Aircraft mechanic jobs in Eastvale, CA

The CBP Aircraft Mechanic performs maintenance, overhaul, repair, inspection, and aircraft servicing functions on assigned aircraft within an aircraft maintenance and operations environment and in accordance with applicable instructions. Principal Accountabilities: Perform maintenance, preventive maintenance, inspection, repair, and modification of aircraft in accordance with 14 CFR and Department of Defense (DoD) regulations, technical manuals, and other data as applicable. Perform daily and turnaround inspections on all assigned aircraft. Perform inspections, corrosion control, troubleshooting and fault isolation on aircraft systems. May be required to fly on Government aircraft for relocation, to conduct in-flight checks (test flights) and to conduct trouble shooting that cannot be completed on the ground. May be required to perform official travel to temporary duty sites within and outside the United States. Furnish own hand tools to perform maintenance of aircraft (necessary special tools and test equipment will be furnished by the customer). May be required to perform other duties as required to support the overall mission. Minimum Requirements: Must possess and maintain a valid State driver's license. Must be willing to subject themselves to random drug tests. Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship required to obtain clearance. High school graduate or have an equivalency certificate from an accredited program, is required. Must possess a valid FAA Mechanic License with Airframe and Powerplant (A&P) ratings. Must be competent and knowledgeable in the repair and maintenance of both fixed-wing and rotary-wing aircraft and aircraft systems to include airframes, structural, hydraulics, fuel and electrical systems, and aircraft engines. Must be competent and knowledgeable in system troubleshooting, reading and interpretation of schematics, blueprints, technical manuals and FAA, Company, and other Directives. Must be reliable and demonstrate good judgment. Able to follow base, federal and Company procedures for handling and disposal of hazardous waste materials. Ability to meet required deadlines and maintain necessary workflow. Ability to read, write, understand, and communicate in the English language and follow both verbal and written instruction. The ability to comprehend/interpret technical data. Physical Requirements/Working Environment: Be physically able to perform aircraft mechanic duties. Ability to move freely about the interior and meet aircraft specific specs for weight limit. Stand, squat, sit, walk, work with arms overhead for extended periods of time. May be required to wear a respirator. Pull, push, and lift up to 50 lbs. On occasions, individuals may also be required to work in areas where high noise hazards prevail, thus requiring the use of adequate ear protection. Preferred Qualifications: Prefer at least two years of experience working rotary-wing aircraft. AS350 or B300 experience highly desired. Compensation The hourly rate for this position is $53.60. Benefits: Amentum offers the following benefits for this position, subject to applicable eligibility requirements: medical, dental and vision insurance, 401K retirement plan, life insurance, long term and short-term disability insurance, paid time off and parental leave. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Metrea is a defense company dedicated to translating commercial innovation into solutions for the hardest problems in national security. With deep mission expertise, Metrea focuses on delivering effects as-a-service across a spectrum of domains including Air & Space, Electromagnetic & Cyber, and Synthetic. Metrea Management provides central services to eleven (11) global capability units via Operations, Solutions, Strategy, Legal, and Finance teams. Capability Unit Metrea Strategic Mobility (MSM) operates a fleet of Boeing KC-135R aircraft, offering an air-to-air refueling service that seamlessly, safely, and professionally integrates into military aviation training and operations. Position Summary To perform this job successfully, an individual must be able to perform each essential duty listed below satisfactorily. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions. Work Location Metrea Strategic Mobility Flightline 17301 Heacock St Moreno Valley CA 92551 Role and Responsibilities * Inspect mechanical components of the Boeing KC-135 to identify discrepancies. * Maintain and repair all systems of the Boeing KC-135 to include: * Major / Minor aircraft inspections. * Hydraulics System - Replace hydraulic components, bleed systems, and diagnose discrepancies. * Jet Engine - Inspection, engine control rigging, and basic maintenance. * Electrics - Use wiring schematics, trace ground, and power faults, and rectify component failures. * Minor Fuel system repair, replace seals, in tank fuel probes and fuel system components is a plus, but not essential. * Minor Sheet Metal repair, including minor riveting is a plus, but not essential. * Aero Repair - Repair, replacement, and rigging of flight control surfaces is a plus, but not essential. * Multi Point Refueling System experience is a plus, but not essential. * CFM56 2-B / F108 jet engine experience is a plus, but not essential. * Avionics - Guidance & Control / Radio Communications experience is a plus, but not essential. * Perform daily aircraft inspections, launch/recover, refuel / defuel, debrief aircrew, troubleshoot, and repair discrepancies, jack aircraft, tow, and operate all required GSE (Ground Support Equipment). * Follow all safety directives, maintenance procedures, and FAA regulations Remain current on all required training and certifications * Accurately record aircraft maintenance in the automated maintenance records system. * Flight-line driving. * All duties assigned. Skills and Experience Education: * High School Diploma or equivalent Experience: * 5+ years working with heavy commercial aircraft or any military airframe. towing, jacking, and hazardous material use, storage, and disposal. * Must have A&P, IA, engine run qualified, and an ASTM NCATT Aircraft Electronic Technician Certificate. * Proven and demonstrable attention to detail skills. * Excellent problem-solving skills, determining causes of errors and deciding on the course of action to solve. * Comprehensive understanding of company philosophy and processes. * Must be able to take initiative and work independently. * Excellent communication skills, the ability to read and understand the information presented in writing, diagrams, and schematics. Computer Skills: * Basic skills in Microsoft Office Suite Programs Our Culture Metrea's single core value "rooted in humility" is supported by four key attributes; entrepreneurial, systematic, discerning & over-deliver which combined; form our Teammate Firmware, our culture. These attributes are explored during the hiring process, when we grow our teams and continually support the growth of our culture. We are a hyper-collaborative, dynamically hierarchical organization united by a passion for what we do, and how we do it, who we do it with, and who we do it for. Benefits Health and welfare. Retirement plan eligibility. Work Authorization / Security Clearance The employee must be a US citizen. The employee must be able to hold and maintain a Secret Clearance Level. AAP/EEO Statement Metrea Special Management LLC (MAM) is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law. Position Type and Expected Hours of Work This is a Part-time position with typical working hours of Monday through Friday, 7:00 a.m. to 4:00 p.m. Hours and work shifts may change in accordance with department and business needs. Non-exempt employees may be required to work over 40 hours per week with approval from the department manager. Part-time non-exempt employees must obtain approval from the department manager before working over 29 hours per week. Hours and work shifts may change by department and business needs. Significant travel is required to carry out assigned maintenance tasks and air operations successfully. Travel Travel requirements are: Up to 50% away from home. Work Environment This job operates in a clerical, office setting. This role routinely uses standard office equipment such as computers, phones, photocopiers, and filing cabinets. Physical Demands This position involves daily physical activity such as walking, lifting, reaching overhead Reasonable Accommodations Statement To perform this role successfully, an individual must be able to perform the responsibilities outlined in this to a satisfactory standard. Reasonable accommodations may be made to enable qualified individuals with additional needs to perform the essential functions. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. The role, responsibilities and activities may change at any time with or without notice.

Metrea is a defense company dedicated to translating commercial innovation into solutions for the hardest problems in national security. With deep mission expertise, Metrea focuses on delivering effects-as-a-service across Aerospace, Electromagnetic & Cyber, Digital & Synthetic domains via its capability groups. Metrea also consists of six support groups (Operations, People, Finance, Legal, Strategy and Solutions) that guide the development of specific capabilities that Metrea's files (product, projects, programs etc.) leverage to achieve their targets. Group Overview Air Mobility Group (AIRMOB) is responsible for developing and delivering Metrea's aerial refueling (AAR) capabilities, ensuring the readiness and operational effectiveness of the tanker fleet. AIRMOB oversees fleet management, maintenance, and airworthiness, working to sustain and enhance refueling operations. It manages the integration of new processes and technologies, ensuring that tanker aircraft remain mission-ready through effective logistics, maintenance oversight, and regulatory compliance. By coordinating across various teams, AIRMOB ensures the fleet meets both current and future operational needs, supporting a range of specialized air mobility missions. Position Summary The Aircraft Maintenance Mechanic is responsible for successfully performing all facets of maintenance and documentation on KC-135R aircraft for private, commercial, Air-to-Air Refueling Operations. The Aircraft Maintenance Mechanic is also responsible for daily aircraft inspections in accordance with the approved Air Mobility (AIRMOB) processes. Role and Responsibilities Inspect mechanical components of the KC-135 to identify problems. • Maintain and repair all systems of the KC-135 to include: Hydraulics System - Replace hydraulic components, bleed systems, and diagnose defects. Avionics - Guidance & Control / Radio Communications. Jet Engine - Inspection, engine control rigging, and basic maintenance. Electrics - Use wiring schematics, trace ground, and power faults, and rectify component failures. Minor Fuel system repair, replace seals, in tank fuel probes and fuel system components. Minor Sheet Metal repair, including minor riveting. Aero Repair - Repair, replacement, and rigging of flight control surfaces. Major / Minor aircraft inspections. Multi-Point Refueling System experience is a plus, but not essential. CFM56 2-B jet engine experience is a plus, but not essential. • Perform daily aircraft inspections, launch/recover, refuel / defuel, debrief aircrew, troubleshoot, and repair discrepancies, jack aircraft, tow, and operate all required GSE (Ground Support Equipment). • Follow all safety directives, maintenance procedures, and FAA regulations Remain current on all required training and certifications • Accurately record aircraft maintenance in the automated maintenance records system. • Flight-line driving • All other duties assigned Skills and Experience Education: High school diploma or equivalent Experience: 5+ years working with the KC-135 aircraft, towing, jacking, and hazardous material use, storage, and disposal. Computer Skills: Proficient in Microsoft Office Suite products (specifically Word and Excel) Certificates and Licenses: A&P - Required license. Engine run qualified, and an ASTM NCATT Aircraft Electronic Technician Certificate. Valid Driver's License. Valid Passport Additional Eligibility Qualifications Must be able to accomplish all duties with little or no assistance. Must have good command of the English language; oral and written. Proven and demonstrable attention to detail skills. Excellent problem-solving skills, having the ability to determine causes of errors and deciding on course of action to solve. Comprehensive understanding of company philosophy and processes. Must be able to take initiative and work independently. Excellent communication skills, the ability to read and understand information presented in writing. Our Firmware Metrea's single core value, “rooted in humility,” is supported by four key attributes: entrepreneurial, systematic, discerning, and over-deliver. These attributes, combined, form our Teammate Firmware, our culture. We explore these attributes during the hiring process when we grow our teams and continually support the growth of our culture. We are a hyper-collaborative, dynamically hierarchical organization united by a passion for what we do, how we do it, who we do it with, and who we do it for. Benefits Medical insurance options Dental and vision insurance Retirement plan eligibility Parental leave Work Authorization / Security Clearance Employee must be a US citizen. Secret Security Clearance or the ability to obtain within 1 year of employment start date is preferred, but not required. AAP/EEO Statement Metrea Strategic Mobility, LLC is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law. Position Type and Expected Hours of Work This is a full-time non-exempt position with typical working hours of Monday through Friday, 7:00 a.m. to 4:00 p.m. Hours and work shifts may change in accordance with department and business needs. Non-exempt employees may be required to work over 40 hours per week with approval from the department manager. Work Location Metrea Strategic Mobility 17301 Heacock Street Moreno Valley, CA 92551 Work Environment This job operates in a maintenance facility. This role routinely uses standard equipment such as cold chisels, ground power units for aircraft, integrated maintenance information systems, lifts, metal cutters, power drills, rivet tools, screwdrivers, wearable computing devices, and protective headsets/earplugs. Travel Travel requirements may be up to 50% with at least 60 consecutive days working in India.

Essential Duties And Responsibilities Other duties may be assigned. Perform all necessary aircraft inspections including, but not limited to: Annual; 100- hour; 50- hour; oil changes. Maintaining aircraft maintenance records per the Code of Federal Regulations for each aircraft. Ensuring all aircraft are airworthy and safe for flight after inspections/repairs. Handling all aircraft line squawks promptly. Be reachable by Supervisor or CBU staff should maintenance need arise. If a maintenance need arises, fly to a specific location to assist a student or flight instructor. Maintain a supply stock of parts as needed for the aircraft. Maintain A&P and IA FAA currency requirements. Make timely reports to the Director of Maintenance on aircraft status. Have maintenance records readily available upon FAA request.

TASK DESCRIPTION: Aircraft Mechanic I (23021): Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti- icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair. May be required to be licensed by Federal Aviation Administration. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Federal Aviation Administration (FAA) licensing of contractor employee technical proficiency is not required. TASK REQUIREMENTS: Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic, hydraulic, engines, auxiliary power unit, and ventilation and heating systems. Repair, replace, and rebuild aircraft structures, such as fuselage and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, rivet gun and drills. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Perform phase, scheduled, unscheduled, periodic, and other hourly or calendar inspections. Use chemical treatment process to etch and alodine parts. Use chemical sealants. Requisition repair parts, materials, and consumable supplies through military supply system ULLS-A (E). Lead and direct small maintenance teams. Perform other tasks as directed. PREFERRED QUALIFICATIONS: H-60 qualification and/or experience. Three to five years leadership experience. Eight or more years' rotary wing experience. Familiarity and ability to use Microsoft Office. Familiarity and ability to use military tech manuals. Familiarity and ability to use Standard Army Management Information Systems i.e. ULLS-A (E). BASIC QUALIFICATIONS: Must be a graduate of one of the following Military Aviation Powertrain and/or General Repair, Hydraulic, Engine, Avionics and Sheet Metal Qualification Courses or civilian equivalent. At least two years of experience on military rotorcraft. Must be able to work 1st, 2nd or 3rd shift schedule as required. Must be able to work flexible work-week schedules i.e. M-F, Tues-Sat, Sun-Th or as required. Must be able to pass a background check. Must be able to obtain a favorable National Agency Check. Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must have own tools. Must be able to deploy to support off station exercises and perform other support duties as assigned. Compensation $42.05/hour Other Compensation Employees receive a minimum health and welfare fringe rate of $3.75 or a Group Health Insurance Opt Out amount of $2.80 per hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, basic life insurance, and short term disability. Employees are able to enroll in KAI's 401k plan. Employees accrue 6.77 hours of PTO per bi-weekly pay period. KAI employees at ASF Los Alamitos have 13 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Before you apply to a job, select your language preference from the options available at the top right of this page. Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. Job Description: This position performs aircraft maintenance on UPS fleet to meet or exceed airworthiness standards. Performs the change, removal, replacement, or upgrade of aircraft components to correct failures or implement changes. Conducts troubleshooting of complex pneumatic, hydraulic, engine, and structural components and systems. This position documents procedures per established processes to ensure regulatory compliance. Job Responsibilities Responsible for the maintenance and preventive maintenance of aircraft Operate and maintain UPS equipment safely Run, taxi, and tow aircraft for the purpose of maintenance and repositioning of aircraft as trained and qualified to do so Determines airworthiness of aircraft and components, in accordance with established procedure and Federal Aviation Regulation Completes aircraft maintenance forms entries and enters data into a Maintenance Data Systems, ensures entries are accurate and complete Services and inspects aircraft, components, and related equipment Ensure consistent, accurate aircraft maintenance by properly completing turnover entries on unfinished maintenance in the turnover log Follow all Maintenance Department policies and procedures Keep a clean and orderly work environment Make recommendations to improve functions within the Maintenance Department Attend UPS assigned training Perform other duties as assigned by Line Maintenance Supervisor or the Director of Maintenance Required Qualifications Must have a High School Diploma or GED equivalent Must have a valid FAA Airframe and Powerplant license Must have a valid driver's license Must have a minimum of three (3) years aircraft maintenance experience that could include but not limited to: Boeing, Airbus and/or McDonnell Douglas aircraft Military jet aircraft Regional /Commuter aircraft Knowledge of computer systems Troubleshooting skills and ability to read and interpret Aircraft Manuals and Illustrated Parts Catalogues Federal Aviation Administration required Drug Testing Information (FAA): As part of the UPS pre-employment process for a safety sensitive position, a drug screen is required. UPS Must receive a negative test result before you can be put into a safety sensitive position (14 CFR Part 120.107). Please be advised that you will be tested in accordance with 14 CFR Part 120.109(a)(5) and 14 CFR 120 Subpart E to determine the presence of marijuana, cocaine, opiates (including codeine, heroin-6AM, morphine), opioids-hydrocodone, hydromorphone, oxycodone & oxymorphone, phencyclidine (PCP), and amphetamines/methamphetamines (including MDMA, MDA) or metabolites of these drugs. Starting Pay: $30.13 Benefits: Competitive weekly pay Medical, dental, and vision after waiting period Defined-benefit pension plan 401(k) Paid vacation Paid holidays Paid Sick and Family and Medical Leave time as required by law Discounted Employee Stock Purchase Program Employee Assistance Program *This job post is for BUR gateway only* Employee Type: Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. Basic Qualifications: Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer. Pay Range: For this union-represented posting, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. The starting pay rate for this position starts at $30.13/hr. The company offers the following benefits for this position, subject to applicable eligibility requirements. Weekly pay, extensive training, growth opportunities, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, education assistance program, discounted employee stock purchase program.

Ameriflight, LLC is the nation's largest Part 135 Cargo airline and the unparalleled leader in scalable, outsourced aviation services to the regional express airfreight market. We operate over 150 dedicated cargo aircraft, including the Saab 340B, Embraer 120, Fairchild SA227, Beechcraft 1900, and Beech 99 from bases across the United States. Benefits Ameriflight strives to provide our employees with a good work-life balance and are constantly working to improve our benefits * $24.50 - $42.50 per hour depending on experience and shift * Opportunity for growth and promotion * Medical, Dental, and Vision benefits * Company provided Life Insurance * 401K with company match * Vacation Basic Duties Ameriflight mechanics work on aircraft from nose to tail, which means they are able to gain unique expertise that cannot be found anywhere else. * Perform all manner of maintenance on company aircraft in accordance with company policy, manufacturer's recommendations and Federal Aviation Regulations. * Inspect, troubleshoot and repair airframe and powerplant components and systems * Document work completed per company procedures and Federal Aviation Regulations * Maintain a clean and safe work area * May travel for training, to repair aircraft in the field, and to provide temporary support for other bases * Other duties as assigned Experience * Previous experience with Beechcraft 99 and B1900, Embraer EMB-120, Fairchild SA227, Saab 340B aircraft is preferred * Previous experience with GE T700/CT7, PT6A, PW118 and TPE331 series powerplants preferred * Experience within a fast-paced, scheduled maintenance operation Requirements * Must hold a valid FAA Aircraft Mechanic certificate with Airframe & Powerplant ratings * Must be at least 18 years of age * Must be eligible to work in the U.S. without visa sponsorship * Must be able to read, write, speak, and understand English and be able to communicate effectively with other employees * Must be able to interpret documents such as policy, repair and safety manuals * Must meet airport badging requirements, including a TSA Security background check * Successful completion of pre-employment required DOT drug screening and other required background checks * Must have and maintain a valid Driver's License and meet all company insurance criteria * Must be able to work various shifts Physical Requirements * Frequently required to sit, stand, walk, use hands to manipulate objects, reach, climb, balance, stoop, kneel, crouch, or crawl * Must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 75 pounds * Ability to perform repetitive tasks Work Environment * May work outdoors, in weather as necessary * May work near moving aircraft and machinery * May work in a potentially noisy work environment We are proud to be an Equal Opportunity Employer. Employment decisions are based on merit, qualifications, and business needs without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

The Sheriff's Department is recruiting for Aviation Mechanics who perform skilled airframe and powerplant maintenance, repairs and modifications on fixed-wing and rotary-wing aircraft, participate in flight checks, ensure air worthiness, and maintain records, reports, and logs. For more detailed information, view the Sheriff's Aviation Mechanic job description. Inspection License Differential - $1.50/hour for hours worked for employees who possess a valid Federal Aviation Inspection License. Annual Tool Allowance - $650 Annual Boot Allowance - $150 On-Call Compensation As Needed - $4.00/hour EXCELLENT BENEFITS To review job-specific Benefits refer to: Summary of Benefits Memoranda of Understanding MOU CONDITIONS OF EMPLOYMENT 1) Background: Prior to appointment, applicants will be fingerprinted and must pass an extensive background investigation, including a polygraph examination. Applicants must not have been convicted of a felony. 2) Shift: Applicants must be available for all shifts; incumbents will be required to work rotating shifts, or be on call for work, on weekends, holidays, and evenings, including mandatory overtime; refusal of assigned shift may result in removal from the list or termination. 3) License: A valid California Class C Driver License is required to carry out the essential job-related functions of this position. Mileage reimbursement and proof of automobile liability insurance must be maintained. 4) Physical: Requires the following physical demands: frequently stoop, bend, crawl, and work on knees for up to thirty (30) minutes; frequently climb and work on ladders for as long as thirty (30) minutes; occasionally lift and/or move parts weighing up to fifty (50) pounds. 5) Tools: Aviation Mechanics must provide their own set of basic hand tools at the time of appointment; current annual tool allowance is $650. 6) Sponsorship: Please note San Bernardino County is not able to consider candidates who will require visa sponsorship at the time of application or in the future. Experience: One (1) year of experience in the maintenance and repair of helicopters or fixed wing turbo or turbine engine aircraft. * - AND -- License/Certificate: Must possess a current FAA Airframe and Powerplant license; indicate certificate number and expiration date on application under "Certificates and Licenses." An excellent candidate for this position will possess recent experience in the maintenance and repair of Bell 212, Bell 412 and UH-1H, Airbus H125 helicopters, as well as experience with fixed-wing, light single and twin-engine airplanes; factory trained experience is preferred. In addition, the ideal candidate will possess his/her own tools and be willing to work overtime, weekends, and holidays. Examination: There will be a competitive evaluation of qualifications based on a review of the Application and Supplemental Questionnaire. It is to your advantage to provide as much relevant and detailed work experience as possible, as resumes will not be reviewed in lieu of the application materials. Application Procedure: Applications will be reviewed and processed on a continuous basis. Interested applicants are encouraged to apply as soon as possible as this recruitment may close at any time. Resumes will not be accepted in lieu of the application and/or supplemental questionnaire. To ensure timely and successful submission of your online application, please allow ample time to complete and submit your application. Once your application has been successfully submitted you will receive an onscreen confirmation and an email. We recommend that you save and/or print these for your records. Please note, if you do not receive an onscreen confirmation and an email acknowledging our receipt of your application we have not received your application. If you need technical assistance, review the Government Jobs online application guide or contact their Toll-Free Applicant Support line at **************. Please note that Human Resources is not responsible for any issues or delays caused by your internet connection, computer, or browser when submitting an application. All communications regarding the selection process will be via email. Applicants are encouraged to check their e-mails frequently to obtain any correspondence associated with this recruitment. Please be sure the email provided on this application is always current; it is your responsibility to update your personal information. Update your Spam, Junk, Bulk and Firewall settings as needed to ensure that you receive all information pertaining to this recruitment. Equal Employment Opportunity (EEO) / Americans with Disabilities Act (ADA): San Bernardino County is an Equal Employment Opportunity (EEO) and Americans with Disabilities Act (ADA) compliant employer, dedicated to ensuring equal employment opportunities for all employees and applicants. ADA Accommodation: If you have a disability and require accommodations in the testing process, please follow this link to the Special Testing Accommodations Request Form to complete and submit your request within one week of the recruitment filing deadline. Veterans' Preference: Eligible veterans and their spouses or widows/widowers who are not current County employees may receive additional Veterans' Preference points. For details and instructions on how to request these points, please refer to the Veterans' Preference Policy. For more important details, review the links below: Guide to Completing a County Job Application Applicant Information and the County Employment Process

Our mission at Skyryse is nothing less than a new era in flight, where fatalities are nearly zero, piloting any aircraft is simple and safe, and the sky is accessible to all. SkyOS, our industry-first universal operating system for flight, provides any airplane or helicopter with a fly-by-wire flight management solution that significantly reduces the complexity of flying. Skyryse One, our first production aircraft powered by SkyOS, was unveiled in 2024 and features the simplest, safest, and most intuitive flight controls in general aviation. AIRFRAME & POWERPLANT MECHANIC- R66/R44 - HAWTHORNE, CA The A&P Mechanic at Skyryse will support all aircraft maintenance operations based out of our Hawthorne, CA facility. They will serve as the subject matter expert on our rotary-wing specifically the R66 and or R44, and experimental aircraft. The ideal candidate will support Skyryse by ensuring all maintenance follows FAA compliance guidelines and regulations. RESPONSIBILITIES: Execute scheduled and unscheduled maintenance on rotorcraft and experimental aircraft. Conduct detailed inspections and verifications of aircraft systems to confirm compliance with all safety, regulatory, and operational standards prior to flight. Maintain documentation and proper record keeping of repairs, maintenance, inspections, reports, and other items related to aircraft maintenance. Interpret and apply maintenance manuals, engineering specifications, and technical data to perform precise repairs and component replacements. Collaborate with technicians, pilots, engineers, and other team members to carry out modification and repair. Support fleet upgrades and new technology integration, contributing to the ongoing evolution of aircraft systems and safety enhancements. Perform other duties as required in support of flight operations and organizational objectives. MINIMUM QUALIFICATIONS: High School Diploma or GED Helicopter maintenance experience 5+ years of experience supporting the maintenance of aircraft FAA A&P Certification PREFERRED QUALIFICATIONS: Trade school or military training in aircraft maintenance Robinson maintenance course FAA inspection authorization certification 8+ years of experience supporting the maintenance of aircraft Avionics and wiring experience WHY SKYRYSE? The opportunity to change the world through improving aviation safety and accessibility Hourly Rate: 2-5yrs experience: $30-$42/hr. 5+yrs experience: $35-$58/hr. Valuable stock option plan Heavily subsidized medical, dental and vision plans Full-time employees are eligible for 20 days of paid time off (PTO) and 5 sick days annually. PTO and sick days must be used in accordance with Company policy. A company with an ambitious vision, a dynamic work environment, and a team of smart, motivated, and fun to work-with colleagues! The posted salary range reflects the potential base pay for this role, adjusted to account for varying geographic markets. Final compensation will be based on factors such as your location, job-related skills, experience, and internal alignment, including equity and benefits. WE WELCOME ALL Skyryse is an equal opportunity employer. We value diversity. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. NO AGENCY CANDIDATES WILL BE CONSIDERED.

This Is How We Fly At JSX, we're not just a lifestyle carrier - we're a lifestyle employer. Here, entrepreneurship meets determination, and excellence is our standard. We believe that the journey is just as important as the destination, and every day, we strive to create a Joyful, Simple eXperience for our Customers. Join us, and find your runway to growth, innovation, and success. About the Role: As an Aircraft Maintenance Technician, you play a critical role in ensuring the safety, reliability, and performance of our aircraft fleet. You will be responsible for performing both scheduled and unscheduled maintenance in full compliance with FAA regulations, company policies, and manufacturer maintenance manuals. Your work directly supports our mission to provide safe and efficient air travel while maintaining the highest standards of operational excellence. A Day in the Life: Your day will be dynamic and hands-on, centered around ensuring every aircraft is flight-ready and impeccably maintained. Typical responsibilities include: Pre-Flight Inspections: Start your day by “waking up” the aircraft, conducting thorough pre-flight checks to ensure all systems are fully operational before takeoff. Post-Flight Inspections: After each flight, you will perform detailed post-flight evaluations to identify and address any issues or wear that may have occurred. Maintenance Logging: All maintenance activities-whether scheduled or unscheduled-are documented in Traxxall and properly signed off in aircraft logbooks, ensuring full traceability and compliance. Hangar Maintenance: You'll help maintain a clean, organized, and safe working environment in the hangar. Why You'll Love This Role: Be Part of a Team That Values You: Join a tight-knit, supportive team of professionals who are passionate about aviation and committed to safety and excellence. No Two Days Are the Same: From troubleshooting to routine checks, you'll enjoy a fast-paced, engaging work environment. Make a Tangible Impact: Your attention to detail and technical expertise directly contribute to flight safety and an exceptional Customer experience. Opportunities to Grow: We're invested in your long-term success, offering ongoing training, certifications, and a clear path to advance your career. What Makes a Successful Aircraft Maintenance Technician? We're looking for someone who is: Critical Thinker: You can quickly assess situations and make sound, safety-first decisions. Detail-Oriented: You understand that precision matters - especially when it comes to aircraft performance. Collaborative: You work well across departments, valuing communication and teamwork to achieve common goals. Organized: You can effectively manage tasks and prioritize under tight timelines without missing a step. Proactive: You don't just react - you anticipate issues and take the initiative to address them before they escalate. Entrepreneurial Spirit: You bring energy, ownership, and creativity to your role, always looking for ways to improve processes and elevate the Customer experience. Required Experience: High school diploma/GED Ability to occasionally lift 75+ pounds Ability to perform intermittent physical activity including bending, reaching, and prolonged periods of standing. Available to work flexible shifts including early mornings, late nights, holidays, and weekends. Participation in initial and random drug and alcohol screenings in accordance with the DOT and FAA guidelines. Ability to operate forklift, boom lift, scissor lift, etc. Ability to taxi and engine run an airplane. Must procure own tool set. Preferred Experience: Prior aircraft maintenance experience. Experience working with AMM, IPC, FIM, etc. for troubleshooting references. Skills, Licenses, & Certifications: Current and valid Driver's license required. Current and valid Airframe and Powerplant Certificate required. Ability to operate in time critical situation with strong attention to detail. Pay & Perks: Compensation is $37-$52/hour. This was established after performing market research and is aligned with our approach to compensation. Health Benefits: New Crewmember's become eligible for coverage on the 1st of the month following the start date, with medical plans beginning at just $110/month. 100% employer paid dental & vision, plus up to $2,100 annually for HSA contribution. Short-term and long-term disability coverage at no cost. Travel Benefits: Enjoy free non-revenue standby travel on JSX, plus deeply discounted standby travel other major domestic & international airlines for you and your qualifying immediate family. 401(k) match: 50% of your first 8% Generous PTO: Take time to recharge with our flexible PTO plan. Additional Information: May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (emergencies, changes in workload, rush jobs, technical developments, etc). JSX seeks to provide equality of opportunity in all aspects of employment, as well as to ensure that all personnel activities, such as the recruitment, selection, training, compensation, benefits, discipline, promotion, transfer, layoff and termination processes remain free of illegal discrimination and harassment based upon race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, disability status, or any other characteristic protected by law. Ready to soar with us? Join JSX, where every day is a chance to be part of something eXtraordinary!

Los Angles, CA Area United States Compensation: Up to $55/hour + Sign-on bonus available Our client is currently seeking an experienced Aircraft Maintenance Technician with strong troubleshooting skills. The Aircraft Maintenance Technician reports to the Aircraft Maintenance Supervisor and is responsible for the efficient execution of the work scope and for the maintenance, preventive maintenance, and alterations performed. 2 - 5+ years of Corporate/Business Jet experience required ** CLIENT IS CURRENTLY ACCEPTING CANDIDATES WITH OVER 6 MONTHS OF EXPERIENCE WORKING ON CORPORATE JET LINES OF AIRCRAFT ** Key Requirement: Must have maintenance experience on one or more of the following brands of aircrafts (corporate jet lines of aircraft only): Gulfstream, Dassault, Learjet, Bombardier, Cessna Hiring for 3 openings: 1 for day shift, 1 for swing shift and another one for weekend shift. Morning Shift [Monday through Friday] Swing Shift [2pm to 11pm Monday through Friday] Weekend Shift [10 hours shift - Friday through Monday] Skills and Abilities Able to effectively communicate with management, peers, and external parties Ability to prioritize and organize workflow Excellent verbal and written communication skills Able to multi-task Known for working well with all levels of managers, staff, clients, and vendors Able to handle sensitive documents in a very confidential manner Responsibilities Performs maintenance and alteration of articles as directed Uses current, applicable technical data Adheres to all company and OSHA regulated policies and procedures Maintains outstanding attendance record Adheres and promotes the Clay Lacy Vision, Mission and Values daily Maintain proficiency with tools, techniques, and acceptable practices used to perform maintenance and alteration duties. Documenting all work performed including references to technical data used on work order squawk form and other forms as required Documenting all parts and/or equipment removed from or installed on aircraft on the removal and installation forms Ensuring material has been properly received prior to installation on aircraft Verify material shelf life has not expired prior to use Verify calibrated tooling calibration due date and condition prior to use Document identified discrepancies on Discrepancy Collection Form Do not deviate from technical data unless appropriate approvals are obtained Promote an efficient and professional work Participates in Continuous Improvement projects as directed Needs to be available to work different shifts and weekends as requested Able to travel away from the primary facility for training and work Perform other duties as assigned Education A&P Certificate required Experience 2 - 5+ years of Corporate/Business Jet experience Equal Opportunity Employer In compliance with the Americans with Disabilities Act, the company provides reasonable accommodation to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer. All applicants must submit to a pre-employment drug screen and background check. Client offers an excellent benefits package including medical, dental, vision, matching 401(K) and more to employees in full-time positions.

FIRE DEPARTMENT TYPE OF RECRUITMENT OPEN COMPETITIVE - FIRE EMERGENCY EXAM NUMBER 37492A-FR APPLICATION FILING PERIOD Applications will be accepted from Wednesday, December 3, 2025 at 8:00 AM (PT) until Tuesday, December 16, 2025 before 5:00 PM (PT). All applications must be received before 5:00 PM (PT) on December 16, 2025 before 5:00 PM (PT), to be accepted. The LA County Board of Supervisors has unanimously ratified a Proclamation of Local Emergency in response to the windstorms and wildfires, including the Palisades and Eaton Fires, that have devastated communities across the County. We are looking for qualified and passionate individuals to assist the County in mobilizing resources and support needed to help our residents recover and rebuild. If you are looking for a new career that will directly benefit the population of LA County, this may be the opportunity for you. The Los Angeles County Fire Department is seeking qualified candidates to fill emergency Helicopter Mechanic vacancies related to this unprecedented natural disaster. Under the emergency order, applicants who meet the requirements may be hired for an initial period of up to 90 days, with an opportunity for permanent County employment. During your initial work period, you will be assessed on your work performance. This assessment will be weighted 100%. Those who successfully pass the assessment will be considered for permanent appointment to Helicopter Mechanic position. Gathers and interprets information from a variety of sources (e.g., pilots, manufacturers' maintenance manuals, wiring diagrams, illustrated parts breakdown, test results, Technical Bulletins, etc.) by asking questions, reading, conducting tests, and performing in-flight duties etc. in order to troubleshoot, guide inspection and perform maintenance repairs. Performs daily, periodic, hourly, and other inspections as required by manufacturers, Federal Aviation Regulations (FARs), and/or County policy to determine airworthiness of helicopters, serviceability of aircraft appliances, and to identify problems or potential problems. Troubleshoots electrical, mechanical, hydraulic, and structural problems on helicopters using visual inspection techniques and a variety of test equipment (e.g., volt-ohm meter, pressure gauges, computer diagnostic equipment, etc.) in order to locate the source of problems and determine what corrective actions are needed (e.g., adjustments, repairs, replacement of parts, etc.). Repairs, removes and replaces defective parts, overhauling parts, fabricating parts, etc. using a variety of handheld, hydraulic, and power tools and equipment (e.g., pullers, wrenches, dead-blow hammers, etc.) in order to make the aircraft or component airworthy and return it to service. Cleans, using brushes, rags/towels, hoses, stepladders, soaps and solvents, etc. in order to facilitate visual inspection of the aircraft, prevent corrosion, and to give the aircraft a clean, professional, and well-maintained appearance. Writes reports, completes forms, and makes logbook entries (e.g., brief written reports, inspection checklists, maintenance logs, work orders, etc.) by hand and/or using a computer word processing and/or email application in order to document the performance of scheduled maintenance, report issues or problems, provide information to others (e.g., supervisors, coworkers, pilots, etc.), and to be in compliance with manufacturers guidance, Federal Aviation Regulations (FARs), and/or County policy.REQUIREMENTS TO QUALIFY: Three years' (full-time) experience, gained within the last five years, in the repair and maintenance of twin engine turbine-powered helicopters such as the Bell 412 and/or Sikorsky UH60/70. One year of the required experience must have been in: Responsible charge of repairs and overhauls to return "certified" helicopters to flight status in compliance with Federal Aviation Administration Regulations and manufacturer requirements -or- Responsible charge of repairs and overhauls to return "non-certified" helicopters to flight status in compliance with manufacturer requirements in either a Department of Defense/U.S. Military or private contractor environment. REQUIRED CERTIFICATE: A current valid Airframe and Power Plant Mechanic's certificate issued by the Federal Aviation Administration (FAA)*. You MUST meet the above requirement(s) in order to be appointed to fill any vacancies related to this recruitment. LICENSE: A valid California Class C Driver License or the ability to utilize an alternative method of transportation when needed to carry out job-related essential functions. * License and Certification Information The exam analyst will verify the required certification on the Federal Aviation Administration (FAA) website. You must include a copy of your certificate within five (5) days of filing your application. If you are unable to attach the required documents, please e-mail them to ***************************************** within five (5) business days of filing. Include the exam number, and exam title in the Subject line of your e-mail. We do not accept password-protected documents. Ensure documents are unlocked before attaching to your application or sending to the exam analyst. PHYSICAL CLASS: IV - Arduous: This class involves frequent heavy lifting over 25 pounds, often combined with bending, twisting, or working above ground on irregular surfaces. It includes those positions that occasionally demand extraordinary physical activity such as those in Safety positions. EXAMINATION CONTENT: During your initial work period, the appointing department will evaluate your performance. Those who achieve a passing score on this evaluation will be considered for permanent appointment. APPLICATION & FILING INFORMATION: Applications must be filed online only and will be reviewed for interview consideration on an ongoing basis. If you have not been contacted within 60 days and the recruitment remains open or reopens for filing, we encourage you to submit a new application. This will allow you to reaffirm your interest and update any relevant information. Many important notifications will be sent electronically to the email address provided on the application, so it is important that you provide a valid email address. Please add *****************************, noreply@governmentjobs.com, and *********************** to your email address and list of approved senders to prevent email notifications from being filtered as spam/junk/clutter mail. You have the ability to opt out of emails from LA County. If you unsubscribe, you will not receive any email notification for any examination for which you apply with Los Angeles County. Regardless of whether you choose to unsubscribe, you can always check for notifications by logging into governmentjobs.com and viewing your profile inbox, which saves a copy of all emailed notices. Plan to submit your online application well in advance before the posting closes as you may be required to verify your email address. This only needs to be done once per email address, and if you already have a job seeker account on **************************************** you can verify at any time by logging in and following the prompts. This is to enhance the security of your online application and to ensure you do not enter an incorrect email address. AVAILABLE SHIFT: Any Shift - Appointees must be willing to work any shift, including evenings, nights, weekends, and holidays. NO SHARING OF USER ID, EMAIL AND PASSWORD: All applicants must file their application using their own user ID and password. Using a family member's or friend's user ID and password may erase a candidate's original application record. Department Contact Name: Fire Examination Section Department Contact Phone: ************** Department Contact Email: ********************************** Teletype Phone: **************

Impact Recruitment is looking for a talented, motivated, and driven Aircraft Maintenance Technician/ Lead for a stable and well respected client with locations in Southern California. This position will focus on a variety of corporate jet aircraft; including, but not limited to: Dassault (Falcon), Gulfstream, Bombardier (Global/Challenger), Hawker, and Cessna (Citation). Focused on creating inspired careers, our client offers excellent opportunities for career growth and professional development within their organization. Key Responsibilities: Supervises a crew of technicians (5 - 12 crew members) in the performance of aircraft maintenance. Evaluates, recommends salary and promotions, rewards, recognizes and disciplines members of the crew. Assures that technicians are held accountable for the quality of their maintenance work, and that they perform their duties in accordance with FAA regulations, manufacturers' recommendations, the company repair station manual, as well as company policies and procedures. Assigns work to crew members based upon customer expectations for return to service date and the technical expertise of the various employees. Provides technical guidance to technicians to aid in performance of aircraft maintenance, service bulletins, airworthiness directives, and modifications. Must be up-to-date on scope of required maintenance for customers and coordinate efforts to ensure an on time delivery. With the facility general manager, pre-plans work scopes on aircraft, including deploying manpower, pre-ordering parts, opening the work order and customer debriefing. Writes all additional items and squawks communicated by customer or identified during inspection. Monitors hours charged to a job to assure that manpower is optimized and efficiency is maintained to meet or exceed customers expectations. Reviews employee time cards on a daily basis to verify accuracy of time charged to work orders as well as performance relative to quoted hours. Informs facility general manager of problems and work status so that communications with the customers are timely and complete. Reviews work orders for completion and invoice for accuracy prior to submission to the general manager. Ensures work orders are in accordance with our repair station manual, including RTS functions. Ensures completion of a final “walk around” to confirm aircraft cleanliness and readiness for departure. Assures that crew members are well-trained on assigned aircraft, that they are scheduled for periodic technical training in-house or at designated off-site locations. Works cooperatively with other TAC personnel to assure cross-training on other aircraft models. Supports and adheres to safety, environmental and general housekeeping policies. Is proactive in the area of safety; promotes safe work habits to the crew, monitors the work environment for safety hazards and takes steps to address/remove hazards. Ensures the proper use and maintenance of company facilities and equipment ensuring accuracy and safety. Education and Experience Required: A minimum of 10 years recent experience working on corporate aircraft models typical to the company. A minimum of 2 years recent experience in a supervisory role. Valid Airframe and Powerplant (A&P) license issued by the FAA. Valid California Driver's License. We invite you to consider a career opportunity through Impact Recruitment. Contact us today at ************************** or ************** to learn more about this position and to see whether this is the right career fit for you! Impact Recruitment is an equal opportunity employer. Impact Recruitment does not discriminate in recruitment, hiring, or terms or conditions of employment on the basis of race, sex, color, national origin, sexual orientation, religion, age, disability, medical condition as defined under state law, or any other basis prohibited by applicable federal, state, or local law. Impact Recruitment also provides reasonable accommodations to disabled individuals to assist in the hiring process and to qualified individuals with disabilities in the performance of essential job functions, as required by federal, state, or local law.

Energy: Forget about blending in. That's not our style. We're the risk takers, the trailblazers, the game-changers. We're not perfect and we don't pretend to be. We're raw, unfiltered, and a bit unconventional. Our drive is just like our athletes, unrivaled. The power is in your hands to define what success looks like and where you want to take your career. It's not just about what we do, but about who we become on along the way. We are much more than a brand here. We are a way of life, a mindset. Join us. A Day in the Life: As a Production Line Mechanic at Monster Energy, you'll be the driving force behind our high-octane production process. Your role is to maintain and repair our cutting-edge machinery and equipment, ensuring they roar to life in line with our dynamic manufacturing procedures. Your mission: achieve peak efficiency, deliver top-tier quality, and power through to meet our ultimate production goals. Get ready to unleash your potential and keep the Monster Energy flowing! The Impact You'll Make: Conduct routine maintenance checks on machines and equipment used in production. Install, diagnose, analyze, maintain, modify, repair, and/or rebuild a variety of plant and facility equipment. Perform preventive maintenance tasks, such as checking, cleaning, or repairing equipment to detect and prevent problems to ensure that machines continue to run smoothly and operate efficiently; basic electrical equipment problems such as changing fuses, buttons, and switches. Contribute significantly to the manufacturing process by ensuring product quality, safety, and efficient operations. Commit to safety and GMP (Good Manufacturing Practices). Examine manufactured products and identify faults or defects. Paying attention to details and practicing analytical techniques help improve productivity. Maintain accurate documentation for assignments, machine repairs, parts inventory, and maintenance logs. Assist production personnel in change-overs and set-ups. Provide consultation on correct maintenance and preventative measures to machine users. Utilize specific knowledge for a variety of skilled trades, including but not limited to, production and facility machinery and equipment, HVAC, plumbing, electrical, pipefitting, carpentry, utilities, etc. Who You Are: Prefer a technical degree or license in mechanical maintenance or related field of study. Additional Experience Desired: Between 1-3 years of experience in performing preventive maintenance, diagnostics, and repair. Computer Skills Desired: Microsoft Office ability to modify basic reports, documents, and spreadsheets in Word and Excel. Preferred Certifications: Electrical or mechanical engineering trade school. Monster Energy provides competitive total compensation. This position has an annual estimated salary of $27.00 -$36.00 per hour. The actual pay may vary depending on your skills, qualifications, experience, and work location.

Description: HYDRAULIC / WET KIT INSTALLS DIESEL MECHANIC Department: Fleet & Maintenance Classification: Full-Time, Non-exempt Reports To Fleet & Maintenance Director Position Summary Ecology Auto Parts, Inc. is currently seeking a skilled Diesel Mechanic (Level 2) with strong hydraulic systems experience, specifically in wet kit installations for PTOs (Power Take-Off units). The ideal candidate will demonstrate technical proficiency in diesel engine systems, hydraulic setups, troubleshooting, and safety standards in heavy-duty fleet environments. This role is essential to supporting Ecology's diverse fleet of trucks and trailers to ensure uptime, safety, and operational excellence. Responsibilities To perform this job successfully you must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. Perform professional installation of wet kits, hydraulic pumps, tanks, lines, valves, and PTO systems on Class 8 diesel trucks. Conduct diagnostics and repairs on hydraulic and pneumatic systems, including troubleshooting leaks, pressure failures, and mechanical malfunctions. Service, inspect, and maintain diesel engines, transmissions, brakes, suspensions, and electrical components in accordance with OEM standards. Collaborate with senior mechanics and management on build specifications and install configurations for various truck body applications. Ensure all hydraulic and mechanical work is completed to DOT safety standards and manufacturer guidelines. Maintain proper documentation of work orders, parts usage, and service notes in the maintenance system. Use hand tools, diagnostic software, welding equipment, and hydraulic testing gauges as necessary for repairs and installs. Monitor inventory of hydraulic parts and recommend restocking when needed. Support other maintenance operations including preventative service, emergency repairs, and inspections as assigned. Participate in safety meetings, training programs, and toolbox talks to promote a safe and compliant working environment. Requirements: Qualifications/Knowledge/Critical Skills · High school diploma or GED required; technical/vocational school certification preferred. · Minimum 3+ years of experience as a diesel mechanic, with at least 1 year specializing in hydraulic systems and wet kit installs. · Knowledge of PTO systems, hydraulic pump setups, tank configurations, and control mechanisms. · Must have own tools and experience using diagnostic equipment and power tools. · Working knowledge of diesel engine systems (Cummins, CAT, Detroit, etc.), DEF systems, electrical diagnostics, and air brake systems. · Ability to read and interpret technical manuals, wiring diagrams, and hydraulic schematics. · Proficient with Microsoft Office and Fleet Maintenance software is a plus. · Must hold a valid driver's license; Class A or B license preferred but not required. · Ability to work independently and manage time effectively in a fast-paced shop environment. Physical Demands/Environmental Factors · While performing the duties of this job, the employee is regularly required to stand, bend, kneel, crawl, and lift tools or parts. · Must frequently lift and/or move up to 75 pounds. · Work involves exposure to dust, noise, grease, and diesel fumes. · May be required to work outdoors in varying weather conditions. · Must adhere to all company safety protocols including PPE usage and equipment lockout/tagout procedures. Compensation The Diesel Mechanic (Level 2) position offers an appealing compensation package, with a competitive hourly wage range of $25.00 to $37.00 per hour (DOE). In addition to the financial components, we provide a comprehensive benefits package, including medical, dental, and vision insurance, a 401k plan with employer matching, generous paid time off, and life insurance coverage. The final compensation will be contingent upon the candidate's relevant experience, qualifications, and skills, reflecting our commitment to providing a rewarding and competitive remuneration to attract top talent in the industry. PLEASE NOTE: This job description is not exhaustive and is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Ecology Auto Parts Inc. is committed to providing a workplace and culture of respect, diversity, equity, inclusion, and belonging. We are dedicated to ensuring equal employment opportunity without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. Should you have a disability or specific needs requiring accommodation, please inform us. Thank you for your interest in opportunities with Ecology Auto Parts, Inc. We appreciate the enthusiasm and professionalism demonstrated by individuals seeking to join our team. Please be advised that Ecology Auto Parts, Inc. does not engage with or entertain solicitations from third-party recruiting firms for our hiring needs. We have a dedicated internal recruitment team managing our talent acquisition process. We kindly request that third-party recruitment firms refrain from submitting candidates for our open positions. Ecology Auto Parts, Inc. will not consider or entertain candidates represented by headhunter agencies for our current requisitions. Our commitment to fair and equitable hiring practices includes working directly with candidates who apply through our official channels. We believe in fostering a transparent and direct relationship with potential team members. We appreciate your understanding and compliance with this policy. If you are interested in joining Ecology Auto Parts, Inc., please visit our official careers page here: EAP, Inc. | Career Center for a list of our current job opportunities and application instructions.

General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We have an exciting opportunity for an A&P Mechanic supporting Test Operations at our Flight Operations Facilities located at either Gray Butte (Palmdale) or El Mirage (Adelanto) in sunny Southern California. In this role you will be working on cutting edge technology utilizing your experience to further the development of new hardware and software, adding new capabilities to airborne sensing and weapons systems, and sustainment of customer fleets including MQ-1C Gray Eagle, MQ-9A Reaper, and MQ-9B SkyGuardian, SeaGuardian, and Protector systems. Responsible for the entire Unmanned Aircraft System, you will be modifying and configuring aircraft and ground control stations to meet customer specified test programs, executing ground tests, and supporting flight test activities. This includes flightline activities such as preflight, launch and recovery, and postflight data collection. DUTIES AND RESPONSIBILITIES: The successful candidate will service, troubleshoot, repair, inspect, and maintain aircraft and ground support equipment in support of test operations and sustainment activities in accordance with maintenance documentation. Support test teams for test and development (R&D) efforts. Performs work on airframe and powerplant in support of test operations and sustainment activities. Troubleshoot aircraft and engine systems to determine related problems to identify possible solutions. Develops and reviews new processes and procedures. Will assist in training efforts for various customers. Perform scheduled and unscheduled maintenance. Inspect powerplant and related components at regular intervals adhering to company approved procedures, maintenance manuals, and/or government technical order requirements. Review records to ensure all required documentation is completed in accordance with established company procedures for government and customer technical order requirements. Perform all launch and recovery tasks of aircraft to include ground operations, pre and postflight items, ground observer responsibilities, and inspect, test, maintain and operate ground support equipment. Expected to maintain a productive and safe working environment in accordance with established operating procedures and practices. Other duties as assigned or required We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply. Typically requires a high school diploma or equivalent and two or more years of aircraft mechanical maintenance experience. An FAA Airframe and Powerplant License is desired. Ability to obtain and maintain DOD SEC clearance is required. Must possess: General knowledge and understanding of the detailed aspects of the job Knowledge of relevant computer applications and operations Basic leadership, organization and planning skills Good analytical, interpersonal, verbal and written communication skills to accurately document, report and assess situations and make judgments. The ability to work both independently and in a team environment is essential. The ability to work any shift and additional hours as required.

Qualifications: Must have a minimum of 5 years experience in the cosmetics, food or pharmaceutical industry Must focus on maintenance manager expectations, prevent problems and strive towards continuous improvement Excellent written and verbal communication skills Able to work with minimal supervision Must have own tools Bilingual English/Spanish helpful but not mandatory Must be able to work any shift and overtime Responsibilities: General maintenance duties such as replacing valves and pumps, motors, gear reducers. Experience with equipment packaging equipment (labelers, rotary and in-line filler, in-line cappers, jet printers, cartoner's, bundlers, sleevers, heat tunnels and case sealers) Disassembly and assembly of electric motors, pumps, hydraulic and pneumatic systems Repair machinery and conveyor belts Basic electrical knowledge Maintains technical and professional knowledge Perform miscellaneous duties as required for plant maintenance Basic machinist experience using lathe and mill is a plus Salary Range: $30 - $35/hr

Job DescriptionWe are seeking a highly skilled and motivated B1 Licensed Aircraft Engineer to join our team. In this role, you will be responsible for ensuring the safety, airworthiness, and operational readiness of aircraft. As a B1 Licensed Aircraft Engineer, you will work closely with a team of engineers and technicians, providing technical expertise for the maintenance and repair of aircraft systems, including the structure, engines, and mechanical systems. Your key responsibilities will include troubleshooting, performing routine maintenance, and conducting complex inspections to meet both regulatory standards and our operational excellence. If you are a detail-oriented professional with a passion for aviation, this position offers an exciting opportunity to work in a fast-paced, dynamic environment.Key Responsibilities: Perform scheduled and unscheduled maintenance tasks on aircraft in accordance with company and regulatory guidelines. Troubleshoot and repair aircraft systems, including hydraulic, pneumatic, and mechanical components. Conduct pre-flight and post-flight inspections to ensure aircraft safety and compliance. Diagnose issues and determine the necessary course of action for repairs or replacements. Complete maintenance logs and reports accurately to document all work performed. Work closely with flight crews to ensure the timely and safe return of aircraft to service. Ensure that all tools, equipment, and facilities used in maintenance are kept in good condition and properly calibrated. Supervise and mentor junior maintenance staff and technicians. Liaise with regulatory authorities during inspections and audits. Stay updated on industry regulations and technology advancements. Qualifications: Valid EASA Part 66 B1 License (or equivalent recognized by local aviation authorities). Strong knowledge of aircraft systems, including engines, landing gear, airframes, and associated mechanical and hydraulic systems. Minimum of 3 years of experience working on aircraft maintenance, repairs, or modifications. Experience with both scheduled and unscheduled maintenance. Ability to read and interpret technical manuals, blueprints, and engineering drawings. Excellent troubleshooting and problem-solving skills. Strong attention to detail and commitment to safety. Ability to work in a fast-paced environment with minimal supervision. Excellent communication skills and ability to work as part of a team. Preferred Qualifications: EASA Part 66 B1 License or equivalent qualification (e.g., FAA A&P License, CAA B1 License). Aircraft Type Ratings on relevant aircraft models (e.g., Airbus, Boeing, Bombardier, etc.). Valid Human Factors certification. Current EWIS (Electrical Wiring Interconnection System) certificate. Fuel Tank Safety certification (Level 1 and 2 preferred). Updated training on relevant regulations (Part 145, Part M, etc.). Type ratings on multiple aircraft types. Experience in both line and base maintenance environments. Certification in advanced aircraft systems troubleshooting techniques. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

We are seeking a highly skilled and motivated B1 Licensed Aircraft Engineer to join our team. In this role, you will be responsible for ensuring the safety, airworthiness, and operational readiness of aircraft. As a B1 Licensed Aircraft Engineer, you will work closely with a team of engineers and technicians, providing technical expertise for the maintenance and repair of aircraft systems, including the structure, engines, and mechanical systems. Your key responsibilities will include troubleshooting, performing routine maintenance, and conducting complex inspections to meet both regulatory standards and our operational excellence. If you are a detail-oriented professional with a passion for aviation, this position offers an exciting opportunity to work in a fast-paced, dynamic environment.Key Responsibilities: Perform scheduled and unscheduled maintenance tasks on aircraft in accordance with company and regulatory guidelines. Troubleshoot and repair aircraft systems, including hydraulic, pneumatic, and mechanical components. Conduct pre-flight and post-flight inspections to ensure aircraft safety and compliance. Diagnose issues and determine the necessary course of action for repairs or replacements. Complete maintenance logs and reports accurately to document all work performed. Work closely with flight crews to ensure the timely and safe return of aircraft to service. Ensure that all tools, equipment, and facilities used in maintenance are kept in good condition and properly calibrated. Supervise and mentor junior maintenance staff and technicians. Liaise with regulatory authorities during inspections and audits. Stay updated on industry regulations and technology advancements. Qualifications: Valid EASA Part 66 B1 License (or equivalent recognized by local aviation authorities). Strong knowledge of aircraft systems, including engines, landing gear, airframes, and associated mechanical and hydraulic systems. Minimum of 3 years of experience working on aircraft maintenance, repairs, or modifications. Experience with both scheduled and unscheduled maintenance. Ability to read and interpret technical manuals, blueprints, and engineering drawings. Excellent troubleshooting and problem-solving skills. Strong attention to detail and commitment to safety. Ability to work in a fast-paced environment with minimal supervision. Excellent communication skills and ability to work as part of a team. Preferred Qualifications: EASA Part 66 B1 License or equivalent qualification (e.g., FAA A&P License, CAA B1 License). Aircraft Type Ratings on relevant aircraft models (e.g., Airbus, Boeing, Bombardier, etc.). Valid Human Factors certification. Current EWIS (Electrical Wiring Interconnection System) certificate. Fuel Tank Safety certification (Level 1 and 2 preferred). Updated training on relevant regulations (Part 145, Part M, etc.). Type ratings on multiple aircraft types. Experience in both line and base maintenance environments. Certification in advanced aircraft systems troubleshooting techniques.