Advanced engineer jobs in West Valley City, UT - 270 jobs

Role: Onsite Manufacturing Quality Engineer We're seeking a hands-on Manufacturing Quality Engineer to support the creation, validation, and maintenance of Manufacturing & Quality Instructions (MQIs) for aerospace production. The role involves coordinating with engineering, quality, and supplier teams to ensure manufacturing documentation reflects the latest design intent while resolving real-time vendor and shop floor queries. Key Skills: Strong background in Manufacturing Engineering & Quality Systems (Aerospace preferred). Experience with FAI, gage R&R, and inspection documentation. Competent in 2D/3D CAD interpretation and PLM workflows. Knowledge of process capability, OEE, and inspection correlation is desirable. Excellent coordination, communication, and documentation skills. This role offers the opportunity to influence process reliability and zero-defect initiatives, acting as the on-site bridge between production realities and engineering excellence

A well-established manufacturer in the furniture industry is seeking a Plastic Process Improvement Engineer in Provo, Utah. Candidates Must Have: Bachelors Degree in Engineering or equivalent previous experience. Strong background and understanding of injection molding equipment. Strong background and understanding of plastic extrusion equipment. Proficiency in SolidWorks. Knowledge of Lean Manufacturing, preferred.

Ogden, UT(Onsite) Key Skill: MQI document creation The Onsite Manufacturing Quality Engineer (MQE) will be the primary technical interface supporting the development, validation, and maintenance of Manufacturing & Quality Instructions (MQIs). This role bridges engineering, quality, and supplier teams to ensure manufacturing documentation accurately represents the latest design and process standards while supporting daily production and vendor queries. The MQE will also play a pivotal role in advancing process capability, inspection reliability, and OEE-based performance tracking - contributing directly to the customer's long-term zero-defect and reliability engineering objectives. Key Responsibilities Review, validate, and update MQIs to ensure alignment with current design definitions, EOs/ECRs/ECOs, and process requirements. Coordinate with engineering, manufacturing, and quality teams to gather and verify documentation inputs. Address and resolve vendor and shop floor queries related to manufacturability, inspection, and process compliance. Identify mismatches between 2D drawings and 3D models; drive resolution and documentation updates. Conduct and support First Article Inspections (FAI) and process tryouts for gaging and inspection systems. Lead gage correlation studies (e.g., CMM vs. manual inspection) and ensure consistent inspection methodologies. Maintain structured traceability logs for documentation updates and vendor clarifications. Collaborate with offshore authoring and process engineering teams for standardized documentation practices. Support customer initiatives in process capability improvement, inspection correlation, and reliability metrics (OEE, escape analysis, etc.) to enhance long-term manufacturing robustness. Skill-Set Requirements Strong understanding of Manufacturing Engineering, Quality Systems, and aerospace documentation standards. Proven experience in FAI, PPAP, and inspection process documentation. Working knowledge of ECO/ECR workflows, PLM systems, and drawing interpretation. Competence in 2D and 3D CAD model comprehension (CATIA or equivalent). Familiarity with gage R&R, correlation checks, and measurement system reliability. Strong communication and coordination skills for cross-functional collaboration with suppliers and engineering teams. Analytical approach to process data, capable of identifying and resolving documentation or reliability gaps. Nice to have: Exposure to process capability studies (Cp/Cpk) and OEE-based performance analysis. Experience supporting reliability engineering initiatives, such as inspection system validation, escape management, or process control standardization. Understanding of continuous improvement frameworks and digital readiness for future smart quality systems. Ideal Background Bachelor's degree in Mechanical, Manufacturing, or Industrial Engineering (or equivalent). 5-10 years of experience in Aerospace or Precision Manufacturing environments. Knowledge of AS9100, NADCAP, and related quality frameworks. Demonstrated success working with cross-functional teams and suppliers. Proactive, methodical, and collaborative - able to manage ambiguity and drive clarity in complex documentation environments

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Mission Systems is a trusted provider of mission-enabling solutions for global security. We have a wide portfolio of secure, affordable, integrated, and multi-domain systems and technologies. Our differentiated battle management and cyber solutions deliver timely, mission-enabling information and provide superior situational awareness and understanding to protect the U.S. and its global allies. Northrop Grumman Mission Systems is looking for you to join our team as a Manufacturing Engineer based in Salt Lake City, Utah. As a member of the Systems Manufacturing Engineering team, you will support manufacturing operations to produce precision, high-quality, inertial measurement and navigation systems. What you will get to do: Interact frequently with production operators to understand and troubleshoot manufacturing issues and receive inputs on potential process improvements. Create process flow diagrams and define the sequence of operations for build instructions. Support investigations of production issues to determine root causes and complete actions to address material deficiencies, equipment malfunctions, and assembly process errors. Perform critical evaluations of new systems designs and provide inputs to design and materials engineering regarding manufacturability. Provide technical inputs for supplier capability assessments. Develop and improve manufacturing processes while considering cost/benefit analysis. Utilize statistical process control and data driven methods to guide process, yield, and cost improvements. Basic Qualifications for the Manufacturing Engineer: A Bachelor's degree in physics, engineering or a related STEM field with 2 or more years of relevant work experience; OR a Masters degree in physics, engineering or a related STEM field with 0+ years of relevant work experience. Experience working in an engineering environment supporting manufacturing processes Experience performing basic troubleshooting of production issues related to process, equipment, or materials Experience reading and understanding engineering drawings, specifications, and parts lists Experience using Microsoft Office Products (Word, PowerPoint, Excel, MS-Project) Ability to obtain and maintain a Secret clearance US Citizenship is required Preferred Qualifications for the Manufacturing Engineer: Experience providing direct engineering support for assembly equipment, processes, and materials Experience supporting the implementation of new products into manufacturing Experience working in a highly regulated industry with strict customer/process requirements Experience in defense or related industry Experience with computer aided design tools such as SolidWorks and AutoCAD Project management experience (work breakdown, task planning and scheduling etc.) Experience providing direct engineering support for electro-mechanical, and optical assembly equipment and processes What We Can Offer You: Northrop Grumman provides a comprehensive benefits package and a work environment which encourages your growth and supports the mutual success of our people and our company. Northrop Grumman benefits give you the flexibility and control to choose the benefits that make the most sense for you and your family. Your benefits will include the following: Health Plan, Savings Plan, Paid Time Off and Additional Benefits including Education Assistance, Training and Development, 9/80 Work Schedule (where available), and much more! Primary Level Salary Range: $72,100.00 - $108,100.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Chemical Engineer About the Job Thatcher Company is seeking a Chemical Engineer to join our engineering team in Salt Lake City, Utah. In this role, you will provide process engineering and technical support to plant operations, capital projects, and other teams. You will work closely with operations and the business team to identify process improvement opportunities, implement plant improvement projects, and drive innovative solutions. What You Will Do Promote understanding and application of safety practices. Optimize plant production and efficiency by the implementation of improvement opportunities and management of process constraints. Work with operations and manufacturing experts to resolve technical issues. Develop and maintain process documentation and safety information such as P&IDs, material balances, equipment datasheets, process line sizing calculations, hydraulic calculations, and datasheets for instruments and relief devices. Contribute to process safety and environmental performance through participation in process hazards analysis (PHA), management of changes (MOC), and incident investigation. Manage small capital projects from design through startup. Qualifications Basic Qualifications Bachelor's degree in chemical engineering with 5+ years of experience in a process facility. Travel =< 20% What Will Put You Ahead Experience in process controls, project management, or process safety management. Experience with AutoCAD LT, AFT Fathom, or SolidWorks. Experience in process industry/manufacturing. Why Thatcher is right for you Competitive salary $100-125K annualized 100% company-funded Profit-Sharing Plan (up to 25% of salary annually) 401(k) with traditional and Roth contribution options Comprehensive benefits: medical, dental, vision, life insurance, short- and long-term disability, HSA/FSA, 3+ weeks of PTO, and paid holidays Education reimbursement and ongoing professional development. The pay for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience). Applications will be accepted while this position is posted on our Careers website. Thatcher is an Equal Opportunity/Affirmative Action employer, including protected Veterans and individuals with disabilities.

Staff Manufacturing Engineer At Ortho Development, we help people do what they love by restoring mobility through innovative orthopedic hip and knee solutions. From our headquarters in Draper, Utah, we're proud to provide meaningful work with a strong, collaborative culture where every team member can make a difference. Here, you'll find teammates who care, leadership that listens, and opportunities to learn, grow, and succeed. We offer competitive benefits, a workplace environment designed to help you thrive and promote work-life balance. As a Staff Manufacturing Engineer, you will take ownership of managing and improving manufacturing processes to support operational strategic goals. You will continuously drive to keep assigned manufacturing processes as current and efficient as possible, especially regarding process equipment, systems, and workflow. Additionally, you will Collaborate with suppliers on orthopedic devices to ensure a quality product is delivered, while working collaboratively with design, quality, regulatory, supply chain, etc. This full-time onsite position is available to start immediately and is a great opportunity in the exciting medical device industry. Location: Onsite - Draper, UT Schedule: Monday- Friday Your responsibilities: Responsible for manufacturing processes for orthopedic devices, including procedures, instructions, process validation, supplier qualifications, and monitoring to ensure product consistency and compliance with QMS and standards Modeling skills with experience in solid modeling packages such as CREO, Windchill, SolidWorks, etc. Validation experience i.e., IQ, OQ, PQ requirements Capital equipment purchases utilizing URS, FAT, SAT Identify and implement process improvements to enhance efficiency, reduce costs, and minimize waste Collaborate with R&D for product design, ensuring new devices are designed for manufacturing Ensure manufacturing processes meet applicable FDA, ISO, and other industry standards Partner with Quality to develop and maintain manufacturing quality control processes Coordinate with suppliers for product/material quality and ensure timely deliveries Provide guidance and mentorship to junior manufacturing engineers and production staff, fostering a culture of continuous improvement Lead extensive CapEx projects up to and including facility upgrades and re-location Address non-conformances and CAPAs as needed Perform other job-related duties as assigned Requirements: Bachelor of Science degree in engineering or related field 10+ years experience in Manufacturing Engineering or similar Strong interpersonal skills required in the areas of verbal and written communications, customer focus and professionalism, self-starter Strong listening, questioning, problem-solving and assessment skills Proficient in the use of MS Excel, including pivot tables, vlookups, graphs and macro's is required (Preferred) CAD CAM experience with Creo (Preferred) Knowledge of statistical analysis with MiniTab or other statistical software (Preferred) Training in Lean Six Sigma, Project Management, AutoCAD, GD&T (Preferred) Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Employee discounts Flexible spending account Health insurance Life insurance Paid Holidays Paid time off Parental leave Tuition reimbursement Vision insurance Wellness incentives UTA Transit Pass

**Change the world. Love your job.** A CMP Process Development Engineer is responsible for the development, characterization and optimization of embedded processors to meet the requirements for volume production as part of the Advanced Technology Development team. The ideal candidate will be a technical leader in the area of embedded processors driving the characterization and optimization of the device and process to insure robustness, reliability, and manufacturability meeting all electrical device performance targets. **Responsibilities include:** + Drive process and device improvements through characterization, test, design of experiments, data analysis and simulation + Work with multiple process, integration, reliability, packaging and test engineers to achieve these goals + Work closely with the product groups to identify and optimize the embedded processor performance to meet critical final device parameters to enable game changing products in the market + Compile and evaluate test data to determine appropriate limits and variables for process or material specifications + Conceive and plan projects involving definition and selection of new concepts, equipment, chemistry, automation, or approaches in the development of new processes + Provide technical engineering support in the manufacturing area + Recommend and implement equipment and process modifications to improve production efficiencies, manufacturing techniques, fundamental capabilities and production yields for existing products + Partners with vendors to define and execute on equipment and process development roadmaps The person performing this role must be capable of planning effectively, driving schedules, meeting critical deadlines on multiple tasks in parallel, leading technical discussions in their area of expertise, and working effectively across organizational boundaries. They must be able to clearly communicate project status and actions. Additionally, they must be able to interface with multiple organizations and work well on a diverse team to accomplish goals. **Why TI?** + Engineer your future. We empower our employees to truly own their career and development. Come collaborate with some of the smartest people in the world to shape the future of electronics. + We're different by design. Diverse backgrounds and perspectives are what push innovation forward and what make TI stronger. We value each and every voice, and look forward to hearing yours. Meet the people of TI (*************************************** UI/CandidateExperience/en/sites/CX/pages/4012) + Benefits that benefit you. We offer competitive pay and benefits designed to help you and your family live your best life. Your well-being is important to us. **About Texas Instruments** Texas Instruments Incorporated (Nasdaq: TXN) is a global semiconductor company that designs, manufactures and sells analog and embedded processing chips for markets such as industrial, automotive, personal electronics, communications equipment and enterprise systems. At our core, we have a passion to create a better world by making electronics more affordable through semiconductors. This passion is alive today as each generation of innovation builds upon the last to make our technology more reliable, more affordable and lower power, making it possible for semiconductors to go into electronics everywhere. Learn more at TI.com . Texas Instruments is an equal opportunity employer and supports a diverse, inclusive work environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, disability, genetic information, national origin, gender, gender identity and expression, age, sexual orientation, marital status, veteran status, or any other characteristic protected by federal, state, or local laws. If you are interested in this position, please apply to this requisition. **Minimum requirements:** + Master's degree in Electrical Engineering, Mechanical Engineering, Chemical Engineering, Physics, Material Science, or other related degree + 5 years of experience working on CMP processes + 28nm node semiconductor process experience **Preferred qualifications:** + PhD in Electrical Engineering, Mechanical Engineering, Chemical Engineering, Physics, Material Science, or other related degree + Strongly prefer experience with HKMG CMP, TiN CMP, Poly CMP, CuCMP, and/or NVM like ReRAM/CBRAM/FRAM + Excellent understanding of WLEP systems and demonstrated experience of building white light based endpoints + Demonstrated experience with organic film CMP such as resist and/or BARC + Working knowledge of advanced CMOS device physics and reliability mechanisms in advanced logic and CMOS technologies + Experience across multiple 300mm CMP platforms + Experience driving vendor engagement to leverage best in class tool and chemistry needs + Previous direct R&D experience in 300mm semiconductors + Device physics training with understanding of materials and electrical test characterization + Ability to establish strong relationships with key stakeholders critical to success, both internally and externally + Strong verbal and written communication skills + Ability to quickly ramp on new systems and processes + Demonstrated strong interpersonal, analytical and problem-solving skills + Ability to work in teams and collaborate effectively with people in different functions + Ability to take the initiative and drive for results + Strong time management skills that enable on-time project delivery **ECL/GTC Required:** Yes

T&D Standards-Engineer(I, II, Sr, SrII, Principal) Salt Lake City, UT #112594 Job Details | PacifiCorp By continuing to use this website you consent to our use of cookies Accept Close Skip to main content * Stay Connected * View All Careers * Why PacifiCorp * Benefits * Inclusion & Belonging * Employee Safety * Required Notifications * Our Workplace and Our Industry * Veterans * Early Careers & Apprenticeships Search by Keyword Search by Location * Stay Connected * View All Careers * Why PacifiCorp * Benefits * Inclusion & Belonging * Employee Safety * Required Notifications * Our Workplace and Our Industry * Veterans * Early Careers & Apprenticeships View Profile Search by Keyword Search by Location Select how often (in days) to receive an alert: Create Alert × Select how often (in days) to receive an alert: T&D Standards-Engineer(I, II, Sr, SrII, Principal) Salt Lake City, UT #112594 Apply now " Date: Jan 11, 2026 Location: SALT LAKE CITY, UT, US, 84116 Company: PacifiCorp POWER YOUR GREATNESS PacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability and diversity, equity and inclusion. General Purpose Create, revise, and update engineering standard that affect all levels of distribution systems design for the company. Work with other internal groups to technically evaluate external suppliers and manufacturers, and their material to ensure material integrity and reliability. Offer specialized expertise in interpreting relevant federal, state and governing body (e.g. NESC) regulations, as well as expertise in material failure modes and the inspection and troubleshooting techniques used to detect them. * This role may involve up to 10% travel. Responsibilities * Support procurement in efforts to increase material redundancy and resolve material shortages. * Collaborate directly with suppliers to foster strong business relationships. * Evaluate suppliers' ability to manufacture material effectively and reliably. * Review manufacturer drawings to ensure that they conform to internal specifications and standards. * Develop and maintain publications describing material, material specifications and installation of material. * Ensure that all publications and materials comply with all applicable federal, state, and governing body (e.g. NESC) regulations and requirements. * Lead or assist in investigations into equipment failures, ensuring root causes are identified and necessary corrective actions are implemented to prevent future failures. * Pursue, analyze, pilot, and review new technologies for the purpose of cost reduction, reliability improvement and wildfire mitigation. * Provide field support to address issues related to equipment, standards, and compliance. * Collaborate with field teams to resolve technical challenges and ensure safe and efficient operation. * Review joint use applications, pole sizing requests. * Provide recommendations for the use of material based on specific applications. Requirements for the position, at Engineer I level, include the following: * Bachelor's degree in engineering from an accredited college/university. * Understanding of the role of governing body rules, regulations, and requirements in engineering standards. * Understanding of the benefit of recognizing material failure modes and their detection. * A fundamental understanding of civil, , transmission, and distribution system layouts, including their key constituent components. * Understanding the role of troubleshooting distribution, transmission outages, with respect to material failures. * Demonstrated communication and interpersonal skills involving the ability to work cross-functionally to understand requirements, present alternatives, and recommendations. * Demonstrated ability to communicate technical information effectively to a group of peers. * Demonstrated ability to remain calm in potentially charged conversations. * Demonstrated ability to successfully research information not currently existing in organization. * Fundamental understanding of wildfire mitigation technologies, strategies, and solutions. Additional Requirements for Engineer II level, include the following: * Demonstrated ability to find effective solutions to problems. * Fundamental understanding of pertinent governing body rules, regulations, and requirements like NESC, GO 95, IEEE, ASTM, ASCE, as they relate to material, material installation, and procedures. * Ability to identify material failure modes in 25% of the material in area of responsibility and how to detect them, both before and after failure. * A minimum of two years of experience in designing transmission, and distribution systems, or related professional experience. * A minimum of two years of experience applying troubleshooting techniques to address material-related distribution, transmission outages. * Ability to communicate technical information effectively and persuasively to larger internal groups. * A minimum of two years of experience in designing with, or the use of, wildfire mitigation technologies, strategies, and solutions. Additional Requirements for Senior Engineer level, include the following: * Ability to research and efficiently identify applicable governing body rules, regulations, and requirements such as NESC, GO 95, IEEE, ASTM, ASCE, as they relate to material, material installation, and procedures. * Ability to identify material failure modes in 50% of the material in area of responsibility and how to detect them, both before and after failure. * A minimum of four years of experience in designing transmission, and distribution systems, or related professional experience. * A minimum of four years of experience applying troubleshooting techniques to address material-related distribution, transmission outages. * Ability to communicate technical information effectively and persuasively in presentation format to larger external groups, including people with a less technical background. * A minimum of four years of experience in designing with, or the use of, wildfire mitigation technologies, strategies, and solutions. Additional Requirements for Senior II Engineer level, include the following: * Ability to competently identify and interpret applicable governing body rules, regulations, and requirements such as NESC, GO 95, IEEE, ASTM, ASCE, as they relate to material, material installation, and procedures. * Ability to identify material failure modes in 75% of the material in area of responsibility and how to detect them, both before and after failure. * A minimum of six years of experience in designing transmission, and distribution systems, or related professional experience. * A minimum of six years of experience applying troubleshooting techniques to address material-related distribution, transmission outages. * Ability to communicate technical information effectively and persuasively to company executives. * A minimum of six years of experience in designing with, or the use of wildfire mitigation technologies, strategies, and solutions. Additional Requirements for Principal level, include the following: * Expert ability to identify and interpret applicable governing body rules, regulations, and requirements such as NESC, GO 95, IEEE, ASTM, ASCE, as they relate to material, material installation, and procedures. * Ability to identify material failure modes in all the material in area of responsibility and how to detect them, both before and after failure. * A minimum of ten years of experience in designing distribution or transmission systems, or related professional experience. * A minimum of ten years of experience troubleshooting distribution or transmission outages, with respect to material failures. * A minimum of ten years of experience in the use of wildfire mitigation technologies, strategies, and solutions. Preferences * Project Management Professional (PMP) designation. * Advanced degree in EE or ME with emphasis on power. * Professional Engineering License Additional Information Req Id: 112594 Company Code: Pacificorp Primary Location: SALT LAKE CITY Department: Power Delivery Schedule: Days Personnel Subarea: Exempt Hiring Range: $77,200-$161,370 This position is eligible for an annual discretionary performance incentive bonus of up to 12.00% of salary. Benefits: Health care, retirement, paid time off, tuition assistance, paid short-term and long-term disability, paid bereavement leave. For more information, please visit: ********************************************************************** Employees must be able to perform the essential functions of the position with or without an accommodation. At PacifiCorp, we celebrate diversity, equity and inclusion. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. While marijuana is legal in several states, including Oregon, a positive test for positions in Oregon may disqualify a candidate. The company complies with the laws of Washington and California and only obtains and considers positive tests for marijuana in safety-sensitive positions or those covered by U.S. Department of Transportation regulations. Nearest Major Market: Salt Lake City

Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Overview Help Accepting applications Open & closing dates 12/22/2025 to 12/21/2026 Salary $63,795 to - $164,301 per year Pay scale & grade GS 11 - 15 Locations Few vacancies in the following locations: Eielson AFB, AK Elmendorf AFB, AK Fort Richardson, AK Maxwell AFB, AL Show morefewer locations (79) Little Rock AFB, AR Davis Monthan AFB, AZ Luke AFB, AZ Beale AFB, CA Edwards AFB, CA El Segundo, CA Los Angeles, CA March AFB, CA Travis AFB, CA Vandenberg AFB, CA Air Force Academy, CO Buckley AFB, CO Cheyenne Mountain AFB, CO Colorado Springs, CO Peterson AFB, CO Schriever AFB, CO Joint Base Anacostia-Bolling, DC Dover AFB, DE Cape Canaveral, FL Cape Canaveral AFS, FL Eglin AFB, FL Homestead AFB, FL Hurlburt Field, FL MacDill AFB, FL Patrick AFB, FL Tyndall AFB, FL Dobbins AFB, GA Moody AFB, GA Robins AFB, GA Hickam AFB, HI Mountain Home AFB, ID Scott AFB, IL Grissom AFB, IN Barksdale AFB, LA Hanscom AFB, MA Westover Air Reserve Base, MA Andrews AFB, MD Linthicum Heights, MD Selfridge ANG Base, MI Whiteman AFB, MO Columbus AFB, MS Keesler AFB, MS Malmstrom AFB, MT Grand Forks, ND Minot AFB, ND Offutt AFB, NE New Boston, NH McGuire AFB, NJ Cannon AFB, NM Holloman AFB, NM Kirtland AFB, NM Nellis AFB, NV Niagara Falls, NY Wright-Patterson AFB, OH Youngstown, OH Youngstown, OH Altus AFB, OK Tinker AFB, OK Vance AFB, OK Charleston, SC Shaw AFB, SC Arnold AFB, TN Dyess AFB, TX Fort Sam Houston, TX Goodfellow AFB, TX Kelly AFB, TX Lackland AFB, TX Laughlin AFB, TX Randolph AFB, TX Hill AFB, UT Alexandria, VA Arlington, VA Dahlgren, VA Fort Eustis, VA Langley AFB, VA Pentagon, Arlington, VA Fairchild AFB, WA McChord AFB, WA Warren AFB, WY Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Multiple Work schedule Full-time Service Competitive Promotion potential 15 Job family (Series) * 0855 Electronics Engineering Supervisory status No Security clearance Secret Drug test No Position sensitivity and risk Noncritical-Sensitive (NCS)/Moderate Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number AFPCDHA-12857056-0855-CYBER Control number 852987000 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency This public notice is to gather applications that may or may not result in a referral or selection. Duties Help * Duties and responsibilities vary and may increase according to grade level * Use engineering manuals, standard publications, and technical material to obtain information and pertinent data for use by higher level engineers, contractors and/or customers. * Keep abreast of emerging technologies and professional developments to maintain currency in the field and for application to work assignments. * Perform duties in support of the installation, operations, and maintenance of weapon systems, subsystems, facilities, machinery, and/or support equipment. * Perform developmental assignments in the application of established principles, techniques, methods, and procedures of professional electronics engineering in the area of installation, operations, and maintenance. Requirements Help Conditions of employment * Please read this Public Notice in its entirety prior to submitting your application for consideration. * U.S. Citizenship is required * Males must be registered for Selective Service, see *********** * Total salary varies depending on location of position * If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: ***************************************** * Recruitment incentives may be authorized * Position may be subject to random drug testing * Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays * Shift work and emergency overtime may be required * Employee must maintain current certifications * A security clearance may be required * Disclosure of Political Appointments * Full/part-time employees occupying direct childcare positions are eligible for discounts IAW DAF AFSVC/CC Memo, 30 Sep 22; first child 100% / each additional child 25%. Other assigned CYP and FCC personnel are eligible for 25% discount. Qualifications BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: GS-11: At least one year of specialized experience equivalent to at least the GS-09 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Modeling and simulation professional theories, concepts, principles, techniques, and practices of computer engineering, electronics engineering and/or computer science. GS-12: At least one year of specialized experience equivalent to at least the GS-11 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Leading and/or performing engineering work involving electronic circuits, circuit elements and equipment systems; applying a number of diverse electronics engineering practices, techniques and processes to identify and resolve complex engineering issues; supporting the planning, testing and troubleshooting of electronics engineering systems or devices; and, developing computer aided engineering analysis and tools in support of planning and designing applications. GS-13: At least one year of specialized experience equivalent to at least the GS-12 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-14: At least one year of specialized experience equivalent to at least the GS-13 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-15: At least one year of specialized experience equivalent to at least the GS-14 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): * Knowledge of electronics engineering concepts, principles, methods, techniques, and standard engineering practices to perform moderately difficult or relatively limited phases of a larger and more complex installation, operations, and maintenance engineering project. * Knowledge of computer aided design and drafting (CADD) programs to perform design and drafting assignments, as well as other computer applications used in support of plans, analysis, and project reports. * Skill in applying the principles, concepts, and practices of the occupation sufficient to perform limited assignments in the field of electronics engineering. * Ability to communicate factual and procedural information clearly, orally and in writing. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. Additional information For Direct Hire (DHA) Positions: This is a Direct Hire Public Notice, under this recruitment procedure applications will be accepted for each location/ installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application. Interagency Career Transition Assistance Program (ICTAP): For information on

Dennis Group's Process Engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities Developing process design basis and select unit operations Develop operation specifications Coordinate with other project disciplines (engineers, designers, architects, etc.) Preparing process flow and piping and instrumentation diagrams Create process flow diagrams Preparing mass and energy balances Sizing and specification of process and process utility equipment Equipment procurement and bid evaluation Assisting project management with the development of project scope, budget and schedule for all process related work Helping to coordinate the schedules and work of contractors for process equipment installation Prepare preliminary sub-contractor scope of work Work with clients, vendors, and suppliers to develop cost estimates and proposals Write proposals, negotiate agreements, trouble-shoot client issues Update drawings provided by senior engineers to verify corrections Compile information for client presentations, shop drawings review, and contract administration for the design of power, process, pipeline, etc. Take on lead process engineer on specific projects and be the client main process point of contact Generate requirements for equipment performance Collaborates with Project Management, design team, CAD department, vendors and clients to determine needs and solutions for continuous processing/ packaging systems and to develop specifications. Provide client assumptions on supply recommendations Develop process and instrumentation drawings (P&IDs) and create review of layout drawings Overseeing process and utility equipment installations Provide onsite construction start-up and commissioning support Perform onsite audits and surveys of the facilities and equipment Researching processing engineering best practices Supporting talent growth within our organization Provide coaching and/or mentoring to a subordinate group when directed by supervisor. Required Education Skills and Experience Bachelor's degree in chemical or process engineering. 4-7 years of work experience developing process designs for food and beverage processing facilities 4-7 years of work experience preparing process flow diagrams and P&IDs 4-7 years of work experience sizing and specification of process and process utility equipment. 4-7 years of work experience developing project scope, budget and process related work schedules Work experience with professional services, process engineering, and food and beverage firms is a plus Interest in food safety and sanitary design principles and a desire learn about various food and beverage industry standards, practices, and regulations Proficiency with MS Office, MS Project, and AutoCAD Excellent oral and written communication skills with proven client interaction and experience Must meet Travel Requirement - On-site construction project coordination and management with travel requirements between 30-50% of the year Physical Requirements Prolonged periods sitting at a desk and working on a computer. Must be able to lift-up to 15 pounds at times. Travel Requirement Up to 50% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we've focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn't one thing we do, it's all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics. JOB CODE: 1002679

Job Description Ability to work well with others in a team setting. Ability to conduct complex statistical, geometric, and mathematical calculations. Ability to conduct responsibilities substantially free from routine supervision. Ability to read, understand, create engineering drawings on common engineering software. Ability to work efficiently on common personal computer hardware and software. Proficient in Microsoft Office applications Demonstrate a primary commitment to patient safety, product quality and compliance with the , Quality Manual and its governing regulations. Document and improve manufacturing processes and operations that control the safety and efficacy of finished devices. Conduct qualification, verification, and validation activities for the production of medical devices Analyze, troubleshoot and resolve issues relating to the safety, efficacy, quality, cost, or delivery of components and finished devices. Complete engineering work and contribute to new product development teams and product support, typically including the following activities: technology development, test of materials or products, preparation of specifications, Six Sigma, process study, process improvements, and report preparation. Develop manufacturing equipment in compliance with manufacturing safety (e.g., OSHA & EPA) principles. Design, procure, and fabricate tooling and fixtures. Participate in design control efforts related to risk analysis (FMEA) & design reviews. Preferred: Source component and service suppliers; assess supplier capability and effectiveness. Train, develop, and/or provide work direction to operators and technicians. Participate in the identification, implementation, and management of production goals. Participate on cross-functional project teams. Coordinate, manage, and document project work and progress, and recommend appropriate revisions. Design and coordinate engineering tests and experiments. Analyze data, draw conclusions, and summarize test results. Communicate results to manager. Interfaces with product builders or extrusion technicians, production supervisors, and engineers in troubleshooting problems on the production floor. Participates in project teams typically including one of the following: Identifying and implementing process/product improvement alternatives to increase/optimize yield, efficiency, throughput, and/or performance. Designing, performing, and documenting engineering test experiments to evaluate product/process performance. Designing, developing, testing, and validating equipment and processes; analyzing and interpreting process models and recommending process improvements. Evaluating external process technologies. Coordinates with the appropriate suppliers and other external resources needed in developing and implementing process/product improvement plans. Participates in project planning and scheduling. Attends and contributes to production core team meetings.

Process Engineer BH Job ID: 3643 SF Job Req ID: 16715 Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Process Engineer Location: Salt Lake City, UT About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: The Process Engineer is primarily responsible for supporting existing business needs by developing new and improved processes, tooling, and manufacturing concepts, and identifying cost savings projects. Process Engineers provide training to new operators and provide technical assistance and support to the manufacturing department as necessary. The ideal candidate will be actively involved in the day-to-day operations, including working on the cleanroom floor, driving technical projects, and making hands-on improvements to our processes and equipment. Responsibilities: * Improves manufacturing efficiency, production yields, product quality, and consistency through equipment and product design modifications and fabrication. * Completes projects, report status, and document lessons learns efficiently. Utilizes project management tools in establishing timelines, building action item lists, assigning responsibility, completing dates, and achieving milestones. * Responsible for all aspects of process validation, including IQ, OQ, and PQ for all equipment, tooling, and processes. * Assists with equipment design and finalizes manufacturing methods for producing medical devices and components. * Analyzes and documents test results for development and pilot production runs. * Collaborates with new product introduction teams to ensure seamless implementation of new process flows and will assist with transfer activities. * Develops/improved processes, sampling activities, and as well as tooling and manufacturing concepts that will meet customer expectations on cost, quality, and delivery. * Provides technical assistance and engineering support to the manufacturing floor in ensuring the production of quality products. Works with other support departments to maintain on-time delivery goals. * Leads process improvement and waste elimination efforts through the application of lean principles and actively participate in continuous improvement events. * Works with Quality Control team to generate, update and implement all project-related documentation including control plans, work instructions, manufacturing procedures, sample requests, process guides, and troubleshooting guides. * Other duties as assigned * Demonstrates all corporate values * We think and act like owners. * We are bold in our aspirations while moving forward with humility and integrity. * We are committed to making our customers successful. * We foster inspired teams. Requirements: * Bachelors in Engineering or a similar related field. * 2+ years of engineering experience within medical device. * Experience in Microsoft Word, Excel, PowerPoint, and Minitab (or other statistical analysis software). Core Competencies: * Analytical and problem-solving skills. * Motivated. * Creative. * Work well under pressure and operate effectively in a fast-paced team environment. * Excellent interpersonal skills and the ability to communicate needs and demands effectively. * Detail-oriented, focused, and able to produce accurate and professional documents. Preferences: * Experience with SolidWorks or CAD modeling software. Travel & Work Arrangements/Requirements: * Onsite. What We Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit *************

Come Join Our Team! At Petersen our team members are not just employees they are members of the Petersen/Precinmac community. We recognize that a company is only as good as it's team members and ours are incredible! Petersen offers a competitive benefits package which includes 4x10 work schedule, food market breakrooms. Competitive wage, quarterly bonuses, referral bonuses for selected positions. wellness program, medical, dental, vision, disability, life, 401k with employer match. Paid time off, and holiday pay. On the job training programs and training reimbursement. We also offer multiple employee engagement activities and community events. Process Engineer Farr West, UT Job Summary: This person has the primary responsibility to review customer requirements and translate those requirements into work orders. Material requirements and manufacturing instructions following established procedures and work instructions will be defined in these work orders. This person is also responsible to develop the quality plan for each work order. In addition, the position is responsible to prepare cost estimates for incoming customer requests. Essential Functions: Timely completion of quotations, routings, disposition of Non-Conformances, and process work orders within cost estimates. Provide shop support as required. Provide leadership and training when necessary. Duties: Complete estimates using Petersen Inc. ERP system. Communicate material and subcontract requirements and obtain quotations from Purchasing department. Conduct contract review of technical requirements versus quotation. Complete manufacturing and quality planning for projects using the ERP system to create the router. Maintain part hierarchy and drawing/revision number documentation. Provide technical support for Sales, customers, manufacturing, and purchasing. Complete disposition, root cause analysis and corrective actions as necessary for non-conformances. When required, report to the customer. Create 3D models, fixture drawings, process drawings, weld maps, and inspection data checklists. Review and disposition Engineering Change Requests Conduct job release and post job review meetings. Participate in and/or conduct Continuous Improvement/Productivity activities with manufacturing personnel. Review Customer Change Requests, evaluate to determine cost and delivery impact. Availability: Must maintain regular and acceptable attendance at such level as is determined in the employer's sole discretion. Must be available and willing to work overtime as the employer determines is necessary or desirable to meet its business needs. Knowledge, Skills: General knowledge of blueprint reading and drafting skill, including basic GD&T. Excellent computer skills with experience in one or more of the following programs: SolidWorks, Bluebeam, Microsoft Office, and ERP Systems. Effective math skills including algebra, trigonometry, and geometry. General knowledge of machining and fabrication processes and capabilities. Experience and Education: Minimum of 10 years related work experience. B.S. degree in Mechanical Engineering, Mechanical Engineering Technology, or related engineering field preferred. Travel: Must be available and willing to travel as Petersen determines necessary or desirable to meet business needs. Working Conditions: Normally works in an office. Occasionally, the employee is subject to: Shop floor environment. High noise levels from operating machines. Physical hazards from moving equipment and production components. Breathing fumes, dust, and mist. Skin exposure to oils and cutting fluids. Welding flash. Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time Petersen is proud to be an Equal Opportunity, Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability, or veteran status. If you are unable to complete this application due to a disability, contact Petersen at ************ to ask for an accommodation or an alternative application process. Day Shift: Mondays thru Thursdays 6:00am-5:00pm

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Join Northrop Grumman on our continued mission to push the boundaries of possible across land, sea, air, space, and cyberspace. Enjoy a culture where your voice is valued and start contributing to our team of passionate professionals providing real-life solutions to our world's biggest challenges. We take pride in creating purposeful work and allowing our employees to grow and achieve their goals every day by Defining Possible. With our competitive pay and comprehensive benefits, we have the right opportunities to fit your life and launch your career today. Northrop Grumman Defense Systems is seeking Manufacturing Engineer. This position will be located in Roy, UT and will support the Sentinel program. Join the C&L MFG Engineering team for Sentinel and take part in engineering solutions to deploy and deliver a state-of-the-art weapon system to our customer. This position requires a highly motivated self-starter with knowledge in the fabrication, assembly, system integration, deployment, supply chain, and design of engineering products. The candidate will be involved in all engineering activities supporting the deployment of critical systems for the Sentinel program. This includes, but is not limited to, working with suppliers to develop a compliant Manufacturing Plan, conducting Manufacturing Readiness Assessment (MRA) events, Bill of Materials creation, developing work and installation instructions, supporting system design, and to-field kitting. The candidate will demonstrate exceptional organizational and interpersonal skills, capable of working a variety of tasks in a proactive manner, can task orient, and communicate effectively with varying levels of Government, NGC, and Supplier personnel. Job Responsibilities: • Develop processes by studying requirements; research, design, modify, and test production/deployment methods and equipment • Collaborates with Design Engineering on design to ensure practical manufacturing and fabrication solutions • Work with suppliers to develop manufacturing planning for successful preparation and execution of MRAs • Research and evaluate commercially available tools and equipment to support deployment activities • Investigates root cause of discrepancies and implements corrective actions • Troubleshoots existing processes to improve safety, quality, cost, and efficiency • Establish and maintain a program project plan and schedule that is aligned with the program Integrated Master Schedule (IMS) • Provides advanced technological ideas and Subject Matter Expertise (SME) to resolve technical questions and ensure compliance to the Engineering and Manufacturing Development (EMD) Statement of Work (SOW) requirements • Implement Lean practices to continually identify opportunities for improvement Position Benefits: As a full-time employee of Northrop Grumman Space Systems, you are eligible for our robust benefits package including: • Medical, Dental & Vision coverage • 401k • Educational Assistance • Life Insurance • Employee Assistance Programs & Work/Life Solutions • Paid Time Off • Health & Wellness Resources • Employee Discounts This position's standard work schedule is a 9/80. The 9/80 schedule allows employees who work a nine-hour day Monday through Thursday to take every other Friday off. This role may offer a competitive relocation assistance package. Basic Qualifications: • Bachelor's degree with a minimum of 2 years of experience, or 0 years with a Masters; 4 years additional experience may be considered in lieu of a degree • Must be a U.S. Citizen with an active U.S. DoD Secret Security Clearance or higher awarded or reviewed in the last 6 years at time of application, with an ability to obtain and maintain Special Access Program (SAP) approval within a reasonable period of time, as determined by the company to meet its business need • Experience with Design Reviews, Process Control Documentation, Work Instructions, and Bills of Materials • Experience with Mechanical/Electrical Drawings • Experience with Siemens NX/CPLM or similar tools • Experience using Microsoft Office Products (Word, PowerPoint, Excel, MS-Project) Preferred Qualifications: • Bachelor's and/or Master's degree in an engineering discipline such as Mechanical, Electrical, Manufacturing, Aerospace, etc. • Experience deploying engineering solutions to the field • Previous experience in production for a military program • Previous experience on EMD projects • Experience with Inter Continental Ballistic Missiles (ICBM) • An understanding of Manufacturing Readiness Assessment's and establishing Manufacturing Readiness Levels per DoD customer requirements • Prior experience developing and designing tooling for field work and installations • An understanding of tooling, work instructions, and visual aid Primary Level Salary Range: $70,200.00 - $105,400.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Chemical Engineer About the Job Thatcher Company is seeking a Chemical Engineer to join our engineering team in Salt Lake City, Utah. In this role, you will provide process engineering and technical support to plant operations, capital projects, and other teams. You will work closely with operations and the business team to identify process improvement opportunities, implement plant improvement projects, and drive innovative solutions. What You Will Do * Promote understanding and application of safety practices. * Optimize plant production and efficiency by the implementation of improvement opportunities and management of process constraints. * Work with operations and manufacturing experts to resolve technical issues. * Develop and maintain process documentation and safety information such as P&IDs, material balances, equipment datasheets, process line sizing calculations, hydraulic calculations, and datasheets for instruments and relief devices. * Contribute to process safety and environmental performance through participation in process hazards analysis (PHA), management of changes (MOC), and incident investigation. * Manage small capital projects from design through startup.

**Change the world. Love your job** In your first year with TI, you will participate in the Career Accelerator Program (CAP), which provides professional and technical training and resources to accelerate your ramp into TI, and set you up for long-term career success. Within this program, we also offer function-specific technical training and on-the-job learning opportunities that will encourage you to solve problems through a variety of hands-on, meaningful experiences from your very first day on the job. The TMG Development program is a 12-month program for new college graduates in the TMG organization. **About the job:** In this role, you will provide analyses of end of line probe/test, parametric, and process data to source yield and qual limiting issues on new products in the technology development phase. You will take the results of these analyses to fab, design, integration, and product teams to drive issues to solution. You will also participate in efforts to speed up analysis efficiency through scripting, dashboards creation, modeling, and advanced analytical techniques. You will be required to understand the details of electrical testing, parametric and fab data to effectively develop failure models. Creativity in developing new analytical tools and machine/deep learning methods to improve efficiency and accuracy is needed. Responsibilities also include leading and coordinating cross-functional teams to solve complex, multi-faceted issues. The person performing this role must be capable of planning effectively, driving schedules, meeting critical deadlines on multiple tasks in parallel, leading technical discussions in their area of expertise, and work effectively across organizational boundaries. They must be able to clearly communicate project status and actions. Additionally, they must be able to interface with multiple organizations and work well on a diverse team to accomplish goals. **Why TI?** + Engineer your future. We empower our employees to truly own their career and development. Come collaborate with some of the smartest people in the world to shape the future of electronics. + We're different by design. Diverse backgrounds and perspectives are what push innovation forward and what make TI stronger. We value each and every voice, and look forward to hearing yours. Meet the people of TI (*************************************** UI/CandidateExperience/en/sites/CX/pages/4012) + Benefits that benefit you. We offer competitive pay and benefits designed to help you and your family live your best life. Your well-being is important to us. **About Texas Instruments** Texas Instruments Incorporated (Nasdaq: TXN) is a global semiconductor company that designs, manufactures and sells analog and embedded processing chips for markets such as industrial, automotive, personal electronics, communications equipment and enterprise systems. At our core, we have a passion to create a better world by making electronics more affordable through semiconductors. This passion is alive today as each generation of innovation builds upon the last to make our technology more reliable, more affordable and lower power, making it possible for semiconductors to go into electronics everywhere. Learn more at TI.com . Texas Instruments is an equal opportunity employer and supports a diverse, inclusive work environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, disability, genetic information, national origin, gender, gender identity and expression, age, sexual orientation, marital status, veteran status, or any other characteristic protected by federal, state, or local laws. If you are interested in this position, please apply to this requisition. **Minimum requirements:** + Masters in Electrical Engineering, Electrical and Computer Engineering or related field + Minimum cumulative GPA of 3.0/4.0 **Preferred qualifications:** + Knowledge of Wafer fabrication, Semiconductor Device Physics, Circuit Analysis + Knowledge of Data Analysis, Big Data Analytics, Machine/Deep Learning + Programming knowledge is a plus (Python preferred) + Knowledge of Embedded Systems, SRAM, Flash, Digital and Analog Systems is a plus + Strong verbal and written communication skills + Demonstrated strong analytical, critical thinking, and problem-solving skills + Ability to work in teams and collaborate effectively with people in different functions + Ability to take the initiative and drive for results + Strong time management skills that enable on-time project delivery + Ability to work effectively in an interrupt-driven, fast-paced and rapidly changing environment + Demonstrated ability to build strong, influential relationships + Problem solving skills, including meticulous attention to details + Ability to communicate effectively across functional boundaries and with upper management + Ability to work in stressful situations and arrive at creative and effective solutions + Ability to think strategically **ECL/GTC Required:** Yes

Dennis Group's process engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities Execute all tasks necessary to complete the engineering on a project for design through execution with minimal support Developing process design basis and select unit operations Develop operation specifications Coordinate with other project disciplines (engineers, designers, architects, etc.) Preparing process flow and piping and instrumentation diagrams Create process flow diagrams Preparing mass and energy balances Sizing and specification of process and process utility equipment Equipment procurement and bid evaluation Assisting project management with the development of project scope, budget and schedule for all process related work Helping to coordinate the schedules and work of contractors for process equipment installation Prepare preliminary sub-contractor scope of work Work with clients, vendors, and suppliers to develop cost estimates and proposals Write proposals, negotiate agreements, trouble-shoot client issues Update drawings provided by senior engineers to verify corrections Compile information for client presentations, shop drawings review, and contract administration for the design of power, process, pipeline, etc. Take on lead process engineer on specific projects and be the client main process point of contact Generate requirements for equipment performance Collaborates with Project Management, design team, CAD department, vendors and clients to determine needs and solutions for continuous processing/ packaging systems and to develop specifications. Provide client assumptions on supply recommendations Develop process and instrumentation drawings (P&IDs) and create review of layout drawings Overseeing process and utility equipment installations Provide onsite construction start-up and commissioning support Perform onsite audits and surveys of the facilities and equipment Researching processing engineering best practices Supporting talent growth within our organization Assists with interviewing and hiring new team members Handle complex issues and tasks with minimal supervision and advise subordinate team members on solutions to issues they encounter. Provide coaching and/or mentoring to a subordinate group when directed by supervisor. Required Education Skills and Experience Bachelor's degree in chemical or process engineering. 8-11 years of work experience developing process designs for food and beverage processing facilities 8-11 years of work experience preparing process flow diagrams and P&IDs 8-11 years of work experience sizing and specification of process and process utility equipment. 8-11 years of work experience developing project scope, budget and process related work schedules Work experience with professional services, process engineering, and food and beverage firms is a plus Interest in food safety and sanitary design principles and a desire learn about various food and beverage industry standards, practices, and regulations Proficiency with MS Office, MS Project, and AutoCAD Excellent oral and written communication skills with proven client interaction and experience Must meet Travel Requirement - On-site construction project coordination and management with travel requirements between 30-50% of the year Physical Requirements Prolonged periods sitting at a desk and working on a computer. Must be able to lift-up to 15 pounds at times. Travel Requirement Up to 50% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we've focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn't one thing we do, it's all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics. JOB CODE: 1002583

Change the world. Love your job. A CMP Process Development Engineer is responsible for the development, characterization and optimization of embedded processors to meet the requirements for volume production as part of the Advanced Technology Development team. The ideal candidate will be a technical leader in the area of embedded processors driving the characterization and optimization of the device and process to insure robustness, reliability, and manufacturability meeting all electrical device performance targets. Responsibilities include: Drive process and device improvements through characterization, test, design of experiments, data analysis and simulation Work with multiple process, integration, reliability, packaging and test engineers to achieve these goals Work closely with the product groups to identify and optimize the embedded processor performance to meet critical final device parameters to enable game changing products in the market Compile and evaluate test data to determine appropriate limits and variables for process or material specifications Conceive and plan projects involving definition and selection of new concepts, equipment, chemistry, automation, or approaches in the development of new processes Provide technical engineering support in the manufacturing area Recommend and implement equipment and process modifications to improve production efficiencies, manufacturing techniques, fundamental capabilities and production yields for existing products Partners with vendors to define and execute on equipment and process development roadmaps The person performing this role must be capable of planning effectively, driving schedules, meeting critical deadlines on multiple tasks in parallel, leading technical discussions in their area of expertise, and working effectively across organizational boundaries. They must be able to clearly communicate project status and actions. Additionally, they must be able to interface with multiple organizations and work well on a diverse team to accomplish goals. Minimum requirements: Master's degree in Electrical Engineering, Mechanical Engineering, Chemical Engineering, Physics, Material Science, or other related degree 5 years of experience working on CMP processes 28nm node semiconductor process experience Preferred qualifications: PhD in Electrical Engineering, Mechanical Engineering, Chemical Engineering, Physics, Material Science, or other related degree Strongly prefer experience with HKMG CMP, TiN CMP, Poly CMP, CuCMP, and/or NVM like ReRAM/CBRAM/FRAM Excellent understanding of WLEP systems and demonstrated experience of building white light based endpoints Demonstrated experience with organic film CMP such as resist and/or BARC Working knowledge of advanced CMOS device physics and reliability mechanisms in advanced logic and CMOS technologies Experience across multiple 300mm CMP platforms Experience driving vendor engagement to leverage best in class tool and chemistry needs Previous direct R&D experience in 300mm semiconductors Device physics training with understanding of materials and electrical test characterization Ability to establish strong relationships with key stakeholders critical to success, both internally and externally Strong verbal and written communication skills Ability to quickly ramp on new systems and processes Demonstrated strong interpersonal, analytical and problem-solving skills Ability to work in teams and collaborate effectively with people in different functions Ability to take the initiative and drive for results Strong time management skills that enable on-time project delivery

Dennis Group's Process Engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process Engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities Develop process design basis and select unit operations Develop operation specifications Coordinate with other project disciplines (engineers, designers, architects, etc.) Prepare process flow and piping and instrumentation diagrams Create process flow diagrams Prepare mass and energy balances Size and specify process and process utility equipment Equipment procurement and bid evaluation Assist project management with the development of project scope, budget and schedule for all process related work Help to coordinate the schedules and work of contractors for process equipment installation Work with clients, vendors, and suppliers to develop cost estimates and proposals Provide client assumptions on supply recommendations Develop process and instrumentation drawings (P&IDs) Oversee process and utility equipment installations Provide onsite construction start-up and commissioning support Research process engineering best practices Supporting talent growth within our organization Required Education Skills and Experience Bachelor's degree in Chemical or Process Engineering. 0-3 years of work experience or schooling developing process designs 0-3 years of work experience or schooling preparing process flow diagrams and P&IDs 0-3 years of work experience or schooling sizing and specifying process and process utility equipment. 0-3 years of work experience or schooling developing project scopes, budgets and process-related work schedules Co-op, intern or work experience with professional services, process engineering, and food and beverage firms is a plus Interest in food safety and sanitary design principles and a desire learn about various food and beverage industry standards, practices, and regulations Proficiency with MS Office, MS Project, and AutoCAD Excellent oral and written communication skills with proven client interaction and experience Must meet Travel Requirement - On-site construction project coordination and management with travel requirements between 30-50% of the year Physical Requirements Prolonged periods sitting at a desk and working on a computer. Must be able to lift-up to 15 pounds at times. Travel Requirement Up to 50% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we've focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn't one thing we do, it's all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics. JOB CODE: 1002539