Aircraft mechanic jobs in College Station, TX - 783 jobs

Ability to work variable shifts (i.e. scheduled and unscheduled overtime; weekends and holidays) to support mission requirements and workload This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Required Skills/Qualifications: • 4+ years of experience working with non-porous metals, such as aluminum, titanium, and stainless • 4+ years of experience working with schematics, specifications, assembly drawings and standard operating procedures •4+ years of experience using structures hand tools such as drills 45 and 90 degrees, pancake adapters, counter sink cages, hole finders, and rivet guns • 4+ years of experience working heavy structures: locating, drilling, countersinking and fastening structures (i.e. doublers, stringers, webs, seat tracks, etc.) to aircraft

HOT JOB! If you or someone you know are qualified and interested, please contact me here on LI or at ***********************. Please email updated revised resumes, US Citizenship required to apply. San Antonio, TX $50 Per Hour with AP $45 Per Hour With-Out AP $600 Extra Weekly in Per Diem for those that qualify Selected candidates will have: • 4+ years of on-aircraft heavy structures experience. Please clearly indicate on your resume your aircraft platform experience and years of experience with aircraft heavy structures. • Demonstrated experience on close tolerance drilling, reaming, removal, and installation to critical support structures including doublers, triplers, seat tracks, planks, stringers, etc. • The ability to obtain customer approval for aircraft access, for which Dual citizenship or prior citizenship of any other country may preclude the ability to obtain access. This mechanic will maintain, repair and modify aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

*Structural Mechanic 4 in GAC Fort Worth* *Unique Skills:* At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. *Aviation Sheetmetal experience required. * *The base compensation range for this role is $31.19 - $36.38 per hour.* *Final compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience, and location.* *Gulfstream employees benefit from a total rewards package that includes competitive compensation, comprehensive benefits plans, wellness programs, paid leave and tuition assistance. Our U.S. benefits package includes:* * *Medical, prescription, dental and vision coverage* * *Life and disability insurance* * *Retirement savings plan* * *Employee assistance plan* * *Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance.* *Education and Experience Requirements* High School Diploma or GED required. 6 years related structural assembly experience. Experience working with Solumnia and Smarteam preferred.. Q-stamp preferred. *Position Purpose*:In a team oriented work environment, independently performs a variety of structural assembly operations using required. tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. Assists and instructs other team members. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. *Job Description* Principle Duties and Responsibilities:Essential Functions: * Use ability as a skilled specialist to contribute to the development of employees and techniques and completes work in innovative and effective ways . * Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements . * Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications . * Ability to move to new tasks with minimal, short-term impact to established goal hours and schedule . * Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structures . * Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size for rivets, hole pattern for rivets, cutand form plastics and follow standard operating procedures when using adhesives, sealants and solvents . * Check all work and ensure a defect free assembly prior to final inspection . * Mentor, train, and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems . * Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . * Align and assembles parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners . * Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . * Plan and organize workloads and resource requirements to meet or exceed goal hours and schedule expectations. Assist in overseeing projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks . * Maintain a neat and orderly work area, supports the company 5S, Lean Initiative Program, and complies with all safety regulations . * Support Lean Activities, comply with all safety, 5S, and housekeeping policies. Perform other duties as assigned.Other Requirements: * Good working knowledge of computers and related software. * Must be able to read and interpret blue prints. * Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Should be able to use all tools required. to do the job. * Must be able to use mathematical formulas by solving dimensional problems using fractions, decimal fractions and whole numbers. * Thorough knowledge in the use of multiple measuring devices, demonstrated ability to use within specified tolerance. * Must be able to work any shift. * Must be able to lift 50 lbs. * Must be able to climb ladders, stands, stairs and work in small spaces and/or restricted areas. * Must be able to read, write, speak, and understand the English language. This job requires one to be able to read, write, speak, and understand the English language. *Additional Information* Requisition Number: 229888 Category: Operations Percentage of Travel: Up to 25% Shift: Multiple Shifts Employment Type: Full-time Posting End Date: 01/09/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. [Legal Information]( | [Site Utilities]( | [Contacts]( | [Sitemap]( Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. [A General Dynamics Company]( Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Join a Global Leader in Workforce Solutions - Net2Source Inc. Who We Are Net2Source Inc. isn't just another staffing company, we're a powerhouse of innovation, connecting top talent with the right opportunities. Recognized for 300% growth in the past three years, we operate in 34 countries with a global team of 5,500+. Our mission? To bridge the talent gap with precision-Right Talent. Right Time. Right Place. Right Price. Job Title: A319 Retrofit Interiors Engineer Location: Fort Worth, TX Duration: 12 months Pay Range: $55 - $60/hr Job Description: This position is to provide support to cabin electrical, IFE, and WIFI systems. Support repair and alterations of the cabin electrical systems via EO or EA. • Working with other engineering teams, create or revise task cards, AMM, IPC, AWDM, and CMMs for cabin electrical systems. • Investigate and develop fixes for reliability items on cabin electrical systems. • Work with suppliers and OEMs to develop alterations to existing systems, including possible removal and replacement of a system or component to support ongoing efforts. • Support line operations by review of daily out-of-service aircraft or degraded systems and provide technical support. Qualifications: • BS is Engineering (required, not Engineering Technology and not Engineering Management), Electrical Engineering preferred. • Ten or more years of experience in aircraft In-Flight Entertainment, WiFi, or aircraft cabin electrical systems. • Experience with airline processes and procedures. Airlines experience preferred. • Must have good interpersonal skills, work well with others in a group, and be self-motivated and able to prioritize workload and multiple high-priority items. Why Work With Us? We believe in more than just jobs-we build careers. At Net2Source, we champion leadership at all levels, celebrate diverse perspectives, and empower you to make an impact. Think work-life balance, professional growth, and a collaborative culture where your ideas matter. Our Commitment to Inclusion & Equity Net2Source is an equal opportunity employer, dedicated to fostering a workplace where diverse talents and perspectives are valued. We make all employment decisions based on merit, ensuring a culture of respect, fairness, and opportunity for all, regardless of age, gender, ethnicity, disability, or other protected characteristics. Awards & Recognition • America's Most Honored Businesses (Top 10%) • Fastest-Growing Staffing Firm by Staffing Industry Analysts • INC 5000 List for Eight Consecutive Years • Top 100 by Dallas Business Journal • Spirit of Alliance Award by Agile1 Ready to Level Up Your Career? Click Apply Now and let's make it happen.

Let your career take off with PSA Airlines About PSA PSA Airlines, a wholly owned subsidiary of American Airlines, offers unparalleled opportunities for growth and professional development. We value teamwork, diversity, and inclusivity and strive to create a safe, respectful, and happy work environment for our more than 4,000 employees. Our company culture, known as The PSA Way, is our foundation for operation and fosters stability, growth and a focus on the future while always placing safety at the forefront of everything we do. We are driven in our goals and achievements, eager to be better. We are reliable to one another and accountable for our actions. And we are caring in our daily interactions, with teammates, colleagues, and customers. Join our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. Benefits PSA offers the benefits you expect from a company focused on excellence. All eligible team members enjoy a comprehensive benefits package, including: Travel privileges on the American Airlines global network A generous vacation plan designed to let you enjoy your travel perks 401(k) with company match American Airlines Group (AAG) profit-sharing and bonus opportunities A choice of three health plan options, all with nationwide coverage with the UnitedHealthcare Choice Plus network Premium dental coverage Vision plan options provided, including a plan that covers both glasses and contacts every year Benefits navigation services, including finding a doctor, scheduling an appointment, understanding your medical bills, and free second opinion services Access to 24-hour virtual urgent care services Family planning and fertility treatment LGBTQ+ friendly services including gender affirming care, assistance finding knowledgeable providers, and family planning Company-paid Life and AD&D Insurance, Short-term and Long-term Disability, and supplemental life insurance options for spouses and dependent children Flexible Spending Accounts for both Health Care and Dependent Care services Comprehensive Employee Assistance Program providing a range of services, including 5 free in-person sessions with a health care professional Responsibilities Position Summary As the Airframe and Powerplant (A&P) Technician, you will impact PSA Airlines' business growth by conducting aviation repairs and services that allow for operations to be on time. By executing maintenance procedures in compliance with Federal Aviation Regulations and company standards, you are ensuring safe and reliable flights. Job Responsibilities Will perform tasks necessary to comply with Federal Aviation Regulations and accept the responsibility for work performed by themselves and/or in conjunction with others and sign for same on the Company's approved forms. Keep work areas clean. Return all equipment and tools to assigned areas. A&P Technicians will report all inoperative or faulty equipment to the Maintenance Supervisor or Lead Mechanic in charge. Work will consist of and include any and all phases of repair and maintenance of aircraft with the aid of the employee's own tools, specialty tools provided by the Company, the use of test equipment, and Company-supplied technical manuals. In certain cases, and A&P Technician may be authorized to perform required inspection items and assist in Company training programs. Will at the commencement of each repair or inspection initiate the proper documentation. Parts tags will include a complete description of the discrepancy on all removed parts. Determine if the work to be performed is a Required Inspection Item. Verifying, through proper documentation, that any part installed on any aircraft or component is approved for that aircraft or component and has been visually inspected and is free of damage or contamination. Assure that hangar workshops and other areas assigned are maintained in an orderly manner. Responsible for the Company's Security and Safety Management System (SMS) and associated Safety Risk Management and Safety Assurance outputs. Perform other duties as assigned by the Maintenance Supervisor through the Lead Mechanic. Position Specifics Qualifications Required Current FAA Airframe and Powerplant certification. High school diploma or equivalent. Valid, state-issued Driver's License. Capable of using respirators and other personal protective equipment including eye and hearing protection. Must possess or have ability to obtain a U.S. Passport or equivalent within 90 days of starting position. Must be able to speak, read, and write in English. Must be able to demonstrate authorization to work in the US. Preferred Previous experience with CRJs Additional Information Work Environment: This job operates inside a climate controlled building. This role routinely uses standard office equipment such as computers, telephones, photocopiers, facsimile machines and filing cabinets. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms. Security Clearance: All employees are required to pass the fingerprint-based criminal history records check (CHRC) per 49CFR1542.209. AAP/EEO Statement: PSA Airlines is an equal opportunity employer; qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, age, disability, genetic information, protected veteran status or any other characteristic protected by law. Other Duties: Please note this job description is not designated to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

RAVN Group ("RAVN") is pushing the boundaries of innovation in the aviation industry, focusing on cutting-edge technology and advanced aerospace solutions. As part of the RAVN team, you'll be at the forefront of revolutionizing pilot training on military grade aircrafts and aerospace engineering in the defense sector. RAVN provides combat or high maneuver training for pilots, RDT&E, and maintenance services with its fully owned fleet of aircraft. Job Description: Department Summary The RAVN Aerospace Maintenance Department is a mission-focused, highly skilled team dedicated to ensuring the safety, readiness, and performance of our tactical aircraft fleet. With over 50 years of combined experience supporting military adversary air programs, our team brings deep expertise in tactical aviation maintenance. Staffed by certified A&P aircraft mechanics, technicians, quality assurance professionals, and logisticians, we deliver precise, efficient, and compliant maintenance operations. Our commitment to operational excellence is central to RAVN's mission, enabling safe, seamless, and reliable flight operations in demanding environments. Position Summary The ideal candidate for the Aircraft Mechanic position is a technically astute, disciplined, and team-oriented professional with a strong background in egress systems. Reporting to the Site Lead, this individual will perform organizational, intermediate, and limited depot-level maintenance on assigned aircraft, components, and equipment-including inspection, operational testing, repair, modification, and troubleshooting. The role requires advanced technical expertise to resolve complex issues and provide guidance and instruction to fellow team members. Candidates must demonstrate professionalism, productivity, and responsiveness to the needs of the company, colleagues, and customers. Flexibility is essential, as cross-training and additional duties may be assigned at leadership's discretion to meet evolving mission demands. Requirements Oversee the inspection, repair, overhaul, and maintenance of aviation life support equipment (ALSE), including helmets, oxygen systems, survival gear, and other critical aircrew safety equipment. Perform detailed inspections, routine maintenance, and functional testing of egress systems, including MK-10 ejection seats, canopies, and explosive devices, ensuring all systems are mission-ready and compliant. Develop, implement, and manage comprehensive maintenance schedules to maintain optimal performance and compliance with aviation safety regulations and industry standards. Conduct regular quality assurance audits and inspections to verify compliance with military and FAA standards, identifying and correcting discrepancies. Maintain accurate and detailed records of all inspections, repairs, modifications, and component tracking in accordance with regulatory and internal documentation procedures. Collaborate with aircraft maintenance teams to coordinate repairs, upgrades, and replacements, minimizing downtime and maximizing fleet availability. Provide training and guidance to aircrew and maintenance personnel on the proper use, care, handling, and emergency procedures for life support equipment. Monitor industry trends, regulatory changes, and emerging technologies in aviation life support and egress systems; integrate best practices into operational procedures. Assist in the development and continuous improvement of standard operating procedures (SOPs), policies, and compliance protocols. Serve as the primary point of contact for regulatory audits and inspections related to life support equipment and ensure full compliance with applicable standards. Coordinate with procurement and supply chain teams to ensure timely sourcing and availability of parts, equipment, and consumables necessary for mission support. Have or have the ability to obtain a secret clearance. Desired Experience/Skills A&P Prior military Martin Baker and OEM seat experience. Minimum of 8 years of hands-on experience in aviation life support equipment (ALSE) maintenance, with a strong technical foundation in inspection, servicing, and repair. At least 4 years of specialized experience performing inspections, overhauls, and routine maintenance on MK-10 Ejection Seats. Deep understanding of aviation safety regulations, technical standards, and best practices related to egress and life support systems. Proven track record in performing precise equipment inspections, diagnosing faults, executing repairs, and ensuring maintenance compliance. Strong organizational skills with exceptional attention to detail and the ability to manage multiple priorities in a fast-paced, mission-driven environment. Effective leadership and communication skills with experience supervising or mentoring diverse technical teams. Proficient in Microsoft Office applications and maintenance tracking software; comfortable navigating digital tools for documentation and scheduling. Self-motivated and proactive with a problem-solving mindset and the ability to make informed decisions under pressure. Support Equipment Operator License (Tow Tractor, N2 Servicing Trailer, and Mobile Start Unit at a minimum). Physical Demands Occasional lifting of up to 50 pounds. Regular use of hands and fingers to handle, feel, or operate objects, tools, or controls, reaching with hands. Regularly ascend/descend stairs. Occasional aircraft hangar or warehouse environment with exposure to loud noises, fumes from engines and chemicals, unpredictable climate (hot/cold), and electrical shock, or trip or slip hazards. May be exposed to or required to handle hazardous material. Specific work hours determined by operational, departmental, or contractual requirements. Occasional evening, weekend, holiday work may be required. Travel to various work sites may be required. Other duties as assigned. Work Authorization Must be lawfully eligible to work in the United States and complete an I-9 Form. Must have a clean driving record. RAVN Aerospace is a Drug & Alcohol-Free Workplace. Pre-employment, random, or for cause drug/alcohol testing (including for marijuana) required. Pre-employment and ongoing physical certifications. RAVN Aerospace is an EEO/AA/Disabled/Veterans Employer I understand that if an offer of employment is made, I may be required to undergo investigation into all statements and references contained in this application. Said investigation may include credit, driving, criminal background, professional references, and other background checks. By applying for this position, I authorize post-offer investigation into my background as necessary and as a condition of employment. Note: a criminal conviction does not constitute an automatic bar to employment and will be considered only as it substantially relates to the position in question.

ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. * Inspecting and repairing ground support equipment * Installing and removing Quick Engine Change (QEC) kits on aircraft engines * Dealing with Coworkers/Clients/public JOB DUTIES: Responsibilities may include, but are not limited to: * Performing engine QEC buildup actions, both assembly and tear down. * Uses automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems * Inspects, tests, and operates GSE to determine equipment serviceability and proper operation * Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and components * Removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories * Stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses * Disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations * Operates, cleans, inspects, and services GSE towing vehicles; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations. * Practices good housekeeping, tool control, Foreign Object Damage prevention and safety at all times. * Additional responsibilities include working with a variety of repair and test equipment including welders, torches, pressure testers and electrical testers to name a few. * Completing all required documentation and tagging requirements of QEC items. * Order QEC parts from COMBS. * Refer to technical publications to determine specifications to be met. * Track and record calibration dates to insure that support equipment is up to date. * Keep files with documentation and certifications of calibrated equipment. * Ensure that equipment is sent out for calibration when due. * Ensure that all equipment is accounted for. * Assign I.D. numbers to each piece of equipment. * When turning over equipment to the operating command make certain to have them sign a receipt for all equipment to keep on file in COMBS. * Each LD. number must have a file of record. * Performs maintenance and inspections on (GSE) according to applicable maintenance manuals, manufacturer specifications and FAA regulations. * Research and order materials for repair of support equipment. * Performs engine QEC build-up actions, i.e. assembly and teardown. * Cleaning of warehouse, shops, offices and restrooms as required. * Clerical and other assigned duties as required. * Prepares GSE for storage and transportation * Other Duties as assigned * Abide by all Company policies and procedures not otherwise noted above. QUALIFICATIONS: * Knowledge, Skills, and Abilities (Required Skills include the ability to:) * Understanding of scheduling techniques and technical order requirements. * Ability to accurately troubleshoot and repair complex aircraft engine/support equipment systems. * Mental and visual ability to read and understand detailed technical publications and instructions. * Ability to communicate effectively, both orally and in writing. * Ability to deal courteously with the customer. * Knowledge of generally accepted accounting principles sufficient to perform the job, duties, and tasks associated with the position. * Knowledge of contractual requirements. * Extensive working knowledge in logistics and data information systems. * Education and Experience: * Graduation from a standard four (4) year high school or equivalent (GED). * Thirty-six (36) months in one or more of the maintenance trades or the * Minimum three (3) years recent aircraft maintenance experience * Valid FAA Airframe and Power plant Certificate Benefits include the following: * Healthcare coverage * Retirement Plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays * Learning and Development resources * Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

**Aircraft Mechanic III (LUH72) A&P** Performs scheduled and unscheduled aircraft maintenance, to include repairs, modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise and guidance to solve complex problems by interpreting technical data such as; blue prints and manufactures manuals. + Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft Sheetmetal/structural modification and repair and the ability to determine functionality of complex electrical systems. + Required thorough knowledge of aircraft mechanical component troubleshooting, diagnosing problems, repair procedures and replacement of parts require broad knowledge of aircraft sheet metal/structural modifications and repair. + Required basic knowledge of electrical theory. + Required to have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. + Required working knowledge of making entries in aircraft logbooks & records, military technical publications, and the Army's Unit Level Logistics Aviation Information System, ULLSAE. + Required to have thorough knowledge of aircraft sheet metal and structural modification and repair. + Required to have the ability to determine functionality of non-complex electrical systems. + Required to have detailed knowledge of aircraft unique tools such as cable tensiometers. + Accomplishes inspections including, but not limited to preflight, thru-flight, basic post-flight, and phase inspections. + Launches and recovers aircraft as required. + Performs operational checks of all aircraft systems and maintains aircraft appearance and cleanliness. + Operates all associated ground support equipment and uses hand tools, special tools, and fixtures applicable to aircraft. + Performs all tasks associated with ground movement of aircraft. + Annotates maintenance actions in aircraft records/forms and completes associated CAMS entries. + Practices good housekeeping, tool control, FOD Awareness and prevention and safety at all times. + Perform other qualified duties as assigned. **Minimum Requirements** + Knowledge of the use of aircraft hand tools, special tools, and test equipment is required. + Must have a working knowledge of aircraft safety requirements and know how to operate portable firefighting equipment. + The ability to read, interpret, and comprehend schematic diagrams, drawings, charts, and technical publications are required. + Must be able to routinely lift and/or move objects weighing up to 50 pounds. + Must be able to perform duties of the job including, but not limited to, standing, lifting, bending, pushing, and pulling for extended periods of time. + Frequently required to climb or balance and work in small spaces, ladder work and working at heights at or above 40feet is required. + Required valid up-to-date A&P license and required to have five years aviation maintenance experience, five years rotary wing aircraft experience, and two years on the assigned MDS. All experience must be within the ten most recent years. + If no A&P license, required to have five years aviation maintenance experience, five years rotary wing aircraft experience, and two years on the assigned Mission Design Series (MDS). All experience must be within the ten most recent years. + All mechanics assigned to perform maintenance on FAA certified aircraft must meet FAA requirements. + Required to possess the level of experience necessary to inspect all required aeronautical type maintenance to be performed by skill class Mechanic I and must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. + Required thorough knowledge of aircraft mechanical component troubleshooting, diagnosing problems, repair procedures and replacement of parts require broad knowledge of aircraft sheet metal/structural modifications and repair. + Required basic knowledge of electrical theory. + Required thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. + Required working knowledge of making entries in aircraft logbooks & records, military technical publications, and the Army's Unit Level Logistics Aviation Information System, ULLSAE. + Required thorough knowledge of aircraft sheet metal and structural modification and repair. + Required ability to determine functionality of non-complex electrical systems. + Required detailed knowledge of aircraft unique tools such as cable tensiometers. + Driver's License + High School Diploma or Equivalent required. + Must provide own Tools/ Toolbox / Tools must be shadowed and etched with PID + Must be able to travel as required for LUH mission **Clearance Requirements:** + Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility. **Physical Requirements:** + The diversity of work conditions may range from an environment where there is little or no physical discomfort to an environment where inclement weather may subject individual to severe changes of temperature, wind, rain, or snow, ice, etc. + May be required to work in areas where high noise hazards prevail. May be exposed to fumes or airborne particles. + May be exposed to electrical shock hazards. + Must be able to routinely lift and/or move objects weighing up to 50 pounds. + Must be able to perform duties of the job including, but not limited to, standing, lifting, bending, pushing, and pulling for extended periods of time. + Frequently required to climb or balance and work in small spaces, ladder work and working at heights at or above 40feet is required. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

JOB TITLE: Aircraft Mechanic II - Free Housing Support PAY RATE: $35-40/hour We are a national staffing firm partnering with top-tier aerospace companies, and we are seeking first-class employees to join our clients' teams! Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Why Join Us? Contract Length: 12 months (with potential extension) Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority as a Tier 1 supplier Opportunities: Thousands of openings nationwide Housing Assistance: up to two weeks if applicable Summary: Sealing, painting, shimming, preserving aircraft structure. Reading and interpreting engineering drawings. Using tooling for structural parts modification and repair. Performing flight controls installation, removal, and rigging. Adhering to safety and operating procedures. Required Skills: MUST BE US PERSONS 4+ years of on-aircraft general maintenance experience. Experience with Depot Level/Heavy General maintenance. Proficiency in aircraft systems: hydraulic, flight control, monuments, landing gears, fuel systems, engines. Ability to interpret engineering drawings and perform modifications. Eligibility for aircraft access approval (may exclude dual citizens). Knowledge of shop mathematics and practices. Proficiency in schematics, assembly drawings, and computer skills. Flexibility to work varied shifts, including weekends and holidays. Desired Skills: FAA A&P License or Military Technical School equivalent. Experience with aircraft engine runs and borescope inspections. Certification to operate equipment like forklifts and mobile cranes. About Us: The Structures Company is a leading aerospace staffing agency, providing top-tier talent to major OEMs and Tier 1 suppliers. We specialize in contract, contract-to-hire, and direct hire placements in engineering, production, IT, maintenance, and support roles. Eligibility Requirements: U.S. Citizenship required under ITAR regulations: A U.S. person is defined as a lawful permanent resident or a protected individual under 8 U.S.C. 1324b(a)(3). Keywords: Aerospace, Aviation, Engineering, Maintenance, Aircraft Design Take your aerospace career to new heights-apply today!

**Duties and Accountabilities:** Performs the troubleshooting and rewiring of complex avionics/electronic systems and subsystems discrepancies and modifications. Performs aircraft inventory, acceptance and transfer inspections. . Assists in P&E report preparation. May be required to perform off-site service on assigned detachments. Maintain assigned aircraft in accordance with Navy, Manufacturer and Company Instructions. Use provided test equipment and Ground Support Equipment to perform assigned tasks. Read, interpret, and apply instructions from Blueprints, schematics and other approved data. Assist with ordering parts, tools, materials and equipment as required. Document work accomplished on Maintenance Action Forms (MAF) or NALCOMIS/APAS System. Familiarization with OPNAV 4790.2 Series and other applicable Navy Instructions, Manufacturer Manuals and Company Instructions. Maintain cleanliness of the work center and around your assigned work area. Responsible for adhering to all applicable Foreign Object Damage (FOD) prevention rules and regulations. Responsible for adhering to Company Tool Control Program. Must comply with established General and Industrial Safety Rules and Regulations as applicable to the contract, facilities and job assignment. Ensure proper operation and use of special test equipment and Ground Support Equipment. Maintain Appropriate records of all work accomplished. May be required to perform simple computer input functions. Must be able to perform other duties as assigned. Must be willing and able to stand rotating shifts. Must be able to travel 25% of the time. Must be able to attain (within 6 months of start date) and maintain all necessary security clearances required for this position. **Qualification Standards:** Must have minimum of High school diploma or equivalent. Must have three (3) years experience within the last six (6) years in aircraft electrical/avionics maintenance, including avionics corrosion detection, treatment and prevention, performing maintenance on avionics and/or electrical systems, utilizing tools, blueprints, drawings, wiring diagrams, schematics, and normal safety requirements. Satisfactory completion of U.S. Armed Forces aircraft avionics school or other schools with equivalent curriculum or three (3) years of on the job training and/or experience required. Must be able to meet any Government/Company licensing/qualification requirements for the position. Must be able to obtain the level of security clearance required by the Government. Must be a US citizen. Must be able to obtain and maintain the required government clearance and CAC card. As a government contractor, Vertex Aerospace requires all employees to be fully vaccinated as a condition of employment in accordance with Executive Order 14042. Exceptions to this policy are granted on a case-by-case basis for those that request a religious or medical accommodation. A vaccination status form and proof of vaccination, if applicable, are required. **Physical/Environmental Demands:** This classification activity is usually accomplished in a hangar/shop/flight line environment and as such requires the scope of physical movements and postures normally associated with these activities. Physical Effort: Climbing, standing, stooping, bending, pushing, kneeling, stretching, extensive walking and working in tiring uncomfortable positions. May be required to lift objects whose weight normally will not exceed 50 pounds. Special vision abilities required to perform this job are close vision, peripheral vision, depth perception and the ability to adjust and focus. The diversity of work conditions may range from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject individual to severe changes of temperature, wind, rain, etc. May be required to work in areas where high noise hazards prevail. May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards. **Licensing/Certification Requirements:** The following must be obtained with in the first six (6) months of start date, unless otherwise specified: -Formal or Specialized Training/Equivalent -Hazardous Waste Communications Training -FOD and TCP Awareness Trained -Security Clearance Awareness Training -OPNAV INST 4790.2 Program Awareness -ISO 9001-2000 Program Awareness -NALCOMIS -Valid State Drivers License (must have upon hire) -Support Equipment Operator Certification -Electrostatic Discharge (ESD) Awareness Certification -Fuel Surveillance Trained -Aircraft Towing Certified -Aircraft Turnup Certification # -Egress System Checkout -Aircraft Brake Rider Certified -Hydraulic Contamination -Tire and Wheel Certification -Operational Risk Management (ORM) Training -Collateral Duty Inspector (CDS) (may be required) # What We Bring + At V2X, we strive to be market competitive in our total reward offerings. + The successful candidate's starting pay will be based on, but not limited to, their job-related skills, experience, qualifications, work location, and market conditions. + Please speak with a recruiter for additional information. + Employee benefits include the following: + Healthcare coverage + Retirement plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources + Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. **Qualifications** **Education** **Required** + High School or better Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.

Specific Duties and Responsibilities: Perform daily mechanical inspections and repairs to ride structures and units Maintain and trouble shoot amusement rides and park equipment Maintain records for maintenance and inspections performed Work with other departments as needed to complete duties Maintain compliance with all safety rules, procedures, and regulations Maintain positive interaction with other employees and guests Other tasks and duties as assigned Job Requirements: Must be at least 18 years old, and possess a high school diploma or equivalent A varied skill set including knowledge of general maintenance, welding, and machine shop repair Must have experience in industrial or heavy equipment maintenance and repair procedures Must be able to work flexible hours including days, nights, weekends, holidays, and extended hours as scheduled Must be willing to work under various weather conditions Must be able to lift up to 50lbs. Highly motivated, self-starter and great time management Must have own basic hand tools Must be able to climb and work at heights over 50 feet Must be able to stoop, bend, and lift regularly Must have a valid driver's license, a good driving record This is a part-time position working up to 29 hours per week and will pay $17.00. If you are able to answer "YES" to all of the following questions, please continue the application process by clicking "Apply" Can you provide legal documentation establishing your identity and eligibility to be legally employed in the United States? Are you able to perform the essential functions of the job for which you are applying with or without reasonable accommodation? Within the last 90 days, can you state that you have not used illegal or social drugs (excluding marijuana), such as MDMA (Molly), cocaine and crystal methamphetamine? I am willing to agree that future text messages relating to Six Flags, Inc., including company news, job posting application status updates, and other information, may be sent on behalf of Six Flags, Inc. to the cell phone number I provide.

*Structural Mechanic 3 in GAC Fort Worth* *Unique Skills:* At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. *Aircraft Sheetmetal experience required.* *The compensation range for this role is $28.73 - $33.52 per hour.* *Final compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience, and location.* *Gulfstream employees benefit from a total rewards package that includes competitive compensation, comprehensive benefits plans, wellness programs, paid leave and tuition assistance. Our U.S. benefits package includes:* * *Medical, prescription, dental and vision coverage* * *Life and disability insurance* * *Retirement savings plan* * *Employee assistance plan* * *Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance.* *Education and Experience Requirements* High School Diploma or GED required. 4 years related structural assembly experience. Experience working with Solumina and Smarteam preferred.. Q-stamp preferred. *Position Purpose*:In a team oriented work environment, under little to no supervision, Structural Mech III perform a variety of structural assembly operations using required. tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. May assist and instruct other team members. *Job Description* Principle Duties and Responsibilities:Essential Functions: * Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements. Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft . * Possess the proven ability to move to new tasks with only a moderate, short-term impact to established goal hours and schedule . * Rivet structural members, assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Ability to remove fasteners without damaging structures . * Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents . * Check all work and ensure a defective free assembly prior to final inspection . * Instruct and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems . * Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . * Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information . * Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . * Maintain a neat and orderly work area, supports the company 5S & Lean Initiative Program and complies with all safety regulations. Use of personal protective equipment as required. Additional Functions: * Participate in continuous improvement activities . * Properly use and maintain company-provided tools and equipment and returns items to tool room after use . * Ensure standard operating procedures are followed when operating ground support equipment . * Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags . * Ensure accurate daily job charging to the aircraft . * Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership . Perform other duties as assigned.Other Requirements: * Basic computer and basic shop math skills. * Read and comprehend basic documents and instructions and read a scale. * Must have essential personal skills and possess aptitude for hands-on craftswork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. * Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. * Ability to work with composite resins and materials. * Must be able to work any shift. * Must be able to climb ladders, stands, stairs, and work in small spaces or restricted areas & lift 50 lbs. This job requires one to be able to read, write, speak, and understand the English language. *Additional Information* Requisition Number: 229889 Category: Operations Percentage of Travel: Up to 25% Shift: Multiple Shifts Employment Type: Full-time Posting End Date: 01/09/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. [Legal Information]( | [Site Utilities]( | [Contacts]( | [Sitemap]( Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. [A General Dynamics Company]( Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

RAVN Group ("RAVN") is pushing the boundaries of innovation in the aviation industry, focusing on cutting-edge technology and advanced aerospace solutions. As part of the RAVN team, you'll be at the forefront of revolutionizing pilot training on military grade aircrafts and aerospace engineering in the defense sector. RAVN provides combat or high maneuver training for pilots, RDT&E, and maintenance services with its fully owned fleet of aircraft. Job Description: Department Summary The RAVN Aerospace Maintenance Department is a mission-focused, highly skilled team dedicated to ensuring the safety, readiness, and performance of our tactical aircraft fleet. With over 50 years of combined experience supporting military adversary air programs, our team brings deep expertise in tactical aviation maintenance. Staffed by certified A&P aircraft mechanics, technicians, quality assurance professionals, and logisticians, we deliver precise, efficient, and compliant maintenance operations. Our commitment to operational excellence is central to RAVN's mission, enabling safe, seamless, and reliable flight operations in demanding environments. Position Summary The ideal candidate for the Aircraft Mechanic position is a technically astute, disciplined, and team-oriented professional. Reporting to the Site Lead, this individual will perform organizational, intermediate, and limited depot-level maintenance on assigned aircraft, components, and equipment-including inspection, operational testing, repair, modification, and troubleshooting. The role requires advanced technical expertise to resolve complex issues and provide guidance and instruction to fellow team members. Responsible for the maintenance, inspection, troubleshooting of Airframe and Powerplant systems on the A-27 Tucano and BAe Hawk aircraft, reporting to the Maintenance Lead in the accomplishment of the following functions supporting Close Air Support flights. Candidates must demonstrate professionalism, productivity, and responsiveness to the needs of the company, colleagues, and customers. Flexibility is essential, as cross-training and additional duties may be assigned at leadership's discretion to meet evolving mission demands. Requirements Repair, replace and rebuild aircraft structures, system, and functional components. Assemble and install electrical, avionic, mechanical, hydraulic, structural components and accessories using hand tools and power tools. Develop, implement, and manage comprehensive maintenance schedules to maintain optimal performance and compliance with aviation safety regulations and industry standards. Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems. Conduct regular quality assurance audits and inspections to verify compliance with military and FAA standards, identifying and correcting discrepancies. Service, repair, troubleshoot and modify aircraft and aircraft engines. Perform storage and shipment requirements on engines and support equipment to include documentation. Repair, rework and replace components or parts of CFSE to ensure proper operation. Refer to workbooks and technical publications to determine specifications to be met. Perform routine support equipment inspections and maintains and performs necessary corrective actions to include unscheduled maintenance. Maintain accurate and detailed records of all inspections, repairs, modifications, and component tracking in accordance with regulatory and internal documentation procedures. Collaborate with aircraft maintenance teams to coordinate repairs, upgrades, and replacements, minimizing downtime and maximizing fleet availability. Monitor industry trends, regulatory changes, and emerging technologies in aviation life support and egress systems; integrate best practices into operational procedures. Assist in the development and continuous improvement of standard operating procedures (SOPs), policies, and compliance protocols. Comply with all company, OSHA and customer safety regulations. Coordinate with procurement and supply chain teams to ensure timely sourcing and availability of parts, equipment, and consumables necessary for mission support. Load and download aircraft weapons systems. Have or have the ability to obtain a secret clearance. Desired Experience/Skills A&P Prior military Proven track record in performing precise equipment inspections, diagnosing faults, executing repairs, and ensuring maintenance compliance. Strong organizational skills with exceptional attention to detail and the ability to manage multiple priorities in a fast-paced, mission-driven environment. Effective leadership and communication skills with experience supervising or mentoring diverse technical teams. Proficient in Microsoft Office applications and maintenance tracking software; comfortable navigating digital tools for documentation and scheduling. Self-motivated and proactive with a problem-solving mindset and the ability to make informed decisions under pressure. Support Equipment Operator License (Tow Tractor, N2 Servicing Trailer, and Mobile Start Unit at a minimum). Physical Demands Occasional lifting of up to 50 pounds. Regular use of hands and fingers to handle, feel, or operate objects, tools, or controls, reaching with hands. Regularly ascend/descend stairs. Occasional aircraft hangar or warehouse environment with exposure to loud noises, fumes from engines and chemicals, unpredictable climate (hot/cold), and electrical shock, or trip or slip hazards. May be exposed to or required to handle hazardous material. Specific work hours determined by operational, departmental, or contractual requirements. Occasional evening, weekend, holiday work may be required. Travel to various work sites may be required. Other duties as assigned. Work Authorization Must be lawfully eligible to work in the United States and complete an I-9 Form. Must have a clean driving record. RAVN Aerospace is a Drug & Alcohol-Free Workplace. Pre-employment, random, or for cause drug/alcohol testing (including for marijuana) required. Pre-employment and ongoing physical certifications. RAVN Aerospace is an EEO/AA/Disabled/Veterans Employer I understand that if an offer of employment is made, I may be required to undergo investigation into all statements and references contained in this application. Said investigation may include credit, driving, criminal background, professional references, and other background checks. By applying for this position, I authorize post-offer investigation into my background as necessary and as a condition of employment. Note: a criminal conviction does not constitute an automatic bar to employment and will be considered only as it substantially relates to the position in question.

JOB TITLE: Aircraft Mechanic II - VC Electrical - Free Housing Support PAY RATE: $35-40/hour MUST BE US PERSONS We are a national staffing firm partnering with top-tier aerospace companies, and we are seeking first-class employees to join our clients' teams! Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Why Join Us? Contract Length: 12 months (with potential extension) Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority as a Tier 1 supplier Opportunities: Thousands of openings nationwide Housing Assistance: Up to two weeks, if applicable (terms and conditions may vary). Summary: Seeking Electrical Mechanics to support the VC-25B Program in San Antonio, TX. Candidates must have 4+ years of on-aircraft electrical installation and modification experience, including routing and terminations of various wiring systems. This role involves electrical modifications, troubleshooting, and testing on aircraft systems, ensuring compliance with engineering and safety standards. Required Skills: 4+ years of on-aircraft electrical installation and modification experience. Experience with routing and terminating shielded wires, coaxial cables, and fiber optic wiring. Ability to read and interpret engineering drawings, technical orders, and schematics. Proficiency in modifying, troubleshooting, and testing electrical and environmental systems. Hands-on experience with wire harness sealing, wrapping, bonding, and tying. Knowledge of shop mathematics, electrical/electronic theories, and systems. Proficient in aircraft-related computer systems and basic office software. Ability to obtain customer approval for access (dual citizenship or prior foreign citizenship may preclude access). Willing to work various shifts, weekends, and overtime as needed. Ability to lift 35 lbs, work in confined spaces, ascend/descend ladders, and operate in high-noise environments. Desired Skills: Experience working on a Modification Program. Ability to operate forklifts, mobile cranes, and electric-powered elevating equipment. High school diploma or equivalent. About Us: The Structures Company is a leading aerospace staffing agency, providing top-tier talent to major OEMs and Tier 1 suppliers. We specialize in contract, contract-to-hire, and direct hire placements in engineering, production, IT, maintenance, and support roles. Eligibility Requirements: U.S. Citizenship required under ITAR regulations: A U.S. person is defined as a lawful permanent resident or a protected individual under 8 U.S.C. 1324b(a)(3). Keywords: Aerospace, Aviation, Engineering, Maintenance, Aircraft Design Take your aerospace career to new heights-apply today!

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment.

The **Aircraft Mechanic I** **(** **Pneudraulics)** maintains, modifies, and repairs hydraulic and pneumatic systems and components that actuate mechanisms or produce, control, and regulate the flow of fluids (liquids and gases), tests for and isolates malfunctions in hydraulic and pneumatic systems or components, utilizing technical manuals and schematics, and modifies, repairs or disassembles and overhauls systems or components. Key tasks (sample) + Adjusts: + Flight Controls (UH-60) + Integrated Lower Control Actuator (ILCA) (CH-47) + Fabricates: + Metal Tubing + Teflon Hose Assemblies + Maintains: + Hydraulic Pump (CH-47) + The Aviation Ground Power Unit (AGPU) + The Generic Aviation Nitrogen Generator (GANG) + The Hose Tester + Operates: + The Aviation Ground Power Unit (APGU) + The Portable Hydraulic Purification System + Performs: + Bleeding Procedures on Flight Control Hydraulics Systems (CH-47) + Bleeding Procedures on Utility Hydraulics System (CH-47) + Purification of Hydraulic System (CH-47) + Service on Nitrogen Bottles using the Generic Aviation Nitrogen Generator (GANG) + Repairs: + Auxiliary Power Unit (APU) Start Module Accumulator (CH-47) + Bleed Air Shutoff Valve (UH-60) + Hydraulic Reservoir Cooler (CH-47) + Hydraulic System Fill Module (CH-47) + Integrated Lower Control Actuator (ILCA) (CH-47) + Landing Gear Brakes (CH-47) + Main Landing Gear Shock Struts (UH-60) + Main Landing Gear Wheel Brake (UH-60) + Main Rotor Damper (UH-60) + Parking Brake Valve Assembly + Tail Landing Gear Shock Strut (UH-60) + Tubing using Perma-swage Method + Replaces: + (CH-47) Rosan Adapters + Pitch Trim Assembly Stability Augmentation System (SAS) Servo Valve (UH-60) + Stability Augmentation System (SAS) Actuator (UH-60) + Troubleshoots Pilot Assist Module (UH-60) + Applies corrosion preventative procedures. + Uses and performs operator maintenance on ground support equipment, common and special tools. + Performs limited maintenance operational checks. + Performs scheduled inspections and assists in performing special inspections. + Requisitions bench stock for repair of powertrain systems and subcomponents. + Prepares request for turn ins and repair parts and powertrain components. + Prepares forms and records related to aircraft maintenance. + Removes and disassembles defective parts of the aircraft. + Maintains the supplies and perform preventive maintenance. + Performs additional duties, including maintenance duties, as requested. + Adheres to company policies and safety programs (Safety-first mentality). **Minimum Requirements** + High School Diploma or equivalent is required. + U.S. military technical school or specialized training course is desired, certification of education level is required. + Valid up-to-date A&P license _(optional_ ) + Shall have three years aviation maintenance experience, two years rotary wing aircraft experience, and two years on the assigned Mission Design Series (MDS). All experience must be within the six most recent years. + Valid Driver's License. + Must provide own tools/toolbox. Recruiters will provide toolbox requirements to candidates upon selection. **Clearance Requirements** + Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility. **Knowledge & Skills** + Thorough knowledge of aircraft powertrain systems and subsystems and repair. + Basic knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, hydraulic press machine, and those listed in the assigned MDS Maintenance Allocation Chart (MAC). + Working knowledge of technical publications and Logistics Information Systems. + Able to prioritize workloads to maintain schedules on assigned projects + Possess the level of experience to inspect all required aeronautical type maintenance to be performed by an aircraft powertrain mechanic. + The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. **Physical Requirements/Working Environment** + Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. + Must be able to climb stairs, ramps, ladders, and work stands. + Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. + May be required to lift/push/pull heavy objects whose weight may exceed 50 pounds. + Must be able to type using a standard keyboard to communicate through e-mail and various software applications. + Will handle dirty parts and lubricants. + Will be required to wear proper Personal Protective Equipment (PPE). + Must be able to pass a Respirator Physical and Fit Test qualification. + May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. + May work in maintenance shop or outside. + Must be able to work in a shop where the environment is drafty, noisy, and dirty. + May be exposed to extreme noise from operating equipment. + May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. + May be expected to work in austere environments and all-weather conditions. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

Primary responsibility is to repair machinery or mechanical equipment as well as performing engine buildup. Examines Government support equipment (GSE) to diagnose source of trouble. Dismantling or partly dismantling GSE and performing repairs that mainly involve the use of hand tools in replacing broken or defective parts; ordering replacement parts through PMO or sending the equipment out for major repairs; perform scheduled and unscheduled maintenance. **ESSENTIAL FUNCTIONS:** The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. + Inspecting and repairing ground support equipment + Installing and removing Quick Engine Change (QEC) kits on aircraft engines + Dealing with Coworkers/Clients/public **JOB DUTIES:** Responsibilities may include, but are not limited to: + Performing engine QEC buildup actions, both assembly and tear down. + Uses automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems + Inspects, tests, and operates GSE to determine equipment serviceability and proper operation + Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and components + Removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories + Stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses + Disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations + Operates, cleans, inspects, and services GSE towing vehicles; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations. + Practices good housekeeping, tool control, Foreign Object Damage prevention and safety at all times. + Additional responsibilities include working with a variety of repair and test equipment including welders, torches, pressure testers and electrical testers to name a few. + Completing all required documentation and tagging requirements of QEC items. + Order QEC parts from COMBS. + Refer to technical publications to determine specifications to be met. + Track and record calibration dates to insure that support equipment is up to date. + Keep files with documentation and certifications of calibrated equipment. + Ensure that equipment is sent out for calibration when due. + Ensure that all equipment is accounted for. + Assign I.D. numbers to each piece of equipment. + When turning over equipment to the operating command make certain to have them sign a receipt for all equipment to keep on file in COMBS. + Each LD. number must have a file of record. + Performs maintenance and inspections on (GSE) according to applicable maintenance manuals, manufacturer specifications **and** FAA regulations. + Research and order materials for repair _of_ support equipment. + Performs engine QEC build-up actions, i.e. assembly and teardown. + Cleaning of warehouse, shops, offices and restrooms as required. + Clerical and other assigned duties as required. + Prepares GSE for storage and transportation + Other Duties as assigned + Abide by all Company policies and procedures not otherwise noted above. **QUALIFICATIONS:** + **Knowledge, Skills, and Abilities (Required Skills include the ability to:)** + Understanding of scheduling techniques and technical order requirements. + Ability to accurately troubleshoot and repair complex aircraft engine/support equipment systems. + Mental and visual ability to read and understand detailed technical publications and instructions. + Ability to communicate effectively, both orally and in writing. + Ability to deal courteously with the customer. + Knowledge of generally accepted accounting principles sufficient to perform the job, duties, and tasks associated with the position. + Knowledge of contractual requirements. + Extensive working knowledge in logistics and data information systems. + **Education and Experience:** + Graduation from a standard four (4) year high school or equivalent (GED). + Minimum three (3) years recent aircraft maintenance experience + Valid FAA Airframe and Power plant Certificate **Benefits include the following:** + Healthcare coverage + Retirement Plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources _Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans._ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Repair, operate, rehab, and provide general maintenance to park rides and equipment. SPECIFIC DUTIES AND RESPONSIBILITIES: Perform daily mechanical inspections and repairs to ride structures and units Maintain and trouble shoot amusement rides and park equipment Maintain records for maintenance and inspections performed Work with other departments as needed to complete duties Maintain compliance with all safety rules, procedures, and regulations Maintain positive interaction with other employees and guests Other tasks and duties as assigned SKILLS AND QUALIFICATIONS: One to Two years of maintenance experience involving industrial or heavy equipment maintenance and mechanical repair procedures Should have a varied skill set including knowledge of general maintenance, welding, and machine shop repair Must be able to work varied shifts, days, nights, and weekends including extended hours when required and willing to work under various weather conditions Must be physically able to climb stairs and ride units with heights of 50 or more feet Must be able to lift up to 50 pounds and stand for extended periods of time Must be able to stoop, bend, and lift regularly Must be self-motivated and able to perform tasks with minimal supervision Must be at least 18 years of age and possess a high school diploma or equivalent Able to provide own basic hand tools Must possess a valid driver's license, a good driving record, and successfully complete all authorized employment screenings and criminal background checks