Aircraft mechanic jobs in Chattanooga, TN

Under limited supervision, the mechanic performs work of moderate difficulty in the repair and maintenance of vehicles and equipment. The mechanic is responsible for the assembly and mechanical function of machines. The mechanic will inspect machines, engines, transmission, etc. and run diagnostic tests to discover functionality issues. The mechanic will be responsible for ensuring the functionality and reliability of machines, engines, and mechanical systems. PRIMARY DUTIES AND RESPONSIBILITIES: This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. Inspect machines, engines, transmissions, etc. and run diagnostic tests to discover functionality issues. Conduct repairs aiming for maximum reliability. Troubleshoot reported problems and resolve them in a timely manner. Perform thorough maintenance on machinery, equipment, and systems. Clean and apply lubricants to machinery components. Replenish fluids and components of engines and machinery. Provide consultation on correct maintenance and preventative measures to machines or vehicle users. Observe equipment in operation to detect potential problems. Inspect mechanical equipment to locate damage, defects, or wear. Undertake other duties as assigned (e.g. repair of hydraulic systems, painting, etc.) KNOWLEDGE, SKILLS, AND ABILITIES: Aptitude in using various hand tools. Excellent knowledge of machinery and hydraulic, electrical and other systems and their components. Ability to follow established procedures and practices and read instructions, blueprints, etc. Effective communication Problem-solving ability COMPETENCIES Safety and Health Technical Capacity Problem Solving Analysis Decision Making Initiative MINIMUM REQUIREMENTS: 18 years or older Education: High School Diploma, GED and/or equivalent work experience. Minimum of one year of mechanic experience preferred. Valid certification (e.g. ASE) is preferred. Familiarity with Fleet Maintenance Pro preferred. MACHINES, TOOLS, EQUIPMENT, AND SOFTWARE USED: MS Office and standard office software including Word, Excel, Explorer/Google Chrome and Outlook Company system applications (scheduling software, Fleet Maintenance Pro, etc.) Calipers, drill press, lockout devices, manlift, etc. WORK ENVIRONMENT: May work indoors or outdoors, but more commonly work indoors. Regularly wear protective gear, such as goggles or earplugs. Are exposed to contaminants, such as antifreeze and chemical degreasers, daily. Are exposed to sounds and noise levels that are distracting. May be exposed to inadequate lighting conditions. May sometimes work in cold or hot temperatures, depending on the work locale. TYPICAL PHYSICAL DEMANDS: Ability to work in confined spaces such as enclosed vehicles, such as trucks, cars, and vans. Lifting and carrying of items weighing up to 50 lbs. Lifting 25 lbs. overhead ten to fifteen times per twelve-hour shift. Up to 50 lbs. overhead five to ten times per twelve-hour shift. Ability to climb ladders Exposure to extreme climate

Job Status/Type: Full time Level II Shift/ Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs. Performs inspections, maintenance, troubleshooting, repair, and annual rehabilitation of a variety of different amusement rides and attractions, depending on level of employee. Areas of responsibility include (but are not limited to) maintenance of gearboxes, chains, sprockets, hydraulic systems, pneumatic systems, wire rope, hoists, brakes, pumps, and large bearings. Climbing and working safely at height is an essential part of this job. Benefits: 3 weeks paid vacation (6 sick days, 8 paid holidays) Several medical coverage options to fit your needs best 401K match Maintenance-specific scholarships available FREE entry to ALL our parks and water parks! Perks: Yearly maintenance appreciation week celebration Complimentary tickets for friends and family Discounts on food and park merchandise Full-time and part-time employee events and gatherings Responsibilities: Job responsibilities include but are not limited to: Performs daily, weekly, monthly, annual, and other required inspections of amusement rides and related equipment as assigned, taking corrective actions as issues are identified. Inspections are visual as well as auditory. Trouble shoots a variety of mechanical, pneumatic, hydraulic, and electrical systems and takes appropriate corrective actions. Properly follows all repair procedures and maintains accurate documentation of all repairs. Maintains orderly and accurate records of all required inspections and work performed and submits required paperwork to supervision in a timely manner. Communicates the status of assigned rides both verbally and in written format. Maintains all assigned equipment in a safe and ready condition according to all applicable codes, laws, rules, company policies, and best practices. Reads, understands, and applies information from manufacturer's manuals for service, repair and or component replacement. Accurately reads blueprints (mechanical, pneumatic, and hydraulic). Completes proper documentation as required. Interacts with and communicates with various groups and individuals, such as the immediate supervisor, other Park managers and staff, co-workers, guests, vendors, contractors, inspectors, etc. Provides guest service according to Six Flags standards when serving the guest, including initiating guest interactions, answering questions, and giving directions. Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Six Flags safety guidelines and requirements and reports all unsafe or unusual conditions to supervisor. Meets scheduling availability requirements, including nights, weekends and holiday periods to meet business needs. Meets Six Flag's attendance requirements as outlined in Six Flag's attendance policies. Adheres to Six Flag's code of conduct including costuming and grooming standards as outlined in employees' Guidelines and other park/division specific policies and procedures. Performs other duties as assigned. Qualifications: Knowledge, Skills & Abilities: Strong knowledge of control processors, components, and communication networks used in real-time industrial applications. Strong proficiency in developing and reading one-line diagrams, and technical documents. Proficient at maintaining various rides and attractions. Good judgment, decision making and problem-solving skills. Effective verbal and written communication skills. Education: High school diploma or equivalent. License or Certification: Must meet location-specific requirements to work on specific rides and attractions. State or provincial certifications and/or licensing within if applicable in state. Valid driver's license. Welding certification preferred. Experience: Typically requires 4-6 years mechanical maintenance experience, including at least 2 years working on rides. Equivalency: Directly related experience or a combination of directly related education and experience and/or competencies may be considered in place of the above requirements.

