for operating various production machinery as assigned by the Supervisor and according to the daily production schedule. Safely operates corrugated converting equipment including the Window Film, Flatbed Die Cutter and Curtain Coater machine ensuring high-quality corrugated packaging and products are produced at a consistent rate of speed within established machine standards, production goals, and customer specifications. SECONDARY RESPONSIBILITIES: Safely start up, set up, operate and perform necessary machine adjustments in a consistent manner while adhering to required safety, quality, and production operating procedures Follows all safety related policies, rules, regulations, technical instructions, and guidelines; uses situational awareness and actively looks for weak signals to identify unsafe behaviors and conditions; consistently wears appropriate PPE for the task at hand and within the assigned area; immediately notifies Supervisor of any unsafe condition that exists Actively performs all SCT Quality procedures including required quality checks and obtaining required approvals; works with machine crew to continuously monitor production to ensure quality standards are consistent and meet customer specifications Continuously monitors machine operation to detect any malfunctions and identifies defects or deviations from quality standards; performs machine adjustments and troubleshooting to correct defects Records defects or non-conforming items appropriately and notifies Supervisor or Quality Manager; ensures that finished products with defects are properly scrapped and discarded while consistently following procedures to minimize waste Performs routine cleaning and preventative maintenance as scheduled on machine, including cleaning, lubricating, and replacing worn or damaged parts Troubleshoots issues or malfunctions with machinery and performs minor repairs when possible. Actively communicates issues with machinery to the maintenance technicians and works together to troubleshoot and resolve issues while minimizing downtime Accurately records and completes production notes for each job including start up time, down time, finished goods produced, raw material usage, waste, etc. Provides guidance, instruction, and assistance to machine crew to ensure product is meeting quality standards and within the run speeds and goals established. Communicates with upstream and downstream internal customers effectively to improve safety, quality, and efficiency of production; effectively communicates with the following shift regarding status of jobs, machine issues and other necessary information Actively seeks and adopts new updates and improvements to processes, new procedures, and innovations, which would add to the efficiency and safety of the operation Responsible for maintaining machines, equipment and work area that are within GMP and GFSI standards; assists the Food Safety Team in ensuring that product meets or exceeds GFSI standards Maintains a clean work environment including the machine, floors, desks, and supplies in accordance with the 5S system Window Machine: Safely feed corrugated sheets into feeder section of window machine to ensure a straight and smooth flow of product Utilizing attachments, perform machine adjustments when necessary to achieve proper windowing; adjust stacking section to ensure blanks are stacking uniformly Print job sheets, load and WIP tags; perform routine cleaning and maintenance including cleaning belts, drums and replacing film Flatbed Die Cutter: Safely start up and set up flatbed die cutter, pile turner and conveyor system Inspect each die and properly plug dies into machine; set up turn table and ensure accurate alignment to the sheet size Safely position corrugated sheets into the feed section; turn table and flips sheets ensuring removal of any defective or non-conforming material Curtain Coater Machine Measure dimensions of corrugated sheets and ensure sufficient wax supply in coating container Safely operate wax coater pump and properly feed sheets into the curtain coater Accurately record job details, job number and paper weight before and after waxing; perform periodic quality checks of wax using oil drop tests Review job ticket instructions prior to each run; ensure all necessary items and information is provided to produce job per customer specifications; verify raw materials are correct and accurately match the job ticket description Operators may cross trains in other areas or on other machines as needed and perform other duties as assigned by the Supervisor. AUTHORITY: Must have the ability to lead a crew that has been placed with them to execute the demands of the operation efficiently and to respond to oral instructions from the supervisor and written instructions. QUALIFICATIONS: EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); one year experience in a manufacturing or production environment including 3-6 months of machine operation experience; experience in a corrugated plant is preferred. Must have basic computer skills and possess ability to utilize computer software. Requires mechanical aptitude and skills. LANGUAGE SKILLS: Must have the ability to read and understand documents, letters, etc. and write legibly in English. Must be able to understand and speak clearly, communicate, and understand directions in English as needed. Fairfield Plant - 7100 Dixie Hwy, Fairfield, OH 45014 2nd Shift (4 Day/10 Hour) - 3:30 PM to 2:00 AM EST

Machine Operator has the ability to run multiple machines effectively and efficiently on a continuous basis and can identify problems during the production run, position work pieces, and inspect parts on a daily basis using various types of inspection equipment. Job Function: Performs required operations on EDM/multi-axis machines, including loading and unloading of parts, part inspection, electrode preparation and changing; Cleans and performs preventive maintenance and minor adjustments of assigned equipment; Prepares various logs and records to document machine operation and daily production, enters required data into computer; Moves/transports parts to appropriate location as needed; Maintains safe, clean and orderly work areas; Receives, reviews, and /or refers to various records or reports including travelers, SOP, shift reports, safety sheets, etc.; Prepares labor sheets and non-conformance forms; Interacts and communicates with various groups and individuals including the immediate supervisor, co-workers, and other shop personnel; Operates wire machine, grinders, micrometers, gauges, various power tools, computer, etc.; Performs related duties as required. Primary Responsibilities: * Set up and switch jobs as required * Perform tasks efficiently and within standard time allotment * Keep track of materials in the area * Minor maintenance of machine * Maintain an excellent attendance record * Verify all parts are conforming before signing off on traveler * Keep track of all scrap and seek corrective actions when necessary * Run and maintain the function of 2+ machines in a manufacturing cell * Maintain all inspection gauges and tooling as required * Perform miscellaneous duties and projects as assigned and required * Function effectively within a team environment * Adhere to AS9100 and other quality standards Requirements: * Must demonstrate a high ability and understanding in the area of machining * Must have High School Diploma or equivalent (documentation required) * Must meet ITAR definition of US Person (documentation required) * Be able to communicate information clearly verbally and in writing in English * Must be able to run parts to spec on a daily basis on multiple machines * Must be able to read simple part drawings * Must be able to use and read micrometers and dial calipers accurately after company provided training * Must be able to calculate dimensions and tolerances using knowledge of mathematics after company provided training * Must be able to follow verbal and written instructions in English * Perform any other task management deems necessary or needed by the company within employee's capabilities * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment testing will be required. Preferable Experience: * Experience in Conventional machining such as milling, drilling and turning * Previous relevant machining experience or education/training in machining Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, and communicate. Must be able to move throughout the facility. The employee must frequently lift or move up to 35 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. To apply, please submit your resume noting job inquiry #4051620725 to the Human Resources Department at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. This post will expire on Thursday December 11th, 2025

Machine Operator has the ability to run multiple machines effectively and efficiently on a continuous basis and can identify problems during the production run, position work pieces, and inspect parts on a daily basis using various types of inspection equipment. Job Function: Performs required operations on EDM/multi-axis machines, including loading and unloading of parts, part inspection, electrode preparation and changing; Cleans and performs preventive maintenance and minor adjustments of assigned equipment; Prepares various logs and records to document machine operation and daily production, enters required data into computer; Moves/transports parts to appropriate location as needed; Maintains safe, clean and orderly work areas; Receives, reviews, and /or refers to various records or reports including travelers, SOP, shift reports, safety sheets, etc.; Prepares labor sheets and non-conformance forms; Interacts and communicates with various groups and individuals including the immediate supervisor, co-workers, and other shop personnel; Operates wire machine, grinders, micrometers, gauges, various power tools, computer, etc.; Performs related duties as required. Primary Responsibilities: * Set up and switch jobs as required * Perform tasks efficiently and within standard time allotment * Keep track of materials in the area * Minor maintenance of machine * Maintain an excellent attendance record * Verify all parts are conforming before signing off on traveler * Keep track of all scrap and seek corrective actions when necessary * Run and maintain the function of 2+ machines in a manufacturing cell * Maintain all inspection gauges and tooling as required * Perform miscellaneous duties and projects as assigned and required * Function effectively within a team environment * Adhere to AS9100 and other quality standards Requirements: * Must demonstrate a high ability and understanding in the area of machining * Must have High School Diploma or equivalent (documentation required) * Must meet ITAR definition of US Person (documentation required) * Be able to communicate information clearly verbally and in writing in English * Must be able to run parts to spec on a daily basis on multiple machines * Must be able to read simple part drawings * Must be able to use and read micrometers and dial calipers accurately after company provided training * Must be able to calculate dimensions and tolerances using knowledge of mathematics after company provided training * Must be able to follow verbal and written instructions in English * Perform any other task management deems necessary or needed by the company within employee's capabilities * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment testing will be required. Preferable Experience: * Experience in Conventional machining such as milling, drilling and turning * Previous relevant machining experience or education/training in machining Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, and communicate. Must be able to move throughout the facility. The employee must frequently lift or move up to 35 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. To apply, please submit your resume noting job inquiry #4051660925 to the Human Resources Department at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. This post will expire on Wednesday December 17th, 2025

Wire EDM Machine Operator has the ability to run multiple machines effectively and efficiently on a continuous basis and can identify problems during the production run, position work pieces, and inspect parts on a daily basis using various types of inspection equipment. Job Function: Performs required operations on Wire EDM/multi-axis machines, including loading and unloading of parts, part inspection, electrode preparation and changing; Cleans and performs preventive maintenance and minor adjustments of assigned equipment; Prepares various logs and records to document machine operation and daily production, enters required data into computer; Moves/transports parts to appropriate location as needed; Maintains safe, clean and orderly work areas; Receives, reviews, and /or refers to various records or reports including travelers, SOP, shift reports, safety sheets, etc.; Prepares labor sheets and non-conformance forms; Interacts and communicates with various groups and individuals including the immediate supervisor, co-workers, and other shop personnel; Operates wire machine, grinders, micrometers, gauges, various power tools, computer, etc.; Performs related duties as required. Primary Responsibilities: * Set up and switch jobs as required * Perform tasks efficiently and within standard time allotment * Keep track of materials in the area * Minor maintenance of machine * Maintain an excellent attendance record * Verify all parts are conforming before signing off on traveler * Keep track of all scrap and seek corrective actions when necessary * Run and maintain the function of 2+ machines in a manufacturing cell * Maintain all inspection gauges and tooling as required * Perform miscellaneous duties and projects as assigned and required * Function effectively within a team environment * Adhere to AS9100 and other quality standards Requirements: * Must demonstrate a high ability and understanding in the area of machining * Must have High School Diploma or equivalent (documentation required) * Must meet ITAR definition of US Person (documentation required) * Be able to communicate information clearly verbally and in writing in English * Must be able to run parts to spec on a daily basis on multiple machines * Must be able to read simple part drawings * Must be able to use and read micrometers and dial calipers accurately after company provided training * Must be able to calculate dimensions and tolerances using knowledge of mathematics after company provided training * Must be able to follow verbal and written instructions in English * Ability to train on split shift for 2-4 weeks before converting to night shift * Perform any other task management deems necessary or needed by the company within employee's capabilities * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment testing will be required. Preferable Experience: * Experience in Conventional machining such as milling, drilling and turning * Previous relevant machining experience or education/training in machining Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, and communicate. Must be able to move throughout the facility. The employee must frequently lift or move up to 35 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, please submit your resume noting job inquiry #409151125 to the Human Resources Department at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

Responsible for all activities associated with safely assisting operating production machines including setup, operation, cleanup, and recommending improvements to operations to meet customer demand. DUTIES AND RESPONSIBILITIES Work safely at all times, be aware of surroundings and understand and comply with Pratt Industries Safety rules, operating procedures, and help hold co-workers responsible for safety related items. Participate in Plant Safety Committee. Follow at all times GMPs (Good Manufacturing Processes) Learn and comply with Pratt Industries quality procedures and policies. Stop bad quality from leaving the facility to the Customer. Catch it on the front end of manufacturing the product. Strong attention to detail for poor quality; prevent bad quality being sent to customer. Will be responsible for assisting the Machine Operator maximize the utilization of equipment by operating the machinery at available capacity and speed. Improve set up times daily, improve downtime daily. Identify and address mechanical concerns and report to Production Supervisor or Production Manager or Plant Mechanical Tech/Specialist Housekeeping and cleaning of work areas - keep clean and free of tripping hazards during shift and end of shift cleaning of the area. In addition, good housekeeping of areas employee utilizes; break rooms, bathrooms, refrigerators etc. Learn and understand assisting the Machine Operator with the capability and capacity of machine and drive efficiencies limiting waste and downtime. Do not sacrifice quality for machine speeds - must have both excellent quality and high efficiencies with minimal downtime. Continue to learn job duties on the machine, downtime, setup times and quality. Cross-train on other machines and learn other positions in the plant. Assist Machine Operator with completing necessary reports in an accurate and timely manner, including but not limited to: Production Data, Machine Operational Status, Safety Data, Quality Data. Turn in maintenance work order requests to supervisor for needed repairs on the machine or machines. Be proactive in the maintenance and housekeeping of equipment. Switch duties with co-workers as necessary. Learning environment to learn as many job duties to assist with plant growth and personal and professional growth opportunities. Comply with all company policies and procedures, including safety and maintaining good housekeeping. Adheres to the production schedule. Makes recommendations for optimizing the schedule to meet cost, quality and service goals. Reports any unusual scheduling issues to the Supervisor. Must be able to work overtime as necessary, sometimes on short notice. We serve our customers 24x7 - 365 days a year and sometimes work on holidays not avoidable. Additional duties may be assigned by management. EDUCATION and/or EXPERIENCE High school diploma or GED. Candidates are PREFERRED who offer the following: Prior work experience in the packaging industry; paper, plastics, converting 6 months' experience in some type of manufacturing operation. LANGUAGE SKILLS Able to read and follow instructions; quality, safety, job packets MATHEMATICAL SKILLS Able to read a tape measure with speed and accuracy. Able to calculate figures and amounts such as percentages, measurement, volume and rate. Able to apply concepts of high school math. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or graphic form. Ability to deal with problems involving one or more concrete variables in standardized situations. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to stand, walk, and talk or hear. The employee frequently is required to use hands to finger, handle, or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee may occasionally be required to sit. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to wet and/or humid conditions. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; and vibration. The noise level in the work environment is usually loud.

