Aircraft Mechanic Jobs in Glendale, CA

This position works as an A&P mechanic team member performing inspections, repairs and preventative maintenance on piston aircraft. The successful A&P aviation mechanic candidate will possess the appropriate personality to work in a fast-paced environment while maintaining a constant focus on safety and quality. Technicians will also possess the ability to dynamically move through a computerized logbook management system, adhere to the maintenance and manufacturer manuals, and make safety-focused decisions on a day-to-day basis. We need an A&P mechanic that can fit in quickly, have a positive attitude, and have General Aviation experience working on piston powered aircraft; preferably Cessna and Piper. Responsibilities Perform efficient troubleshooting, aircraft maintenance, and repair in accordance with applicable regulations, manufacturer's instructions, and company policies Ensure consistent, accurate aircraft maintenance records by properly documenting & completing required forms, computer entries, and logbook entries Follow all policies and procedures Keep a clean and orderly work environment Perform job duties in a safe manner Perform other duties as assigned RequirementsMinimum Qualifications Airframe and Powerplant (A&P) Certificate 2 or more years of piston-powered aircraft maintenance experience Knowledge and understanding of Federal Aviation Regulations and manufacturer manuals Possess adequate tools Desired Qualifications FAA Inspection Authorization Private pilot's license Avionics troubleshooting experience (Garmin integrated avionics) Physical Demands Squat/kneel for extended periods Make fast, repeated movements of fingers, hands, and wrists Stand for extended periods Lift/carry more than 50 pounds of various items Maneuver body to enter confined spaces Bend, stretch, twist, or reach out Use stomach and lower back muscles to support the body for long periods without getting tired Move two or more limbs together (for example, two arms, two legs, or one leg and one arm) while remaining in place Be physically active for long periods without getting tired or out of breath Keep or regain the body's balance or stay upright when in an unstable position Climb to enter and exit aircraft using aircraft step/handles Make quick, precise adjustments to machine controls Climb and stand on ladders Walk Read Push/Pull Speak Bend/Stoop Hear Write Background check and drug screening BenefitsBenefits Offered Pay commensurate with experience $15,000 Employer Paid Life Insurance Medical coverage (Employer pays 60% of total premiums) Dental/Vision/Life Insurance Critical Illness and Accident Insurance Employer-Paid Long-Term Disability Insurance Short-Term Disability Insurance 401(k) Enrollment (100% Vested with no employer contributions) 8 Paid Holidays (New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Thanksgiving Friday, Christmas Eve and Christmas Day) 13 Paid Time Off Days per Year (PTO is earned on an accrual-based system, you accumulate a little over 1 day of PTO for each month you work. Accrued PTO may be requested upon successful completion of 90 days of employment.) 5 additional Paid Time Off Days per Year after 5 years of service (18 days total) 5 more Paid Time Off Days per Year after 10 years of service (23 days total)

Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Aircraft Mechanic assigned to a foreign field site is responsible to the Off-Site Supervisor for performing duties as assigned. Frequently exercises independent judgment and possesses abilities sufficient to supervise a crew of aircraft mechanics. Work is performed under minimum supervision, and the employee consults with the supervisor only for the initial job assignment and where departures from standard practices are involved. ESSENTIAL DUTIES AND FUNCTIONS The essential functions include but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal elements. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all-inclusive; they are examples only and may be amended or added to as needed by the organization. * Maintains Beech King Air B300 aircraft in support of aircrew missions. * Launches and recovers aircraft, and performs required inspections to ensure airframe structure and powerplant serviceability. * Adjusts, aligns, and calibrates aircraft components. Performs functional checks of fuel, hydraulics, engines, avionics, and electro-environmental systems. * Advises management of deficiencies affecting aircraft airworthiness. * Maintains aircraft support equipment inventory. * Performs inspections, and accomplishes refurbishment and phase maintenance. * Prepares and maintains aircraft maintenance records and historical documents. * Monitors/reviews deficiency reports for adverse trends. * Uses applicable OEM manuals when performing aircraft maintenance and troubleshooting aircraft. * Performs in-progress and follow-up inspections to ensure quality of work. * Researches, orders, and receives aircraft parts. * Prepares parts for turn-in to the supply system. Initiates material reports as required. * Maintains hand tools and special tools in safe and serviceable condition. * Adhere to company tool accountability procedures. * Reports unserviceable tools and equipment to appropriate parties. * Annotates equipment/tools inspection and condition documents. * Checks serviceability, and maintains and operates powered and non-powered support equipment. * Complies with established policies, procedures, and standards. * Complies with all safety, bioenvironmental, security, and housekeeping standards. * Operates special purpose and regular vehicles as required. * Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. * Assists in researching and requisitioning aircraft parts and components and determining the reparability and serviceability of these assets. * Monitors bench stock items and assists with and/or performs inventory inspections. * Maintains supply discipline in the work center at all times. * Actively participates in the Safety Program. * Ensures HAZMAT processes are followed. * Performs aircraft movements and FOD prevention walks on the flight line. * Completes maintenance documentation using required forms. * Services aircraft with fuel, oil, grease, hydraulic fluid, air, oxygen, and nitrogen. * Performs aircraft corrosion control procedures including washing, wiping down, polishing, and vacuuming. * Performs aircraft, basic post-flight, and periodic/phase inspections. * Operate and maintain GSE, flight line vehicles, and other support equipment as required. * Discusses discrepancies with aircrews to obtain adequate troubleshooting information and data. * Performs other job-related duties as assigned. * Maintain strict compliance with company and government Communications Security (COMSEC) policies and procedures. EDUCATION and/or EXPERIENCE: * High School diploma or GED equivalent required; two-year technical trade school, military experience, or equivalent on-the-job training is required * Must hold a valid Airframe & Powerplant certificate issued by the Federal Aviation Administration (FAA) * Must have a minimum of three years of hands-on experience as an A&P mechanic on small to medium fixed-wing and light & medium helicopters. * Experience shall be in a similar position within the last twelve (12) months. Knowledge, SKILLS, ABILITIES AND OTHER CHARACTERISTICS: The following are required: * Demonstrated experience in maintenance support for various fixed-wing and rotor-wing aircraft (e.g., Cessna 206 & 208, Beechcraft King Air 300 series airplanes and Bell 407/412 helicopters) * Demonstrated experience in maintenance support for medium cargo/commuter type aircraft (e.g., ATR 42, ATR 72 or Dash 8) * Have tools required to complete a variety of maintenance tasks on aircraft listed in above paragraphs * Knowledge of hand tools, power tools, machines, and equipment such as shears, sheet metal brake * Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals * Install and operate rotor and propeller balancing equipment. (e.g. RADS, MicroVib, & Zing) * Ability to retain information and make decisions according to standard policies and procedures * Ability to determine work methods to accomplish assignments * Working knowledge of applicable FAA Federal Aviation Regulations * Ability to make proper entries in aircraft logs and records * Obtain a DOJ Security Clearance as required * Have and maintain a valid driver's license * Must be a U.S. citizen PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee works in an aircraft hangar the majority of the shift and is required to stand; walk, stoop, kneel, crouch, or crawl. The employee is frequently required to reach with hands and arms as well as push and pull items. The employee must able to lift and/or move up to 50 pounds regularly. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Normal day to day working conditions are inside an aircraft hangar with good ventilation and airflow. Work may be regularly required in outside weather conditions where the employee will be exposed to all types of environmental conditions and extremes such as hot, cold, rain, wind, etc. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, and risk of electrical shock. The employee is required to wear personal protective equipment including eye protection, ear protection, hand protection, respirators, masks, aprons, leather safety shoes, steel toe shoes, fall protection harness, and other equipment anytime the potential for hazards exist. The employee is occasionally exposed to high precarious places, confined spaces, toxic or caustic chemicals; risk of radiation; and vibration. The noise level in the work environment is usually moderate. Benefits include the following: * Healthcare coverage * Retirement plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays. * Learning and Development resources * Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Aircraft Mechanic assigned to a foreign field site is responsible to the Off-Site Supervisor for performing duties as assigned. Frequently exercises independent judgment and possesses abilities sufficient to supervise a crew of aircraft mechanics. Work is performed under minimum supervision, and the employee consults with the supervisor only for the initial job assignment and where departures from standard practices are involved. ESSENTIAL DUTIES AND FUNCTIONS The essential functions include but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal elements. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all-inclusive; they are examples only and may be amended or added to as needed by the organization. Maintains Beech King Air B300 aircraft in support of aircrew missions. Launches and recovers aircraft, and performs required inspections to ensure airframe structure and powerplant serviceability. Adjusts, aligns, and calibrates aircraft components. Performs functional checks of fuel, hydraulics, engines, avionics, and electro-environmental systems. Advises management of deficiencies affecting aircraft airworthiness. Maintains aircraft support equipment inventory. Performs inspections, and accomplishes refurbishment and phase maintenance. Prepares and maintains aircraft maintenance records and historical documents. Monitors/reviews deficiency reports for adverse trends. Uses applicable OEM manuals when performing aircraft maintenance and troubleshooting aircraft. Performs in-progress and follow-up inspections to ensure quality of work. Researches, orders, and receives aircraft parts. Prepares parts for turn-in to the supply system. Initiates material reports as required. Maintains hand tools and special tools in safe and serviceable condition. Adhere to company tool accountability procedures. Reports unserviceable tools and equipment to appropriate parties. Annotates equipment/tools inspection and condition documents. Checks serviceability, and maintains and operates powered and non-powered support equipment. Complies with established policies, procedures, and standards. Complies with all safety, bioenvironmental, security, and housekeeping standards. Operates special purpose and regular vehicles as required. Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. Assists in researching and requisitioning aircraft parts and components and determining the reparability and serviceability of these assets. Monitors bench stock items and assists with and/or performs inventory inspections. Maintains supply discipline in the work center at all times. Actively participates in the Safety Program. Ensures HAZMAT processes are followed. Performs aircraft movements and FOD prevention walks on the flight line. Completes maintenance documentation using required forms. Services aircraft with fuel, oil, grease, hydraulic fluid, air, oxygen, and nitrogen. Performs aircraft corrosion control procedures including washing, wiping down, polishing, and vacuuming. Performs aircraft, basic post-flight, and periodic/phase inspections. Operate and maintain GSE, flight line vehicles, and other support equipment as required. Discusses discrepancies with aircrews to obtain adequate troubleshooting information and data. Performs other job-related duties as assigned. Maintain strict compliance with company and government Communications Security (COMSEC) policies and procedures. EDUCATION and/or EXPERIENCE: High School diploma or GED equivalent required; two-year technical trade school, military experience, or equivalent on-the-job training is required Must hold a valid Airframe & Powerplant certificate issued by the Federal Aviation Administration (FAA) Must have a minimum of three years of hands-on experience as an A&P mechanic on small to medium fixed-wing and light & medium helicopters. Experience shall be in a similar position within the last twelve (12) months. Knowledge, SKILLS, ABILITIES AND OTHER CHARACTERISTICS: The following are required: Demonstrated experience in maintenance support for various fixed-wing and rotor-wing aircraft (e.g., Cessna 206 & 208, Beechcraft King Air 300 series airplanes and Bell 407/412 helicopters) Demonstrated experience in maintenance support for medium cargo/commuter type aircraft (e.g., ATR 42, ATR 72 or Dash 8) Have tools required to complete a variety of maintenance tasks on aircraft listed in above paragraphs Knowledge of hand tools, power tools, machines, and equipment such as shears, sheet metal brake Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Install and operate rotor and propeller balancing equipment. (e.g. RADS, MicroVib, & Zing) Ability to retain information and make decisions according to standard policies and procedures Ability to determine work methods to accomplish assignments Working knowledge of applicable FAA Federal Aviation Regulations Ability to make proper entries in aircraft logs and records Obtain a DOJ Security Clearance as required Have and maintain a valid driver's license Must be a U.S. citizen PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee works in an aircraft hangar the majority of the shift and is required to stand; walk, stoop, kneel, crouch, or crawl. The employee is frequently required to reach with hands and arms as well as push and pull items. The employee must able to lift and/or move up to 50 pounds regularly. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Normal day to day working conditions are inside an aircraft hangar with good ventilation and airflow. Work may be regularly required in outside weather conditions where the employee will be exposed to all types of environmental conditions and extremes such as hot, cold, rain, wind, etc. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, and risk of electrical shock. The employee is required to wear personal protective equipment including eye protection, ear protection, hand protection, respirators, masks, aprons, leather safety shoes, steel toe shoes, fall protection harness, and other equipment anytime the potential for hazards exist. The employee is occasionally exposed to high precarious places, confined spaces, toxic or caustic chemicals; risk of radiation; and vibration. The noise level in the work environment is usually moderate. Benefits include the following: Healthcare coverage Retirement plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays. Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Aircraft Mechanic assigned to a foreign field site is responsible to the Off-Site Supervisor for performing duties as assigned. Frequently exercises independent judgment and possesses abilities sufficient to supervise a crew of aircraft mechanics. Work is performed under minimum supervision, and the employee consults with the supervisor only for the initial job assignment and where departures from standard practices are involved. **ESSENTIAL DUTIES AND FUNCTIONS** The essential functions include but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal elements. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all-inclusive; they are examples only and may be amended or added to as needed by the organization. + Maintains Beech King Air B300 aircraft in support of aircrew missions. + Launches and recovers aircraft, and performs required inspections to ensure airframe structure and powerplant serviceability. + Adjusts, aligns, and calibrates aircraft components. Performs functional checks of fuel, hydraulics, engines, avionics, and electro-environmental systems. + Advises management of deficiencies affecting aircraft airworthiness. + Maintains aircraft support equipment inventory. + Performs inspections, and accomplishes refurbishment and phase maintenance. + Prepares and maintains aircraft maintenance records and historical documents. + Monitors/reviews deficiency reports for adverse trends. + Uses applicable OEM manuals when performing aircraft maintenance and troubleshooting aircraft. + Performs in-progress and follow-up inspections to ensure quality of work. + Researches, orders, and receives aircraft parts. + Prepares parts for turn-in to the supply system. Initiates material reports as required. + Maintains hand tools and special tools in safe and serviceable condition. + Adhere to company tool accountability procedures. + Reports unserviceable tools and equipment to appropriate parties. + Annotates equipment/tools inspection and condition documents. + Checks serviceability, and maintains and operates powered and non-powered support equipment. + Complies with established policies, procedures, and standards. + Complies with all safety, bioenvironmental, security, and housekeeping standards. + Operates special purpose and regular vehicles as required. + Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. + Assists in researching and requisitioning aircraft parts and components and determining the reparability and serviceability of these assets. + Monitors bench stock items and assists with and/or performs inventory inspections. + Maintains supply discipline in the work center at all times. + Actively participates in the Safety Program. + Ensures HAZMAT processes are followed. + Performs aircraft movements and FOD prevention walks on the flight line. + Completes maintenance documentation using required forms. + Services aircraft with fuel, oil, grease, hydraulic fluid, air, oxygen, and nitrogen. + Performs aircraft corrosion control procedures including washing, wiping down, polishing, and vacuuming. + Performs aircraft, basic post-flight, and periodic/phase inspections. + Operate and maintain GSE, flight line vehicles, and other support equipment as required. + Discusses discrepancies with aircrews to obtain adequate troubleshooting information and data. + Performs other job-related duties as assigned. + **Maintain strict compliance with company and government Communications Security (COMSEC) policies and procedures.** **EDUCATION and/or EXPERIENCE:** + High School diploma or GED equivalent required; two-year technical trade school, military experience, or equivalent on-the-job training is required + Must hold a valid Airframe & Powerplant certificate issued by the Federal Aviation Administration (FAA) + Must have a minimum of three years of hands-on experience as an A&P mechanic on small to medium fixed-wing and light & medium helicopters. + Experience shall be in a similar position within the last twelve (12) months. **Knowledge, SKILLS, ABILITIES AND OTHER CHARACTERISTICS:** The following are required: + Demonstrated experience in maintenance support for various fixed-wing and rotor-wing aircraft (e.g., Cessna 206 & 208, Beechcraft King Air 300 series airplanes and Bell 407/412 helicopters) + Demonstrated experience in maintenance support for medium cargo/commuter type aircraft (e.g., ATR 42, ATR 72 or Dash 8) + Have tools required to complete a variety of maintenance tasks on aircraft listed in above paragraphs + Knowledge of hand tools, power tools, machines, and equipment such as shears, sheet metal brake + Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals + Install and operate rotor and propeller balancing equipment. (e.g. RADS, MicroVib, & Zing) + Ability to retain information and make decisions according to standard policies and procedures + Ability to determine work methods to accomplish assignments + Working knowledge of applicable FAA Federal Aviation Regulations + Ability to make proper entries in aircraft logs and records + Obtain a DOJ Security Clearance as required + Have and maintain a valid driver's license + Must be a U.S. citizen **PHYSICAL DEMANDS:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee works in an aircraft hangar the majority of the shift and is required to stand; walk, stoop, kneel, crouch, or crawl. The employee is frequently required to reach with hands and arms as well as push and pull items. The employee must able to lift and/or move up to 50 pounds regularly. **WORK ENVIRONMENT:** The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Normal day to day working conditions are inside an aircraft hangar with good ventilation and airflow. Work may be regularly required in outside weather conditions where the employee will be exposed to all types of environmental conditions and extremes such as hot, cold, rain, wind, etc. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, and risk of electrical shock. The employee is required to wear personal protective equipment including eye protection, ear protection, hand protection, respirators, masks, aprons, leather safety shoes, steel toe shoes, fall protection harness, and other equipment anytime the potential for hazards exist. The employee is occasionally exposed to high precarious places, confined spaces, toxic or caustic chemicals; risk of radiation; and vibration. The noise level in the work environment is usually moderate. **Benefits include the following:** + Healthcare coverage + Retirement plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays. + Learning and Development resources + Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

* Serve as crew chief/flight engineer * Inspect Aircraft * Troubleshoot malfunctions * Repair, replace rotary wing assemblies and components * Complete final adjustments * Rig flight control systems * Perform maintenance operational checks * Use tools and testing equipment Help Requirements Conditions of Employment * This position requires an annual physical examination. * Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation. * THIS POSITION REQUIRES ACTIVE MEMBERSHIP AS A SOLDIER IN THE U.S. ARMY RESERVE (USAR). * This position requires a Personnel Security Investigation. * This position is subject to the Lautenberg Amendment/Domestic Violence Misdemeanor Amendment to the Gun Control Act of 1968. * This position is subject to Drug Abuse Testing Program requirements. Qualifications This position is being filled under the Direct Hire Authority for DoD Maintenance Activities. POSITION IS ANNOUNCED AS A STANDING REGISTER (OPEN CONTINUOUS RECRUITMENT): First cutoff date to evaluate candidates will be 20 Febuary 2025 at 11:59 PM. Application packages received after this date will be evaluated at a future cutoff date to be determined based on the needs of the agency. Application packages must be complete at the time referral certificates are issued. Final application disposition will be completed once all positions have been filled or the announcement reaches the end of the open period stated in the announcement. Who May Apply: US Citizens Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience. There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision. Minimum Qualifications (Screen Out Element): Ability to do the work of a(n) Aircraft Mechanic without more than normal supervision. To meet the screen out element, applicants should document experience or show the ability to do the following: maintained and repaired rotary wing aircraft to include changing oil and hydraulic pumps, lubricating aircraft components, and a variety of less complex maintenance functions. Failure to meet this Screen out Element will result in an ineligible rating. Physical effort: Must be able to stand for long periods of time; or endure recurring activities such as bending, crouching, stooping, stretching, and reaching. Must possess and maintain the physical ability to lift and carry up to 50 pounds. Working Conditions: Work is performed inside shops, aircraft, or outside in varying weather conditions. Exposed to high frequency and high intensity noises. Dirt, dust, grease, and fumes are normally present. Danger of the possibility of cuts, burns, shocks, strains, falls, and eye or skin irritations is possible. Education This job does not have an education qualification requirement. Additional information * This position offers a $10,000 recruitment bonus to individuals who are newly appointed. You are considered newly appointed if this is your first appointment as a Federal Government civilian employee or if you have a minimum of a 90 day break in service from a previous Federal civilian position. You may qualify with a break in service of less than 90 days only if your previous Federal civilian appointment was a time-limited or NOT a permanent appointment. Your recruitment bonus will be made in two payments of $5,000. You receive the first payment when you enter on duty, second payment at your one year anniversary. This bonus requires a two year service obligation to the Army Reserve Military Technician Program. * Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. * You will be required to provide proof of U.S. Citizenship. * One year trial/probationary period may be required. * Direct Deposit of Pay is required. * Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. * If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. * This is a Logistics career field position. * Multiple positions may be filled from this announcement. * Salary includes applicable Local Market Supplement. * When you perform a Civilian Permanent Change of Station (PCS) with the Government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit ************************************************************************************** for more information. * Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government's interest. * New Army Reserve Military Technicians may be authorized moving expenses to their first official duty station. To be eligible to receive moving expenses, you must be a newly appointed Federal civilian employee or have a minimum of a 3-day break in service from previous Federal civilian employment. Read more * Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. How You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications above. Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility. You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation. Veterans and Military Spouses will be considered along with all other candidates. * Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. * Required Documents As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies. The documents you are required to submit vary based on whether or not you are eligible for preference in federal employment. A complete description of preference categories and the associated required documents is in the Applicant Checklist for Public Announcements. As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further. 1. Your resume: * Your resume may be submitted in any format and must support the specialized experience described in this announcement. * If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations and you may not be considered for this vacancy. * For qualifications determinations your resume must contain hours worked per week and the dates of employment (i.e., HRS per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as incomplete and you may not receive consideration for this position. * For additional information see: What to include in your resume. 2. Other supporting documents: * Cover Letter, optional * Most recent Performance Appraisal, if applicable NOTE: Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove another person's personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility. * How to Apply To apply for this position, you must complete the online questionnaire and submit the documentation specified in the Required Documents section above. The complete application package must be submitted by 11:59 PM (EST) on 06/30/2025 to receive consideration * To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application (********************************************************** * Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. * After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. * You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. You must re-select your resume and/or other documents from your USAJOBS account or your application will be incomplete. * It is your responsibility to verify that your application package (resume, supporting documents, and responses to the questionnaire) is complete, accurate, and submitted by the closing date. Uploaded documents may take up to one hour to clear the virus scan. * Additional information on how to complete the online application process and submit your online application may be found on the USA Staffing Applicant Resource Center. To verify the status of your application, log into your USAJOBS account (************************************** all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: ******************************************************** Agency contact information Army Applicant Help Desk Website ************************************************* Address DE-W6TUAA FTS, 11TH AVN CMD DO NOT MAIL Fort McCoy, WI 54656 US Next steps If you provided an email address, you will receive an email message acknowledging receipt of your application. Your application package will be used to determine your eligibility, qualifications, and quality ranking (as applicable) for this position. If you are determined to be ineligible or not qualified, your application will receive no further consideration. * Fair and Transparent The Federal hiring process is set up to be fair and transparent. Please read the following guidance. * Criminal history inquiries * Equal Employment Opportunity (EEO) Policy * Financial suitability * New employee probationary period * Privacy Act * Reasonable accommodation policy * Selective Service * Signature and false statements * Social security number request

Los Angles, CA Area United States Compensation: Up to $55/hour + Sign-on bonus available Our client is currently seeking an experienced Aircraft Maintenance Technician with strong troubleshooting skills. The Aircraft Maintenance Technician reports to the Aircraft Maintenance Supervisor and is responsible for the efficient execution of the work scope and for the maintenance, preventive maintenance, and alterations performed. 2 - 5+ years of Corporate/Business Jet experience required ** CLIENT IS CURRENTLY ACCEPTING CANDIDATES WITH OVER 6 MONTHS OF EXPERIENCE WORKING ON CORPORATE JET LINES OF AIRCRAFT ** Key Requirement: Must have maintenance experience on one or more of the following brands of aircrafts (corporate jet lines of aircraft only): Gulfstream, Dassault, Learjet, Bombardier, Cessna Hiring for 3 openings: 1 for day shift, 1 for swing shift and another one for weekend shift. Morning Shift [Monday through Friday] Swing Shift [2pm to 11pm Monday through Friday] Weekend Shift [10 hours shift - Friday through Monday] Skills and Abilities Able to effectively communicate with management, peers, and external parties Ability to prioritize and organize workflow Excellent verbal and written communication skills Able to multi-task Known for working well with all levels of managers, staff, clients, and vendors Able to handle sensitive documents in a very confidential manner Responsibilities Performs maintenance and alteration of articles as directed Uses current, applicable technical data Adheres to all company and OSHA regulated policies and procedures Maintains outstanding attendance record Adheres and promotes the Clay Lacy Vision, Mission and Values daily Maintain proficiency with tools, techniques, and acceptable practices used to perform maintenance and alteration duties. Documenting all work performed including references to technical data used on work order squawk form and other forms as required Documenting all parts and/or equipment removed from or installed on aircraft on the removal and installation forms Ensuring material has been properly received prior to installation on aircraft Verify material shelf life has not expired prior to use Verify calibrated tooling calibration due date and condition prior to use Document identified discrepancies on Discrepancy Collection Form Do not deviate from technical data unless appropriate approvals are obtained Promote an efficient and professional work Participates in Continuous Improvement projects as directed Needs to be available to work different shifts and weekends as requested Able to travel away from the primary facility for training and work Perform other duties as assigned Education A&P Certificate required Experience 2 - 5+ years of Corporate/Business Jet experience Equal Opportunity Employer In compliance with the Americans with Disabilities Act, the company provides reasonable accommodation to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer. All applicants must submit to a pre-employment drug screen and background check. Client offers an excellent benefits package including medical, dental, vision, matching 401(K) and more to employees in full-time positions.

ABOUT AERO Aero is on a mission to elevate air travel-inspired by the golden age of aviation, designed for modern life. Direct, premium flights via private terminals offer guests the comfort of low-contact travel and the effortlessness of flying private. We pride ourselves on being dedicated hosts and expect the same commitment from every team member. That means: We prioritize safety above all else, personalize every experience, always assume best intentions, and act decisively. ABOUT THIS ROLE Aircraft Maintenance Technicians (AMT) are FAA certificated Airframe and Powerplant (A&P) Technicians who perform direct maintenance in accordance with the company's Continuous Airworthiness Maintenance Program (CAMP). AMT's report to the Director of Maintenance or his subordinate. AMTs at Aero work a 10-hour, 4-day work schedule, and while shifts may vary during training, this position will eventually cover our second shift. RESPONSIBILITIES * Able to service, repair, perform maintenance, preventive maintenance, and alteration of company aircraft and to ensure the airworthiness of company aircraft * Technicians working on aircraft, components or related parts of aircraft are responsible to perform work outlined on applicable work forms in accordance with the approved CAMP, GMM policies and procedures, manufacturer's manuals and FAA requirements * Strong mechanical and troubleshooting skills required * Accurately complete all required maintenance records * Provide leadership and guidance required to perform assigned tasks and whenever necessary to train others including apprentices * Conduct all tasks in a safe and efficient manner complying with all local, state, Federal safety, health, regulatory requirements, company and OEM manuals (GMM, AMM, etc.) and with any internal policies and procedures identified by the company * Other duties as assigned by the Director of Maintenance REQUIREMENTS * Airframe and Powerplant Ratings required (Valid A&P license) * Possess a valid, unrestricted driver's license * Experience performing aircraft maintenance on large aircraft (10 seats or more) (Preferred 2 years of greater experience, Preferred experience on Embraer 135/145/600 or Legacy aircraft, Preferred Avionics Experience) * High school diploma/GED (Associates degree or higher preferred) * Travel will be required (Periodic travel in support of Part 135 operations and Company objectives will be expected, may be required to travel on flights to provide maintenance support during charter/regular operations.) * Must be able to read and understand technical manuals * Must be able to work and interact with other mechanics, supervisors, and flight crews in a professional manner. * Must have positive attitude towards productivity, quality of work and safety * Be proficient in Microsoft Office and able to learn operating systems the company utilizes * Ability to effectively communicate, both verbal and written * Ability to work overtime when workload demands it * Must be physically capable to execute the duties of this position including: Bending, squatting, kneeling, sitting and standing for extended periods of time, must be comfortable working on ladders and or workstations of 10 feet or less and small spaces such as under instrument panels and inside empennage, Frequent usage of hands, wrists, shoulders and back is necessary, the ability to lift up to 75 pounds, and the ability to work on exposed aircraft parking ramp in weather conditions including but not limited to rain and winds. * As this is a (DOT) safety-sensitive position as defined in 14 CFR part 120[1]: All prospective employees are subject to pre-employment testing for the following drugs and their metabolites: Marijuana, Cocaine, Amphetamines, Opioids and Phencyclidine (PCP). $37 - $45 an hour BENEFITS & PAY Pay Range: $37.00- $45.00 per year in Los Angeles, CA - exact compensation may vary based on skills, experience, and location Time Off: Accrued vacation, sick time, bereavement leave, and holidays! Benefits: Medical, dental, vision, life, disability, 401k, health FSA, dependent care FSA

Job Details Valencia, CA Full Time High School $21.00 - $23.00 Hourly None AerospaceDescription HRD Aero Systems offers world-class service for the Aviation industry. We service aviation safety equipment, including fire extinguishers, oxygen systems, and inflatables as well as outright PMA Part sales that make people's lives safer. It is our goal to make work meaningful for people everywhere, we work to ensure our team reflects the diversity of the businesses we serve. Job Summary: Under general supervision the technician is responsible for the assembly and repackaging of inflatable products in accordance to the Original Equiptment Manufacturing (OEM) specifications and written procedures. Responsibilities: Read and interpret data, manuals, or other materials to determine specifications, inspection, and testing procedures, accept units that are to be maintained from the receiving inspection process, ensure all items are accounted for and the assembly is ready for packing. Perform duties such as manual lifting, pulling, pushing, and tugging to repackage articles, use proper tooling to repackage inflatables in accordance with OEM/CMM and/or approved data. Insert units into oven, when necessary, work in conjunction with inspector to provide continuity in packing process, ensure that all parts and components are in airworthy condition prior to packing. Measure dimensions and/or use templates to verify specified dimensions or settings meet OEM guidelines, confirm all packing aids are accounted for. Completes documents and forms applicable to the work task. Carry out duties in accordance to QCM/RSM written specifications and procedures. Ensure any relevant Airworthiness Directives (AD's) are applied. Check that Service Bulletins are complied with when applicable to the required task. Maintain working area in an organized and neat condition, observe and follow all safety rules and policies. Maintain an acceptable level of productivity as determined by department requirements and provide team member support. Qualifications Requirements: Previous inflatable packing experience (i.e parachute, marine raft, etc), good hand-eye coordination, able to read a tape measure and have basic math skills, able to work in team environment, ability to read, write & understand English, an eye for detail. Trained in qualified in accordance with OJT requirement, ability to read interpret documents such as safety rules, procedure manuals. Physical Requirements: Required to frequently stand, bend, stooping, squatting, pushing/pulling, kneeling and walking; the employee will intermittingly sit; frequently use hands to handle, grasp, squeeze or feel; reach with hands and arms; must see in the normal visual range of the unit with or without correction; hear in the normal audio range with or without correction. Continuously bend, twist, and kneel; ability to lift and carry up to 50 lbs with assistance. Schedule: Monday - Friday 6:00am - 2:30pm Benefits: 401K Health and Wellness Insurance, Flexible Spending Account, Life Insurance, Referral Program, Employee Assistance Program HRD offers great benefits that include medical, dental, and vision insurance, vacation and sick time, holiday benefits, and contributing 401k with match! HRD is focused on putting people first … from our employees to our customers and their customers. HRD is an equal opportunity organization that embraces diversity. Apply to join our team today!

JOB POSTING NOTICE OF EXTERNAL JOB OPPORTUNITIES POSTING #LA-100-25E WASTEWATER TREATMENT SYSTEM MECHANIC (Stationary Mechanic - Journey Level) The Sanitation Districts of Los Angeles County are a non-civil service public agency separate from Los Angeles County government with over 1,700 employees. The Santa Clarita Valley Sanitation District operates the Saugus and Valencia Water Reclamation Plants which serve over 140,000 residents of the City of Santa Clarita and the surrounding unincorporated County areas of Stevenson Ranch and Castaic. Sanitation Districts Nos. 14 and 20 serve a population of over 300,000 from the Antelope Valley and operate the Lancaster and Palmdale Water Reclamation Plants, respectively. The Sanitation Districts of Los Angeles County is recruiting for a Journey Level Wastewater Treatment System Mechanic. Current vacancy is at Palmdale. The essential functions of this position are to perform skilled preventive repair and maintenance of stationary equipment and machinery in a wastewater treatment facility. A 9/80 schedule is offered consisting of Monday through Thursday (6:30am-4:00pm) and working Friday (6:30am-3:00pm). After hour, overtime, and weekend callbacks will sometimes be required. This is an excellent career opportunity, with comprehensive benefits including medical, dental, retirement, along with paid vacation, sick leave and holidays. Additional benefit information can be viewed by clicking on the Benefits tab. Initial salary placement will be based on the selected candidate's qualifications. MINIMUM QUALIFICATIONS Candidates must possess a valid California Class C driver license; -AND- Four years performing directly-related skilled maintenance or craft duties involving the repair and overhaul of a variety of comparable machinery and equipment. Twelve semester units of college related coursework or completion of one year of a two-year trade school in a mechanical technology or closely related program may be substituted for one year of the required experience; -OR- graduation from a two-year trade school in a mechanical technology or closely related program may be substituted for two years of the required experience. NOTE: The selected candidate must be able to obtain and maintain a valid Class A or B California driver license within six (6) months. A crane certification from the State of California is also required. Crane certification involves attendance at training sessions, passing written and/or practical examinations and providing annual evidence of medical fitness. This training will be provided by the Districts and is mandatory for the individual who is selected for this position. In addition, the selected candidate must also enter the Respiratory Protection Program and attain the HAZWOPER Technician level training. EXAMPLES OF ASSESSMENT CRITERIA The competitive selection process may cover: Knowledge of : Methods, materials and tools used in the repair of large and complex mechanical equipment such as engines, compressors and pumps and their operation; use of precision test equipment and tools; hand tools, welding and cutting equipment, pipe cutters and threaders, valve grinders and various saws; occupational hazards and safety regulations of the trade. Ability to: Diagnose and repair a wide variety of mechanical equipment; read, interpret, and work from repair manuals and specifications; use specialized tools and equipment; and instruct apprentices in trade techniques. ADDITIONAL INFORMATION SELECTION PROCESS: All applications will be reviewed to determine if the conditions and qualifications for testing are met. The selection process will consist of a written test weighted at 50% and/or an interview weighted at 50%. Candidates must receive a qualifying score on each selection component to move forward in the selection process. Please apply online at ************* within the application period. Resumes will not be accepted in lieu of a completed LACSD Employment application. Check your e-mail regularly throughout the recruitment process as notifications are sent via e-mail. Please make sure that your registered e-mail address is accurate and current. To ensure proper delivery add *********************** to your contact list. NOTE: The individual(s) recommended for hire must undergo a job-related pre-employment physical, as well as a reference check, background check, DMV report, and a drug test. To learn more about how the Sanitation Districts convert waste into resources, please visit the following video: Converting Waste into Resources. For more information regarding this recruitment, please contact Luz Avila at **************, extension 1329. As an equal opportunity employer, the Districts strongly encourage people with disabilities and people from historically marginalized communities to apply.

About Us ATP is the nation's largest flight school, providing students with the most efficient path to a successful airline pilot career. For over 35 years, ATP has been the leader in professional flight training and supplying pilots to regional and major airlines. The role The Aircraft Mechanic position works as a team member performing inspections, repairs and preventative maintenance on piston flight training aircraft. The successful candidate will possess the appropriate personality to work in a fast-paced aviation environment while maintaining a constant focus on safety and quality. A&P Mechanics will also possess the ability to dynamically move through ATP's computerized logbook management systems, adhere to the maintenance and manufacturer manuals, and make safety-focused decisions on a day to day basis. Responsibilities Perform efficient troubleshooting, aircraft maintenance, and repair in accordance with applicable aviation regulations, manufacturer's instructions, and company policies Ensure consistent, accurate aircraft maintenance records by properly documenting & completing required forms, computer entries, and logbook entries Follow all policies and procedures Keep a clean and orderly work environment Perform job duties in a safe manner Perform other duties as assigned Qualifications Airframe and Powerplant (A&P) Certificate 2 or more years of piston-powered aircraft maintenance experience Knowledge and understanding of Federal Aviation Regulations and manufacturer manuals Possess adequate tools FAA Inspection Authorization Private pilot's license Avionics troubleshooting experience (Garmin integrated avionics) Benefits ATP offers a comprehensive employee benefits program, including: $5k sign bonus for Certificated AMTs $1k sign on bonus for Apprentice AMTs Starting pay commensurate with experience Employer Paid Life Insurance Medical coverage (Starting day one!) Dental/Vision/Life Insurance (Starting day one!) Critical Illness and Accident Insurance Short-Term and Long-Term Disability Insurance 401(k) Enrollment (100% Vested with no employer contributions) 8 Paid Holidays 13 Paid Time Off Days per Year (PTO is earned on an accrual-basis) Physical Demands The physical demands described here must be met by an employee to successfully perform the essential functions of this job. The employee is regularly required to talk, hear, see, stand; walk; use hands to finger, handle or feel; and reach with hands and arms, lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. ATP is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #ATP123

West Star is the fastest growing maintenance repair organization in the industry and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. What you can expect as an Aircraft Maintenance Technician at West Star: Whether you are replacing or repairing parts, troubleshooting electrical/mechanical/hydraulic and pneumatic systems or performing inspections on some of the most sophisticated civilian aircraft in the world, no day is the same. What is the same, is that each day will bring new experiences and opportunities for growth. You will be ESSENTIAL to many FUNCTIONS including: * Performing general mechanical tasks on aircraft and related systems. * Removal and installation of panels and components, * Troubleshooting and problem solving aircraft system/component issues * De-fueling aircraft, * Engine removal/installations, * Operating ground support equipment, * Inspection and evaluation of the aircraft and components * Aircraft movement and assistance in performance runs/ taxiing * Maintenance and repair of shop facility, equipment and tooling * Immediately notify the Lead Mechanic of any problem areas such as parts, materials, workmanship, or airworthiness issues. * Provides the Lead Mechanic with a detailed report of work progression and open items to be included in the shift turnover log * Proper tagging of Aircraft components, parts, and panels appropriately stored including racks by aircraft. * Basic computer skills to be able to navigate electronic training, manuals, and maintenance data bases * Willing and able to work rotating shifts including, nights, holidays, weekends and days off. * Effectively and clearly communicate (i.e., speak, write, read) in English * Any other job-related duties as assigned by supervisor or management. What you'll need to bring with you: Your Education: A High school diploma or equivalent, and Airframe and Powerplant License are required. A valid driver's license approved for airline travel and/or a valid passport is ideal Your Initiative: We're looking for team players who are self-motivated and able to perform in a fast paced environment where working under specific deadlines and time constraints will be common. Your Sense of Responsibility: Attend work every day as scheduled to include overtime and weekend assignments. Notify supervisor in advance of shift starting if unable to work. Must have reliable transportation to get to work each and every day. Perform all work in accordance with Federal Aviation Administration guidelines. Follow all company and safety rules during performance of duties. Maintain customer oriented work habits.

The Aircraft Maintenance Technician III reports to the Aircraft Maintenance Supervisor and is responsible for the efficient execution of the work scope and for the maintenance, preventive maintenance, and alterations performed under the authority of the Clay Lacy FAA Certificated Repair Station. Duties and Responsibilities * Performs general to complex maintenance task on assigned aircraft and related systems. This shall include but not limited to items such as removal and installation of panels and components, repair work, and sheet metal repair or installation. * Performs aircraft mechanic duties that require strong level of repair knowledge and troubleshooting. * Examines, disassembles, and inspects engines, parts or other components for wear, warping, breaks, leaks or other non-conformities or deficiencies. * Assembles and installs electrical, plumbing, mechanical, hydraulic, and structural components, and accessories, using hand tools and power tools. * Services and maintains aircraft systems by performing tasks, including, but not limited to flushing crankcase, cleaning screens, greasing moving parts, and checking brakes. * Repairs, replaces, and rebuilds aircraft structures, functional components, and parts, such as wings and fuselage, rigging, and hydraulic units. * Disassemble/Reassemble aircraft, systems, or components, following drawings, engineering orders and technical publications. * Reads and interprets aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. * Adjusts, aligns, and calibrate aircraft systems, using hand tools, gauges, and test equipment. * Uses current, applicable technical data. * Adheres to all company and OSHA regulated policies and procedures. * Maintains outstanding attendance record. * Adheres and promotes the Clay Lacy Vision, Mission and Values daily. * Maintains proficiency with tools, techniques and acceptable practices used to perform maintenance and alteration duties. * Documents all work performed including references to technical data used on work order squawk form and other forms as required. * Documents all parts and/or equipment removed from or installed on aircraft on the removal and installation forms. * Ensures material has been properly received prior to installing on aircraft. * Verifies calibrated tooling calibration due date and condition prior to use and verifies material shelf life has not expired prior to use. * Documents identified discrepancies on Discrepancy Collection Form. * Does not deviate from technical data unless appropriate approvals are obtained. * Promotes an efficient and professional work environment. * Participates in Continuous Improvement projects as directed. * Needs to be available to work different shifts and weekends as requested. * Able to travel away from primary facility for training and work. * Performs other duties as assigned. Competencies and Skills * Create strong customer relations and deliver customer-centric solutions. * Take on new opportunities and challenges with a sense of urgency and enthusiasm. * Work collaboratively with others to meet shared objectives. * Communicate a clear understanding of the needs of varied audiences and modes. * Gain the trust and confidence of others through honesty, integrity, and authenticity. * Ability to effectively communicate with management, peers and external parties * Ability to prioritize and organize workflow * Maintains shop facility, equipment and tooling when required. * Works independently on projects when required. * Excellent verbal and written communication skills * Ability to multi-task * Known for working well with all levels of managers, staff, clients and vendors * Ability to handle sensitive documents in a very confidential manner * Demonstrated analytical and critical thinking skills * Ability to take initiative and execute assigned tasks in a timely and flawless manner * Strong teamwork acumen with a profound ability to work under extreme pressure * Strong passion for working in a fast paced and result oriented environment * Exceptional interpersonal skills Qualifications Required Education and Experience * Airframe and Powerplant Certificate required. * 6+ years of experience, Corporate/Business Jet experience strongly preferred. Additional Requirements * Comply with all Federal Aviation regulations, company operations manual, operations specifications, standard operating procedures, and company policies & procedures. * Must be able to pass DOT/FAA drug screening, background checks and submit to random drug/alcohol test when required. Disclaimer Statement Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. This job description may not cover or contain a comprehensive listing of all assigned activities, duties, or responsibilities, and may be amended at any time. Employees may be required to perform other job-related assignments as requested. Americans with Disabilities Act (ADA) Statement In compliance with the Americans with Disabilities Act (ADA), Clay Lacy Aviation provides reasonable accommodation when requested by qualified individuals with disabilities unless such accommodation would cause an undue hardship. We encourage both prospective and current employees to discuss potential accommodation with a representative of the Office of Human Resources. Equal Employment Opportunity (EEO) Statements Clay Lacy Aviation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Thales people architect solutions that enable two-thirds of planes to take off and land safely. We create in-flight entertainment systems that engross 50 million fliers every year and we develop the avionics that control the world's largest commercial aircrafts. Our simulators train the next generation of pilots for fighter jets, transporters and search and rescue helicopters. And, together, each and every member of our aerospace team makes a difference. Aircraft Engineer | Electrical (New Graduate) Irvine, California, USA (Onsite) Position Summary Thales is seeking an Aircraft Engineer (New Graduate) to perform aircraft installation engineering and participate in the design, development, and integration of aircraft In-Flight Entertainment and Connectivity Systems and components through engineering analysis, research and design. In this position, you will support Type Certificate (TC) and/or Supplemental Type Certificate (STC) program developments and installations, as well as provide sustaining engineering to airline Customers. The Engineer will provide oversight of outside engineering companies assisting in the development of system design and aircraft integration of Thales In-Flight Entertainment systems. Key Areas of Responsibility * Design Engineering - Supports Development and Generation of Design data and documentation. * Installation/Integration Engineering Design. * Develop engineering design and processes for installing Thales InFlyt Experience products onto a variety of airframes. * Evaluates existing approved design data to incorporate into new projects to reduce schedule and increase quality. * Certification/Qualification - Work with Senior Engineers and leads to develop Acceptance Test Plans, Qualification Plans, and DDPs. * System Engineering - Gains a working knowledge of Thales IFE Systems and integrating systems in order to triage problems or customer requests. Minimum Qualifications * Bachelor's Degree in Mechanical, Electrical, Aerospace, or Aeronautics Engineering, or related discipline. * Experience using 2D and 3D CAD required. * Minimum 1 years of experience working with aircraft Original Equipment Manufacturer (OEM) documentation, and an understanding of aircraft structures and/or electrical systems. * Ability to read and follow a Wiring Diagram. * Experience in initiating and completing product changes using a product life cycle management system. * Be proficient using a computer, Microsoft Office Suite and other office equipment. Why Join Us? Say HI and learn more about working at Thales click here. #LI-AG1 #LI-Onsite This position will require successfully completing a post-offer background check. Qualified candidates with [a] criminal history will be considered and are not automatically disqualified, consistent with federal law, state law, and local ordinances. Thales champions inclusion and we believe diversity strengthens the fabric of our culture. Thales is an Equal Opportunity Employer, including disability/veterans. If you need an accommodation or assistance in order to apply for a position with Thales, please contact us at ************************************. The reference Total Target Compensation(TTC) market range for this position, inclusive of annual base salary and the variable compensation target, is between This reflects how companies in a similar industry and geographic region generally pay for similar jobs. This range helps the Company make pay decisions as one data point among many. Where a position falls within this range is also dependent on other factors including - but not limited to - the employee's career path history, competencies, skills and performance, as well as the company's annual salary budget, the customer's program requirements, and the company's internal equity. Thales may offer additional benefits and other compensation, depending on circumstances not related to an applicant's status protected by local, state, or federal law. (For Internal candidate, if you need more information, please reach out to your HR Shared Service, 1st Point) Thales provides an extensive benefits program for all full-time employees working 30 or more hours per week and their eligible dependents, including the following: * Elective Health, Dental, Vision, FSA/HSA, Voluntary Life and AD&D, Whole Group Life w/LTC, Critical Illness, Hospital Indemnity, Accident Insurance, Legal Plan, Identity Theft, and Pet Insurance * Retirement Savings Plan after 30 days of employment with a company contribution and a match, and with no vesting period * Company paid holidays and Paid Time Off * Company provided Life Insurance, AD&D, Disability, Employee Assistance Plan, and Well-being Program

We are seeking a highly skilled and motivated B1 Licensed Aircraft Engineer to join our team. In this role, you will be responsible for ensuring the safety, airworthiness, and operational readiness of aircraft. As a B1 Licensed Aircraft Engineer, you will work closely with a team of engineers and technicians, providing technical expertise for the maintenance and repair of aircraft systems, including the structure, engines, and mechanical systems. Your key responsibilities will include troubleshooting, performing routine maintenance, and conducting complex inspections to meet both regulatory standards and our operational excellence. If you are a detail-oriented professional with a passion for aviation, this position offers an exciting opportunity to work in a fast-paced, dynamic environment. Key Responsibilities:Perform scheduled and unscheduled maintenance tasks on aircraft in accordance with company and regulatory guidelines.Troubleshoot and repair aircraft systems, including hydraulic, pneumatic, and mechanical components.Conduct pre-flight and post-flight inspections to ensure aircraft safety and compliance.Diagnose issues and determine the necessary course of action for repairs or replacements.Complete maintenance logs and reports accurately to document all work performed.Work closely with flight crews to ensure the timely and safe return of aircraft to service.Ensure that all tools, equipment, and facilities used in maintenance are kept in good condition and properly calibrated.Supervise and mentor junior maintenance staff and technicians.Liaise with regulatory authorities during inspections and audits.Stay updated on industry regulations and technology advancements. Qualifications:Valid EASA Part 66 B1 License (or equivalent recognized by local aviation authorities).Strong knowledge of aircraft systems, including engines, landing gear, airframes, and associated mechanical and hydraulic systems.Minimum of 3 years of experience working on aircraft maintenance, repairs, or modifications.Experience with both scheduled and unscheduled maintenance.Ability to read and interpret technical manuals, blueprints, and engineering drawings.Excellent troubleshooting and problem-solving skills.Strong attention to detail and commitment to safety.Ability to work in a fast-paced environment with minimal supervision.Excellent communication skills and ability to work as part of a team. Preferred Qualifications:EASA Part 66 B1 License or equivalent qualification (e.g., FAA A&P License, CAA B1 License).Aircraft Type Ratings on relevant aircraft models (e.g., Airbus, Boeing, Bombardier, etc.).Valid Human Factors certification.Current EWIS (Electrical Wiring Interconnection System) certificate.Fuel Tank Safety certification (Level 1 and 2 preferred).Updated training on relevant regulations (Part 145, Part M, etc.).Type ratings on multiple aircraft types.Experience in both line and base maintenance environments.Certification in advanced aircraft systems troubleshooting techniques.

This position works as an A&P mechanic team member performing inspections, repairs and preventative maintenance on piston aircraft. The successful A&P aviation mechanic candidate will possess the appropriate personality to work in a fast-paced environment while maintaining a constant focus on safety and quality. Technicians will also possess the ability to dynamically move through a computerized logbook management system, adhere to the maintenance and manufacturer manuals, and make safety-focused decisions on a day-to-day basis. We need an A&P mechanic that can fit in quickly, have a positive attitude, and have General Aviation experience working on piston powered aircraft; preferably Cessna and Piper. Responsibilities Perform efficient troubleshooting, aircraft maintenance, and repair in accordance with applicable regulations, manufacturer's instructions, and company policies Ensure consistent, accurate aircraft maintenance records by properly documenting & completing required forms, computer entries, and logbook entries Follow all policies and procedures Keep a clean and orderly work environment Perform job duties in a safe manner Perform other duties as assigned RequirementsMinimum Qualifications Airframe and Powerplant (A&P) Certificate 2 or more years of piston-powered aircraft maintenance experience Knowledge and understanding of Federal Aviation Regulations and manufacturer manuals Possess adequate tools Desired Qualifications FAA Inspection Authorization Private pilot's license Avionics troubleshooting experience (Garmin integrated avionics) Physical Demands Squat/kneel for extended periods Make fast, repeated movements of fingers, hands, and wrists Stand for extended periods Lift/carry more than 50 pounds of various items Maneuver body to enter confined spaces Bend, stretch, twist, or reach out Use stomach and lower back muscles to support the body for long periods without getting tired Move two or more limbs together (for example, two arms, two legs, or one leg and one arm) while remaining in place Be physically active for long periods without getting tired or out of breath Keep or regain the body's balance or stay upright when in an unstable position Climb to enter and exit aircraft using aircraft step/handles Make quick, precise adjustments to machine controls Climb and stand on ladders Walk Read Push/Pull Speak Bend/Stoop Hear Write Background check and drug screening BenefitsBenefits Offered Pay commensurate with experience $15,000 Employer Paid Life Insurance Medical coverage (Employer pays 60% of total premiums) Dental/Vision/Life Insurance Critical Illness and Accident Insurance Employer-Paid Long-Term Disability Insurance Short-Term Disability Insurance 401(k) Enrollment (100% Vested with no employer contributions) 8 Paid Holidays (New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Thanksgiving Friday, Christmas Eve and Christmas Day) 13 Paid Time Off Days per Year (PTO is earned on an accrual-based system, you accumulate a little over 1 day of PTO for each month you work. Accrued PTO may be requested upon successful completion of 90 days of employment.) 5 additional Paid Time Off Days per Year after 5 years of service (18 days total) 5 more Paid Time Off Days per Year after 10 years of service (23 days total)

Job Details HRD Ca - Valencia, CA Full Time High School $21.00 - $23.00 Hourly None AerospaceDescription HRD Aero Systems offers world-class service for the Aviation industry. We service aviation safety equipment, including fire extinguishers, oxygen systems, and inflatables as well as outright PMA Part sales that make people's lives safer. It is our goal to make work meaningful for people everywhere, we work to ensure our team reflects the diversity of the businesses we serve. Job Summary: Under general supervision the technician is responsible for the assembly and repackaging of inflatable products in accordance to the Original Equiptment Manufacturing (OEM) specifications and written procedures. Responsibilities: Read and interpret data, manuals, or other materials to determine specifications, inspection, and testing procedures, accept units that are to be maintained from the receiving inspection process, ensure all items are accounted for and the assembly is ready for packing. Perform duties such as manual lifting, pulling, pushing, and tugging to repackage articles, use proper tooling to repackage inflatables in accordance with OEM/CMM and/or approved data. Insert units into oven, when necessary, work in conjunction with inspector to provide continuity in packing process, ensure that all parts and components are in airworthy condition prior to packing. Measure dimensions and/or use templates to verify specified dimensions or settings meet OEM guidelines, confirm all packing aids are accounted for. Completes documents and forms applicable to the work task. Carry out duties in accordance to QCM/RSM written specifications and procedures. Ensure any relevant Airworthiness Directives (AD's) are applied. Check that Service Bulletins are complied with when applicable to the required task. Maintain working area in an organized and neat condition, observe and follow all safety rules and policies. Maintain an acceptable level of productivity as determined by department requirements and provide team member support. Qualifications Requirements: Previous inflatable packing experience (i.e parachute, marine raft, etc), good hand-eye coordination, able to read a tape measure and have basic math skills, able to work in team environment, ability to read, write & understand English, an eye for detail. Trained in qualified in accordance with OJT requirement, ability to read interpret documents such as safety rules, procedure manuals. Physical Requirements: Required to frequently stand, bend, stooping, squatting, pushing/pulling, kneeling and walking; the employee will intermittingly sit; frequently use hands to handle, grasp, squeeze or feel; reach with hands and arms; must see in the normal visual range of the unit with or without correction; hear in the normal audio range with or without correction. Continuously bend, twist, and kneel; ability to lift and carry up to 50 lbs with assistance. Schedule: Monday - Friday 6:00am - 2:30pm Benefits: 401K Health and Wellness Insurance, Flexible Spending Account, Life Insurance, Referral Program, Employee Assistance Program HRD offers great benefits that include medical, dental, and vision insurance, vacation and sick time, holiday benefits, and contributing 401k with match! HRD is focused on putting people first … from our employees to our customers and their customers. HRD is an equal opportunity organization that embraces diversity. Apply to join our team today!

West Star is the fastest growing maintenance repair organization in the industry and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. What you can expect as a Lead Aircraft Maintenance Technician at West Star: As a Lead your main focus will be centered on leading a team of technicians to produce timely results that are of the highest quality and accuracy. The most successful individuals will be highly analytical, inquiring and have a critical mind. This job requires imagination and strong problem solving skills, with a strong technical orientation. Getting the job done and getting it done right are the two, equal, drivers for this job. Effectively utilizing manpower and directing project flow will be your primary function. You will be ESSENTIAL to many FUNCTIONS including: * Lead the team to complete the necessary jobs/tasks. This includes using good judgement in handling day-to-day tasks, and knowing when to involve your manager * Implement a strong turnover of work to the next shift * Look for opportunities (within your area of responsibility) to reduce turn time of aircraft * Help to train/mentor those technicians assigned to your projects * Supervise team members in daily work load. * Work independently on projects and lead multiple projects as assigned. Schedule and work quality are essential in these functions, as is showing excellent drive and initiative. * Perform general mechanical functions on aircraft and related systems. This shall include, but not be limited to items such as removal and installation of panels and components, repair work and sheet metal repair or installation. * Troubleshooting and evaluation of systems on the aircraft when designated. * Inspection and evaluation of the aircraft and components when designated. * Aircraft movement, performance runs and taxiing when required. * Maintenance and repair of shop facility, equipment and tooling to support operations. * Work with customer in project management, pricing and customer support roles. * Willing to travel 25% of your time (both foreign and domestic) * Effectively and clearly communicate (i.e., speak, write, read) in English * Any other job-related duties as assigned by supervisor or management. What you'll need to bring with you: Your Education A High school diploma or equivalent and Airframe and Powerplant License are required. A valid driver's license approved for airline travel and/or a valid passport is ideal, but not mandatory. Aircraft specific factory training is preferred. Your Experience 5+ year's prior experience aircraft maintenance to include involvement in supervision of four or more team members. An advanced knowledge of FAA paperwork, work orders and use of Corridor systems. Your Initiative: We're looking for a team player who is self-motivated and able to perform in a fast paced environment where working under specific deadlines and time constraints will be common. Your Sense of Responsibility: Attend work every day as scheduled to include overtime and weekend assignments. Notify supervisor in advance of shift starting if unable to work. Must have reliable transportation to get to work each and every day. Must perform all work in accordance with Federal Aviation Administration guidelines. Follow all company and safety rules during performance of duties. Maintain customer oriented work habits. Direct the work and flow of multiple projects. Supervision of team members in daily operations and duties. Completion of work orders, FAA paperwork.

About Us ATP is the nation's largest flight school, providing students with the most efficient path to a successful airline pilot career. For over 35 years, ATP has been the leader in professional flight training and supplying pilots to regional and major airlines. The role The Aircraft Mechanic position works as a team member performing inspections, repairs and preventative maintenance on piston flight training aircraft. The successful candidate will possess the appropriate personality to work in a fast-paced aviation environment while maintaining a constant focus on safety and quality. A&P Mechanics will also possess the ability to dynamically move through ATP's computerized logbook management systems, adhere to the maintenance and manufacturer manuals, and make safety-focused decisions on a day to day basis. Responsibilities Perform efficient troubleshooting, aircraft maintenance, and repair in accordance with applicable aviation regulations, manufacturer's instructions, and company policies Ensure consistent, accurate aircraft maintenance records by properly documenting & completing required forms, computer entries, and logbook entries Follow all policies and procedures Keep a clean and orderly work environment Perform job duties in a safe manner Perform other duties as assigned Qualifications Airframe and Powerplant (A&P) Certificate 2 or more years of piston-powered aircraft maintenance experience Knowledge and understanding of Federal Aviation Regulations and manufacturer manuals Possess adequate tools FAA Inspection Authorization Private pilot's license Avionics troubleshooting experience (Garmin integrated avionics) Benefits ATP offers a comprehensive employee benefits program, including: $5k sign bonus for Certificated AMTs $1k sign on bonus for Apprentice AMTs Starting pay commensurate with experience Employer Paid Life Insurance Medical coverage (Starting day one!) Dental/Vision/Life Insurance (Starting day one!) Critical Illness and Accident Insurance Short-Term and Long-Term Disability Insurance 401(k) Enrollment (100% Vested with no employer contributions) 8 Paid Holidays 13 Paid Time Off Days per Year (PTO is earned on an accrual-basis) Physical Demands The physical demands described here must be met by an employee to successfully perform the essential functions of this job. The employee is regularly required to talk, hear, see, stand; walk; use hands to finger, handle or feel; and reach with hands and arms, lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. ATP is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #ATP123

Location: Irvine, United States of AmericaThales people architect solutions that enable two-thirds of planes to take off and land safely. We create in-flight entertainment systems that engross 50 million fliers every year and we develop the avionics that control the world's largest commercial aircrafts. Our simulators train the next generation of pilots for fighter jets, transporters and search and rescue helicopters. And, together, each and every member of our aerospace team makes a difference. Aircraft Engineer | Electrical (New Graduate) Irvine, California, USA (Onsite) Position Summary Thales is seeking an Aircraft Engineer (New Graduate) to perform aircraft installation engineering and participate in the design, development, and integration of aircraft In-Flight Entertainment and Connectivity Systems and components through engineering analysis, research and design. In this position, you will support Type Certificate (TC) and/or Supplemental Type Certificate (STC) program developments and installations, as well as provide sustaining engineering to airline Customers. The Engineer will provide oversight of outside engineering companies assisting in the development of system design and aircraft integration of Thales In-Flight Entertainment systems. Key Areas of Responsibility Design Engineering - Supports Development and Generation of Design data and documentation. Installation/Integration Engineering Design. Develop engineering design and processes for installing Thales InFlyt Experience products onto a variety of airframes. Evaluates existing approved design data to incorporate into new projects to reduce schedule and increase quality. Certification/Qualification - Work with Senior Engineers and leads to develop Acceptance Test Plans, Qualification Plans, and DDPs. System Engineering - Gains a working knowledge of Thales IFE Systems and integrating systems in order to triage problems or customer requests. Minimum Qualifications Bachelor's Degree in Mechanical, Electrical, Aerospace, or Aeronautics Engineering, or related discipline. Experience using 2D and 3D CAD required. Minimum 1 years of experience working with aircraft Original Equipment Manufacturer (OEM) documentation, and an understanding of aircraft structures and/or electrical systems. Ability to read and follow a Wiring Diagram. Experience in initiating and completing product changes using a product life cycle management system. Be proficient using a computer, Microsoft Office Suite and other office equipment. Why Join Us? Say HI and learn more about working at Thales click here . #LI-AG1 #LI-Onsite This position will require successfully completing a post-offer background check. Qualified candidates with [a] criminal history will be considered and are not automatically disqualified, consistent with federal law, state law, and local ordinances. Thales champions inclusion and we believe diversity strengthens the fabric of our culture. Thales is an Equal Opportunity Employer, including disability/veterans. If you need an accommodation or assistance in order to apply for a position with Thales, please contact us at ************************************. The reference Total Target Compensation(TTC) market range for this position, inclusive of annual base salary and the variable compensation target, is between This reflects how companies in a similar industry and geographic region generally pay for similar jobs. This range helps the Company make pay decisions as one data point among many. Where a position falls within this range is also dependent on other factors including - but not limited to - the employee's career path history, competencies, skills and performance, as well as the company's annual salary budget, the customer's program requirements, and the company's internal equity. Thales may offer additional benefits and other compensation, depending on circumstances not related to an applicant's status protected by local, state, or federal law. (For Internal candidate, if you need more information, please reach out to your HR Shared Service, 1st Point) Thales provides an extensive benefits program for all full-time employees working 30 or more hours per week and their eligible dependents, including the following: •Elective Health, Dental, Vision, FSA/HSA, Voluntary Life and AD&D, Whole Group Life w/LTC, Critical Illness, Hospital Indemnity, Accident Insurance, Legal Plan, Identity Theft, and Pet Insurance •Retirement Savings Plan after 30 days of employment with a company contribution and a match, and with no vesting period •Company paid holidays and Paid Time Off •Company provided Life Insurance, AD&D, Disability, Employee Assistance Plan, and Well-being Program