Advanced engineer jobs in Cupertino, CA

K2 Pure Solutions, founded in 2010, is a Chlor-Alkali Manufacturer operating inherently safer technology to produce chemicals such as bleach for water disinfection in the surrounding Northern California communities. Bleach is the modern, preferred water treatment chemical displacing chlorine throughout the world. K2 Pure Solutions produces bleach onsite from nothing but salt, water, and electricity eliminating the danger and risk of a chlorine railcar release into communities trans-America. Other chlor-alkali products produced by K2 Pure Solutions include chlorine, hydrogen, hydrochloric acid, and caustic soda. The Production Engineer acts as an experienced technical resource for plant operations in a modern Chlor-Alkali production facility, applying technical skills to optimize plant performance, resolve problems, and enable safe and environmentally acceptable production of low cost, quality products. Solid technical skills combined with excellent communication, organizational ability, and leadership attributes are key to both immediate and long-term success in the role. Responsibilities Understands and applies all Environmental, Health & Safety (EH&S) operational requirements. Understands chemical engineering fundamentals and provides technical advising on operations while maintaining high standards for process safety. Optimizes daily production to achieve business and plant goals (i.e. EH&S, quality, reliability, cost). Participates in advanced troubleshooting and coaches others to learn these skills. Participate in commissioning of new process equipment installations. Coordinate and assist in implementation of minor plant system changes. Including small equipment additions, modifications and/or deletions and minor process design. Coordinates and follows up the improvement project of production efficiency. Provide operational and technical support to project coordinator(s) for large, extensive plant system changes. Includes operational review, assistance with cost/benefit analysis, and participating in Hazard Reviews. Assist in writing and reviewing Unit Operating Procedures in assigned areas of the Plant. Support plant leadership with plant material balances, yields, closures, project design scope, etc. as deemed necessary to maintain operations. Completes process engineering study and design for new projects and coordinate with Engineering Department to complete projects. Assist with annual expense budget preparation. Participate in committees as assigned. Performs special projects and studies as assigned. Carry out cost/benefit analysis for special projects. Perform internal technical training sessions for operating personnel. Share weekend call duty with other Tech staff personnel. Perform duties in a manner that protects personal safety as well as the safety of all personnel on site. Whenever appropriate; promptly report Safety, Health or Environmental incidents or issues to management so the situation can be corrected. Perform the primary thinking encompassed by this job description. Comply with all Company policies and procedures. Fully support Company goals of continuous improvement and operational excellence at strategic and tactical levels including reviewing area of responsibility for improvement opportunities to initiate projects or communicate ideas to management as well as active participation on project teams Maximizes plant production capability and assists with tracking and evaluation of asset utilization data for areas of responsibility. Facilitates and ensures that appropriate root cause analysis is completed and corrective actions are implemented to address unplanned events. Collaborate with project team to identify and prioritize improvements. Occasionally interface with contractors and vendors as project/process owner. Qualifications Bachelor of Science in Chemical Engineering 3+ years plant engineering experience (prefer manufacturing/plant operation experience in a Chlor-Alkali, bleach production facility and/or experience with chlorine scrubbers). Company Benefits • Subsidized medical, dental, and vision insurance • Medical and dependent care FSA options • 401k company matching with immediate vesting • 8 company paid holidays plus 2 floating holidays of your choice • Employer paid 1x annual life insurance • Paid sick leave • Paid vacation that increases with years of service • Regular social events for employee & employee's family Salary Range - The starting base pay for this role is between 110K - 185K annually at the time of posting. The actual base pay depends on many factors, such as education, experience, and skills. Base pay is only one part of K2 Pure Solution's competitive total compensation package that can include strong benefits, perks and bonuses. The base pay range is subject to change and may be modified in the future.

Job Title: Manufacturing Engineer Compensation: $100,000 -$125,000 Full employer-covered medical, dental, vision, and life insurance for employee, 401(k) ** VISA SPONSORSHIP AND RELOCATION ASSISTANCE ARE NOT AVAILABLE FOR THIS ROLE ** EXPERIENCE WITH SEMICONDUCTOR MANUFACTURING PROCESSES IS A MAJOR PLUS! What You Will Be Doing: Develop and maintain detailed manufacturing process documentation including Operation Method Sheets, test procedures, test protocols, and quality checklists for electromechanical assemblies. Design custom fixtures, shop drawings and production tools to enhance efficiency, accuracy, and repeatability in manufacturing workflows. Translate engineering designs into clear instructions and shop drawings for production teams. Lead engineering build efforts and support assembly of complex control systems and modules. Partner with teams across Sales, Quality, and Production to refine manufacturing methods and improve outcomes. Identify and resolve production and quality issues through hands-on troubleshooting and structured problem-solving. Contribute to customer projects, ensuring deadlines and quality standards are consistently met. What You Bring: A bachelor's degree in Mechanical Engineering, preferably with experience in high-tech or semiconductor manufacturing. 5-8 years of hands-on experience in machining or fabrication, particularly with metals and plastics. Strong proficiency in SolidWorks and extensive knowledge of Geometric Dimensioning and Tolerancing (GD&T). A practical, problem-solving mindset with a strong mechanical aptitude and a data-informed approach. Clear and confident communication skills, with the ability to present ideas and results to both internal stakeholders and external customers. Working knowledge of manufacturing software, Excel, and standard business analysis tools. Ability to work independently, stay organized, and contribute in a fast-paced, cross-functional team environment.

Job No. ROCGJP00038410 Client: Genentech Contract Duration : 1 Year Rate: $35 - $40/hr. This position supports the establishment of a world-class packaging organization by providing technical expertise in the development and deployment of new packaging systems for pharmaceutical products and combination products. The selected candidate will work on a variety of packaging initiatives and will support Global Packaging Development in establishing packaging systems for clinical and commercial use. Job Responsibilities Develop and qualify global primary and secondary packaging solutions for sterile, non-sterile and combination products, incl. author/co-author the related packaging specifications and qualification documentation Qualification of global packaging solutions in line with the current validation requirements (e.g. Development of test protocols and reports, risk assessment, execute IQ/OQ/PQ, and shipping qualification) Maintenance of global packaging solutions (e.g. support change control records, provide impact assessments, execute requalification) Evaluate and develop new materials and/or alternate packaging materials, packaging solutions or packaging systems based on product, regulatory, business or technical requirements Support or lead projects delivering innovative packaging technologies and systems under Roche global packaging technology centers Qualifications Education & Qualifications: Personal Requirements: Bachelor degree, preferably with an engineering degree in packaging, materials science, or a related field At least 1 year working experience in relevant field Proficient technical leadership, collaboration and communication skills English language proficiency required Technical Requirements: Knowledge of packaging testing methodologies and standards including, shock, drop and vibration testing, peel force and tensile testing, barrier analysis, CCI/Sterile integrity, DIN, ISO, ISTA, USP, FDA, MHRA and ASTM standards for packaging design and validation Knowledge of packaging process equipment, related to steriles, and non-steriles, and combination products packaging activities (e.g. vials, PFS, devices, aseptic form/fill/seal, blister and bottle filling lines), printing systems and serialization Knowledge on equipment IQ, OQ, and PQ and development of qualification protocols / reports for packaging and shipping qualification activities Knowledge of design control for combination products Working knowledge of computer systems including TOPS, CAD or Solidworks, and Microsoft tools including MS project, and Adobe Knowledge of industry best practices and technical writing skills such as GMP and GDP

About us Redwood Electric Group is a large business providing electrical construction and design services. We operate throughout the Greater Bay Area with offices in Santa Clara, San Leandro, Vacaville, and Sacramento. At Redwood Electric Group, our philosophy is focused on the commitment to our customers. Their success is a direct reflection of our success. Our business continues to reflect strong growth through innovation and our team's commitment to exceed customer expectations. Duties/Responsibilities: Develop and refine electrical system layouts, schematics, and specifications. Review and process equipment and system submittals to ensure compliance with project requirements. Prepare and modify drawings, ensuring accuracy and clarity in design documentation. Utilize AutoCAD, Revit, and engineering analysis software for system design and documentation. Conduct power system analysis, including short circuit, voltage drop, and arc flash studies. Perform load calculations, lighting level analysis, and energy efficiency assessments. Support equipment selection, panel schedules, and system coordination. Ensure all designs adhere to NEC, energy codes, and client-specific guidelines. Collaborate with multidisciplinary teams to integrate electrical designs into overall project plans. Attend meetings with clients, architects, and contractors to resolve design issues and refine project scope. Conduct site visits to evaluate existing electrical conditions and support field installations. Contribute to the continuous improvement of our design processes. Provide engineering support during construction to ensure successful project execution. Required Skills/Abilities: Strong knowledge of electrical engineering principles, including power distribution and lighting systems. Proficiency in AutoCAD, Revit, and engineering analysis software. Familiarity with NEC and other relevant electrical codes and standards. Ability to analyze and interpret electrical specifications and technical documents. Effective problem-solving skills and the ability to manage multiple tasks. Actively contribute to a collaborative team environment, where your expertise and innovative ideas are highly valued. Strong communication skills, both written and verbal. Education and Experience: Bachelor's degree in Electrical Engineering, Architectural Engineering, or a related field. Minimum of 2 years of experience in electrical design or engineering within the construction industry. Engineer-In-Training (EIT) certification preferred, with encouragement to pursue Professional Engineer (PE) licensure. Experience with commercial, high-rise residential, or data center projects is appreciated. LEED AP certification is appreciated. Proficiency in Microsoft Office applications (Word, Excel, Outlook). Working Conditions This position is based in our Santa Clara office and is not eligible for remote work. Work may be performed in an office or on active job sites, depending on role and project needs. Office work includes sitting, typing, and using a computer for extended periods. Field environments may involve walking, standing, bending, or lifting materials (up to 30 lbs). Noise levels range from quiet (office) to high (job sites). May require occasional travel to project locations or meetings. REG will provide reasonable accommodations as required by the ADA and applicable state law. Disclaimer The duties and responsibilities listed above are representative of the work typically performed in this role but are not intended to be a comprehensive list. Actual responsibilities may vary depending on department needs, project scope, or business requirements. Employees may be assigned additional tasks as needed to support company goals and operations.

• Study time, motion, methods, and speed involved in maintenance, production, and other operations to establish standard production rate and improve efficiency. • Interpret engineering drawings, schematic diagrams, or formulas and confer with management or engineering staff to determine quality and reliability standards. • Read worker logs, product processing sheets, and specification sheets, to verify that records adhere to quality assurance specifications. • Aid in planning work assignments in accordance with worker performance, machine capacity, production schedules, and anticipated delays. • Prepare charts, graphs, and diagrams to illustrate workflow, routing, floor layouts, material handling, and machine utilization. Required Skills: • Creativity, verbal and written communication skills, analytical and problem-solving ability. • Team player and detail oriented. • Ability to make sketches, engineering drawings and common computations. • Ability to read and interpret blueprints, technical drawing, schematics and computer-generated reports. • Previous experience with computer applications and software related to engineering field, such as Computer Aided Design (CAD). Education/Experience: • Bachelor's degree in engineering required. • 5-7 years of experience required. Pay for this position is based on market location and may vary depending on job-related knowledge, skills, and experience. As a contractor you may also be eligible for health benefits such as health, dental, and vision as well as access to a 401K plan. Applicants should apply via The Mice Groups Inc. website (******************* or through this careers site posting. We are an equal opportunity employer and value diversity at The Mice Groups Inc. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Pursuant to the Los Angeles Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. The Mice Groups Inc. values your privacy. Please consult our Candidate Privacy Notice, for information about how we collect, use, and disclose personal information of our candidates. Privacy Policy One of the basic principles The Mice Groups follows in designing and operating this website is that we ask for only the information we need to provide the service you've requested. The Mice Groups does not currently collect personal identifying information via its website except (i) to the extent that you provide this information in an online job application and (ii) to the extent that your web browser provides personal identifying information. The Mice Groups will use your personally identifying information solely for the purpose for which you submitted the information. The Mice Groups may, however, aggregate certain elements of your personal identifying information with the information of other users of our website to analyze the usefulness and popularity of various web pages on its website. The Mice Groups reserves the right to change this policy at any time by posting a new privacy policy at this location. Questions regarding this statement should be directed to *******************

