Aircraft mechanic jobs in Albany, GA

Aircraft Maintenance Technician (AMT) IMMEDIATELY HIRING! A&P Base Mechanic - Rotor Wing FULL-TIME Opportunity in Gainesville, FL Starting Salary: $63,960 to $93,288 annually IA Stipend 2,080 Sign-On Bonus 12,500 We're hiring an Aircraft Maintenance Technician (AMT) responsible for the overall maintenance and safety of our fleet within Med-Trans. This technician will be qualified to support our EC135 airframe. This is a key role to ensure our team can safely maintain and deliver timely and high-quality transportation services, care and customer service to patients. Responsibilities Aircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. Manage inventory checks to ensure stock of supplies and equipment, regularly update the equipment tracking log, place replacement requests when necessary and document part expenditures. Clearly document service paperwork and FAA information as required and adhere to policies and procedures while complying with the company's information security standards. Take pride in sustaining a safe and clean working environment for the aircraft maintenance team and flight crew. Use appropriate communication methods to help facilitate coordination of efforts between departments, vendors and team members. Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow AMTs and operations team. Minimum Required Qualifications EC135 maintenance experience Three (3) years of turbine helicopter maintenance experience with a minimum of six months helicopter maintenance experience during the last 24 months Valid Airframe and Powerplant (A&P) license Valid State issued Driver's license High School diploma or GED equivalent Federal Aviation Regulations knowledge EMS systems, Aircraft maintenance systems, records and maintenance support and planning Must live within an hour of base Must be acceptable in accordance with the FAA drug and alcohol testing program. Must be able to push and/or pull 100+ lbs. Must be able to lift and/or carry up to 50 lbs. Preferred Qualifications FAA Inspection Authorization Certification Related experience under CFR Part 135 Autopilot maintenance experience Avionics and electrical repair experience Why Choose Med-Trans: As a national leader in air ambulance, Med-Trans is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Check out our careers site benefits page to learn more about our benefit options.

Under limited supervision, the mechanic performs work of moderate difficulty in the repair and maintenance of vehicles and equipment. The mechanic is responsible for the assembly and mechanical function of machines. The mechanic will inspect machines, engines, transmission, etc. and run diagnostic tests to discover functionality issues. The mechanic will be responsible for ensuring the functionality and reliability of machines, engines, and mechanical systems. PRIMARY DUTIES AND RESPONSIBILITIES: This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. Inspect machines, engines, transmissions, etc. and run diagnostic tests to discover functionality issues. Conduct repairs aiming for maximum reliability. Troubleshoot reported problems and resolve them in a timely manner. Perform thorough maintenance on machinery, equipment, and systems. Clean and apply lubricants to machinery components. Replenish fluids and components of engines and machinery. Provide consultation on correct maintenance and preventative measures to machines or vehicle users. Observe equipment in operation to detect potential problems. Inspect mechanical equipment to locate damage, defects, or wear. Undertake other duties as assigned (e.g. repair of hydraulic systems, painting, etc.) KNOWLEDGE, SKILLS, AND ABILITIES: Aptitude in using various hand tools. Excellent knowledge of machinery and hydraulic, electrical and other systems and their components. Ability to follow established procedures and practices and read instructions, blueprints, etc. Effective communication Problem-solving ability COMPETENCIES Safety and Health Technical Capacity Problem Solving Analysis Decision Making Initiative MINIMUM REQUIREMENTS: 18 years or older Education: High School Diploma, GED and/or equivalent work experience. Minimum of one year of mechanic experience preferred. Valid certification (e.g. ASE) is preferred. Familiarity with Fleet Maintenance Pro preferred. MACHINES, TOOLS, EQUIPMENT, AND SOFTWARE USED: MS Office and standard office software including Word, Excel, Explorer/Google Chrome and Outlook Company system applications (scheduling software, Fleet Maintenance Pro, etc.) Calipers, drill press, lockout devices, manlift, etc. WORK ENVIRONMENT: May work indoors or outdoors, but more commonly work indoors. Regularly wear protective gear, such as goggles or earplugs. Are exposed to contaminants, such as antifreeze and chemical degreasers, daily. Are exposed to sounds and noise levels that are distracting. May be exposed to inadequate lighting conditions. May sometimes work in cold or hot temperatures, depending on the work locale. TYPICAL PHYSICAL DEMANDS: Ability to work in confined spaces such as enclosed vehicles, such as trucks, cars, and vans. Lifting and carrying of items weighing up to 50 lbs. Lifting 25 lbs. overhead ten to fifteen times per twelve-hour shift. Up to 50 lbs. overhead five to ten times per twelve-hour shift. Ability to climb ladders Exposure to extreme climate

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Factory Location: Lee, FL Compensation Pay: $35.00 / hour Shift differential: 6%-8% for applicable hours worked Benefits 401(k) matching; dental insurance; flexible spending account; health insurance; life insurance; paid time off and holidays; vision insurance; short-term and long-term disability insurance; career stability and growth! Schedule: 8:00 am - 5:00 pm, Monday - Friday Ability to work holidays and weekends per business needs Responsibilities: Troubleshoot, diagnose and complete repairs on all types of fleet and warehouse equipment including but not limited to: Electric Forklifts, Floor Scrubber, Electric Pallet Jacks, Company Pickup Truck, Pallet Moles, and Dock Door. Performs preventative maintenance on all Fleet and dock doors using prescribed checklists along with identifying and reporting all unsafe conditions. Complete work orders in a timely manner maintaining high quality standards Maintain a clean and safe work area. Manage parts inventory and accurately charging parts and labor to work orders. Perform inspections of work performed by outside vendors prior to putting back in-service Perform mechanical repairs including engine, clutch, oil changes, greasing, transmission, brake repairs, tire changes hoses, belts, fluids and wiring, hydraulic systems, lighting, other electrical systems. Respond to fleet service calls, pick-up and delivery of vehicles and parts. Maintain shop tools and equipment to company standards. Support other locations if needed. Qualifications: High school diploma, GED or equivalent experience Experience with commercial truck repair in manufacturing environment preferred. Mechanical, pneumatic, and hydraulic troubleshooting Power transmission troubleshooting Fabricating and/or machining ability Basic electrical troubleshooting Knowledge of 12/48 volt, propane control power Welding skills an asset CDL an asset Ability to be self-managed, scheduling and performing work often unsupervised Reliable, motivated, dedicated, and committed. Must demonstrate a continuous improvement mindset. Must be able to pass all medical exams, drug and background checks (including criminal). Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members. Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law.

Aircraft Maintenance Technician (AMT) IMMEDIATELY HIRING! A&P Base Mechanic - Rotor Wing FULL-TIME Opportunity in Perry, FL Starting Salary: $63,960 to $93,288 annually IA Stipend 2,080 Sign-On Bonus 12,500 We're hiring an Aircraft Maintenance Technician (AMT) responsible for the overall maintenance and safety of our fleet within Med-Trans. This technician will be qualified to support our Bell 407 airframe. This is a key role to ensure our team can safely maintain and deliver timely and high-quality transportation services, care and customer service to patients. Responsibilities Aircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. Manage inventory checks to ensure stock of supplies and equipment, regularly update the equipment tracking log, place replacement requests when necessary and document part expenditures. Clearly document service paperwork and FAA information as required and adhere to policies and procedures while complying with the company's information security standards. Take pride in sustaining a safe and clean working environment for the aircraft maintenance team and flight crew. Use appropriate communication methods to help facilitate coordination of efforts between departments, vendors and team members. Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow AMTs and operations team. Minimum Required Qualifications Bell 407 maintenance experience Three (3) years of turbine helicopter maintenance experience with a minimum of six months helicopter maintenance experience during the last 24 months Valid Airframe and Powerplant (A&P) license Valid State issued Driver's license High School diploma or GED equivalent Federal Aviation Regulations knowledge EMS systems, Aircraft maintenance systems, records and maintenance support and planning Must live within an hour of base Must be acceptable in accordance with the FAA drug and alcohol testing program. Must be able to push and/or pull 100+ lbs. Must be able to lift and/or carry up to 50 lbs. Preferred Qualifications FAA Inspection Authorization Certification Related experience under CFR Part 135 Autopilot maintenance experience Avionics and electrical repair experience Why Choose Med-Trans: As a national leader in air ambulance, Med-Trans is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Check out our careers site benefits page to learn more about our benefit options.

AWS/CES is looking for several Airframe and Powerplant Mechanics Pay-rate: $35 - $38/hr (more depending on Experience) Must be licensed About the Role: We're seeking a skilled and detail-oriented A&P Mechanic to join our client's team. In this role, you'll perform maintenance, repairs, and inspections on single-engine aircraft. What You'll Do: Use FAA-approved technical data (IPC, AMM, OHM, CMM, etc.) Perform repairs and modifications on airframe, powerplant, and propeller systems Remove, disassemble, install, and test aircraft parts and systems Conduct routine inspections and troubleshoot aircraft systems Operate power tools and necessary equipment Maintain accurate records per Repair Station and Quality Control Manuals Record time worked on aircraft work orders Interpret technical manuals, drawings, and blueprints Communicate professionally with customers and team members Keep work areas clean and organized Tow and park aircraft Support general shop duties (sweeping, mopping, cleaning, etc.) Perform lifting (up to 50 lbs), kneeling, bending, climbing, and working at heights Travel occasionally as needed What We're Looking For: High School Diploma or GED Must be A&P certified 3 years of experience minimum with small engine aircraft Strong basic computer and communication skills Must have your own tools Valid U.S. Driver's License Must pass a pre-employment drug screen and background check Inspection certification is a strong plus Preferred experience with small aircraft such as single-engine airplanes. If interested, please send your resume to ******************************** CESGUS

Employment Type: JSG Contract Client: Gulfstream Savannah 500 City: Savannah State: Georgia Experience Requirement High School Diploma or GED required. 2 years related structural assembly experience. Experience working with Solumina and Smarteam preferred. Must have drilling and countersinking experience. IN-PERSON PLATE TEST IS REQUIRED BEFORE INTERVIEW. Position Purpose In a team oriented work environment, under minimal supervision, Structural Mech II performs a variety of structural assembly operations in a production department following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Essential Functions Principle Duties and Responsibilities: Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements. Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft 2. Rivet structural assemblies and parts using all tools required to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure 3. Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents 4. Check all work and ensure a defective free assembly prior to final inspection 5. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) 6. Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information 7. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity 8. Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required Additional Functions: 1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags 2. Ensure accurate daily job charging to the aircraft 3. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership 4. Assist in maintaining shop equipment and associated JSAs 5. Support Lean Activities Perform other duties as assigned. Other Requirements Must be able to read and interpret blue prints 2. Basic computer skills and basic shop math skills 3. Must be able to read a scale and perform basic shop math 4. Read and comprehend basic documents and instructions 5. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules 6. Must demonstrate good housekeeping and safety practices 7. Ability to work with composite resins and materials 8. Must be able to work any shift 9. Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs 10. Must be able to read, write, speak, and understand the English language JSG offers medical, dental, vision, life insurance options, short-term disability, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. #D500

*Structural Mechanic 4 in GAC Palm Beach* *Unique Skills:* Will train on first shift and then will move to second shift. Individual must be self directed and capable of working with minimal supervision. *Education and Experience Requirements* High School Diploma or GED required. 6 years related structural assembly experience. Experience working with Solumnia and Smarteam preferred.. Q-stamp preferred. In a team oriented work environment, independently performs a variety of structural assembly operations using required. tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. Assists and instructs other team members. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. *Job Description* Principle Duties and Responsibilities:Essential Functions: * Use ability as a skilled specialist to contribute to the development of employees and techniques and completes work in innovative and effective ways . * Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements . * Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications . * Ability to move to new tasks with minimal, short-term impact to established goal hours and schedule . * Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structures . * Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size for rivets, hole pattern for rivets, cutand form plastics and follow standard operating procedures when using adhesives, sealants and solvents . * Check all work and ensure a defect free assembly prior to final inspection . * Mentor, train, and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems . * Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . * Align and assembles parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners . * Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . * Plan and organize workloads and resource requirements to meet or exceed goal hours and schedule expectations. Assist in overseeing projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks . * Maintain a neat and orderly work area, supports the company 5S, Lean Initiative Program, and complies with all safety regulations . * Support Lean Activities, comply with all safety, 5S, and housekeeping policies. Perform other duties as assigned.Other Requirements: * Good working knowledge of computers and related software. * Must be able to read and interpret blue prints. * Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Should be able to use all tools required. to do the job. * Must be able to use mathematical formulas by solving dimensional problems using fractions, decimal fractions and whole numbers. * Thorough knowledge in the use of multiple measuring devices, demonstrated ability to use within specified tolerance. * Must be able to work any shift. * Must be able to lift 50 lbs. * Must be able to climb ladders, stands, stairs and work in small spaces and/or restricted areas. * Must be able to read, write, speak, and understand the English language. *Additional Information* Requisition Number: 229786 Category: Operations Percentage of Travel: Up to 25% Shift: Second Employment Type: Full-time Posting End Date: 01/01/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. [Legal Information]( | [Site Utilities]( | [Contacts]( | [Sitemap]( Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. [A General Dynamics Company]( Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

AXISCADES is a leading, end to end engineering solutions and product company. We bring expertise that caters to the digital, engineering, and smart manufacturing needs of large enterprises. With decades of experience in creating innovative, sustainable, and safer products worldwide, AXISCADES delivers business value across the entire engineering life cycle. Our deep domain expertise and engineering solution portfolio covers the complete product development life cycle from concept evaluation to manufacturing support and certification for the Aerospace, Defence, Heavy Engineering, Automotive, Medical Devices & Industrial Product industries. AXISCADES is headquartered in Bangalore and has offices across India, North America, Europe and the Asia Pacific region. URL: ************************* Our Subsidiaries Mistral Solutions: ******************************** Epcogen - *********************** Add Solutions- ******************************* Title: Aircraft Engineer Location: Mobile, Alabama (100% Onsite) Employment Type: Fulltime Permanent Job Description: Candidate should have very good understanding of Aircraft structure (SA) Should have very good understanding of Aircraft production methods and processes. Should have very good understanding of Airbus methods and processes. Analysis of the non-conformities and propose rework solution (NC assessments) on spot and able to give required info to quality to reduce RTO Processing of NC's & Concessions (T100-ANDD/T200-DCDD Taks) for ATA53, ATA 57 etc.. in accordance with engineering solution already given in NC. Ability to provide rework solutions at station (Shop floor support) Excellent working knowledge and experience of tools- CATIA V5 and CCD. Previous AIRBUS NC Assessment & concession experience is mandatory (Preferably for SA & LR programs). Able to work to tight, demanding deadlines and customer demands. Flexible to work in shifts (2 shifts) Flexible to work on Saturday & holidays based on requirements Tools: CATIAv5, CCD, SAP (PAC / PDA), VPM, TAKSY, Zamiz, AIRNav. “We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status"

Work for a corporation that believes in developing our people. Applied employees believe in the company and love the environment. Individual contributors with fresh ideas and passion for excellence are encouraged and rewarded. Connect with a great stable company with strong performance and growth. Applied Industrial Technologies is seeking a Hydraulic Mechanic to join its Fluid Power Division. POSITION SUMMARY Assemble, disassemble and repair pumps, motors, cylinders and valves. Diagnose problems and identify parts needed to repair. Test all items, perform work in both shop and field environment. ESSENTIAL FUNCTIONS Repairs pumps, motors, cylinders and valves Tear down pumps, motors, cylinders and valves for repair. Identify parts needed to repair. Build new pumps, motors, cylinders and valves. Assist in machine shop as needed. Test completed pumps, motors, valves and cylinders according to written procedures. Clean, lubricate, and adjusts parts, equipment and machinery. Record parts and materials needed and request new parts and materials as necessary. Maintain a neat and orderly shop. Hone/repair barrels. Provide assistance in the installation, troubleshooting and maintenance of mechanical, hydraulic and pneumatic systems and controls. Maintain test stands and equipment in accordance with ISO procedures. Know, understand and abide by environmental policies. Weld as needed. POSITION QUALIFICATIONS - SKILLS AND ABILITIES Experience should demonstrate proficiencies in the following areas: Hands on mechanical aptitude. Ability to pay attention to the minute details of a task. Ability to identify and correct conditions that affect employee safety. Ability to accept responsibility and account for his/her actions. Ability to make decisions while following company procedures. Keep management apprised of work and backlog. Ability to use cranes, and other heavy and light machines, and equipment. Education: High School Graduate or GED/Vocational School Experience: Three years mechanic experience, hydraulic experience preferred Skills taught after hire as needed: ISO Training, Safety Training, Product Training, Maintenance, Quality Training, Forklift Training, Cylinder Repair, Honing, Lathe Operation, Test Stand Operation, Drill Press Operation, Vertical Mill Operation WORK ENVIRONMENT: Works in indoors in an uncontrolled environment with occasional work outside. Work Remotely No Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Employee discount Health insurance Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Schedule: 8 hour shift Monday to Friday

At Disney, we're storytellers. We make the impossible, possible. We do this through utilizing and developing cutting-edge technology and pushing the envelope to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our talented team that delivers unparalleled creative content to audiences around the world. "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire that magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The Attraction Mechanic is more than just a modern day maintenance worker. The Attraction Mechanic is responsible for keeping our parks and attractions in full repair so our Guests get the full enjoyment of our Parks and Resorts. Our first-class shops put efficiency, productivity and concern for the safety of our mechanics front-and-center. Our Attraction Mechanics don't just perform preventative maintenance, they respond to trouble tickets within a theme park setting too. This is a field service position that may include work from elevated platforms and confined spaces throughout the Walt Disney World Parks and Resort property. The pay rate for this role in Florida is $29.59 per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: Basic Qualifications : Valid Florida Driver's License Experience with practices involving millwright mechanical work Minimum of 4 years' experience as a qualified maintenance mechanic Practical experience in repair, troubleshooting and preventative maintenance Experience working on but not limited to gearbox assemblies, bearing replacement, hydraulic and pneumatic systems, restraint systems, brake and wheel assemblies Possess the ability to interpret schematics and prints Use blueprints to verify dimensions, materials, components, and specifications Ability to lift up to 50 pounds Excellent written and interpersonal communication skills Proficiency in standard office software programs and mobile electronic devices Additional Information : Schedule Availability: Our Theme Parks and Resort Hotels operate 24 hours a day, 365 days a year. Schedules and start times are subject to vary. We proudly and enthusiastically encourage qualified individuals with experience in the U.S. Military to apply. KEYWORD: WDW Casting, WDWCASTING, Maintenance, CMC WDW: Walt Disney World Casting Hourly Jobs

PENDING CONTRACT AWARD TASK DESCRIPTION: Aircraft Mechanic III (23023): Leads a team in the performance of aircraft maintenance, inspections, and scheduled / unscheduled maintenance. Processes the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. Capable of performing, supervising and inspecting the duties of Mechanic Is, IIs and IIIs. A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Task Requirements: Performs aircraft maintenance functions of the Line, Corrosion Control, Tool Room and Aircraft Organizational Level maintenance and flight testing support Scheduled and unscheduled maintenance support for assigned MH-60 aircraft Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, surface finish removal, corrosion control, preservation/depreservation services Maintain aircraft and aeronautical equipment to continuously support the assigned SAR readiness posture outlined in in the activities SAR Plan and daily flight schedule. Maintenance Control planning and management Aircraft maintenance action documentation via logs, records, forms, and electronic means Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO). Read and interpret manufacturers' maintenance manuals, military technical manuals, service bulletins, technical data, engineering data, blueprints, manufacturers' drawings, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Flight Line operations/functions at detachment locations as required Confined space operations to include fuel cell entry Support Equipment (SE) operation and inspections Aircraft launch and recovery Aircraft inspections Aircraft movement Support services Corrosion Control Preservation and depreservation General aircraft maintenance Technical Directive compliance and modifications Maintain Aircraft, Engines, and SE Logbooks Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Supervise subordinate mechanics and provide technical guidance on maintenance operations Other duties as assigned Preferred Qualifications: Ten or more years rotary wing maintenance experience Qualified to certify H-60 aircraft Safe-for-Flight Naval Aviation Maintenance Control Management course (C-555-0053) Collateral Duty Quality Assurance Representative (CDQAR) for Airframes, Power Plants and Electrical Systems Collateral Duty Inspector (CDI) f or Line, Corrosion Control and Avionics Systems Quality Assurance Safety Observer (QASO) Ammunition & Explosive handling qualifications Vibration Analysis Operator / Interpreter Tire and Wheel Hydraulic Contamination Plane Captain Landing Signal Enlisted (LSE) Basic Qualifications: Individual (I) Aircraft Maintenance Qualification Must be able to work 1st, 2nd, 3rd and Weekend shift as required Must be able to work flexible schedule Mon-Fri, Sun-Thur and Fri-Mon as required Must be able to provide maintenance support for actual SAR missions within two hours of notification for weekends, holidays, and before/after normal services hours as required Shall be able to travel in support of detachment operations as required Must be eligible for a Common Access Card (CAC) Satisfactory completion of T3/T3R National Agency Check Local Records Check and Credit (NACLC) or Access National Agency Check with written Inquiries (ANACI) resulting in eligibility for a SECRET clearance shall be required of all employees All other FTEs requiring access to Department of Navy (DON) IT systems or access to CUI will require a Favorable T3 investigation initiated by the Government GCA per 5510.30 series and NIMPSOMs and will be enrolled in Continuous Evaluation. All personnel will be vetted through the Contracting Officer Security Representative Must be able to climb ladders, raised platforms, and aircraft Must be able to use hand and power tools Must have dexterity to handle small parts Compensation $41.33/hour Other Compensation Employees will receive a minimum health and welfare fringe benefit of $2.65 for every hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees have a minimum of eleven paid holidays. After completing one year of service, employees will have two weeks paid vacation. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Tactical Air Support Inc. Aircraft Mechanic II Eglin AFB, FL Salary rate: $38.00-$42.00, DOE Tactical Air is currently seeking an Aircraft Mechanic II to join our Maintenance team. This position will support Tactical Air's fleet of fighter aircraft with over 75 years of combined experience in tactical aviation maintenance and more than 30 years of military adversary contract maintenance. The Maintenance staff are a dedicated team comprised of experienced, A&P-certified, and tactical aircraft mechanics, technicians, and logisticians who all work towards ensuring safe and seamless ground maintenance operations. Responsibilities The ideal candidate for the Aircraft Mechanic II will be professional, highly productive, disciplined, team-oriented, technically astute, and responsive to the needs of the company, colleagues, and customers. This position will report to the Senior Site Maintenance Manager, and will perform organizational, intermediate, and limited depot-level maintenance to include inspection, operational test, repair, modification, and troubleshooting on all assigned aircraft, components, and equipment. This position will apply advanced technical knowledge to solve complex problems and to provide technical assistance, guidance, and instruction to other teammates as needed. Requirements * High School diploma/GED with at least 3-5 years of applicable work experience. * Current work experience in aircraft maintenance occupational field, preferably in the military or with a government aviation maintenance contractor. * Experience with high performance military aircraft (F-5/T-38, F-16, F/A-18). * A&P Certification, or ability to obtain certification. * Support Equipment Operator License (Tow Tractor, N2 Servicing Trailer, and Mobile Start Unit at a minimum). * Valid state driver's license. * Must be lawfully eligible to work in the United States, complete a U.S. government I-9 form, and successfully pass a government background check. Desired Experience/Skills * A&P Certification. * F-5/T-38 Experience a plus. Physical Demands * Occasional lifting of up to 50 pounds (with assistance, if required). * Regular use of hands and fingers to handle, feel, or operate objects, tools, or controls; reaching with hands and arms. * Regularly ascend/descend stairs and/or ladders. Work Authorization * Must be lawfully eligible to work in the United States and complete a U.S. government I-9 Form. * Tactical Air Support is a Drug & Alcohol-Free Workplace. Pre-employment, random, or for cause drug/alcohol testing (including for marijuana) required. * Occasional aircraft hangar or warehouse environment with exposure to loud noises, fumes from engines and chemicals, unpredictable climate (hot/cold), and electrical shock, or trip or slip hazards. * May be exposed to or required to handle hazardous materials. * Specific work hours determined by operational, departmental, or contractual requirements. * Occasional evening, weekend, holiday, and overtime work may be required. * Occasional travel to various work sites throughout the U.S. may be required. Tactical Air Support is an EEO/AA/Disabled/Veterans Employer I understand that if an offer of employment is made, I may be required to undergo investigation into all statements and references contained in this application. Said investigation may include credit, driving, criminal background, professional references, and other background checks. By applying for this position, I authorize post-offer investigation into my background as necessary and as a condition of employment. Note: a criminal conviction does not constitute an automatic bar to employment and will be considered only as it substantially relates to the position in question. California Only: You have a right to receive public records documenting an arrest, indictment, conviction, civil judicial action, tax lien, or outstanding judgment that are obtained without using the services of an investigative consumer reporting agency (CA Civil Code §1786.53). Pursuant to California law, you are entitled to waive this right.

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.

*Apprentice Structural Mechanic in GAC Savannah* *Unique Skills:* This position is a full-time The shift will be Mondays through Thursday 1st shift (10 hour days) *Education and Experience Requirements* High School Diploma or GED required. Entry level position. Strong mechanical aptitude. Essential communication skills include the ability to read, write, speak, and understand the English language, and listening and computer keyboard skills. This is an entry-level position in which the individual will be trained in the processes related to the manufacturing and/or service of our aircraft. In a team environment, under direct supervision, perform a variety of structural assembly operations. The apprentice will participate in a structured development program, with the goal of obtaining skills aligned with a fully proficient structural mechanic. *Job Description* Principle Duties and Responsibilities:Essential Functions: * Under specific instruction and guidance, perform fitting of detail parts and basic drilling and riveting operations using basic mechanic hand tools (pneumatic drills, rivet gun, counter sinks, reamers and files, etc.) . * Ensure parts and work content meets the instructions of assigned manufacturing employee and/or Quality Control Inspector . * Learn to read work orders, blueprints, and specification sheets to determine sequence of operation and work requirement . * Align and assembles parts to be riveted using holding fixtures, pins, clamps and fasteners . * Observe and assist to become familiar with parts and assemblies, then works with decreasing supervision as experience is gained . Perform other duties as assigned.Other Requirements: * Must be able to read a scale and perform basic shop math. * Read and comprehend basic documents and instructions. * Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. * Must demonstrate good housekeeping and safety practices. * Proficiency in current personal computer based software. * Must be available to work any shift. * Must be able to lift and transport objects up to 40 pounds. *Additional Information* Requisition Number: 229755 Category: Operations Percentage of Travel: None Shift: First Employment Type: Full-time Posting End Date: 03/31/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. [Legal Information]( | [Site Utilities]( | [Contacts]( | [Sitemap]( Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. [A General Dynamics Company]( Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft #LI-CV1

Johnson Service Group (JSG) is actively seeking A&P Technicians with 3 plus years of experience for a long-term contract in Jacksonville, FL. The A&P Technicians will perform skilled work to identify, Remove, and install aircraft components and to perform servicing of engines and aircraft accessories. Remove and installs aircraft engines. Rig and adjust aircraft secondary systems. Service and repair aircraft and engines to ensure airworthiness according to customer specifications and FAA standards. Reads and complies with instructions and safety information as necessary for proper and safe completion of assigned work. Job Duties and Responsibilities of the A&P Technician are as follows: Other duties may be assigned. Services and repairs aircraft and engines to ensure airworthiness according to customer specifications and FAA standards. Removes and replaces aircraft components. Removes and installs aircraft engines using appropriate procedures and mechanical assistance. Rigs and adjusts aircraft secondary systems. Identifies, removes, and installs inspection access panels. Performs routine servicing of engines and aircraft accessories. Reads maintenance manuals to identify and locate aircraft components on the aircraft, and accurately implements instructions of maintenance manuals. Identifies the structural composition of aircraft (i.e., aluminum or composite) prior to performing any work on the structure. Performs aircraft lubrication. Removes and replaces filters, and performs leak checks. Performs repairs on noted discrepancies, and effectively researches manufacturer's manuals for appropriate repair procedures prior to performing repairs. Using basic hand tools or basic equipment provided, performs skilled manual and technical work as instructed. Follows safety procedures and wears/uses appropriate safety equipment for the work being performed. Reads instructions and safety information as necessary for proper and safe completion of assigned work. Provides instructions and training regarding aircraft work and company procedures and safety standards to personnel assigned to him/her as apprentices, if any. Communicates effectively in English regarding work activities, per FAA requirements. Prepares and maintains simple records such as work order documentation, logs, and time and material records, as instructed. Performs other duties as assigned. Requirements Must have Tools & Tool Box Must possess a minimum. 3 years of Commercial experience Must be able to work any shift JSG offers medical, dental, vision, life insurance options, short-term disability, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

PENDING CONTRACT AWARD TASK DESCRIPTION: Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Task Requirements: Performs aircraft maintenance functions of the Line, Corrosion Control, Tool Room and Aircraft Organizational Level maintenance and flight testing support Scheduled and unscheduled maintenance support for assigned MH-60 aircraft Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, surface finish removal, corrosion control, preservation/depreservation services Maintain aircraft and aeronautical equipment to continuously support the assigned SAR readiness posture outlined in in the activities SAR Plan and daily flight schedule. Aircraft maintenance action documentation via logs, records, forms, and electronic means Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO). Read and interpret manufacturers' maintenance manuals, military technical manuals, service bulletins, technical data, engineering data, blueprints, manufacturers' drawings, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Flight Line operations/functions at detachment locations as required Confined space operations to include fuel cell entry Support Equipment (SE) operation and inspections Aircraft launch and recovery Aircraft inspections Aircraft movement Support services Corrosion Control Preservation and depreservation General aircraft maintenance Technical Directive compliance and modifications Maintain Aircraft, Engines, and SE Logbooks Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Prioritize workloads and lead teams through more complex aircraft relevant tasks Other duties as assigned Preferred Qualifications: Seven or more years of rotary wing maintenance experience Qualified to certify MH-60 aircraft Safe-for-Flight Naval Aviation Maintenance Control Management course (C-555-0053) Collateral Duty Quality Assurance Representative (CDQAR) for Airframes, Power Plants and Electrical Systems Collateral Duty Inspector (CDI) for Line, Corrosion Control and Avionics Systems Quality Assurance Safety Observer (QASO) Ammunition & Explosive handling qualifications Vibration Analysis Operator / Interpreter Tire and Wheel Hydraulic Contamination Plane Captain Landing Signal Enlisted (LSE) Basic Qualifications: Individual (I) Aircraft Maintenance Qualification Three years of rotary wing maintenance experience Must be able to work 1st, 2nd, 3rd and weekend shift or as required Must be able to work flexible schedule Mon-Fri, Sun-Thur and Fri-Mon or as required Must be able to provide maintenance support for actual SAR missions within two hours of notification for weekends, holidays, and before/after normal services hours as required Shall be able to travel in support of detachment operations as required Must be eligible for a Common Access Card (CAC) Satisfactory completion of T3/T3R National Agency Check Local Records Check and Credit (NACLC) or Access National Agency Check with written Inquiries (ANACI) resulting in eligibility for a SECRET clearance shall be required of all employees All other FTEs requiring access to Department of Navy (DON) IT systems or access to CUI will require a Favorable T3 investigation initiated by the Government GCA per 5510.30 series and NIMPSOMs and will be enrolled in Continuous Evaluation. All personnel will be vetted through the Contracting Officer Security Representative Must be able to climb ladders, raised platforms, and aircraft Must be able to use hand and power tools Must have dexterity to handle small parts Compensation $39.58/hour Other Compensation Employees will receive a minimum health and welfare fringe benefit of $2.65 for every hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees have a minimum of eleven paid holidays. After completing one year of service, employees will have two weeks paid vacation. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Job Description Tactical Air Support Inc. Aircraft Mechanic II Eglin AFB, FL Salary rate: $38.00-$42.00, DOE Tactical Air is currently seeking an Aircraft Mechanic II to join our Maintenance team. This position will support Tactical Air's fleet of fighter aircraft with over 75 years of combined experience in tactical aviation maintenance and more than 30 years of military adversary contract maintenance. The Maintenance staff are a dedicated team comprised of experienced, A&P-certified, and tactical aircraft mechanics, technicians, and logisticians who all work towards ensuring safe and seamless ground maintenance operations. Responsibilities The ideal candidate for the Aircraft Mechanic II will be professional, highly productive, disciplined, team-oriented, technically astute, and responsive to the needs of the company, colleagues, and customers. This position will report to the Senior Site Maintenance Manager, and will perform organizational, intermediate, and limited depot-level maintenance to include inspection, operational test, repair, modification, and troubleshooting on all assigned aircraft, components, and equipment. This position will apply advanced technical knowledge to solve complex problems and to provide technical assistance, guidance, and instruction to other teammates as needed. Requirements High School diploma/GED with at least 3-5 years of applicable work experience. Current work experience in aircraft maintenance occupational field, preferably in the military or with a government aviation maintenance contractor. Experience with high performance military aircraft (F-5/T-38, F-16, F/A-18). A&P Certification, or ability to obtain certification. Support Equipment Operator License (Tow Tractor, N2 Servicing Trailer, and Mobile Start Unit at a minimum). Valid state driver's license. Must be lawfully eligible to work in the United States, complete a U.S. government I-9 form, and successfully pass a government background check. Desired Experience/Skills A&P Certification. F-5/T-38 Experience a plus. Physical Demands Occasional lifting of up to 50 pounds (with assistance, if required). Regular use of hands and fingers to handle, feel, or operate objects, tools, or controls; reaching with hands and arms. Regularly ascend/descend stairs and/or ladders. Work Authorization Must be lawfully eligible to work in the United States and complete a U.S. government I-9 Form. Tactical Air Support is a Drug & Alcohol-Free Workplace . Pre-employment, random, or for cause drug/alcohol testing (including for marijuana) required. Occasional aircraft hangar or warehouse environment with exposure to loud noises, fumes from engines and chemicals, unpredictable climate (hot/cold), and electrical shock, or trip or slip hazards. May be exposed to or required to handle hazardous materials. Specific work hours determined by operational, departmental, or contractual requirements. Occasional evening, weekend, holiday, and overtime work may be required. Occasional travel to various work sites throughout the U.S. may be required. Tactical Air Support is an EEO/AA/Disabled/Veterans Employer I understand that if an offer of employment is made, I may be required to undergo investigation into all statements and references contained in this application. Said investigation may include credit, driving, criminal background, professional references, and other background checks. By applying for this position, I authorize post-offer investigation into my background as necessary and as a condition of employment. Note: a criminal conviction does not constitute an automatic bar to employment and will be considered only as it substantially relates to the position in question. California Only : You have a right to receive public records documenting an arrest, indictment, conviction, civil judicial action, tax lien, or outstanding judgment that are obtained without using the services of an investigative consumer reporting agency (CA Civil Code §1786.53). Pursuant to California law, you are entitled to waive this right.

*Structural Mechanic II in GAC Savannah* *Unique Skills:* Must have strong blueprint interpretation skills Must be able to work any shift *Education and Experience Requirements* High School Diploma or GED required. 2 years related structural assembly experience. Experience working with Solumina and Smarteam preferred.. In a team oriented work environment, under minimal supervision, Structural Mech II performs a variety of structural assembly operations in a production department following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. *Job Description* Principle Duties and Responsibilities:Essential Functions: * Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft . * Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure . * Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents . * Check all work and ensure a defective free assembly prior to final inspection . * Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . * Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information . * Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . * Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required. * Able to work with minimal supervision on duties and tasks . * Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) . * Properly use and maintain company-provided tools and equipment and returns items to tool room after use . * Ensure standard operating procedures are followed when operating ground support equipment . Additional Functions: * Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags . * Ensure accurate daily job charging to the aircraft . * Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership . * Assist in maintaining shop equipment and associated JSAs . * Support Lean Activities . Perform other duties as assigned.Other Requirements: * Must be able to read and interpret blue prints. * Basic computer skills and basic shop math skills. * Must be able to read a scale and perform basic shop math. * Read and comprehend basic documents and instructions. * Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. * Must demonstrate good housekeeping and safety practices. * Ability to work with composite resins and materials. * Must be able to work any shift. * Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs. * Must be able to read, write, speak, and understand the English language. *Additional Information* Requisition Number: 229716 Category: Operations Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 02/24/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. [Legal Information]( | [Site Utilities]( | [Contacts]( | [Sitemap]( Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. [A General Dynamics Company]( Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

*Structural Mechanic V - Special Missions in GAC Savannah* *Unique Skills:* Must have strong blueprint interpretation skills Must have corridor experience CMP experience preferred Must be able to work any shift *Education and Experience Requirements* High School Diploma or GED required. 8 years aviation sheet-metal and/or fabrication experience to include at least 1 year of aerospace heavy structures modification such as Special Missions. Valid Driver's License required. The Special Missions Structural Mech V is a technical expert that works with a high degree of accuracy and timeliness under minimal supervision to safely fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train others. *Job Description* Principle Duties and Responsibilities:Essential Functions: * Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications . * Mentor and train as required. Review their work prior to sign off to ensure work complies with quality control standards . * Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents . * Utilizing tools as required. to shape and form complex angles and configurations according to blueprint specifications or written/verbal information . * Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheetmetal functions. Use the proper hardware for various sheetmetal applications . * Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP) . * Conduct monthly 5S audits, as required. * Use the material tracking system to create parts demand, track squawks and to sign-off work . * Assist in developing initiatives to meet individual OGSM requirements, as required. * Assist management, as required. with supervision and instruction of technicians in proper procedures and techniques . Perform other duties as assigned.Other Requirements: * FAA A&P license or be able to obtain a repairman certificate within 30 days of start date. * Advanced knowledge of sheetmetal and fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling). * Ability to read and interpret blueprints and engineering documentation. * Valid drivers license required. to operate towing and other Gulfstream transportation equipment. * Demonstrates excellent communication skills, both verbal and written. * Adapts to sudden schedule changes. * Able to use tools and equipment associated with sheetmetal work. * Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. * Must have a good working knowledge of computers and experience working with MicroSoft Office suite. * Must be able to read, write, speak, and understand the English language. *Additional Information* Requisition Number: 229715 Category: Operations Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 02/24/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. [Legal Information]( | [Site Utilities]( | [Contacts]( | [Sitemap]( Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. [A General Dynamics Company]( Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft