Advanced engineer jobs in Saint Petersburg, FL - 247 jobs

Manufacturing Process Engineer - Electronics / CCA Production Clearance Requirements: None Contract to Hire Pay Rate:$35/hr We are seeking a hands-on Manufacturing Process Engineer to support the design, optimization, and continuous improvement of manufacturing processes for circuit card assemblies (CCA), electronic module builds, and cable harness production. This role involves collaborating with engineering, operations, quality, and production teams to enhance manufacturability, improve workflow efficiency, develop tooling, and ensure compliance with specifications and regulations. The ideal candidate understands electronic manufacturing processes, can interpret engineering drawings, and has experience designing production layouts or writing process documentation. This is an excellent opportunity for a technical professional who enjoys supporting the production floor, driving improvements, and delivering high?quality manufacturing solutions. Responsibilities: Design and improve manufacturing processes, procedures, and production layouts for CCAs, electronic modules, and subassemblies. Review and interpret engineering prints to develop accurate and efficient manufacturing processes. Collaborate with design engineering to drive production improvements and optimize manufacturability. Support day?to?day production floor activities in partnership with operations and quality teams. Design, procure, and implement tooling, fixtures, and manufacturing aids to support efficient assembly processes. Incorporate inspection and test requirements into production plans where applicable. Monitor performance of machinery, equipment, and tools; investigate deficiencies and recommend corrective actions. Ensure compliance with manufacturing standards, specifications, and regulatory requirements. Provide feedback to engineering regarding design concepts and specification improvements. Drive continuous improvement initiatives focusing on quality, throughput, and process efficiency. Perform physical tasks including climbing stairs and lifting up to 20 lbs. Shift Schedule: Monday - Thursday, 5:00 AM to 3:30 PM EST Required Skills/Education: Experience designing or improving manufacturing processes for circuit card assemblies (CCA) or electronic modules. Ability to read, interpret, and apply engineering drawings, schematics, and technical documentation. Hands-on experience supporting production floor operations and resolving process issues. Ability to design or modify tooling, fixtures, and assembly processes. Strong understanding of manufacturing standards, quality requirements, and compliance processes. Ability to read/write in English. Ability to climb stairs and lift up to 20 lbs. Preferred Skills: Cable harness experience (routing, assembly, documentation). Experience writing or updating manufacturing process documentation. Familiarity with CCA assembly processes including soldering, inspection, reflow, or AOI. Experience working in electronics manufacturing or defense/aerospace environments. Strong continuous improvement mindset with the ability to identify process gaps and drive solutions. About Seneca Resources At Seneca Resources, we are more than just a staffing and consulting firm-we are a trusted career partner. With offices across the U.S. and clients ranging from Fortune 500 enterprises to government organizations, we connect talented professionals with meaningful work that drives impact. When you work with Seneca, you're choosing a company that invests in your success, celebrates your achievements, and provides opportunities aligned with your career goals. Our consultants and contractors enjoy competitive pay, comprehensive health, dental, and vision coverage, 401(k) plans, and continuous support from a dedicated team committed to your professional growth. Seneca Resources is proud to be an Equal Opportunity Employer, fostering a diverse and inclusive workplace where all qualified individuals are encouraged to apply.

