Aircraft mechanic jobs in Florida - 231 jobs

Regular PRIMARY FUNCTION The Aviation Mechanic performs a full range of airframe and engine maintenance, repairs, modifications, inspections and servicing of aircraft in accordance with approved methods, techniques and practices and certifies accomplished work. This position is a Skillbridge opportunity for transitioning military personnel looking for civilian opportunities to start a fulfilling career. We have locations in the following areas: Kirtland AFB, NM, Cannon AFB, NM, Birmingham, AL, Fort Rucker, AL, Hurlburt Field, FL and Eglin, FL. ESSENTIAL FUNCTIONS * Perform Aircraft Maintenance IAW instructions/drawings * Troubleshoot systems as required to meet customer needs * Document maintenance as per Quality Assurance (QA) and established regulatory requirements. * Maintain a high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. Perform rotating break room cleaning duties. * Perform regular Foreign Object Damage (FOD) walks. * Comply with processes and procedures as per DHS/Department of Defense (DOD) documents and publications. * Maintain control tools. Report missing, lost, found, or unattended tools to the supervisor. Inventory and inspect tools on a regular basis and replace worn or broken tools. * Comply with safety rules and regulations while performing day to day maintenance. Promptly report all accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. * Use Government computer system to access various technical references for airframe repairs and Government training requirements. * Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, ventilation, and heating systems. * Repair, replace, and rebuild aircraft structures and functional components including rigging, surface controls, plumbing, and hydraulic units, using hand tools, power tools, machines, equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. * Troubleshoot engines and systems and use Federal Supply systems. * Replace or repair worn or damaged components, such as alternators, fuel controls, fuel pumps, oil pumps, engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment. * Remove engines and gearboxes from aircraft, using hoist or forklift truck. * Disassemble and inspect airframe and other components for wear, cracks, security, or other defects. Repair or replace defective parts then reassemble and install in aircraft. * Perform preflight, thru-flight, and post-flight maintenance inspections. * Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. * Perform jacking and towing of aircraft. * Enter in the maintenance records description of the work performed and verifies the work was performed satisfactorily. * Service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition. * Research the technical library and other applicable technical documentation (such as * manufacturers' and DHS/DOD maintenance manuals, service bulletins, engineering and technical data) to determine feasibility and method of repairing or replacing malfunctioning or damaged components. * Perform progressive, isochronal, phase, periodic, and other hourly or calendar inspections. * Examine engines for cracked cylinders and oil leaks. * Listen to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves. Inspects jet engines and components for cracks, corrosion, FOD, burned areas, distortions, security, warping, wear, and missing segments. * Inspect jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks. Tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. * Perform full system checkouts and complete servicing on all aircraft systems. * Provide technical direction to Aircraft Mechanic Helpers and Aircraft Workers. * Other duties as assigned SUPERVISORY RESPONSIBILITIES This position does not have direct reports. KNOWLEDGE, SKILLS, & ABILITIES: * May require knowledge of and experience performing maintenance on the following aircraft: UH-60 A/L, UH-60 M, AH 64 D, AH-64E, CH-47 F, MC-130J, HC-130, C-130, C-26, T-38, CV22, V22. * Must be capable of carrying items up to 40 pounds. Heavier items must seek assistance of other workers or weight lifting devices * Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. * Must be capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. * Ability to read and interpret all aircraft instruments. * Use special test equipment and tools. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Ability to write routine reports and correspondence * Interpersonal skills are necessary to work effectively and cooperatively with all levels of management and staff. Will also routinely interact with external contacts such as customers, vendors, suppliers, shipping companies, etc. Must represent Yulista Aviation, Inc. in a professional manner at all times. * Must be trustworthy - will handle confidential information routinely * Ability to use general office equipment such as fax, phone, copier, scanner, printers, etc. * Ability to follow a process. * Strong professional customer service skills, including active listening, prompt service and follow-up. * Analytical skills with the ability to evaluate data and consider decision impact across multiple areas. * Strong decision analysis and problem solving skills; ability to draw conclusions and justify decisions. Must be able to communicate issues to management. * Ability to learn and understand corporate policies and procedures and how they relate to Yulista Aviation, Inc.'s goals. * Ability to perform basic mathematical computations * High degree of self-motivation and the ability to work independently * Ability to multi-task QUALIFICATIONS: * High School Diploma or Equivalent with 4 years' experience with 2 years using military standards and specifications * Knowledge of commonly-used concepts, practices, and procedures within the field required. * Strong communication skills * Ability to pass a drug and background screening * Must be able to obtain and maintain a government security clearance PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.

Our client provides exceptional engine and component repair and overhaul services. They currently have an opportunity for a Aviation Accessory Mechanic to join their team in Miami, Florida. The Aviation Accessory Mechanic will perform intermediate and depot level repairs and/or Overhaul of aviation engine accessories in accordance with approved data and published work scopes. Aviation Accessory Mechanic Duties: Disassembly, sub-assembly and final assembly of engine and QEC accessories. Testing of accessories and related components. Understand configuration & fits requirements during build. Know and perform proper servicing procedures. Ensure all work is performed IAW posted work scopes. Aviation Accessory Mechanic Requirements: Prior experience as an aviation mechanic or test cell operator, with an emphasis on the overhaul, repair, and/or troubleshooting on aircraft accessories e.g. fuel control & fuel pumps. General understating and willingness to learn with standard aviation procedures. Demonstrate proper use and knowledge of tools and measuring equipment. Knowledge of aviation engines and components. PT6 and/or RR T56/501 accessories desirable. Must be a U.S. Citizen and able to comply with ITAR (International Traffic in Arms Regulations) requirements.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: SAPTRAVEL: Yes, 25% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Are you ready to put your experience to work at Northrop Grumman? If so, our Defense Systems wants you to join our team as a SCA Aircraft II or III. You will join our team of qualified, diverse individuals. These positions will be located in Jacksonville, FL with detachment locations to both CONUS (stateside) and international locations. * These positions require you to work/change shifts according to the need of the program; shifts include Days, Nights and weekends. **These are Service Contract Act positions You will troubleshoot, repair and service P-3 aircraft and engine systems. Conducts diagnosis of malfunctions. Performs maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications and engineering instructions. Specific duties include: Employee maintains and repairs U. S. Customs and Border Protection P-3 aircraft, aircraft systems and components including, but not limited to T-56 engines, 54H60-77 propellers, auxiliary power units, flight controls, hydraulics, pneumatics, fuel systems, oxygen and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and or operation. Applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufacturer's manuals / specifications. Work at this level requires a thoroughly comprehensive knowledge of P-3 aircraft propulsion systems / component troubleshooting and repair procedures and replacement of components. Use your thorough knowledge of P-3 aircraft fuel systems and repair, with ability to determine functionality of non-complex electrical systems, with the ability to provide technical support to maintenance management, propulsion / airframe engineers and customers. Additional job duties are required but not limited to: Performs corrosion control, preflight and post-flight maintenance inspections, fuel sampling, miscellaneous duties to service aircraft, tow and jack aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, and other tasks as deemed necessary. May be responsible for providing and receiving guidance and technical expertise to lower and from higher level technicians throughout all aircraft maintenance and/or modification efforts. Basic Qualifications: This position may be hired at a level II or level III. Level II: A High School diploma and a minimum of 3 years of multiengine transport category aircraft experience with proven ability to troubleshoot P-3 aircraft mechanical, engine and propeller systems. Level III: A High School diploma and a minimum of 5 years of multiengine transport category aircraft experience with proven ability to troubleshoot P-3 aircraft mechanical, engine and propeller systems. FAA Airframe & Powerplant (A&P) certificate. Ability to work any assigned shift and overtime as needed. Ability to use personally owned hand tools and comply with a 100% tool accountability and control process. Use customer provided tools requiring calibration and specialized test equipment. Physical ability to become respirator qualified and work in confined spaces Ability to obtain/maintain DOD Secret clearance as required. Ability to obtain/maintain a Department of Homeland CBP Background Investigation, both required to start. Ability to obtain/maintain a U.S. Passport Preferred Qualifications: Experience on P-3 aircraft systems and components including, but not limited to T-56 engines, 54H60-77 propellers, auxiliary power units, flight controls, hydraulics, pneumatics, fuel systems, oxygen and mechanical components. excluding avionics. Experience on P-3 aircraft in the structural repair, fabrication, modification and installation of sheet metal parts, items, and assemblies. P-3 engine turn qualification. Familiarity with the Naval Aviation Maintenance Program (NAMP) or equivalent. Primary Level Salary Range: $32.64 - $34.00Secondary Level Salary Range: $34.56 - $36.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Let your career take off with PSA Airlines About PSA PSA Airlines, a wholly owned subsidiary of American Airlines, offers unparalleled opportunities for growth and professional development. We value teamwork, diversity, and inclusivity and strive to create a safe, respectful, and happy work environment for our more than 4,000 employees. Our company culture, known as The PSA Way, is our foundation for operation and fosters stability, growth and a focus on the future while always placing safety at the forefront of everything we do. We are driven in our goals and achievements, eager to be better. We are reliable to one another and accountable for our actions. And we are caring in our daily interactions, with teammates, colleagues, and customers. Join our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. Benefits PSA offers the benefits you expect from a company focused on excellence. All eligible team members enjoy a comprehensive benefits package, including: * Travel privileges on the American Airlines global network * A generous vacation plan designed to let you enjoy your travel perks * 401(k) with company match * American Airlines Group (AAG) profit-sharing and bonus opportunities * A choice of three health plan options, all with nationwide coverage with the UnitedHealthcare Choice Plus network * Premium dental coverage * Vision plan options provided, including a plan that covers both glasses and contacts every year * Benefits navigation services, including finding a doctor, scheduling an appointment, understanding your medical bills, and free second opinion services * Access to 24-hour virtual urgent care services * Family planning and fertility treatment * LGBTQ+ friendly services including gender affirming care, assistance finding knowledgeable providers, and family planning * Company-paid Life and AD&D Insurance, Short-term and Long-term Disability, and supplemental life insurance options for spouses and dependent children * Flexible Spending Accounts for both Health Care and Dependent Care services * Comprehensive Employee Assistance Program providing a range of services, including 5 free in-person sessions with a health care professional Responsibilities Position Summary As the Airframe and Powerplant (A&P) Technician, you will impact PSA Airlines' business growth by conducting aviation repairs and services that allow for operations to be on time. By executing maintenance procedures in compliance with Federal Aviation Regulations and company standards, you are ensuring safe and reliable flights. Job Responsibilities * Will perform tasks necessary to comply with Federal Aviation Regulations and accept the responsibility for work performed by themselves and/or in conjunction with others and sign for same on the Company's approved forms. * Keep work areas clean. Return all equipment and tools to assigned areas. A&P Technicians will report all inoperative or faulty equipment to the Maintenance Supervisor or Lead Mechanic in charge. * Work will consist of and include any and all phases of repair and maintenance of aircraft with the aid of the employee's own tools, specialty tools provided by the Company, the use of test equipment, and Company-supplied technical manuals. * In certain cases, and A&P Technician may be authorized to perform required inspection items and assist in Company training programs. * Will at the commencement of each repair or inspection initiate the proper documentation. Parts tags will include a complete description of the discrepancy on all removed parts. Determine if the work to be performed is a Required Inspection Item. * Verifying, through proper documentation, that any part installed on any aircraft or component is approved for that aircraft or component and has been visually inspected and is free of damage or contamination. * Assure that hangar workshops and other areas assigned are maintained in an orderly manner. * Responsible for the Company's Security and Safety Management System (SMS) and associated Safety Risk Management and Safety Assurance outputs. * Perform other duties as assigned by the Maintenance Supervisor through the Lead Mechanic. Position Specifics Qualifications Required * Current FAA Airframe and Powerplant certification. * High school diploma or equivalent. * Valid, state-issued Driver's License. * Capable of using respirators and other personal protective equipment including eye and hearing protection. * Must possess or have ability to obtain a U.S. Passport or equivalent within 90 days of starting position. * Must be able to speak, read, and write in English. * Must be able to demonstrate authorization to work in the U.S. Preferred * Previous experience with CRJs. Additional Information Work Environment: This job operates inside a climate controlled building. This role routinely uses standard office equipment such as computers, telephones, photocopiers, facsimile machines and filing cabinets.Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms.Security Clearance: All employees are required to pass the fingerprint-based criminal history records check (CHRC) per 49CFR1542.209. AAP/EEO Statement: PSA Airlines is an equal opportunity employer; qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, age, disability, genetic information, protected veteran status or any other characteristic protected by law.Other Duties: Please note this job description is not designated to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionAircraft Mechanic - Join the Team at Flightstar in Jacksonville, FLTake Your Skills to New Heights We're looking for experienced and motivated Aircraft Mechanics to join our dynamic team at Flightstar, an MRO Holdings company, located in sunny Jacksonville, Florida. In this role, you'll perform advanced-level maintenance-identifying, removing, and installing critical aircraft components and servicing engines and accessories. Your work ensures each aircraft meets the highest standards of safety, airworthiness, and customer satisfaction. You'll follow precise instructions and industry safety protocols, knowing your expertise keeps our skies safe and our clients confident. Why Make the Move to Florida? ???? Year-round sunshine ???? No state income tax - more money in your pocket ✈️ Thriving aviation industry with long-term career potential ????️ Access to world-class beaches, outdoor adventures, and entertainment Position RequirementsQualifications FAA Airframe & Powerplant (A&P) Certification preferred 5 years of hands-on aircraft maintenance and repair experience strongly preferred Solid knowledge of airframe/powerplant systems, inspection procedures, and troubleshooting Able to work independently and thrive in a team environment Strong communication and critical-thinking skills Key Responsibilities Perform advanced maintenance and repairs to meet FAA and customer standards Remove, install, and service aircraft components, engines, and accessories Read and interpret maintenance manuals and safety documentation Conduct inspections and identify structural materials (aluminum, composite, etc.) Replace filters, conduct lubrication, perform leak checks Research and follow approved repair procedures for discrepancies Use Flightstar's ERP system to track parts, verify alternates, and check compatibility Work safely with hand tools and technical equipment in varying physical positions Follow all safety protocols and wear appropriate PPE Train and support apprentices as assigned Maintain accurate documentation: work orders, task cards, logs, etc. Apply working knowledge of ATA codes, airframe zones, and aviation standards Perform engine and accessory servicing, aircraft jacking, and leveling Take on additional duties as needed to support team success What We Offer Competitive salary based on experience Comprehensive benefits package (medical, dental, vision, 401(k), and more) Relocation assistance Opportunities for continued education and career advancement A collaborative, inclusive, and safety-first work environment Additional InformationDecision-Making Scope Independent Decisions: Perform day-to-day responsibilities in alignment with safety and company procedures Requires Approval: Time-off requests and other exceptions requiring leadership input Position ProfileRequirementRequiredPreferredHigh School Diploma or GED✅FAA A&P Certification✅Airframe Familiarization (FAM) Certs✅Valid Driver's License✅Aviation Experience (18+ months or A&P program graduate)✅Proficiency in English (read, write, speak)✅Basic computer skills for ERP system and technical manuals✅Physical capability for ladder use, lifting, kneeling, etc.✅Working Conditions Safety is a top priority. All team members must work in compliance with safety regulations and Flightstar's SMS (Safety Management System) culture. PPE Requirements: Safety glasses (including prescription, if applicable) must be worn as needed. Ready to take your aviation career to the next level in a place where you can grow, thrive, and enjoy life outside of work? Apply now and join a team that's elevating industry standards-one aircraft at a time. FLSA: Non- Exempt Department: Maintenance Job Title: Aircraft Mechanic Reports To: Assigned Manager or Supervisor DOT/ NON- DOT: Covered Schedule: 1st and 2nd shift available

Job DescriptionBenefits: Opportunity for advancement 401(k) Training & development 401(k) matching Competitive salary Health insurance Paid time off Job Summary: The Aircraft Mechanic is responsible for inspecting, repairing, and maintaining aircraft systems to ensure safety, functionality, and compliance with regulatory standards. This role involves diagnosing mechanical issues, performing scheduled maintenance, and ensuring that all work adheres to FAA regulations and company policies. Key Responsibilities: Aircraft Maintenance and Repairs: Perform scheduled and unscheduled maintenance on aircraft, including engines, landing gear, hydraulic systems, avionics, and other components. Troubleshoot mechanical and electrical issues to determine root causes and implement corrective actions. Inspections: Conduct detailed inspections of aircraft and components in accordance with FAA standards and manufacturer guidelines. Certify that completed maintenance meets airworthiness requirements. Documentation and Compliance: Complete and maintain accurate maintenance records, logs, and reports. Adhere to all FAA regulations, safety guidelines, and company policies. Collaboration and Communication: Work closely with other mechanics, technicians, and engineers to resolve technical issues. Communicate with flight crews and maintenance supervisors to ensure aircraft are safe for operation. Tool and Equipment Management: Properly use and maintain tools, equipment, and diagnostic devices. Ensure a clean and organized work environment. Required Qualifications: High school diploma or equivalent (GED). FAA Airframe and Powerplant (A&P) certification. Minimum of 1 years of experience in aircraft maintenance. Strong knowledge of aircraft systems, tools, and repair techniques. Ability to interpret technical manuals, schematics, and diagrams. Proficiency with diagnostic equipment and maintenance software. Excellent problem-solving and organizational skills. Preferred Qualifications: Experience with Citation, King Air, Pilatus, Hawker, and any General Aviation aircraft. Additional certifications (e.g., Inspection Authorization, Avionics). Experience in a Part 145 Repair Station environment. Physical Requirements: Ability to lift up to [50-70] pounds. Work in confined spaces and elevated areas. Stand, bend, kneel, and work at heights for extended periods. Work in varying weather conditions and environments. Work Schedule: M-F 8:30AM - 5PM Benefits: Competitive pay based on experience. Health, dental, and vision insurance. Retirement savings plan [e.g., 401(k)]. Paid time off and holidays. Training and certification opportunities. About the Company: Daytona Aircraft Services is a Part 145 FAA Certified Repair Station that specializes in a diverse range of aircraft as well as extensive avionics refurbishments.

FLSA: Non- Exempt Department: Maintenance Job Title: Aircraft Mechanic Reports To: Assigned Manager or Supervisor DOT/ NON- DOT: Covered Schedule: 1st and 2nd shift available Position Summary Perform a basic to advanced level skilled work to identify, remove, and install aircraft components and to perform servicing of engines and aircraft accessories to ensure airworthiness according to customer specifications and FAA standards. Reads and complies with instructions and safety information as necessary for proper and safe completion of assigned work. Job Duties and Responsibilities 1 Services and repairs aircraft and engines to ensure airworthiness according to customer specifications and FAA standards. 2 Removes and replaces aircraft components according to driving documentation. 3 Identifies, removes, and installs inspection access panels. 4 Reads maintenance manuals to identify and locate aircraft components on the aircraft, and accurately implements instructions of maintenance manuals. Identifies the structural composition of aircraft (i.e., aluminum or composite) prior to performing any work on the structure. 5 Performs aircraft lubrications. 6 Removes and replaces filters, and performs leak checks. 7 Performs repairs on noted discrepancies, and effectively researches manufacturer's manual for appropriate repair procedures prior to performing repairs. 8 Proficient in Flightstar's integrated operating systems relating to locating parts, alternate part numbers, requesting parts and verifying effectivity of parts. 9 Uses basic hand tools or equipment to perform skilled manual and technical work. 10 Lifts and carries hand tools, parts, and work materials; ascends and descends ladders and platforms; and frequently works in a variety of positions such as stooping, kneeling or squatting. 11 Follows safety procedures and wears/uses appropriate safety equipment for the work being performed. 12 Follows instructions and Flightstar's standard operating procedures. Responsible for remaining current on all required training regarding aircraft maintenance and safety standards to personnel assigned to him/her as apprentices, if any. 13 Communicates effectively in English regarding work activities, per FAA requirements. 14 Prepares and maintains basic records such as work order and non-routine task card documentation, logs, and time and material records, as instructed. 15 Possesses working knowledge of ATA Codes (Chapter and Subchapters) as well as aircraft zones, narrow body airframe familiarization, and industry standards. 16 Reads instructions and safety information as necessary for proper and safe completion of assigned work. Signs off aircraft maintenance paperwork as ‘Qualified Mechanic' upon meeting all regulatory and customer program requirements. 17 Performs routine servicing of engines and aircraft accessories. 18 Performs work actions in the jacking and leveling of aircraft. 19 Performs other duties as assigned. Decision Discretion Decisions made by this role that DO NOT require approval. (This does no bypass need for communication) 1 2 Decisions that will require approval. 1 Time off requests Key Interactions Internal Departments or Job Titles Purpose Immediate Manager/ Supervisor and other Maintenance Leadership Department Leads Other department employees and contract employees External Businesses or Organization Purpose Corporate and OpCO employees Customers Vendors Position Profile Required Preferred Level Academic Qualifications High School Diploma or GED required x Languages Read, speak, write, and understand the English language. x Special Licenses Airframe and Powerplant (A&P) certificate is preferred; Airframe Familiarization (FAM) course certificates preferred x Drivers License x Previous Experience Minimum 18 months of relevant experience providing knowledge of narrow and wide body airframe techniques, terminology, parts, etc, or completion of FAA approved A&P program. x Technical Skills Basic computer skills to navigate Flightstar's ERP system, vending (POU), as well as research customer's maintenance manuals. x Required Skills Lifts and carries hand tools, parts, and work materials; ascends and descends ladders and platforms; and frequently works in a variety of positions such as stooping, kneeling or squatting. x Working Conditions Personal Protective Equipment Works safely and follow safety rules and regulations. Reports unsafe working conditions and behavior. Takes reasonable prudent actions to prevent others from engaging in unsafe practices. Adheres to Flightstar's SMS safety culture. Safety glasses required. Prescription safety glasses required if applicable.

PENDING CONTRACT AWARD TASK DESCRIPTION: Aircraft Mechanic III (23023): Leads a team in the performance of aircraft maintenance, inspections, and scheduled / unscheduled maintenance. Processes the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. Capable of performing, supervising and inspecting the duties of Mechanic Is, IIs and IIIs. A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Task Requirements: Performs aircraft maintenance functions of the Line, Corrosion Control, Tool Room and Aircraft Organizational Level maintenance and flight testing support Scheduled and unscheduled maintenance support for assigned MH-60 aircraft Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, surface finish removal, corrosion control, preservation/depreservation services Maintain aircraft and aeronautical equipment to continuously support the assigned SAR readiness posture outlined in in the activities SAR Plan and daily flight schedule. Maintenance Control planning and management Aircraft maintenance action documentation via logs, records, forms, and electronic means Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO). Read and interpret manufacturers' maintenance manuals, military technical manuals, service bulletins, technical data, engineering data, blueprints, manufacturers' drawings, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Flight Line operations/functions at detachment locations as required Confined space operations to include fuel cell entry Support Equipment (SE) operation and inspections Aircraft launch and recovery Aircraft inspections Aircraft movement Support services Corrosion Control Preservation and depreservation General aircraft maintenance Technical Directive compliance and modifications Maintain Aircraft, Engines, and SE Logbooks Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Supervise subordinate mechanics and provide technical guidance on maintenance operations Other duties as assigned Preferred Qualifications: Ten or more years rotary wing maintenance experience Qualified to certify H-60 aircraft Safe-for-Flight Naval Aviation Maintenance Control Management course (C-555-0053) Collateral Duty Quality Assurance Representative (CDQAR) for Airframes, Power Plants and Electrical Systems Collateral Duty Inspector (CDI) f or Line, Corrosion Control and Avionics Systems Quality Assurance Safety Observer (QASO) Ammunition & Explosive handling qualifications Vibration Analysis Operator / Interpreter Tire and Wheel Hydraulic Contamination Plane Captain Landing Signal Enlisted (LSE) Basic Qualifications: Individual (I) Aircraft Maintenance Qualification Must be able to work 1st, 2nd, 3rd and Weekend shift as required Must be able to work flexible schedule Mon-Fri, Sun-Thur and Fri-Mon as required Must be able to provide maintenance support for actual SAR missions within two hours of notification for weekends, holidays, and before/after normal services hours as required Shall be able to travel in support of detachment operations as required Must be eligible for a Common Access Card (CAC) Satisfactory completion of T3/T3R National Agency Check Local Records Check and Credit (NACLC) or Access National Agency Check with written Inquiries (ANACI) resulting in eligibility for a SECRET clearance shall be required of all employees All other FTEs requiring access to Department of Navy (DON) IT systems or access to CUI will require a Favorable T3 investigation initiated by the Government GCA per 5510.30 series and NIMPSOMs and will be enrolled in Continuous Evaluation. All personnel will be vetted through the Contracting Officer Security Representative Must be able to climb ladders, raised platforms, and aircraft Must be able to use hand and power tools Must have dexterity to handle small parts Compensation $41.33/hour Other Compensation Employees will receive a minimum health and welfare fringe benefit of $2.65 for every hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees have a minimum of eleven paid holidays. After completing one year of service, employees will have two weeks paid vacation. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Job DescriptionBenefits: 401(k) matching Competitive salary Health insurance EM Turbines is seeking a highly skilled Aircraft Mechanic with an A&P license to join our team. The ideal candidate will have 5 years minimum hands-on experience with Falcon, Gulfstream, or Hawker aircraft, and a strong proficiency in troubleshooting and inspections. If you are a dedicated professional with a passion for aviation and a track record of excellence in aircraft maintenance, we want to hear from you. Job requirements: High School Diploma/GED. Valid FAA Airframe and Powerplant (A&P) license. 5+ years of demonstrated experience with Falcon, Gulfstream, or Hawker aircraft. Excellent problem-solving abilities and attention to detail. Flexibility to work weekends and holidays, as required. Available to work second shift 12:00 pm - 8:30 pm Monday thru Friday OR Available to work weekend shift 6 am - 6:30 pm. (work 32 hours, paid 40 hrs) Job Type: Full-time Schedule Option 1: Three days per week Thursday, Friday, and Saturday working 12-hour shifts from 6:00 AM to 6:30 PM (36 hours per week). Option 2: Four days per week Monday through Thursday working 10-hour shifts (40 hours per week).

Job Description Job Title: Aircraft Mechanic (A&P Certificated) This position reports directly to the Lead Mechanic and is responsible for performing aircraft maintenance and repairs as assigned. Position Skills & Responsibilities: Must have an A&P Certificate Strong attention to detail Reports to assigned Lead Mechanic Performs maintenance and repairs in accordance with prescribed practices and procedures Completes paperwork as directed Keeps the shop work area clean and organized as directed. Fleet includes: 8 x Cessna 172's, 2 x Piper Singles (Warrior & Arrow), 2 x Piper Twins (Aztec & Apache), 1 x Cessna 421, 2 x Robinson Helicopters (R-22 & R-66) Contributes to a safe work environment by reporting workplace hazards Ensures compliance with all 14 CFR part 91/141 regulations Experience requirements: Must be able to read, write, understand, and speak English Previous Robinson Helicopter maintenance experience (R-66 preferred) Must have knowledge of Federal Aviation Regulations Ability to work in confined spaces Ability to stand for long periods of time Ability to lift up to 75 lbs., climb ladders, and maneuver around aircraft Must be able to pass a company background and drug test Work Environment: Flight line and hangar at times in inclement weather Work around chemicals, solvents, and paints EEO Statement: Vali, Inc. is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Job Posted by ApplicantPro

The Aircraft Maintenance Technician is responsible for all facets of the preventive maintenance and repair of airplanes to ensure aircraft are airworthy and all technical aspects are documented properly. Compensation: This is a non-exempt position compensated at $41.00 per hour for the first year of employment, consisting of a $37.00 base rate plus a $4.00 A&P license premium. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned from time to time. Performs tasks associated with meeting aircraft at transit stations, including checks on aircraft maintenance logs, and responding to discrepancies entered in the logbook Performs routine and non-routine maintenance on aircraft References all Maintenance Manuals- Illustrated Parts Catalog, Structural Repair Manual, Component Maintenance Manuals, and the wiring diagrams to perform work on aircraft Completes required paperwork accurately using procedures set forth in the General Maintenance Manual (GMM) Uses only approved and certified hardware, parts, and equipment to be installed or used on aircraft Maintains Amerijet facilities and equipment as directed by the Leadership team Upholds safety and security awareness of Team members and assets Obtains and maintains special qualifications such as Quality Control RII, Airworthiness release, taxi run up, CAT III authorization, and Reduced Vertical Separation Minimum (RVSM). Assures that work is accomplished in the best workmanship manner and that an airworthy condition exists on all work performed by them. Notifies their leader immediately of any condition that may arise that could present a problem of parts, materials, airworthiness or workmanship. Has sufficient hand tools to perform his duties as required Is responsible to the Director of Maintenance for the accom plishment of all work assigned to him in accordance with policies and procedures established by Amerijet, Manufacturer and the FAA. Technician may be required to instruct less experienced employees and shall be responsible for the work of any unlicensed technician working with him. The Director of Quality Control may delegate the licensed technician for the Clearing and Signing-Off of Items that were inspected by him. The technician must assure that in clearing any item within the inspection category, he has not in any way performed or accomplished the subject work. Other duties as assigned Minimum Qualifications, Skills, Education and Experience: High School Diploma or General Education Development (GED) Diploma Valid Federal Aviation Administration (FAA) Airframe and Powerplant Certificate Two or more years of experience working as an aircraft maintenance technician. Preferably Boeing 767/757/777 qualified with certification and training records. Ability to drive tugs, trucks, taxi aircraft, lift trucks, snorkel lift, boom lift and tractor and/or other maintenance vehicles Familiarity with accessing online aircraft manuals Ability to communicate effectively, in both oral and written communication Ability to frequently crawl, bend, kneel, climb, stoop and work in confined spaces Ability to work under pressure in a team environment Possess and maintain a valid Driver License and a driving record from the state of your primary residence that meets Amerijet's insurance standards. Ability to remain alert to moving vehicles, aircraft and situational awareness Available for travel Must be able to acquire and maintain a valid Security Identification Display Area (SIDA) Badge Depending on location, may need to acquire and maintain a United States Customs Clearance Possess and maintain a valid Driver License and a driving record from the state of your primary residence that meets Amerijet's insurance standards Willingness to work 8-hr or 10-hr shift covering 24/7 Legally eligible to work in the country in which the position is located Preferred Qualifications and Skills: Experience in Avionics electronic systems. Have B767 taxi-run up qualifications. Understanding of wiring diagrams and schematics JOB PERFORMANCE STANDARDS Regular attendance and punctuality Need to work flexible hours and be available to respond on short notice Well-groomed and able to maintain a professional appearance Must be an appropriate organizational fit for the Amerijet culture, that is, exhibit the Amerijet values Promote Amerijet's #1 value of safety as a Safety Ambassador, supporting Amerijet's Safety Management System (SMS) components, Safety Policy, and behavioral standards Identify safety concerns, issues, incidents, or hazards that should be reported and report them whenever possible and by any means necessary including JetBlue's confidential reporting systems (Aviation Safety Action Program (ASAP) or Safety Action Report (SAR)) Adhering to all applicable laws, regulations (FAA, OSHA, DOT, etc.) and Company policies, procedures, and risk controls Upholding Amerijet's safety performance metric goals and understanding how they relate to their duties and responsibilities Consistently follows Company policies and procedures (including governmental and safety) and departmental Standard Operating Procedures Equipment: Computer and other office equipment Obtain tools listed on the Minimum Tool List within thirty (30) days of employment Operate lift trucks, snorkel lift, boom lift and tractor after attending training Issued reflective safety vest, ear protection and other Personal Protective Equipment (PPE) Ability to use handheld two-way radios, headsets and/or phone Supervisory Responsibilities: This position will not have direct reports but will require overseeing shift activities and providing training for new team members. The employee must possess good interpersonal and communications skills, be able to effectively work with others, respond to questions from managers and co-workers. Physical Activities and Requirements of the Position: The employee is regularly required to stand, frequently required walk, use hand to finger, handle or feel; reach with hands and arms; climb and balance; stoop, kneel, crouch or crawl; talk and hear. Ability to lift and/or move up to 50 pounds; specific vision abilities required by this job include close vision. Required to work in confined spaces. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit; stand; walk; use hands to finger, handle or feel; and reach with hands and arms; move about the facility. Must be able to work well under pressure and in extreme climatic conditions. This position may require limited travel incl. outside of the USA. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: Exposed to high levels of noise, dust, vibration and chemical fumes. Able to lift 50 pounds without mechanical assistance. Able to bend, twist, squat and lift. Able to access and work in all areas of the aircraft, including confined areas. Able to climb on ladders and platforms and work at heights up to fifty feet from the ground. Able to work in extreme climatic conditions. Acknowledgment: The above statements are intended to describe the general nature of work performed in this position. These statements are not to be construed as an exhaustive list of all responsibilities, tasks, and skills required of an employee in this position . Amerijet International Airlines, Inc. reserves the right to request that other tasks be performed when warranted (for example, by emergencies, changes in personnel or workload, corporate reorganization, or technical development). Amerijet International Airlines, Inc. also reserves the right to revise this job description. AAP/EEO Statement: Amerijet International Airlines, Inc. is an equal opportunity employer and will consider all qualified applicants without regards to race, color religion, national origin, sex, sexual orientation, age, disability, veteran status or any other protected factors under federal, state or local law. Any applicant requiring assistance with our online application process or who needs accommodation for the application process due to a disability, should send an e-mail to ********************. Legal Notices to All Applicants: EEO is the Law Employee Rights Under The Family and Medical Leave Act Employee Polygraph Protection Act E-verify Participation DOJ Right to Work Florida Law Prohibits Discrimination

Working Title: AIRCRAFT MECHANIC - 42002982 Pay Plan: Career Service 42002982 Salary: $63,240.06 - $71,300.32 Total Compensation Estimator Tool AIRCRAFT MECHANIC FLORIDA DEPARTMENT OF AGRICULTURE AND CONSUMER SERVICES FLORIDA FOREST SERVICE * OPEN COMPETITIVE OPPORTUNITY* CONTACT: Mark Wilkinson ************** MINIMUM REQUIREMENTS: Certification as an Aircraft Mechanic by the Federal Aviation Administration with Airframe and Powerplant Ratings. NOTE: ALL POSITIONS WITHIN THIS CLASS REQUIRE POSSESSION OF A VALID DRIVER LICENSE. * ATTENTION CANDIDATES* To be considered for a position with the Florida Department of Agriculture and Consumer Services: * All fields in the Candidate Profile must be completed (an attached resume is not a substitution for the information required on the candidate profile). * Work history, duties and responsibilities, hours worked, supervisor, and formal education fields, etc. must be filled out to determine qualifications for this position. * Responses to Qualifying Questions must be verifiable in the Candidate Profile. The Florida Department of Agriculture and Consumer Services values and supports employment of individuals with disabilities. Qualified individuals with disabilities are encouraged to apply. ADDITIONAL REQUIREMENTS: Occasional to moderate travel required. Position may respond to emergencies, including natural disasters or other type incidents requiring travel, as needed. NOTES: To maintain fairness and integrity, applicants are required to provide honest and authentic responses during all stages of the evaluation and selection process. Applicants must rely on their own personal knowledge, thoughts, and impressions. A candidate's use of Artificial Intelligence (AI) tools to answer qualifying questions or participate in interviews will be taken into consideration when determining qualification for the position. Tools provided. JOB DUTIES: This is a highly responsible technical position requiring a skilled aircraft mechanic who holds a current Airframe and Powerplant License. Certification by the Federal Aviation Administration (FAA) authorizes maintenance and repair on modern sophisticated aircraft and turbine powered helicopters. Performs maintenance, preventive maintenance, rebuilding and alterations on assigned reciprocating engine aircraft and turbine engine helicopters as prescribed by applicable Federal Aviation Regulations; performs scheduled inspections on assigned aircraft; research files for applicable airworthiness directives and complies with them using computers, microfiche and paper manuals. Completes necessary inspection forms and entries into logbooks and computer records; requests parts to be ordered in a timely manner. Maintains workspace in a safe, neat and orderly manner. Coordinates with the supervisor and pilots in analyzing reported malfunctions of aircraft and assists or performs the necessary repairs or adjustments to these discrepancies. Deploys to field locations as necessary to provide mechanical, fuel and helibase support to deployed aircraft. Performs routine and emergency maintenance and repairs to maintenance facilities and ground support equipment. Assists with building and ground maintenance, administrative tasks, property inventory, etc., as needed. Performs other duties as assigned. The Following Special Benefits for this Position Include * Annual Boot Allotment * Annual Uniform Allotment * Personal Protection Equipment (PPE) Provided The Benefits of Working for the State of Florida Working for the State of Florida is more than a paycheck. The State's total compensation package for employees features a highly competitive set of employee benefits including: * Annual and Sick Leave benefits; * Nine paid holidays and one Personal holiday each year; * State Group Insurance coverage options, including health, life, dental, vision and other supplemental insurance options; * Retirement plan options, including employer contributions (For more information, please visit *************** * Flexible Spending Accounts; * Tuition waivers; * And more! For a complete list of benefits, visit ***************************** For an estimate of the total compensation package for this position, please visit the "Total Compensation Estimator Tool" located above under the "Posting Closing Date." SPECIAL NOTES: The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

Job DescriptionAre you eager to be part of an innovative team in the aviation industry, transforming the way we approach aviation technology?Our client stands as a prominent figure in the realm of aircraft window design, manufacturing, and the production of composite parts at their cutting-edge facility. Boasting ISO 9001:2015 / AS9100D certification, they specialize in aerospace window/windshield composite intricacies, sheet metal wing spars, and fuselage assemblies.They are currently on the lookout for a Regional Repair Sales / Aircraft Window Technician possessing an A&P License in locations including Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC.What's in It for You:Salary: $45,000-$60,000 annual bonus, potential for substantial monthly incentives Position Type: Permanent - Full-time. Benefits: Comprehensive package including Medical, Dental, 401k, Disability, Company-provided life insurance, and FSA.A Glimpse into the Life of an Aircraft Technician / A&P Mechanic:As the Aircraft Technician / A&P Mechanic, your primary mission is to provide aircraft window services to our existing clients while expanding our customer base and sales within your designated Regional Market. Your responsibilities include inspecting aircraft windows, assessing defects for airworthiness, repairing scratches, pits, and other window damage, as well as removing and installing replacement windshields and windows.Key Responsibilities: Removing existing windows. Preparing and installing new windows. On-call 24/7 to respond to customer requests for emergency AOG (Aircraft on Ground) services. Utilizing an orbital sander with various grits of sandpaper to restore damaged areas. Reviewing, interpreting, and applying technical data relevant to your tasks. Managing the acquisition of purchase orders from customers as per the provided quotes. Coordinating service schedules with aircraft owners/operators and maintenance managers. Completing and submitting billing information and evaluation forms to our headquarters in Wichita, KS. Providing the necessary airworthiness documents to customers upon job completion. Traveling as required to customer locations via ground transportation, air travel, or airlines. Compiling weekly expense reports detailing costs for gasoline, entertainment, and customer relations. Signing off on all work orders and maintaining part traceability records. Conducting daily visits and/or phone communication with both current and potential customers. Developing and expanding sales in the assigned Regional Market. Seeking guidance and direction as needed for your duties. Keeping your supervisor/manager informed of the status of your work. Reporting problems and potential issues to your supervisor/manager as soon as possible. Maintaining a neat and orderly work area. Presenting a well-groomed appearance suitable for the role and context. Respecting the confidentiality of company, customer, and personnel information. Performing additional duties and tasks as assigned by your supervisor. Assisting and training other employees as required. Qualifications: Education: High School Diploma/General Education Degree (GED). Experience: Preferred sales experience, 1 year of orbital sanding experience preferred, auto body experience preferred, previous aircraft experience preferred, A&P license or AMT certificate preferred, sales experience preferred. Technical Skills: Proficiency in using various measuring devices, strong mechanical aptitude, ability to read and interpret blueprints (preferred), ability to read and interpret technical manuals. Problem Solving/Decision Making: Ability to read and comprehend mechanical and technical manuals, applying them to practical field situations. Capability to work independently and communicate effectively with both internal and external customers, delivering exceptional customer service in a timely manner. Essential Job Functions/Physical Demands: The physical demands encompass standing on wings, moving in and out of cockpits, and working inside and outside aircraft. Travel is a requirement, with working hours ranging from 2 to 12 per day depending on demand. Ability to stand and/or sit for 8 hours a day. Ability to lift/carry weights of up to 70 lbs. Ability to twist, bend, and stoop for 8 hours a day. Ability to pinch and grip various tools with fingers and hands, using pushing and pulling motions for 8 hours a day. Ability to reach for 8 hours a day. Clear and effective communication skills. Proficiency in understanding and following work orders and process specifications. Capability to handle buffing and polishing tools for 8 hours a day. Comfort with climbing up and down ladders. If you're intrigued by the Aircraft Technician / A&P Mechanic role in Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC, seize the opportunity today!This job opportunity is presented by Total Aviation Staffing, LLC, an Employment Agency providing aviation staffing services.

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.

Regular PRIMARY FUNCTION The Aviation Mechanic performs a full range of airframe and engine maintenance, repairs, modifications, inspections and servicing of aircraft in accordance with approved methods, techniques and practices and certifies accomplished work. This position is a Skillbridge opportunity for transitioning military personnel looking for civilian opportunities to start a fulfilling career. We have locations in the following areas: Kirtland AFB, NM, Cannon AFB, NM, Birmingham, AL, Fort Rucker, AL, Hurlburt Field, FL and Eglin, FL. ESSENTIAL FUNCTIONS * Perform Aircraft Maintenance IAW instructions/drawings * Troubleshoot systems as required to meet customer needs * Document maintenance as per Quality Assurance (QA) and established regulatory requirements. * Maintain a high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. Perform rotating break room cleaning duties. * Perform regular Foreign Object Damage (FOD) walks. * Comply with processes and procedures as per DHS/Department of Defense (DOD) documents and publications. * Maintain control tools. Report missing, lost, found, or unattended tools to the supervisor. Inventory and inspect tools on a regular basis and replace worn or broken tools. * Comply with safety rules and regulations while performing day to day maintenance. Promptly report all accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. * Use Government computer system to access various technical references for airframe repairs and Government training requirements. * Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, ventilation, and heating systems. * Repair, replace, and rebuild aircraft structures and functional components including rigging, surface controls, plumbing, and hydraulic units, using hand tools, power tools, machines, equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. * Troubleshoot engines and systems and use Federal Supply systems. * Replace or repair worn or damaged components, such as alternators, fuel controls, fuel pumps, oil pumps, engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment. * Remove engines and gearboxes from aircraft, using hoist or forklift truck. * Disassemble and inspect airframe and other components for wear, cracks, security, or other defects. Repair or replace defective parts then reassemble and install in aircraft. * Perform preflight, thru-flight, and post-flight maintenance inspections. * Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. * Perform jacking and towing of aircraft. * Enter in the maintenance records description of the work performed and verifies the work was performed satisfactorily. * Service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition. * Research the technical library and other applicable technical documentation (such as * manufacturers' and DHS/DOD maintenance manuals, service bulletins, engineering and technical data) to determine feasibility and method of repairing or replacing malfunctioning or damaged components. * Perform progressive, isochronal, phase, periodic, and other hourly or calendar inspections. * Examine engines for cracked cylinders and oil leaks. * Listen to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves. Inspects jet engines and components for cracks, corrosion, FOD, burned areas, distortions, security, warping, wear, and missing segments. * Inspect jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks. Tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. * Perform full system checkouts and complete servicing on all aircraft systems. * Provide technical direction to Aircraft Mechanic Helpers and Aircraft Workers. * Other duties as assigned SUPERVISORY RESPONSIBILITIES This position does not have direct reports. KNOWLEDGE, SKILLS, & ABILITIES: * May require knowledge of and experience performing maintenance on the following aircraft: UH-60 A/L, UH-60 M, AH 64 D, AH-64E, CH-47 F, MC-130J, HC-130, C-130, C-26, T-38, CV22, V22. * Must be capable of carrying items up to 40 pounds. Heavier items must seek assistance of other workers or weight lifting devices * Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. * Must be capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. * Ability to read and interpret all aircraft instruments. * Use special test equipment and tools. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Ability to write routine reports and correspondence * Interpersonal skills are necessary to work effectively and cooperatively with all levels of management and staff. Will also routinely interact with external contacts such as customers, vendors, suppliers, shipping companies, etc. Must represent Yulista Aviation, Inc. in a professional manner at all times. * Must be trustworthy - will handle confidential information routinely * Ability to use general office equipment such as fax, phone, copier, scanner, printers, etc. * Ability to follow a process. * Strong professional customer service skills, including active listening, prompt service and follow-up. * Analytical skills with the ability to evaluate data and consider decision impact across multiple areas. * Strong decision analysis and problem solving skills; ability to draw conclusions and justify decisions. Must be able to communicate issues to management. * Ability to learn and understand corporate policies and procedures and how they relate to Yulista Aviation, Inc.'s goals. * Ability to perform basic mathematical computations * High degree of self-motivation and the ability to work independently * Ability to multi-task QUALIFICATIONS: * High School Diploma or Equivalent with 4 years' experience with 2 years using military standards and specifications * Knowledge of commonly-used concepts, practices, and procedures within the field required. * Strong communication skills * Ability to pass a drug and background screening * Must be able to obtain and maintain a government security clearance PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SAPTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Put your skills to the test by pushing the boundaries of what's possible. From global defense to sustainment and modernization to mission readiness, your experience and ability will make it a reality. Our programs are built on equal parts of curiosity and collaboration. Our combined effort means our customers can connect and defend millions of people around the world. With Northrop Grumman, you'll have the opportunity to be an essential part of projects that will define your career, now and in the future. Northrop Grumman is seeking experienced personnel with P-3 aircraft structures mechanic background to support back shop maintenance program with Customs and Border Protection (CBP) in Jacksonville, FL. The CBP P-3 fleet consists of Airborne Early Warning (AEW) and Long-Range Tracker (LRT) high-endurance, all-weather, tactical turbo-prop aircraft. The AEW aircraft are utilized primarily for long-range patrols along the entire U.S. border, and in source and transit zone countries. The LRT aircraft are used to intercept, track airborne and surface threats in source and transit zone countries. The P-3 aircraft are equipped with state-of-the-art, highly sophisticated sensor equipment, i.e., radar, electro-optical and infrared (EO/IR) detecting systems. Are You ready to put your experience to work here at Northrop Grumman? If so, we need you to join our team as a P-3 SCA Aircraft Mechanic I or II. This position is located in Green Cove Springs, FL. This is a Service Contract Act position. This position will require you to work different shifts as required by the program needs: Days, Nights or Weekends. Your duties will include: Performs a variety of Depot Level operations to assemble and repair major aircraft structures such as primary flight controls, secondary flight controls, fuselage panels, longerons, stringers, formers, and structural subassemblies that include engine cowl panels and shrouds. Aligns parts on jigs using templates and fixtures Performs such part-fitting operations as filing, sawing, burring, crimping, trimming, framing, riveting, drilling, and reaming Measures parts with micrometers and calipers to verify dimensions May modify incomplete and complete assemblies to incorporate changes to structure May monitor and verify quality in accordance with statistical process or other control procedures Plans, lay's out, fabricates, assembles, install and repairs both internal and external aircraft structures at the Depot level Break down and build-up of main and nose tire and wheel assemblies Assemble aircraft structures and associated components with the aid of jigs and fixtures by drilling, filing, filling, honing, reaming, counter-sinking, dimpling, burring and fastening Perform close tolerance assembly operations such as: shimming, fitting, trimming, and aligning where variances may occur considerably from one assembly to another as with fairings and the mating of major structural assemblies Effectively communicate, vocally, by handwriting and email with other employees, members of supervision, and others, as required in their duties Document maintenance and repair actions, equipment status tags, logs, parts requests, etc. Perform assigned duties without burden due to weather or physical location and conditions. Order parts, check stock, tools, materials, and equipment as required to perform assigned duties. Responsible for complying with all rules and regulations concerning health and safety, tool control, FOD control. Basic Qualifications: This position may be hired as a Level I or Level II based on candidate experience: 1. Level I: A minimum of 4 yrs of structures experience on P-3 or similar platform (C-130) and a High School diploma. Level II: A minimum of 8 yrs of structures experience on P-3 or similar platform (C-130) and a High School diploma. 2. FAA Airframe Certificate or FAA Powerplant Certificate. (or ability to obtain quickly). 3. Ability to obtain/maintain a Department of Homeland Security CBP Background Investigation; CBP Background Investigation is required to start. Preferred Qualifications: 1. FAA A&P Certificate 2. 10 or more years' experience supporting P-3 or similar platform (C-130) in structural repair, fabrication, modification and installation of sheet metal parts, items and assemblies. 4. Familiarity with the Naval Aviation Maintenance Program (NAMP) or equivalent. 5. Current CBP Security Credentials. Primary Level Salary Range: $30.80 - $32.50Secondary Level Salary Range: $32.64 - $34.50The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Let your career take off with PSA Airlines About PSA PSA Airlines, a wholly owned subsidiary of American Airlines, offers unparalleled opportunities for growth and professional development. We value teamwork, diversity, and inclusivity and strive to create a safe, respectful, and happy work environment for our more than 4,000 employees. Our company culture, known as The PSA Way, is our foundation for operation and fosters stability, growth and a focus on the future while always placing safety at the forefront of everything we do. We are driven in our goals and achievements, eager to be better. We are reliable to one another and accountable for our actions. And we are caring in our daily interactions, with teammates, colleagues, and customers. Join our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. Benefits PSA offers the benefits you expect from a company focused on excellence. All eligible team members enjoy a comprehensive benefits package, including: Travel privileges on the American Airlines global network A generous vacation plan designed to let you enjoy your travel perks 401(k) with company match American Airlines Group (AAG) profit-sharing and bonus opportunities A choice of three health plan options, all with nationwide coverage with the UnitedHealthcare Choice Plus network Premium dental coverage Vision plan options provided, including a plan that covers both glasses and contacts every year Benefits navigation services, including finding a doctor, scheduling an appointment, understanding your medical bills, and free second opinion services Access to 24-hour virtual urgent care services Family planning and fertility treatment LGBTQ+ friendly services including gender affirming care, assistance finding knowledgeable providers, and family planning Company-paid Life and AD&D Insurance, Short-term and Long-term Disability, and supplemental life insurance options for spouses and dependent children Flexible Spending Accounts for both Health Care and Dependent Care services Comprehensive Employee Assistance Program providing a range of services, including 5 free in-person sessions with a health care professional Responsibilities Position Summary As the Airframe and Powerplant (A&P) Technician, you will impact PSA Airlines' business growth by conducting aviation repairs and services that allow for operations to be on time. By executing maintenance procedures in compliance with Federal Aviation Regulations and company standards, you are ensuring safe and reliable flights. Job Responsibilities Will perform tasks necessary to comply with Federal Aviation Regulations and accept the responsibility for work performed by themselves and/or in conjunction with others and sign for same on the Company's approved forms. Keep work areas clean. Return all equipment and tools to assigned areas. A&P Technicians will report all inoperative or faulty equipment to the Maintenance Supervisor or Lead Mechanic in charge. Work will consist of and include any and all phases of repair and maintenance of aircraft with the aid of the employee's own tools, specialty tools provided by the Company, the use of test equipment, and Company-supplied technical manuals. In certain cases, and A&P Technician may be authorized to perform required inspection items and assist in Company training programs. Will at the commencement of each repair or inspection initiate the proper documentation. Parts tags will include a complete description of the discrepancy on all removed parts. Determine if the work to be performed is a Required Inspection Item. Verifying, through proper documentation, that any part installed on any aircraft or component is approved for that aircraft or component and has been visually inspected and is free of damage or contamination. Assure that hangar workshops and other areas assigned are maintained in an orderly manner. Responsible for the Company's Security and Safety Management System (SMS) and associated Safety Risk Management and Safety Assurance outputs. Perform other duties as assigned by the Maintenance Supervisor through the Lead Mechanic. Position Specifics Qualifications Current FAA Airframe and Powerplant certification. High school diploma or equivalent. Valid, state-issued Driver's License. Capable of using respirators and other personal protective equipment including eye and hearing protection. Must possess or have ability to obtain a U.S. Passport or equivalent within 90 days of starting position. Must be able to speak, read, and write in English. Must be able to demonstrate authorization to work in the U.S. Preferred Previous experience with CRJs. Additional Information Work Environment: This job operates inside a climate controlled building. This role routinely uses standard office equipment such as computers, telephones, photocopiers, facsimile machines and filing cabinets. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms. Security Clearance: All employees are required to pass the fingerprint-based criminal history records check (CHRC) per 49CFR1542.209. AAP/EEO Statement: PSA Airlines is an equal opportunity employer; qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, age, disability, genetic information, protected veteran status or any other characteristic protected by law. Other Duties: Please note this job description is not designated to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Aircraft Mechanic - Join the Team at Flightstar in Jacksonville, FL Take Your Skills to New Heights We're looking for experienced and motivated Aircraft Mechanics to join our dynamic team at Flightstar, an MRO Holdings company, located in sunny Jacksonville, Florida. In this role, you'll perform advanced-level maintenance-identifying, removing, and installing critical aircraft components and servicing engines and accessories. Your work ensures each aircraft meets the highest standards of safety, airworthiness, and customer satisfaction. You'll follow precise instructions and industry safety protocols, knowing your expertise keeps our skies safe and our clients confident. Why Make the Move to Florida? 🌞 Year-round sunshine 💰 No state income tax - more money in your pocket ✈️ Thriving aviation industry with long-term career potential 🏖️ Access to world-class beaches, outdoor adventures, and entertainment Position Requirements Qualifications FAA Airframe & Powerplant (A&P) Certification preferred 5 years of hands-on aircraft maintenance and repair experience strongly preferred Solid knowledge of airframe/powerplant systems, inspection procedures, and troubleshooting Able to work independently and thrive in a team environment Strong communication and critical-thinking skills Key Responsibilities Perform advanced maintenance and repairs to meet FAA and customer standards Remove, install, and service aircraft components, engines, and accessories Read and interpret maintenance manuals and safety documentation Conduct inspections and identify structural materials (aluminum, composite, etc.) Replace filters, conduct lubrication, perform leak checks Research and follow approved repair procedures for discrepancies Use Flightstar's ERP system to track parts, verify alternates, and check compatibility Work safely with hand tools and technical equipment in varying physical positions Follow all safety protocols and wear appropriate PPE Train and support apprentices as assigned Maintain accurate documentation: work orders, task cards, logs, etc. Apply working knowledge of ATA codes, airframe zones, and aviation standards Perform engine and accessory servicing, aircraft jacking, and leveling Take on additional duties as needed to support team success What We Offer Competitive salary based on experience Comprehensive benefits package (medical, dental, vision, 401(k), and more) Relocation assistance Opportunities for continued education and career advancement A collaborative, inclusive, and safety-first work environment Additional Information Decision-Making Scope Independent Decisions: Perform day-to-day responsibilities in alignment with safety and company procedures Requires Approval: Time-off requests and other exceptions requiring leadership input Position Profile Requirement Required Preferred High School Diploma or GED ✠FAA A&P Certification ✠Airframe Familiarization (FAM) Certs ✠Valid Driver's License ✠Aviation Experience (18+ months or A&P program graduate) ✠Proficiency in English (read, write, speak) ✠Basic computer skills for ERP system and technical manuals ✠Physical capability for ladder use, lifting, kneeling, etc. ✠Working Conditions Safety is a top priority. All team members must work in compliance with safety regulations and Flightstar's SMS (Safety Management System) culture. PPE Requirements: Safety glasses (including prescription, if applicable) must be worn as needed. Ready to take your aviation career to the next level in a place where you can grow, thrive, and enjoy life outside of work? Apply now and join a team that's elevating industry standards-one aircraft at a time. FLSA: Non- Exempt Department: Maintenance Job Title: Aircraft Mechanic Reports To: Assigned Manager or Supervisor DOT/ NON- DOT: Covered Schedule: 1st and 2nd shift available

PENDING CONTRACT AWARD TASK DESCRIPTION: Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Task Requirements: Performs aircraft maintenance functions of the Line, Corrosion Control, Tool Room and Aircraft Organizational Level maintenance and flight testing support Scheduled and unscheduled maintenance support for assigned MH-60 aircraft Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, surface finish removal, corrosion control, preservation/depreservation services Maintain aircraft and aeronautical equipment to continuously support the assigned SAR readiness posture outlined in in the activities SAR Plan and daily flight schedule. Aircraft maintenance action documentation via logs, records, forms, and electronic means Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO). Read and interpret manufacturers' maintenance manuals, military technical manuals, service bulletins, technical data, engineering data, blueprints, manufacturers' drawings, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Flight Line operations/functions at detachment locations as required Confined space operations to include fuel cell entry Support Equipment (SE) operation and inspections Aircraft launch and recovery Aircraft inspections Aircraft movement Support services Corrosion Control Preservation and depreservation General aircraft maintenance Technical Directive compliance and modifications Maintain Aircraft, Engines, and SE Logbooks Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Prioritize workloads and lead teams through more complex aircraft relevant tasks Other duties as assigned Preferred Qualifications: Seven or more years of rotary wing maintenance experience Qualified to certify MH-60 aircraft Safe-for-Flight Naval Aviation Maintenance Control Management course (C-555-0053) Collateral Duty Quality Assurance Representative (CDQAR) for Airframes, Power Plants and Electrical Systems Collateral Duty Inspector (CDI) for Line, Corrosion Control and Avionics Systems Quality Assurance Safety Observer (QASO) Ammunition & Explosive handling qualifications Vibration Analysis Operator / Interpreter Tire and Wheel Hydraulic Contamination Plane Captain Landing Signal Enlisted (LSE) Basic Qualifications: Individual (I) Aircraft Maintenance Qualification Three years of rotary wing maintenance experience Must be able to work 1st, 2nd, 3rd and weekend shift or as required Must be able to work flexible schedule Mon-Fri, Sun-Thur and Fri-Mon or as required Must be able to provide maintenance support for actual SAR missions within two hours of notification for weekends, holidays, and before/after normal services hours as required Shall be able to travel in support of detachment operations as required Must be eligible for a Common Access Card (CAC) Satisfactory completion of T3/T3R National Agency Check Local Records Check and Credit (NACLC) or Access National Agency Check with written Inquiries (ANACI) resulting in eligibility for a SECRET clearance shall be required of all employees All other FTEs requiring access to Department of Navy (DON) IT systems or access to CUI will require a Favorable T3 investigation initiated by the Government GCA per 5510.30 series and NIMPSOMs and will be enrolled in Continuous Evaluation. All personnel will be vetted through the Contracting Officer Security Representative Must be able to climb ladders, raised platforms, and aircraft Must be able to use hand and power tools Must have dexterity to handle small parts Compensation $39.58/hour Other Compensation Employees will receive a minimum health and welfare fringe benefit of $2.65 for every hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees have a minimum of eleven paid holidays. After completing one year of service, employees will have two weeks paid vacation. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets