Aircraft mechanic jobs in Greenburgh, NY

**A&P Mechanic** The A&P Mechanic is responsible for troubleshooting, repairing, inspecting, and performing maintenance on customer aircraft. This role requires performing and documenting all work in accordance with appropriate manuals and regulations. + Located in Windsor Locks CT. + Pays up to $51/hr + $875/ addition weekly per diem dependent on years of corporate aircraft mechanic experience **Responsibilities** + Troubleshoot, repair, install, inspect, and perform maintenance on customer aircraft. + Document work performed per appropriate manuals and regulations. + Operate ground support equipment as required. + Perform mechanical and electrical removals and installations. + Assist with fueling and de-fueling of aircraft. + Assist with engine removal and installation. + Assist with aircraft component repair. **Essential Skills** + A&P License + Minimum 4-5 years of experience working on aircraft OR 1-2 years working on corporate jets. + Ability to interpret and work with mechanical engineering drawings. + Effective communication skills in both written and verbal form. + Ownership of a basic set of hand tools with inventory and control capability. + Ability to obtain appropriate Ground Support Equipment Qualifications as required. + Willingness to work unscheduled overtime, including non-scheduled workdays and holidays. + Capability to work in seasonal or inclement weather conditions. + Ability to obtain a Security Identification Display Area (SIDA) badge, if applicable. **Additional Skills & Qualifications** + Experience on corporate jet aircraft, military fixed-wing, or commercial aircraft is preferred. + Basic PC skills are preferred. **Why Work Here?** Join a dynamic and supportive environment that values growth and skill development. Benefit from a structured work schedule with opportunities for overtime, contributing to a balanced work-life experience. **Work Environment** The position operates on a second shift from Monday to Thursday, 3:30 PM to 2:00 AM, and a weekend shift from Friday to Sunday, working 36 hours over three 12-hour days. The role requires the ability to work in various weather conditions and maintain flexibility for unscheduled work hours. **Job Type & Location** This is a Contract to Hire position based out of Windsor Locks, Connecticut. **Job Type & Location** This is a Contract to Hire position based out of Windsor Locks, CT. **Pay and Benefits** The pay range for this position is $40.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Windsor Locks,CT. **Application Deadline** This position is anticipated to close on Dec 10, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job DescriptionDescription: Aircraft Technician - Join a Skilled, High-Energy Maintenance Team Long Island, NY | Ventura Air Services $45-$70/hr based on experience | Full-Time | On-Site If you're the type of A&P mechanic who can fix just about anything and thrives on variety, challenge, and quality workmanship-you're exactly who we're looking for. At Ventura Air Services, we've been maintaining and flying aircraft since 1955. We're not just a maintenance shop-we're a Part 135 charter operator and FAA-certified repair station, handling everything from heavy inspections to complex mods. If you're tired of turning the same wrench on the same aircraft every day, come work somewhere where every day is different. What You'll Be Working On: Routine maintenance and major repairs on a variety of business jets and turboprops Daily work includes aircraft from our Challenger 604 and Citation XL fleet, plus many others Diagnosing issues, troubleshooting systems, and executing efficient, quality repairs Collaborating with fellow techs, avionics specialists, and leadership to keep aircraft mission-ready Expanding your skillset through ongoing, hands-on experience Requirements: What We're Looking For: Valid A&P License (required) 5+ years of aircraft maintenance experience Experience with Challenger or Citation aircraft is preferred, but not required Comfortable working across airframes and systems Strong avionics knowledge is a plus Tech savvy - especially with Microsoft Office and Adobe Acrobat Must meet physical requirements of general aircraft maintenance Clean driving record and able to pass background check + drug testing Perks & Benefits: $45-$70/hour starting, based on experience Medical, dental, and vision coverage 401(k) with company match Ongoing training & employee development programs A team that values skill, hustle, and initiative If you're ready to put your experience to work in a fast-paced, high-performance environment where no two days are the same-Ventura is the place to be.

Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Aircraft Mechanic assigned to a foreign field site is responsible to the Off-Site Supervisor for performing duties as assigned. Frequently exercises independent judgment and possesses abilities sufficient to supervise a crew of aircraft mechanics. Work is performed under minimum supervision, and the employee consults with the supervisor only for the initial job assignment and where departures from standard practices are involved. ESSENTIAL DUTIES AND FUNCTIONS The essential functions include but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal elements. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all-inclusive; they are examples only and may be amended or added to as needed by the organization. Maintains Beech King Air B300 aircraft in support of aircrew missions. Launches and recovers aircraft, and performs required inspections to ensure airframe structure and powerplant serviceability. Adjusts, aligns, and calibrates aircraft components. Performs functional checks of fuel, hydraulics, engines, avionics, and electro-environmental systems. Advises management of deficiencies affecting aircraft airworthiness. Maintains aircraft support equipment inventory. Performs inspections, and accomplishes refurbishment and phase maintenance. Prepares and maintains aircraft maintenance records and historical documents. Monitors/reviews deficiency reports for adverse trends. Uses applicable OEM manuals when performing aircraft maintenance and troubleshooting aircraft. Performs in-progress and follow-up inspections to ensure quality of work. Researches, orders, and receives aircraft parts. Prepares parts for turn-in to the supply system. Initiates material reports as required. Maintains hand tools and special tools in safe and serviceable condition. Adhere to company tool accountability procedures. Reports unserviceable tools and equipment to appropriate parties. Annotates equipment/tools inspection and condition documents. Checks serviceability, and maintains and operates powered and non-powered support equipment. Complies with established policies, procedures, and standards. Complies with all safety, bioenvironmental, security, and housekeeping standards. Operates special purpose and regular vehicles as required. Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. Assists in researching and requisitioning aircraft parts and components and determining the reparability and serviceability of these assets. Monitors bench stock items and assists with and/or performs inventory inspections. Maintains supply discipline in the work center at all times. Actively participates in the Safety Program. Ensures HAZMAT processes are followed. Performs aircraft movements and FOD prevention walks on the flight line. Completes maintenance documentation using required forms. Services aircraft with fuel, oil, grease, hydraulic fluid, air, oxygen, and nitrogen. Performs aircraft corrosion control procedures including washing, wiping down, polishing, and vacuuming. Performs aircraft, basic post-flight, and periodic/phase inspections. Operate and maintain GSE, flight line vehicles, and other support equipment as required. Discusses discrepancies with aircrews to obtain adequate troubleshooting information and data. Performs other job-related duties as assigned. Maintain strict compliance with company and government Communications Security (COMSEC) policies and procedures. EDUCATION and/or EXPERIENCE: High School diploma or GED equivalent required; two-year technical trade school, military experience, or equivalent on-the-job training is required Must hold a valid Airframe & Powerplant certificate issued by the Federal Aviation Administration (FAA) Must have a minimum of three years of hands-on experience as an A&P mechanic on small to medium fixed-wing and light & medium helicopters. Experience shall be in a similar position within the last twelve (12) months. Knowledge, SKILLS, ABILITIES AND OTHER CHARACTERISTICS: The following are required: Demonstrated experience in maintenance support for various fixed-wing and rotor-wing aircraft (e.g., Cessna 206 & 208, Beechcraft King Air 300 series airplanes and Bell 407/412 helicopters) Demonstrated experience in maintenance support for medium cargo/commuter type aircraft (e.g., ATR 42, ATR 72 or Dash 8) Have tools required to complete a variety of maintenance tasks on aircraft listed in above paragraphs Knowledge of hand tools, power tools, machines, and equipment such as shears, sheet metal brake Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Install and operate rotor and propeller balancing equipment. (e.g. RADS, MicroVib, & Zing) Ability to retain information and make decisions according to standard policies and procedures Ability to determine work methods to accomplish assignments Working knowledge of applicable FAA Federal Aviation Regulations Ability to make proper entries in aircraft logs and records Obtain a DOJ Security Clearance as required Have and maintain a valid driver's license Must be a U.S. citizen PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee works in an aircraft hangar the majority of the shift and is required to stand; walk, stoop, kneel, crouch, or crawl. The employee is frequently required to reach with hands and arms as well as push and pull items. The employee must able to lift and/or move up to 50 pounds regularly. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Normal day to day working conditions are inside an aircraft hangar with good ventilation and airflow. Work may be regularly required in outside weather conditions where the employee will be exposed to all types of environmental conditions and extremes such as hot, cold, rain, wind, etc. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, and risk of electrical shock. The employee is required to wear personal protective equipment including eye protection, ear protection, hand protection, respirators, masks, aprons, leather safety shoes, steel toe shoes, fall protection harness, and other equipment anytime the potential for hazards exist. The employee is occasionally exposed to high precarious places, confined spaces, toxic or caustic chemicals; risk of radiation; and vibration. The noise level in the work environment is usually moderate. Benefits include the following: Healthcare coverage Retirement plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays. Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Aircraft Mechanic assigned to a foreign field site is responsible to the Off-Site Supervisor for performing duties as assigned. Frequently exercises independent judgment and possesses abilities sufficient to supervise a crew of aircraft mechanics. Work is performed under minimum supervision, and the employee consults with the supervisor only for the initial job assignment and where departures from standard practices are involved. **ESSENTIAL DUTIES AND FUNCTIONS** The essential functions include but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal elements. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all-inclusive; they are examples only and may be amended or added to as needed by the organization. + Maintains Beech King Air B300 aircraft in support of aircrew missions. + Launches and recovers aircraft, and performs required inspections to ensure airframe structure and powerplant serviceability. + Adjusts, aligns, and calibrates aircraft components. Performs functional checks of fuel, hydraulics, engines, avionics, and electro-environmental systems. + Advises management of deficiencies affecting aircraft airworthiness. + Maintains aircraft support equipment inventory. + Performs inspections, and accomplishes refurbishment and phase maintenance. + Prepares and maintains aircraft maintenance records and historical documents. + Monitors/reviews deficiency reports for adverse trends. + Uses applicable OEM manuals when performing aircraft maintenance and troubleshooting aircraft. + Performs in-progress and follow-up inspections to ensure quality of work. + Researches, orders, and receives aircraft parts. + Prepares parts for turn-in to the supply system. Initiates material reports as required. + Maintains hand tools and special tools in safe and serviceable condition. + Adhere to company tool accountability procedures. + Reports unserviceable tools and equipment to appropriate parties. + Annotates equipment/tools inspection and condition documents. + Checks serviceability, and maintains and operates powered and non-powered support equipment. + Complies with established policies, procedures, and standards. + Complies with all safety, bioenvironmental, security, and housekeeping standards. + Operates special purpose and regular vehicles as required. + Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. + Assists in researching and requisitioning aircraft parts and components and determining the reparability and serviceability of these assets. + Monitors bench stock items and assists with and/or performs inventory inspections. + Maintains supply discipline in the work center at all times. + Actively participates in the Safety Program. + Ensures HAZMAT processes are followed. + Performs aircraft movements and FOD prevention walks on the flight line. + Completes maintenance documentation using required forms. + Services aircraft with fuel, oil, grease, hydraulic fluid, air, oxygen, and nitrogen. + Performs aircraft corrosion control procedures including washing, wiping down, polishing, and vacuuming. + Performs aircraft, basic post-flight, and periodic/phase inspections. + Operate and maintain GSE, flight line vehicles, and other support equipment as required. + Discusses discrepancies with aircrews to obtain adequate troubleshooting information and data. + Performs other job-related duties as assigned. + **Maintain strict compliance with company and government Communications Security (COMSEC) policies and procedures.** **EDUCATION and/or EXPERIENCE:** + High School diploma or GED equivalent required; two-year technical trade school, military experience, or equivalent on-the-job training is required + Must hold a valid Airframe & Powerplant certificate issued by the Federal Aviation Administration (FAA) + Must have a minimum of three years of hands-on experience as an A&P mechanic on small to medium fixed-wing and light & medium helicopters. + Experience shall be in a similar position within the last twelve (12) months. **Knowledge, SKILLS, ABILITIES AND OTHER CHARACTERISTICS:** The following are required: + Demonstrated experience in maintenance support for various fixed-wing and rotor-wing aircraft (e.g., Cessna 206 & 208, Beechcraft King Air 300 series airplanes and Bell 407/412 helicopters) + Demonstrated experience in maintenance support for medium cargo/commuter type aircraft (e.g., ATR 42, ATR 72 or Dash 8) + Have tools required to complete a variety of maintenance tasks on aircraft listed in above paragraphs + Knowledge of hand tools, power tools, machines, and equipment such as shears, sheet metal brake + Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals + Install and operate rotor and propeller balancing equipment. (e.g. RADS, MicroVib, & Zing) + Ability to retain information and make decisions according to standard policies and procedures + Ability to determine work methods to accomplish assignments + Working knowledge of applicable FAA Federal Aviation Regulations + Ability to make proper entries in aircraft logs and records + Obtain a DOJ Security Clearance as required + Have and maintain a valid driver's license + Must be a U.S. citizen **PHYSICAL DEMANDS:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee works in an aircraft hangar the majority of the shift and is required to stand; walk, stoop, kneel, crouch, or crawl. The employee is frequently required to reach with hands and arms as well as push and pull items. The employee must able to lift and/or move up to 50 pounds regularly. **WORK ENVIRONMENT:** The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Normal day to day working conditions are inside an aircraft hangar with good ventilation and airflow. Work may be regularly required in outside weather conditions where the employee will be exposed to all types of environmental conditions and extremes such as hot, cold, rain, wind, etc. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, and risk of electrical shock. The employee is required to wear personal protective equipment including eye protection, ear protection, hand protection, respirators, masks, aprons, leather safety shoes, steel toe shoes, fall protection harness, and other equipment anytime the potential for hazards exist. The employee is occasionally exposed to high precarious places, confined spaces, toxic or caustic chemicals; risk of radiation; and vibration. The noise level in the work environment is usually moderate. **Benefits include the following:** + Healthcare coverage + Retirement plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays. + Learning and Development resources + Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Aircraft Mechanic assigned to a foreign field site is responsible to the Off-Site Supervisor for performing duties as assigned. Frequently exercises independent judgment and possesses abilities sufficient to supervise a crew of aircraft mechanics. Work is performed under minimum supervision, and the employee consults with the supervisor only for the initial job assignment and where departures from standard practices are involved. ESSENTIAL DUTIES AND FUNCTIONS The essential functions include but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal elements. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all-inclusive; they are examples only and may be amended or added to as needed by the organization. * Maintains Beech King Air B300 aircraft in support of aircrew missions. * Launches and recovers aircraft, and performs required inspections to ensure airframe structure and powerplant serviceability. * Adjusts, aligns, and calibrates aircraft components. Performs functional checks of fuel, hydraulics, engines, avionics, and electro-environmental systems. * Advises management of deficiencies affecting aircraft airworthiness. * Maintains aircraft support equipment inventory. * Performs inspections, and accomplishes refurbishment and phase maintenance. * Prepares and maintains aircraft maintenance records and historical documents. * Monitors/reviews deficiency reports for adverse trends. * Uses applicable OEM manuals when performing aircraft maintenance and troubleshooting aircraft. * Performs in-progress and follow-up inspections to ensure quality of work. * Researches, orders, and receives aircraft parts. * Prepares parts for turn-in to the supply system. Initiates material reports as required. * Maintains hand tools and special tools in safe and serviceable condition. * Adhere to company tool accountability procedures. * Reports unserviceable tools and equipment to appropriate parties. * Annotates equipment/tools inspection and condition documents. * Checks serviceability, and maintains and operates powered and non-powered support equipment. * Complies with established policies, procedures, and standards. * Complies with all safety, bioenvironmental, security, and housekeeping standards. * Operates special purpose and regular vehicles as required. * Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. * Assists in researching and requisitioning aircraft parts and components and determining the reparability and serviceability of these assets. * Monitors bench stock items and assists with and/or performs inventory inspections. * Maintains supply discipline in the work center at all times. * Actively participates in the Safety Program. * Ensures HAZMAT processes are followed. * Performs aircraft movements and FOD prevention walks on the flight line. * Completes maintenance documentation using required forms. * Services aircraft with fuel, oil, grease, hydraulic fluid, air, oxygen, and nitrogen. * Performs aircraft corrosion control procedures including washing, wiping down, polishing, and vacuuming. * Performs aircraft, basic post-flight, and periodic/phase inspections. * Operate and maintain GSE, flight line vehicles, and other support equipment as required. * Discusses discrepancies with aircrews to obtain adequate troubleshooting information and data. * Performs other job-related duties as assigned. * Maintain strict compliance with company and government Communications Security (COMSEC) policies and procedures. EDUCATION and/or EXPERIENCE: * High School diploma or GED equivalent required; two-year technical trade school, military experience, or equivalent on-the-job training is required * Must hold a valid Airframe & Powerplant certificate issued by the Federal Aviation Administration (FAA) * Must have a minimum of three years of hands-on experience as an A&P mechanic on small to medium fixed-wing and light & medium helicopters. * Experience shall be in a similar position within the last twelve (12) months. Knowledge, SKILLS, ABILITIES AND OTHER CHARACTERISTICS: The following are required: * Demonstrated experience in maintenance support for various fixed-wing and rotor-wing aircraft (e.g., Cessna 206 & 208, Beechcraft King Air 300 series airplanes and Bell 407/412 helicopters) * Demonstrated experience in maintenance support for medium cargo/commuter type aircraft (e.g., ATR 42, ATR 72 or Dash 8) * Have tools required to complete a variety of maintenance tasks on aircraft listed in above paragraphs * Knowledge of hand tools, power tools, machines, and equipment such as shears, sheet metal brake * Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals * Install and operate rotor and propeller balancing equipment. (e.g. RADS, MicroVib, & Zing) * Ability to retain information and make decisions according to standard policies and procedures * Ability to determine work methods to accomplish assignments * Working knowledge of applicable FAA Federal Aviation Regulations * Ability to make proper entries in aircraft logs and records * Obtain a DOJ Security Clearance as required * Have and maintain a valid driver's license * Must be a U.S. citizen PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee works in an aircraft hangar the majority of the shift and is required to stand; walk, stoop, kneel, crouch, or crawl. The employee is frequently required to reach with hands and arms as well as push and pull items. The employee must able to lift and/or move up to 50 pounds regularly. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Normal day to day working conditions are inside an aircraft hangar with good ventilation and airflow. Work may be regularly required in outside weather conditions where the employee will be exposed to all types of environmental conditions and extremes such as hot, cold, rain, wind, etc. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, and risk of electrical shock. The employee is required to wear personal protective equipment including eye protection, ear protection, hand protection, respirators, masks, aprons, leather safety shoes, steel toe shoes, fall protection harness, and other equipment anytime the potential for hazards exist. The employee is occasionally exposed to high precarious places, confined spaces, toxic or caustic chemicals; risk of radiation; and vibration. The noise level in the work environment is usually moderate. Benefits include the following: * Healthcare coverage * Retirement plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays. * Learning and Development resources * Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

PL Developments, also known as PLD, is a leading manufacturer, packager, and distributor of over-the-counter (OTC) pharmaceutical products and consumer healthcare goods The Lead Mechanic oversees daily mechanical operations within blister and carton packaging, managing personnel and ensuring all equipment meets cGMP, SOP, OSHA, FDA, and safety standards. This role is responsible for equipment set-ups, repairs, preventive maintenance, troubleshooting, and continuous improvement of production efficiency. Additional responsibilities include training mechanical staff, supporting installation of new vision systems, and performing technical fabrication and repairs. Strong technical expertise, problem-solving skills, and the ability to collaborate across Planning and Quality teams are essential. Work Schedule: Monday-Thursday 7:00am-5:30pm (Overtime on Fridays as needed) JOB QUALIFICATIONS: Bachelor's degree in Mechanical Engineering or related field or 5 years managerial experience in the associated field Knowledge of OSHA, cGMP and FDA guidelines Ability to recognize hazards and take appropriate corrective actions Knowledge of equipment operations and maintenance practices Knowledge of Standard Operating Procedures for equipment operations including safety rules and regulations Expertise in the operation and maintenance of food and/or pharmaceutical equipment Ability to troubleshoot problems with facilities and production equipment. Experience analyzing and troubleshooting problems with equipment, identifying solutions, recommending and implementing methods, procedures and/or techniques for resolution Ability to read and interpret blueprints and schematics Ability to establish and maintain cooperative working relationships Ability to work independently as well as in a team environment POSITION RESPONSIBILITIES: Accountable for the day to day management of blister/carton personnel Responsible for machine related aspects such as packaging projects, equipment maintenance, parts and service Review daily mechanical activities to assure compliance with company cGMP's, and SOP's Oversee daily set-up, repair, and preventive maintenance of packaging equipment in both bottle and blister operation Ensure that each member of the mechanical team is properly trained along with documentation indicating training information Continuous Improvement of Units Per Minute through consistent machine set-ups, proper mechanical maintenance, and personnel training New Packaging Line Design Prepare timelines, line layouts, and review of electrical schematics for new machine installation IQ/OQ review and approval Oversee outside service requirements and contracts negotiations for compressors, plc's, etc Perform installation and set-up of new visions systems as required Knowledge of welding, machine fabrication, and technical repairs Participate in weekly meetings with Planning and Quality PHYISICAL REQUIREMENTS: This position requires regular physical activity, including frequent walking, climbing, bending, kneeling, lifting, stooping, and reaching/working overhead. Candidates must be able to lift, pull, or push up to 75 pounds on a regular basis, safely use ladders up to 30 feet and work at elevated heights and climb ladders with a 300-pound weight limit while carrying a tool bag weighing approximately 20 pounds. The role involves standing and moving for extended periods in a fast-paced production environment and may require working in various temperatures or conditions. Incumbents may be exposed to hazardous materials, gases, electrical components, and equipment. Safety protocols and protective gear are provided. Hourly Range: $40.00-$50.00/hr based on experience. BENEFITS: PLD is a proud employer offering many corporate benefits, including: ⠁ Medical and Dental Benefits ⠁ Vision ⠁ 401K with employer match ⠁ Group Life Insurance ⠁ Flex Spending Accounts ⠁ Paid Time Off and Paid Holidays ⠁ Tuition Assistance ⠁ Corporate Discount Program ⠁ Opportunities to Flourish Within the Company PL Developments is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. #HP1

Northeast Aero is seeking skilled and motivated technicians with a hunger for knowledge and a passion for aviation repair to join our team. We currently have open positions in Pneumatic, Rotating, Fuel, Electro/ Mechanical and Hydraulics. Our ideal candidate is a team player and has a passion for working with their hands, utilizing various tools, materials and specialized testing equipment to test and repair aircraft components in accordance with OEM and/or customer specifications. The technician's responsibilities will be testing, troubleshooting, tearing down and building aircraft components. All positions require knowledge of our procedures as it pertains to processes and documentation. On the job training and oversight is provided by NEACO management. Essential Responsibilities Commitment to company values and ethics Test and repair aircraft components in accordance with company provided data (manuals, drawings, procedures, etc.) and company provided training. Maintain a clean, clutter-free work area. Correctly, concisely, and legibly fill out all company forms and reports as required by management (both written and online). Work with co-workers to achieve goals and objectives set by management. Work with management to develop new processes and procedures as necessary. Assist in basic shop upkeep and maintenance including routine cleaning of the technician's work area and periodic shop maintenance assignments. Communicate clearly and effectively with internal and external representatives, including management, customer reps, FAA inspectors, airline inspectors and similar (training provided). Experience and Skills The ability to pass a pre-employment and random drug and alcohol screenings as well as a basic background check. 2+ of similar or related work experience; similar experience in aviation, automotive, marine, electronics, or low-voltage electric repair will be considered. Technician candidate must own his or her own set of basic hand tools. Applicant must have at the least a moderate level of experience and proficiency with general electrical soldering and/or circuit board level soldering. The ability to follow instructions and work to a written procedure concisely and accurately. Must be fluent in speaking, reading, and writing English. Applicants must be able to read and thoroughly understand technical drawings, blueprints, manuals, and instructions. A pre-employment technical skills and comprehension test may be required. Interested individuals must be detail-oriented, self-motivated, and highly organized. Experience using a computer. Punctual and reliable. Valid driver's license. Electrical or Mechanical aptitude and hands-on experience. Machinist experience a plus. Physical Requirements The ability to lift up to 50 lbs. The ability to walk up stairs Manual dexterity (must be able to hold certain components with one hand while moving tools around with the other) Constant hand manipulation of small to medium components Sitting or standing for long periods of time Frequent use of hand tools and other repair equipment Use of chemicals for cleaning, lubricating and painting Education High school diploma or GED is required. Associates degree or higher in a related technical field preferred. Trade schooling or related industry experience required. A&P license/certificate is not required (but it is a plus). This position is considered safety sensitive and will be part of FAA DOT Drug Abatement Program so must be able to pass pre-employment and random drug or alcohol testing. Compensation Hourly position commensurate with experience level and skill level and/or certifications. ($24 - $32) We offer medical, dental, vision, life and other insurance options; 401k with 100% match on first 4%; full time workers get paid holidays, vacation & sick/personal leave accrued on hire date. About Us Northeast Aero Compressor is an equal opportunity employer. For more information go to our website at **************

** **The starting salary for this position is $53\.09 per hour and progresses in accordance with the union contract\. Check out the career site for an overview of benefits\.** **\*Effective 6/1/25 the starting salary will be $54\.68 per hour\.** **POSITION DESCRIPTION:** The individual will perform work involved in the construction, operation, and maintenance of the electric system\. A Fully Qualified Line Mechanic position requires at least one year of experience\. A line mechanic is responsible for the installation, repair and maintenance of overhead and underground electrical power lines and auxiliary equipment\. This includes working aloft on electric utility poles or on ground and pad mounted structures\. Must have the ability to climb poles skillfully with Lineman's climbers; and the ability to direct the work of others when assigned are required\. The selected candidate must be qualified to hold and possess a Commercial Driver's License \(CDL\)\. Rubber gloving of high voltage distribution systems up to 23KV is a requirement\. The individual will be required, during periods of trouble call assignment, to be available at the reporting base within approximately one\-half hour\. **JOB QUALIFICATIONS:** + **High school diploma or equivalent \(GED\)\.** + **It is preferred that individuals hold a valid Commercial driver's license \(CDL\) and clean driving record\.** + **Must be physically able to perform the "essential duties" of the Line Mechanic position, as described above\.** + **Must be able to effectively interact, communicate, and direct the work of other co\-workers\.** + **Must be available to perform overtime and emergency work as required and live within one hour of the reporting location** Candidates must successfully pass the written assessment and the overhead physical agility assessment\. **This is a union represented position so anyone going into this position would be required to become a member of the union\.** **Bargaining unit employees under the TEAL contract will be given first consideration\.** Qualified candidates must submit a resume with their application\. \#elecajd **Worker Type:** Regular **Number of Openings** 0 **EEO Statement** Eversource Energy is an Equal Opportunity and Affirmative Action Employer\. All qualified applicants will receive consideration for employment without regard to age, race, color, sex, sexual orientation, gender identity, national origin, religion, disability status, or protected veteran status\. VEVRRA Federal Contractor **Emergency Response:** Responding to emergency situations to meet customers' needs is part of every employee's role\. If employed, you will be given an Emergency Restoration assignment\. This means you may be called to assist during an emergency outside of your normal responsibilities, work hours and location\.

Join Our Team at Wheels Up At Wheels Up, we're proud to be a global leader in on-demand private aviation. As one of the largest companies in the industry and a strategic partner of Delta Air Lines - we are committed to making private air travel safe, reliable, and enjoyable. With a diverse fleet of owned aircraft plus a global network of trusted charter operators, we offer our customers access to the right aircraft for their needs and the ability to fly on their terms. And it doesn't stop at private flights. Wheels Up also provides freight services, safety and security solutions, and managed services to individuals, businesses, government agencies, and more. Regardless of how, when or where you want to fly, our mission is simple; deliver a premium, personalized aviation experience for every customer. Wheels Up is looking for a world-class Mobile Support Unit Technician to join our team of dedicated and passionate professionals, fueled by the most powerful brand in private aviation, as we continue our mission of democratizing the private aviation space through cutting-edge technology and innovative product and service offerings. Responsibilities Role Overview: What You'll Be Doing The MSU Aircraft Technician (Teterboro, NJ) will perform a variety of aircraft modifications and maintenance functions on AOG aircraft on road trips. Duties include advanced troubleshooting, removal and installations of airframe components, landing gear, engine components, electrical components, control systems and any other maintenance requirements required to return aircraft to service. Your Key Responsibilities (Essential Functions) * Must be able to communicate effectively with scheduling, flight crews, Technical Support, vendors, and leadership. * Perform maintenance and servicing of all aircraft mechanical and avionics systems. * Must demonstrate the ability to work independently to perform assigned maintenance and avionics tasks. * Responsible to coordinate/order, receive and inspect all tooling and materials needed to service the aircraft, prior to use/installation. * Responsible for inspecting the MSU truck, tools for calibration/operation, stocking levels and hazmat. * Arranges the shipment of all core units and tooling back to the proper location. * Properly completes work order signoffs, logbook entries, shift turnovers, expense reports and all other paperwork in a timely manner. * Ensures that all work accomplished meets quality standards, maintenance manual and company policies. * Establishes and maintains a professional working relationship and promotes the Wheels Up brand positively when interacting with others. * Properly identifies (tags) parts and equipment. Stores aircraft components and other property securely and safely. * Operates and supervises use of special support equipment used in removal and installations of major components. * Coordinates with Line Service and FBO ops to schedule movement of aircraft and assist with movement of aircraft. * Provides regular updates on aircraft status and all support activity to MCC and leadership, as needed. * Reliable, self-motivated, and able to deal with stressful situations and timelines while maintaining a professional attitude. * Assists in training new/junior employees. * Responsible for maintaining company training requirements. Qualifications What You Bring to the Table: Education & Certification Requirements We're looking for someone who has a unique mix of experience, skills, and passion for what we do: * Valid FAA Airframe and Powerplant license required. * Valid Driver's License required * 4+ years combined experience in inspection, maintenance or servicing of corporate type aircraft * 2+ years Citation XL, Citation X, Beechcraft King Air, Hawker Beechcraft 400XP, Phenom 300, or Challenger 350 aircraft experience * Advanced knowledge of inspection and maintenance procedures for the noted aircraft models and systems. The Extras We Value (Preferred Requirements) While not mandatory, here are some additional things that would make you stand out: * FCC license, preferred. * Formal training (Flight Safety Maintenance initial) in the Beechcraft King Air, Citation XL, Citation X, or Hawker Beechcraft 400XP, Phenom 300, or Challenger 350 preferred. What We Offer Salary Range & Benefits At Wheels Up, we believe in fair compensation based on experience, skills, and qualifications. The compensation for this role ranges from $58.00/Hr. to $58.00/Hr., depending on a variety of factors. We don't typically start individuals at the top of the salary range; your place within the range is based on what you bring to the table. Additionally, you may be eligible for a discretionary annual incentive program, which rewards individual and organizational performance. We also offer a range of benefits designed to support your well-being and personal life, including: * Tuition Reimbursement * Competitive 401(k) * Comprehensive Medical, Dental, and Vision Insurance * Complimentary access to mental health and wellness counseling through Spring Health * Financial planning assistance * A variety of additional programs and services in support of your total well-being Everyone is welcome here Each of us is unique, and that's what makes us amazing. We believe there's power in bringing people with different backgrounds, points of view and life experiences together. So, bring yourself and your best ideas. Wheels Up is committed to a policy of equal employment opportunity for applicants and employees. It is our policy to apply recruiting, hiring, training, promotion, compensation and professional development practices and make all other employment decisions without regard to actual or perceived race, color, religion, sex, national origin, age, disability, pregnancy status, genetic information, or any other characteristic protected by federal, state or local laws, regulations or ordinances. Because when we feel safe and comfortable being ourselves, there's no limit to what we can achieve. Need Accommodations? If you have a disability or are a disabled veteran and need assistance with applying, please reach out to us at ***************. Simply include "Accommodation Request" in the subject line so we can quickly address your needs. We look forward to learning more about you and how you can contribute to the Wheels Up journey!

Power-Flo Technologies is seeking a motivated individual to join our team as an HVAC Controls Mechanic. We are a two location temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. We are looking for someone to work independently in the field to startup, service, and support these systems in coordination with our in-house engineering team. What Will Make You Successful in This Role? * Experience and certification with programming either Johnson FX controllers (CCT) (preferred), Honeywell Spyder, and/or Niagara AX/N4 (any brand). * Experience with ACAD, or similar CAD software. * Knowledge of industry-standard communication protocols such as BACnet MSTP, BACnet IP, Niagara, JCI N2, Modbus, Lon, Etc. * Niagara N4 certification. * Ability to read and interpret blueprints, specifications, and program /design to meet sequence of operations of both design/build projects as well as plan/spec projects. Additional Necessary Qualifications * 3 years of building automation experience required. * Strong understanding of commercial HVAC systems operations. * Ability to read mechanical prints and schematics. * Ability to work independently and in a team setting. * Basic knowledge regarding use of a PC (Microsoft Word, Excel, Outlook). * Competent with the use of electrical test equipment, i.e., Multi meter, shop tools, hand tools, pneumatic tools. * Mechanical aptitude required. * The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams. * Valid and clean NYS Driver's License to operate company vehicles. * OSHA 30 and site safety training. Physical Requirements * Ability to Stand for 8 Hours * Ability to lift 50 pounds * Ability to work on elevated platforms * Ability to climb ladders * This position may require standing, stooping, bending, kneeling, crouching and/or reaching Salary Range: $60,000 - $100,000/year Benefits * Health Insurance (medical, dental, vision) * PTO Program and Paid Holidays * 401K * EAP We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

West Star is the fastest growing maintenance repair organization in the industry and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. What you can expect as an Interior Technician at West Star: As an Interior technician you will be working on some of the most sophisticated private aircraft in the world. Duties can include removal and installation of carpeting, insulation, sound proofing and fabric accessories; varying amounts of parts replacement/repair, basic electrical system installation, modifications, refurbishments and general mechanical applications on aircraft interiors. Job duties will vary by type and scope, as designated by the Interior Team Leader. You will be ESSENTIAL to many FUNCTIONS including: Performing general mechanical items on aircraft interiors and related systems. Performing minor modifications on panels, seats, carpets, cabinetry, upholstery, etc Assists in aircraft detailing and cleaning Maintenance and repair of shop facility, equipment and tooling Basic computer skills to be able to navigate electronic training, manuals, and maintenance data bases Cleanliness of shop and surroundings Work independently when required Effectively and clearly communicate (i.e., speak, write, read) in English Any other job-related duties as assigned by supervisor or management. What you'll need to bring with you: Your Education: A High school diploma or equivalent. A valid driver's license approved for airline travel and/or a valid passport is ideal, but not required Your Experience : 5 + years' experience working on private aviation interiors. Your Initiative: We're looking for team players who are self-motivated and able to perform in a fast paced environment where working under specific deadlines and time constraints will be common. Your Sense of Responsibility: Attend work every day as scheduled to include overtime and weekend assignments. Notify supervisor in advance of shift starting if unable to work. Must have reliable transportation to get to work each and every day. Perform all work in accordance with Federal Aviation Administration guidelines. Follow all company and safety rules during performance of duties. Maintain customer oriented work habits. Assist in major modification work as needed

Job Description Job Posting - Seasonal De-Icing Technician - LGA - Queens, NY Job Type: Seasonal - Full-time and Part-time Shifts (depending on weather) Application Deadline: December 31, 2025 Join the Front Line of Winter Safety in Aviation Aeromag is a leader in aircraft de-icing operations across North America and Europe. As a Seasonal De-Icing Technician, you'll play a crucial role in ensuring the safety and on-time departure of aircraft during winter conditions. Whether you're looking to gain experience in the aviation industry, return for another season, or earn extra income during the winter months, this is a flexible and impactful opportunity. Our technicians choose their shifts based on availability, making this role ideal for students, retirees, or anyone with a variable schedule. Key Responsibilities Safely operate de-icing trucks and equipment near aircraft under winter conditions Apply aircraft anti-icing/de-icing fluids in accordance with procedures and safety protocols Communicate with ground crew, flight crew, and dispatchers Follow airport regulations, security procedures, and safety guidelines Complete required logs and reports after each operation What You Bring Must be available for shift work, including nights, weekends, and holidays Comfortable working outdoors in extreme weather conditions Valid driver's license required (airside license preferred or must be obtained upon hiring) Able to pass security clearance for airport operations (RAIC, SIDA, or equivalent) Prior experience in aviation, heavy equipment, or seasonal work is an asset Why Join Aeromag Competitive hourly wage ($22.50) Paid training and certification provided Flexible scheduling - choose your shifts based on your availability Ideal for those seeking extra income during the winter season Opportunities to return seasonally or grow into year-round roles Be part of a team that makes a direct impact on air travel safety Apply Today Only selected candidates will be contacted for interviews. Aeromag is an equal opportunity employer and values diversity in its workforce.

Atlantic Coast Recycling is looking to add a Plant Mechanic to the team in Passaic, NJ. Pay for this role will be $31-36/hr depending on relevant experience As a mechanic with us the minimum responsibilities are: * Perform repairs and inspections, safety checks, diagnosis and repair of electrical, hydraulics on plant equipment * Utilize computer electrical systems to interpret failure modes to identify and adjust plant machinery * Respond to emergency repairs * Reviewing and/or Completing or repairs * Completing required paperwork utilizing maintenance software programs. * Testing machine after services and repairs * Helping other team members with repairs as needed * Having professional and courteous interactions with all team members * Maintains a clean, safe work area in compliance with corporate and OSHA standards. * Perform other miscellaneous job-related duties as assigned. What we need from you: * Troubleshoot and perform electrical and mechanical repairs as needed on the plant equipment * Ensure operation of the mechanical equipment and machinery by performing preventative maintenance * Perform daily inspection of all equipment to minimize unforeseen breakdowns * Install wear parts on conveyors, screens, optical sorters, * Adjusts work priorities as necessary to meet production needs. * Ability to multi-task and work under limited supervision * Ability to perform physical requirements such as bending, reaching, stretching, and lifting * Must be able to work in a noisy environment * Basic mechanic tools required * Must comply with plant safety practices Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status. #ACMaintenance

Job Description Job Posting - Seasonal De-Icing Technician - SYR - Syracuse, NY Job Type: Seasonal - Full-time and Part-time Shifts (depending on weather) Application Deadline: December 31, 2025 Join the Front Line of Winter Safety in Aviation Aeromag is a leader in aircraft de-icing operations across North America and Europe. As a Seasonal De-Icing Technician, you'll play a crucial role in ensuring the safety and on-time departure of aircraft during winter conditions. Whether you're looking to gain experience in the aviation industry, return for another season, or earn extra income during the winter months, this is a flexible and impactful opportunity. Our technicians choose their shifts based on availability, making this role ideal for students, retirees, or anyone with a variable schedule. Key Responsibilities Safely operate de-icing trucks and equipment near aircraft under winter conditions Apply aircraft anti-icing/de-icing fluids in accordance with procedures and safety protocols Communicate with ground crew, flight crew, and dispatchers Follow airport regulations, security procedures, and safety guidelines Complete required logs and reports after each operation What You Bring Must be available for shift work, including nights, weekends, and holidays Comfortable working outdoors in extreme weather conditions Valid driver's license required (airside license preferred or must be obtained upon hiring) Able to pass security clearance for airport operations (RAIC, SIDA, or equivalent) Prior experience in aviation, heavy equipment, or seasonal work is an asset Why Join Aeromag Competitive hourly wage ($19) Paid training and certification provided Flexible scheduling - choose your shifts based on your availability Ideal for those seeking extra income during the winter season Opportunities to return seasonally or grow into year-round roles Be part of a team that makes a direct impact on air travel safety Apply Today Only selected candidates will be contacted for interviews. Aeromag is an equal opportunity employer and values diversity in its workforce.

Please call/text Kelly Milowe at ************** to discuss opportunity in further detail and/or send resume to ****************** HSGI, Inc. has IMMEDIATE Airframe & Powerplant Mechanic positions available! The Aircraft Maintenance Technician reports directly to the Crew Chief for task assignments and is responsible for the timely and efficient completion of all assigned duties. The A&P Mechanic carries out tasks in accordance with work scope requirements, adhering to established quality standards and utilizing the appropriate technical documentation. Responsibilities include, but are not limited to, maintenance and inspection, servicing and lubrication, troubleshooting, repairs and modifications, as well as fueling and de-fueling operations. Experience on Dassault Falcon Jet, Gulfstream, Citation, Bombardier, Lear Jet, Challenger, Global Express, Hawker Beechcraft, Embraer, etc., would be a plus and an immediate hire! For immediate consideration, call/text Kelly Milowe at ************** and email your resume to ****************** Very Urgent Job Opportunity! Serious and experienced A&P Mechanic with Airframe & Powerplant License. Lear Jet, Dassault Falcon Jet, Gulfstream, Citation, Bombardier, Hawker Beechcraft, Embraer, etc. Aircraft Mechanics! DUTIES & RESPONSIBILITIES: Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures Communicate as required to receive and understand work assignments Perform complex aircraft inspections, repairs, and modifications with minimal supervision Coordinate with other departments as needed to ensure compliance with internal and FAA inspection and documentation requirements Properly complete work order sign-offs and other paperwork in a timely and accurate manner. Ensure that all work accomplished meets quality standards and specifications MINIMUM REQUIRED QUALIFICATIONS: High school diploma or equivalent. FAA Mechanics Certificate with Airframe and Powerplant Rating. Read and interpret aircraft diagrams, charts and schematics. Lift up to 50 lbs. Must not be allergic to fuels, oils, hydraulic fluids and cleaning solvents. Work and bend in confined work space. Must have manual dexterity required for technician. Must be able to repeatedly enter and exit aircraft using stationary steps/stairs. ADDITIONAL DESIRED QUALIFICATIONS: Knowledgeable and experienced using computers and aircraft software. Successful completion of at least one (1) Maintenance School is a plus. Engine Run and Taxi qualified on business jet aircraft, preferably on Dassault Falcon Jet, Gulfstream, Citation, Bombardier, Lear Jet, Challenger, Global Express, Hawker Beechcraft, Embraer, etc. aircraft is a plus. ABOUT US: We care about you and your career, we care about you and the ones you care for, our success is your success, you are not just a contractor you're a valued team member and part of our family we look forward to working with you soon! HSGI, Inc. is a Full Service Aerospace, Engineering & IT Staffing & Consulting Firm supplying qualified technical and professional employees to the most reputable companies in the Aerospace/Aircraft industry-across the United States and abroad. Give Kelly Milowe a call/text at ************** and email your resume to ******************

Who we are: Inductotherm was founded on simple principles, People, Products and Partnership-to provide the foundry industry with efficient and advanced induction equipment. Our core values of customer service, quality and reliability, value, along with design and technology have been the keys to our continued success. We help the metal casting industry grow stronger through our advanced technologies, continuous education and ongoing support. We strive to continue to manufacture the highest quality equipment and work towards ensuring that the equipment is the most efficient to promote a sustainable environment. What you will do Candidate will work on assembling small components, Junction boxes, MCCs and remote stations for power supply units. Fabricating manifolds, brazing and soldering pipe fittings, and light mechanical assembly. Experience in installing mechanical and electrical components, and reading mechanical and electrical drawings. Essential Functions: Math skills - adding, subtracting, multiplying, dividing and working with fractions. Able to read measuring devices - rulers, tape measures, squares, levels, Vernier's, and formulas. Mechanical aptitude - able to use and operate power tools, i.e.: band saw, shear, hydraulic press, hydraulic bender, drill press, table disk sander, etc. Able to read and comprehend mechanical drawings, schematics and specifications. Maintain a safe working environment for oneself and co-workers at all times. Perform general housekeeping as required. Regular in attendance and able and willing to work a reasonable amount of overtime. Will handle miscellaneous duties as assigned. Able to operate an overhead crane, drive a forklift and electric pallet truck. Non-Essential Functions: Industrial painting. Essential Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Able to see, have good perception, and distinguish between colors. Able to stand, climb, and bend for 8-10 hours. Have good strength and be able to lift up to 51 lbs. Quick hand and arm movement, or the movement of both hands to grasp, manipulate, or assemble objects. Communicate information and ideas, both written and verbally so others will understand. Have a valid driver's license. Able to travel on short notice by public transportation including (i.e.: aircrafts, trains, bus, cars) domestically and internationally. Non-Essential Physical Requirements: Must disclose any surgical implants, pins, braces or other devices that could be affected by induction fields. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. What you will bring High School Diploma or GED. Technical certifications or related training What we Offer / Why Choose Inductotherm Monthly Incentive Bonus Competitive Salary Employee Discounts Profit Sharing Plan Health/Dental/Vision within 30 days Tuition Assistance 401(k) Condition of Employment: Must be able to satisfactorily complete the Inductotherm Corp. hiring process requirements which includes a comprehensive assessment, drug testing, and a background check. The Company complies with the Drug-Free Workplace Act of 1988 and federal laws and regulations. Inductotherm Is E-Verified. All offers of employment are contingent upon the successful completion of the E-Verify process to confirm eligibility to work in the United States.

Job Description Are you interested in becoming a part of an innovative in-house maintenance facility working on private aircraft? Flexjet, an award winning organization, is currently looking for an experienced, certified Aircraft Maintenance Technician (AMT) to join our team! This position will be responsible for performing routine inspections, troubleshooting, and repairs including airframe structures, engines and aircraft systems. The Aircraft Maintenance Technician (AMT) will make repairs and conduct tests to keep equipment operating efficiently and safely. Please note, this position will require working nights. This position is located in White Plains, New York. Starting Pay Rate $ 85,120.00 + (based on experience). DUTIES & RESPONSIBILITIES Perform all airframe and powerplant repairs and modifications required to meet company and FAA requirements Remove and disassemble defective parts; assemble and install of replacement parts and testing aircraft system Operate all power tools and equipment necessary to accomplish job assignments Complete all required maintenance records in an accurate manner to include accurately reporting of times required to accomplish the tasks assigned Must support all company policies and safety programs to include OSHA and EPA regulations Interpret technical manuals, drawings and blueprints Present a clean and neat work area Demonstrate professionalism and deliver satisfaction to the internal/external customer Perform other related duties & responsibilities as assigned EDUCATION & EXPERIENCE FAA Airframe & Powerplant License is required 2-4 years directly related aviation experience (corporate aircraft experience preferred) At least 2 years of fleet type experience desired Good working knowledge of Federal Aviation Regulations (FAR) Part 145, 135, 121 Sheet metal experience is preferred but not required REQUIRED SKILLS Successful candidate will be highly motivated and work effectively under pressure and time constraints Must have the ability to multi-task within a team environment Strong working knowledge of Windows and MS Office programs Possess proven inspection competencies Must be detail-oriented and well organized; demonstrate excellent communication skills, and a positive attitude Specialized aircraft tooling will be furnished by the company WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme weather conditions. The noise level in the work environment and job sites can be loud. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 10 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Working at Breeze Airways is an exciting endeavor and a serious commitment to bring “The World's Nicest Airline” to life. We work cross-functionally with truly awesome Team Members to deliver on our mission: “To make the world of travel simple, affordable, and convenient. Improving our guests travel experience using technology, ingenuity and kindness.” ***$10,000 Cash Bonus will be awarded after a 12 month commitment to Breeze*** $5,000 after six months $5,000 after 12 months **Our BDL AMTs also receive a stipend of $800 a month** Breeze is hiring- join us! Breeze Airways is the newest, nicest, fastest growing airline with maintenance bases in Windsor Locks, CT (BDL), Charleston, SC (CHS), New Orleans, LA (MSY), Norfolk, VA (ORF), Provo, UT (PVU), Tampa, FL(TPA), Providence, RI (PVD), Orlando, FL (MCO), Fort Myers, FL (RSW) and Raleigh-Durham, NC (RDU)! Breeze is looking for great and experienced talent. Your entry pay will be based on your experience and our established criteria. Year Hourly Pay 1 $30.50 2 $31.00 3 $31.50 4 $34.50 5 $36.00 6 $37.00 *$2.00 shift differential added when working from 9:00PM - 7:30AM The Aircraft Maintenance Technician (AMT) is responsible for performing maintenance, preventative maintenance, and alterations of Breeze aircraft, including troubleshooting, performing run-up and taxi procedures, and signing mechanical flight releases. The Aircraft Maintenance Technician reports to a Line Maintenance Supervisor and carries out instructions as assigned in accordance with FAA regulations and Breeze policy and procedures. As certified AMTs, you have an important role to ensure the safety of our fellow Breeze Team members and Guests as well as the airworthiness of our fleet. Here's what you'll do Perform all assigned maintenance duties in accordance with the Breeze General Maintenance Manual (GMM) Responsible and accountable for all work performed Complete all appropriate Breeze forms on all work assigned and performed Properly handle all parts, units, assemblies, and aircraft while in the repair process Ensure that all documentation is kept current as to open discrepancies and completed corrective actions Complete all associated and required documentation for all maintenance work performed or inspections conducted accurately and correctly Submit personal OJT Task Cards on time and accurately Maintain the work area in a safe, clean, and operative condition and ensure all tools are accounted for at completion of all assigned tasks Properly care for and use tooling and equipment used for aircraft maintenance Notify the Maintenance Supervisor and all other appropriate Team Members of any condition that would compromise the airworthiness of Breeze aircraft Maintain a valid Airframe & Powerplant (A&P) Certificate, or Repairman Certificate, and keep the certificate available for inspection by the FAA, NTSB, or Breeze Supervisor/Manager Perform other duties and tasks as assigned by Maintenance Leadership, MOC, and/or DOM Achieve performance measures and adhere to established standards in conjunction with Breeze Aviation Group Values of Safety, Kindness, Integrity, Ingenuity and Excellence Here's what you need to be successful Minimum Qualifications Must hold a current, valid FAA Airframe and Powerplant License (A&P) with no history of infractions and recent experience on commercial aircraft types Ability to read and interpret aircraft maintenance manuals and specifications Must have a valid driver's license Must be at least 18 years of age High school diploma or equivalent educational achievement Must have a valid passport with no travel restrictions Must have authorization to work in the US as defined by the Immigration Reform Act of 1986 Must have the ability to travel unrestricted to and from the United States Must be flexible and willing to work all shifts to support a 24/7 operation. Must be willing to travel 20% of the time Must be willing to work with other departments within the company as needed Must pass a DOT pre-employment drug test Must pass a TSA required fingerprint-based criminal history records check and a Breeze background check Preferred Qualifications Understanding and working knowledge of FAA regulations including FAR part 121 operations Experience maintaining Embraer E-Jet and/or Airbus A220 family aircraft Familiar with an airline Maintenance Information System (MIS) such as TRAX Degree in Aerospace, Aviation Maintenance or Business Degree preferred Skills/Talents Skills in Microsoft Office Suite (Word, Excel, Outlook) Must be fluent in English Exemplifies Breeze's safety culture, values, and mission Excellent oral and written communication skills Excellent problem-solving skills Ability to work with individuals and teams at all levels in the organization Perks of the Job Health, Vision and Dental Health Savings Account with Breeze Employee Match 401K with Breeze Employee Match PTO Travel on Breeze and other Airlines too! Breeze Airways provides equal employment opportunities to all Team Members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Breeze Airways will never request your Social Security Number, Driver's License or Date of Birth on our job postings. Job Postings requesting any or all of this information should be regarded as a scam. To ensure you are applying to an actual Breeze Airways posting, please apply online at ***************** then click “Careers” at the bottom of the page.

Farmingdale State College is looking to hire part-time FAA Aircraft Maintenance Technicians. The chosen candidates will be responsible for the following: * Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools. * Check for corrosion, distortion, and invisible cracks in the fuselage, wings, and tail, using inspection equipment. * Clean, refuel, and change oil in line service aircraft. * Conduct routine and special inspections as required by regulations. * Disassemble engines, and inspect parts such as cylinders for corrosion, wear, warping, cracks, and leaks. * Examine and inspect aircraft components, including landing gear, hydraulic systems, and de-icers to locate cracks, breaks, leaks, or other problems. * Prepare and paint aircraft surfaces. The college particularly welcomes candidates with knowledge, skills and abilities that include: * Commitment to diversity and university initiatives supportive of diversity and inclusion. * Interest in participating in student-centered service activities. * Desire to apply expertise in promoting civic engagement with the College's many community partners. Requirements: MINIMUM REQUIRED QUALIFICATIONS: Must have Airframe and power plant License. Flexible hours and weekend work. ADDITIONAL PREFERRED QUALIFICATIONS: Bachelor's degree or greater Additional Information: This is a part-time position. * Salary: $22/hour, may increase commensurate with experience The Consumer Information web page can be viewed at the following link *********************************************************** This page describes various services, information and statistics on many different aspects of the College's operations. The State University of New York offers excellent fringe benefits including health insurance options and retirement plans. Click here for New York State Benefits Summary Farmingdale State College's commitment to inclusive excellence is an important part of our mission of public education and our culture. At Farmingdale State College, we continues to work on building a community that supports freedom, mutual respect, and civility. We seek others who support these values of diversity and inclusiveness and candidates of all diverse backgrounds who wish to participate in our cultural aspirations are welcome and encouraged to apply. The College is an Equal Opportunity/Affirmative Action employer and does not discriminate on the basis of race, color, national origin, religion, creed, age, disability, sex, gender identity, sexual orientation, familial status, pregnancy, predisposing genetic characteristics, military status, domestic violence victim status or any other legally protected status. Pursuant to Executive Order 161, no State entity, as defined by the Executive Order, is permitted to ask, or mandate, in any form, that an applicant for employment provide his or her current compensation, or any prior compensation history, until such time as the applicant is extended a conditional offer of employment with compensation. If such information has been requested from you before such time, please contact the Governor's Office of Employee Relations at ************** or via email at ****************. Application Instructions: Interested candidates may apply and submit the required documents listed below by clicking on the "Apply Now" link at the bottom of this page. We require the following documents: Cover Letter Resume/CV VISA SPONSORSHIP IS NOT AVAILABLE FOR THIS POSITION Farmingdale State College seeks a broad and diverse pool of candidates for this position. The College is an Equal Opportunity/Affirmative Action employer and does not discriminate on the basis of race, color, national origin, religion, creed, age, disability, sex, gender identity, sexual orientation, familial status, pregnancy, predisposing genetic characteristics, military status, domestic violence victim status or any other legally protected status. URL: ****************************** Only applications submitted online will be accepted, no phone calls please.