Aircraft Technician jobs at AAR - 813 jobs

**Title:** Aircraft Inspector (A&P Licensed) **Job Number:** 17656 The aircraft inspector is responsible for performing assigned inspections on civil aviation articles in accordance with technical data provided by the manufacturers for continued airworthiness, service bulletins, service letters, airworthiness directives, government and industry standard practices ESSENTIAL DUTIES AND RESPONSIBILITIES Verifies work performed on aviation articles is performed in compliance with manufacturer manuals. Performs incoming, primary, hidden damage, in-process and final inspections. Review maintenance records, documentation, and logbooks to ensure all necessary repairs, inspections, Op-checks and documentation have been completed in accordance with the current approved technical data May be authorized to approve work performed for return to service. Perform task as assigned relating to the privileges granted under 14 CFR Part 65. Always observing company safety requirements while carrying out assigned tasks. All other duties as assigned. CORE COMPETENCIES Commitment to company values and ethics Dependability: personally responsible, completes work in a timely manner, and performs tasks accurately Motivation: must maintain a positive attitude and strong work energy Organization: very detail oriented and always comes prepared Communication: excellent interpersonal and oral and written communication skills Initiative: plans work and carries out tasks without detailed instructions, prepares for problems or opportunities in advance, undertakes additional responsibilities Strong judgment and decision making Analytical skills: must be able to gather information and use data to determine cause and effect for complex problem solving. Qualifications: QUALIFICATIONS FAA Certificated with Airframe and Powerplant rating. Experience involving inspection, inspection techniques, and inspection tools with responsibility for certifying airworthiness. Knowledge of FARs and Ability to apply and interpret Federal Aviation Regulations (FARs), Advisory Circulars, AC manuals, Policies, and procedures relating to aircraft maintenance and airworthiness. Three years experience in maintenance and repair of airframes, powerplants, and systems of aircraft with takeoff weight of more than 12,500 pounds Have been exercising their airmen privileges and actively engaged, for the last 2 years Meets physical requirements of the job including twisting, standing, sitting, bending, and climbing a latter and able to lift 50 pounds. Must read, write and understand the English language \#LI-VS1 We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Please note all applicants must be a current US resident. ESI is now hiring a Senior Aviation Maintenance Technician in the Stuart, FL area. ESI is seeking a Senior Aviation Maintenance Technician who is responsible for inspection, service, maintenance, troubleshooting and repair of most aircraft features. Candidate must meet certification and qualifications in accordance with FAA standards. Candidate must have the ability to work flexible hours and assume on-call status, to include nights and weekends, dependent upon operational needs. The Senior Aviation Maintenance Technician reports directly to the Chief Pilot. QUALIFICATIONS: Valid FAA Airman Airframe and Power Plant (A&P) License. Field experience conducting maintenance on rotary-wing aircraft. Knowledge of FAA inspection programs, regulations, and documentation requirements. Familiarity with FAA Forms and Airworthiness Directive log historical record-keeping systems. Experience with Airbus H-125 and/or Bell OH-58/206 series aircraft. Experience with SAFRAN Arriel 2D and/or Rolls-Royce 250 series type engines. Experience with avionics, and advanced mission equipment (hoist, cargo hook, etc.) Valid FAA Airman Inspection Authorization (IA) License. Ability to walk, stand, stoop, bend, push a cart, or lift during the entire shift Ability to lift up to 25 pounds, including small packages and supplies DUTIES AND RESPONSIBILITIES: Consistent attention and commitment to the agency's mission. Perform scheduled and unscheduled maintenance, inspections, and repairs on multiple certificated rotary-wing aircraft to the highest possible standards - to include compliance with FAA regulations, airworthiness directives, and manufacturer procedures. Maintain and update all required maintenance records, logbooks, and historical data for multiple certificated aircraft in an organized fashion, and in compliance with FAA regulations. Conduct troubleshooting and diagnostics on various aircraft systems and components. Conduct daily inspections of the duty aircraft to help ensure safety. Maintain records for all contracted maintenance provided by outside vendors for agency aircraft. Ensure compliance with all Federal Aviation Administration (FAA) regulations and safety standards. Establish and maintain an organized parts inventory for all in-stock and military surplus parts. Work with the on-duty pilot-in-command or Chief Pilot to complete all maintenance test flights and troubleshooting. Stay up to date on advancements in aircraft technology and participate in training programs as needed or required. Maintain cleanliness and organization of the aircraft, hangar, tools, maintenance consumables, and personal work areas. Assist the Chief Pilot with budgetary forecasting and requirements for all maintenance related items. Perform any other duties as directed by the Chief Pilot. For immediate consideration, please email your resume directly to our recruiter, Craig Martinov, at ******************, and include in the subject line: Senior Aviation Maintenance Technician, Stuart, FL. ESI COMPANY SUMMARY: ESI provides comprehensive human resource services for its partner organizations. This includes recruiting, staffing, screening, on boarding, payroll, and benefits administration. Founded in 2015, ESI has carefully crafted our company culture and reputation based on a deep understanding that staffing is first and foremost about people. We understand the right placement in the right job changes lives. ESI is committed to providing simplified employment solutions through our superior work ethic and industry experience. It is our mission to treat every person we encounter with wholehearted integrity and dedication.

Technician - Structures III - B 06+ Months Merritt Island, FL B Shift: Monday - Thursday 4:30 PM to 3:00 AM D Shift: Friday to Sunday 5:30 AM to 6:00 PM Prescreen Questions 1. Have you drilled a close tolerance hole ? If so what was the tolerance? 2. What is the decimal equivalent to a #30 drill bit? 3. What are you checking when inspecting a hole to be within tolerance? 4. What fasteners do you have experience in installing? 5. Have you used a Powerfeed drill or Quackenbush? 6. Do you have experience operating a scissor lift or boom lift? 7. Can you climb ladders? 8. Can you lift 50lbs. ? 9. Are you ok with heights? 10.Are you able to read/interpret engineering blue prints? If so how would you rank yourself from 1-10? Key Responsibilities: Configure new production work areas with the necessary tooling and equipment to ensure efficient workflow and minimize any potential delays during the transition to high-rate manufacturing. Operate precision calibrated tools (torque wrenches, micrometers, etc.) to maintain high safety and quality standards. Identify and implement continuous improvement projects for safety and efficiency, enhancing overall productivity. Drilling precision holes to tight tolerance. Installing structural fasteners. Maintain clean and organized work areas following 5S principles to promote safety and operational efficiency. Tasks involve preparing and testing payload systems and hardware by applying materials, conducting painting, sealing, composite layup, repairs, testing, and assisting with vehicle assembly and installation. Team Focus & Domain Expertise: The structures team at *** is essential in enhancing the efficiency and large aerospace structures through advanced drilling and assembly techniques. As a technician on this team, you will be involved in precise drilling and assembly using both manual and power feed drills and specialize large-scale structural assembly. Your expertise will include working with both metallic and composite materials, performing detailed processes like drilling, deburring, and assembling large components. Additionally, you will be responsible for surface preparation, fixturing components, and the alignment of structural parts, ensuring they meet stringent specifications. Your role will involve maintaining fabrication methods and specification requirements to maintain high-quality construction using various materials and techniques. Minimum Qualifications: 5+ years of experience in aerospace manufacturing, structures and other related field. Familiarity with one or more of the following: Basic use of hand tools & Drills Ability to interpret engineering drawings and specifications accurately. Experience with precision calibration tools including torque wrenches, micrometers, calipers, laser tracker, and optical measuring instruments. Ability to lift 50lbs and comfortable working at heights (work stands, ladders, lifts) and/or in confined spaces. Expertise in various applications, including adhesives, sealants, and thermal blankets. Proficiency in digital tools, including Windows and Microsoft Office applications. Preferred Qualifications: Industry certification, trade school training and/or degree in related field. Knowledge of precision assembly processes and handling large aerospace components. Strong technical and leadership skills with a keen attention to detail, essential for leading teams in complex integration tasks. Effective communication and collaboration skills in teams to foster a positive work environment. Continuous improvement mindset and curiosity for optimizing processes, driving innovation. Lean Manufacturing and/or Six Sigma certification. Willingness to work overtime. #TB_EN #ZR

The aircraft inspector is responsible for performing assigned inspections on civil aviation articles in accordance with technical data provided by the manufacturers for continued airworthiness, service bulletins, service letters, airworthiness directives, government and industry standard practices ESSENTIAL DUTIES AND RESPONSIBILITIES Verifies work performed on aviation articles is performed in compliance with manufacturer manuals. Performs incoming, primary, hidden damage, in-process and final inspections. Review maintenance records, documentation, and logbooks to ensure all necessary repairs, inspections, Op-checks and documentation have been completed in accordance with the current approved technical data May be authorized to approve work performed for return to service. Perform task as assigned relating to the privileges granted under 14 CFR Part 65. Always observing company safety requirements while carrying out assigned tasks. All other duties as assigned. CORE COMPETENCIES Commitment to company values and ethics Dependability: personally responsible, completes work in a timely manner, and performs tasks accurately Motivation: must maintain a positive attitude and strong work energy Organization: very detail oriented and always comes prepared Communication: excellent interpersonal and oral and written communication skills Initiative: plans work and carries out tasks without detailed instructions, prepares for problems or opportunities in advance, undertakes additional responsibilities Strong judgment and decision making Analytical skills: must be able to gather information and use data to determine cause and effect for complex problem solving. QUALIFICATIONS FAA Certificated with Airframe and Powerplant rating. Experience involving inspection, inspection techniques, and inspection tools with responsibility for certifying airworthiness. Knowledge of FARs and Ability to apply and interpret Federal Aviation Regulations (FARs), Advisory Circulars, AC manuals, Policies, and procedures relating to aircraft maintenance and airworthiness. Three years experience in maintenance and repair of airframes, powerplants, and systems of aircraft with takeoff weight of more than 12,500 pounds Have been exercising their airmen privileges and actively engaged, for the last 2 years Meets physical requirements of the job including twisting, standing, sitting, bending, and climbing a latter and able to lift 50 pounds. Must read, write and understand the English language #LI-VS1

Amazon Leo is Amazon's low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. The success of Amazon Leo depends on the quality, reliability, cost, integration, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution. Key job responsibilities - Primarily second-shift, but shift schedule may vary depending on production/processing/launch schedules - Successfully process Amazon Leo satellites through Propellant Loading preps, fill, and securing according to technical work instructions - Independently execute and prioritize work to meet production schedules - Rigging and critical lifts of bulky, sensitive flight hardware - Able to obtain and maintain licenses, operator permits, and/or certifications as required - Use precision calibrated tools - torque wrenches, multimeters, optical inspection devices, micrometers, and calipers - Read and interpret engineering drawings and technical documentation - Perform work according to procedures, specifications, and test instructions - Check and inspect your work after completion to ensure engineering and quality standards are met per the drawing and work instruction requirements - Collaborate with manufacturing engineers to develop and document activities, including continuous improvement opportunities - Perform other related duties, as assigned, for the purpose of ensuring an efficient, safe, and effective work environment - Must be willing and able to perform extended travel, either domestically or internationally as business needs demand. A day in the life Upon arrival to the PPF, the second-shift Prop Load Technician will meet with the SAT Zone engineer(s) and technician lead(s) for debrief on first shift's progress and challenges, take-over in-process activities (satellite propellant-loading and securing), and set-up satellites for first-shift the following day. The technician will be assigned tasks based on their skills, optimal process flow/timing, and processing/launch manifest needs. As a Level 3 (senior) technician, you will be expected to be able to independently perform work and train others on the Prop Load Team's tasks. Valuable skills and experience for this role include a variety of aerospace operational disciplines, including mechanical assembly, propellant loading (or similar spacecraft pneumatic/propulsion operations), pneumatic and electrical control system troubleshooting/rework, and rigging/crane/forklift operations In short, you will be responsible for some of the most critical tasks to process and integrate each Amazon Leo satellite for launch, ensuring high quality, workmanship, and safety standards are adhered to on a daily basis. About the team The Propellant Loading Team is part of the Satellite Processing Zone at Amazon Leo's Payload Processing Facilities. The SAT Zone is responsible for receiving each satellite from the factory in WA, testing, processing, and readying them for dispenser integration, stacking, and launch. The Prop Load team's mission is to safely, consistently, and efficiently load Krypton propellant on all 3,236 satellites that will be launched to populate the Amazon Leo constellation. The team is based at the Comet PPF in Kennedy Space Center, and travels to support propulsion operations at other PPFs as the launch manifest requires. Basic Qualifications - High School diploma or equivalent - Experience with precision torque, measurement and inspection devices (i.e., automated and manual torque wrenches, calipers, micrometers, profilometers, optical inspection devices, multi-meters, torque wrenches) - Can lift up to 49 pounds, stand/walk during shifts lasting up to 12 hours, and be able to frequently push, pull, squat, bend, and reach - Experience in the aerospace/launch industry, automotive industry, medical device industry, aviation, military, or other high-reliability operating environment - A demonstrated ability in reading/understanding technical drawings, work instructions, and standard operating procedures - Able to stand for long periods of time and perform repetitive assembly operations - Able to obtain and maintain a US Passport - Able and willing to comply with the Government of French Guiana which mandates that travelers receive vaccinations - Able to pass Kennedy Space Center background checks Preferred Qualifications - Experience completing complex tasks quickly with little to no guidance and react with appropriate urgency to situations that require a quick turnaround, or experience in a fast-paced, high-tech company - 2+ years in mechanical, propulsion, pneumatic, and/or electrical assembly and test with spacecraft/launch vehicle(s) - Senior technician experience in a fast-paced, high-precision aerospace processing environment - Experience with cleanroom environments, working with Foreign Object Debris (FOD) and Electrostatic Discharge (ESD) sensitive flight hardware - Experience with forklifts, cranes, rigging, and heavy equipment (previous certifications appreciated) Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $71,760/year in our lowest geographic market up to $80,080/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************* . This position will remain posted until filled. Applicants should apply via our internal or external career site.

Amazon Leo is Amazons low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and weve designed the system with the capacity, flexibility, and performance to serve Technician, 2nd Shift, Processing, Operations, Technical, Mechanical, Manufacturing

AVTECH Global is looking for an Aircraft Tech II in Savannah, GA. Shift: First (06:00 to 16:30); other shifts may be available Pay Rate: $32.19 per hour Job Type: Full-time, Contract Contract Duration: 12 months (w/opportunity for extension) Benefits: coverage of up to one-half of employee's medical insurance premium for a base plan eight (8) paid holidays per diem split (if qualified) three (3) sets of uniforms (if applicable) opportunity to become a direct hire after ninety (90) days Experience/Education: High School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required. Valid Driver's License required. Unique Skills: Should be able to work any shift assigned. Shift is not guaranteed. Purpose: Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. Essential Functions and Responsibilities: Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. Provide training to less experienced technicians. Protect customer property (PTP). Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Implement and apply Lean/continuous improvement processes to all areas of responsibility. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. Perform other duties as assigned. Other Requirements: Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language.

AVTECH Global is looking for an Aircraft Upholstery Tech Sr in Savannah, GA. Shift: First (05:30 to 16:00); other shifts may be available Pay Rate: $32.19 per hour Job Type: Full-time, Contract Contract Duration: 12 months (w/opportunity for extension) Benefits: coverage of up to one-half of employee's medical insurance premium for a base plan eight (8) paid holidays per diem split (if qualified) three (3) sets of uniforms (if applicable) opportunity to become a direct hire after ninety (90) days Experience/Education: High School Diploma/GED. Four (4) years of experience in upholstery to include two (2) years aircraft upholstery experience. Advanced knowledge of upholstery and sewing processes and products and/or advance carpet knowledge including being able to install custom carpets. Purpose: Work independently to design, fabricate, and install upholstery and trim items in aircraft interiors. Assist Shop Lead by overseeing projects and providing guidance and direction to co-workers. Mentor and train other Upholstery Technicians. Essential Functions and Responsibilities: Fabricate and install seat covers, curtains and various assemblies and subassemblies. Interpret material specifications and design/engineering drawings to ensure finished product meets design and engineering requirements. Sew, fabricate, and install covers for all styles of panels in the aircraft interior while meeting safety, quality, and productivity standards and goals. Use the material tracking system, Corridor, to create parts demand, track squawks and to sign-off work. Work with design/drawings to cut and install advanced custom design carpets with unique patterns. Accept Lead responsibilities when needed. Oversees projects and coordinates with Lead to delegate tasks to assigned technicians. Conduct safety audits and assists team members in doing safety audits. Assist in maintaining shop equipment and associated JSAs. Comply with and champion Safety, 5S, and housekeeping policies and ensure the protection of aircraft interiors (PTP). Mentor and train lesser skilled technicians and monitor their work to ensure they complete assigned tasks in accordance with required levels of safety, quality and productivity. Work with Lead and higher skilled technicians to develop and implement process improvements reduce material cost, cycle time, and labor hours using Lean Six-Sigma tools. Perform other duties as required. Other Requirements: Possess a working knowledge of inspection and process specifications and terminology. The ability to read, write, speak, and understand proficiently the English language. Ability to read and interpret blueprints and engineering documentation. Must be computer literate. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be able to read, write, speak, and understand the English language.

AVTECH Global is looking for an Aircraft Upholstery Tech Sr in Savannah, GA. Shift: First (05:30 to 16:00); other shifts may be available Pay Rate: $32.19 per hour Job Type: Full-time, Contract Contract Duration: 12 months (w/opportunity for extension) Benefits: coverage of up to one-half of employee's medical insurance premium for a base plan eight (8) paid holidays per diem split (if qualified) three (3) sets of uniforms (if applicable) opportunity to become a direct hire after ninety (90) days Experience/Education: High School Diploma/GED. Four (4) years of experience in upholstery to include two (2) years aircraft upholstery experience. Advanced knowledge of upholstery and sewing processes and products and/or advance carpet knowledge including being able to install custom carpets. Purpose: Work independently to design, fabricate, and install upholstery and trim items in aircraft interiors. Assist Shop Lead by overseeing projects and providing guidance and direction to co-workers. Mentor and train other Upholstery Technicians. Essential Functions and Responsibilities: Fabricate and install seat covers, curtains and various assemblies and subassemblies. Interpret material specifications and design/engineering drawings to ensure finished product meets design and engineering requirements. Sew, fabricate, and install covers for all styles of panels in the aircraft interior while meeting safety, quality, and productivity standards and goals. Use the material tracking system, Corridor, to create parts demand, track squawks and to sign-off work. Work with design/drawings to cut and install advanced custom design carpets with unique patterns. Accept Lead responsibilities when needed. Oversees projects and coordinates with Lead to delegate tasks to assigned technicians. Conduct safety audits and assists team members in doing safety audits. Assist in maintaining shop equipment and associated JSAs. Comply with and champion Safety, 5S, and housekeeping policies and ensure the protection of aircraft interiors (PTP). Mentor and train lesser skilled technicians and monitor their work to ensure they complete assigned tasks in accordance with required levels of safety, quality and productivity. Work with Lead and higher skilled technicians to develop and implement process improvements reduce material cost, cycle time, and labor hours using Lean Six-Sigma tools. Perform other duties as required. Other Requirements: Possess a working knowledge of inspection and process specifications and terminology. The ability to read, write, speak, and understand proficiently the English language. Ability to read and interpret blueprints and engineering documentation. Must be computer literate. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be able to read, write, speak, and understand the English language.

AVTECH Global is looking for an Upholstery Tech II in Savannah, GA. Shift: First (05:30 to 16:00); other shifts may be available Pay Rate: $25.66 per hour Job Type: Full-time, Contract Contract Duration: 12 months (w/opportunity for extension) Benefits: coverage of up to one-half of employee's medical insurance premium for a base plan eight (8) paid holidays per diem split (if qualified) three (3) sets of uniforms (if applicable) opportunity to become a direct hire after ninety (90) days Experience/Education: High School Diploma/GED. Two (2) years experience using commercial sewing machines, sergers and/or various hand tools used in upholstery and carpet trades. Experience in aerospace industry preferred. Purpose: Under minimal supervision fabricate and install upholstery, cover panels, and make simple patterns for aircraft interiors using design/engineering drawings and aircraft specifications. Essential Functions and Responsibilities: Fabricate, using design/engineering drawings and aircraft specifications, cover and install flat panels and curtains. May sew simple covers using design/engineering drawings and aircraft specifications. Work with fabric, vinyl and leather hides, composites and other materials using specified adhesives, sewing equipment, hardware, hand tools and various power tools. Cut and surge carpets, cover bulkheads and cover/install panels. May be responsible to fabricate various metal parts, fit panels and windows, cabin head liners, upper sidewalls, lower side panels, hatch panels, and windows. Use the material tracking system to create parts demand, track squawks and to sign-off work. Work with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Manufacturing and other process improvement techniques. Use the material tracking system, Corridor, to create parts demands, track squawks and to sign-off work. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting others as risk. Performs other duties as required. Other Requirements: Ability to read, write, speak, and understand proficiently the English language. Ability to read and interpret blueprints and engineering documentation. Ability to use measuring tools and perform basic math computations. Must be computer literate. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be able to read, write, speak, and understand the English language.

AVTECH Global is looking for an Upholstery Tech I in Savannah, GA. Shift: First (05:30 to 16:00); other shifts may be available Pay Rate: $23.32 per hour Job Type: Full-time, Contract Contract Duration: 12 months (w/opportunity for extension) Benefits: coverage of up to one-half of employee's medical insurance premium for a base plan eight (8) paid holidays per diem split (if qualified) three (3) sets of uniforms (if applicable) opportunity to become a direct hire after ninety (90) days Experience/Education: High School Diploma/GED. Entry level position. Experience using commercial sewing machines, sergers and/or various hand tools used in upholstery and carpet trades is preferred. Valid driver's license required. Purpose: Under moderate supervision fabricate and install upholstery, cover panels, and make simple patterns for aircraft interiors using design/engineering drawings and aircraft specifications. Essential Functions and Responsibilities: Perform technical upholstery functions within design, customer, FAA, and aircraft specifications. Specific installation and trim tasks are to be completed in compliance with work order instructions and specifications. Fit panels and windows, cabin head liners, upper sidewalls, lower side panels, hatch panels, windows, cut and surge carpets, cover bulkheads, fabricate various metal parts, and covering and installation of panels. Create carpet patterns per design drawings and complete installation. Use the material tracking system to create parts demand, track squawks and to sign-off work. Performs other duties as required. Other Requirements: Ability to read, write, speak, and understand proficiently the English language. Ability to read and interpret blueprints and engineering documentation. Ability to use measuring tools and perform basic math computations. Must be computer literate. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be able to read, write, speak, and understand the English language.

AVTECH Global is looking for an Upholstery Tech I in Savannah, GA. Shift: Weekend Days (05:00 to 17:30); other shifts may be available Pay Rate: $23.32 per hour Job Type: Full-time, Contract Contract Duration: 12 months (w/opportunity for extension) Benefits: coverage of up to one-half of employee's medical insurance premium for a base plan eight (8) paid holidays per diem split (if qualified) three (3) sets of uniforms (if applicable) opportunity to become a direct hire after ninety (90) days Experience/Education: High School Diploma/GED. Entry level position. Experience using commercial sewing machines, sergers and/or various hand tools used in upholstery and carpet trades is preferred. Purpose: Under moderate supervision fabricate and install upholstery, cover panels, and make simple patterns for aircraft interiors using design/engineering drawings and aircraft specifications. Essential Functions and Responsibilities: Perform technical upholstery functions within design, customer, FAA, and aircraft specifications. Specific installation and trim tasks are to be completed in compliance with work order instructions and specifications. Fit panels and windows, cabin head liners, upper sidewalls, lower side panels, hatch panels, windows, cut and surge carpets, cover bulkheads, fabricate various metal parts, and covering and installation of panels. Create carpet patterns per design drawings and complete installation. Use the material tracking system to create parts demand, track squawks and to sign-off work. Performs other duties as required. Other Requirements: Ability to read, write, speak, and understand proficiently the English language. Ability to read and interpret blueprints and engineering documentation. Ability to use measuring tools and perform basic math computations. Must be computer literate. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be able to read, write, speak, and understand the English language.

AVTECH Global is looking for an Upholstery Tech I in Savannah, GA. Shift: First (05:30 to 16:00); other shifts may be available Pay Rate: $23.32 per hour Job Type: Full-time, Contract Contract Duration: 12 months (w/opportunity for extension) Benefits: coverage of up to one-half of employee's medical insurance premium for a base plan eight (8) paid holidays per diem split (if qualified) three (3) sets of uniforms (if applicable) opportunity to become a direct hire after ninety (90) days Experience/Education: High School Diploma/GED. Entry level position. Experience using commercial sewing machines, sergers and/or various hand tools used in upholstery and carpet trades is preferred. Purpose: Under moderate supervision fabricate and install upholstery, cover panels, and make simple patterns for aircraft interiors using design/engineering drawings and aircraft specifications. Essential Functions and Responsibilities: Perform technical upholstery functions within design, customer, FAA, and aircraft specifications. Specific installation and trim tasks are to be completed in compliance with work order instructions and specifications. Fit panels and windows, cabin head liners, upper sidewalls, lower side panels, hatch panels, windows, cut and surge carpets, cover bulkheads, fabricate various metal parts, and covering and installation of panels. Create carpet patterns per design drawings and complete installation. Use the material tracking system to create parts demand, track squawks and to sign-off work. Performs other duties as required. Other Requirements: Ability to read, write, speak, and understand proficiently the English language. Ability to read and interpret blueprints and engineering documentation. Ability to use measuring tools and perform basic math computations. Must be computer literate. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be able to read, write, speak, and understand the English language.

Company: Boeing Aerospace Operations Our Maintenance, Repair, and Overhaul (MRO) Jacksonville and Component Operations facility is seeking General Mechanics that are motivated to support a greater cause in directly impacting military warfighter readiness by providing critical maintenance repairs and modifications for our military customers. We are proud knowing the products we return to service will strengthen global security. As a Boeing employee, you will have access to an industry leading benefits packages, employee incentive programs and educational assistance. You will also have access to many resources to inform and support your development throughout your career with us. While we work in an agile and dynamic MRO environment, your wellbeing is important to us and we strive to find a healthy work / life balance, as well as, an ethical team culture with a strong emphasis on openness, collaboration, innovation, safety, and first-time quality. The professionals chosen to fill these positions will join our MRO and Component Operations organization, working as part of a team in support of our key programs such as military commercial derivatives, fighter aircraft and aircraft component maintenance, repair, and overhaul. The candidates chosen will be responsible for adherence to established processes, accurate and timely work recording and contractual/regulatory compliance. To ensure we continue to support our customers, we are looking for skilled aircraft maintenance professionals to join our team. Successful applicants will be based in Jacksonville, Florida. Position Responsibilities: Perform efforts associated with sealing, painting, shimming, and preserving structure and systems in accordance with standard repair processes. Perform component installations, ceiling, sidewall panels, flight controls and other hydraulic components. Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair. Use of tooling assemblies and fixtures for depot level modification and repair of structural parts. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests. Maintain necessary certifications, licenses and permits as required for assigned work. The candidate must be able to ascend and descend vertical work ladders, and work in confined spaces. Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime. General Responsibilities: Strive for an efficient work effort in all assigned tasks Strive for First Time Quality on all assigned work Follow the guidance and direction from lead, and senior Subject Matter Experts (SME) Execute all duties while wearing required safety equipment Complete required company and specific statement of work training requirements Maintain necessary certifications, licenses and permits as required for assigned work. Demonstrate a safe work ethic Perform detailed tool inventories daily Communicate using basic computer systems including but not limited to Microsoft Office as needed to complete essential job requirements Contribute positively to our open and honest reporting culture Report all incidents and occurrences in the Boeing Safety Management System. Ensure compliance with regulatory requirements, company processes and procedures Maintain a high standard of organization and cleanliness within assigned work areas, “Clean as You Go” Contribute to continuous improvement initiatives Be flexible to ensure aircraft are delivered on time to customer Perform other duties as directed by management for the benefit of the company, program or employee(s) Can perform the above tasks with little or general supervision GFD5IB (Associate Level; Can perform the above tasks with little or general supervision) GFD5IC (Experienced Level; Can perform the above tasks with no supervision and can assist others) Basic Qualifications (Required Skills/Experience): 3+ years of experience with F/A-18 maintenance and/or modification 3+ years of experience working as an aircraft mechanic 3+ years of experience or reading and understanding engineering drawings, blueprints, schematics, and specifications Willing and able to work any shift (Must be able & willing to work various shifts and / or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays; mission requirements and / or workload may require both scheduled and unscheduled overtime) Preferred Qualifications (Desired Skills/Experience): Knowledge of general aircraft maintenance and environment processes (Human Factors, FOD control, tool control, health & safety & COSHH) Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for 1st and/or 2nd shift; candidates must be able to work either shift. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: Associate (GFD5IB) - $57,800 - $78,200 Experienced (GFD5IC) - $68,000 - $92,000 Language Requirements: Not Applicable Education: Not Applicable Relocation: Relocation assistance is not a negotiable benefit for this position. Export Control Requirement: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 4 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

Company: The Boeing Company Boeing Commercial Airplanes (BCA) is seeking Aircraft Assembly Mechanics (Level B or C) to support the 787-production system as an electrical, system, or seal/wing mechanic in North Charleston, South Carolina on a variable shift. This role offers an exciting opportunity within a dynamic manufacturing assembly environment. Team members will leverage their prior experience, along with the knowledge gained through foundational training and certifications, to complete daily assigned tasks safely and with quality. Individuals will be responsible for identifying parts and tooling within their work locations on advanced airplanes by interpreting technical drawings to accurately complete detailed work instructions. Attention to detail and strict compliance with procedures are critical to correctly identify all necessary hand tools, parts, and equipment required to ensure defect-free work. This position is physically demanding, and employment is contingent upon successful completion of foundational training requirements. This is not just a job-it's an opportunity to build a career while contributing to the future of aviation as part of an innovative team! Primary Responsibilities: Safety: Adhering strictly to all safety protocols and guidelines to protect ourselves, our colleagues, and our workplace. Safety is non-negotiable and must be integrated into every task we perform. Quality: Maintaining rigorous quality standards in all deliverables, ensuring that our work meets or exceeds expectations and complies with all regulatory and company requirements. Must successfully complete the new hire foundational training to obtain and maintain all required certifications. Proficient use of a computer in a dynamic production environment. Look up/read/comprehend electronic technical work instructions, drawings and/or specifications. Wear appropriate protective clothing/equipment determined by the task performed. Operate various mechanical lifts (e.g. ladders, tiger and snorkel lifts). Use various hand tools and diagnostic equipment such as screwdrivers, ratchets, power screwdriver multi meters, continuity testers. Apply chemical solvents, sealants, coatings, primers, adhesives, paints and special finishes. Inspect your work quality and check for Foreign Object Debris. Work around energized sources (electrical equipment and hazards/shock, e.g. circuit breakers and wiring) and exposure to constant noise. Finger manipulation (keyboarding, other). Lifting and carrying up to 10-35 pounds. Climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), crawling, crouching (squatting). Flexion/Extension (head bent down, head bent back), handling, kneeling, bending at the waist, reaching (overhead), rotation of head/neck, standing, twisting at the waist and walking. Install various aircraft system components and wiring such as: tubing, valves, regulators, actuators, compressors, ducts, and interior components. Route wire harnesses to supports, install connectors to receptacles and electronic components. Fiber optic clean and inspection, light loss testing, routing and installation. Work in confined space and respirator usage. This position is expected to be 100% onsite. The selected candidate will be required to work onsite. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete an assessment as part of the selection process. You will receive an email invitation at the address you provided in your application. From the date of the invitation, you will have 5 days to complete the assessment. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/ Experience): Ability to work a variable shift as noted further below. Ability to meet physical demands of the role such as flexion and extension (head bent down, head bent back), handling, kneeling, bending at the waist, reaching overhead, rotation of head/neck, standing, twisting at the waist and walking, climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), crawling, crouching (squatting). Ability to lift/carry up to 10-35 pounds. Ability to work with high-hazard chemicals. Ability to complete and maintain Confined Space and Fall Protection certifications, as required. 1+ years of experience using software applications such as internet navigation, email, Microsoft Office Suite, and/or other specialized computer applications. 1+ years of experience following detailed work instructions, reading and interpreting blueprints, drawings, or specifications, in English. 1+ years of experience applying mathematical calculations. 1+ years of experience in a technical, or mechanical field performing work with basic hand, power, and/or pneumatic (air) tools. Preferred Qualifications (Desired Skills/Experience): 3+ years of related work experience or an equivalent combination of education and experience. 3+ years of experience installing various aircraft system components such as tubing, valves, regulators, actuators, compressors, ducts, and interior components. 3+ years of experience in Automotive/Diesel/Heavy equipment mechanical experience. 3+ years of experience wire routing, dressing, hook-up/mating connections. 3+ years of experience applying sealant to required surfaces per specifications. Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for a variable shift (shift 4). Variable shift means you will be placed on a shift at the time of hire based on business needs at that time. You will remain on that shift until re-evaluation is needed. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $54,000 - $64,000 Summary pay range: $61,200 - $64,500 When Applying: Please review every aspect of your application carefully prior to submitting to ensure accuracy. If you have formal education or military experience in the field you are applying for please include that time in your total years of experience. Prior to uploading your resume, please ensure it is in one of the following formats: DOC, DOCX, PDF, or TXT. Use your most accurate contact information on your application to include your full address. Language Requirements: Not Applicable Education: Not Applicable Relocation: This position offers relocation based on candidate eligibility. Export Control Requirement: Safety Sensitive: Security Clearance: This position does not require a Security Clearance. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 4 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

This job is with Encode, Inc a fully owned subsidiary of Lancesoft •Perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring •Ability and understanding of routing instructions and handling of harnesses. •Perform sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes •Read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modifications and repairs •Use tooling assemblies and fixtures for depot level modification and repair of electrical wiring •Perform assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft •Troubleshoot organizational and depot maintenance level malfunctions in aircraft electrical and comms/nav-systems •Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc... •Use all equipment in accordance with established safety and operating procedures. •Perform all tasks involved in the coordination, preparation, and movement of material and tools •Operate riding type electric powered elevating equipment to accomplish work assignments •Maintain necessary certifications, licenses and permits as required for assigned work. •Perform all duties of lower Electrical classifications as required to successfully accomplish assignments Ability to perform the following requirements: •The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds. •Exposure to noise, working on elevated platforms •Use personal protective gear for face, eyes, ears, hand, and arms as required. •Pass visual acuity and color perception tests •Read, write, and comprehend the English language •Handle, use, and dispose of hazardous material •Obtain & maintain training certifications as required to support assignment responsibilities •Occasional (1 to 3 hrs) finger manipulation •On occasion, a 2-person lift may be necessary for weights greater than 50 lbs •Frequent reaching overhead (3 to 6 hrs) •Frequent walking on flat surfaces •Frequent standing flat or uneven surfaces •Frequent balancing on a ladder, steps, or uneven surfaces •Occasional climbing on 3-12 ft ladders or stands •Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls for an extended period of time •Occasional contact with metals •Frequent exposure to noise Basic Qualifications (Required Skills/Experience): •10+ years of experience with electrical/electronic theories and avionics systems, shop mathematics and practices •10+ years of experience in working with schematics, specifications, assembly drawings and standard operating procedures. •10+ years of experience with component and wire installation to include repairing, modifying, testing and troubleshooting new, experimental, and disturbed systems •Experience with fabricating new wire bundles •Experience with routing and installing wire bundles on airplanes without existing wiring (commercial routing experience preferred) •Ability to work variable shifts including weekends and overtime Preferred Qualifications (Desired Skills/Experience): •Experience with Avionics •Experience with Depot Level/Modification maintenance. •Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment •FAA certification in Airframe and/or Power Plant

Performs on and off aircraft electrical modification to electrical wiring and system components Perform complex connector terminations including shielded wires, coaxial cables and fiber optic wiring. Understand wire handling and routing instructions. Perform sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes. Demonstrate technical ability to read and interpret engineering drawings, technical orders, process specifications, and retrofit requirements to perform electrical modification/repair. Adhere to government and company procedural guidance, perform assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft work. Troubleshoot malfunctions in aircraft electrical and environmental systems of moderate difficulty at the organizational or depot maintenance level. Performs aircraft bench and/or flight line operational testing and troubleshooting in accordance with DOD, manufacturer, company, supplier and other directives. Performs assembly, installation, check-out physical characteristics, operational testing and modification of wire bundles in the testing, development and modification of aircraft in accordance with DOD, manufacturer, company, supplier and other directives. Responsible for the proper performance of assignments and the prudent handling of product, tools and equipment. Required to consult with management and peers to assess best work process. Will assist and train less senior employees. May be required to lead teams through more complex aircraft relevant tasks. Able to prioritize workload to maintain schedules on assigned projects. Perform all duties of lower Electrics classifications as required to successfully accomplish assignments. Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc. To accomplish assigned work. Ensure that all equipment is used in accordance with established safety and operating procedures. Diagnose and correct malfunctions occurring in assembly processes. Use any and all precision measuring instruments, gauges, tools, etc., necessary to check dimensions and conformance to quality requirements. Maintain necessary certifications, licenses and permits as required for assigned work. Able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds. Able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime Must be familiar with Hazardous Energy and Lock Out /Tag systems applications to ensure working environment is deemed safe for access and on the job performance. Will be required to assist other team members (General Mechanics, Structures, Avionics) in order to ensure cost/schedule targets are met. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at San Antonio. Candidate maybe be required to travel up to 25%. This position requires the ability to pass assessment during the training cycle. This position requires adherence to the SA Tool and FOD procedures. Ability to perform the following physical requirements: The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds. Exposure to noise, working on elevated platforms Use personal protective gear for face, eyes, ears, hand, and arms as required. Pass visual acuity and color perception tests Experience understanding and interpreting detailed written and verbal work instructions and processes Handle, use, and dispose of hazardous material Obtain & maintain training certifications as required to support assignment responsibilities Occasional (1 to 3 hrs) finger manipulation On occasion, a 2-person lift may be necessary for weights greater than 50 lbs Frequent reaching overhead (3 to 6 hrs) Frequent walking on flat surfaces Frequent standing flat or uneven surfaces Frequent balancing on a ladder, steps, or uneven surfaces Occasional climbing on 3-12 ft ladders or stands Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls for an extended period of time Occasional contact with metals Frequent exposure to noise BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE): Position requires 4+ years of experience in those duties as previously described for satisfactory performance. Position requires 4+ years of experience/knowledgeable in electrical/electronic theories and systems sufficient to perform assigned duties. Experience with fabricating new wire bundles Experience with routing and installing wire bundles on airplanes without existing wiring (commercial routing experience preferred) Ability to work rotating shift (1st, 2nd or 3rd) PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE): Experience with Depot Level/Modification maintenance. Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.

D2 Government Solutions (D2GS) is seeking an experienced Aircraft Mechanic III to join our F-22 Wash and Corrosion Control team at Joint Base Langley-Eustis. The selected candidate will perform complex maintenance, inspection, and corrosion control tasks on F-22 Raptor aircraft, ensuring full compliance with Air Force Technical Orders and D2GS quality standards. Responsibilities: Perform scheduled and unscheduled wash and corrosion control services on F-22 aircraft. Conduct inspections and perform advanced maintenance on structural, hydraulic, pneumatic, and landing gear systems. Lubricate and service aircraft landing gear, replace Zerk fittings, and perform canopy waxing per Technical Orders. Operate tow tractors and direct aircraft towing operations in compliance with safety and TO requirements. Document all work in AFTO 781 forms and maintenance systems; immediately report discrepancies to the Production Superintendent. Provide technical oversight and guidance to Aircraft Mechanic Helpers. Adhere to strict Foreign Object Damage (FOD) and Dropped Object Prevention (DOP) procedures. Maintain compliance with OSHA, AFOSH, environmental regulations, and JBLE safety standards. Qualifications: High school diploma or equivalent required; technical school or A&P certification preferred. Minimum of 5 years of aircraft maintenance experience, preferably on fighter-class aircraft. Strong understanding of corrosion control, lubrication systems, and aircraft ground handling procedures. Must be able to pass a federal background check Ability to read, interpret, and apply Technical Orders Ability to work outdoors in various weather conditions and lift up to 50 lbs. About D2 Government Solutions D2GS is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Visit us on the web at ************* to learn more.

D2 Government Solutions (D2GS) is seeking motivated Aircraft Mechanic Helpers to assist in the execution of F-22 Wash and Corrosion Control services at Joint Base Langley-Eustis. This entry-level role provides essential support to senior mechanics and is a great opportunity to gain hands-on experience in a highly specialized aircraft maintenance environment. Responsibilities: Assist Aircraft Mechanic III personnel during F-22 wash, lubrication, and corrosion control operations. Prepare aircraft for servicing by installing protective covers, taping seams, and masking sensitive areas. Perform routine cleaning and washing tasks using TO-approved cleaning compounds. Provide ground support during towing operations, including serving as wing/tail walkers. Handle tools, materials, and equipment in support of senior mechanics. Maintain clean and organized work areas while following FOD/DOP requirements. Document assistance tasks and ensure compliance with safety and quality control requirements. Qualifications: High school diploma or equivalent. Minimum of 1 year of general mechanical, maintenance, or related work preferred. Ability to follow detailed instructions and work as part of a team. Must be able to pass a federal background check Willingness to work outdoors in varying conditions and lift up to 50 lbs. Desire to grow within the aircraft maintenance career field. About D2 Government Solutions D2GS is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Visit us on the web at ************* to learn more.