Aircraft mechanic jobs in Grand Forks, ND - 227 jobs

As a Factory Service Center Aircraft Maintenance Technician you will work from an assigned Factory Service Center performing aircraft scheduled and unscheduled maintenance, modifications and repairs along with a variety of diagnostic and mechanical duties as assigned. All work will be performed and documented in compliance with / reference to the appropriate technical data including manuals, standard operating procedures and regulations as required. Working conditions include occasional travel and semi - frequent face to face contact with Owners and Operators. Duties and Responsibilities/Essential Functions * Adhere to Cirrus Aircraft Standard Operating Procedures * Cirrus training requirements * Complete 100% Cirrus CBT Training (within 90 days) * Complete 100% Cirrus University training (as directed) * 25% proficient on core task lists SR & SF (up to 36 months) * Comply with environmental health / safety policies and procedures * Maintain the highest levels of professionalism in conduct and appearance while representing Cirrus Aircraft. * Observe & maintain all requirements & criteria set forth by the Cirrus Part 145 Repair Station Manual. * Read and understand maintenance manuals and other technical documents and identify repair procedure * Perform mission critical repairs, troubleshooting & return to service work on AOG aircraft in the field IAW FAA regulations & all applicable technical data * Review and research aircraft records * Evaluate & interpret aircraft data * Diagnose mechanical / electrical systems * Utilize proper diagnostic / test equipment * Inspect replacement aircraft parts for defects * Replace defective parts using approved tooling * Assemble aircraft components & perform required measurement and testing / adjustments * Install / load system software and databases * Inspect complete work for compliance and performance standards * Assist, support and participate in Factory Service Center indirect activities such as moving aircraft, shop projects, and continuous improvement projects as assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Education Requirement(s): * High school diploma or GED * AMT or 2 year education preferred Experience Requirement(s): * 0-4 years' proven aircraft maintenance experience Certification Requirement(s): * Must have CFR part 65 Certification - Repairmen or A&P License Requirement(s): * FAA Airframe & Powerplant * Valid State Drivers License * Ability to obtain an Airport Security Badge Competencies To perform the job successfully, an individual should demonstrate the following competencies: * Ensures Accountability: Holds self and others accountable to meet commitments. * Plans and aligns - Plans and prioritizes work to meet commitments aligned with the organizational goals * Instills Trust: Gains the confidence and trust of others through honesty, integrity and authenticity. * Ensure Exceptional Customer Service: Energizes the Cirrus Services Essentials Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week may be required. ABOUT CIRRUS AIRCRAFT Cirrus Aircraft is the recognized global leader in personal aviation and the maker of the best-selling SR Series piston aircraft and the Vision Jet, the world's first single engine Personal Jet and recipient of the 2017 Robert J. Collier Trophy. Founded in 1984, the company has redefined performance, comfort and safety in aviation with innovations like the Cirrus Airframe Parachute System (CAPS) - the first FAA-certified whole-airframe parachute safety system included as standard equipment on an aircraft. To date, worldwide flight time on Cirrus aircraft has passed nine million hours and over 170 people have returned home safely to their families as a result of the inclusion of CAPS as a standard feature on all Cirrus aircraft. The company has three locations in the United States, located in Duluth, Minnesota, Grand Forks, North Dakota and Knoxville, Tennessee. Find out more at *********************** OUR BENEFITS Cirrus offers a competitive benefits package that includes: health, dental, life, short and long-term disability insurance, flexible spending account, 401K retirement savings plan, voluntary vision, Employee Referral Incentive Program, vacation and holiday pay. Additionally, all employees enjoy a discount at the company store and exclusive discounts from our world-class partners, like Garmin, Bose, AT&T, Microsoft, Fastenal and more. This position is located in Duluth, Minnesota. As the home to our corporate headquarters, Duluth is a four-season city on the western tip of Lake Superior and was voted Best Town by Outside Magazine. The splendor of the largest freshwater lake in the world offers a multitude of outdoor activities for adventure or rejuvenation. The North Shore lifestyle is known its year-round activities, including bicycle and snowmobile trails, kayaking, rock climbing, fishing, hiking, golfing, sailing and skiing. And as a top employer in the area, Cirrus Aircraft was recently named "Best Overall Large Company to Work for in the Northland" and "Best Workplace Culture" by the Duluth News Tribune readers. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

Classification $15.00 to $25.00 hour Hourly, Non-Exempt (Eligible for overtime) 10 hours per week 100% Remote Work Availability: No Hybrid Work Availability: No This is a part-time, not-benefited position. Candidates with your A&P (Airframe & Powerplant degree) or are working towards it, this is the place to be! UND Aerospace (University of North Dakota) operates one of the largest fleets of civilian aircraft in North America. Our current fleet consists of over 100 aircraft that include Piper Archers, Piper Seminoles, Robinson R44 helicopters, Cessna 172's, Cessna 150's, American Champion Decathlons, and Beech King Airs. UND Aerospace is a world-renowned center for aerospace learning, nationally acclaimed for our achievements in collegiate aviation education, atmospheric research, space studies, earth system studies and policy research. With more than 500 faculty and staff members, 1,800+ students from around the world, and myriad programs and projects, UND Aerospace is setting the pace for the future of flight. Our aircraft maintenance department employs 45-50 employees including Aircraft Technicians, Quality Control Inspectors, Avionics staff, Training staff, Inventory Control staff and Aircraft Detail staff. We operate as an FAA Part 145 Repair Station, performing all work to the highest standards. We have a state of the art 14,520 square foot hangar that has white polyurethane painted floors with floor heat and radiant heat. UND Aerospace is a great place to work! Duties & Responsibilities Aircraft Technicians are responsible to work with the Aircraft Maintenance Supervisor. Perform maintenance inspections, repairs, overhauls, or alternations of products or aircraft in accordance with the Repair Station Manual (RSM) and current FAR's, manufacturer's data drawings, specifications, and bulletins or other technical data acceptable to the FAA. Creating work orders and ensuring proper paperwork is obtained. Making necessary entries on the Maintenance Department's maintenance forms. Airworthiness Directives to determine applicability and compliance. Troubleshooting and correcting discrepancies involving the airworthiness of an aircraft. Moving aircraft in and out of the maintenance hangar as necessary. Assisting personnel in proper work procedures and practices. Returning shop towels, support equipment, and expendable materials to Inventory Control at the end of the shift. Keeping workplace in a clean and orderly manner. Using approved Minimum Equipment List (MEL) as per part 135 and part 91 deferrals when required to return aircraft to service. Required Competencies Must be able to work independently Must have flexible work schedule Good interpersonal / oral / written communication skills. Attention to detail. Computer skills. Minimum Requirements Must have an Airframe and Powerplant (A&P) degree, or going to school to obtain the A&P. Successful completion of a Criminal History Background Check In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the US and to complete the required employment eligibility verification form upon hire. To Apply For full consideration, applications must be received by the closing date and include the following materials: Resume Contact information Work availability and schedule PLEASE NOTE: For a successful screening, be sure to review all of the position minimum requirements above and outline how you meet those requirements in your application packet. Additional information may be attached if needed.

Job title A&P Mechanic; [23021 - Aircraft Mechanic I] Fargo, ND Reports to Shop Supervisor Job purpose Alpine Air is currently seeking full time A&P Mechanics to join the crew at the Fargo, North Dakota company location. Candidates must meet our high standard of excellence for safety, resource management skills, and customer relations. Candidates must have strong interpersonal skills and a team player attitude. Duties and responsibilities The selected applicant will be responsible for but not limited to the following duties: Preventative maintenance of aircraft Line maintenance and repair Scheduled inspection of aircraft Replacing worn or damaged components, including turbine engine changes Basic mechanical and electrical troubleshooting Repairing, replacing, and rebuilding aircraft structures, including repairs involving aircraft sheet metal Qualifications Qualifications include: Must have A & P License Must have 2 years' experience as an A&P, with recent turboprop aircraft Preference given to Beech 1900 or King Air experience Knowledgeable of basic fixed wing aircraft maintenance Ability to locate and follow maintenance manual directions and component manuals Basic computer skills, including Microsoft Word Must pass background check and pre-employment drug screen Must have High School Diploma or Equivalent Must be eligible to work in the U.S. Working conditions While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes, toxic chemicals, and heat. Work for this position is performed outside, regardless of weather conditions. The noise level in the work environment is usually moderate. Compensation This position is a Full-Time position, 35-40 hours per week. Alpine Air offers competitive compensation and 401(k) with employer match. Generous Paid Time Off, eight (8) paid holidays per year, Medical, Dental, Vision, and Life Insurance are available immediately upon employment. Physical requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 70 pounds. The employee must be able to frequently bend, twist, lift, and practice safe lifting methods. Specific vision abilities required by this job include close vision, distance vision, color vision, and ability to adjust focus. Approved by: Max Crandall - Director of Human Resources Date approved: 03/02/2022 Reviewed: 03/02/2022 ALPINE AIR IS AN EQUAL OPPORTUNITY/AFFIRMATIVE ACTION EMPLOYER. Prospective employees will receive consideration for employment without discrimination on the basis of race, color, religion, sex, age, national origin, ancestry, disability, veteran status, or any other factor prohibited by law or regulation. Potential candidates will be required to pass a pre-employment drug test prior to receiving an offer of employment. This employer participates in E-verify. Alpine Air will provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's I-9 to confirm work authorization.

Job Description Our client has been synonymous with dependability and quality in the air freight industry since 1986. As the company has grown, so has the number of industries it serves. Today, the company continues to provide the most excellent customer care-driven service to the air freight industry and many others. By carrying over the core belief structure forged in the air freight business of providing the customer what they want on time and at a competitive rate, our client can provide superior air freight services to our growing list of satisfied customers. They are currently recruiting for an A&P Mechanic job in Milwaukee, WI. What Is In It For You Position Type: Permanent - Full-time Benefits: Health, Dental, Vision, Life, STD/LTD, Vacation Pay, Sick Pay, Holiday Pay, 401(k) A Day In The Life of an A&P Mechanic The position you are applying for will be under general supervision. You are responsible for the maintenance, modification, and servicing of aircraft and aircraft components following the manufacturer's specification and FARS. Essential Duties of The A&P Mechanic Perform routine scheduled maintenance and aircraft inspection by ACC's and current manufacturers' specifications. Read and interpret aircraft maintenance manuals and specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components. Modifies aircraft systems or components following drawings, engineering orders, and technical publications. Assemble and install electrical, mechanical, hydraulic, and structural components and accessories using hand and power tools. Provide emergency/unscheduled repairs to minimize aircraft downtime. Requires ability to travel. Review maintenance records and flight logs to schedule prescribed maintenance checks and overhauls. Process all necessary documentation and paperwork for processes completed. Follow all clean-up and housekeeping procedures. Comply with all quality, safety, and sanitation regulations. JOB SPECIFICATIONS Minimum Education: High School Diploma or equivalent Preferred Education: One to two years of technical college/training or equivalent Certifications/Licenses: FAA Airframe and Powerplant Minimum Experience: Up to three to five years or more experience Preferred Experience: Up to six years or more experience Skills: Interpret drawings, specifications, and schematics of aircraft parts/components. Problem-solving and independent decision-making skills Good communication skills Exercise good judgment in working with people in a team environment as well as in aircraft maintenance and safety. Machine Skills: Operate hand and power tools Calculator, PC, telephone, and fax machine Environmental Conditions: Exposure to weather. Work may be performed of doors Physical Demands: Ability to climb ladders, sit-stand, crouch bend for extended periods Physical Strength: Vision Requirements: Accommodation: The ability to adjust vision to bring objects into focus Communication: Communicate effectively with others in the work environment and external customers Representation: Represent the company in a professional and positive manner Contacts: Exchange information with employees and external customers If you are interested in the A&P Mechanic job in Milwaukee, WI, apply today! This vacancy is being advertised by Total Aviation Staffing, LLC. The services advertised by Total Aviation Staffing, LLC are those of an Employment Agency

Job Description Are you ready to leverage your military experience working on aircraft into an exciting new career? Are you an aircraft mechanic eager to work in a unique and rewarding environment? Have you recently received-or are about to receive-your A&P certification and are ready to launch your career? At Wipaire, we're leaders in engineering and manufacturing aircraft floats that transform standard airplanes into versatile seaplanes. Our products support critical passenger service, tourism, and firefighting missions globally - and you can be a key part of this mission. Be part of a proud 65-year-old company investing heavily in people, products, and technology - all while manufacturing 100% American-made products. Why Join Us? Competitive pay: $25.32 to $41.87/hour for Aircraft Technicians and $28.00 to $46.16/hour for A&P Mechanics based on your skills, experience, education, and other qualifications. Robust benefits package including health, dental, 401(k) with match, tuition reimbursement, life insurance, disability coverage, PTO starting at 15 days, holiday pay, and more. Work a steady first shift with a friendly, family-focused team that values work/life balance. Check out: ********************************************************* to view videos and see what Wipaire is all about! Job Duties: 1.Performing a variety of aircraft maintenance tasks, including: Conducting annual aircraft inspections and documenting maintenance needs. Executing repairs and maintenance per workbook instructions, Wipaire standards, industry best practices, and FAA regulations. Maintaining and repairing aircraft components; assembling and installing flight controls, engines, pneumatics, fuel, electrical, plumbing, mechanical, hydraulic systems, and related accessories. Repairing and modifying aircraft structures and structural components. Applying technical expertise to diagnose equipment malfunctions by inspecting components such as landing gear, hydraulic systems, and de-icers for cracks, leaks, or other defects. Maintaining, repairing, and rebuilding aircraft structures, floats, functional components, and parts-including wings, fuselage, rigging, hydraulic units, oxygen and fuel systems, electrical systems, gaskets, and seals. Utilizing comprehensive technical knowledge to resolve moderate to complex issues through interpretation of blueprints, technical manuals, and manufacturer documentation. Ensuring all maintenance activities comply with safety and regulatory requirements. Accurately documents all preventive and corrective maintenance performed on aircraft as required. Airframe & Power Plant (A & P) license preferred, but not required. Ability to meet FAA regulatory and safety requirements in all aspects of the work. Perform lifting of supplies and equipment weighing up to 50 pounds. Hear, speak and effectively verbally communicate in the English language, including following oral and written instructions, in order to communicate with people inside and outside the organization. Stand, squat, reach, kneel, bend, and twist/turn for extended periods of time and perform long hours of work in the shop and hangar, repairing and maintaining aircraft. Must be able to use hand tools, including wrenches, hammers, power tools, and other tools used in testing aircraft and parts, and a computer, phone, and photocopier. Must have all required tools designated within 90 days of starting employment. Must comply with Wipaire FOD prevention plan Wipaire is an Equal Employment Opportunity/Affirmative Action Employer: Women, minorities, the disabled and veterans are encouraged to apply. Candidates must be legally authorized to work in the United States without sponsorship for employment visa status. Benefits: We will also provide relocation assistance for this position.

Position Title: Aircraft Mechanic Location: Fargo Jet Center - Fargo, ND Shift: Monday-Friday | 8:00 AM - 5:00 PM Join a Leader in General Aviation Fargo Jet Center is a full-service general aviation company based in North Dakota, internationally recognized for excellence in aviation services. Consistently ranked among the top aviation service providers in North America, we are looking for skilled and motivated Aircraft Mechanics to join our team and contribute to our continued success. What You'll Do: As an Aircraft Mechanic at Fargo Jet Center, you'll be responsible for performing both scheduled and unscheduled maintenance on a wide variety of general aviation aircraft, including but not limited to: Piper, Cessna, Pilatus, Hawker, Beechcraft, Gulfstream, Bombardier, and Cirrus. You'll play a key role in maintaining safety, quality, and performance standards while collaborating with a team that takes pride in precision and professionalism. What We're Looking For: Active FAA A&P License required Experience in General Aviation, Commercial, or Military aviation settings is welcome Preference given to candidates with hands-on experience on Cessna, Pilatus, Learjet, King Air, Cheyenne, Citation, and/or Cirrus airframes Responsibilities: Perform high-quality inspections including 100-hour, annual, and phase inspections Diagnoses, test, repair, and maintain aircraft airframes and systems Troubleshoot and perform complex structural fitting and installations Utilize technical data to ensure compliant and accurate maintenance Order parts and components as needed Complete documentation per FAA regulations and company policy Collaborate with the Maintenance Director and Leads; perform other duties as assigned What We Offer: Comprehensive health benefits (Medical, Dental, Vision) HSA and flexible spending programs Life and Accidental Death & Dismemberment insurance (100% Company Paid) Long-Term Disability insurance (100% Company Paid) 401(k) with employer match Paid time off and paid holidays Employee Assistance Program (EAP) and Wellness Program If you're ready to advance your aviation maintenance career with a trusted and dynamic team, apply today and help keep our fleet flying safely! Fargo Jet Center has a Drug Free Workplace Policy which includes applicants passing pre-employment testing. Applicants testing positive for the presence of prohibited drugs are ineligible for employment. FAA and DOT applicants who become employees of Fargo Jet Center will also be subject to random, reasonable cause, reasonable suspicion, and post-accident testing. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

The CBP Aircraft Mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Principal Accountabilities: + Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. + Perform daily, flight line and hangar maintenance on all assigned aircraft. + Perform inspections, corrosion control, troubleshooting and fault isolation on aircraft systems. + Furnish own hand tools to perform maintenance of aircraft (necessary special tools and test equipment will be furnished by Customs). + May occasionally lead teams through more complex aircraft relevant tasks. + May be required to make entries in aircraft logs and records. + Must be able to prioritize workload schedules on assigned projects. Minimum Requirements: + Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. + High School Diploma or equivalent required. + Must hold a current airframe and power plant mechanic (A&P) certificate. + Must be competent and knowledgeable in the repair and maintenance of airframes, hydraulics, fuel systems, and aircraft engines. + Requires broad knowledge of aircraft sheet metal/structural modification and repair. + Must possess a working knowledge of military and general aviation aircraft airframe and engine logbooks. + Must have basic knowledge of electrical theory. + Must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. + Requires working knowledge of technical publications. + Able to follow base, federal and Company procedures for handling and disposal of hazardous waste materials. + Must be proficient in Office software applications to communicate through e-mail and various software applications.; especially Microsoft Outlook, Word, and Excel. + Ability to meet required deadlines and maintain necessary workflow. + Ability to read, write, understand, and communicate in the English language and follow both verbal and written instruction. + Must be able to read, write, speak, and understand English. + The ability to read and write and comprehend/interpret data. Physical Requirements/Working Environment: + Be physically able to perform aircraft mechanic duties. + Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. + Stand, squat, sit, walk, work with arms overhead for extended periods of time. + Pull, push, and lift up to 50 lbs. + On occasions, individuals may also be required to work in areas where high noise hazards prevail, thus requiring the use of adequate ear protection. Compensation: Hourly Rate: $40.81 Benefits: Amentum offers the following benefits for this position, subject to applicable eligibility requirements: medical, dental and vision insurance, 401(k) retirement plan, life insurance, long-term and short-term disability insurance, paid vacation, sick and parental leave. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic III (Avionics/Electrician) Aircraft Mechanic III (23023): Leads a team in the performance of aircraft maintenance, inspections, and scheduled / unscheduled maintenance. Processes the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. Capable of performing, supervising and inspecting the duties of Mechanic Is, IIs and IIIs. A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. ADDITIONAL QUALIFICATIONS/EXPERIENCE REQUIREMENTS: Aircraft Mechanic III (Avionics/Electrician): Electrical Experience: Minimum of Six years total experience in aircraft maintenance as an aircraft avionics/electrician in aircraft/Support equipment related maintenance and one year with lead experience. The Contractor shall have the skill to remove and replace parts and accessories/components and the skill to adjust and settings according to established specifications. The Contractor shall also have the skill to identify and isolate integrated systems malfunctions and analyze performance and operate electrical systems to determine operational condition per operational checks. Experience using specialized tools required for military aviation electrical connector assembly/disassembly and other associated electrical terminating devices is required. Aircraft or Aerospace Ground Support equipment modification and operational checks experience required. Electrical Knowledge: The Contractor shall have the ability to lead and accomplish tasks in accordance with existing published technical data. The Contractor shall have the ability to read and interpret engineering drawings and specifications required to accomplish maintenance tasks and modifications. Knowledge is mandatory of electrical, electronic, microelectronic, mechanical and indicator principles theory, and application relating to electrical systems; concepts and application of maintenance directives; meaning of symbols used in wiring diagrams, blueprints, and schematics; using and interpreting testing and measuring devices; and proper handling, use, and disposal of hazardous waste and materials. Other: The Contractor shall have the ability and qualifications necessary to lead and perform removal and replacement of electrical wiring, electrical connectors, and Operational Checkout. Normal color vision as defined in AFI 48-123, Medical Examinations and Standards is mandatory for this specialty. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: May perform duties as Team Lead Scheduled and unscheduled maintenance Maintenance Control planning and management Aircraft maintenance action documentation via logs, records, forms, and electronic means Support Equipment (SE) operation and inspections Aircraft inspections Troubleshooting General aircraft maintenance Technical Directive compliance and modifications Tool Control Program Tool issue/receipt supporting aircraft maintenance shops including hazardous materials, tool room/box/pouch configuration Maintain Aircraft, Engines, and SE Logbooks Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Requisition repair parts, materials, and consumable supplies through military supply system. Perform other tasks as directed. Preferred Qualifications: Ten or more years' experience in aircraft maintenance Five years' lead experience Advanced Corrosion Control Course Basic Qualifications: Six years Aviation Maintenance experience as an aircraft avionics/electrician in aircraft/Support Equipment related maintenance One year lead experience Must be able to work shift schedules as required per Performance Work Statement (PWS) Must be able work work-week schedules i.e. M-F, Sn-Th or as required per PWS Basic Corrosion Control Course. Must be able to work flexible work-week schedules as required Must be able to pass a background check Must be eligible for Common Access Card (CAC) Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must be able to travel to support off station Temporary Duty (TDY) as required Compensation $41.33/hour Other Compensation Employees will receive a minimum health and welfare fringe benefit of $2.65 for every hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees have a minimum of eleven paid holidays. After completing one year of service, employees will have two weeks paid vacation. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Before you apply to a job, select your language preference from the options available at the top right of this page. Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. Job Description: This position performs aircraft maintenance on UPS fleet to meet or exceed airworthiness standards. Performs the change, removal, replacement, or upgrade of aircraft components to correct failures or implement changes. Conducts troubleshooting of complex pneumatic, hydraulic, engine, and structural components and systems. This position documents procedures per established processes to ensure regulatory compliance. Job Responsibilities * Responsible for the maintenance and preventive maintenance of aircraft * Operate and maintain UPS equipment safely * Run, taxi, and tow aircraft for the purpose of maintenance and repositioning of aircraft as trained and qualified to do so * Determines airworthiness of aircraft and components, in accordance with established procedure and Federal Aviation Regulation * Completes aircraft maintenance forms entries and enters data into a Maintenance Data Systems, ensures entries are accurate and complete * Services and inspects aircraft, components, and related equipment * Ensure consistent, accurate aircraft maintenance by properly completing turnover entries on unfinished maintenance in the turnover log * Follow all Maintenance Department policies and procedures * Keep a clean and orderly work environment * Make recommendations to improve functions within the Maintenance Department * Attend UPS assigned training * Perform other duties as assigned by Line Maintenance Supervisor or the Director of Maintenance Required Qualifications * Must have a High School Diploma or GED equivalent * Must have a valid FAA Airframe and Powerplant license * Must have a valid driver's license * Must have a minimum of three (3) years aircraft maintenance experience that could include but not limited to: * Boeing, Airbus and/or McDonnell Douglas aircraft * Military jet aircraft * Regional /Commuter aircraft * Knowledge of computer systems * Troubleshooting skills and ability to read and interpret Aircraft Manuals and Illustrated Parts Catalogues Federal Aviation Administration required Drug Testing Information (FAA): As part of the UPS pre-employment process for a safety sensitive position, a drug screen is required. UPS Must receive a negative test result before you can be put into a safety sensitive position (14 CFR Part 120.107). Please be advised that you will be tested in accordance with 14 CFR Part 120.109(a)(5) and 14 CFR 120 Subpart E to determine the presence of marijuana, cocaine, opiates (including codeine, heroin-6AM, morphine), opioids-hydrocodone, hydromorphone, oxycodone & oxymorphone, phencyclidine (PCP), and amphetamines/methamphetamines (including MDMA, MDA) or metabolites of these drugs. Starting Pay: $31.14 Benefits: * Competitive weekly pay * Medical, dental, and vision after waiting period * Defined-benefit pension plan * 401(k) * Paid vacation * Paid holidays * Paid Sick and Family and Medical Leave time as required by law * Discounted Employee Stock Purchase Program * Employee Assistance Program * Candidates are interviewed for KOA gateway* Employee Type: Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. Basic Qualifications: Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer. Pay Range:

Job Title: Aircraft Technician Compensation: $18.00-$30.00 per hour - paid weekly Job Type: Temp-to-hire About the Opportunity Doherty Staffing Solutions is hiring Aircraft Technicians for a leading supplier in the aviation industry located in Park Rapids, MN. If you enjoy a fast-paced environment and want reliable hours with weekly pay, this job could be a great fit. Read below for more information!What You'll Do as a Aircraft Technician: Install new hardware and complex products while ensuring that they work correctly and safely Repair broken-down or damaged equipment Perform painting, prepping, taping, grinding, and drilling Use power and hand tools Assess hardware and installation functionality and prepare reports about maintenance and repair work that is performed What You Need to Bring to the Aircraft Technician Role: Ability to repair, replace, or install complex devices in mechanics Ability to correctly diagnosed problems as they arise Knowledge of serving and repair hardware Why You'll Like Working with Doherty Staffing Solutions Enjoy weekly pay, access to health coverage options through Benefits in a Card (including preventative and minimum value plans), and temp-to-hire opportunities for long-term stability where applicable. As a family-owned company with over 45 years in business, we pride ourselves on providing personalized support through a local, dedicated recruiter and maintaining a strong reputation backed by positive online ratings. We are committed to fostering an inclusive workplace and are proud to be an Equal Opportunity Employer, welcoming candidates from all backgrounds and experiences.Ready to Apply? Click "Apply Now" to complete our quick, mobile-friendly application. For questions or additional information on the Aircraft Technician role, please contact our St. Cloud jobs office directly at (320) 253-4473. Doherty Staffing Solutions offers our valued contract employees health coverage through Benefits in a Card (preventative benefit and minimum value plans), along with weekly paychecks via a prepaid card from CHANGE. Learn more and find helpful links to additional resources at www.doherty.com/job-seekers/employee-benefits.

About Sun Country Airlines We're not your average airline. We're agile, resilient, and full of unique opportunity. Here, you can grow as part of an ambitious team that safely and collectively supports each other, our travelers, and our community. Together, we're making travel more attainable. With more than 40 years of Minnesota roots, we're a unique hybrid low-cost carrier offering diverse services including scheduled flights to destinations across the U.S., Canada, Central America, and the Caribbean, as well as charter and cargo operations around the world. At Sun Country, you'll be part of a growing airline and an enthusiastic team focused on connecting our community with their favorite people and places. Sun Country Airlines provides the resources and support our employees need to succeed. Besides working at an exciting and growing company, as an Aircraft Maintenance Technician you'll enjoy these benefits and more: License and Location Premiums in addition to National Base Rate Shift Premium Work 4 days on and have 4 days off schedule - Night Shift Comprehensive benefit package including dental and vision PPO and high deductible health plans Health savings account and Flexible Spending Account Starting day one free standby and discounted travel privileges for employees, family, & friends 401(k) match Paid Time Off Paid holidays Life and AD&D Insurance Employee Assistance Program including counseling for employees and their family Fitness incentive and Stop Smoking Support Aircraft Maintenance Technician Overview: The primary responsibilities of the Aircraft Maintenance Technician is ensuring the ongoing airworthiness of the Sun Country Airlines fleet of aircraft. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential Roles and Responsibilities: Troubleshoot and repair aircraft to Sun Country Airlines standards. Correctly complete paperwork for maintenance performed on aircraft. Enter all log items, NRTCs, and task cards into TRAX. Identify and report problems that could impact daily maintenance operations. Communicate with Maintenance Station Supervisor during all maintenance procedures. Maintain an up-to-date OJT file. Assist with training of newly hired individuals, as necessary. Accomplish housekeeping of maintenance facilities, as required. Move and park aircraft as operations warrant. Move and position ground equipment as needed for the maintenance operation. Conduct all tasks in a safe and efficient manner complying with all local, state, and federal safety and health regulatory requirements, programmatic standards, and with any internal policies and procedures identified by Sun Country Airlines. Required Qualifications: High school diploma or equivalent A&P license required Acceptable driving record required Must be highly motivated and a self-starter Excellent communication, organizational, problem-solving skills Work effectively with minimal supervision under stressful situations Excellent communication, organizational, problem-solving skills Qualified candidates must pass a criminal history background check as well as a pre-employment drug test Must have a valid driver's license Must be able to obtain SIDA badge. Preferred Qualifications: 2 years line maintenance preferred 2 years 737NG jet experience preferred 737NG Familiarization Class preferred 2 years experience in aircraft structural repair preferred Valid US Passport preferred Compensation: $35.94 USD per hour along with a shift differential and sign-on bonus. This is the base compensation hiring range for this role. Classification:  Full-time, Non-exempt Working Location:  This position is open in Minneapolis, MN Supervisory Responsibility: None Work Environment: This job operates in the maintenance hangar and ramp area. This role is routinely exposed to all weather elements. Physical Demands: Work is performed while standing, sitting and/or walking. Requires the ability to communicate effectively using speech, vision and hearing. Requires the use of hands for simple grasping and fine manipulations. Requires bending, squatting, crawling, climbing, reaching. Requires the ability to lift, carry, push or pull medium weights, up to 75 pounds. Requires activities involving being around moving machinery, exposure to marked changes in temperature and humidity, and exposure to dust, fumes and gases. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. AAP/EEO Statement: It is the policy of Sun Country Airlines to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. #LI-KK1

Aircraft Engine Mechanic Build an Aviation Career You're Proud Of Your work ties us all together, helping our teams' function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. As an Aircraft Engine Mechanic, you'll maintain, repair, and overhaul aircraft engines, modules, components and accessories to assure compliance with established company standards, contractual obligations and airworthiness regulatory requirements. Performs technical troubleshooting using mechanical ability and extensive product knowledge. Cross train in other complementary skills as needed to support production requirements. What you'll do: Follow all required standards in the performance of assigned work displaying appropriate competencies in accordance with FAA Regulations, OEM manuals, and related materials. Incumbent is required to meet all training requirements set out in a separate, but specific Training Matrices chart for each job. Duties include but not limited to the following: Conducts necessary troubleshooting and/or repair (either on or off wing) on turbine engines. Disassembly and assembly of various models of turbine engines according to sequence utilizing aircraft tools, balance machines, surface grinders, drill presses, and other equipment for repair and/or overhaul. Receives engine parts to conduct inspections using precision measuring tools in order to detect physical defects such as cracks, burns, foreign object damages, proper screws and structure deviations. Evaluates engine parts to determine which parts are repairable or unrepairable; refers to micrometers and other precision-measurement tests to determine further routing to other destinations or to scrap parts. Inspect aircraft engine parts to determine and/or perform NDT requirements. Utilizes applicable database system in order to retrieve information regarding parts inventory, manufacturing models, serial numbers, and/or other pertinent information to ensure proper documentation. Refers to technical publications, specification sheets and/or other regulatory requirements in order to ensure that all tasks have been completed in proper sequence and required signed-off. Customer contact and travel (up to 25% of the time) may be required. General facility cleaning and maintenance. Position Requirements: 1 - 5 years or more experience in gas turbine engine/components maintenance and repair. FAA Airframe and Power Plant license required or must be acquired within 1 year of job award. Previous engine maintenance experience in the aerospace field on turbine engines. Preferred Characteristics: Engine maintenance experience on Honeywell, Rolls Royce and/or Pratt and Whitney experience preferred. Computer literacy skills are required. Must be able to read, interpret and understand technical manuals, work specifications and written work instructions, ability to read micrometers and other precision-measuring instruments. Ability to express or exchange ideas verbally with pers, clients, and public. Ability to get along with co-workers and peers. Maintenance of regular attendance and punctuality with customary tolerance. Must be authorized to work in the U.S. Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities #LI-GH1

NorthPoint Aviation is invested in growing our employees, and are always looking for Licensed Airframe and Powerplant technicians to join our team. If you're interested in learning more about us, please apply! Willing to train newly licensed personnel to perform job duties listed below. Pay range $50,000 to $70,000 based on experience. Responsibilities Perform work specified on the shop order with efficiency and in accordance with the Repair Station specifications. Test components and systems, using diagnostic tools and special equipment. Diagnose, maintain, and repair systems including engine, propeller, electrical, control systems, wheels, brakes, interior, etc. Communicate directly with senior personnel so that customers are informed if any additional service is needed. Provide an estimate of time needed for additional repairs. Execute repairs under warranty to manufacturer and Repair Station specifications. Great earning potential ($50,000 - $70,000 per year depending on experience) Qualifications Airframe and Power Plant License required. Valid driver's license and clean driving record required. Must complete a pre-employment DOT drug test. High school diploma or equivalent. Dexterity, requiring a steady hand, excellent hand-eye coordination Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment Basic computer competencies Positive, friendly attitude, along with an eagerness to improve Enjoy working in a dynamic environment Teammate with ability to collaborate with others effectively Ability to learn new technology, repair and service procedures and specifications What We Offer Vacation time Health insurance Dental insurance 401K plan Basic life insurance Growth opportunities Community involvement We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

West Star is the fastest growing maintenance repair organization in the industry and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. When you join our team we don't think you should have to wait for your benefits to kick in. That's why when you start, they start with you! This includes medical, dental, 401K match, time off accruals, weekly pay days and much more. We don't want you to live to work, we want you to work and live. What you can expect as an Aircraft Maintenance Technician at West Star: Whether you are replacing or repairing parts, troubleshooting electrical/mechanical/hydraulic and pneumatic systems or performing inspections on some of the most sophisticated civilian aircraft in the world, no day is the same. What is the same, is that each day will bring new experiences and opportunities for growth. You will be ESSENTIAL to many FUNCTIONS including: Performing general mechanical tasks on aircraft and related systems. Removal and installation of panels and components, Troubleshooting and problem solving aircraft system/component issues De-fueling aircraft, Engine removal/installations, Operating ground support equipment, Inspection and evaluation of the aircraft and components Aircraft movement and assistance in performance runs/ taxiing Maintenance and repair of shop facility, equipment and tooling Basic computer skills to be able to navigate electronic training, manuals, and maintenance data bases Any other job-related duties as assigned by supervisor or management. What you'll need to bring with you: Your Education: A High school diploma or equivalent, and Airframe and Powerplant License are required. A valid driver's license approved for airline travel and/or a valid passport is ideal, but not mandatory. Your Initiative: We're looking for team players who are self-motivated and able to perform in a fast paced environment where working under specific deadlines and time constraints will be common. Your Sense of Responsibility: Attend work every day as scheduled to include overtime and weekend assignments. Notify supervisor in advance of shift starting if unable to work. Must have reliable transportation to get to work each and every day. Perform all work in accordance with Federal Aviation Administration guidelines. Follow all company and safety rules during performance of duties. Maintain customer oriented work habits.

As a Factory Service Center Aircraft Maintenance Technician you will work from an assigned Factory Service Center performing aircraft scheduled and unscheduled maintenance, modifications and repairs along with a variety of diagnostic and mechanical duties as assigned. All work will be performed and documented in compliance with / reference to the appropriate technical data including manuals, standard operating procedures and regulations as required. Working conditions include occasional travel and semi - frequent face to face contact with Owners and Operators. Duties and Responsibilities/Essential Functions Adhere to Cirrus Aircraft Standard Operating Procedures Cirrus training requirements Complete 100% Cirrus CBT Training (within 90 days) Complete 100% Cirrus University training (as directed) 25% proficient on core task lists SR & SF (up to 36 months) Comply with environmental health / safety policies and procedures Maintain the highest levels of professionalism in conduct and appearance while representing Cirrus Aircraft. Observe & maintain all requirements & criteria set forth by the Cirrus Part 145 Repair Station Manual. Read and understand maintenance manuals and other technical documents and identify repair procedure Perform mission critical repairs, troubleshooting & return to service work on AOG aircraft in the field IAW FAA regulations & all applicable technical data Review and research aircraft records Evaluate & interpret aircraft data Diagnose mechanical / electrical systems Utilize proper diagnostic / test equipment Inspect replacement aircraft parts for defects Replace defective parts using approved tooling Assemble aircraft components & perform required measurement and testing / adjustments Install / load system software and databases Inspect complete work for compliance and performance standards Assist, support and participate in Factory Service Center indirect activities such as moving aircraft, shop projects, and continuous improvement projects as assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Education Requirement(s): High school diploma or GED AMT or 2 year education preferred Experience Requirement(s): 0-4 years' proven aircraft maintenance experience Certification Requirement(s): Must have CFR part 65 Certification - Repairmen or A&P License Requirement(s): FAA Airframe & Powerplant Valid State Drivers License Ability to obtain an Airport Security Badge Competencies To perform the job successfully, an individual should demonstrate the following competencies: Ensures Accountability: Holds self and others accountable to meet commitments. Plans and aligns - Plans and prioritizes work to meet commitments aligned with the organizational goals Instills Trust: Gains the confidence and trust of others through honesty, integrity and authenticity. Ensure Exceptional Customer Service: Energizes the Cirrus Services Essentials Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week may be required. ABOUT CIRRUS AIRCRAFT Cirrus Aircraft is the recognized global leader in personal aviation and the maker of the best-selling SR Series piston aircraft and the Vision Jet™, the world's first single engine Personal Jet and recipient of the 2017 Robert J. Collier Trophy. Founded in 1984, the company has redefined performance, comfort and safety in aviation with innovations like the Cirrus Airframe Parachute System (CAPS ) - the first FAA-certified whole-airframe parachute safety system included as standard equipment on an aircraft. To date, worldwide flight time on Cirrus aircraft has passed nine million hours and over 170 people have returned home safely to their families as a result of the inclusion of CAPS as a standard feature on all Cirrus aircraft. The company has three locations in the United States, located in Duluth, Minnesota, Grand Forks, North Dakota and Knoxville, Tennessee. Find out more at *********************** OUR BENEFITS Cirrus offers a competitive benefits package that includes: health, dental, life, short and long-term disability insurance, flexible spending account, 401K retirement savings plan, voluntary vision, Employee Referral Incentive Program, vacation and holiday pay. Additionally, all employees enjoy a discount at the company store and exclusive discounts from our world-class partners, like Garmin, Bose, AT&T, Microsoft, Fastenal and more. This position is located in Duluth, Minnesota. As the home to our corporate headquarters, Duluth is a four-season city on the western tip of Lake Superior and was voted Best Town by Outside Magazine . The splendor of the largest freshwater lake in the world offers a multitude of outdoor activities for adventure or rejuvenation. The North Shore lifestyle is known its year-round activities, including bicycle and snowmobile trails, kayaking, rock climbing, fishing, hiking, golfing, sailing and skiing. And as a top employer in the area, Cirrus Aircraft was recently named “Best Overall Large Company to Work for in the Northland” and “Best Workplace Culture” by the Duluth News Tribune readers. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

5K Sign On Bonus For Qualified AMTs About Us ATP is the nation's largest flight school, providing students with the most efficient path to a successful airline pilot career. For over 40 years, ATP has been the leader in professional flight training and supplying pilots to regional and major airlines. Why you'll love working for us No shift work…ever! Monday - Friday day shift only Work with the best and brightest on new Cessna 172s, Piper Archers and Piper Seminoles A fleet size of over 650 aircraft Supportive team culture built around safety-focused decision making Well-equipped facilities with abundant resources (parts, tech data, support, etc.) The role The Aircraft Mechanic role works as a member of a team performing everything from light maintenance to heavy structural repairs on our fixed-winged aircraft. The right candidate will possess a results-driven mindset and the collaborative spirit necessary to ensure efficient workflow while keeping safety and quality as non-negotiable top priorities. Responsibilities Perform efficient troubleshooting, aircraft maintenance, and repairs in accordance with applicable aviation regulations, manufacturer's instructions, and company policies on our single engine and multi-engine piston powered flight training aircraft. Ensure consistent, accurate aircraft maintenance records by properly documenting & completing required forms, computer entries, and logbook entries. Follow all policies and procedures Keep a clean and orderly work environment Perform job duties in a safe manner Perform other duties as assigned Qualifications Airframe and Powerplant (A&P) Certificate 2 or more years of piston-powered aircraft maintenance experience Knowledge and understanding of Federal Aviation Regulations and manufacturer manuals Possess adequate tools FAA Inspection Authorization (preferred not required) Private pilot's license (preferred not required) Avionics troubleshooting experience with Garmin integrated avionics (preferred not required) Benefits ATP offers a comprehensive employee benefits program, including: 5K Sign On Bonus For Qualified AMTs Starting pay of $30/hr pay increases with years of experience Employer-Paid Life Insurance Medical coverage (Starting day one!) Dental/Vision/Life Insurance (Starting day one!) Critical Illness and Accident Insurance Short-Term and Long-Term Disability Insurance 401(k) Enrollment (100% Vested with no employer contributions) 8 Paid Holidays 13 Paid Time Off Days per Year (PTO is earned on an accrual-basis) increasing with tenure Physical Demands The physical demands described here must be met by an employee to successfully perform the essential functions of this job. The employee is regularly required to: talk, hear, see, stand; walk; have use hands and fingers, handle or feel; reach with hands and arms; lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. ATP is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #ATP123

Aircraft Mechanic Shift: Monday-Friday | 8:00 AM - 5:00 PM Join a Leader in General Aviation Fargo Jet Center is a full-service general aviation company based in North Dakota, internationally recognized for excellence in aviation services. Consistently ranked among the top aviation service providers in North America, we are looking for skilled and motivated Aircraft Mechanics to join our team and contribute to our continued success. What You'll Do: As an Aircraft Mechanic at Fargo Jet Center, you'll be responsible for performing both scheduled and unscheduled maintenance on a wide variety of general aviation aircraft, including but not limited to: Piper, Cessna, Pilatus, Hawker, Beechcraft, Gulfstream, Bombardier, and Cirrus. You'll play a key role in maintaining safety, quality, and performance standards while collaborating with a team that takes pride in precision and professionalism. What We're Looking For: Active FAA A&P License required Experience in General Aviation, Commercial, or Military aviation settings is welcome Preference given to candidates with hands-on experience on Cessna, Pilatus, Learjet, King Air, Cheyenne, Citation, and/or Cirrus airframes Responsibilities: Perform high-quality inspections including 100-hour, annual, and phase inspections Diagnoses, test, repair, and maintain aircraft airframes and systems Troubleshoot and perform complex structural fitting and installations Utilize technical data to ensure compliant and accurate maintenance Order parts and components as needed Complete documentation per FAA regulations and company policy Collaborate with the Maintenance Director and Leads; perform other duties as assigned What We Offer: Comprehensive health benefits (Medical, Dental, Vision) HSA and flexible spending programs Life and Accidental Death & Dismemberment insurance (100% Company Paid) Long-Term Disability insurance (100% Company Paid) 401(k) with employer match Paid time off and paid holidays Employee Assistance Program (EAP) and Wellness Program If you're ready to advance your aviation maintenance career with a trusted and dynamic team, apply today and help keep our fleet flying safely! Fargo Jet Center has a Drug Free Workplace Policy which includes applicants passing pre-employment testing. Applicants testing positive for the presence of prohibited drugs are ineligible for employment. FAA and DOT applicants who become employees of Fargo Jet Center will also be subject to random, reasonable cause, reasonable suspicion, and post-accident testing. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description Our client is a leader in aircraft solutions and has an exciting opportunity for an Aircraft Mechanic (A&P). Since 1936, they have been a world-class provider of comprehensive solutions for business aviation. Their vision of building lasting partnerships applies to their employees and customers. As an Aircraft Mechanic (A&P), you will be part of a team providing outstanding products and services. Salary Range: $28 - $40 depending on experience. Responsibilities: Conduct inspections, servicing, and repairs on various aircraft systems and components. Troubleshoot and function test across different airframe, engine, and component systems. Lead aircraft projects under the direction of the Crew Chief and Supervisor. Maintain accurate documentation for maintenance and modifications per FAA regulations and company procedures. Comply with safety regulations and uphold a clean work environment. Qualifications: Possess an Airframe & Powerplant Certificate. Ability to obtain and retain AOA badge or meet airport requirements. FAA Inspection Authorization (IA) preferred. Must receive designation as an Elliott Aviation Production Inspector. High school diploma or equivalent required. In-depth knowledge of relevant FARs. Minimum 8 years of aircraft maintenance experience, preferably with corporate jets. Benefits: Day 1 Benefits Package. - Competitive Compensation. - Health, Dental, and Vision Insurance. - RXnGo Pharmacy Benefit. - Paid Time Off. - Relocation Assistance. - 401(k) with Company Match. - Disability and Life Insurance. - Employee Assistance Program. - Ongoing Training and Education Opportunities. Apply today to become part of a dynamic, customer-focused organization that values expertise and commitment. Engage in challenging projects and enjoy a supportive work environment with excellent benefits and growth opportunities.

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic II (Hydraulic) Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. ADDITIONAL QUALIFICATIONS/EXPERIENCE REQUIREMENTS: Aircraft Mechanic II (Hydraulic): Electrical Experience: Minimum of two years total experience in related maintenance support with one year of hydraulics as a mechanic. The Contractor shall have the skill to remove and replace structural parts and accessories/components and the skill to make adjustments and settings according to established specifications and drawings. Experience in performing functions such as repairing hydraulic systems on Aircraft or Ground Support Equipment, fabricating, repairing, assembling, or installing systems that use pressurized fluids to operate. Hydraulic Knowledge: The Contractor shall have the ability to follow and accomplish tasks in accordance with existing published technical data. The Contractor shall have the ability to read and interpret engineering drawings and specifications required to accomplish maintenance tasks and modifications. Knowledge is mandatory of structural assembly and modification engineering drawings; concepts and application of maintenance directives; meaning of symbols used in structural and mechanical diagrams, blueprints; using and interpreting measuring devices; and proper handling, use, and disposal of hazardous waste and materials. Other: The Contractor shall have the skills necessary to assist in hydraulic system bleeds, and hydraulic operational checks. Normal color vision as defined in AFI 48-123, Medical Examinations and Standards is mandatory for this specialty. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: May occasionally perform duties as Team Lead Scheduled and unscheduled maintenance Maintenance Control planning and management Aircraft maintenance action documentation via logs, records, forms, and electronic means Support Equipment (SE) operation and inspections Aircraft inspections Troubleshooting General aircraft maintenance Technical Directive compliance and modifications Tool Control Program Tool issue/receipt supporting aircraft maintenance shops including hazardous materials, tool room/box/pouch configuration Maintain Aircraft, Engines, and SE Logbooks Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Requisition repair parts, materials, and consumable supplies through military supply system. Perform other tasks as directed. Preferred Qualifications: Eight or more years' experience in aircraft maintenance Advanced Corrosion Control Course Basic Qualifications: Two years' experience in related maintenance support with one year of hydraulics as a mechanic Must be able to work shift schedules as required per Performance Work Statement (PWS) Must be able work work-week schedules i.e. M-F, Sn-Th or as required per PWS Basic Corrosion Control Course. Must be able to work flexible work-week schedules as required Must be able to pass a background check Must be eligible for Common Access Card (CAC) Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must be able to travel to support off station Temporary Duty (TDY) as required Compensation $39.58/hour Other Compensation Employees will receive a minimum health and welfare fringe benefit of $2.65 for every hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees have a minimum of eleven paid holidays. After completing one year of service, employees will have two weeks paid vacation. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets