Aircraft mechanic jobs in El Paso, TX - 944 jobs

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic (SAM-UPT-0474) Job Posting No 113732 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date 11/24/2025 Contract Sheppard Aircraft Maintenance Salary Range $44.14 Hour Posting Date 11/ 05/2025 Union Yes FLSA Status Non-Exempt Shift Work 3rd FT/PT Full-time Relocation No Travel Possible Job Summary: M1 is looking for an Aircraft Mechanic with the following knowledge and experience: Primary responsibilities include but are not limited to the following: * Uses schematic diagrams, drawings, charts and technical publication in operating, testing removing, troubleshooting and replacing aircraft system components to include remove and install engines as required. * Complies with the requirements of the FOD prevention, housekeeping, tool control, environmental and safety programs. * Performs aircraft conditional inspections. * Performs all required aircraft servicing tasks. * Operates ground support equipment and documents/reports discrepancies prior to use. * Performs all tasks associated with ground movement of aircraft. * Completes all necessary manual and automated records required by USAF and Company directives. * Orders parts and supplies as needed. * Follows technical data, manuals, regulations, and other maintenance directives as required. * Performs other related duties as assigned. * Participates in towing and movement of aircraft in performing maintenance activities. Qualifications and Experience: Knowledge: * A working knowledge of jet aircraft systems and of the use of common aircraft hand tools and special tools is required. A working knowledge of aircraft maintenance safety requirements and the operation of portable fire- fighting equipment are required. Education: * Completion of high school or the equivalent is required. Completion of specialized courses is desired. * The ability to read and write and to comprehend technical data is required. Experience: * Eighteen (18) months of general aircraft maintenance experience is required. One (1) year experience in the past three (3) calendar years' on applicable aircraft or completion of a specific aircraft familiarization course is required. * Possession of a valid driver's license is necessary to obtain flight line driving privileges Page 2 of 2 Working Conditions: * Environment ranges from office to hangar and flight line and requires extensive climbing, standing, stooping, bending, pushing, kneeling, stretching, and walking demands. * Must be able to stand for long periods of time. * Must be physically capable of performing all assigned duties. * Normal color vision is required. * A physical is required for personnel working in fuel cell maintenance. Must be able to enter the smallest cell opening, must be able to become qualified for and use a respirator. * Must be able to lift a minimum of 50lbs M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

Yulista Solutions LLCRegular Primary Function The Aircraft Mechanic -performs a variety of simple to moderately complex tasks on airplane general, airframe and powerplant systems. * Perform maintenance on aircraft, including mechanical systems, and/or ground support equipment. * Repair, inspect and maintain structural, mechanical and electrical elements of the aircraft. * Knowledgeable in the use of and be able to train others in the use of a wide variety of diagnostics devices, computers, hand, and mechanical tools. * Provide oversight and have the ability to direct and train others in the completion of aircraft related maintenance tasks. * May include Designated System Inspector (DSI) duties. * Troubleshoot systems as required to meet customer needs. * Document maintenance as per Quality Assurance (QA) and established regulatory requirements. * Perform regular Foreign Object Damage (FOD) walks. * Maintain tool control. Report missing, lost, found, or unattended tools to the supervisor. Inventory and inspect tools on a regular basis and replace worn or broken tools. * Comply with safety rules and regulations while performing day to day maintenance. Promptly report all accidents, injuries, safety violations, and/or unsafe practices or procedures to supervisor. * The Aircraft Mechanic may be required to perform other related duties to meet the ongoing needs of the organization. * Validate the number of passengers, assist in loading/unloading of passengers, weigh bags and cargo, load the aircraft, secure freight and cargo. * Oversee aircraft fueling or lavatory servicing while at out-stations such as military bases or Fixed Based Operators (FBO). * Secure the aircraft while at out-stations for overnight parking. If functioning as a Crew Safety Specialist, the following duties are applicable: On operational missions, the Pilot in Command may assign duties to the CSS to carry out specified routine safety responsibilities and manage aft cabin safety requirements. In the event of an onboard emergency, CSSs are responsible for managing passenger safety and, if necessary, passenger evacuation. CSSs conduct cabin safety briefings. A CSS: * Manages passenger accountability, loading, and departing. * Performs passenger safety briefings. * Opens, closes, and locks entrance doors. * Handles baggage, including on-loading, off-loading, and securing the baggage in the appropriate aircraft compartment. * Weighs, loads, and restrains cargo. * Ensures compliance with aircraft baggage and cargo limitations. * Supervises refueling and checking fuel and lubricant levels. * Receives and stows catering materials. * Assists the flight crew as required. * Conducts Daily and Transit Checks. Performs aircraft maintenance as required, within capabilities. Supervisory Responsibilities None Desired Knowledge, Skills & Abilities * Beginner to intermediate computer skills specifically using Microsoft Office Suite; ability to learn additional computer skills or software programs. Working knowledge of advanced software applications is preferred * Ability to enter data accurately into databases. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Ability to write routine reports and correspondence * Interpersonal skills are necessary to work effectively and cooperatively with all levels of management and staff. Will also routinely interact with other crew members * Ability to use general office equipment such as fax, phone, copier, scanner, printers, etc. * Ability to follow a process. * Strong professional customer service skills, including active listening, prompt service and follow-up. * Strong decision analysis and problem solving skills; ability to draw conclusions and justify decisions. Must be able to communicate issues to management. * Ability to learn and understand corporate policies and procedures and how they relate to goals. * Ability to perform basic mathematical computations * High degree of self-motivation and the ability to work independently * Ability to multi-task * Climbs on top of and down from aircraft using aircraft hand/foot holds, capable of lifting up to 25 lbs. overhead, on feet all day, walk up to 2 miles per day. * QC/QA experience preferred. Required Qualifications * Federal Aviation Administration (FAA) Airplane and/or Powerplant certification. * 4+ years of aircraft maintenance on 737 Classis aircraft. * Knowledge of commonly-used concepts, practices, and procedures within the field required. * May be required to travel domestically and internationally - US Passport required. * Ability to obtain and maintain a U.S. Department of Energy (DOE) "Q" clearance within a timeframe set forth by management. US Citizenship required. PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.

Hands-on experience with Rating Engine in the Property & Casualty (P&C) insurance domain. Expertise in rating frameworks and integration frameworks, ensuring accurate and efficient pricing solutions. Proficient in version control systems (Git) and CI/CD tools for streamlined development and deployment. Skilled in system integrations using SOAP/REST APIs and messaging protocols for seamless connectivity. Design and implementation: Design, configure, and implement rating and product model changes within PNC Domain Knowledge. Develop and maintain rate books, rate tables, and rate routines with rating mechanism Work closely with business analysts and solution architects to translate business requirements into technical solutions. Integrate the rating engine with other systems, such as billing, claims, and external rating services. Perform unit and regression testing, document rating configurations, and maintain change history. Ensure configurations adhere to PNC best practices and version upgrade standards. Strong proficiency in rating mechanism programming.

Join a Global Leader in Workforce Solutions - Net2Source Inc. Who We Are Net2Source Inc. isn't just another staffing company, we're a powerhouse of innovation, connecting top talent with the right opportunities. Recognized for 300% growth in the past three years, we operate in 34 countries with a global team of 5,500+. Our mission? To bridge the talent gap with precision-Right Talent. Right Time. Right Place. Right Price. Job Title: A319 Retrofit Interiors Engineer Location: Fort Worth, TX Duration: 12 months Pay Range: $55 - $60/hr Job Description: This position is to provide support to cabin electrical, IFE, and WIFI systems. Support repair and alterations of the cabin electrical systems via EO or EA. • Working with other engineering teams, create or revise task cards, AMM, IPC, AWDM, and CMMs for cabin electrical systems. • Investigate and develop fixes for reliability items on cabin electrical systems. • Work with suppliers and OEMs to develop alterations to existing systems, including possible removal and replacement of a system or component to support ongoing efforts. • Support line operations by review of daily out-of-service aircraft or degraded systems and provide technical support. Qualifications: • BS is Engineering (required, not Engineering Technology and not Engineering Management), Electrical Engineering preferred. • Ten or more years of experience in aircraft In-Flight Entertainment, WiFi, or aircraft cabin electrical systems. • Experience with airline processes and procedures. Airlines experience preferred. • Must have good interpersonal skills, work well with others in a group, and be self-motivated and able to prioritize workload and multiple high-priority items. Why Work With Us? We believe in more than just jobs-we build careers. At Net2Source, we champion leadership at all levels, celebrate diverse perspectives, and empower you to make an impact. Think work-life balance, professional growth, and a collaborative culture where your ideas matter. Our Commitment to Inclusion & Equity Net2Source is an equal opportunity employer, dedicated to fostering a workplace where diverse talents and perspectives are valued. We make all employment decisions based on merit, ensuring a culture of respect, fairness, and opportunity for all, regardless of age, gender, ethnicity, disability, or other protected characteristics. Awards & Recognition • America's Most Honored Businesses (Top 10%) • Fastest-Growing Staffing Firm by Staffing Industry Analysts • INC 5000 List for Eight Consecutive Years • Top 100 by Dallas Business Journal • Spirit of Alliance Award by Agile1 Ready to Level Up Your Career? Click Apply Now and let's make it happen.

Mechanic Earn extra income House Cleaning on your terms! Join Airtasker, the community platform connecting people ready to work with those who need jobs done. With Airtasker, you decide when and where you work-choose tasks that match your skills, set your own rates, and work as much or as little as you want. No startup fees, no monthly costs-just a straightforward way to turn any skill into extra income or build a career at your own pace. Complete tasks like regular house cleaning, move-out cleaning, Airbnb turnovers and more! Get started today! Why Join Airtasker? Flexible income: Be your own boss, set your own hours, and choose tasks that fit your schedule. Easy start: Most tasks require no special licensing or vetting, so you can start right away. Wide variety of tasks: Find everything from handyman work and pet care to skilled trades and creative gigs. Build your reputation: Stand out with reviews, earn badges, and increase your visibility to customers. Lower fees for loyal Taskers: Complete more tasks to enjoy lower service fees over time. Requirements: Age 18 or older Own an iPhone or Android smartphone Have the tools and skills for accepted jobs Commit to excellent customer service Keep work on the platform so we both earn! No need to apply-simply sign up on Airtasker.com, browse available tasks, and start making offers today! Start earning now!

Aircraft Mechanic III (LUH72) A&P Performs scheduled and unscheduled aircraft maintenance, to include repairs, modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise and guidance to solve complex problems by interpreting technical data such as; blue prints and manufactures manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft Sheetmetal/structural modification and repair and the ability to determine functionality of complex electrical systems. Required thorough knowledge of aircraft mechanical component troubleshooting, diagnosing problems, repair procedures and replacement of parts require broad knowledge of aircraft sheet metal/structural modifications and repair. Required basic knowledge of electrical theory. Required to have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Required working knowledge of making entries in aircraft logbooks & records, military technical publications, and the Army's Unit Level Logistics Aviation Information System, ULLSAE. Required to have thorough knowledge of aircraft sheet metal and structural modification and repair. Required to have the ability to determine functionality of non-complex electrical systems. Required to have detailed knowledge of aircraft unique tools such as cable tensiometers. Accomplishes inspections including, but not limited to preflight, thru-flight, basic post-flight, and phase inspections. Launches and recovers aircraft as required. Performs operational checks of all aircraft systems and maintains aircraft appearance and cleanliness. Operates all associated ground support equipment and uses hand tools, special tools, and fixtures applicable to aircraft. Performs all tasks associated with ground movement of aircraft. Annotates maintenance actions in aircraft records/forms and completes associated CAMS entries. Practices good housekeeping, tool control, FOD Awareness and prevention and safety at all times. Perform other qualified duties as assigned. Minimum Requirements Knowledge of the use of aircraft hand tools, special tools, and test equipment is required. Must have a working knowledge of aircraft safety requirements and know how to operate portable firefighting equipment. The ability to read, interpret, and comprehend schematic diagrams, drawings, charts, and technical publications are required. Must be able to routinely lift and/or move objects weighing up to 50 pounds. Must be able to perform duties of the job including, but not limited to, standing, lifting, bending, pushing, and pulling for extended periods of time. Frequently required to climb or balance and work in small spaces, ladder work and working at heights at or above 40feet is required. Required valid up-to-date A&P license and required to have five years aviation maintenance experience, five years rotary wing aircraft experience, and two years on the assigned MDS. All experience must be within the ten most recent years. If no A&P license, required to have five years aviation maintenance experience, five years rotary wing aircraft experience, and two years on the assigned Mission Design Series (MDS). All experience must be within the ten most recent years. All mechanics assigned to perform maintenance on FAA certified aircraft must meet FAA requirements. Required to possess the level of experience necessary to inspect all required aeronautical type maintenance to be performed by skill class Mechanic I and must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Required thorough knowledge of aircraft mechanical component troubleshooting, diagnosing problems, repair procedures and replacement of parts require broad knowledge of aircraft sheet metal/structural modifications and repair. Required basic knowledge of electrical theory. Required thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Required working knowledge of making entries in aircraft logbooks & records, military technical publications, and the Army's Unit Level Logistics Aviation Information System, ULLSAE. Required thorough knowledge of aircraft sheet metal and structural modification and repair. Required ability to determine functionality of non-complex electrical systems. Required detailed knowledge of aircraft unique tools such as cable tensiometers. Driver's License High School Diploma or Equivalent required. Must provide own Tools/ Toolbox / Tools must be shadowed and etched with PID Must be able to travel as required for LUH mission Clearance Requirements: Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility. Physical Requirements: The diversity of work conditions may range from an environment where there is little or no physical discomfort to an environment where inclement weather may subject individual to severe changes of temperature, wind, rain, or snow, ice, etc. May be required to work in areas where high noise hazards prevail. May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards. Must be able to routinely lift and/or move objects weighing up to 50 pounds. Must be able to perform duties of the job including, but not limited to, standing, lifting, bending, pushing, and pulling for extended periods of time. Frequently required to climb or balance and work in small spaces, ladder work and working at heights at or above 40feet is required. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

RAVN Group ("RAVN") is pushing the boundaries of innovation in the aviation industry, focusing on cutting-edge technology and advanced aerospace solutions. As part of the RAVN team, you'll be at the forefront of revolutionizing pilot training on military grade aircrafts and aerospace engineering in the defense sector. RAVN provides combat or high maneuver training for pilots, RDT&E, and maintenance services with its fully owned fleet of aircraft. Job Description: Department Summary The RAVN Aerospace Maintenance Department is a mission-focused, highly skilled team dedicated to ensuring the safety, readiness, and performance of our tactical aircraft fleet. With over 50 years of combined experience supporting military adversary air programs, our team brings deep expertise in tactical aviation maintenance. Staffed by certified A&P aircraft mechanics, technicians, quality assurance professionals, and logisticians, we deliver precise, efficient, and compliant maintenance operations. Our commitment to operational excellence is central to RAVN's mission, enabling safe, seamless, and reliable flight operations in demanding environments. Position Summary The ideal candidate for the Aircraft Mechanic position is a technically astute, disciplined, and team-oriented professional with a strong background in egress systems. Reporting to the Site Lead, this individual will perform organizational, intermediate, and limited depot-level maintenance on assigned aircraft, components, and equipment-including inspection, operational testing, repair, modification, and troubleshooting. The role requires advanced technical expertise to resolve complex issues and provide guidance and instruction to fellow team members. Candidates must demonstrate professionalism, productivity, and responsiveness to the needs of the company, colleagues, and customers. Flexibility is essential, as cross-training and additional duties may be assigned at leadership's discretion to meet evolving mission demands. Requirements Oversee the inspection, repair, overhaul, and maintenance of aviation life support equipment (ALSE), including helmets, oxygen systems, survival gear, and other critical aircrew safety equipment. Perform detailed inspections, routine maintenance, and functional testing of egress systems, including MK-10 ejection seats, canopies, and explosive devices, ensuring all systems are mission-ready and compliant. Develop, implement, and manage comprehensive maintenance schedules to maintain optimal performance and compliance with aviation safety regulations and industry standards. Conduct regular quality assurance audits and inspections to verify compliance with military and FAA standards, identifying and correcting discrepancies. Maintain accurate and detailed records of all inspections, repairs, modifications, and component tracking in accordance with regulatory and internal documentation procedures. Collaborate with aircraft maintenance teams to coordinate repairs, upgrades, and replacements, minimizing downtime and maximizing fleet availability. Provide training and guidance to aircrew and maintenance personnel on the proper use, care, handling, and emergency procedures for life support equipment. Monitor industry trends, regulatory changes, and emerging technologies in aviation life support and egress systems; integrate best practices into operational procedures. Assist in the development and continuous improvement of standard operating procedures (SOPs), policies, and compliance protocols. Serve as the primary point of contact for regulatory audits and inspections related to life support equipment and ensure full compliance with applicable standards. Coordinate with procurement and supply chain teams to ensure timely sourcing and availability of parts, equipment, and consumables necessary for mission support. Have or have the ability to obtain a secret clearance. Desired Experience/Skills A&P Prior military Martin Baker and OEM seat experience. Minimum of 8 years of hands-on experience in aviation life support equipment (ALSE) maintenance, with a strong technical foundation in inspection, servicing, and repair. At least 4 years of specialized experience performing inspections, overhauls, and routine maintenance on MK-10 Ejection Seats. Deep understanding of aviation safety regulations, technical standards, and best practices related to egress and life support systems. Proven track record in performing precise equipment inspections, diagnosing faults, executing repairs, and ensuring maintenance compliance. Strong organizational skills with exceptional attention to detail and the ability to manage multiple priorities in a fast-paced, mission-driven environment. Effective leadership and communication skills with experience supervising or mentoring diverse technical teams. Proficient in Microsoft Office applications and maintenance tracking software; comfortable navigating digital tools for documentation and scheduling. Self-motivated and proactive with a problem-solving mindset and the ability to make informed decisions under pressure. Support Equipment Operator License (Tow Tractor, N2 Servicing Trailer, and Mobile Start Unit at a minimum). Physical Demands Occasional lifting of up to 50 pounds. Regular use of hands and fingers to handle, feel, or operate objects, tools, or controls, reaching with hands. Regularly ascend/descend stairs. Occasional aircraft hangar or warehouse environment with exposure to loud noises, fumes from engines and chemicals, unpredictable climate (hot/cold), and electrical shock, or trip or slip hazards. May be exposed to or required to handle hazardous material. Specific work hours determined by operational, departmental, or contractual requirements. Occasional evening, weekend, holiday work may be required. Travel to various work sites may be required. Other duties as assigned. Work Authorization Must be lawfully eligible to work in the United States and complete an I-9 Form. Must have a clean driving record. RAVN Aerospace is a Drug & Alcohol-Free Workplace. Pre-employment, random, or for cause drug/alcohol testing (including for marijuana) required. Pre-employment and ongoing physical certifications. RAVN Aerospace is an EEO/AA/Disabled/Veterans Employer I understand that if an offer of employment is made, I may be required to undergo investigation into all statements and references contained in this application. Said investigation may include credit, driving, criminal background, professional references, and other background checks. By applying for this position, I authorize post-offer investigation into my background as necessary and as a condition of employment. Note: a criminal conviction does not constitute an automatic bar to employment and will be considered only as it substantially relates to the position in question.

Task Description: Aircraft Mechanic III (23023): Leads a team in the performance of aircraft maintenance, inspections, and scheduled / unscheduled maintenance. Processes the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. Capable of performing, supervising and inspecting the duties of Mechanic Is, IIs and IIIs. A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level and Limited Depot Level maintenance and possess one or more of the specialties of the assigned aircraft below: Airframe/Structural, Landing Gear, Launch/Arresting, Wing/Pylon Fold, Hydraulic/Pneumatic Systems, and Mechanical Flight Control Systems Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. Aircraft Mechanic III shall have experience writing with clarity and technical accuracy, and exhibit leadership and ensure adherence to all applicable policies and procedures. Possess a high degree of expertise in the control and coordination of aircraft maintenance. Thorough working knowledge of applicable maintenance/technical manuals and publications. Thorough working knowledge of aircraft maintenance records. Working understanding of the aircraft and aircraft systems. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Performs duties as Team Lead Familiar with duties assigned to personnel within all work centers. Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. Assists in coordinating aircraft moves and static display requirements. Performs duties as Liaison with base personnel for other requirements to include but not limited to fueling / defueling operations, fire department and etc. Performs all other required duties as applicable and assigned by supervision. Performs aircraft organizational level maintenance functions on F/A-18 A-D aircraft. Scheduled and unscheduled maintenance support for assigned F/A-18 A-D aircraft Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, corrosion control, preservation/de-preservation Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in in the activities plan and daily flight schedule Aircraft maintenance action documentation via logs, records, forms, and electronic means Troubleshoot malfunctions in aircraft structure, landing gear, pneumatic, hydraulic, ventilation and heating systems. Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO). Inspect, repair, replace, and rebuild aircraft components/sub components to include rigging of flight control. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Confined space operations to include fuel cell entry Support Equipment (SE) operation and inspections Support services General aircraft maintenance Use chemical sealants. Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Requisition repair parts, materials, and consumable supplies through military supply system. Perform other tasks as directed. Preferred Qualifications: Eight or more years' experience with NALCOMIS/OOMA Eight or more years' organizational and/or depot maintenance experience. Eight or more years' of 4790 (NAMP) program knowledge. Naval Aviation Maintenance Control Management for Optimized Organization Maintenance Activity course (C-555-0053) or if previously completed, both the Naval Aviation Maintenance Control Management course (Course D/E-555-0040) and the Naval Aviation Officer and Senior Supervisor NALCOMIS OOMA Familiarization course (Course D/E-555-0054). Familiarity and ability to use NAVAIR IETMS. Advanced Corrosion Control Course/Paint and Final Finish Previously certified F/A-18 CDQAR Basic Qualifications: Five or more years' F/A-18 experience Must of attended F/A-18 initial formal training Must be able to work 1st, 2nd, or 3rd shift or as required. Basic Corrosion Control Course. Must be able work flexible work-week schedules as required. Must be able to pass a background check. Satisfactory completion of a National Agency Check Local Records Check and Credit (NACLC) or Access National Agency Check with written Inquiries (ANACI) resulting in eligibility for a SECRET clearance shall be required of employees assigned to perform: - Maintaining Aircraft Logs and Records - Maintaining F-18 A-D Avionics Systems - Mix and/or application of Low Observable or RADAR Absorbent Materials Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must be able to deploy to support off station exercises and perform other support duties as assigned. Must be eligible for Common Access Card (CAC). Compensation $43.18/hour Other Compensation Employees will receive a minimum health and welfare fringe benefit of $4.00 for all hours paid to a maximum of forty (40) hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees have a minimum of eleven paid holidays. After completing one year of service, employees will have 92 hours paid vacation. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

JOB TITLE: Aircraft Mechanic II - Free Housing Support PAY RATE: $47-50/hour MUST BE US PERSONS We are a national staffing firm partnering with top-tier aerospace companies, and we are seeking first-class employees to join our clients' teams! Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Job Details: Contract Length: 12 months (opportunity for extension) Benefits: Medical, dental, and vision coverage through Cigna Perks: Bonus potential and priority as a Tier 1 supplier Opportunities: Thousands of openings nationwide Housing Assistance: Up to two weeks, if applicable (terms and conditions may vary). Summary: Perform structural repairs and modifications on aircraft, including flight controls, hydraulics, and fuel systems. Read and interpret blueprints, technical orders, and manufacturer manuals for repair work. Utilize specialized tools such as torque wrenches, micrometers, and sheet metal brakes. Maintain technical certifications and follow strict safety protocols. Work various shifts, including weekends and overtime, as needed. This is a non-managerial, non-leadership role. Required Skills: 4+ years of heavy aircraft structures experience (clearly list aircraft platform experience on resume). Expertise in close tolerance drilling, reaming, removal, and installation of critical structures (e.g., doublers, triplers, seat tracks, stringers). Ability to obtain customer approval for aircraft access (Dual citizenship may affect eligibility). Physical Requirements: Must be able to climb ladders, work in confined spaces, and lift up to 35 lbs. Exposure to noise and elevated platforms, requiring PPE use. Desired Skills: Experience with VIP or specialty aircraft interiors. Depot-level/heavy structures maintenance experience. FAA Airframe and/or Powerplant certification (preferred). About Us: The Structures Company is a premier national staffing firm specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we provide professionals with opportunities to excel in the aviation and aerospace industries. Eligibility Requirements: U.S. Citizenship required under ITAR regulations: A U.S. person is defined as a lawful permanent resident or a protected individual under 8 U.S.C. 1324b(a)(3). Keywords: aerospace, aviation, engineering, maintenance, aircraft design Take your aerospace career to new heights-apply today!

Energy Transfer, a Fortune 50 organization, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, American Heart Association, Ronald McDonald House and many more. Come join our award winning 10,000 strong organization as we fuel the world and each other! This position comes with world class compensation, benefits, 401(k) match, profit sharing, and PTO. Summary Performs inspections and maintenance on company owned single engine aircraft. Essential Duties & Responsibilities: * Assist with inspections and maintenance on company owned single engine aircraft. * Occasionally responsible for ordering parts, handling shipping, receiving, and inventory * Assist in conducting aircraft logbook & records research * Handle company paperwork including processing company credit card purchases for approval * Other duties as assigned. Requirements: Education and/or Experience, Knowledge, Skills & Abilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The requirements for this position are listed below: * FAA Certified Airframe and Powerplant Mechanic * 2 years experience in General Aviation aircraft maintenance * Significant knowledge and experience with single-engine Cessna type aircraft maintenance * Basic computer skills such as working with Microsoft Office software * Able to work without direct supervision * Strong problem solving and decision making skills * Good verbal and written communication skills * Able to work effectively in conjunction with the Lead Mechanic in managing maintenance on the patrol aircraft. * Subject to extended workdays and/or workweeks, and call-out for emergency response. Will be required to carry a cell phone. * Ability to prioritize and handle multiple tasks and projects concurrently, and able to adjust to changing priorities. Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Usually, normal aircraft maintenance shop working conditions. * Occasional overnight travel may be required. * Includes exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, which require appropriate personal protective equipment. An equal opportunity employer/disability/vet Energy Transfer is an equal opportunity employer and does not discriminate against qualified applicants on the basis of actual or perceived race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by law. The nature and frequency of the above working conditions and requirements may vary depending on individual operational circumstances. Where feasible, the Partnership will make reasonable accommodations to qualified individuals with disabilities to enable them to perform the essential functions of the job. DISCLAIMER: The statements listed in this job posting, which are subject to change, are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified.

This job is with Encode, Inc a fully owned subsidiary of Lancesoft •Perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring •Ability and understanding of routing instructions and handling of harnesses. •Perform sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes •Read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modifications and repairs •Use tooling assemblies and fixtures for depot level modification and repair of electrical wiring •Perform assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft •Troubleshoot organizational and depot maintenance level malfunctions in aircraft electrical and comms/nav-systems •Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc... •Use all equipment in accordance with established safety and operating procedures. •Perform all tasks involved in the coordination, preparation, and movement of material and tools •Operate riding type electric powered elevating equipment to accomplish work assignments •Maintain necessary certifications, licenses and permits as required for assigned work. •Perform all duties of lower Electrical classifications as required to successfully accomplish assignments Ability to perform the following requirements: •The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds. •Exposure to noise, working on elevated platforms •Use personal protective gear for face, eyes, ears, hand, and arms as required. •Pass visual acuity and color perception tests •Read, write, and comprehend the English language •Handle, use, and dispose of hazardous material •Obtain & maintain training certifications as required to support assignment responsibilities •Occasional (1 to 3 hrs) finger manipulation •On occasion, a 2-person lift may be necessary for weights greater than 50 lbs •Frequent reaching overhead (3 to 6 hrs) •Frequent walking on flat surfaces •Frequent standing flat or uneven surfaces •Frequent balancing on a ladder, steps, or uneven surfaces •Occasional climbing on 3-12 ft ladders or stands •Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls for an extended period of time •Occasional contact with metals •Frequent exposure to noise Basic Qualifications (Required Skills/Experience): •10+ years of experience with electrical/electronic theories and avionics systems, shop mathematics and practices •10+ years of experience in working with schematics, specifications, assembly drawings and standard operating procedures. •10+ years of experience with component and wire installation to include repairing, modifying, testing and troubleshooting new, experimental, and disturbed systems •Experience with fabricating new wire bundles •Experience with routing and installing wire bundles on airplanes without existing wiring (commercial routing experience preferred) •Ability to work variable shifts including weekends and overtime Preferred Qualifications (Desired Skills/Experience): •Experience with Avionics •Experience with Depot Level/Modification maintenance. •Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment •FAA certification in Airframe and/or Power Plant

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.

Axis Rental Solutions, founded in September 2014, provides essential RENTAL tools and equipment for various industries including construction markets to ensure projects are completed safely, on time, and within budget. Based in Houma and Broussard, Louisiana and Nederland, Texas, Axis serves the entire Gulf Coast with a team that boasts decades of rental equipment experience. We offer comprehensive solutions that include project planning and preparation, underlined by our strong commitment to safety through in-house programs, SEMS package, and quality checklists. Our mission is to function effectively and safely in harsh environments while ensuring customer satisfaction through our cutting-edge concern resolution process. Role Description This is a full-time, mechanic position in Nederland, TX. 3 years experience preferred. Competitive pay and benefits package.

Fueling/defueling and servicing of aircraft. Position requires frequent overhead lifting, pushing, pulling, bending, and stretching. This role requires you to maintain a safe and secure work environment, in accordance with local health, safety, and security policies and procedures. $13.00 an hour ELP: El Paso International Airport * Watch our Aircraft Fueler Video: ********************************** TA0cmrgOA&t=7s Key Responsibilities * Perform fueling in a safe and efficient manner * Drive and operate fuel trucks, hydrant cards, and stationary carts to fuel aircraft * Read and interpret aircraft weight and balance loading instructions as it pertains to fueling. * Responsible for accurate accounting of fuel transactions. * Ensure the safe and secure operations, in accordance with the highest possible standards of health, safety, security and all government statutory requirements. * Perform daily Quality Control checks on equipment * Maintain equipment in clean and functional condition * Ensure the correct loading and balancing of fuel * Responsible for defueling aircraft as directed * Comply with attendance standards * Perform other duties as assigned. Essential Skills and Qualifications: * Comfortably and continuously lift/move fuel carts and fuel hose up to 70 lbs. for durations of time, frequent overhead lifting, bending, stretching push/pulling. * Must be at least 18 years of age. * Must pass pre-employment Medical Test and Drug Screen. * Ability to proficiently read, write and speak English * Must be available and flexible to work variable shifts including weekends and holidays. * Work is done primarily outdoors, must be comfortable working in all weather conditions. * Must pass driver's test with the Department of Airports and obtain a driver's license to drive on Airport Operational Area (AOA). * Must pass background check and obtain US Customs seal * Full Flexible Schedule Required * Ability to perform basic math calculations * Must possess and maintain a valid US Driver License. * Prior experience preferred including possession of a Commercial Driver's License or experience in the Oil and Gas Industry (preferred) Knowledge, Skills and Abilities * Ability to learn quickly * Ability to understand and carry out oral and written instructions and request clarification when needed * Strong interpersonal skills * Ability to work as part of a team. * Ability to build relationships.

Regular PRIMARY FUNCTION The Aviation Mechanic performs a full range of airframe and engine maintenance, repairs, modifications, inspections and servicing of aircraft in accordance with approved methods, techniques and practices and certifies accomplished work. This position is a Skillbridge opportunity for transitioning military personnel looking for civilian opportunities to start a fulfilling career. We have locations in the following areas: Kirtland AFB, NM, Cannon AFB, NM, Birmingham, AL, Fort Rucker, AL, Hurlburt Field, FL and Eglin, FL. ESSENTIAL FUNCTIONS * Perform Aircraft Maintenance IAW instructions/drawings * Troubleshoot systems as required to meet customer needs * Document maintenance as per Quality Assurance (QA) and established regulatory requirements. * Maintain a high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. Perform rotating break room cleaning duties. * Perform regular Foreign Object Damage (FOD) walks. * Comply with processes and procedures as per DHS/Department of Defense (DOD) documents and publications. * Maintain control tools. Report missing, lost, found, or unattended tools to the supervisor. Inventory and inspect tools on a regular basis and replace worn or broken tools. * Comply with safety rules and regulations while performing day to day maintenance. Promptly report all accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. * Use Government computer system to access various technical references for airframe repairs and Government training requirements. * Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, ventilation, and heating systems. * Repair, replace, and rebuild aircraft structures and functional components including rigging, surface controls, plumbing, and hydraulic units, using hand tools, power tools, machines, equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. * Troubleshoot engines and systems and use Federal Supply systems. * Replace or repair worn or damaged components, such as alternators, fuel controls, fuel pumps, oil pumps, engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment. * Remove engines and gearboxes from aircraft, using hoist or forklift truck. * Disassemble and inspect airframe and other components for wear, cracks, security, or other defects. Repair or replace defective parts then reassemble and install in aircraft. * Perform preflight, thru-flight, and post-flight maintenance inspections. * Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. * Perform jacking and towing of aircraft. * Enter in the maintenance records description of the work performed and verifies the work was performed satisfactorily. * Service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition. * Research the technical library and other applicable technical documentation (such as * manufacturers' and DHS/DOD maintenance manuals, service bulletins, engineering and technical data) to determine feasibility and method of repairing or replacing malfunctioning or damaged components. * Perform progressive, isochronal, phase, periodic, and other hourly or calendar inspections. * Examine engines for cracked cylinders and oil leaks. * Listen to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves. Inspects jet engines and components for cracks, corrosion, FOD, burned areas, distortions, security, warping, wear, and missing segments. * Inspect jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks. Tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. * Perform full system checkouts and complete servicing on all aircraft systems. * Provide technical direction to Aircraft Mechanic Helpers and Aircraft Workers. * Other duties as assigned SUPERVISORY RESPONSIBILITIES This position does not have direct reports. KNOWLEDGE, SKILLS, & ABILITIES: * May require knowledge of and experience performing maintenance on the following aircraft: UH-60 A/L, UH-60 M, AH 64 D, AH-64E, CH-47 F, MC-130J, HC-130, C-130, C-26, T-38, CV22, V22. * Must be capable of carrying items up to 40 pounds. Heavier items must seek assistance of other workers or weight lifting devices * Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. * Must be capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. * Ability to read and interpret all aircraft instruments. * Use special test equipment and tools. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Ability to write routine reports and correspondence * Interpersonal skills are necessary to work effectively and cooperatively with all levels of management and staff. Will also routinely interact with external contacts such as customers, vendors, suppliers, shipping companies, etc. Must represent Yulista Aviation, Inc. in a professional manner at all times. * Must be trustworthy - will handle confidential information routinely * Ability to use general office equipment such as fax, phone, copier, scanner, printers, etc. * Ability to follow a process. * Strong professional customer service skills, including active listening, prompt service and follow-up. * Analytical skills with the ability to evaluate data and consider decision impact across multiple areas. * Strong decision analysis and problem solving skills; ability to draw conclusions and justify decisions. Must be able to communicate issues to management. * Ability to learn and understand corporate policies and procedures and how they relate to Yulista Aviation, Inc.'s goals. * Ability to perform basic mathematical computations * High degree of self-motivation and the ability to work independently * Ability to multi-task QUALIFICATIONS: * High School Diploma or Equivalent with 4 years' experience with 2 years using military standards and specifications * Knowledge of commonly-used concepts, practices, and procedures within the field required. * Strong communication skills * Ability to pass a drug and background screening * Must be able to obtain and maintain a government security clearance PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.

Mechanic Earn extra income House Cleaning on your terms! Join Airtasker, the community platform connecting people ready to work with those who need jobs done. With Airtasker, you decide when and where you work-choose tasks that match your skills, set your own rates, and work as much or as little as you want. No startup fees, no monthly costs-just a straightforward way to turn any skill into extra income or build a career at your own pace. Complete tasks like regular house cleaning, move-out cleaning, Airbnb turnovers and more! Get started today! Why Join Airtasker? Flexible income: Be your own boss, set your own hours, and choose tasks that fit your schedule. Easy start: Most tasks require no special licensing or vetting, so you can start right away. Wide variety of tasks: Find everything from handyman work and pet care to skilled trades and creative gigs. Build your reputation: Stand out with reviews, earn badges, and increase your visibility to customers. Lower fees for loyal Taskers: Complete more tasks to enjoy lower service fees over time. Requirements: Age 18 or older Own an iPhone or Android smartphone Have the tools and skills for accepted jobs Commit to excellent customer service Keep work on the platform so we both earn! No need to apply-simply sign up on Airtasker.com, browse available tasks, and start making offers today! Start earning now!

Job Title: Aircraft Mechanic II (Aircraft Avionics Mechanic) th MXG, TX TASK DESCRIPTION: Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational, Intermediate, and Depot Level maintenance and possess one or more of the specialties of the assigned aircraft below: Avionics/Electrical Systems and related Sub-Systems Must be knowledgeable of technical directives, Air Force Maintenance Programs, and shall be knowledgeable of and understand basic supply procedures. Aircraft Mechanic II shall have experience writing with clarity and technical accuracy, and exhibit leadership and ensure adherence to all applicable policies and procedures. Possess a high degree of expertise in the control and coordination of aircraft maintenance. Thorough working knowledge of applicable maintenance/technical manuals and publications. Thorough working knowledge of aircraft maintenance records. Working understanding of the aircraft and aircraft systems Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Mech IIs may be required to train other Mech IIs. Performs aircraft structural maintenance mechanic duties in support of B-1 aircraft systems and related sub-systems. Familiar with duties assigned to personnel within all work centers. 800 hour, 400 hour, and 200 hour Phase Inspections; Hourly Post Flight Inspections (HPOs); Time Compliance Technical Orders (TCTO); one time inspection (OTI), and time change item (TCI) replacement. Scheduled and unscheduled maintenance including repair of delayed discrepancies on the B-1 aircraft's structural, avionics, hydraulic, electrical, and propulsion, flight control, landing gear systems that includes but is not limited to: troubleshooting to identify source of discrepancies, identify failed systems/components, repair actions including flight control/engine rigging, replacement of components to restore proper operation, operational checks including landing gear extension and retraction checks, cabin pressurization, etc. Install Depot-level TCTOs, T1, and T2 Mods. Provide flight line operations support including aircraft tows, pre/post-flights, aircraft servicing, engine runs and flight line support. Aircraft wash and corrosion control operations on the B-1 aircraft's structural, avionics, hydraulic, electrical, and propulsion systems. Inspect and repair structural components, both on and off, the aircraft utilizing metal, plastic, and advanced composite materials within the scope and qualification of the CFT. Communicate and coordinate with the appropriate AMU the need for required parts/components needed to effect required repairs as expeditiously as possible. If directed by the COR, management of the Cannibalization (CANN) Program and within the scope and qualification of the CFT including all aircraft preparations, parts management, aircraft forms management and rebuild actions to include operational checks. Compliance with applicable aircraft technical data (Work Cards, Job Guides, Technical Orders, etc…) and/or other pertinent instructions such as but not limited to Engineering Technical Assistance Requests (ETARs) and local MXG instructions as provided by the site COR. Correct utilization of all applicable technical documentation in the performance of all tasks and document discrepancies identified, parts ordered and maintenance tasks completed in Integrated Maintenance Data System (IMDS). Performs all other required duties as applicable and assigned by supervision. Performs aircraft maintenance functions of the Line, Corrosion Control, and Aircraft Organizational, Intermediate, and Depot Level maintenance. Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, and corrosion control. Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in in the activities plan and daily flight schedule Troubleshoot, remove/install, and transport to/from aircraft as required, classified Line Replaceable Units (LRUs)/components IAW established procedures Troubleshoot malfunctions in aircraft structure, landing gear, pneumatic, hydraulic, ventilation and heating, flight surfaces and controls, dynamic components, and powerplant systems. Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO). Inspect, repair, replace, and rebuild aircraft components/sub components to include rigging of flight control. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Confined space operations to include fuel cell entry Support Equipment (SE) operation and inspections Operational support services General aircraft maintenance Use chemical sealants. Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Requisition repair parts, materials, and consumable supplies through military supply system. Perform other tasks as directed. Preferred Personnel Qualifications: 10 years or more of Organizational, Intermediate, and/or Depot level B-1 aircraft maintenance 3 or more years previously certified Aircraft Safe for Flight Experienced in Aircraft, Engine, ALSS, Egress, Armament, and Support Equipment Logbooks and Records entries. Advanced Corrosion Control Course/Paint and Final Finish Basic Personnel Qualifications: Three or more years' aviation maintenance experience Basic Corrosion Control Course Mech IIs must be able to obtain and maintain APU certification within the first 150 days of employment. Mech IIs must be able to obtain a Flight Line Competency Drivers certification within 30 workdays of employment Must be able to work 1st, 2nd, or 3rd shift required Must be able to work flexible work week if required Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must be able to deploy to support off station exercises and perform other support duties as assigned. Must complete screening through Access National Agency Check with written Inquiries (ANACI) resulting in eligibility for a SECRET clearance which shall be required of employees Must be eligible for Common Access Card (CAC) Compensation $39.11/hour Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees who opt out of group health insurance receive $1.50/hour paid up to 40 hours per week. Employees are able to enroll in KAI's 401k plan; the Company will contribute $2.00 per hour paid up to 40 hours per week. Employees accrue 4.00 hours of PTO per bi-weekly pay period. KAI employees at Dyess AFB have 10 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

JOB TITLE: (P) Aircraft Mechanic II - General VC Maintenance - Free Housing Support PAY RATE: $35-40/hour We are a national staffing firm partnering with top-tier aerospace companies, and we are seeking first-class employees to join our clients' teams! Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Why Join Us? Contract Length: 12 months (with potential extension) Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority as a Tier 1 supplier Opportunities: Thousands of openings nationwide Housing Assistance: up to two weeks if applicable Summary: Sealing, painting, shimming, preserving aircraft structure. Reading and interpreting engineering drawings. Using tooling for structural parts modification and repair. Performing flight controls installation, removal, and rigging. Adhering to safety and operating procedures. Requirements: High school diploma or GED 4+ years of on-aircraft general maintenance experience. Experience with Depot Level/Heavy General maintenance. Proficiency in aircraft systems: hydraulic, flight control, monuments, landing gears, fuel systems, engines. Ability to interpret engineering drawings and perform modifications. Eligibility for aircraft access approval (may exclude dual citizens). Knowledge of shop mathematics and practices. Proficiency in schematics, assembly drawings, and computer skills. Flexibility to work varied shifts, including weekends and holidays. Must be a U.S. Person (as defined by ITAR). Desired Skills: FAA A&P License or Military Technical School equivalent. Experience with aircraft engine runs and borescope inspections. Certification to operate equipment like forklifts and mobile cranes. About Us: The Structures Company is a leading aerospace staffing agency, providing top-tier talent to major OEMs and Tier 1 suppliers. We specialize in contract, contract-to-hire, and direct hire placements in engineering, production, IT, maintenance, and support roles. Eligibility Requirements: U.S. Citizenship required under ITAR regulations: A U.S. person is defined as a lawful permanent resident or a protected individual under 8 U.S.C. 1324b(a)(3). Keywords: Aerospace, Aviation, Engineering, Maintenance, Aircraft Design Take your aerospace career to new heights-apply today!

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.