Aircraft mechanic jobs in Flagstaff, AZ

TSC's Airborne Intelligence, Surveillance and Reconnaissance (AISR) Division is actively recruiting an expert Aviation Maintenance Technician to join our team in support of Flight & Ground Operations of a developmental aircraft. The ideal candidate will have a strong background in aviation mechanics, in both manned and unmanned aircraft systems, possess an acute attention to detail, as well as exceptional troubleshooting/problem solving skills to support the aircraft from development through operational phases. As part of the team, you will be responsible for conducting maintenance, inspections, and repairs on manned and unmanned aircraft systems and components, ensuring that all aircraft are mission-ready and meet applicable legal, contractual and safety performance standards. Ground & Flight Operations will be conducted at various test sites, with the primary location being located at Fort Huachuca, AZ (Sierra Vista). This position will formally report to the Test & Training Site Lead but will be responsible to multiple stakeholders within/outside of the division. This position will be responsible for developing and managing aviation Ground & Flight Operation Procedures, including the development of maintenance manuals, formal training programs, technology insertion. As an integral member of the Aviation Operations leadership team, other duties may be assigned. Key Responsibilities: Perform routine and preventive maintenance on manned and unmanned aircraft, including airframes, engines, avionics, line-replaceable-units (LRU) and other system components. Troubleshoot, repair, and replace defective or malfunctioning parts and systems. Support the development and testing phases of new technologies and configurations. Conduct inspections of aircraft systems in compliance with regulatory requirements and company safety standards. Assist in the assembly and disassembly of aircraft for flight tests, demonstrations, and operational missions. Maintain accurate maintenance logs and documentation for all aircraft. Collaborate with the engineering team to address technical issues and implement solutions during all phases of the aircraft lifecycle. Ensure all tools and equipment used are in proper working condition and comply with safety standards. Support operational personnel during pre-flight and post-flight procedures as required. Responsible for safe and effective daily operations of aircraft maintenance and flight line operations. Ensure compliance with; flight & ground procedures, training procedures, and standardization & evaluation procedures. Ensure worksite safety, and completion of digital and paper logbooks, maintenance records, FOD and tool control, Technical Orders, part accounting. Assures timely, accurate records are maintained. Execute work calendars, support Internal Audits and participate in performance reviews. Assist in preparing technical reports and briefings for the ADO and engineering/production team. Maintain access to and requirements for COMSEC access. Assists in the tracking of consumables, recording MX failures. Monitors the use of parts and tools and maintains inventories/logs. Required Knowledge: Through understanding of all physical aspects of airframe, powerplant, electrical systems, mechanical systems, RF systems, troubleshooting, personnel leadership. Past history of FAA Flight and Maintenance standards, airworthiness, and safety. Maintenance Technical Inspector Experience in an operational capacity of aviation mechanics. Adherence to DCMA procedures and reporting maintenance in logbooks. Use of maintenance manuals, Technical orders, Compliance Procedures. FOD control program adherence, execution. Required Skills: Exceptional knowledge of aviation flight line procedures and Maintenance Operations. Strong attention to detail and analytical skills. Excellent organization and planning skills, and excellent verbal and written communication. Ability to work independently in a fast-paced environment and get along with others. Ability to review, interpret, and apply industry standards (FAA/IACO) and ensure compliance to contract terms and requirements. Knowledge and experience with Air Vehicle Systems and subsystems, and Technical Manuals (General Systems, Job Guides, Work Instructions, Fault Isolation, etc.). Maintain Aircraft System maintenance logs and configuration with Logistician. Ability to obtain Crew Chief Instructor designation after 6 months of employment. Computer Skills Highly Proficient in Microsoft office suite. Able to create documents, spreadsheets, presentation materials quickly and efficiently. Experience with technical writing, preparation of reports in Adobe. Type >30 words per minute. Digital computer logging of Aviation Maintenance procedures - familiarity with commercial/military requirements for logging and maintaining aircraft. Understanding MS Windows computer functions and ability to teach others how to navigate digital maintenance resources. Required Qualifications: FAA Airframe and Powerplant (A&P) certification and 7 years' of experience in aviation maintenance operations. Minimum of 3 years group 3-5 UAS maintenance operations experience. Strong knowledge of aircraft systems, including engines, avionics, flight controls, and airframes. Strong mechanical and electrical troubleshooting skills. Prior leadership experience in an aviation maintenance role. Knowledge and experience with Aircraft Technical Manuals (General Systems, Job Guides, Fault Isolation, etc.). Experience installing and maintaining electrical systems. Ability to troubleshoot electrical issues, read electrical diagrams, schematics, and understand the theory of operation. Experience with developmental or experimental aircraft is a plus. Experience with Electrostatic Discharge (ESD) precautions and electrical safety measures. Experience using multimeter, oscilloscope, and like equipment to test electrical systems. Ability to perform line and site level maintenance and repairs. Ability to maintain aircraft maintenance logs and configuration. Excellent organization skills. Excellent written & verbal communication skills. Active SECRET security clearance. FAA Class 3 Medical. Willingness to travel as needed for field operations and support. Work Experience in aviation field in OCONUS (deployed) location preferred. Clean Background Check. Physical Work environment: The position will require working in austere locations with limited access to selective food, shelter provided at worksite. Ability to work outside for 12 hr. shifts in >100 deg F weather. Ability to lift and carry equipment and tools (up to 50 lbs). Ability to work in various weather conditions, including extreme heat and cold. Ability to work at heights or in confined spaces as needed. Must have good vision (corrective lenses acceptable) and hearing, as required for safety in aircraft maintenance. While performing work duties, the employee is regularly required to walk, sit and stand and reach with hands and arms. This position requires close vision, distance vision, color vision, depth perception and ability to adjust focus. Safety Equipment: Ability to use PPE for mechanical, audible, and chemical hazards Medical Requirements: A FAA class 3 flight physical is required annually. In addition to being found fit for the specific deployment by a medical and dental evaluation prior to deployment, there is also the requirement to comply with additional medical restrictions IAW MOD 15. MOD 15 is a set of physical and psychological standards put forward by the United States Central Command, and applies to all U.S. uniformed service members, government civilian employees, U.S. Department of Defense (DoD) contractor employees, and volunteers deploying to CENTCOM's area of responsibility. Final determination for approval resides with the CENTCOM Surgeon prior to deployment. U.S. Citizenship Required: Yes ACTIVE SECRET DoD Security Clearance Required for this Position: Yes Drug screening: Required for employment, may be tested any time. Travel: Yes, less than 25%. The candidate must be able to travel and/or deploy with relatively short notice in the event of a manning shortfall. Relocation Assistance Available: Yes Position Contingent upon Award of Contract: No TSC Benefits: TSC offers a stable work environment, a competitive salary and a comprehensive benefits package; including ESOP contributions, 401k Matching Program, Flexible Work Schedules, Tuition Reimbursement, Paid Leave and much more. Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Duties & Responsibilities: Airframe & Powerplant Mechanic The A&P Mechanic is responsible for performing scheduled and unscheduled maintenance of flight school aircraft. The mechanic will be accountable for completing all work in accordance with AeroGuard Company procedures and requirements, as well as all applicable regulatory requirements. We have four different tech levels with a salary range of $25-48 per hour. Responsibilities include but are not limited to: Must have strong interpersonal and team building skills. Must have excellent written and oral communication skills. Must have the ability to read and understand technical data such as maintenance manuals, parts catalogs, engineering drawings, service bulletins, and airworthiness directives. Must have knowledge of federal regulations relating to Title 14 parts 43 and 91. Assure that work areas are kept clean and organized. Must be able to be flexible and work all shifts on an as needed basis. REQUIREMENTS EDUCATION Airframe and Powerplant license required at the time of hire. EXPERIENCE A minimum of three recent and consecutive years of GA experience as a certificated A&P. Experience on Piper aircraft is preferred. G1000 experience is a plus. SKILLS AND ABILITIES Can work independently with the ability to make airworthiness decisions. Ability to manage workflow and adjust priorities as needed. Troubleshoot, repair, inspect, and perform maintenance on company aircraft in accordance with applicable technical data and FAA regulations. Will be required to make aircraft logbook entries and release aircraft for return to service. Must be familiar with Microsoft Office and able to learn Talon RMS computer maintenance program. EQUIPMENT/MACHINERY USED General office equipment such as facsimile, copier, personal computer, etc. Vehicle operation such as company van, truck, golf cart, aircraft etc. as required. Will require the use of various pieces of shop equipment and tools. Exposure to solvents, aviation gasoline, etc. PHYSICAL AND SAFETY REQUIREMENTS Will be working in many environments inside and outside of the facility. Will have extensive exposure to aircraft, simulators, outside conditions and equipment. May have some medium lifting up to 50 lbs. May require prolonged periods of sitting or standing, bending and stooping. OTHERS Extreme attention to detail. Self-starter does not wait for others to provide work, finds ways to keep busy or help others. Flexible/adaptable to fast changing pace and instructions according to flight school priorities. Job Type: Full-time Salary: $30.00 - $41.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Paid time off Retirement plan Vision insurance Schedule: 10-hour shift Day shift Night shift Ability to commute/relocate: Phoenix, AZ 85027: Reliably commute or planning to relocate before starting work (Preferred) Education: High school or equivalent (Preferred) Experience: Aircraft maintenance: 3 years (Preferred) License/Certification: Airframe & Powerplant License (Required) Work Location: In person

DEPARTMENT OF PUBLIC SAFETY The Department of Public Safety's mission is to protect human life and property by enforcing state laws, deterring criminal activity, and providing vital support to the state of Arizona and its citizens. Visit our website at ************* AIRCRAFT TECHNICIAN - ROTARY WING Salary: $66,547.94 - $91,501.28 To apply, you must go to the DPS website. Click here and follow the instructions to submit your on-line application. Job Summary: Responsible for field and shop repair and maintenance of helicopters to ensure airworthiness. Under general direction, repairs, overhauls, inspects, maintains, cleans, and returns helicopters to service; performs related work as required. Assumes the duties and responsibilities of the Aircraft Technician Supervisor as required. The duties and responsibilities of this class are governed by established maintenance schedules, limitations of shop and field maintenance facilities, and Federal Aviation Administration regulations. This recruitment will be used to establish an 18-month eligibility list to be used for current and future vacancies in the Phoenix area. Minimum Qualifications: All Levels of Aircraft Technician require: High school diploma or possession of a G.E.D. certificate. Possession of a valid technician's license with airframe and power plant ratings issued by the FAA. Possession of a valid Arizona driver license. Possession of a complete set of aircraft technician's tools. Experience in the repair and maintenance of turbine helicopters. Absence of violations of FAA regulations. In addition to the above requirements, the following qualifications shall also apply: Requires three (3) years of experience in the last five (5) years, maintaining helicopters, with responsibility for completing major and minor overhauls to return helicopters to flight status. Progression to the next step requires an overall performance rating of at least "Standard" in the last 12 months. Pre-Employment Requirements: Applicants must complete an examination process. A polygraph and background investigation are required for successful applicants. DPS supports a drug-free work environment through pre-employment drug testing. If this position requires driving or the use of a vehicle as an essential function of the job to conduct State business, then the following requirements apply: Driver's License Requirements. All newly hired State employees are subject to and must successfully complete the Electronic Employment Eligibility Verification Program (E-Verify). Benefits: The Arizona Department of Public Safety is proud to offer a comprehensive benefits package to benefit-eligible employees in cooperation with the State of Arizona. • Accrued vacation pay and sick days • 10 paid holidays per year • Deferred compensation plan • Top-ranked retirement plans • Affordable medical, dental, vision, life, and short & long-term disability insurance plans • Employee Assistance, Peer and Family Support Programs • Bus Cards (Subsidized partially by the State) • Paid Parental Leave-Up to 12 weeks per year paid leave for newborn or newly-placed foster/adopted child (pilot program). For a complete list of benefits provided by The State of Arizona, please visit our benefits page Retirement: State employees are required to participate in the Arizona State Retirement System (ASRS), the State sponsored retirement contribution plan and the Long-Term Disability (LTD) program after a 27-week waiting period. The ASRS defined benefit plan provides for life-long income upon retirement. You will also have the option to participate in a voluntary deferred compensation program to take advantage of tax-deferred retirement inveestments. On, or shortly after, your first day of work you will be provided with additional information about the available insurance plans, enrollment instructions, submission deadlines and effective dates. Contact Us: The State of Arizona is an Equal Opportunity/Reasonable Accommodation Employer. Persons with a disability may request a reasonable accommodation such as a sign language interpreter or an alternative format by calling **************. Requests should be made as early as possible to allow sufficient time to arrange the accommodation.

For more than 50 years, Marsh Aviation has been a leader in engineering and innovation for performance and reliability-oriented aircraft upgrades and modifications. The company is known world-wide and specializes in repurposing existing airframes into modern, capable, efficient and cost-effective aircraft. Job Description Aircraft Mechanic The Aircraft Mechanic performs test, repair, installation, and modification on a variety of aircraft systems and structures. General duties include: Maintain, repair, and modify components including but not limited to structural, flight controls, hydraulics, pneumatics, fuel systems, and mechanical components; Able to perform a variety of diagnostic and mechanical duties on turboprop and piston multi-engine aircraft. Responsible for clear, concise and accurate reports in logs, inspection reports, and production documents. Qualifications Experience and Qualifications: FAA Airframe and Powerplant (A&P) certificate is required; Working knowledge of aircraft engines, mechanical systems, and components; Familiar with CFR parts 21 and 145; Able to read and understand approved manuals, Illustrated Parts Breakdowns, Airworthy Directives, Service Bulletins, and other technical service documentation; Working knowledge of 100 hour, annual, and progressive inspection procedures set forth in FAR 43; 10 years + aviation experience; High school diploma or equivalent; Successful candidates must be US Citizens or Permanent Residents. Additional Information All of your information will be kept confidential according to EEO guidelines. Marsh Aviation offers competitive pay and benefits; we invite you to learn more about the company at ********************** Marsh Aviation is an Equal Opportunity Employer.

The USMC MQ-9 CLS Mechanic is a highly qualified and skilled aircraft/composite mechanic with experience in structures, hydraulics, engines and avionics using diagrams, blueprints, and publications. The mechanic will directly support the USMC MQ-9 Site Manager while at the same time being available to support hands-on maintenance and leadership/training on an as needed basis. **Essential Responsibilities:** + Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc. + Diagnose malfunctions, isolate causes, and correct breaks. + Test engine operations, use test equipment to locate source of malfunction(s). + Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices. + Disassemble and inspect parts for wear, warping, or other defects. + Repair/replace defective engine components and reassemble and install engines in aircraft. + Adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. + Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. + May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. + Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. + Other tasks as assigned. **Minimum Qualifications:** + Must have an active Secret US Government clearance with ability to obtain Top-Secret clearance. Note: US Citizenship is required to obtain a Secret Clearance. + Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum. + Minimum of five years of actual Aircraft Mechanic maintenance experience required. + Minimum of two years' experience on MQ-9 aircraft, as Aircraft Mechanic. + Must have advanced knowledge of basic and complex mechanical maintenance and repair. + Must possess advanced knowledge of technical publications related to aircraft mechanical maintenance. + Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. + Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have an advanced understanding of applicable systems. + Shall have been designated a CDI or Red-X inspector for their applicable specific T/M/S UAS aircraft or equipment employed to inspect. + Shall have previous CDI, CDQAR, Organizational Maintenance experience. + Must be able to inspect and operate ground support and auxiliary equipment. + Must have knowledge of CNAFINST 4790.2 NAMP and DAFI 21-101. + Must achieve a passing grade in all required courses/certifications for continued employment, as needed. + Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. + Must be able to speak, read, write, and understand English. + Must have current/active State Issued Driver's License. + Must be able to acquire and maintain a valid flight-line Government Driver's License. **Preferred Qualifications:** + Top Secret clearance + Associate degree in a relevant career field. + Licensed by the FAA as an Airframe and Powerplant Mechanic. + Aircraft Mechanic experience within the last 10 years. + Prior experience as a Defense Contractor. + MQ-9 Aircraft Composite Repair / Replacement Experience. + NDI Qualified. \#MQ-9 Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

GAL AeroStaff Ltd. is an aerospace staffing is a company specializing in temporary and permanent staffing for general and technical positions the aviation and aerospace industry. In keeping with this goal, each benefit program has been carefully devised. These benefits include time-off benefits, such as vacations and holidays, and insurance and other plan benefits. We are constantly studying and evaluating our benefits programs and policies to better meet present and future requirements. AerSale - Non-Licensed Aircraft Mechanic Location: open to all sites Pay: $24-$36/hr DOE Travel Pay: $500 Referral Bonus: $250 Tools Required Open to Military Experience About the Role AerSale is seeking skilled Non-Licensed Aircraft Mechanics to support inspection, repair, modification, and overhaul of commercial and cargo aircraft. This position works in a high-volume MRO environment with hands-on tasks across multiple aircraft platforms. Candidates with strong mechanical aptitude-whether from aviation, military, automotive, diesel, or related fields-are encouraged to apply. Key Responsibilities Perform routine and non-routine aircraft maintenance tasks under the supervision of licensed personnel. Assist in troubleshooting, component removals/installs, and system repairs. Follow maintenance manuals, technical data, and work instructions. Complete task documentation accurately and ensure work meets FAA and company standards. Use hand tools, power tools, and ground support equipment safely and correctly. Maintain a clean, organized, and safety-focused work environment. Support A&P mechanics, inspectors, and leads as needed to meet production goals. Qualifications Previous mechanical experience required; aviation or military preferred. Ability to read and understand basic aircraft manuals and technical instructions. Familiarity with safe use of aircraft tools and equipment. Must supply own basic toolset. Ability to work overtime and adapt to changing priorities in a fast-paced MRO setting. High school diploma or equivalent. Why Work with Us Competitive hourly pay: $24-$36/hr DOE $500 travel pay for eligible travelers $250 referral bonus Long-term MRO opportunity with advancement potential Work with a respected aviation maintenance organization across multiple aircraft platforms Supportive environment open to candidates transitioning from military or other mechanical industries

Are you eager to be part of an innovative team in the aviation industry, transforming the way we approach aviation technology? Our client stands as a prominent figure in the realm of aircraft window design, manufacturing, and the production of composite parts at their cutting-edge facility. Boasting ISO 9001:2015 / AS9100D certification, they specialize in aerospace window/windshield composite intricacies, sheet metal wing spars, and fuselage assemblies. They are currently on the lookout for a Regional Repair Sales / Aircraft Window Technician possessing an A&P License in locations including Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC. What's in It for You: Salary: $45,000-$60,000 annual bonus, potential for substantial monthly incentives Position Type: Permanent - Full-time. Benefits: Comprehensive package including Medical, Dental, 401k, Disability, Company-provided life insurance, and FSA. A Glimpse into the Life of an Aircraft Technician / A&P Mechanic: As the Aircraft Technician / A&P Mechanic, your primary mission is to provide aircraft window services to our existing clients while expanding our customer base and sales within your designated Regional Market. Your responsibilities include inspecting aircraft windows, assessing defects for airworthiness, repairing scratches, pits, and other window damage, as well as removing and installing replacement windshields and windows. Key Responsibilities: Removing existing windows. Preparing and installing new windows. On-call 24/7 to respond to customer requests for emergency AOG (Aircraft on Ground) services. Utilizing an orbital sander with various grits of sandpaper to restore damaged areas. Reviewing, interpreting, and applying technical data relevant to your tasks. Managing the acquisition of purchase orders from customers as per the provided quotes. Coordinating service schedules with aircraft owners/operators and maintenance managers. Completing and submitting billing information and evaluation forms to our headquarters in Wichita, KS. Providing the necessary airworthiness documents to customers upon job completion. Traveling as required to customer locations via ground transportation, air travel, or airlines. Compiling weekly expense reports detailing costs for gasoline, entertainment, and customer relations. Signing off on all work orders and maintaining part traceability records. Conducting daily visits and/or phone communication with both current and potential customers. Developing and expanding sales in the assigned Regional Market. Seeking guidance and direction as needed for your duties. Keeping your supervisor/manager informed of the status of your work. Reporting problems and potential issues to your supervisor/manager as soon as possible. Maintaining a neat and orderly work area. Presenting a well-groomed appearance suitable for the role and context. Respecting the confidentiality of company, customer, and personnel information. Performing additional duties and tasks as assigned by your supervisor. Assisting and training other employees as required. Qualifications: Education: High School Diploma/General Education Degree (GED). Experience: Preferred sales experience, 1 year of orbital sanding experience preferred, auto body experience preferred, previous aircraft experience preferred, A&P license or AMT certificate preferred, sales experience preferred. Technical Skills: Proficiency in using various measuring devices, strong mechanical aptitude, ability to read and interpret blueprints (preferred), ability to read and interpret technical manuals. Problem Solving/Decision Making: Ability to read and comprehend mechanical and technical manuals, applying them to practical field situations. Capability to work independently and communicate effectively with both internal and external customers, delivering exceptional customer service in a timely manner. Essential Job Functions/Physical Demands: The physical demands encompass standing on wings, moving in and out of cockpits, and working inside and outside aircraft. Travel is a requirement, with working hours ranging from 2 to 12 per day depending on demand. Ability to stand and/or sit for 8 hours a day. Ability to lift/carry weights of up to 70 lbs. Ability to twist, bend, and stoop for 8 hours a day. Ability to pinch and grip various tools with fingers and hands, using pushing and pulling motions for 8 hours a day. Ability to reach for 8 hours a day. Clear and effective communication skills. Proficiency in understanding and following work orders and process specifications. Capability to handle buffing and polishing tools for 8 hours a day. Comfort with climbing up and down ladders. If you're intrigued by the Aircraft Technician / A&P Mechanic role in Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC, seize the opportunity today! This job opportunity is presented by Total Aviation Staffing, LLC, an Employment Agency providing aviation staffing services.

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.

Job DescriptionSalary: $45.55 * Maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and shears. This job requires working knowledge of technical publications and shall be required to make entries in aircraft logs and records. The incumbent receives technical guidance, as required, from supervisor or higher-level technician. Military experience a plus. Minimum Experience Requirements: * 3-5 years turbine powered UH-60 Blackhawk experience * Must have training on UH-60 PMI phase inspections * Must be able to follow engine and component overhaul manuals * Prefer two years of experience performing maintenance checks/multi-engine * FAA Airframe & Powerplant License Preferred * UH-60 Crew Chief Flight background Preferred * Recent CAN experience is a plus * Must be able to work indoors and outdoors. * Able to lift and carry at least 50 lbs * FAA Airframe and Powerplant License Preferred. * Class D Driver License * Must pass physical and Drug test * MUST be able to obtain a Secret Clearance * Must have own tools/toolbox Duty Hours M-TH or Tu-FRI 6:30-5:00 PM [ Off Monday or Friday] Benefits Available Employee & Family Health, Dental, and Vision Insurance Options $50,000/$100,000 Life/AD&D Insurance and 24/7 Teledoc Svcs Retirement Savings Plan (similar to a 401(k) Employee Assistance Program (EAP) Cash Equivalent Benefits Paid Federal Holidays Paid Sick Leave Paid Vacation Other benefits may include, but not be limited to: a variety of other Personal Leave days off, Uniform and PPE provisions, paid training, performance awards, and occasional meal, beverage, or snack accommodations. (Please Note: Not all benefits will apply, based on a variety of factors, i.e., opt out and plan provisions, etc.) LOGMET is an Affirmative Action and Equal Opportunity Employer:we welcome and encourage all individuals, including veterans and individuals with disabilities, to apply!If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact LOGMETs Human Resources Department Manager directly: *************, **************, Ext.4 We sincerely appreciate your consideration; please feel free to contact LOGMET's HR Department anytime, with any questions you may have.

The USMC MQ-9 CLS Mechanic is a highly qualified and skilled aircraft/composite mechanic with experience in structures, hydraulics, engines and avionics using diagrams, blueprints, and publications. The mechanic will directly support the USMC MQ-9 Site Manager while at the same time being available to support hands-on maintenance and leadership/training on an as needed basis. Essential Responsibilities: Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc. Diagnose malfunctions, isolate causes, and correct breaks. Test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices. Disassemble and inspect parts for wear, warping, or other defects. Repair/replace defective engine components and reassemble and install engines in aircraft. Adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. Other tasks as assigned. Minimum Qualifications: Must have an active Secret US Government clearance with ability to obtain Top-Secret clearance. Note: US Citizenship is required to obtain a Secret Clearance. Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of five years of actual Aircraft Mechanic maintenance experience required. Minimum of two years' experience on MQ-9 aircraft, as Aircraft Mechanic. Must have advanced knowledge of basic and complex mechanical maintenance and repair. Must possess advanced knowledge of technical publications related to aircraft mechanical maintenance. Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have an advanced understanding of applicable systems. Shall have been designated a CDI or Red-X inspector for their applicable specific T/M/S UAS aircraft or equipment employed to inspect. Shall have previous CDI, CDQAR, Organizational Maintenance experience. Must be able to inspect and operate ground support and auxiliary equipment. Must have knowledge of CNAFINST 4790.2 NAMP and DAFI 21-101. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must have current/active State Issued Driver's License. Must be able to acquire and maintain a valid flight-line Government Driver's License. Preferred Qualifications: Top Secret clearance Associate degree in a relevant career field. Licensed by the FAA as an Airframe and Powerplant Mechanic. Aircraft Mechanic experience within the last 10 years. Prior experience as a Defense Contractor. MQ-9 Aircraft Composite Repair / Replacement Experience. NDI Qualified. #MQ-9 Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Duties & Responsibilities: Airframe & Powerplant Mechanic The A&P Mechanic is responsible for performing scheduled and unscheduled maintenance of flight school aircraft. The mechanic will be accountable for completing all work in accordance with AeroGuard Company procedures and requirements, as well as all applicable regulatory requirements. This is a 5 day shift from 4:00 am to 2:30 pm. Responsibilities include but are not limited to: Must have strong interpersonal and team building skills. Must have excellent written and oral communication skills. Must have the ability to read and understand technical data such as maintenance manuals, parts catalogs, engineering drawings, service bulletins, and airworthiness directives. Must have knowledge of federal regulations relating to Title 14 parts 43 and 91. Assure that work areas are kept clean and organized. Must be able to be flexible and work all shifts on an as needed basis. REQUIREMENTS EDUCATION Airframe and Powerplant license required at the time of hire. EXPERIENCE A minimum of two recent and consecutive years of GA experience as a certificated A&P. Experience on Piper aircraft is preferred. G1000 experience is a plus. SKILLS AND ABILITIES Can work independently with the ability to make airworthiness decisions. Ability to manage workflow and adjust priorities as needed. Troubleshoot, repair, inspect, and perform maintenance on company aircraft in accordance with applicable technical data and FAA regulations. Will be required to make aircraft logbook entries and release aircraft for return to service. Must be familiar with Microsoft Office and able to learn Talon RMS computer maintenance program. Must have basic hand tools. EQUIPMENT/MACHINERY USED General office equipment such as facsimile, copier, personal computer, etc. Vehicle operation such as company van, truck, golf cart, aircraft etc. as required. Will require the use of various pieces of shop equipment and tools. Exposure to solvents, aviation gasoline, etc. PHYSICAL AND SAFETY REQUIREMENTS Will be working in many environments inside and outside of the facility. Will have extensive exposure to aircraft, simulators, outside conditions and equipment. May have some medium lifting up to 50 lbs. May require prolonged periods of sitting or standing, bending and stooping. OTHERS Extreme attention to detail. Self-starter does not wait for others to provide work, finds ways to keep busy or help others. Flexible/adaptable to fast changing pace and instructions according to flight school priorities. Job Type: Full-time Salary: $35.00 - $40.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Paid time off Retirement plan Vision insurance Schedule: 8 or 10-hour shift Day shift Night shift Ability to commute/relocate: Chandler, AZ 85286: Reliably commute or planning to relocate before starting work (Preferred) Education: High school or equivalent (Preferred) Experience: Aircraft maintenance: 2 years (Preferred) License/Certification: Airframe & Powerplant License (Required) Work Location: In person

Job Description GAL AeroStaff Ltd. is an aerospace staffing is a company specializing in temporary and permanent staffing for general and technical positions the aviation and aerospace industry. In keeping with this goal, each benefit program has been carefully devised. These benefits include time-off benefits, such as vacations and holidays, and insurance and other plan benefits. We are constantly studying and evaluating our benefits programs and policies to better meet present and future requirements. AerSale - Non-Licensed Aircraft Mechanic Location: open to all sites Pay: $24-$36/hr DOE Travel Pay: $500 Referral Bonus: $250 Tools Required Open to Military Experience About the Role AerSale is seeking skilled Non-Licensed Aircraft Mechanics to support inspection, repair, modification, and overhaul of commercial and cargo aircraft. This position works in a high-volume MRO environment with hands-on tasks across multiple aircraft platforms. Candidates with strong mechanical aptitude-whether from aviation, military, automotive, diesel, or related fields-are encouraged to apply. Key Responsibilities Perform routine and non-routine aircraft maintenance tasks under the supervision of licensed personnel. Assist in troubleshooting, component removals/installs, and system repairs. Follow maintenance manuals, technical data, and work instructions. Complete task documentation accurately and ensure work meets FAA and company standards. Use hand tools, power tools, and ground support equipment safely and correctly. Maintain a clean, organized, and safety-focused work environment. Support A&P mechanics, inspectors, and leads as needed to meet production goals. Qualifications Previous mechanical experience required; aviation or military preferred. Ability to read and understand basic aircraft manuals and technical instructions. Familiarity with safe use of aircraft tools and equipment. Must supply own basic toolset. Ability to work overtime and adapt to changing priorities in a fast-paced MRO setting. High school diploma or equivalent. Why Work with Us Competitive hourly pay: $24-$36/hr DOE $500 travel pay for eligible travelers $250 referral bonus Long-term MRO opportunity with advancement potential Work with a respected aviation maintenance organization across multiple aircraft platforms Supportive environment open to candidates transitioning from military or other mechanical industries

Job DescriptionAre you eager to be part of an innovative team in the aviation industry, transforming the way we approach aviation technology?Our client stands as a prominent figure in the realm of aircraft window design, manufacturing, and the production of composite parts at their cutting-edge facility. Boasting ISO 9001:2015 / AS9100D certification, they specialize in aerospace window/windshield composite intricacies, sheet metal wing spars, and fuselage assemblies.They are currently on the lookout for a Regional Repair Sales / Aircraft Window Technician possessing an A&P License in locations including Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC.What's in It for You:Salary: $45,000-$60,000 annual bonus, potential for substantial monthly incentives Position Type: Permanent - Full-time. Benefits: Comprehensive package including Medical, Dental, 401k, Disability, Company-provided life insurance, and FSA.A Glimpse into the Life of an Aircraft Technician / A&P Mechanic:As the Aircraft Technician / A&P Mechanic, your primary mission is to provide aircraft window services to our existing clients while expanding our customer base and sales within your designated Regional Market. Your responsibilities include inspecting aircraft windows, assessing defects for airworthiness, repairing scratches, pits, and other window damage, as well as removing and installing replacement windshields and windows.Key Responsibilities: Removing existing windows. Preparing and installing new windows. On-call 24/7 to respond to customer requests for emergency AOG (Aircraft on Ground) services. Utilizing an orbital sander with various grits of sandpaper to restore damaged areas. Reviewing, interpreting, and applying technical data relevant to your tasks. Managing the acquisition of purchase orders from customers as per the provided quotes. Coordinating service schedules with aircraft owners/operators and maintenance managers. Completing and submitting billing information and evaluation forms to our headquarters in Wichita, KS. Providing the necessary airworthiness documents to customers upon job completion. Traveling as required to customer locations via ground transportation, air travel, or airlines. Compiling weekly expense reports detailing costs for gasoline, entertainment, and customer relations. Signing off on all work orders and maintaining part traceability records. Conducting daily visits and/or phone communication with both current and potential customers. Developing and expanding sales in the assigned Regional Market. Seeking guidance and direction as needed for your duties. Keeping your supervisor/manager informed of the status of your work. Reporting problems and potential issues to your supervisor/manager as soon as possible. Maintaining a neat and orderly work area. Presenting a well-groomed appearance suitable for the role and context. Respecting the confidentiality of company, customer, and personnel information. Performing additional duties and tasks as assigned by your supervisor. Assisting and training other employees as required. Qualifications: Education: High School Diploma/General Education Degree (GED). Experience: Preferred sales experience, 1 year of orbital sanding experience preferred, auto body experience preferred, previous aircraft experience preferred, A&P license or AMT certificate preferred, sales experience preferred. Technical Skills: Proficiency in using various measuring devices, strong mechanical aptitude, ability to read and interpret blueprints (preferred), ability to read and interpret technical manuals. Problem Solving/Decision Making: Ability to read and comprehend mechanical and technical manuals, applying them to practical field situations. Capability to work independently and communicate effectively with both internal and external customers, delivering exceptional customer service in a timely manner. Essential Job Functions/Physical Demands: The physical demands encompass standing on wings, moving in and out of cockpits, and working inside and outside aircraft. Travel is a requirement, with working hours ranging from 2 to 12 per day depending on demand. Ability to stand and/or sit for 8 hours a day. Ability to lift/carry weights of up to 70 lbs. Ability to twist, bend, and stoop for 8 hours a day. Ability to pinch and grip various tools with fingers and hands, using pushing and pulling motions for 8 hours a day. Ability to reach for 8 hours a day. Clear and effective communication skills. Proficiency in understanding and following work orders and process specifications. Capability to handle buffing and polishing tools for 8 hours a day. Comfort with climbing up and down ladders. If you're intrigued by the Aircraft Technician / A&P Mechanic role in Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC, seize the opportunity today!This job opportunity is presented by Total Aviation Staffing, LLC, an Employment Agency providing aviation staffing services.

The UH-60 Aircraft Mechanic - Avionics is responsible for the inspection, maintenance, troubleshooting, repair, and modification of avionics systems installed on the UH-60 Black Hawk helicopter. This position ensures aircraft avionics systems are fully mission-capable, safe, and compliant with applicable technical manuals, regulations, and operational requirements. Essential Duties and Responsibilities Perform scheduled and unscheduled maintenance on UH-60 avionics systems, including communication, navigation, flight control, and mission equipment Troubleshoot and isolate avionics system malfunctions using technical manuals, schematics, test equipment, and diagnostic tools Remove, repair, replace, and reinstall avionics components such as radios, GPS, flight instruments, wiring harnesses, displays, sensors, and integrated avionics units Conduct operational and functional checks to verify system performance and airworthiness Perform aircraft inspections in accordance with maintenance schedules and technical directives Document maintenance actions accurately in aircraft logs, maintenance records, and electronic tracking systems Interpret and comply with applicable technical manuals, maintenance procedures, and safety regulations Assist with aircraft modifications, upgrades, and incorporation of avionics kits or mission equipment Support ground and flight operations as required, including preflight and postflight inspections Maintain avionics tools, test equipment, and work areas in a clean, safe, and serviceable condition Adhere to safety, quality, and environmental standards at all times Required Qualifications High school diploma or equivalent Completion of military or civilian avionics maintenance training Experience maintaining UH-60 (Black Hawk) avionics systems or similar rotary-wing aircraft Ability to read and interpret wiring diagrams, schematics, and technical publications Proficiency with avionics test equipment and diagnostic tools Ability to work independently and as part of a team Strong attention to detail and problem-solving skills FAA Airframe and/or Powerplant (A&P) license Prior military aviation maintenance experience (15 series, 68 series, or equivalent) Experience with integrated avionics systems, digital flight displays, and mission equipment Knowledge of Army or DoD maintenance documentation systems Active or ability to obtain a security clearance (if required) Physical Requirements Ability to lift, push, and pull up to 50 pounds Ability to work in confined spaces and at heights Ability to stand, bend, kneel, and climb for extended periods Willingness to work outdoors in varying weather conditions Work Environment Hangar, flight line, and field environments May involve shift work, weekends, and deployment or travel as required Benefits Available Employee & Family Health, Dental, and Vision Insurance Options $50,000/$100,000 Life/AD&D Insurance and 24/7 Teledoc Svcs Retirement Savings Plan (similar to a 401(k) Employee Assistance Program (EAP) Cash Equivalent Benefits Paid Federal Holidays Paid Sick Leave Paid Vacation Other benefits may include, but not be limited to: a variety of other Personal Leave days off, Uniform and PPE provisions, paid training, performance awards, and occasional meal, beverage, or snack accommodations. (Please Note: Not all benefits will apply, based on a variety of factors, i.e., opt out and plan provisions, etc.) LOGMET is an Affirmative Action and Equal Opportunity Employer: we welcome and encourage all individuals, including veterans and individuals with disabilities, to apply! If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact LOGMET's Human Resources Department Manager directly: *************, **************, Ext.4 We sincerely appreciate your consideration; please feel free to contact LOGMET's HR Department anytime, with any questions you may have.

The Aircraft Mechanic III (LUH-72) A&P performs maintenance on helicopters, excluding repair of systems according to drawings, blueprints, directives, technical manuals and safety procedures. Removes and installs aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, mechanical flight controls and their components. Services and lubricates aircraft and subsystems. Prepare aircraft for inspections and maintenance checks. Performs scheduled inspections and assists in performing special inspections. Performs limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required. Uses and performs operator maintenance on tools, special tools and aircraft ground support equipment. Prepare forms and records related to aircraft maintenance. Removes and disassembles defective parts of the aircraft. Maintains the supplies and perform preventive maintenance. Performs additional duties, including maintenance duties, as requested. Adheres to company policies and safety programs (Safety-first mentality). Minimum Requirements High School Diploma or equivalent is required. U.S. military technical school or specialized training course is desired; certification of education level is required. Must have five years aviation maintenance experience, five years rotary wing aircraft experience, and two years assigned to the MDS (LUH-72). All experience must be within the ten most recent years. Valid up-to-date A&P license Must provide own tools/toolbox. Recruiters will provide toolbox requirements to candidates upon selection. Valid Driver's License. Clearance Requirements: Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility. Knowledge & Skills Thorough knowledge of aircraft systems on the assigned MDS. Advanced knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, hydraulic press machine, and those listed in the assigned MDS Maintenance Allocation Chart (MAC). Working knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects Possess the level of experience to inspect all required aeronautical type maintenance to be performed by aircraft mechanic. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift/push/pull heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test qualification. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. May be expected to work in austere environments and all-weather conditions. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Job DescriptionAre you eager to be part of an innovative team in the aviation industry, transforming the way we approach aviation technology?Our client stands as a prominent figure in the realm of aircraft window design, manufacturing, and the production of composite parts at their cutting-edge facility. Boasting ISO 9001:2015 / AS9100D certification, they specialize in aerospace window/windshield composite intricacies, sheet metal wing spars, and fuselage assemblies.They are currently on the lookout for a Regional Repair Sales / Aircraft Window Technician possessing an A&P License in locations including Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC.What's in It for You:Salary: $45,000-$60,000 annual bonus, potential for substantial monthly incentives Position Type: Permanent - Full-time. Benefits: Comprehensive package including Medical, Dental, 401k, Disability, Company-provided life insurance, and FSA.A Glimpse into the Life of an Aircraft Technician / A&P Mechanic:As the Aircraft Technician / A&P Mechanic, your primary mission is to provide aircraft window services to our existing clients while expanding our customer base and sales within your designated Regional Market. Your responsibilities include inspecting aircraft windows, assessing defects for airworthiness, repairing scratches, pits, and other window damage, as well as removing and installing replacement windshields and windows.Key Responsibilities: Removing existing windows. Preparing and installing new windows. On-call 24/7 to respond to customer requests for emergency AOG (Aircraft on Ground) services. Utilizing an orbital sander with various grits of sandpaper to restore damaged areas. Reviewing, interpreting, and applying technical data relevant to your tasks. Managing the acquisition of purchase orders from customers as per the provided quotes. Coordinating service schedules with aircraft owners/operators and maintenance managers. Completing and submitting billing information and evaluation forms to our headquarters in Wichita, KS. Providing the necessary airworthiness documents to customers upon job completion. Traveling as required to customer locations via ground transportation, air travel, or airlines. Compiling weekly expense reports detailing costs for gasoline, entertainment, and customer relations. Signing off on all work orders and maintaining part traceability records. Conducting daily visits and/or phone communication with both current and potential customers. Developing and expanding sales in the assigned Regional Market. Seeking guidance and direction as needed for your duties. Keeping your supervisor/manager informed of the status of your work. Reporting problems and potential issues to your supervisor/manager as soon as possible. Maintaining a neat and orderly work area. Presenting a well-groomed appearance suitable for the role and context. Respecting the confidentiality of company, customer, and personnel information. Performing additional duties and tasks as assigned by your supervisor. Assisting and training other employees as required. Qualifications: Education: High School Diploma/General Education Degree (GED). Experience: Preferred sales experience, 1 year of orbital sanding experience preferred, auto body experience preferred, previous aircraft experience preferred, A&P license or AMT certificate preferred, sales experience preferred. Technical Skills: Proficiency in using various measuring devices, strong mechanical aptitude, ability to read and interpret blueprints (preferred), ability to read and interpret technical manuals. Problem Solving/Decision Making: Ability to read and comprehend mechanical and technical manuals, applying them to practical field situations. Capability to work independently and communicate effectively with both internal and external customers, delivering exceptional customer service in a timely manner. Essential Job Functions/Physical Demands: The physical demands encompass standing on wings, moving in and out of cockpits, and working inside and outside aircraft. Travel is a requirement, with working hours ranging from 2 to 12 per day depending on demand. Ability to stand and/or sit for 8 hours a day. Ability to lift/carry weights of up to 70 lbs. Ability to twist, bend, and stoop for 8 hours a day. Ability to pinch and grip various tools with fingers and hands, using pushing and pulling motions for 8 hours a day. Ability to reach for 8 hours a day. Clear and effective communication skills. Proficiency in understanding and following work orders and process specifications. Capability to handle buffing and polishing tools for 8 hours a day. Comfort with climbing up and down ladders. If you're intrigued by the Aircraft Technician / A&P Mechanic role in Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC, seize the opportunity today!This job opportunity is presented by Total Aviation Staffing, LLC, an Employment Agency providing aviation staffing services.

* Maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and shears. This job requires working knowledge of technical publications and shall be required to make entries in aircraft logs and records. The incumbent receives technical guidance, as required, from supervisor or higher-level technician. Military experience a plus. Minimum Experience Requirements: * 3-5 years turbine powered UH-60 Blackhawk experience * Must have training on UH-60 PMI phase inspections * Must be able to follow engine and component overhaul manuals * Prefer two years of experience performing maintenance checks/multi-engine * FAA Airframe & Powerplant License Preferred * UH-60 Crew Chief Flight background Preferred * Recent CAN experience is a plus * Must be able to work indoors and outdoors. * Able to lift and carry at least 50 lbs * FAA Airframe and Powerplant License Preferred. * Class D Driver License * Must pass physical and Drug test * MUST be able to obtain a Secret Clearance * Must have own tools/toolbox Duty Hours M-TH or Tu-FRI 6:30-5:00 PM [ Off Monday or Friday] Benefits Available Employee & Family Health, Dental, and Vision Insurance Options $50,000/$100,000 Life/AD&D Insurance and 24/7 Teledoc Svcs Retirement Savings Plan (similar to a 401(k) Employee Assistance Program (EAP) Cash Equivalent Benefits Paid Federal Holidays Paid Sick Leave Paid Vacation Other benefits may include, but not be limited to: a variety of other Personal Leave days off, Uniform and PPE provisions, paid training, performance awards, and occasional meal, beverage, or snack accommodations. (Please Note: Not all benefits will apply, based on a variety of factors, i.e., opt out and plan provisions, etc.) LOGMET is an Affirmative Action and Equal Opportunity Employer: we welcome and encourage all individuals, including veterans and individuals with disabilities, to apply! If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact LOGMET's Human Resources Department Manager directly: *************, **************, Ext.4 We sincerely appreciate your consideration; please feel free to contact LOGMET's HR Department anytime, with any questions you may have.

**The AH64 Aircraft Mechanic I (Armament/Electrician)** is primarily responsible for the maintenance of AH-64 helicopters, twin-engine attack aircraft with performing maintenance on instruments, weapons, landing gear, rotors, and many other helicopter components. Responsible for diagnosing, repairing, and troubleshooting any issues with the AH-64 systems/subsystems. + Diagnose, troubleshoot and repair malfunctions in AH-64 systems and components. + Maintain weapons components, fire control units, sighting elements, stabilization systems, avionics, electronic and mechanical devices. + Assist in troubleshooting malfunctions to aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. + Assist with conducting repairs, replacements, and rebuilds of aircraft structures and functional components including rigging, surface controls, plumbing and hydraulic units, using hand tools & power tools. + Assist in repair of worn or damaged components, such as alternators, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment and remove engines and gearboxes from aircraft. Perform preflight, thru-flight, and post-flight maintenance inspections, miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes and jacking and towing of aircraft. This includes preventive maintenance, ensuring weapons systems and other electronics are functioning properly. + Read and interpret all aircraft instruments. + Perform wide variety of operational and preventive checks as well as maintain records on weapons and subsystems. + Use special test equipment and tools. Enter data in the maintenance records description of the work performed and verifies the work was performed satisfactorily. + Research the technical library and other applicable technical documentation to determine feasibility and method of repairing or replacing malfunctioning or damaged components. + Perform progressive, isochronal, phase, periodic, and other hourly or calendar inspections. + Perform full system checkouts on all aircraft systems. + Perform/Assist with aircraft servicing. + Document maintenance as per Quality Assurance (QA) and established regulatory requirements. + Comply with work order timekeeping system procedures. + Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. Perform weekly Foreign Object Damage (FOD) walk-downs. + Maintain situational awareness, stay cognitive-focused, and mitigate risks. + Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW approved tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. + Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. + Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. + Perform other duties as assigned. **Minimum Requirements** + **Valid and up-to-date A&P.** + If no A&P, shall have **Three (3) years aviation maintenance** experience, **two (2) years rotary wing aircraft** experience, and **two (2) years on the assigned MDS (AH64).** + Minimum of **Three (3) years of Armament maintenance experience specific to the AH-64 aircraft armament systems.** + All experience must be within the Six (6) most recent years. + **US Citizen Required.** + **Ability to obtain/maintain Security Clearance (NAC-I T1) Public Trust.** + Tools are Required; must provide own shadowed/etched Tools and Toolbox. **Preferred Qualifications** + High School Diploma or Equivalent. **Knowledge & Skills** + Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. + Possess a valid United States driver's license. + Ability to read and interpret data is required. + Ability to read, write, speak, and understand English. + Ability to obtain and maintain applicable Government security clearance. **Physical Requirements/Working Environment** + Capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. + Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. + Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. + Must be capable of wearing personal protective equipment for required operations, as necessary. + May work in Aircraft maintenance hangar or outside. + Some domestic travel may be required. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

The Aircraft Mechanic I (Sheetmetal/Structural Specialty) AH-64 troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. * Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. * Reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. * Performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. * Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. * Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. * Adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. * Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. * Knowledge of equipment related to individual requirements (AH-64). * Knowledge of military publications (including electronic manuals), drawings, blueprints, microfilm, diagrams, and schematics is mandatory. * Knowledge of military and/or company forms required by work specifications is a plus. * Perform other duties as required. Minimum Requirements * Knowledge of equipment related to individual requirements (AH-64) * Knowledge of military publications (including electronic manuals), drawings, blueprints, microfilm, diagrams, and schematics is mandatory. * Is required to climb, stand, stoop, bend, stretch, crouch, and work in tiring and uncomfortable positions. * Required three (3) years aviation maintenance experience, two (2) years rotary wing aircraft experience, and two (2) years on the assigned Mission Design Series (MDS) (AH-64). * All experience must be within the six most recent years. * A valid up-to-date A&P license is preferred but not required. * All mechanics assigned to perform maintenance on FAA certified aircraft must meet FAA requirements. * Valid Driver's License * Must provide own tools/toolbox. Tools must be shadowed and etched with PID. * High School Diploma or Equivalent required. Clearance Requirements: * Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. * Must be able to obtain and maintain facility credentials/authorization. * US Citizenship is required for facility credentials/authorization to work at this facility. Physical/Preferred Requirements: * Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Is exposed to disagreeable fumes and to cuts and bruised from using tools in close placed and hazards of moving vehicles such as forklifts in shop area. * While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. * The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions. * The employee is occasionally required to sit, climb, or balance. * Frequently lifts items weighing 15-25 pounds and occasionally in excess of 45 pounds. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.