Journeyman Electrician jobs at Aerotek

**Job Title: Electrician** **Job Description** This role is responsible for the installation, maintenance, testing, troubleshooting, and repair of the plant's industrial electrical equipment. The position reports directly to the Maintenance Manager. **Responsibilities** + Troubleshoot PLC, VFDs, AC-DC Drives, and relay logic control systems. + Perform control panel troubleshooting and wiring. + Instruct co-workers on PLC/VFD/AC-DC Drive logic. + Use a volt meter; check and replace fuses, motor starters, relays, pumps, motors, and AC-DC systems; and troubleshoot faulty electric circuits. + Assist the general maintenance crew with equipment rebuilds, plant shutdowns, and new equipment installations. + Perform preventive maintenance as prescribed and recommend alterations based on data collected. + Troubleshoot electrical, mechanical, and hydraulic equipment. + Assist all departments with breakdowns. + Follow all safety requirements. + Perform daily maintenance sheets on all plant equipment. + Scope may vary based on the size and complexity of the plant and equipment. + Support CAPEX projects and activities as needed. **Essential Skills** + Electrical troubleshooting and maintenance. + Proficiency with conduit and schematic reading. + Experience with 480v three-phase motors and bending conduit. + PLC troubleshooting. + VFD, AC/DC, AC Drives, and DC Drives knowledge. + Volt meter usage. + Ladder logic understanding. + Project-based maintenance and wiring. **Additional Skills & Qualifications** + 2-year technical degree/electrical certification or equivalent work experience. + 3-5 years of hands-on experience in mechanical and electrical maintenance in an industrial manufacturing environment. + Ability to move from one area to another by stepping over and/or bending under objects. + Mobility sufficient for frequent entrance and exits from lift trucks. + Must be able to wear dust masks, earplugs, and face shields as necessary. + Ability to climb ladders and sense temperature changes in products. + Stand and walk long distances on the plant floor for 8 to 12 hours per shift. + Occasional climbing, reaching, squatting, and bending to operate and fix equipment. + Work in an environment with hot and cold temperatures and occasional loud noises. + Ability to lift, carry, push, and pull up to 50 lbs multiple times per shift. **Why Work Here?** Join a team that values safety, precision, and continuous improvement. Enjoy a clean, well-lit, and organized work environment with a well-organized maintenance shop. Embrace opportunities for professional growth in a supportive and dynamic setting. **Work Environment** The work environment is clean, well-lit, and organized. The maintenance shop is particularly well-organized. Employees are required to wear steel-toed boots, safety glasses, and work gloves for protection. The role involves exposure to external elements, including hot and cold temperatures, and occasional loud noises. Physical activity includes standing and walking long distances on the plant floor for extended shifts. **Job Type & Location** This is a Contract position based out of Elyria, OH. **Pay and Benefits** The pay range for this position is $33.00 - $36.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Elyria,OH. **Application Deadline** This position is anticipated to close on Dec 26, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Salary Range: $70,000 - $80,000 Under the general direction of the Facilities Manager or Director of Facilities, the Facilities Maintenance Lead will lead the local Facilities team with day-to-day tasks/requests and is responsible for the operation and maintenance of facilities, and grounds. Additionally, the Facilities Maintenance Lead is responsible for leading projects or project sections involving the enhancement and design of all interior and exterior occupied space which includes the remodel of existing space and construction of new space. The incumbent leads or assists in, facility inspections, building operations, maintenance, safety, and security. Also included are duties associated with the supervision of facilities employees which report directly to the incumbent. *Position is on-site in our Bloomington, IL office.* Essential Functions and Responsibilities: Perform maintenance (and lead/mentor/supervise team members) to the interior/exterior of facilities including, but not limited to, restrooms, break rooms, sidewalks, and lobby. Perform basic repairs and maintenance of building and equipment such as chairs, tables, doors, light fixtures, floor tiles, walls, pipes/plumbing, vents, ceiling tiles, picnic tables, awnings, and move file cabinets, hang pictures, banners, and decorations. Help keep facilities and grounds free of trash and debris. Analyze, troubleshoot, and research mechanical issues to repair and/or provide recommendations to solve issues. Meet with vendors who provide maintenance to HVAC systems, fire, backflow, plumbing, electrical, security, and generator systems. Ensure routine maintenance to the HVAC systems (belt, filter, and thermostat replacements), and assist with specific maintenance to the systems. Assists in preparing construction specifications and project plans. Directs contracted projects to ensure adherence, follows all specifications. Assists management in solving issues with service providers. Coordinates all facility inspections; report findings and coordinates required repairs and/or replacements. Maintains and controls adequate building temperatures utilizing software systems at sites where applicable. Work with maintenance vendors for mowing, trees, shrubs, bedding areas, and snow removal. Also works with janitorial vendor to ensure quality services are provided. Work with vendors and fuel distributors on preventative maintenance plans. Inspect and perform weekly generator maintenance tests. The above statements are intended to indicate the general nature and level of work being performed by employees within this classification. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of employees assigned to this job. Employees in this job may perform other duties as assigned. Minimum Job Requirements (Education, Experience, Skills): Must be at least 18 years of age and possess a high school diploma or general education Degree (GED) and 5-8 years of relevant experience. Previous knowledge and abilities in electrical, plumbing, carpentry, drywall, painting, office furniture assembly/repair, and reading blueprints is required. Proficient understanding and proper use of hand and power tools is required. Understand, exhibit, identify, and use appropriate safety procedures in all aspects of work. performing proactively and ability to mitigate and control emergency conditions effectively. Previous experience in managing and collaborating with external contractors and vendors is preferred. Ability to provide informal and formal feedback and coaching. Assigns responsibilities that challenge and develop employees. Possess strong customer service skills and seeks collaborative solutions to address customer issues while keeping customers informed of status and progress. Practices active listening skills seeks and considers others point of view when dealing in unfamiliar situations and possesses the ability to maintain confidentiality. Proficiency with Microsoft Office and computers/related applications is preferred. Ability to be on call 24/7 and occasional weekend work will be required. Must have a reliable insured vehicle with valid driver's license and proof of insurance. Physical Demands: Incumbent must be able to push/pull, lift and carry up to 50 pounds. Incumbent must also be able to bend, squat, reach above shoulders, and maneuver body in awkward positions for periods of time. Incumbent must have the ability to stand for extended periods of time. Incumbent must have the ability to climb ladders and be on roof tops. Working Conditions and Environment: Incumbent works in a temperature-controlled office environment. Incumbent sits at a desk during regularly scheduled work hours; answers and makes telephone calls using a standard telephone; types on a standard keyboard; reads and comprehends information from a computer terminal and/or written resources. The incumbent may be required to work outside of normal business hours in emergency situations as needed.

We put the unity in "opportunity." Opportunity Snapshot: Compensation: $35-45/hour, depending on experience Work Schedule: M-F (10+ hours) Assignment Duration: 6 months+ Benefits: Comprehensive insurance, 401(k), PTO and holidays Responsibilities: Knowledge of and experience working with motor control centers safely and effectively Knowledge of and experience working medium voltage equipment and motors safely and effectively Knowledge of or experience working at compressor stations in electrical construction, maintenance, and repair Process controls and tubing experience is preferred Heat trace installation, repair, and maintenance experience required Knowledge of A/C and D/C circuits, as well as electrical theory, ladder logic, read electrical schematics, electrical devices and apparatuses Knowledge of proper power and control troubleshooting (pump panels, instrument devices, relays, breakers, transformers single and three phase, motors etc.) Knowledge of overhead power line and troubleshooting transformer sizing and wiring, fuse coordination is a plus Knowledge of VFD and Soft start devices, operation, and components is a plus but not a requirement Will have to be available for call out rotations Must has knowledge of meters and how to take measurements safely and correctly Qualifications: Licensed Journeyman Texas and/or New Mexico preferred Candidate needs to have good communication skills verbal and written Must have clean driving record for at least 3 years Must work well with others within his/her department and other departments Must have good work ethics honesty, trustworthy, punctual, integrity etc. Must be self-motivated individual and able to coordinate workflow Individual has to be available for on call rotation once put into rotation and be able to manage tasks and workflow accordingly Individual will need to have a good safety culture and will need to conform to ours and be a safety leader in all aspects of day-to-day work and tasks The Bergaila Way: The Bergaila Companies is a nationally recognized leader in providing staffing services to all sectors of the energy industry. We continually focus on partnering with talented professionals, engineering the perfect fit between our clients and employees. Choosing a career path with Bergaila grants you immediate access to nationally recognized organizations we partner with. Bergaila consistently attracts and retains its Employees with our dedicated internal service team, top tier benefits programs for contractors and their families, and commitment to place you in the desired career of your choice. Client Overview: Driven from the bottom up by their innovative and highly engaged employees, our Client takes pride in their collaborative organization where employees continuously learn from one another and are provided with a quality environment in which to work, with a company culture committed to sustainability and corporate responsibility. Based in Houston, Texas, our Client is one of the largest independent (non-integrated) crude oil and natural gas companies in the US.

Year Round At Mammoth Mountain, you will live the dream! Work and play in the majestic mountains with a free season pass that opens the doors to adventure at all Alterra Resorts. Your whole family can share this excitement with free skiing for dependents and a range of valuable discounts. It is more than a job; it is an opportunity to embrace the beauty of Mammoth Lakes, California. Benefits and perks of your adventure here: Ski passes for dependents (spouse/child(ren)/domestic partners) includes free skiing at other Alterra Resorts Free skiing at all Alterra Resorts Ski/snowboarding lessons discounts Equipment Rental discount Friends and Family vouchers Retail & Food discount 401k with company match *Offers of employment may be contingent upon successful completion of a background check A little about this position: This position is responsible for planning and architecting future upgrades along with outlining preventative maintenance plans for all lift and high voltage infrastructure. Requirements: High School Diploma or Equivalent Graduate from an Electrical or Millwright course, equivalent work experience Extensive knowledge of the ANSI code Must be able to communicate efficiently and be able to work in a team environment. Knowledge of Motor Controls and DC/AC Drives Knowledge of PLC systems Knowledge of Relay Logic and Low Voltage Must be able to accurately use and maintain precision measuring devices Demonstrate the ability and willingness to further develop skills, abilities and knowledge on their own. Demonstrate the ability to follow verbal and written instructions. Be able to work flexible work schedules and long hours to complete emergency repairs. Have a strong understanding and working knowledge of OSHA This position requires experience managing, operating, and maintaining high voltage systems. High voltage is defined as 12KV transmission lines, switches, breakers, and associated infrastructure and the step down transformers required to regulator power into a usable voltage and amperage for Mammoth's lifts and facility infrastructure. Hourly pay rate: $35.58 to $42.44 To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. Mammoth Mountain is an equal opportunity employer.

Company eSolutions serves residential, commercial, and industrial electrical needs in North-Cental WV and southern PA. Role Description This is a full-time on-site position for an Electrician in Fairmont, WV. The Electrician will be responsible for performing electrical work, including installation, maintenance, and repair of electrical systems. Day-to-day tasks will include troubleshooting electrical issues, ensuring systems are compliant with safety codes, and providing support for electrical projects. You will collaborate with other team members to ensure timely completion of installations and repairs while adhering to industry standards. Qualifications Proficiency in Electricity and Electrical Work Experience in Maintenance & Repair and Troubleshooting of electrical systems Ability to adhere to safety guidelines and regulatory compliance requirements Strong problem-solving skills and attention to detail Relevant certifications or licenses High school diploma or equivalent Experience is a plus Compensation & Benefits $15-$23/hr starting wage, based on experience and expertise Employer paid health insurance Retirement matching Paid holidays and vacation

The Electrical Foreman is a skilled leadership position responsible for supervising and coordinating the work of electrical crews on commercial and industrial projects. This role requires advanced knowledge of electrical systems, including strong journeyman-level expertise, and a thorough understanding of the National Electrical Code (NEC). The Electrical Foreman ensures that all installations meet safety standards, project specifications, and quality expectations. Key responsibilities include managing day-to-day field operations, collaborating with project managers, subcontractors, and other trades, and mentoring team members. Success in this role is demonstrated by effective communication, proactive problem-solving, and the ability to manage labor, materials, and schedules to meet project goals. Essential Duties and Responsibilities Leading Teams: Responsible for leading and managing a team of electricians and apprentices by assigning tasks, setting clear expectations, and ensuring all work is completed safely, efficiently, and in accordance with project specifications. Oversees daily crew production and provides constructive feedback and timely performance evaluations. Training and Development: Trains new hires and apprentices, while also providing ongoing development opportunities for team members to enhance their skills and job performance. Work Planning and Scheduling: Plans and schedules electrical work to meet project deadlines. Coordinates with project managers, other trades, and reviews blueprints and specifications to allocate labor and resources effectively. Quality Assurance: Conducts regular inspections of work in progress to ensure compliance with project standards, codes, and regulations. Identifies deficiencies and implements corrective actions to maintain high-quality workmanship. Safety Compliance: Enforces all safety policies and procedures. Conducts daily safety meetings and ensures that team members use proper PPE and follow OSHA and company safety guidelines to prevent accidents and injuries. Material and Equipment Management: Manages procurement, inventory, and proper use of materials, tools, and equipment. Ensures timely maintenance and repair of equipment as needed to avoid delays. Communication and Coordination: Maintains clear and consistent communication with project managers, subcontractors, and clients. Coordinates field activities with other trades to ensure efficient and safe jobsite operations. Problem Solving: Troubleshoots on-site issues related to labor, materials, or technical challenges. Implements effective solutions to keep the project on schedule and within scope. Documentation and Reporting: Maintains accurate records of job progress, labor hours, safety incidents, and material usage. Prepares and submits required reports to management and project stakeholders. Conflict Resolution: Addresses conflicts among crew members, subcontractors, or external partners. Uses strong communication and mediation skills to resolve disputes and foster a collaborative working environment. Other: Performs other related duties as assigned. Knowledge Skills And Abilities: Electrical Systems: Comprehensive understanding of electrical systems, including wiring, circuits, transformers, distribution panels, and control systems. Electrical Codes and Regulations: Familiarity with national, state, and local electrical codes and regulations governing construction and installation practices to ensure compliance and safety. Blueprint Reading: Proficiency in reading and interpreting electrical blueprints, schematics, and technical drawings to plan and execute electrical installations accurately. Safety Protocols: Knowledge of occupational health and safety standards and practices, including OSHA regulations, to maintain a safe work environment and prevent accidents and injuries. Materials and Equipment: Understanding of electrical materials, tools, and equipment used in construction and maintenance projects, including their specifications, applications, and proper handling procedures. Troubleshooting: Ability to identify and troubleshoot electrical problems, diagnose faults, and implement effective solutions to resolve issues efficiently. Project Management: Basic project management skills, including planning, scheduling, budgeting, and resource allocation, to coordinate electrical projects effectively and ensure timely completion. Excellent verbal and written communication skills. Excellent interpersonal and customer service skills. Excellent organizational skills and attention to detail. Excellent time management skills with a proven ability to meet deadlines. Strong analytical and problem-solving skills. Strong supervisory and leadership skills. Ability to prioritize tasks and to delegate them when appropriate. Ability to function well in a high-paced and at times stressful environment. Education and Experience: 3 years of experience managing commercial and industrial construction projects. Advanced knowledge of construction and time management Advanced knowledge of NEC Electrical Codes Ability to read and interpret blueprints, plans and project specifications OSHA 10 & OSHA 30 preferred NFPA 70E Physical Demands: Prolonged periods of standing. Ability to walk several miles daily. Ability to climb, crawl, bend. Use of power tools Ability to dig trenches using with hand tools or equipment Must be able to lift up to 75 pounds at times. Ability to work in various weather conditions or confined spaces. Work Environment: Construction environment including high noise levels, moving vehicles and equipment. Outdoors and indoors Climbing ladders, walking and balancing on structural beams

At Colibri, culture is a critical part of our collective success, and we live our values everyday: Love, Joy,Boldness, Teamwork and Curiosity. These values guide our interactions with each other, our customers,and the community as a whole. We have a rich and storied history. Colibri is one of the pioneers of online professional education,introducing some of the first web-based professional education courses in 2001. Today, the company'sfamily of brands are the leading online professional education platforms in their respective end-markets.We proudly serve >1 million customers annually and employ more than 1,500 mission-alignedprofessionals. To learn more, please visit: ******************** Position OverviewWe are currently seeking a Licensed Electrical Contractor to serve as a part-time Instructor/Subject Matter Expert (SME) for our FL Electrical Contractor exam prep program. The purpose of this position is to teach and assist in the preparation of pre-licensing curriculum, with specific focus on both the Business and Finance examination and the Trade examination components of the Florida Electrical Contractor license. This individual will lead online exam preparation classes to help students prepare for and pass their Florida State Contractors Licensing exams. They will provide expert guidance on critical exam topics including project management, electrical codes and standards, safety requirements, and Florida construction law. They may occasionally be asked to assist with updating course content as needed. Other responsibilities may include scripting and filming instructional video content to enhance the online student experience and developing practice questions that mirror the actual exam format.Position Requirements & Major Responsibilities Teach assigned course according to the curriculum plan. Actively engage with students online. Implement teaching strategies that will assist the student in meeting established course objectives. Mentor students and mitigate potential performance issues. Assist with updating course content when needed/required Ability to instruct classes in Florida Electrical Contractor Trade Exam Prep and Business & Finance, as needed Demonstrate comprehensive knowledge of both the Business & Finance and Trade components of the Florida Electrical Contractor's Licensing Board (ECLB) examination Provide detailed instruction on key exam topics including: Florida Electrical Code requirements Construction safety regulations and OSHA requirements Electrical math calculations Contract requirements and business law Other Electrical trade-specific knowledge Create and review practice questions that align with current exam content Stay current with ECLB exam updates and requirements Provide practical insights and exam-taking strategies based on personal experience Develop and maintain study materials that address common exam challenges Guide students through practice exercises and mock exams Maintain knowledge of current construction practices, codes, and regulations Qualifications Prior experience preferred teaching pre-license courses in construction-related trades or professional education. Current license as an Electrical Contractor in the State of Florida. Colibri Group welcomes applicants from all backgrounds and experiences, and we understand that not every candidate will meet every requirement listed in the job description. Research has shown that women and people of color may be less likely to apply to jobs unless they feel they meet every qualification, and we want to actively combat this bias in our hiring process. If you're excited about the role and believe you have the skills and experience to contribute to our team, we encourage you to apply, even if your background doesn't align perfectly with every qualification listed. We are committed to building a diverse and inclusive workplace, and we believe that diversity of perspectives and experiences is essential to our success. You may be just the right candidate for this role or another position within our organization. Don't hesitate to take the leap and apply today!

Company: Prairie Band, LLC Electrical Apprentice Primary Accountabilities: The Electrical Journeyman is responsible for installing, maintaining, and repairing electrical systems in commercial, industrial, and residential settings. They must ensure compliance with all relevant regulations and standards. Additionally, they may be required to assist in troubleshooting electrical issues and implementing solutions. This opportunity will be a full-time temporary position for the duration of 6 1/5 to 8 months. Our Get Volts team (a subsidiary of Prairie Band, LLC) is hiring for an Electrical Apprentice for our Prairie Band LLC, Travel Plaza located on the 150 &75 highway outside of Mayetta, KS - currently under construction. Come join a winning team today! Major Duties: Accomplishes electrical installation and maintenance objectives by performing tasks such as installing electrical wiring, fixtures, and equipment according to local and national electrical codes. Performs routine maintenance and repairs on electrical systems, including troubleshooting, and diagnosing issues. Has responsibility for upgrading existing electrical systems to meet current safety and efficiency standards. Follows all safety protocols and procedures to ensure a safe working environment. Identifies potential safety hazards and takes appropriate measures to mitigate risks. Interprets electrical blueprints, schematics, and technical drawings to plan and execute installations. Assists electricians as needed during installation and repair tasks. Coordinates with other tradespeople, contractors, and project managers to complete projects on time and within budget. Requires infrequent overnight travel. Requirements: Must be able to effectively communicate with clients and team members Must have Journeyman certification Must have the minimum required tool set acquired within 90 days of employment. Must be willing and able to work in all seasons and conditions throughout the year and may be exposed to extreme conditions (hot or cold). Ability to lift up to 50 lbs. 5+ years' experience in construction or a related field is highly desired but must have solid working knowledge of commercial and residential electrical systems. Must be able to pass pre-employment tests (background and drug screen) Must be able to demonstrate attention to safety Must have effective time management skills Must be able to work effectively in a team environment Must have a valid driver's license with good driving records to be insurable. Must have reliable transportation. Must be willing to work extended and varied shifts as required. Must be able to climb stairs, lift. bend, kneel frequently and stand for long periods. Must be able to work in confined spaces, work with heights. Additional Duties: Additional duties and responsibilities may be added to this at any time. The job description does not state or imply that these are the only activities to be performed by the employee holding this position. Employees are required to follow any other job-related instructions and to perform any other job-related responsibilities as requested by their supervisor. Indian Preference Exercised: Prairie Band, LLC is subject to Title 22: Employment Code of the Prairie Band Potawatomi Nation. In accordance with Title 22, this position is designated as a TIER 1 position. Preference will be given to individuals to the extent required pursuant to Section 22-2-4(B). Applicants can apply at: ******************************

Job DescriptionElectrician Supervisor The Electrician Supervisor oversees and coordinates the daily activities of electricians and apprentices to ensure electrical work is completed safely, efficiently, and in compliance with all applicable codes and regulations. This role is responsible for planning work schedules, supervising installations and repairs, enforcing safety standards, and serving as the primary point of contact between field crews, project management, and inspectors. Key Responsibilities Supervise, lead, and mentor electricians and apprentices on commercial, industrial, or utility projects. Plan, assign, and inspect electrical work to ensure compliance with NEC, local codes, and project specifications. Coordinate daily work activities, job assignments, and manpower requirements. Ensure strict adherence to safety policies, Cal/OSHA/OSHA regulations, and company procedures. Read and interpret blueprints, schematics, and technical drawings. Troubleshoot complex electrical issues and provide technical guidance to crews. Conduct job site inspections and quality control checks. Communicate with project managers, engineers, inspectors, and clients to resolve issues and maintain schedules. Maintain accurate records including timecards, material usage, and daily reports. Order materials and ensure tools and equipment are properly maintained. Salary info: $50 - $55 / hr

Job Description Hillard Electric is an electrical contractor serving commercial and industrial customers in the Grand Rapids area since 2005. In 2023, Hillard partnered with Crete United to build a leading commercial/industrial electrical, Communications and Automation contracting company in Michigan. Crete United is one of the largest and fastest growing providers of commercial mechanical, electrical and plumbing (MEP) services in the United States. Partnering with Crete United, Hillard is positioning for significant growth and is seeking an experienced Licensed Michigan Journeyman Electrician to join or growing Service team! *********************** Job Type: Full time permanent position. M-F 7:00 AM -5:00PM Location: Cedar Springs and surrounding counties. Pay: $30.00-$40.00 Per hour DOE + Excellent benefits package! (No out of pocket for employee + Family Medical / Dental / Vision) Job Duties: Install, maintain, and trouble shoot electrical systems in compliance with the National Electric Code. Provided teaching, coaching, and mentoring to apprentices learning the trade. Travels to regionally based customers locations to perform complex industrial and commercial work in construction, and service scenarios. Knowledge of primary installations and terminations. Trouble shoot relay logic & PLC controlled equipment. Maintain compliance with all OSHA, Hillard electric, and customer safety requirements and company policies. Performs wire and cable pulls. Install feeders and makes standard motor connections. Participate in safety talk, audits, and related safety activities. Immediately identify, correct, and/or report unsafe acts, conditions or incidents. Work with Utility Providers. Participate in CPR, First aid, and OHSA 10- hour training. Job Qualifications: Possesses an active Electrical Journeyman's license. (5 Years Min.) Strong knowledge of the most recent National Electric Code. Electrical trouble shooting skills - Motors, control systems, lighting, High and low voltage. Strong problem-solving thought process. Skilled at reading, understanding, and following blueprints and electrical schematics. Mechanical/technical aptitude and a passion for teaching others in this area. Ability to informally lead others, including directing work and coaching for improvement. Demonstrate a focus on safety, quality, customer service and goal attainment. Operates with honesty and integrity. Self-driven, reliable, and able to work independently even under pressure. Solid planning, organizing, time management, communication, and problem-solving skills. Strong teamwork and collaboration with peers and leaders. Ability to travel regionally to project sites, work overtime, and in varied weather conditions required. Benefits: 401K / 401K Matching Medical Dental Vision Vacation / PTO Paid referral program Retirement plan Bonus pay Company Vehicle Schedule: 8 hour shift Day shift Monday to Friday Experience: Electrical: 5 years (Required) License/Certification: MI Electrical Journeyman License (Required) Check out the video link below to learn more about Hillard Electric, a Crete United company! **************************** Crete United is an equal opportunity employer, considering all applicants for employment regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, sexual orientation, genetic information, or any other characteristic protected by state of federal law. Women and minorities are encouraged to apply.

Journeyman Electrician Company: Loenbro Do you want to work for an industry leading, growing, diversified employer who believes in doing what we say, leading by example, doing the right thing, and practicing stewardship? Loenbro is a leader in the industrial and commercial services space who strives to be more than just a contractor to our customer, but a business partner who provides superior quality and service. This is your opportunity to work for a great employer who puts employees and their customers first. We have worked hard to build and maintain our reputation and are looking for industrious, conscientious, and motivated individuals to join our team. We encourage you to visit our website at *************** to learn more about our organization and who we are. Position Overview: Loenbro is looking for Journeyman Electricians in the Nashville, TN area. This is a project position for candidates who have a passion for safety, a initiative-taker, and who have experience in a heavy commercial and industrial environment. The Journeyman Electrician will work independently or as part of a team which will be responsible for the installation, start-up, troubleshooting, commissioning, and servicing of industrial equipment and systems. Job Duties: * Serve existing accounts by analyzing work orders; planning daily travel schedule; investigating complaints; conducting tests; resolving problems. * Establishes service by studying system requirements; ordering and gathering components and parts; completing installation; performing acceptance tests. * Maintains rapport with customers by examining complaints; identifying solutions; suggesting improved methods and techniques; recommending system improvements. * Keeps personal equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; calling for repairs. * Documents service and installation actions by completing forms, reports, logs, and records. * Maintains customer confidence by keeping service information confidential. * Up-dates job knowledge by participating in educational opportunities; reading professional publications. * Accomplishes operations and organization mission by completing related results as needed. * The Electrician will follow and perform other instructions and other related duties as set forth by management. * Capable of reading and understanding overview drawings, one-line drawings, and electrical schematics. * Ability to layout conduit, cable tray, and overall jobsite installations. * Work with and train apprentices on the job. Skills/Qualifications: * Minimum Journeyman Skill level experience in commercial or industrial electrical system * Experience in electrical and pneumatic process controls * Must be dependable, work hard and willing to put in the hours needed. * Have excellent communication skills, both oral and written. * Must be willing to submit to pre-employment screening, including criminal background check and drug screen. * Basic computer knowledge required. * Must be 18 years of age or older. Potential Hazards: * Outside most of the time. * Potential exposure to extreme cold and hot temperatures * Limited working surfaces * Exposure to noise above 85 decibels and intense odors * Exposure to areas with limited visibility * Climbing up and down stairs and ladders to both get in and out of trenches and up to elevated platforms (scaffolding at significant heights) * Lifting necessary equipment and materials 1-50 pounds, 50% of the time monthly for required tasks * If driving is required, a valid driver's license and proof of insurability is required. All drivers are subject to a DMV background records search. Essential Requirements: * Walking on uneven terrain, with an average of two miles per day, Standing * Sit, stoop, crawl, and kneel. * Use of respirator if position requires. * Driving if required to travel. Benefits * Personal Time Off (PTO). * Health Benefits: All employees are eligible for medical, dental, vision and life insurance coverage. * 401(k) Retirement: The Company provides a 100% match of the first 4% of employees' contribution each year, to the plan. Eligibility is immediately following 90 days of employment. We are "Leading the Change" in the Energy Services Industry. Our growth and successes have not changed who we are. We live our core values every day. WE TAKE ACTION WE DO WHAT WE SAY WE LEAD BY EXAMPLE WE DO THE RIGHT THING WE PRACTICE STEWARDSHIP Loenbro is an Equal Opportunity Employer.

Job Description Qualifications: Start Time: 6:30 AM End Time: 3:00 PM Qualifications High school graduate orequivalent At least 3 years of relatedcommercial and industrial electrical maintenance experience Varied electrical andmechanical experience Proven understanding ofelectrical system components and theory Ability to read and understandmechanical, electrical, and equipment drawings Ideally, youll also have: Trade school or technicalprogram diploma Responsibilities: At , we empower communities tofocus on what matters most to them people. Through the delivery of ouroperations and maintenance services, youll make it simpler and more seamlessfor our manufacturing clients to continue to produce their critical productsand innovate for continued improvement. As an Electrician, youll joina team of multi-discipline technical experts, ensuring that our clients candeliver their products and services uninterrupted. Well give you the toolsto become an expert on the electrical systems that support our clientsoperations and keep their people safe. Youll grow your expertise to help yourteam succeed in the safe and time-critical operation, maintenance and repair ofmission-essential electrical equipment and components including low voltage andmedium voltage systems such as chillers, variable frequency drives (VFD),emergency generators, uninterrupted power supply (UPS), panel boards, branchpanels, motor control centers, and related facilities equipment. Youll contribute to thesuccess of our program with efficient preventive maintenance and effectivesolutions to complex challenges that may arise in our clients state of the artfacilities. Most importantly, youlltake actionto ensure the safety, healthand well-being of your team and our planet. Bring your innovative ideas,talent for multi-tasking, and sharp attention to detail to help our clientskeep America up and running. Working Conditions &Physical Requirements: Safety is a core value at . Weare committed to providing a safe and healthy workplace for all employees. Thisposition will spend a substantial amount of time performing safety sensitivelabor or services. The physical and environmentaldemands required to perform the essential duties of this position includestanding, walking, sitting, coordination, balance and agility demands, whichmay include the ability to stoop, kneel, squat, grasp, reach, performrepetitive hand movements. Additional demands may involve a specific level ofdexterity, grip strength, climbing and cardiorespiratory demands. The use ofappropriate safety equipment will be mandatory in these areas to preventhazardous contact. Comments/Special Instructions Electrician II work schedule Mondaythrough Friday 630 AM to 3 PM, will require to go on on call rotating scheduleonce trained.

Job Description Qualifications: Start Time:6:30 AM End Time:3:00 PM ELECTRICIAN - WATER/WASTEWATERTREATMENT FACILITY Basic Qualifications High school diploma or GED. Possess a valid validelectrician certification. Possess a valid driverslicense with a clean driving record. Ideally, youll also have: Five years of experience inthe maintenance of wastewater treatment plants and related equipment, orindustrial setting with experience performing the following: Five years of electricalexperience troubleshooting and repairing: motors, pump controls, VFDs, motoroperated valves, calibrating flow meters, lighting systems and other equipmentrelated to wastewater treatment or similar industrial setting. Proficient in the use of Computerized Maintenance Management Systems (CMMS) Bend/install conduit to complywith NEC code. IR Thermography (basicknowledge) certification is not a requirement but may be asked to try andattain certification. Properly size wire to complywith NEC code. Motor / pulley alignment Troubleshooting a variety ofelectrical and mechanical equipment on site. Ability to prioritize theworkload. Troubleshoot VFD, VFDcontrols, motor windings, lighting systems etc. Proficient in use ofmultimeters, meggers, loop calibrators and other diagnostic equipment. Intermediate knowledge of SCADA controls. Possess a valid driverslicense with no major infractions. Knowledge of the methods,materials, equipment, and instruments used in the maintenance, repair andcalibration of electrical and electronic control systems. Familiarity with theprinciples and practices of wastewater treatment plant operations and processcontrol. Knowledge of the methods,materials, equipment and instruments used in the maintenance, troubleshooting,repair, and calibration of electrical and electronic control systems including distributed Control Systems (DCS); Programmable Logic Controllers (PLC) or PCbased controls; Graphics human machine interface (HMI) or similar IO devices;Instrumentation communication networks (Ethernet, DeviceNet, ControlNet,Profibus) or similar; Servers, drives, actuators, variable frequency drives(VFDs), valves, etc. Knowledge of related state andfederal laws and regulations Working Conditions &Physical Requirements: Safety is a core value at . Weare committed to providing a safe and healthy workplace for all employees. Thisposition will spend a substantial amount of time performing safety sensitivelabor or services. Due to the nature of the job passing a Fitness for Dutytesting is required to ensure candidates for this position are physically andfunctionally fit to perform the essential physical work functions of thissafety sensitive position without posing a direct threat to the health orsafety of themselves or others. The physical and environmentaldemands required to perform the essential duties of this position includestanding, walking, sitting, coordination, balance and agility demands, whichmay include the ability to stoop, kneel, squat, grasp, reach, performrepetitive hand movements. Additional demands may involve a specific level ofdexterity, grip strength, climbing and cardiorespiratory demands. The workareas may be indoor, outdoor, have loud noise, active machinery, high pressurefluid systems, electrical equipment, confined spaces, heights and depths,fumes, air borne particles, noxious gases, and chemicals. The use ofappropriate safety equipment will be mandatory in these areas to preventhazardous contact. Responsibilities: Electrician At , we challenge what iscurrently accepted, so we can shape innovative and lasting solutions fortomorrow. Through the delivery of our operations and maintenance services,youll make it simpler and more seamless for our municipal clients to operatesafely and efficiently, empowering communities to focus on what matters most tothem people. As an Electrician, youll joina collaborative team ensuring that our clients can deliver their services uninterrupted. Based in Hoboken, New Jersey at the North Hudson SewerageAuthority, youll have the opportunity to lead a variety of tasks in thepreventive and corrective maintenance on wastewater treatment plants andrelated facilities equipment on an assigned shift. Youll contribute to thesuccess of our program with efficient preventive maintenance and effectivesolutions to challenges that may arise in municipal facilities. Youll performpredictive, preventive, and corrective maintenance on buildings, structures,grounds, machinery, and lighting equipment; lubricate equipment and check formalfunctions; troubleshoot all electrical systems and subsystems, must know howto properly examine equipment failures to identify root cause and to preventrecurrences; plans and installs new equipment upgrades. Comply with all Healthand Safety Practices and Procedures. Most importantly, youlltake actiontoensure the safety, health and well-being of you and your team. Essential Duties and Responsibilities Assists in planning,scheduling the maintenance and repair of a wide variety of specializedmechanical and electrical equipment in a safe manner. Reads, interprets, and worksfrom blueprints, drawings, sketches, plans, specifications, and mechanicalillustrations. Performs skilled electricalrepair work on water/wastewater treatment plant equipment and relatedequipment. Analyzes equipment failures todetermine cause and to prevent recurrences. Assists Project withrecordkeeping and prepares routine and special reports. Provides on-the-job trainingto less experienced employees. Performs preventive andcorrective and predictive maintenance on mechanical and electrical machinery orequipment. Regularly inspects the workingcondition and maintains the cleanliness and safety of equipment and surroundingareas. Assist with review of capitalimprovement project studies, designs, and contract drawings. Forecast material andequipment needs and performs other duties as required. Comments/Special Instructions Electrician I position to workfor at the North Hudson SewerageAuthority in Hoboken, NJ. Work schedule: Monday through Friday 630 AM to 3 PM,after trained will need to be on rotating on call schedule.

Join our fun and fast-growing Team! We offer an attractive benefits package, including: Being a part of a team of passionate and like-minded professionals! Generous paid vacation and flex days Competitive pay & 401K with company match Bonus Incentive Program Comprehensive Benefit Package including low-cost Industry-Leading PPO and HSA Plans, Medical (with No-cost, single-insured option!), Dental/Vision, Company-paid Life Insurance, AD&D Apprenticeship Program Commitment to growth and development of our employees: On-the-job training and mentorship from industry-leading professionals. Reimbursement for career development courses & licenses Employee & Family Assistance Programs And so much more; come see for yourself! Job Brief: The Superintendent is responsible for overseeing the work of electrical and instrumentation technicians to ensure that projects are completed on time and within budget. Duties & Responsibilities: Supervises crew to ensure that they meet deadlines and quality standards. Monitors projects to ensure that they are completed on time and within budget. Establishes standards for electrical safety in the workplace and making sure they are met. Manages daily activities of the electrical department, including scheduling work tasks and directing crews. Oversees the hiring and training of electrical staff. Interprets electrical blueprints, schematics, and specifications to guide the installation process. Engages in business development activities to assist in growing the business. Develops and coordinates schedules, resource plans, procurement, and project tracking. Controls costs and maximizes productivity by implementing best practices and standard processes. Ensures client satisfaction and address any concerns promptly. Attends progress meetings as requested. Collaborates with the operations manager and project managers to oversee budgets. Monitors project progress, identifies potential risks or delays, and implements effective solutions. Determines resource needs (labor, equipment, and materials) from start to finish and keeps within budgetary limitations. Establishes clear goals and expectations for electricians and provides coaching/counseling for employee growth and development. Plans all construction operations and schedules intermediate phases to ensure deadlines are met. Evaluates progress and prepares detailed reports. Estimates change orders for assigned projects, as necessary. Develops and maintains professional relationships within the industry. Participates/complies with company safety programs & company policies. Other duties as required. Required Skills/Qualifications: Minimum 5 years' experience as an electrical foreman or superintendent Minimum 5 years successfully leading highly innovative and productive EE teams. Must be willing and able to travel as required for business needs, and varying travel schedules depending on project demands. Must be fluent in the use of MS Office and other software. Excellent written and verbal communication skills. Excellent problem solving and project management skills. Proficient knowledge of electrical systems, codes, and regulations. Standard First Aid/CPR with AED, OSHA 30, and Safeland, with preference for OSHA500. Successful completion of a pre-employment drug and alcohol test (required for safety-sensitive roles). Completion of a criminal background check, with results assessed based on relevance to the position. Verification of a clean driving record, as defined by Control Tech's standards (e.g., no major violations, no more than 3 infractions in the past 5 years).

Job Description AC Corp is a Crete United company. As part of this nationwide network, we join an emerging leader in energy efficiency who is focused on making the places where we work, live, and play healthier. Together, we offer customers a multi-service solution to address needs across HVAC, plumbing, electrical, network cabling, security, access control, and building automation. Trust Crete United and AC Corp to make every community better and built-environment more sustainable. Typical Duties Measure, cut, bend, thread, assemble and install electrical conduit. Connect wiring to lighting fixtures and power equipment. Install switches, relays, circuit-breaker panels, etc. Connect power cables to equipment and install grounding leads. Test continuity of circuit to ensure electrical compatibility and safety of components. Observe functioning of installed equipment or system to determine hazards and need for adjustments, relocation or replacement. Repair faulty equipment or systems. Qualifications At least 2 years of electrical experience Able to operate a backhoe Ability to interpret mechanical, plumbing and structural drawings Able to lay out parking lot lighting and install pole bases Ability to think critically and resolve problems Can communicate and give written instruction in a professional manner Comfortable with MS Office (EXCEL, Word, Outlook) Thorough understanding of safety requirements and OSHA guidelines Able to read and understand blueprints, sketches, labels, job site maps/directions, instruction manuals and written instructions accurately Must be high school graduate or hold G.E.D. Must have valid driver's license. Why Join AC Corporation? Competitive pay based on experience Medical, dental, and vision insurance Company-paid life, short- and long-term disability insurance 401(k) with 100% match up to 4% Paid time off and 8 paid holidays Tools, equipment, and company vehicle provided Growth and advancement opportunities with a respected MEP leader “Build The Future with AC Corporation, a Crete United Company” AC Corporation is an Equal Opportunity/Affirmative Action Employer. We welcome and encourage applications from all qualified individuals regardless of race, color, religion, gender, gender identity, sexual orientation, age, national origin, veteran, or disability status. AC Corporation is an equal opportunity employer, considering all applicants for employment regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, sexual orientation, genetic information, or any other characteristic protected by state of federal law. Women and minorities are encouraged to apply.

Job Description Measure, cut, bend, thread, assemble and install electrical conduit. Connect wiring to lighting fixtures and power equipment. Install switches, relays, circuit-breaker panels, etc. Connect power cables to equipment and install grounding leads. Test continuity of circuit to ensure electrical compatibility and safety of components. Observe functioning of installed equipment or system to determine hazards and need for adjustments, relocation or replacement. Repair faulty equipment or systems. Qualifications At least 2 years of electrical experience Able to operate a backhoe Ability to interpret mechanical, plumbing and structural drawings Able to lay out parking lot lighting and install pole bases Ability to think critically and resolve problems Can communicate and give written instruction in a professional manner Comfortable with MS Office (EXCEL, Word, Outlook) Thorough understanding of safety requirements and OSHA guidelines Able to read and understand blueprints, sketches, labels, job site maps/directions, instruction manuals and written instructions accurately Must be high school graduate or hold G.E.D. Must have valid driver's license. Why Join AC Corporation? Competitive pay based on experience Medical, dental, and vision insurance Company-paid life, short- and long-term disability insurance 401(k) with 100% match up to 4% Paid time off and 8 paid holidays Tools, equipment, and company vehicle provided Growth and advancement opportunities with a respected MEP leader “Build The Future with AC Corporation, a Crete United Company” AC Corporation is an Equal Opportunity/Affirmative Action Employer. We welcome and encourage applications from all qualified individuals regardless of race, color, religion, gender, gender identity, sexual orientation, age, national origin, veteran, or disability status. AC Corporation is an equal opportunity employer, considering all applicants for employment regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, sexual orientation, genetic information, or any other characteristic protected by state of federal law. Women and minorities are encouraged to apply.

Now Hiring: Service Journeyman Electrician DFW Area! TradeSTAR is seeking experienced Service Journeyman Electricians to work with one of the industry s top electrical contractors on commercial service projects throughout the Dallas-Fort Worth area. If you have at least 2 years of commercial service experience and enjoy solving electrical challenges on the job, we want to hear from you! What We Offer: Full-time positions with competitive pay Opportunities for overtime Work across a variety of commercial facilities in the DFW area Supportive team environment with opportunities to grow Key Responsibilities: Troubleshoot, repair, and maintain commercial electrical systems Diagnose electrical issues in lighting, panels, wiring, and equipment Read and interpret electrical schematics and blueprints Work safely in accordance with electrical codes and standards Provide excellent service to clients on-site Skills & Experience: Journeyman Electrician license required Minimum of 2 years commercial service experience Strong problem-solving skills and attention to detail Professional communication skills (written and verbal) Knowledge of electrical codes, safety protocols, and proper tool use Valid Driver s License and pass MVR How to Apply: Call ************ or apply in person at 8200 Springwood Dr., Irving, TX 75063 Office Hours: Monday Friday, 8 AM 5 PM

Milestone was founded on the principles of faith, family, and excellence. We are ready to meet any plumbing, electrical, security, cooling, heating or drain cleaning needs. We mean it when we say we strive to be the BEST DFW technicians! Licensed Electricians average about 40+ hours a week making $75k-$145k+ a year! (MUST HAVE RESIDENTIAL EXPERIENCE) Benefits and Perks: -Milestone is the largest privately own Home Service in North America - with no intention to sell to private equity. Our owners are committed to caring for our team better than anyone else would -Competitive pay structure - Top of the market pay opportunities for Plumbers in DFW -Unmatched excellence in company culture -401K matching, Medical, Dental, Vision and more for team members and their families - with perks such as 12 free telehealth primary and urgent care visits -Paid Holidays and Paid Time Off that start as soon as you onboard -$25 per month CrossFit Membership -Company provided uniforms -Stocked Company Truck (we pay fuel, tolls, vehicle maintenance & repairs) -Free RightNow Media subscription -Annual Company and Family Events -Work/ Life balance -Real Estate Benefits- even for first time home buyers -Discounted rates on any services performed at your home through Milestone or it's affiliate companies -Room for advancement and continuing education -Being able to work for one of DFWs "TOP PLACES TO WORK" -Working for 5 x GOLD for DFW'S BEST in Electrical, HVAC & Plumbing Job Description: Licensed Electrician - Diagnose and repair residential and light commercial electrical applications in accordance with the State of Texas Building Codes. - Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem. - Licensed Electrician will inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with all electrical codes. - Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of system. - Perform physically demanding tasks, such as digging trenches to lay conduit, moving, and lifting heavy objects, and crawling through small spaces such as attics. - Willing to learn our system Qualifications: -Must possess a Master, Journeyman or Wireman License with the Texas Department of Licensing & Regulation -1 year minimum of residential electrical experience required -Clean driving record and current valid driver's license -Ability to pass a drug test and background check required -Strong customer service and communication skills -Excellent work ethic and leadership skills -Works well in team environment Physical and Mental Requirements Must be able to lift and move items of 75 pounds and/or more on regular basis and repetitively lift weights of 40 to 50 pounds on raised surfaces Must be able to climb, bend, kneel, crawl and stoop on a frequent basis for extended periods Must be able to work in cramped or high places such as attics, ladders and tunnels Must be able to carry heavy items up and down stairs Must be able to work in extreme weather conditions including but not limited to extreme heat, rain, snow or sleet Must have mental skills such as critical thinking , problem solving, and a technical vocabulary to understand direction and adhere to established procedures. Must be willing to adapt well in the face of workplace stressors such as customer service complaints. Must be able to complete a Job Physical Assessment

Milestone was founded on the principles of faith, family, and excellence. We are ready to meet any plumbing, electrical, cooling, heating or real estate needs. We mean it when we say we strive to be the BEST DFW technicians! Licensed Electricians average about 40+ hours a week making $70k-$145k+ a year! (MUST HAVE RESIDENTIAL EXPERIENCE) Benefits and Perks: -Milestone is the largest privately own Home Service in North America - with no intention to sell to private equity. Our owners are committed to caring for our team better than anyone else would -Competitive pay structure - Top of the market pay opportunities for Plumbers in DFW -Unmatched excellence in company culture -401K matching, Medical, Dental, Vision and more for team members and their families - with perks such as 12 free telehealth primary and urgent care visits -Paid Holidays and Paid Time Off that start as soon as you onboard -$25 per month CrossFit Membership -Company provided uniforms -Stocked Company Truck (we pay fuel, tolls, vehicle maintenance & repairs) -Free RightNow Media subscription -Annual Company and Family Events -Work/ Life balance -Real Estate Benefits- even for first time home buyers -Discounted rates on any services performed at your home through Milestone or it's affiliate companies -Room for advancement and continuing education -Being able to work for one of DFWs "TOP PLACES TO WORK" -Working for 5 x GOLD for DFW'S BEST in Electrical, HVAC & Plumbing Job Description: Licensed Electrician - Diagnose and repair residential and light commercial electrical applications in accordance with the State of Texas Building Codes. - Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem. - Licensed Electrician will inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with all electrical codes. - Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of system. - Perform physically demanding tasks, such as digging trenches to lay conduit, moving, and lifting heavy objects, and crawling through small spaces such as attics. - Willing to learn our system Qualifications: -Must possess a Master, Journeyman or Wireman License with the Texas Department of Licensing & Regulation -1 year minimum of residential electrical experience required -Clean driving record and current valid driver's license -Ability to pass a drug test and background check required -Strong customer service and communication skills -Excellent work ethic and leadership skills -Works well in team environment Physical and Mental Requirements Must be able to lift and move items of 75 pounds and/or more on regular basis and repetitively lift weights of 40 to 50 pounds on raised surfaces Must be able to climb, bend, kneel, crawl and stoop on a frequent basis for extended periods Must be able to work in cramped or high places such as attics, ladders and tunnels Must be able to carry heavy items up and down stairs Must be able to work in extreme weather conditions including but not limited to extreme heat, rain, snow or sleet Must have mental skills such as critical thinking , problem solving, and a technical vocabulary to understand direction and adhere to established procedures. Must be willing to adapt well in the face of workplace stressors such as customer service complaints. Must be able to complete a Job Physical Assessment