*Structural Mechanic V - Special Missions in GAC Savannah* *Unique Skills:* Must have strong blueprint interpretation skills Must have corridor experience CMP experience preferred Must be able to work any shift *Education and Experience Requirements* High School Diploma or GED required. 8 years aviation sheet-metal and/or fabrication experience to include at least 1 year of aerospace heavy structures modification such as Special Missions. Valid Driver's License required. The Special Missions Structural Mech V is a technical expert that works with a high degree of accuracy and timeliness under minimal supervision to safely fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train others. *Job Description* Principle Duties and Responsibilities:Essential Functions: * Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications . * Mentor and train as required. Review their work prior to sign off to ensure work complies with quality control standards . * Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents . * Utilizing tools as required. to shape and form complex angles and configurations according to blueprint specifications or written/verbal information . * Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheetmetal functions. Use the proper hardware for various sheetmetal applications . * Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP) . * Conduct monthly 5S audits, as required. * Use the material tracking system to create parts demand, track squawks and to sign-off work . * Assist in developing initiatives to meet individual OGSM requirements, as required. * Assist management, as required. with supervision and instruction of technicians in proper procedures and techniques . Perform other duties as assigned.Other Requirements: * FAA A&P license or be able to obtain a repairman certificate within 30 days of start date. * Advanced knowledge of sheetmetal and fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling). * Ability to read and interpret blueprints and engineering documentation. * Valid drivers license required. to operate towing and other Gulfstream transportation equipment. * Demonstrates excellent communication skills, both verbal and written. * Adapts to sudden schedule changes. * Able to use tools and equipment associated with sheetmetal work. * Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. * Must have a good working knowledge of computers and experience working with MicroSoft Office suite. * Must be able to read, write, speak, and understand the English language. *Additional Information* Requisition Number: 229715 Category: Operations Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 02/24/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. [Legal Information]( | [Site Utilities]( | [Contacts]( | [Sitemap]( Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. [A General Dynamics Company]( Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic II (Avionics/Electrician) th MXG) Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. ADDITIONAL QUALIFICATIONS/EXPERIENCE REQUIREMENTS: Aircraft Mechanic II (Avionics/Electrician): Electrical Experience: Minimum of four years total experience in aircraft maintenance as an aircraft avionics/electrician with one year on F-15 aircraft. The Contractor shall have the skill to remove and replace aircraft parts and accessories/components and the skill to make adjustments and settings according to established specifications. The Contractor shall also have the skill to identify and isolate integrated systems malfunctions and analyze performance and operate integrated avionics systems to determine operational condition per operational checks. Experience using specialized tools required for military aviation electrical connector assembly/disassembly and other associated electrical terminating devices is required. Aircraft modification and operational checks experience required. Experience in electrical harness fabrication and braiding. Electrical Knowledge: The Contractor shall have the ability to follow and accomplish tasks in accordance with existing published technical data. The Contractor shall have the ability to read and interpret engineering drawings and specifications required to accomplish maintenance tasks and modifications. Knowledge is mandatory of electrical, electronic, microelectronic, mechanical and indicator principles theory, and application relating to electrical systems; concepts and application of maintenance directives; meaning of symbols used in wiring diagrams, blueprints, and schematics; using and interpreting testing and measuring devices; and proper handling, use, and disposal of hazardous waste and materials. Other: Normal color vision as defined in AFI 48-123, Medical Examinations and Standards is mandatory for this specialty. Education: High school diploma, or equivalent, with successful completion of related military or commercial courses. Courses in basic electronics, mathematics, general science, physics, and mechanics are desirable. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: May occasionally perform duties as Team Lead Scheduled and unscheduled maintenance Maintenance Control planning and management Aircraft maintenance action documentation via logs, records, forms, and electronic means Support Equipment (SE) operation and inspections Aircraft inspections Troubleshooting General aircraft maintenance Technical Directive compliance and modifications Tool Control Program Tool issue/receipt supporting aircraft maintenance shops including hazardous materials, tool room/box/pouch configuration Maintain Aircraft, Engines, and SE Logbooks Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Requisition repair parts, materials, and consumable supplies through military supply system. Perform other tasks as directed. Preferred Qualifications: Eight or more years' experience in aircraft maintenance Three years' experience on F-15 aircraft Advanced Corrosion Control Course Basic Qualifications: Four years Aviation Maintenance experience One year experience on F-15 aircraft High school diploma, or equivalent, with successful completion of related military or commercial courses Must be able to work shift schedules as required per Performance Work Statement (PWS) Must be able work work-week schedules i.e. M-F, Sn-Th or as required per PWS Basic Corrosion Control Course. Must be able to work flexible work-week schedules as required Must be able to pass a background check Must have at a minimum an interim SECRET security clearance Must be eligible for Common Access Card (CAC) Must be eligible for Restricted Area Badge Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must be able to travel to support off station Temporary Duty (TDY) as required Compensation $37.73/hour Other Compensation Employees will receive a health and welfare fringe benefit of $2.65 for every hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees have a minimum of eleven paid holidays. After completing one year of service, employees will have two weeks paid vacation. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

The Flight Line Aircraft Mechanic troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, and auxiliary power unit for CH-53E aircraft. This mechanic may supervise the jacking and towing of aircraft, makes adjustments and settings such as cable tension and seat movement settings and adjustments; obtains standard parts such as fuel and oil line connections and fittings, cable linkage, and harnesses by referring to parts manuals and by making comparisons with samples, may perform pre-flight, thru-flight, and post-flight maintenance inspections, enter in the maintenance records description of the work performed, and services engines and aircraft components at line station making repairs, short of overhaul required to keep aircraft in safe operating condition. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment. The CH-53E Worker is responsible for inspecting and maintaining rotor airframes and airframe components and performs duties relating to flight line operation. Replaces or repairs worn or damaged components, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removes engine from aircraft, disassembles and inspects parts for wear, cracks, security, or other defects, and repairs or replaces defective engine parts and reassembles and installs engine in aircraft. Uses standard aircraft handling and taxi procedures in accordance with (IAW) Naval Aviation Training and Operating Procedures Standardization (NATOPS), specific aircraft manuals, and local regulations, to support the host squadron. Launches aircraft IAW published flight schedules or as needed to support emergencies. Performs Recovery (pre-positioning support equipment and aircraft directing), including hot brake checks, post flight servicing, static grounding (aircraft to ground) and chocks. Performs acceptance, conditional, daily, phase, pre D-Level, post D-Level, special, transfer, turnaround and zonal aircraft inspections and preoperational and periodic inspections on SE IAW Maintenance Requirements Cards (MRC) and NAVAIR technical manuals. Pre/Post-Op checks, fueling and operation of SE, tools, Individual Material Readiness List (IMRL) and Naval Aviation Metrology and Calibration (METCAL) assigned to the Power Line work center, to include conditional/scheduled inspections and periodic maintenance. Performs all duties in accordance with the Naval Aviation Maintenance Program (NAMP) and Commander Naval Air Forces Instruction 4790.2B. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, conduct maintenance inspections, and perform miscellaneous duties to service aircraft. This incumbent assists with the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, required to keep aircraft in safe operating condition. Requirements Performs aircraft maintenance to include inspection, operational test, repair, and modification of aircraft electrical/avionics systems Demonstrates in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment. Must be familiar with operational capabilities and limitations of electrical/avionics systems Performs the troubleshooting and rewiring of complex avionics/electrical systems and subsystems discrepancies and modifications Uses blueprints, schematics, technical drawings and manufacturers' drawings and sketches in the performance of assigned duties May be required to perform Maintenance Operational Checks (MOCs) Completes maintenance documentation accurately using OOMA, and required forms, as required by job assignment. Must show proficiency in the use of OOMA within 90 days after assignment High school diploma or equivalent-General Educational Development (GED) certificate. (2) years' experience on Military aircraft is required. FAA Airframe & Power plants (A&P) certification and relevant civilian aircraft experience may be substituted. Must be able to meet any Government/Company licensing/qualification requirements for the position

Our 2nd shift schedule is Monday-Thursday, 3pm-1am. The shift incentive includes a 10% -15% premium, paid lunch, 3 day weekends, formal airframe training and eligibility to transfer to 1st shift after 3 years. West Star is the fastest growing maintenance repair organization in the industry and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. When you join our team we don't think you should have to wait for your benefits to kick in. That's why when you start, they start with you! This includes medical, dental, 401K match, time off accruals, weekly pay days and much more. We don't want you to live to work, we want you to work and live. What you can expect as a Lead Aircraft Maintenance Technician at West Star: As a Lead your main focus will be centered on leading a team of technicians to produce timely results that are of the highest quality and accuracy. The most successful individuals will be highly analytical, inquiring and have a critical mind. This job requires imagination and strong problem solving skills, with a strong technical orientation. Getting the job done and getting it done right are the two, equal, drivers for this job. Effectively utilizing manpower and directing project flow will be your primary function. You will be ESSENTIAL to many FUNCTIONS including: * Lead the team to complete the necessary jobs/tasks. This includes using good judgement in handling day-to-day tasks, and knowing when to involve your manager * Implement a strong turnover of work to the next shift * Look for opportunities (within your area of responsibility) to reduce turn time of aircraft * Help to train/mentor those technicians assigned to your projects * Supervise team members in daily work load. * Work independently on projects and lead multiple projects as assigned. Schedule and work quality are essential in these functions, as is showing excellent drive and initiative. * Perform general mechanical functions on aircraft and related systems. This shall include, but not be limited to items such as removal and installation of panels and components, repair work and sheet metal repair or installation. * Troubleshooting and evaluation of systems on the aircraft when designated. * Inspection and evaluation of the aircraft and components when designated. * Aircraft movement, performance runs and taxiing when required. * Maintenance and repair of shop facility, equipment and tooling to support operations. * Work with customer in project management, pricing and customer support roles. * Effectively and clearly communicate (i.e., speak, write, read) in English * Any other job-related duties as assigned by supervisor or management. What you'll need to bring with you: Your Education A High school diploma or equivalent and Airframe and Powerplant License are required. A valid driver's license approved for airline travel and/or a valid passport is ideal, but not mandatory. Aircraft specific factory training is preferred. Your Experience 3-5 years prior experience aircraft maintenance to include involvement in supervision of four or more team members. An advanced knowledge of FAA paperwork, work orders and use of Corridor systems. Your Initiative: We're looking for a team player who is self-motivated and able to perform in a fast paced environment where working under specific deadlines and time constraints will be common. Your Sense of Responsibility: Attend work every day as scheduled to include overtime and weekend assignments. Notify supervisor in advance of shift starting if unable to work. Must have reliable transportation to get to work each and every day. Must perform all work in accordance with Federal Aviation Administration guidelines. Follow all company and safety rules during performance of duties. Maintain customer oriented work habits. Direct the work and flow of multiple projects. Supervision of team members in daily operations and duties. Completion of work orders, FAA paperwork. Other Particulars: Physical Requirements Lift at least 50 lbs. Routine walking, bending and squatting or sitting. Routing or repetitive physical motion with arms and hands. Basic personal computer operations. Mental Requirements Understanding and implementation of regulations and guidelines. Troubleshoot or evaluate system operation. Work with others in a professional manner. Coordinate projects. Team management skills. Supervision Will directly supervise multiple technicians. Will work under supervision of assigned Team Leader and Operations Manager. Work with other Team Leaders on multiple projects in a cooperative manner. Working Conditions The majority of work will be accomplished in a hangar environment which can include very hot or very cold temperatures Work outside during aircraft runs will occur. Varied positions in and around the aircraft. Equipment Used Personal hand tools supplied by the mechanic. Pneumatic, hydraulic and electrical equipment. Jacks, stands, lifts and other support devices. Tugs, power carts and other engine powered equipment. Personal computer and work order prints.

We are always looking forward to receiving resumes from candidates with skills and technical experience in the aerospace sector. We are very happy to receive speculative resumes if you are looking for a career change within the aerospace industry. Our flexible recruitment services will provide you with the following employment options: * Contract * Contract to Direct * Direct Our experienced consultants are experts in their field and are well placed to advise you on all aspects of aerospace recruitment opportunities, and employment trends.

Job Status/Type: Full time Level II Shift/ Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs. Performs inspections, maintenance, troubleshooting, repair, and annual rehabilitation of a variety of different amusement rides and attractions, depending on level of employee. Areas of responsibility include (but are not limited to) maintenance of gearboxes, chains, sprockets, hydraulic systems, pneumatic systems, wire rope, hoists, brakes, pumps, and large bearings. Climbing and working safely at height is an essential part of this job. Benefits: 3 weeks paid vacation (6 sick days, 8 paid holidays) Several medical coverage options to fit your needs best 401K match Maintenance-specific scholarships available FREE entry to ALL our parks and water parks! Perks: Yearly maintenance appreciation week celebration Complimentary tickets for friends and family Discounts on food and park merchandise Full-time and part-time employee events and gatherings Responsibilities: Job responsibilities include but are not limited to: Performs daily, weekly, monthly, annual, and other required inspections of amusement rides and related equipment as assigned, taking corrective actions as issues are identified. Inspections are visual as well as auditory. Trouble shoots a variety of mechanical, pneumatic, hydraulic, and electrical systems and takes appropriate corrective actions. Properly follows all repair procedures and maintains accurate documentation of all repairs. Maintains orderly and accurate records of all required inspections and work performed and submits required paperwork to supervision in a timely manner. Communicates the status of assigned rides both verbally and in written format. Maintains all assigned equipment in a safe and ready condition according to all applicable codes, laws, rules, company policies, and best practices. Reads, understands, and applies information from manufacturer's manuals for service, repair and or component replacement. Accurately reads blueprints (mechanical, pneumatic, and hydraulic). Completes proper documentation as required. Interacts with and communicates with various groups and individuals, such as the immediate supervisor, other Park managers and staff, co-workers, guests, vendors, contractors, inspectors, etc. Provides guest service according to Six Flags standards when serving the guest, including initiating guest interactions, answering questions, and giving directions. Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Six Flags safety guidelines and requirements and reports all unsafe or unusual conditions to supervisor. Meets scheduling availability requirements, including nights, weekends and holiday periods to meet business needs. Meets Six Flag's attendance requirements as outlined in Six Flag's attendance policies. Adheres to Six Flag's code of conduct including costuming and grooming standards as outlined in employees' Guidelines and other park/division specific policies and procedures. Performs other duties as assigned. Qualifications: Knowledge, Skills & Abilities: Strong knowledge of control processors, components, and communication networks used in real-time industrial applications. Strong proficiency in developing and reading one-line diagrams, and technical documents. Proficient at maintaining various rides and attractions. Good judgment, decision making and problem-solving skills. Effective verbal and written communication skills. Education: High school diploma or equivalent. License or Certification: Must meet location-specific requirements to work on specific rides and attractions. State or provincial certifications and/or licensing within if applicable in state. Valid driver's license. Welding certification preferred. Experience: Typically requires 4-6 years mechanical maintenance experience, including at least 2 years working on rides. Equivalency: Directly related experience or a combination of directly related education and experience and/or competencies may be considered in place of the above requirements.

*Structural Mechanic III in GAC Savannah* *Unique Skills:* N/A *Education and Experience Requirements* High School Diploma or GED required. 4 years related structural assembly experience. Experience working with Solumina and Smarteam preferred.. Q-stamp preferred. In a team oriented work environment, under little to no supervision, Structural Mech III perform a variety of structural assembly operations using required. tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. May assist and instruct other team members. *Job Description* Principle Duties and Responsibilities:Essential Functions: * Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft . * Possess the proven ability to move to new tasks with only a moderate, short-term impact to established goal hours and schedule . * Rivet structural members, assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Ability to remove fasteners without damaging structures . * Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents . * Check all work and ensure a defective free assembly prior to final inspection . * Instruct and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems . * Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . * Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information . * Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . * Maintain a neat and orderly work area, supports the company 5S & Lean Initiative Program and complies with all safety regulations. Use of personal protective equipment as required. Additional Functions: * Participate in continuous improvement activities . * Properly use and maintain company-provided tools and equipment and returns items to tool room after use . * Ensure standard operating procedures are followed when operating ground support equipment . * Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags . * Ensure accurate daily job charging to the aircraft . * Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership . Perform other duties as assigned.Other Requirements: * Basic computer and basic shop math skills. * Read and comprehend basic documents and instructions and read a scale. * Must have essential personal skills and possess aptitude for hands-on craftswork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. * Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. * Ability to work with composite resins and materials. * Must be able to work any shift. * Must be able to climb ladders, stands, stairs, and work in small spaces or restricted areas & lift 50 lbs. This job requires one to be able to read, write, speak, and understand the English language. *Additional Information* Requisition Number: 229596 Category: Operations Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 02/17/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. [Legal Information]( | [Site Utilities]( | [Contacts]( | [Sitemap]( Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. [A General Dynamics Company]( Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

PENDING CONTRACT AWARD TASK DESCRIPTION: Aircraft Mechanic III (23023): Leads a team in the performance of aircraft maintenance, inspections, and scheduled / unscheduled maintenance. Processes the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. Capable of performing, supervising and inspecting the duties of Mechanic Is, IIs and IIIs. A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Avionics/Electrical Systems and related Sub-Systems, and Aircraft Logs and Records Administration Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. Quality Assurance Representative shall have experience writing with clarity and technical accuracy, and exhibit leadership and ensure adherence to all applicable policies and procedures. Possess a high degree of expertise in the control and coordination of aircraft maintenance. Thorough working knowledge of applicable maintenance/technical manuals and publications. Thorough working knowledge of aircraft maintenance records. Working understanding of the aircraft and aircraft systems. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Performs quality technical inspection of aircraft, aircraft components, parts, repairs, and systems (including avionics, electrical, instrument and armament) as required by functional assignment Performs quality and safety inspections of on-site equipment and tools used in aircraft maintenance, vehicles, and equipment Performs initial, in-progress and final quality technical inspections during maintenance, repair, modification, rework, and overhaul of aircraft, aircraft components, and component parts Provides technical guidance, instructions, and interpretation of written instructions and procedures to mechanics as required to assure acceptable quality work and flight line services. Assists in preparation, processing, and answering of Product Quality Deficiency Reports (PQDRs). Monitor compliance, conduct audits and provide guidance in Environmental Health and Safety (EH&S) Programs, (FOD/Confined Space/Lockout-Tag out/Fall Protection). Scheduled and unscheduled maintenance support for assigned CH-53 aircraft Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, corrosion control, preservation/de-preservation Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in in the activities plan and daily flight schedule Aircraft maintenance action documentation via logs, records, forms, and electronic means Troubleshoot malfunctions in aircraft structure, landing gear, pneumatic, hydraulic, ventilation and heating, flight surfaces and controls, dynamic components, and powerplant systems. Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO). Inspect, repair, replace, and rebuild aircraft components/sub components to include rigging of flight control. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. General aircraft maintenance Technical Directive compliance and modifications Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Perform phase, scheduled, unscheduled, periodic, and other hourly or calendar inspections. Requisition repair parts, materials, and consumable supplies through military supply system. Perform other tasks as directed. Preferred Qualifications: Seven or more years' CH-53 rotary wing experience Ten or more years' rotary wing maintenance experience Naval Aviation Maintenance Control Management for Optimized Organization Maintenance Activity course (C-555-0053) or if previously completed, both the Naval Aviation Maintenance Control Management course (Course D/E-555-0040) and the Naval Aviation Officer and Senior Supervisor NALCOMIS OOMA Familiarization course (Course D/E-555-0054). Seven or more years' experience with NALCOMIS/OOMA Basic Corrosion Control Course Advanced Corrosion Control Course/Paint and Final Finish Basic Qualifications: Must be able to read and interpret complex engineering drawings, technical manuals, and use measuring instruments, gauges, tools, and test equipment. Must show proficiency in the use of OOMA within 90 days after assignment. 4 years' experience as a Quality Assurance Representative (QAR) on CH/MH-53E. Must have completed the Naval Aviation Logistics Command Management Information System (NALCOMIS) (Optimized) Organizational Level Maintenance Activity (OMA) Naval Aviation Quality Assurance Administration Course (Course C-555-0046). High school diploma or equivalent General Educational Development (GED) certificate Must be able to work shift schedules as required per Performance Work Statement (PWS) Must be able work work-week schedules i.e. M-F, Sn-Th or as required per PWS Must be able to pass a background check Must be able to obtain favorable National Agency Check with Written Inquires (NACI), IAW DTM-08-003 Next Generation Common Access Card (CAC) Implementation Guidance Must be able to climb ladders, raised platforms, and aircraft Must be able to use hand and power tools Must have dexterity to handle small parts Must be able to deploy to support off station exercises and perform other support duties if required Employment is contingent on a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

The Avionics Aircraft Mechanic III may supervise lower skilled mechanics and assist with troubleshooting malfunctions in flight surfaces and controls, anti-icing, pneudraulic, engines, and auxiliary power unit for CH-53E aircraft. This worker reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Aircraft communications/navigation/electrical systems technicians, CH-53E, install, remove, inspect, test, maintain, and repair systems, components, and ancillary equipment of installed Aircraft Communications/Navigation/Electrical Systems to include Deceptive Electronic Countermeasures (DECM) Systems at the Organizational Maintenance Activity (OMA) level. Must possess a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, and micrometers. Requires working knowledge of technical publications. Receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. Removes, repairs, modifies, tests, troubleshoots, calibrates, and installs electrical systems, equipment and accessories used in aircraft; makes functional checks on electrical systems to ensure performance and reliability and correct malfunctions disclosed by static, ground, and flight tests; and replaces defective wiring and installs new wiring for aircraft changes, modifications and repairs. Overhauls, repairs, modifies and tests aircraft electrical system accessories such as motors, dynamotors, inverters, voltage regulators, relays, cutouts, engine synchronizers, electric motor driven air compressors and activators, DC generators, AC alternators, DC/AC electrical controls, cockpit air conditioning controls, engine temperature controls, and transistorized control equipment, etc. Installs, troubleshoots, calibrates, and tests complex electrical systems and devices on military aircraft to ensure precise performance and reliability of all electrical systems. Sets up test positions using test equipment such as oscilloscopes, audio signal generators, frequency meters, voltmeters, watt meters and ammeters. Tests the various units for compliance with the proper tolerances prescribed for transient time, noise amplitude, and frequencies; adjusts resonant circuits, computes alternative current loads; and makes all necessary adjustments to bring the units up to prescribed operational standards. Performs all duties in accordance with the Naval Aviation Maintenance Program (NAMP) and Commander Naval Air Forces Instruction 4790.2B. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, conducts maintenance inspections, and performs miscellaneous duties to service aircraft. Assists with the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, required to keep aircraft in safe operating condition. Performs duties of a Collateral Duty Quality Assurance Representative (CDQAR) and ensures all maintenance is performed and inspected in accordance with the NAMP and is accountable to the quality assurance officer and aircraft maintenance officer within the Maintenance Department. Requirements Performs aircraft maintenance to include inspection, operational test, repair, and modification of aircraft electrical/avionics systems. Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance and instruction to other employees as needed. Possess a high degree of expertise of aircraft electrical/avionics systems Demonstrates in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment Must be familiar with operational capabilities and limitations of electrical/avionics systems Possess a thorough working knowledge of the detection, prevention and treatment of corrosion Performs the troubleshooting and rewiring of complex avionics/electrical systems and subsystems discrepancies and modifications Provides technical assistance, guidance and instruction as Estimates and accesses damage of avionics/electrical components/systems as related to crash and mishap damaged aircraft to include repair and/or replacement, man-hours, parts, components, and materials When assigned to the flight line, provide customer support during launch and recovery and aircraft security as required. Completes maintenance documentation accurately using OOMA, and required forms, as required by job assignment. Six (6) years' expereince on Military aircraft is required. AFF Airframe & Powerplants (A&P) certification and relevant civilian aircraft experience may be substituted. Must show proficiency in the use of OOMA within 90 days after assignment High school diploma or equivalent General Educational Development (GED) certificate.

West Star is the fastest growing maintenance repair organization in the industry and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. When you join our team we don't think you should have to wait for your benefits to kick in. That's why when you start, they start with you! This includes medical, dental, 401K match, time off accruals, weekly pay days and much more. We don't want you to live to work, we want you to work and live. What you can expect as a Lead Aircraft Maintenance Technician at West Star: As a Lead your main focus will be centered on leading a team of technicians to produce timely results that are of the highest quality and accuracy. The most successful individuals will be highly analytical, inquiring and have a critical mind. This job requires imagination and strong problem solving skills, with a strong technical orientation. Getting the job done and getting it done right are the two, equal, drivers for this job. Effectively utilizing manpower and directing project flow will be your primary function. You will be ESSENTIAL to many FUNCTIONS including: * Lead the team to complete the necessary jobs/tasks. This includes using good judgement in handling day-to-day tasks, and knowing when to involve your manager * Implement a strong turnover of work to the next shift * Look for opportunities (within your area of responsibility) to reduce turn time of aircraft * Help to train/mentor those technicians assigned to your projects * Supervise team members in daily work load. * Work independently on projects and lead multiple projects as assigned. Schedule and work quality are essential in these functions, as is showing excellent drive and initiative. * Perform general mechanical functions on aircraft and related systems. This shall include, but not be limited to items such as removal and installation of panels and components, repair work and sheet metal repair or installation. * Troubleshooting and evaluation of systems on the aircraft when designated. * Inspection and evaluation of the aircraft and components when designated. * Aircraft movement, performance runs and taxiing when required. * Maintenance and repair of shop facility, equipment and tooling to support operations. * Work with customer in project management, pricing and customer support roles. * Effectively and clearly communicate (i.e., speak, write, read) in English * Any other job-related duties as assigned by supervisor or management. What you'll need to bring with you: Your Education A High school diploma or equivalent and Airframe and Powerplant License are required. A valid driver's license approved for airline travel and/or a valid passport is ideal, but not mandatory. Aircraft specific factory training is preferred. Your Experience 3-5 years prior experience aircraft maintenance to include involvement in supervision of four or more team members. An advanced knowledge of FAA paperwork, work orders and use of Corridor systems. Your Initiative: We're looking for a team player who is self-motivated and able to perform in a fast paced environment where working under specific deadlines and time constraints will be common. Your Sense of Responsibility: Attend work every day as scheduled to include overtime and weekend assignments. Notify supervisor in advance of shift starting if unable to work. Must have reliable transportation to get to work each and every day. Must perform all work in accordance with Federal Aviation Administration guidelines. Follow all company and safety rules during performance of duties. Maintain customer oriented work habits. Direct the work and flow of multiple projects. Supervision of team members in daily operations and duties. Completion of work orders, FAA paperwork. Other Particulars: Physical Requirements Lift at least 50 lbs. Routine walking, bending and squatting or sitting. Routing or repetitive physical motion with arms and hands. Basic personal computer operations. Mental Requirements Understanding and implementation of regulations and guidelines. Troubleshoot or evaluate system operation. Work with others in a professional manner. Coordinate projects. Team management skills. Supervision Will directly supervise multiple technicians. Will work under supervision of assigned Team Leader and Operations Manager. Work with other Team Leaders on multiple projects in a cooperative manner. Working Conditions The majority of work will be accomplished in a hangar environment which can include very hot or very cold temperatures Work outside during aircraft runs will occur. Varied positions in and around the aircraft. Equipment Used Personal hand tools supplied by the mechanic. Pneumatic, hydraulic and electrical equipment. Jacks, stands, lifts and other support devices. Tugs, power carts and other engine powered equipment. Personal computer and work order prints.

Job Status/Type: Full time Level II Shift/ Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs. Performs inspections, maintenance, troubleshooting, repair, and annual rehabilitation of a variety of different amusement rides and attractions, depending on level of employee. Areas of responsibility include (but are not limited to) maintenance of gearboxes, chains, sprockets, hydraulic systems, pneumatic systems, wire rope, hoists, brakes, pumps, and large bearings. Climbing and working safely at height is an essential part of this job. Benefits: 3 weeks paid vacation (6 sick days, 8 paid holidays) Several medical coverage options to fit your needs best 401K match Maintenance-specific scholarships available FREE entry to ALL our parks and water parks! Perks: Yearly maintenance appreciation week celebration Complimentary tickets for friends and family Discounts on food and park merchandise Full-time and part-time employee events and gatherings Responsibilities: Job responsibilities include but are not limited to: Performs daily, weekly, monthly, annual, and other required inspections of amusement rides and related equipment as assigned, taking corrective actions as issues are identified. Inspections are visual as well as auditory. Trouble shoots a variety of mechanical, pneumatic, hydraulic, and electrical systems and takes appropriate corrective actions. Properly follows all repair procedures and maintains accurate documentation of all repairs. Maintains orderly and accurate records of all required inspections and work performed and submits required paperwork to supervision in a timely manner. Communicates the status of assigned rides both verbally and in written format. Maintains all assigned equipment in a safe and ready condition according to all applicable codes, laws, rules, company policies, and best practices. Reads, understands, and applies information from manufacturer's manuals for service, repair and or component replacement. Accurately reads blueprints (mechanical, pneumatic, and hydraulic). Completes proper documentation as required. Interacts with and communicates with various groups and individuals, such as the immediate supervisor, other Park managers and staff, co-workers, guests, vendors, contractors, inspectors, etc. Provides guest service according to Six Flags standards when serving the guest, including initiating guest interactions, answering questions, and giving directions. Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Six Flags safety guidelines and requirements and reports all unsafe or unusual conditions to supervisor. Meets scheduling availability requirements, including nights, weekends and holiday periods to meet business needs. Meets Six Flag's attendance requirements as outlined in Six Flag's attendance policies. Adheres to Six Flag's code of conduct including costuming and grooming standards as outlined in employees' Guidelines and other park/division specific policies and procedures. Performs other duties as assigned. Qualifications: Knowledge, Skills & Abilities: Strong knowledge of control processors, components, and communication networks used in real-time industrial applications. Strong proficiency in developing and reading one-line diagrams, and technical documents. Proficient at maintaining various rides and attractions. Good judgment, decision making and problem-solving skills. Effective verbal and written communication skills. Education: High school diploma or equivalent. License or Certification: Must meet location-specific requirements to work on specific rides and attractions. State or provincial certifications and/or licensing within if applicable in state. Valid driver's license. Welding certification preferred. Experience: Typically requires 4-6 years mechanical maintenance experience, including at least 2 years working on rides. Equivalency: Directly related experience or a combination of directly related education and experience and/or competencies may be considered in place of the above requirements.

*Structural Mechanic IV in GAC Savannah* *Unique Skills:* * *Education and Experience Requirements* High School Diploma or GED required. 6 years related structural assembly experience. Experience working with Solumnia and Smarteam preferred.. Q-stamp preferred. In a team oriented work environment, independently performs a variety of structural assembly operations using required. tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. Assists and instructs other team members. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. *Job Description* Principle Duties and Responsibilities:Essential Functions: * Use ability as a skilled specialist to contribute to the development of employees and techniques and completes work in innovative and effective ways . * Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements . * Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications . * Ability to move to new tasks with minimal, short-term impact to established goal hours and schedule . * Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structures . * Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size for rivets, hole pattern for rivets, cutand form plastics and follow standard operating procedures when using adhesives, sealants and solvents . * Check all work and ensure a defect free assembly prior to final inspection . * Mentor, train, and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems . * Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . * Align and assembles parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners . * Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . * Plan and organize workloads and resource requirements to meet or exceed goal hours and schedule expectations. Assist in overseeing projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks . * Maintain a neat and orderly work area, supports the company 5S, Lean Initiative Program, and complies with all safety regulations . * Support Lean Activities, comply with all safety, 5S, and housekeeping policies . Perform other duties as assigned.Other Requirements: * Good working knowledge of computers and related software. * Must be able to read and interpret blue prints. * Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Should be able to use all tools required. to do the job. * Must be able to use mathematical formulas by solving dimensional problems using fractions, decimal fractions and whole numbers. * Thorough knowledge in the use of multiple measuring devices, demonstrated ability to use within specified tolerance. * Must be able to work any shift. * Must be able to lift 50 lbs. * Must be able to climb ladders, stands, stairs and work in small spaces and/or restricted areas. * Must be able to read, write, speak, and understand the English language. *Additional Information* Requisition Number: 228904 Category: Operations Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 12/28/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. [Legal Information]( | [Site Utilities]( | [Contacts]( | [Sitemap]( Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. [A General Dynamics Company]( Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft #LI-CV1

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic I TASK DESCRIPTION: Aircraft Mechanic I (23021): Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair. May be required to be licensed by Federal Aviation Administration. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Airframe/Structural, Corrosion, Landing Gear, Wing/Pylon Fold, Hydraulic/Pneumatic, Mechanical Flight Control Systems, Avionics/Electrical Systems and related Sub-Systems, Blade/Pylon Fold, Power Plants and related Sub-Systems, Fuel and Air Systems, Rotor Systems, and related Sub-systems Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Performs aircraft maintenance functions of the Line, Corrosion Control, and Aircraft Organizational Level maintenance Scheduled and unscheduled maintenance support for assigned H-1 aircraft Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, surface finish removal, corrosion control, preservation/de-preservation Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in the activities plan and daily flight schedule Aircraft maintenance action documentation via logs, records, forms, and electronic means Troubleshoot malfunctions in aircraft structure, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO). Inspect, repair, replace, and rebuild aircraft components/sub components to include rigging of flight control. Read and interpret manufacturers' maintenance manuals, military technical manuals, service bulletins, technical data, engineering data, blueprints, manufacturers' drawings, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Flight Line operations/functions at detachment locations as required Confined space operations to include fuel cell entry Support Equipment (SE) operation and inspections Aircraft launch and recovery Aircraft inspections Aircraft movement Support services General aircraft maintenance Technical Directive compliance and modifications Maintain Aircraft, Engines, and SE Logbooks Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Perform phase, scheduled, unscheduled, periodic, and other hourly or calendar inspections. Perform preflight, thru flight, and post-flight maintenance inspections, launch and recover aircraft, and Preventive Maintenance Daily Inspections. Requisition repair parts, materials, and consumable supplies through military supply system. Other tasks as directed Preferred Qualifications: Three or more years' H-1 rotary wing experience Five or more years rotary wing maintenance experience Cadmium Plating qualified Qualified to certify H-1 aircraft Safe-for-Flight Naval Aviation Maintenance Control Management course (C-555-0053) Collateral Duty Quality Assurance Representative (CDQAR) for Airframes, Power Plants and Electrical Systems Collateral Duty Inspector (CDI) for Line, Corrosion Control and Avionics Systems Quality Assurance Safety Observer (QASO) Ammunition & Explosive handling qualifications Vibration Analysis Operator / Interpreter Tire and Wheel Hydraulic Contamination Plane Captain Paint, Final Finish Insignia (N-701-001) and Aircraft Corrosion (N-701-0013) Basic Qualifications: Individual (I) Aircraft Maintenance Qualification Two years aviation maintenance experience Must achieve Collateral Duty Inspector (CDI) AH-1Z & UH-1Y designation for DOL Skill within 90 days of hire Must be able to work 1st, 2nd , 3rd and Weekend shift as required Must be able to work flexible schedule Mon-Fri ,Sun-Thur and Fri-Mon as required Must be able to pass background check Must be able to obtain favorable National Agency Check with Written Inquires (NACI), IAW DTM-08-003 “Next Generation Common Access Card (CAC) Implementation Guidance or Secret security clearance as required for the position Must be able to climb ladders, raised platforms, and aircraft Must be able to use hand and power tools Must have dexterity to handle small parts Must be able to deploy to support off station exercises and perform other support duties if required Compensation $30.43/hour Other Compensation Employees receive a minimum health and welfare benefit of $2.65 per hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees receive 2 weeks' paid vacation after 1 year of service. KAI employees at MALS-26 have 11 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

The Flight Line Aircraft Mechanic II may supervise lower skilled mechanics and assist with troubleshooting malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, and auxiliary power unit for CH-53E aircraft. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment. The CH-53E mechanic is responsible for inspecting and maintaining rotor airframes and airframe components and performs duties relating to flight line operation. This worker reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Replaces or repairs worn or damaged components, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removes engine from aircraft, disassembles and inspects parts for wear, cracks, security, or other defects, and repairs or replaces defective engine parts and reassembles and installs engine in aircraft. Uses standard aircraft handling and taxi procedures in accordance with (IAW) Naval Aviation Training and Operating Procedures Standardization (NATOPS), specific aircraft manuals, and local regulations, to support the host squadron. Launches aircraft IAW published flight schedules or as needed to support emergencies. Performs Recovery (pre-positioning support equipment and aircraft directing), including hot brake checks, post flight servicing, static grounding (aircraft to ground) and chocks. Performs acceptance, conditional, daily, phase, pre D-Level, post D-Level, special, transfer, turnaround and zonal aircraft inspections and preoperational and periodic inspections on SE IAW Maintenance Requirements Cards (MRC) and NAVAIR technical manuals. Pre/Post-Op checks, fueling and operation of SE, tools, Individual Material Readiness List (IMRL) and Naval Aviation Metrology and Calibration (METCAL) assigned to the Power Line work center, to include conditional/scheduled inspections and periodic maintenance. Performs all duties in accordance with the Naval Aviation Maintenance Program (NAMP) and Commander Naval Air Forces Instruction 4790.2B. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, conduct maintenance inspections, and perform miscellaneous duties to service aircraft. This incumbent assists with the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, required to keep aircraft in safe operating condition. Performs duties of a Collateral Duty Inspector (CDI) and ensures all maintenance is performed and inspected in accordance with the NAMP and is accountable to the quality assurance officer and aircraft maintenance officer within the Maintenance Department. Requirements Performs routine aircraft maintenance functions Must demonstrate an operational knowledge of aircraft, aircraft systems, engines and component parts Operates aircraft towing equipment in towing operations. Maintains aircraft hydraulic systems Must have knowledge of the proper use of hand tools in aircraft maintenance Must be able to read and write, and interpret and comply with aircraft maintenance procedures, manuals, specifications, and directives, guides and forms used on the job Performs preventive maintenance inspections on aircraft and aircraft systems and subsystems Performs troubleshooting, repair, modifications, corrosion control and preservation of aircraft and aircraft systems and aircraft sub-systems, including fuel, oil and pneudraulic systems Overhauls aircraft components and sub-components. Performs functional checks, inspections, troubleshooting as required and trained Completes maintenance documentation accurately using OOMA, and required forms, as required by job assignment Must show proficiency in the use of OOMA within 90 days after assignment High school diploma or equivalent--General Educational Development (GED) certificate Must be skill qualified in a primary MOS from any of the following OccFlds: 6113/6173, Aircraft Maintenance, equivalent skill designation from other services or possess valid FAA Airframe and Power plant Certification. Must have four (4) years' minimum experience rotary wing aircraft

Our weekend Shift schedule is Friday-Sunday, 6am-6:30pm. The shift incentive includes a 11.11% shift differential and 3 day workweek. West Star is the fastest growing maintenance repair organization in the industry and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. When you join our team we don't think you should have to wait for your benefits to kick in. That's why when you start, they start with you! This includes medical, dental, 401K match, time off accruals, weekly pay days and much more. We don't want you to live to work, we want you to work and live. What you can expect as an Aircraft Maintenance Technician at West Star: Whether you are replacing or repairing parts, troubleshooting electrical/mechanical/hydraulic and pneumatic systems or performing inspections on some of the most sophisticated civilian aircraft in the world, no day is the same. What is the same, is that each day will bring new experiences and opportunities for growth. You will be ESSENTIAL to many FUNCTIONS including: * Performing general mechanical tasks on aircraft and related systems. * Removal and installation of panels and components, * Troubleshooting and problem solving aircraft system/component issues * De-fueling aircraft, * Engine removal/installations, * Operating ground support equipment, * Inspection and evaluation of the aircraft and components * Aircraft movement and assistance in performance runs/ taxiing * Maintenance and repair of shop facility, equipment and tooling * Basic computer skills to be able to navigate electronic training, manuals, and maintenance data bases * Effectively and clearly communicate (i.e., speak, write, read) in English * Any other job-related duties as assigned by supervisor or management. Your Education: A High school diploma or equivalent. A valid driver's license approved for airline travel and/or a valid passport is ideal, but not mandatory. Your Experience: AMT I: Airframe or Powerplant license is required. Airframe license is preferred. 0-2 years of experience in aviation maintenance, avionics, or similar. These technicians have limited to moderate knowledge of general maintenance aspects Technicians require close supervision of general maintenance tasks AMT II: Airframe or Powerplant license is required. Airframe license is preferred. 2-4 years of experience working in aviation maintenance Experience working on corporate aircraft is preferred but not essential. These technicians have considerable knowledge of the job and general maintenance aspects. Technicians require general supervision on routine maintenance and more detailed instruction for new or special assignments. AMT III: Airframe license is required; in addition, Powerplant license is highly preferred 4-6+ years' experience in aviation maintenance Experience working on corporate aircraft is highly preferred but not essential. These technicians have full knowledge of general, detailed, and special assignments in aircraft maintenance AMT IV (Master) Airframe and Powerplant license is required. 6+ years' experience in aviation maintenance Must have extensive experience on corporate aircraft platforms Subject matter expert in all areas of the job Your Initiative: We're looking for team players who are self-motivated and able to perform in a fast-paced environment where working under specific deadlines and time constraints will be common. Your Sense of Responsibility: Attend work every day as scheduled to include overtime and weekend assignments. Notify supervisor in advance of shift starting if unable to work. Must have reliable transportation to get to work each day. Perform all work in accordance with Federal Aviation Administration guidelines. Follow all company and safety rules during performance of duties. Maintain customer-oriented work habits. Other particulars: Physical Requirements Lifts 50 lbs. Routine walking, bending and squatting or sitting. Routine or repetitive physical motion with arms and hands. Climb ladders and stairs, work in small, restricted areas Standing for long periods of time. Mental Requirements Understanding and implementation of regulations and guidelines. Troubleshoot or evaluate system operation. Work with others in a professional manner. Supervision Work under supervision of assigned Team Leader and Director of Maintenance. May be directed to supervise other technicians in some capacity. Working Conditions Work is performed in a hangar environment subject to extreme temperature variations from very cold to very hot. Work outside during aircraft runs will occur. Varied positions in and around the aircraft. Equipment Used Personal hand tools supplied by the mechanic. Pneumatic, hydraulic and electrical equipment. Jacks, stands, lifts and other support devices. Tugs, power carts and other engine powered equipment.

Job Status/Type: Full time Level II Shift/ Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs. Performs inspections, maintenance, troubleshooting, repair, and annual rehabilitation of a variety of different amusement rides and attractions, depending on level of employee. Areas of responsibility include (but are not limited to) maintenance of gearboxes, chains, sprockets, hydraulic systems, pneumatic systems, wire rope, hoists, brakes, pumps, and large bearings. Climbing and working safely at height is an essential part of this job. Benefits: 3 weeks paid vacation (6 sick days, 8 paid holidays) Several medical coverage options to fit your needs best 401K match Maintenance-specific scholarships available FREE entry to ALL our parks and water parks! Perks: Yearly maintenance appreciation week celebration Complimentary tickets for friends and family Discounts on food and park merchandise Full-time and part-time employee events and gatherings Responsibilities: Job responsibilities include but are not limited to: Performs daily, weekly, monthly, annual, and other required inspections of amusement rides and related equipment as assigned, taking corrective actions as issues are identified. Inspections are visual as well as auditory. Trouble shoots a variety of mechanical, pneumatic, hydraulic, and electrical systems and takes appropriate corrective actions. Properly follows all repair procedures and maintains accurate documentation of all repairs. Maintains orderly and accurate records of all required inspections and work performed and submits required paperwork to supervision in a timely manner. Communicates the status of assigned rides both verbally and in written format. Maintains all assigned equipment in a safe and ready condition according to all applicable codes, laws, rules, company policies, and best practices. Reads, understands, and applies information from manufacturer's manuals for service, repair and or component replacement. Accurately reads blueprints (mechanical, pneumatic, and hydraulic). Completes proper documentation as required. Interacts with and communicates with various groups and individuals, such as the immediate supervisor, other Park managers and staff, co-workers, guests, vendors, contractors, inspectors, etc. Provides guest service according to Six Flags standards when serving the guest, including initiating guest interactions, answering questions, and giving directions. Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Six Flags safety guidelines and requirements and reports all unsafe or unusual conditions to supervisor. Meets scheduling availability requirements, including nights, weekends and holiday periods to meet business needs. Meets Six Flag's attendance requirements as outlined in Six Flag's attendance policies. Adheres to Six Flag's code of conduct including costuming and grooming standards as outlined in employees' Guidelines and other park/division specific policies and procedures. Performs other duties as assigned. Qualifications: Knowledge, Skills & Abilities: Strong knowledge of control processors, components, and communication networks used in real-time industrial applications. Strong proficiency in developing and reading one-line diagrams, and technical documents. Proficient at maintaining various rides and attractions. Good judgment, decision making and problem-solving skills. Effective verbal and written communication skills. Education: High school diploma or equivalent. License or Certification: Must meet location-specific requirements to work on specific rides and attractions. State or provincial certifications and/or licensing within if applicable in state. Valid driver's license. Welding certification preferred. Experience: Typically requires 4-6 years mechanical maintenance experience, including at least 2 years working on rides. Equivalency: Directly related experience or a combination of directly related education and experience and/or competencies may be considered in place of the above requirements.

*Structural Mechanic II in GAC Savannah* *Unique Skills:* Must have strong blueprint interpretation skills Must be able to work any shift *Education and Experience Requirements* High School Diploma or GED required. 2 years related structural assembly experience. Experience working with Solumina and Smarteam preferred.. In a team oriented work environment, under minimal supervision, Structural Mech II performs a variety of structural assembly operations in a production department following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. *Job Description* Principle Duties and Responsibilities:Essential Functions: * Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft . * Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure . * Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents . * Check all work and ensure a defective free assembly prior to final inspection . * Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . * Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information . * Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . * Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required. * Able to work with minimal supervision on duties and tasks . * Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) . * Properly use and maintain company-provided tools and equipment and returns items to tool room after use . * Ensure standard operating procedures are followed when operating ground support equipment . Additional Functions: * Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags . * Ensure accurate daily job charging to the aircraft . * Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership . * Assist in maintaining shop equipment and associated JSAs . * Support Lean Activities . Perform other duties as assigned.Other Requirements: * Must be able to read and interpret blue prints. * Basic computer skills and basic shop math skills. * Must be able to read a scale and perform basic shop math. * Read and comprehend basic documents and instructions. * Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. * Must demonstrate good housekeeping and safety practices. * Ability to work with composite resins and materials. * Must be able to work any shift. * Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs. * Must be able to read, write, speak, and understand the English language. *Additional Information* Requisition Number: 229716 Category: Operations Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 02/24/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. [Legal Information]( | [Site Utilities]( | [Contacts]( | [Sitemap]( Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. [A General Dynamics Company]( Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft