Test Technician jobs at ABM Industries

Job Title: Electrical Field Test Technician (NETA III/IV or NICET Equivalent) Employment Type: Full-Time, Direct Hire Travel: Approximately 25% (Regional & National Projects) Elevate Your Career with ABM Electrical Power Services ABM Industries is looking for a skilled and experienced Electrical Field Test Technician to join our Electrical Power Services team. If you're a NETA Level III or IV Technician or hold NICET certification (or equivalent experience), this is your opportunity to work with a leading NETA-accredited organization that values expertise, leadership, and career advancement. As an Electrical Field Test Technician, you'll take charge of testing, troubleshooting, and commissioning power systems from low to high voltage. You'll also guide and mentor junior team members while working on complex, mission-critical projects in the field. What You'll Do Travel to client sites to inspect, test, troubleshoot, and start-up electrical systems Lead and mentor Level I and II Trainees and Assistants in technical tasks and field operations Assign work, review performance, and ensure consistent execution of testing procedures Conduct acceptance and maintenance testing for switchgear, relays, transformers, cables, and motor control centers Test and calibrate solid-state and electromechanical relays (including SEL 700G or comparable) Operate tools and software such as Enoserv RTS, Megger, and Omicron testing equipment Analyze test data, perform insulated fluid sampling, and interpret electrical performance issues Complete Job Hazard Analyses, including arc flash and shock hazard assessments Document all results in detailed field service reports Rotate on-call duties for emergency response and service Assist the sales team by providing technical expertise and recommendations Ensure compliance with NETA, NFPA70E, and ABM safety and quality standards What We're Looking For Minimum Requirements: 5+ years of experience in electrical testing and power system services Current NETA Level III or IV, or NICET equivalent certification Proven experience leading and mentoring technicians in the field Ability to manage multi-month, medium to large-scale projects Familiarity with NETA ATS/MTS Standards and NFPA70E Proficient in lockout/tagout and hazardous energy control procedures Excellent communication, leadership, and problem-solving skills Clean driving record and ability to travel nationally (up to 90%) Preferred Qualifications: Associate's degree or higher in Power Systems or related field Skilled in troubleshooting electrical faults, especially ground faults Familiarity with generator controls, protection systems, and high-voltage substations Why ABM? Competitive Compensation: Top-tier hourly pay plus overtime Career Progression: Work with the best and grow with continued support and training Comprehensive Benefits: Medical, dental, vision, 401(k), PTO, and more Team Environment: Join a collaborative crew of professionals who take pride in powering critical infrastructure Join a company that powers success-on every level. Apply now to bring your expertise to ABM Electrical Power Services. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM Team Member Benefits | Front Line Team Members | (Programa de Beneficios de ABM) #200 #LI-BR1

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Schuyler, NE Job Type: Full Time Shift(s) Available: 2nd Compensation: $38.00/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Daily Engagement of workforce through direction of work assignments, compensation, communication, recognition, development and coaching, etc... Manage the workflow process associated with electronics and some electromechanical areas of the facility, including the ASRS system Develop preventative maintenance procedures to maintain equipment associated with electronics and limited electromechanical equipment throughout the facility; including the management of parts inventory and corrective actions Manage safety culture through training and observations Liaison to contractors and Utilities department for projects and work orders Develop and update PLC and HMI programs as required based on established guidelines and controls for this type of equipment Ensure compliance of our measuring devices (i.e. Packers and Stockyards and Nebraska Department of Weights and Measures) Responsible for department budget, including labor and operating expenses Required Qualifications Legal to work in the US without the need of a Visa sponsorship Must be 18 years or older 2 year degree or better in electrical or electromechanical technologies or 3 years of experience with industrial process controls and industrial networking Competency in basic electrical 24 and 120 volt AC and DC circuits Basic knowledge of Windows XP/7 operating systems Ability to read, write and speak English Preferred Qualifications Experience in food processing environment Proficient in Allen-Bradley PLC Programming and troubleshooting, RsLogix 500/Control Logix 5000, Factory Talk View Install and trouble shoot Industrial Networks- Ethernet base and components Ability to read and interpret schematics, general machine installation and repairs Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Posting End Date: Accepting applications until job is filled and/or up to 60 days from the posting date Job Location: Fort Morgan, CO Job Type: Full Time Shift(s) Available: 3rd Compensation: $28.75/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Daily Engagement of workforce through direction of work assignments, compensation, communication, recognition, development and coaching, etc… Manage the workflow process associated with electronics and some electromechanical areas of the facility, including the ASRS system Develop preventative maintenance procedures to maintain equipment associated with electronics and limited electromechanical equipment throughout the facility; including the management of parts inventory and corrective actions Manage safety culture through training and observations Liaison to contractors and Utilities department for projects and work orders Develop and update PLC and HMI programs as required based on established guidelines and controls for this type of equipment Required Qualifications Eligible to work in the U.S. without visa sponsorship 18 years or older High school diploma or GED Able to read, write, and speak English Basic computer skills (Windows 7/10, Microsoft Office) Familiarity with Allen-Bradley PLCs (basic programming & troubleshooting) Comfortable learning new software and systems (PLC/HMI) Willing to work 6 days a week Preferred Qualifications Experience in a food processing environment Proficient in Allen-Bradley PLC programming (RSLogix 500/ControlLogix 5000, FactoryTalk View) Skilled in installing and troubleshooting Ethernet-based industrial networks Able to read schematics and perform machine installation/repairs Knowledge of basic electrical circuits (24V & 120V AC/DC) 2-year degree in electrical/electromechanical tech or 3+ years in industrial controls/networking Bilingual in English/Spanish or English/Somali Please note that this position does not include relocation reimbursement Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - Automation Employment Status: Salary Full-Time Function: Research & Development Pay Range: ($52,300.00 - $81,100.00) Target Bonus: % Req ID: 27802 Primary Function Work as part of Laser Group on the development of laser processing and parameter development in support of LECO products and systems. Work with lasers, optics, motion systems, welding torches, and/or power supplies to conduct process and parameter development. Work with Lincoln Electric Sales Team to develop and deliver laser solutions. Job Duties Perform, instruct and supervise testing of internal R&D efforts. Interact with suppliers, customers, distributors, and sales engineers on a regular basis. Perform other duties assigned by the supervisor. Usually works with minimum supervision, conferring with superior on unusual matters. Demonstrate laser processes for internal and external visitors to Laser Laboratory (EP-5). Travel to assist with installations/runoff at customer facilities. Assignments are broad in nature, requiring originality and ingenuity. Requirements Minimum High School Diploma/GED; Associates or Bachelor's in Engineering, Project Engineering or Engineering Technology preferred 3-5 years laser welding experience. Experience with laser processing and/or robotics is desirable Robotic programming experience is desirable Excellent written and verbal communication skills. Ability to read and interpret weld symbols Skill in the use of computers, specifically a PC, Windows-based operating environment Ability to work independently and as part of a team. Willingness to work in a lab environment and perform welds without assistance Ability to handle a constantly changing set of priorities. Willingness to travel 20% of the time. Possesses and applies a broad knowledge of principles, practices and procedures of particular field of specialization to the completion of difficult assignments. Physical Demands and Work Environment: The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, the employee is typically required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; talk and hear. Be able to climb ladders; lift hand tools approx. 1-15 lbs. in weight to complete machine assembly, parts up to 50 lbs. Repetition with activity. Work environment: The noise level in the work environment is usually low to moderate. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: ($52,300.00 - $81,100.00) Target Bonus: % Req ID: 27438 Summary Lincoln Electric is growing the Plant Engineering team and has outstanding opportunities for an experienced Electrical Engineering Technologist. Our Plant Engineering team is responsible for implementing capital projects and providing engineering support for the Consumable and Machine divisions of Cleveland Operations. Electrical Engineering Technologists play a crucial role in designing the electrical systems for equipment used in manufacturing welding machines and consumables, ensuring that the production floor equipment adheres to corporate objectives related to safety, health, productivity, quality, and continuous improvement. In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits. What You Will Do As an Electrical Engineering Technologist, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Modify solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Maintain, modify and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and support National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education & Experience Requirements Level II: Minimum of a Bachelor's degree required in Electrical Engineering Technology and 3+ years' experience Level Ill: Minimum of a Bachelor's degree required in Electrical Engineering Technology and 5+ years' experience Level IV: Minimum of a Bachelor's degree required in Electrical Engineering Technology and 8+ years' experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMls, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27938 Purpose A skilled, proactive, detail-oriented technologist who supports efforts to improve production equipment reliability and operational performance. Works with Maintenance and Plant Engineers to implement maintenance strategies, gather data, and apply methods to help reduce downtime and maintain efficiency. Contributes to reliability initiatives by developing procedures and providing technical support, ensuring consistent execution of engineering-driven plans. Job Description Support maintenance on complex repair issues. Provide documentation and suggest training to enhance workforce capabilities. Investigate alternatives to high-cost wear items and repair parts, including substitutions, new materials, and methods. Support root cause analysis of recurring equipment failures and assist in the implementation of corrective actions. Implement and support predictive technologies to reduce unplanned downtime, including procedures and documentation. Optimize and recommend preventative maintenance programs, ensuring correct tasks and frequencies are documented and followed. Assist engineering with equipment modifications, new designs, and capital project justifications. Champion and educate benefits of predictive maintenance across multiple technical and operational departments. Basic Requirements Bachelors of Science in Engineering Technology Degree in related field w/ 5+ years related experience. 5-10 years of experience with manufacturing equipment, with a focus on maintenance and reliability. Experience in industrial environments. Experience with predictive maintenance technologies and computerized maintenance management systems (CMMS). Proficiency in reliability tools and methodologies. Strong data analysis skills using tools like Excel, Power BI, or statistical software. Ability to interpret failure data and develop actionable insights. Skilled in conducting root cause analysis and implementing corrective actions. Ability to manage multiple projects and priorities effectively. Experience in planning and executing reliability improvement initiatives. Strong organizational skills and attention to detail. Excellent written and verbal communication skills. Ability to work cross-functionally with maintenance, production, and engineering teams. Capable of communicating technical findings and recommendations to cross-functional teams, including Maintenance, Production, Manufacturing, and Engineering. Excellent written and verbal communication skills. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: $22.51-$32.00 Target Bonus: 5.0% Req ID: 26304 Job Responsibilities Field service and commissioning support of industrial machinery. Assisting customer and local trades in troubleshooting equipment issues. Debug and servicing of electrical components. Perform end user training on equipment operation. Programming and Troubleshooting PLC based equipment. Programming and Troubleshooting HMI (Human Machine Interface) equipment. Writing new PLC and HMI applications per customer requirements. Job Requirements Electrical Engineering Degree preferred. Mechatronics Degree programs considered. Knowledge or education in computer programming architectures such as VB, C / C++, or C#. Knowledge or education in electrical circuits, schematic reading, design, and troubleshooting. Mathematical skills in geometry and trigonometry. Strong Mechanical aptitude. Excellent analytical and communication skills. Microsoft Windows ™ Operating system and PC experience. Microsoft Office application experience such as Word and Excel. Travel required - approximately 70% Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family! Electromechanical Technician ***$5000 Hiring Bonus*** Charter Wire is a leading Tier 1 supplier and manufacturer of Engineered Shaped Wire, Cold Finished Bar, and Cold-Headed and Stamped Components to various industries, including Automotive, Agriculture, Construction, Consumer, Industrial, and Oil & Gas. Charter Wire is a member of the Charter Manufacturing family of companies. Why Work Here: SCHEDULE: Get a dependable 8-hour first shift, Monday-Friday, with occasional overtime. BENEFITS: Access great benefits like medical, dental, vision, 401(k) match, and paid time off. GROWTH: Expand your skills with on-the-job training, process improvement opportunities, and internal advancement-we promote from within. SAFETY: Work in an environment committed to safety and continuous improvement. STABILITY: Join an established Midwest company with four generations of family ownership. Position specifics: Location: Charter Wire - 7850 N. 81st Street, Milwaukee, WI 53222 Shift: 10:00 PM - 6:00 AM, Monday-Friday What You'll Do: As an Electromechanical Technician, you'll play a critical role in maintaining, troubleshooting, and repairing production machinery. You'll work with both mechanical and electrical systems across high-speed stamping presses, cold forming machines, and automated equipment in a dynamic production environment. Maintain and troubleshoot electromechanical equipment using hand tools, welding equipment, and measuring devices Perform preventive maintenance to reduce downtime and ensure equipment reliability Diagnose and resolve issues using technical documents such as blueprints, schematics, and manuals Collaborate with cross-functional teams to support continuous improvement Follow safety protocols and use appropriate PPE Support process improvements and participate in ongoing training What You'll Need: Technical degree in a related field, journeyman's card, or 5+ years of industrial maintenance experience Proficiency in reading complex electrical schematics and code books Broad knowledge of electrical codes, electronic controls, and electrical theory Experience with line setups, inspections, and electrical testing equipment Strong math skills (fractions, percentages) Nice to Haves: Experience with PLCs and drives (Allen Bradley, Siemens) Familiarity with AC/DC motors, HVAC, and hydraulic/pneumatic systems Experience with welding/torch equipment and precision measuring tools Excellent communication and teamwork skills Problem-solving mindset and eagerness to keep learning Physical Requirements: Frequent standing and walking Occasional sitting, reaching, forceful motion, and lifting up to 60 lbs Minimal climbing and lifting over 100 lbs Ability to meet physical demands with or without reasonable accommodation Ready to put your mechanical and electrical expertise to work? Apply today and grow your career with Charter Wire. We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO).

Responsible for overseeing broiler farms as a representative of Koch Foods to contracted growers. Monitor house conditions, bird welfare, provide technical assistance and recommend condition improvements, grower performance, and cost reductions. Act as a liaison between Company and contract growers providing technical advice to growers regarding Company expectations. Monitor assigned flocks for bird comfort, equipment settings, etc., ensuring grower compliance with Company policies and procedures, and Federal and State regulatory laws and guidelines. Track, analyze and record bird mortality rates. Maintain feed tank inventories, ordering feed and coordinating deliveries. Ensure maximization of grower performance, and adherence to animal welfare laws and regulations. Share performance numbers with growers and review performance deficiencies. Other relevant duties as assigned. Bachelor Degree in Agricultural, Poultry or Animal Science, or other closely related field. Current and valid Driver's License, with a clean Motor Vehicle Record required. Must have knowledge of and experience with live poultry broilers and overall bird health. Strong leadership, communication and interpersonal skills. Knowledge of regulatory requirements surrounding animal welfare and food production. Strong customer-centric attitude, exhibiting high energy and strong sense of urgency.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Mentor Req ID: 27824 Purpose To perform quality checks and other quality related tasks for the consumable division. Job Duties and Responsibilities Provides technical support to engineers and scientists in areas such as production, operations, maintenance, safety, testing, process improvement or product development. Gathers, maintains, formats, compiles and manipulates technical data using established formulae and procedures and performs detailed mathematical calculations. Must have an uncompromising attitude towards quality. Must thoroughly understand, enforce and follow the Lincoln Electric Quality Management System as it applies to all daily activities. Encouraged to initiate changes for continuous product and process improvement. Maintain manufacturing quality performance metrics and/or quality records. Assist with the evaluation, proper identification, and disposition of all non-conforming items and materials. Be aware of all products, documents, and process changes in your area of responsibility which affect quality. Utilize the Quality Management System and appropriate divisional personnel to support or drive Continuous Improvement Assist in the training and performance feedback of production personnel to production supervision. Develop and perform random process and product audits. Requirements Minimum 2 years of experience. Has full proficiency in a range of technical processes or procedures (or deep skills in a single area) through job-related training and considerable work experience. Completes a variety of atypical assignments. Works within defined technical processes and procedures or methodologies and may help determine the appropriate approach for new assignments. Works with a limited degree of supervision, with oversight focused only on complex new assignments. Acts as an informal resource for colleagues with less experience Completion of Lincoln Electric 6 Sigma Gray Belt online training or direct equivalent is highly desirable. Additional technical training in the Quality Assurance field or Root Cause Analysis is highly desirable. Ability to work rotating shifts. Demonstrated computer skills in MS Office and Windows operating system. Knowledge and understanding of divisional products & related processes. Basic knowledge of Lean principles, 5S, quality assurance tools, procedures, measurement techniques Ability to develop and maintain records and to follow projects through to conclusion. Excellent oral, written communication and people skills Excellent organizational skills to handle a constantly changing set of priorities with minimal supervision. Capable of frequent standing, walking, and lifting up to 60 lbs. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Posting End Date: Accepting applications until job is filled and/or up to 60 days from the posting date. Job Location: Fort Morgan, CO Job Type: Full Time Shift(s) Available: 2nd Compensation: $26.25/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Standing, walking, or sitting for the entire shift Using stairs Reading and recording temperatures with a thermometer Communicating professionally with operations teams Working independently with minimal supervision Required Qualifications Legal authorization to work in the U.S. without visa sponsorship Must be 18 years or older Ability to read, write, and speak English Basic math skills (addition, subtraction, multiplication, division) Ability to communicate with all levels of production and management Willingness to work flexible hours, including overtime, weekends, and holidays as needed. Preferred Qualifications Previous Cargill experience Prior food safety knowledge or experience Experience using a computer for data entry or documentation Familiarity with HACCP, GMP, or other food safety systems Ability to work in a fast-paced, team-oriented environment Please note that this position does not include relocation reimbursement Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Job Title: Infrared (IR) Technician Pay Range: $25-$30 per week with additional OT and travel pay The Infrared (IR) Technician is responsible for performing thermal imaging inspections and diagnostics on electrical and mechanical systems to identify potential issues before failure. This role supports ABM's commitment to preventive maintenance, safety, and operational efficiency across client facilities. The pay listed is the base hourly rate for this position. A specific offer will vary based on applicant's experience, skills, abilities, geographic location, and alignment with market data. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM Team Member Benefits | Front Line Team Members | (Programa de Beneficios de ABM) Key Responsibilities Conduct infrared thermography inspections on electrical panels, switchgear, motors, and other critical equipment. Analyze thermal images to detect anomalies such as loose connections, overloads, and insulation failures. Prepare detailed inspection reports with findings, recommendations, and corrective actions. Collaborate with maintenance teams to schedule repairs and ensure compliance with safety standards. Maintain and calibrate IR cameras and related diagnostic tools. Adhere to ABM safety protocols, including Lockout/Tagout (LOTO) and PPE requirements. Support predictive and preventive maintenance programs for client facilities. Communicate effectively with clients and internal teams regarding inspection results and next steps. Career path will include additional training for NETA testing Qualifications High school diploma or equivalent; technical certification preferred. 2+ years of experience in electrical systems maintenance or IR inspections. Knowledge of NFPA 70E electrical safety standards. Strong analytical and reporting skills; proficiency with IR imaging software. Ability to work independently and manage multiple client sites. Physical Requirements Ability to lift up to 50 lbs and work in various environments (indoor/outdoor, heights, confined spaces). Comfortable with PPE and safety gear for electrical environments. Why ABM? Competitive pay and benefits. Opportunities for growth and certification advancement. Work with a leading facilities services provider committed to innovation and safety. #200 About Us ABM (NYSE: ABM) is one of the world's largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM's comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries - from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit ******************* ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you'll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you're looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ******************* ABM does not accept unsolicited resumes.

Metalcraft of Mayville Metalcraft of Mayville is an Equal Opportunity Employer:Minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity 2nd Shift Product Testing Technician (Scag Power Equipment) US-WI-Mayville Type: Regular Full-Time # of Openings: 3 Category: Engineering Scag Power Equipment Overview Metalcraft of Mayville is seeking Product Test Technicians on 2nd Shift at our Mayville, WI facility. As a Product Test Technician for Scag Power Equipment, you will be primarily responsible for daily operation of equipment according to designated test procedures. The equipment tested and operated in this role, is primarily turf care and landscaping equipment, such as lawn mowers, mini-track loaders and wheel loaders. This position will require work in both indoor and outdoor environments, with a large majority of the time being spent outdoors. You will also support the test engineering department in other tasks as needed. Responsibilities Test equipment operation according to test plan Perform and document maintenance checks at specified regular intervals Fill out daily test log documentation Reports issues to test team Other duties as assigned Qualifications Must maintain constant safety consciousness Ability to operate machinery Must have excellent written and verbal communication skills Mechanical competency and related experience Ability to consistently and correctly execute repetitive test procedures over extended periods of time Ability to work in outdoor and indoor enviroments Equal Opportunity Employer-minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity. PM17 Compensation details: 7.24-7.25 Hourly Wage PI4b9fc56646c4-37***********1

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Coordinates and participates in installing unit or system to be tested in test fixtures, connecting valves, pumps, hydraulic, mechanical or electrical controls, cabling, tubing, power source, and indicating instruments. · Participates in installations and hardware changes. · Sets up the tested product to the proper operating conditions, collects corresponding data and tears down equipment. · Confers with engineering personnel to resolve fabrication problems relating to specifications and to review test plans, such as types and cycles of tests, conditions under which tests are to be conducted, and duration of tests. · Examines parts for conformance, using precision measuring instruments; may recommend replacement of defective parts where needed. · Activates controls to apply electrical, hydraulic, pneumatic, or mechanical power and subject test item to successive steps in test cycle. · Monitors controls and instruments and records test data for engineers. · Utilizes a basic understanding of controls and instrumentation. · Under general supervision, provides basic data analysis to ensure quality and uncover trends. · Collaborates with engineers regarding data analysis and conclusions. · Participates in Continuous Improvement activities--processes, results and cost savings. · Receives regular mentoring from higher level technicians; provides basic mentoring to lower level technicians. · Completes technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines; situational awareness and identify unsafe behaviors and conditions. · Complies with 5S and housekeeping standards Knowledge, Skills, Abilities, & Behaviors Required: · Basic mechanical knowledge and/ or basic knowledge of internal combustion engine, diesel/gas engines, test cell operations or data collection systems. · Ability to operate PC or PDP11 controlled equipment. · Proven ability to work successfully with computers, including Microsoft Suite experience. · Ability to successfully communicate and interact with other team members, customers, and management. · High School Graduate or equivalent (GED). · Associates degree with a Technical focus or 18 months of related experience in general industry. Physical Demands and Working Conditions: · While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventive maintenance, and/or design of mechanical, and electrical equipment improvements as well as complex systems as the employee's job specialty requires. Provides troubleshooting support on equipment and technical support on production lines as appropriate for the employee's job specialty. Maintains in-depth technical knowledge of numerous systems as the employee's job specialty requires. Performs research and procedures as the employee's job specialty requires. · Programs, troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive equipment and interprets results for analysis, equipment condition assessment, troubleshooting and proactive maintenance. Including but not limited to infrared thermography, ultrasonic testing, power quality analysis, laser interferometry, ball bar, and vibration analysis. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Identifies and sources parts, supplies and repair items as necessary. Suggests alternative items and engineered solutions to improve reliability. · Independently performs maintenance as per industry standards. · Complies with 5S and housekeeping standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Studies and investigates technical and systems methods, tools, and innovations that can be implemented in ATS sites to improve maintenance practices and updates documentation. · Prepares input for cost analysis for new equipment, repair/rebuild proposals, cost savings and innovations as required. · Updates records and reviews CMMS history and analyzes data. · Provides technical contents of sales quotations and performs T&M duties as required. · Trains and coaches less proficient technician. Assumes project manager responsibilities as assigned. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 7 years of related experience in specific industry; or, 10 years of experience in specific industry. · Proficiency in predictive technologies including vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use hand tools and specialized tools as appropriate. · May be required to travel. · Six Sigma experience desired. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. Pay Range$100,556.65-$128,603.05 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventive maintenance, and/or design of mechanical, and electrical equipment improvements as well as complex systems as the employee's job specialty requires. Provides troubleshooting support on equipment and technical support on production lines as appropriate for the employee's job specialty. Maintains in-depth technical knowledge of numerous systems as the employee's job specialty requires. Performs research and procedures as the employee's job specialty requires. · Programs, troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive equipment and interprets results for analysis, equipment condition assessment, troubleshooting and proactive maintenance. Including but not limited to infrared thermography, ultrasonic testing, power quality analysis, laser interferometry, ball bar, and vibration analysis. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Identifies and sources parts, supplies and repair items as necessary. Suggests alternative items and engineered solutions to improve reliability. · Independently performs maintenance as per industry standards. · Complies with 5S and housekeeping standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Studies and investigates technical and systems methods, tools, and innovations that can be implemented in ATS sites to improve maintenance practices and updates documentation. · Prepares input for cost analysis for new equipment, repair/rebuild proposals, cost savings and innovations as required. · Updates records and reviews CMMS history and analyzes data. · Provides technical contents of sales quotations and performs T&M duties as required. · Trains and coaches less proficient technician. Assumes project manager responsibilities as assigned. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 7 years of related experience in specific industry; or, 10 years of experience in specific industry. · Proficiency in predictive technologies including vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use hand tools and specialized tools as appropriate. · May be required to travel. · Six Sigma experience desired. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. Pay Range$35.92-$45.93 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Travels to customer site for calibration, repair, and technical support when necessary. · Reads quality control manual and testing specifications to obtain data to test or calibrate specific devices. · Selects and installs accessories, such as adapters, indicating gauges, or holding devices on test or calibration fixture, and connects instrument or device to fixture, according to specifications, using hand tools. · Sets controls to regulate factors, such as current flow, timing cycle, pressure, temperature, or vacuum, according to specifications, and activates test or calibration equipment. · Observes readings on meters and gauges, and other displays and performance of device or instrument to identify functional defects and determine calibration requirements. · Adjusts calibration mechanisms to obtain specified operational performance of device or instrument, using hand tools and precision measuring and calibrating instruments and equipment. · Applies sealing compound on calibration mechanism to prevent readjustment of settings and loss of calibration. · Rejects malfunctioning devices and routes devices to specified department for rework or salvaging of parts. · Prepares calibration certificates and data reports. · Processes required service report paperwork. · Interacts with other departments and personnel to resolve any related issues. · May perform more advanced functions as part of training and development. · Participates in Service/Quality Initiative; continually improves processes; quantitatively monitors processes. Completes required quality core classes and uses skills and techniques presented. Uses the Core Values in work environment. Adheres to company/customer safety procedures. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Associates degree from a junior college or technical school; and one year related experience or equivalent combination of education and experience. · Ability to: read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals; write routine reports and correspondence; speak effectively before groups of customers or employees of organization; work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry; apply concepts such as fractions, percentages, ratios, and proportions to practical situations; apply common sense understanding to carry out instructions furnished in written, oral, or diagram form; deal with problems involving several concrete variables in standardized situations. Desirable KSAs: · Must be a team player · Organized · Self-motivated and able to prioritize Competencies: · Communications · Customer Focus · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Looking for a Technical Business System Analyst in the Management Information Systems team (MIS) that would support and build enhancements within the ServiceNow platform, as well as any homegrown inventory, audit, and compliance portfolio to provide functional & technical support to internal business customers. This person will help understand functional requirements to provide lean and effective solutions using the appropriate technology stack in an agile manner. They will also support other teams in testing, implementation, and production support where needed while following all internal processes for development and operations. Key Responsibilities: Manage backlog, gather requirements, design, test & support various implementations, enhancements, and upgrades on the ServiceNow platform with minimal supervision. Actively participate and collaborate in a mature operational model and help enhance processes. Collaborate tasks with vendor technical support, other internal systems teams, and project development staff to ensure successful COTs/SaaS integration implementation within the enterprise Manages the ServiceNow/UCMDB/Flexera Discovery infrastructure, including schedules, credentials, mid-servers and patterns Help design, test, and support RESTful web services, Linux and scripting environments, integrations, database, and server development Support software and web architecture requirements analysis, testing and maintenance Leverage deep functional knowledge to independently design and develop smart and innovative solutions to satisfy business requirements Develop deep understanding of tie-ins with other systems and platforms within the corporate systems landscape Ensure key documentation is completed to a high standard and present technical information to senior management in a concise manner Hands-on ability to build quick prototypes/visuals to assist with high level product concepts and epic stories Write and maintain strong unit, functional and integration tests ready to be automated in a continuous integration environment Active participation in evolving our application platform to meet scaling, security, and compliance need Required Qualifications: 5+ years of hands-on experience working with multiple ServiceNow modules like ITSM, Change-Incident-Problem Management, Asset Management, CMDB, Release Management, GRC, or Vendor Risk Management. Experience in working on RESTful web services, Linux and scripting platforms and technical audit platforms is preferred Experience in Software Asset Management (SAM) / IT Asset Management (ITAM) domain for both on-prem and SaaS software platform, USU, SNOW License Manager or Client Asset Manager Excellent analytical, problem-solving skills with clear and concise communication - verbal and written Minimum of 8 years of related experience with a bachelor's degree in computer science (or equivalent work experience); or 6+ years and a master's degree in computer science (or equivalent work experience) Nice to have: Certifications in ServiceNow administration is preferred Software Asset Management (SAM) certification is a plus Advanced Microsoft Excel, PowerPoint knowledge is a plus Exposure to collaboration tools such as SharePoint, Confluence and Jira Able to perform the complete system life cycle using Agile Engineering and Agile Scrum Methodology preferably in JIRA Familiar with VMware, AIX, KVM virtualization and Docker, Kubernetes app virtualization Strong Linux, OS skills & Web UI experience as an analysis

* Travel: All expenses are paid by the company. What this Job Entails: The Field Technician III will provide support to all assigned locations, including data centers and Points of Presence (POPs), and physical site services. The person in this role will coordinate with network teams as well as local vendors for installation, repair and maintenance activities. The Field Technician must have deep knowledge and professional experience deploying (physical layer) rack and stack configurations. This role requires travel. Scope: Works on assignments that require considerable judgment and initiative. Makes recommendations for solutions Works within guidelines and takes ownership of results. May act as a mentor to less experienced team members Your Roles and Responsibilities: Maintain the highest quality standards in all assigned data center locations and remote points of presence (POP). Perform physical installation, repair, maintenance, and testing activities as directed with meticulous attention to driving and maintaining the highest quality standards in the telecommunications industry. Perform card adds or replacements, software upgrades, and associated testing. Recommend improvements to processes that may impact the quality of our network assets or improve overall efficiencies for any related process or system. Provide site survey support for OSP and ISP projects, as well as large space & power and/or equipment deployments. Perform site audits and reconcile data discrepancies in coordination with Network Surveillance and other groups as necessary. Manage local construction vendors working on behalf of the company to ensure compliance with installation, repair, maintenance MOPs and standards, as well as quality and cleanliness. Meet/coordinate with Local Exchange Carrier (LEC) and other technicians to facilitate timely installation, repair, and maintenance activities as necessary. Perform site surveys in support of network builds, augments, or decommissions. Coordinate site access, equipment staging, and other tasks Adeptly leverages knowledge and expertise Other duties as required. This list is not meant to be a comprehensive inventory of all responsibilities assigned to this position Required Qualifications/Skills: Associate's degree (A.A) or equivalent from two-year college or technical school and 5+ years' related experience and/or training; or equivalent combination of education and experience Networks with senior internal and external personnel in own area of expertise Demonstrates good judgment in selecting methods and techniques for obtaining solutions Experience working with data center and POP infrastructure, including experience or deep understanding of OSP, ISP, interfacility cabling, fiber and copper distribution, AC/DC power systems, environmental controls, and relay rack/cabinet/cage construction. Experience with installing and maintaining a wide variety of telecom/network equipment, including DWDMs, backbone and management routers, IP switches, as well as all optical and digital infrastructure. Deep understanding of splicing, and an understanding of how to maintain and operate within a manhole, vault, or handhole environment. Experience with telecommunications testing equipment from microscopes and source and power meters to OTDRs and experience testing across all SONET and Ethernet bandwidths. Extensive knowledge of telecommunications testing standards and procedures from length, wire-mapping, and bit error rate to power, delay, loss, reflectance and dispersion. Experience with state and local regulatory standards, procedures, and permitting requirements. Ability to work effectively with local exchange carrier (LEC) and other telecom service provider technicians, building landlords, electricians, construction operators, and non-technical end users. Ability to work independently, diagnose problems and take appropriate action with minimal supervision. Proficiency with spreadsheets, workflow and project management applications, and administrative software applications. Experience working with a Tier-1 ITSM platform