Aircraft mechanic jobs in Henderson, NV

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic II (Ordnance) Task Description: Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Responsibility: To perform Intermediate level maintenance and modifications on SE, IMRL and aircraft components in the physical custody of Fleet Readiness Center West Detachment China Lake, in support of VX-9 and VX-31 and outlying areas covered under the IMRL program. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Intermediate Level maintenance and possess one or more of the specialties of the assigned aircraft below: Ordnance and related sub-systems Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. Aircraft Mechanic II shall have experience writing with clarity and technical accuracy and exhibit effective leadership qualities and ensure adherence to all applicable policies and procedures. Possess a high degree of expertise in the control and coordination of aircraft maintenance. Thorough working knowledge of applicable maintenance/technical manuals and publications. Thorough working knowledge of aircraft maintenance records. Working understanding of the aircraft and aircraft systems TASK REQUIREMENTS: Familiar with duties assigned to personnel within all work centers. Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. Scheduled and unscheduled maintenance. Maintenance Control planning and management. Aircraft maintenance action documentation via logs, records, forms, and electronic means Support Equipment (SE operation and inspections. Corrosion Control/Aircraft Painting. Troubleshooting Preservation/de-preservation. General Aircraft Maintenance. Ordnance handling, limited to unjamming related equipment/ALSS maintenance. Technical Directive compliance and modifications. Individual Material Readiness List (IMRL), and Metrology and Calibration (METCAL) Program Management. Maintain Aircraft, Engines, and SE Logbooks. Aviation Life Support System (ALSS) Maintenance. Central Technical Publications Library Programs Management Dispersed Technical Publications Librarian Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment. Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Perform other tasks as directed. PREFERRED QUALIFICATIONS: Ten or more years' experience with NALCOMIS/OOMA Ten years extensive knowledge of Naval Aviation Maintenance Program (NAMP). Familiarity and ability to use military tech manuals. Advanced Corrosion Control Course Attended Quality Assurance Admin course or Equivalent. BASIC QUALIFICATIONS: Individual (I) Aircraft Maintenance Qualification AO “C” school, FRAMP training for Navy attack/fighter aircraft or USMC/USCG equivalent, and conventional weapons loading school Must be familiar with aircraft conventional ordnance, ordnance, ordnance launching mechanisms, armament loaders and associated special and general support equipment Must have three years' experience working “O” level aviation ordnance, one of which must have been with last three years Must be certifiable to drive five-ton ordnance truck Must pass annual medical screening and physical administered by doctor New hire personnel should have five years' aviation maintenance experience on applicable T/M/S aircraft Six years extensive knowledge of Naval Aviation Maintenance Program (NAMP). Must have valid driver's license Must be eligible to qualify for and maintain SECRET level security clearance Must be able to work 1 st , 2 nd , 3 rd and weekend shift schedule as required. Must be able work flexible work-week schedules i.e. Mon-Fri, Sun-Thur, Fri-Mon or as required. Must be able to pass a background check. Must satisfactorily complete the equivalent of a trustworthy National Agency Check plus Written Inquiries with Credit Check (NACI), IAW DTM-08-003 “Next Generation Common Access Card (CAC) Implementation Guidance”. Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must be able to deploy to support off station exercises and perform other support duties as assigned. Compensation $50.91/hour Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 6.16 hours of PTO per pay period. KAI employees at China Lake FRCW have a minimum of 12 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Job Description Tactical Air Support Inc. Aircraft Mechanic Reno, Nevada Salary rate: $30.00 - $50.00/hourly DOE Tactical Air is currently seeking an Aircraft Mechanic to join our Maintenance team. This position will support Tactical Air's fleet of fighter aircraft with over 75 years of combined experience in tactical aviation maintenance and more than 30 years of military adversary contract maintenance. The Maintenance staff are a dedicated team comprised of experienced, A&P-certified, and tactical aircraft mechanics, technicians, and logisticians who all work towards ensuring safe and seamless ground maintenance operations. Responsibilities The ideal candidate for the Aircraft Mechanic position will be professional, highly productive, disciplined, team-oriented, technically astute, and responsive to the needs of the company, colleagues, and customers. This position will report to the Director of Maintenance and will perform organizational, intermediate, and limited depot-level maintenance to include inspection, operational test, repair, modification, and troubleshooting on all assigned aircraft, components, and equipment. This position will apply advanced technical knowledge to solve complex problems and to provide technical assistance, guidance, and instruction to other teammates as needed. Requirements High School diploma/GED with at least 1 year of applicable work experience. Current work experience in aircraft maintenance occupational field, preferably in the military or with a government aviation maintenance contractor. Experience with high performance military aircraft (F-5/T-38). A&P Certification, or ability to obtain certification. Support Equipment Operator License (Tow Tractor, N2 Servicing Trailer, and Mobile Start Unit at a minimum). Valid state driver's license. U.S. Citizenship with the ability to obtain/maintain a government security clearance. Desired Experience/Skills A&P certification. Physical Demands Occasional lifting of up to 50 pounds (with assistance, if required). Regular use of hands and fingers to handle, feel, or operate objects, tools, or controls; reaching with hands and arms. Regularly ascend/descend stairs and/or ladders. Work Authorization Must be lawfully eligible to work in the United States and complete a U.S. government I-9 Form. Tactical Air Support is a Drug & Alcohol-Free Workplace . Pre-employment, random, or for cause drug/alcohol testing (including for marijuana) required. Pre-employment and ongoing physical certifications required. Occasional aircraft hangar or warehouse environment with exposure to loud noises, fumes from engines and chemicals, unpredictable climate (hot/cold), and electrical shock, or trip or slip hazards. May be exposed to or required to handle hazardous materials. Specific work hours determined by operational, departmental, or contractual requirements. Occasional evening, weekend, holiday, and overtime work may be required. Occasional travel to various work sites throughout the U.S. may be required. Tactical Air Support is an EEO/AA/Disabled/Veterans Employer I understand that if an offer of employment is made, I may be required to undergo investigation into all statements and references contained in this application. Said investigation may include credit, driving, criminal background, professional references, and other background checks. By applying for this position, I authorize post-offer investigation into my background as necessary and as a condition of employment. Note: a criminal conviction does not constitute an automatic bar to employment and will be considered only as it substantially relates to the position in question. California Only : You have a right to receive public records documenting an arrest, indictment, conviction, civil judicial action, tax lien, or outstanding judgment that are obtained without using the services of an investigative consumer reporting agency (CA Civil Code §1786.53). Pursuant to California law, you are entitled to waive this right.

TSC's Airborne Intelligence, Surveillance and Reconnaissance (AISR) Division is actively recruiting an expert Aviation Maintenance Technician to join our team in support of Flight & Ground Operations of a developmental aircraft. The ideal candidate will have a strong background in aviation mechanics, in both manned and unmanned aircraft systems, possess an acute attention to detail, as well as exceptional troubleshooting/problem solving skills to support the aircraft from development through operational phases. As part of the team, you will be responsible for conducting maintenance, inspections, and repairs on manned and unmanned aircraft systems and components, ensuring that all aircraft are mission-ready and meet applicable legal, contractual and safety performance standards. Ground & Flight Operations will be conducted at various test sites, with the primary location being located at Fort Huachuca, AZ (Sierra Vista). This position will formally report to the Test & Training Site Lead but will be responsible to multiple stakeholders within/outside of the division. This position will be responsible for developing and managing aviation Ground & Flight Operation Procedures, including the development of maintenance manuals, formal training programs, technology insertion. As an integral member of the Aviation Operations leadership team, other duties may be assigned. Key Responsibilities: Perform routine and preventive maintenance on manned and unmanned aircraft, including airframes, engines, avionics, line-replaceable-units (LRU) and other system components. Troubleshoot, repair, and replace defective or malfunctioning parts and systems. Support the development and testing phases of new technologies and configurations. Conduct inspections of aircraft systems in compliance with regulatory requirements and company safety standards. Assist in the assembly and disassembly of aircraft for flight tests, demonstrations, and operational missions. Maintain accurate maintenance logs and documentation for all aircraft. Collaborate with the engineering team to address technical issues and implement solutions during all phases of the aircraft lifecycle. Ensure all tools and equipment used are in proper working condition and comply with safety standards. Support operational personnel during pre-flight and post-flight procedures as required. Responsible for safe and effective daily operations of aircraft maintenance and flight line operations. Ensure compliance with; flight & ground procedures, training procedures, and standardization & evaluation procedures. Ensure worksite safety, and completion of digital and paper logbooks, maintenance records, FOD and tool control, Technical Orders, part accounting. Assures timely, accurate records are maintained. Execute work calendars, support Internal Audits and participate in performance reviews. Assist in preparing technical reports and briefings for the ADO and engineering/production team. Maintain access to and requirements for COMSEC access. Assists in the tracking of consumables, recording MX failures. Monitors the use of parts and tools and maintains inventories/logs. Required Knowledge: Through understanding of all physical aspects of airframe, powerplant, electrical systems, mechanical systems, RF systems, troubleshooting, personnel leadership. Past history of FAA Flight and Maintenance standards, airworthiness, and safety. Maintenance Technical Inspector Experience in an operational capacity of aviation mechanics. Adherence to DCMA procedures and reporting maintenance in logbooks. Use of maintenance manuals, Technical orders, Compliance Procedures. FOD control program adherence, execution. Required Skills: Exceptional knowledge of aviation flight line procedures and Maintenance Operations. Strong attention to detail and analytical skills. Excellent organization and planning skills, and excellent verbal and written communication. Ability to work independently in a fast-paced environment and get along with others. Ability to review, interpret, and apply industry standards (FAA/IACO) and ensure compliance to contract terms and requirements. Knowledge and experience with Air Vehicle Systems and subsystems, and Technical Manuals (General Systems, Job Guides, Work Instructions, Fault Isolation, etc.). Maintain Aircraft System maintenance logs and configuration with Logistician. Ability to obtain Crew Chief Instructor designation after 6 months of employment. Computer Skills Highly Proficient in Microsoft office suite. Able to create documents, spreadsheets, presentation materials quickly and efficiently. Experience with technical writing, preparation of reports in Adobe. Type >30 words per minute. Digital computer logging of Aviation Maintenance procedures - familiarity with commercial/military requirements for logging and maintaining aircraft. Understanding MS Windows computer functions and ability to teach others how to navigate digital maintenance resources. Required Qualifications: FAA Airframe and Powerplant (A&P) certification and 7 years' of experience in aviation maintenance operations. Minimum of 3 years group 3-5 UAS maintenance operations experience. Strong knowledge of aircraft systems, including engines, avionics, flight controls, and airframes. Strong mechanical and electrical troubleshooting skills. Prior leadership experience in an aviation maintenance role. Knowledge and experience with Aircraft Technical Manuals (General Systems, Job Guides, Fault Isolation, etc.). Experience installing and maintaining electrical systems. Ability to troubleshoot electrical issues, read electrical diagrams, schematics, and understand the theory of operation. Experience with developmental or experimental aircraft is a plus. Experience with Electrostatic Discharge (ESD) precautions and electrical safety measures. Experience using multimeter, oscilloscope, and like equipment to test electrical systems. Ability to perform line and site level maintenance and repairs. Ability to maintain aircraft maintenance logs and configuration. Excellent organization skills. Excellent written & verbal communication skills. Active SECRET security clearance. FAA Class 3 Medical. Willingness to travel as needed for field operations and support. Work Experience in aviation field in OCONUS (deployed) location preferred. Clean Background Check. Physical Work environment: The position will require working in austere locations with limited access to selective food, shelter provided at worksite. Ability to work outside for 12 hr. shifts in >100 deg F weather. Ability to lift and carry equipment and tools (up to 50 lbs). Ability to work in various weather conditions, including extreme heat and cold. Ability to work at heights or in confined spaces as needed. Must have good vision (corrective lenses acceptable) and hearing, as required for safety in aircraft maintenance. While performing work duties, the employee is regularly required to walk, sit and stand and reach with hands and arms. This position requires close vision, distance vision, color vision, depth perception and ability to adjust focus. Safety Equipment: Ability to use PPE for mechanical, audible, and chemical hazards Medical Requirements: A FAA class 3 flight physical is required annually. In addition to being found fit for the specific deployment by a medical and dental evaluation prior to deployment, there is also the requirement to comply with additional medical restrictions IAW MOD 15. MOD 15 is a set of physical and psychological standards put forward by the United States Central Command, and applies to all U.S. uniformed service members, government civilian employees, U.S. Department of Defense (DoD) contractor employees, and volunteers deploying to CENTCOM's area of responsibility. Final determination for approval resides with the CENTCOM Surgeon prior to deployment. U.S. Citizenship Required: Yes ACTIVE SECRET DoD Security Clearance Required for this Position: Yes Drug screening: Required for employment, may be tested any time. Travel: Yes, less than 25%. The candidate must be able to travel and/or deploy with relatively short notice in the event of a manning shortfall. Relocation Assistance Available: Yes Position Contingent upon Award of Contract: No TSC Benefits: TSC offers a stable work environment, a competitive salary and a comprehensive benefits package; including ESOP contributions, 401k Matching Program, Flexible Work Schedules, Tuition Reimbursement, Paid Leave and much more. Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Training Tomorrow's Technicians to Become Skilled, Employable and Essential. About Us - Big Changes, Better Benefits - Join us today! The Aviation Institute of Maintenance (AIM), established in 1969, is a premier institution dedicated to advancing the field of aviation maintenance through exceptional education and training. With 15 campuses nationwide, AIM is a cornerstone in the aviation industry, accounting for 20% of all students attending FAA-certified Airframe & Powerplant (A&P) schools across the country. Each year, AIM proudly contributes to the graduation of nearly one in four certified aircraft technicians in America. At AIM, you'll become part of a dynamic team of educators and leaders, all united by a shared commitment to delivering top-notch training and ensuring student success. We are passionate about equipping the next generation of aircraft technicians with the skills and knowledge needed to excel in the aviation industry. If you are eager to make a meaningful impact and help shape the future of aviation maintenance, AIM offers a rewarding environment where your contributions will truly matter. Position Purpose The Aircraft Mechanic Instructor is responsible for delivering engaging and comprehensive instruction in assigned courses, ensuring that students grasp both theoretical concepts and practical applications in aircraft maintenance. In addition to teaching, the instructor manages essential administrative tasks, such as maintaining records, assessing student performance, and collaborating with faculty to enhance the curriculum. This role is pivotal in fostering a supportive learning environment that promotes student success and prepares them for careers in the aviation industry. Key Duties Provide engaging and effective teaching in aircraft maintenance principles while developing curricula that aligns with industry standards. Create a positive classroom atmosphere that encourages student participation and offers individualized support to enhance student success. Oversee administrative responsibilities, including maintaining accurate records and ensuring compliance with industry regulations and standards. This position ensures that the aircraft maintenance training program effectively prepares students for careers in aviation, aligning with industry standards and contributing to the overall success of the institution. Job Responsibilities Teach classes on a scheduled basis, creating an inclusive and welcoming environment that fosters student engagement and enhances learning in aircraft maintenance. Collaborate with the Program Coordinator, Campus Director of Education, and Campus Executive Director to develop and refine curriculum, prepare course materials, and schedule classes, ensuring alignment with industry standards. Maintain a clean, organized, and safe classroom and laboratory environment, ensuring all tools and equipment are properly maintained for student use. Establish and maintain accurate academic and attendance records for each student, submitting attendance, grades, evaluations, and other documentation as required by institutional procedures. Proactively notify the Supervisor of any current or potential issues that require immediate attention and implement proven retention techniques to support student success. Complete assigned performance-based teacher education modules, participating in classroom observations and instructor evaluations, and responding to student feedback to enhance instructional effectiveness. Attend and/or lead in-service training sessions, faculty meetings, and other mandatory gatherings to ensure ongoing professional development and collaboration with peers. Assist in managing the inventory of department equipment and supplies, submitting replenishment requests to the Supervisor or appropriate personnel as needed. Monitor student attendance closely, alerting the Supervisor to any absences, particularly at the first, third, and fifth occurrences, to address potential retention issues. Complete other tasks and projects as assigned by the Supervisor, contributing to the overall success of the aircraft maintenance program. Required Qualifications FAA Airframe and Powerplant Mechanic Certificate Minimum three (3) years of hands-on experience in aircraft maintenance (special considerations will be given for more diverse experience) High School Diploma or GED Strong command of both theoretical and practical aspects of aircraft maintenance, with contemporary knowledge and a commitment to ongoing professional development. Ability to thrive in a fast-paced, performance-driven, and compliance-oriented educational setting. Detail-oriented, analytical, and highly organized, with the capability to multitask and perform well under pressure. Demonstrate a high level of integrity, a strong work ethic, and professionalism in all interactions. Effective verbal and written communication skills, with a strong emphasis on customer service in an educational context. Highly motivated and goal-oriented, with strong problem-solving abilities. Ability to work independently as well as collaboratively within a team, exhibiting exceptional interpersonal skills. Excellent computer skills, including proficiency in MS Office applications such as Word, Excel, Outlook, SharePoint, and Teams. Exhibits a positive, team-oriented attitude by remaining flexible and available to work outside of scheduled hours when needed, as directed by the Supervisor. Preferred Qualifications Associate's degree in related field CampusNexus experience Work Schedule Applicants will be considered for the following schedules: Option 1: Day shift - Monday - Thursday: 6:00 am - 3:30 pm; Friday: 8:00 am - 12:00 pm Option 2: Evening shift - Monday - Thursday: 1:30 pm - 11:00 pm; Friday: 9:00 am - 1:00 pm What We Offer This position pays up to $31.25 per hour, based on experience, qualifications, and other relevant factors. In addition to a competitive base salary, we offer a comprehensive benefits package, including: 401(k) and Matching: Secure your future with our competitive retirement savings plan. Comprehensive Health Coverage: Enjoy Health, Dental, and Vision insurance to keep you and your family healthy. Life Insurance: Peace of mind with life insurance options. Parental Leave: Support for new parents during important life transitions. Paid Time Off: Recharge with paid time off to promote work-life balance. Employee Assistance Program: Access to resources for personal and professional support. Tuition Reimbursement: Invest in your future with financial support for further education. We are committed to providing a rewarding compensation package that supports both your professional growth and personal well-being. #LI-Onsite AIM is a proud equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or any other characteristic protected by applicable law. We believe that a diverse workforce contributes to the success of our company and are dedicated to fostering a culture of respect, equity, and inclusion.

The UH-60 Aircraft Mechanic - Avionics is responsible for the inspection, maintenance, troubleshooting, repair, and modification of avionics systems installed on the UH-60 Black Hawk helicopter. This position ensures aircraft avionics systems are fully mission-capable, safe, and compliant with applicable technical manuals, regulations, and operational requirements. Essential Duties and Responsibilities Perform scheduled and unscheduled maintenance on UH-60 avionics systems, including communication, navigation, flight control, and mission equipment Troubleshoot and isolate avionics system malfunctions using technical manuals, schematics, test equipment, and diagnostic tools Remove, repair, replace, and reinstall avionics components such as radios, GPS, flight instruments, wiring harnesses, displays, sensors, and integrated avionics units Conduct operational and functional checks to verify system performance and airworthiness Perform aircraft inspections in accordance with maintenance schedules and technical directives Document maintenance actions accurately in aircraft logs, maintenance records, and electronic tracking systems Interpret and comply with applicable technical manuals, maintenance procedures, and safety regulations Assist with aircraft modifications, upgrades, and incorporation of avionics kits or mission equipment Support ground and flight operations as required, including preflight and postflight inspections Maintain avionics tools, test equipment, and work areas in a clean, safe, and serviceable condition Adhere to safety, quality, and environmental standards at all times Required Qualifications High school diploma or equivalent Completion of military or civilian avionics maintenance training Experience maintaining UH-60 (Black Hawk) avionics systems or similar rotary-wing aircraft Ability to read and interpret wiring diagrams, schematics, and technical publications Proficiency with avionics test equipment and diagnostic tools Ability to work independently and as part of a team Strong attention to detail and problem-solving skills FAA Airframe and/or Powerplant (A&P) license Prior military aviation maintenance experience (15 series, 68 series, or equivalent) Experience with integrated avionics systems, digital flight displays, and mission equipment Knowledge of Army or DoD maintenance documentation systems Active or ability to obtain a security clearance (if required) Physical Requirements Ability to lift, push, and pull up to 50 pounds Ability to work in confined spaces and at heights Ability to stand, bend, kneel, and climb for extended periods Willingness to work outdoors in varying weather conditions Work Environment Hangar, flight line, and field environments May involve shift work, weekends, and deployment or travel as required Benefits Available Employee & Family Health, Dental, and Vision Insurance Options $50,000/$100,000 Life/AD&D Insurance and 24/7 Teledoc Svcs Retirement Savings Plan (similar to a 401(k) Employee Assistance Program (EAP) Cash Equivalent Benefits Paid Federal Holidays Paid Sick Leave Paid Vacation Other benefits may include, but not be limited to: a variety of other Personal Leave days off, Uniform and PPE provisions, paid training, performance awards, and occasional meal, beverage, or snack accommodations. (Please Note: Not all benefits will apply, based on a variety of factors, i.e., opt out and plan provisions, etc.) LOGMET is an Affirmative Action and Equal Opportunity Employer: we welcome and encourage all individuals, including veterans and individuals with disabilities, to apply! If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact LOGMET's Human Resources Department Manager directly: *************, **************, Ext.4 We sincerely appreciate your consideration; please feel free to contact LOGMET's HR Department anytime, with any questions you may have.

Job Description GAL AeroStaff Ltd. is an aerospace staffing is a company specializing in temporary and permanent staffing for general and technical positions the aviation and aerospace industry. In keeping with this goal, each benefit program has been carefully devised. These benefits include time-off benefits, such as vacations and holidays, and insurance and other plan benefits. We are constantly studying and evaluating our benefits programs and policies to better meet present and future requirements. AerSale - Non-Licensed Aircraft Mechanic Location: open to all sites Pay: $24-$36/hr DOE Travel Pay: $500 Referral Bonus: $250 Tools Required Open to Military Experience About the Role AerSale is seeking skilled Non-Licensed Aircraft Mechanics to support inspection, repair, modification, and overhaul of commercial and cargo aircraft. This position works in a high-volume MRO environment with hands-on tasks across multiple aircraft platforms. Candidates with strong mechanical aptitude-whether from aviation, military, automotive, diesel, or related fields-are encouraged to apply. Key Responsibilities Perform routine and non-routine aircraft maintenance tasks under the supervision of licensed personnel. Assist in troubleshooting, component removals/installs, and system repairs. Follow maintenance manuals, technical data, and work instructions. Complete task documentation accurately and ensure work meets FAA and company standards. Use hand tools, power tools, and ground support equipment safely and correctly. Maintain a clean, organized, and safety-focused work environment. Support A&P mechanics, inspectors, and leads as needed to meet production goals. Qualifications Previous mechanical experience required; aviation or military preferred. Ability to read and understand basic aircraft manuals and technical instructions. Familiarity with safe use of aircraft tools and equipment. Must supply own basic toolset. Ability to work overtime and adapt to changing priorities in a fast-paced MRO setting. High school diploma or equivalent. Why Work with Us Competitive hourly pay: $24-$36/hr DOE $500 travel pay for eligible travelers $250 referral bonus Long-term MRO opportunity with advancement potential Work with a respected aviation maintenance organization across multiple aircraft platforms Supportive environment open to candidates transitioning from military or other mechanical industries

Full-time Description GMRE is currently recruiting for an Avionics Aircraft Technician. This position will be working on a traveling team through September 2028 to various locations and will be eligible for per-diem based on GSA.gov standards. The candidate will start at Las Vegas, NV. The Avionics Aircraft Technician will perform maintenance and must possess knowledge of the electronic principles involved in a number of applications such as radar, data processing, navigation and data display. Interprets and advises on maintenance procedures and policies to repair aircraft and related equipment. Must have the ability to recommend methods to improve equipment performance and maintenance. ROLES AND RESPONSIBILITIES Must be knowledgeable of electrical, electronic, and mechanical principles relating to electrical systems, concepts, and application of maintenance directives. Ability to interpret the meaning of symbols used in wiring diagrams, blueprints, and schematics. Must have the ability to properly handle, use, and dispose of hazardous waste and materials. Possess the skill to remove and replace F-16 aircraft parts and accessories/components. Have the skill to make adjustments and settings according to established Technical Data Specifications. Why Work for GMRE? GMRE is a small veteran-owned company who cares about our employees. We offer health, dental, and vision insurance, 401(k), vacation, Paid Time Off (PTO), or Paid Sick Leave (PSL) based on state laws, paid holidays, and life insurance to all permanent full-time employees. GMRE's mission is to provide high quality engineering and technical services to help our customers grow and succeed. GMRE is an equal opportunity employer. GMRE is committed to making employment decisions based on valid requirements, without regard to age 40 and over, color, disability, gender identity, genetic information, military or veteran status, national origin, race, religion, sex, sexual orientation or any other applicable status protected by state or local laws. This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Requirements REQUIRED SKILLS/ABILITIES Excellent verbal and written communication skills. Excellent interpersonal and customer service skills. Excellent organizational skills and attention to detail. Excellent time management skills with a proven ability to meet deadlines. Strong analytical and problem-solving skills. Ability to prioritize tasks and to delegate them when appropriate. Ability to function well in a high-paced and at times stressful environment. Ability to maintain regular attendance and punctuality. Ability to work flexible hours and be available to respond on short notice as needed. Ability to maintain professional appearance. EDUCATION AND EXPERIENCE Minimum of six (6) years total and two (2) years recent (within 4 years of task order PoP start) experience in aircraft maintenance support on F-16 aircraft as an avionics technician in order to accomplish required follow-on operations. Must have experience working with aircraft wiring, technicians will be installing Avionics system modifications by routing, terminating 10/100 and Gig Ethernet wiring, copper wires, primary power wires, Coaxial wires, shielded twisted pairs/triplets, and possibly triaxial wires/connectors. SECURITY CLEARANCE REQUIREMENTS Must have a minimum of an active U.S. SECRET clearance or the ability to obtain and maintain an active U.S. SECRET clearance and be subject to a government security investigation. Driving or renting a car for company business is expected with some frequency. For insurance purposes, a valid driver's license is required. Do you have the ability to pass a background check to be granted access to the specific working location installation bases to perform work for GMRE? PHYSICAL REQUIREMENTS Normal color vision as defined in AFI 48-123. Must be able to lift up to 50 pounds at times. TRAVEL REQUIRED Permanent Travel through September 2028.

Job DescriptionAre you eager to be part of an innovative team in the aviation industry, transforming the way we approach aviation technology?Our client stands as a prominent figure in the realm of aircraft window design, manufacturing, and the production of composite parts at their cutting-edge facility. Boasting ISO 9001:2015 / AS9100D certification, they specialize in aerospace window/windshield composite intricacies, sheet metal wing spars, and fuselage assemblies.They are currently on the lookout for a Regional Repair Sales / Aircraft Window Technician possessing an A&P License in locations including Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC.What's in It for You:Salary: $45,000-$60,000 annual bonus, potential for substantial monthly incentives Position Type: Permanent - Full-time. Benefits: Comprehensive package including Medical, Dental, 401k, Disability, Company-provided life insurance, and FSA.A Glimpse into the Life of an Aircraft Technician / A&P Mechanic:As the Aircraft Technician / A&P Mechanic, your primary mission is to provide aircraft window services to our existing clients while expanding our customer base and sales within your designated Regional Market. Your responsibilities include inspecting aircraft windows, assessing defects for airworthiness, repairing scratches, pits, and other window damage, as well as removing and installing replacement windshields and windows.Key Responsibilities: Removing existing windows. Preparing and installing new windows. On-call 24/7 to respond to customer requests for emergency AOG (Aircraft on Ground) services. Utilizing an orbital sander with various grits of sandpaper to restore damaged areas. Reviewing, interpreting, and applying technical data relevant to your tasks. Managing the acquisition of purchase orders from customers as per the provided quotes. Coordinating service schedules with aircraft owners/operators and maintenance managers. Completing and submitting billing information and evaluation forms to our headquarters in Wichita, KS. Providing the necessary airworthiness documents to customers upon job completion. Traveling as required to customer locations via ground transportation, air travel, or airlines. Compiling weekly expense reports detailing costs for gasoline, entertainment, and customer relations. Signing off on all work orders and maintaining part traceability records. Conducting daily visits and/or phone communication with both current and potential customers. Developing and expanding sales in the assigned Regional Market. Seeking guidance and direction as needed for your duties. Keeping your supervisor/manager informed of the status of your work. Reporting problems and potential issues to your supervisor/manager as soon as possible. Maintaining a neat and orderly work area. Presenting a well-groomed appearance suitable for the role and context. Respecting the confidentiality of company, customer, and personnel information. Performing additional duties and tasks as assigned by your supervisor. Assisting and training other employees as required. Qualifications: Education: High School Diploma/General Education Degree (GED). Experience: Preferred sales experience, 1 year of orbital sanding experience preferred, auto body experience preferred, previous aircraft experience preferred, A&P license or AMT certificate preferred, sales experience preferred. Technical Skills: Proficiency in using various measuring devices, strong mechanical aptitude, ability to read and interpret blueprints (preferred), ability to read and interpret technical manuals. Problem Solving/Decision Making: Ability to read and comprehend mechanical and technical manuals, applying them to practical field situations. Capability to work independently and communicate effectively with both internal and external customers, delivering exceptional customer service in a timely manner. Essential Job Functions/Physical Demands: The physical demands encompass standing on wings, moving in and out of cockpits, and working inside and outside aircraft. Travel is a requirement, with working hours ranging from 2 to 12 per day depending on demand. Ability to stand and/or sit for 8 hours a day. Ability to lift/carry weights of up to 70 lbs. Ability to twist, bend, and stoop for 8 hours a day. Ability to pinch and grip various tools with fingers and hands, using pushing and pulling motions for 8 hours a day. Ability to reach for 8 hours a day. Clear and effective communication skills. Proficiency in understanding and following work orders and process specifications. Capability to handle buffing and polishing tools for 8 hours a day. Comfort with climbing up and down ladders. If you're intrigued by the Aircraft Technician / A&P Mechanic role in Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC, seize the opportunity today!This job opportunity is presented by Total Aviation Staffing, LLC, an Employment Agency providing aviation staffing services.

Mission Support and Test Services, LLC (MSTS) manages and operates the Nevada National Security Site (NNSS) for the U.S. National Nuclear Security Administration (NNSA). Our MISSION is to help ensure the security of the United States and its allies by providing high-hazard experimentation and incident response capabilities through operations, engineering, education, field, and integration services and by acting as environmental stewards to the Site's Cold War legacy. Our VISION is to be the user site of choice for large-scale, high-hazard, national security experimentation, with premier facilities and capabilities below ground, on the ground, and in the air. (See NNSS.gov for our unique capabilities.) Our 2,750+ professional, craft, and support employees are called upon to innovate, collaborate, and deliver on some of the more difficult nuclear security challenges facing the world today. MSTS offers our full-time employees highly competitive salaries and benefits packages including medical, dental, and vision; both a pension and a 401k; paid time off and 96 hours of paid holidays; relocation (if located more than 75 miles from work location); tuition assistance and reimbursement; and more. MSTS is a limited liability company consisting of Honeywell International Inc. (Honeywell), Jacobs Engineering Group Inc. (Jacobs), and HII Nuclear Inc. Associate degree in field related to the position plus at least 9 years' progressive related experience or High School diploma plus 11 years' progressive related experience. Airplane and helicopter mechanics: Airframe and Power plant (A&P) FAA certificate required. Degree in Aviation Maintenance preferred. Professional experience maintaining turbine powered airplanes and helicopters is desired. Be proficient at troubleshooting and diagnosing turbine powered airplane and helicopter airframe, engine, and electrical systems. Working knowledge of Federal Aviation Regulations Parts 91, 65, 43, and 21. Effective oral, written, and electronic communication skills to include Microsoft Word, Excel, and electronic manufacturer's maintenance libraries. Participate in the Deployment Authorization Program (DAP) and be able to travel and work nonstandard hours and deploy on domestic and overseas missions on short notice on company aircraft or vehicle. Capable of lifting and carrying up to 75 lbs. Occasional overtime, weekend work, and travel may be required. Beechcraft B-350 airplane, Bell-412/212 helicopter and/or Leonardo AW139, Pratt and Whitney PT6 Series Engine experience and FAA Inspection Authorization are desired. The primary work location will be based at the Remote Sensing Laboratory at Nellis Air Force Base, Las Vegas, NV (RSL-N). Flexible work schedule can be negotiated with the manager; employees can work 5/8's, 9/80's or 4/10's work-weeks. Pre-placement physical examination, which includes a drug screen, is required. MSTS maintains a substance abuse policy that includes random drug testing. Must possess a valid driver's license. MSTS is required by DOE directive to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants offered employment with MSTS are also subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. In addition, Applicants for employment must be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship, at least 18 years of age. Reference DOE Order 472.2, “Personnel Security”. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Department of Energy Q Clearance (position will be cleared to this level). Reviews and tests for the absence of any illegal drug as defined in 10 CFR Part 707.4, “Workplace Substance Abuse Programs at DOE Sites,” will be conducted. Applicant selected will be subject to a Federal background investigation, required to participate in subsequent reinvestigations, and must meet the eligibility requirements for access to classified matter. Successful completion of a counterintelligence evaluation, which may include a counterintelligence-scope polygraph examination, may also be required. Reference 10 CFR Part 709, “Counterintelligence Evaluation Program.” MSTS is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, veteran status or other characteristics protected by law. MSTS is a background screening, drug-free workplace. Annual salary range for this position is: $81,681.00 - $122,532.80. Starting salary is determined based on the position market value, the individual candidate education and experience and internal equity. Seeking a motivated Airframe and Power plant technician joint our Aviation Maintenance Team based at Nellis Airforce Base, Las Vegas, Nevada. Daily responsibilities will be to perform scheduled/unscheduled maintenance and servicing activities on US Department of Energy Aircraft (Beechcraft B-350 airplane, Bell-412/212 helicopter and/or Leonardo AW139) operated by Mission Support and Test Services (MSTS), LLC. Key Responsibilities The NNSA Air unit is first and foremost an emergency response team. The emergency we are prepared for is rare. However, mechanics must be prepared to respond if activated. As such, MSTS has very reasonable but strict standby requirements for the response teams. Standby requirements and considerations include: Mechanics are required to be on standby as needed, usually 2-3 weeks at a time. Occasionally longer than 3 weeks depending on staffing. Mechanics are paid $40 per day extra to be on standby. Mechanics must be within 2 hours of your assigned base while on standby. Mechanics on standby must have reliable cell phone reception. Mechanics must remain fit to maintain the aircraft while on standby. If called out, mechanics must be able to deploy for potentially several weeks straight. Standby positions require an additional physical and various inoculations to maintain a deployable status. Deployments for several weeks at a time are possible for both emergency response and non-emergency response missions. Accomplish scheduled and unscheduled maintenance and servicing activities on US Department of Energy Aircraft (Beechcraft B-350 airplane, Bell-412/212 helicopter and/or Leonardo AW139,) operated by Mission Support and Test Services, LLC. Assist technicians and maintenance personnel in the development, integration, installation and removal of standard mission equipment in aircraft. Work with stockroom personnel to facilitate the timely requisitioning of all parts, materials and equipment needed to complete aircraft maintenance. Maintain aircraft in accordance with latest revision of the manufacturer's instructions, applicable FAA Federal Aviation Regulations and Aviation Operations Manual. Operate and maintain ground support equipment. May conduct inspections on work in progress during aircraft maintenance activities, coordinates modifications and major repairs with the FAA, and provides input to aircraft maintenance procedures. Responsible for compliance with airworthiness programs established by the airframe manufacturers. Plan and conduct work requiring judgment in the evaluation, selection, application, adaptation, and modification of standard techniques, guidelines, procedures, and criteria. Devise new approaches to maintenance. Plan and conduct independent work requiring judgment in the application of maintenance techniques. Apply conventional approaches to maintenance problems encountered. Plan, guide, or prepare administrative and technical documents as required for maintenance. May direct overall activities on specific assignments. Perform other work as assigned by Supervisor.

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.

Mission Support and Test Services, LLC (MSTS) manages and operates the Nevada National Security Site (NNSS) for the U.S. National Nuclear Security Administration (NNSA). Our MISSION is to help ensure the security of the United States and its allies by providing high-hazard experimentation and incident response capabilities through operations, engineering, education, field, and integration services and by acting as environmental stewards to the Site's Cold War legacy. Our VISION is to be the user site of choice for large-scale, high-hazard, national security experimentation, with premier facilities and capabilities below ground, on the ground, and in the air. (See NNSS.gov for our unique capabilities.) Our 2,750+ professional, craft, and support employees are called upon to innovate, collaborate, and deliver on some of the more difficult nuclear security challenges facing the world today. + MSTS offers our full-time employees highly competitive salaries and benefits packages including medical, dental, and vision; both a pension and a 401k; paid time off and 96 hours of paid holidays; relocation (if located more than 75 miles from work location); tuition assistance and reimbursement; and more. + MSTS is a limited liability company consisting of Honeywell International Inc. (Honeywell), Jacobs Engineering Group Inc. (Jacobs), and HII Nuclear Inc. **Responsiblities** Seeking a motivated Airframe and Power plant technician joint our Aviation Maintenance Team based at Nellis Airforce Base, Las Vegas, Nevada. Daily responsibilities will be to perform scheduled/unscheduled maintenance and servicing activities on US Department of Energy Aircraft (Beechcraft B-350 airplane, Bell-412/212 helicopter and/or Leonardo AW139) operated by Mission Support and Test Services (MSTS), LLC. **Key Responsibilities** + The NNSA Air unit is first and foremost an emergency response team. The emergency we are prepared for is rare. However, mechanics must be prepared to respond if activated. As such, MSTS has very reasonable but strict standby requirements for the response teams. + Standby requirements and considerations include: + Mechanics are required to be on standby as needed, usually 2-3 weeks at a time. Occasionally longer than 3 weeks depending on staffing. + Mechanics are paid $40 per day extra to be on standby. + Mechanics must be within 2 hours of your assigned base while on standby. + Mechanics on standby must have reliable cell phone reception. + Mechanics must remain fit to maintain the aircraft while on standby. + If called out, mechanics must be able to deploy for potentially several weeks straight. + Standby positions require an additional physical and various inoculations to maintain a deployable status. + Deployments for several weeks at a time are possible for both emergency response and non-emergency response missions. + Accomplish scheduled and unscheduled maintenance and servicing activities on US Department of Energy Aircraft (Beechcraft B-350 airplane, Bell-412/212 helicopter and/or Leonardo AW139,) operated by Mission Support and Test Services, LLC. + Assist technicians and maintenance personnel in the development, integration, installation and removal of standard mission equipment in aircraft. + Work with stockroom personnel to facilitate the timely requisitioning of all parts, materials and equipment needed to complete aircraft maintenance. + Maintain aircraft in accordance with latest revision of the manufacturer's instructions, applicable FAA Federal Aviation Regulations and Aviation Operations Manual. + Operate and maintain ground support equipment. + May conduct inspections on work in progress during aircraft maintenance activities, coordinates modifications and major repairs with the FAA, and provides input to aircraft maintenance procedures. + Responsible for compliance with airworthiness programs established by the airframe manufacturers. + Perform other work as assigned by Supervisor. **Qualifications** + Associate degree in field related to the position plus at least 5 years' progressive related experience or High School diploma plus 7 years' progressive related experience. + Possess an FAA Airframe and Powerplant (A&P) Certificate. + Be proficient at troubleshooting and diagnosing turbine powered airplane and helicopter airframe, engine, and electrical systems. Working knowledge of Federal Aviation Regulations Parts 91, 65, 43, and 21. + Effective oral, written, and electronic communication skills to include Microsoft Word, Excel, and electronic manufacturer's maintenance libraries. + Participate in the Deployment Authorization Program (DAP) and be able to travel and work nonstandard hours and deploy on domestic and overseas missions on short notice on company aircraft or vehicle. Capable of lifting and carrying up to 75 lbs. + Occasional overtime, weekend work, and travel may be required. + Beechcraft B-350 airplane, Bell-412/212 helicopter and/or Leonardo AW139, Pratt and Whitney PT6 Series Engine experience and FAA Inspection Authorization are desired. + The primary work location will be based at the Remote Sensing Laboratory at Nellis Air Force Base, Las Vegas, NV (RSL-N). + Flexible work schedule can be negotiated with the manager; employees can work 5/8's, 9/80's or 4/10's work-weeks. + Pre-placement physical examination, which includes a drug screen, is required. MSTS maintains a substance abuse policy that includes random drug testing. + Must possess a valid driver's license. MSTS is required by DOE directive to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants offered employment with MSTS are also subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. In addition, Applicants for employment must be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship, at least 18 years of age. Reference DOE Order 472.2 (**************************************************************************************** , "Personnel Security". If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. **Department of Energy Q Clearance** (position will be cleared to this level). Reviews and tests for the absence of any illegal drug as defined in 10 CFR Part 707.4 (*************************************************************************************************************** , "Workplace Substance Abuse Programs at DOE Sites," will be conducted. Applicant selected will be subject to a Federal background investigation, required to participate in subsequent reinvestigations, and must meet the eligibility requirements for access to classified matter. Successful completion of a counterintelligence evaluation, which may include a counterintelligence-scope polygraph examination, may also be required. Reference 10 CFR Part 709 (************************************************************************************ , "Counterintelligence Evaluation Program." MSTS is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, veteran status or other characteristics protected by law. MSTS is a background screening, drug-free workplace. Annual salary range for this position is: **$70,262.40 - $105,393.60.** Starting salary is determined based on the position market value, the individual candidate education and experience and internal equity.

The Plant Mechanic is responsible for safe repair and maintenance of mining equipment typically found in an aggregate facility including crushers, screen decks, conveyors, drums, etc. The Plant Mechanic is expected to complete pre-shift and post-shift equipment inspections, submit required daily documentation and assist in plant operations as needed. Benefits At CalPortland, we're proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That's why we give you a wide range of benefits to choose from. All regular full time employees may enroll in a variety of health and welfare plans including medical, dental and vision plans. Other benefits include life insurance, disability coverage, employee assistance program, and retirement program. The company also has a variety of voluntary benefits for employees to choose from. Responsibilities * Perform safety and mechanical inspections, diagnostics, and repairs on crushing plants, screens, conveyours, feeders, and support systems of the plant and equipment * Conduct preventative maintenance (PMs) including lubrication, fluid changes, screen replacements, belt adjustments, and component inspections * Replace bearings, rollers, pumps, motors, hoses, cylinders, and structural components as needed * Assist with plant rebuilds, relocations, and major shutdown maintenance * Complete detailed maintenance logs and work orders * Operate loaders, excavators, water trucks, haul trucks, skid steers, and other equipment as needed to support operations * Safely move materials, load stokepiles, and assist with plant cleanup and resets * Perform basic daily equipment checks before and after use * Communicate equipment needs and repair timelines with supervisor and operators * Collaborate with plant and mobile equipment teams to minimize downtime * Assist in training operations on equipment care and inspection practices * Address any housekeeping issues within the workspace; maintain a clean and organized work area * Drive to various facilities to perform maintenance and repair tasks; may also include periodic work at ready-mix plants * Troubleshoot and resolve maintenance problems to ensure minimum cost and prevent operational delays, to include but not limited to: hydraulic, mechanical, and pueumatice system issues * Understand and comply with MSHA rules and regulations; follow MSHA, company policies, and lockout/tagout procedures at all times * Identify and report safety hazards and/or equipment concerns immediately * Participate in safety meetings, inspections, and training programs * Other duties as assigned by manager Education High school diploma/GED Requirements/Qualifications * Must have a valid drivers license * 2-5+ years of experience as a plant mechanic, or similar role * Experience with crushinng equipment (impact, jaw, cone crushers) * Knowledge of conveyor alignment, belt tracking, and belt splicing * Strong mechanical and hydraulic troubleshooting skills * Welding, fabrication, or cutting torch experience preferred * Provide own tools typically used in aggregate facility maintenance * Physical requirements: able to lift or move up to 100 lbs., stand, walk, climb, bend, stretch, kneel, crouch, and drive on rough terrain * Able to work in wet and/or dry conditions and extreme heat and cold * Strong communication, problem solving and leadership skills * Able to work well with others in a fast-paced environment * Ability to work extended hours or variable shifts as needed * Knowledge and experience in the operation and maintenance of crushers, wash plants, conveyors, material washers and various other types of fixed equipment used in the industry * Experience operating heavy equipment (e.g. loaders, excavators, ADTs, dozers and water trucks) * Follow MSHA, company safety policies, and lockout/tagout procedures at all times * Current MSHA training certification preferred Conditions of Employment Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. Some positions require FMCSA regulated on-going drug and alcohol testing. Location:

West Star is the fastest growing maintenance repair organization in the industry and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. What you can expect as an Aircraft Maintenance Technician at West Star: Whether you are replacing or repairing parts, troubleshooting electrical/mechanical/hydraulic and pneumatic systems or performing inspections on some of the most sophisticated civilian aircraft in the world, no day is the same. What is the same, is that each day will bring new experiences and opportunities for growth. You will be ESSENTIAL to many FUNCTIONS including: Performing general mechanical tasks on aircraft and related systems. Removal and installation of panels and components, Troubleshooting and problem solving aircraft system/component issues De-fueling aircraft, Engine removal/installations, Operating ground support equipment, Inspection and evaluation of the aircraft and components Aircraft movement and assistance in performance runs/ taxiing Maintenance and repair of shop facility, equipment and tooling Immediately notify the Lead Mechanic of any problem areas such as parts, materials, workmanship, or airworthiness issues. Provides the Lead Mechanic with a detailed report of work progression and open items to be included in the shift turnover log Proper tagging of Aircraft components, parts, and panels appropriately stored including racks by aircraft. Basic computer skills to be able to navigate electronic training, manuals, and maintenance data bases Willing and able to work rotating shifts including, nights, holidays, weekends and days off. Effectively and clearly communicate (i.e., speak, write, read) in English Any other job-related duties as assigned by supervisor or management. What you'll need to bring with you: Your Education: A High school diploma or equivalent, and Airframe and Powerplant License are required. A valid driver's license approved for airline travel and/or a valid passport is ideal Your Initiative: We're looking for team players who are self-motivated and able to perform in a fast paced environment where working under specific deadlines and time constraints will be common. Your Sense of Responsibility: Attend work every day as scheduled to include overtime and weekend assignments. Notify supervisor in advance of shift starting if unable to work. Must have reliable transportation to get to work each and every day. Perform all work in accordance with Federal Aviation Administration guidelines. Follow all company and safety rules during performance of duties. Maintain customer oriented work habits.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. **Boeing Defense, Space and Security (BDS)** has an exciting opportunity for Flight Operations Mechanics to support the Phantom Works team in Las Vegas, NV! Flight encompasses all of the duties of the following job classifications: Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight. **This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.** **Position Responsibilities:** -Perform operational checkout of aircraft prior to and during preflight - Inspect explosive and armament installations - Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft - Inspect and/or perform bench and flight line operational checkout and inspect, troubleshooting, adjustment and repair of electrical and electronic systems - Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed - Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system - Fabricate, adjust, trouble shoot, repair and modify aircraft electrical systems. Perform operational checkout of hydraulic systems and mechanical systems - Diagnose and correct hydraulic and mechanical malfunctions. Operate engines during run-ups and troubleshoot when needed - Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engines - Install or replace reservoirs, etc. and repair leaks in same. Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators - Splice, route, clamp, solder, and string tie wires or wire bundles - Install and load ejection seats and guns. Install adjust, repair and replace structural parts and assemblies - Fabricate parts such as skins, doors, aircraft frames, air bags, test panels, clips, brackets, angles and ribs without the aid of jigs and fixtures - Modify aircraft components or aircraft support equipment - Perform composite repairs **Basic Qualifications (Required Skills/Experience):** + 5+ years of experience in electrical assembly installation + 5+years of experience in aircraft electrical modification to electrical wing and system components + 5+years of experience with military aircraft involving avionics and or electrical + Active Top Secret Clearance **Preferred Qualifications (Desired Skills/Experience):** + Experience fabricating, installing, routing, terminating, soldering, and repairing electrical wiring harnesses; or any variety of electrical components, and associated equipment **Drug Free Workplace:** Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies _._ **Additional Information:** + The selected candidate must be able to work any shift, as assigned. + This is an hourly position governed by the IAM Collective Bargaining agreement. + New Hires, as well as employees who transfer from non-union positions, may be required to attend some type of training upon their start. All new employees, rehires without seniority or transfers from outside of IAM 837 jurisdiction, shall be regarded as probationary during their first one hundred twenty (120) calendar days of employment. Continued employment is contingent upon successful completion of the probationary period. + This positions requires an Active Top Secret Clearance **Total Rewards:** At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $24.15/hourly - 37.15/hourly Applications for this position will be accepted until **Jan. 02, 2026** **Relocation** Relocation assistance is not a negotiable benefit for this position. **Security Clearance** This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) **Visa Sponsorship** Employer will not sponsor applicants for employment visa status. **Equal Opportunity Employer:** Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Minimum RequirementsCombination of Education and Experience will be considered. Must be authorized to work in the US as defined by the Immigration Act of 1986. Must pass a Criminal Background Check.Education: Bachelor's DegreeEducation Details: Bachelor's Degree from an accredited university in engineering, engineering sciences, aeronautics or related discipline Certification: YesCertification Details: Airframe & Powerplant certification, Pilot License or FCC License preferred Years of Experience: Minimum one (1) year airline related experience in aircraft interiors engineering. Visa Sponsorship Available: NoValid/Unexpired Passport Book: NoValid/Unexpired Driver's License: No Preferred Requirements•Knowledge of aircraft interior design.•Understand and ability to use LOPA and other engineering drawings.•Working knowledge of Aircraft and Component Maintenance Manuals.•Proficient in Microsoft Office to include Outlook, Word, and Excel.•Strong organizational skills.•Ability to multi task.•Good communication skills. Job Duties•Create and modify LOPA drawings.•Create and modify Engineering Orders as required to comply with regulatory requirements and company needs.•Review Airworthiness Directives, Service Bulletins and other source documents to determine applicability and provide accomplishment recommendations.•Develop solutions to in-service aircraft interior issues which may impact the flight schedule.•Coordinate engineering activities as needed with other internal Allegiant departments such as:##Materials/Purchasing##Maintenance Planning##Maintenance Control##Heavy Maintenance##Finance•Respond dynamically to the request from maintenance or any other airline department to resolve technical issues.•Serve as a Technical Expert for Interior items.•Coordinates with the FAA, OEM, or other airline departments to assist with implementation of engineering documents.•Assist with CASP analysis and development of reliability initiatives.•Other duties as assigned by the Manager•Knowledge of FAR regulations related to interiors, and other government requirements for passenger safety and accommodation.•Interior configuration and arrangement•Installation and modification of cabin/flight compartment furnishings.•Seats, lavatories and Galleys.•Ceilings, overhead stowage units, passenger service units.•Sidewall lining, insulation and panels.•Flooring covering, raceways and escape path lighting.•Doors and slides.•Emergency equipment.•Cargo systems.•Other duties as assigned. Physical RequirementsThe Physical Demands and Work Environment described here are a representative of those that must be met by a Team Member to successfully perform the essential functions of the role. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the role. Essential Services ProviderAllegiant as a national air carrier is deemed an essential service provider during declared national and state emergencies. Team Members will be required to report to their assigned trip or work location during national and state emergencies unless prohibited by local, state or federal order. EEO StatementWe welcome all individuals from varied backgrounds and experiences to apply. Our company values the unique perspectives and talents that each person brings to our team. Equal Opportunity Employer: Disability/VeteranFor more information, see ************************* $80,000 - $100,000 a year Full Time Benefits:Profit SharingMedical/Dental/Vision/Life/ Disability InsuranceMedical Travel ReimbursementLegal, Identity and Pet Insurance 401K with an employer match Employee Stock Purchase PlanEmployee Assistance ProgramFlight BenefitsPaid vacation, holidays, and sick time Part Time Benefits:Profit SharingMedical Travel ReimbursementLegal, Identity and Pet Insurance 401K with an employer match Employee Stock Purchase PlanEmployee Assistance ProgramFlight BenefitsSick time We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: Top SecretTRAVEL: Yes, 25% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Put your skills to the test by pushing the boundaries of what's possible. From global defense to sustainment and modernization to mission readiness, your experience and ability will make it a reality. Our programs are built on equal parts of curiosity and collaboration. Our combined effort means our customers can connect and defend millions of people around the world. With Northrop Grumman, you'll have the opportunity to be an essential part of projects that will define your career, now and in the future. Northrop Grumman Aeronautics Systems has an opening for a Deployable Aircraft Mechanic 4 for a rotational OCONUS program based in Palmdale, CA. You will be responsible for performing minor structural repairs and modifications. Troubleshoot, repair and service aircraft and engine systems. Conduct diagnosis of malfunctions. Perform maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems. All within accordance with technical specifications, engineering instructions, and FAA regulations. Fabricate, install and test installation, routing, clamping and wiring harnesses. Read wiring diagrams and blueprints. You may receive additional training and be cross utilized into aircraft low observable maintenance to fulfill the daily activities and duties required to meet contract requirements. Low Observable tasks include repair of composite or metallic structures, and sanding, stripping, testing, masking and other preparation tasks. Basic Qualifications: Must have a High School diploma or equivalent (GED) and 6 years of relevant experience in the Aviation and/or Aerospace industry. Must have an active DoD Top Secret (with a background investigation completed within the last 6 years or currently enrolled into Continuous Evaluation). Must have the ability to obtain and maintain Special Access Program (SAP) clearance within a reasonable period of time, as determined by business needs. This position requires the ability to perform moderate strenuous physical and repetitious work to include: bending, stooping, kneeling, carrying tools, lifting up to 50 pounds, working overhead, and accessing small, confined spaces Must be able to pass a physical/respiratory evaluation to obtain and maintain necessary respirator clearance and compliance with all respirator fitting requirements. Must be able to meet medical requirements for worldwide travel. Ability to obtain and maintain a valid U.S. passport. Willingness to accept customer furnished quarters for a period up to 180 days away from primary work location to support business needs. Willingness to work a flexible work schedule that may include extended shifts, holidays, and weekends and support on call status (24 hours-a-day, 7 days-a-week, 365 days a year), as required by business needs. Preferred Qualifications: Aviation and Aerospace Industry Operational experience. Primary Level Salary Range: $79,100.00 - $131,900.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Tactical Air Support Inc. Aircraft Mechanic Reno, Nevada Salary rate: $30.00 - $50.00/hourly DOE Tactical Air is currently seeking an Aircraft Mechanic to join our Maintenance team. This position will support Tactical Air's fleet of fighter aircraft with over 75 years of combined experience in tactical aviation maintenance and more than 30 years of military adversary contract maintenance. The Maintenance staff are a dedicated team comprised of experienced, A&P-certified, and tactical aircraft mechanics, technicians, and logisticians who all work towards ensuring safe and seamless ground maintenance operations. Responsibilities The ideal candidate for the Aircraft Mechanic position will be professional, highly productive, disciplined, team-oriented, technically astute, and responsive to the needs of the company, colleagues, and customers. This position will report to the Director of Maintenance and will perform organizational, intermediate, and limited depot-level maintenance to include inspection, operational test, repair, modification, and troubleshooting on all assigned aircraft, components, and equipment. This position will apply advanced technical knowledge to solve complex problems and to provide technical assistance, guidance, and instruction to other teammates as needed. Requirements * High School diploma/GED with at least 1 year of applicable work experience. * Current work experience in aircraft maintenance occupational field, preferably in the military or with a government aviation maintenance contractor. * Experience with high performance military aircraft (F-5/T-38). * A&P Certification, or ability to obtain certification. * Support Equipment Operator License (Tow Tractor, N2 Servicing Trailer, and Mobile Start Unit at a minimum). * Valid state driver's license. * U.S. Citizenship with the ability to obtain/maintain a government security clearance. Desired Experience/Skills * A&P certification. Physical Demands * Occasional lifting of up to 50 pounds (with assistance, if required). * Regular use of hands and fingers to handle, feel, or operate objects, tools, or controls; reaching with hands and arms. * Regularly ascend/descend stairs and/or ladders. Work Authorization * Must be lawfully eligible to work in the United States and complete a U.S. government I-9 Form. * Tactical Air Support is a Drug & Alcohol-Free Workplace. Pre-employment, random, or for cause drug/alcohol testing (including for marijuana) required. * Pre-employment and ongoing physical certifications required. * Occasional aircraft hangar or warehouse environment with exposure to loud noises, fumes from engines and chemicals, unpredictable climate (hot/cold), and electrical shock, or trip or slip hazards. * May be exposed to or required to handle hazardous materials. * Specific work hours determined by operational, departmental, or contractual requirements. * Occasional evening, weekend, holiday, and overtime work may be required. * Occasional travel to various work sites throughout the U.S. may be required. Tactical Air Support is an EEO/AA/Disabled/Veterans Employer I understand that if an offer of employment is made, I may be required to undergo investigation into all statements and references contained in this application. Said investigation may include credit, driving, criminal background, professional references, and other background checks. By applying for this position, I authorize post-offer investigation into my background as necessary and as a condition of employment. Note: a criminal conviction does not constitute an automatic bar to employment and will be considered only as it substantially relates to the position in question. California Only: You have a right to receive public records documenting an arrest, indictment, conviction, civil judicial action, tax lien, or outstanding judgment that are obtained without using the services of an investigative consumer reporting agency (CA Civil Code §1786.53). Pursuant to California law, you are entitled to waive this right.

TASK DESCRIPTION: Aircraft Mechanic I (23021): Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti- icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair. May be required to be licensed by Federal Aviation Administration. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Federal Aviation Administration (FAA) licensing of contractor employee technical proficiency is not required. TASK REQUIREMENTS: Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic, hydraulic, engines, auxiliary power unit, and ventilation and heating systems. Repair, replace, and rebuild aircraft structures, such as fuselage and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, rivet gun and drills. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Perform phase, scheduled, unscheduled, periodic, and other hourly or calendar inspections. Use chemical treatment process to etch and alodine parts. Use chemical sealants. Requisition repair parts, materials, and consumable supplies through military supply system ULLS-A (E). Lead and direct small maintenance teams. Perform other tasks as directed. PREFERRED QUALIFICATIONS: H-60 qualification and/or experience. Three to five years leadership experience. Eight or more years' rotary wing experience. Familiarity and ability to use Microsoft Office. Familiarity and ability to use military tech manuals. Familiarity and ability to use Standard Army Management Information Systems i.e. ULLS-A (E). BASIC QUALIFICATIONS: Must be a graduate of one of the following Military Aviation Powertrain and/or General Repair, Hydraulic, Engine, Avionics and Sheet Metal Qualification Courses or civilian equivalent. At least two years of experience on military rotorcraft. Must be able to work 1st, 2nd or 3rd shift schedule as required. Must be able to work flexible work-week schedules i.e. M-F, Tues-Sat, Sun-Th or as required. Must be able to pass a background check. Must be able to obtain a favorable National Agency Check. Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must have own tools. Must be able to deploy to support off station exercises and perform other support duties as assigned. Compensation $42.05/hour Other Compensation Employees receive a minimum health and welfare fringe rate of $3.75 or a Group Health Insurance Opt Out amount of $2.80 per hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, basic life insurance, and short term disability. Employees are able to enroll in KAI's 401k plan. Employees accrue 6.77 hours of PTO per bi-weekly pay period. KAI employees at ASF Los Alamitos have 13 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

* Maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and shears. This job requires working knowledge of technical publications and shall be required to make entries in aircraft logs and records. The incumbent receives technical guidance, as required, from supervisor or higher-level technician. Military experience a plus. Minimum Experience Requirements: * 3-5 years turbine powered UH-60 Blackhawk experience * Must have training on UH-60 PMI phase inspections * Must be able to follow engine and component overhaul manuals * Prefer two years of experience performing maintenance checks/multi-engine * FAA Airframe & Powerplant License Preferred * UH-60 Crew Chief Flight background Preferred * Recent CAN experience is a plus * Must be able to work indoors and outdoors. * Able to lift and carry at least 50 lbs * FAA Airframe and Powerplant License Preferred. * Class D Driver License * Must pass physical and Drug test * MUST be able to obtain a Secret Clearance * Must have own tools/toolbox Duty Hours M-TH or Tu-FRI 6:30-5:00 PM [ Off Monday or Friday] Benefits Available Employee & Family Health, Dental, and Vision Insurance Options $50,000/$100,000 Life/AD&D Insurance and 24/7 Teledoc Svcs Retirement Savings Plan (similar to a 401(k) Employee Assistance Program (EAP) Cash Equivalent Benefits Paid Federal Holidays Paid Sick Leave Paid Vacation Other benefits may include, but not be limited to: a variety of other Personal Leave days off, Uniform and PPE provisions, paid training, performance awards, and occasional meal, beverage, or snack accommodations. (Please Note: Not all benefits will apply, based on a variety of factors, i.e., opt out and plan provisions, etc.) LOGMET is an Affirmative Action and Equal Opportunity Employer: we welcome and encourage all individuals, including veterans and individuals with disabilities, to apply! If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact LOGMET's Human Resources Department Manager directly: *************, **************, Ext.4 We sincerely appreciate your consideration; please feel free to contact LOGMET's HR Department anytime, with any questions you may have.