Aircraft mechanic jobs in Fontana, CA - 36 jobs

Metrea is a defense company dedicated to translating commercial innovation into solutions for the hardest problems in national security. With deep mission expertise, Metrea focuses on delivering effects as-a-service across a spectrum of domains including Air & Space, Electromagnetic & Cyber, and Synthetic. Metrea Management provides central services to eleven (11) global capability units via Operations, Solutions, Strategy, Legal, and Finance teams. Capability Unit Metrea Strategic Mobility (MSM) operates a fleet of Boeing KC-135R aircraft, offering an air-to-air refueling service that seamlessly, safely, and professionally integrates into military aviation training and operations. Position Summary To perform this job successfully, an individual must be able to perform each essential duty listed below satisfactorily. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions. Work Location Metrea Strategic Mobility Flightline 17301 Heacock St Moreno Valley CA 92551 Role and Responsibilities * Inspect mechanical components of the Boeing KC-135 to identify discrepancies. * Maintain and repair all systems of the Boeing KC-135 to include: * Major / Minor aircraft inspections. * Hydraulics System - Replace hydraulic components, bleed systems, and diagnose discrepancies. * Jet Engine - Inspection, engine control rigging, and basic maintenance. * Electrics - Use wiring schematics, trace ground, and power faults, and rectify component failures. * Minor Fuel system repair, replace seals, in tank fuel probes and fuel system components is a plus, but not essential. * Minor Sheet Metal repair, including minor riveting is a plus, but not essential. * Aero Repair - Repair, replacement, and rigging of flight control surfaces is a plus, but not essential. * Multi Point Refueling System experience is a plus, but not essential. * CFM56 2-B / F108 jet engine experience is a plus, but not essential. * Avionics - Guidance & Control / Radio Communications experience is a plus, but not essential. * Perform daily aircraft inspections, launch/recover, refuel / defuel, debrief aircrew, troubleshoot, and repair discrepancies, jack aircraft, tow, and operate all required GSE (Ground Support Equipment). * Follow all safety directives, maintenance procedures, and FAA regulations Remain current on all required training and certifications * Accurately record aircraft maintenance in the automated maintenance records system. * Flight-line driving. * All duties assigned. Skills and Experience Education: * High School Diploma or equivalent Experience: * 5+ years working with heavy commercial aircraft or any military airframe. towing, jacking, and hazardous material use, storage, and disposal. * Must have A&P, IA, engine run qualified, and an ASTM NCATT Aircraft Electronic Technician Certificate. * Proven and demonstrable attention to detail skills. * Excellent problem-solving skills, determining causes of errors and deciding on the course of action to solve. * Comprehensive understanding of company philosophy and processes. * Must be able to take initiative and work independently. * Excellent communication skills, the ability to read and understand the information presented in writing, diagrams, and schematics. Computer Skills: * Basic skills in Microsoft Office Suite Programs Our Culture Metrea's single core value "rooted in humility" is supported by four key attributes; entrepreneurial, systematic, discerning & over-deliver which combined; form our Teammate Firmware, our culture. These attributes are explored during the hiring process, when we grow our teams and continually support the growth of our culture. We are a hyper-collaborative, dynamically hierarchical organization united by a passion for what we do, and how we do it, who we do it with, and who we do it for. Benefits Health and welfare. Retirement plan eligibility. Work Authorization / Security Clearance The employee must be a US citizen. The employee must be able to hold and maintain a Secret Clearance Level. AAP/EEO Statement Metrea Special Management LLC (MAM) is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law. Position Type and Expected Hours of Work This is a Part-time position with typical working hours of Monday through Friday, 7:00 a.m. to 4:00 p.m. Hours and work shifts may change in accordance with department and business needs. Non-exempt employees may be required to work over 40 hours per week with approval from the department manager. Part-time non-exempt employees must obtain approval from the department manager before working over 29 hours per week. Hours and work shifts may change by department and business needs. Significant travel is required to carry out assigned maintenance tasks and air operations successfully. Travel Travel requirements are: Up to 50% away from home. Work Environment This job operates in a clerical, office setting. This role routinely uses standard office equipment such as computers, phones, photocopiers, and filing cabinets. Physical Demands This position involves daily physical activity such as walking, lifting, reaching overhead Reasonable Accommodations Statement To perform this role successfully, an individual must be able to perform the responsibilities outlined in this to a satisfactory standard. Reasonable accommodations may be made to enable qualified individuals with additional needs to perform the essential functions. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. The role, responsibilities and activities may change at any time with or without notice.

Metrea is a defense company dedicated to translating commercial innovation into solutions for the hardest problems in national security. With deep mission expertise, Metrea focuses on delivering effects-as-a-service across Aerospace, Electromagnetic & Cyber, Digital & Synthetic domains via its capability groups. Metrea also consists of six support groups (Operations, People, Finance, Legal, Strategy and Solutions) that guide the development of specific capabilities that Metrea's files (product, projects, programs etc.) leverage to achieve their targets. Group Overview Air Mobility Group (AIRMOB) is responsible for developing and delivering Metrea's aerial refueling (AAR) capabilities, ensuring the readiness and operational effectiveness of the tanker fleet. AIRMOB oversees fleet management, maintenance, and airworthiness, working to sustain and enhance refueling operations. It manages the integration of new processes and technologies, ensuring that tanker aircraft remain mission-ready through effective logistics, maintenance oversight, and regulatory compliance. By coordinating across various teams, AIRMOB ensures the fleet meets both current and future operational needs, supporting a range of specialized air mobility missions. Position Summary The Aircraft Maintenance Mechanic is responsible for successfully performing all facets of maintenance and documentation on KC-135R aircraft for private, commercial, Air-to-Air Refueling Operations. The Aircraft Maintenance Mechanic is also responsible for daily aircraft inspections in accordance with the approved Air Mobility (AIRMOB) processes. Role and Responsibilities Inspect mechanical components of the KC-135 to identify problems. • Maintain and repair all systems of the KC-135 to include: Hydraulics System - Replace hydraulic components, bleed systems, and diagnose defects. Avionics - Guidance & Control / Radio Communications. Jet Engine - Inspection, engine control rigging, and basic maintenance. Electrics - Use wiring schematics, trace ground, and power faults, and rectify component failures. Minor Fuel system repair, replace seals, in tank fuel probes and fuel system components. Minor Sheet Metal repair, including minor riveting. Aero Repair - Repair, replacement, and rigging of flight control surfaces. Major / Minor aircraft inspections. Multi-Point Refueling System experience is a plus, but not essential. CFM56 2-B jet engine experience is a plus, but not essential. • Perform daily aircraft inspections, launch/recover, refuel / defuel, debrief aircrew, troubleshoot, and repair discrepancies, jack aircraft, tow, and operate all required GSE (Ground Support Equipment). • Follow all safety directives, maintenance procedures, and FAA regulations Remain current on all required training and certifications • Accurately record aircraft maintenance in the automated maintenance records system. • Flight-line driving • All other duties assigned Skills and Experience Education: High school diploma or equivalent Experience: 5+ years working with the KC-135 aircraft, towing, jacking, and hazardous material use, storage, and disposal. Computer Skills: Proficient in Microsoft Office Suite products (specifically Word and Excel) Certificates and Licenses: A&P - Required license. Engine run qualified, and an ASTM NCATT Aircraft Electronic Technician Certificate. Valid Driver's License. Valid Passport Additional Eligibility Qualifications Must be able to accomplish all duties with little or no assistance. Must have good command of the English language; oral and written. Proven and demonstrable attention to detail skills. Excellent problem-solving skills, having the ability to determine causes of errors and deciding on course of action to solve. Comprehensive understanding of company philosophy and processes. Must be able to take initiative and work independently. Excellent communication skills, the ability to read and understand information presented in writing. Our Firmware Metrea's single core value, “rooted in humility,” is supported by four key attributes: entrepreneurial, systematic, discerning, and over-deliver. These attributes, combined, form our Teammate Firmware, our culture. We explore these attributes during the hiring process when we grow our teams and continually support the growth of our culture. We are a hyper-collaborative, dynamically hierarchical organization united by a passion for what we do, how we do it, who we do it with, and who we do it for. Benefits Medical insurance options Dental and vision insurance Retirement plan eligibility Parental leave Work Authorization / Security Clearance Employee must be a US citizen. Secret Security Clearance or the ability to obtain within 1 year of employment start date is preferred, but not required. AAP/EEO Statement Metrea Strategic Mobility, LLC is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law. Position Type and Expected Hours of Work This is a full-time non-exempt position with typical working hours of Monday through Friday, 7:00 a.m. to 4:00 p.m. Hours and work shifts may change in accordance with department and business needs. Non-exempt employees may be required to work over 40 hours per week with approval from the department manager. Work Location Metrea Strategic Mobility 17301 Heacock Street Moreno Valley, CA 92551 Work Environment This job operates in a maintenance facility. This role routinely uses standard equipment such as cold chisels, ground power units for aircraft, integrated maintenance information systems, lifts, metal cutters, power drills, rivet tools, screwdrivers, wearable computing devices, and protective headsets/earplugs. Travel Travel requirements may be up to 50% with at least 60 consecutive days working in India.

Essential Duties And Responsibilities Other duties may be assigned. Perform all necessary aircraft inspections including, but not limited to: Annual; 100- hour; 50- hour; oil changes. Maintaining aircraft maintenance records per the Code of Federal Regulations for each aircraft. Ensuring all aircraft are airworthy and safe for flight after inspections/repairs. Handling all aircraft line squawks promptly. Be reachable by Supervisor or CBU staff should maintenance need arise. If a maintenance need arises, fly to a specific location to assist a student or flight instructor. Maintain a supply stock of parts as needed for the aircraft. Maintain A&P and IA FAA currency requirements. Make timely reports to the Director of Maintenance on aircraft status. Have maintenance records readily available upon FAA request.

Our motto, "We are Ladies and Gentlemen, serving Ladies and Gentlemen", is evident in every interaction with our customers, co-workers, and team mates. We strive to find the best and brightest talent for each position within our organization, enabling the unique qualities of each individual to shine and compliment the entire team. Is the customer #1 with you? Are you a positive, upbeat person? Do you have an inner need to do things right in a timely fashion? Do you insist on working safely and efficiently? Are you known for your reliability and dependability? Do you have a burning desire to be the best at what you do? Are you excited to provide a level of customer service unrivaled by the competition? Do you enjoy working outside? The Aircraft Refueling Technician is responsible for providing efficient service for all internal and external customers by using excellent, in-depth knowledge of company procedures and proper ground handling of aircraft as well as communicating effectively with customers, pilots, and team members within the customer service department. Responsibilities and Duties Aircraft movement, placement, fueling, and storage Fuel movement- quality control, disposal, and paperwork Daily check and upkeep of crew cars and vehicles Facility maintenance and upkeep Customer service, promotion of services Monthly crew meetings Annual re-current training Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requirements Competencies Customer focus-naturally outgoing/extroverted Communicate with customers and employees in person, on phone, and through radio communications Must be able to operate a motor vehicle and be insurable by our insurance company (Requires clean driving record) Strong computer skills including Microsoft office products Basic mathematical knowledge Reporting Relationship This position reports to the Line Service Manager Work Environment This position works outside in all types of weather conditions and direct contact with both moving and non-moving aircraft. This position may be exposed to hazardous noise levels, chemicals, fumes, and machinery. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job, to include but not limited to: Must be able to lift 50 pounds Possible exposure to hazardous noise levels, chemicals, fumes, and machinery Outside work in all types of weather conditions Position may require bending, lifting, walking, stooping, squatting, gripping, and climbing a ladder Position Type and Expected Hours of Work This is a non-exempt position. This position includes shift work which requires working evenings and weekends, and on scheduled company holidays. Travel No travel is expected for this position. Education, Experience, and Eligibility Qualifications Customer service experience in the service industry preferred Prior aircraft ground handling experience is a plus High School Diploma Entry level position Ability to work evenings, weekends, and holidays Acceptable driving record Zero tolerance drug-free employer Benefits Our comprehensive package includes a matching 401k program, Paid Time Off (PTO), and Medical, Dental, and Vision coverage. We value your hard work and offer performance-based bonuses. AAP/EEO Statement Million Air is an Equal Opportunity/Affirmative Action Employer/Protected Veteran/Disabled Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this position. Duties, Responsibilities, and activities may change at any time with or without notice. Pay $16.50 - $18.00 | DOE

Subsidiary: SULLY-MILLER United Rock Products is one of the companies that operates within Sully-Miller Contracting Co., the Colas USA subsidiary that operates throughout Southern California. We are part of Sully-Miller Companies consisting of Sully-Miller Contracting Co., Blue Diamond Materials and United Rock Products. Each company supports the other. United Rock provides the aggregate, Blue Diamond Materials provides the hot and warm mix asphalt manufacturing, and Sully-Miller Contracting executes the projects. Mining of construction aggregates at United Rock Products in the San Gabriel Valley has taken place since 1916. Our top-rated 300-acre site is located in Irwindale, California, just 25 miles east of Los Angeles. Virgin aggregate material is processed into sand and gravel through cutting-edge crushing and screening operations. To learn more about United Rock Products visit ******************* Throughout Colas USA, we provide competitive pay, outstanding benefits, career advancement opportunities, professional education, and extensive training for every employee. We pride ourselves on upholding the highest standards of safety, environmental conservation, and ethical conduct as we strive to grow our infrastructure products and services through empowering and developing our people, fostering innovation, utilizing new technology, and maximizing vertical integration at all levels of the company's value chain. To learn more about the Colas USA Family of Companies, please visit ***************** United Rock Products, and the rest of the Colas USA Family of Companies, is part of the Colas Group, the worldwide leader in transportation infrastructure construction and maintenance. For information on our international network visit ************** Job Summary Maintains and repairs equipment, vehicles, and/or facilities used for carrying out the operations. Main Responsibilities * Examines and diagnoses problems, and repairs according to generally accepted methods. Discusses extensive or difficult in depth repairs with Foreman and/or Site Manager. * Performs routine scheduled maintenance as outlined by the Foreman and/or the Site Manager * Removes components for repair or replacement such as, but not limited to; motors, gearboxes, pulleys, bearings, rollers, conveyor belts, v-belts, pumps, screens, crushers etc. * Disassembles components, inspects parts for wear, and determines cause of failure. * Troubleshoots and repairs hydraulic systems, and components. * Inspects and replaces parts such as crusher liners, screen media, etc. * Overhauls or rebuilds serviceable components * Performs major welding and cutting -- must pass a welding/cutting test (certification strongly preferred). Skills * 5 years minimum experience or similar industry experienced preferred * Must have knowledge of welding material, welding properties, and various type of metals * Must have welding experience * Must be able to perform bracing, welding, arc-welding and cutting tasks * Must know how to use tools required for the job * Must be able to change crusher liners without guidance of the Foreman and/or Site Manager Physical Requirements * Ability to stand, sit, walk, bend, lift, stoop, kneel, twist, crouch, reach, balance, crawl, and climb * Good vision (naturally or with correction) * Able to lift 50 pounds on a routine basis * Able to work in wet and dry conditions and extreme heat and cold * Work in an environment that may include mechanical parts, airborne particles and moderate to loud noises requiring the consistent use of proper PPE * Ability to walk on uneven surfaces Colas Inc. and its subsidiaries are an Equal Opportunity Employer. For details on the specifics of this commitment, please click here to view the EEO document. If you are an individual with a disability and require a reasonable accommodation to: * to meet the requirements of the role in which you are applying * complete any part of the application process * access or use the online application process and need an alternative method for applying Please contact Colas Inc. at ************ or send an email to ***************************.

SummaryIn this role, you will work in a team environment to perform inspections, troubleshoot, and repair of aircraft and MRO (maintenance, repair and overhaul) of engines and all associated systems using, safe, cost-effective maintenance procedures. In addition, you will assist in aircraft, pylon and test engine modifications on Boeing 747-400 flying test bed.Job Description Essential Responsibilities Perform maintenance & modifications on Boeing 747- 400 flying test bed Jet engine module removal & installation, including performing various machining and repair operations, using hand tools, specialized tools, equipment and fixtures Perform sheet metal repair Complete all documentation in a neat and proficient manner according to company policies and procedures, as well as per FAR 145 requirements Install, inspect, test, adjust, or repair test engine and pylon Lay out installation of assemblies / systems in aircraft, according to blueprints and wiring diagrams Be able to understand and use maintenance manuals, illustrated parts catalogs, component overhaul manuals, engine manuals, service bulletins and airworthiness directives. Troubleshoot and perform aircraft system tests. Perform the highest quality of work consistently. Ability to fill out, parts tags, logbook, engineering log, component change log, routine and non-routine task cards and part requisitions correctly and with attention to detail. Knowledgeable in environmental safety policies and procedures. Operate cherry pickers, man lifts, and forklifts. Perform any other task as assigned by the Flightline Manager or Lead Technician Ability and willingness to work flexible and off-shift hours (including 1st, 2nd, 3rd shift, nights, weekends, and holidays) when business needs dictate Ability and willingness to travel to and support operations at offsite locations when business needs dictate. Ability and willingness to fly aboard an experimental aircraft including participation in development flight tests. Ability to meet all requirements of Zero Tolerance DOT/FAA Drug and Alcohol Testing Program. (14 CFR Part 120 and 49 CFR Part 40). Ability and willingness to work in an environment that is subject to changing climate conditions and moderate noise levels Capability and willingness of lifting a minimum of 50 pounds (with or without assistance) Ability and willingness to travel to remote locations Able to work at heights up to 80 feet Qualifications/Requirements High School Diploma / GED Valid FAA Airframe & Powerplant (A&P) License Minimum 4 years of related experience US Citizenship is required due to the following requirement: Ability to obtain and retain a U.S. DoD security clearance and Special Program access clearance. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics Two-year technical degree Demonstrated ability to train others Knowledgeable of FAR145 Repair Station Procedures Experience working on wide body Boeing aircraft Strong communication and people skills Ability to exercise good judgment in a team environment as well as in aircraft maintenance and safety Problem solving and organizational skills Ability to read and understand Company and Manufacturer Manuals Ability to perform all line maintenance functions unsupervised at any time The Salary Range for this position is 80,000 - 105,000.00. The Specific Salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings, and a 401k with Company matching, Life insurance options, Disability coverage, paid time-off, EAP, and more. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. #LI-TJ1 This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Energy: Forget about blending in. That's not our style. We're the risk takers, the trailblazers, the game-changers. We're not perfect and we don't pretend to be. We're raw, unfiltered, and a bit unconventional. Our drive is just like our athletes, unrivaled. The power is in your hands to define what success looks like and where you want to take your career. It's not just about what we do, but about who we become on along the way. We are much more than a brand here. We are a way of life, a mindset. Join us. A Day in the Life: As a Production Line Mechanic at Monster Energy, you'll be the driving force behind our high-octane production process. Your role is to maintain and repair our cutting-edge machinery and equipment, ensuring they roar to life in line with our dynamic manufacturing procedures. Your mission: achieve peak efficiency, deliver top-tier quality, and power through to meet our ultimate production goals. Get ready to unleash your potential and keep the Monster Energy flowing! The Impact You'll Make: Conduct routine maintenance checks on machines and equipment used in production. Install, diagnose, analyze, maintain, modify, repair, and/or rebuild a variety of plant and facility equipment. Perform preventive maintenance tasks, such as checking, cleaning, or repairing equipment to detect and prevent problems to ensure that machines continue to run smoothly and operate efficiently; basic electrical equipment problems such as changing fuses, buttons, and switches. Contribute significantly to the manufacturing process by ensuring product quality, safety, and efficient operations. Commit to safety and GMP (Good Manufacturing Practices). Examine manufactured products and identify faults or defects. Paying attention to details and practicing analytical techniques help improve productivity. Maintain accurate documentation for assignments, machine repairs, parts inventory, and maintenance logs. Assist production personnel in change-overs and set-ups. Provide consultation on correct maintenance and preventative measures to machine users. Utilize specific knowledge for a variety of skilled trades, including but not limited to, production and facility machinery and equipment, HVAC, plumbing, electrical, pipefitting, carpentry, utilities, etc. Who You Are: Prefer a technical degree or license in mechanical maintenance or related field of study. Additional Experience Desired: Between 1-3 years of experience in performing preventive maintenance, diagnostics, and repair. Computer Skills Desired: Microsoft Office ability to modify basic reports, documents, and spreadsheets in Word and Excel. Preferred Certifications: Electrical or mechanical engineering trade school. Monster Energy provides competitive total compensation. This position has an annual estimated salary of $27.00 -$36.00 per hour. The actual pay may vary depending on your skills, qualifications, experience, and work location.

Description: HYDRAULIC / WET KIT INSTALLS DIESEL MECHANIC Department: Fleet & Maintenance Classification: Full-Time, Non-exempt Reports To Fleet & Maintenance Director Position Summary Ecology Auto Parts, Inc. is currently seeking a skilled Diesel Mechanic (Level 2) with strong hydraulic systems experience, specifically in wet kit installations for PTOs (Power Take-Off units). The ideal candidate will demonstrate technical proficiency in diesel engine systems, hydraulic setups, troubleshooting, and safety standards in heavy-duty fleet environments. This role is essential to supporting Ecology's diverse fleet of trucks and trailers to ensure uptime, safety, and operational excellence. Responsibilities To perform this job successfully you must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. Perform professional installation of wet kits, hydraulic pumps, tanks, lines, valves, and PTO systems on Class 8 diesel trucks. Conduct diagnostics and repairs on hydraulic and pneumatic systems, including troubleshooting leaks, pressure failures, and mechanical malfunctions. Service, inspect, and maintain diesel engines, transmissions, brakes, suspensions, and electrical components in accordance with OEM standards. Collaborate with senior mechanics and management on build specifications and install configurations for various truck body applications. Ensure all hydraulic and mechanical work is completed to DOT safety standards and manufacturer guidelines. Maintain proper documentation of work orders, parts usage, and service notes in the maintenance system. Use hand tools, diagnostic software, welding equipment, and hydraulic testing gauges as necessary for repairs and installs. Monitor inventory of hydraulic parts and recommend restocking when needed. Support other maintenance operations including preventative service, emergency repairs, and inspections as assigned. Participate in safety meetings, training programs, and toolbox talks to promote a safe and compliant working environment. Requirements: Qualifications/Knowledge/Critical Skills · High school diploma or GED required; technical/vocational school certification preferred. · Minimum 3+ years of experience as a diesel mechanic, with at least 1 year specializing in hydraulic systems and wet kit installs. · Knowledge of PTO systems, hydraulic pump setups, tank configurations, and control mechanisms. · Must have own tools and experience using diagnostic equipment and power tools. · Working knowledge of diesel engine systems (Cummins, CAT, Detroit, etc.), DEF systems, electrical diagnostics, and air brake systems. · Ability to read and interpret technical manuals, wiring diagrams, and hydraulic schematics. · Proficient with Microsoft Office and Fleet Maintenance software is a plus. · Must hold a valid driver's license; Class A or B license preferred but not required. · Ability to work independently and manage time effectively in a fast-paced shop environment. Physical Demands/Environmental Factors · While performing the duties of this job, the employee is regularly required to stand, bend, kneel, crawl, and lift tools or parts. · Must frequently lift and/or move up to 75 pounds. · Work involves exposure to dust, noise, grease, and diesel fumes. · May be required to work outdoors in varying weather conditions. · Must adhere to all company safety protocols including PPE usage and equipment lockout/tagout procedures. Compensation The Diesel Mechanic (Level 2) position offers an appealing compensation package, with a competitive hourly wage range of $25.00 to $37.00 per hour (DOE). In addition to the financial components, we provide a comprehensive benefits package, including medical, dental, and vision insurance, a 401k plan with employer matching, generous paid time off, and life insurance coverage. The final compensation will be contingent upon the candidate's relevant experience, qualifications, and skills, reflecting our commitment to providing a rewarding and competitive remuneration to attract top talent in the industry. PLEASE NOTE: This job description is not exhaustive and is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Ecology Auto Parts Inc. is committed to providing a workplace and culture of respect, diversity, equity, inclusion, and belonging. We are dedicated to ensuring equal employment opportunity without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. Should you have a disability or specific needs requiring accommodation, please inform us. Thank you for your interest in opportunities with Ecology Auto Parts, Inc. We appreciate the enthusiasm and professionalism demonstrated by individuals seeking to join our team. Please be advised that Ecology Auto Parts, Inc. does not engage with or entertain solicitations from third-party recruiting firms for our hiring needs. We have a dedicated internal recruitment team managing our talent acquisition process. We kindly request that third-party recruitment firms refrain from submitting candidates for our open positions. Ecology Auto Parts, Inc. will not consider or entertain candidates represented by headhunter agencies for our current requisitions. Our commitment to fair and equitable hiring practices includes working directly with candidates who apply through our official channels. We believe in fostering a transparent and direct relationship with potential team members. We appreciate your understanding and compliance with this policy. If you are interested in joining Ecology Auto Parts, Inc., please visit our official careers page here: EAP, Inc. | Career Center for a list of our current job opportunities and application instructions.

Mechanic level 3 Orange, CA Falck is a is a global emergency medical services provider originating from Denmark that services 3 states in the US including: California, Texas, and Colorado. Falck has been operating in the US since 2010 and is one of the largest private providers of emergency medical services in the country today. Our BLS and ALS services impact not only the lives of our patients, but their families and communities. Click on the below link for a short video about what it means to join Falck! *************************** Pay Range: $29-$36 per hour based on experience. What We Offer: Full-Time Benefits (Medical, Dental, Vision, Life) 401(k) with company match Training and Career Development Paid Time-Off Position Summary: This position will be responsible and accountable for providing quality mechanical repairs and maintenance work up to their level of certification, utilizing all resources available within the shop area. This Mechanic performs a full range of maintenance functions involving mechanical, electrical, electronic, and hydraulic components. This position represents the Journeyman level class in this series and should be able to address any shop repairs to all equipment as needed. Responsibilities: The Mechanic Level 3 may be assigned one or more duties. These duties may include, but are not limited to, the following: Disassembles and performs partial or complete overhaul of engines, transmissions, differentials other assemblies and sub-assemblies. Uses gauges, special tools, and specialized equipment to diagnose mechanical failure or problems (such as electronic diagnostic equipment, infrared machine for exhaust emissions, and air conditioning recharging machine). Diagnose and troubleshoot vehicle problems. Makes wheel alignments and balances wheels. Installs and/or adjusts brakes, heaters and defrosters. Replaces worn or broken parts. Learns new technology and repair and service procedures and specifications. Repairs automotive equipment (such as alternators, hydraulic systems, pneumatic systems, pumps, and carburation systems). Operates vehicles to diagnose problems and validate that repairs have been completed. Constructs, maintains or services shop equipment as necessary. Repairs equipment and machinery as necessary (gasoline and diesel engines) Dispenses fuel, checks and refills fluid levels and changes oil and filters, as necessary Makes minor adjustments and repairs on equipment (such as repairing and/or replacing tires, head and tail lamps, muffler clamps, windshield wipers, and brakes and suspension) Checks equipment for defects (such as cracked or broken hoses or belts, worn tires, and inoperative lights) Removes and replaces batteries Oils and greases equipment Test drives vehicles to assure proper working order, and delivers vehicles for servicing or refueling Cleans vehicles, garage area and maintains shop equipment Disassembles and cleans vehicle parts Fixes door handles and locking mechanisms. Diagnoses malfunctions and performs vehicle repairs (e.g. adjust/test steering, electrical, cooling, lubricating, braking systems, drive trains, suspensions, power steering units, clutches, transmissions Diagnoses and repairs electronic controlled equipment components; Fuse blocks, BCM, PCM and ABS systems Diagnose, maintain, repair and recondition hydraulic systems; diagnose and repair front and rear drive axles, drive train components, belts, gears and chain drives Trains staff, as directed, in specific task, job practices and procedures of auto/equipment repair to improve and maintains the performance levels of these employees. May perform moderate supervisory roles when Fleet Manager or Fleet Lead are not accessible. Driving approximately 10% of time. Other duties as assigned Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Frequently: Ability to lift and carry 120 pounds. Constantly: Ability to bend and stoop, ability to sit and stand for extended periods of time, possess hand-eye-foot coordination and color recognition, good manual dexterity, with the ability to perform all tasks related to the . Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. The individual in this position must possess the following qualifications: High school diploma or general education degree (GED) 6-8 ASE Certifications are expected to be held and maintained. The five (5) preferred ASE Certifications (A4 Suspension and Steering, A5 Brakes, A6 Electrical, A7 Heating and AC, A9 Light Vehicle Diesel Engines) any remaining combination is acceptable. Strong interpersonal and communication skills with an ability to work effectively with a diverse range of individuals, teams, managers, supervisors, and external customers. Strong organization skills and attentiveness to detail. Ability to maintain a professional manner and appearance at all times. Satisfactory driving record in accordance with Company Driving Policy. Current state driver's license. At least 5+ years of experience repairing and performing preventative vehicle maintenance on emergency vehicles or equivalent. This job description is a summary of duties, it is by no means an all-inclusive list but is merely a broad guide of expected duties. Falck is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, disability, sexual orientation, genetic information, veteran status or any other characteristic protected by state or federal law.

Qualifications: Must have a minimum of 5 years experience in the cosmetics, food or pharmaceutical industry Must focus on maintenance manager expectations, prevent problems and strive towards continuous improvement Excellent written and verbal communication skills Able to work with minimal supervision Must have own tools Bilingual English/Spanish helpful but not mandatory Must be able to work any shift and overtime Responsibilities: General maintenance duties such as replacing valves and pumps, motors, gear reducers. Experience with equipment packaging equipment (labelers, rotary and in-line filler, in-line cappers, jet printers, cartoner's, bundlers, sleevers, heat tunnels and case sealers) Disassembly and assembly of electric motors, pumps, hydraulic and pneumatic systems Repair machinery and conveyor belts Basic electrical knowledge Maintains technical and professional knowledge Perform miscellaneous duties as required for plant maintenance Basic machinist experience using lathe and mill is a plus Salary Range: $30 - $35/hr

General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We have an exciting opportunity for an A&P Mechanic supporting Test Operations at our Flight Operations Facilities located at either Gray Butte (Palmdale) or El Mirage (Adelanto) in sunny Southern California. In this role you will be working on cutting edge technology utilizing your experience to further the development of new hardware and software, adding new capabilities to airborne sensing and weapons systems, and sustainment of customer fleets including MQ-1C Gray Eagle, MQ-9A Reaper, and MQ-9B SkyGuardian, SeaGuardian, and Protector systems. Responsible for the entire Unmanned Aircraft System, you will be modifying and configuring aircraft and ground control stations to meet customer specified test programs, executing ground tests, and supporting flight test activities. This includes flightline activities such as preflight, launch and recovery, and postflight data collection. DUTIES AND RESPONSIBILITIES: The successful candidate will service, troubleshoot, repair, inspect, and maintain aircraft and ground support equipment in support of test operations and sustainment activities in accordance with maintenance documentation. Support test teams for test and development (R&D) efforts. Performs work on airframe and powerplant in support of test operations and sustainment activities. Troubleshoot aircraft and engine systems to determine related problems to identify possible solutions. Develops and reviews new processes and procedures. Will assist in training efforts for various customers. Perform scheduled and unscheduled maintenance. Inspect powerplant and related components at regular intervals adhering to company approved procedures, maintenance manuals, and/or government technical order requirements. Review records to ensure all required documentation is completed in accordance with established company procedures for government and customer technical order requirements. Perform all launch and recovery tasks of aircraft to include ground operations, pre and postflight items, ground observer responsibilities, and inspect, test, maintain and operate ground support equipment. Expected to maintain a productive and safe working environment in accordance with established operating procedures and practices. Other duties as assigned or required We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply. Typically requires a high school diploma or equivalent and two or more years of aircraft mechanical maintenance experience. An FAA Airframe and Powerplant License is desired. Ability to obtain and maintain DOD SEC clearance is required. Must possess: General knowledge and understanding of the detailed aspects of the job Knowledge of relevant computer applications and operations Basic leadership, organization and planning skills Good analytical, interpersonal, verbal and written communication skills to accurately document, report and assess situations and make judgments. The ability to work both independently and in a team environment is essential. The ability to work any shift and additional hours as required.

5K Sign On Bonus For Qualified AMTs About Us ATP is the nation's largest flight school, providing students with the most efficient path to a successful airline pilot career. For over 40 years, ATP has been the leader in professional flight training and supplying pilots to regional and major airlines. Why you'll love working for us No shift work…ever! Monday - Friday day shift only Work with the best and brightest on new Cessna 172s, Piper Archers and Piper Seminoles A fleet size of over 650 aircraft Supportive team culture built around safety-focused decision making Well-equipped facilities with abundant resources (parts, tech data, support, etc.) The role The Aircraft Mechanic role works as a member of a team performing everything from light maintenance to heavy structural repairs on our fixed-winged aircraft. The right candidate will possess a results-driven mindset and the collaborative spirit necessary to ensure efficient workflow while keeping safety and quality as non-negotiable top priorities. Responsibilities Perform efficient troubleshooting, aircraft maintenance, and repairs in accordance with applicable aviation regulations, manufacturer's instructions, and company policies on our single engine and multi-engine piston powered flight training aircraft. Ensure consistent, accurate aircraft maintenance records by properly documenting & completing required forms, computer entries, and logbook entries. Follow all policies and procedures Keep a clean and orderly work environment Perform job duties in a safe manner Perform other duties as assigned Qualifications Airframe and Powerplant (A&P) Certificate 2 or more years of piston-powered aircraft maintenance experience Knowledge and understanding of Federal Aviation Regulations and manufacturer manuals Possess adequate tools FAA Inspection Authorization (preferred not required) Private pilot's license (preferred not required) Avionics troubleshooting experience with Garmin integrated avionics (preferred not required) Benefits ATP offers a comprehensive employee benefits program, including: 5K Sign On Bonus For Qualified AMTs Starting pay of $30/hr pay increases with years of experience Employer-Paid Life Insurance Medical coverage (Starting day one!) Dental/Vision/Life Insurance (Starting day one!) Critical Illness and Accident Insurance Short-Term and Long-Term Disability Insurance 401(k) Enrollment (100% Vested with no employer contributions) 8 Paid Holidays 13 Paid Time Off Days per Year (PTO is earned on an accrual-basis) increasing with tenure Physical Demands The physical demands described here must be met by an employee to successfully perform the essential functions of this job. The employee is regularly required to: talk, hear, see, stand; walk; have use hands and fingers, handle or feel; reach with hands and arms; lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. ATP is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #ATP123

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities MV Transportation is seeking an "A" Level Lead Mechanic/Technician who will perform preventive maintenance inspections on various types of vehicles. He/she will manage a fleet of 56 vehicles, assign work to other Technicians, purchase parts, and process paperwork. The position requires the Technician, must be able to teach, to diagnose, inspect, and change or repair defective coach components, sub-components, and systems on vehicles as time permits, more complex repair techniques. The A Lead Technician must possess a CDL license with airbrakes and a passenger endorsement, a 609 and 608 air conditioning certifications and at least H or T series ASE certifications. This position will report to the General Manager. Duties include, but are not limited to the following: * Assign, monitor, and review daily work orders to ensure timely completion of scheduled and unscheduled repairs. * Perform advanced diagnostics and repairs on engines, transmissions, electrical systems, HVAC, CNG systems, and other major vehicle components. * Lead, coach, and train mechanics of all levels (A/B/C) to maintain high standards of workmanship and safety. * Support the Maintenance Manager in planning preventive maintenance schedules and tracking vehicle availability. * Inspect and sign off on completed repairs to ensure adherence to company, city, and CHP standards. * Maintain communication between maintenance, dispatch, and operations to minimize vehicle downtime. * Assist with warranty claims, vendor coordination, and parts inventory oversight. * Promote safety awareness by enforcing PPE use, lockout/tagout procedures, and general shop safety compliance. * Conduct or assist in root cause analysis of repeat defects, road calls, and failed inspections. * Support preparation of vehicles for CHP, TRC, and City audits. * Serve as acting supervisor in the absence of the Maintenance Manager. * Coordinate between mechanics and utility personnel to ensure vehicle readiness and smooth daily yard operations. Qualifications Talent Requirements: * High School diploma or equivalent. * Effectively use and operate the tools and equipment required for the repair and maintenance of large vehicles. * Understand the theory, operation, and repair of diesel and CNG powered vehicles, including engines, transmissions, ignitions, and electrical hydraulic/pneumatic cooling, heating, and brake systems. * Learn and follow industrial and shop safety rules. * Read and interpret technical manuals and schematics. * Learn and effectively use personal computers and the company's software programs for inventory and parts. * Read maps and locate road-called vehicles. * Communicate effectively both orally and in writing. * Understand and follow oral and written instructions. * Work independently under continual training and close supervision. * Establish and maintain effective working relationships with those contacted in the course of work using principles of good customer service. * Combination of at least one (1) to two (2) years of journeyman level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program. Additional Requirements: * Must be able to pass a pre-employment drug screen and random drug testing. * Have taken basic automotive or heavy duty repair courses or have good understanding of basic automotive/heavy duty systems. * Have journeyman level tools. * Must be a least 23 years of age. * Must possess, or obtain and maintain a valid Class A or B Commercial Driver License with Air Brake and Passenger Endorsements, and a medical certificate by date of appointment. * Work well with others. * Must be able to work a varied schedule. * Willing to learn. * Available for training. * Able to lift up to 70 lbs Starting pay range: $41 - $43/hour MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized p Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Job Description Are you a skilled, experienced mechanic looking to take the next step in your career? Look no further! Our reputable automotive repair shop is seeking a talented Lead Mechanic to handle our advanced mechanical work. As the Lead Mechanic, you will play a pivotal role in maintaining our high standards of quality and customer satisfaction. If you're passionate about cars, thrive in a fast-paced environment, and possess exceptional leadership skills, we want to hear from you! Responsibilities: In this role, you will lead a team of dedicated mechanics, providing guidance and expertise to ensure efficient and accurate repairs. Your responsibilities will include diagnosing and repairing a variety of vehicle makes and models, conducting routine maintenance, and overseeing all aspects of advanced mechanical needs. Requirements: Proven experience as a mechanic, with a strong background in automotive repair and maintenance. Demonstrated leadership skills, with the ability to motivate and guide a team to success. Proficiency in diagnosing and repairing a wide range of vehicle issues. Excellent attention to detail and a commitment to delivering top-notch workmanship. Strong communication skills to liaise with customers and team members effectively. Why Join Us: We offer a competitive salary of $28-40 an hour, plus paid benefits and the opportunity for overtime. As a valued member of our team, you will have the chance to work in a supportive environment where your skills and contributions are recognized and appreciated. Please note that applicants must supply their own tools to be considered for this position. In addition to great pay and a supportive environment, we offer the following fantastic benefits: Tire Pros Benefits Health Insurance Dental Insurance Employee Discount Program Paid Time Off (Accrued Vacation and Sick hours) Vision Insurance ABOUT US Tire Pros has been providing our customers with high-quality products and services for years. We offer top-of-the-line tire brands as well as automotive repair and maintenance services. Whether it's a tires, alignment, brakes, suspension, or preventive care, it's no problem for our team. Our goal is to provide professional service and a hassle-free experience, every time. We have a rock-solid reputation for providing excellent services, support, and satisfaction. We build relationships for the long haul. We know that we would not be able to provide this level of service without our hard-working team. We value each employee and encourage growth. We do our best to attract and retain the highest-caliber employees by providing a fun and friendly work environment along with excellent training and development, competitive compensation, and top-tier benefits. Apply now to start your exciting new career with a strong and stable company. Ready to take the driver's seat in your career? Don't miss out on this exciting opportunity to become our Lead Mechanic! Apply now by submitting your resume and a brief cover letter outlining your relevant experience and why you're the perfect fit for our team. We can't wait to welcome you aboard! Job Posted by ApplicantPro

Element has an opportunity for a Mechanical Lab Lead. The Mechanical Lab Lead is a key member of the department's safety team and provides awareness around safety first. You will be relied upon heavily by other colleagues such as technicians, peers, Department Manager, Operations Manager, General Manager and other positions. In this role you will guide the technical staff in timely completion of daily work and may be designated as the main contact for customer on-site visits. Salary: $29- $31/hr DOE Responsibilities • Scheduling: Develop and maintain the department's daily, weekly, and project-based schedules to ensure resources are appropriately allocated and deadlines are met. • Consumables Tracking: Monitor and manage inventory of consumables; ensure timely ordering and availability of necessary supplies. • SQDC (Safety, Quality, Delivery, Cost): Lead the department's SQDC activities and reporting, ensuring alignment with company standards and goals. • Testing Oversight: Coordinate testing activities to ensure accuracy, compliance, and timely completion. • Calibration Schedule Management: Maintain and oversee the calibration schedule, ensuring all equipment is compliant and operational. • Cross-Department Communication: Serve as the liaison to other departments, communicating capabilities, needs, and schedules to support organizational goals. • Customer Interaction: Communicate directly with customers to provide data, answer inquiries, and coordinate witnessing schedules. • 5S Project Leadership: Drive and report on 5S projects to maintain workplace organization and efficiency. • Time Card Management: Review, correct, and approve employee time cards to ensure accurate payroll and compliance with timekeeping policies. Skills / Qualifications • Proven leadership experience in a technical, laboratory, or manufacturing environment. • Strong planning, coordination, and multitasking skills. • Knowledge of SQDC and 5S principles preferred. • Familiarity with calibration and testing standards and documentation practices. • Proficient in Microsoft Office Suite and scheduling/tracking tools. • Excellent written and verbal communication skills for internal and external interactions. • Strong attention to detail and data accuracy. • Ability to make informed decisions under pressure and adapt to changing priorities. • High school diploma or equivalent required; Associate's or Bachelor's degree in a technical field preferred. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to ‘Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming “the world's most trusted testing partner”. All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws.

About Monster Energy: Forget about blending in. That's not our style. We're the risk takers, the trailblazers, the game-changers. We're not perfect and we don't pretend to be. We're raw, unfiltered, and a bit unconventional. Our drive is just like our athletes, unrivaled. The power is in your hands to define what success looks like and where you want to take your career. It's not just about what we do, but about who we become on along the way. We are much more than a brand here. We are a way of life, a mindset. Join us. A Day in the Life: As a Production Line Mechanic at Monster Energy, you'll be the driving force behind our high-octane production process. Your role is to maintain and repair our cutting-edge machinery and equipment, ensuring they roar to life in line with our dynamic manufacturing procedures. Your mission: achieve peak efficiency, deliver top-tier quality, and power through to meet our ultimate production goals. Get ready to unleash your potential and keep the Monster Energy flowing! The Impact You'll Make: * Conduct routine maintenance checks on machines and equipment used in production. Install, diagnose, analyze, maintain, modify, repair, and/or rebuild a variety of plant and facility equipment. * Perform preventive maintenance tasks, such as checking, cleaning, or repairing equipment to detect and prevent problems to ensure that machines continue to run smoothly and operate efficiently; basic electrical equipment problems such as changing fuses, buttons, and switches. * Contribute significantly to the manufacturing process by ensuring product quality, safety, and efficient operations. Commit to safety and GMP (Good Manufacturing Practices). * Examine manufactured products and identify faults or defects. Paying attention to details and practicing analytical techniques help improve productivity. * Maintain accurate documentation for assignments, machine repairs, parts inventory, and maintenance logs. * Assist production personnel in change-overs and set-ups. Provide consultation on correct maintenance and preventative measures to machine users. * Utilize specific knowledge for a variety of skilled trades, including but not limited to, production and facility machinery and equipment, HVAC, plumbing, electrical, pipefitting, carpentry, utilities, etc. Who You Are: * Prefer a technical degree or license in mechanical maintenance or related field of study. * Additional Experience Desired: Between 1-3 years of experience in performing preventive maintenance, diagnostics, and repair. * Computer Skills Desired: Microsoft Office ability to modify basic reports, documents, and spreadsheets in Word and Excel. * Preferred Certifications: Electrical or mechanical engineering trade school. Monster Energy provides competitive total compensation. This position has an annual estimated salary of $27.00 -$36.00 per hour. The actual pay may vary depending on your skills, qualifications, experience, and work location.

FULL TIME Automotive Service Department Tune-up, A/C Tech NEW CAR TECH, heavyline (15A/ELECTRICAL/QUICK SERVICE) needed for Hyundai/Genesis Dealership in Laguna Niguel, CA. Hyundai/Genesis Certification & ASE Certification is wanted! FULL TIME, Benefits, Vacation, 401K opportunities AVAILABLE.

Piper Companies is seeking a Lead Mechanic to join a leading pharmaceutical and nutraceutical manufacturing organization in Lynwood, CA. his role is critical to ensuring efficient operation of bottle packaging machinery and maintaining compliance with cGMP and safety standards. Responsibilities of the Lead Mechanic: * Lead and coordinate daily maintenance and production activities to ensure smooth line operations. * Provide technical guidance and hands-on support to filling mechanics. * Ensure team compliance with cGMP, safety, and quality standards. * Collaborate with production supervisors, engineers, and quality personnel to improve equipment efficiency and reliability. * Perform daily set-ups, adjustments, and maintenance of bottle packaging machinery. * Execute quality changeovers, repairs, and preventative maintenance tasks. * Install and set up new vision systems as required. * Troubleshoot PLCs and machine circuit boards. * Assist in IQ/OQ/PQ for new machines and tooling. * Maintain accurate line set-up sheets and documentation. * Support management in planning maintenance schedules and prioritizing tasks. Qualifications for the Lead Mechanic: * 2+ years of experience in maintenance or packaging operations. * Mechanical Engineering degree a plus. * Knowledge of cGMP and safety guidelines. * Strong leadership and communication skills with the ability to guide and support a team. * Proven ability to train, mentor, and develop team members to achieve operational goals. Compensation for the Lead Mechanic: * $40-$45/hr * First Shift: 5AM-1:30PM with flexibility * Comprehensive Benefits: Medical, Dental, Vision, 401K, Sick Leave (as required by law). * ONSITE role. This job opens for applications on 1/12/26. Applications for this job will be accepted for at least 30 days from the posting date. Keywords: Maintenance Lead, Bottle Packaging Machinery, PLC troubleshooting, cGMP compliance, Preventative Maintenance, Mechanical Engineering, vision systems, IQ/OQ/PQ, packaging operations, Lynwood CA, onsite, manufacturing maintenance.

Metrea is a defense company dedicated to translating commercial innovation into solutions for the hardest problems in national security. With deep mission expertise, Metrea focuses on delivering effects as-a-service across a spectrum of domains including Air & Space, Electromagnetic & Cyber, and Synthetic. Metrea Management provides central services to eleven (11) global capability units via Operations, Solutions, Strategy, Legal, and Finance teams. Capability Unit Metrea Strategic Mobility (MSM) operates a fleet of Boeing KC-135R aircraft, offering an air-to-air refueling service that seamlessly, safely, and professionally integrates into military aviation training and operations. Position Summary To perform this job successfully, an individual must be able to perform each essential duty listed below satisfactorily. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions. Work Location Metrea Strategic Mobility Flightline 17301 Heacock St Moreno Valley CA 92551 Role and Responsibilities Inspect mechanical components of the Boeing KC-135 to identify discrepancies. Maintain and repair all systems of the Boeing KC-135 to include: Major / Minor aircraft inspections. Hydraulics System - Replace hydraulic components, bleed systems, and diagnose discrepancies. Jet Engine - Inspection, engine control rigging, and basic maintenance. Electrics - Use wiring schematics, trace ground, and power faults, and rectify component failures. Minor Fuel system repair, replace seals, in tank fuel probes and fuel system components is a plus, but not essential. Minor Sheet Metal repair, including minor riveting is a plus, but not essential. Aero Repair - Repair, replacement, and rigging of flight control surfaces is a plus, but not essential. Multi Point Refueling System experience is a plus, but not essential. CFM56 2-B / F108 jet engine experience is a plus, but not essential. Avionics - Guidance & Control / Radio Communications experience is a plus, but not essential. Perform daily aircraft inspections, launch/recover, refuel / defuel, debrief aircrew, troubleshoot, and repair discrepancies, jack aircraft, tow, and operate all required GSE (Ground Support Equipment). Follow all safety directives, maintenance procedures, and FAA regulations Remain current on all required training and certifications Accurately record aircraft maintenance in the automated maintenance records system. Flight-line driving. All duties assigned. Skills and Experience Education: High School Diploma or equivalent Experience: 5+ years working with heavy commercial aircraft or any military airframe. towing, jacking, and hazardous material use, storage, and disposal. Must have A&P, IA, engine run qualified, and an ASTM NCATT Aircraft Electronic Technician Certificate. Proven and demonstrable attention to detail skills. Excellent problem-solving skills, determining causes of errors and deciding on the course of action to solve. Comprehensive understanding of company philosophy and processes. Must be able to take initiative and work independently. Excellent communication skills, the ability to read and understand the information presented in writing, diagrams, and schematics. Computer Skills: Basic skills in Microsoft Office Suite Programs Our Culture Metrea's single core value “rooted in humility” is supported by four key attributes; entrepreneurial, systematic, discerning & over-deliver which combined; form our Teammate Firmware, our culture. These attributes are explored during the hiring process, when we grow our teams and continually support the growth of our culture. We are a hyper-collaborative, dynamically hierarchical organization united by a passion for what we do, and how we do it, who we do it with, and who we do it for. Benefits Health and welfare. Retirement plan eligibility. Work Authorization / Security Clearance The employee must be a US citizen. The employee must be able to hold and maintain a Secret Clearance Level. AAP/EEO Statement Metrea Special Management LLC (MAM) is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law. Position Type and Expected Hours of Work This is a Part-time position with typical working hours of Monday through Friday, 7:00 a.m. to 4:00 p.m. Hours and work shifts may change in accordance with department and business needs. Non-exempt employees may be required to work over 40 hours per week with approval from the department manager. Part-time non-exempt employees must obtain approval from the department manager before working over 29 hours per week. Hours and work shifts may change by department and business needs. Significant travel is required to carry out assigned maintenance tasks and air operations successfully. Travel Travel requirements are: Up to 50% away from home. Work Environment This job operates in a clerical, office setting. This role routinely uses standard office equipment such as computers, phones, photocopiers, and filing cabinets. Physical Demands This position involves daily physical activity such as walking, lifting, reaching overhead Reasonable Accommodations Statement To perform this role successfully, an individual must be able to perform the responsibilities outlined in this to a satisfactory standard. Reasonable accommodations may be made to enable qualified individuals with additional needs to perform the essential functions. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. The role, responsibilities and activities may change at any time with or without notice.