Aircraft mechanic jobs in Lancaster, CA

Aircraft Mechanic - Power Plants performs Organizational, Intermediate, and limited Depot level maintenance to include inspection, operational test, repair, modification, and troubleshooting on Gulfstream aircraft, components, and equipment. Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance, and instruction to other employees as needed. **DUTIES AND RESPONSIBILITIES** + Aircraft Mechanic - Power Plants performs Organizational, Intermediate, and limited Depot level maintenance to include inspection, operational test, repair, modification, and troubleshooting on Gulfstream aircraft, components, and equipment. + Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance, and instruction to other employees as needed. + Possess a high degree of expertise in aircraft systems. Demonstrates in-depth knowledge of applicable maintenance/technical manuals, publications, instructions, and special tools and test equipment. + Must be familiar with operational capabilities and limitations of aircraft systems and be able to maintain all aircraft main, auxiliary, secondary power systems, fuel systems, engine level and bleed air components. + Perform troubleshooting, testing, low and high power turn operational checks of power plant systems, replacing or repairing worn or damaged components, such as fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes and compressor bleed valves using hand tools, gauges, and testing equipment; removing and replacing engines on + Required to read and interpret blueprints, technical directives, planning documents, test specifications, technical publications and procedures, and applicable safety manuals. **QUALIFICATIONS AND REQUIREMENTS:** + Must have a minimum of 5 years of experience in Aircraft Maintenance. + 2-3 years' experience on Gulfstream required; GIII series preferred (GIV considered). + Must possess or obtain within one (1) year of hiring, an FAA Airframe, and Power plants license. + Must be customer-oriented + U.S. Citizenship - required + Valid State Driver's License - required + Valid U.S. Passport - required + High School Degree or GED - required + Ability to travel - required + Must obtain basic hand tools and toolbox within three (3) months of hire. **Security Clearance Required:** Able to obtain and maintain U.S. Secret security clearance - active clearance preferred **Physical Demands:** This maintenance classification activity is usually accomplished in a flight line-like environment with extensive climbing, standing, stooping, bending, pushing, kneeling, stretching, and walking demands. May require lifting of objects whose weight normally will not exceed 50lbs. Special vision abilities required to perform this job are close and peripheral vision and acceptable depth perception. **Work Environment:** The diversity of working conditions ranges from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject the individual to severe changes in temperature, wind, rain, etc. May be required to work in areas where high noise hazards, exposure to fumes, airborne particles, and electrical shock hazards exist. **Hourly** **$44.03 USD** + **Benefits include the following:** + Healthcare coverage + Retirement plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources + Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

The Aircraft Mechanic performs organizational, intermediate, and limited depot-level maintenance including inspection, operational test, repair, modification, routine daily, and periodic servicing, and troubleshooting on F-15 B/D, F-16 aircraft, aircraft systems, components, and equipment. Additionally, ensures flight readiness and supports and executes launch and recovery operations. Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance, and instruction to other employees as needed. QUALIFICATIONS: * 3-5 years of experience in Aircraft Maintenance with F-15, and F-16 (F-22 experience will be considered). * Experience maintaining other military fighters and FAA aircraft is a plus. * Possess a high degree of aircraft systems expertise and be able to demonstrate in-depth knowledge of applicable maintenance/technical manuals, publications, instructions, special tools, test equipment, and troubleshooting skills. * Be familiar with operational capabilities and limitations of aircraft systems and be able to maintain and service all aircraft main, auxiliary, secondary power systems, fuel systems, engine level and bleed air components. * Able to read and interpret blueprints, technical directives, planning documents, test specifications, technical publications and procedures, and applicable safety manuals. * Must be customer-oriented. * Plane Captain / Crew Chief certified IAW / Government approved certification program for a minimum of one 1 T/M/S aircraft is highly desired. Physical Demands: This maintenance classification activity is usually accomplished in a flight line-like environment with extensive climbing, standing, stooping, bending, pushing, kneeling, stretching, and walking demands. May require lifting of objects whose weight will not normally exceed 50lbs. Special vision abilities required to perform this job are close and peripheral vision and acceptable depth perception. Work Environment: The diversity of working conditions ranges from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject the individual to severe changes in temperature, wind, rain, etc. May be required to work in areas where high noise hazards, exposure to fumes, airborne particles, and electrical shock hazards exist. REQUIREMENTS: * FAA Airframe and Power Plant (A&P) License or able to obtain within 1 year of hire * U.S. Citizenship and Valid U.S. Passport * Valid State Driver's License * High School Diploma or GED * Ability to travel * Must obtain basic hand tools and toolbox within three (3) months of hire. US Secret Clearance: Active Current a plus, able to obtain and maintain - Required Vertex is committed to building a diverse and inclusive environment in which we recognize and value each other's differences as well as fostering a culture that promotes its core values: Professionalism, Integrity, and Respect. As an equal opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, or status as a protected veteran. Hourly $44.03 USD #VETS * Benefits include the following: * Healthcare coverage * Retirement plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays * Learning and Development resources * Employee assistance resources * Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

The Aircraft Mechanic performs organizational, intermediate, and limited depot-level maintenance including inspection, operational test, repair, modification, routine daily, and periodic servicing, and troubleshooting on F-15 B/D, F-16 aircraft, aircraft systems, components, and equipment. Additionally, ensures flight readiness and supports and executes launch and recovery operations. Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance, and instruction to other employees as needed. QUALIFICATIONS: 3-5 years of experience in Aircraft Maintenance with F-15, and F-16 (F-22 experience will be considered). Experience maintaining other military fighters and FAA aircraft is a plus. Possess a high degree of aircraft systems expertise and be able to demonstrate in-depth knowledge of applicable maintenance/technical manuals, publications, instructions, special tools, test equipment, and troubleshooting skills. Be familiar with operational capabilities and limitations of aircraft systems and be able to maintain and service all aircraft main, auxiliary, secondary power systems, fuel systems, engine level and bleed air components. Able to read and interpret blueprints, technical directives, planning documents, test specifications, technical publications and procedures, and applicable safety manuals. Must be customer-oriented. Plane Captain / Crew Chief certified IAW / Government approved certification program for a minimum of one 1 T/M/S aircraft is highly desired. Physical Demands: This maintenance classification activity is usually accomplished in a flight line-like environment with extensive climbing, standing, stooping, bending, pushing, kneeling, stretching, and walking demands. May require lifting of objects whose weight will not normally exceed 50lbs. Special vision abilities required to perform this job are close and peripheral vision and acceptable depth perception. Work Environment: The diversity of working conditions ranges from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject the individual to severe changes in temperature, wind, rain, etc. May be required to work in areas where high noise hazards, exposure to fumes, airborne particles, and electrical shock hazards exist. REQUIREMENTS: FAA Airframe and Power Plant (A&P) License or able to obtain within 1 year of hire U.S. Citizenship and Valid U.S. Passport Valid State Driver's License High School Diploma or GED Ability to travel Must obtain basic hand tools and toolbox within three (3) months of hire. US Secret Clearance: Active Current a plus, able to obtain and maintain - Required Vertex is committed to building a diverse and inclusive environment in which we recognize and value each other's differences as well as fostering a culture that promotes its core values: Professionalism, Integrity, and Respect. As an equal opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, or status as a protected veteran. Hourly $44.03 USD #VETS Benefits include the following: Healthcare coverage Retirement plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

Scaled Composites is seeking an Airframe and Power Plant (A&P) Mechanic 2 & 3 to join our team of qualified, diverse individuals. As an A&P Mechanic at Scaled Composites, you will play a pivotal role in ensuring the airworthiness and safety of our innovative aerospace projects. This position involves conducting rigorous inspections, adhering to strict regulatory standards to meticulously assess and approve maintenance and repair activities. You will collaborate closely with various teams, providing technical expertise to uphold the highest quality standards in aircraft maintenance. Your responsibilities include examining aircraft structures, systems, and components, overseeing preventive maintenance, and maintaining detailed records to ensure compliance with aviation regulations. This role demands a highly skilled and certified A&P Mechanic with attention to detail and a commitment to upholding the standards set by the Federal Aviation Administration (FAA) for airworthiness and safety. Category: Manufacturing Location: Mojave, CA Citizenship Required: United States Citizenship Clearance Type: Secret Schedule: 9/80 Work Schedule Relocation Assistance: Relocation assistance may be available Benefits: 100% Paid Benefits and 401k Matching Summary: Founded by legendary aircraft designer Burt Rutan, Scaled Composites is a 42-year-old aerospace company continually working to push boundaries, prove out ideas, and influence the future. We are a rapid prototyping and manufacturing facility, designing, building, and testing proof-of-concept and prototype vehicles. We have flown an average of one new aircraft type per year over our 41-year history such as Proteus, GlobalFlyer, SpaceShipOne, Model 401, and Stratolaunch. Duties and Responsibilities may include, but are not limited to : Executes both scheduled and unscheduled maintenance operations on aircraft, encompassing meticulous inspections, repairs, and troubleshooting activities. Conducts thorough inspections of aircraft systems, components, and structures to identify any issues or potential problems. Diagnoses and repair electrical, mechanical, and hydraulic systems. Ensures proper working condition of mechanical systems before flight. Maintains meticulous records of maintenance, repairs, inspections, and any reports related to parts or services. Performs detailed inspections on engines, wings, propellers, tails, and other aircraft parts to detect and address issues such as cracks, corrosion, or defects. Consults maintenance manuals and specifications to identify correct operations and specifications for replacements or repairs. Ensures proper function of engines and operating systems via a variety of tests and tools. Identifies and resolve mechanical problems based on visual inspections or reports from pilot or crew. Handles the fabrication, assembly, installation, and testing of aircraft systems parts, sub-assemblies, and assemblies, including hydraulic, pneumatic, oxygen, fuel, aircraft tube fabrication, flight control, and landing gear components, often with minimal supervision. Operates ground testing and support equipment with precision, adhering to established standards such as AC 43-13, technical manuals, blueprints, or sketches for acceptable systems installation methods, techniques, and practices. Required Skills and Qualifications: High school diploma or equivalent. Two or more years of aircraft mechanical maintenance experience. Valid A&P License. Valid Drivers License. Comprehensive knowledge of procedures for completing FAA paperwork including FAR's, FAA Orders, Advisory Circulars, Form 337, Form 8130-3, Form 8110, STC's and other pertinent paperwork. Demonstrates a high level of expertise in deciphering and interpreting technical manuals, blueprints, and schematics. Ability to work autonomously and collaboratively within a dynamic and fast-paced work environment. Proficiency in the use of measuring tools such as scales, calipers , and micrometers. Experience in the use of fabrication equipment (grinders, jig saws, skill saws, drills, band saws, disc grinders, table saws, drill presses, planers, tube benders and cable swaggers). Demonstrates adaptability to configuration changes in the research and development environment. Experience with reciprocating and turbine aircraft. Excellent verbal and written communication skills. Ability to obtain and maintain a DoD Secret security clearance. Must submit SF-86 paperwork within the first 90 days of employment. The ability to work additional hours as program required. Preferred Qualifications: Experience working on experimental or home built aircraft Flight line or flight test experience Machine shop experience Previous or current DOD Security Clearance IA (Inspection Authorization) Essential Functions: Occasional lifting 50+ lbs. Must have sufficient agility to work in the interior of an aircraft structure. Will need to bend, stoop, squat, and/or kneel to occasionally work in cramped, tiring, and uncomfortable positions. Ability to work overhead for prolonged periods of time including lifting up to 10-15 pounds. Standing 95% of the day, sometimes 8.5 - 12 hours per day. Required to wear appropriate Personal Protective Equipment for an assigned task. Work with composite materials such as epoxy resin systems, fiberglass, carbon fiber, and foam/core products. Will also work closely with chemicals, such as acetone and alcohol. May be exposed to dirt, oil, fuel, grease, and hydraulic fluids. Able to adapt to altered schedules. Occasional pushing/pulling of heavy tools and tables (75-100 + lbs., with assistance). Manual dexterity to handle small parts, and tools and to manipulate composite material to various shapes using pressure. Repetitive hand and arm motions including, but not limited to, trimming, sanding, and/or grinding of materials. Occasional sitting computer work Vision at close distances and ability to adjust focus. Ability to operate a forklift and/or other heavy machinery including occasional driving of company-owned vehicles. Must be able to pass and maintain ‘pass' status on OSHA-approved Pulmonary Fitness Test (PFT) in order to wear a respirator for prolonged periods of time. Work on varied work surfaces/environments, including but not limited to working in a busy shop environment, cold room, or in/on aircraft structures including raised platforms including but not limited to ladders, scaffolding, and stairs. Work may be performed inside or outside of buildings. May be exposed to changing weather conditions. Must be able to read and understand SDS.

Calspan is the premier independent provider of testing and technology development services, solutions, and systems in the aerospace, defense, and automotive industries. Our diverse skill set and unique testing capabilities help innovators push the limits of technology to transform the future. We are seeking a Senior Technician (F-16/X-62) to be esponsible for performing electrical and technical support on a VISTA X-62/F-16 aircraft at our Edwards Airforce Base location. This includes operating and maintaining core F-16 avionics, communications, flight controls, radar, electrical, and VISTA-specific systems. Every single thing we do with our customers and employees is based upon our goal of being selective to join and difficult to leave. We operate with a core set of values surrounding inclusiveness, accountability and innovation. Do you have what it takes to Be Calspan? Responsibilities Perform inspections, system troubleshooting, repairs, and tests to aircraft avionic, electrical, and modified equipment on and off aircraft. Fabricate and/or modify electronic enclosures, panels, circuit boards and wire harnesses per aircraft drawings or engineering notes. Verify new equipment, wire/harness, connectors, back shells meet design requirements and F-16/X-62 specific requirements. Support engineering during aircraft system testing, insure safety standards are met for both aircraft systems and engineer personnel. Provide technical assistance when electrical or engineering problems are encountered during and after testing. Follow established quality assurance procedures with regard to all work performed on the VISTA X-62A aircraft. Support aircrew during aircraft launch and during aircrew ground test procedures. Assist aircrew during debrief and insure correct identification of problems for correct troubleshooting directions. Qualifications Preferred Education/Experience: F-16 electrical/avionic technician 7 level certification; Seven (7) + years in aircraft electrical, avionics, radar, communications; A combination of education and experience equivalent to above. Preferred Knowledge/Ability: Fly-by-wire aircraft; Troubleshooting various F-16 problems; Hydraulic and pneumatic principles; Digital “Fly-By-Wire” flight control principles; Electrical and electronic principles; Perform operations and execute test procedures for engineering, scientific, or real-time data acquisition; Demonstrated ability to read and interpret wiring diagrams and schematics; Read and interpret engineering plans and specifications; Ability to travel. Why join Calspan? Be Calspan Culture At Calspan, we promote an environment that empowers employees and encourages innovation. Our management team enables a strong sense of teamwork with each endeavor, where successes are shared and lessons are learned. The company's talent brand, “Be Calspan”, incorporates our company values to Be Inclusive, Accountable, and Innovative, and our commitment to drive every individual to Be Developed, Be Balanced, Be Connected, Be Community, and Be Recognized. Our culture fosters a positive atmosphere and a competitive, can-do approach to action. Great Benefits Happy, Committed Employees Retaining great talent is as important as finding it, so at Calspan, we take our employee value proposition of Be Calspan quite seriously. To us, that means offering competitive compensation, comprehensive benefits, recognition programs, and opportunities for advancement. Our benefits include: Health Insurance, Health Savings Accounts, Flexible Spending Accounts, Dental Insurance, Vision Insurance, Life Insurance/Accidental Death & Dismemberment, Short-Term/Long-Term Disability, 401(k), Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Universal Life Insurance Policy, Paid-Time Off, Company-paid Holidays, Bereavement Leave, Jury Duty, Military Leave, Employee Assistance Program, Educational Assistance Reimbursement, and Pet Insurance. The salary range provided is a general guideline. Actual pay will depend on several factors, including, but not limited to, education, experience, training, and other applicable qualifications. Calspan is committed to pay transparency in compliance with applicable state and local laws. Calspan is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Calspan supports a safe and drug-free workplace through pre-employment background checks and drug testing. All candidates must be eligible to work in the United States. Salary Range (min) USD $45.00/Yr. Salary Range (max) USD $60.00/Yr.

Before you apply to a job, select your language preference from the options available at the top right of this page. Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. Job Description: This position performs aircraft maintenance on UPS fleet to meet or exceed airworthiness standards. Performs the change, removal, replacement, or upgrade of aircraft components to correct failures or implement changes. Conducts troubleshooting of complex pneumatic, hydraulic, engine, and structural components and systems. This position documents procedures per established processes to ensure regulatory compliance. Job Responsibilities Responsible for the maintenance and preventive maintenance of aircraft Operate and maintain UPS equipment safely Run, taxi, and tow aircraft for the purpose of maintenance and repositioning of aircraft as trained and qualified to do so Determines airworthiness of aircraft and components, in accordance with established procedure and Federal Aviation Regulation Completes aircraft maintenance forms entries and enters data into a Maintenance Data Systems, ensures entries are accurate and complete Services and inspects aircraft, components, and related equipment Ensure consistent, accurate aircraft maintenance by properly completing turnover entries on unfinished maintenance in the turnover log Follow all Maintenance Department policies and procedures Keep a clean and orderly work environment Make recommendations to improve functions within the Maintenance Department Attend UPS assigned training Perform other duties as assigned by Line Maintenance Supervisor or the Director of Maintenance Required Qualifications Must have a High School Diploma or GED equivalent Must have a valid FAA Airframe and Powerplant license Must have a valid driver's license Must have a minimum of three (3) years aircraft maintenance experience that could include but not limited to: Boeing, Airbus and/or McDonnell Douglas aircraft Military jet aircraft Regional /Commuter aircraft Knowledge of computer systems Troubleshooting skills and ability to read and interpret Aircraft Manuals and Illustrated Parts Catalogues Federal Aviation Administration required Drug Testing Information (FAA): As part of the UPS pre-employment process for a safety sensitive position, a drug screen is required. UPS Must receive a negative test result before you can be put into a safety sensitive position (14 CFR Part 120.107). Please be advised that you will be tested in accordance with 14 CFR Part 120.109(a)(5) and 14 CFR 120 Subpart E to determine the presence of marijuana, cocaine, opiates (including codeine, heroin-6AM, morphine), opioids-hydrocodone, hydromorphone, oxycodone & oxymorphone, phencyclidine (PCP), and amphetamines/methamphetamines (including MDMA, MDA) or metabolites of these drugs. Starting Pay: $30.13 Benefits: Competitive weekly pay Medical, dental, and vision after waiting period Defined-benefit pension plan 401(k) Paid vacation Paid holidays Paid Sick and Family and Medical Leave time as required by law Discounted Employee Stock Purchase Program Employee Assistance Program *This job post is for BUR gateway only* Employee Type: Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. Basic Qualifications: Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer. Pay Range: For this union-represented posting, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. The starting pay rate for this position starts at $30.13/hr. The company offers the following benefits for this position, subject to applicable eligibility requirements. Weekly pay, extensive training, growth opportunities, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, education assistance program, discounted employee stock purchase program.

Calspan is the premier independent provider of testing and technology development services, solutions, and systems in the aerospace, defense, and automotive industries. Our diverse skill set and unique testing capabilities help innovators push the limits of technology to transform the future. We are seeking a Senior Technician (F-16/X-62) to be esponsible for performing electrical and technical support on a VISTA X-62/F-16 aircraft at our Edwards Airforce Base location. This includes operating and maintaining core F-16 avionics, communications, flight controls, radar, electrical, and VISTA-specific systems. Every single thing we do with our customers and employees is based upon our goal of being selective to join and difficult to leave. We operate with a core set of values surrounding inclusiveness, accountability and innovation. Do you have what it takes to Be Calspan? Responsibilities Perform inspections, system troubleshooting, repairs, and tests to aircraft avionic, electrical, and modified equipment on and off aircraft. Fabricate and/or modify electronic enclosures, panels, circuit boards and wire harnesses per aircraft drawings or engineering notes. Verify new equipment, wire/harness, connectors, back shells meet design requirements and F-16/X-62 specific requirements. Support engineering during aircraft system testing, insure safety standards are met for both aircraft systems and engineer personnel. Provide technical assistance when electrical or engineering problems are encountered during and after testing. Follow established quality assurance procedures with regard to all work performed on the VISTA X-62A aircraft. Support aircrew during aircraft launch and during aircrew ground test procedures. Assist aircrew during debrief and insure correct identification of problems for correct troubleshooting directions. Qualifications Preferred Education/Experience: F-16 electrical/avionic technician 7 level certification; Seven (7) + years in aircraft electrical, avionics, radar, communications; A combination of education and experience equivalent to above. Preferred Knowledge/Ability: Fly-by-wire aircraft; Troubleshooting various F-16 problems; Hydraulic and pneumatic principles; Digital “Fly-By-Wire” flight control principles; Electrical and electronic principles; Perform operations and execute test procedures for engineering, scientific, or real-time data acquisition; Demonstrated ability to read and interpret wiring diagrams and schematics; Read and interpret engineering plans and specifications; Ability to travel. Why join Calspan? Be Calspan Culture At Calspan, we promote an environment that empowers employees and encourages innovation. Our management team enables a strong sense of teamwork with each endeavor, where successes are shared and lessons are learned. The company's talent brand, “Be Calspan”, incorporates our company values to Be Inclusive, Accountable, and Innovative, and our commitment to drive every individual to Be Developed, Be Balanced, Be Connected, Be Community, and Be Recognized. Our culture fosters a positive atmosphere and a competitive, can-do approach to action. Great Benefits Happy, Committed Employees Retaining great talent is as important as finding it, so at Calspan, we take our employee value proposition of Be Calspan quite seriously. To us, that means offering competitive compensation, comprehensive benefits, recognition programs, and opportunities for advancement. Our benefits include: Health Insurance, Health Savings Accounts, Flexible Spending Accounts, Dental Insurance, Vision Insurance, Life Insurance/Accidental Death & Dismemberment, Short-Term/Long-Term Disability, 401(k), Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Universal Life Insurance Policy, Paid-Time Off, Company-paid Holidays, Bereavement Leave, Jury Duty, Military Leave, Employee Assistance Program, Educational Assistance Reimbursement, and Pet Insurance. The salary range provided is a general guideline. Actual pay will depend on several factors, including, but not limited to, education, experience, training, and other applicable qualifications. Calspan is committed to pay transparency in compliance with applicable state and local laws. Calspan is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Calspan supports a safe and drug-free workplace through pre-employment background checks and drug testing. All candidates must be eligible to work in the United States. Salary Range (min) USD $45.00/Yr. Salary Range (max) USD $60.00/Yr.

Ameriflight, LLC is the nation's largest Part 135 Cargo airline and the unparalleled leader in scalable, outsourced aviation services to the regional express airfreight market. We operate over 150 dedicated cargo aircraft, including the Saab 340B, Embraer 120, Fairchild SA227, Beechcraft 1900, and Beech 99 from bases across the United States. Benefits Ameriflight strives to provide our employees with a good work-life balance and are constantly working to improve our benefits $24.50 - $42.50 per hour depending on experience and shift Opportunity for growth and promotion Medical, Dental, and Vision benefits Company provided Life Insurance 401K with company match Vacation Basic Duties Ameriflight mechanics work on aircraft from nose to tail, which means they are able to gain unique expertise that cannot be found anywhere else. Perform all manner of maintenance on company aircraft in accordance with company policy, manufacturer's recommendations and Federal Aviation Regulations. Inspect, troubleshoot and repair airframe and powerplant components and systems Document work completed per company procedures and Federal Aviation Regulations Maintain a clean and safe work area May travel for training, to repair aircraft in the field, and to provide temporary support for other bases Other duties as assigned Experience Previous experience with Beechcraft 99 and B1900, Embraer EMB-120, Fairchild SA227, Saab 340B aircraft is preferred Previous experience with GE T700/CT7, PT6A, PW118 and TPE331 series powerplants preferred Experience within a fast-paced, scheduled maintenance operation Requirements Must hold a valid FAA Aircraft Mechanic certificate with Airframe & Powerplant ratings Must be at least 18 years of age Must be eligible to work in the U.S. without visa sponsorship Must be able to read, write, speak, and understand English and be able to communicate effectively with other employees Must be able to interpret documents such as policy, repair and safety manuals Must meet airport badging requirements, including a TSA Security background check Successful completion of pre-employment required DOT drug screening and other required background checks Must have and maintain a valid Driver's License and meet all company insurance criteria Must be able to work various shifts Physical Requirements Frequently required to sit, stand, walk, use hands to manipulate objects, reach, climb, balance, stoop, kneel, crouch, or crawl Must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 75 pounds Ability to perform repetitive tasks Work Environment May work outdoors, in weather as necessary May work near moving aircraft and machinery May work in a potentially noisy work environment All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We have an exciting opportunity at our Palmdale, CA facility for an entry level A&P Mechanic where under close supervision, this position is responsible for providing flight line and ground support. Troubleshoots, repairs, and services aircraft and/or engine systems to determine related problems. This position will also support CONUS and OCONUS deployments but is not a FLEX position. DUTIES AND RESPONSIBILITIES: Provides technical assistance/oversight to customers in mechanical and inspection work. Assist in the performance of scheduled and unscheduled aircraft maintenance. Assist in the inspection of powerplant and related components at regular intervals Assist in the repair of fuel leaks, oil leaks, and engine problems. Assist in the removal and replacement of airframe and/or engine components. Complete all required documentation in accordance with established company procedures and/or government and customer technical order requirements. May perform all launch and recovery tasks of aircraft to include ground operations, preflight items, ground observer responsibilities, and post flight items. May participate in the performance of engine and airframe operational checks and installation of payloads. May participate in the performance of Acceptance Test Procedures (ATP) in accordance with company and customer guidelines. May inspect, test, maintain, and operate ground support equipment. Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices. Other duties as assigned or required. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply. Typically requires a high school diploma or equivalent and five or more years of aircraft mechanical maintenance experience. An FAA Airframe and Powerplant License may be required. May require extensive travel and/or CONUS or OCONUS deployment. Must demonstrate sound decision making skills and the ability to anticipate work-related constraints and resolve issues independently. Must be self-directed in identifying work assignments and able to solicit input and guidance from supervisors and managers for technical expertise. Must also possess: Considerable knowledge of the job and a broad understanding of the detailed aspects of the job and the product. Knowledge of relevant computer applications and operations; Strong interpersonal skills to communicate with employees and both military and civilian customers; and strong leadership, organization, and planning skills. The ability to obtain and maintain a DOD security clearance may be required. Must be able to work both independently and on a team and be able to work extended hours as required.

Job Description This Is How We Fly At JSX, we're not just a lifestyle carrier - we're a lifestyle employer. Here, entrepreneurship meets determination, and excellence is our standard. We believe that the journey is just as important as the destination, and every day, we strive to create a Joyful, Simple eXperience for our Customers. Join us, and find your runway to growth, innovation, and success. About the Role: As an Aircraft Maintenance Technician, you play a critical role in ensuring the safety, reliability, and performance of our aircraft fleet. You will be responsible for performing both scheduled and unscheduled maintenance in full compliance with FAA regulations, company policies, and manufacturer maintenance manuals. Your work directly supports our mission to provide safe and efficient air travel while maintaining the highest standards of operational excellence. A Day in the Life: Your day will be dynamic and hands-on, centered around ensuring every aircraft is flight-ready and impeccably maintained. Typical responsibilities include: Pre-Flight Inspections: Start your day by “waking up” the aircraft, conducting thorough pre-flight checks to ensure all systems are fully operational after takeoff. Post-Flight Inspections: After each flight, you will perform detailed post-flight evaluations to identify and address any issues or wear that may have occurred. Maintenance Logging: All maintenance activities-whether scheduled or unscheduled-are documented in Traxxall and properly signed off in aircraft logbooks, ensuring full traceability and compliance. Hangar Maintenance: You'll help maintain a clean, organized, and safe working environment in the hangar. Why You'll Love This Role: Be Part of a Team That Values You: Join a tight-knit, supportive team of professionals who are passionate about aviation and committed to safety and excellence. No Two Days Are the Same: From troubleshooting to routine checks, you'll enjoy a fast-paced, engaging work environment. Make a Tangible Impact: Your attention to detail and technical expertise directly contribute to flight safety and an exceptional Customer experience. Opportunities to Grow: We're invested in your long-term success, offering ongoing training, certifications, and a clear path to advance your career. What Makes a Successful Aircraft Maintenance Technician? We're looking for someone who is: Critical Thinker: You can quickly assess situations and make sound, safety-first decisions. Detail-Oriented: You understand that precision matters - especially when it comes to aircraft performance. Collaborative: You work well across departments, valuing communication and teamwork to achieve common goals. Organized: You can effectively manage tasks and prioritize under tight timelines without missing a step. Proactive: You don't just react - you anticipate issues and take the initiative to address them after they escalate. Entrepreneurial Spirit: You bring energy, ownership, and creativity to your role, always looking for ways to improve processes and elevate the Customer experience. Required Experience: High school diploma/GED Ability to occasionally lift 75+ pounds Ability to perform intermittent physical activity including bending, reaching, and prolonged periods of standing. Available to work flexible shifts including early mornings, late nights, holidays, and weekends. Participation in initial and random drug and alcohol screenings in accordance with the DOT and FAA guidelines. Ability to operate forklift, boom lift, scissor lift, etc. Ability to taxi and engine run an airplane. Must procure own tool set. Preferred Experience: Prior aircraft maintenance experience. Experience working with AMM, IPC, FIM, etc. for troubleshooting references. Skills, Licenses, & Certifications: Current and valid Driver's license required. Current and valid Airframe and Powerplant Certificate required. Ability to operate in time critical situation with strong attention to detail. Pay & Perks: Compensation is $37-$52/hour. This was established after performing market research and is aligned with our approach to compensation. Health Benefits: New Crewmember's become eligible for coverage on the 1st of the month following the start date, with medical plans beginning at just $110/month. 100% employer paid dental & vision, plus up to $2,100 annually for HSA contribution. Short-term and long-term disability coverage at no cost. Travel Benefits: Enjoy free non-revenue standby travel on JSX, plus deeply discounted standby travel other major domestic & international airlines for you and your qualifying immediate family. 401(k) match: 50% of your first 8% Generous PTO: Take time to recharge with our flexible PTO plan. Additional Information: May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (emergencies, changes in workload, rush jobs, technical developments, etc). JSX seeks to provide equality of opportunity in all aspects of employment, as well as to ensure that all personnel activities, such as the recruitment, selection, training, compensation, benefits, discipline, promotion, transfer, layoff and termination processes remain free of illegal discrimination and harassment based upon race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, disability status, or any other characteristic protected by law. Ready to soar with us? Join JSX, where every day is a chance to be part of something eXtraordinary!

This Is How We Fly At JSX, we're not just a lifestyle carrier - we're a lifestyle employer. Here, entrepreneurship meets determination, and excellence is our standard. We believe that the journey is just as important as the destination, and every day, we strive to create a Joyful, Simple eXperience for our Customers. Join us, and find your runway to growth, innovation, and success. About the Role: As an Aircraft Maintenance Technician, you play a critical role in ensuring the safety, reliability, and performance of our aircraft fleet. You will be responsible for performing both scheduled and unscheduled maintenance in full compliance with FAA regulations, company policies, and manufacturer maintenance manuals. Your work directly supports our mission to provide safe and efficient air travel while maintaining the highest standards of operational excellence. A Day in the Life: Your day will be dynamic and hands-on, centered around ensuring every aircraft is flight-ready and impeccably maintained. Typical responsibilities include: Pre-Flight Inspections: Start your day by “waking up” the aircraft, conducting thorough pre-flight checks to ensure all systems are fully operational before takeoff. Post-Flight Inspections: After each flight, you will perform detailed post-flight evaluations to identify and address any issues or wear that may have occurred. Maintenance Logging: All maintenance activities-whether scheduled or unscheduled-are documented in Traxxall and properly signed off in aircraft logbooks, ensuring full traceability and compliance. Hangar Maintenance: You'll help maintain a clean, organized, and safe working environment in the hangar. Why You'll Love This Role: Be Part of a Team That Values You: Join a tight-knit, supportive team of professionals who are passionate about aviation and committed to safety and excellence. No Two Days Are the Same: From troubleshooting to routine checks, you'll enjoy a fast-paced, engaging work environment. Make a Tangible Impact: Your attention to detail and technical expertise directly contribute to flight safety and an exceptional Customer experience. Opportunities to Grow: We're invested in your long-term success, offering ongoing training, certifications, and a clear path to advance your career. What Makes a Successful Aircraft Maintenance Technician? We're looking for someone who is: Critical Thinker: You can quickly assess situations and make sound, safety-first decisions. Detail-Oriented: You understand that precision matters - especially when it comes to aircraft performance. Collaborative: You work well across departments, valuing communication and teamwork to achieve common goals. Organized: You can effectively manage tasks and prioritize under tight timelines without missing a step. Proactive: You don't just react - you anticipate issues and take the initiative to address them before they escalate. Entrepreneurial Spirit: You bring energy, ownership, and creativity to your role, always looking for ways to improve processes and elevate the Customer experience. Required Experience: High school diploma/GED Ability to occasionally lift 75+ pounds Ability to perform intermittent physical activity including bending, reaching, and prolonged periods of standing. Available to work flexible shifts including early mornings, late nights, holidays, and weekends. Participation in initial and random drug and alcohol screenings in accordance with the DOT and FAA guidelines. Ability to operate forklift, boom lift, scissor lift, etc. Ability to taxi and engine run an airplane. Must procure own tool set. Preferred Experience: Prior aircraft maintenance experience. Experience working with AMM, IPC, FIM, etc. for troubleshooting references. Skills, Licenses, & Certifications: Current and valid Driver's license required. Current and valid Airframe and Powerplant Certificate required. Ability to operate in time critical situation with strong attention to detail. Pay & Perks: Compensation is $37-$52/hour. This was established after performing market research and is aligned with our approach to compensation. Health Benefits: New Crewmember's become eligible for coverage on the 1st of the month following the start date, with medical plans beginning at just $110/month. 100% employer paid dental & vision, plus up to $2,100 annually for HSA contribution. Short-term and long-term disability coverage at no cost. Travel Benefits: Enjoy free non-revenue standby travel on JSX, plus deeply discounted standby travel other major domestic & international airlines for you and your qualifying immediate family. 401(k) match: 50% of your first 8% Generous PTO: Take time to recharge with our flexible PTO plan. Additional Information: May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (emergencies, changes in workload, rush jobs, technical developments, etc). JSX seeks to provide equality of opportunity in all aspects of employment, as well as to ensure that all personnel activities, such as the recruitment, selection, training, compensation, benefits, discipline, promotion, transfer, layoff and termination processes remain free of illegal discrimination and harassment based upon race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, disability status, or any other characteristic protected by law. Ready to soar with us? Join JSX, where every day is a chance to be part of something eXtraordinary!

Los Angles, CA Area United States Compensation: Up to $55/hour + Sign-on bonus available Our client is currently seeking an experienced Aircraft Maintenance Technician with strong troubleshooting skills. The Aircraft Maintenance Technician reports to the Aircraft Maintenance Supervisor and is responsible for the efficient execution of the work scope and for the maintenance, preventive maintenance, and alterations performed. 2 - 5+ years of Corporate/Business Jet experience required ** CLIENT IS CURRENTLY ACCEPTING CANDIDATES WITH OVER 6 MONTHS OF EXPERIENCE WORKING ON CORPORATE JET LINES OF AIRCRAFT ** Key Requirement: Must have maintenance experience on one or more of the following brands of aircrafts (corporate jet lines of aircraft only): Gulfstream, Dassault, Learjet, Bombardier, Cessna Hiring for 3 openings: 1 for day shift, 1 for swing shift and another one for weekend shift. Morning Shift [Monday through Friday] Swing Shift [2pm to 11pm Monday through Friday] Weekend Shift [10 hours shift - Friday through Monday] Skills and Abilities Able to effectively communicate with management, peers, and external parties Ability to prioritize and organize workflow Excellent verbal and written communication skills Able to multi-task Known for working well with all levels of managers, staff, clients, and vendors Able to handle sensitive documents in a very confidential manner Responsibilities Performs maintenance and alteration of articles as directed Uses current, applicable technical data Adheres to all company and OSHA regulated policies and procedures Maintains outstanding attendance record Adheres and promotes the Clay Lacy Vision, Mission and Values daily Maintain proficiency with tools, techniques, and acceptable practices used to perform maintenance and alteration duties. Documenting all work performed including references to technical data used on work order squawk form and other forms as required Documenting all parts and/or equipment removed from or installed on aircraft on the removal and installation forms Ensuring material has been properly received prior to installation on aircraft Verify material shelf life has not expired prior to use Verify calibrated tooling calibration due date and condition prior to use Document identified discrepancies on Discrepancy Collection Form Do not deviate from technical data unless appropriate approvals are obtained Promote an efficient and professional work Participates in Continuous Improvement projects as directed Needs to be available to work different shifts and weekends as requested Able to travel away from the primary facility for training and work Perform other duties as assigned Education A&P Certificate required Experience 2 - 5+ years of Corporate/Business Jet experience Equal Opportunity Employer In compliance with the Americans with Disabilities Act, the company provides reasonable accommodation to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer. All applicants must submit to a pre-employment drug screen and background check. Client offers an excellent benefits package including medical, dental, vision, matching 401(K) and more to employees in full-time positions.

Impact Recruitment is looking for a talented, motivated, and driven Aircraft Maintenance Technician/ Lead for a stable and well respected client with locations in Southern California. This position will focus on a variety of corporate jet aircraft; including, but not limited to: Dassault (Falcon), Gulfstream, Bombardier (Global/Challenger), Hawker, and Cessna (Citation). Focused on creating inspired careers, our client offers excellent opportunities for career growth and professional development within their organization. Key Responsibilities: Supervises a crew of technicians (5 - 12 crew members) in the performance of aircraft maintenance. Evaluates, recommends salary and promotions, rewards, recognizes and disciplines members of the crew. Assures that technicians are held accountable for the quality of their maintenance work, and that they perform their duties in accordance with FAA regulations, manufacturers' recommendations, the company repair station manual, as well as company policies and procedures. Assigns work to crew members based upon customer expectations for return to service date and the technical expertise of the various employees. Provides technical guidance to technicians to aid in performance of aircraft maintenance, service bulletins, airworthiness directives, and modifications. Must be up-to-date on scope of required maintenance for customers and coordinate efforts to ensure an on time delivery. With the facility general manager, pre-plans work scopes on aircraft, including deploying manpower, pre-ordering parts, opening the work order and customer debriefing. Writes all additional items and squawks communicated by customer or identified during inspection. Monitors hours charged to a job to assure that manpower is optimized and efficiency is maintained to meet or exceed customers expectations. Reviews employee time cards on a daily basis to verify accuracy of time charged to work orders as well as performance relative to quoted hours. Informs facility general manager of problems and work status so that communications with the customers are timely and complete. Reviews work orders for completion and invoice for accuracy prior to submission to the general manager. Ensures work orders are in accordance with our repair station manual, including RTS functions. Ensures completion of a final “walk around” to confirm aircraft cleanliness and readiness for departure. Assures that crew members are well-trained on assigned aircraft, that they are scheduled for periodic technical training in-house or at designated off-site locations. Works cooperatively with other TAC personnel to assure cross-training on other aircraft models. Supports and adheres to safety, environmental and general housekeeping policies. Is proactive in the area of safety; promotes safe work habits to the crew, monitors the work environment for safety hazards and takes steps to address/remove hazards. Ensures the proper use and maintenance of company facilities and equipment ensuring accuracy and safety. Education and Experience Required: A minimum of 10 years recent experience working on corporate aircraft models typical to the company. A minimum of 2 years recent experience in a supervisory role. Valid Airframe and Powerplant (A&P) license issued by the FAA. Valid California Driver's License. We invite you to consider a career opportunity through Impact Recruitment. Contact us today at ************************** or ************** to learn more about this position and to see whether this is the right career fit for you! Impact Recruitment is an equal opportunity employer. Impact Recruitment does not discriminate in recruitment, hiring, or terms or conditions of employment on the basis of race, sex, color, national origin, sexual orientation, religion, age, disability, medical condition as defined under state law, or any other basis prohibited by applicable federal, state, or local law. Impact Recruitment also provides reasonable accommodations to disabled individuals to assist in the hiring process and to qualified individuals with disabilities in the performance of essential job functions, as required by federal, state, or local law.

We are seeking a highly skilled and motivated B1 Licensed Aircraft Engineer to join our team. In this role, you will be responsible for ensuring the safety, airworthiness, and operational readiness of aircraft. As a B1 Licensed Aircraft Engineer, you will work closely with a team of engineers and technicians, providing technical expertise for the maintenance and repair of aircraft systems, including the structure, engines, and mechanical systems. Your key responsibilities will include troubleshooting, performing routine maintenance, and conducting complex inspections to meet both regulatory standards and our operational excellence. If you are a detail-oriented professional with a passion for aviation, this position offers an exciting opportunity to work in a fast-paced, dynamic environment.Key Responsibilities: Perform scheduled and unscheduled maintenance tasks on aircraft in accordance with company and regulatory guidelines. Troubleshoot and repair aircraft systems, including hydraulic, pneumatic, and mechanical components. Conduct pre-flight and post-flight inspections to ensure aircraft safety and compliance. Diagnose issues and determine the necessary course of action for repairs or replacements. Complete maintenance logs and reports accurately to document all work performed. Work closely with flight crews to ensure the timely and safe return of aircraft to service. Ensure that all tools, equipment, and facilities used in maintenance are kept in good condition and properly calibrated. Supervise and mentor junior maintenance staff and technicians. Liaise with regulatory authorities during inspections and audits. Stay updated on industry regulations and technology advancements. Qualifications: Valid EASA Part 66 B1 License (or equivalent recognized by local aviation authorities). Strong knowledge of aircraft systems, including engines, landing gear, airframes, and associated mechanical and hydraulic systems. Minimum of 3 years of experience working on aircraft maintenance, repairs, or modifications. Experience with both scheduled and unscheduled maintenance. Ability to read and interpret technical manuals, blueprints, and engineering drawings. Excellent troubleshooting and problem-solving skills. Strong attention to detail and commitment to safety. Ability to work in a fast-paced environment with minimal supervision. Excellent communication skills and ability to work as part of a team. Preferred Qualifications: EASA Part 66 B1 License or equivalent qualification (e.g., FAA A&P License, CAA B1 License). Aircraft Type Ratings on relevant aircraft models (e.g., Airbus, Boeing, Bombardier, etc.). Valid Human Factors certification. Current EWIS (Electrical Wiring Interconnection System) certificate. Fuel Tank Safety certification (Level 1 and 2 preferred). Updated training on relevant regulations (Part 145, Part M, etc.). Type ratings on multiple aircraft types. Experience in both line and base maintenance environments. Certification in advanced aircraft systems troubleshooting techniques.

Job DescriptionWe are seeking a highly skilled and motivated B1 Licensed Aircraft Engineer to join our team. In this role, you will be responsible for ensuring the safety, airworthiness, and operational readiness of aircraft. As a B1 Licensed Aircraft Engineer, you will work closely with a team of engineers and technicians, providing technical expertise for the maintenance and repair of aircraft systems, including the structure, engines, and mechanical systems. Your key responsibilities will include troubleshooting, performing routine maintenance, and conducting complex inspections to meet both regulatory standards and our operational excellence. If you are a detail-oriented professional with a passion for aviation, this position offers an exciting opportunity to work in a fast-paced, dynamic environment.Key Responsibilities: Perform scheduled and unscheduled maintenance tasks on aircraft in accordance with company and regulatory guidelines. Troubleshoot and repair aircraft systems, including hydraulic, pneumatic, and mechanical components. Conduct pre-flight and post-flight inspections to ensure aircraft safety and compliance. Diagnose issues and determine the necessary course of action for repairs or replacements. Complete maintenance logs and reports accurately to document all work performed. Work closely with flight crews to ensure the timely and safe return of aircraft to service. Ensure that all tools, equipment, and facilities used in maintenance are kept in good condition and properly calibrated. Supervise and mentor junior maintenance staff and technicians. Liaise with regulatory authorities during inspections and audits. Stay updated on industry regulations and technology advancements. Qualifications: Valid EASA Part 66 B1 License (or equivalent recognized by local aviation authorities). Strong knowledge of aircraft systems, including engines, landing gear, airframes, and associated mechanical and hydraulic systems. Minimum of 3 years of experience working on aircraft maintenance, repairs, or modifications. Experience with both scheduled and unscheduled maintenance. Ability to read and interpret technical manuals, blueprints, and engineering drawings. Excellent troubleshooting and problem-solving skills. Strong attention to detail and commitment to safety. Ability to work in a fast-paced environment with minimal supervision. Excellent communication skills and ability to work as part of a team. Preferred Qualifications: EASA Part 66 B1 License or equivalent qualification (e.g., FAA A&P License, CAA B1 License). Aircraft Type Ratings on relevant aircraft models (e.g., Airbus, Boeing, Bombardier, etc.). Valid Human Factors certification. Current EWIS (Electrical Wiring Interconnection System) certificate. Fuel Tank Safety certification (Level 1 and 2 preferred). Updated training on relevant regulations (Part 145, Part M, etc.). Type ratings on multiple aircraft types. Experience in both line and base maintenance environments. Certification in advanced aircraft systems troubleshooting techniques. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

*This position is a short term employment opportunity, not to exceed 90 days unless approved by program management* Aircraft Mechanic - Perform routine scheduled and unscheduled maintenance to include inspection, operational test, repair, modification and troubleshooting on ER-2 (U-2/TR-2) aircraft, components and equipment. Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance, and instruction to other employees as needed. Candidate to possess a high degree of expertise on aircraft systems. Demonstrates in-depth knowledge of applicable maintenance/technical manuals, publications, instructions, and special tools and test equipment. Must be familiar with operational capabilities and limitations of aircraft systems and be able to maintain all aircraft main, auxiliary, secondary power systems, fuel systems, engine and bleed air components. Perform troubleshooting, testing, replacing or repairing worn or damaged components using hand tools, gauges, and testing equipment; removing the engine from aircraft, disassembling and inspecting parts for wear, cracks, security, or other defects and repairing or replacing defective engine parts and reassembles. Required to read and understand maintenance manuals, CMP, SRM, interpret blueprints, technical directives, planning documents, test specifications, technical publications and procedures, and applicable safety manuals. Must be Customer service-oriented. Physical Demands: This maintenance classification activity is usually accomplished in a flight line-like environment with extensive climbing, standing, stooping, bending, pushing, kneeling, stretching and walking demands. May require lifting of objects whose weight normally will not exceed 50lbs. Special vision abilities required to perform this job are close and peripheral vision and acceptable depth perception. Work Environment: The diversity of working conditions range from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject the individual to severe changes in temperature, wind, rain, etc. May be required to work in areas where high noise hazards, exposure to fumes, airborne particles, and electrical shock hazards exist. Licensing, Certification Requirements: Airframe and Powerplants (A&P) License - Required or able to obtain within one (1) year 5 years fixed-wing, jet engine aircraft maintenance required H/S AND 5 years' experience in ER-2/U-2 aircraft maintenance - preferred U.S. Citizenship - required Valid State Driver's License - required Valid U.S. Passport - ability to obtain and maintain High School Degree or GED - required Ability to travel - required Must obtain basic hand tools and toolbox within three (3) months of hire. Clearance Required: Able to obtain and maintain U.S. Secret As a government contractor, Vertex Aerospace requires all employees to be fully vaccinated as a condition of employment in accordance with Executive Order 14042. Exceptions to this policy are granted on a case-by-case basis for those that request a religious or medical accommodation. A vaccination status form and proof of vaccination, if applicable, is required. Benefits include the following: Healthcare coverage Retirement plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. Hourly Mech $42.34 USD Hourly Tech $43.07 USD #VETS #MAINT

* This position is a short term employment opportunity, not to exceed 90 days unless approved by program management* Aircraft Mechanic - Perform routine scheduled and unscheduled maintenance to include inspection, operational test, repair, modification and troubleshooting on ER-2 (U-2/TR-2) aircraft, components and equipment. Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance, and instruction to other employees as needed. * Candidate to possess a high degree of expertise on aircraft systems. Demonstrates in-depth knowledge of applicable maintenance/technical manuals, publications, instructions, and special tools and test equipment. * Must be familiar with operational capabilities and limitations of aircraft systems and be able to maintain all aircraft main, auxiliary, secondary power systems, fuel systems, engine and bleed air components. * Perform troubleshooting, testing, replacing or repairing worn or damaged components using hand tools, gauges, and testing equipment; removing the engine from aircraft, disassembling and inspecting parts for wear, cracks, security, or other defects and repairing or replacing defective engine parts and reassembles. * Required to read and understand maintenance manuals, CMP, SRM, interpret blueprints, technical directives, planning documents, test specifications, technical publications and procedures, and applicable safety manuals. * Must be Customer service-oriented. Physical Demands: This maintenance classification activity is usually accomplished in a flight line-like environment with extensive climbing, standing, stooping, bending, pushing, kneeling, stretching and walking demands. May require lifting of objects whose weight normally will not exceed 50lbs. Special vision abilities required to perform this job are close and peripheral vision and acceptable depth perception. Work Environment: The diversity of working conditions range from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject the individual to severe changes in temperature, wind, rain, etc. May be required to work in areas where high noise hazards, exposure to fumes, airborne particles, and electrical shock hazards exist. Licensing, Certification Requirements: * Airframe and Powerplants (A&P) License - Required or able to obtain within one (1) year * 5 years fixed-wing, jet engine aircraft maintenance required * H/S AND 5 years' experience in ER-2/U-2 aircraft maintenance - preferred * U.S. Citizenship - required * Valid State Driver's License - required * Valid U.S. Passport - ability to obtain and maintain * High School Degree or GED - required * Ability to travel - required * Must obtain basic hand tools and toolbox within three (3) months of hire. Clearance Required: Able to obtain and maintain U.S. Secret As a government contractor, Vertex Aerospace requires all employees to be fully vaccinated as a condition of employment in accordance with Executive Order 14042. Exceptions to this policy are granted on a case-by-case basis for those that request a religious or medical accommodation. A vaccination status form and proof of vaccination, if applicable, is required. * Benefits include the following: * Healthcare coverage * Retirement plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays * Learning and Development resources * Employee assistance resources * Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. Hourly Mech $42.34 USD Hourly Tech $43.07 USD #VETS #MAINT

***This position is a short term employment opportunity, not to exceed 90 days unless approved by program management*** Aircraft Mechanic - Perform routine scheduled and unscheduled maintenance to include inspection, operational test, repair, modification and troubleshooting on ER-2 (U-2/TR-2) aircraft, components and equipment. Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance, and instruction to other employees as needed. + Candidate to possess a high degree of expertise on aircraft systems. Demonstrates in-depth knowledge of applicable maintenance/technical manuals, publications, instructions, and special tools and test equipment. + Must be familiar with operational capabilities and limitations of aircraft systems and be able to maintain all aircraft main, auxiliary, secondary power systems, fuel systems, engine and bleed air components. + Perform troubleshooting, testing, replacing or repairing worn or damaged components using hand tools, gauges, and testing equipment; removing the engine from aircraft, disassembling and inspecting parts for wear, cracks, security, or other defects and repairing or replacing defective engine parts and reassembles. + Required to read and understand maintenance manuals, CMP, SRM, interpret blueprints, technical directives, planning documents, test specifications, technical publications and procedures, and applicable safety manuals. + Must be Customer service-oriented. **Physical Demands:** This maintenance classification activity is usually accomplished in a flight line-like environment with extensive climbing, standing, stooping, bending, pushing, kneeling, stretching and walking demands. May require lifting of objects whose weight normally will not exceed 50lbs. Special vision abilities required to perform this job are close and peripheral vision and acceptable depth perception. **Work Environment:** The diversity of working conditions range from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject the individual to severe changes in temperature, wind, rain, etc. May be required to work in areas where high noise hazards, exposure to fumes, airborne particles, and electrical shock hazards exist. **Licensing, Certification Requirements:** + Airframe and Powerplants (A&P) License - Required or able to obtain within one (1) year + 5 years fixed-wing, jet engine aircraft maintenance required + H/S AND 5 years' experience in ER-2/U-2 aircraft maintenance - preferred + U.S. Citizenship - required + Valid State Driver's License - required + Valid U.S. Passport - ability to obtain and maintain + High School Degree or GED - required + Ability to travel - required + Must obtain basic hand tools and toolbox within three (3) months of hire. **Clearance Required:** Able to obtain and maintain U.S. Secret As a government contractor, Vertex Aerospace requires all employees to be fully vaccinated as a condition of employment in accordance with Executive Order 14042. Exceptions to this policy are granted on a case-by-case basis for those that request a religious or medical accommodation. A vaccination status form and proof of vaccination, if applicable, is required. + **Benefits include the following:** + Healthcare coverage + Retirement plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources + Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. Hourly Mech $42.34 USD Hourly Tech $43.07 USD \#VETS #MAINT Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Ameriflight, LLC is the nation's largest Part 135 Cargo airline and the unparalleled leader in scalable, outsourced aviation services to the regional express airfreight market. We operate over 150 dedicated cargo aircraft, including the Saab 340B, Embraer 120, Fairchild SA227, Beechcraft 1900, and Beech 99 from bases across the United States. Benefits Ameriflight strives to provide our employees with a good work-life balance and are constantly working to improve our benefits * $24.50 - $42.50 per hour depending on experience and shift * Opportunity for growth and promotion * Medical, Dental, and Vision benefits * Company provided Life Insurance * 401K with company match * Vacation Basic Duties Ameriflight mechanics work on aircraft from nose to tail, which means they are able to gain unique expertise that cannot be found anywhere else. * Perform all manner of maintenance on company aircraft in accordance with company policy, manufacturer's recommendations and Federal Aviation Regulations. * Inspect, troubleshoot and repair airframe and powerplant components and systems * Document work completed per company procedures and Federal Aviation Regulations * Maintain a clean and safe work area * May travel for training, to repair aircraft in the field, and to provide temporary support for other bases * Other duties as assigned Experience * Previous experience with Beechcraft 99 and B1900, Embraer EMB-120, Fairchild SA227, Saab 340B aircraft is preferred * Previous experience with GE T700/CT7, PT6A, PW118 and TPE331 series powerplants preferred * Experience within a fast-paced, scheduled maintenance operation Requirements * Must hold a valid FAA Aircraft Mechanic certificate with Airframe & Powerplant ratings * Must be at least 18 years of age * Must be eligible to work in the U.S. without visa sponsorship * Must be able to read, write, speak, and understand English and be able to communicate effectively with other employees * Must be able to interpret documents such as policy, repair and safety manuals * Must meet airport badging requirements, including a TSA Security background check * Successful completion of pre-employment required DOT drug screening and other required background checks * Must have and maintain a valid Driver's License and meet all company insurance criteria * Must be able to work various shifts Physical Requirements * Frequently required to sit, stand, walk, use hands to manipulate objects, reach, climb, balance, stoop, kneel, crouch, or crawl * Must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 75 pounds * Ability to perform repetitive tasks Work Environment * May work outdoors, in weather as necessary * May work near moving aircraft and machinery * May work in a potentially noisy work environment We are proud to be an Equal Opportunity Employer. Employment decisions are based on merit, qualifications, and business needs without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.