Advanced engineer jobs in Los Angeles, CA - 1,376 jobs

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MANUFACTURING ENGINEER, SUPPLY CHAIN (FALCON & DRAGON) SpaceX demands a new type of supply chain. We require our suppliers to provide premium quality with rapidly evolving designs at increasingly ambitious volumes. We are actively looking for candidates who possess comprehensive knowledge of manufacturing and quality tools and have unrelenting motivation to enable suppliers to succeed. This position will support our Dragon and Falcon programs and requires a combination of proven leadership and technical capabilities. This is a highly technical position that requires practical experience in process engineering and new product development through to stabilized production for the machined components and assemblies used in rockets and rocket engines. The ideal candidate will have a broad understanding of the machining and assembly of metallic components and associated processes with the desire and capability to take on new challenges in unfamiliar areas to help enable our mission to Mars. RESPONSIBILITIES: Act as the technical point of contact for assigned parts, solving emergent challenges at suppliers and mitigating risk to the manifest by addressing high-impact manufacturing and quality challenges Review issues on assigned parts and solve to the root cause, implementing changes at the supplier, at SpaceX or both, as appropriate, drive further actions to closure, and re-source to new suppliers where appropriate Create and disposition issue tickets where needed, working with engineering counterparts to implement, but not limited to, required re-work, repair or use as-is disposition Become thoroughly familiar with your assigned parts and the processes that make up the overall assembly and become the primary point of contact for supply chain related defects on your parts Work with procurement to find exceptional suppliers and vet them appropriately for quality and ability to meet our aggressive takt times Conduct design for manufacturing (DFM) reviews to ensure parts are manufacturable at early stages, preferably prior to sourcing Own the new product introduction (NPI) process at a suppliers for new parts, drawing changes, or when re-sourcing existing parts to a new supplier Drive the production part approval process (PPAP) program to ensure stable supply, reduce inspection oversight and improve overall delivery time Demonstrate innovation, technical excellence, attention to detail, self-direction and courage Drive for results and customer satisfaction by collaborating with teams, leading projects and continuously driving improvement in the supply base BASIC QUALIFICATIONS: * Bachelor's degree in engineering discipline * 1+ years of experience with manufacturing and/or inspection of mechanical products in a production environment (including school projects, clubs, or internships) PREFERRED SKILLS AND EXPERIENCE: Master's degree in engineering Experience with machining and ancillary operations such as milling, turning, and tube cutting of materials Experience with interpreting engineering drawings and models; GD&T, etc. Broad familiarity of valves, motors, mechanisms, interconnects, solenoids, potentiometers, life support and thermal control systems is a plus Broad familiarity with TIG, MIG and orbital tube welding of stainless and carbon steels is a plus Knowledge of supplier quality processes (production part approval process, advanced product quality planning, first article inspection reports, etc.) Knowledge of statistical techniques and methods, e.g., design of experiments, Lean, Six Sigma, etc. Experience with quality systems (ISO 9000/TS/AS9100/NADCAP) and MRP/ERP systems Disciplined approach to problem solving - 8D Proficient in MS Office and Excel applications and report writing Proficient in SQL and PowerBI Experience with sharing information and influencing others across organizational lines, internally and externally ADDITIONAL REQUIREMENTS: Must be able to travel - up to 60-85% work week travel may be required, including international travel Must be able to work extended hours and/or weekends as needed to meet major milestones This position is based in Hawthorne, CA and requires being onsite - remote work not considered Valid driver's license mandatory COMPENSATION AND BENEFITS: Pay Range: Supply Chain Engineer/Level I: $95,000.00 - $115,000.00/per year Supply Chain Engineer/Level II: $110,000.00 - $130,000.00/per year Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees accrue paid sick leave pursuant to Company policy which satisfies or exceeds the accrual, carryover, and use requirements of the law. ITAR REQUIREMENTS: * To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to ************************.

Company: Counter Job Title: Packaging Engineer Reports To: Director of Sourcing and Director of New Product Launches About Us We are a startup revolutionizing beauty with a purpose; create the industry standard of “clean”. Our premium skincare, makeup, and body care formulations combine uncompromising safety, efficacy and environmental responsibility. And our vision transcends products. We are committed to inspiring confident women and others to recognize their collective power to create meaningful change. Our innovative community-commerce ecosystem connects customers, beauty enthusiasts, and loyalists, allowing each person to align with our brand in ways that authentically reflect their values and aspirations. From our formulas to our advocacy efforts to our community connection, we lead clean. The Role The Packaging Engineer will be responsible for developing, sourcing, and executing high-quality, cost-effective packaging solutions that meet brand, quality, and sustainability standards. This role partners closely with cross-functional teams, including Product Development, Operations, and Sourcing, to support new product launches and ongoing production needs. The Packaging Engineer will oversee component development, supplier management, and production readiness while driving process improvements to enhance efficiency and reduce costs. Key Responsibilities Packaging Development & Engineering • Translate creative design concepts into functional, manufacturable, and cost-effective packaging solutions • Collaborate with Design, Product Development, and Sourcing to ensure packaging aligns with brand standards, functionality, and cost objectives • Interpret and approve engineering documents, including die lines, material specifications, and technical drawings • Provide subject-matter expertise to ensure packaging feasibility and production readiness • Lead design reviews and recommend improvements to enhance sustainability, quality, and efficiency • Oversee tooling development, including status tracking, vendor coordination, and cost management Supplier Management & Sourcing • Lead supplier evaluations, RFQs, and cost of goods (COGs) analyses to ensure quality, value, and timely delivery • Build and maintain strong relationships with packaging vendors and contract manufacturers • Identify cost drivers and apply a total cost of ownership approach to decision-making • Manage packaging component orders and monitor supplier performance for cost, quality, and delivery • Conduct on-site visits for supplier assessments, color matching, and first production runs as needed Production Planning & Quality Assurance • Coordinate with suppliers and internal teams to ensure on-time delivery of packaging components for production and new product launches • Oversee packaging inventory levels to support production planning and business continuity • Support first production runs through on-site quality assurance and troubleshooting • Collaborate cross-functionally with Supply Chain, Planning, and Logistics to ensure readiness for on-time launches • Drive initiatives to reduce waste, streamline processes, and improve overall packaging sustainability Process Improvement & Cross-Functional Collaboration • Develop and implement best-in-class packaging development processes, documentation, and tools • Partner with Product Development, Regulatory, Planning, Finance, and Logistics to ensure seamless cross-functional alignment • Champion continuous improvement initiatives and contribute to operational excellence • Support packaging technology transfers and process standardization across product lines Qualifications Required • Bachelor's degree in Packaging Science, Industrial Design, Engineering, or a related field • 5-6+ years of experience in packaging development, preferably within the beauty, skincare, or consumer goods industry • Strong knowledge of packaging materials, manufacturing processes, and structural engineering principles • Proven experience conducting RFQs, COGs analyses, and managing supplier relationships • Excellent communication, organization, and project management skills • Advanced Excel proficiency and familiarity with ERP systems (e.g., NetSuite, SAP, Oracle) • Ability to work independently and collaboratively in a fast-paced, high-growth environment Preferred • Experience with sustainability initiatives and waste-reduction strategies • Knowledge of clean beauty standards and eco-conscious materials • Familiarity with PLM systems and technical documentation best practices • Willingness to travel for supplier meetings, production evaluations, and quality reviews Counter is a people-powered movement that starts with those behind it! We're building a team that reflects the diversity of the communities we serve, where every individual is respected, supported, and empowered to thrive. We know that different backgrounds, identities, and perspectives make us stronger, more creative, and better equipped to drive change. That's why we're committed to fostering an inclusive culture where everyone belongs. Counter is proud to be an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender/gender identity or expression, age, national origin, disability, veteran status, or any other legally protected status. We encourage all individuals to apply and join us in shaping a cleaner, more inclusive future for all.

A leading engineering consulting firm in Newport Beach is seeking a Senior Project Engineer with expertise in transportation and civil infrastructure. Ideal candidates have a Bachelor's degree in Civil Engineering, at least 4 years of relevant experience, and preferably a California P.E. license. The role involves leading technical delivery and mentoring junior staff while contributing to impactful public infrastructure projects. Competitive salary and comprehensive benefits are offered. #J-18808-Ljbffr

• Packaging support & testing: prepare and set up test requests for new materials/components; evaluate test reports; coordinate Greenpoint data requests. • Data & documentation: perform project data cleanup, maintain project files and LIMS/PLM inputs; ensure accurate documentation for transfers. • Sustainability & L4TF initiatives: support team efforts on sustainable materials, recyclability checks and L4TF data collection. • Project collaboration: follow up on action items, liaise with cross‑functional stakeholders (R&I, Supply Chain, Quality), and support implementation steps from concept to launch. • Supporting on diverse project work, including data gathering and follow-ups. • Assist in preparing and setting up test requests for new materials and components. • Perform data cleanup and organization for project documentation. • Coordinate requests for Greenpoint data and evaluate test reports to inform project decisions. • Contribute to L4TF initiatives, supporting sustainability efforts. • Gain real-time experience by actively participating in project development steps, from conception to implementation. Required: • Currently pursuing or recently completed degree in Packaging/Mechanical/Materials Engineering or equivalent. • Entry-level (0-1 year) technical support experience or academic project work. • Mandatory: Business-level English.

Strategic Imperative: This Principal Business Intelligence Engineer role is integral to Prodege's ability to make fast, confident, and data-driven decisions at scale. The Principal BI Engineer will architect and evolve our analytics and reporting foundation-ensuring business leaders, Product, and Data Science teams have trusted, performant, and scalable access to insights. This role bridges business strategy and engineering execution, enabling long-term growth across Performance Marketing, Insights Yield, and Consumer Experience. Prodege: A cutting-edge marketing and consumer insights platform, Prodege has charted a course of innovation in the evolving technology landscape by helping leading brands, marketers, and agencies uncover the answers to their business questions, acquire new customers, increase revenue, and drive brand loyalty & product adoption. Bolstered by a major investment by Great Hill Partners in Q4 2021 and strategic acquisitions of Pollfish, BitBurst & AdGate Media in 2022, Prodege looks forward to more growth and innovation to empower our partners to gather meaningful, rich insights and better market to their target audiences. As an organization, we go the extra mile to “Create Rewarding Moments” every day for our partners, consumers, and team. Come join us today! Primary Objectives: Architect and scale Prodege's BI and analytics platform for long-term performance and reliability Design high-quality analytics data models that power consistent and trusted reporting Enable fast, self-serve analytics without compromising governance or data integrity Partner with Product, Data Science, and business teams to translate needs into durable solutions Raise the bar on analytics engineering standards, tooling, and best practices Leverage AI-based development and analytics tooling to accelerate delivery and quality Qualifications - To perform this job successfully, an individual must be able to perform each job duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Detailed Job Duties: (typical monthly, weekly, daily tasks which support the primary objectives) Design, build, and maintain scalable BI and analytics architectures Develop and manage dbt models on Snowflake, ensuring performance, accuracy, and maintainability Write, optimize, and tune complex SQL queries for large-scale datasets Build and maintain dashboards, metrics, and semantic layers using Sigma Work closely with Product and Data Science to define metrics, KPIs, and reporting requirements Implement analytics engineering best practices (testing, version control, documentation, code reviews) Enable and support self-serve analytics while enforcing metric consistency and governance Leverage AI-powered tools to improve development velocity, validation, and documentation Mentor BI and analytics engineers and influence engineering standards across the organization What does SUCCESS look like? Success means that business and product leaders trust analytics as their single source of truth, supported by fast, reliable, and widely adopted dashboards that drive confident decision‑making. Analytics models scale seamlessly with the business, eliminating constant rework, while BI delivery speed improves without sacrificing quality or consistency. There is strong alignment across Product, Data Science, and Tech on analytics priorities, ensuring unified execution. As a result, self‑serve analytics adoption increases and ad‑hoc reporting meaningfully declines as teams become more empowered and data‑driven. The MUST Haves: ( ex: job cannot be done without these skills, education, experience, certifications, licenses ) 8+ years of experience in BI, Analytics Engineering, or Data Engineering Strong hands-on expertise with Snowflake, dbt, Sigma (or comparable BI tools with semantic modeling experience), and Advanced SQL optimization Experience building production-grade analytics solutions, not just ad-hoc reports Strong understanding of analytics architecture, data modeling, and performance tuning Proven ability to collaborate with Product, Data Science, and business stakeholders Experience using AI-based tooling to enhance analytics or developer productivity The Nice to Haves: (ex: preferred additional skills, education, experience, certifications, licenses ) Experience in ad tech, performance marketing, marketplaces, or consumer platforms Familiarity with streaming or near-real-time analytics architectures Experience enabling analytics governance and metric standardization at scale Mentorship or technical leadership experience Exposure to ML-driven analytics or experimentation platforms Prodege Benefits: Prodege offers a comprehensive benefits package to US Full-time employees including medical, dental, vision, STD, LTD and basic life insurance. Employees receive flexible PTO, as well as paid sick leave prorated based on hire date. US Employees have eight paid holidays throughout the calendar year. Employees receive an option to purchase shares of Company stock commensurate with their position, which vests over four years. Equal Employment Opportunity Statement At Prodege, we are committed to creating a diverse and inclusive environment. We are proud to be an Equal Opportunity Employer and do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, or any other characteristic protected by law. We encourage individuals of all backgrounds to apply. FCIHO Employers will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of FCIHO.

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years. ABOUT THE TEAM Anduril's Lattice software platform integrates together many sensors into a single cohesive view of the world, providing needed context for our users. AI Engineers on Anduril's Frontier AI team build edge-compatible, generative AI systems into the Lattice software platform to provide features and products that improve autonomy and reduce cognitive burden on the warfighter. Specific applications include but are not limited to automating mission planning, battle-space understanding, voice-control of assets, and enabling higher-levels of autonomy. WHAT YOU'LL DO Distill and fine-tune transformer architectures so they can be deployed onto edge devices or compute denied environments Propose and prototype LLM-based Agentic systems that help solve real world problems, leveraging the latest state-of-the-art techniques in the field Develop and maintain mission relevant benchmarks Work cross-functionally with different business lines across Anduril to help discover and scope new research problems REQUIRED QUALIFICATIONS BS in Computer Science, Machine Learning, Electrical Engineering, or related field 5+ years experience developing and benchmarking ML algorithms Experience pushing and maintaining ML algorithms in production Strong Python skills with experience in ML frameworks such as PyTorch Eligible to obtain and maintain an active U.S. Secret security clearance PREFERRED QUALIFICATIONS Experience fine-tuning transformer-based model Experience deploying deep-learning based models to edge devices or air gapped environments Prior experience in defense tech or start-up US Salary Range $220,000 - $292,000 USD The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: Healthcare Benefits US Roles: Comprehensive medical, dental, and vision plans at little to no cost to you. UK & AUS Roles: We cover full cost of medical insurance premiums for you and your dependents. IE Roles: We offer an annual contribution toward your private health insurance for you and your dependents. Additional Benefits Income Protection: Anduril covers life and disability insurance for all employees. Generous time off: Highly competitive PTO plans with a holiday hiatus in December. Caregiver & Wellness Leave is available to care for family members, bond with a new baby, or address your own medical needs. Family Planning & Parenting Support: Coverage for fertility treatments (e.g., IVF, preservation), adoption, and gestational carriers, along with resources to support you and your partner from planning to parenting. Mental Health Resources: Access free mental health resources 24/7, including therapy and life coaching. Additional work-life services, such as legal and financial support, are also available. Professional Development: Annual reimbursement for professional development. Commuter Benefits: Company-funded commuter benefits based on your region. Relocation Assistance: Available depending on role eligibility. Retirement Savings Plan US Roles: Traditional 401(k), Roth, and after-tax (mega backdoor Roth) options. UK & IE Roles: Pension plan with employer match. AUS Roles: Superannuation plan. The recruiter assigned to this role can share more information about the specific compensation and benefit details associated with this role during the hiring process. To view Anduril's candidate data privacy policy, please visit ********************************************** #J-18808-Ljbffr

Our client, a private label manufacturer in the CPG foods space, is seeking a Packaging Engineer to join their growing team. This role will involve leading packaging design and development, supporting sourcing and procurement efforts, and managing packaging testing protocols. Term: Full Time/Permanent Location: City of Industry (onsite) Compensation: $90k - $120k/year Desired Qualifications: 3+ years of experience in a packaging engineering-focused role Experience designing flexible and rigid packaging elements Experience with testing protocols (ISTA, ASTM, similar) Experience in the food/beverage industry is a big plus Degree in Packaging Engineering, or similar

Job Title: Manufacturing Test Engineer (Electrical) Engagement Type: 1-Year Contract (with possible extension) Pay Rate: $26-$32.00/hour Schedule: Monday-Friday | 100% Onsite | 6:00 AM-2:00 PM (PST) Position Overview We are seeking a Test Equipment Technician to support manufacturing and test engineering operations at our Costa Mesa facility. This is an immediate need role focused on the maintenance, troubleshooting, and repair of test fixtures and equipment in accordance with Schneider Electric test engineering and quality standards. The ideal candidate will have a strong electrical engineering background, hands-on test experience, and exposure to high-voltage systems. Key Responsibilities Perform detailed maintenance, troubleshooting, and repair of test fixtures and test equipment Ensure all test equipment is properly maintained, calibrated, and operational Collaborate closely with Test Engineers to diagnose issues and resolve equipment failures Execute preventive and corrective maintenance tasks to maximize equipment availability, efficiency, and effectiveness Support workflow scheduling and complete required administrative documentation Ensure assigned tasks are completed accurately and within established timelines Adhere to all quality, safety, and engineering procedures Perform other related duties as assigned Required Qualifications Associate degree (AA/AS) in Electrical Engineering or Electrical Technology and 4+ years of related experience OR Certificate from a recognized technical trade school (or advanced military technical training) plus 4+ years of related experience OR High School Diploma or GED (required) with equivalent hands-on technical experience Strong hands-on experience with test equipment and electrical systems Ability to use electronic test and measurement equipment, including DVMs and oscilloscopes, and accurately interpret results Proficiency with basic hand tools and soldering techniques Strong written and verbal communication skills in English Basic computer proficiency, including Microsoft Word and Excel Good color vision for identifying color-coded wiring and cabling Preferred Qualifications Experience working with high-voltage systems (up to 480V) Manufacturing or test environment experience Electrical Engineering (EE) background Top Skills Test Equipment Maintenance & Troubleshooting Electrical Engineering Fundamentals High-Voltage Testing (480V preferred) Test Fixtures & Manufacturing Test Systems

We are looking to bring on a senior-level Electrical Engineer to join a technical consulting team that works across a wide range of building types and industries. This role is ideal for someone who is confident in the field, strong in electrical fundamentals, and comfortable delivering clear, defensible engineering opinions to clients and legal teams. The work focuses on investigating electrical system failures and damage, determining cause and responsibility, and supporting complex matters that may involve insurance claims, disputes, or litigation. Assignments span commercial, industrial, infrastructure, municipal, and residential facilities. Responsibilities Perform on-site investigations of electrical systems and equipment to document existing conditions and damage following loss events such as fires, floods, storms, and equipment failures Analyze electrical components and systems to determine cause, origin, and contributing factors related to design, installation, construction practices, or product performance Apply applicable electrical and building codes to develop repair scope recommendations and support technical conclusions Review construction documents, drawings, specifications, and records to evaluate compliance with design intent and industry standards Provide electrical support to fire origin and cause investigations when electrical involvement is suspected Prepare clear, well-organized technical reports explaining findings, opinions, and recommendations Communicate regularly with clients, contractors, attorneys, and code officials to address technical issues and project needs Manage multiple active assignments while meeting schedules, budgets, and quality expectations Support the development and maintenance of client relationships Travel as required, sometimes on short notice Qualifications Bachelor of Science degree in Electrical Engineering from an ABET-accredited program Licensed Professional Engineer in California, with additional state licenses or the ability to obtain them preferred Minimum of seven years of electrical engineering experience, including design, field investigation, forensic work, or related technical roles Strong working knowledge of electrical and building codes including NEC, NFPA, and ICC standards Solid understanding of electrical systems, equipment, and construction practices across multiple facility types Hands-on field experience evaluating electrical systems and equipment in real-world conditions Experience estimating electrical repair or replacement scope is a plus Strong written and verbal communication skills, with the ability to explain technical issues to non-technical audiences Experience supporting litigation, including depositions, mediation, arbitration, or trial, is desirable Existing client relationships or business development experience is a strong advantage

Production Supervisor (Electronics and Fiber Optics) About the job Optical Zonu Corporation (OZC) is a privately held high-technology company headquartered in Los Angeles, CA. We specialize in designing and manufacturing fiber optic components for analog and digital transmission, as well as business-class services. OZC leads the industry in full-duplex, single-fiber, single-wavelength transceivers and RFoF links, leveraging strategic global partnerships with key vendors and suppliers to deliver cutting-edge solutions rapidly. Role Description This is a full-time, on-site role for a Production Supervisor. You will lead and motivate a team to ensure safe, efficient, and high-quality fabrication, assembly, programming, and testing of **fiber optic and RFoF products**, including patented solutions for aerospace and defense clients. Responsibilities include overseeing daily operations, optimizing workflows, troubleshooting issues, enforcing safety and quality standards, and collaborating with Engineering and Quality Assurance to meet production timelines. Key Responsibilities: Lead and mentor production teams in assembly, testing, and fiber optic operations; design and deliver targeted training programs, including specialized fiber splicing. Plan and schedule daily tasks; lead production review meetings to align priorities, enforce timelines, and optimize workflows. Partner with Quality Control on in-process inspections, first article approvals, and counterfeit prevention to ensure product specifications. Troubleshoot production and personnel issues in real time; conduct root cause analysis to eliminate recurring failures. Enforce safety protocols, ESD standards, and PPE compliance to maintain a zero-incident workplace. Maintain precise production records and deliver concise daily/weekly reports on output, yield, and progress. Collaborate with Engineering, QC, HR, and peer supervisors to streamline communication and resolve cross-departmental challenges. Drive continuous improvement through Lean initiatives, process enhancements, and Kaizen events. Minimum Qualifications: 4+ years leading teams in electronics manufacturing. Proven leadership, organizational, and coaching skills. Hands-on experience with Continuous Improvement and Lean Manufacturing. Proficiency in Microsoft Word, Excel, PowerPoint, and Outlook. Familiarity with manufacturing MRP systems. Collaborative track record with cross-functional teams. Legally authorized to work in the U.S. (verification required; no visa sponsorship). Preferred Qualifications: Bachelor's degree in manufacturing, engineering or technical field. Experience in fiber optics manufacturing. Certified Fiber Optic Technician certification by FOA. Lean Six Sigma certification. · Understanding and experience working with root cause problem-solving methodologies. OSHA standards certification. Proficiency in Microsoft Access or Project. Benefits/Salary: Competitive salary: $80,000 - $110,000 Comprehensive health insurance (medical, dental, vision) Excellent 401(k) with company match Manufacturing Engineer (Electronics and Fiber Optics) About the job Company Description Optical Zonu Corporation (OZC) is a privately held high-technology company headquartered in Los Angeles, CA. We specialize in designing and manufacturing fiber optic components for analog and digital transmission, as well as business-class services. OZC leads the industry in full-duplex, single-fiber, single-wavelength transceivers and RFoF links, leveraging strategic global partnerships with key vendors and suppliers to deliver cutting-edge solutions rapidly. Role Description This is a full-time, on-site role for a Manufacturing Engineer. You will oversee the production of high-quality **fiber optic and RFoF products** for aerospace, defense, and commercial industries. Your focus is to ensure operational excellence through real-time troubleshooting, Lean improvements, and rigorous quality standards. Working cross-functionally, you will drive production efficiency to meet technical specifications and demanding delivery timelines. Key Responsibilities: Serve as the primary technical bridge between Engineering and the production organization to ensure seamless New Product Introduction (NPI) and design-for-manufacturability. Enhance manufacturing efficiency by optimizing workflows, space utilization, and equipment layouts to reduce lead times and labor costs. Develop and maintain technical documentation, including Bills of Materials (BOM), standard operating procedures (SOPs), work instructions, and maintenance plans. Drive continuous improvement by leading Lean initiatives, Kaizen events, and cost-reduction projects to optimize product flow. Troubleshoot production issues in real-time, perform root cause analysis (RCA) and implement corrective actions to eliminate recurring failures and non-conformances. Partner with Quality Control to oversee in-process inspections, first-article approvals, and compliance monitoring to ensure all products meet specifications. Collaborate with Supply Chain to bring up new production lines, support sourcing activities, and resolve technical challenges with external suppliers. Conduct comprehensive reviews of engineering drawings, industry standards, and releasable documents to ensure accuracy and regulatory compliance. Facilitate cross-departmental communication between Engineering, QC, and Production Supervisors to streamline operations and resolve manufacturing bottlenecks. Minimum Qualifications: 4+ years of experience in manufacturing or production engineering, specifically within electronics, electro-mechanical, aerospace, or related industries. Proven ability to read and interpret drawings, schematics, wire harness documentation, and assembly diagrams. Strong technical writing skills with experience developing detailed manufacturing work instructions and test procedures. Hands-on experience with Lean Manufacturing and Continuous Improvement methodologies to optimize production techniques and reduce costs. Demonstrated track record of collaborating with cross-functional teams to troubleshoot manufacturing issues and implement innovative solutions. Familiarity with manufacturing MRP systems. Proficiency in Microsoft Word, Excel, PowerPoint, and Outlook. Excellent written and verbal communication skills with the interpersonal ability to work effectively across departments. Legally authorized to work in the U.S. (verification required; no visa sponsorship). Preferred Qualifications: Bachelor's degree in manufacturing, engineering or technical field. Experience in fiber optics manufacturing. Certified Fiber Optic Technician certification by FOA. Lean Six Sigma certification. Proficiency in Microsoft Access or Project. Benefits/Salary: Competitive salary: $80,000 - $120,000 Comprehensive health insurance (medical, dental, vision) Excellent 401(k) with company match

The **Manufacturing Engineer III** designs and operates the manufacturing systems for AeroVironment's Unmanned Air Vehicles. In this role, the Manufacturing Engineer chooses the best technologies and processes for manufacturing, planning and designing the factory as well as managing the maintenance & continuous improvement of the manufacturing process. One has strong knowledge in manufacturing production processes, specifically creating and monitoring automated systems and new technology development. One defines, maintains, and supports manufacturing processes utilized in the manufacture of Small Unmanned Air Vehicles. **Position Responsibilities** + Creates and manages equipment specifications, equipment documentation for development, qualification and support of assembly and test equipment for production + Implement Lean Manufacturing principles and apply Six Sigma methodology to achieve continuous improvement in productivity, quality, and lead time + Generate Value Stream Maps to reduce cycle time, waste, variation, and low production yields + Works on Manufacturing Strategies and capacity models for new and current products, including estimation and maintenance of capital requisitions + Generates new and reviews existing work instructions, assembly procedures and supporting documentation controlling the manufacturing process + Cost estimating of new tooling and fixtures required to support production floor. Leads Make/Buy analysis on assemblies with cross-functional team + Performs Design for Manufacturing, cost, and reliability analysis on new products with the design engineering team + Works with suppliers and contract manufacturers to ensure receipt of conforming parts and assemblies + Works on problems of diverse scope where analysis of data requires evaluation of identifiable factors + Other duties as assigned **Basic Qualifications (Required Skills & Experience)** + Bachelor's degree in Mechanical, Electrical or similar field is required or equivalent combination of education, training, and experience + Minimum of 5 - 8 years of experience in Manufacturing, Mechanical, Electrical, Test Engineering or similar field in Aerospace, Automotive, or Commercial industries + Experienced in Lean Manufacturing and Six Sigma Methodology is required + Experienced with electro-mechanical manufacturing, drawings, procedures and Bill of Materials is required + Experienced using Microsoft Office (Word, Excel, Outlook, Power Point, Access, Project), MiniTab, Oracle, Agile, and CAD programs (SolidWorks is preferred) + Occasional travel to supplier sites (up to 30%) **Other Qualifications & Desired Competencies** + Advanced degree is preferred + Specific experience with sheet metal fabrication, plastics, composite layups, printed circuit board assembly, mechanical assembly, calibration and testing processes is desired + Organization/planning, communication (oral and written), time management, conflict management, ability to manage stress, deadlines and work independently + Demonstrates competency as a problem solver who is familiar with root cause analysis techniques + Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties + Displays strong initiative and drive to accomplish goals and meet company objectives + Takes ownership and responsibility for current and past work products + Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company + Demonstrates effective time management, analytical, interpersonal and communication skills + Excels at teamwork, collaboration and putting the success of the team above one's own interests **Physical Demands** + Ability to work in an office and manufacturing environment (Constant) + Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) **Clearance Level** No Clearance The salary range for this role is: $89,630 - $127,050 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** U.S. Citizen, U.S. Permanent Resident (Green Card holder), asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3) or a person approved for an export license from the appropriate governing agency. **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

Kennedy Jenks is seeking a Drinking Water Process Engineer to join our team in California and contribute to projects focused on drinking water treatment, water reuse, and advanced water purification. This role offers the opportunity to work on both local and national projects, applying your technical expertise to complex water treatment challenges. Candidates at all stages of their career who are ready to take on increasing technical responsibility, contribute to innovative solutions, and collaborate with experienced engineers are encouraged to apply. Key Responsibilities Contribute technical expertise in municipal drinking water treatment, water reuse, and advanced water purification, including evaluating treatment processes, selecting appropriate methods, conducting engineering studies, and optimizing operations. Support project teams and client service managers in project pursuits, meetings, and technical discussions. Participate in feasibility studies, facility planning, and pilot testing for water treatment projects. Prepare technical deliverables, including basis of design reports, preliminary and detailed engineering drawings, specifications, process flow diagrams, and process instrumentation diagrams. Evaluate and optimize operations of existing water treatment facilities. Provide guidance and mentorship to less experienced engineers when appropriate, and collaborate with senior engineers on technical solutions. Stay current on industry standards, emerging technologies, and regulatory requirements. Qualifications BS or MS in Civil, Environmental, Chemical Engineering, or related discipline 5+ years of experience in drinking water treatment engineering, including process design, system optimization, or operational evaluation Engineer-in-Training (EIT) or Professional Engineer (PE) license; PE preferred or ability to obtain Strong technical, analytical, and problem-solving skills Ability to work collaboratively on multidisciplinary teams and communicate effectively with clients and project staff Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. Salary range for this position is expected to be between $120,000 and $210,000, and may vary based upon education, experience, qualifications, licensure/certifications, and geographic location. This position is eligible for performance and incentive compensation. Benefits Summary: Kennedy Jenks offers a comprehensive benefits package, including medical, dental, vision, life and disability insurance, 401k, bonus opportunities, tuition reimbursement, professional registration support, a competitive PTO and holiday plan, and other benefits and programs. #LI-hybrid

About Our Client: Accepting no less than the absolute best, our client has climbed to the top, gaining a reputation for both excellence and satisfaction. Working at this company will give you the opportunity to work with some of the top technical professionals in the industry who are bringing cutting-edge products to forefront. Offering results-driven people a place where they can truly make a difference on a daily basis, this is an opportunity you will not want to miss! Key Responsibilities: Recommending and implementing improvements to production processes, methods, and controls. Coordinating the manufacturing launch of new or revised products. Providing mentorship to team members to enhance their skills and performance. Leading projects related to tooling design and process development. Ensuring product and process quality by designing test methods, testing finished products, and performing process capability studies. Creating and approving product drawings and documentation to ensure accuracy and compliance. Establishing and performing verification and validation activities, including design verification testing, process validation, packaging validation, and shelf-life studies. Preparing product and process reports by collecting, analyzing, and summarizing test data. Evaluating and solving production problems to maintain efficiency and quality. Representing manufacturing in cross-functional meetings to facilitate collaboration. Ensuring new equipment and tooling meet process validation requirements according to established procedures. Targeting and implementing cost reduction initiatives to improve profitability. Training employees on current and new manufacturing processes to ensure compliance and skills development. Qualifications: Bachelor's degree in Engineering, Manufacturing, or a related field. Prior experience in manufacturing support roles in the medical device or healthcare industries. Relevant experience supporting process improvement and new product introductions. Proven ability to support manufacturing processes or projects. Strong understanding of process improvement, continuous improvement, and cost reduction initiatives. Experience in supporting NPI (New Product Introduction) and equipment/process launches. Proficiency with computer skills including Word, Excel, and SolidWorks Knowledge of medical devices, healthcare, or vascular device manufacturing. Familiarity with process development and equipment support. Experience with Vascular or Neurovascular product lines. NO C2C CANDIDATES Interested Candidates please apply on our website at https://jobs.jblresources.com. For more information about our services and great opportunities at JBL Resources, please visit our website: https://www.jblresources.com. JBL Resources is proud to have earned the reputation of being a premier provider of top talent professionals in the fields of engineering, human resources, logistics, operations, and supply chain management. As specialists in both permanent placement and contract services, our mission is to help companies and individuals become all they were created to be. **JBL is an Equal Opportunity Employer and E-Verify Company

Who we are: The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products. Under general supervision, manage specific projects/tasks associated with continuous improvement and/or production sustainment; perform experiments and tests; record experimental data; make calculations and prepare brief reports covering the work. This position will report to the Director of Business Development in support of UDRI. Responsibilities: Develop and/or improve processes for the manufacture of new or existing products. Work with cross-functional teams (primarily Quality and Production) in leading efforts in improving product quality and customer satisfaction. Conduct root cause analysis and implement countermeasures to prevent failure recurrence. Develop and implement concepts, including Lean Manufacturing, etc., to reduce manufacturing cost and increase process throughput. Create/manage manufacturing documentation, and provide technical oversight to bring high priority projects to a successful conclusion including training. Lead manufacturing trials supported by data analysis and recommend appropriate next steps. Work in a proactive manner to manage the technical direction of assigned manufacturing areas, in concert with the overall technical direction of the site. Plan and lead the incorporation of engineering flowdown requirements to ensure on time delivery. Expanded technical competency of processes, materials, and products. Increased capability in workload management. Other essential duties may be assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required Qualifications: B.S. degree in Engineering or Science (Chemical, Mechanical, Material Science, Aerospace, Manufacturing, or Industrial Engineering fields) 2 to 4 years working experience in a manufacturing or laboratory environment Excellent verbal and written communication skills Strong mechanical aptitude and hands on mentality Ability to adjust to continuously shifting priorities Proficient computer skills - Microsoft suite (Word, Excel, PowerPoint, Project) Comfortable working on and around equipment and using proper PPE Ability to adjust to continuously shifting priorities Experience with composite materials and/or material sciences a plus Programming experience a plus (VBA, C or C++, etc) CAD experience a plus (CATIA, Solidworks, AutoCAD, etc) SAP experience a plus Knowledge of Lean Manufacturing principles a plus Minitab software experience a plus ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee. The Gill Corporation is an Equal Opportunity Employer . Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department

Job DescriptionDescription: Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider providing component and system level solutions and structures. Our products and technologies have become integral parts of numerous mission-critical devices, including life-saving MRI and CT scanners, US Military applications, weather and telecommunication satellites, exploratory space missions, and much more. We are proud to be doing work that really makes a difference in our world- and beyond! Manufacturing Engineer - Satellite Structures As a Manufacturing Engineer specializing in Satellite Structures, you will lead project management activities while collaborating closely with customers and production teams to ensure program success. Our work environment demands a candidate with the ability to take on multiple responsibilities in a fast-paced environment. We are looking for team players who enjoy working with customers, vendors, and co-workers to provide the best service and solutions. The best candidates will be those who embrace new challenges, using critical thinking skills, and developing innovative solutions. Primary Responsibilities: Manage schedules, resources, and deliverables for complex composite manufacturing projects. Drive program execution from planning through delivery, ensuring alignment with customer requirements and budget. Support secondary activities in design, manufacturing, quality assurance, tooling, and materials as needed. Frequent customer communication/interaction Hands-on experience with design for manufacturability (DFM) and prototype hardware fabrication and testing is a plus! We offer an attractive and competitive compensation/benefits package, which includes a profit-sharing bonus plan. Our work environment is comfortable, collaborative, and stimulating. Apply now to get started on a career with ACT! If you are looking for an opportunity to start a career with a growing company doing exciting andimportant work, please apply today! ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. E-verify employer. Requirements: B.S. or M.S. degree in Mechanical Engineering or Aerospace Engineering. Knowledge of Advanced Fiber-Reinforced and/or Aluminum Honeycomb Composites and associated manufacturing methods. Ability to operate in a fast-paced environment and contribute immediately upon hire. Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee or asylee.)

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. MFG Systems Implementations Engineer I (Traveling Role) The MFG Systems Implementations Engineer I is responsible for collaborating with internal departments & external vendors to assist in commissioning manufacturing technologies throughout the Niagara network. Commissioning includes but not limited to being on-site to coordinate various activities from various stakeholders, report daily on progress updates, ensure all required assets have been procured, extensive system training & troubleshooting, and provide system support. Essential Functions Support commissioning of systems working with our internal/external stakeholders onsite and plant management teams. Training all end users, to include super users on functionality and process changes as they relate to new manufacturing technologies. Documenting requirements, process flows, new functionality, and creation of SOP/training materials while maintaining all materials in a central repository. Working with business to understand and document system requirements, test various integrations within applications, and update UAT scenarios to deliver and support business needs. Trouble shooting daily operational system issues to define root cause, working in collaboration with business partner to create temporary/permanent solutions. Ability to take direction, learn processes/systems quickly and apply to deliver results based on timeline. Recognize potential problems with existing equipment and develop solutions with the ability to adapt to various engineering designs, applications, and process criteria. Create dashboards and reports that present production data to plant staff and management. Perform data analysis using software tools to model and develop new understanding of manufacturing opportunities. Ability to work in fast paced, dynamic environment collaboratively with a cross-functional team and manage project implementations. Organize, schedule and run meetings to coordinate on-site commissioning's, identifying opportunities and system needs. Interacting with multiple departments including but not limited to IT, Planning, Logistics, Plant Production Teams, and external vendor. Documenting meeting minutes, action items, issues, and risks. Ability to plan, track, escalate, and deliver upon tasks and timelines assigned. Available for 24/7 support (scheduled and off hours). Excellent problem solver with the ability to keep many driving factors and requirements in focus. Monitor process, technology and provide insights into overall status. Strong communication and documentation skills, ability to communicate and interact at various levels of organization including Plant Directors. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. High Domestic Traveling Role 75%+ Qualifications Minimum Qualifications: 1+ Years - Experience in manufacturing field, prefer manufacturing technology experience such as MES/LMS/CMMS. 1+ Years - Experience in position 1+ Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 2 Years- Experience in manufacturing field, prefer manufacturing technology experience such as MES/LMS/CMMS. 2 Years - Experience in position. 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies Analyzing and developing solutions addressing customer needs. Experience in Business Analysis. Overall high degree of professionalism. Strong team-oriented interpersonal skills including facilitation and the ability to effectively interface and work with a wide variety of people. Must work independently. Strong analytical, problem-solving skills and critical thinking skills. Ability to manage multiple priorities and projects. Strong written and verbal communication skills including the ability to provide detail documentation of a technology incident. Proficient computer skills (i.e. Microsoft Office, Outlook). Excellent interpersonal, communications and analysis skills, planning and organizational proficiency and good business judgment. Ability to delivery effective and professional presentation to peers, management and other professionals within our field. Education Minimum Required: Bachelor's Degree in Manufacturing, Computer Science, Engineering, related field, or equivalent work experience Preferred: Master's Degree in Manufacturing, Computer Science, Engineering, related field, or equivalent work experience Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: Native or Bilingual Proficiency Typical Compensation Range Pay Rate Type: Salary$71,314.38 - $103,405.86 / Yearly Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MANUFACTURING ENGINEER, RAPTOR AVIONICS The Raptor Avionics team is responsible for the design, manufacturing and test of the all avionics installed on Raptor engines. This propulsion engineer role will be on a highly interdisciplinary team of engineers working to develop controls and sensing solutions that enable the reliable simultaneous operation of all the engines on starship. RESPONSIBILITIES: Build the line that builds the parts Develop and qualify manufacturing processes necessary for avionics production. Question requirements, delete parts and processes, simplify/optimize, accelerate, and automate Maintain a sense of holistic ownership over the production line, including process consistency, quality, tooling, capital equipment, ergonomics, and safety Create and maintain production work instructions, training documents and maintenance planning Oversee introduction and implementation of new products and product revisions, frequently multiple at a given time Interface with vendors, supply chain and internal teams for new product & change introduction Work with production teams to ensure the hardware you are responsible for is delivered on time or ahead of schedule Investigate failures, document findings and drive corrective actions BASIC QUALIFICATIONS: * Bachelor's degree in an engineering discipline * 1+ years of experience working within a manufacturing environment PREFERRED SKILLS AND EXPERIENCE: Advanced knowledge of various physical sensors and how they are operated, designed, and manufactured Experience with instrumentation and electronics packaging for harsh environments Experience in a high volume manufacturing environment Data analysis experience with Python, MATLAB, Minitab or other data analysis tools Experience with special processes such as wire bonding and laser welding Experience implementing utilizing statistical process control and tracking production line performance over time Ability and desire to work in a dynamic, fast-paced, team environment Excellent communication and teamwork skills ADDITIONAL REQUIREMENTS: This is a hands-on position that will require standing for long durations of your day and working directly with hardware on the floor Must be comfortable stooping, bending, and standing Position may require occasional travel, long hours, or weekend work COMPENSATION AND BENEFITS: Pay range: Propulsion Engineer/Level I: $95,000.00 - $115,000.00/per year Propulsion Engineer/Level II: $110,000.00 - $130,000.00/per year Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees accrue paid sick leave pursuant to Company policy which satisfies or exceeds the accrual, carryover, and use requirements of the law. ITAR REQUIREMENTS: * To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to ************************.

A defense technology company is seeking an AI Engineer to work on transformer architectures and develop advanced AI systems. This role involves cross-functional collaboration and the need for expertise in machine learning algorithms. Candidates should have a BS in a related field and Python skills. The company offers a competitive salary range of $220,000 - $292,000, along with comprehensive benefits including healthcare, income protection, and generous PTO. #J-18808-Ljbffr

Kennedy Jenks is seeking a Drinking Water Process Engineer to join our team in California and contribute to projects focused on drinking water treatment, water reuse, and advanced water purification. This role offers the opportunity to work on both local and national projects, applying your technical expertise to complex water treatment challenges. Candidates at all stages of their career who are ready to take on increasing technical responsibility, contribute to innovative solutions, and collaborate with experienced engineers are encouraged to apply. Key Responsibilities Contribute technical expertise in municipal drinking water treatment, water reuse, and advanced water purification, including evaluating treatment processes, selecting appropriate methods, conducting engineering studies, and optimizing operations. Support project teams and client service managers in project pursuits, meetings, and technical discussions. Participate in feasibility studies, facility planning, and pilot testing for water treatment projects. Prepare technical deliverables, including basis of design reports, preliminary and detailed engineering drawings, specifications, process flow diagrams, and process instrumentation diagrams. Evaluate and optimize operations of existing water treatment facilities. Provide guidance and mentorship to less experienced engineers when appropriate, and collaborate with senior engineers on technical solutions. Stay current on industry standards, emerging technologies, and regulatory requirements. Qualifications BS or MS in Civil, Environmental, Chemical Engineering, or related discipline 5+ years of experience in drinking water treatment engineering, including process design, system optimization, or operational evaluation Engineer-in-Training (EIT) or Professional Engineer (PE) license; PE preferred or ability to obtain Strong technical, analytical, and problem-solving skills Ability to work collaboratively on multidisciplinary teams and communicate effectively with clients and project staff Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. Salary range for this position is expected to be between $120,000 and $210,000, and may vary based upon education, experience, qualifications, licensure/certifications, and geographic location. This position is eligible for performance and incentive compensation. Benefits Summary: Kennedy Jenks offers a comprehensive benefits package, including medical, dental, vision, life and disability insurance, 401k, bonus opportunities, tuition reimbursement, professional registration support, a competitive PTO and holiday plan, and other benefits and programs. #LI-hybrid