Riedinger Consulting is a Sausalito based firm that specializes in management and analysis of engineering and construction projects. In business since 1997 as a woman-owned business, Riedinger Consulting assists public and private owners, general contractors, subcontractors, and design consultants with contract dispute resolution and project management services. Job Description Project Engineer/Staff Consultant will perform multiple tasks in support of both project management and contract dispute services on a variety of construction projects. As part of project management services, Project Engineer performs the following in support of the Project Manager: Attend weekly construction job site meetings with the Owner, Architect, and Contractor. Prepare meeting agenda and meeting minutes. Review, coordinate, and track submittals, shop drawings, requests for information (RFIs), and change proposals. Review project schedules submitted by Contractor and track construction progress. Collect Contractor daily reports and review. Ensure that the project site and construction activities are being consistently documented in writing and in photos. Assist with review of Contractor proposed change orders, and help prepare change orders for Owner approval. Coordinate and manage the drawings and specifications, clarification and interpretation, shop drawings, and submittal review processes. Coordinate the activities of the materials testing sub-consultant(s). Identify plan/construction issues and bring them directly to the attention of the Owner and design team before discussing them with the Contractor. Work to resolve conflicts and issues that may arise during construction of the Project. Quality Assurance/Quality Control: Assist Project Manager in verifying that all materials installed coincide with the approved submittals. File hard or electronic inspection reports, test reports, etc. Ensure that the Contractor maintains field mark-up drawings for use in preparation of as-builts and verify records for accuracy before final close-out. Collect, compile, review, and ensure that as-built information is accurately shown in the original set of plans. Review as-builts from Contractor and submit to the Owner a final set of as-builts. Participate in the job closeout process. As part of contract dispute services, Staff Consultant performs schedule, labor productivity, issue, and cost analyses. Analyses include the review of contemporaneous project documents including: Contracts and contract plans and specifications Project schedules and cost estimates Change orders and change order requests Job cost reports and labor reports Contractor daily reports and inspection reports Requests for information, correspondence, and emails Progress payments and progress photos Meeting minutes From this review, consultant will find information relevant to the preparation or defense of a construction claim. Additionally, Staff Consultant will work with the client's project team to get information about the project and the key issues impacting the project schedule. Consultant will summarize key information, findings, and conclusions in summary spreadsheets, schedules, exhibits, reports, and presentations for review by senior management and legal counsel. Specific Skills and Expertise 3-5 years of experience in construction management. B.S. degree in engineering, preferably civil or mechanical, or bachelor degree in construction management or architectural engineering. Proficient in use of MS Excel, Powerpoint, Word, and construction management software, such as Procore. Scheduling experience using Primavera P6, and MS Project. Excellent organizational, writing, and communication skills. Ability to read plans & specifications. Ability to analyze and interpret data, to summarize key information, and draw conclusions in a compressed timeframe. Attentive to details. Exercises creativity and resourcefulness in completing tasks accurately. Ability to work independently or in teams. Prioritizes and plans work activities. Core Values Strives for excellence. Positive, can-do attitude. Offers outstanding client service. Inspires respect and trust. Takes initiative to identify and analyze problems and propose solutions. Demonstrates and promotes high standards for quality and productivity. Contributes to building a positive team spirit and working environment. Demonstrates professionalism and accepts responsibility for own actions. Follows through on commitments. How to Apply Please send us your resume along with a cover letter describing your qualifications for the position to Kim Maynard: (***************************) with subject “Project Engineer/Staff Consultant.” Thanks for your interest! Please note that Riedinger Consulting is not able to provide visa sponsorship. We require candidates to already have work authorization in the U.S. without the need for employer sponsorship.

SQL, API, AI, Analytics, ERP, Quoting, Sourcing, Procurement Sonic Manufacturing Technologies (Fremont, CA USA) built the first Digital Supply Chain in the electronics industry. A project started more than 20 years ago, before the term “Digital Supply Chain” existed, and it continues to evolve and to this day. Currently the computer solves for data accuracy, calculates demand, finds components through supplier connectivity, procures by business rules, confirms orders, obtains status, issues change order, tracks shipments, receives invoices and authorizes payments; all autonomously. This is about 75% of our procurement activity of 1M parts per week from leading suppliers around the globe. Half these parts arrive at Sonic within 5 business days of order placement. Now, we are adding Agentic AI to our capabilities. There is nothing faster or more accurate than a Digital Supply Chain. If you have graduated with an engineering and operations management, business, supply chain, industrial/mechanical or mechatronics engineering degree; and have performed coursework in data analytics or SQL programming, we want to hear from you. If you have experience in business that includes SQL or data analytics but grow tired of producing wall metrics for conference room committees and dashboards for managers that never seem to change things; we want to make you an offer: Program your mind and hands into the digital supply chain as an extension of yourself and watch it unfold into transactions around the globe, shipments traversing terminals, components moving into inventory, production launched in the factory and physical product handed to customers. If your ideas don't result in physical products; you gain instant feedback from the world (Truth) and get to do better in Round 2. Qualifications? Mostly character. There are so few people qualified to do this; we teach the coding. If you are a self-motivated life-long learner, want to make an impact on over 100 OEM Silicon Valley technology customers including name brands you know, impact the livelihood of hundreds of employees by successfully competing with globalization (“China”), and be first to build-out the digital infrastructure that is the future-state of supply chains; this is for you. It is a global game of chess, always looking for the best move on an ever-changing board. The Routine? Your time will be split between procurement and programming/analytics so you learn the real world as a part of the purchasing team; experiencing the same problems and always asking, “How can I do this better?” No remote coding from 'specification'. We will brainstorm the changes to processes and coding, rev it into the live supply chain, and experience the results. Our internal time-frame for a coding project is measured in minutes, hours, or days. Longer horizons are only limited by the speed of external partners and suppliers. US Citizens or Green Card Holders ONLY at this time. Recruiters not accepted. *************** | **************** #supplychain #analytics #digitalsupplychain #API #SQL #ERP #MRP

Ultimate Staffing is seeking an Electrical Test Technician/Failure Analysis Engineer in Computers/Laptops for our client in Santa Clara. This is a 100% onsite, temp to perm role with a negotiable starting pay of $35-$45 an hour. Monday -Friday 9am-6pm. Summary The Failure Analysis Engineer uses procedures and instructions to initiate the analysis process when product failure occurs. Investigations are researched for root causes with analysis documented, recorded, and communicated internally and with the client company. Responsible for failure analysis on Customer returned Server/ GPU boards to component level. Essential Duties and Responsibilities include the following. Other Duties not listed may be assigned. Data Analysis/Communication/Issue Resolution - Prevention - 90% of Job · Have ability to system and board level testing and debugging down to components level. · Have knowledge to do component swapping, removal to isolate failures and overall deeper FA · Visual mechanical inspection (VMI) of Server/GPU board components (Motherboards, GPU, GPU baseboard, CPU, DIMM, NIC, SSD, Power Supply, etc.) and/or electronics components · Completes component level trouble shooting (capacitor, resistors, fuse, IC, diode, chip, etc.) and failure analysis · Assembly & disassembly of units, computer components and subcomponents · Skilled in communication, problem solving, and applying experience and expertise. · Complete sample analysis for equipment and process qualifications. · Identify optimum analytical approaches critical to problems. · Conduct innovative use of new analytical tools, equipment, and methodologies. · Develop records and perform various failure analysis on systems and components to identity root cause. · Develop formal failure analysis data reporting and present internally and to client. · Requires communication with Asia team in emails and conference calls. · Be proficient in a large number of applications used for database management and reporting. · Follows procedures and diagrams in performing engineering change orders, as required Other duties as assigned. Education and/or Experience · Bachelor's degree in Electrical Engineering · 4 years experience in a failure analysis role · Comprehensive server knowledge is essential. (BIOS / BMC / CPLD / FPGA, etc.) · Ability to use electronic test equipment (oscilloscopes / multi-meters / thermal imaging camera, etc.) Essential Skills: · Requires excellent written and oral communication skills. · Knowledge of basic Linux environment and commands · Familiarity with Microsoft Office software (advanced excel) · Familiar with computer software and operating systems and possess the ability to identify and perform software updates (BIOS, BMC, Components Firmware, etc.) · Ability to read and interpret schematics/block diagrams with detailed understanding of server and subassembly functionality. · Ability to read and interpret system board views and board layout details · Effectively communicate concepts and solutions with various levels of the organization. · Effectively liaison between Company and Client. · Must be able to work cross-functionally with minimal supervision. · Requires strong analytical and statistical skills. · Requires flexibility to work overtime for special projects or business supports. Desired Skills and Experience Ultimate Staffing is hiring Failure Analysis Engineers to work onsite at our customers' site in Santa Clara CA. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

The Senior Manufacturing / Process Engineer is responsible for developing, implementing, and improving manufacturing processes for electronic assemblies in a high-mix, low-volume environment. This role supports both the U.S. and Vietnam facilities, ensuring process repeatability, cost efficiency, and product quality across SMT, Through-Hole, and system assembly operations. The senior manufacturing process engineer will report directly to the VP of operations. Goals: Build products and provide services with the highest Flexibility, Productivity, and Quality. Achieve total customer satisfaction through technical excellence and responsive engineering support. Ensure successful NPI launches through cross-functional collaboration, process validation, and data-driven feedback to design and quality teams. Objectives: 1. Support production operations in the following categories: a. Reduce downtime caused by engineering issues (programming, MPI errors, tooling, design, or line stoppage). b. Improve quality yield through root cause analysis, corrective actions, and robust process setup. c. Lead NPI and prototype builds, ensuring process readiness, documentation completeness, and manufacturability validation prior to production release. 2. Provide engineering services to meet customer needs and expectations in the following areas: a. Design for Manufacturability (DFM). b. Manufacturing Process Instruction (MPI) creation and maintenance. c. Engineering Change Order (ECO) implementation. d. Defect Reduction Team (DRT) meetings and follow-up actions. e. Failure analysis and corrective action documentation. f. Develop and validate new or modified processes, including process capability studies, DOE validation, and reflow/wave solder profile optimization g. Other engineering requests as required by customers or management. Job Description: SMT / Through-Hole / 2nd Ops / 3rd Ops Process Support Review daily SMT or build schedule to ensure process readiness. Confirm all required items are complete and available prior to production: Job package with full build documentation. Manufacturing Process Instruction (MPI) reviewed and approved. Routing definitions for data collection. Validated reflow or wave solder profiles. ECOs, deviations, or special instructions incorporated into the MPI and/or job package. All required tooling available and verified. Review pre-build DFM, document known defects, and hyperlink details in the MPI. Lead cross-functional NPI kickoff meetings to review design requirements, risk areas, and special process considerations. Document and track NPI issues and lessons learned for future builds. Coordinate with Program Managers to resolve DFM showstoppers prior to build. Analyze previous quality data, identify recurring defects, determine root causes, and implement corrective actions. Design, order, and verify all required tooling (stencils, wave solder pallets, press-fit fixtures, conformal coat fixtures, etc.). Maintain tooling logs, labeling, and readiness tracking within Omega Build Readiness. Inspect and sign off first article setups for critical processes (stencil printer, reflow oven, wave solder, etc.) using the First Article Checklist. Inspect initial boards after print and reflow for solder release, bridging, voids, and process anomalies. Document findings and sign off the First Article Report. Provide on-the-floor training for operators and technicians regarding new processes, corrective actions, or observed deficiencies. Support production by promptly responding to technical inquiries or line support issues. Exercise full authority to stop the line if repeated defects or safety concerns are observed. Quality Data Review & Root Cause Analysis Review production data in Omega Data Collection, identifying root causes and corrective actions. Review Daily, Weekly, and Customer Quality Reports to identify trends, recurring issues, or process gaps. Provide structured analysis and report findings to Quality and Production (using 8D or equivalent methodology). Document corrective actions and verify implementation during the next production run. Present findings and improvement updates in internal and customer quality meetings. Other Responsibilities: Create and submit Post-Build DFM reports to Program Managers with improvement recommendations. Implement and validate ECO changes per revision control procedures. Perform and document detailed failure analyses for internal and customer returns. Participate in process improvement projects and defect-reduction initiatives. Provide customer-driven engineering services or special support requests. Develop and deliver internal technical training for operators and peers. Support ISO 9001 and AS9100 activities, including audits, documentation, and Work Instruction updates. Qualifications: Bachelor's degree in Manufacturing, Industrial, or Mechanical Engineering (or related discipline). 8-12 years of hands-on experience in electronics manufacturing (PCBA, box-build, system integration). Deep understanding of SMT, Through-Hole, and system assembly processes. Proficient in process validation, FAI, SPC, DOE, and yield improvement. Familiarity with FactoryLogix and related MES/ERP systems. Experience leading NPI builds and developing new assembly processes from prototype through production release. Familiarity with DFM/DFT analysis tools and PCB CAD systems (e.g., Altium, Valor, Mentor). Experience with Lean, Six Sigma, and structured problem-solving tools. Strong communication and analytical skills with the ability to multitask in a fast-paced environment. U.S. Citizen or Permanent Resident (ITAR requirement). Compensation: $120-$150K Annually Benefits: Medical Dental Vision 401K + Roth 401K Vacation Paid Holidays

Join Yorke Engineering, LLC, an Environmental Consulting leader in California that implements Environmental Engineering and Compliance solutions for our clients throughout California. Our mission is to solve environmental compliance problems for industrial and governmental/infrastructure facilities. We are a growing and dynamic organization of highly respected professionals. Yorke Engineering, LLC has assisted over 1,400 client organizations with their Air Quality and Environmental Compliance, Engineering, and Permitting needs. Our philosophy is to efficiently help government and industrial customers with the complex array of environmental laws and regulations. From simple permits to complex agency negotiations, from small companies to the largest of California's organizations, Yorke successfully solves our clients' Air Quality and Environmental challenges. Our team has over 1,000 years of combined environmental experience and consists of engineers and scientists that specialize in Air Quality, Waste, Water, CEQA, Safety, and Industrial Hygiene. We are looking for a sharp Mid to Senior level Air Quality Engineer/Scientist (Environmental Permitting and Compliance) to join our team in Northern CA. This is a full-time position at 40 hours per week from one of our Northern CA offices (Berkeley, San Francisco, or San Jose) during our normal business hours. We offer competitive salaries, a full benefits package including Paid Time Off, Holidays, Full Medical/Dental/Vision, along with a 401k program with a generous company match. Position Summary: The Mid to Senior level Air Quality Engineer/Scientist (Environmental Permitting and Compliance) performs professional engineering work, leading and executing the compliance and permitting functions in relation to Air Quality Regulations and Compliance. This candidate will be reviewing processes and equipment, analyzing permit-related technical and regulatory issues, and communicating those analyses within Yorke, the client organization, with government agencies and with the public at large. The work is challenging, broad in scope, and variable from project to project. The position involves effective communication, decision-making, and time management. The candidate performs other duties as required or assigned. The candidate's experience and qualifications we are seeking include: 5-15+ years of work experience in the Air Quality and/or Environmental industry in an engineering role (preferably in a consulting environment); Experience in the environmental services industry focusing on Air Quality services: Process and equipment review; Air quality permitting under BAAQMD, SCAQMD, SJVAPCD and other Air Districts, including Title V Permitting; RECLAIM implementation and reporting; Annual Emissions Reporting; Air Dispersion Modeling; Air Quality Assessments including Data Analysis and Emission Inventories; General Air Quality Compliance for facilities in CA. Ability to be an active team member on project teams towards project completion within project scope, budget and schedule and ensure quality work product and deliverables; Ability to work with clients, staff, and regulators through effective communication and expertise by fostering a collaborative environment without losing focus of quality; Proven track record or desire to engage in successful regulatory work in dealing with the SCAQMD, BAAQMD, SJVAPCD, EPA, CARB and/or other similar regulatory agencies; Experience or desire to work on-site at client facilities; Prepare reports and submissions in timely manner; Experience with handling highly technical data and technical data interpretation; Highly motivated to continue working in Air Quality environmental field and expand their knowledge and experience; CA Regulatory/Compliance experience is required. Job Requirements: B.S or M.S. degree in Chemical Engineering, Environmental Engineering, or Mechanical Engineering, or other relevant technical degrees from an accredited college (minimum GPA of 3.0); Ability to work collaboratively in a team fashion, handle several projects at once, prioritize work, and work efficiently; Desire to learn or developing technical expertise in environmental rules and regulations; Excellent oral and written communications skills; Experience in conflict resolution and crisis management; Track record of successful analysis, interpretation, and application of rules and regulations towards practical solutions; Ability to think critically and develop solutions; Software Knowledge: Strong Microsoft Excel, Word, Outlook, and Powerpoint skills (required); Microsoft 365 Applications, including Sharepoint (a plus) EIT, CPP or P.E. Certification (a plus).

Job Requirements Qualifications: Strong experience in automation testing using Playwright and Typescript (automation first mindset) Experience working as a Quality Assurance Engineer 3+ years' experience in manual testing Strong experience in API and Backend testing of cloud technologies Experience with API contract validation, versioning Experience working with SQL/NoSQL systems UI automation Strong coding experience with automated testing frameworks, tools and services Preferred Qualifications: Fluency in programmatic-level testing, user-level automation, and API level testing Experienced in Agile or Scrum software development methodologies Supply chain experience is plus Role details As a Quality Assurance Engineer, you will play a key role in setting up the testing strategy and tools for testing cloud software systems and features from the ground up. You will test a wide range of cloud technologies both in isolation and within the larger product ecosystem. The successful candidate for this role will be obsessed with finding and categorizing bugs, ensuring feature completeness and assessing reliability and performance of cloud systems. Proven experience as a Software Automation Engineer (2-3+ years) with strong hands-on skills in Playwright/TypeScript. An eye towards automation to perform repetitive testing tasks as well as regression testing covering various versions of end user client software. Provide coding and testing expertise for our team and be a constant advocate for our customers. High level of coding aptitude combined with a demonstrated passion for Quality Assurance and be responsible to own and drive complex projects. Test Automation Frameworks: Design and implement robust Test Automation Frameworks to ensure reusability, maintainability, and scalability of automation scripts. Continuous Improvement: Stay up to date with emerging technologies and best practices in test automation and continuously optimize the test automation process. Strong coding skills in TypeScript/React/Nest and Python/Java Proven experience in UI, API, and backend integration tests

At Apple, we work every single day to craft products that enrich people's lives. Do you love working on challenges that no one has solved yet? As a member of our cellular standards group, you will have the unique and rewarding opportunity to shape the global wireless industry and contribute to upcoming products that will delight and encourage millions of Apple's customers every single day! In this technical role, you will be at the center of our cellular standards group responsible for promoting the wireless technologies of our innovative wireless SoC products. You will have the chance to create algorithms and architectures of wireless communication systems, as well as collaborate with extraordinary RF/analog, HW, SW designers and architects to design SoC products to millions of Apple customers! In this role, core responsibilities include, but are not limited to the following: Designing and simulating wireless communication systems for 5G and 6G technologies, including channel coding, advanced MIMO systems, protocols for energy saving, AI/ML for air interface enhancements, sensing techniques, control and data channel optimization for cellular systems. Attending global standards meetings, including 3GPP, to promote Apple product preferences. Collaborate with product teams and come up with novel architecture, protocols, and algorithms to meet the requirements of emerging applications in a challenging radio environment. Ph.D. with a focus on communication systems, signal processing or AI/ML for wireless communication Knowledge in existing wireless communication protocols, such as 5G/LTE/WCDMA/GSM, 802.11a/b/g/n/ac/ax/be, 802.11ad/ay or Bluetooth/BLE. Strong understanding of communication theory and relevant algorithm design experience on, including but not limited to, timing recovery, automatic gain control, modulation, channel estimation, equalization, MIMO signal estimation and detection, channel coding and error correction, and beam forming algorithms Experience in designing systems that operate efficiently in high-load and noisy environments. Experience on low-power algorithm design for power critical applications. Experience with multi-radio coexistence management. Deep understanding of components/modules within wireless communication systems, and the possible impairments from those components, and the corresponding calibration and impairment reduction methods/algorithms, digital pre-distortion, PAPR reduction algorithms, Tx power control, etc. Experience in modem architecture, microprocessor architecture, hardware and software control. Working knowledge of wireless communication systems (e.g., OFDM/MIMO, etc.). Proven experience in the algorithm development and implementation design of communication systems or signal processing algorithms, and ability to develop and implement performance tuning strategies and optimizations. Experience with Matlab or Python and/or C/C++ for algorithm development, modeling, and simulation. Excellent communication skills to collaborate with cross-functional teams. Motivated to collaborate and contribute as a team, and able to deliver ambitious tasks in a timely manner. BS and 10+ years of relevant experience is required.

@HYVE Solutions, missions to help customers, business partners, and employees achieve success through shared goals, strategies, resources and technology solutions. Salary range: $90K-120K THE SYNNEX CULTURE SYNNEX creates additional value for all of our partners at all transaction points. For the company to succeed, each SYNNEX associate is focused on delivering the finest products, services, and solutions in the industry. SYNNEX values and rewards loyalty, teamwork, integrity, and industry. We encourage team collaboration and the spirit of entrepreneurship. Our associates are our greatest asset, and we are dedicated to providing our team members with the opportunity to realize personal growth and professional success. Get in S•Y•N•C• with SYNNEX Start Your New Career as a……..Quality Engineer THE RIGHT FIT SYNNEX Corporation is looking for a detail-oriented, hands-on, results-driven individual with proven communication skills and a strong work ethic to work in a challenging, fast-paced, energetic environment with responsibilities that include managing all aspects of the quality control production process, fall-out, audits and ISO; ensuring that division and departmental practices comply with company requirements; achieve stated objectives and meet current ISO standards. PRINCIPAL DUTIES AND RESPONSIBILITIES (ESSENTIAL FUNCTIONS) Main point of contact for process quality issues, including any inspection activities, priorities and escalations. Collaborate with production teams to address quality issues and implement corrective actions. Collaborate with PE/TE/PM to ensure alignment on quality objectives and priorities. Support regular inspections and audits of manufacturing processes and products to identify defects or deviations from quality standards. Provide a guidance of the acceptance criteria on the cosmetic issues to QC and MFG team. Coordinate and resolve Stop line, Quarantine and QRQC (Quick Response Quality Control) issues. Refocusing QA resources from data-gathering/reporting to using audit for driving process improvement opportunities. Direct QA resources in performing primarily in-line audits to auditing primary upstream processes. Establish and build closer links between site QA teams and Engineering / Manufacturing teams. Work with internal Production, Engineering, Shipping/Receiving, Warehouse, Program Managers and Procurement to meet quality standards. Develop proactive solutions and implement Quality department strategies across the organization. Customer-facing site-based QA representative who can effectively present and communicate to internal customers and other areas. Direct site QA teams to maintain consistent standards & metrics & to share/implement best practices across products. Review and approve Product and Processes Corrective and Prevention Action Plans (8Ds) and perform additional assessment and analysis as assigned. Perform failure analyses, root cause analysis and corrective action follow-up. Assess and evaluate all reliability testing, equipment service and calibration and the verification process. Execute internal audits on QMS, EMS, ISO 9001 and ISO 14001 standards. Coordinate UL (Underwriter's Laboratory) and other regulatory factory audits. ESSENTIAL CRITERIA BS degree in Computer Science, Electrical, Mechanical or Industrial Engineering or relevant discipline plus 3 years of experience including a combination of 2+ years in contract manufacturing, 3+ years in quality control and 3+ years in a leadership position or equivalent combination of experience. Prior manufacturing engineering and quality experience. Proven understanding of mechanical drawing and/or tools. Experience with server/computer, build or repair processes. Knowledge of key customer processes (i.e. Microsoft, etc.) Demonstrated background in interfacing with key customers within the high tech industry and experience working across multiple sites sharing best practices & implementing process improvements. Working knowledge of MS Office programs; Word, Excel and PowerPoint. Hands on experience with quality system training including understanding of SPC (Statistics Process Control) principles and tools. Established ability prioritizing and managing multiple projects to meet strict deadlines. Flexibility to work in a fast-paced, high volume, and diverse environment across functions to produce expected results. Able to work as business needs require which may include long days, occasional evenings and weekends, and travel to all manufacturing and warehouse locations, for business meetings or training. WHAT SYNNEX OFFERS YOU SYNNEX Corporation (SNX) is committed to investing in our associates. They are our greatest asset, and we are dedicated to providing our team members with the opportunity to realize professional and personal growth. If you share our mission, our strong work ethic, and our values of integrity, continuous learning, quality of work, commitment, teamwork, execution and results, respect for the individual, and taking manageable risks, then SYNNEX may be the place for you. Competitive Compensation Profit Sharing Employee Stock Purchase Plan Paid Vacation Days Paid Holidays Paid Sick Days Direct Deposit Tuition Reimbursement Medical and Prescription Insurance Dental Insurance Vision Care Life & Accident Insurance Development Scholarship Program Flexible Spending Accounts (FSA) Short- & Long-Term Disability Bereavement and Jury Duty Leaves Casual Dress Code Employee Assistance Program Live Well Work Well Program Training Opportunities Pet Insurance “SYNNEX Corporation is an Equal Employment Opportunity employer M/F/D/V and is committed to the Quality Policy.” Note: The preceding job description has been designed to indicate the general nature and level of work performed by employees with this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Top of Form Top of Form @ HYVE Solutions, we believe employees are our greatest asset and we empower them to make a difference in our business. Diversity and inclusion make us all better. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Proterra offers a dynamic and supportive workplace where our employees can thrive personally and professionally. With cutting-edge facilities and groundbreaking projects, Proterra offers unique opportunities to grow, collaborate, and lead transformative change in the electrification of heavy-duty transportation and equipment. Our commitment to innovation extends beyond our battery solutions to our people, where we create an environment where everyone feels valued, supported, and empowered to drive change for the earth. Here at Proterra we strive to foster a culture of inclusivity, valuing diverse perspectives and encouraging bold ideas, allowing our employees to bring their full selves to work. Our employees benefit from competitive total rewards packages, and opportunities to develop professionally. Position Overview This position, as part of the Advanced Manufacturing Engineering (AME) organization, will lead the development of new production test methods and equipment for Proterra's battery packs. This highly collaborative position is a key part of the Battery Technology organization. You will work with other leaders, engineers, and technicians to establish Proterra as a world-class manufacturer of battery-based energy storage. About the Role - You will: Collaborate with battery systems, and design engineering team members to design, validate, and implement new end of line and inline test processes & equipment for Proterra's Battery Systems. Lead development of complex battery module and pack testing methodologies from conception in a lab environment to deployment in a high-volume manufacturing operation. Assist manufacturing engineers in the development of automated test systems by leading requirements and validation of test hardware and software for production systems. Internally develop and write test automation scripts and analysis tools with industry standard tools and software starting in the lab and then scaling into automated high throughput testing equipment Support characterization of new battery pack designs to define manufacturing functional and electrical test tolerance bounds Act as the subject matter expert in battery electrical test principles, battery performance verification methods, and high-volume automated battery test processes at Proterra Create effective documentation for test equipment and processes to aid in knowledge transfer and education within the larger organization Establish manufacturing test data architecture for test applications and specify requirements for data systems Correlate functional defects from end of line and in line test data through automated analysis to streamline quality issue identification and correction About Our Group: The Advanced Manufacturing Engineering group seeks to develop innovative new manufacturing processes and automation tools to establish Proterra as a world leader in battery pack manufacturing. It is comprised of several different teams focused on different aspects of battery manufacturing, including process development and automated manufacturing equipment design. This role is part of the larger Battery Technology Team. The Battery Technology Team's work is guided by our team values: INNOVATION: We think of new ideas and take bold action to bring them to life. ADAPTABILITY: We react quickly to our ever-changing environment. CONTINUOUS IMPROVEMENT: We strive to make our products, services, and processes better. TEAMWORK & COLLABORATION: We work together to solve problems with camaraderie. INCLUSION: We create welcoming spaces where everyone can bring their whole selves to a diverse work community. SUSTAINABILITY: We change the world through environmentally responsible practices. KINDNESS: We are honest, caring, and respectful with each other. You will report to the Sr Manager, Advanced Manufacturing Engineering within the Battery Engineering Organization and collaborate with other team members located at our R&D headquarters in Burlingame, CA and manufacturing facilities in Greer, SC. About You: Proactive and able to work with little supervision Able to adapt interpersonal styles and techniques to influence at all levels of the organization Customer-focused attitude Able to maintain strict confidentiality, establish trust and credibility, and act with complete integrity Detail-oriented, resourceful, and diligent Flexible and open to change Demonstrate sound judgment and problem-solving skills including challenging assumptions Able to prioritize tasks and manage multiple priorities simultaneously Excellent written, verbal, and presentation communication skills Strong time management and organizational skills Able to summarize and present data is a manner that is easily digestible to various technical and non-technical audiences. Ability to travel as needed to Proterra and project-related partner sites Your Experience Includes: Degree in Electrical, Mechanical, Mechatronics Engineering or similar technical field Experience collaborating with cross-functional teams to deliver effective solutions in a manufacturing test engineering, development test engineering, or similar technical role Hands-on experience testing battery-based energy storage systems or electrical power systems Extensive experience with test engineering principles and tools- data acquisition, test circuits, test equipment Experience with CAN bus communications and ability to interpret traces Hands-on experience in Measurement Systems Analysis and Qualification (Gage R&R, Gage Capability, etc.) Extensive experience methodically troubleshooting electrical assemblies and software automation scripts Expert in battery test hardware including bidirectional battery cyclers, data acquisition systems, voltage/current/resistance measurement devices, ect. Experience performing data analysis of test results to optimize test scripts and automate analysis of test results You Might Also Have: Master's degree in Electrical/Mechatronics Engineering or similar technical field Experience designing, building, and delivering internally developed electrical test equipment Location: Burlingame, CA Common Travel Locations: Greenville, SC; Vendor Sites Travel: up to 20% Compensation: $160,000 - $195,000 Proterra is an Equal Employment Opportunity Employer, providing equal employment opportunities to all Employees and applicants for employment without regard to race, color, creed, religion, sex, sexual orientation, gender identity, national origin, disability, age, genetic information, veteran status, pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation or any other characteristic protected by applicable federal, state, or local law or ordinance. Proterra participates in the Electronic Employment Verification Program (E-Verify). #LI-BJ1

Figure is an AI robotics company developing autonomous general-purpose humanoid robots. The goal of the company is to ship humanoid robots with human level intelligence. Its robots are engineered to perform a variety of tasks in the home and commercial markets. Figure is headquartered in San Jose, CA. We are looking for a Manufacturing Test Engineer to own PCBA-level test development and validation across all our custom electronics. In this role, you will be responsible for designing, deploying, and validating ICT (In-Circuit Test), FCT (Functional Circuit Test), and end-of-line diagnostics for our board builds - from prototype through mass production. This role is highly hands-on and requires regular travel to overseas contract manufacturers (CMs). You will work closely with electrical engineering, firmware, and manufacturing teams to ensure all test systems are robust, scalable, and capable of identifying issues before boards ever reach final assembly. Responsibilities: Own test coverage strategy for all custom PCBAs across the product Design, validate, and deploy bed-of-nails ICT and FCT test fixtures, working directly with overseas test vendors and fixture houses Collaborate with electrical and firmware teams to define test hooks, firmware test modes, and diagnostics coverage Specify and validate test software, including automated test sequencing, result logging, and failure triage Serve as the test lead on-site at CMs during NPI builds to bring up, debug, and improve test coverage and throughput Monitor test yield data, drive root cause analysis for failures, and recommend corrective actions Act as the first line of defense when boards or testers start failing Ensure test processes scale from EVT through MP, with clear handoff documentation and ongoing vendor support Requirements: 5+ years of experience in PCBA manufacturing test, ideally with high-complexity boards and tight timelines Hands-on experience with ICT and FCT system design, bed-of-nails fixture development, and board-level debug Strong understanding of DFT (Design for Testability) and how to collaborate with EE/FW teams early in the design cycle Experience working directly with overseas CMs and test vendors Familiarity with test automation frameworks, data collection, and reporting tools Able to read schematics, probe/debug hardware, and communicate clearly across disciplines Strong proficiency in writing Python for interfacing with real hardware Willingness to travel overseas 40% of the time Bonus Qualifications: Bachelor or graduate degree in Electrical Engineering or related field. Experience with Altium. CAD experience (EPLAN, Solidworks Electrical, CATIA, etc) Embedded programming of DSPs, microcontrollers, and FPGAs. Robotics or other high tech industry experience. The US base salary range for this full-time position is between $160,000 and $250,000 annually. The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended.

Kennedy Jenks is seeking a Drinking Water Process Engineer to provide technical expertise and support for drinking water treatment projects. The ideal candidate will have experience in drinking water treatment technologies and regulations, with a strong interest in continuing to develop their skills in water treatment. This role offers opportunities to work alongside experienced engineers and support clients on a variety of water quality and treatment projects. Key Responsibilities: Provide technical support for drinking water treatment projects, including treatment process evaluation, process selection, and operations optimization. Assist in preliminary engineering studies and feasibility assessments for municipal drinking water treatment systems. Support project teams with design and technical contributions, including developing process flow diagrams and design criteria for water treatment facilities. Collaborate with client service managers by contributing technical insights during project meetings and presentations. Participate in research and process improvements related to water quality and treatment technologies. Provide input on water treatment facility performance evaluations and assist in operations optimization. Stay engaged in water-focused professional organizations and present technical material at conferences. Qualifications: Bachelor's or Master's degree in civil / environmental engineering, or related scientific discipline required. 7+ years of experience in drinking water treatment engineering Practical professional engineer (PE) license or ability to obtain licensure within one year of hire. License in one or multiple states (CA, CO, FL, HI, OR, TX, VA, WA) preferred. Strong familiarity with drinking water treatment regulations and technologies. Ability to work as part of a project team, supporting senior staff and contributing to technical deliverables. Strong communication skills and ability to convey technical information clearly to colleagues and clients. Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. The salary range for this position is anticipated to be $110,000 to $140,000, and may vary based upon education, experience, qualifications, licensure/certifications and geographic location. This position is eligible for performance and incentive compensation. #LI-Hybrid

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 Every successful engineering career needs a solid foundation, and thats exactly what youll get. Do your job right, and youll build structures that will last for years to comeand a career that will take you wherever you want to go. ELECTRICIANS MATE Whether youre installing the latest electrical panels in the cockpit or troubleshooting the electric breakers on a submarine, you are responsible for keeping the power flowing. If youre fascinated by complex circuits and schematics, a career as an EM might be your perfect match. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Potential to earn a bonus upon enlistment Free health insurance Free housing A retirement plan Paid training College credit EDUCATION OPPORTUNITIES Navy College Program and Tuition Assistance Post-9/11 GI Bill, up to 100% tuition Professional credentials and certifications College credit hours toward a bachelors or associate degree through the American Council on Education QUALIFICATIONS AND REQUIREMENTS U.S. citizen or equivalent High school graduate or equivalent 17 years of age or older General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Youll construct and repair a variety of structures in just about every environment imaginable. You may work at Navy bases or ports of call around the globe, and you may be deployed to help develop or rebuild areas affected by natural disasters. PART-TIME OPPORTUNITIES Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Sailors in the Navy Reserve typically work at a location close to their homes. Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors. RequiredPreferredJob Industries Government & Military RequiredPreferredJob Industries Government & Military RequiredPreferredJob Industries Government & Military RequiredPreferredJob Industries Government & Military

Package - > $200 - 250k Cash + Benefits A scaling, SOTA Generative AI Startup operating with a world class team (Founders have multiple prior exits) with talent from Open AI, IBM, MIT and several top orgs, focused on pioneering work and advancements in large language models (LLMs), code generation, and code translation. Their projects directly involve industry leading partners where they're applying advanced AI to solve meaningful, practical challenges with real-world impact. Broad Responsibilities: Build and maintain robust distributed training systems using PyTorch and JAX Build and train production-ready reinforcement learning infrastructure Develop orchestration tools that manage complex workflows across large-scale AI model training and evaluation. Drive innovation by researching and developing scalable reinforcement learning (RL) algorithms and training paradigms for complex, high-dimensional optimization and decision-making tasks, including recent advancements in RL for feedback-driven optimization in LLMs. Design and train large-scale RL environments for optimization problems spanning multiple industries. Engage with frontier research through open-source projects and potential publications. Requirements: 2+ years of experience in distributed or decentralized RL (multi-agent preferred) using PyTorch and JAX. Research experience with RL for high-dimensional optimization problems, particularly in multi-agent reinforcement learning settings. Experience implementing advanced RL techniques such as task decomposition, hierarchical RL, goal-conditioned RL, or human-AI collaboration. Experience deploying and managing multi-GPU training infrastructure at scale. Eligible for TS/SCI clearance. Get in touch today for more details and immediate consideration / interview!

Do you want to shape the future of technology and multimedia? Apple's Multimedia Engineering team is looking for a video standards engineer who will represent the voice of Apple Multimedia in standards bodies around the world. In this role, you will join a small team that is responsible for Apple's engagement with several standards developing organizations including Alliance for Open Media (AOM), ITU, MPEG, 3GPP, and others. You will investigate and develop new media technologies collaborate with other teams within Apple in such development and then engage with these organizations for their standardization. As a video standards engineer, you will be a member of a team that represents Apple in the international standards' community. In this role you will be providing a clear position on our analysis of ongoing standards, refining and commenting on work in progress, proposing and driving to completion Apples initiatives and in general, steering the work to develop the field in line with Apple's vision and values. You may also represent Apple at standardization calls and meeting, integrating the feedback of the Apple community on the ongoing work and representing that at meetings. You will engage with various standards bodies, including the Alliance for Open Media, MPEG, 3GPP, ITU etc. and you will be involved in the development of new 2D and 3D multimedia standards. This position requires travel. Awareness of the interaction of intellectual property and standards. Curiosity and interest in new technologies and ideas especially pertaining to multimedia. Excellent judgement and integrity with the ability to make timely and sound decisions. Self-motivation and creative and critical thinking capabilities. Strong Collaboration Skills The ability to prioritize, drive and supervise initiatives. M.S. or higher in EE/CE/CS with a focus in software engineering and or signal processing Knowledgeable in video compression and the multimedia field in general, including 3D visual information coding. Good knowledge of the development of international standards, especially those pertaining to video/multimedia compression. Experienced in developing sophisticated video compression technologies such as MPEG-4 AVC, HEVC, VVC, or AOMedia's AV1 adn AV2 helpful. Track record of effective participation. Able to develop, analyze, propose and refine new algorithms and techniques; help develop Apples intellectual property position with inventions and filings. Experienced in key multimedia specifications from AOM, ISO, ITU, SMPTE, etc. Familiar with software development tools including Xcode, Git etc. Proficient in practical software development and able to contribute to large codebases e.g. of reference software (C, C++). Excellent writing, speaking, presentation and other interpersonal skills.