Aircraft Mechanic jobs at AAR - 343 jobs

**Title:** Aircraft Inspector (A&P Licensed) **Job Number:** 17656 The aircraft inspector is responsible for performing assigned inspections on civil aviation articles in accordance with technical data provided by the manufacturers for continued airworthiness, service bulletins, service letters, airworthiness directives, government and industry standard practices ESSENTIAL DUTIES AND RESPONSIBILITIES Verifies work performed on aviation articles is performed in compliance with manufacturer manuals. Performs incoming, primary, hidden damage, in-process and final inspections. Review maintenance records, documentation, and logbooks to ensure all necessary repairs, inspections, Op-checks and documentation have been completed in accordance with the current approved technical data May be authorized to approve work performed for return to service. Perform task as assigned relating to the privileges granted under 14 CFR Part 65. Always observing company safety requirements while carrying out assigned tasks. All other duties as assigned. CORE COMPETENCIES Commitment to company values and ethics Dependability: personally responsible, completes work in a timely manner, and performs tasks accurately Motivation: must maintain a positive attitude and strong work energy Organization: very detail oriented and always comes prepared Communication: excellent interpersonal and oral and written communication skills Initiative: plans work and carries out tasks without detailed instructions, prepares for problems or opportunities in advance, undertakes additional responsibilities Strong judgment and decision making Analytical skills: must be able to gather information and use data to determine cause and effect for complex problem solving. Qualifications: QUALIFICATIONS FAA Certificated with Airframe and Powerplant rating. Experience involving inspection, inspection techniques, and inspection tools with responsibility for certifying airworthiness. Knowledge of FARs and Ability to apply and interpret Federal Aviation Regulations (FARs), Advisory Circulars, AC manuals, Policies, and procedures relating to aircraft maintenance and airworthiness. Three years experience in maintenance and repair of airframes, powerplants, and systems of aircraft with takeoff weight of more than 12,500 pounds Have been exercising their airmen privileges and actively engaged, for the last 2 years Meets physical requirements of the job including twisting, standing, sitting, bending, and climbing a latter and able to lift 50 pounds. Must read, write and understand the English language \#LI-VS1 We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Please note all applicants must be a current US resident. ESI is now hiring a Senior Aviation Maintenance Technician in the Stuart, FL area. ESI is seeking a Senior Aviation Maintenance Technician who is responsible for inspection, service, maintenance, troubleshooting and repair of most aircraft features. Candidate must meet certification and qualifications in accordance with FAA standards. Candidate must have the ability to work flexible hours and assume on-call status, to include nights and weekends, dependent upon operational needs. The Senior Aviation Maintenance Technician reports directly to the Chief Pilot. QUALIFICATIONS: Valid FAA Airman Airframe and Power Plant (A&P) License. Field experience conducting maintenance on rotary-wing aircraft. Knowledge of FAA inspection programs, regulations, and documentation requirements. Familiarity with FAA Forms and Airworthiness Directive log historical record-keeping systems. Experience with Airbus H-125 and/or Bell OH-58/206 series aircraft. Experience with SAFRAN Arriel 2D and/or Rolls-Royce 250 series type engines. Experience with avionics, and advanced mission equipment (hoist, cargo hook, etc.) Valid FAA Airman Inspection Authorization (IA) License. Ability to walk, stand, stoop, bend, push a cart, or lift during the entire shift Ability to lift up to 25 pounds, including small packages and supplies DUTIES AND RESPONSIBILITIES: Consistent attention and commitment to the agency's mission. Perform scheduled and unscheduled maintenance, inspections, and repairs on multiple certificated rotary-wing aircraft to the highest possible standards - to include compliance with FAA regulations, airworthiness directives, and manufacturer procedures. Maintain and update all required maintenance records, logbooks, and historical data for multiple certificated aircraft in an organized fashion, and in compliance with FAA regulations. Conduct troubleshooting and diagnostics on various aircraft systems and components. Conduct daily inspections of the duty aircraft to help ensure safety. Maintain records for all contracted maintenance provided by outside vendors for agency aircraft. Ensure compliance with all Federal Aviation Administration (FAA) regulations and safety standards. Establish and maintain an organized parts inventory for all in-stock and military surplus parts. Work with the on-duty pilot-in-command or Chief Pilot to complete all maintenance test flights and troubleshooting. Stay up to date on advancements in aircraft technology and participate in training programs as needed or required. Maintain cleanliness and organization of the aircraft, hangar, tools, maintenance consumables, and personal work areas. Assist the Chief Pilot with budgetary forecasting and requirements for all maintenance related items. Perform any other duties as directed by the Chief Pilot. For immediate consideration, please email your resume directly to our recruiter, Craig Martinov, at ******************, and include in the subject line: Senior Aviation Maintenance Technician, Stuart, FL. ESI COMPANY SUMMARY: ESI provides comprehensive human resource services for its partner organizations. This includes recruiting, staffing, screening, on boarding, payroll, and benefits administration. Founded in 2015, ESI has carefully crafted our company culture and reputation based on a deep understanding that staffing is first and foremost about people. We understand the right placement in the right job changes lives. ESI is committed to providing simplified employment solutions through our superior work ethic and industry experience. It is our mission to treat every person we encounter with wholehearted integrity and dedication.

The aircraft inspector is responsible for performing assigned inspections on civil aviation articles in accordance with technical data provided by the manufacturers for continued airworthiness, service bulletins, service letters, airworthiness directives, government and industry standard practices ESSENTIAL DUTIES AND RESPONSIBILITIES Verifies work performed on aviation articles is performed in compliance with manufacturer manuals. Performs incoming, primary, hidden damage, in-process and final inspections. Review maintenance records, documentation, and logbooks to ensure all necessary repairs, inspections, Op-checks and documentation have been completed in accordance with the current approved technical data May be authorized to approve work performed for return to service. Perform task as assigned relating to the privileges granted under 14 CFR Part 65. Always observing company safety requirements while carrying out assigned tasks. All other duties as assigned. CORE COMPETENCIES Commitment to company values and ethics Dependability: personally responsible, completes work in a timely manner, and performs tasks accurately Motivation: must maintain a positive attitude and strong work energy Organization: very detail oriented and always comes prepared Communication: excellent interpersonal and oral and written communication skills Initiative: plans work and carries out tasks without detailed instructions, prepares for problems or opportunities in advance, undertakes additional responsibilities Strong judgment and decision making Analytical skills: must be able to gather information and use data to determine cause and effect for complex problem solving. QUALIFICATIONS FAA Certificated with Airframe and Powerplant rating. Experience involving inspection, inspection techniques, and inspection tools with responsibility for certifying airworthiness. Knowledge of FARs and Ability to apply and interpret Federal Aviation Regulations (FARs), Advisory Circulars, AC manuals, Policies, and procedures relating to aircraft maintenance and airworthiness. Three years experience in maintenance and repair of airframes, powerplants, and systems of aircraft with takeoff weight of more than 12,500 pounds Have been exercising their airmen privileges and actively engaged, for the last 2 years Meets physical requirements of the job including twisting, standing, sitting, bending, and climbing a latter and able to lift 50 pounds. Must read, write and understand the English language #LI-VS1

The A&P Mechanic - G650 is responsible for performing high-level maintenance, inspections, troubleshooting, and repairs on the G650 aircraft. This position supports a VIP/ VVIP aviation environment that requires exceptional technical expertise, meticulous attention to detail, and the highest standards of safety, confidentiality, and professionalism. The ideal candidate has advanced experience with the G650 platform, knowledge of G650-specific systems and modifications, and the ability to maintain both airframe and cabin systems to meet elevated customer expectations. Key Responsibilities Aircraft Maintenance & Repair Perform scheduled and unscheduled maintenance on the G650, including A/B checks, cabin systems maintenance, and Gulfstream-specific modifications. Conduct inspections and repairs on high-end interiors, cabin management systems (CMS), entertainment systems, lighting, galley equipment, and VIP-customized installations. Execute component replacements, SB/AD compliance, structural repairs, and configuration-controlled cabin changes per BBJ documentation. Support AOG recovery and rapid-response troubleshooting in remote or international locations as needed. Regulatory Compliance & Documentation Ensure all maintenance actions comply with FAA regulations, company procedures, and Gulfstream-specific maintenance programs. Accurately document work performed in digital maintenance tracking systems and aircraft logbooks. Review and apply service bulletins. Coordinate with Quality Assurance for inspections, major repairs, and return-to-service authorization. Inspection, Diagnostics & Troubleshooting Perform detailed inspections of airframe, powerplant, avionics, and high-touch cabin systems unique to G650 configuration. Utilize advanced diagnostic equipment and built-in test systems (BITE) to identify and resolve discrepancies. Conduct borescope inspections on LEAP-1B engines, APU troubleshooting, and avionics system evaluations. VIP Cabin, Interior & Special Systems Support Maintain and repair VIP furnishings, luxury materials, cabinetry, and premium finishes. Troubleshoot and support Cabin Management Systems (CMS), satellite communications, Wi-Fi, Blu-ray/AV systems, and aircraft internet hardware. Work closely with flight crews and cabin staff to ensure the aircraft meets VVIP standards of comfort and functionality. Safety, Quality & Operational Excellence Uphold the highest levels of safety, confidentiality, and customer service expected in VIP aviation environments. Support continuous improvement of maintenance processes, reliability programs, and long-term fleet health monitoring. Maintain a clean, organized workspace and strictly follow OSHA, company, and regulatory safety protocols. Coordinate with operations, flight crew, engineering, and supply chain for aircraft readiness and mission reliability. Required Qualifications Valid FAA Airframe & Powerplant (A&P) Certificate. 3-5+ years of experience maintaining G650 platforms. Strong experience with: G650 interior and cabin systems Digital maintenance platforms (AMOS, TRAX, CMP, or equivalent) VIP cabin repairs, CMS systems, and premium interiors Ability to read and interpret data, manuals, engineering drawings, and wiring diagrams. Capable of working in high-standards VIP or corporate aviation environments. Must possess an active Secret (or TS/SCI) security clearance or be eligible to obtain one. Preferred Qualifications G650 Maintenance Training Certification. Prior experience with VVIP fleet operators, corporate aviation, charter, or government executive transport. FCC License, NCATT or avionics endorsements, or AET certifications. AOG experience with international travel capability. Strong understanding of cybersecurity and data sensitivity for VIP aircraft systems. This position does not offer relocation assistance; local candidates are preferred. Core Competencies Extreme attention to detail and craftsmanship High professionalism and discretion Strong troubleshooting and diagnostic capability Excellent communication and teamwork Ability to adapt in high-tempo VIP operations Customer-service mindset for VVIP standards

This job is with Encode, Inc a fully owned subsidiary of Lancesoft •Perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring •Ability and understanding of routing instructions and handling of harnesses. •Perform sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes •Read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modifications and repairs •Use tooling assemblies and fixtures for depot level modification and repair of electrical wiring •Perform assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft •Troubleshoot organizational and depot maintenance level malfunctions in aircraft electrical and comms/nav-systems •Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc... •Use all equipment in accordance with established safety and operating procedures. •Perform all tasks involved in the coordination, preparation, and movement of material and tools •Operate riding type electric powered elevating equipment to accomplish work assignments •Maintain necessary certifications, licenses and permits as required for assigned work. •Perform all duties of lower Electrical classifications as required to successfully accomplish assignments Ability to perform the following requirements: •The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds. •Exposure to noise, working on elevated platforms •Use personal protective gear for face, eyes, ears, hand, and arms as required. •Pass visual acuity and color perception tests •Read, write, and comprehend the English language •Handle, use, and dispose of hazardous material •Obtain & maintain training certifications as required to support assignment responsibilities •Occasional (1 to 3 hrs) finger manipulation •On occasion, a 2-person lift may be necessary for weights greater than 50 lbs •Frequent reaching overhead (3 to 6 hrs) •Frequent walking on flat surfaces •Frequent standing flat or uneven surfaces •Frequent balancing on a ladder, steps, or uneven surfaces •Occasional climbing on 3-12 ft ladders or stands •Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls for an extended period of time •Occasional contact with metals •Frequent exposure to noise Basic Qualifications (Required Skills/Experience): •10+ years of experience with electrical/electronic theories and avionics systems, shop mathematics and practices •10+ years of experience in working with schematics, specifications, assembly drawings and standard operating procedures. •10+ years of experience with component and wire installation to include repairing, modifying, testing and troubleshooting new, experimental, and disturbed systems •Experience with fabricating new wire bundles •Experience with routing and installing wire bundles on airplanes without existing wiring (commercial routing experience preferred) •Ability to work variable shifts including weekends and overtime Preferred Qualifications (Desired Skills/Experience): •Experience with Avionics •Experience with Depot Level/Modification maintenance. •Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment •FAA certification in Airframe and/or Power Plant

Performs on and off aircraft electrical modification to electrical wiring and system components Perform complex connector terminations including shielded wires, coaxial cables and fiber optic wiring. Understand wire handling and routing instructions. Perform sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes. Demonstrate technical ability to read and interpret engineering drawings, technical orders, process specifications, and retrofit requirements to perform electrical modification/repair. Adhere to government and company procedural guidance, perform assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft work. Troubleshoot malfunctions in aircraft electrical and environmental systems of moderate difficulty at the organizational or depot maintenance level. Performs aircraft bench and/or flight line operational testing and troubleshooting in accordance with DOD, manufacturer, company, supplier and other directives. Performs assembly, installation, check-out physical characteristics, operational testing and modification of wire bundles in the testing, development and modification of aircraft in accordance with DOD, manufacturer, company, supplier and other directives. Responsible for the proper performance of assignments and the prudent handling of product, tools and equipment. Required to consult with management and peers to assess best work process. Will assist and train less senior employees. May be required to lead teams through more complex aircraft relevant tasks. Able to prioritize workload to maintain schedules on assigned projects. Perform all duties of lower Electrics classifications as required to successfully accomplish assignments. Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc. To accomplish assigned work. Ensure that all equipment is used in accordance with established safety and operating procedures. Diagnose and correct malfunctions occurring in assembly processes. Use any and all precision measuring instruments, gauges, tools, etc., necessary to check dimensions and conformance to quality requirements. Maintain necessary certifications, licenses and permits as required for assigned work. Able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds. Able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime Must be familiar with Hazardous Energy and Lock Out /Tag systems applications to ensure working environment is deemed safe for access and on the job performance. Will be required to assist other team members (General Mechanics, Structures, Avionics) in order to ensure cost/schedule targets are met. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at San Antonio. Candidate maybe be required to travel up to 25%. This position requires the ability to pass assessment during the training cycle. This position requires adherence to the SA Tool and FOD procedures. Ability to perform the following physical requirements: The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds. Exposure to noise, working on elevated platforms Use personal protective gear for face, eyes, ears, hand, and arms as required. Pass visual acuity and color perception tests Experience understanding and interpreting detailed written and verbal work instructions and processes Handle, use, and dispose of hazardous material Obtain & maintain training certifications as required to support assignment responsibilities Occasional (1 to 3 hrs) finger manipulation On occasion, a 2-person lift may be necessary for weights greater than 50 lbs Frequent reaching overhead (3 to 6 hrs) Frequent walking on flat surfaces Frequent standing flat or uneven surfaces Frequent balancing on a ladder, steps, or uneven surfaces Occasional climbing on 3-12 ft ladders or stands Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls for an extended period of time Occasional contact with metals Frequent exposure to noise BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE): Position requires 4+ years of experience in those duties as previously described for satisfactory performance. Position requires 4+ years of experience/knowledgeable in electrical/electronic theories and systems sufficient to perform assigned duties. Experience with fabricating new wire bundles Experience with routing and installing wire bundles on airplanes without existing wiring (commercial routing experience preferred) Ability to work rotating shift (1st, 2nd or 3rd) PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE): Experience with Depot Level/Modification maintenance. Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.

Yulista Contract Services LLCRegularPRIMARY FUNCTION:The T-38 Aircraft Maintenance Technician maintains all aspects of the T-38 aircraft, support equipment, and forms and records. This role performs crew chief, repair and reclamation, quality assurance, maintenance support functions, sortie generation, ground handling, and servicing operations. In addition, they will be responsible for performing aircraft inspections such as preflight, thru-flight, postflight, hourly postflight, special inspections, and isochronal inspections. They will also, advise on problems, maintenance, servicing, and inspection of aircraft and related aerospace equipment and utlize technical data to diagnose and solve maintenance problems on aircraft systems.ESSENTIAL FUNCTIONS Inspects, troubleshoots, and maintains aircraft structures, engines, hydraulic, and other related systems, components, and equipment. Assists in launching and recovering aircraft. Removes and installs T-38 aircraft assemblies, engines, and engine components. Conducts operational checks and repairs / replaces damaged components and systems. Performs T-38 ground engine operations. Adjusts, aligns, and rigs aircraft systems. Accomplishes aircraft weight and balance functions. Performs T-38 aircraft jacking, lifting, mooring, and towing operations. Interprets inspection findings and determines adequacy of corrective actions. Inspects and checks components for clearances, tolerances, proper installation, and operation. Interprets inspection findings and determines adequacy of corrective actions. Inspects and checks components for clearances, tolerances, proper installation, and operation. Inspects and identifies aircraft corrosion for prevention and repair. Reviews maintenance data collection summaries to determine trends and production effectiveness. Performs crash recovery duties. Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation. Performs pre-use inspections and operates powered and non-powered aerospace ground equipment. Inventories and maintains aircraft mission equipment. May be required to perform entry and maintenance tasks in confined spaces. Recommends methods to improve equipment performance and maintenance procedures. Uses automated maintenance systems. Inputs, validates, and analyzes data processed to automated systems. Inspects, clears, and closes out completed maintenance discrepancies in automated maintenance systems. Document maintenance as per Quality Assurance (QA) and established regulatory requirements. Stores, handles, and disposes of hazardous waste and materials according to environmental standards and company processes. Inventories and maintains alternate mission equipment. Inventories and maintains aircraft equipment. Use automated maintenance systems to monitor maintenance trends, analyze equipment requirements, maintain equipment records, document maintenance actions, and time change database. Perform regular Foreign Object Damage (FOD) walks. Maintain strict tool control procedures. Report missing, lost, found, or unattended tools to the supervisor. Inventory and inspect tools on a regular basis and replace worn or broken tools. Comply with safety rules and regulations while performing day to day maintenance. Promptly report all accidents, injuries, safety violations, and/or unsafe practices or procedures to supervisor. Maintain equipment records. Enter in the maintenance records description of the work performed and verify the work was performed satisfactorily. The T-38 Aircraft Maintenance Technician will be required to perform other related duties to meet the ongoing needs of the organization. SUPERVISORY RESPONSIBILITIESThis position has the responsibility and authority to carry out assigned tasks.KNOWLEDGE, SKILLS, & ABILITIES: Knowledgeable in principles applying to T-38 aircraft systems Knowledgeable in T-38 theory of aircraft flight, hydraulic principles, aircraft electrical concepts, and servicing concepts. Ability to read and interpret documents such as engineering drawings, technical documentation, operating and maintenance instructions, and procedure manuals. Good decision analysis and problem-solving skills. Ability to draw conclusions and justify decisions. Must be able to communicate issues to management. Proficient in T-38 aircraft safety and servicing processes. Knowledgeable in Air Force Technical Order system, supply procedures, and deficiency reporting procedures. Intermediate computer skills specifically using Microsoft Office Suite. Ability to learn additional computer skills or software programs. Working knowledge of advanced software applications is preferred. Ability to enter data accurately into databases and write routine reports and correspondence. Interpersonal skills are necessary to work effectively and cooperatively with all levels of management and staff. Will also routinely interact with other crew members. Must possess effective oral and technical written communication skills to clearly communicate information to others. Ability to use general office equipment such as fax, phone, copier, scanner, printers, etc. Ability to follow processes. Professional customer service skills, including active listening, prompt service and follow-up. Ability to learn and understand corporate policies and procedures and how they relate to Yulista goals. Ability to perform basic mathematical computations. Self-motivated and the ability to work independently. Willingness to assist teammates in accomplishing task. Able to multi-task. QUALIFICATIONS: High School Diploma or equivalent required. 5+ years of tactical Aircraft Maintenance experience with fixed / rotary wing commercial, Government or DOD aircraft. Previous Air Force Specialty Code 2A3X3 Tactical Aircraft Maintenance or 2A5X1 Airlift/Special Mission Aircraft Maintenance experience highly desirable. Multi aspect aviation qualifications / certifications / disciplines and abilities. Experience supporting DoD contracts. Knowledge of commonly used concepts, practices, and procedures within depot level maintenance. Background in TCTO application a plus. Federal Aviation Administration (FAA) Airplane and/or Powerplant certification a plus Must have the ability to obtain and maintain a Government Security Clearance. WORKING ENVIRONMENT: A fast-paced multi-tasking customer service-oriented environment requiring a high degree of efficient and effective performance. Adaptability regarding schedule and task changes is necessary to accommodate changing priorities. Overtime may be required. PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.

Company: Boeing Aerospace Operations Our Maintenance, Repair, and Overhaul (MRO) Jacksonville and Component Operations facility is seeking General Mechanics that are motivated to support a greater cause in directly impacting military warfighter readiness by providing critical maintenance repairs and modifications for our military customers. We are proud knowing the products we return to service will strengthen global security. As a Boeing employee, you will have access to an industry leading benefits packages, employee incentive programs and educational assistance. You will also have access to many resources to inform and support your development throughout your career with us. While we work in an agile and dynamic MRO environment, your wellbeing is important to us and we strive to find a healthy work / life balance, as well as, an ethical team culture with a strong emphasis on openness, collaboration, innovation, safety, and first-time quality. The professionals chosen to fill these positions will join our MRO and Component Operations organization, working as part of a team in support of our key programs such as military commercial derivatives, fighter aircraft and aircraft component maintenance, repair, and overhaul. The candidates chosen will be responsible for adherence to established processes, accurate and timely work recording and contractual/regulatory compliance. To ensure we continue to support our customers, we are looking for skilled aircraft maintenance professionals to join our team. Successful applicants will be based in Jacksonville, Florida. Position Responsibilities: Perform efforts associated with sealing, painting, shimming, and preserving structure and systems in accordance with standard repair processes. Perform component installations, ceiling, sidewall panels, flight controls and other hydraulic components. Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair. Use of tooling assemblies and fixtures for depot level modification and repair of structural parts. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests. Maintain necessary certifications, licenses and permits as required for assigned work. The candidate must be able to ascend and descend vertical work ladders, and work in confined spaces. Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime. General Responsibilities: Strive for an efficient work effort in all assigned tasks Strive for First Time Quality on all assigned work Follow the guidance and direction from lead, and senior Subject Matter Experts (SME) Execute all duties while wearing required safety equipment Complete required company and specific statement of work training requirements Maintain necessary certifications, licenses and permits as required for assigned work. Demonstrate a safe work ethic Perform detailed tool inventories daily Communicate using basic computer systems including but not limited to Microsoft Office as needed to complete essential job requirements Contribute positively to our open and honest reporting culture Report all incidents and occurrences in the Boeing Safety Management System. Ensure compliance with regulatory requirements, company processes and procedures Maintain a high standard of organization and cleanliness within assigned work areas, “Clean as You Go” Contribute to continuous improvement initiatives Be flexible to ensure aircraft are delivered on time to customer Perform other duties as directed by management for the benefit of the company, program or employee(s) Can perform the above tasks with little or general supervision GFD5IB (Associate Level; Can perform the above tasks with little or general supervision) GFD5IC (Experienced Level; Can perform the above tasks with no supervision and can assist others) Basic Qualifications (Required Skills/Experience): 3+ years of experience with F/A-18 maintenance and/or modification 3+ years of experience working as an aircraft mechanic 3+ years of experience or reading and understanding engineering drawings, blueprints, schematics, and specifications Willing and able to work any shift (Must be able & willing to work various shifts and / or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays; mission requirements and / or workload may require both scheduled and unscheduled overtime) Preferred Qualifications (Desired Skills/Experience): Knowledge of general aircraft maintenance and environment processes (Human Factors, FOD control, tool control, health & safety & COSHH) Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for 1st and/or 2nd shift; candidates must be able to work either shift. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: Associate (GFD5IB) - $57,800 - $78,200 Experienced (GFD5IC) - $68,000 - $92,000 Language Requirements: Not Applicable Education: Not Applicable Relocation: Relocation assistance is not a negotiable benefit for this position. Export Control Requirement: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 4 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

Y-Tech Services IncRegular Description: The Aircraft Mechanic I inspects, troubleshoots malfunctions, rigs, repairs, and modifies aircraft structures, structural components, and aircraft systems of moderate difficulty, maintains and repairs aircraft components including but not limited to landing gear, flight surfaces and controls, anti-icing, engines, hydraulics, pneumatics, fuel systems, ventilation, heating and cooling systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation; applies comprehensive technical expertise to solve moderate to complex problems. This worker reads and interprets manufacturers' and airlines' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components. TThis work shift may require the selected candidate to work the first, second, or third shift as required. Basic Qualifications: Individuals must have a thorough knowledge of aircraft mechanical components with the ability to troubleshoot, adjust, repair, and replace parts/components; requires a broad working knowledge of C-130J/H aircraft systems including hydraulics, structures, engines, refuel pods, and electrical systems. Experience performing periodic, and other hourly, special, or calendar inspections. Basic knowledge of electrical theory and thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, and powered/non-powered support equipment. Proficient with using USAF Technical Orders, the Data Transfer and Diagnostic System (DTADS), documentation of AFTO 781 forms, and entering data into the Integrated Maintenance Data System (IMDS). Experience with aircraft launch/recovery, performing preflight, thru-flight, and basic post-flight and corrosion inspections. Prior experience as Refuel/Defuel, Aircraft Jack, and Tow Team Supervisor. Prior experience performing other miscellaneous aircraft services including but not limited to Lox, Hydraulic, and Engine Oil, service aircraft tire/struts, and must be familiar with handling HAZMAT/HAZWASTE materials. Desired Skills: Six (6) years of experience on C-130 aircraft as a 2ASX1. Performed as 7-Level Aircraft Mechanic or equivalent. Advanced Systems School Basic C-130J aircraft system knowledge. Ability and desire to perform on aircraft engine runs (if required) to determine engine performance Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration. Other Important Information Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Schedule for this Position: Non- standard 40 hour work week as assigned by leader PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.

Job Description GENERAL DESCRIPTION Responsible for performing maintenance, inspections, and repairs on CH-47 aircraft, ensuring operational readiness and safety. This position plays a critical role in supporting flight operations and requires a strong technical skill set in helicopter systems, components, and safety procedures. This position may require up to 25% travel. DUTIES Conduct scheduled and unscheduled maintenance on CH-47 aircraft. Perform troubleshooting and repairs on all aircraft systems. Perform routine inspections and pre-flight/post-flight inspections in support of flight operations. Maintain records and maintenance actions in accordance with service guidance. Use specialized tools and diagnostic equipment in support of maintenance operations. Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS High school diploma or equivalent required Graduate of a military aircraft repairer school for CH-47 aircraft. FAA A&P license is preferred. Minimum of 6 years of experience in aircraft maintenance on rotary wing aircraft. Must be a U.S. Citizen Must have or be able to obtain a Secret Clearance Must be willing to travel up to 15% PHYSICAL REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands, working at heights with fall protection devices Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift up to 50 pounds and carry for short distances. May be required to read dials/gauges, identify small objects and hand tools. Must be able to see imperfections, micrometer readings and other small scales. Must be able to communicate by voice and detect sound by ear. Must be able to distinguish color and judge three-dimensional depth. May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc. EQUAL OPPORTUNITY EMPLOYER/ VEVRAA/ ADA TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Employment Opportunity Employer and a VEVRAA governed Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities. TNC provides all employees and job applicants equal employment opportunities in hiring and promotion without regard to age, sex, sexual orientation, marital status, race, religion, color, veteran status, genetic information, physical or mental disability, national origin or any other reason prohibited by law. #jsfirm TSG maintains a drug-free workplace and perform post offer, pre-employment and random substance abuse testing. Job Posted by ApplicantPro

GENERAL DESCRIPTION Responsible for performing maintenance, inspections, and repairs on CH-47 aircraft, ensuring operational readiness and safety. This position plays a critical role in supporting flight operations and requires a strong technical skill set in helicopter systems, components, and safety procedures. This position may require up to 25% travel. DUTIES * Conduct scheduled and unscheduled maintenance on CH-47 aircraft. * Perform troubleshooting and repairs on all aircraft systems. * Perform routine inspections and pre-flight/post-flight inspections in support of flight operations. * Maintain records and maintenance actions in accordance with service guidance. * Use specialized tools and diagnostic equipment in support of maintenance operations. * Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS * High school diploma or equivalent required * Graduate of a military aircraft repairer school for CH-47 aircraft. * FAA A&P license is preferred. * Minimum of 6 years of experience in aircraft maintenance on rotary wing aircraft. * Must be a U.S. Citizen * Must have or be able to obtain a Secret Clearance * Must be willing to travel up to 15% PHYSICAL REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. * Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day. * Must be able to climb stairs, ramps, ladders, and work stands, working at heights with fall protection devices * Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. * May be required to lift up to 50 pounds and carry for short distances. * May be required to read dials/gauges, identify small objects and hand tools. * Must be able to see imperfections, micrometer readings and other small scales. * Must be able to communicate by voice and detect sound by ear. * Must be able to distinguish color and judge three-dimensional depth. * May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc. EQUAL OPPORTUNITY EMPLOYER/ VEVRAA/ ADA TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Employment Opportunity Employer and a VEVRAA governed Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities. TNC provides all employees and job applicants equal employment opportunities in hiring and promotion without regard to age, sex, sexual orientation, marital status, race, religion, color, veteran status, genetic information, physical or mental disability, national origin or any other reason prohibited by law. #jsfirm TSG maintains a drug-free workplace and perform post offer, pre-employment and random substance abuse testing.

Company: The Boeing Company Boeing Commercial Airplanes (BCA) is seeking Aircraft Assembly Mechanics (Level B or C) to support the 787-production system as an electrical, system, or seal/wing mechanic in North Charleston, South Carolina on a variable shift. This role offers an exciting opportunity within a dynamic manufacturing assembly environment. Team members will leverage their prior experience, along with the knowledge gained through foundational training and certifications, to complete daily assigned tasks safely and with quality. Individuals will be responsible for identifying parts and tooling within their work locations on advanced airplanes by interpreting technical drawings to accurately complete detailed work instructions. Attention to detail and strict compliance with procedures are critical to correctly identify all necessary hand tools, parts, and equipment required to ensure defect-free work. This position is physically demanding, and employment is contingent upon successful completion of foundational training requirements. This is not just a job-it's an opportunity to build a career while contributing to the future of aviation as part of an innovative team! Primary Responsibilities: Safety: Adhering strictly to all safety protocols and guidelines to protect ourselves, our colleagues, and our workplace. Safety is non-negotiable and must be integrated into every task we perform. Quality: Maintaining rigorous quality standards in all deliverables, ensuring that our work meets or exceeds expectations and complies with all regulatory and company requirements. Must successfully complete the new hire foundational training to obtain and maintain all required certifications. Proficient use of a computer in a dynamic production environment. Look up/read/comprehend electronic technical work instructions, drawings and/or specifications. Wear appropriate protective clothing/equipment determined by the task performed. Operate various mechanical lifts (e.g. ladders, tiger and snorkel lifts). Use various hand tools and diagnostic equipment such as screwdrivers, ratchets, power screwdriver multi meters, continuity testers. Apply chemical solvents, sealants, coatings, primers, adhesives, paints and special finishes. Inspect your work quality and check for Foreign Object Debris. Work around energized sources (electrical equipment and hazards/shock, e.g. circuit breakers and wiring) and exposure to constant noise. Finger manipulation (keyboarding, other). Lifting and carrying up to 10-35 pounds. Climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), crawling, crouching (squatting). Flexion/Extension (head bent down, head bent back), handling, kneeling, bending at the waist, reaching (overhead), rotation of head/neck, standing, twisting at the waist and walking. Install various aircraft system components and wiring such as: tubing, valves, regulators, actuators, compressors, ducts, and interior components. Route wire harnesses to supports, install connectors to receptacles and electronic components. Fiber optic clean and inspection, light loss testing, routing and installation. Work in confined space and respirator usage. This position is expected to be 100% onsite. The selected candidate will be required to work onsite. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete an assessment as part of the selection process. You will receive an email invitation at the address you provided in your application. From the date of the invitation, you will have 5 days to complete the assessment. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/ Experience): Ability to work a variable shift as noted further below. Ability to meet physical demands of the role such as flexion and extension (head bent down, head bent back), handling, kneeling, bending at the waist, reaching overhead, rotation of head/neck, standing, twisting at the waist and walking, climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), crawling, crouching (squatting). Ability to lift/carry up to 10-35 pounds. Ability to work with high-hazard chemicals. Ability to complete and maintain Confined Space and Fall Protection certifications, as required. 1+ years of experience using software applications such as internet navigation, email, Microsoft Office Suite, and/or other specialized computer applications. 1+ years of experience following detailed work instructions, reading and interpreting blueprints, drawings, or specifications, in English. 1+ years of experience applying mathematical calculations. 1+ years of experience in a technical, or mechanical field performing work with basic hand, power, and/or pneumatic (air) tools. Preferred Qualifications (Desired Skills/Experience): 3+ years of related work experience or an equivalent combination of education and experience. 3+ years of experience installing various aircraft system components such as tubing, valves, regulators, actuators, compressors, ducts, and interior components. 3+ years of experience in Automotive/Diesel/Heavy equipment mechanical experience. 3+ years of experience wire routing, dressing, hook-up/mating connections. 3+ years of experience applying sealant to required surfaces per specifications. Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for a variable shift (shift 4). Variable shift means you will be placed on a shift at the time of hire based on business needs at that time. You will remain on that shift until re-evaluation is needed. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $54,000 - $64,000 Summary pay range: $61,200 - $64,500 When Applying: Please review every aspect of your application carefully prior to submitting to ensure accuracy. If you have formal education or military experience in the field you are applying for please include that time in your total years of experience. Prior to uploading your resume, please ensure it is in one of the following formats: DOC, DOCX, PDF, or TXT. Use your most accurate contact information on your application to include your full address. Language Requirements: Not Applicable Education: Not Applicable Relocation: This position offers relocation based on candidate eligibility. Export Control Requirement: Safety Sensitive: Security Clearance: This position does not require a Security Clearance. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 4 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

Yulista Contract Services LLCRegular Primary Function Provide full on-site / off-site maintenance flight/Functional Check Flight operations, phase maintenance to support US Army Ft Rucker. The support will be conducted in accordance with current Army directives, including but not limited to, AR 95-1 and AR 95-20. Areas for support to be provided include completion of all maintenance test flights, fault isolation and troubleshooting, phase maintenance, and phased maintenance processes. Essential Duties Provide aviation maintenance and repair services, as well as developmental and operational test and evaluation support, to include testing of aircraft, aviation systems and associated support equipment Must have analytical ability combined with knowledge and application of assurance principles and techniques. Organizational/intermediate level maintenance, phase maintenance support Other duties as assigned Supervisory Responsibilities NA Desired Knowledge, Skills & Abilities Must have experience in all aspects or safety, documentation, HAZMAT, training/licenses/certifications, scheduling, production control and management. Must have analytical ability combined with knowledge and application of assurance principles and techniques. Required Qualifications High school diploma or equivalent required Requires either FAA A&P license or have completed a military helicopter repairer school Minimum of 6 years' experience in aircraft maintenance in rotary wing aircraft Army Aviation maintenance Must have Military installation organizational, intermediate level maintenance experience Must be eligible to work in the United States Must satisfy pre-employment background check Must be able to obtain and maintain an active security clearance Applicants must pass an Aircraft Mechanic skills assessment. PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.

D2 Government Solutions (D2GS) is seeking an experienced Aircraft Mechanic III to join our F-22 Wash and Corrosion Control team at Joint Base Langley-Eustis. The selected candidate will perform complex maintenance, inspection, and corrosion control tasks on F-22 Raptor aircraft, ensuring full compliance with Air Force Technical Orders and D2GS quality standards. Responsibilities: Perform scheduled and unscheduled wash and corrosion control services on F-22 aircraft. Conduct inspections and perform advanced maintenance on structural, hydraulic, pneumatic, and landing gear systems. Lubricate and service aircraft landing gear, replace Zerk fittings, and perform canopy waxing per Technical Orders. Operate tow tractors and direct aircraft towing operations in compliance with safety and TO requirements. Document all work in AFTO 781 forms and maintenance systems; immediately report discrepancies to the Production Superintendent. Provide technical oversight and guidance to Aircraft Mechanic Helpers. Adhere to strict Foreign Object Damage (FOD) and Dropped Object Prevention (DOP) procedures. Maintain compliance with OSHA, AFOSH, environmental regulations, and JBLE safety standards. Qualifications: High school diploma or equivalent required; technical school or A&P certification preferred. Minimum of 5 years of aircraft maintenance experience, preferably on fighter-class aircraft. Strong understanding of corrosion control, lubrication systems, and aircraft ground handling procedures. Must be able to pass a federal background check Ability to read, interpret, and apply Technical Orders Ability to work outdoors in various weather conditions and lift up to 50 lbs. About D2 Government Solutions D2GS is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Visit us on the web at ************* to learn more.

D2 Government Solutions (D2GS) is seeking motivated Aircraft Mechanic Helpers to assist in the execution of F-22 Wash and Corrosion Control services at Joint Base Langley-Eustis. This entry-level role provides essential support to senior mechanics and is a great opportunity to gain hands-on experience in a highly specialized aircraft maintenance environment. Responsibilities: Assist Aircraft Mechanic III personnel during F-22 wash, lubrication, and corrosion control operations. Prepare aircraft for servicing by installing protective covers, taping seams, and masking sensitive areas. Perform routine cleaning and washing tasks using TO-approved cleaning compounds. Provide ground support during towing operations, including serving as wing/tail walkers. Handle tools, materials, and equipment in support of senior mechanics. Maintain clean and organized work areas while following FOD/DOP requirements. Document assistance tasks and ensure compliance with safety and quality control requirements. Qualifications: High school diploma or equivalent. Minimum of 1 year of general mechanical, maintenance, or related work preferred. Ability to follow detailed instructions and work as part of a team. Must be able to pass a federal background check Willingness to work outdoors in varying conditions and lift up to 50 lbs. Desire to grow within the aircraft maintenance career field. About D2 Government Solutions D2GS is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Visit us on the web at ************* to learn more.

GENERAL DESCRIPTION Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. DUTIES Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills Reads and interprets manufacturers' service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Work involves replacing or repairing worn or damaged components, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects Repairs or replaces defective engine parts and reassembles and installs engine in aircraft Adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes Supervises the jacking and towing of aircraft Enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily Services engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition Specializes in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair May require specialization in sheet metal, electric work, avionics or other aircraft systems related disciplines Will require the use of HVLP spray gun and various other corrosion control tooling Work will be accomplished on and off aircraft depending on specific requirements Work different shifts potentially Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS High school diploma or equivalent is required Must have a minimum of two (2) years of experience on the C-130H/J variant aircraft May be required to be licensed by Federal Aviation Administration Must be a U.S. Citizen We maintain a drug-free workplace and perform post offer, pre-employment and random substance abuse testing PHYSICAL REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands, working at heights with fall protection devices. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift up to 50 pounds and carry for short distances. May be required to read dials/gauges, identify small objects and hand tools. Must be able to see imperfections, micrometer readings and other small scales. Must be able to communicate by voice and detect sound by ear. Must be able to distinguish color and judge three-dimensional depth. May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc. Expected to work in high heat or extreme cold temperatures for extended periods of time. May operate in austere CONUS and OCONUS locations. Ability to wear a full face or forced air respirator. Ability to work in confined spaces. Availability/ability to work different shifts if needed EQUAL OPPORTUNITY EMPLOYER/VEVRAA/ADA TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Employment Opportunity Employer and a VEVRAA governed Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities. TNC provides all employees and job applicants equal employment opportunities in hiring and promotion without regard to age, sex, sexual orientation, marital status, race, religion, color, veteran status, genetic information, physical or mental disability, national origin or any other reason prohibited by law.

Job Description GENERAL DESCRIPTION Aircraft Mechanics II must have a combination of experience to repair Fuel systems, engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. DUTIES Maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, shall occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. Provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). May require specialization in sheet metal, electric work, avionics or other aircraft systems related disciplines May require the use of HVLP spray gun and various other corrosion control tooling. Work will be accomplished on and off aircraft depending on specific requirements. Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS High school diploma or equivalent is required Must have a minimum of two (2) years of experience on the C-130H/J variant aircraft May be required to be licensed by Federal Aviation Administration CPR Qualified is a preference Trained on the proper use, inspection, and wear of personal protective clothing and equipment is required Trained on the use of communication equipment is preferred Familiarity with recognizing symptoms of overexposure to chemicals, solvents, and fuels Must be a U.S. Citizen We maintain a drug-free workplace and perform post offer, pre-employment and random substance abuse testing. PHYSICAL REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands, working at heights with fall protection devices. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift up to 50 pounds and carry for short distances. May be required to read dials/gauges, identify small objects and hand tools. Must be able to see imperfections, micrometer readings and other small scales. Must be able to communicate by voice and detect sound by ear. Must be able to distinguish color and judge three-dimensional depth. May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc. Expected to work in high heat or extreme cold temperatures for extended periods of time. May operate in austere COUNS and OCOUNS locations. Ability to wear a full face or forced air respirator. Ability to work in confined spaces EQUAL OPPORTUNITY EMPLOYER/VEVRAA/ADA TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Employment Opportunity Employer and a VEVRAA governed Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities. TNC provides all employees and job applicants equal employment opportunities in hiring and promotion without regard to age, sex, sexual orientation, marital status, race, religion, color, veteran status, genetic information, physical or mental disability, national origin or any other reason prohibited by law. #jsfirm Job Posted by ApplicantPro

Yulista Contract Services LLCRegular PRIMARY FUNCTION The Aircraft Mechanic I inspects, repairs, replaces, and rebuilds components such as flight controls, plumbing and hydraulic units, aircraft structures, landing gear, anti-icing components, pneumatic and hydraulic systems, engines, drivetrain components, auxiliary power units, and ventilation and heating systems. The mechanic uses hand tools, power tools, machines, overhead hoists, and equipment such as external hydraulic power carts and nitrogen servicing carts. The mechanic reads and interprets manufacturer's maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning and/or damaged components. The mechanic performs scheduled, unscheduled, phase, periodic, and other special inspections. The Aircraft Mechanic may remove and install components such as engines, transmissions, gearboxes, fuel cells and systems, flight control actuators, control rods and cables, hydraulic components, and drivetrain components from an aircraft. They disassemble, clean, and inspect parts for wear, cracks, security, corrosion, foreign object damage, distortions, integrity, or other defects according to technical manuals. They repair or replace defective parts, and reassemble and/or install components in an aircraft. ESSENTIAL FUNCTIONS Job duties may require that the mechanic perform preflight and post-flight maintenance inspections and other miscellaneous duties to service aircraft. These may include flushing gearboxes, cleaning screens and filters, greasing moving parts, checking brakes, and jacking and towing of aircraft. They are responsible for entering any work and inspections performed into maintenance records and are responsible for verifying that their completed work meets applicable standards. The Aircraft Mechanic I may service engines and airframe components to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration. SUPERVISORY RESPONSIBILITIES: This position has no direct reports. KNOWLEDGE, SKILLS, & ABILITIES: QUALIFICATIONS: High School Diploma or equivalent Must have a minimum of 1 year of Aviation Maintenance Experience (an A&P License or a record of Formal aviation maintenance training will be accepted in lieu of experience) Working knowledge of technical publications Must be able to read, write and communicate using the English Language Able to deal with stressful situation while maintaining a professional attitude Must be able to obtain and maintain security clearances and access as required by the contract PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.

Yulista Support Services LLCRegularAre you ready to take the next step in your aircraft maintenance career? Yulista is looking for a Sheet Metal Mechanic I to join our night‑shift team in Elizabeth City, NC. In this role, you'll troubleshoot malfunctions, repair structural components, and support modifications that keep our aircraft mission‑ready. If you're motivated, detail‑oriented, and eager to grow your skills in a fast‑paced hangar environment, we want to talk with you. This is a great opportunity to build hands‑on experience while contributing to work that truly matters. Apply today and become part of a team that values craftsmanship, safety, and professional growth. PRIMARY FUNCTION The Sheet Metal Mechanic troubleshoots malfunctions, repairs, and modifies aircraft structures and structural components. This worker reads and interprets technical maintenance manuals, service bulletins, technical orders, blueprints, sketches, engineering data and other specifications to determine feasibility and method of repairing or replacing malfunctions or damaged components. This individual will repair, replace, and rebuild damage to aircraft structures or sheet metal systems, such as wings and fuselage and functional components including rigging and surface controls, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, rivet guns and drills. Prepare parts and items to locate defects; will prepare defective surfaces for successive operations by sanding, scraping, applying prepared solvents, and cleaning agents. Will be required to follow work orders, as assigned by the Program Manager. All work is subject to Government Quality Assurance (QA) review in process and upon completion for compliance with requirements, instructions, specifications, shop practices and procedures. Shall work independently and complete all repairs and modifications in a timely manner: with minimal rework or discrepancies noted. ESSENTIAL FUNCTIONS • Interface with Crew lead and other Technicians as required. • Install sheet metal & structures IAW instructions/drawings. • Install sheet metal & structures as required meeting customer needs. • Perform continuity and power checks. • Remove, inspect, repair, and reinstall aircraft parts/systems. • Annotate logbook and workbook entries IAW Coast Guard Manuals or other contractual guidance. • Maintain a high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. • Comply with processes and procedures as per DHS/Department of Defense (DOD) documents and publications. • Comply with safety rules and regulations while performing day to day maintenance. Promptly report all accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. • Other duties as assigned SUPERVISORY RESPONSIBILITIES This position does not have direct reports. KNOWLEDGE, SKILLS, & ABILITIES: • Ability to demonstrate work methods and techniques. • Ability to read, understand and apply trade or administrative guides such as technical manuals, technical orders, blueprints, sketches, and other related documents. • Ability to lift, reach, bend, walk, pull, sit, stand, crouch, stoop, kneel and stretch for prolonged periods of time. May be required to work in cramped, awkward, and strained positions or required to climb ladders, work platforms, scaffolding and aircraft structures. • Knowledge, skill, and ability to follow appropriate safety procedures common to the trade. • Knowledge of specific hazardous materials and hazardous wastes procedures is necessary, including the proper fitting and usage of protective gear and completion of related training. • Must be able to carry items up to 40 pounds or heavier with assistance from other workers or weightlifting devices. • May be required to wear cumbersome personal protective equipment (PPE) and clothing for Hazardous Material operations. • Specialized experience in aviation sheet metal repair and experience related to USCG aircraft specific models is highly desirable. • Familiarity with Airbus Helicopters Original Equipment Manufacturer (OEM) manuals or similar OEM manuals with the ability to research maintenance history, procedures and component limitations is desired. • Technical capability/experience with aircraft, airframes, components, and substructures. Should include maintenance of primary, secondary, and tertiary structures. • Technical capability to assist in planned depot maintenance of USCG aviation assets. • Technical capability to deal with aircraft upgrades and aging aircraft sustainment issues. Experience with new component integration and developing repair or replacement strategies for airframes, components and/or substructures. • Capability to work in regulated areas with toxic materials present including hexavalent chromium and cadmium. This will include use of PPE such as protective clothing, respirator, etc. QUALIFICATIONS: • High School diploma or equivalent • Experience with USCG MH65 aircraft is highly desirable. • Experience in aircraft sheet metal structures to include maintenance and repair with a minimum of five years practical experience. • Ability to conduct research using USCG data systems such as Technical Manual Application System (TMAPS) and Microsoft Office Suite, or similar type systems. A minimum of five (5) years of practical experience is desired. • Ability to pass a drug and background screening • Must be able to obtain and maintain a government security clearance PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.