Advanced engineer jobs in Indianapolis, IN

At IPS, we are global leaders in developing innovative solutions for the consulting, architecture, engineering, project controls, procurement, construction management, and CQV of technically complex facilities, primarily in the life sciences industry. We are looking for a talented CQV Engineer II to join our team at our office located in _____________. In this role, you will perform cGMP compliance-based services (commissioning, qualification, validation, consulting, etc.) as developed and defined in project agreements with IPS clients. You will also follow IPS and client standards and requirements, overall good industry practices for C/Q/V services, and regulatory requirements. You may also perform standalone commissioning services for non-FDA-regulated clients. Additional Responsibilities Write C/Q/V documents following established standards and templates, including but not limited to the following: Commissioning Forms C/Q/V Protocols and Summary Reports Standard Operating Procedures Impact Assessments Specifications (URS/FRS/DDS) FATS/SATs Perform field/site activities including, but not limited to, the following: Attend and witness FATs and SATs as a representative of IPS clients. Execution of commissioning forms and witnessing of vendor start-up and testing. Execution of C/Q/V protocols. Walkdown and verification of system drawings (P&IDs, as-builts, etc.) Compile data and prepare reports for completed C/Q/V activities including ETOPs, protocol data packages, etc. Assist in deviation investigation and resolution of problems and issues encountered during field execution activities. Work with the Project Delivery department or CM for start-up and vendor testing. Witness and troubleshoot as required. Primary responsibilities include C/Q/V of equipment and systems, including CSV and automation, supporting pharmaceutical, biotech, and medical device industries. Read, understand, and utilize the IPS Best Practices and SOPs for the delivery of compliance services Perform work to meet IPS budget requirements and quality standards. Provide consistent, complete, and timely feedback and reports to IPS project leaders, project managers, or management, of project status and issues, as requested. Come join our dynamic team that creates world-class designs for our clients, and propel your career to new horizons! Qualifications & Requirements Bachelor of Science in Engineering. 2+ years of relevant work experience. This is an entry-level position. Experience in Pharmaceutical, Biotech, Medical Device Design, Construction, Commissioning, Validation, or QA. Preferred Qualifications Experience in writing and execution of PFC, FC, IQ, OQ, and PQ forms/protocols for GMP Utilities, Equipment, Systems, and Software. General exposure and experience in a GMP/Validation discipline with a knowledge and understanding of pharmaceutical Design/Build/Commission/Validation processes and how they relate to regulatory requirements and cGMP regulations within the E.U. and U.S. FDA. Context & Safety This position will have up to 100% travel to the site, or as required by the assigned project. You may be assigned to a client site for an extended period. Overnight travel or staying in the city of the client's location is possible depending on the assignment. Travel will be per the IPS Travel Policy, client-specific travel policy, or project-specific travel plan. You may visit active construction sites and will be required to take site safety training and adhere to site safety rules. This position is a safety-sensitive position. The employee is designated for field work and attends activities at client sites where they work in construction, process, packaging, manufacturing, research, or other "non-administrative" areas. All interviews are conducted either in person or virtually, with video required. About Us IPS, a Berkshire Hathaway company, is a global leader in technical consulting, architecture, engineering, procurement, construction management, commissioning, qualification, and validation services for technically complex facilities. Integration is how we think and work. It requires the ability to unite existing and emerging technologies into a process that reliably delivers products and accelerates speed to market. That end-to-end mindset allows us to be agile and anticipate challenges as we move projects toward operational readiness. IPS applies design and delivery expertise, client-side experience, and supplier-side insight to every project. We infuse our curiosity, our passion, and our commitment to partnership in delivering solutions at any scale. We meet our clients where they are and get them to where they need to go. That's only possible when we care as much as our clients do. Specialties Process Architecture, Process Design, Engineering, Construction, Commissioning, Qualification, LEAN Project Delivery, Strategic Master Planning, Energy Conservation Management, Project Controls, Program/Project Management, Operations/Logistics Strategy and Planning, EPCMV, and Staffing Services. All qualified applicants will receive consideration for employment at IPS without regard to race; creed; color; religion; national origin; sex; age; disability; sexual orientation; gender identity or expression; genetic predisposition or carrier status; veteran, marital, or citizenship status; or any other status protected by law. IPS is proud to be an affirmative action and equal opportunity employer. Connect With Us! If you do not meet the qualifications for this specific role, but would like to submit your resume for general consideration, please click here!

Job Title: DevOps Support Engineer (Service Reliability Engineer) Industry: Pharmaceutical JOB DESCRIPTION: Theoris is seeking a Service Reliability Engineer (SRE) Consultant to provide day-to-day support, monitoring, troubleshooting, and issue resolution for the MD3 infrastructure. The consultant will work alongside and under the technical direction of client staff, focusing on ensuring the reliability and performance of enterprise vendor applications hosted in AWS and a proprietary Kubernetes platform. The ideal candidate is proactive, self-sufficient, and comfortable working in an ambiguous environment. This role requires collaborating with vendors, driving deployments, and contributing to ongoing support as applications move through deployment cycles and into production. RESPONSIBILTIES: Continuously monitor the health and performance of the MD3 infrastructure, including data observations, HPC, and LiveDesign tasks. Utilize monitoring tools such as ServiceNow, Splunk, and Grafana to detect and respond to incidents in real-time. Perform regular job queue checks and maintenance activities. Monitor the MD3 dashboard and community chats/channels for issues or alerts. Diagnose, troubleshoot, and resolve technical issues related to the MD3 infrastructure. Collaborate with DevOps engineers and technical teams to resolve incidents. Document and communicate root cause analyses and resolution steps. Develop and implement automation scripts to streamline monitoring and troubleshooting. Identify areas for improvement in the infrastructure and propose solutions to enhance reliability. Participate in post-incident reviews to address monitoring and support gaps. Work closely with the DevOps team to align with business goals and research needs. Provide updates on incidents and resolutions to stakeholders. Participate in regular standups and scrums to discuss ongoing issues. Build and share bi-weekly reports on MD3 infrastructure status and performance. Develop and maintain knowledge articles for the help desk (ServiceNow) and user FAQs. Ensure documentation is up-to-date and easily accessible for the support team and end-users. Establish SLAs based on current ITSM practices for incident and problem resolution. Ensure all incidents and problems are addressed within defined SLAs. Performance Optimization: Fine-tune applications and infrastructure to meet performance benchmarks. Capacity Planning: Anticipate growth needs to scale infrastructure and optimize resource utilization. Create and maintain runbooks for critical alerts. REQUIREMENTS: Experience working with AWS-hosted vendor applications and Kubernetes platforms. Strong background in monitoring, troubleshooting, and supporting cloud-based infrastructures. Proficiency with monitoring tools such as ServiceNow, Splunk, and Grafana. Experience collaborating with DevOps engineers and technical teams. Ability to develop automation scripts to improve support workflows. Excellent communication and collaboration skills. Self-sufficient, proactive, and comfortable in ambiguous environments. Experience working in agile environments and participating in standups and scrums. Experience working with enterprise vendor applications and customized deployments. Background in performance tuning and capacity planning. Familiarity with help desk knowledge management and incident response SLAs. About Theoris: Our goal is to Fuel Your Career! As a Theoris team member, you join a culture based on people-centered values and an environment that fosters both personal and professional growth. We build long-term relationships with our clients and our consultants. With over 30 years of building strong relationships in the industry, we're uniquely positioned to make the right connections. This knowledge is used to find the right job placement. Our recruiting teams are experts dedicated to the information technology and engineering staffing space and are highly respected by our client base. Best-In-Class-Benefits We are in the people business; treating people right is our ONLY priority. Theoris Services consultants are full-time employees with full benefits, including: Robust Health Insurance 401(k) plan PTO accrual Paid holidays Excellent cash-based referral program

Operations Engineer - Pharmaceutical Manufacturing | Noblesville, IN Day Shift | Mon-Fri Onsite | Direct Hire | Full Benefits Day 1 We're representing a global manufacturer in the pharmaceutical industry that's experiencing significant growth and facility expansion. This new Operations Engineer role is ideal for someone who thrives at the intersection of manufacturing, quality, and engineering. You'll take ownership of quality events, root cause investigations, and process reliability improvements, ensuring consistent production performance in a regulated environment. What You'll Do Lead investigations for deviations, non-conformances, and CAPAs Manage process and reliability improvement projects to reduce recurring issues Partner with Quality, Production, and Engineering to drive accountability and compliance Author and review SOPs, Batch Records, and Change Controls Support regulatory and internal audits Analyze production data to identify trends and improvement opportunities What We're Looking For Bachelor's degree in Engineering or Life Sciences (advanced degree a plus) 2+ years of experience in pharmaceutical or related manufacturing environment Strong understanding of cGMP and aseptic or cleanroom operations Experience with root cause analysis and problem-solving tools (5 Whys, Fishbone, etc.) Project management and technical documentation skills Lean/Six Sigma certification or exposure preferred Hands-on, team-oriented approach in a fast-paced setting Why You'll Love It Here Global stability with strong local growth and investment Mission-driven work with direct impact on patient health Collaborative, team-focused culture and real advancement potential Competitive compensation, full benefits Day 1, and generous paid time off Interested? Let's connect. This is an excellent opportunity to join a growing pharmaceutical operation and make an immediate impact on production reliability, quality, and overall process excellence.

Electrical Engineer, 1st shift Pay Type: Salaried Reports To: Engineer Manager NTN Driveshaft, a global leader in constant velocity technology for the automotive industry, is seeking a qualified Electrical Engineer for our Columbus, Indiana operations. Our Columbus facility employs approximately 1,800 team members, and customer demand for our products continues to grow rapidly. We manufacture Constant Velocity Joints (CVJs) for all major automotive manufacturers, including Honda, Ford, Toyota, GM, Chrysler, and many others. Why NTN?We offer career growth opportunities, a stable work environment, a comprehensive benefits package with industry-leading low employee contributions, 401(k) retirement plan, customizable additional benefits, PTO, holiday pay and more! ESSENTIAL DUTIES AND RESPONSIBILITIES: Determining the equipment control systems, data acquisition systems, vision systems, and the sequence of operations necessary to perform production and assembly operations. Develop new processes and equipment technology and implement projects for new product designs, enhance existing process technology, to improve quality and reduce manufacturing cost. Monitor, analyze and evaluate test data in conjunction with new process trials. Support product and application engineering with process-related issues. Prepare concise summaries/technical reports for project and process reviews. Review/establish process design guidelines. Evaluate electrical systems, products, components, and applications by designing and researching programs, applying knowledge of electricity and materials. Confirm system and program capabilities through testing methods. Develop electrical products by studying customer requirements, researching and testing manufacturing and assembly methods and materials. Develop and modify manufacturing processes by designing and modifying equipment for processing and assembling components, soliciting observations from operators. Assure product quality through testing finished products and system capabilities. Contribute to team effort by accomplishing related results as needed. Work Environment - Workday is split between the air conditioned manufacturing floor and the office. REQUIRED KNOWLEDGE, SKILLS, EDUCATION, AND ABILITIES: Bachelors or an Associate's degree in Electrical Engineering (or related field), or 7 to 10+ years equivalent work experience with machine control and data acquisition systems. Experience with PLC Systems and Programmable Logic Controllers (Allen Bradley, Omron, Mitsubishi) Vision (Keyence, Cognex). Robotics (Motoman, Fanuc), or similar is preferred. Experience troubleshooting electrical and mechanical systems. Must have working knowledge and skills in MS Office applications and Software (AutoCAD Electrical, Office, SQL) Excellent communication skills (verbal and written) and demonstrated computer skills is required.

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose Utilize engineering methods to engage in continuous improvement activities, while improving SQDCM (Safety, Quality, Cost, Delivery, Morale, Environment) characteristics. Key Accountabilities Root cause identification and countermeasure for complex problems Data analysis for identification of improvement activities Completion of studies (project/plant characteristic impacts) Work closely with other engineering groups to develop solution and implement countermeasures Manage projects (Mass production) Develop processes from drawing Work with production team to understand new processes Work with counterparts in other North American plants to understand change points Data analysis/trend identification Maintaining/achieving production targets (budgets/efficiency/quality/delivery) Qualifications/Experience/Skills Minimum Educational Qualifications: Bachelor's degree in engineering field or equivalent related experience Minimum Experience: Prefer intern or co-op experience (1-2 terms) or related work experience at two years Other Job-Specific Skills: Strong continuous improvement mindset; MS office; problem solving/decision making skills; project management capabilities Working Conditions Shift rotation when needed and weekend work when needed What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Job Title: Manufacturing Engineer Working Pattern: Full-time Working location: Indianapolis, IN Rolls-Royce is looking for a Manufacturing Engineer to provide technical support to operations and execute Manufacturing Engineering activities to develop, maintain and continuously improve manufacturing processes and/or methods of manufacture, which are capable of meeting and continuing to meet business and customer requirements for safety, quality, cost, deliver rate and lead time (SQCD). Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. Rolls-Royce has been recognized as the top employer in the Engineering & Manufacturing category on the prestigious Forbes Top Employers for Engineers list for 2025. This ranking highlights our commitment to innovation, employee development, and fostering a collaborative environment where engineers can thrive. Be part of a team that sets the industry standard and drives groundbreaking solutions. At Rolls-Royce, we are committed to creating a workplace where all employees feel respected, supported, and empowered to do their best work. We foster a welcoming and innovative work environment that invests in you, giving you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. Rolls-Royce is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any protected characteristics. What you will be doing With this attractive opportunity you will get a chance to: HSE - Ensure that manufacturing processes are in full compliance to Health, Safety & Environmental Standards and meet the expectations of the Zero Harm program. Product Safety - Ensure that manufacturing processes are capable of achieving and sustaining the design intent, and that processes are followed so that our products and those of our suppliers conform to their specification. Rigorously raise, investigate and resolve safety related issues. Quality - Drive a culture of zero defects within the organization. Works with all functions to reduce risk and drive product Right First Time. Ensure compliance to all relevant company, legislative and technical policies and standards including RRMS, SABRe and Export Control and Intellectual Property requirements. Develop Capability - Develop, implement, validate, maintain and continuously improve manufacturing processes, digital systems and/or methods of manufacture which are capable of meeting and continue to meet requirements for safety, quality, cost, delivery rate and lead time. Capture, analyze and use data to demonstrate and improve the current and future capability of manufacturing processes. New Part Introduction from wax tooling through casting development. Utilizing PFMEAs, control plans, MSA activities in the manufacturing and/or assembly areas using HPC and Production systems concepts and as needed with yield enhancement and to incorporate Lean Manufacturing best practices and working in a culture focused on improvements. Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviors that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Basic Requirements: An Associates Degree in STEM or Mechanical Engineering, Metallurgical or Materials Engineer and 3+ years in a manufacturing environment or; A Bachelor`s Degree in STEM or Mechanical Engineering, Metallurgical or Materials Engineering with 1+ years experience in a manufacturing environment or; A Master's Degree in STEM or Mechanical Engineering, Metallurgical or Materials Engineering with manufacturing environment experience OR; PhD in STEM or Mechanical Engineering, Metallurgical or Materials Engineering. In order to be considered for this opportunity, you must be a US Citizen Preferred Requirements: General awareness of Manufacturing Systems and enabling software tools relevant to the business Understanding of Manufacturing Engineering processes relevant to their role Experience in aerospace investment casting and/or single crystal experience Experience working with investment casting manufacturing processes, materials, tolerances, equipment, or measurement system analysis Knowledge of investment casting processes including tool and die, wax and ceramic injection, rapid prototyping and familiarity with general casting finishing, GD&T, NDE inspection and dimensional processes. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Relocation assistance is available for this position. Posting to close: December 31, 2025 Global Grade 9 Job CategoryManufacturing Engineering Job Posting Date11 Dec 2025; 00:12 Pay Range$70,629 - $105,943-Annually Location: Indianapolis, IN Benefits Rolls-Royce provides a comprehensive and competitive Total Rewards package that includes base pay and a discretionary bonus plan. Eligible employees may have the opportunity to enroll in other benefits, including health, dental, vision, disability, life and accidental death & dismemberment insurance; a flexible spending account; a health savings account; a 401(k) retirement savings plan with a company match; Employee Assistance Program; Paid Time Off; certain paid holidays; paid parental and family care leave; tuition reimbursement; and a long-term incentive plan. The options available to an employee may vary depending on eligibility factors such as date of hire, employment type, and the applicability of collective bargaining agreements.

Since 1991, Collabera has been a leading provider of IT staffing solutions and services. We are known for providing the best staffing experience and taking great care of our clients and employees. Our client-centric model provides focus, commitment and a dedicated team to help our clients achieve their business objectives. For consultants and employees, we offer an enriching experience that promotes career growth and lifelong learning. The Collabera Way represents our fundamentals beliefs and is founded on the following building blocks: Company Snapshot Over 12,000 professionals in over 40 locations across 3 continents Top 10 U.S. IT Staffing Firm Largest minority-owned U.S. IT Staffing Firm Top supplier to Fortune 500 companies Staffing Industry Analysts' "Best Staffing Firms to Work For" recognition 4 years in a row Job Description Essential functions: 1. Ensure that the production and/or service of products are maintained at the rate and quality levels assigned as required by applicable quality system and regulatory requirements. 2. Review and approve changes made to products that may impact production or service lines. 3. Continually look for ways to reduce the cost of the manufacturing and/or service by implementing innovative solutions and streamlining processes. 4. Generate manufacturing and/or process instructions. 5. Analyze process metrics and institute changes to maintain quality levels. 6. Provide project management direction and/or project support as a member of a project team. 7. May develop, implement and maintain validation process plans. 8. May provide mechanical, pneumatic and electrical support for test fixtures and automated/semi-automated test systems. Qualifications Education required/ preferred: B.S. in a Technical field from an accredited four-year college or university or an equivalent combination of education and experience. Experience: 4-6 years of related experience with increased responsibility in Manufacturing and or service of electronic /electromechanical medical devices. Preferred Skills/Qualifications: Knowledge of medical device regulatory requirements. Experience with mechanical, electrical, electronics, software, and/or instrumentation technologies. Must have good troubleshooting and time management skills. Skills/Competencies: Excellent oral and written communication skills. MSWord, MS Project, Excel, and statistical software. Knowledge of product structures and manufacturing processes. Other Skills: Lean Manufacturing, Six Sigma, validation/qualification (IQ, OQ, PQ) experience, CAD skills, able to read technical drawing; ability to travel occasionally. Additional Information To discuss more about this job opportunity feel free to reach me. Sagar.rathore ************ ********************************

Major Tool & Machine (MTM) takes great pride in the talented people that come to work here. We offer market leading pay, benefits, optional 4/10 work schedule, quarterly bonus potential and a culture focused on employee engagement. Our work is essential to the world as we provide CNC machining, manual and robotic welding, engineering, program management, inspection, assembly and cleanroom services on a large scale projects to our customers in the Space, Defense, Energy, Nuclear, and Commercial Industries. Whether you are looking for a place to put your current strong skills to work in a more challenging, purpose filled environment, or you ultimately want long term professional growth and advancement opportunities, this could be the place for you. We are seeking a high caliber Process Engineer. In this role, you will prepare estimates and quote new jobs for RFQs and develop work order material and new manufacturing processes for new product launches, based on customer requirements. Duties: Complete estimates using VISUAL Manufacturing. Obtain material, subcontract and sublet quotations from materials department as necessary. Conduct contract review of technical requirements versus quotation and coordinate order acknowledgment with CFT Leader. Complete quality planning for projects. Maintain part hierarchy and drawing/revision number documentation. Provide technical support for manufacturing, material and subcontract/sublet contracting. Complete disposition, root cause analysis and corrective actions as necessary for non-conformances. Create fixture and process drawings as necessary Review and disposition Engineering Change Requests Conduct job release and post job review meetings. Participate in performance improvement activities with manufacturing personnel. Review Customer Change Requests, evaluate cost and delivery impact. Notify Sales and incorporate as necessary. Maintain electronic job folder. Requirements: Bachelor's Degree in Mechanical or Industrial Engineering, Mechanical Engineering Technology, or related field preferred. Prior Engineering experience developing new manufacturing processes for new product launches. The ideal candidate will have a strong background in machining, blueprint reading, and GD&T. 3D modeling experience preferred. Strong computer literacy, written and verbal communication, and project management skills are required. ABOUT US Major Tool & Machine (MTM) was founded in 1946, starting with only four employees to support the commercialization of the jet engine following World War II. Today, MTM is a contract manufacturer in Indianapolis, Indiana with a 600,000+ sq ft. manufacturing facility, 400+ skilled employees, best-in-industry business and quality systems, and project management expertise. Located for easy access on the east side of downtown Indianapolis, we are short commute away from most any place in the counties surrounding Indianapolis. Major Tool is a Precinmac company, a portfolio of businesses across the US and Canada that provide similar machining, fabrication and other manufacturing services to customers who provide critical services in turn in their various industries. Our Precinmac values are Trust, Gratitude, Action, Excellence and Growth, with a commitment to live these out daily in our workplaces. Benefits Excellent Benefits including three health insurance plan options - with a base plan option requiring ZERO employee paid premium. Dental and vision plans have very reasonable employee premiums. Participants in our health insurance have the onsite clinic available at no additional charge for medical services. All employees can access the mental health services provided in the clinic, For HDHP health insurance options, we contribute to your health savings account (HSA) and offer other flexible spending account (FSA) options. We support your retirement goals with a 401k company match. In addition to work schedule options we provide immediate Paid Time Off (PTO) availability and 10 paid Holidays, Along with in house training programs, we offer educational assistance for coursework that will support your career growth at Major Tool, We care about the health of our employees and provide a tobacco free facility, onsite fitness center and wellness events, short and long term disability and life insurance coverage fully paid. We are proud to be an Equal Opportunity Employer. We follow all applicable non-discrimination laws relating to employment, including candidates with disability or veteran status.

At Lilly, we unite caring with discovery to make life better for people around the world. We are a global healthcare leader headquartered in Indianapolis, Indiana. Our employees around the world work to discover and bring life-changing medicines to those who need them, improve the understanding and management of disease, and give back to our communities through philanthropy and volunteerism. We give our best effort to our work, and we put people first. We're looking for people who are determined to make life better for people around the world. The position is responsible for working with Contract Manufacturer(s) (CM) and Original Equipment Manufacturer (OEM) to support, supply, quality, and continuous process improvement of delivery devices, sub-assemblies, and components that are supplied to Lilly packaging and manufacturing sites. The Lead Engineer ensures that equipment is in-control, compliant, and capable of meeting customer needs, while also driving associated continuous improvement effort. Additionally, the Lead Process Engineer serves as the technical leader for the engineering team and leads project prioritization and strategic continuous improvement planning while also training and mentoring the CMO Process Engineers within their assigned scope of CMs. Key Objectives/ Deliverables: Obtain technical expertise of equipment and processes in area of responsibility. This includes clear understanding of equipment flow chart/process flow document, and critical process parameters for the process. Develop and provide training, technical oversight and mentorship to CMO process engineers. Provide program management support for CMO process engineers across multiple sites to evaluate reliability improvement projects, replicate across similar lines in the platform network and the shutdown management of those projects. Work with external companies and project teams to develop product and process improvements. Evaluate scope and business cases for proposed capital improvement projects. Lead prioritization of process and product changes necessary to maintain, sustain and improve the manufacturing process. Ensure Technical Stewardship projects to improve device design are prioritized within the Process Team agenda. Support/lead the resolution of escalated manufacturing related issues, including deviations, investigations and evaluation of manufacturing data and supply chain coordination issues. Utilize formal problem-solving techniques, including Root Cause Analysis, to resolve equipment issues. Support the timely completion of documentation and process updates resulting from local and global procedural changes, audits, complaint investigations, documentation reviews, product reviews, process reviews and equipment reviews. Develop effective and productive working relationships with colleagues at CM sites. Define and mitigate technical and patient risks, including use of FMEA Minimum Requirements: Minimum 3 years engineering experience in automated assembly equipment Root Cause Analysis, Investigation and Problem Solving skills Strong communication, teamwork, and networking skills Training, coaching and mentoring experience Proven ability to organize and prioritize multiple tasks Strong attention to detail Additional Preferences: Dry device assembly experience preferred Experience with DOE and statistical methods as applied to engineering studies and reports Experience in capital project delivery and project management scheduling and budgeting processes Experience working with 3rd party suppliers, specifically Original Equipment Manufacturers (OEM's) and Contract Manufacturers (CM's) Education Requirements: BS in an Engineering or Engineering related field Other Information: Ability to travel 25% on average with peak over 50% for a few months at a time Lilly is dedicated to helping individuals with disabilities to actively engage in the workforce, ensuring equal opportunities when vying for positions. If you require accommodation to submit a resume for a position at Lilly, please complete the accommodation request form (******************************************************** for further assistance. Please note this is for individuals to request an accommodation as part of the application process and any other correspondence will not receive a response. Lilly is proud to be an EEO Employer and does not discriminate on the basis of age, race, color, religion, gender identity, sex, gender expression, sexual orientation, genetic information, ancestry, national origin, protected veteran status, disability, or any other legally protected status. Our employee resource groups (ERGs) offer strong support networks for their members and are open to all employees. Our current groups include: Africa, Middle East, Central Asia Network, Black Employees at Lilly, Chinese Culture Network, Japanese International Leadership Network (JILN), Lilly India Network, Organization of Latinx at Lilly (OLA), PRIDE (LGBTQ+ Allies), Veterans Leadership Network (VLN), Women's Initiative for Leading at Lilly (WILL), en Able (for people with disabilities). Learn more about all of our groups. Actual compensation will depend on a candidate's education, experience, skills, and geographic location. The anticipated wage for this position is $64,500 - $167,200 Full-time equivalent employees also will be eligible for a company bonus (depending, in part, on company and individual performance). In addition, Lilly offers a comprehensive benefit program to eligible employees, including eligibility to participate in a company-sponsored 401(k); pension; vacation benefits; eligibility for medical, dental, vision and prescription drug benefits; flexible benefits (e.g., healthcare and/or dependent day care flexible spending accounts); life insurance and death benefits; certain time off and leave of absence benefits; and well-being benefits (e.g., employee assistance program, fitness benefits, and employee clubs and activities).Lilly reserves the right to amend, modify, or terminate its compensation and benefit programs in its sole discretion and Lilly's compensation practices and guidelines will apply regarding the details of any promotion or transfer of Lilly employees. #WeAreLilly

**What Commercial Technologies Software Engineering contributes to Cardinal Health** Commercial Technologies manages the enterprise's portfolio of commercial technologies to maximize the business value of the technologies and enhance the customer experience. This function creates strategies for the portfolio and innovative solutions based on relationships with business leaders, develops back-end solutions and capabilities, and improves the front-end experience. Commercial Technologies Software Engineering develops design options, process improvements and back-end solutions for commercial technologies to maximize performance and suitability for business needs. This job family manages engineering projects and plans for commercial technologies and interfaces with product managers to develop objectives. This job family assesses product systems, identifies opportunities for process and system improvements, and develops solutions through application of engineering principles. **Responsibilities** + Responsible for designing, developing, implementing, and supporting applications, systems and IT products required to achieve business objectives. + Plans and executes system implementations that ensure success and minimize risk of system outages or other negative production impacts. + Demonstrates problem solving ability that allows for effective and timely resolution of system issues including but not limited to production outages. + Analyze production system operations using tools such as monitoring, capacity analysis and outage root cause analysis to identify and drive change to ensure continuous improvement in system stability and performance. + Provide technical guidance to managed service partners. + Participate in code and design planning/reviews to ensure industry standards and best practices are being met + Establish and develop relations with business stakeholders + Design & customize technological systems and platforms to improve customer experience + Ensure aligned objectives and execution across internal and external stakeholders to create mutually beneficial partnerships to identify areas of growth and innovation + Advise on short and long term technology and growth planning + Ensure product and services are compliant with company's policies + Manage strategic partnerships with preferred technology vendors + Recommends new practices, processes, metrics, or models + Must be able to define tasks, milestones, and deliverables that meet stated project objectives + Independently determines method for completion of new projects + Serve as an escalation point for complex functional and technical issues + Provide end-to-end views on how all components fit together + "Connecting dots" across various business and technology areas **Qualifications** + 4-8 years of experience, preferred + Bachelor's degree in related field, or equivalent work experience, preferred + Experience in T-SQL, Windows Servers, .Net, Azure Logic Apps & pipelines, Swaggerhub, APIGEE, Splunk, Postman, Azure devops + Experience with GuardianRX, Cperx, Queen City, CMS Wordlink, Omnisys, and Genesis a PLUS + Experience in designing, building, deploying, managing, and enhancing applications within the Software Development Life Cycle (SDLC) processes including requirement analysis and system design, and/or software engineering principles + Experience with CI/CD pipelines such as Azure Dev Ops, GIT + Working experience translating business objectives into Strategic technology plans + Strong leadership skills, including the ability to effectively partner with business leadership and key business stakeholders. + Strategic mindset and ability to lead with business objectives + Strong understanding of infrastructure platforms such as operating systems, databases, application servers, cloud. + Strong understanding of industry trends and relevant emerging technologies + Strong problem solving and analytical skills, and the ability to communicate technical information to both technical and non-technical users across various domains. + Perspective on industry-wide best-practices + Experience in Healthcare industry a plus + Experience in data analytics and/or data science a plus + Enterprise or Solution Architecture experience a plus **What is expected of you and others at this level** + Applies comprehensive knowledge and a thorough understanding of concepts, principles, and technical capabilities to perform varied tasks and projects + May contribute to the development of policies and procedures + Works on complex projects of large scope + Develops technical solutions to a wide range of difficult problems + Solutions are innovative and consistent with organization objectives + Completes work; independently receives general guidance on new projects + Work reviewed for purpose of meeting objectives + May act as a mentor to less experienced colleagues **Anticipated salary range:** $93,500 - $140,280 **Bonus eligible:** No **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 10/30/2025 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

Applicants must be authorized to work in the U.S.; Sponsorship is not available for this position at this time.” Your Role on Our Team: The Manufacturing Engineer is responsible for providing production support as well as managing multiple moderate to highly complex projects. Individuals in this position will provide project management and necessary technical direction to assure successful and timely production concerns/issues resolved. You'll be DISRUPTIVE through these duties and responsibilities: Support production operations through troubleshooting problems, supporting maintenance, and ensuring equipment is in control. Work on continuous improvement projects to increase productivity, including any skills as related to project management and vendor relationships. Statistical process control to define problems and present quick applicable solutions to key stakeholders to implement change. Create and update operational method sheets (OMS) and related documentation and ensure they are current, accurate and understood by the team. Understanding of manufacturing quality systems and how to implement corrective actions and 8D's. Lead projects by working with cross functional resources to develop and implement new manufacturing processes and automated solutions for Service Operations Ability to conceptualize and work with integrators to develop solutions for manufacturing processes. Compile information and data to utilize in determining a business case for manufacturing operations. Responsible for the completion of assigned operations projects within budgetary and scheduling guidelines. Tracks project schedule to ensure adherence to timelines. Consistently visualizes entire scope of a project with minimal guidance. Identify project risks and implement risk reduction plans. Participate in Kaizen and project engineering within the facility. The TOOLS you'll bring with you: Bachelor of Science Degree in Mechanical or Industrial Engineering. Master's Degree preferred. Minimum 3+ years experience in manufacturing processes. Supervisory experience helpful. Proficient in Microsoft office platforms (Excel, PowerPoint, Word, PowerBI, etc) Proficient in Microsoft Visio/Lucid flow charts Proficient in AutoCad Ability to create Standard work, layered process audits, time observations/line balancing Experience successfully managing medium-high complexity projects Must possess a high level of Operations aptitude Excellent problem-identification and resolution skills Ability to work hands-on with the equipment if needed Statistical data analysis, risk analysis, flow layout and other related engineering tools Must have excellent verbal and written communication, organizational, time management and interpersonal skills. Must have high level of self-initiative and have proven “start-to-finish” project management skills. Computer knowledge and skills required. We provide these great perks and benefits: Robust health, dental and vision insurance plans Generous 401 (K) savings plan Education assistance On-site fitness center And many more, check out our benefits site HERE. Milwaukee Tool is an equal opportunity employer.

Job Description Aquinas Consulting is currently looking to fill a Senior Advanced Manufacturing Engineer job for a global leader in security technology. This highly visible role will lead manufacturing excellence initiatives, including automation, digital transformation, and Industry 4.0 implementations across worldwide operations. The ideal candidate will bring strong expertise in advanced manufacturing engineering, electronics testing, robotics, MES systems, and large-scale process optimization. This is a hybrid role based in the Indianapolis metro area with significant travel to support factory operations. Senior Advanced Manufacturing Engineer job responsibilities: Lead development and optimization of advanced manufacturing processes including fabrication, assembly, robotics, cobots, and electronic test platforms Support standardization and continuous improvement initiatives using Lean, Six Sigma, and TPM methodologies Drive digital transformation efforts including Industry 4.0 technologies, data analytics, automation, and MES platform integration (Ignition, Aveva, Rockwell, etc.) Lead deployment, troubleshooting, and optimization of robotic automation and electronic hardware validation systems Support communication protocols such as I2C, SPI, RS-232, USB, and CAN Support TPM initiatives to improve equipment reliability, reduce downtime, and extend asset life Partner with design, quality, operations, and procurement to evaluate and implement manufacturing technologies Lead facility start-ups, process transitions, capital equipment installations, and large-scale manufacturing projects Analyze MES and historian data to identify trends and drive continuous improvement Develop documentation, process specifications, and test strategies Provide technical support and training to production and maintenance teams on automation, electronics, MES, and process improvements Qualifications: Bachelor's or Associate Degree in Electrical, Mechanical, Mechatronics, Robotics, Industrial, Computer Engineering or related field 7+ years of advanced manufacturing, automation, or electronics testing experience Proven experience with Industry 4.0 technologies, digital transformation, smart manufacturing, and MES platforms (Ignition, Aveva, Rockwell, etc.) Hands-on experience with robotics, electronic hardware validation, and communication protocols (I2C, SPI, RS-232, USB, CAN) Exposure to TPM, reliability-centered maintenance, and continuous improvement methodologies Experience leading complex manufacturing projects, facility start-ups, troubleshooting, and process optimization Experience taking concepts from idea stage through execution Strong experience in automation, process digitization, and MES integration Proficiency with automation controllers, industrial networks, PLCs, embedded systems, and data historians Strong problem-solving, project management, and cross-functional collaboration skills Certifications in Lean, Six Sigma, TPM, or related areas are advantageous Experience implementing AI/ML (including computer vision) is a plus Ability to learn and apply Digital Twin and AI technologies for factory optimization and predictive maintenance If you are interested in this Senior Advanced Manufacturing Engineer job, please apply now to be connected with a member of our team. Please note: Applying to this role is an agreement to have your information entered into our database and acknowledgement that a recruiter will reach out to you either by phone, email, and/or text message regarding this and similar job opportunities. Aquinas Consulting is a woman and minority owned company headquartered in Milford, CT that provides Engineering, Information Technology (IT), and Manufacturing staffing solutions throughout the US. We take pride in 20 years of service to our clients, our hiring managers, our consultants, and our local community. Aquinas is an affirmative action, equal opportunity employer and committed to considering all qualified applications without regard to race, genetic information, sex, age, color, religion, national origin, veteran status, disability or any other characteristic protected by law. *************************

Working at Freudenberg: We will wow your world! Responsibilities: Analyze existing manufacturing and operational processes to identify areas for improvement. Design, develop, and implement process enhancements that improve quality, reduce waste, and increase throughput. Collaborate with cross-functional teams including Operations, Quality, Maintenance, and Engineering to drive continuous improvement initiatives. Develop and maintain process documentation including work instructions, process flow diagrams, and standard operating procedures. Monitor process performance using KPIs and data analytics; recommend corrective actions as needed. Support capital projects and equipment upgrades by providing process input and validation. Lead root cause analysis and problem-solving efforts for process-related issues. Ensure compliance with safety, environmental, and regulatory standards in all process changes. Train and mentor operations staff on new processes and improvements. Qualifications: Bachelor's degree in Engineering (Mechanical, Industrial, Chemical, or related field). 3+ years of experience in process engineering or manufacturing environment. Strong analytical and problem-solving skills. Proficiency in process mapping, Lean, Six Sigma, or other continuous improvement methodologies. Experience with data analysis tools and manufacturing software (e.g., ERP, MES). Excellent communication and collaboration skills. Ability to manage multiple projects and priorities in a fast-paced environment. Communication & Collaboration: Communicates clearly and concisely, while engaging proactively with colleagues at all levels of the organization. Value for Customers: Anticipates, understands and meets internal/external customers' needs and expectations. Develops solutions based on a customer centric approach. Innovation: Drives and supports innovative ideas, while taking informed risks to seek and develop new or improved solutions. Drive & Execution: Proactively identifies what needs to be done and takes action. Explores new ways and pursues new opportunities. The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Freudenberg-NOK General Partnership

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. The Manufacturing Engineer II position is located in Anderson, IN. This position participates in and contributes to process and product modifications, standards, and improvements. The Engineer II position utilizes knowledge of manufacturing equipment and processes to develop expertise in increasing product quality, output, and cost effectiveness. You will utilize lean tools and thinking in improving value streams, conduct workflow analysis, and lead process improvement and change within the organization. Qualified candidates must be able to work an on-site schedule at our Anderson, IN facility. Role Responsibilities: Apply lean manufacturing and Six Sigma tools to improve production methods, standards, tooling, procedures, equipment, plant layout, and product design. Conduct studies for process and product improvements, including cost reduction and quality enhancement. Drive process and product modifications in partnership with corporate design groups. Achieve annual cost reduction targets. Manage daily line issues related to equipment and production. Review and verify accuracy of procedures, bills of material, and route sheets. Initiate engineering change orders per established procedures. Lead engineering projects through all phases, including capital equipment specification, procurement, and installation. Participate in product development practices such as Accelerated Product Development (APD). Conduct failure mode and effects analyses to minimize product defects. Manage test programs to ensure products meet expectations and customer requirements. Develop and update operating instructions for standardized and safe equipment use. Comply with EHS and PPE policies and maintain a clean, organized work area. TRAVEL: Up to 5% Minimum Qualifications: Bachelor's degree in Engineering. Minimum 2 years of manufacturing engineering experience. Preferred Qualifications: Strong understanding of manufacturing processes. Demonstrated project management skills. Experience with metal fabrication, laser cutting, CNC machining, welding, and assembly processes. Leadership skills with ability to motivate and direct teams. Strong presentation and communication skills at all organizational levels. Filtration industry experience is a plus. Proficiency in 2D/3D CAD software. Familiarity with computer systems and manufacturing software, including Oracle ERP. Ability to work in a fast-paced, team-oriented environment with flexibility and adaptability. Relocation: This position is not eligible for relocation assistance. Immigration Sponsorship Not Available: Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.). Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. International relocation or remote work arrangements outside of the U.S. will not be considered. Key Words: Manufacturing, CNC, Welding, Assembly, CAD Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. **Job Posting External** **Job Duties** + Support current process technology and implement improvements to department/plant operations based upon manufacturing engineering analysis of existing operations compared to future requirements based on capacity, cost reduction, safety and/or risk avoidance opportunities. + Help to prepare project justification including recommendations, make-vs-buy analysis, layout, cost impact and schedule activities as required. Implementation of processes including equipment procurement, coordination of installation, process capability prove-out, training, process documentation, work standard measurement and production start-up. + Contribute to the product introduction process. + Review production problems as they are identified and implement solutions. Develop, implement and update documentation and training + Develop reports, project briefings and management presentations. Perform other duties as assigned. **Minimum Qualifications** + 8-15 years related experience + High School graduate or equivalent + Job requires employee to drive a personal vehicle to conduct company business < 20% per week (8 hours) and/or travel locally between company locations during scheduled workday. + Must demonstrate good communication skills amongst shop floor, support staff, and plant leadership. + Must be able to lead and execute small teams and projects. + Requires good organizational and interpersonal skills, and the ability to train others + Per 8-hour shift. Sit 8 hours and stand 0 hours. Typical office environment (low noise level, limited exposure hot/cold temperatures, dust, fumes, and vibrations). Regular interaction with others and performs a degree of independent work. Physical and mental demands are akin to the majority of office positions with prolonged periods of sitting and prolonged use of a computer/keyboard. Infrequent lifting, walking and climbing stairs. Occasional use of office equipment (copiers, printers, etc.). **Preferred Qualifications** + Certain technical skills and training such as CAD layout, geometric dimensioning and tolerance (GD&T), process capability theory and statistical process control (SPC) may be required. **Work Authorization:** Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. **Compensation and Benefits:** Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

Acuity Inc. (NYSE: AYI) is a market-leading industrial technology company. We use technology to solve problems in spaces, light and more things to come. Through our two business segments, Acuity Brands Lighting (ABL) and Acuity Intelligent Spaces (AIS), we design, manufacture, and bring to market products and services that make a valuable difference in people's lives. We achieve growth through the development of innovative new products and services, including lighting, lighting controls, building management solutions, and an audio, video and control platform. We focus on customer outcomes and drive growth and productivity to increase market share and deliver superior returns. We look to aggressively deploy capital to grow the business and to enter attractive new verticals. Acuity Inc. is based in Atlanta, Georgia, with operations across North America, Europe and Asia. The Company is powered by approximately 13,000 dedicated and talented associates. Visit us at ****************** Job Summary Be Approachable, Be Mindful of solutions, Be Energetic with your customers - Be A.M.E.! We're seeking talented and enthusiastic Senior Advanced Manufacturing Engineer with experience improving process integrity. The Senior Advanced Manufacturing Engineering position is a pivotal position with the priority of successfully evaluating new and existing processes and configuring manufacturing systems to reduce cost, improve sustainability, and develop best practices within processes throughout the supply chain. We invite you to

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose Ensure proper implementation of new or modified equipment. Support production equipment to sustain or improve department characteristics, applying electrical controls solutions. Key Accountabilities Provide technical support for department equipment to support mass production. Manage engineering projects to ensure that schedules and targets are achieved. Design and evaluate electrical control systems to drive department improvements. Lead and support the review of electrical designs, hardware and software. Ensure proper installation and modification of equipment to relevant electrical standards (NEC, NFPA, etc.) Lead/support electrical equipment troubleshooting to minimize downtime and maintain production targets. Lead or support Electrical and PLC troubleshooting to determine root cause and establish countermeasures. Effectively communicate and document project status, equipment changes, etc. Develop capability of colleagues and team through training, mentoring, and sharing of experiences in area of technical expertise and understanding for succession planning and to increase team workload capacity. Support departments initiatives as required Qualifications, Experience, and Skills BS in Electrical Engineering or 8 years relevant experience required 2-8 years' experience based on education Self-Motivated individual that works well with little supervision in addition to working well in a team environment Experience with Programmable Logic Controllers (PLC) Experience with Industrial networks (EIP, DeviceNet, etc…) Fluent in Microsoft Office Package Aptitude for and knowledge of electro-mechanical manufacturing systems Short- and long-term project management planning skills. Ability to lead projects and supervise contractors Good written and oral communication skills and ability to effectively present information at all levels within the company AutoCAD design drawing experience Desired but not Required KSAs: Robotics Experience; Machine Design Experience; Catia (or applicable 3D design software), Pneumatics. Working Conditions Primarily work in production office Work on production floor for installs and troubleshooting Ability to lift 20 lbs and operate vibrating hand tools Travel 3-4 times per year or as business needs require Work weekends and various shifts as needed Overtime 5-15 hours a week (depending on project) What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

At Lilly, we unite caring with discovery to make life better for people around the world. We are a global healthcare leader headquartered in Indianapolis, Indiana. Our employees around the world work to discover and bring life-changing medicines to those who need them, improve the understanding and management of disease, and give back to our communities through philanthropy and volunteerism. We give our best effort to our work, and we put people first. We're looking for people who are determined to make life better for people around the world. Provides technical oversight of the process equipment and is responsible for ensuring that the equipment remains in a qualified state in order to support the manufacture of bulk drug substance. Key Objectives/Deliverables: Process and Equipment Support: Equipment owner integrating process, process safety, environmental requirements and equipment knowledge. Monitor established equipment systems for process indicators to identify potential issues affecting production. Investigate and resolve equipment performance issues. Technical expert/support for installation and maintenance of process equipment and equipment improvements. Develop training / tools for operations to transfer knowledge of equipment capabilities and operational techniques to operations and maintenance. Improving the Business or Process: Identify/Implement improvement projects for capacity, product quality, raw material cost, emissions/waste loads, process variability and process safety. Perform and summarize improvement opportunities in technical reports Understand process/unit capacity constraints. Lead or participate in equipment/process qualification activities (including commissioning activities of new equipment or areas). Health, Safety and Environmental Management: May provide the technical leadership and problem solving skills for Health, Safety and Environmental incident investigations. Perform compliance related technical tasks such as emissions calculations, equipment evaluation, and application of material balances for env needs. Lead and/or participate in process hazard reviews and other process safety activities, main resource for process safety issues on supported processes. Adherence to Business Systems: Manage the implementation of countermeasures arising from deviations, spills, and safety related events. Manage the implementation of recommendations from PHRs and other audit findings. Maintain training compliance. Maintain and establish the equipment technical information for the process; Equipment procedures, P&IDs, Material of Construction Compatibility Index, Equipment information in PFDs, Aspen models, Material & Energy Balances, Process Safety Information Basic Requirements: Bachelor of Science Degree in Engineering 2+ years of pharmaceutical manufacturing (or equivalent), preferably in API Additional Preferences: Ability to apply fundamental engineering principles to process understanding, problem solving and process improvement. Ability to function in a team environment Effectively manage and prioritize competing priorities and to appropriately communicate verbally and in writing to various audiences. Available on call to address processing emergencies over the phone and at times return to the plant during off-hours. Experience with Change Management, Deviation Management, Periodic Reviews, Commissioning and Qualification, Routine Data Monitoring Ability to apply statistical thinking concepts to the analysis of manufacturing processes Visualize an operation/process and reflect it in a model Root cause analysis and the problem solving Process Hazard Identification/ Mitigation Skills Strong Computer skills in a variety of software packages (Batch Plus, JMP, Visio, PI Data Historian, MS Project, Excel) Experience with normal processing equipment/unit operations Other Information: This position serves an extended coverage night shift position: 3pm to 3am, 3 days on with 3 days off. Shift premium is included for this position. Situations may arise where off-schedule work, both on-site and off-site, will be required. This position works weekends and holidays per shift schedule. This position requires little to no travel. Tasks require entering manufacturing and laboratory areas, which require wearing appropriate PPE and the ability to access plant operating equipment including climbing of stairs and ladders. This position requires 24/7 availability via cell phone. Lilly is dedicated to helping individuals with disabilities to actively engage in the workforce, ensuring equal opportunities when vying for positions. If you require accommodation to submit a resume for a position at Lilly, please complete the accommodation request form (******************************************************** for further assistance. Please note this is for individuals to request an accommodation as part of the application process and any other correspondence will not receive a response. Lilly is proud to be an EEO Employer and does not discriminate on the basis of age, race, color, religion, gender identity, sex, gender expression, sexual orientation, genetic information, ancestry, national origin, protected veteran status, disability, or any other legally protected status. Our employee resource groups (ERGs) offer strong support networks for their members and are open to all employees. Our current groups include: Africa, Middle East, Central Asia Network, Black Employees at Lilly, Chinese Culture Network, Japanese International Leadership Network (JILN), Lilly India Network, Organization of Latinx at Lilly (OLA), PRIDE (LGBTQ+ Allies), Veterans Leadership Network (VLN), Women's Initiative for Leading at Lilly (WILL), en Able (for people with disabilities). Learn more about all of our groups. Actual compensation will depend on a candidate's education, experience, skills, and geographic location. The anticipated wage for this position is $66,000 - $149,600 Full-time equivalent employees also will be eligible for a company bonus (depending, in part, on company and individual performance). In addition, Lilly offers a comprehensive benefit program to eligible employees, including eligibility to participate in a company-sponsored 401(k); pension; vacation benefits; eligibility for medical, dental, vision and prescription drug benefits; flexible benefits (e.g., healthcare and/or dependent day care flexible spending accounts); life insurance and death benefits; certain time off and leave of absence benefits; and well-being benefits (e.g., employee assistance program, fitness benefits, and employee clubs and activities).Lilly reserves the right to amend, modify, or terminate its compensation and benefit programs in its sole discretion and Lilly's compensation practices and guidelines will apply regarding the details of any promotion or transfer of Lilly employees. #WeAreLilly

Applicants must be authorized to work in the U.S.; Sponsorship is not available for this position at this time." Your Role on Our Team: The Manufacturing Engineer is responsible for providing production support as well as managing multiple moderate to highly complex projects. Individuals in this position will provide project management and necessary technical direction to assure successful and timely production concerns/issues resolved. You'll be DISRUPTIVE through these duties and responsibilities: Support production operations through troubleshooting problems, supporting maintenance, and ensuring equipment is in control. Work on continuous improvement projects to increase productivity, including any skills as related to project management and vendor relationships. Statistical process control to define problems and present quick applicable solutions to key stakeholders to implement change. Create and update operational method sheets (OMS) and related documentation and ensure they are current, accurate and understood by the team. Understanding of manufacturing quality systems and how to implement corrective actions and 8D's. Lead projects by working with cross functional resources to develop and implement new manufacturing processes and automated solutions for Service Operations Ability to conceptualize and work with integrators to develop solutions for manufacturing processes. Compile information and data to utilize in determining a business case for manufacturing operations. Responsible for the completion of assigned operations projects within budgetary and scheduling guidelines. Tracks project schedule to ensure adherence to timelines. Consistently visualizes entire scope of a project with minimal guidance. Identify project risks and implement risk reduction plans. Participate in Kaizen and project engineering within the facility. The TOOLS you'll bring with you: Bachelor of Science Degree in Mechanical or Industrial Engineering. Master's Degree preferred. Minimum 3+ years experience in manufacturing processes. Supervisory experience helpful. Proficient in Microsoft office platforms (Excel, PowerPoint, Word, PowerBI, etc) Proficient in Microsoft Visio/Lucid flow charts Proficient in AutoCad Ability to create Standard work, layered process audits, time observations/line balancing Experience successfully managing medium-high complexity projects Must possess a high level of Operations aptitude Excellent problem-identification and resolution skills Ability to work hands-on with the equipment if needed Statistical data analysis, risk analysis, flow layout and other related engineering tools Must have excellent verbal and written communication, organizational, time management and interpersonal skills. Must have high level of self-initiative and have proven "start-to-finish" project management skills. Computer knowledge and skills required. We provide these great perks and benefits: Robust health, dental and vision insurance plans Generous 401 (K) savings plan Education assistance On-site fitness center And many more, check out our benefits site HERE. Milwaukee Tool is an equal opportunity employer.