The Motion and Controls Engineer, a member of the Flight Dynamics Group, is a highly motivated, self-driven team player responsible for the development, integration, testing, and documentation of motion and flight control simulations for flight training simulators across a wide range of fixed and rotary-wing commercial and military aircraft. This role requires experience in aerodynamics, mechatronics, and servo design, as well as the ability to succeed in a fast-paced, dynamic prototyping environment. Responsibilities Develop aircraft test plans and provide on-site data collection support. Post-process aircraft test data and prepare simulator verification data roadmaps. Design simulator motion and control loading systems. Develop aircraft motion and flight control simulation math models and software to execute these models in real-time. Integrate simulation models with simulator hardware, computers, software, and other simulated systems. Prepare simulator qualification test guides and acceptance test procedures. Participate in domestic and international simulator acceptance and qualification events with customers, military organizations, and commercial regulatory agencies. Prepare math model reports and associated simulator documentation. Participate in system requirements, design, and test reviews. Collaborate with other multi-disciplined engineering groups to ensure that overall simulator performance and quality standards are achieved. Maintain currency with the latest domestic and international flight simulator regulations and technologies. Provide technical content for proposals and technical specifications. Essential Skills 1-2 years of experience in developing/integrating flight dynamic models and creating Qualification Test Guides (QTGs) in the flight simulation industry. Bachelor's degree in Aerospace Engineering, Physics, or related field. Experience with feedback control systems. Experience with real-time modeling. Proficiency with modern software systems, including C/C++, Python, Linux, Git. Excellent verbal and written communication skills. Additional Skills & Qualifications Rigorous understanding of servo control and stability. In-depth understanding of fixed and rotary-wing aircraft flight control systems. Knowledge of motion, vibration, and buffet simulation methods. Ability to work independently or in a team environment. Strategic innovator with critical thinking skills. Strong work ethic, accountability, and integrity. Professional and diplomatic demeanor. Ability to travel for extended periods domestically and internationally up to 25% annually. Direct experience designing 6DOF motion systems and/or control loading systems is preferred. Field experience with aircraft testing. Piloting knowledge of fixed-wing and/or rotary-wing aircraft. Work Environment The position offers a unique and interesting work experience with a large organization that supports continued growth and learning. The work schedule follows a 9/80 format, allowing for a balanced work-life experience. This is an onsite role. Job Type & Location This is a Permanent position based out of Lutz, FL. Pay and Benefits The pay range for this position is $95000.00 - $125000.00/yr. benefits relocation package Workplace Type This is a fully onsite position in Lutz,FL. Application Deadline This position is anticipated to close on Jan 20, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Electrical Engineer - Mission Critical Projects TECfusions is the fusion of Technology, Environmental Protection, and Community support. We address complex infrastructure challenges including hyperscale capacity demands, energy reliability, sustainability, environmental conditioning, and resilient power systems. Our work focuses on delivering energy-reliable, future-ready infrastructure through proven engineering practices that support global digital growth while protecting our planet. We welcome individuals who want to build meaningful, high-impact infrastructure in a collaborative, technically rigorous environment. About the Role As an Electrical Engineer, you will play a key role in the design, coordination, and execution of electrical systems for hyperscale data centers and other mission-critical facilities. You will work closely with senior engineers and project leadership while independently owning defined scopes of work and serving as a technical resource across project phases. Key Responsibilities - Develop, review, and coordinate electrical designs and documentation (BOD through IFC) - Serve as a technical point of contact for electrical coordination - Support construction and commissioning efforts - Participate in value engineering and constructability reviews - Review drawings, specifications, and calculations - Support QA/QC processes - Perform or review electrical studies - Participate in site visits and inspections - Provide guidance to junior engineers Qualifications - Bachelor's degree in Electrical Engineering or related discipline - 5-10+ years of experience - Experience with power distribution systems - U.S. work authorization - EIT or PE preferred - Strong communication and analytical skills - Willingness to travel Preferred Experience - Data center electrical systems - AutoCAD, Revit, or BIM tools - Electrical studies experience - Commissioning exposure - Power generation or renewables TECfusions is an Equal Opportunity Employer

As a member of a world class team, the Manufacturing Improvement Engineer will be responsible for Process and quality improvements for the Clearwater facility which includes multiple product lines. This person will utilize their experience to execute a strategy to reduce inventory, lead time, and waste. Job Description Essential Functions * Drive operational excellence at the clearwater plant through kaizen and lean events, continuous improvement activities and projects * Act as a change agent in the implementation of demand flow technology using state-of-the art tools and methodologies, * Educate, coach, and mentor others on Lean philosophy and application * Identify potential process improvement projects, drive lean manufacturing activities and ensure progress while tracking project status and closure * Develop and coordinate lean manufacturing training and education * Leverage best practice strategies and drive consistencies across site * Facilitate kaizen events, develop sustainment plans and present to leadership * Guide functional teams in developing and executing lean plans to reduce cycle time, inventory and waste to improve process quality and create capacity * Assist functional managers in establishing a process flow * Encourage use of lean tools to pull material from internal sources / customers * Remain current on lean methodologies and train within the Plant on lean concepts and mentor people using lean tools * Remain current on lean methodologies and train within the Plant on lean concepts and mentor people using lean tools Qualifications / Requirements * Bachelor's degree from an accredited university or college (or a high school diploma and equivalent experience) * 3 Years of experience working in a manufacturing environment that includes Lean concepts & tools Desired Characteristics: * Engineering degree * OMLP Graduate * Strong interpersonal and leadership skills * Demonstrated ability to analyze and resolve problems * Demonstrated ability to lead programs / projects * Ability to document, plan, market and execute programs * Established project management skills GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes For candidates applying to a U.S. based position, the pay range for this position is between $81,700.00 and $136,700.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. Bonus eligibility: ineligible. This posting is expected to remain open for at least seven days after it was posted on January 09, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off. GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.

The Engineering Division of Honeycomb Company of America, Inc., has an opening for an Aerospace Manufacturing Engineer with particular expertise and experience in aircraft composite and metal bonded structures. Primary Responsibilities: · Establish manufacturing requirements derived from OEM engineering drawings, process specifications, loft data, and contracts.· Create total manufacturing instruction package for the fabrication of aircraft metal bonded and composite structures. · Create BOMs, CAD drawings, and detailed manufacturing instructions that establish procedures for detail parts, assemblies, and tooling, as well as inspection and test requirements.· Provide immediate technical support to manufacturing personnel (work instruction clarification, performing redlines).· Support Quality department with non-conformance investigations.· Support Purchasing department in selection of materials and suppliers.· Work in coordination with all departments (Engineering, Production, Purchasing, Quality, etc.). Develop process solutions enabling increased throughput, cost savings, and quality performance. · Serve as a key contributor in the company's growth strategy and commitment to exceed customer expectations. Required Knowledge/Skills, Education and Experience:· Bachelor's Degree in Aerospace or Mechanical Engineering. · 1-3 years of experience in the manufacture or repair of aerospace composite structures. · Experience using SolidWorks CAD software.· Experience with metal bonding processes.· Experience with composites and plus.· Experience with loft data interpretation and 3D modeling.· Knowledge in areas such as NC routing, sheet metal manufacturing, brake forming, welding, machining, heat treating, chemical processing, anodizing, chem-milling, stretch forming, hydro-forming, composite layup and cure, fiberglass, carbon fiber, and Kevlar. · Highly motivated and able to work effectively in a high-paced, dynamic, and collaborative environment. · Must be able to work effectively across functional teams, and independently. · Strong ability to successfully manage multiple projects simultaneously · Must be a detail oriented, hands-on individual, with strong written and verbal communication skills.· Functional knowledge of CATIA, Fibersim, and model based definition. · Experience working with NADCAP requirements, as well as ISO9000, AS9100, AS9102. · Experience with ERP/MRP Systems. Physical Demands The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; climb stairs, use hands and fingers; and reach with hands and arms. Ability to lift up to 15 pounds several times a day, and lift up to 40 pounds on an occasional basis. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Honeycomb Company of America is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, marital status, family responsibilities, pregnancy, genetic information, protected veteran or military status, other categories protected by federal, state, or local law, and regardless of whether the qualified applicants are individuals with disabilities. Honeycomb Company of America is a Drug-Free Workplace. Offers of employment with Honeycomb Company of America are conditioned upon the successful completion of a background check and drug-test, subject to applicable laws and regulations.

Job DescriptionDescription: This is a 100% on-site position based in St. Petersburg, FL. Candidates must report in person Monday through Friday. Relocation assistance is not provided. Develops, implements, and manages projects designed to enhance product development through process enhancement, equipment enhancement or equipment procurement in support of Lean organizational objectives. Initiates change initiatives that deliver quality, productivity, and material flow in a manufacturing environment. Performs engineering tasks by researching, collaborating, and monitoring progress/success with moderate direction. Essential Duties and Responsibilities include the following. Other duties may be assigned. 1. Investigates, designs, and implements approaches to computer integrated manufacturing and robotics equipment, manufacturing methods, equipment maintenance and improvement, and production processes to optimize resource utilization. 2. Delivers proposals to stakeholders and leadership to gain support and buy in for new product equipment requirements, manufacturing methods, and processes by using case study data from related industry activity. 3. Responsible for installing and commissioning new production units, monitoring development (i.e., modifications and upgrades) and troubleshooting existing equipment and processes. Investigates and implements equipment, tooling, materials, and methods of manufacturing. 4. Plans and coordinates for major equipment overhauls and executes plans within the time constraints of the business. 5. Writes, reviews, and revises operating instructions/procedures/change notices for production operations collaborating with the appropriate resources. 6. Conducts or coordinates times and motion studies to establish optimum production standards for production operations related to new product initiatives. 7. Develops techniques for monitoring, controlling, and improving product/process quality including coordination of vibration analysis through vendors. 8. Identifies and finds solutions for obsolete parts and/or mechanical systems in the manufacturing plant. 9. Assists and trains staff in Manufacturing families and Maintenance on tasks and skills needed. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Regular attendance during regularly scheduled business hours mandatory. In-person supervision during working hours and personal interaction with co-workers and operations leadership required. CAD/SolidWorks experience Familiarity with PLC systems (primarily Siemens and Allen Bradley) in a manufacturing environment Skills with tools and equipment for parts fabrication such as 3-D printers Education/Experience: Bachelor's degree in engineering is strongly preferred. Mechanical, Mechatronic/Robotic Engineering degrees preferred. Minimum of 5 years of experience in related activities (equipment design, re-engineering project work, new equipment design, operations leadership, mechanical engineering, etc.) in a manufacturing environment or a combination of relevant experience and education totaling 10 years. Strong facilitation and leadership skills Creative problem-solving skills Analytical strength Self-directed/self-starter Strong communication/collaboration skills Strong planning/organizational/follow up skills Knowledge of Lean manufacturing best practices Statistical process control knowledge Strong Mechanical knowledge Familiarity with WinCC/SCADA systems #LI-PW1 Requirements:

We are seeking a sharp, driven, on\-site Manufacturing Engineer to develop SOPs, work instructions and process documentation. This role is for a someone determined to make an impact to our business and learn in a hands\-on capacity with a strategic aerospace company. If you are a self\-starter with a hunger for success and troubleshooting, this is your chance to shine! Requirements Key Responsibilities: SOPs: creating and developing for manufacturing processes to standardize operations Work Instructions: developing clear, step by step instructions for operators and technicians Process Documentation: document the sequence of operations, workflows and interactions between different stages of production Who You Are: College graduate with an Engineering degree Manufacturing experience in a team environment for at least one or more years Must be able to work with ITAR products and related data without restriction "}}],"is Mobile":false,"iframe":"true","job Type":"Contract","apply Name":"Apply Now","zsoid":"689506860","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Airline \- Aviation"},{"field Label":"City","uitype":1,"value":"Clearwater"},{"field Label":"State\/Province","uitype":1,"value":"Florida"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"33765"}],"header Name":"Manufacturing Engineer","widget Id":"5**********0072311","is JobBoard":"false","user Id":"5**********0751003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":false,"job Id":"5**********8786053","FontSize":"12","location":"Clearwater","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"951ctcdc443cbcd1e43439238ec196e13f682"}

In this role, you will impact our manufacturing operations by optimizing production processes and driving continuous improvement initiatives, contributing to increased efficiency, reduced costs, and improved quality. Your expertise will help us stay at the forefront of advanced manufacturing technologies and ensure that we deliver innovative and high-quality products to our customers. Join a team that applies its technical expertise and knowledge to ensure products are produced with high quality and efficiency. You will be the technical lead with responsibility for product and process application supporting multiple Defense programs. You will ensure product integrity, manufacturing output, and continuous improvements working with factory operations. KEY RESPONSIBILITIES * Problem resolution * Process utilization * Technical expert at CCA level * Risk avoidance * Product compliance * Creation of Work Instructions * Project management * Data analysis * Cause chain analysis (Root Cause Corrective Action) * Continuous improvement * Facilitates lean initiatives * Drawing review redlines * CAD drawing creation and updates YOU MUST HAVE * Bachelors Degree in Engineering or related technical field * Minimum of 4 years of manufacturing experience WE VALUE * Electrical Engineering Degree * Hands on work ethic * Out of box thinking * Provide clear and concise communications * Greenbelt Certified * Proficient computer skills * SAP tool understanding * Solumina MES systems knowledge * Ability to work independently * Knowledge of six sigma tools * Track record of successful contributions to projects * Ability to partner with others on projects ABOUT HONEYWELL Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical challenges around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company committed to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. Learn more about Honeywell: click here (******************************** THE BUSINESS UNIT Honeywell Aerospace Technologies (AT) products and services are found on virtually every commercial, defense, and space aircraft in the world. We build aircraft engines, cockpit and cabin electronics, wireless connectivity systems, mechanical components and more, and connect many of them via our high-speed Wi-Fi offerings. Our solutions create healthier air travel, more fuel-efficient and better-maintained aircraft, more direct and on-time flight arrivals, safer skies and airports, and more comfortable flights, along with several innovations and services that reflect exciting and emerging new transportation methods such as autonomous and supersonic flight. Revenues in 2023 for Honeywell Aerospace Technology were $14B and there are approximately 21,000 employees globally. To learn more, please visit click here (********************************** Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status. Learn more about inclusion and diversity :click here (**************************************************************** BENEFITS OF WORKING FOR HONEYWELL In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: click here (******************************** The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Posting Date: December 4, 2025 U.S. PERSON REQUIREMENTS Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. citizen, U.S. permanent resident, or have asylum or refugee status in the U.S.

In this role, you will impact our manufacturing operations by optimizing production processes and driving continuous improvement initiatives, contributing to increased efficiency, reduced costs, and improved quality. Your expertise will help us stay at the forefront of advanced manufacturing technologies and ensure that we deliver innovative and high-quality products to our customers. Join a team that applies its technical expertise and knowledge to ensure products are produced with high quality and efficiency. You will be the technical lead with responsibility for product and process application supporting multiple Defense programs. You will ensure product integrity, manufacturing output, and continuous improvements working with factory operations. YOU MUST HAVE Bachelors Degree in Engineering or related technical field Minimum of 4 years of manufacturing experience WE VALUE Electrical Engineering Degree Hands on work ethic Out of box thinking Provide clear and concise communications Greenbelt Certified Proficient computer skills SAP tool understanding Solumina MES systems knowledge Ability to work independently Knowledge of six sigma tools Track record of successful contributions to projects Ability to partner with others on projects ABOUT HONEYWELL Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical challenges around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company committed to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. Learn more about Honeywell: click here (******************************** THE BUSINESS UNIT Honeywell Aerospace Technologies (AT) products and services are found on virtually every commercial, defense, and space aircraft in the world. We build aircraft engines, cockpit and cabin electronics, wireless connectivity systems, mechanical components and more, and connect many of them via our high-speed Wi-Fi offerings. Our solutions create healthier air travel, more fuel-efficient and better-maintained aircraft, more direct and on-time flight arrivals, safer skies and airports, and more comfortable flights, along with several innovations and services that reflect exciting and emerging new transportation methods such as autonomous and supersonic flight. Revenues in 2023 for Honeywell Aerospace Technology were $14B and there are approximately 21,000 employees globally. To learn more, please visit click here (********************************** Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status. Learn more about inclusion and diversity :click here (**************************************************************** BENEFITS OF WORKING FOR HONEYWELL In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: click here (******************************** The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Posting Date: December 4, 2025 U.S. PERSON REQUIREMENTS Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. citizen, U.S. permanent resident, or have asylum or refugee status in the U.S. KEY RESPONSIBILITIES Problem resolution Process utilization Technical expert at CCA level Risk avoidance Product compliance Creation of Work Instructions Project management Data analysis Cause chain analysis (Root Cause Corrective Action) Continuous improvement Facilitates lean initiatives Drawing review redlines CAD drawing creation and updates

• Mindlance is a minority-owned, national staffing firm specializing in Technology, Engineering, Scientific, Clinical, Financial and Professional skills. With a team of over 100 service delivery professionals spread over 10 locations, we serve contract and perm staffing needs of over 40 Fortune 1000 direct clients and leading MSP and VMS providers. Duration: 12+ months Location: Tampa, FL Job Description: · Assist in executing various studies for the IV projects. Examples include SIP studies, mixing, volume, temperature distribution. · Candidate should be able to execute studies with minimal direction, recommend solutions to issues, and general process and equipment feedback. · 5+ years of experience in validation studies for automated compunding vessels in a pharmaceutical environment. · Experience must include writing reports. Qualifications · 5+ years of experience in validation studies for automated compunding vessels in a pharmaceutical environment.

Manufacturing Process Engineer - Electronics / CCA Production Clearance Requirements: None Contract to Hire Pay Rate:$35/hr We are seeking a hands-on Manufacturing Process Engineer to support the design, optimization, and continuous improvement of manufacturing processes for circuit card assemblies (CCA), electronic module builds, and cable harness production. This role involves collaborating with engineering, operations, quality, and production teams to enhance manufacturability, improve workflow efficiency, develop tooling, and ensure compliance with specifications and regulations. The ideal candidate understands electronic manufacturing processes, can interpret engineering drawings, and has experience designing production layouts or writing process documentation. This is an excellent opportunity for a technical professional who enjoys supporting the production floor, driving improvements, and delivering high?quality manufacturing solutions. Responsibilities: Design and improve manufacturing processes, procedures, and production layouts for CCAs, electronic modules, and subassemblies. Review and interpret engineering prints to develop accurate and efficient manufacturing processes. Collaborate with design engineering to drive production improvements and optimize manufacturability. Support day?to?day production floor activities in partnership with operations and quality teams. Design, procure, and implement tooling, fixtures, and manufacturing aids to support efficient assembly processes. Incorporate inspection and test requirements into production plans where applicable. Monitor performance of machinery, equipment, and tools; investigate deficiencies and recommend corrective actions. Ensure compliance with manufacturing standards, specifications, and regulatory requirements. Provide feedback to engineering regarding design concepts and specification improvements. Drive continuous improvement initiatives focusing on quality, throughput, and process efficiency. Perform physical tasks including climbing stairs and lifting up to 20 lbs. Shift Schedule: Monday - Thursday, 5:00 AM to 3:30 PM EST Required Skills/Education: Experience designing or improving manufacturing processes for circuit card assemblies (CCA) or electronic modules. Ability to read, interpret, and apply engineering drawings, schematics, and technical documentation. Hands-on experience supporting production floor operations and resolving process issues. Ability to design or modify tooling, fixtures, and assembly processes. Strong understanding of manufacturing standards, quality requirements, and compliance processes. Ability to read/write in English. Ability to climb stairs and lift up to 20 lbs. Preferred Skills: Cable harness experience (routing, assembly, documentation). Experience writing or updating manufacturing process documentation. Familiarity with CCA assembly processes including soldering, inspection, reflow, or AOI. Experience working in electronics manufacturing or defense/aerospace environments. Strong continuous improvement mindset with the ability to identify process gaps and drive solutions. About Seneca Resources At Seneca Resources, we are more than just a staffing and consulting firm-we are a trusted career partner. With offices across the U.S. and clients ranging from Fortune 500 enterprises to government organizations, we connect talented professionals with meaningful work that drives impact. When you work with Seneca, you're choosing a company that invests in your success, celebrates your achievements, and provides opportunities aligned with your career goals. Our consultants and contractors enjoy competitive pay, comprehensive health, dental, and vision coverage, 401(k) plans, and continuous support from a dedicated team committed to your professional growth. Seneca Resources is proud to be an Equal Opportunity Employer, fostering a diverse and inclusive workplace where all qualified individuals are encouraged to apply.

JOB TITLE: (P) Manufacturing Engineer PAY RATE: Up to $43/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Shift: Monday-Thursday, 3:30 PM - 2:00 AM EST Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Designs manufacturing processes, procedures, and production layouts for cable harness assemblies and subassemblies. Interprets engineering drawings to develop and optimize processes and collaborates with design engineering to improve manufacturability. Supports the production floor by partnering with operations to drive continuous improvement. Designs, procures, and implements tooling to support manufacturing processes and may incorporate inspection and test requirements into production planning. Monitors equipment and tool performance, investigates deficiencies, and initiates corrective actions to ensure product quality and process efficiency. Provides input to engineering on design concepts and specifications to optimize manufacturing methods. Ensures all processes and procedures comply with applicable regulations and specifications. Requirements: Bachelor's degree in Manufacturing, Mechanical, Industrial Engineering, or a related discipline Must understand cable assembly processes Must be able to read and write in English Must be a U.S. Person (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today!

Job Description A leading manufacturer is seeking a Process Engineer to serve as the primary technical resource for process engineering at their site in Tampa, FL. This role blends hands-on process optimization, ensuring efficient, safe, and high-quality operations . The position offers strong growth potential to support additional facilities in FL as expertise and leadership expand. Key Responsibilities Process & Quality Leadership - Serve as the primary process engineer, driving daily operations and ensuring compliance with standards and regulations. Optimization & Improvement - Monitor, troubleshoot, and optimize manufacturing processes. Equipment Support - Provide technical expertise for the operation, maintenance, and commissioning of new equipment; partner with maintenance teams on PM programs. Continuous Improvement & Development - Identify efficiency opportunities, support new product development, and participate in cross-functional improvement teams. Customer & Business Support - Provide technical expertise for customer requirements, support audits, and partner with sales and technical teams on new business initiatives. Qualifications Bachelor's in Chemical, Mechanical, Materials Engineering, or related technical field. 2+ years in plastics manufacturing or related manufacturing process (i.e., injection molding, thermoset, rubber compound, thermoplastics, etc.) Strong analytical, problem-solving, and communication skills. EOE

CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers and consumers alike. With operations in 39 countries employing approximately 25,000 people and net sales of approximately $12 billion, we are uniquely positioned to bring best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated and driven individuals. Division: Crown's Food Division is a premier manufacturer of food cans and ends. Our complete array of food packaging serves a variety of markets, including fruit, vegetables, dairy, fish, meat, ready meals, pet food, infant milk powder and other dry food products. We offer a wide selection of food cans from round to bowl as well as shaped cans. We truly focus on excellence. Here is your chance to join the Crown Food Business Unit. Location: Ideal candidate will reside near a major airport in the Midwest and/or Eastern Region of the US as this position will require up to 70% regular travel to the Plant locations. Position Overview: The Manufacturing Engineering (with an Electrical Engineering emphasis) will support eight (8) facilities of the North American Food Division manufacturing operations. This position will work closely with the manufacturing facilities in regard to electrical programming, problem solving, etc. for both the 3-Piece and 2-Piece steel and aluminum food cans and end processes. Duties And Responsibilities: Reporting directly to the Sr Manager Production Engineering (Electrical) duties would include but not be limited to the following: Providing problem-solving on electrical technical matters relating to food can and end performance Developing full documentation package of new and existing installations Continued support of new installations and plants until production efficiencies and goals are met Support plants and personnel as required to identify production problems or issues, identify viable solutions and implement the same Develop job completion schedules and monitor their progress Guide, support and train plant electrical teams Qualifications: In addition to the specific responsibilities listed above, the ideal candidate will possess the following: Minimum Requirements BS degree in Electrical or Electronics Engineering or a related discipline 5+ years in a packaging manufacturing environment, food production or a similar industry. Strong technical knowledge demonstrating broad understanding of electrical power and controls design and installation Demonstrated experience in PLC logic programming, documentation, and troubleshooting control programs (Allen Bradley, Siemens, Modicon, etc.) Experience with facilities power distribution (including voltages to 600v & three phase) and control systems and subsystems Power transmission equipment such as gearboxes, drive trains, conveying equipment, etc. Proven record of delivering engineering outputs to achieve scheduled targets Effective communication skills are needed for this role, both verbal and written as well as the ability to interact with employees at all levels of the organization. Self-motivated and eager to take the initiative; with the ability to work effectively in a team setting and as an individual Well organized and detail oriented with good time management skills Strong PC skills are a must, especially using Word, Outlook, and Excel. Committed to on-going personal development and career growth Preferred Requirements Steel and/or aluminum manufacturing environment experience would be ideal A certification in Six Sigma and/or Lean Manufacturing would be a plus Physical Requirements While performing the duties of this job, the associate is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl The associate may lift and/or move up to 50 pounds Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus Working Conditions Will be required to perform job duties outside of the typical office setting in a plant environment as well as in an office. While performing the duties of this job, the associate may be exposed to moving mechanical parts and vehicular traffic. The associate may be exposed to a wide range of temperatures. The noise level is frequently loud. *Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Job Description Job Summary Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern! The Manufacturing Engineering internship offers a distinct role based on your major and field of interest: Manufacturing Engineering Internship: In this role you will build a strong technical foundation in manufacturing and assembly processes. This may include key manufacturing, new product integration, new technology integration, continuous improvement, and cost out. This internship is a great first step for those interested in our MEDP or OMLP program after graduation. Essential Responsibilities Our Manufacturing and Supply Chain organizations combine passionate people, cutting-edge technology, and a culture of continuous improvement to provide the highest quality products to our customers. Members of our team are part of a fast-paced and dynamic environment. They typically have the benefit of getting hands-on experience with our products. In either internship experience, you'll be expected to: * Learn and understand state-of-the-art methods of manufacturing, * Support manufacturing and repair processes for component hardware and/or overall engine assembly, * Maintain high-quality standards via risk assessment, root cause analysis, corrective action, and the application of statistical controls * Ensure safe work conditions via Environmental, Health & Safety (EHS) initiatives * Learn and apply Lean and Six Sigma principles to drive productivity, on-time delivery, process capability, and stable operations in our increasingly complex and demanding environment * Supporting delivery efforts for sourced components by working with our shops and suppliers while building project management skills, negotiation skills, and business acumen Qualifications/Requirements: * Minimum 3.0 cumulative G.P.A. on a 4.0 scale without rounding * Attending a full-time registered and nationally accredited bachelor or graduate program (accepted majors are listed below) * Willingness and ability to work in any of the 35+ GE Aerospace U.S. locations * Reliable transportation, as many of our sites do not have public transportation available Degrees accepted: * Aeronautical/Aerospace Engineering * Ceramic Engineering * Chemical Engineering * Civil Engineering * Computer Engineering * Computer Science * Electrical Engineering / Electrical & Computer Engineering * Engineering Technology (various) * Fiber/Polymer Science * Industrial Engineering * Manufacturing Engineering * Materials Science/Engineering * Mechanical Engineering * Systems Engineering * Welding Engineering Or any relevant or similar major to the ones above Eligibility Requirements: Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired characteristics: * Humble: respectful, receptive, agile, eager to learn * Transparent: shares critical information, speaks with honesty, contributes constructively * Focused: quick learner, strategically prioritizes work, committed, and takes initiative * Leadership ability: strong communicator, decision-maker, collaborative teamwork * Problem solver: analytical-minded, challenges existing processes, critical thinker * Comfortable working in a fast-paced shop floor environment around various machine tools and equipment * Preference will be given to those with prior internship, co-op or military experience in manufacturing/supply chain or engineering * Demonstrated commitment to community and/or university involvement Benefits: Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city. Equal Opportunity Employer: GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

PCB Engineer - Power Electronics We're seeking a talented PCB Design Engineer to lead the circuit board development of cutting-edge LED drivers, emergency lighting systems, surge protection devices, ballasts, and transformers for commercial, residential, and specialty applications. This is a role for an engineer who excels at translating power electronics concepts into production-ready PCB layouts delivering designs that optimize performance, efficiency, and manufacturability. Why This Role Stands Out This opportunity sits inside a well-established, U.S.-based manufacturer with a 40-year track record of engineering power solutions trusted across the lighting industry. Pioneered advancements include: - Patented programmable LED drivers with industry-leading dimming performance - Compact constant-voltage drivers designed for space-critical applications - Emergency LED driver systems and surge protection devices that set quality benchmarks You'll join a tight-knit engineering team that values innovation, precision, and the freedom to design products that last. What You'll Do Design & Develop advanced LED drivers and related power electronics, from concept to production-ready systems. Prototype & Test products in real-world scenarios, ensuring reliability and compliance with safety certifications. Collaborate Cross-Functionally with mechanical engineers, manufacturing, supply chain, and support teams to bring designs to market. Support Product Lifecycle with documentation, troubleshooting, and continuous improvement. Advance Your Skills under the mentorship of senior engineering talent, building toward full ownership of new product development. Bachelors degree in Electrical or Electronic Engineering (or related discipline). Foundational to intermediate PCB design experience; familiarity with tools such as Altium is a plus. Understanding of power electronics, preferably in LED drivers, transformers, or power supplies. Strong attention to detail, problem-solving skills, and a commitment to quality. Ability to work both independently and as part of a collaborative, fast-moving team. You Bring Bachelors degree in Electrical or Electronic Engineering (or related discipline). Foundational to intermediate PCB design experience; familiarity with tools such as Altium is a huge plus. Understanding of power electronics, preferably in LED drivers, transformers, or power supplies. Ability to hit the ground running. Strong attention to detail, problem-solving skills, and a commitment to quality. Ability to work both independently and as part of a collaborative, fast-moving team. What's in It for You Competitive Package Base salary plus performance bonuses, health/dental/vision, PTO, and 401(k) match. Growth Path Develop your skills toward advanced PCB and power electronics design leadership. Supportive Culture Join a team that treats its people as valued contributors, not headcount. Engineering Impact See your designs power projects in architectural, commercial, and industrial spaces. Innovation Legacy Work on products that set industry standards for performance and reliability. Ready to Design the Future of Lighting Power? Bring your PCB design expertise to a role where precision engineering meets real-world impact and where your layouts will define the next generation of lighting power solutions.

We are a smart Controls company with proprietary and enclosed control systems and we are changing how these control systems work in today's technology ********************** we are one of the top three companies in the world that are creating and deploying this technology. We dream of making the world just a little bit better by delivering uplifting technology and are seeking like-minded individuals that want to take advantage of entry-level opportunities and gain hands-on experience on the edge of innovation. About You: You enjoy pushing technology forward, feel excited about complex problems and love to be on the edge between R&D and production. You are cool about collaborating with others and understand the value of team work. You are passionate about Agile practices and enjoy speed, change and flexibility. You want have a passion for learning and continuous improvement. Duties and Responsibilities: Follow the assembly instructions soldering and connecting the components according to the specifications. Ensure that the products have the correct firmware version, flash new firmware. Follow the commissioning requirements to design the networks and to commission the devices accordingly. Perform quality checks on each step to ensure proper electronic functionalities as well as the correct firmware package and version. Perform quality checks to ensure that the commissioned products comply with customer's requirements.The goal is to get the products finished, tested, cleaned, bagged, labeled and ready for shipment. Required Experience and Qualifications: Possess a Technical degree in Electronics Engineering, Electronics Design, or equivalent experience that would meet the minimum performance requirements for this position. 3 years minimum experience in working with electronics: PLC, PCB, Firmware, Hardware (in lab, school or workshop environment is ok). Able to read and interpret schematics, wiring diagrams, layouts and engineering drawings. Able to use hand tools including but not limited to calipers, strippers, crimpers, screwdrivers, drills. Soldering certification preferred, but must be experienced. Willing and able to do research and to continuously learn and improve technical knowledge Must be comfortable working at heights to perform maintenance and repair work on hardware using ladders, scaffolding or other equipment to access elevated work areas following all safety protocols and use personal protective equipment as required. Ability to work autonomously Drug Free Workplace: We are a Florida Drug Free Workplace. The company requires all employees to complete a pre-employment 10 panel drug screen; employment status will be dependent on ability to pass this screening and partake on a quarterly random screen. Hours, compensation and benefits: Full-time, on-site hours 8am to 5pm, Rate starts at $25 per hour and is negotiable based on certifications, skillset and experience. After 30-day waiting period employees become eligible for Medical, Dental and Vision insurance, paid holidays and paid time off that increase with longevity. After an initial 90-Day waiting period, employees may participate in the company-sponsored 401(k).

In this role, you will impact our manufacturing operations by optimizing production processes and driving continuous improvement initiatives, contributing to increased efficiency, reduced costs, and improved quality. Your expertise will help us stay at the forefront of advanced manufacturing technologies and ensure that we deliver innovative and high-quality products to our customers. Join a team that applies its technical expertise and knowledge to ensure products are produced with high quality and efficiency. You will be the technical lead with responsibility for product and process application supporting multiple Defense programs. You will ensure product integrity, manufacturing output, and continuous improvements working with factory operations. **KEY RESPONSIBILITIES** + Problem resolution + Process utilization + Technical expert at CCA level + Risk avoidance + Product compliance + Creation of Work Instructions + Project management + Data analysis + Cause chain analysis (Root Cause Corrective Action) + Continuous improvement + Facilitates lean initiatives + Drawing review redlines + CAD drawing creation and updates **YOU MUST HAVE** + Bachelors Degree in Engineering or related technical field + Minimum of 4 years of manufacturing experience **WE VALUE** + Electrical Engineering Degree + Hands on work ethic + Out of box thinking + Provide clear and concise communications + Greenbelt Certified + Proficient computer skills + SAP tool understanding + Solumina MES systems knowledge + Ability to work independently + Knowledge of six sigma tools + Track record of successful contributions to projects + Ability to partner with others on projects **ABOUT HONEYWELL** Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical challenges around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company committed to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. Learn more about Honeywell: click here (******************************** **THE BUSINESS UNIT** Honeywell Aerospace Technologies (AT) products and services are found on virtually every commercial, defense, and space aircraft in the world. We build aircraft engines, cockpit and cabin electronics, wireless connectivity systems, mechanical components and more, and connect many of them via our high-speed Wi-Fi offerings. Our solutions create healthier air travel, more fuel-efficient and better-maintained aircraft, more direct and on-time flight arrivals, safer skies and airports, and more comfortable flights, along with several innovations and services that reflect exciting and emerging new transportation methods such as autonomous and supersonic flight. Revenues in 2023 for Honeywell Aerospace Technology were $14B and there are approximately 21,000 employees globally. To learn more, please visit click here (********************************** Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status. Learn more about inclusion and diversity :click here (***************************************************************** **BENEFITS OF WORKING FOR HONEYWELL** In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: click here (******************************** The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Posting Date: December 4, 2025 **U.S. PERSON REQUIREMENTS** Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. citizen, U.S. permanent resident, or have asylum or refugee status in the U.S. Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable. Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.

Job Title: Manufacturing EngineerJob Description As a Manufacturing Engineer, you will design manufacturing processes, procedures, and production layouts specifically for circuit card assemblies (CCA) and module assemblies. Your role will involve interpreting engineering prints to design processes, collaborating with design engineering to implement production improvements, and supporting the production floor with a focus on continuous improvement. Additionally, you will design, procure, and implement tooling to support manufacturing processes and may incorporate inspection and test requirements into the production plan. You will be responsible for inspecting the performance of machinery, equipment, and tools to ensure their efficiency and initiate corrective actions to address any problems or deficiencies. Furthermore, you will provide guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques while ensuring compliance with regulations and specifications. Responsibilities * Design manufacturing processes and production layouts for circuit card assemblies and subassemblies. * Work with the operations team to support the production floor and focus on continuous improvement. * Design, procure, and implement tooling to support manufacturing processes. * Incorporate inspection and test requirements into the production plan. * Inspect the performance of machinery, equipment, and tools to verify their efficiency. * Investigate and initiate corrective actions to ensure product quality. * Provide guidance to engineering regarding design concepts and specification requirements. * Ensure processes and procedures comply with regulations and specifications. Essential Skills * Bachelor's degree in a relevant field with 4-8 years of experience in manufacturing engineering. * Experience with circuit card assemblies and general assembly. * Proficiency in blueprint reading and AutoCAD. * Knowledge of cable harness and wire harness print reading. * Understanding of circuit card assembly processes. Additional Skills & Qualifications * Experience with IPC-WHMA-A-620 and J-STD-001 is beneficial but not required. * Familiarity with surface mount technology is a plus. * Cable harness experience and process writing are advantageous. Work Environment The position is fully onsite with a 4/10 schedule. You will work the 1st shift from 5:00 AM to 3:30 PM. Job Type & Location This is a Contract position based out of Oldsmar, FL. Pay and Benefits The pay range for this position is $32.00 - $43.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Oldsmar,FL. Application Deadline This position is anticipated to close on Jan 21, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.