Aircraft mechanic jobs near me

availability About Us: AAR's purpose is to empower people to build innovative aerospace solutions today so you can safely reach your destination tomorrow. The company's mission is to go above and beyond to provide value-driven aerospace aftermarket solutions to meet the evolving needs of our customers worldwide. AAR constantly searches for the right thing to do for its customers, employees, partners and for society. The Worldwide Aviation Support Services (WASS) program, an AAR business, headquartered in Rockledge, FL, provides global, world-class expeditionary and conventional aviation solutions to the US Department of State Air Wing.I-MZ1 Role Description: Perform a variety of complex operations in support of the aircraft. Maintain aircrafts and their associated engines and sub-systems to ensure scheduled and unscheduled maintenance is completed and aircraft airworthiness requirements are met. Key Responsibilities: Repair, replace, and rebuild aircraft structural components such as cowlings and functional components. Rigging, surface controls, and plumbing and hydraulic units. Inspects engines and associated components for airworthiness. Repair or replace defective engine components. Sit, stoop, bend, crawl, crouch, and climb aircraft to repair, replace, and rebuild aircraft structural components such as cowlings and functional components. Remove and install engines, props or rotor blades, transmissions, flight controls and other aircraft components. Read and interpret original equipment manufacturer and program maintenance manuals, service bulletins, and other related documentation to determine feasibility and method of altering or repairing the aircraft and its associated components. Determine the airworthiness of the aircraft and its associated components. Troubleshoot, repair, and replace electrical wiring and associated components. Perform progressive phase, periodic and other calendar/hourly inspections. Perform miscellaneous duties to service aircraft, including hydraulic system servicing, engine oil replenishment, aircraft systems lubrication, aircraft fueling, etc. Interacts with Company Production Control, the Customer and manufacturer in matters that concern the airworthiness of the aircraft, operational readiness of the aircraft and issues related to the troubleshooting of the aircraft system. Knowledge of U.S. Army Maintenance Documentation System, i.e.,738-751 DoS Pam Gen 1, 328-23. Required to complete maintenance documentation in compliance with all applicable program procedures. Required to make entries electronically through the program MIS. #LI-MZ1 Qualifications Required High School diploma or GED. Federal Aviation Administration issue Mechanic certificate with both Airframe and Powerplant ratings or acceptable Host Nation equivalency. Ability to communicate effectively with team members and various levels of leadership in both written and oral form. Ability to read and comprehend maintenance manuals and technical data in English. CMF 15 aviation MOS series or another military or commercial equivalent to the DHC-8. Minimum of eight (8) years prior experience maintaining specific assigned aircraft. 8 years direct experience in aircraft maintenance, civilian or military. Must have exercised the privilege of their Airframe and Powerplant License for a minimum of 6 months of the previous 24 months. Must have previous experience working phase or heavy maintenance on assigned aircraft: DHC-8 Experience with working from blueprint drawings, diagram, specifications, service manuals, sketches, templates, and other incomplete data. Ability to sit, stoop, bend, crawl, crouch, and climb to repair, replace, and rebuild aircraft. Ability to obtain and maintain d U.S. Security Clearance or MRPT. Preferred: Strong Electrical and Avionics background. Compensation and Benefits: Hourly Position. 40-hour work schedule. Comprehensive benefits package including medical, dental, and vision coverage. Generous paid time off program. 401(k) retirement plan with company match Professional development and career advancement opportunities AAR is committed to building a diverse and inclusive workforce. We encourage applications from people of all races, ethnic origins, religions, abilities, sexual orientations, gender identities, or expressions. We are dedicated to the health and safety of our people, our customers, and the communities where we live and work. AAR provides accommodation in accordance with applicable laws through all stages of the hiring process. If you require accommodation for any part of the application and/or hiring process, please advise Human Resources.Job: WASS MAINTENANCEPrimary Location: United States-Florida-HomesteadSchedule: Full-time Overtime Status: Non-exempt AAR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Category: Mx Mechanic Republic Airways is seeking Aircraft Maintenance Technicians to join our team at our Columbus, Ohio base. Elevate your career at Republic Airways with benefits including: * The most competitive benefits package across the industry, including 401K that begins vesting at 100% day one. * Company paid additional training opportunities. Examples include - E170/175 Engine Run & Taxi, RII, Borescope, GE Engine Training, E170/175 General Familiarization Course just to name a few. * Flight privileges across our three codeshare partnerships - American, Delta, and United And so much more! Keep reading to learn how you can live your best life at Republic. POSITION PURPOSE Performs preventive maintenance, repair, modifications and other maintenance of aircraft, components and related equipment in accordance with standards and regulations. ESSENTIAL DUTIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Performs preventive maintenance, repair, modifications and other maintenance of aircraft, components and related equipment and complies with 14 CFR, manufactures specifications, the GMM, Company policy and procedures as well as other methods accepted by the FAA and OSHA when accomplishing maintenance. * Performs maintenance mechanic duties in all areas inside and outside the hangar as well as at the airport terminal. * Troubleshoots all aircraft systems. Executes maintenance work orders. * Uses tools, equipment and test apparatus necessary to assure completion of the work in accordance with accepted industry practices. Verifies that all calibrated tooling is current on its calibration before use. Verifies materials and parts used are of a serviceable condition. * Verifies that each part or component is effective for the aircraft on which it will be installed. * Adheres to material handling and control procedures specified in GMM and by the equipment manufacturers. Initiates material requests. * Evaluates the area and equipment that will be utilized to ensure that safety is not compromised before performing any maintenance action. Applies safety first at all times. * Maintains a clean, safe working environment throughout the work shift. * Updates Supervisor on progress of work performed. Reviews paperwork at the end of shift to ensure that all work accomplished is signed for prior to departing the maintenance facility. Assists with completion of shift turnover reports in accordance with procedures in the GMM. * Completes all department internal company forms, maintenance records, documents, work orders, etc. including performing maintenance computer system transactions as required (MEL, DMI). * Provides coaching and on-the-job training as directed. * Adheres to established work schedule. Participates in shift meetings and briefings as required. * Submits in writing any suggested changes in operational procedures that will enhance safety and cost effective aircraft maintenance. * Accesses Company Intranet to become familiar with and utilize the GMM and aircraft manuals. Ensures part effectivity is correct per aircraft. * Adheres to recurrent training, including required FAA AMT training, and keeps necessary licenses and certification up-to-date. * Reads and acknowledges understanding of maintenance newsletters and Company Emails on a timely basis. * Performs other duties as assigned or required. REQUIRED KNOWLEDGE, SKILLS AND ABILITIES The requirements listed below are representative of the knowledge, skill, and/or ability necessary to perform this job. EDUCATION and/or EXPERIENCE. * High school diploma or equivalent with an FAA Airframe and Powerplant license. PREFERRED EDUCATION and/or EXPERIENCE Previous experience as an A&P mechanic or airline experience. Experience using a computer to look up information and input data. OTHER REQUIREMENTS * Possess a stable employment history. * Must have and maintain a valid Driver's License and a clean driving record. * Must possess the required tools. * Able to work both in a team setting and individually. REGULATORY * Able to pass an FAA required 10 year work history review and pass criminal background and fingerprint checks. * Willing to submit to and pass FAA and Company mandated random drug and alcohol tests. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively and be understood before groups of associates of the organization. REASONING/PROBLEM SOLVING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several variables in standardized situations. DECISION MAKING Possess decision making skills. Makes limited decisions and determines best methods to solve problems by referring to established precedents and policies. Impact of decisions is moderately low. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * Able to stand, walk, use hands to finger, handle and feel, reach with hands and arms at least 90% of the time. * Able to climb or balance, stoop, kneel, crouch and crawl up to 60% of the time. * Able to lift up to 50 pounds at least 35% of the time. * Able to lift or move 75 pounds over 70% of the time. * Must be able to see to perform work and to see approaching vehicles, aircraft and machinery. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Work near moving mechanical parts, work with fumes or airborne particles over 90% of the time. * Work in high, precarious places up to 50% of the time. * Work around toxic or caustic chemicals up to 30% of the time. * Withstand risk of electric shock and work with explosives up to 10% of the time. * Work in outdoor weather conditions inside and outside an open air hangar as well as the airport terminal up to 100% of the time. * The work environment can be very loud. * Able to wear a respirator and protective equipment for testing and regular duties. This includes minimal facial hair in order to ensure proper fit in of respirator in accordance with OSHA regulations. * Able to work nights, evenings, weekends and holidays to support 24 hour operations. TRAVEL REQUIREMENTS Able to travel up to 20% of the time, including overnight stays. Equal Opportunity Employer, Disability and Veteran Accommodations All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