Responsible for all activities associated with safely operating paper bag machines including setup, operation, quality checks, cleanup, and recommending improvements to operations to meet customer demand. DUTIES AND RESPONSIBILITIES Work safely at all times, be aware of surroundings and understand and comply with Pratt Industries Safety rules, operating procedures, and help hold co-workers responsible for safety related items. Participate in Plant Safety Committee. Follow at all times GMPs (Good Manufacturing Processes) Perform a range of production support responsibilities, to include various appropriate machine adjustments and a range of maintenance tasks. Must be comfortable with the use of touch screen controls. Support start-up operations by stripping, preparing, setting and changing rolls, ink, or other raw materials to manufacture the product. Gather finished product from machines and box, bag or package as required First bag out quality check and on-going inspections checking the condition and quality of the finished product and remove any that do not meet our quality standards and confirm there is no process changes or quality issues. Maintain accurate count of product when packing or bagging, as well as, keeping pace with the varying production speeds/levels Secure cases to prevent shifting or moving by stacking them in an orderly manner The operator must have basic reading and math skills. Mechanical and problem solving abilities are necessary. Responsible for equipment set up and productivity. Check job order and set machine according. Learn and comply with Pratt Industries quality procedures and policies. Stop bad quality from leaving the facility to the Customer. Catch it on the front end of manufacturing the product. Strong attention to detail for poor quality; prevent bad quality being sent to customer. Maximize the utilization of equipment by operating the bag machinery at available capacity and speed. Improve set up times daily, improve downtime daily. Identify and address mechanical concerns and report to Production Supervisor or Production Manager or Plant Mechanical Tech/Specialist Housekeeping and cleaning of work areas - keep clean and free of tripping hazards during shift and end of shift cleaning of the area. In addition, good housekeeping of areas employee utilizes; break rooms, bathrooms, refrigerators etc. Learn and understand capability and capacity of machine and drive efficiencies limiting waste and downtime. Do not sacrifice quality for machine speeds - must have both excellent quality and high efficiencies with minimal downtime. Train and assist Assistant Machine Operators, Machine Helpers and Production Utility with job duties on the machine, downtime, setup times and quality. Complete necessary reports in an accurate and timely manner, including but not limited to: Production Data, Machine Operational Status, Safety Data, Quality Data. Cross-train on other machines and learns other positions in the plant. Switch duties with co-workers as necessary. Learning environment to learn as many job duties to assist with plant growth and personal and professional growth opportunities. Comply with all company policies and procedures, including safety and maintaining good housekeeping. Must be able to work overtime as necessary, sometimes on short notice. We serve our customers 24x7 - 365 days a year and sometimes work on holidays not avoidable. Additional duties may be assigned by management. EDUCATION and/or EXPERIENCE High school diploma or GED. Candidates are PREFERRED who offer the following: Prior work experience in the packaging industry; paper, plastics, converting 6 months' experience in some type of manufacturing operation. LANGUAGE SKILLS Able to read and follow instructions; quality, safety, job packets MATHEMATICAL SKILLS Able to read a tape measure with speed and accuracy. Able to calculate figures and amounts such as percentages, measurement, volume and rate. Able to apply concepts of high school math. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or graphic form. Ability to deal with problems involving one or more concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS May be required to maintain a current Lift Truck Operator License. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to stand, walk, and talk or hear. The employee frequently is required to use hands to finger, handle, or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee may occasionally be required to sit. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to wet and/or humid conditions. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; and vibration. The noise level in the work environment is usually loud.

United Performance Metal's rapidly growing Advanced Solutions center is looking to add a Machine Operator to their 2nd shift Milling Center team. Supported by O'Neal Industries with 100 years of expertise, this opening will provide you the opportunity to learn what it takes to distribute specialty metals across the globe. Through advanced technology and global reach, our company prides itself on delivering excellence and growing opportunities for our Associates. FLSA Status: Non-Exempt Starting Wage: $21 - $23, depending on experience Working Hours: Monday - Thursday 5:00am - 3:30pm Location: Hamilton, OH, On-site ~~ $1,000 Sign-On Bonus after 90-days~~ As a Machine Operator, you will: * Serve as a subject matter expert on customer manufacturing specifications to create machine programming * Set up, troubleshoot, and operate machinery such as EDMs, mills, grinders, or VTLs according to strict tolerances. * Examine and measure completed units, identifying defects and ensuring adherence to specifications; adjust machine controls to resolve production errors * Exercise strong problem-solving ability for the inspection and repair of machinery * Other duties as assigned Benefits Provided: * Competitive Health, Dental, and Vision Insurance Premiums * 2+ Weeks Mixed PTO * Paid Holidays * 401 (k) Matching * Quarterly Bonus Program * Tuition Reimbursement * Laundered Uniforms Skills and Experience for Success: * 2+ years of experience using and/or programming manual, semi-automated or automated tools, and machines * Ability to proficiently set up and use measuring equipment including CMM, CAD-CAM, Micrometers, Height Gauges, Calipers, Profilometers, etc. * Expert in reading and interpreting blueprints and design sketches * Ability to create and maintain updated work processes related to machining * Familiar with warehouse, manufacturing, or production planning environments * Ability to train on 1st shift preferred.

pays between $19.00 - $20.00 an hour Who We Are Pretium Packaging is a leading designer and manufacturer of innovative packaging solutions for a diverse range of industries. We are dedicated to delivering high-quality products that meet the evolving needs of our customers while ensuring exceptional customer service at every interaction. Our commitment to excellence extends beyond our products; we also prioritize creating a positive and collaborative work environment that empowers our employees to thrive. By fostering a culture of innovation and continuous improvement, we aim to drive success for our clients and contribute to sustainable practices in the packaging industry. Machine Operator We are hiring for multiple Machine Operators to join our team. As a Machine Operator you will play a vital role in our manufacturing process. You will be responsible for setting up and operating machines, monitoring their performance, and performing routine maintenance tasks. In addition, you will be required to inspect finished products to ensure they meet quality standards and make adjustments as necessary. Key Responsibilities Set up and operate plastic molding machines according to established procedures. Monitor machines during operation to ensure proper functioning and make adjustments as necessary. Perform routine maintenance tasks on machines to ensure optimal performance. Inspect finished products for quality and make adjustments as necessary. Troubleshoot and resolve issues that may arise during production. Maintain inventory of raw materials and notify supervisor when supplies need to be replenished. Follow established safety protocols and maintain a clean and organized work area. Other duties as assigned. Qualifications and Skills High School diploma or equivalent. Previous experience operating plastic molding machines preferred. Strong understanding of plastic manufacturing processes and equipment. Mechanical training/aptitude and technical training on packaging, plastics and printing equipment. Ability to read and interpret technical drawings. Good manual dexterity and attention to detail. Ability to work effectively in a fast-paced environment. Strong problem-solving skills. Excellent communication skills, both verbal and written. What We Offer Full-Time, Direct Hire Position Competitive Salary $1,000 sign on bonus! Benefits Opportunities for professional growth and development. Collaborative work environment with a diverse team of professionals. Please apply on here or visit our website at: ************************************************************************************

Dynamic Dies in Holland, OH is looking to hire a full-time Machine Operator for 2nd shift. Are you looking to build a career in the manufacturing industry? Would you like to work for a family-owned company that values its employees? If so, please read on! This position for any shift earns a competitive wage depending on experience (minimum of $19/hour). We provide a competitive benefits package that includes medical and dental as well as great perks, including employee appreciation events, free food, games, prizes, and schedule flexibility. If this sounds like the right manufacturing opportunity for you, apply today! ABOUT DYNAMIC DIES Founded in 1971, we are one of the largest manufacturers of tooling for the corrugated box industry. We began as a small business in a rented garage and have expanded to a multi-state operation consisting of four manufacturing facilities located in Toledo, Ohio, Pittsburgh, PA, Indianapolis, IN, and Middletown, Ohio. Our state-of-the-art graphics operation is centralized at our Toledo manufacturing facility which is also home to our corporate offices. Our company now has around 200 employees, and we have been voted as a top workplace by our employees in 2017, 2021 and 2024. The foundation of our company was built on mutual respect for others, hard work, and an unyielding pride in getting the job done right. We would not be where we are today without our dedicated employees, some of whom have been with us since the beginning! They take pride in their work, and we give back by providing a positive work environment and a comprehensive benefits package. A DAY IN THE LIFE OF A MACHINE OPERATOR Imagine walking through the grocery store and checking the boxes to see if you helped create that box. Or at your child's next birthday, their gift came in a box you helped create. As a Machine Operator that's what you do-create tooling that makes boxes for the items you see and use everyday. In this Machine Operator position, you play a key role in creating the primary product that is sold to our customers. You are the first step in our process and the first to ensure it's in perfect condition and lives up to the customer's expectations. Using your keen eye for detail, you accurately read all machine specifications and CAD drawings. You will run multiple state of the art CNC machines that burn the layout of the die into wooden die boards. You will ensure the layout matches the file and measures correctly. Because every job we do is custom, you enjoy the job variety this brings as well as learning something new. You find great satisfaction in working with your hands to bring our products to life! No experience? No problem! We will train you! QUALIFICATIONS FOR MACHINE OPERATOR * High school diploma or equivalent * Ability to read a tape measure * Ability to apply basic math skills * Ability to stand for up to 10 hours a day Do you want to be part of a great team that has been named a Top Workplace? Are you looking for a company that takes care of their employees? Are you looking for excellent benefits and a great work environment? If yes, you might just be perfect for this Machine Operator position at our company for all shifts! WORK SCHEDULE FOR MACHINE OPERATOR This position will work 2nd shift. The shift hours will vary depending on the shift with an 8 hour shift. ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this Machine Operator job for 2nd shift, please fill out our initial mobile-friendly application. We look forward to meeting you! Location: 43528

Job Description Machine Operator Dynamic Dies in Holland, OH is looking to hire a full-time Machine Operator for 2nd shift. Are you looking to build a career in the manufacturing industry? Would you like to work for a family-owned company that values its employees? If so, please read on! This position for any shift earns a competitive wage depending on experience (minimum of $19/hour). We provide a competitive benefits package that includes medical and dental as well as great perks, including employee appreciation events, free food, games, prizes, and schedule flexibility. If this sounds like the right manufacturing opportunity for you, apply today! ABOUT DYNAMIC DIES Founded in 1971, we are one of the largest manufacturers of tooling for the corrugated box industry. We began as a small business in a rented garage and have expanded to a multi-state operation consisting of four manufacturing facilities located in Toledo, Ohio, Pittsburgh, PA, Indianapolis, IN, and Middletown, Ohio. Our state-of-the-art graphics operation is centralized at our Toledo manufacturing facility which is also home to our corporate offices. Our company now has around 200 employees, and we have been voted as a top workplace by our employees in 2017, 2021 and 2024. The foundation of our company was built on mutual respect for others, hard work, and an unyielding pride in getting the job done right. We would not be where we are today without our dedicated employees, some of whom have been with us since the beginning! They take pride in their work, and we give back by providing a positive work environment and a comprehensive benefits package. A DAY IN THE LIFE OF A MACHINE OPERATOR Imagine walking through the grocery store and checking the boxes to see if you helped create that box. Or at your child's next birthday, their gift came in a box you helped create. As a Machine Operator that's what you do-create tooling that makes boxes for the items you see and use everyday. In this Machine Operator position, you play a key role in creating the primary product that is sold to our customers. You are the first step in our process and the first to ensure it's in perfect condition and lives up to the customer's expectations. Using your keen eye for detail, you accurately read all machine specifications and CAD drawings. You will run multiple state of the art CNC machines that burn the layout of the die into wooden die boards. You will ensure the layout matches the file and measures correctly. Because every job we do is custom, you enjoy the job variety this brings as well as learning something new. You find great satisfaction in working with your hands to bring our products to life! No experience? No problem! We will train you! QUALIFICATIONS FOR MACHINE OPERATOR High school diploma or equivalent Ability to read a tape measure Ability to apply basic math skills Ability to stand for up to 10 hours a day Do you want to be part of a great team that has been named a Top Workplace? Are you looking for a company that takes care of their employees? Are you looking for excellent benefits and a great work environment? If yes, you might just be perfect for this Machine Operator position at our company for all shifts! WORK SCHEDULE FOR MACHINE OPERATOR This position will work 2nd shift. The shift hours will vary depending on the shift with an 8 hour shift. ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this Machine Operator job for 2nd shift, please fill out our initial mobile-friendly application. We look forward to meeting you! Location: 43528 Job Posted by ApplicantPro

Job Description ProAmpac is a leading global flexible packaging company with comprehensive product offerings. We provide creative packaging solutions, industry-leading customer service and award-winning innovation to a diverse global marketplace. We are guided in our work by five core values that are the basis for our success: Integrity, Intensity, Innovation, Involvement and Impact. We collaborate, so you succeed. We are moving flexible packaging forward by redefining innovation through collaboration within our own company and with our customers and suppliers. Benefits: 401(k) Matching, Dental Insurance, Employee Assistance Program, Flexible Spending Account, Health Insurance, Life Insurance, Paid Time Off, Parental Leave, Referral Program, Vision Insurance. **Schedule: **Monday - Thursday / 6:30am - 5pm Position Overview: Responsible for machine operation and crew safety Troubleshoot & repair most mechanical breakdowns & adjustments. Adhere to safety rules and lockouts Read and understand work orders & blue lines. Complete daily production report Make sure all guards are in place. Keep machine area and aisles clean. Able to run and change over machine. Increase daily rate of production while keeping down waste. Set up & gauge printers as necessary. Train potential operators Requirements: Mechanical skills, troubleshooting and repair Previous machine operator experience Able to lift and handle boxes up to 50 pounds Team player & leader Must be able to adhere to company policy, safety rules and regulations, and wear PPE You should be proficient in: Troubleshooting Skills Machine Setups for Production Runs

Responsible for all activities associated with safely operating plastic extruder or rewinder machines including setup, operation, quality checks, cleanup, and recommending improvements to operations to meet customer demand. DUTIES AND RESPONSIBILITIES Work safely at all times, be aware of surroundings and understand and comply with Pratt Industries Safety rules, operating procedures, and help hold co-workers responsible for safety related items. Participate in Plant Safety Committee. Follow at all times GMPs (Good Manufacturing Processes) Perform a range of production support responsibilities, to include various appropriate machine adjustments and a range of maintenance tasks. Must be comfortable with the use of touch screen controls. Support start-up operations by stripping, preparing, setting and changing rolls, ink, or other raw materials to manufacture the product. Gather finished product from machines and box, bag or package as required First roll out quality check and on-going inspections checking the condition and quality of the finished product and remove any that do not meet our quality standards and confirm there are no process changes or quality issues. Maintain accurate count of product when packing or bagging, as well as, keeping pace with the varying production speeds/levels Secure cases to prevent shifting or moving by stacking them in an orderly manner The operator must have basic reading and math skills. Mechanical and problem solving abilities are necessary. Responsible for equipment set up and productivity. Check job order and set machine according. Learn and comply with Pratt Industries quality procedures and policies. Stop bad quality from leaving the facility to the Customer. Catch it on the front end of manufacturing the product. Strong attention to detail for poor quality; prevent bad quality being sent to customer. Maximize the utilization of equipment by operating the extruder or rewinder machinery at available capacity and speed. Improve set up times daily, improve downtime daily. Identify and address mechanical concerns and report to Production Supervisor or Production Manager or Plant Mechanical Tech/Specialist Housekeeping and cleaning of work areas - keep clean and free of tripping hazards during shift and end of shift cleaning of the area. In addition, good housekeeping of areas employee utilizes; break rooms, bathrooms, refrigerators etc. Learn and understand capability and capacity of machine and drive efficiencies limiting waste and downtime. Do not sacrifice quality for machine speeds - must have both excellent quality and high efficiencies with minimal downtime. Train and assist Assistant Machine Operators and Production Utility with job duties on the machine, downtime, setup times and quality. Complete necessary reports in an accurate and timely manner, including but not limited to: Production Data, Machine Operational Status, Safety Data, Quality Data. Cross-train on other machines and learn other positions in the plant. Switch duties with co-workers as necessary. Learning environment to learn as many job duties to assist with plant growth and personal and professional growth opportunities. Comply with all company policies and procedures, including safety and maintaining good housekeeping. Must be able to work overtime as necessary, sometimes on short notice. We serve our customers 24x7 - 365 days a year and sometimes work on holidays that are not avoidable. Additional duties may be assigned by management. EDUCATION and/or EXPERIENCE High school diploma or GED. Candidates are PREFERRED who offer the following: Prior work experience in the packaging industry; paper, plastics, converting 6 months' experience in some type of manufacturing operation. LANGUAGE SKILLS Able to read and follow instructions; quality, safety, job packets MATHEMATICAL SKILLS Able to read a tape measure with speed and accuracy. Able to calculate figures and amounts such as percentages, measurement, volume and rate. Able to apply concepts of high school math. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or graphic form. Ability to deal with problems involving one or more concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS May be required to maintain a current Lift Truck Operator License. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to stand, walk, and talk or hear. The employee frequently is required to use hands to finger, handle, or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee may occasionally be required to sit. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Who We Are Pretium Packaging is a leading designer and manufacturer of innovative packaging solutions for a diverse range of industries. We are dedicated to delivering high-quality products that meet the evolving needs of our customers while ensuring exceptional customer service at every interaction. Our commitment to excellence extends beyond our products; we also prioritize creating a positive and collaborative work environment that empowers our employees to thrive. By fostering a culture of innovation and continuous improvement, we aim to drive success for our clients and contribute to sustainable practices in the packaging industry. Machine Operator We are hiring for multiple Machine Operators to join our team. As a Machine Operator you will play a vital role in our manufacturing process. You will be responsible for setting up and operating machines, monitoring their performance, and performing routine maintenance tasks. In addition, you will be required to inspect finished products to ensure they meet quality standards and make adjustments as necessary. Key Responsibilities Set up and operate plastic molding machines according to established procedures. Monitor machines during operation to ensure proper functioning and make adjustments as necessary. Perform routine maintenance tasks on machines to ensure optimal performance. Inspect finished products for quality and make adjustments as necessary. Troubleshoot and resolve issues that may arise during production. Maintain inventory of raw materials and notify supervisor when supplies need to be replenished. Follow established safety protocols and maintain a clean and organized work area. Other duties as assigned. Qualifications and Skills High School diploma or equivalent. Previous experience operating plastic molding machines preferred. Strong understanding of plastic manufacturing processes and equipment. Mechanical training/aptitude and technical training on packaging, plastics and printing equipment. Ability to read and interpret technical drawings. Good manual dexterity and attention to detail. Ability to work effectively in a fast-paced environment. Strong problem-solving skills. Excellent communication skills, both verbal and written. What We Offer Full-Time, Direct Hire Position Competitive Salary Benefits Opportunities for professional growth and development. Collaborative work environment with a diverse team of professionals. Please apply on here or visit our website at: ************************************************************************************

United Direct Solutions is currently seeking a full time Machine Operator for 2nd at our Cincinnati, Ohio location. *****Must have Machine Operating experience***** 2ND SHIFT- Monday- Friday 4:00PM- MIDNIGHT United Direct Solutions has facilities in Louisville, KY and Cincinnati, OH , employs hundreds of individual workers and their hard work does not go unappreciated or unrewarded. Here are just a few benefits you will find as an employee: Competitive Pay Clean and Climate Controlled Facility Health, Dental and Vision Insurance; Life Insurance; 401(K) Career Development/Mentorship Opportunities Quick and Steady Advancement United Direct Solutions formerly United Mail named Best Workplace 2020 by Printing Industries of America United Direct Solutions formerly United Mail 40 Years of Commitment to Employees Saturday overtime as needed. Peak overtime required from Mid-September through Mid-December This position will report directly to the Production Supervisor and will be responsible for safely and efficiently operating mailing equipment to ensure the highest quality of processing for our customers. Essential Functions: Effectively perform mail equipment processing - converting post-press product into finished product by following job ticket instructions. Responsible for ensuring that mail equipment is operating efficiently while producing product that conforms to a quality standard. Accurately setup equipment to meet specific customer requirements. Perform and document quality checks to ensure compliance with company standards and customer specifications. Retrieve cores, boxes, and other supplies and materials for the equipment and daily operation. Inspect equipment for defects and perform general maintenance duties, as necessary. Ability to read and understand written instructions and job tickets, as well as comprehend verbal instructions. Maintain a clean and organized workspace. Participate in department meetings, training, and continuous improvement events. Other duties as assigned. Qualifications: High school diploma or GED required; One year of mail equipment experience or an equivalent combination of education and experience is preferred, but not necessary. Mechanical aptitude Basic math skills Ability to follow verbal and written instructions Job Type: Full-time Pay: From $18.50 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Paid time off Referral program Vision insurance Schedule: 10 hour shift 8 hour shift Evening shift Monday to Friday Night shift Overnight shift Weekends as needed Work Location: In person