Aircraft mechanic jobs in Kingsport, TN

Job Status/Type: Full time Level II Shift/ Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs. Performs inspections, maintenance, troubleshooting, repair, and annual rehabilitation of a variety of different amusement rides and attractions, depending on level of employee. Areas of responsibility include (but are not limited to) maintenance of gearboxes, chains, sprockets, hydraulic systems, pneumatic systems, wire rope, hoists, brakes, pumps, and large bearings. Climbing and working safely at height is an essential part of this job. Benefits: 3 weeks paid vacation (6 sick days, 8 paid holidays) Several medical coverage options to fit your needs best 401K match Maintenance-specific scholarships available FREE entry to ALL our parks and water parks! Perks: Yearly maintenance appreciation week celebration Complimentary tickets for friends and family Discounts on food and park merchandise Full-time and part-time employee events and gatherings Responsibilities: Job responsibilities include but are not limited to: Performs daily, weekly, monthly, annual, and other required inspections of amusement rides and related equipment as assigned, taking corrective actions as issues are identified. Inspections are visual as well as auditory. Trouble shoots a variety of mechanical, pneumatic, hydraulic, and electrical systems and takes appropriate corrective actions. Properly follows all repair procedures and maintains accurate documentation of all repairs. Maintains orderly and accurate records of all required inspections and work performed and submits required paperwork to supervision in a timely manner. Communicates the status of assigned rides both verbally and in written format. Maintains all assigned equipment in a safe and ready condition according to all applicable codes, laws, rules, company policies, and best practices. Reads, understands, and applies information from manufacturer's manuals for service, repair and or component replacement. Accurately reads blueprints (mechanical, pneumatic, and hydraulic). Completes proper documentation as required. Interacts with and communicates with various groups and individuals, such as the immediate supervisor, other Park managers and staff, co-workers, guests, vendors, contractors, inspectors, etc. Provides guest service according to Six Flags standards when serving the guest, including initiating guest interactions, answering questions, and giving directions. Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Six Flags safety guidelines and requirements and reports all unsafe or unusual conditions to supervisor. Meets scheduling availability requirements, including nights, weekends and holiday periods to meet business needs. Meets Six Flag's attendance requirements as outlined in Six Flag's attendance policies. Adheres to Six Flag's code of conduct including costuming and grooming standards as outlined in employees' Guidelines and other park/division specific policies and procedures. Performs other duties as assigned. Qualifications: Knowledge, Skills & Abilities: Strong knowledge of control processors, components, and communication networks used in real-time industrial applications. Strong proficiency in developing and reading one-line diagrams, and technical documents. Proficient at maintaining various rides and attractions. Good judgment, decision making and problem-solving skills. Effective verbal and written communication skills. Education: High school diploma or equivalent. License or Certification: Must meet location-specific requirements to work on specific rides and attractions. State or provincial certifications and/or licensing within if applicable in state. Valid driver's license. Welding certification preferred. Experience: Typically requires 4-6 years mechanical maintenance experience, including at least 2 years working on rides. Equivalency: Directly related experience or a combination of directly related education and experience and/or competencies may be considered in place of the above requirements.

Job Title: Packaging Mechanic Overview: The Packaging Mechanic plays a crucial role in ensuring smooth operations by performing setups and maintenance tasks on assigned production lines. This position requires in-depth knowledge of each component in a bottle packaging line, the correct setup, connection between components, and efficient completion of changeovers. The ideal candidate can operate multiple machines simultaneously and perform maintenance on various equipment within the bottle packaging area, including bottle unscramblers, tablet counters, cappers, labelers, and case packers. Key Responsibilities Perform moderate to complex adjustments, maintenance, and repairs on packaging and pneumatic equipment. Conduct machine changeovers, troubleshoot mechanical and basic electrical systems, and make appropriate repairs. Execute daily preventative maintenance on packaging equipment, conveyors, compressors, and assist with equipment installations. Complete work orders for machinery repairs, interpret equipment manuals, diagnose issues, replace or repair parts, test, and adjust equipment. Utilize hand and power tools, electric meters, and material handling equipment in daily tasks. Set up full line configurations independently, identifying and reporting any faulty operations or defective materials. Ensure compliance with company policies, cGMPs, ethical practices, and SOPs, completing documentation such as operation logs and batch records accurately. Perform quality inspections during operations, adhering to product quality standards, and execute all required sampling and testing. Train and guide Packaging Operators in safe and effective machine operation, including breakdown and sanitation tasks. Adhere to proper gowning and hygiene as per SOPs and cGMPs, promoting a safe work environment by following all safety protocols. Support other mechanical or maintenance needs as required and maintain regular, punctual attendance with flexibility for extended hours and occasional weekend overtime. Additional Responsibilities Perform additional job-related tasks as assigned by management. Requirements Education and Experience: High school diploma or GED equivalent. Minimum of 2 years of experience in mechanical maintenance of bottle packaging lines, including troubleshooting, repairs, setup, and disassembly. 2+ years of experience in nutraceutical, supplement, food, or pharmaceutical manufacturing in a maintenance mechanic role for bottle packaging lines. Knowledge, Skills, And Abilities Ability to work effectively in a team environment, read and interpret blueprints, schematics, manuals, and work orders. Proficient in using measuring equipment like micrometers, calipers, scales, and Volt/Ohm Meters. Familiarity with cGMP and OSHA standards; strong mechanical aptitude for machine repair and troubleshooting. Basic English reading and writing skills, with PLC knowledge being an added advantage. General proficiency with PCs. This role requires a mechanically inclined individual capable of ensuring optimal operation of packaging machinery while maintaining the highest standards of product quality and safety. Send us an email to *********************** and tell me why you're interested.

Are you ready to take flight in a dynamic and fast-paced aviation industry? As a global leader in aviation services, Swissport provides Ground Handling, Cargo Handling, and Passenger Services to over 300 million passengers annually. Our mission is simple - "To provide the aviation industry with consistent and tailor-made solutions around the globe, for a better customer experience." We believe that our people are what differentiates us from our competition. At Swissport, we are driven by our core values of Show You Care, Do the Right Things and Win as a Team, and we are currently seeking dedicated individuals, who align with these values, to join our team at various locations across the globe. Job Summary Fleet Mechanic is responsible for service and maintenance, keeping in good order all Ground Service Equipment at a designated station, keeping Swissport Ramp and other service agencies safe with reliable equipment that meets all local and governing laws. The expected pay rate is $28 - 43/hr. Full-time employees are offered a range of health and wellness benefits as well as 401(k) with company match paid vacation time, sick time, and company paid holidays. Your activities Operate and drive all types of GSE equipment - motorized and non-motorized. Perform and show competence in preventive maintenance per established schedules on all ground support equipment Provide trouble-shooting and diagnostic assessment of ground support equipment as required Hydraulic knowledge or basics necessary. Must be willing to learn hydraulic systems Airport deicing training will be required. Reporting to work during snow, Ice and cold weather required. Overtime is necessary during weather emergencies Will be working outside in all weather conditions year-round Remove malfunctioning ground support equipment from service and ensure GSE is not returned to service until malfunction has been accurately diagnosed and repaired Respond to emergency service calls as well as accidents involving ground support equipment Complete all maintenance/repair documentation consistent with carrier, station, airport authority, municipal, state, federal and SP requirements Comply with all federal, provincial, municipal, airport authority and carrier security requirements Will retain a motor vehicle driver's license for both air side / non airside in good standing at all times Follow all safety guidelines set out by WCB, EPA, WHIMIS, and SP management Keep GSE shop and its equipment always clean and serviceable, report all deficiencies to management Fuel equipment as necessary with full regard for all safety and environmental requirements Will liaison with Ramp management, customers and staff in a professional manner when needed Work as a self-starter and report to shop leads daily Your profile Valid driver's license Trade school training and or a mechanical background preferred. Good oral and verbal communication skills Good computer skills. Willing to clean and maintain a safe workshop. Willing to travel when necessary for training or to assist other SP stations with GSE needs as required What we offer 401(k) Dental insurance Health insurance Life insurance Paid time off Retirement plan Tuition reimbursement Vision insurance At Swissport, we believe in diversity, equal opportunity, and the power of our values to drive our success. We are committed to providing a workplace that fosters inclusion and where all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Visit our website at to learn more about Life at Swissport. Join Swissport today and be part of a team that connects the world of aviation!

Let your career take off with PSA Airlines About PSA PSA Airlines, a wholly owned subsidiary of American Airlines, offers unparalleled opportunities for growth and professional development. We value teamwork, diversity, and inclusivity and strive to create a safe, respectful, and happy work environment for our more than 4,000 employees. Our company culture, known as The PSA Way, is our foundation for operation and fosters stability, growth and a focus on the future while always placing safety at the forefront of everything we do. We are driven in our goals and achievements, eager to be better. We are reliable to one another and accountable for our actions. And we are caring in our daily interactions, with teammates, colleagues, and customers. Join our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. Benefits PSA offers the benefits you expect from a company focused on excellence. All eligible team members enjoy a comprehensive benefits package, including: * Travel privileges on the American Airlines global network * A generous vacation plan designed to let you enjoy your travel perks * 401(k) with company match * American Airlines Group (AAG) profit-sharing and bonus opportunities * A choice of three health plan options, all with nationwide coverage with the UnitedHealthcare Choice Plus network * Premium dental coverage * Vision plan options provided, including a plan that covers both glasses and contacts every year * Benefits navigation services, including finding a doctor, scheduling an appointment, understanding your medical bills, and free second opinion services * Access to 24-hour virtual urgent care services * Family planning and fertility treatment * LGBTQ+ friendly services including gender affirming care, assistance finding knowledgeable providers, and family planning * Company-paid Life and AD&D Insurance, Short-term and Long-term Disability, and supplemental life insurance options for spouses and dependent children * Flexible Spending Accounts for both Health Care and Dependent Care services * Comprehensive Employee Assistance Program providing a range of services, including 5 free in-person sessions with a health care professional Responsibilities Position Summary As the Airframe and Powerplant (A&P) Technician, you will impact PSA Airlines' business growth by conducting aviation repairs and services that allow for operations to be on time. By executing maintenance procedures in compliance with Federal Aviation Regulations and company standards, you are ensuring safe and reliable flights. Job Responsibilities * Will perform tasks necessary to comply with Federal Aviation Regulations and accept the responsibility for work performed by themselves and/or in conjunction with others and sign for same on the Company's approved forms. * Keep work areas clean. Return all equipment and tools to assigned areas. A&P Technicians will report all inoperative or faulty equipment to the Maintenance Supervisor or Lead Mechanic in charge. * Work will consist of and include any and all phases of repair and maintenance of aircraft with the aid of the employee's own tools, specialty tools provided by the Company, the use of test equipment, and Company-supplied technical manuals. * In certain cases, and A&P Technician may be authorized to perform required inspection items and assist in Company training programs. * Will at the commencement of each repair or inspection initiate the proper documentation. Parts tags will include a complete description of the discrepancy on all removed parts. Determine if the work to be performed is a Required Inspection Item. * Verifying, through proper documentation, that any part installed on any aircraft or component is approved for that aircraft or component and has been visually inspected and is free of damage or contamination. * Assure that hangar workshops and other areas assigned are maintained in an orderly manner. * Responsible for the Company's Security and Safety Management System (SMS) and associated Safety Risk Management and Safety Assurance outputs. * Perform other duties as assigned by the Maintenance Supervisor through the Lead Mechanic. Position Specifics Qualifications Required * Current FAA Airframe and Powerplant certification. * High school diploma or equivalent. * Valid, state-issued Driver's License. * Capable of using respirators and other personal protective equipment including eye and hearing protection. * Must possess or have ability to obtain a U.S. Passport or equivalent within 90 days of starting position. * Must be able to speak, read, and write in English. * Must be able to demonstrate authorization to work in the U.S. Preferred * Previous experience with CRJs Additional Information Work Environment: This job operates inside a climate controlled building. This role routinely uses standard office equipment such as computers, telephones, photocopiers, facsimile machines and filing cabinets.Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms.Security Clearance: All employees are required to pass the fingerprint-based criminal history records check (CHRC) per 49CFR1542.209. AAP/EEO Statement: PSA Airlines is an equal opportunity employer; qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, age, disability, genetic information, protected veteran status or any other characteristic protected by law.Other Duties: Please note this job description is not designated to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic II (Avionics/Electrician) th MXG) Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. ADDITIONAL QUALIFICATIONS/EXPERIENCE REQUIREMENTS: Aircraft Mechanic II (Avionics/Electrician): Electrical Experience: Minimum of four years total experience in aircraft maintenance as an aircraft avionics/electrician with one year on F-15 aircraft. The Contractor shall have the skill to remove and replace aircraft parts and accessories/components and the skill to make adjustments and settings according to established specifications. The Contractor shall also have the skill to identify and isolate integrated systems malfunctions and analyze performance and operate integrated avionics systems to determine operational condition per operational checks. Experience using specialized tools required for military aviation electrical connector assembly/disassembly and other associated electrical terminating devices is required. Aircraft modification and operational checks experience required. Experience in electrical harness fabrication and braiding. Electrical Knowledge: The Contractor shall have the ability to follow and accomplish tasks in accordance with existing published technical data. The Contractor shall have the ability to read and interpret engineering drawings and specifications required to accomplish maintenance tasks and modifications. Knowledge is mandatory of electrical, electronic, microelectronic, mechanical and indicator principles theory, and application relating to electrical systems; concepts and application of maintenance directives; meaning of symbols used in wiring diagrams, blueprints, and schematics; using and interpreting testing and measuring devices; and proper handling, use, and disposal of hazardous waste and materials. Other: Normal color vision as defined in AFI 48-123, Medical Examinations and Standards is mandatory for this specialty. Education: High school diploma, or equivalent, with successful completion of related military or commercial courses. Courses in basic electronics, mathematics, general science, physics, and mechanics are desirable. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: May occasionally perform duties as Team Lead Scheduled and unscheduled maintenance Maintenance Control planning and management Aircraft maintenance action documentation via logs, records, forms, and electronic means Support Equipment (SE) operation and inspections Aircraft inspections Troubleshooting General aircraft maintenance Technical Directive compliance and modifications Tool Control Program Tool issue/receipt supporting aircraft maintenance shops including hazardous materials, tool room/box/pouch configuration Maintain Aircraft, Engines, and SE Logbooks Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Requisition repair parts, materials, and consumable supplies through military supply system. Perform other tasks as directed. Preferred Qualifications: Eight or more years' experience in aircraft maintenance Three years' experience on F-15 aircraft Advanced Corrosion Control Course Basic Qualifications: Four years Aviation Maintenance experience One year experience on F-15 aircraft High school diploma, or equivalent, with successful completion of related military or commercial courses Must be able to work shift schedules as required per Performance Work Statement (PWS) Must be able work work-week schedules i.e. M-F, Sn-Th or as required per PWS Basic Corrosion Control Course. Must be able to work flexible work-week schedules as required Must be able to pass a background check Must have at a minimum an interim SECRET security clearance Must be eligible for Common Access Card (CAC) Must be eligible for Restricted Area Badge Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must be able to travel to support off station Temporary Duty (TDY) as required Compensation $37.73/hour Other Compensation Employees will receive a health and welfare fringe benefit of $2.65 for every hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees have a minimum of eleven paid holidays. After completing one year of service, employees will have two weeks paid vacation. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

The Flight Line Aircraft Mechanic II may supervise lower skilled mechanics and assist with troubleshooting malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, and auxiliary power unit for CH-53E aircraft. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment. The CH-53E mechanic is responsible for inspecting and maintaining rotor airframes and airframe components and performs duties relating to flight line operation. This worker reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Replaces or repairs worn or damaged components, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removes engine from aircraft, disassembles and inspects parts for wear, cracks, security, or other defects, and repairs or replaces defective engine parts and reassembles and installs engine in aircraft. Uses standard aircraft handling and taxi procedures in accordance with (IAW) Naval Aviation Training and Operating Procedures Standardization (NATOPS), specific aircraft manuals, and local regulations, to support the host squadron. Launches aircraft IAW published flight schedules or as needed to support emergencies. Performs Recovery (pre-positioning support equipment and aircraft directing), including hot brake checks, post flight servicing, static grounding (aircraft to ground) and chocks. Performs acceptance, conditional, daily, phase, pre D-Level, post D-Level, special, transfer, turnaround and zonal aircraft inspections and preoperational and periodic inspections on SE IAW Maintenance Requirements Cards (MRC) and NAVAIR technical manuals. Pre/Post-Op checks, fueling and operation of SE, tools, Individual Material Readiness List (IMRL) and Naval Aviation Metrology and Calibration (METCAL) assigned to the Power Line work center, to include conditional/scheduled inspections and periodic maintenance. Performs all duties in accordance with the Naval Aviation Maintenance Program (NAMP) and Commander Naval Air Forces Instruction 4790.2B. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, conduct maintenance inspections, and perform miscellaneous duties to service aircraft. This incumbent assists with the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, required to keep aircraft in safe operating condition. Performs duties of a Collateral Duty Inspector (CDI) and ensures all maintenance is performed and inspected in accordance with the NAMP and is accountable to the quality assurance officer and aircraft maintenance officer within the Maintenance Department. Requirements Performs routine aircraft maintenance functions Must demonstrate an operational knowledge of aircraft, aircraft systems, engines and component parts Operates aircraft towing equipment in towing operations. Maintains aircraft hydraulic systems Must have knowledge of the proper use of hand tools in aircraft maintenance Must be able to read and write, and interpret and comply with aircraft maintenance procedures, manuals, specifications, and directives, guides and forms used on the job Performs preventive maintenance inspections on aircraft and aircraft systems and subsystems Performs troubleshooting, repair, modifications, corrosion control and preservation of aircraft and aircraft systems and aircraft sub-systems, including fuel, oil and pneudraulic systems Overhauls aircraft components and sub-components. Performs functional checks, inspections, troubleshooting as required and trained Completes maintenance documentation accurately using OOMA, and required forms, as required by job assignment Must show proficiency in the use of OOMA within 90 days after assignment High school diploma or equivalent--General Educational Development (GED) certificate Must be skill qualified in a primary MOS from any of the following OccFlds: 6113/6173, Aircraft Maintenance, equivalent skill designation from other services or possess valid FAA Airframe and Power plant Certification. Must have four (4) years' minimum experience rotary wing aircraft

Performs skilled mechanical and electrical work installing, repairing and maintaining variety of equipment water and wastewater facilities. * Troubleshoots and makes repairs to pumps, motors, valves, piping, control and monitoring equipment, chemical feed equipment, sludge disposal equipment and plant facilities; * Maintains tools, equipment, and spare part inventories; * Performs preventive maintenance on utility booster stations, tanks, pressure valves and related equipment; * Ability to establish and maintain effective working relationships with associates and the general public; * Ability to receive, understand and follow through when given oral and written instructions from supervisor; * Skill in operating light and heavy equipment; * Skill in keeping records and making simple reports; * Working knowledge or ability to learn computer operations, procedures and software (i.e. asset management and plant monitoring software); * Inspects pump stations as required for proper operation and repair as needed; * Understand and comply with federal and state regulations regarding utility systems; * Employee will be assigned to a specific after hours on-call schedule; * Performs general housekeeping duties and ground maintenance; * Completion of documentation, via Cartegraph, on a daily basis to ensure proper inventory control, asset management and regulatory documentation; * Communicate with plant manager and operators regarding operating status of equipment and work progress; * Interact with citizens on the job site in a professional manner; * Attend training as needed to ensure compliance with safety and regulatory requirements; * Assist in emergency operations as needed; and * Performs additional duties as assigned. * Thorough knowledge of the installation, repair and maintenance of the mechanical, hydraulic and electrical components of water treatment and pump station equipment; * Thorough knowledge of the occupational hazards and necessary safety precautions of the work; * Ability to trouble shoot and perform routine maintenance tasks independently with minimal direction supervision. * Ability to establish and maintain effective working relationships with associates and the general public. * Ability to receive, understand and follow through when given oral and written instructions from supervisor; * Skill in operating light and heavy equipment; * Skill in keeping records and making simple reports; * Working knowledge or ability to learn computer operations, procedures and software (i.e. asset management and plant monitoring software). High school graduate or high school equivalent; plus, experience equivalent to two years full time in mechanical and electrical maintenance of which two years is in pump and electric motor repair preferred, but not required. * Commercial Driver's License (CDL), Class A; Boom truck operation experience; and or electrical certifications preferred. Must have a valid TN/VA driver's license.

Job Status/Type: Full time Level II Shift/ Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs. Performs inspections, maintenance, troubleshooting, repair, and annual rehabilitation of a variety of different amusement rides and attractions, depending on level of employee. Areas of responsibility include (but are not limited to) maintenance of gearboxes, chains, sprockets, hydraulic systems, pneumatic systems, wire rope, hoists, brakes, pumps, and large bearings. Climbing and working safely at height is an essential part of this job. Benefits: 3 weeks paid vacation (6 sick days, 8 paid holidays) Several medical coverage options to fit your needs best 401K match Maintenance-specific scholarships available FREE entry to ALL our parks and water parks! Perks: Yearly maintenance appreciation week celebration Complimentary tickets for friends and family Discounts on food and park merchandise Full-time and part-time employee events and gatherings Responsibilities: Job responsibilities include but are not limited to: Performs daily, weekly, monthly, annual, and other required inspections of amusement rides and related equipment as assigned, taking corrective actions as issues are identified. Inspections are visual as well as auditory. Trouble shoots a variety of mechanical, pneumatic, hydraulic, and electrical systems and takes appropriate corrective actions. Properly follows all repair procedures and maintains accurate documentation of all repairs. Maintains orderly and accurate records of all required inspections and work performed and submits required paperwork to supervision in a timely manner. Communicates the status of assigned rides both verbally and in written format. Maintains all assigned equipment in a safe and ready condition according to all applicable codes, laws, rules, company policies, and best practices. Reads, understands, and applies information from manufacturer's manuals for service, repair and or component replacement. Accurately reads blueprints (mechanical, pneumatic, and hydraulic). Completes proper documentation as required. Interacts with and communicates with various groups and individuals, such as the immediate supervisor, other Park managers and staff, co-workers, guests, vendors, contractors, inspectors, etc. Provides guest service according to Six Flags standards when serving the guest, including initiating guest interactions, answering questions, and giving directions. Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Six Flags safety guidelines and requirements and reports all unsafe or unusual conditions to supervisor. Meets scheduling availability requirements, including nights, weekends and holiday periods to meet business needs. Meets Six Flag's attendance requirements as outlined in Six Flag's attendance policies. Adheres to Six Flag's code of conduct including costuming and grooming standards as outlined in employees' Guidelines and other park/division specific policies and procedures. Performs other duties as assigned. Qualifications: Knowledge, Skills & Abilities: Strong knowledge of control processors, components, and communication networks used in real-time industrial applications. Strong proficiency in developing and reading one-line diagrams, and technical documents. Proficient at maintaining various rides and attractions. Good judgment, decision making and problem-solving skills. Effective verbal and written communication skills. Education: High school diploma or equivalent. License or Certification: Must meet location-specific requirements to work on specific rides and attractions. State or provincial certifications and/or licensing within if applicable in state. Valid driver's license. Welding certification preferred. Experience: Typically requires 4-6 years mechanical maintenance experience, including at least 2 years working on rides. Equivalency: Directly related experience or a combination of directly related education and experience and/or competencies may be considered in place of the above requirements.

Let your career take off with PSA Airlines About PSA PSA Airlines, a wholly owned subsidiary of American Airlines, offers unparalleled opportunities for growth and professional development. We value teamwork, diversity, and inclusivity and strive to create a safe, respectful, and happy work environment for our more than 4,000 employees. Our company culture, known as The PSA Way, is our foundation for operation and fosters stability, growth and a focus on the future while always placing safety at the forefront of everything we do. We are driven in our goals and achievements, eager to be better. We are reliable to one another and accountable for our actions. And we are caring in our daily interactions, with teammates, colleagues, and customers. Join our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. Benefits PSA offers the benefits you expect from a company focused on excellence. All eligible team members enjoy a comprehensive benefits package, including: * Travel privileges on the American Airlines global network * A generous vacation plan designed to let you enjoy your travel perks * 401(k) with company match * American Airlines Group (AAG) profit-sharing and bonus opportunities * A choice of three health plan options, all with nationwide coverage with the UnitedHealthcare Choice Plus network * Premium dental coverage * Vision plan options provided, including a plan that covers both glasses and contacts every year * Benefits navigation services, including finding a doctor, scheduling an appointment, understanding your medical bills, and free second opinion services * Access to 24-hour virtual urgent care services * Family planning and fertility treatment * LGBTQ+ friendly services including gender affirming care, assistance finding knowledgeable providers, and family planning * Company-paid Life and AD&D Insurance, Short-term and Long-term Disability, and supplemental life insurance options for spouses and dependent children * Flexible Spending Accounts for both Health Care and Dependent Care services * Comprehensive Employee Assistance Program providing a range of services, including 5 free in-person sessions with a health care professional Responsibilities Position Summary As the Airframe and Powerplant (A&P) Technician, you will impact PSA Airlines' business growth by conducting aviation repairs and services that allow for operations to be on time. By executing maintenance procedures in compliance with Federal Aviation Regulations and company standards, you are ensuring safe and reliable flights. Job Responsibilities * Will perform tasks necessary to comply with Federal Aviation Regulations and accept the responsibility for work performed by themselves and/or in conjunction with others and sign for same on the Company's approved forms. * Keep work areas clean. Return all equipment and tools to assigned areas. A&P Technicians will report all inoperative or faulty equipment to the Maintenance Supervisor or Lead Mechanic in charge. * Work will consist of and include any and all phases of repair and maintenance of aircraft with the aid of the employee's own tools, specialty tools provided by the Company, the use of test equipment, and Company-supplied technical manuals. * In certain cases, and A&P Technician may be authorized to perform required inspection items and assist in Company training programs. * Will at the commencement of each repair or inspection initiate the proper documentation. Parts tags will include a complete description of the discrepancy on all removed parts. Determine if the work to be performed is a Required Inspection Item. * Verifying, through proper documentation, that any part installed on any aircraft or component is approved for that aircraft or component and has been visually inspected and is free of damage or contamination. * Assure that hangar workshops and other areas assigned are maintained in an orderly manner. * Responsible for the Company's Security and Safety Management System (SMS) and associated Safety Risk Management and Safety Assurance outputs. * Perform other duties as assigned by the Maintenance Supervisor through the Lead Mechanic. Position Specifics Qualifications Required * Current FAA Airframe and Powerplant certification. * High school diploma or equivalent. * Valid, state-issued Driver's License. * Capable of using respirators and other personal protective equipment including eye and hearing protection. * Must possess or have ability to obtain a U.S. Passport or equivalent within 90 days of starting position. * Must be able to speak, read, and write in English. * Must be able to demonstrate authorization to work in the US. Preferred * Previous experience with CRJs. Additional Information Work Environment: This job operates inside a climate controlled building. This role routinely uses standard office equipment such as computers, telephones, photocopiers, facsimile machines and filing cabinets.Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms.Security Clearance: All employees are required to pass the fingerprint-based criminal history records check (CHRC) per 49CFR1542.209. AAP/EEO Statement: PSA Airlines is an equal opportunity employer; qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, age, disability, genetic information, protected veteran status or any other characteristic protected by law.Other Duties: Please note this job description is not designated to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

PENDING CONTRACT AWARD TASK DESCRIPTION: Aircraft Mechanic III (23023): Leads a team in the performance of aircraft maintenance, inspections, and scheduled / unscheduled maintenance. Processes the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. Capable of performing, supervising and inspecting the duties of Mechanic Is, IIs and IIIs. A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Avionics/Electrical Systems and related Sub-Systems, and Aircraft Logs and Records Administration Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. Quality Assurance Representative shall have experience writing with clarity and technical accuracy, and exhibit leadership and ensure adherence to all applicable policies and procedures. Possess a high degree of expertise in the control and coordination of aircraft maintenance. Thorough working knowledge of applicable maintenance/technical manuals and publications. Thorough working knowledge of aircraft maintenance records. Working understanding of the aircraft and aircraft systems. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Performs quality technical inspection of aircraft, aircraft components, parts, repairs, and systems (including avionics, electrical, instrument and armament) as required by functional assignment Performs quality and safety inspections of on-site equipment and tools used in aircraft maintenance, vehicles, and equipment Performs initial, in-progress and final quality technical inspections during maintenance, repair, modification, rework, and overhaul of aircraft, aircraft components, and component parts Provides technical guidance, instructions, and interpretation of written instructions and procedures to mechanics as required to assure acceptable quality work and flight line services. Assists in preparation, processing, and answering of Product Quality Deficiency Reports (PQDRs). Monitor compliance, conduct audits and provide guidance in Environmental Health and Safety (EH&S) Programs, (FOD/Confined Space/Lockout-Tag out/Fall Protection). Scheduled and unscheduled maintenance support for assigned CH-53 aircraft Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, corrosion control, preservation/de-preservation Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in in the activities plan and daily flight schedule Aircraft maintenance action documentation via logs, records, forms, and electronic means Troubleshoot malfunctions in aircraft structure, landing gear, pneumatic, hydraulic, ventilation and heating, flight surfaces and controls, dynamic components, and powerplant systems. Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO). Inspect, repair, replace, and rebuild aircraft components/sub components to include rigging of flight control. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. General aircraft maintenance Technical Directive compliance and modifications Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Perform phase, scheduled, unscheduled, periodic, and other hourly or calendar inspections. Requisition repair parts, materials, and consumable supplies through military supply system. Perform other tasks as directed. Preferred Qualifications: Seven or more years' CH-53 rotary wing experience Ten or more years' rotary wing maintenance experience Naval Aviation Maintenance Control Management for Optimized Organization Maintenance Activity course (C-555-0053) or if previously completed, both the Naval Aviation Maintenance Control Management course (Course D/E-555-0040) and the Naval Aviation Officer and Senior Supervisor NALCOMIS OOMA Familiarization course (Course D/E-555-0054). Seven or more years' experience with NALCOMIS/OOMA Basic Corrosion Control Course Advanced Corrosion Control Course/Paint and Final Finish Basic Qualifications: Must be able to read and interpret complex engineering drawings, technical manuals, and use measuring instruments, gauges, tools, and test equipment. Must show proficiency in the use of OOMA within 90 days after assignment. 4 years' experience as a Quality Assurance Representative (QAR) on CH/MH-53E. Must have completed the Naval Aviation Logistics Command Management Information System (NALCOMIS) (Optimized) Organizational Level Maintenance Activity (OMA) Naval Aviation Quality Assurance Administration Course (Course C-555-0046). High school diploma or equivalent General Educational Development (GED) certificate Must be able to work shift schedules as required per Performance Work Statement (PWS) Must be able work work-week schedules i.e. M-F, Sn-Th or as required per PWS Must be able to pass a background check Must be able to obtain favorable National Agency Check with Written Inquires (NACI), IAW DTM-08-003 Next Generation Common Access Card (CAC) Implementation Guidance Must be able to climb ladders, raised platforms, and aircraft Must be able to use hand and power tools Must have dexterity to handle small parts Must be able to deploy to support off station exercises and perform other support duties if required Employment is contingent on a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

The Flight Line Aircraft Mechanic troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, and auxiliary power unit for CH-53E aircraft. This mechanic may supervise the jacking and towing of aircraft, makes adjustments and settings such as cable tension and seat movement settings and adjustments; obtains standard parts such as fuel and oil line connections and fittings, cable linkage, and harnesses by referring to parts manuals and by making comparisons with samples, may perform pre-flight, thru-flight, and post-flight maintenance inspections, enter in the maintenance records description of the work performed, and services engines and aircraft components at line station making repairs, short of overhaul required to keep aircraft in safe operating condition. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment. The CH-53E Worker is responsible for inspecting and maintaining rotor airframes and airframe components and performs duties relating to flight line operation. Replaces or repairs worn or damaged components, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removes engine from aircraft, disassembles and inspects parts for wear, cracks, security, or other defects, and repairs or replaces defective engine parts and reassembles and installs engine in aircraft. Uses standard aircraft handling and taxi procedures in accordance with (IAW) Naval Aviation Training and Operating Procedures Standardization (NATOPS), specific aircraft manuals, and local regulations, to support the host squadron. Launches aircraft IAW published flight schedules or as needed to support emergencies. Performs Recovery (pre-positioning support equipment and aircraft directing), including hot brake checks, post flight servicing, static grounding (aircraft to ground) and chocks. Performs acceptance, conditional, daily, phase, pre D-Level, post D-Level, special, transfer, turnaround and zonal aircraft inspections and preoperational and periodic inspections on SE IAW Maintenance Requirements Cards (MRC) and NAVAIR technical manuals. Pre/Post-Op checks, fueling and operation of SE, tools, Individual Material Readiness List (IMRL) and Naval Aviation Metrology and Calibration (METCAL) assigned to the Power Line work center, to include conditional/scheduled inspections and periodic maintenance. Performs all duties in accordance with the Naval Aviation Maintenance Program (NAMP) and Commander Naval Air Forces Instruction 4790.2B. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, conduct maintenance inspections, and perform miscellaneous duties to service aircraft. This incumbent assists with the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, required to keep aircraft in safe operating condition. Requirements Performs aircraft maintenance to include inspection, operational test, repair, and modification of aircraft electrical/avionics systems Demonstrates in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment. Must be familiar with operational capabilities and limitations of electrical/avionics systems Performs the troubleshooting and rewiring of complex avionics/electrical systems and subsystems discrepancies and modifications Uses blueprints, schematics, technical drawings and manufacturers' drawings and sketches in the performance of assigned duties May be required to perform Maintenance Operational Checks (MOCs) Completes maintenance documentation accurately using OOMA, and required forms, as required by job assignment. Must show proficiency in the use of OOMA within 90 days after assignment High school diploma or equivalent-General Educational Development (GED) certificate. (2) years' experience on Military aircraft is required. FAA Airframe & Power plants (A&P) certification and relevant civilian aircraft experience may be substituted. Must be able to meet any Government/Company licensing/qualification requirements for the position

Job Status/Type: Full time Level II Shift/ Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs. Performs inspections, maintenance, troubleshooting, repair, and annual rehabilitation of a variety of different amusement rides and attractions, depending on level of employee. Areas of responsibility include (but are not limited to) maintenance of gearboxes, chains, sprockets, hydraulic systems, pneumatic systems, wire rope, hoists, brakes, pumps, and large bearings. Climbing and working safely at height is an essential part of this job. Benefits: 3 weeks paid vacation (6 sick days, 8 paid holidays) Several medical coverage options to fit your needs best 401K match Maintenance-specific scholarships available FREE entry to ALL our parks and water parks! Perks: Yearly maintenance appreciation week celebration Complimentary tickets for friends and family Discounts on food and park merchandise Full-time and part-time employee events and gatherings Responsibilities: Job responsibilities include but are not limited to: Performs daily, weekly, monthly, annual, and other required inspections of amusement rides and related equipment as assigned, taking corrective actions as issues are identified. Inspections are visual as well as auditory. Trouble shoots a variety of mechanical, pneumatic, hydraulic, and electrical systems and takes appropriate corrective actions. Properly follows all repair procedures and maintains accurate documentation of all repairs. Maintains orderly and accurate records of all required inspections and work performed and submits required paperwork to supervision in a timely manner. Communicates the status of assigned rides both verbally and in written format. Maintains all assigned equipment in a safe and ready condition according to all applicable codes, laws, rules, company policies, and best practices. Reads, understands, and applies information from manufacturer's manuals for service, repair and or component replacement. Accurately reads blueprints (mechanical, pneumatic, and hydraulic). Completes proper documentation as required. Interacts with and communicates with various groups and individuals, such as the immediate supervisor, other Park managers and staff, co-workers, guests, vendors, contractors, inspectors, etc. Provides guest service according to Six Flags standards when serving the guest, including initiating guest interactions, answering questions, and giving directions. Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Six Flags safety guidelines and requirements and reports all unsafe or unusual conditions to supervisor. Meets scheduling availability requirements, including nights, weekends and holiday periods to meet business needs. Meets Six Flag's attendance requirements as outlined in Six Flag's attendance policies. Adheres to Six Flag's code of conduct including costuming and grooming standards as outlined in employees' Guidelines and other park/division specific policies and procedures. Performs other duties as assigned. Qualifications: Knowledge, Skills & Abilities: Strong knowledge of control processors, components, and communication networks used in real-time industrial applications. Strong proficiency in developing and reading one-line diagrams, and technical documents. Proficient at maintaining various rides and attractions. Good judgment, decision making and problem-solving skills. Effective verbal and written communication skills. Education: High school diploma or equivalent. License or Certification: Must meet location-specific requirements to work on specific rides and attractions. State or provincial certifications and/or licensing within if applicable in state. Valid driver's license. Welding certification preferred. Experience: Typically requires 4-6 years mechanical maintenance experience, including at least 2 years working on rides. Equivalency: Directly related experience or a combination of directly related education and experience and/or competencies may be considered in place of the above requirements.

Let your career take off with PSA Airlines About PSA PSA Airlines, a wholly owned subsidiary of American Airlines, offers unparalleled opportunities for growth and professional development. We value teamwork, diversity, and inclusivity and strive to create a safe, respectful, and happy work environment for our more than 4,000 employees. Our company culture, known as The PSA Way, is our foundation for operation and fosters stability, growth and a focus on the future while always placing safety at the forefront of everything we do. We are driven in our goals and achievements, eager to be better. We are reliable to one another and accountable for our actions. And we are caring in our daily interactions, with teammates, colleagues, and customers. Join our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. Benefits PSA offers the benefits you expect from a company focused on excellence. All eligible team members enjoy a comprehensive benefits package, including: Travel privileges on the American Airlines global network A generous vacation plan designed to let you enjoy your travel perks 401(k) with company match American Airlines Group (AAG) profit-sharing and bonus opportunities A choice of three health plan options, all with nationwide coverage with the UnitedHealthcare Choice Plus network Premium dental coverage Vision plan options provided, including a plan that covers both glasses and contacts every year Benefits navigation services, including finding a doctor, scheduling an appointment, understanding your medical bills, and free second opinion services Access to 24-hour virtual urgent care services Family planning and fertility treatment LGBTQ+ friendly services including gender affirming care, assistance finding knowledgeable providers, and family planning Company-paid Life and AD&D Insurance, Short-term and Long-term Disability, and supplemental life insurance options for spouses and dependent children Flexible Spending Accounts for both Health Care and Dependent Care services Comprehensive Employee Assistance Program providing a range of services, including 5 free in-person sessions with a health care professional Responsibilities Position Summary As the Airframe and Powerplant (A&P) Technician, you will impact PSA Airlines' business growth by conducting aviation repairs and services that allow for operations to be on time. By executing maintenance procedures in compliance with Federal Aviation Regulations and company standards, you are ensuring safe and reliable flights. Job Responsibilities Will perform tasks necessary to comply with Federal Aviation Regulations and accept the responsibility for work performed by themselves and/or in conjunction with others and sign for same on the Company's approved forms. Keep work areas clean. Return all equipment and tools to assigned areas. A&P Technicians will report all inoperative or faulty equipment to the Maintenance Supervisor or Lead Mechanic in charge. Work will consist of and include any and all phases of repair and maintenance of aircraft with the aid of the employee's own tools, specialty tools provided by the Company, the use of test equipment, and Company-supplied technical manuals. In certain cases, and A&P Technician may be authorized to perform required inspection items and assist in Company training programs. Will at the commencement of each repair or inspection initiate the proper documentation. Parts tags will include a complete description of the discrepancy on all removed parts. Determine if the work to be performed is a Required Inspection Item. Verifying, through proper documentation, that any part installed on any aircraft or component is approved for that aircraft or component and has been visually inspected and is free of damage or contamination. Assure that hangar workshops and other areas assigned are maintained in an orderly manner. Responsible for the Company's Security and Safety Management System (SMS) and associated Safety Risk Management and Safety Assurance outputs. Perform other duties as assigned by the Maintenance Supervisor through the Lead Mechanic. Position Specifics Qualifications Required Current FAA Airframe and Powerplant certification. High school diploma or equivalent. Valid, state-issued Driver's License. Capable of using respirators and other personal protective equipment including eye and hearing protection. Must possess or have ability to obtain a U.S. Passport or equivalent within 90 days of starting position. Must be able to speak, read, and write in English. Must be able to demonstrate authorization to work in the US. Preferred Previous experience with CRJs. Additional Information Work Environment: This job operates inside a climate controlled building. This role routinely uses standard office equipment such as computers, telephones, photocopiers, facsimile machines and filing cabinets. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms. Security Clearance: All employees are required to pass the fingerprint-based criminal history records check (CHRC) per 49CFR1542.209. AAP/EEO Statement: PSA Airlines is an equal opportunity employer; qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, age, disability, genetic information, protected veteran status or any other characteristic protected by law. Other Duties: Please note this job description is not designated to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic I TASK DESCRIPTION: Aircraft Mechanic I (23021): Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair. May be required to be licensed by Federal Aviation Administration. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Airframe/Structural, Corrosion, Landing Gear, Wing/Pylon Fold, Hydraulic/Pneumatic, Mechanical Flight Control Systems, Avionics/Electrical Systems and related Sub-Systems, Blade/Pylon Fold, Power Plants and related Sub-Systems, Fuel and Air Systems, Rotor Systems, and related Sub-systems Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Performs aircraft maintenance functions of the Line, Corrosion Control, and Aircraft Organizational Level maintenance Scheduled and unscheduled maintenance support for assigned H-1 aircraft Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, surface finish removal, corrosion control, preservation/de-preservation Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in the activities plan and daily flight schedule Aircraft maintenance action documentation via logs, records, forms, and electronic means Troubleshoot malfunctions in aircraft structure, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO). Inspect, repair, replace, and rebuild aircraft components/sub components to include rigging of flight control. Read and interpret manufacturers' maintenance manuals, military technical manuals, service bulletins, technical data, engineering data, blueprints, manufacturers' drawings, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Flight Line operations/functions at detachment locations as required Confined space operations to include fuel cell entry Support Equipment (SE) operation and inspections Aircraft launch and recovery Aircraft inspections Aircraft movement Support services General aircraft maintenance Technical Directive compliance and modifications Maintain Aircraft, Engines, and SE Logbooks Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Perform phase, scheduled, unscheduled, periodic, and other hourly or calendar inspections. Perform preflight, thru flight, and post-flight maintenance inspections, launch and recover aircraft, and Preventive Maintenance Daily Inspections. Requisition repair parts, materials, and consumable supplies through military supply system. Other tasks as directed Preferred Qualifications: Three or more years' H-1 rotary wing experience Five or more years rotary wing maintenance experience Cadmium Plating qualified Qualified to certify H-1 aircraft Safe-for-Flight Naval Aviation Maintenance Control Management course (C-555-0053) Collateral Duty Quality Assurance Representative (CDQAR) for Airframes, Power Plants and Electrical Systems Collateral Duty Inspector (CDI) for Line, Corrosion Control and Avionics Systems Quality Assurance Safety Observer (QASO) Ammunition & Explosive handling qualifications Vibration Analysis Operator / Interpreter Tire and Wheel Hydraulic Contamination Plane Captain Paint, Final Finish Insignia (N-701-001) and Aircraft Corrosion (N-701-0013) Basic Qualifications: Individual (I) Aircraft Maintenance Qualification Two years aviation maintenance experience Must achieve Collateral Duty Inspector (CDI) AH-1Z & UH-1Y designation for DOL Skill within 90 days of hire Must be able to work 1st, 2nd , 3rd and Weekend shift as required Must be able to work flexible schedule Mon-Fri ,Sun-Thur and Fri-Mon as required Must be able to pass background check Must be able to obtain favorable National Agency Check with Written Inquires (NACI), IAW DTM-08-003 “Next Generation Common Access Card (CAC) Implementation Guidance or Secret security clearance as required for the position Must be able to climb ladders, raised platforms, and aircraft Must be able to use hand and power tools Must have dexterity to handle small parts Must be able to deploy to support off station exercises and perform other support duties if required Compensation $30.43/hour Other Compensation Employees receive a minimum health and welfare benefit of $2.65 per hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees receive 2 weeks' paid vacation after 1 year of service. KAI employees at MALS-26 have 11 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

The Avionics Aircraft Mechanic III may supervise lower skilled mechanics and assist with troubleshooting malfunctions in flight surfaces and controls, anti-icing, pneudraulic, engines, and auxiliary power unit for CH-53E aircraft. This worker reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Aircraft communications/navigation/electrical systems technicians, CH-53E, install, remove, inspect, test, maintain, and repair systems, components, and ancillary equipment of installed Aircraft Communications/Navigation/Electrical Systems to include Deceptive Electronic Countermeasures (DECM) Systems at the Organizational Maintenance Activity (OMA) level. Must possess a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, and micrometers. Requires working knowledge of technical publications. Receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. Removes, repairs, modifies, tests, troubleshoots, calibrates, and installs electrical systems, equipment and accessories used in aircraft; makes functional checks on electrical systems to ensure performance and reliability and correct malfunctions disclosed by static, ground, and flight tests; and replaces defective wiring and installs new wiring for aircraft changes, modifications and repairs. Overhauls, repairs, modifies and tests aircraft electrical system accessories such as motors, dynamotors, inverters, voltage regulators, relays, cutouts, engine synchronizers, electric motor driven air compressors and activators, DC generators, AC alternators, DC/AC electrical controls, cockpit air conditioning controls, engine temperature controls, and transistorized control equipment, etc. Installs, troubleshoots, calibrates, and tests complex electrical systems and devices on military aircraft to ensure precise performance and reliability of all electrical systems. Sets up test positions using test equipment such as oscilloscopes, audio signal generators, frequency meters, voltmeters, watt meters and ammeters. Tests the various units for compliance with the proper tolerances prescribed for transient time, noise amplitude, and frequencies; adjusts resonant circuits, computes alternative current loads; and makes all necessary adjustments to bring the units up to prescribed operational standards. Performs all duties in accordance with the Naval Aviation Maintenance Program (NAMP) and Commander Naval Air Forces Instruction 4790.2B. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, conducts maintenance inspections, and performs miscellaneous duties to service aircraft. Assists with the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, required to keep aircraft in safe operating condition. Performs duties of a Collateral Duty Quality Assurance Representative (CDQAR) and ensures all maintenance is performed and inspected in accordance with the NAMP and is accountable to the quality assurance officer and aircraft maintenance officer within the Maintenance Department. Requirements Performs aircraft maintenance to include inspection, operational test, repair, and modification of aircraft electrical/avionics systems. Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance and instruction to other employees as needed. Possess a high degree of expertise of aircraft electrical/avionics systems Demonstrates in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment Must be familiar with operational capabilities and limitations of electrical/avionics systems Possess a thorough working knowledge of the detection, prevention and treatment of corrosion Performs the troubleshooting and rewiring of complex avionics/electrical systems and subsystems discrepancies and modifications Provides technical assistance, guidance and instruction as Estimates and accesses damage of avionics/electrical components/systems as related to crash and mishap damaged aircraft to include repair and/or replacement, man-hours, parts, components, and materials When assigned to the flight line, provide customer support during launch and recovery and aircraft security as required. Completes maintenance documentation accurately using OOMA, and required forms, as required by job assignment. Six (6) years' expereince on Military aircraft is required. AFF Airframe & Powerplants (A&P) certification and relevant civilian aircraft experience may be substituted. Must show proficiency in the use of OOMA within 90 days after assignment High school diploma or equivalent General Educational Development (GED) certificate.

Job Status/Type: Full time Level II Shift/ Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs. Performs inspections, maintenance, troubleshooting, repair, and annual rehabilitation of a variety of different amusement rides and attractions, depending on level of employee. Areas of responsibility include (but are not limited to) maintenance of gearboxes, chains, sprockets, hydraulic systems, pneumatic systems, wire rope, hoists, brakes, pumps, and large bearings. Climbing and working safely at height is an essential part of this job. Benefits: 3 weeks paid vacation (6 sick days, 8 paid holidays) Several medical coverage options to fit your needs best 401K match Maintenance-specific scholarships available FREE entry to ALL our parks and water parks! Perks: Yearly maintenance appreciation week celebration Complimentary tickets for friends and family Discounts on food and park merchandise Full-time and part-time employee events and gatherings Responsibilities: Job responsibilities include but are not limited to: Performs daily, weekly, monthly, annual, and other required inspections of amusement rides and related equipment as assigned, taking corrective actions as issues are identified. Inspections are visual as well as auditory. Trouble shoots a variety of mechanical, pneumatic, hydraulic, and electrical systems and takes appropriate corrective actions. Properly follows all repair procedures and maintains accurate documentation of all repairs. Maintains orderly and accurate records of all required inspections and work performed and submits required paperwork to supervision in a timely manner. Communicates the status of assigned rides both verbally and in written format. Maintains all assigned equipment in a safe and ready condition according to all applicable codes, laws, rules, company policies, and best practices. Reads, understands, and applies information from manufacturer's manuals for service, repair and or component replacement. Accurately reads blueprints (mechanical, pneumatic, and hydraulic). Completes proper documentation as required. Interacts with and communicates with various groups and individuals, such as the immediate supervisor, other Park managers and staff, co-workers, guests, vendors, contractors, inspectors, etc. Provides guest service according to Six Flags standards when serving the guest, including initiating guest interactions, answering questions, and giving directions. Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Six Flags safety guidelines and requirements and reports all unsafe or unusual conditions to supervisor. Meets scheduling availability requirements, including nights, weekends and holiday periods to meet business needs. Meets Six Flag's attendance requirements as outlined in Six Flag's attendance policies. Adheres to Six Flag's code of conduct including costuming and grooming standards as outlined in employees' Guidelines and other park/division specific policies and procedures. Performs other duties as assigned. Qualifications: Knowledge, Skills & Abilities: Strong knowledge of control processors, components, and communication networks used in real-time industrial applications. Strong proficiency in developing and reading one-line diagrams, and technical documents. Proficient at maintaining various rides and attractions. Good judgment, decision making and problem-solving skills. Effective verbal and written communication skills. Education: High school diploma or equivalent. License or Certification: Must meet location-specific requirements to work on specific rides and attractions. State or provincial certifications and/or licensing within if applicable in state. Valid driver's license. Welding certification preferred. Experience: Typically requires 4-6 years mechanical maintenance experience, including at least 2 years working on rides. Equivalency: Directly related experience or a combination of directly related education and experience and/or competencies may be considered in place of the above requirements.

Let your career take off with PSA Airlines About PSA PSA Airlines, a wholly owned subsidiary of American Airlines, offers unparalleled opportunities for growth and professional development. We value teamwork, diversity, and inclusivity and strive to create a safe, respectful, and happy work environment for our more than 4,000 employees. Our company culture, known as The PSA Way, is our foundation for operation and fosters stability, growth and a focus on the future while always placing safety at the forefront of everything we do. We are driven in our goals and achievements, eager to be better. We are reliable to one another and accountable for our actions. And we are caring in our daily interactions, with teammates, colleagues, and customers. Join our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. Benefits PSA offers the benefits you expect from a company focused on excellence. All eligible team members enjoy a comprehensive benefits package, including: * Travel privileges on the American Airlines global network * A generous vacation plan designed to let you enjoy your travel perks * 401(k) with company match * American Airlines Group (AAG) profit-sharing and bonus opportunities * A choice of three health plan options, all with nationwide coverage with the UnitedHealthcare Choice Plus network * Premium dental coverage * Vision plan options provided, including a plan that covers both glasses and contacts every year * Benefits navigation services, including finding a doctor, scheduling an appointment, understanding your medical bills, and free second opinion services * Access to 24-hour virtual urgent care services * Family planning and fertility treatment * LGBTQ+ friendly services including gender affirming care, assistance finding knowledgeable providers, and family planning * Company-paid Life and AD&D Insurance, Short-term and Long-term Disability, and supplemental life insurance options for spouses and dependent children * Flexible Spending Accounts for both Health Care and Dependent Care services * Comprehensive Employee Assistance Program providing a range of services, including 5 free in-person sessions with a health care professional Responsibilities Position Summary As the Airframe and Powerplant (A&P) Technician, you will impact PSA Airlines' business growth by conducting aviation repairs and services that allow for operations to be on time. By executing maintenance procedures in compliance with Federal Aviation Regulations and company standards, you are ensuring safe and reliable flights. Job Responsibilities * Will perform tasks necessary to comply with Federal Aviation Regulations and accept the responsibility for work performed by themselves and/or in conjunction with others and sign for same on the Company's approved forms. * Keep work areas clean. Return all equipment and tools to assigned areas. A&P Technicians will report all inoperative or faulty equipment to the Maintenance Supervisor or Lead Mechanic in charge. * Work will consist of and include any and all phases of repair and maintenance of aircraft with the aid of the employee's own tools, specialty tools provided by the Company, the use of test equipment, and Company-supplied technical manuals. * In certain cases, and A&P Technician may be authorized to perform required inspection items and assist in Company training programs. * Will at the commencement of each repair or inspection initiate the proper documentation. Parts tags will include a complete description of the discrepancy on all removed parts. Determine if the work to be performed is a Required Inspection Item. * Verifying, through proper documentation, that any part installed on any aircraft or component is approved for that aircraft or component and has been visually inspected and is free of damage or contamination. * Assure that hangar workshops and other areas assigned are maintained in an orderly manner. * Responsible for the Company's Security and Safety Management System (SMS) and associated Safety Risk Management and Safety Assurance outputs. * Perform other duties as assigned by the Maintenance Supervisor through the Lead Mechanic. Position Specifics Qualifications Required * Current FAA Airframe and Powerplant certification. * High school diploma or equivalent. * Valid, state-issued Driver's License. * Capable of using respirators and other personal protective equipment including eye and hearing protection. * Must possess or have ability to obtain a U.S. Passport or equivalent within 90 days of starting position. * Must be able to speak, read, and write in English. * Must be able to demonstrate authorization to work in the U.S. Preferred * Previous experience with CRJs Additional Information Work Environment: This job operates inside a climate controlled building. This role routinely uses standard office equipment such as computers, telephones, photocopiers, facsimile machines and filing cabinets.Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms.Security Clearance: All employees are required to pass the fingerprint-based criminal history records check (CHRC) per 49CFR1542.209. AAP/EEO Statement: PSA Airlines is an equal opportunity employer; qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, age, disability, genetic information, protected veteran status or any other characteristic protected by law.Other Duties: Please note this job description is not designated to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

PENDING CONTRACT AWARD Task Description: Aircraft Mechanic III (23023): Leads a team in the performance of aircraft maintenance, inspections, and scheduled/unscheduled maintenance. Possesses the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. Capable of performing, supervising, and inspecting the duties of Mechanic I's, II's and III's. A person in this position maintains repairs and modifies aircraft structures, structural components, and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike; must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Corrosion Control/Aircraft Painting/Low Observable Material Restoration Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Scheduled and unscheduled maintenance support for assigned F/A-18 and F-35 aircraft Aircraft maintenance action documentation via logs, records, forms, and electronic means Support Equipment (SE) operation and inspections Aircraft inspections Aircraft movement Corrosion Control/Aircraft Painting/Low Observable Material Restoration Preservation and de-preservation General aircraft maintenance Low Observable Health Assessment System Data Entry Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Perform other tasks as directed. Preferred Qualifications: Eight or more years' F/A-18 and or F-35 experience Ten or more years' aviation maintenance experience Familiarity and ability to use NAVAIR IETMS. Four or more years' experience with NALCOMIS/OOMA Basic Corrosion Control Course Advanced Corrosion Control Course/Paint and Final Finish Hydraulic Contamination Qualification Aircraft Engine/APU Qualification Aircraft Jacking Qualification Previously certified F/A-18 and or F-35 CDI/CDQAR Basic Qualifications: Six or more years' F/A-18 or F-25 experience Low Observable Paint Qualified Individual (I) Aircraft Maintenance Qualification Must be able to work shift schedules as required per Performance Work Statement (PWS) Must be able to work work-week schedules i.e. M-F, Sn-Th or as required per PWS Must be able to pass a background check Must be able to obtain favorable National Agency Check with Written Inquires (NACI), IAW DTM-08-003 “Next Generation Common Access Card (CAC) Implementation Guidance Secret security clearance Must be able to climb ladders, raised platforms, and aircraft Must be able to use hand and power tools Must have dexterity to handle small parts Must be able to pass employment physicals Must be able to deploy to support off station exercises and perform other support duties if required Compensation $38.82/hour Other Compensation Employees will receive a health and welfare benefit of $2.65 for every hour worked. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees can enroll in KAI's 401k plan. Employees have a minimum of eleven paid holidays. After completing one year of service, employees will have two weeks' paid vacation. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Job Status/Type: Full time Level II Shift/ Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs. Performs inspections, maintenance, troubleshooting, repair, and annual rehabilitation of a variety of different amusement rides and attractions, depending on level of employee. Areas of responsibility include (but are not limited to) maintenance of gearboxes, chains, sprockets, hydraulic systems, pneumatic systems, wire rope, hoists, brakes, pumps, and large bearings. Climbing and working safely at height is an essential part of this job. Benefits: 3 weeks paid vacation (6 sick days, 8 paid holidays) Several medical coverage options to fit your needs best 401K match Maintenance-specific scholarships available FREE entry to ALL our parks and water parks! Perks: Yearly maintenance appreciation week celebration Complimentary tickets for friends and family Discounts on food and park merchandise Full-time and part-time employee events and gatherings Responsibilities: Job responsibilities include but are not limited to: Performs daily, weekly, monthly, annual, and other required inspections of amusement rides and related equipment as assigned, taking corrective actions as issues are identified. Inspections are visual as well as auditory. Trouble shoots a variety of mechanical, pneumatic, hydraulic, and electrical systems and takes appropriate corrective actions. Properly follows all repair procedures and maintains accurate documentation of all repairs. Maintains orderly and accurate records of all required inspections and work performed and submits required paperwork to supervision in a timely manner. Communicates the status of assigned rides both verbally and in written format. Maintains all assigned equipment in a safe and ready condition according to all applicable codes, laws, rules, company policies, and best practices. Reads, understands, and applies information from manufacturer's manuals for service, repair and or component replacement. Accurately reads blueprints (mechanical, pneumatic, and hydraulic). Completes proper documentation as required. Interacts with and communicates with various groups and individuals, such as the immediate supervisor, other Park managers and staff, co-workers, guests, vendors, contractors, inspectors, etc. Provides guest service according to Six Flags standards when serving the guest, including initiating guest interactions, answering questions, and giving directions. Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Six Flags safety guidelines and requirements and reports all unsafe or unusual conditions to supervisor. Meets scheduling availability requirements, including nights, weekends and holiday periods to meet business needs. Meets Six Flag's attendance requirements as outlined in Six Flag's attendance policies. Adheres to Six Flag's code of conduct including costuming and grooming standards as outlined in employees' Guidelines and other park/division specific policies and procedures. Performs other duties as assigned. Qualifications: Knowledge, Skills & Abilities: Strong knowledge of control processors, components, and communication networks used in real-time industrial applications. Strong proficiency in developing and reading one-line diagrams, and technical documents. Proficient at maintaining various rides and attractions. Good judgment, decision making and problem-solving skills. Effective verbal and written communication skills. Education: High school diploma or equivalent. License or Certification: Must meet location-specific requirements to work on specific rides and attractions. State or provincial certifications and/or licensing within if applicable in state. Valid driver's license. Welding certification preferred. Experience: Typically requires 4-6 years mechanical maintenance experience, including at least 2 years working on rides. Equivalency: Directly related experience or a combination of directly related education and experience and/or competencies may be considered in place of the above requirements.