Aircraft mechanic jobs in Danbury, CT

WIN Waste Innovations is looking for a 3rd Class Maintenance Mechanic who will be responsible for the installation, troubleshooting, cleaning, inspecting and maintenance of mechanical equipment throughout the facility in a safe and professional manner. Responsibilities: Initiates and completes work-orders and requisitions and documents all critical and or pertinent information on a routine basis. Ability to use and become proficient with Computer Maintenance software (Tabware) Respond and report to work during off hours when emergency repairs are required/ ability to be on call. Troubleshoot equipment, diagnose problems, and make necessary repairs. Operate mobile equipment including, but not limited to, industrial forklifts, manlifts, skid steer type loaders, and other mobile equipment. Perform Routine maintenance and repairs around facility grounds, Identify and repair potential safety hazards Preferred Requirements: Tech Schooling Experience Proven mechanical abilities in previous jobs Experience with Oxy-Acetylene torch usage Ability to read and record measurements with precision Welding, soldering, brazing, pipe fitting Certificates and Licenses Licenses as required by Local, State, Federal, Environmental and/or Health/Safety Regulatory agencies. Work Environment: Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Noise in work environment Physical Demand: Stand Sit for prolonged periods of time Walk Handle tools, equipment, fine motor skills Reach with hands and arms Climb and walk on heights often greater than 4 feet Stoop, kneel, bend, push, pull, crawl Ascend and descend stairs and stationary vertical ladders as part of normal work activity and emergency egress situations Lift 50 lbs. Move about all areas of the plant, including catwalks, deck grating, and uneven surfaces Close vision, distance vision, peripheral vision, depth perception, corrected or otherwise Operate a 1.5-inch fire hose operating at 125 psi line pressure to the extent required to extinguish fire Operate fire extinguishing equipment ranging from handheld extinguishers to 200 lb portable units Access confined spaces and pressure vessels through standard 12" by 16" manways PPE Required: Work in areas under adverse conditions that may require the donning and use of personal protective equipment including, but not limited to, the following with average fatigue: Negative pressure respirator Positive pressure respirator Self-contained breathing apparatus (steel or composite bottle) Hardhat Approved safety shoes Eye protection Rubber suit and gloves Chemical resistant suit Heat resistant outerwear Flame resistant outerwear Approved hearing protection Gloves Safety harness What You'll Enjoy: Industry leading benefits Multiple and flexible medical plans Outstanding PTO program Floating Holidays Strong 401k program and company match Tuition reimbursement plan College loan reimbursement College scholarship program for dependents Parental Leave Program Inclusive culture Employee engagement events Employee resource groups WIN Waste Innovations is a waste management company committed to delivering essential waste management solutions to customers and communities supported by our team of 2,300 employees. We believe in preserving our environment for future generations while providing for today's needs. WIN Waste Innovations is a vertically integrated business with a platform of 50 strategically located collection, transfer, and disposal assets. These include waste-to-energy facilities, transfer stations, ash monofills, landfills, and fleets of rail cars and collection vehicles. We process more than 11 million tons of waste annually, converting 6.7 million tons of waste into clean, renewable energy that powers 340,000 homes. We recycle more than 234,000 tons of plastic, paper, and metals from the waste stream. At WIN Waste Innovations, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short-Term Disability. As well as Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled.

As a Mechanic at Bridor, you'll be at the heart of keeping our production running smoothly. Working closely with the Maintenance Supervisor, you'll troubleshoot, repair, and maintain critical production equipment, ensuring it's always operating at its best. Your work will directly contribute to delivering high-quality baked goods to customers across the country. This is more than just a maintenance role; it's a chance to be part of a team that drives excellence and innovation every day. Shift Available: Day Shift (6 a.m. to 3 p.m.) Sunday - Thursday (subject to change as needed) Flexibility Required: Must be willing and able to rotate to any of the 3 shifts as necessary to cover operations, maintenance functions, or absences. Responsibilities: Troubleshoot & Repair: Quickly assess equipment issues and implement fixes to keep the production line moving. You'll work with a variety of mechanical, electrical, and pneumatic systems Preventative Maintenance: Conduct proactive maintenance to ensure our equipment is always running at peak performance. You'll use computerized maintenance systems to keep track of all maintenance activities Fabrication & Installations: Get hands-on by fabricating parts, structures, and equipment to improve production capabilities. You'll also help install new equipment to ensure we continue growing and innovating Safety First: Maintain the highest standards for safety and food safety regulations, making sure we meet or exceed Good Manufacturing Practices (GMPs) What We're Looking For: Experience: You've worked as a Maintenance Mechanic, ideally in a food processing or bakery manufacturing environment, and are ready to bring your expertise to our team Problem-Solving Skills: You love a challenge and can quickly troubleshoot and repair a wide variety of equipment to ensure maximum uptime Mechanical/Technical Expertise: You have strong mechanical, electrical, and electromechanical aptitude, and can read prints, schematics, and manuals to identify and order parts Team Player: You're a great communicator and thrive in a team-focused environment where collaboration and innovation are key to success Other Requirements: Ability to think on your feet and make quick, effective decisions Organizational skills that keep you ahead of the game, even when things get busy Basic computer proficiency, including Microsoft Office, to track maintenance activities and communicate effectively WHO IS BRIDOR? At Bridor, we've been creating exceptional bakery products since 1984. As part of the global Groupe LeDuff , we're continually expanding and innovating, ensuring that we stay at the forefront of the bakery industry. Our team is passionate, driven, and dedicated to producing the best quality products for our customers. Joining Bridor means you'll be part of a company that values quality, teamwork, and forward-thinking . We're proud of our diverse and inclusive culture, and we're always looking for talented people who are ready to contribute and make an impact. Ready to Join Our Team? If you're ready to bring your skills to a company that values your contributions and offers a supportive, exciting, and rewarding work environment, then we want to hear from you!

West Star is the fastest growing maintenance repair organization in the industry and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. The main responsibility of the Service Hub Flex Technician will be to support either the TEB, Teterboro, NJ or HPN, White Plains, NY Service Hubs depending on aircraft demand, this position can be based in either TEB or HPN. What you can expect as an Aircraft Maintenance Technician at West Star: Whether you are replacing or repairing parts, troubleshooting electrical/mechanical/hydraulic and pneumatic systems or performing inspections on some of the most sophisticated civilian aircraft in the world, no day is the same. What is the same, is that each day will bring new experiences and opportunities for growth. You will be ESSENTIAL to many FUNCTIONS including: Performing general mechanical tasks on aircraft and related systems. Removal and installation of panels and components, Troubleshooting and problem solving aircraft system/component issues De-fueling aircraft, Engine removal/installations, Operating ground support equipment, Inspection and evaluation of the aircraft and components Aircraft movement and assistance in performance runs/ taxiing Maintenance and repair of shop facility, equipment and tooling Immediately notify the Lead Mechanic of any problem areas such as parts, materials, workmanship, or airworthiness issues. Provides the Lead Mechanic with a detailed report of work progression and open items to be included in the shift turnover log Proper tagging of Aircraft components, parts, and panels appropriately stored including racks by aircraft. Basic computer skills to be able to navigate electronic training, manuals, and maintenance data bases Willing and able to work rotating shifts including, nights, holidays, weekends and days off. Effectively and clearly communicate (i.e., speak, write, read) in English Any other job-related duties as assigned by supervisor or management. What you'll need to bring with you: Your Education: A High school diploma or equivalent, and Airframe and Powerplant License are required. A valid driver's license approved for airline travel and/or a valid passport is ideal Your Initiative: We're looking for team players who are self-motivated and able to perform in a fast paced environment where working under specific deadlines and time constraints will be common. Your Sense of Responsibility: Attend work every day as scheduled to include overtime and weekend assignments. Notify supervisor in advance of shift starting if unable to work. Must have reliable transportation to get to work each and every day. Perform all work in accordance with Federal Aviation Administration guidelines. Follow all company and safety rules during performance of duties. Maintain customer oriented work habits.

Company: New York State Electric & Gas, an Avangrid Company Department: Electric T&D Operations Job Title: Chief Line Mechanic -SSWU Work Model: Office and Field is dependent upon experience, ranging from $65.61-$66.61. Responsibilities * Under general supervision, regularly supervises the work of a line crew consisting of not more than 4 other men on all types of construction and maintenance and on energized or de-energized transmission and distribution conductors, structures and equipment. (See Memorandum governing bonus pay for Chief Lineman and Lineman 1/C assigned additional supervisory responsibility dated 9/29/68.) * May be required to: (1) make voltage and current tests on low voltage circuits; (2) connect or disconnect electric and/or gas meters; (3) perform any incidental work necessary to serve electric and/or gas customers; (4) handle trouble calls; (5) do high voltage switching. * Assists or relieves Line Foreman when required. * Performs any of the duties of a 1/C Lineman and other related or less skilled work as directed. Skills and Requirements * Should have had at least two years' experience as First-Class Lineman. * Must be able to perform operations of considerable complexity and variety where standard methods of procedure are available. Equivalent to 4 years of high school; or 2 years of high school plus 2 years apprenticeship or trade school training. * Must have a working knowledge of the layout and characteristics of the transmission and distribution lines in the area to which he is assigned and a working knowledge of electrical fundamentals as related to the construction, operation, and maintenance of such lines. * Must be thoroughly familiar with Company's Electrical and Mechanical Tagging Rules. * Must be familiar with Company's Safety Rules, approved Methods of Resuscitation on or off the ground, and able to render practical First Aid. * Must be able to qualify for required license for vehicles driven. Qualifications Physical Qualifications: Normal health, physique and use of senses as indicated by passing the required physical examination given by a Company Physician, including color perception. Strength and endurance adequate for arduous labor in all kinds of outdoor weather conditions. Personal Qualifications: Must be willing to work irregular and/or extra hours as required. Must be willing to work under unusual or special working conditions and surroundings, as well as the normal working conditions pertaining to this job. Must be particularly alert in observing hazards and avoiding accidents. Must be capable of making and holding to decisions with fairness. Must be tactful in handling employee relations problems. Must be able to receive and transmit orders and instructions in such a manner as to inspire respect and confidence of both superiors and subordinates. Must be capable of, and willing to assume supervisory responsibilities. Competencies * Be a role model * Be agile * Collaborate and Share * Develop Self & Others * Empower to grow * Focus to achieve results * Technical Skills Company: NY STATE ELECTRIC & GAS CORP Mobility Information Please note that any applicant who is not a citizen of the country of the vacancy will be subject to compliance with the applicable immigration requirements to legally work in that country. At Avangrid we provide fair and equal employment and advancement opportunities for all employees and candidates regardless of race, color, religion, national origin, gender, sexual orientation, age, marital status, disability, protected veteran status or any other status protected by federal, state, or local law. If you are an individual with a disability or a disabled veteran who is unable to use our online tool to search for or to apply for jobs, you may request a reasonable accommodation by contacting our People and Organization department at ********************. Avangrid employees may be assigned a system emergency role and in the event of a system emergency, may be required to work outside of their regular schedule/job duties. This is applicable to employees that will work in Connecticut, Maine, Massachusetts, and New York within Avangrid Network and Corporate functions. This does not include those that will work for Avangrid Power. Avangrid employees may also be assigned a NERC Reliability Standards compliance role supporting Critical Infrastructure Protection (CIP) and/or Operations and Planning (O&P) responsibilities. This is applicable to employees that will work in electric transmission, operations, and cyber security business areas in Connecticut, Maine, Massachusetts, and New York within Avangrid Network and Corporate business areas. NERC Reliability Standards compliance roles and responsibilities may include additional access protections, training, audit engagement, and required evidence retention, and will be communicated by the employee's management. Job Posting End Date: January-5-2026

Job Description Are you interested in becoming a part of an innovative in-house maintenance facility working on private aircraft? Flexjet, an award winning organization, is currently looking for an experienced, certified Aircraft Maintenance Technician (AMT) to join our team! This position will be responsible for performing routine inspections, troubleshooting, and repairs including airframe structures, engines and aircraft systems. The Aircraft Maintenance Technician (AMT) will make repairs and conduct tests to keep equipment operating efficiently and safely. Please note, this position will require working nights. This position is located in White Plains, New York. Starting Pay Rate $ 85,120.00 + (based on experience). DUTIES & RESPONSIBILITIES Perform all airframe and powerplant repairs and modifications required to meet company and FAA requirements Remove and disassemble defective parts; assemble and install of replacement parts and testing aircraft system Operate all power tools and equipment necessary to accomplish job assignments Complete all required maintenance records in an accurate manner to include accurately reporting of times required to accomplish the tasks assigned Must support all company policies and safety programs to include OSHA and EPA regulations Interpret technical manuals, drawings and blueprints Present a clean and neat work area Demonstrate professionalism and deliver satisfaction to the internal/external customer Perform other related duties & responsibilities as assigned EDUCATION & EXPERIENCE FAA Airframe & Powerplant License is required 2-4 years directly related aviation experience (corporate aircraft experience preferred) At least 2 years of fleet type experience desired Good working knowledge of Federal Aviation Regulations (FAR) Part 145, 135, 121 Sheet metal experience is preferred but not required REQUIRED SKILLS Successful candidate will be highly motivated and work effectively under pressure and time constraints Must have the ability to multi-task within a team environment Strong working knowledge of Windows and MS Office programs Possess proven inspection competencies Must be detail-oriented and well organized; demonstrate excellent communication skills, and a positive attitude Specialized aircraft tooling will be furnished by the company WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme weather conditions. The noise level in the work environment and job sites can be loud. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 10 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Eversource will not offer immigration\-related sponsorship for this position\. Applicants who require immigration sponsorship-either now or in the future-should not apply\. This includes, but is not limited to, direct company sponsorship, listing Eversource as the employer of record on immigration documents, or any work authorization that requires company involvement or documentation \(e\.g\., H\-1B, OPT, STEM OPT, CPT, TN, J\-1, O\-1, etc\.\)\. Eversource Energy is the largest Energy delivery company in New England\. We support 4\.4 million customers in Connecticut, Massachusetts and New Hampshire\. Be a part of our mission to deliver reliable energy and superior customer service\. ENERGY\- BRINGS US TOGETHER\!\! **THIS IS A FULLY QUALIFIED LINE MECHANIC POSITION** **POSITION DESCRIPTION:** The individual will perform work involved in the construction, operation, and maintenance of the electric system\. A Fully Qualified Line Mechanic position requires at least one year of experience\. A line mechanic is responsible for the installation, repair and maintenance of overhead and underground electrical power lines and auxiliary equipment\. This includes working aloft on electric utility poles or on ground and pad mounted structures\. Must have the ability to climb poles skillfully with Lineman's climbers; and the ability to direct the work of others when assigned are required\. The selected candidate must be qualified to hold and possess a Commercial Driver's License \(CDL\)\. Rubber gloving of high voltage distribution systems up to 23KV is a requirement\. The individual will be required, during periods of trouble call assignment, to be available at the reporting base within approximately one\-half hour\. **_The salary range for this position starts at $54\.68 and progresses in accordance with the union contract\. Check out the career site for an overview of benefits\. \-_** **_Hours/Days of the position is 4\-10s \(M - Thurs\) schedule and the reporting location will be a show up site \(Oxford or Litchfield\)\._** **JOB QUALIFICATIONS:** + **High school diploma or equivalent\.** + **It is preferred that individuals hold a valid Commercial driver's license \(CDL\) and satisfactory clean driving record\.** + **Must be physically able to perform the "essential duties" of the Line Mechanic position, as described above\.** + **Must be able to effectively interact, communicate, and direct the work of other co\-workers\.** + **Must be available to perform overtime and emergency work as required and live within one half hour of the reporting location ** **Emergency Response:** Responding to emergency situations to meet customers' needs is part of every employee's role\. If employed, you will be given an Emergency Restoration assignment\. This means you may be called to assist during an emergency outside of your normal responsibilities, work hours and location\. Bargaining unit employees under the TEAL contract will be given first consideration\. In addition, this position is being posted internally and externally\. Candidates must successfully pass the written assessment and the overhead physical agility assessment\. Qualified candidates must submit a resume with their application\. \#elecajd **Competencies:** Build trusting relationships Manage and develop people Foster teamwork and cross\-functional collaboration Lead change Communicate strategic vision Create an engaged workforce Focus on the customer Take ownership & accountability Build trusting relationships **Worker Type:** Regular **Number of Openings:** 1 **Emergency Response:** Responding to emergency situations to meet customers' needs is part of every employee's role\. If employed, you will be given an Emergency Restoration assignment\. This means you may be called to assist during an emergency outside of your normal responsibilities, work hours and location\. **EEO Statement:** Eversource Energy is an Equal Opportunity and Affirmative Action Employer\. All qualified applicants will receive consideration for employment without regard to age, race, color, sex, sexual orientation, gender identity, national origin, religion, disability status, or protected veteran status\. VEVRRA Federal Contractor

As a Mechanic at Bridor, you'll be at the heart of keeping our production running smoothly. Working closely with the Maintenance Supervisor, you'll troubleshoot, repair, and maintain critical production equipment, ensuring it's always operating at its best. Your work will directly contribute to delivering high-quality baked goods to customers across the country. This is more than just a maintenance role; it's a chance to be part of a team that drives excellence and innovation every day. Shift Available: Day Shift (6 a.m. to 3 p.m.) Sunday - Thursday (subject to change as needed) Flexibility Required: Must be willing and able to rotate to any of the 3 shifts as necessary to cover operations, maintenance functions, or absences. Responsibilities: Troubleshoot & Repair: Quickly assess equipment issues and implement fixes to keep the production line moving. You'll work with a variety of mechanical, electrical, and pneumatic systems Preventative Maintenance: Conduct proactive maintenance to ensure our equipment is always running at peak performance. You'll use computerized maintenance systems to keep track of all maintenance activities Fabrication & Installations: Get hands-on by fabricating parts, structures, and equipment to improve production capabilities. You'll also help install new equipment to ensure we continue growing and innovating Safety First: Maintain the highest standards for safety and food safety regulations, making sure we meet or exceed Good Manufacturing Practices (GMPs) What We're Looking For: Experience: You've worked as a Maintenance Mechanic, ideally in a food processing or bakery manufacturing environment, and are ready to bring your expertise to our team Problem-Solving Skills: You love a challenge and can quickly troubleshoot and repair a wide variety of equipment to ensure maximum uptime Mechanical/Technical Expertise: You have strong mechanical, electrical, and electromechanical aptitude, and can read prints, schematics, and manuals to identify and order parts Team Player: You're a great communicator and thrive in a team-focused environment where collaboration and innovation are key to success Other Requirements: Ability to think on your feet and make quick, effective decisions Organizational skills that keep you ahead of the game, even when things get busy Basic computer proficiency, including Microsoft Office, to track maintenance activities and communicate effectively WHO IS BRIDOR? At Bridor, we've been creating exceptional bakery products since 1984. As part of the global Groupe LeDuff, we're continually expanding and innovating, ensuring that we stay at the forefront of the bakery industry. Our team is passionate, driven, and dedicated to producing the best quality products for our customers. Joining Bridor means you'll be part of a company that values quality, teamwork, and forward-thinking. We're proud of our diverse and inclusive culture, and we're always looking for talented people who are ready to contribute and make an impact. Ready to Join Our Team? If you're ready to bring your skills to a company that values your contributions and offers a supportive, exciting, and rewarding work environment, then we want to hear from you! Shift Available: Day Shift (6 a.m. to 3 p.m.) Sunday - Thursday (subject to change as needed) Flexibility Required: Must be willing and able to rotate to any of the 3 shifts as necessary to cover operations, maintenance functions, or absences.

Are you interested in becoming a part of an innovative in-house maintenance facility working on private aircraft? Flexjet, an award winning organization, is currently looking for an experienced, certified Aircraft Maintenance Technician (AMT) to join our team! This position will be responsible for performing routine inspections, troubleshooting, and repairs including airframe structures, engines and aircraft systems. The Aircraft Maintenance Technician (AMT) will make repairs and conduct tests to keep equipment operating efficiently and safely. Please note, this position will require working nights. This position is located in White Plains, New York. Starting Pay Rate $ 85,120.00 + (based on experience). DUTIES & RESPONSIBILITIES Perform all airframe and powerplant repairs and modifications required to meet company and FAA requirements Remove and disassemble defective parts; assemble and install of replacement parts and testing aircraft system Operate all power tools and equipment necessary to accomplish job assignments Complete all required maintenance records in an accurate manner to include accurately reporting of times required to accomplish the tasks assigned Must support all company policies and safety programs to include OSHA and EPA regulations Interpret technical manuals, drawings and blueprints Present a clean and neat work area Demonstrate professionalism and deliver satisfaction to the internal/external customer Perform other related duties & responsibilities as assigned EDUCATION & EXPERIENCE FAA Airframe & Powerplant License is required 2-4 years directly related aviation experience (corporate aircraft experience preferred) At least 2 years of fleet type experience desired Good working knowledge of Federal Aviation Regulations (FAR) Part 145, 135, 121 Sheet metal experience is preferred but not required REQUIRED SKILLS Successful candidate will be highly motivated and work effectively under pressure and time constraints Must have the ability to multi-task within a team environment Strong working knowledge of Windows and MS Office programs Possess proven inspection competencies Must be detail-oriented and well organized; demonstrate excellent communication skills, and a positive attitude Specialized aircraft tooling will be furnished by the company WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme weather conditions. The noise level in the work environment and job sites can be loud. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 10 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

** **The starting salary for this position is $53\.09 per hour and progresses in accordance with the union contract\. Check out the career site for an overview of benefits\.** **\*Effective 6/1/25 the starting salary will be $54\.68 per hour\.** **POSITION DESCRIPTION:** The individual will perform work involved in the construction, operation, and maintenance of the electric system\. A Fully Qualified Line Mechanic position requires at least one year of experience\. A line mechanic is responsible for the installation, repair and maintenance of overhead and underground electrical power lines and auxiliary equipment\. This includes working aloft on electric utility poles or on ground and pad mounted structures\. Must have the ability to climb poles skillfully with Lineman's climbers; and the ability to direct the work of others when assigned are required\. The selected candidate must be qualified to hold and possess a Commercial Driver's License \(CDL\)\. Rubber gloving of high voltage distribution systems up to 23KV is a requirement\. The individual will be required, during periods of trouble call assignment, to be available at the reporting base within approximately one\-half hour\. **JOB QUALIFICATIONS:** + **High school diploma or equivalent \(GED\)\.** + **It is preferred that individuals hold a valid Commercial driver's license \(CDL\) and clean driving record\.** + **Must be physically able to perform the "essential duties" of the Line Mechanic position, as described above\.** + **Must be able to effectively interact, communicate, and direct the work of other co\-workers\.** + **Must be available to perform overtime and emergency work as required and live within one hour of the reporting location** Candidates must successfully pass the written assessment and the overhead physical agility assessment\. **This is a union represented position so anyone going into this position would be required to become a member of the union\.** **Bargaining unit employees under the TEAL contract will be given first consideration\.** Qualified candidates must submit a resume with their application\. \#elecajd **Worker Type:** Regular **Number of Openings** 0 **EEO Statement** Eversource Energy is an Equal Opportunity and Affirmative Action Employer\. All qualified applicants will receive consideration for employment without regard to age, race, color, sex, sexual orientation, gender identity, national origin, religion, disability status, or protected veteran status\. VEVRRA Federal Contractor **Emergency Response:** Responding to emergency situations to meet customers' needs is part of every employee's role\. If employed, you will be given an Emergency Restoration assignment\. This means you may be called to assist during an emergency outside of your normal responsibilities, work hours and location\.

Are you interested in becoming a part of an innovative in-house maintenance facility working on private S76C or S76D aircraft? Flexjet, an award-winning organization, is currently looking for an experienced, certified Aircraft Maintenance Technician (AMT) to join our team! This position will be responsible for performing routine inspections, troubleshooting, and repairs including airframe structures, engines and aircraft systems. The Aircraft Maintenance Technician (AMT) will make repairs and conduct tests to keep equipment operating efficiently and safely. Please note, this position may require working nights. This position is located in White Plains, New York. MINIMUM REQUIRED QUALIFICATIONS Current FAA Airframe and Powerplant Certificate (A&P), avionics / repairman certificate or other specialized skill such as NDT, sheet-meta], painting, etc. Basic set of hand tools Ability to work nights, weekends, holidays and overtime, as necessary Advancement of Level will be predicated upon positive annua] reviews while taking into consideration proficiency of responsibilities along with knowledge, skills, and experience: Level 1 Entry Level Minimum 1-3 years of experience Helicopter experience preferred; not required Successful completion of Level Level 2 Minimum 2-5 years of experience Completed an initial technician training cJass for one of the Flexjet helicopters or completed a training c1ass on initial or advanced troubleshooting Perform routine and non-routine maintenance to ensure aircraft readiness Level 3 Successful completion of Level 2 Minimum 3-6 years of experience Able to troubleshoot Avionics Entry Level ERT Qualifications and Aircraft initial training earned on Aircraft Type not on our Ops Spec will be considered during the hiring or review process. Credit for non-fleet type Aircraft ERT Qualifications, Training, specialized skills or equivalent desirable experience will be at the Hiring /Review Mangers discretion ADDITIONAL QUALIFICATIONS Training/Ability to operate Forklift Training/ Ability to operate Ground Support Equipment Training/ Ability to operate PIV Training/ Ability on Shop Equipment Training/ Ability to Balance Stater/Generator Training/ Ability to Perform Final Ground Runs Training/Ability to use Rads for MIR & T/R Track & Balance PRINCIPAL DUTIES & RESPONSIBILITIES Foster the Flexjet culture while embracing the company fundamental principles Adhere to Flexjet policies and procedures Gain efficiency in performing assigned duties in accordance with applicable technical data and FAA regulations Perform quality inspections, repairs, component replacement and apply corrective actions to maintain the airworthiness of the helicopter Perform basic mechanical and electrical removals and installations Ability to sign off logbook, record component entries and document work performed per appropriate manuals including, but not limited to, Structural Repair Manual (SRM), Aircraft Maintenance Manual and Component Maintenance Manual Operate ground support equipment including, but not limited to jacks, nitrogen and air conditioning servicing carts Support with simple to complex repairs at on-site & off-site location Support with performing engine runs for system operations and troubleshooting Support with fueling or defueling helicopters as needed KNOWLEDGE SKILLS: Basic knowledge of reading and interpreting aircraft blueprints, drawings, diagrams and manuals Basic knowledge of avionics systems or aircraft systems Ability to understand and properly use manuals necessary to perform job including, but not limited to Standard Operation Procedures (SOP), General Operations Manual (GOM), Aircraft Maintenance Manual and Component Maintenance Manual, and Systems Manual Basic skill to assemble helicopter parts and components Skill to use calibrated, hand and specialized tools necessary to perform job Skill to operate ground support equipment as necessary to perform job Skill to measure using a variety of basic and precision measuring devices relating to job function Skill to apply sealing compounds REQUIRED SKILLS Successful candidate will be highly motivated and work effectively under pressure and time constraints Must have the ability to multi-task within a team environment Strong working knowledge of Windows and MS Office programs Possess proven inspection competencies Must be detail-oriented and well organized; demonstrate excellent communication skills, and a positive attitude Specialized aircraft tooling will be furnished by the company Ability to pass background check for airport security badge WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme weather conditions. The noise level in the work environment and job sites can be loud. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 10 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

The starting salary for this position is $53.09 per hour and progresses in accordance with the union contract. Check out the career site for an overview of benefits. *Effective 6/1/25 the starting salary will be $54.68 per hour. POSITION DESCRIPTION: The individual will perform work involved in the construction, operation, and maintenance of the electric system. A Fully Qualified Line Mechanic position requires at least one year of experience. A line mechanic is responsible for the installation, repair and maintenance of overhead and underground electrical power lines and auxiliary equipment. This includes working aloft on electric utility poles or on ground and pad mounted structures. Must have the ability to climb poles skillfully with Lineman's climbers; and the ability to direct the work of others when assigned are required. The selected candidate must be qualified to hold and possess a Commercial Driver's License (CDL). Rubber gloving of high voltage distribution systems up to 23KV is a requirement. The individual will be required, during periods of trouble call assignment, to be available at the reporting base within approximately one-half hour. JOB QUALIFICATIONS: High school diploma or equivalent (GED). It is preferred that individuals hold a valid Commercial driver's license (CDL) and clean driving record. Must be physically able to perform the “essential duties” of the Line Mechanic position, as described above. Must be able to effectively interact, communicate, and direct the work of other co-workers. Must be available to perform overtime and emergency work as required and live within one hour of the reporting location Candidates must successfully pass the written assessment and the overhead physical agility assessment. This is a union represented position so anyone going into this position would be required to become a member of the union. Bargaining unit employees under the TEAL contract will be given first consideration. Qualified candidates must submit a resume with their application. #elecajd Worker Type: Regular Number of Openings 0 EEO Statement Eversource Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, sex, sexual orientation, gender identity, national origin, religion, disability status, or protected veteran status. VEVRRA Federal Contractor Emergency Response: Responding to emergency situations to meet customers' needs is part of every employee's role. If employed, you will be given an Emergency Restoration assignment. This means you may be called to assist during an emergency outside of your normal responsibilities, work hours and location.

Are you interested in becoming a part of an innovative in-house maintenance facility working on private aircraft? Flexjet, an award-winning organization, is currently looking for an experienced, certified Aircraft Maintenance Technician (AMT) to join our team! This position will be responsible for performing routine inspections, troubleshooting, and repairs including airframe structures, engines and aircraft systems. The Aircraft Maintenance Technician (AMT) will make repairs and conduct tests to keep equipment operating efficiently and safely. Please note, this position may require working nights. This position is located in Bridgeport, Connecticut. DUTIES & RESPONSIBILITIES Perform all airframe and powerplant repairs and modifications required to meet company and FAA requirements Remove and disassemble defective parts; assemble and install of replacement parts and testing aircraft system Operate all power tools and equipment necessary to accomplish job assignments Complete all required maintenance records in an accurate manner to include accurately reporting of times required to accomplish the tasks assigned Must support all company policies and safety programs to include OSHA and EPA regulations Interpret technical manuals, drawings and blueprints Present a clean and neat work area Demonstrate professionalism and deliver satisfaction to the internal/external customer Perform other related duties & responsibilities as assigned EDUCATION & EXPERIENCE FAA Airframe & Powerplant License is required 2-4 years directly related aviation experience (corporate aircraft experience preferred) At least 2 years of fleet type experience desired Good working knowledge of Federal Aviation Regulations (FAR) Part 145, 135, 121 Sheet metal experience is preferred but not required REQUIRED SKILLS Successful candidate will be highly motivated and work effectively under pressure and time constraints Must have the ability to multi-task within a team environment Strong working knowledge of Windows and MS Office programs Possess proven inspection competencies Must be detail-oriented and well organized; demonstrate excellent communication skills, and a positive attitude Specialized aircraft tooling will be furnished by the company Ability to pass background check for airport security badge WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme weather conditions. The noise level in the work environment and job sites can be loud. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 10 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

** **The starting salary for this position is $53\.09 per hour and progresses in accordance with the union contract\. Check out the career site for an overview of benefits\.** **\*Effective 6/1/25 the starting salary will be $54\.68 per hour\.** **POSITION DESCRIPTION:** The individual will perform work involved in the construction, operation, and maintenance of the electric system\. A Fully Qualified Line Mechanic position requires at least one year of experience\. A line mechanic is responsible for the installation, repair and maintenance of overhead and underground electrical power lines and auxiliary equipment\. This includes working aloft on electric utility poles or on ground and pad mounted structures\. Must have the ability to climb poles skillfully with Lineman's climbers; and the ability to direct the work of others when assigned are required\. The selected candidate must be qualified to hold and possess a Commercial Driver's License \(CDL\)\. Rubber gloving of high voltage distribution systems up to 23KV is a requirement\. The individual will be required, during periods of trouble call assignment, to be available at the reporting base within approximately one\-half hour\. **JOB QUALIFICATIONS:** + **High school diploma or equivalent \(GED\)\.** + **It is preferred that individuals hold a valid Commercial driver's license \(CDL\) and clean driving record\.** + **Must be physically able to perform the "essential duties" of the Line Mechanic position, as described above\.** + **Must be able to effectively interact, communicate, and direct the work of other co\-workers\.** + **Must be available to perform overtime and emergency work as required and live within one hour of the reporting location** Candidates must successfully pass the written assessment and the overhead physical agility assessment\. **This is a union represented position so anyone going into this position would be required to become a member of the union\.** **Bargaining unit employees under the TEAL contract will be given first consideration\.** Qualified candidates must submit a resume with their application\. \#elecajd **Worker Type:** Regular **Number of Openings** 0 **EEO Statement** Eversource Energy is an Equal Opportunity and Affirmative Action Employer\. All qualified applicants will receive consideration for employment without regard to age, race, color, sex, sexual orientation, gender identity, national origin, religion, disability status, or protected veteran status\. VEVRRA Federal Contractor **Emergency Response:** Responding to emergency situations to meet customers' needs is part of every employee's role\. If employed, you will be given an Emergency Restoration assignment\. This means you may be called to assist during an emergency outside of your normal responsibilities, work hours and location\.

Job Description Are you interested in becoming a part of an innovative in-house maintenance facility working on private aircraft? Flexjet, an award-winning organization, is currently looking for an experienced, certified Aircraft Maintenance Technician (AMT) to join our team! This position will be responsible for performing routine inspections, troubleshooting, and repairs including airframe structures, engines and aircraft systems. The Aircraft Maintenance Technician (AMT) will make repairs and conduct tests to keep equipment operating efficiently and safely. Please note, this position may require working nights. This position is located in Bridgeport, Connecticut. DUTIES & RESPONSIBILITIES Perform all airframe and powerplant repairs and modifications required to meet company and FAA requirements Remove and disassemble defective parts; assemble and install of replacement parts and testing aircraft system Operate all power tools and equipment necessary to accomplish job assignments Complete all required maintenance records in an accurate manner to include accurately reporting of times required to accomplish the tasks assigned Must support all company policies and safety programs to include OSHA and EPA regulations Interpret technical manuals, drawings and blueprints Present a clean and neat work area Demonstrate professionalism and deliver satisfaction to the internal/external customer Perform other related duties & responsibilities as assigned EDUCATION & EXPERIENCE FAA Airframe & Powerplant License is required 2-4 years directly related aviation experience (corporate aircraft experience preferred) At least 2 years of fleet type experience desired Good working knowledge of Federal Aviation Regulations (FAR) Part 145, 135, 121 Sheet metal experience is preferred but not required REQUIRED SKILLS Successful candidate will be highly motivated and work effectively under pressure and time constraints Must have the ability to multi-task within a team environment Strong working knowledge of Windows and MS Office programs Possess proven inspection competencies Must be detail-oriented and well organized; demonstrate excellent communication skills, and a positive attitude Specialized aircraft tooling will be furnished by the company Ability to pass background check for airport security badge WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme weather conditions. The noise level in the work environment and job sites can be loud. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 10 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

** **The starting salary for this position is $53\.09 per hour and progresses in accordance with the union contract\. Check out the career site for an overview of benefits\.** **\*Effective 6/1/25 the starting salary will be $54\.68 per hour\.** **POSITION DESCRIPTION:** The individual will perform work involved in the construction, operation, and maintenance of the electric system\. A Fully Qualified Line Mechanic position requires at least one year of experience\. A line mechanic is responsible for the installation, repair and maintenance of overhead and underground electrical power lines and auxiliary equipment\. This includes working aloft on electric utility poles or on ground and pad mounted structures\. Must have the ability to climb poles skillfully with Lineman's climbers; and the ability to direct the work of others when assigned are required\. The selected candidate must be qualified to hold and possess a Commercial Driver's License \(CDL\)\. Rubber gloving of high voltage distribution systems up to 23KV is a requirement\. The individual will be required, during periods of trouble call assignment, to be available at the reporting base within approximately one\-half hour\. **JOB QUALIFICATIONS:** + **High school diploma or equivalent \(GED\)\.** + **It is preferred that individuals hold a valid Commercial driver's license \(CDL\) and clean driving record\.** + **Must be physically able to perform the "essential duties" of the Line Mechanic position, as described above\.** + **Must be able to effectively interact, communicate, and direct the work of other co\-workers\.** + **Must be available to perform overtime and emergency work as required and live within one hour of the reporting location** Candidates must successfully pass the written assessment and the overhead physical agility assessment\. **This is a union represented position so anyone going into this position would be required to become a member of the union\.** **Bargaining unit employees under the TEAL contract will be given first consideration\.** Qualified candidates must submit a resume with their application\. \#elecajd **Worker Type:** Regular **Number of Openings** 0 **EEO Statement** Eversource Energy is an Equal Opportunity and Affirmative Action Employer\. All qualified applicants will receive consideration for employment without regard to age, race, color, sex, sexual orientation, gender identity, national origin, religion, disability status, or protected veteran status\. VEVRRA Federal Contractor **Emergency Response:** Responding to emergency situations to meet customers' needs is part of every employee's role\. If employed, you will be given an Emergency Restoration assignment\. This means you may be called to assist during an emergency outside of your normal responsibilities, work hours and location\.

** **The starting salary for this position is $53\.09 per hour and progresses in accordance with the union contract\. Check out the career site for an overview of benefits\.** **\*Effective 6/1/25 the starting salary will be $54\.68 per hour\.** **POSITION DESCRIPTION:** The individual will perform work involved in the construction, operation, and maintenance of the electric system\. A Fully Qualified Line Mechanic position requires at least one year of experience\. A line mechanic is responsible for the installation, repair and maintenance of overhead and underground electrical power lines and auxiliary equipment\. This includes working aloft on electric utility poles or on ground and pad mounted structures\. Must have the ability to climb poles skillfully with Lineman's climbers; and the ability to direct the work of others when assigned are required\. The selected candidate must be qualified to hold and possess a Commercial Driver's License \(CDL\)\. Rubber gloving of high voltage distribution systems up to 23KV is a requirement\. The individual will be required, during periods of trouble call assignment, to be available at the reporting base within approximately one\-half hour\. **JOB QUALIFICATIONS:** + **High school diploma or equivalent \(GED\)\.** + **It is preferred that individuals hold a valid Commercial driver's license \(CDL\) and clean driving record\.** + **Must be physically able to perform the "essential duties" of the Line Mechanic position, as described above\.** + **Must be able to effectively interact, communicate, and direct the work of other co\-workers\.** + **Must be available to perform overtime and emergency work as required and live within one hour of the reporting location** Candidates must successfully pass the written assessment and the overhead physical agility assessment\. **This is a union represented position so anyone going into this position would be required to become a member of the union\.** **Bargaining unit employees under the TEAL contract will be given first consideration\.** Qualified candidates must submit a resume with their application\. \#elecajd **Worker Type:** Regular **Number of Openings** 0 **EEO Statement** Eversource Energy is an Equal Opportunity and Affirmative Action Employer\. All qualified applicants will receive consideration for employment without regard to age, race, color, sex, sexual orientation, gender identity, national origin, religion, disability status, or protected veteran status\. VEVRRA Federal Contractor **Emergency Response:** Responding to emergency situations to meet customers' needs is part of every employee's role\. If employed, you will be given an Emergency Restoration assignment\. This means you may be called to assist during an emergency outside of your normal responsibilities, work hours and location\.

** **The starting salary for this position is $53\.09 per hour and progresses in accordance with the union contract\. Check out the career site for an overview of benefits\.** **\*Effective 6/1/25 the starting salary will be $54\.68 per hour\.** **POSITION DESCRIPTION:** The individual will perform work involved in the construction, operation, and maintenance of the electric system\. A Fully Qualified Line Mechanic position requires at least one year of experience\. A line mechanic is responsible for the installation, repair and maintenance of overhead and underground electrical power lines and auxiliary equipment\. This includes working aloft on electric utility poles or on ground and pad mounted structures\. Must have the ability to climb poles skillfully with Lineman's climbers; and the ability to direct the work of others when assigned are required\. The selected candidate must be qualified to hold and possess a Commercial Driver's License \(CDL\)\. Rubber gloving of high voltage distribution systems up to 23KV is a requirement\. The individual will be required, during periods of trouble call assignment, to be available at the reporting base within approximately one\-half hour\. **JOB QUALIFICATIONS:** + **High school diploma or equivalent \(GED\)\.** + **It is preferred that individuals hold a valid Commercial driver's license \(CDL\) and clean driving record\.** + **Must be physically able to perform the "essential duties" of the Line Mechanic position, as described above\.** + **Must be able to effectively interact, communicate, and direct the work of other co\-workers\.** + **Must be available to perform overtime and emergency work as required and live within one hour of the reporting location** Candidates must successfully pass the written assessment and the overhead physical agility assessment\. **This is a union represented position so anyone going into this position would be required to become a member of the union\.** **Bargaining unit employees under the TEAL contract will be given first consideration\.** Qualified candidates must submit a resume with their application\. \#elecajd **Worker Type:** Regular **Number of Openings** 0 **EEO Statement** Eversource Energy is an Equal Opportunity and Affirmative Action Employer\. All qualified applicants will receive consideration for employment without regard to age, race, color, sex, sexual orientation, gender identity, national origin, religion, disability status, or protected veteran status\. VEVRRA Federal Contractor **Emergency Response:** Responding to emergency situations to meet customers' needs is part of every employee's role\. If employed, you will be given an Emergency Restoration assignment\. This means you may be called to assist during an emergency outside of your normal responsibilities, work hours and location\.

Eversource Energy is the largest Energy delivery company in New England\. We support 4\.4 million customers in Connecticut, Massachusetts and New Hampshire\. Be a part of our mission to deliver reliable energy and superior customer service\. ENERGY\- BRINGS US TOGETHER\!\! **THIS IS A FULLY QUALIFIED LINE MECHANIC POSITION** **The salary range for this position starts at $54\.68 and progresses in accordance with the union contract\. Check out the career site for an overview of benefits\.** **POSITION DESCRIPTION:** The individual will perform work involved in the construction, operation, and maintenance of the electric system\. A Fully Qualified Line Mechanic position **REQUIRES at least ONE** **year of experience** \. A line mechanic is responsible for the installation, repair and maintenance of overhead and underground electrical power lines and auxiliary equipment\. This includes working aloft on electric utility poles or on ground and pad mounted structures\. Must have the ability to climb poles skillfully with Lineman's climbers; and the ability to direct the work of others when assigned are **REQUIRED** \. Rubber gloving of high voltage distribution systems up to 23KV is a REQUIREMENT\. The individual will be required, during periods of trouble call assignment, to be available at the reporting base within approximately one\-half hour\. **JOB QUALIFICATIONS & REQUIREMENTS:** + **High school diploma or equivalent \(GED\)** + **It is preferred that individuals hold and maintain a valid Commercial driver's license \(CDL\) and satisfactory clean driving record\.** + **Must be physically able to perform the "essential duties" of the Line Mechanic position, as described above\.** + **Must be able to effectively interact, communicate, and direct the work of other co\-workers\.** + **Must be available to perform overtime and emergency work as required and live within one half hour of the reporting location** Bargaining unit employees under the TEAL contract will be given first consideration\. In addition, this position is being posted internally and externally\. Candidates must successfully pass the written assessment and the overhead physical agility assessment\. Qualified candidates **MUST** submit a resume with their application\. \#elecajd **Competencies:** Build trusting relationships Manage and develop people Foster teamwork and cross\-functional collaboration Lead change Communicate strategic vision Create an engaged workforce Focus on the customer Take ownership & accountability Build trusting relationships **Worker Type:** Regular **Number of Openings** 1 **EEO Statement** Eversource Energy is an Equal Opportunity and Affirmative Action Employer\. All qualified applicants will receive consideration for employment without regard to age, race, color, sex, sexual orientation, gender identity, national origin, religion, disability status, or protected veteran status\. VEVRRA Federal Contractor **Emergency Response:** Responding to emergency situations to meet customers' needs is part of every employee's role\. If employed, you will be given an Emergency Restoration assignment\. This means you may be called to assist during an emergency outside of your normal responsibilities, work hours and location\.

** **The starting salary for this position is $53\.09 per hour and progresses in accordance with the union contract\. Check out the career site for an overview of benefits\.** **\*Effective 6/1/25 the starting salary will be $54\.68 per hour\.** **POSITION DESCRIPTION:** The individual will perform work involved in the construction, operation, and maintenance of the electric system\. A Fully Qualified Line Mechanic position requires at least one year of experience\. A line mechanic is responsible for the installation, repair and maintenance of overhead and underground electrical power lines and auxiliary equipment\. This includes working aloft on electric utility poles or on ground and pad mounted structures\. Must have the ability to climb poles skillfully with Lineman's climbers; and the ability to direct the work of others when assigned are required\. The selected candidate must be qualified to hold and possess a Commercial Driver's License \(CDL\)\. Rubber gloving of high voltage distribution systems up to 23KV is a requirement\. The individual will be required, during periods of trouble call assignment, to be available at the reporting base within approximately one\-half hour\. **JOB QUALIFICATIONS:** + **High school diploma or equivalent \(GED\)\.** + **It is preferred that individuals hold a valid Commercial driver's license \(CDL\) and clean driving record\.** + **Must be physically able to perform the "essential duties" of the Line Mechanic position, as described above\.** + **Must be able to effectively interact, communicate, and direct the work of other co\-workers\.** + **Must be available to perform overtime and emergency work as required and live within one hour of the reporting location** Candidates must successfully pass the written assessment and the overhead physical agility assessment\. **This is a union represented position so anyone going into this position would be required to become a member of the union\.** **Bargaining unit employees under the TEAL contract will be given first consideration\.** Qualified candidates must submit a resume with their application\. \#elecajd **Worker Type:** Regular **Number of Openings** 0 **EEO Statement** Eversource Energy is an Equal Opportunity and Affirmative Action Employer\. All qualified applicants will receive consideration for employment without regard to age, race, color, sex, sexual orientation, gender identity, national origin, religion, disability status, or protected veteran status\. VEVRRA Federal Contractor **Emergency Response:** Responding to emergency situations to meet customers' needs is part of every employee's role\. If employed, you will be given an Emergency Restoration assignment\. This means you may be called to assist during an emergency outside of your normal responsibilities, work hours and location\.