AEC Resource jobs in Minneapolis, MN

60%: CDL Driver: Operates company toters to transport products to and from specified locations. Works directly with consumers. Other duties may be assigned based on business needs of location. DOT certification required or attainable. 40%: Installation: Installation & anchoring of units. Pick up units to be returned to the branch. Essential Duties and Responsibilities: CDL Driver: Responsible for ensuring truck is loaded properly. Responsible for weight of shipment. Monitor and evaluate daily load schedule. Coordinate with other drivers Ensure truck is current and proper on all inspection criteria. Comply with all DOT requirement Record completely and accurately all timesheets and loads hauled/transferred completely and accurately. Report all loads to supervisor daily. Maintain truck in good working order. Daily fill out Driver's Vehicle Inspection Report per DOT regulations. Daily fill out Vehicle Inspection Report and Driver's Daily Log and forward to Supervisor at end of day per DOT regulations. Assist work in yard as required by supervisor. Perform other duties as assigned. Installation: Install and anchor modular buildings and mobile trailers at customer location Retrieve modular buildings and mobile trailers from customer locations and return to yard. Performs other duties as required Required Skills and Qualifications: Class “A” Commercial Driver's License required. Clean MVR required. Ability to pass required background checks Education & Experience Requirements: High school diploma or equivalent. Twelve (12) months commercial driving experience required within the last three (3) years. Experience working in multiple climates including extensive snow, ice, heat, and rain. Basic mechanical skills to work on trucks Average ability to read and write to read location directions and prepare tickets and reports accurately. Good organizational skills Demonstrated knowledge and skills Physical/Mental Demands: Wears personnel protective equipment as required Physical and mental ability to operate oversize loads and all associated equipment Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Work Environment & Safety: Employee will work in a variety of environments including garage, work yard, in town driving, highway/freeway driving, construction site locations, etc. Must be able to perform task in all conditions including wet, humid, and dry. Will be working in outside weather conditions and will have exposure to common maintenance hazards. Must be able to perform responsibilities in compliance with the company's safety practices. Must maintain a professional, responsible, and accountable attitude and must be able to perform task in a timely manner. Required ability to maintain a safe and healthy working environment taking responsibility for any necessary precautions to protect themselves, the company, other employees, and the venders to avoid any injury and health hazard. Must immediately report all incidents to supervisors. Safety Sensitive Position: This position is subject to the DOT Agency Regulations under FMCSA. It is classified as a safety sensitive position and, in addition to adhering to the Satellite Policy Substance Abuse and Drug-Free Workplace, this position is subject to the FMCSA DOT Agency Regulations and shall follow the DOT Controlled Substances and Alcohol Policy for Drivers. PM25

Role: Salesforce Technical Delivery Manager Provide technical expertise and leadership to a team dedicated to Salesforce technologies design and build activities. Ensure activities are completed, validated, aligned with architectural objectives and requirements, and successfully deployed into the production environment. Provide mentorship to the team ensuring optimization of designs/solutions. Champion standard processes and procedures. Provide troubleshooting for development and test environment issues. Required Qualifications: • Bachelor's degree in Computer Science, Engineering, related field, or equivalent relevant work experience. • 8+ years of experience of progressive scope/impact/responsibility (including both hands-on and leadership roles) working with technologies. • Proven track record for delivering varying initiatives and driving execution. • Demonstrated experience and success in influencing, leading, and coaching without direct leadership responsibility. • Demonstrated reasoning and troubleshooting skills. • Demonstrated in-depth and hands-on experience working with salesforce platform on configuration, customization (Lightning Components, Apex, Visualforce, SOQL, etc.), integration, security, administration and other core features. • Defined and delivered scalable technical solution architecture and integrated solution involving Salesforce clouds, preferably Financial Cloud. • Demonstrated an understanding of integrations with third party systems through a variety of integration patterns (ESB, Pub/Sub, Point to Point, Batch, Singleton, etc.) and Salesforce capabilities (Soap, Rest, Platform Events, Streaming APIs, etc.). Preferred Qualifications: • Proven ability to communicate and articulate technical information across various organizational levels. • Experience working in geo-dispersed team environments. Ability to negotiate or persuade others in moderately complex situations

Electrical Project Manager REPORTS TO: Operations Director WHO WE ARE: If you're tired of being a small player in a big company, Integrated Building Solutions (“IBS”) might be the place for you to be seen, heard, and contribute. We are a small company with a nation-wide reach. We describe ourselves as being weird in an exceptionally good way because we care about doing the right thing for our customers and finding a way to get things done where other companies don't or won't. “We love spending our customer's money, but we hate wasting it.” And the “weird” part is, we mean it. IBS is a nationally recognized specialized general contractor in electrical, fire, and safety. We provide a life cycle of services including consulting, engineering, construction, commissioning, maintenance, and training throughout North America. IBS runs on EOS purely. That means as a member of this team, you will have a leader who: Gives clear directions Makes sure you have the necessary tools Acts with the greater good in mind Delegates appropriately Takes time to truly understand your role and how you can help the company Makes their expectations clear Has effective meetings At a minimum, meets one-on-one with you quarterly Rewards and recognizes your performance ABOUT THIS ROLE: As an EOS “Traction” company (Right Person/Right Seat) the successful candidate is a fully competent electrical project manager with functional knowledge and in-depth experience in commercial construction, including electrical, fire, and HVAC systems. Specific responsibilities include: Project estimating Determining resources (labor, equipment, and materials) from project start to finish Planning to ensure deadlines are met and costs are within budget Oversee/manage field personnel/subcontractors daily Ensure accuracy and consistency; maintain, meet, or exceed construction standards/codes Develop/Maintain customer relationships to secure future work Always searching for new opportunities This role will be accountable for quarterly and annual goals which can pay significant incentive pay: Recognized Gross Profit % Training & Development In-person Customer Interactions ABOUT YOU (RIGHT PERSON): You are the right person in the right seat if you have demonstrated skills that reflect our core values: We CARE, We LISTEN, We ANTICIPATE, We INNOVATE, and We DO. You bring a minimum of three (3) years of experience working for an electrical design build contractor. You have thorough knowledge of the NEC and NFPA 70E, you can produce on-time and profitable projects, and demonstrate the following: Creativity - you are a creative problem solver. Influencer - high level of PM expertise to influence direct reports & clients to sell ideas and shape decision criteria. Humor - our office environment is relaxed yet professional; a good sense of humor is required to fit within the culture. Travel - overnight travel approximately 20% of the time (10 weeks/yr); travel as the job requires. Financial Literacy - a clear understanding of key financial concepts. Group Presentation Skills - deliver training to both prospects and clients. Account Management - this role is forward-facing with clients and ensures client delight. You possess meticulous work habits including close attention to detail, time management, people skills, problem-solving skills, exceptional organizational skills, ability to effectively communicate and present technical information verbally and in writing via Microsoft Office applications (mainly Excel, Word, and PowerPoint). ABOUT YOU (WRONG PERSON): You're looking for a temporary job. You don't want to continue learning. You are easily offended. You don't own reliable transportation. You're nervous about a background check. You can't or won't pass a drug test. You have a driving record with more than a couple minor blemishes. You believe society owes you something. MINIMUM QUALIFICATIONS: Any combination of education and experience that would likely provide the required knowledge, skills, and abilities is qualifying. Education: High School diploma with trade and/or college project management schooling or related field. Experience: Minimum three (3) years working for an electrical design build contractor. BENEFITS: Heath / Dental / Life / LTD 401(k) Safe Harbor PTO Fuel Allowance Mobile Phone Allowance Professional development assistance Airline / Hotel / Rental Car Points Relocation Assistance IBS is an equal opportunity employer and affords equal opportunity to all employees for all positions without regard to race, color, religion, gender, national origin, age, disability, veteran status or any other status protected under local, state, or federal laws.

Do you enjoy working in a fast-paced environment and are you results driven? Are you analytical? Do you love retail? If so, we are interested in chatting with you! Your daily, weekly and monthly duties, responsibilities and activities may vary greatly offering you an exciting and dynamic work environment. We are looking for candidates who excel in multitasking, data analysis, problem solving and have strong communication skills. What You'll Do: · Partner with VP of Sales to help grow the business by improving inventory and supply chain · Collaborate with brands/manufacturers and Target's teams to ensure execution of product from item inception through supply chain · Identify and lead initiatives to continuously improve demand planning, instocks, OOS · Help business partners track PO's and guarantee on time shipping · Maintain our internal system for items, orders, and invoices · Research chargeback and accounts payable issues Who You Are: · Analytical and data-driven: You are comfortable navigating across a swatch of metrics and extracting the “aha” insights · Problem Solver: You leverage your knowledge, experiences, and resources to find a solution no matter what comes your way · Team player: Willing to pitch in and help wherever it is needed. You are as comfortable in a high-level executive meeting as you are unpacking boxes of product samples · Detail-oriented: High level of attention to detail, data integrity and quality · Growth mindset: You thrive in performance-focused teams and feel energized by scaling business impact Qualifications · Bachelor's Degree or equivalent · 1+ years of Analyst, Buyer, Demand Planner, Merchandiser or equivalent role at retailer · Working knowledge of logistics · Microsoft Excel advanced skills · Experience working at or with Target headquarters is preferred Job Type: Full-time Benefits: 401(k) Employee discount Medical & dental insurance Health savings account Paid time off Parental leave Schedule: 8 hour shift Monday to Friday

**Posting Title:** Safety Internship - Summer 2026 (Multiple Locations) **Salary Range:** $23.77/hour to $35.23/hour Final determination of a successful candidate's starting pay will vary based on a number of factors, including market location and may vary depending on job-related knowledge, skills, education and experience. The pay scale listed for this position is generally for candidates that meet the specified qualifications and requirements listed on this specific job description. We provide a competitive compensation package that recognizes your experience, credentials, and education alongside a robust benefits program to meet your needs. Our compensation reflects the cost of labor across several US geographic markets. **WHO WE ARE** For nearly 70 years, Cupertino Electric, Inc. (CEI) has been powered by people who've built a reputation for delivering high-profile, complex projects. Real, tangible things that alter the landscape and improve lives. But even more than that, we've built a reputation for integrity. We're problem solvers and innovation seekers. We're team players and safety fanatics. And we always-always-do the right thing. Even when no one is looking. Because what we do here is important, but how we do it is everything. **ABOUT THE ROLE** The Internship Program at Cupertino Electric, Inc. is a 10-to-12-week program designed to expose undergraduate and post-graduate students to various aspects of CEI's core markets: Commercial, Data Center, and Energy & Renewables. The program offers students unique opportunities to contribute to real-world projects and make meaningful industry connections. Although we are headquartered in California, we have major projects and offices in many other states including Ohio, Iowa, Wisconsin, New Mexico, and Utah. _Below is a detailed example of responsibilities an intern may participate in or contribute to during their time with CEI:_ + Support Crew Foreman/General Foremen in the development of Job Hazard Analyses. + Evaluate the effectiveness of safety programs through daily field walks. + Regulatory compliance and audit oversight. + Provide regular feedback to project leadership in a constructive manner on needed areas for safety improvement and recognition. + Provide coaching and mentoring for employees exhibiting unsafe behaviors and provide recognition for employees exhibiting safe behaviors. + Support Project Leadership in the execution of weekly toolbox safety meetings. + Support Project Leadership in the completion of incident investigations. **_ABOUT YOU_** _We seek the most curious, confident, and resourceful candidates in the US that are interested in the electrical construction industry. Our most successful new hires flourish because they do not accept the status quo. They work hard, learn and grow from their inevitable mistakes, and enjoy working with a team._ **_WHAT YOU WILL GAIN_** _At Cupertino Electric, Inc. (CEI), we celebrate the challenge. Complex electrical construction projects requiring creative solutions, and this is what we thrive on._ _As part of the Internship Program at Cupertino Electric, you'll be on a career development path to safety._ _You will gain the unique opportunity to start your career in safety in the construction industry. You will be exposed to a wide variety of experiences and tasked with solving a comprehensive set of challenges._ _You'll have the opportunity to soak up knowledge from everyone you work with - from the journeyman and general foreman to the safety and project team assigning daily tasks._ **MINIMUM QUALIFICATIONS** _Any combination of education and experience that, in the sole judgment and discretion of Company, would likely provide the required knowledge, skills and abilities as well as possession of any required licenses or certifications may qualify._ **Education:** High School Diploma or GED required. Current student studying Safety, EHS, or a similar major. **Licensure/Certifications:** None required. **Experience:** 0 years of experience required. *Applicants must be authorized to _work_ in the United States. This position is not _eligible_ for sponsorship. \#LI-MG1 **PLEASE NOTE:** CEI will never ask for any money or financial information from applicants during the hiring process. To learn more about "job scams" how to avoid them, click here. (******************************************** CEI is a place where every single person can-and does-have an impact on the work we do and the communities we serve. Here, you can build your own story and grow to your full potential. You can collaborate and celebrate with amazing people. And you'll go home every day knowing you helped contribute to important work that shapes people's lives. Our commercial, data center and energy projects may be complex, but our approach is simple. We build great things and we do it with great people. The job duties listed are typical examples of work performed by positions in this job classification and are not designed to contain or be interpreted as a comprehensive inventory of all duties, tasks, and responsibilities. Specific duties and responsibilities may vary depending on department, program or project needs without changing the general nature and scope of the job or level of responsibility. Employees may also perform other duties as assigned. Cupertino Electric, Inc. (CEI) is proud to be an Equal Employment Opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Cupertino Electric Inc. aims to make cei.com accessible to any and all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact us at *************** or 1-(877)-747-4CEI. Cupertino Electric, Inc. (CEI) is proud to be an Equal Employment Opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.

include (but are not limited to) the following: * Review processing schedules or production orders to make decisions concerning inventory requirements, staffing requirements, work procedures, or duty assignments, considering budgetary limitations and time constraints. * Direct or coordinate production, processing, distribution, or marketing activities of industrial organizations. * Develop or implement production tracking or quality control systems, analyzing production, quality control, maintenance, or other operational reports, to detect production problems. * Assist in the hiring, training, evaluating, or discharging of staff or resolving personnel grievances. * Prepare and maintain production reports or personnel records. * Set and monitor product standards, examining samples of raw products or directing testing during processing, to ensure finished products are of prescribed quality. * Initiate or coordinate inventory or cost control programs. * Coordinate or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines. Responsibilities/Expectations: * Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. * Maintain a good record of attendance and punctuality. * Learn all manual tasks performed within the department. * Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. * Treat people with dignity and respect. * Conduct all business with integrity. * Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. * Follow all safety procedures and company policies. QUALIFICATIONS: KNOWLEDGE * English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. * Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. * Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources. * Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction. * Engineering and Technology - Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services. * Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance. * Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming. * Education and Training - Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects. Skills * Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. * Speaking - Talking to others to convey information effectively. * Coordination - Adjusting actions in relation to others' actions. * Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. * Management of Personnel Resources - Motivating, developing, and directing people as they work, identifying the best people for the job. * Reading Comprehension - Understanding written sentences and paragraphs in work related documents. * Time Management - Managing one's own time and the time of others. * Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one. * Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action. * Social Perceptiveness - Being aware of others' reactions and understanding why they react as they do. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers 9 paid holidays and two floating holidays per year. You are also eligible to earn two weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Job Type: Full-Time Salary: $75,000 - $110,000 Shift: Monday -Thursday: 3:30PM - 2:30AM, Friday: 2-3 hours on non-mandatory Fridays to wrap up the week (if necessary) We are currently working mandatory every other Friday until the weekend shift gets up and running There is a shift premium for Fridays

2300 Vierling Drive West, Shakopee, Minnesota 55379 United States of America Why Oatey? Since 1916, Oatey has provided reliable, high-quality products for the residential and commercial plumbing industries, with a commitment to delivering quality, building trust and improving lives. Today, Oatey operates a comprehensive manufacturing and distribution network comprised of industry leading family of companies: Oatey, Cherne, Keeney, Quick Drain, Hercules, Dearborn, GF Thompson, William H. Harvey, Masters, Contact, Belanger, Lansas, and Durgo. At Oatey, we're doing big things - and by joining us, you'll have the chance to do big things too. You can build a strong career in an innovative, inclusive, high-performance environment, with the confidence that your company cares - about you, our customers and our world. Ready to make an impact in a place where you matter? - Position Summary: Responsible for satisfying customer inquiries via fax, phone and internet regarding products and product applications. Position Responsibilities: Work with customers to troubleshoot and resolve product application issues. Make product recommendations based on customer requirements. Respond to customer inquiries for product or order information from email, phone, fax or EDI. Coordinate with local sales agent to resolve customer application issues. Ensure special instructions are clearly communicated in text with appropriate dates, initials, and buyer contacts. Recommend and up sell products compatible with customer buying patterns and quotations. Support Lean initiatives. Edit orders for correct sales and shipping information, and ensure proper price is applied. Make additions and deletions to existing orders according to existing policy and procedure. Develop and deliver ongoing product application training for customer service staff, providing technical tips to assist customers. Provide technical support during on site visits and virtual training. Enter customer/product complaints/claims into our Quality Form (QF) system. Answer customer inquiries through Bazaarvoice from our various distributors. Knowledge and Experience: In-depth product knowledge (product attributes and applications) in the Plumbing industry. In-depth written and oral communication skills. Good listening and questioning skills. In-depth customer service skills. Ability to problem solve and identify root cause. Broad understanding of the manufacturing process. Previous experience in a call center environment. Previous experience in a technical support role. PC Computer Proficiency: Word, Excel, etc. In-depth emotional intelligence: behavioral maturity, demonstrated trust and integrity, high ethical standards, interpersonal competence and the ability to prevent, reduce and resolve conflict. Bilingual (Spanish) a plus. Education and Certification: Undergraduate degree preferred Compensation Range for the position Minimum $56,846 - Midpoint $72,478 - Maximum $88,111 Offer amount determined by experience and review of internal talent.

Quanex is looking for an Inspection and Repair Associate to join our team located in St. Cloud Minnesota. In this role, you'll inspect, repair, and document doors to meet customer or Quanex standards while following all safety and operating procedures. You'll maintain a clean, organized work area and support teamwork to ensure a safe, efficient, and high-quality environment. We Offer You! * Medical, dental & vision start the 1st of the month after hire * PTO, paid holidays & paid training - start right away * 401(k) with company match & vesting * Employee Stock Purchase Plan * Life insurance provided * Healthy-living discount on medical insurance - save up to ~50% * Tuition assistance * Wellness resources & onsite physical therapist * Safety-toe shoes at no cost * Free fountain drinks during shifts * Referral bonuses * 90-day performance review for pay adjustment * Supportive, people-first culture * * What's attractive about the Production Associate? * Hours & Pay w/ overtime potential: * 4:30 pm to 3:00 AM (Monday to Thursday) - $17+ per hour & 12% shift differential * Position Location: St. Cloud, Minnesota What Success Looks Like: * Receives job assignments, instructions and related documentation from supervisor/team lead. * Maintains the work area in a neat and orderly condition in compliance with 5S standards. * Follows all safety procedures, rules, and guidelines; and notifies the supervisor/team lead of any existing or potential safety issues. * Follows all standard operating procedures and notifies the supervisor/team lead of potential procedural improvements or concerns. * Inspects all doors to the individual customer or Quanex specifications as instructed by the supervisor/team lead. * Repair all doors to the customer or Quanex specification as instructed by the supervisor/team lead. * Reject and document all doors that are unrepairable to customer or Woodcraft specifications or as instructed by the supervisor/team lead. * Promotes teamwork by cooperating and supporting co-workers. What You Bring: * Ability to lift 25 pounds. * Strong mechanical aptitude and manual dexterity skills. * Proven ability to perform detailed work requiring high levels of concentration. * Displays a positive attitude and a strong desire to learn and grow. * Ability to perform repetitive work requiring high levels of concentration About Quanex, A Part of Something Bigger Quanex (NYSE: NX) is a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. We are A Part of Something Bigger by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, dedication to giving back to communities where we operate, producing shareholder value and helping our employees learn, grow, and thrive. Learn more at Quanex.com.

McGough Facility Management (MFM) is a respected partner that brings six generations of experience to our clients. We take great pride in our people and their extraordinary expertise in facility and property management. McGough employee tenure reflects the commitment and pride we share in our work. Ask anyone who knows us - the caliber of our people sets us apart. BUILDING ENGINEER The Building Engineer is responsible for ensuring that all building systems, equipment, and facilities are functioning safely, efficiently, and in optimal condition. This role includes HVAC operations, preventive maintenance, general repairs, inspections, and providing strong customer service to tenants and stakeholders. Qualifications: Required: High school diploma 5-7 years of commercial building maintenance or related experience Working knowledge of building maintenance, construction, and general repairs (plumbing, carpentry, mechanical, electrical) HVAC preventive maintenance, repair, and operations experience Ability to work independently and efficiently on routine assignments Willingness to participate in 24/7 on-call rotation for emergencies Boilers License: Second Class C (minimum requirement) or ability to obtain within six (6) months of hire Valid Driver's License and good driving record (per McGough Fleet Policy) Preferred: Post-secondary education in building maintenance and/or HVAC systems 5-7 years of commercial building maintenance or building engineering experience Hydronic Boiler experience Universal Refrigerant License Knowledge of OSHA and other code and safety standards Proficiency in basic computer applications and building management systems Strong customer service, communication, and problem-solving skills Office, Travel, & Schedule: Primary work at Butler Square Building and/or other managed locations Schedule: Monday-Friday, 7:00 AM-3:30 PM, with flexibility to work outside of normal hours as needed Assigned parking provided in the loading dock (for Butler Square) Frequent outdoor weather exposure during seasonal work Responsibilities and Tasks: Operations & Preventive Maintenance Operate, inspect, and maintain HVAC, mechanical, electrical, plumbing, and other building systems to ensure optimal performance and longevity Conduct regular building inspections to identify and address maintenance and repair needs (interior and exterior) Perform preventive maintenance and implement measures to extend equipment life and minimize downtime Maintain accurate records of work orders, inspections, repairs, and preventive maintenance activities Repairs & General Maintenance Perform routine building repairs including doors, hardware, locks, drawers, ceiling grids/tiles, and windows Conduct plumbing repairs (e.g., flush valves, faucets, toilets, sinks, drinking fountains) within level of expertise Complete minor electrical repairs and coordinate with licensed electricians when needed Perform painting, carpentry, and basic structural repairs (walls, floors, sheetrock, etc.) Assist with moving furniture, hanging pictures/whiteboards, and similar tasks as needed Safety & Compliance Comply with all safety procedures, maintain clean and safe work areas, and ensure adherence to OSHA and safety standards Recognize and resolve potential safety hazards Support fire/life safety, building automation, and critical power systems as trained Customer Service & Collaboration Respond promptly to maintenance requests, including hot/cold calls and emergency needs Provide professional and courteous service to tenants, property managers, and stakeholders Collaborate with internal teams, contractors, and service personnel to complete work effectively Escort contractors and vendors as required in tenant and building spaces Seasonal & Other Duties as assigned Maintain building supplies, tools, light bulbs, spare parts, and related items Perform snow removal, salting, and sanding at entrances and walkways during winter to ensure safe access Participate in the on-call rotation and respond to emergencies outside normal hours as needed Other duties as assigned to support facility operations Physical Requirements: The physical requirements listed here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employee needs to be able to lift up to 50 pounds as frequently as needed to move objects; dexterity to write and manipulate computer keyboard and mouse; ability to hear and speak clearly; and ability to distinguish between colors on graphs and charts. Typical assignments frequently require that work be completed outdoors in a variety of weather conditions. Some jobs require an employee to work on high structures such as ladders and scaffolds. While performing the duties of this job, the employee is regularly required to reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; and use hands to finger, handle, feel or operate objects, tools, or controls. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl. Occasionally, employee will be required to visit construction jobsites which may expose the employee to dirt, dust, uneven surfaces, outdoor weather conditions and extreme temperatures. *** In alignment with our commitment to pay transparency, the hourly base salary range for this position is $34.00 to $40.00, excluding fringe benefits or potential bonuses. If you join McGough, your final base salary will be determined by several factors, including geography, location, skills, education, and experience. Furthermore, we place significant value on pay equity among our current team members as part of any final job offer. Please note that the range provided above reflects the hiring range for this role. Hiring near the top end of this range would be atypical, as we aim to allow room for future salary growth. Additionally, McGough offers a comprehensive compensation and benefits package. This includes insurance coverage for medical, dental, vision, life, and disability. We also provide generous retirement plans, voluntary benefit plans, parental leave, substantial paid time off, and holiday pay.

GENZ RYAN IS HIRING A COMFORT ADVISOR! Why Genz Ryan? We live by five words: Pride. Drive. Team Player. Respect. Get Sh!t Done. At Genz Ryan, we're on the hunt for a people-loving, Comfort Advisor! If you thrive on face-to-face conversations, love solving problems in real-time, and want to work somewhere your personality actually matters - this gig's for you. GENZ RYAN COMFORT ADVISOR TYPICAL DUTIES (Illustrative, Not Inclusive): * Visit homeowners in around the twin cities through scheduled appointments by our dispatch team (typically 2-4 visits on average per day) * Perform both homeowner visits and in-office/phone prospecting and customer follow-ups on a daily basis. * Drive a company provided vehicle (and gas card) to deliver exceptional customer service for our valued customers. * Generating relationships with customers to offer the right HVAC, Plumbing, and Electrical solutions to each homeowner * Master the art of objections and negotiation * Develop internal relationships with our technicians, warehouse staff, customer service and dispatch teams * Miscellaneous duties as assigned * At least 6+ months of HVAC work experience (residential preferred but any experience will transfer). * Must be at least 18 years of age and possess a valid driver's license. * A money hungry attitude and passion for building strong relationships * Ability to work typical day shift hours Monday-Friday, with flexibility to work longer than 8 hours per day, and some weekend requirements that we work with you to schedule accordingly. * Highly organized with exceptional follow-through * Strong written and verbal communication skills * Willing and able to accept and embrace change * Be part of a culture that gets sh!t done and has fun doing it! * Exceptional training and onboarding to set you up for success. * Career growth? Absolutely - we love promoting from within! * Lucrative compensation plan! Get out what you put in! * We use cutting-edge tech to make our jobs easier and more efficient. * Regular "clarity breaks" - because mental well-being matters. * We track everything - including staff happiness on a weekly basis! * Epic social events year-round. * 100% company-paid health and dental insurance premiums (for both single and family). * Paid short-term disability. * Flexible Spending Accounts (Medical and Dependent Care). * 401(k) with employer match. * Paid vacation and holidays. * Weekly pay - because waiting is overrated! Come join a great team with a company with over 75 years in business! APPLY NOW! Please email ******************** if you have any questions!

Job Description Are you a seasoned curtainwall designer looking to take the next step in your career? Enclos is seeking a skilled and motivated Fabrication Lead to join our engineering team and help drive excellence across some of the most complex facade projects in the industry. This is a key lead role for someone who thrives at the intersection of design, fabrication, and technical problem-solving-guiding project drawing packages, mentoring designers, and ensuring quality at every stage. If you're ready to use your expertise to influence project outcomes and help shape the next generation of curtainwall talent, we'd love to connect. Position Overview: The Fabrication Lead position at Enclos is a highly technical and hands-on role responsible for guiding a team of curtainwall designers and technicians through the full lifecycle of project design. This role oversees quality assurance and drafting standards, coordinates complex project drawing packages, and serves as the critical link between design intent and fabrication, assembly, and installation. The Fabrication Lead mentors junior team members, provides technical guidance, identifies design changes, and supports collaboration with engineering, field, and fabrication teams. This position requires advanced drafting experience, proficiency in CAD and modeling tools, and the ability to lead, problem-solve, and communicate effectively across project stakeholders. Essential Duties and Responsibilities: Trains and mentors Curtain Wall Technicians, Designers I, and Designers II. Oversees and coordinates Quality Assurance/Quality Control policies for engineering team subordinates. Coordinates a portion of a projects drawings (plans, elevations, details, embeds, layouts, tag, unit, parts, take-offs, 3D, dies, etc.) Identifies design and scope changes and communicates changes to System Designer. Identifies requests for information (RFI's) re: design and scope changes. Assists in reviewing and interpreting rough sketches, drawings, specifications, and other engineering requirements received from Professional Engineer, and helps to ensure that revisions are incorporated into the production, fabrication, and field drawings. Understanding the design impact through the lifecycle of a project. Can anticipate how the design will be fabricated, acquired, assembled, shipped, and installed. Provides feedback regarding project to System Designer or TPM. Participates in mock-up activities (fabrication, assembly, and testing) as required by the Operations Project Manager. Participates in performance reviews of engineering team subordinates. Reads and interprets project architectural drawings and specifications to determine best systems, designs and components to be used for production drawings. Interprets project specifications, contract, cost estimate, and contract drawings. Accurately evaluates time required to complete an assignment. Ensures that assigned team complies with company policies regarding CAD and drafting standards, as well as safety and security procedures. Provides assistance to field, shop, or vendors. Qualifications: Associate's degree in Architectural Drafting, Engineering, or related field. 5-10 years of curtainwall drafting experience. Ability to coordinate a small group of subordinates, and delegate work as needed. Ability to communicate effectively both orally and in writing. Ability to use CAD, Word Processing, spreadsheet, Email and Internet software. Proficiency in at least two of the following programs: AutoCAD, Revit, Inventor. Ability to perform and/or coordinate work of subordinate team members (Curtainwall Technician, Designer I & Designer II) within a project. Ability to solve problems involving several well-defined variables in standardized situations. Knowledge of advanced drafting techniques and modifications of theories, precepts, and practices of the curtainwall field. COMPENSATION At the Enclos Family of Companies, compensation is determined based on several factors including but not limited to work experience, education, geographic location, certifications, etc. Your recruiter can share more about the specific compensation package for your preferred role during the hiring process. The successful candidate for the Fabrication Lead role in Minneapolis, MN can expect to earn $65,000 to $85,000 per year. This position is also eligible to participate in the company's incentive bonus plan. Benefits include, and are not limited to: 401(k) plan with company match Medical, dental, prescription, vision coverage Tax-advantaged accounts for healthcare expenses Flexible time off and paid holidays Paid parental leave Career growth and nationwide career opportunities Equal Opportunity Employer Enclos Corp is committed to providing equal employment opportunity to all applicants and employees regardless of their race, creed, color, religion, sex, age, national origin, disability, military service, protected veteran status, genetic information, sexual orientation, gender identity, or any other characteristic protected by federal, state or local law. We are strongly committed to this policy and believe in the concept and spirit of the law. Enclos Corp is further committed to ensuring that employment decisions are based on valid job requirements. In addition, all employment actions, such as recruiting, hiring, training, promotion, compensation, benefits, transfer, layoff, and termination are administered fairly to all persons on an equal opportunity basis, without discrimination based on the protected categories named above. Enclos Corp will also provide qualified applicants and employees with disabilities reasonable accommodations, if possible, as required by law. Job Posted by ApplicantPro

Department Manufacturing Locations Otsego - 105 Hourly/Salaried Hourly Oracle Department Otsego-Reliability|USG Paper, LLC|USG Business Group Oracle Job Title MFG. Summer Hire. . ||USG

2300 Vierling Drive West, Shakopee, Minnesota 55379 United States of America Why Oatey? Since 1916, Oatey has provided reliable, high-quality products for the residential and commercial plumbing industries, with a commitment to delivering quality, building trust and improving lives. Today, Oatey operates a comprehensive manufacturing and distribution network comprised of industry leading family of companies: Oatey, Cherne, Keeney, Quick Drain, Hercules, Dearborn, GF Thompson, William H. Harvey, Masters, Contact, Belanger, Lansas, and Durgo. At Oatey, we're doing big things - and by joining us, you'll have the chance to do big things too. You can build a strong career in an innovative, inclusive, high-performance environment, with the confidence that your company cares - about you, our customers and our world. Ready to make an impact in a place where you matter? - Position Summary: The Senior Director, Cherne Global Operations will provide strategic leadership and oversight for Cherne (part of the Oatey family of brands) manufacturing and distribution sites in Shakopee, Minnesota and Eijsden, Netherlands. This position is responsible for ensuring safe, efficient, and cost-effective operations that meet customer requirements, deliver exceptional quality products, and maintain a strong focus on associate engagement. The role will integrate operational and engineering expertise to drive continuous improvement, innovation, and scalability across global facilities, aligning with Oatey's long-term growth strategies. Primary Responsibilities: Safety & Compliance Ensure the well-being and safety of all associates across all sites. Maintain all safety requirements and compliance programs, including behavior safety observations, incident reporting, and corrective actions. Management and Leadership Direct two Cherne manufacturing and distribution operations. Provide leadership for the Engineering and Operations functions, ensuring alignment between product design, manufacturing processes, operational performance, and continuous improvement initiatives. Drive safe, efficient, and timely execution of all manufacturing and engineering processes. Ensure processes, standards, and procedures are followed to deliver world-class quality products. Provide technical and engineering oversight to optimize manufacturing performance and scalability. Partner with Engineering, R&D, and New Product Development to integrate engineering solutions into new and improved product development. Lead capital investment planning and engineering-driven initiatives to support innovation and growth. Ensure compliance with applicable government regulations and company policies across all operations. Strategic Planning & Financial Management Develop and manage operating budgets for multi-site operations. Lead 5-year strategic planning, aligning operations and engineering strategies with corporate goals and global opportunities. Drive productivity improvements, cost savings, and margin enhancement initiatives. Continuous Improvement Champion Lean, Six Sigma, and other continuous improvement methodologies across international operations. Develop and implement standardized best practices to strengthen safety, quality, productivity, and customer service. People & Culture Provide empathetic leadership, developing and mentoring diverse cross-functional teams across multiple geographies. Drive engagement, retention, and succession planning initiatives aligned to company strategy. Promote collaboration and knowledge-sharing across Oatey's global network of manufacturing and distribution sites. Knowledge and Experience: 10+ years of progressively responsible experience managing multi-site and international operations with strong engineering exposure. 5+ years of management/supervisory experience. Proven track record of leadership in environments with complex manufacturing processes (robotic, rubber, chemicals, metals). Deep knowledge of engineering best practices, manufacturing systems, Lean techniques, Six Sigma, and continuous improvement. Strong knowledge of quality systems and global regulatory compliance requirements. Demonstrated business and financial acumen with the ability to manage complex budgets and deliver strategic results. Effective interpersonal skills with the ability to lead diverse, cross-cultural teams and resolve conflicts with integrity. Proficiency in leading site ERP systems implementations (SAP preferred) and advanced PC skills, including Microsoft Office Suite. Certified Lean and Six Sigma Black Belt (preferred). Ability to travel domestically and internationally up to 30%. Education and Certification: Four-year degree in Engineering (highly preferred) or equivalent years of relevant operational leadership experience required. Advanced degree (MBA or MS in Engineering/Operations) strongly preferred. Compensation Range for the Position $152,716.00 - 202,348.50 - 251,981.00 USD Offer amount determined by experience and review of internal talent. Compensation Range for the Position: $152,716.00 - $202,348.50 - $251,981.00 USD Target Cash Profit Sharing for the Position: 18.00% Offer amount determined by experience and review of internal talent.

The Installation Assistant will support the Installation Specialist in the installation and anchoring of modular buildings and mobile trailers at customer locations. When not assisting the Installation Specialist, the Installation Assistant will perform duties as a Yard Technician, ensuring the units are maintained according to company standards. Essential Duties and Responsibilities:Installation Tasks: Assist in the installation and anchoring of modular buildings and mobile trailers at customer locations. Assist in the retrieval of modular buildings and mobile trailers from customer locations to the yard. Assist in installation of skirting, steps, and VAPs at customer locations. Assist in safety protocols for CDL drivers. Assist in ensuring trucks are properly loaded. Operate hand and power tools safely. Serve as a spotter for CDL driver on job sites. Interface with customers at job sites. Yard Technician Tasks: Clean all units, including washing and waxing flooring. Replace and install floor tile. Replace and install windows and doors. Replace and install exterior siding and other building components. Paint all portions of units to specifications. Remove and replace walls. Remove and replace lighting, plumbing and electrical. Perform light carpentry work/repair on customer job site. Operate company toter as needed to maneuver trailers in yard. Required Skills and Qualifications: Light carpentry and electrical experience. Basic mechanical skills to work on trucks. Good organizational skills. Demonstrated knowledge and skills. Ability to operate company service vehicles. Ability to pass DOT medical exam. Physical/Mental Demands: Ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion, and grip strength. Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Wears personnel protective equipment as required. Work Environment and Safety: Employee will work in a variety of environments including garage, work yard, in-town driving, highway/freeway driving, construction site locations, etc. Must be able to perform tasks in all conditions including wet, humid, and dry. Will be working in outside weather conditions and will have exposure to common maintenance hazards. Must maintain a professional, responsible, and accountable attitude and perform tasks in a timely manner. Required ability to maintain a safe and healthy working environment taking responsibility for any necessary precautions to protect themselves, the company, other employees, and the vendors to avoid any injury and health hazard. Must immediately report all incidents to supervisors. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

Junior Project Manager - Glass & Glazing Industry J&A Glass & Mirror Inc. is a trusted Minnesota-based glazing contractor serving both residential and commercial clients across the region. For over two decades, our team has built a reputation on reliability, craftsmanship, and teamwork. We take pride in being the company clients' call first because we provide steady, high-quality work our crews can stand behind. Job Summary We're looking for a motivated Junior Project Manager who's ready to grow into project management. This role bridges hands-on construction experience with office coordination, helping to ensure projects run smoothly from start to finish. The right candidate will learn to manage schedules, coordinate materials, and communicate between clients, field crews, and vendors. Key Responsibilities Support Project Managers in planning and executing glazing projects from bid to completion Communicate daily with installers, general contractors, and clients to track progress and resolve issues Assist with takeoffs, material orders, submittals, and change orders Help maintain job costing and project documentation Visit job sites to verify work progress and ensure quality standards Learn company systems for scheduling, estimating support, and project closeout Maintain organized digital and physical project files Qualifications Background in construction or the skilled trades (glazing, carpentry, or related) preferred Basic understanding of construction drawings and site operations Strong communication and organization skills Comfortable balancing field and office work Proficiency with Microsoft Office (Excel, Outlook, Word); experience with construction software a plus Eagerness to learn, take initiative, and grow into a full Project Manager role Why Join J&A Glass Career Growth: Clear path from Junior PM to full Project Manager with mentoring from experienced leaders Team Environment: Work closely with field crews and management that value respect, safety, and collaboration Reputation & Stability: Established name in Minnesota's glazing industry with consistent year-round work Craftsmanship Culture: Be part of a company that takes pride in doing things right the first time Compensation & Benefits Summary Competitive pay based on experience Health and dental insurance Paid time off and holidays 401(k) with company match On-the-job training and advancement opportunities Application Instructions Apply via Indeed, LinkedIn, ZipRecruiter , or directly through our website at ************************** .

60%: CDL Driver: Operates company toters to transport products to and from specified locations. Works directly with consumers. Other duties may be assigned based on business needs of location. DOT certification required or attainable. 40%: Installation: Installation & anchoring of units. Pick up units to be returned to the branch. Essential Duties and Responsibilities: CDL Driver: Responsible for ensuring truck is loaded properly. Responsible for weight of shipment. Monitor and evaluate daily load schedule. Coordinate with other drivers Ensure truck is current and proper on all inspection criteria. Comply with all DOT requirement Record completely and accurately all timesheets and loads hauled/transferred completely and accurately. Report all loads to supervisor daily. Maintain truck in good working order. Daily fill out Driver's Vehicle Inspection Report per DOT regulations. Daily fill out Vehicle Inspection Report and Driver's Daily Log and forward to Supervisor at end of day per DOT regulations. Assist work in yard as required by supervisor. Perform other duties as assigned. Installation: Install and anchor modular buildings and mobile trailers at customer location Retrieve modular buildings and mobile trailers from customer locations and return to yard. Performs other duties as required Required Skills and Qualifications: Class “A” Commercial Driver's License required. Clean MVR required. Ability to pass required background checks Education & Experience Requirements: High school diploma or equivalent. Twelve (12) months commercial driving experience required within the last three (3) years. Experience working in multiple climates including extensive snow, ice, heat, and rain. Basic mechanical skills to work on trucks Average ability to read and write to read location directions and prepare tickets and reports accurately. Good organizational skills Demonstrated knowledge and skills Physical/Mental Demands: Wears personnel protective equipment as required Physical and mental ability to operate oversize loads and all associated equipment Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Work Environment & Safety: Employee will work in a variety of environments including garage, work yard, in town driving, highway/freeway driving, construction site locations, etc. Must be able to perform task in all conditions including wet, humid, and dry. Will be working in outside weather conditions and will have exposure to common maintenance hazards. Must be able to perform responsibilities in compliance with the company's safety practices. Must maintain a professional, responsible, and accountable attitude and must be able to perform task in a timely manner. Required ability to maintain a safe and healthy working environment taking responsibility for any necessary precautions to protect themselves, the company, other employees, and the venders to avoid any injury and health hazard. Must immediately report all incidents to supervisors. Safety Sensitive Position: This position is subject to the DOT Agency Regulations under FMCSA. It is classified as a safety sensitive position and, in addition to adhering to the Satellite Policy Substance Abuse and Drug-Free Workplace, this position is subject to the FMCSA DOT Agency Regulations and shall follow the DOT Controlled Substances and Alcohol Policy for Drivers. PM25

Quanex is looking for a Plant Manager to join our team in Cannon Falls, MN! In this role you are the leader of the manufacturing facility. You are accountable for leading a team that meets or exceeds customer, productivity, quality, and financial goals. You are responsible for P&Ls for the location, overseeing all aspects of plant operations and maintenance. You will support company/division initiatives and balance strategic planning with day-to-day operational excellence. You will be expected to establish a culture that embraces safety, teamwork, inclusion, accountability, employee development, and open communication, and key performance metrics. We Offer You! * Competitive Salary * Bonus Potential * 401K with 5% company match, yours to keep after 2 years * 15% immediate return if you participate in the company's ESPP * Medical, Dental & Vision Plans * Employer paid disability plans and life insurance * Paid Time Off & Holidays * Various Work Schedules * Tuition support for degree and continuous education * Employee Resource Groups focused on employee empowerment What's attractive about this position? * Opportunity to partner with a team across the US. * Supportive & collaborative culture * Opportunity to grow within the organization * Monthly Leadership webinars What Success Looks Like: * Safety first mindset- ensuring a safe, clean, and environmentally compliant culture. * Lead and develop talent, succession planning, create a culture of effective performance management and accountability. * Manage key operational functions including Extrusion Operations, Maintenance, Shipping/Receiving, and Quality. * Assure the yield targets are achieved or exceeded through each process of production. * Proactively seek opportunities to create efficiencies and/or savings opportunities while engaging employees and listening to ideas for continuous improvement. * Develop and manage inventory levels to support divisional sales service objectives. Control and administer inventories to achieve proper turns. * Supervise the development of production planning forecasts based on historical data, customer input, and information from the operations leadership and sales. * Assure all production orders are completed on schedule, per budget, and at the quality levels developed by divisional management to satisfy requirements. * Develop and champion an overall continuous improvement and innovation philosophy for the plant. * Ensure the plant is safe, clean, and environmentally compliant and cultivates a culture of safety and accountability. What You Bring: * Ten or more years of progressive manufacturing experience and a minimum of five years in a leadership role. * Experience within extrusion environment preferred. * Bachelor's degree or equivalent in engineering or business-related field. Experience in lieu of education. * Must be receptive to further training or education in operations related areas of focus. * Strong leadership, team building, coaching and ability to build a positive, safe culture while motivating people. * Excellent communication, technical writing skills, problem-solving, decision-making, and influencing skills. * People oriented and results driven. * Strong skills in using MS Office (Word, PowerPoint, Excel). * A high degree of decision-making authority is required to maintain on-time delivery in this just-in-time/ship-by-shift environment. Salary: $110K to130K per year w/ bonus potential About Quanex, A Part of Something Bigger Quanex (NYSE: NX) is a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. We are A Part of Something Bigger by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, dedication to giving back to communities where we operate, producing shareholder value and helping our employees learn, grow, and thrive. Learn more at Quanex.com.

Harmon, Inc. Lead Harmon's communications strategy and program, with emphasis on creating internal communications and content along with external marketing focus. This role will work closely with the Vice President of Human Resources and other leadership team members to create, implement and oversee the communications program. This role is both strategic and tactical to develop a wide range of internal and external communications that build positive awareness of Harmon's brand and value proposition. This position is based in our Bloomington, MN headquarters office with 4 days/week in office and 1 day/week remote. They will report to the Vice President of Human Resources, while also working closely with the Preconstruction (Sales) team. Responsibilities Top priority is to lead and create engaging and effective content for communications across internal and external communication channels such as newsletters, presentations, internal intranet site, external website, videos, social media, etc. Develop and implement strategies/campaigns for internal communication and external marketing. Lead timely and deadline driven execution of company communications schedule. Own communication content creation and collection through strategic partnerships to drive organizational priorities and company initiatives. Monitor and analyze outcomes of corporate communication programs and identify opportunities for improvement. Work closely with parent company, Apogee, to demonstrate branding point of view. Provide oversight of brand and digital assets for proper standards, process, and governance, including trademark and registrations. Manage and oversee the Harmon website, ensuring proper support, content, and monitoring of web activity. Lead one or more marketing team members/graphic designers to support the business and deliver communications in a timely manner. Provide oversight of partnership for specialist supporting preconstruction/sales with collateral, bid binders, proposals, presentations, document and photography libraries. Stay abreast of the latest developments and technologies in the marketing-communications field and recommend best practices to strengthen Harmon's existing communications programs. Experience Bachelor's degree in marketing, communications, public relations, journalism or related field 5 or more years of experience in corporate communications managing communications strategy for a national company Experience directing work, creative teams and/or direct reports Experience authoring internal and external communication pieces Strengths that are important to Harmon Collaborate: Encourage collaboration with your peers and leaders Do the right thing: Deliver excellence, treat each other with respect Value a balanced life: Reward each other's contributions and cultivate a welcoming environment Focus on results: Maintain a strong desire to execute through customer focus and attention to detail Be flexible: Adjust quickly and effectively to shifts in business and project needs Attain clarity and alignment: Ensure you have clarity and alignment before moving forward Strengths that are important for the position Leadership Communication Teamwork Sense of urgency Organizational and project management skills The salary range for this role is $110,000 - 135,000/year + an annual bonus opportunity. #LI-AB1 Our Benefits We care about and invest in our employees. We are proud to offer a comprehensive benefits package designed to support their well-being and foster professional development. Here is a glimpse of what you can look forward to if you join our team. Competitive Benefits Package for employees and their dependents (Medical, Dental, Vision, Life, Disability) Incentive Plans 401(k) with employer contribution and match Employee Stock Purchase Plan with employer match Paid Time Off (Vacation and Sick Time) Paid Holidays Tuition Reimbursement Program Employee Assistance Program (EAP) Wellness Program Training and Career Progression Apogee and our brands are an Equal Opportunity Employer.

**Why Oatey?** Since 1916, Oatey has provided reliable, high-quality products for the residential and commercial plumbing industries, with a commitment to delivering quality, building trust and improving lives. Today, Oatey operates a comprehensive manufacturing and distribution network comprised of industry leading family of companies: Oatey, Cherne, Keeney, Quick Drain, Hercules, Dearborn, GF Thompson, William H. Harvey, Masters, Contact, Belanger, Lansas, and Durgo. At Oatey, we're doing big things - and by joining us, you'll have the chance to do big things too. You can build a strong career in an innovative, inclusive, high-performance environment, with the confidence that your company cares - about you, our customers and our world. **Ready to make an impact in a place where you matter?** **Position Summary:** Responsible for satisfying customer inquiries via fax, phone and internet regarding products and product applications. **Position Responsibilities:** + Work with customers to troubleshoot and resolve product application issues. + Make product recommendations based on customer requirements. + Respond to customer inquiries for product or order information from email, phone, fax or EDI. Coordinate with local sales agent to resolve customer application issues. + Ensure special instructions are clearly communicated in text with appropriate dates, initials, and buyer contacts. + Recommend and up sell products compatible with customer buying patterns and quotations. + Support Lean initiatives. + Edit orders for correct sales and shipping information, and ensure proper price is applied. + Make additions and deletions to existing orders according to existing policy and procedure. + Develop and deliver ongoing product application training for customer service staff, providing technical tips to assist customers. + Provide technical support during on site visits and virtual training. + Enter customer/product complaints/claims into our Quality Form (QF) system. + Answer customer inquiries through Bazaarvoice from our various distributors. **Knowledge and Experience:** + In-depth product knowledge (product attributes and applications) in the Plumbing industry. + In-depth written and oral communication skills. Good listening and questioning skills. + In-depth customer service skills. Ability to problem solve and identify root cause. + Broad understanding of the manufacturing process. + Previous experience in a call center environment. + Previous experience in a technical support role. + PC Computer Proficiency: Word, Excel, etc. + In-depth emotional intelligence: behavioral maturity, demonstrated trust and integrity, high ethical standards, interpersonal competence and the ability to prevent, reduce and resolve conflict. + Bilingual (Spanish) a plus. **Education and Certification:** + Undergraduate degree preferred **Compensation Range for the position** Minimum $56,846 - Midpoint $72,478 - Maximum $88,111 _Offer amount determined by experience and review of internal talent._ At Oatey we are committed to help our Associates grow their career. Apply today and grow with Oatey! **Oatey Total Rewards** + Generous paid time off programs and paid company holidays to support flexibility and work-life balance + Annual Discretionary Cash Profit Sharing + 401(k) with competitive company match + Market leading health insurance including medical, dental, vision, and life insurance offerings for associates and qualified dependents + Significant company contribution to Health Savings Account with a High Deductible Health Plan (HDHP) + Short-Term and Long-Term Disability income protection coverage at no cost to associates + Paid Maternity and Paid Parental Leave + Tuition reimbursement + A robust suite of complementary benefits to support associate well being **Equal Opportunity Employer** The Oatey family of companies are an equal opportunity employer committed to Diversity, Equity, and Inclusion. We recruit, employ, promote, and offer competitive pay for all jobs without regard to race, color, creed, religion, sex, age, national origin, disability, sexual orientation, or any other characteristic protected by law.