The C-26 Metroliner Army Transport Aircraft Mechanic AM-1 (FAA A&P). Performs organizational and intermediate level maintenance on C-26 Metroliner aircraft. (Level of Mechanic is based on years of specific C-26 hands-on A&P mechanic experience). An (FAA) A&P Certificate is Required. US Citizenship is Required to obtain the US Govt Secret Security Clearance and base access for this work site. Hands on C-26 Metroliner experience is strongly preferred, (details are below in Minimum Requirements). Is responsible for servicing, troubleshooting, repairing and modifying aircraft systems to ensure continued airworthiness. These tasks are performed on avionics & electrical systems, engines, flight controls and airframe components. Repairs are performed using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. Comply with aircraft records procedures outlined in DA PAM 738-751. Ensure aircraft discrepancies are properly recorded in accordance with approved maintenance procedures and within the terms of the contract. Know and understand the functions and requirements of computerized maintenance software. Perform aircraft recovery missions as necessary. Perform engine run or taxi operations. Meet requirement to obtain certification within 12 months of employment. Reads and interprets manufacturers' maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Minimum Requirements High School diploma or equivalent is Required. A valid (FAA) A&P Certificate is Required. Union CBA Site, provides 3 levels of A&P experience, based on specific years of experience on the MDS aircraft assigned, C-26 Metroliner. AM-1 Requires - Two (2) Years A&P experience is required, with two (2) or more years of specific C-26 being preferred. AM-2 Requires - Five (5) years of C-26 hands-on A&P aircraft mechanic experience is required. AM-3 Requires - Ten (10) years of A&P mechanic experience, and Thirteen (13) years of C-26 specific aircraft experience required. A valid Driver's License is required. Mechanic Tools are Required; Mechanics must provide their own Tools and Toolbox. Toolbox must be shadowed, each tool to be etched with mechanic PID. Must be willing and able to work and/or rotate for a multiple shift operation. Security Clearance Requirements: Ability to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is Required to obtain a Secret Clearance, and for facility credentials and authorization to work at this facility. FAA A&P AR95-20 Medical Requirements: Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years. Physical and Additional Qualifications: Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Stand, squat, sit, walk, work with arms overhead for extended periods of time. Pull, push, lift up to 50 lbs. Comply with the FAA regulations as applicable. Know, understand and comply with the requirements outlined in the contract performance work statement (PWS). May be required to work and/or rotate for a multiple shift operation. Possesses a valid FAA Aircraft & Powerplant (A&P) license and shows compliance with FAR 65.83, recent experience requirements. Must be able to speak, read, write and understand English. Reliable, self-motivated, and able to deal with stressful situations and timelines while maintaining professional and non-confrontational attitude. Compensation & Benefits HIRING HOURLY Rate of Pay: $41.52 - 49.54 (Hourly rate set by [CBA / SCA]) This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: please visit our careers site: ********************** Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

PURPOSE OF THE JOB We are seeking a strategic and results-driven Commercial Mechanical Fiberglas Leader to lead a high-growth business unit with a revenue scope of $120M. This role will oversee the Regional Sales Leaders for East and West, and the Core Thermals operations team, with a strong focus on channel strategy, service excellence, key account management, and contractor engagement. Reports to: GM, Mechanical & Air Distribution Travel: Remote based (preference to Eastern or Central time zones) Willingness to travel - upto 60% Span of Control: Leads a team of RSLs, KAM, Mechanical Contractor, and Core Thermals Operations KEY RESPONSIBILITIES Strategic Leadership & Business Management for Mechanical Fiberglas: * Own the strategy for the $120M business, ensuring financial targets are met or exceeded. Monitor key performance indicators and adjust strategies to ensure sustained success. * Develop and execute a comprehensive business strategy to drive growth, profitability, and market leadership across the Mechanical Fiberglas portfolio. * Align cross-functional teams including sales, product management, and service operations to deliver on business objectives. Sales & Market Development: * Lead Regional Sales Leaders to expand market share, strengthen customer relationships, and achieve revenue targets * Drive commercial strategy and execution for the business * Ensure one voice to the customer and market Key Account Management & Mechanical Contractor Strategy: * Develop and lead the mechanical contractor engagement strategy to strengthen partnerships, drive specification, and increase pull-through demand. * Collaborate with sales and marketing teams to enhance contractor programs and value propositions. * Own and manage relationships with strategic accounts, ensuring alignment on major project specifications and long-term partnership goals. * Act as the primary point of contact for key customers, driving satisfaction, loyalty, and growth. * Collaborate with internal teams to ensure timely product availability and execution for contractor pull-through opportunities. * Regularly review account performance, identify growth opportunities, and lead joint business planning sessions. Leading and developing a highly engaged team * Lead, coach, and develop a cross-functional team focused on customer experience, supply chain, and key account management. * Foster a culture of accountability, collaboration, and continuous improvement. * Set clear goals, provide regular feedback, and support professional development. * Align team performance with company KPIs and strategic objectives. JOB REQUIREMENTS MINIMUM QUALIFICATIONS & EXPERIENCE: * Bachelor's degree in Engineering, Business, or related field; MBA preferred. * 10+ years of progressive leadership experience in industrial manufacturing, building materials, or related sectors. * Proven track record of managing large-scale business units and driving growth. * Strong commercial acumen and channel strategy expertise. * Exceptional leadership, communication, and stakeholder management skills. #RF-1 #Remote

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.

Full-time Description AirNet II is a renowned aviation leader and part of the Kalitta family of companies, specializing in scheduled and on-demand cargo charter services. The position will be based in Columbus, OH (LCK). Operating a fleet of Beechcraft Barons and Bombardier Learjets, AirNet II is a premier provider of industries that require immediate turn-time and specialized handling. Job Summary: AirNet II A&P Mechanics will insures inspections, servicing, repairs and maintenance are performed in accordance with the appropriate aircraft maintenance manual, company policies and procedures, and the Repair Station manual. Functions/Responsibility: Preflight and post flight checks for the aircraft Discrepancy repair on the aircraft Safely work in a shop environment using tools and equipment as necessary Complete assigned tasks outdoors and in inclement weather if required Insure that work performed gets inspected by the appropriate aircraft inspection personnel Complete required documentation for work performed Inspect, troubleshoot, adjust and repair aircraft and/or engines as assigned Complete required training as assigned Maintain a clean and organized work environment Use basic computer skills to complete and document tasks Work productively individually or with an assigned crew Works with integrity and desire to maintain a high quality standard Report failures or deficiencies immediately Pass background check and random DOT drug testing Overtime and/or weekend work may be required Requirements Education Requirements: Candidates must have a High School Diploma or GED Qualifications, Certificates, Licenses & Document Requirements: A valid Unrestricted Driver's License A&P License Experience & Professional Skill: Minimum 3 years of maintenance experience preferred Experience with Baron, Falcons, and Learjet 30 series, preferred Work Environment & Culture Skills: Basic MS Office knowledge, computer software & internet proficiency Candidate must be able to understand, read and write English Candidate must pass DOT/FAA pre-employment drug screen and a DOT/FAA compliant background check Candidate should be motivated, resourceful, energetic, organized, and able to manage and be managed Candidate must be reliable, punctual and flexible Candidate must be able to multi-task, respect and maintain confidentiality Candidate must be ethical, trustworthy with sensitive information Candidate must be service oriented and able to work at a fast pace and handle stress and problematic issues well with a good attitude Candidate must be able to communicate effectively and work within a team-focused environment Candidate must be respectful of diverse populations and cultures Candidate must have an outgoing personality with expertise at developing relationships Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are regularly required to, stand, sit, talk, hear, and use hands and fingers to operate a computer and telephone keyboard Light to moderate lifting is required Must be able to climb and use a ladder, work stands, platforms and lift equipment Work within a confined workspace(s) Location Requirements: Operation based in Columbus, OH at Rickenbacker International (LCK) There is no ability to work from home There will be no relocation package for this position Other Requirements: Must have jet experience Must be at least 18 years of age Must be legally authorized to work in the United States Schedule: Day Shift 5 Days, 8 hours days Benefits: Employer Provided: Short Term Employee Assistance Program (EAP) Basic Life Insurance with Accidental Death & Dismemberment Insurance Travel Assistance Program Fidelity 401K with starting at match Employee Elective: BCBS - Medical 500 PPO and 1000 PPO options, Dental PPO, Prescription starting after 60 days EyeMed - Vision Flexible Spending Account - Medical and Dependent Care Long Term Disability Life Insurance for Employee, Spouse, and Child Accident and Critical Illness Insurance for Employee, Spouse, and Child Hospital Indemnity for Employee, Spouse, and Child Met Law Coverage Nationwide Voluntary Pet Insurance

AirNet II is a renowned aviation leader and part of the Kalitta family of companies, specializing in scheduled and on-demand cargo charter services. The position will be based in Columbus, OH (LCK). Operating a fleet of Beechcraft Barons and Bombardier Learjets, AirNet II is a premier provider of industries that require immediate turn-time and specialized handling. Job Summary: AirNet II A&P Mechanics will insures inspections, servicing, repairs and maintenance are performed in accordance with the appropriate aircraft maintenance manual, company policies and procedures, and the Repair Station manual. Functions/Responsibility: Preflight and post flight checks for the aircraft Discrepancy repair on the aircraft Safely work in a shop environment using tools and equipment as necessary Complete assigned tasks outdoors and in inclement weather if required Insure that work performed gets inspected by the appropriate aircraft inspection personnel Complete required documentation for work performed Inspect, troubleshoot, adjust and repair aircraft and/or engines as assigned Complete required training as assigned Maintain a clean and organized work environment Use basic computer skills to complete and document tasks Work productively individually or with an assigned crew Works with integrity and desire to maintain a high quality standard Report failures or deficiencies immediately Pass background check and random DOT drug testing Overtime and/or weekend work may be required Requirements Education Requirements: Candidates must have a High School Diploma or GED Qualifications, Certificates, Licenses & Document Requirements: A valid Unrestricted Driver's License A&P License Experience & Professional Skill: Minimum 3 years of maintenance experience preferred Experience with Baron, Falcons, and Learjet 30 series, preferred Work Environment & Culture Skills: Basic MS Office knowledge, computer software & internet proficiency Candidate must be able to understand, read and write English Candidate must pass DOT/FAA pre-employment drug screen and a DOT/FAA compliant background check Candidate should be motivated, resourceful, energetic, organized, and able to manage and be managed Candidate must be reliable, punctual and flexible Candidate must be able to multi-task, respect and maintain confidentiality Candidate must be ethical, trustworthy with sensitive information Candidate must be service oriented and able to work at a fast pace and handle stress and problematic issues well with a good attitude Candidate must be able to communicate effectively and work within a team-focused environment Candidate must be respectful of diverse populations and cultures Candidate must have an outgoing personality with expertise at developing relationships Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are regularly required to, stand, sit, talk, hear, and use hands and fingers to operate a computer and telephone keyboard Light to moderate lifting is required Must be able to climb and use a ladder, work stands, platforms and lift equipment Work within a confined workspace(s) Location Requirements: Operation based in Columbus, OH at Rickenbacker International (LCK) There is no ability to work from home There will be no relocation package for this position Other Requirements: Must have jet experience Must be at least 18 years of age Must be legally authorized to work in the United States Schedule: Day Shift 5 Days, 8 hours days Benefits: Employer Provided: Short Term Employee Assistance Program (EAP) Basic Life Insurance with Accidental Death & Dismemberment Insurance Travel Assistance Program Fidelity 401K with starting at match Employee Elective: BCBS - Medical 500 PPO and 1000 PPO options, Dental PPO, Prescription starting after 60 days EyeMed - Vision Flexible Spending Account - Medical and Dependent Care Long Term Disability Life Insurance for Employee, Spouse, and Child Accident and Critical Illness Insurance for Employee, Spouse, and Child Hospital Indemnity for Employee, Spouse, and Child Met Law Coverage Nationwide Voluntary Pet Insurance

Submissions must include: Resume Cover Letter RTR Certifications (if applicable) if they have aircraft certification (below) If the candidate is submitted above 26.11 and does not have the certification, they will be rejected. The position is weighted more towards Maintaining a fuel Farm and refueling aircraft. And then there's the maintaining of ground support equipment Motorized tug's etc. Airframe & Powerplant (A&P) licensed by the Federal Aviation Administration to work on aircraft in the United States for automotive technician UPDATE: Please feel free to submit candidates who have NO aircraft experience but have Automotive Tech Experience. Position is a mix between an Aircraft Maintenance Tech and an Aircraft Attendant. Will do some duties of both (see both descriptions below) Hiring manager believes that an Automotive Technician would also perform well in the role. Performs aircraft & engine inspections, makes repairs & alterations to aircraft, performs maintenance in compliance with aviation regulations, performs operational checks in accordance with FAA (i.e., Federal Aviation Administration) regulations (e.g., performs engine diagnosis & operational checks), &/or inspects work for compliance with FAA regulations & certifies airworthiness of aircraft components. Operates & maintains sophisticated technical aircraft precision testing, calibration, measuring, charging & balancing equipment & uses specialized machine tooling & hand tools. Operates & maintains tugs, gas trucks & related ground support equipment (e.g., assists in refueling operations & grounds handling of aircraft; assists in grounds care & snow removal; repairs & makes alterations to equipment). Prepares & maintains various work related documentation (e.g., maintains records regarding work performed such as maintenance & equipment reports, orders needed parts, maintains service manuals, files & logbooks) & performs work related miscellaneous tasks (e.g., researches aircraft records, status reports, service bulletins, airworthiness directives & flight schedules). Operates fuel truck to service aircraft & maintains service & other related records (e.g., fuel & oil intake records, daily accounting records & sales to other state agencies). Operates aircraft ground towing equipment (e.g., tug, tractor) for ground movement of aircraft (i.e., in & out of hangar & service areas) & operates heating & auxiliary power units for external & internal ground starting of aircraft engines. Services & performs minor maintenance on ground support equipment (e.g., snow removal, fire apparatus); assists mechanic in minor aircraft maintenance & performs work related miscellaneous tasks (e.g., cleans aircraft interior & exterior; removes snow; assists mechanic in aircraft inspection; monitors tools). VIP Supreme Staffing LLC is an EEO Employer - M/F/Disability/Protected Veteran Status View all jobs at this company

Monday - Friday, 7:00 am - 3:30 pm $36 - $38 per hour WORK AIRSIDE. THINK GROUND LEVEL. PERFORM SKY HIGH - BECOME A LEAD GSE TECHNICIAN TODAY The Lead GSE Technician oversees the maintenance and repair of ground support equipment, performs advanced diagnostics, mentors technicians, and coordinates daily tasks while ensuring operational efficiency across airport support functions. WHAT IT'S LIKE TO WORK AS A LEAD GSE TECHNICIAN Oversee and coordinate daily operations of the GSE maintenance team Diagnose complex equipment issues and guide troubleshooting and repair efforts Ensure compliance with safety regulations and maintenance standards for all equipment Provide technical mentorship and performance feedback to technicians Manage parts inventory and coordinate with other departments for operational support Exemplify PrimeFlight customer service and safety standards Perform any additional duties as assigned by management WHY WORK FOR PRIMEFLIGHT? Enjoy benefits like 401(k) with matching, health, dental, vision, and life insurance, paid time off, growth opportunities, and more (*part-time benefits may vary) We are committed to being a leading provider of commercial services within the aviation industry Our teams focus on maintaining a positive working environment and treating all team members with respect With more than 200 locations across the world, we offer opportunities for career progression Enjoy a competitive pay scale QUALIFICATIONS 18 years of age or older Eligible to work in the United States 2 years of proven experience in ground support equipment maintenance and repair, with a track record in a leadership or supervisory role Strong technical knowledge of mechanical, electrical, and hydraulic systems Excellent problem-solving, organizational, and leadership skills Ability to train and mentor staff in equipment maintenance and repair techniques Must have a valid state-issued driver's license with an acceptable driving record Communicate effectively in English (reading, writing, speaking) Ability to access and interpret information in print and electronically, including the use of electronic devices including IPads/Tablets, Computers, and Mobile Devices Effectively communicate with colleagues and clients, both in-person and through electronic means Pass a background check and drug screen Eligibility to acquire needed credentials and clearances (FAA, TSA, Port Authority, U.S. Customs and U.S. Postal- as applicable) Airlines are 24/7, so we need our team members to be flexible to work various shifts including nights, weekends and holidays To perform this job successfully, an individual must be able to perform each essential requirement satisfactorily. The requirements listed above are representative of the work environment, knowledge, skill, and/or ability. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential requirements. PHYSICAL ACTIVITY/WORKING CONDITIONS MAY INCLUDE: Ability to lift up to 70 pounds Prolonged standing and walking in an indoor/outdoor environment as applicable Must be able to reach with arms and grasp with hands Must be able to push, pull Must be able to crawl and crouch, at times, in confined tight spaces Must be able to bend, stretch, squat, kneel Must be able to climb and work at elevated heights Exposure to moderate and at times high noise levels Exposure to Biohazards and/or Chemicals Exposure to outdoor elements Be able to hear and respond to the spoken voice and to audible alarms Tasks may involve repetitive motions of the arms, wrists, hands and/or fingers Specific vision abilities required for this job include: Close vision (clear vision at 20 inches or less); distance vision (clear vision at 20 feet or more); peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point); depth perception (three-dimensional vision, ability to judge distances and spatial relationships); ability to adjust focus (ability to adjust the eye to bring an object into sharp focus) The pay rate listed on this post is what the company reasonably expects to pay for this position. However, individual compensation may vary based on factors including qualifications, skills, competencies, education, and experience. PrimeFlight Aviation Services, Inc. is proud to be an equal-opportunity employer. All applicants and employees are considered and evaluated for positions at PrimeFlight Aviation Service, Inc. without regard to race, ethnicity, religion, color, sex, gender, gender identity or expression, sexual orientation, national origin, ancestry, uniform service member and veteran status, marital status, pregnancy, age, protected medical condition, genetic information, disability, or any other protected status in accordance with all applicable federal, state/province, and local laws.

Job DescriptionSalary: DOE J. Benton Construction - Caribbean Construction Experts is more than a construction company. We're a team of builders that nurtures the needs of our clients while giving back to the Virgin Islands community where we live and work. Our goal is to be seen as one of the leading companies in the Caribbean by providing our clients with an unrelenting focus on customer service. We accomplish this by striving for excellence through continuous improvement and successfully completing projects without sacrificing quality. The project experience is just as significant to our team as the final product. We are proud to call the U.S. Virgin Islands our home. Since 2019, J. Benton has been in a strategic partnership with Consigli Construction Co., Inc., one of the Northeasts top general contractors, allowing both companies to leverage their shared experience, complementary strengths and resources for a best-in-class approach to wide variety of projects. The Lead Mechanic is a senior-level technician responsible for diagnosing, repairing, and maintaining a fleet of passenger vehicles and heavy construction equipment. This position not only performs advanced mechanical work but also provides leadership and technical oversight to junior staff. The Lead Mechanic helps coordinate daily workflow, manages service schedules, ensures safety and quality compliance, and plays a key role in mobile service operations. This role is essential in supporting the reliability and efficiency of the organizations fleet operations. RESPONSIBILITIES Responsibilities include, but are not limited to: Lead diagnostic and repair activities on fleet vehicles and heavy equipment. Perform advanced diagnostics and oversee complex repairs. Assist in assigning and coordinating work orders among mechanics and helpers. Ensure adherence to safety protocols and quality standards during all maintenance tasks. Provide training, mentorship, and oversight to junior staff and mechanic helpers. Operate and supervise deployment of the Mobile Service Truck, taking the lead on job site repairs. Maintain and manage shop and mobile inventory, including tools, parts, and consumables. Monitor and schedule preventive maintenance services across fleet assets. Liaise with vendors and suppliers for parts procurement as needed. Communicate equipment status and service needs to department heads or supervisors. Maintain accurate documentation of repairs, inspections, and service logs. Assist in any related areas as assigned by Warehouse Manager or Superintendents SAFETY REQUIRMENTS Wear appropriate PPE at all times. Operate tools, machinery, and diagnostic equipment according to manufacturer specifications and safety guidelines. Inspect and maintain tools and equipment regularly to ensure they are in safe working condition. Secure vehicles and equipment prior to inspection or repair (e.g., use of jack stands, wheel chocks). Follow safe lifting procedures for heavy parts and equipment. Maintain clean and organized work areas free of hazards. Follow all traffic and environmental safety protocols when working at off-site locations. Use appropriate signage or barriers when working in public or shared spaces. Properly store, handle, and dispose of fuels, lubricants, batteries, and other hazardous materials in accordance with OSHA and EPA regulations. Understand and follow Safety Data Sheets (SDS) for all chemicals used. REQUIRED EDUCATION AND EXPERIENCE High School diploma or equivalent. Technical diploma or trade certification in Automotive or Heavy Equipment Technology preferred. 510 years of hands-on experience in vehicle and heavy equipment maintenance. Valid drivers license and clean driving record required. CDL preferred (particularly for transporting or operating heavy equipment). Leadership or supervisory training is a plus. Strong communication and organizational skills. Advanced diagnostics across vehicle and equipment systems. Working experience performing preventive maintenance scheduling and execution. Team leadership and workflow coordination. Safety and compliance auditing. System overhauls, hydraulics, pneumatics, and electrical troubleshooting. Proficiency in documentation and service recordkeeping. Ability to travel frequently between islands with occasional overnight stay. Ability to work overtime, holidays and weekends as needed. An Affirmative Action / Equal Opportunity Employer J. Benton Construction provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Posting End Date 12-07-2025 Please note the job posting will close on the day before the posting end date Assist in performing work involved with the installation, rearrangement, maintenance, operation, removal, and inspection of electrical transmission and distribution facilities; drive and operate line trucks and associated auxiliary equipment. All job duties apply to overhead and underground equipment and facilities. Job Description Line Mechanic D: What You'll Do: Assist with the assembly, installation, maintenance, removal and competently inspect underground facilities, conductors, fixtures, structures and other associated equipment on de-energized and grounded overhead and underground facilities under direct or immediate supervision. Demonstrate the ability to competently perform ground person duties under immediate or direct supervision as skill level dictates. Assist with loading, unloading, handling, maintaining, installing and removing poles, towers and structures. After completion of D-100, or equivalent experience, the employee must demonstrate the ability to operate Company equipment (with exception of digger/derricks and aerial lift vehicles), climb poles, ladders and structures, and work on de-energized conductors and equipment. Also, may work on conductors and equipment energized up to 260 volts under direct supervision. After completion of D-200, or equivalent experience, operate digger/derrick and aerial devices, under immediate supervision as skill level dictates. Also, under immediate supervision of a higher classification, may work on conductors and equipment energized up to 260 volts. Assemble and install Line Material and hardware under direct or immediate supervision Use and store hand lines, tie knots and demonstrate a basic working knowledge with ropes and rigging equipment inspection and use. Splice primary and secondary overhead wires using the proper tools, hardware and equipment (including crimping and compression tools). After completion of D-200, or equivalent experience, under direct supervision, the employee may operate cutouts, line switches, reclosers, and other sectionalizing devices, refuse line and transformer devices. During this time frame, the employee may progress from direct supervision to immediate and finally general supervision as skill level dictates. After completion of D-300, or equivalent experience, test de-energized overhead lines and equipment install and remove personal protective grounds under immediate supervision. Inspect and maintain tools, equipment and work area in a safe, clean and orderly fashion. Identify, inspect, use and maintain all classes of rubber gloves and sleeves (PIPE), and insulating blankets, hoses and covers (IPE). Inspect, maintain, organize, operate and stock company vehicles, equipment and tools. Perform housekeeping duties as assigned. Report irregularities and abnormal conditions. Safely execute pole top rescue and bucket truck rescue processes as training is completed5. Protect or control work area. Set and remove barricades, flags, signs, cones and associated equipment. Maintain accurate records and submit accurate reports as required. Correctly read and record information and registered readings on analog or digital Kilowatt-hour meters. Complete Monthly Apprentice Cards and submit to local supervision for review. Perform similar or less skilled work as assigned. The following reference is provided as a guideline for persons responsible for directing the duties and responsibilities of assigned personnel, to assist in the safety and development of employees, and is not intended to limit assignment of work or the degree of supervision under all operating conditions: DIRECT SUPERVISION - When a qualified person is working with hands-on with the person performing the designated task. IMMEDIATE SUPERVISION - When a qualified person is near the structure/equipment and is in constant visual and/or verbal contact to the person performing the designated task. GENERAL SUPERVISION - An employee of higher classification, knowledgeable of the task at hand and not necessarily at the job site. QUALIFIED PERSON - Line Mechanic or Supervisor who is knowledgeable of the task or work to be performed and is capable of performing the appropriate emergency rescue. What We're Looking For: Education: High school diploma or GED Experience: No experience required. Line work experience or line school education is preferred. Licenses/Certifications: Must possess and maintain a valid state driver's license. Employee shall obtain appropriate licensing as required by federal and/or state law prior to the end of the designated probationary period. Must acquire CDL beginners permit within 60 days. Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Line Mechanic A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company. Must acquire within such time frame as determined by the Company, the qualifications necessary to perform the duties of the next higher classification in the line of progression or vacate the current job classification. This job requires "recommended" test results from HireVue Line Worker Virtual Job Tryout. This assessment is completed online, is untimed, and typically takes about 45 minutes to complete. Please refer to the Employment Test Prep section of our website ************************************* A physical abilities assessment is also required for this position. Drive Time Requirement: Successful candidate must live or be willing to relocate within 45 miles of the Columbus NE Service Center (4909 Westerville Rd. Columbus, Ohio 43231) What You'll Get: Line Mechanic D: $27.21- $28.61 In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees. The power of AEP comes from our valued team of unique employees….the best in the business! We're proud to be one of the largest electric energy companies in the U.S., powering over 5 million homes and businesses, spanning across 11 states. We're passionate about making an innovative difference in the communities we serve. We're powering the future - today! Are you a skilled and motivated Line Mechanic D seeking a new opportunity in the Columbus, OH vicinity? Join our team where you'll make an impact while contributing to the development and implementation of the systems and infrastructure needed to efficiently deliver energy services to our valued customers. #AEPOH Compensation Data Compensation Grade: U025-180 Compensation Range: $27.21 - $27.91 The Physical Demand Level for this job is: H - Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or greater than negligible up to 10-20 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Medium Work. Hear about it first! Get job alerts by email. Log in to your Candidate Home Account today! If you don't have an account, you can create one. It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

Join the NetJets Team NetJets, the global private aviation leader for more than 60 years, provides the pinnacle of private travel, defined by a signature commitment to unwavering safety, personalized service, and reliable global access. Discover why NetJets is the ultimate career destination, offering exceptional benefits and growth opportunities. Purpose of Position The work of an Aircraft Maintenance Technician shall consist of all work generally recognized as Aircraft Maintenance TechnicianÂs work performed by or on behalf of the Company in or about its domestic maintenance bases, shops and maintenance stations, including but not limited to wing walking, checks, dismantling, overhauling, repairing, replacing, assembling and erecting all parts of aircraft, aircraft engines, instruments, electrical systems, heating systems, hydraulic systems and machine tool work in connection therewith. Aircraft Maintenance Technicians must hold such valid licenses as are required by the Federal Aviation Regulations to fulfill their duties as Aircraft Technicians. Tasks and Responsibilities * The work of an Aircraft Maintenance Technician shall consist of all work generally recognized as Aircraft Maintenance Technician's work performed by or on behalf of the Company in or about its domestic maintenance bases, shops and maintenance stations, including but not limited to wing walking, checks, dismantling, overhauling, repairing, replacing, assembling and erecting all parts of aircraft, aircraft engines, instruments, electrical systems, heating systems, hydraulic systems and machine tool work in connection therewith * Aircraft Maintenance Technicians must hold such valid licenses as are required by the Federal Aviation Regulations to fulfill their duties as Airline Technicians * Lead Aircraft Maintenance Technicians must be capable of performing inspection work assigned to their crews. Note: It is not possible to list all required job duties on this form. There may be other important duties assigned, depending on the position. For a list of essential job functions, please refer to the essential functions document for this job. Education High School Certifications and Licenses FAA Airframe & Powerplant (A&P) Years of Experience 0-2 years of experience Core Competencies Adaptability Collaboration Strives for Positive Results Service-Oriented Curiosity Knowledge, Skills, Abilities and Other (KSAOs) * Ability to read, write, understand, and speak fluently in English. * Ability to qualify for required security clearances, access permits, and badges * Ability to meet the physical demands of the job * Valid driver's license * Airframe and Power Plant (A and P) Mechanic Certificate * 2 years' experience exercising A and P certificate, Bachelor's Degree in Aviation Maintenance Technology or equivalent from an FAA-accredited program, or two years of experience as an Aircraft Maintenance Technician and successful completion of a trade test; provided, an employee who qualifies through service as an Aircraft Maintenance Technician and trade testing shall be subject to a 180 day competency review period instead of a 90 day competency review period How NetJets Supports You NetJets is proud to provide a variety of attractive benefits to our employees, including many at no cost. Employees have access to no cost options including Medical, Dental, and Vision benefits, with access to robust networks of nationwide providers. NetJets offers benefits so you can LIVEWELL-a comprehensive package to support your Mind, Body, and Life. Our comprehensive suite of benefits include: * Medical, Dental, and Vision * Healthcare Advocacy * Employee Assistance Program * Flexible Spending Accounts * Health Savings Account with annual employer contribution * Wellness Programs & Discounts * Paid Time Off * Life and Accident Insurance * Voluntary benefits (financial protection plans) * 401(k) plan, with 66% of every dollar you contribute matched by NetJets * Short and Long-Term Disability * Legal Plan * Identity Theft Protection Plans * Pet Insurance * Family & Caregiving Support Nearest Major Market: Columbus

Headquartered in Dublin, Ohio, Cardinal Health, Inc. (NYSE: CAH) is a distributor of pharmaceuticals, a global manufacturer and distributor of medical and laboratory products, and a provider of performance and data solutions for healthcare facilities. Departing from Columbus, Ohio, our Part 91 Aviation department aircraft currently includes a Falcon 2000LXS and Embraer Praetor 500. Aircraft Maintenance is responsible for servicing, inspecting, repairing, and managing the overall quality assurance program for the corporate aircraft and associated equipment in accordance with FAA regulations, manufacturer requirements, and IS-BAO standards as defined in the Company Flight Operations Manual and Standard Operating Procedures. Additional tasks may include, but are not limited to, receiving and shipping of aircraft parts, minor building maintenance, maintaining facility entryways, minor landscaping, and purchasing and/or replenishment of aircraft stock. Responsibilities Accurately completes all required Aircraft maintenance records and other aircraft documentation such as Airworthiness Directives and Service Bulletins. Performs routine inspections and troubleshooting as well as Aircraft Pre- and Post-Flight Inspections Works with Director of Aircraft Maintenance and Scheduler to ensure daily coverage of all scheduled flight activities including launching and recovering trips and passenger assistance. Actively use your knowledgeable of department FOM and IS-BAO procedures as well as all company policies. When necessary, supervise and assist outside Maintenance contractors for specialized aircraft maintenance activities. Maintains the Company Aircraft interior and exterior to a best-in-class standard. Works on complex problems that require independent action and a high degree of initiative to resolve issues. Adheres to all Cardinal Health policies and guidelines. Other duties as assigned. Qualifications Valid FAA Airframe and Powerplant license. High School Diploma or GED and 4+ years of related experience preferred. Previous experience with Dassault Falcon and/or Embraer Praetor strongly preferred. IS-BAO experience preferred. Strong attention to detail-critical eye for data accuracy - strong documentation skills. Must possess strong computer and troubleshooting skills as well as solid reading, writing, math skills. Strong interpersonal, verbal and written communication skills; able to communicate effectively and interact with personnel at various levels of expertise. Demonstrated ability to work in a fast-paced, collaborative environment. Must be open-minded, decisive, and flexible. Must be very well organized, detail oriented and possess ability to multi-task. Must have ability to plan to ensure timely completion of assigned tasks and prioritize workload. Able to work in confined spaces. Ability to be flexible with a rotating schedule to include nights, weekends, and some holidays. Be proactive and willing to take initiative and responsibility. Must have a high level of personal integrity. Anticipated salary range: $85,000 - $130,000 Bonus eligible: No Benefits: Cardinal Health offers a wide variety of benefits and programs to support health and well-being. Medical, dental and vision coverage Paid time off plan Health savings account (HSA) 401k savings plan Access to wages before pay day with my FlexPay Flexible spending accounts (FSAs) Short- and long-term disability coverage Work-Life resources Paid parental leave Healthy lifestyle programs Application window anticipated to close: 10/17/2025 *if interested in opportunity, please submit application as soon as possible. Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply. Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law. To read and review this privacy notice click here

Heritage Cooperative is always looking for friendly, outgoing, customer-service driven employees. Our people are our greatest asset, and we are constantly thinking outside of the box for new ways to make working at Heritage Cooperative attractive to our current and prospective employees. If this sounds like you, apply today and join the team! ESSENTIAL JOB FUNCTIONS Serve as a positive representation of Heritage Cooperative's Core Values Provide Superior Customer Service Highest Standards of Integrity and Trust Continuous Improvement Being a Good Partner Abide by all safety regulations to ensure safety of oneself, coworkers and customers Determine vehicle condition by conducting inspections and diagnostic tests. Perform routine maintenance checks and adjustments on fluid levels, hoses, belts, brakes, tires, and clutches. Keep equipment available for use by completing preventive maintenance schedules, installing component and part upgrades, controlling corrosion, and completing winterization procedures. Correct any vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, or hydraulics. Verify vehicle performance by conducting test drives and determining whether to adjust controls and systems. Comply with federal and state vehicle requirements by testing engine, safety, and combustion control standards. Maintain vehicle records by documenting services and repairs. Keep shop equipment operating by following operating instructions, troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and calling for repairs. Keep supplies ready by inventorying stock, placing orders, and verifying receipt. Other duties as assigned PREFERRED QUALIFICATIONS High School Diploma or Equivalent 5 years' experience in mechanical field Mechanical Aptitude which includes, but not limited to: Diagnosing mechanical problems and performing repairs; Electrical systems, including computerized induction/ignition systems; welding; use of power and hand tools and diagnostic equipment Valid driver's license, with acceptable driving record Class A CDL or Class B CDL (N) Tanker Endorsement (H) Hazardous Materials Endorsement DOT Medical Certificate WHY HERITAGE? Competitive Pay 401k match after 6 months Medical, Dental, and Vision Benefits Company paid Life/AD&D, Short-Term and Long-Term Disability Farm Bureau Membership Paid Holidays, Sick, and Vacation Time If you see yourself as a future Mechanic with Heritage Cooperative, apply TODAY by visiting ************************************ DISCLAIMER The job description is not intended to cover or describe all tasks, duties and responsibilities the employee may be required to be asked to perform. Heritage Cooperative retains the right to change or add new tasks, duties and responsibilities at any time, with or without notice to the employee. WORK AUTHORIZATION Evidence of work authorization upon employment is required in compliance with the Immigration Reform and Control Act of 1986. Completion of USCIS form I-9 will be required in order to verify employment eligibility within 3 business days of the first day of employment. AAP/EEO STATEMENT Heritage Cooperative provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Heritage Cooperative complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Heritage Cooperative expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Heritage Cooperative's employees to perform their job duties may result in discipline up to and including termination. #INDSP

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic II (Avionics/Electrician) th MXG) Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. ADDITIONAL QUALIFICATIONS/EXPERIENCE REQUIREMENTS: Aircraft Mechanic II (Avionics/Electrician): Electrical Experience: Minimum of six years total experience in aircraft maintenance as an aircraft avionics/electrician with one year on F-15 aircraft. The Contractor shall have the skill to remove and replace aircraft parts and accessories/components and the skill to make adjustments and settings according to established specifications. The Contractor shall also have the skill to identify and isolate integrated systems malfunctions and analyze performance and operate integrated avionics systems to determine operational condition per operational checks. Experience using specialized tools required for military aviation electrical connector assembly/disassembly and other associated electrical terminating devices is required. Aircraft modification and operational checks experience required. Contractor must have experience in electrical harness fabrication and braiding. Electrical Knowledge: The Contractor shall have the ability to follow and accomplish tasks in accordance with existing published technical data. The Contractor shall have the ability to read and interpret engineering drawings and specifications required to accomplish maintenance tasks and modifications. Knowledge is mandatory of electrical, electronic, microelectronic, mechanical and indicator principles theory, and application relating to electrical systems; concepts and application of maintenance directives; meaning of symbols used in wiring diagrams, blueprints, and schematics; using and interpreting testing and measuring devices; and proper handling, use, and disposal of hazardous waste and materials. Education: High school diploma, or equivalent, with successful completion of related military or commercial courses. Courses in basic electronics, mathematics, general science, physics, and mechanics are desirable. Other: Normal color vision as defined in AFI 48-123, Medical Examinations and Standards is mandatory for this specialty. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: May occasionally perform duties as Team Lead Scheduled and unscheduled maintenance Maintenance Control planning and management Aircraft maintenance action documentation via logs, records, forms, and electronic means Support Equipment (SE) operation and inspections Aircraft inspections Troubleshooting General aircraft maintenance Technical Directive compliance and modifications Tool Control Program Tool issue/receipt supporting aircraft maintenance shops including hazardous materials, tool room/box/pouch configuration Maintain Aircraft, Engines, and SE Logbooks Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Requisition repair parts, materials, and consumable supplies through military supply system. Perform other tasks as directed. Preferred Qualifications: Eight or more years' experience in aircraft maintenance Three or more years' experience on F-15 aircraft Advanced Corrosion Control Course Basic Qualifications: Six years' Aviation Maintenance experience One year's experience on F-15 aircraft Must be able to work shift schedules as required per Performance Work Statement (PWS) Must be able work work-week schedules i.e. M-F, Sn-Th or as required per PWS Basic Corrosion Control Course. Must be able to work flexible work-week schedules as required Must be able to pass a background check Must have at a minimum an interim SECRET security clearance Must be eligible for Common Access Card (CAC) Must be eligible for Restricted Area Badge Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must be able to travel to support off station Temporary Duty (TDY) as required Compensation $39.58/hour Other Compensation Employees will receive a minimum health and welfare fringe benefit of $2.65 for every hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees have a minimum of eleven paid holidays. After completing one year of service, employees will have two weeks paid vacation. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

**Monday - Friday, 7:00 am - 3:30 pm** **$36 - $38 per hour** **WORK AIRSIDE. THINK GROUND LEVEL. PERFORM SKY HIGH - BECOME A LEAD GSE TECHNICIAN TODAY** The Lead GSE Technician oversees the maintenance and repair of ground support equipment, performs advanced diagnostics, mentors technicians, and coordinates daily tasks while ensuring operational efficiency across airport support functions. **WHAT IT'S LIKE TO WORK AS A LEAD GSE TECHNICIAN** + Oversee and coordinate daily operations of the GSE maintenance team + Diagnose complex equipment issues and guide troubleshooting and repair efforts + Ensure compliance with safety regulations and maintenance standards for all equipment + Provide technical mentorship and performance feedback to technicians + Manage parts inventory and coordinate with other departments for operational support + Exemplify PrimeFlight customer service and safety standards + Perform any additional duties as assigned by management **WHY WORK FOR PRIMEFLIGHT?** + Enjoy benefits like 401(k) with matching, health, dental, vision, and life insurance, paid time off, growth opportunities, and more (*part-time benefits may vary) + We are committed to being a leading provider of commercial services within the aviation industry + Our teams focus on maintaining a positive working environment and treating all team members with respect + With more than 200 locations across the world, we offer opportunities for career progression + Enjoy a competitive pay scale **QUALIFICATIONS** + 18 years of age or older + Eligible to work in the United States + 2 years of proven experience in ground support equipment maintenance and repair, with a track record in a leadership or supervisory role + Strong technical knowledge of mechanical, electrical, and hydraulic systems + Excellent problem-solving, organizational, and leadership skills + Ability to train and mentor staff in equipment maintenance and repair techniques + Must have a valid state-issued driver's license with an acceptable driving record + Communicate effectively in English (reading, writing, speaking) + Ability to access and interpret information in print and electronically, including the use of electronic devices including IPads/Tablets, Computers, and Mobile Devices + Effectively communicate with colleagues and clients, both in-person and through electronic means + Pass a background check and drug screen + Eligibility to acquire needed credentials and clearances (FAA, TSA, Port Authority, U.S. Customs and U.S. Postal- as applicable) + Airlines are 24/7, so we need our team members to be flexible to work various shifts including nights, weekends and holidays To perform this job successfully, an individual must be able to perform each essential requirement satisfactorily. The requirements listed above are representative of the work environment, knowledge, skill, and/or ability. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential requirements. **PHYSICAL ACTIVITY/WORKING CONDITIONS MAY INCLUDE:** + Ability to lift up to 70 pounds + Prolonged standing and walking in an indoor/outdoor environment as applicable + Must be able to reach with arms and grasp with hands + Must be able to push, pull + Must be able to crawl and crouch, at times, in confined tight spaces + Must be able to bend, stretch, squat, kneel + Must be able to climb and work at elevated heights + Exposure to moderate and at times high noise levels + Exposure to Biohazards and/or Chemicals + Exposure to outdoor elements + Be able to hear and respond to the spoken voice and to audible alarms + Tasks may involve repetitive motions of the arms, wrists, hands and/or fingers + Specific vision abilities required for this job include: Close vision (clear vision at 20 inches or less); distance vision (clear vision at 20 feet or more); peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point); depth perception (three-dimensional vision, ability to judge distances and spatial relationships); ability to adjust focus (ability to adjust the eye to bring an object into sharp focus) The pay rate listed on this post is what the company reasonably expects to pay for this position. However, individual compensation may vary based on factors including qualifications, skills, competencies, education, and experience. PrimeFlight Aviation Services, Inc. is proud to be an equal-opportunity employer. All applicants and employees are considered and evaluated for positions at PrimeFlight Aviation Service, Inc. without regard to race, ethnicity, religion, color, sex, gender, gender identity or expression, sexual orientation, national origin, ancestry, uniform service member and veteran status, marital status, pregnancy, age, protected medical condition, genetic information, disability, or any other protected status in accordance with all applicable federal, state/province, and local laws. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Cardinal Health is actively seeking a highly motivated, customer-orientated A&P Lead Mechanic to join our team focused on safety, service, and operations. The Lead Aircraft Maintenance Technician is responsible for overseeing and performing aircraft maintenance, inspection, repair, and alteration tasks. This role requires strong technical knowledge, troubleshooting abilities, and a commitment to quality, safety, and regulatory compliance. The Lead AMT works closely with the Maintenance Director and other departments to ensure timely and accurate project execution. Departing from Columbus, Ohio, our Part 91 Aviation department aircraft currently include a Falcon 2000LXS and Embraer Praetor 500. Responsibilities * Accurately completes all required Aircraft maintenance records and other aircraft documentation such as Airworthiness Directives and Service Bulletins. * Performs routine inspections and troubleshooting as well as Aircraft Pre- and Post-Flight Inspections * Works with Director of Aircraft Maintenance and Scheduler to ensure daily coverage of all scheduled flight activities including launching and recovering trips and passenger assistance. * Actively uses knowledgeable of department FOM and IS-BAO procedures as well as all company policies. * When necessary, supervise and assist outside Maintenance contractors for specialized aircraft maintenance activities. * Maintains the Company Aircraft interior and exterior to a best-in-class standard. * Works on complex problems that require independent action and a high degree of initiative to resolve issues. * Adheres to all Cardinal Health policies and guidelines. * Other duties as assigned. Based on background you could qualify for lead or senior. Qualifications * Valid FAA Airframe and Powerplant (A&P) license. * High School Diploma or GED and 3+ years of related experience preferred. * Previous experience with Dassault Falcon and/or Embraer Praetor strongly preferred. * IS-BAO experience preferred. * Strong attention to detail-critical eye for data accuracy - strong documentation skills. * Be proactive and willing to take initiative and responsibility. * Must possess strong computer and troubleshooting skills as well as solid reading, writing, math skills. * Strong interpersonal, verbal and written communication skills; able to communicate effectively and interact with personnel at various levels of expertise. * Demonstrated ability to work in a fast-paced, collaborative environment. * Must be open-minded, decisive, and flexible. * Must be very well organized, detail oriented and possess ability to multi-task. * Must have ability to plan to ensure timely completion of assigned tasks and prioritize workload. * Able to work in confined spaces. * Ability to be flexible with a rotating schedule * Must have a high level of personal integrity. Anticipated salary range: $85,000 - $130,000 Benefits: Cardinal Health offers a wide variety of benefits and programs to support health and well-being. Benefits start on day one. * Medical, dental and vision coverage * Paid time off plan * Health savings account (HSA) * 401k savings plan match * Access to wages before pay day with my FlexPay * Flexible spending accounts (FSAs) * Short- and long-term disability coverage * Work-Life resources * Paid parental leave * Healthy lifestyle programs Application window anticipated to close: 12/5/2025 *if interested in opportunity, please submit application as soon as possible. Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply. Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.

Heritage Cooperative is always looking for friendly, outgoing, customer-service driven employees. Our people are our greatest asset, and we are constantly thinking outside of the box for new ways to make working at Heritage Cooperative attractive to our current and prospective employees. If this sounds like you, apply today and join the team! ESSENTIAL JOB FUNCTIONS Serve as a positive representation of Heritage Cooperative's Core Values * Provide Superior Customer Service * Highest Standards of Integrity and Trust * Continuous Improvement * Being a Good Partner Abide by all safety regulations to ensure safety of oneself, coworkers and customers Determine vehicle condition by conducting inspections and diagnostic tests. Perform routine maintenance checks and adjustments on fluid levels, hoses, belts, brakes, tires, and clutches. Keep equipment available for use by completing preventive maintenance schedules, installing component and part upgrades, controlling corrosion, and completing winterization procedures. Correct any vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, or hydraulics. Verify vehicle performance by conducting test drives and determining whether to adjust controls and systems. Comply with federal and state vehicle requirements by testing engine, safety, and combustion control standards. Maintain vehicle records by documenting services and repairs. Keep shop equipment operating by following operating instructions, troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and calling for repairs. Keep supplies ready by inventorying stock, placing orders, and verifying receipt. Other duties as assigned PREFERRED QUALIFICATIONS High School Diploma or Equivalent 5 years' experience in mechanical field Mechanical Aptitude which includes, but not limited to: Diagnosing mechanical problems and performing repairs; Electrical systems, including computerized induction/ignition systems; welding; use of power and hand tools and diagnostic equipment Valid driver's license, with acceptable driving record Class A CDL or Class B CDL (N) Tanker Endorsement (H) Hazardous Materials Endorsement DOT Medical Certificate WHY HERITAGE? Competitive Pay 401k match after 6 months Medical, Dental, and Vision Benefits Company paid Life/AD&D, Short-Term and Long-Term Disability Farm Bureau Membership Paid Holidays, Sick, and Vacation Time If you see yourself as a future Mechanic with Heritage Cooperative, apply TODAY by visiting ************************************ DISCLAIMER The job description is not intended to cover or describe all tasks, duties and responsibilities the employee may be required to be asked to perform. Heritage Cooperative retains the right to change or add new tasks, duties and responsibilities at any time, with or without notice to the employee. WORK AUTHORIZATION Evidence of work authorization upon employment is required in compliance with the Immigration Reform and Control Act of 1986. Completion of USCIS form I-9 will be required in order to verify employment eligibility within 3 business days of the first day of employment. AAP/EEO STATEMENT Heritage Cooperative provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Heritage Cooperative complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Heritage Cooperative expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Heritage Cooperative's employees to perform their job duties may result in discipline up to and including termination. #INDSP

Cardinal Health is actively seeking a highly motivated, customer-orientated A&P Lead Mechanic to join our team focused on safety, service, and operations. The Lead Aircraft Maintenance Technician is responsible for overseeing and performing aircraft maintenance, inspection, repair, and alteration tasks. This role requires strong technical knowledge, troubleshooting abilities, and a commitment to quality, safety, and regulatory compliance. The Lead AMT works closely with the Maintenance Director and other departments to ensure timely and accurate project execution. Departing from Columbus, Ohio, our Part 91 Aviation department aircraft currently include a Falcon 2000LXS and Embraer Praetor 500. **_Responsibilities_** + Accurately completes all required Aircraft maintenance records and other aircraft documentation such as Airworthiness Directives and Service Bulletins. + Performs routine inspections and troubleshooting as well as Aircraft Pre- and Post-Flight Inspections + Works with Director of Aircraft Maintenance and Scheduler to ensure daily coverage of all scheduled flight activities including launching and recovering trips and passenger assistance. + Actively uses knowledgeable of department FOM and IS-BAO procedures as well as all company policies. + When necessary, supervise and assist outside Maintenance contractors for specialized aircraft maintenance activities. + Maintains the Company Aircraft interior and exterior to a best-in-class standard. + Works on complex problems that require independent action and a high degree of initiative to resolve issues. + Adheres to all Cardinal Health policies and guidelines. + Other duties as assigned. Based on background you could qualify for lead or senior. **_Qualifications_** + Valid FAA Airframe and Powerplant (A&P) license. + High School Diploma or GED and 3+ years of related experience preferred. + Previous experience with Dassault Falcon and/or Embraer Praetor strongly preferred. + IS-BAO experience preferred. + Strong attention to detail-critical eye for data accuracy - strong documentation skills. + Be proactive and willing to take initiative and responsibility. + Must possess strong computer and troubleshooting skills as well as solid reading, writing, math skills. + Strong interpersonal, verbal and written communication skills; able to communicate effectively and interact with personnel at various levels of expertise. + Demonstrated ability to work in a fast-paced, collaborative environment. + Must be open-minded, decisive, and flexible. + Must be very well organized, detail oriented and possess ability to multi-task. + Must have ability to plan to ensure timely completion of assigned tasks and prioritize workload. + Able to work in confined spaces. + Ability to be flexible with a rotating schedule + Must have a high level of personal integrity. **Anticipated salary range:** $85,000 - $130,000 **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. Benefits start on day one. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan match + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 12/5/2025 *if interested in opportunity, please submit application as soon as possible. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************