Aircraft mechanic jobs in Arden-Arcade, CA

Before you apply to a job, select your language preference from the options available at the top right of this page. Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. Job Description: This position performs aircraft maintenance on UPS fleet to meet or exceed airworthiness standards. Performs the change, removal, replacement, or upgrade of aircraft components to correct failures or implement changes. Conducts troubleshooting of complex pneumatic, hydraulic, engine, and structural components and systems. This position documents procedures per established processes to ensure regulatory compliance. Job Responsibilities Responsible for the maintenance and preventive maintenance of aircraft Operate and maintain UPS equipment safely Run, taxi, and tow aircraft for the purpose of maintenance and repositioning of aircraft as trained and qualified to do so Determines airworthiness of aircraft and components, in accordance with established procedure and Federal Aviation Regulation Completes aircraft maintenance forms entries and enters data into a Maintenance Data Systems, ensures entries are accurate and complete Services and inspects aircraft, components, and related equipment Ensure consistent, accurate aircraft maintenance by properly completing turnover entries on unfinished maintenance in the turnover log Follow all Maintenance Department policies and procedures Keep a clean and orderly work environment Make recommendations to improve functions within the Maintenance Department Attend UPS assigned training Perform other duties as assigned by Line Maintenance Supervisor or the Director of Maintenance Required Qualifications Must have a High School Diploma or GED equivalent Must have a valid FAA Airframe and Powerplant license Must have a valid driver's license Must have a minimum of three (3) years aircraft maintenance experience that could include but not limited to: Boeing, Airbus and/or McDonnell Douglas aircraft Military jet aircraft Regional /Commuter aircraft Knowledge of computer systems Troubleshooting skills and ability to read and interpret Aircraft Manuals and Illustrated Parts Catalogues Federal Aviation Administration required Drug Testing Information (FAA): As part of the UPS pre-employment process for a safety sensitive position, a drug screen is required. UPS Must receive a negative test result before you can be put into a safety sensitive position (14 CFR Part 120.107). Please be advised that you will be tested in accordance with 14 CFR Part 120.109(a)(5) and 14 CFR 120 Subpart E to determine the presence of marijuana, cocaine, opiates (including codeine, heroin-6AM, morphine), opioids-hydrocodone, hydromorphone, oxycodone & oxymorphone, phencyclidine (PCP), and amphetamines/methamphetamines (including MDMA, MDA) or metabolites of these drugs. Starting Pay: $30.13 Benefits: Competitive weekly pay Medical, dental, and vision after waiting period Defined-benefit pension plan 401(k) Paid vacation Paid holidays Paid Sick and Family and Medical Leave time as required by law Discounted Employee Stock Purchase Program Employee Assistance Program **Please note, you are applying for only the gateway listed in the job title of this position. Employee Type: Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. Basic Qualifications: Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer. Pay Range: For this union-represented posting, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. The starting pay rate for this position starts at $30.13/hr. The company offers the following benefits for this position, subject to applicable eligibility requirements. Weekly pay, extensive training, growth opportunities, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, education assistance program, discounted employee stock purchase program.

Requisition ID # 159726 Job Category: Maintenance / Construction / Operations Job Level: Individual Contributor Business Unit: Electric Operations Work Type: Onsite This posting is to collect applications for the Journey-level Lineworker Line of Progression including Journey-level Lineworkers and Compliance Inspectors. Check out our PG&ELineworker Careers page for information about our locations, benefits as well as other useful information! Department Overview The workers of Electric Transmission and Distribution (T&D) ensure the delivery of safe and reliable electric service to our customers. Electric T&D is responsible for every aspect of PG&E's electric distribution and transmission operations, including planning, engineering, maintenance and construction, asset management, business planning, restoration and emergency response. Our Maintenance Crew is tasked with the Maintenance and/or restoration of high voltage and electrical facilities within PG&E's system. They are our primary crews used for emergency restoration and are the first for call-outs. Our General Construction (GC) Department is comprised of approximately 700 employees, tasked with the Construction and Maintenance of high voltage electrical facilities within PG&E's system. It is a mobile work force that may travel throughout PG&E's service territory to perform its work. Position Summary All Journey Lineworker classifications and the associated line of progression are represented by IBEW Local 1245. This position is a DOT (Department of Transportation) covered classification and is subject to random drug and/or alcohol screening. We are hiring qualified Journey Lineworkers to work throughout our service territory in Distribution and Transmission, Division and General Construction positions, as well as Compliance Inspectors. Open positions are predominantly in California's Central Valley and Bay Area, however additional locations and classifications could become available at any time based on changing business needs. Please note that Transmission T-200 positions require a 2-year commitment to the Transmission Department per LOA 22-18 and T-200 and T-300 positions in De Anza, Peninsula, San Francisco and San Jose require a 3-year commitment per LOA 22-06. This position may be subject to Joint Apprentice Training Committee (JATC) review and approval. Provisional hires will be required to participate in targeted training to achieve journey-level knowledge of Journey Lineworker roles and responsibilities. Journey Lineworkers are responsible for building and maintaining electric power systems and for restoring electric service to commercial, industrial, agricultural and residential customers. They are expected to test, frame and set poles; climb poles, work in confined spaces; splice and terminate cables. Our Lineworkers will have had successfully completed a federal or state sanctioned apprenticeship (with approved supporting documentation) and/or IBEW sponsored line worker apprenticeship. Work is predominantly outdoors and in all weather conditions. Lineworkers must be able to drive safely, work extended hours; travel/transfer to new headquarter upon request at any time (General Construction Positions), and wear company provided Personal Protective Equipment. Compliance Inspectors conduct visual inspections of electric poles and enclosures by driving and or walking the electric distribution system to identify hazards that impact safety, company liability and / or asset life, pursuant to General Order 165. Various diagnostic tests are performed during detail inspections such and infrared imaging, pole shell testing and conductor height measurements. The individual will perform, repair work on poles and substructures as required. PG&E is providing the hourly rate that the company in good faith believes it might pay for this position at the time of the job posting. This position is subject to collectively bargained hourly wage rates and increases. The starting wage rate for this position is $73.78 per hour. This wage rate is specific to the locality of the job. The wage rate is based on multiple factors, including, but not limited to, specific skills, education, licenses or certifications, experience, market value, geographic location, collective bargaining agreements, and internal equity. Job Responsibilities Journey Lineworker * ----------------------------- * Travels to various job locations within geographical assigned region (for General Construction). * Reviews job work requirements and provides input regarding work for the day. * Loads and unloads tools, materials and supplies into and out of vehicles at crew headquarters and job site. * Lifts, pulls and carries insulators, cross-arms, equipment, tools, grounds, dampers, and other materials to and from job sites. * Loads and unloads tools, materials, and equipment off of hand lines while standing on elevated structures that include: Wood poles and insulated work platforms. * Climb poles using boot hooks or aerial lift. * Tests, frames; sets and/or anchors poles; strings electric power lines and install cross-arms. * Performs substation switching; installs and replaces switches, circuit protection equipment, insulators, meters and streetlights. * Hangs and energizes transformers. * Take voltage readings. * Troubleshoots problems and determines extent of repairs on primary and secondary overhead or underground dead legs. * Work will include the use of hand and power tools; digging holes by hand for pole installation; climbing ladders, poles, embankments and towers; working at heights above 35' on poles and in aerial lifts; setting grounds; working with live circuits; and working in trenches, manholes and confined spaces. * Sets and installs underground structures, locates, pulls, removes, splices or terminates cables. * Installs and replaces equipment, meters and streetlights. * Operates hydraulic equipment including: drills, boom truck, digger, pole tamper, hydraulic jack and bucket truck once certified. * Operates lift equipment such as aerial lifts and line truck booms. * Operates forklift to load and unload work materials and supplies. * Travels by vehicle, motor boat or off-road utility vehicle (OUV) to access job sites * May drive a Class A vehicle (i.e. bucket truck and line truck) to and from the job site. May drive a company pickup truck or passenger vehicle to job sites and work locations, meetings and training and will may use vehicle to go to vendor locations and pick up or deliver supplies and materials. * Conducts daily vehicle inspections. * Journey Lineworker may provide back-up relief in temporary absence of Crew Lead; direct work to other crewmembers and act as a leader. * Must attend all mandated OSHA and company training. * Provides on-the-job training, orientation, demonstration and assistance to apprentice lineworkers. Compliance Inspector * ----------------------------- * Receives and reviews work assignments and routes; plans routes, checks directions and locations; obtains vehicle safety inspection. * Drives company vehicle on designated inspections route and /or to offsite training. Fuels vehicle at designated fueling stations as needed. * Inspects the condition of overhead and underground distribution facilities which includes manholes and vaults which require ladder climbing and an environment with tight spaces. * Walks, climbs, bend, kneel, crawls or squats to access structures and equipment. * Lifts metal cabinet doors. * Unlocks / re-locks gates, doors, enclosures and manholes, as needed. * Uses hand and power tools to open access panels, lift manhole covers, remove or secure damaged equipment; remove broken parts or debris; make minor repairs to gain access. * Uses metal detectors to locate buried facilities; infrared sensor to determine status of underground connections. * Communicates in person, by phone and by radio with supervisors/public officials, customers and other departments regarding findings, identified problems, proposed solutions, and estimated time frames and to gain access, as needed. * Perform detailed paper work, documenting work performed, to record site locations, findings, identified problems, proposed solutions, and estimated time frames. * Keep records for equipment repairs and replacements. * Uses log sheets to write up maintenance tags and describe findings in field for entry into database. * Attends daily / regularly schedule tailboard meetings or communicates with supervisor to learn safety guidelines / potential hazards in compliance with Utility standard. * Utilize hand held computers and Global positioning systems (GPS). * Use digital cameras to document field conditions. * Perform journey level line work and minor repairs that can be safely performed without help (e. g. remove low pole steps, repair broken ground moldings, repair high voltage signs and other PG&E identifiers on underground enclosures, remove / repair bolts on lids and locking devices on pad mounted equipment). * Work as part of a construction crew, as needed. Qualifications Minimum: * Completion of a federal or state sanctioned lineworker apprenticeship with approved supporting documentation and/or union or union-affiliated sponsored lineworker apprenticeship * Must possessed a valid California Class A driving permit by first day of employment * Must have passed a California DMV medical exam by first day of employment * Must be at least 18 years of age * High School diploma, GED or equivalent work experience * Ability to wear company provided Personal Protective Equipment (PPE) * Ability to lift and carry up to 100 pounds * Ability to work and drive in all types of weather and road conditions * Capable to work extended hours, nights, weekends and holidays * Ability to travel and transfer to a new headquarter upon request at any time; throughout the entire PG&E service territory * If hired as Provisional, must complete the provisional training plan within one year from hire date. * Successful candidates must pass the following pre-employment requirements prior to beginning employment: drug screen, background check, Post Offer Physical (POPA) Desired: * 2 years of Journey Lineworker experience if an outside line apprenticeship was completed * Completion of Lineworker apprenticeship from a Utility preferred * Utility Journey Lineworker experience preferred * Experienced in rubber gloving and hot stick procedures * Experience in transmission and distribution work, underground and numerous voltages * Effective team player with strong communication skills Pre-Employment Testing PG&E Employees: You must have qualified on all prerequisite tests prior to submitting an application, and all secondary tests prior to interviewing. For more information on prerequisite and secondary exams, including study guides, please visit the Pre-employment testing program website. * Post-Offer Phys Assessment Lineworkers * Journey Assessment of Lineworker Progression #lnmn #featuredjob

Aircraft Component Technician II Company: Gulfstream Aerospace Corporation Aircraft Component Technician II in GAC Lincoln Unique Skills: There is a 1st and 2nd shift opening for this role. The candidate should have knowledge and education to perform electronic troubleshooting and subsequent repair to electronic assemblies and sub assemblies by removing and replacing circuit components, either through hole or surface mount. Must have an excellent soldering skills, be flexible with working overtime, and be a team player. In addition to having a positive attitude, the candidate must be willing to take on other tasks as needed. The compensation range for this role is $29.04 - $33.88 per hour. Final compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience, and location. Gulfstream employees benefit from a total rewards package that includes competitive compensation, comprehensive benefits plans, wellness programs, paid leave and tuition assistance. Our U.S. benefits package includes: * Medical, prescription, dental and vision coverage * Life and disability insurance * Retirement savings plan * Employee assistance plan * Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance. Education and Experience Requirements High School Diploma or GED required. Able to interpret blueprints, engrg docs and use precision measuring tools. Proficient operation of all tools/equip in the dept incl glass bead & carboblast machines. Must possess basic understanding of shop math. 2 years experience in one of the following or other related experience: Sheetmetal, hydraulic overhaul, electrical/electronic harness buildup, electrical systems troubleshooting, battery servicing, APU removal, installation, and servicing. Position Purpose: Under moderate supervision, repair and overhaul internal and external aircraft assemblies, subassemblies and components in accordance with Gulfstream Repair Station requirements. Job Description Principle Duties and Responsibilities: Essential Functions: * Apply basic and some advance skills in procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. * Perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. * Set up, maintain, and operate necessary test equipment in accordance with required. documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. * Inspect all detail parts using blueprints, component and/or overhaul manuals and other required. maintenance data to ensure conformity requirements are met. * Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. * Demonstrate effective repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. * Maintain and utilize all required. paperwork in accordance with FAA RS requirements. * Maintain a clean and orderly work area. * Comply with all company and legislative environmental health and safety regulations. Additional Functions: * Lays-out, removes, fabricates and/or installs major and minor repairs to flight controls and other secondary structure components(I.E: honeycomb core sandwich construction techniques, composite repair techniques, test bench operations, hydraulic press operations, servicing carts) . * Fabricate and repair sheetmetal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. . * Remove & install APUs and perform all required. APU maintenance for ALL Gulfstream aircraft models. . * Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. . * Utilize training and tools to effectively troubleshoot complex electrical circuits and or systems during component repair process. . * Assist with training and instructing of Acft Component Repair I Techs. . * Resolves routine questions and problems, referring the more complex issues to higher levels. . Perform other duties as assigned. Additional Information Requisition Number: 228773 Category: Service Center Percentage of Travel: None Shift: Multiple Shifts Employment Type: Full-time Posting End Date: 12/05/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft #LI-AU1 Job Segment: Hydraulics, Electrical, Aerospace, Engineering, Aviation, Customer Service

Float Aircraft Maintenance Technician (AMT) IMMEDIATELY HIRING! Helicopter Mechanic (Float) FULL-TIME Opportunity in Remote, CA * Please note, Float Mechanics are traveling mechanics and do not need to reside in the state of California. * Starting Salary: $76,752 - $111,946 annually (including 20% geo modifier) * IA Stipend 2,080 * Float Stipend 10,400 * Sign-On Bonus 12,500 We're hiring an Aircraft Maintenance Technician (AMT) float responsible for the overall maintenance and safety of our fleet across multiple locations within the Company footprint. This technician will be qualified to support our EC130, EC135, and AS350 airframes. This is a key role to ensure our team can safely maintain and deliver timely and high-quality transportation services, care and customer service to patients. Responsibilities * Aircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. * Manage inventory checks to ensure stock of supplies and equipment, regularly update the equipment tracking log, place replacement requests when necessary and document part expenditures. * Clearly document service paperwork and FAA information as required and adhere to policies and procedures while complying with the company's information security standards. * Take pride in sustaining a safe and clean working environment for the aircraft maintenance team and flight crew. * Use appropriate communication methods to help facilitate coordination of efforts between departments, vendors and team members. * Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow AMTs and operations team. Minimum Required Qualifications * Three (3) years turboprop and/or turbine powered fixed-wing experience * Valid Airframe and Powerplant (A&P) license * Valid State issued Driver's license * High School diploma or GED equivalent * Federal Aviation Regulations knowledge * EMS Systems, Aircraft maintenance systems, records and maintenance support and planning * Ability to work a flexible schedule including overtime and 24/7 on-call rotations. * Must be acceptable in accordance with the FAA drug and alcohol testing program. * Must be able to push and/or pull 100+ lbs. * Must be able to lift and/or carry up to 50 lbs. Preferred Qualifications * AS350, EC135, EC130 maintenance experience * FAA Inspection Authorization Certificate * Related experience under CFR Parts 133, 135 and 145 * Autopilot maintenance experience * Avionics and electrical repair experience Why Choose REACH? As a quality air medical transport service, REACH is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. Check out our careers site benefits page to learn more about our benefit options. R0047975

Aircraft Component Technician II in GAC Lincoln Unique Skills: There is a 1st and 2nd shift opening for this role. The candidate should have knowledge and education to perform electronic troubleshooting and subsequent repair to electronic assemblies and sub assemblies by removing and replacing circuit components, either through hole or surface mount. Must have an excellent soldering skills, be flexible with working overtime, and be a team player. In addition to having a positive attitude, the candidate must be willing to take on other tasks as needed. The compensation range for this role is $29.04 - $33.88 per hour. Final compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience, and location. Gulfstream employees benefit from a total rewards package that includes competitive compensation, comprehensive benefits plans, wellness programs, paid leave and tuition assistance. Our U.S. benefits package includes: * Medical, prescription, dental and vision coverage * Life and disability insurance * Retirement savings plan * Employee assistance plan * Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance. Education and Experience Requirements High School Diploma or GED required. Able to interpret blueprints, engrg docs and use precision measuring tools. Proficient operation of all tools/equip in the dept incl glass bead & carboblast machines. Must possess basic understanding of shop math. 2 years experience in one of the following or other related experience: Sheetmetal, hydraulic overhaul, electrical/electronic harness buildup, electrical systems troubleshooting, battery servicing, APU removal, installation, and servicing. Position Purpose: Under moderate supervision, repair and overhaul internal and external aircraft assemblies, subassemblies and components in accordance with Gulfstream Repair Station requirements. Job Description Principle Duties and Responsibilities: Essential Functions: * Apply basic and some advance skills in procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. * Perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. * Set up, maintain, and operate necessary test equipment in accordance with required. documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. * Inspect all detail parts using blueprints, component and/or overhaul manuals and other required. maintenance data to ensure conformity requirements are met. * Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. * Demonstrate effective repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. * Maintain and utilize all required. paperwork in accordance with FAA RS requirements. * Maintain a clean and orderly work area. * Comply with all company and legislative environmental health and safety regulations. Additional Functions: * Lays-out, removes, fabricates and/or installs major and minor repairs to flight controls and other secondary structure components(I.E: honeycomb core sandwich construction techniques, composite repair techniques, test bench operations, hydraulic press operations, servicing carts) . * Fabricate and repair sheetmetal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. . * Remove & install APUs and perform all required. APU maintenance for ALL Gulfstream aircraft models. . * Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. . * Utilize training and tools to effectively troubleshoot complex electrical circuits and or systems during component repair process. . * Assist with training and instructing of Acft Component Repair I Techs. . * Resolves routine questions and problems, referring the more complex issues to higher levels. . Perform other duties as assigned. Additional Information Requisition Number: 228773 Category: Service Center Percentage of Travel: None Shift: Multiple Shifts Employment Type: Full-time Posting End Date: 12/23/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft #LI-AU1

Wilson Utility Helicopters has immediate opening for a Base/Field Helicopter Mechanic to support the power line construction helicopter operations in the field and at our Maintenance Facility in Acampo California. Prior Bell 407 and/or Bell 205A++ experienced applicants may be offered a direct 14/14 schedule. Job Requirements: 5 years Total Helicopter Maintenance 2 years of Bell 407 4 Year of Bell 205A++ Experience 2 year of Helicopter Field Maintenance preferred A&P (IA a plus) Familiarity with MS Word, Excel and Outlook Favorable Consideration to: Bell 407 Factory School or Equivalent Bell 205 /212 Maintenance Training Able to obtain a CDL/Hazmat/tanker Mechanics who live in Northern CA Other requirements: Must be willing to travel Must be willing to learn and operate Aeronet (Maintenance Tracking Software) Must be able to establish a safe working relationship with co-workers Must be capable of managing time, work load and parts in field operations Compensation is commensurate with experience and skills. Excellent benefits package including 401K and employer paid medical. Wilson Utility Helicopters is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Alcohol and drug free environment. Successful candidates will be required to pass post-offer and random drug tests. Travel:Yes

SK pharmteco is seeking Industrial Maintenance Mechanics to join our team at our Rancho Cordova, CA (greater Sacramento location). This position does not require any travel off of our property. As a member of the Maintenance department, you will work with other Maintenance professionals and report to a Maintenance Supervisor. Work Performed: Your role will be to maintain, repair, assemble and install chemical plant equipment items such as exhaust blowers, fume hoods, cranes, centrifugal and diaphragm pumps, compressors, processing tanks, vacuum systems, sewage processing equipment, evaporative coolers and mechanical seals, sewage processing equipment, agitators, reactors, gear boxes, exchangers, personnel and material moving equipment and evaporative coolers. Boiler repair and/or surveillance highly desired. May assist other crafts as required under the direction of primary craft. Other Duties: Maintains, repairs, and installs chemical plant plumbing and utility piping on chemical plant facilities. Maintains heating and ventilating systems and air-filtering devices when such systems and devices are not associated with AC and refrigeration systems. Maintains, repairs, and operates . Steam, Compressed Air, Heating Hot Water generation and distribution, Facility fire protection systems and Site Air Emission. Will also be required to perform boiler surveillance as well as performing shop maintenance and clean up. Work assignments include welding, carpentry, metal work and fabrication. Maintains a clean work environment in the chemical plant, shop, grounds, etc., as well as any areas worked in. May assist other crafts as required under the direction of primary craft. The starting hourly rate for this position is $48.19 (plus shift differential). This is a union position. We are a 24/7/365 manufacturing plant and candidate must be open to all shifts including weekends and holidays. This position will either be swing shift or graveyard shift. Our ideal candidate will have at least 4 years of relevant experience and the following credentials/skills: High School or GED Industrial Maintenance experience Preventive Maintenance experience Experience with pumps, piping, plant equipment repair We offer the following benefits: Health Insurance Life Insurance Dental Insurance Vision Insurance 401(k) Health Savings Accounts (HSAs) Medical Flexible Spending Account Dependent Care Flexible Spending Account Tuition Reimbursement Health & Wellness Programs Vacation Leave Sick Leave Holiday Pay Long-Term Disability Short-Term Disability

The Los Rios Community College District is seeking qualified candidates for this part-time, temporary (Adjunct) faculty position. This position is filled on an as needed basis and is an on-going recruitment effort. Applicants are contacted/hired year-round for assignments based on college needs. This pool is open continuously and refreshed every two years. Applicants in this pool will remain active for two years. After two years applicants will receive an email with information on how to remain in the pool. The adjunct faculty member shall be responsible for the following:teaching assigned classes under the supervision of the area dean; helping students fulfill their maximum potential in mastering course content; assessing student learning outcomes; maintaining a thorough and up-to-date knowledge in their regular teaching field; continuing professional development; utilizing current technology in the performance of job duties; maintaining standards of professional conduct and ethics appropriate to the professional position; assisting with articulation and curriculum development and review; serving on college committees and participating in faculty governance including accreditation and student co-curricular activities; assuming other responsibilities as assigned by the area dean; fulfilling other duties and responsibilities of an adjunct faculty member. In addition, the adjunct faculty member will also work closely with the Department Chair in order to keep the approved programs current with FAA regulations and to maintain required documentation. Position Salary Information: Initial maximum salary placement is based on academic degree, upper/graduate level units earned, and/or related professional occupational experience per the Los Rios College Federation of Teachers Contract(the initial maximum placement is Class V, Step 1). For more information on the step placement process, pleaseclick here. Typical Duties The instructional assignment may encompass teaching courses across all levels in this discipline. Courses for this assignment may include: * AMTP 200 - Certificated Aircraft Mechanic Preparation * AMTP 310 - Powerplant Theory and Maintenance Fundamentals - Reciprocating * AMTP 311 - Powerplant Overhaul Applications - Reciprocating Engines * AMTP 312 - Powerplant Theory - Turbine Engine Fundamentals To view a complete list of courses for this discipline, please visit the Programs and Majors webpage for the specific campus: * ARC Programs and Majors * CRC Programs and Majors * FLC Programs and Majors * SCC Programs and Majors Minimum Qualifications * Have any bachelor's degree or higher and two years of experience as an FAA certificated aircraft mechanic; OR any associate degree and six years of experience as an FAA certificated aircraft mechanic; OR the equivalent*. Professional experience is required when the applicant possesses a master's degree. The professional experience required must be directly related to the faculty member's teaching assignment. All degrees must be from an accredited institution completed by time of hire. * Possess and maintain a current Federal Aviation Administration Mechanic certificate or an Airframe and Powerplant certificate by time of hire. * Have an equity-minded focus, responsiveness, and sensitivity to and understanding of the diverse academic, socioeconomic, cultural, disability, gender identity, sexual orientation, and ethnic backgrounds of community college students, including those with physical or learning disabilities as it relates to differences in learning styles; and successfully foster and support an inclusive educational and employment environment. * NOTES: * Degree titles must match the stated minimum qualifications exactly(word-for-word). If your degree title is not exactly the sameas one of the degree titles listed in the minimum qualifications above, you mustsubmit documentation for "equivalency" to be considered for the position. If you fail to submit this documentation and your degree title does not match, you will be disqualified. * Applicants applying under the "equivalent" provisionmustinclude the equivalency review request form detailing and explaining how their academic preparation and/or professional experience is the equivalent of the degree(s) listed in the minimum qualifications. Please visit our website for the form and information on theequivalency determination process. * If you have already been granted equivalency for this discipline, you must attach a copy of your determination form or letter. If you do not attach a copy of your determination form or letter you will be disqualified.If you have misplaced your copy please contact Human Resourcesfor assistance. Application Instructions Applicants applying to this position are REQUIRED to complete and submit: * A Los Rios Community College District Application * Letter of Interest * ResumeorCurriculum Vitae * Unofficial Transcripts from College/University and/or Foreign Transcript Evaluation (see additional instructions) ADDITIONAL INSTRUCTIONS: * Applications submitted without all requireddocuments listed above will be disqualified. * Applications submitted with additional materials NOT requested, will be disqualified. * Only information (education, experience, etc.) listed on the application will be considered for minimum qualifications. * Applicants indicating "see resume" on the application will not have that referenced experience considered for minimum qualifications, which may lead to the application being disqualified. * ONLY copies of transcripts from a US College/University or Foreign Transcript Evaluation will be accepted. Please DO NOTinclude any foreign transcripts. * Individuals who have completed college/university course work at an institution in a country other than the United States must obtaina complete evaluationof foreign transcripts, degrees, and other relevant documents, even if the foreign document has been accepted by another college/university in the United States. * Foreign transcript evaluations are ONLYaccepted from AICE (Association of International Credential Evaluations, Inc.) or NACES (The National Association of Credential Evaluation Services) agencies or evaluators. For additional information on foreign transcript evaluations click here. * Graduate advising documents, certificate of degrees, diplomas, and grade reports will not be accepted as transcripts. Do not submit additional materials that are not requested.

KEEP AIRCRAFT READY FOR TAKEOFF - NOW HIRING AVIATION FUELERS! The Aircraft Fueler ensures safe and efficient aircraft refueling by operating fuel trucks, conducting inspections, managing emergencies, maintaining records, and collaborating with airline personnel to support airport safety and operations. WHAT IT'S LIKE TO WORK AS AN AIRCRAFT FUELER Maintain accurate records of fueling transactions Perform daily quality control inspections on equipment, ensuring cleanliness and functionality Utilize fuel trucks, hydrant carts, and stationary carts to refuel aircrafts Ensure accurate loading and balancing of fuel Conduct defueling procedures as required Exhibit consistent and dependable attendance Exemplify PrimeFlight customer service and safety standards Perform any additional duties as assigned by management WHY WORK FOR PRIMEFLIGHT? Enjoy benefits like 401(k) with matching, health, dental, vision, and life insurance, paid time off, growth opportunities, and more (*part-time benefits may vary) We are committed to being a leading provider of commercial services within the aviation industry Our teams focus on maintaining a positive working environment and treating all team members with respect With more than 200 locations across the world, we offer opportunities for career progression Enjoy a competitive pay scale QUALIFICATIONS 18 years of age or older Eligible to work in the United States Must have a valid state-issued driver's license with an acceptable driving record Communicate effectively in English (reading, writing, speaking) Basic math skills Ability to access and interpret information in print and electronically, including the use of electronic devices including IPads/Tablets, Computers, and Mobile Devices Effectively communicate with colleagues and clients, both in-person and through electronic means Pass a background check and drug screen Eligibility to acquire needed credentials and clearances (FAA, TSA, Port Authority, U.S. Customs and U.S. Postal- as applicable) Airlines are 24/7, so we need our team members to be flexible to work various shifts including nights, weekends and holidays To perform this job successfully, an individual must be able to perform each essential requirement satisfactorily. The requirements listed above are representative of the work environment, knowledge, skill, and/or ability. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential requirements. PHYSICAL ACTIVITY/WORKING CONDITIONS MAY INCLUDE: Ability to lift up to 70 pounds Prolonged standing and walking in an indoor/outdoor environment as applicable Must be able to reach with arms and grasp with hands Must be able to push, pull Must be able to crawl and crouch, at times, in confined tight spaces Must be able to bend, stretch, squat, kneel Must be able to climb and work at elevated heights Exposure to moderate and at times high noise levels Exposure to Biohazards and/or Chemicals Exposure to outdoor elements Be able to hear and respond to the spoken voice and to audible alarms Tasks may involve repetitive motions of the arms, wrists, hands and/or fingers Specific vision abilities required for this job include: Close vision (clear vision at 20 inches or less); distance vision (clear vision at 20 feet or more); peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point); depth perception (three-dimensional vision, ability to judge distances and spatial relationships); ability to adjust focus (ability to adjust the eye to bring an object into sharp focus) The pay rate listed on this post is what the company reasonably expects to pay for this position. However, individual compensation may vary based on factors including qualifications, skills, competencies, education, and experience. PrimeFlight Aviation Services, Inc. is proud to be an equal-opportunity employer. All applicants and employees are considered and evaluated for positions at PrimeFlight Aviation Service, Inc. without regard to race, ethnicity, religion, color, sex, gender, gender identity or expression, sexual orientation, national origin, ancestry, uniform service member and veteran status, marital status, pregnancy, age, protected medical condition, genetic information, disability, or any other protected status in accordance with all applicable federal, state/province, and local laws. SMS/Text Communications By providing your mobile number and opting in, you consent to receive SMS messages from PrimeFlight related solely to recruiting and employment opportunities, such as job postings, application status updates, or interview scheduling. Consent is voluntary and not a condition of applying for employment. Message frequency may vary. Standard message and data rates may apply. Reply STOP to opt out or HELP for assistance. Carriers are not liable for delayed or undelivered messages. Numbers will be used in accordance with this Privacy Policy and not shared for marketing without consent.

Definition: This is the Journey and second working level for certificated Airframe & Powerplant technicians. Incumbents at this level work independently and inspect and repair aircraft, engines, components and systems and assess for damage, condition and method of repair, and work off site at outlying field locations, which may include assignment as a base mechanic. This position may be assigned other duties and tasks in the program as directed. Minimum Qualifications: Possession of the following certificates: FAA Airframe & Powerplant Technician's Certificates and a valid Class-C Driver's License and three years of aerospace industry work experience as a certificated A&P Technician and two years' experience working on type specific aircraft. Military experience may qualify if the level of work and responsibility was equal to that of a certificated A&P Technician. Prior OEM or other outside training and experience on UH-60/S-70 variant aircraft may satisfy the one-year of CAL FIRE specific aircraft requirement. Current CAL FIRE Aviation Program Aircraft Maintenance Technician II who obtain one year of experience and current CAL FIRE Aviation Program Aircraft Maintenance Technician I who obtain two years of experience working on UH-60/S-70 aircraft and successfully complete Original Equipment Manufacturer or other certified outside vendor for line and intermediate level training specific to the aircraft may be eligible for promotion to this position. Knowledge and Abilities: FAA federal aviation regulations pertaining to the maintenance and repair of aircraft; FAA-approved maintenance practices, techniques, and procedures; aircraft shop maintenance operational procedures and fleet aircraft structure, systems, controls, engines and components. May perform Confined Space Entry maintenance to include aircraft fuel tank repairs. Work independently in a central aviation maintenance facility or work unsupervised off site at outlying field locations; perform depot level and field maintenance to aircraft, engines, propellers, rotors, components and systems in accordance with approved procedures; have a thorough working knowledge of all fleet aircraft, engines, and airframe systems; and ability to inspect and determine problems and correct deficiencies, inspect aircraft and systems for continued airworthiness, and return aircraft to service after major and minor maintenance and repair. May be required to become engine run qualified and demonstrate proficiency in their respective program(s) aircraft ground operations. Expect up to 50% travel, including overnight stays to fire bases throughout California Salary and Other Compensation: The hourly rate for this position is $56.76 per hour. Factors which may affect starting pay within this range may include [geography/market, skills, education, experience and other qualifications of the successful candidate.] Benefits: The Company offers the following benefits for this position, subject to applicable eligibility requirements: medical insurance, dental insurance, vision insurance, 401(k) retirement plan, life insurance, long-term disability insurance, short-term disability insurance, Vacation accrued bi-weekly (80 hours) for 1-4.99 years of Company service (increases every 5 years), Personal Leave - accumulates at four (4) hours per pay period to a maximum of thirteen (13) days per calendar year, 10 Recognized Holidays. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Wilson Utility Helicopters has immediate opening for a Base/Field Helicopter Mechanic to support the power line construction helicopter operations in the field and at our Maintenance Facility in Acampo California. Prior Bell 407 and/or Bell 205A++ experienced applicants may be offered a direct 14/14 schedule. Job Requirements: 5 years Total Helicopter Maintenance 2 years of Bell 407 4 Year of Bell 205A++ Experience 2 year of Helicopter Field Maintenance preferred A&P (IA a plus) Familiarity with MS Word, Excel and Outlook Favorable Consideration to: Bell 407 Factory School or Equivalent Bell 205 /212 Maintenance Training Able to obtain a CDL/Hazmat/tanker Mechanics who live in Northern CA Other requirements: Must be willing to travel Must be willing to learn and operate Aeronet (Maintenance Tracking Software) Must be able to establish a safe working relationship with co-workers Must be capable of managing time, work load and parts in field operations Compensation is commensurate with experience and skills. Excellent benefits package including 401K and employer paid medical. Wilson Utility Helicopters is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Alcohol and drug free environment. Successful candidates will be required to pass post-offer and random drug tests. Travel: Yes

Aircraft Maintenance Technician (AMT) IMMEDIATELY HIRING! Helicopter Mechanic FULL-TIME Opportunity in McClellan, CA * Starting Salary: $73,554-$107,281 annually (including 15% geo modifier) * IA Stipend 2,080 * Sign-On Bonus 12,500 We're hiring an Aircraft Maintenance Technician (AMT) responsible for the overall maintenance and safety of our fleet within Reach Air Medical Services. This technician will be qualified to support our H125, H130, H135, EC145 airframe. This is a key role to ensure our team can safely maintain and deliver timely and high-quality transportation services, care and customer service to patients. Responsibilities * Aircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. * Manage inventory checks to ensure stock of supplies and equipment, regularly update the equipment tracking log, place replacement requests when necessary and document part expenditures. * Clearly document service paperwork and FAA information as required and adhere to policies and procedures while complying with the company's information security standards. * Take pride in sustaining a safe and clean working environment for the aircraft maintenance team and flight crew. * Use appropriate communication methods to help facilitate coordination of efforts between departments, vendors and team members. * Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow AMTs and operations team. Minimum Required Qualifications * Three (3) years turbine powered helicopter experience * Valid Airframe and Powerplant (A&P) license * Valid State issued Driver's license * High School diploma or GED equivalent * Federal Aviation Regulations knowledge * EMS Systems, Aircraft maintenance systems, records and maintenance support and planning * Ability to work a flexible schedule including overtime and 24/7 on-call rotations. * Must be acceptable in accordance with the FAA drug and alcohol testing program. * Must be able to push and/or pull 100+ lbs. * Must be able to lift and/or carry up to 50 lbs. Preferred Qualifications * AS350, EC130, EC135, EC145 maintenance experience * FAA Inspection Authorization Certificate * Related experience under CFR Parts 91, 135 and 145 * Autopilot maintenance experience * Avionics and electrical repair experience Why Choose REACH? As a quality air medical transport service, REACH is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. Check out our careers site benefits page to learn more about our benefit options. R0044963

Job Description SKpharmteco is a custom manufacturer of active pharmaceutical ingredients and registered intermediates for customers in the pharmaceutical industry. We are looking for a Chemical Plant Refrigeration Mechanic to join our team at our Rancho Cordova, CA location. This position DOES NOT require any travel and the duties performed will be at one location. Our company offers competitive medical, dental, vision, life insurance and 401k benefits starting the first of the month after hire date. This is a union position with Local Lodge 946, International Association of Machinists and Aerospace Workers. WORK PERFORMED Maintain Process Cooling Systems (Sub-Zero Chillers, Cooling Towers, and Industrial HVAC systems). Installs, overhauls, services, and maintains air conditioning, heating and refrigeration equipment as related to refrigeration and air conditioning systems. Provides maintenance and construction support for all types of refrigeration systems in fine chemical and pharmaceutical production plants, pilot plants and laboratories. Maintains humidity control equipment. Trouble shoots, diagnoses, and makes incidental repairs to electrical and instrumentation equipment associated with the air conditioning and refrigeration systems. Assembles, disassembles, replaces or repairs worn and/or defective parts as required on all control components, energy saving devices, back to 480 panel. Periodically checks and makes mechanical adjustments to equipment to ensure efficient operation and determine need for repairs, replacement, or overhaul. Installs and repairs insulation in support of the job duties described herein. Uses all types of mechanic hand and power tools, hand torches, flaring tools and test equipment required performing work described herein. May assist other crafts as required under the direction of the primary craft. Maintains a clean work environment in the plant, shop, grounds, etc., as well as any areas worked in. Computer use to include entry of work orders, investigation of parts, access manuals and training. QUALIFICATIONS High school graduate or equivalent, preferably trade or vocational school. Four (4) years commercial or industrial experience in refrigeration and air conditioning service work. Must also hold current valid CFC certification card and adhere to all state and federal regulations regarding the handling, charging and recovery of refrigerant. Must have mechanical skills necessary to perform the work described above, must be able to read, understand and follow written and verbal instructions and procedures. Must also be able to maintain a high level of performance and teamwork to keep the chemical plant facility up to maximum production levels

**Definition** : This is the Journey and second working level for certificated Airframe & Powerplant technicians. Incumbents at this level work independently and inspect and repair aircraft, engines, components and systems and assess for damage, condition and method of repair, and work off site at outlying field locations, which may include assignment as a base mechanic. This position may be assigned other duties and tasks in the program as directed. **Minimum Qualifications:** Possession of the following certificates: FAA Airframe & Powerplant Technician's Certificates and a valid Class-C Driver's License and three years of aerospace industry work experience as a certificated A&P Technician and two years' experience working on type specific aircraft. Military experience may qualify if the level of work and responsibility was equal to that of a certificated A&P Technician. Prior OEM or other outside training and experience on UH-60/S-70 variant aircraft may satisfy the one-year of CAL FIRE specific aircraft requirement. Current CAL FIRE Aviation Program Aircraft Maintenance Technician II who obtain one year of experience and current CAL FIRE Aviation Program Aircraft Maintenance Technician I who obtain two years of experience working on UH-60/S-70 aircraft and successfully complete Original Equipment Manufacturer or other certified outside vendor for line and intermediate level training specific to the aircraft may be eligible for promotion to this position. **Knowledge and Abilities:** FAA federal aviation regulations pertaining to the maintenance and repair of aircraft; FAA-approved maintenance practices, techniques, and procedures; aircraft shop maintenance operational procedures and fleet aircraft structure, systems, controls, engines and components. May perform Confined Space Entry maintenance to include aircraft fuel tank repairs. Work independently in a central aviation maintenance facility or work unsupervised off site at outlying field locations; perform depot level and field maintenance to aircraft, engines, propellers, rotors, components and systems in accordance with approved procedures; have a thorough working knowledge of all fleet aircraft, engines, and airframe systems; and ability to inspect and determine problems and correct deficiencies, inspect aircraft and systems for continued airworthiness, and return aircraft to service after major and minor maintenance and repair. May be required to become engine run qualified and demonstrate proficiency in their respective program(s) aircraft ground operations. ** **Expect up to 50% travel, including overnight stays to fire bases throughout California**** **Salary and Other Compensation:** The hourly rate for this position is $56.76 per hour. Factors which may affect starting pay within this range may include [geography/market, skills, education, experience and other qualifications of the successful candidate.] **Benefits:** The Company offers the following benefits for this position, subject to applicable eligibility requirements: medical insurance, dental insurance, vision insurance, 401(k) retirement plan, life insurance, long-term disability insurance, short-term disability insurance, Vacation accrued bi-weekly (80 hours) for 1-4.99 years of Company service (increases every 5 years), Personal Leave - accumulates at four (4) hours per pay period to a maximum of thirteen (13) days per calendar year, 10 Recognized Holidays. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

Aircraft Maintenance Technician (AMT) IMMEDIATELY HIRING! Helicopter Mechanic FULL-TIME Opportunity in McClellan, CA * Starting Salary: $73,554-$107,281 annually (including 15% geo modifier) * IA Stipend 2,080 * Sign-On Bonus 12,500 We're hiring an Aircraft Maintenance Technician (AMT) responsible for the overall maintenance and safety of our fleet within Reach Air Medical Services. This technician will be qualified to support our H125, H130, H135, EC145 airframe. This is a key role to ensure our team can safely maintain and deliver timely and high-quality transportation services, care and customer service to patients. Responsibilities * Aircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. * Manage inventory checks to ensure stock of supplies and equipment, regularly update the equipment tracking log, place replacement requests when necessary and document part expenditures. * Clearly document service paperwork and FAA information as required and adhere to policies and procedures while complying with the company's information security standards. * Take pride in sustaining a safe and clean working environment for the aircraft maintenance team and flight crew. * Use appropriate communication methods to help facilitate coordination of efforts between departments, vendors and team members. * Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow AMTs and operations team. Minimum Required Qualifications * Three (3) years turbine powered helicopter experience * Valid Airframe and Powerplant (A&P) license * Valid State issued Driver's license * High School diploma or GED equivalent * Federal Aviation Regulations knowledge * EMS Systems, Aircraft maintenance systems, records and maintenance support and planning * Ability to work a flexible schedule including overtime and 24/7 on-call rotations. * Must be acceptable in accordance with the FAA drug and alcohol testing program. * Must be able to push and/or pull 100+ lbs. * Must be able to lift and/or carry up to 50 lbs. Preferred Qualifications * AS350, EC130, EC135, EC145 maintenance experience * FAA Inspection Authorization Certificate * Related experience under CFR Parts 91, 135 and 145 * Autopilot maintenance experience * Avionics and electrical repair experience Why Choose REACH? As a quality air medical transport service, REACH is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. Check out our careers site benefits page to learn more about our benefit options. R0048966

SKpharmteco is a custom manufacturer of active pharmaceutical ingredients and registered intermediates for customers in the pharmaceutical industry. We are looking for a Chemical Plant Refrigeration Mechanic to join our team at our Rancho Cordova, CA location. This position DOES NOT require any travel and the duties performed will be at one location. Our company offers competitive medical, dental, vision, life insurance and 401k benefits starting the first of the month after hire date. This is a union position with Local Lodge 946, International Association of Machinists and Aerospace Workers. WORK PERFORMED Maintain Process Cooling Systems (Sub-Zero Chillers, Cooling Towers, and Industrial HVAC systems). Installs, overhauls, services, and maintains air conditioning, heating and refrigeration equipment as related to refrigeration and air conditioning systems. Provides maintenance and construction support for all types of refrigeration systems in fine chemical and pharmaceutical production plants, pilot plants and laboratories. Maintains humidity control equipment. Trouble shoots, diagnoses, and makes incidental repairs to electrical and instrumentation equipment associated with the air conditioning and refrigeration systems. Assembles, disassembles, replaces or repairs worn and/or defective parts as required on all control components, energy saving devices, back to 480 panel. Periodically checks and makes mechanical adjustments to equipment to ensure efficient operation and determine need for repairs, replacement, or overhaul. Installs and repairs insulation in support of the job duties described herein. Uses all types of mechanic hand and power tools, hand torches, flaring tools and test equipment required performing work described herein. May assist other crafts as required under the direction of the primary craft. Maintains a clean work environment in the plant, shop, grounds, etc., as well as any areas worked in. Computer use to include entry of work orders, investigation of parts, access manuals and training. QUALIFICATIONS High school graduate or equivalent, preferably trade or vocational school. Four (4) years commercial or industrial experience in refrigeration and air conditioning service work. Must also hold current valid CFC certification card and adhere to all state and federal regulations regarding the handling, charging and recovery of refrigerant. Must have mechanical skills necessary to perform the work described above, must be able to read, understand and follow written and verbal instructions and procedures. Must also be able to maintain a high level of performance and teamwork to keep the chemical plant facility up to maximum production levels

**Definition** : This is the Journey and second working level for certificated Airframe & Powerplant technicians. Incumbents at this level work independently and inspect and repair aircraft, engines, components and systems and assess for damage, condition and method of repair, and work off site at outlying field locations, which may include assignment as a base mechanic. This position may be assigned other duties and tasks in the program as directed. **Minimum Qualifications:** Possession of the following certificates: FAA Airframe & Powerplant Technician's Certificates and a valid Class-C Driver's License and three years of aerospace industry work experience as a certificated A&P Technician and two years' experience working on type specific aircraft. Military experience may qualify if the level of work and responsibility was equal to that of a certificated A&P Technician. Prior OEM or other outside training and experience on UH-60/S-70 variant aircraft may satisfy the one-year of CAL FIRE specific aircraft requirement. Current CAL FIRE Aviation Program Aircraft Maintenance Technician II who obtain one year of experience and current CAL FIRE Aviation Program Aircraft Maintenance Technician I who obtain two years of experience working on UH-60/S-70 aircraft and successfully complete Original Equipment Manufacturer or other certified outside vendor for line and intermediate level training specific to the aircraft may be eligible for promotion to this position. **Knowledge and Abilities:** FAA federal aviation regulations pertaining to the maintenance and repair of aircraft; FAA-approved maintenance practices, techniques, and procedures; aircraft shop maintenance operational procedures and fleet aircraft structure, systems, controls, engines and components. May perform Confined Space Entry maintenance to include aircraft fuel tank repairs. Work independently in a central aviation maintenance facility or work unsupervised off site at outlying field locations; perform depot level and field maintenance to aircraft, engines, propellers, rotors, components and systems in accordance with approved procedures; have a thorough working knowledge of all fleet aircraft, engines, and airframe systems; and ability to inspect and determine problems and correct deficiencies, inspect aircraft and systems for continued airworthiness, and return aircraft to service after major and minor maintenance and repair. May be required to become engine run qualified and demonstrate proficiency in their respective program(s) aircraft ground operations. ** **Expect up to 50% travel, including overnight stays to fire bases throughout California**** **Salary and Other Compensation:** The hourly rate for this position is $56.76 per hour. Factors which may affect starting pay within this range may include [geography/market, skills, education, experience and other qualifications of the successful candidate.] **Benefits:** The Company offers the following benefits for this position, subject to applicable eligibility requirements: medical insurance, dental insurance, vision insurance, 401(k) retirement plan, life insurance, long-term disability insurance, short-term disability insurance, Vacation accrued bi-weekly (80 hours) for 1-4.99 years of Company service (increases every 5 years), Personal Leave - accumulates at four (4) hours per pay period to a maximum of thirteen (13) days per calendar year, 10 Recognized Holidays. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

Definition: This is the journey and second working level for certificated Airframe & Powerplant technicians. Incumbents at this level work independently and inspect and repair aircraft, engines, components and systems and assess for damage, condition and method of repair, and work off site at outlying field locations, which may include assignment as a base mechanic. This position may be assigned other duties and tasks in the program as directed. Minimum Qualifications: Possession of the following certificates: FAA Airframe & Powerplant Technician's certificates and a valid Class-C California driver's license and five (5) years of aerospace industry work experience as a certificated A&P Technician and Two (2) years' experience working on C-130 Aircraft. Military experience may qualify if the level of work and responsibility was equal to that of a certificated A&P Technician. Prior OEM or other outside training and experience on C-130 variant aircraft may satisfy the one-year of CAL FIRE specific aircraft requirement. Knowledge and Abilities: FAA federal aviation regulations pertaining to the maintenance and repair of aircraft; FAA-approved maintenance practices, techniques, and procedures; aircraft shop maintenance operational procedures and fleet aircraft structure, systems, controls, engines and components. Work independently in a central aviation maintenance facility or work unsupervised off site at outlying field locations; perform depot level and field maintenance to aircraft, engines, propellers, rotors, components and systems in accordance with approved procedures; have a thorough working knowledge of all fleet aircraft, engines, and airframe systems; and ability to inspect and determine problems and correct deficiencies, inspect aircraft and systems for continued airworthiness, and return aircraft to service after major and minor maintenance and repair. Salary and Other Compensation: The hourly rate for this position is $56.76 per hour. Factors which may affect starting pay within this range may include [geography/market, skills, education, experience and other qualifications of the successful candidate. Benefits: The Company offers the following benefits for this position, subject to applicable eligibility requirements: medical insurance, dental insurance, vision insurance, 401(k) retirement plan, life insurance, long-term disability insurance, short-term disability insurance, Vacation accrued bi-weekly (80 hours) for 1-4.99 years of Company service (increases every 5 years), Personal Leave - accumulates at four (4) hours per pay period to a maximum of thirteen (13) days per calendar year, 10 Recognized Holidays. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Definition: This is the journey and second working level for certificated Airframe & Powerplant technicians. Incumbents at this level work independently and inspect and repair aircraft, engines, components and systems and assess for damage, condition and method of repair, and work off site at outlying field locations, which may include assignment as a base mechanic. This position may be assigned other duties and tasks in the program as directed. Minimum Qualifications: Possession of the following certificates: FAA Airframe & Powerplant Technician's Certificates and a valid Class-C Driver's License and three years of aerospace industry work experience as a certificated A&P Technician and two years' experience working on type specific aircraft. Military experience may qualify if the level of work and responsibility was equal to that of a certificated A&P Technician. Prior OEM or other outside training and experience on C- 130 variant aircraft may satisfy the one-year of CAL FIRE specific aircraft requirement. Current CAL FIRE Aviation Program Aircraft Maintenance Technician II who obtain one year of experience and current CAL FIRE Aviation Program Aircraft Maintenance Technician I who obtain two years of experience working on C-130 aircraft and successfully complete Original Equipment Manufacturer or other certified outside vendor for line and intermediate level training specific to the aircraft may be eligible for promotion to this position. Knowledge and Abilities: FAA federal aviation regulations pertaining to the maintenance and repair of aircraft; FAA-approved maintenance practices, techniques, and procedures; aircraft shop maintenance operational procedures and fleet aircraft structure, systems, controls, engines and components. May perform Confined Space Entry maintenance to include aircraft fuel tank repairs. May be required to become engine/taxi-run qualified and demonstrate proficiency in their respective program(s) aircraft ground operations. Work independently in a central aviation maintenance facility or work unsupervised off site at outlying field locations; perform depot level and field maintenance to aircraft, engines, propellers, rotors, components and systems in accordance with approved procedures; have a thorough working knowledge of all fleet aircraft, engines, and airframe systems; and ability to inspect and determine problems and correct deficiencies, inspect aircraft and systems for continued airworthiness, and return aircraft to service after major and minor maintenance and repair. Compensation & Benefits HIRING HOURLY RANGE: $49.72 - 56.76 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant internal equity, and alignment with market data.) This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: please visit our careers site: ********************** Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.