Aircraft mechanic jobs in Madera, CA

Intro Are you ready to explore a world of possibilities, both at work and during your time off? Join our American Airlines family, and you'll travel the world, grow your expertise and become the best version of you. As you embark on a new journey, you'll tackle challenges with flexibility and grace, learning new skills and advancing your career while having the time of your life. Feel free to enrich both your personal and work life and hop on board! Why you'll love this job Responsible for being a key reason why friends, family, and customers of American Airlines fly safely and on time. There are also opportunities for job growth and advancement, training, and working with many of the industry's most talented aviation professionals. Starting pay is $44.06 per hour. What you'll do These are the essential functions of the job This list is intended to reflect the current job but there may be additional essential functions (and non-essential job functions) that are not referenced. Management will modify the job or require other tasks be performed when operationally necessary, observing, of course, any legal obligations including any collective bargaining obligations. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the job, absent undue hardship. Please contact Accommodations@aa.com should you wish to request an accommodation. Technical Functions Service aircraft, including but not limited to, mechanical work involved in the dismantling, disassembly, overhauling, repairing, fabricating, assembling, welding, checking, repairing, replacing, testing, adjusting, installing, and erecting all parts of airplanes required to maintain airworthiness of aircraft and their components Conduct scheduled maintenance inspections Certify for the quality of own workmanship (i.e., that it is in accordance with the proper maintenance manuals and references) Connect/remove ground power and ground start units Push out/tow aircraft and perform guideman functions AMT Work Conditions - General Functions Perform inspections in extreme environmental conditions, including extreme heat (over 100° Fahrenheit), extreme cold (below 32° Fahrenheit), rain, sleet, wind, and snow Perform duties that require general safety awareness (e.g., when working in an area with moving vehicles) Perform duties that require use of personal protective equipment (e.g., wearing fall protection while working at heights, wearing respirators while working around fumes and vapors) Perform duties in conditions that are dirty (e.g., dirt, dust, grime) Perform work in confined, tight, or awkward spaces AMT General Functions Sign mechanical flight releases and/or airworthiness releases Maintain knowledge of and use manuals, supply/parts catalogs, minimum equipment lists, and general maintenance manuals Ensure forms, records, reports, and other work-related paperwork are completed properly Perform Foreign Object Debris (FOD) walks Clean work area Request parts American Airlines General Functions Report to position on time, as scheduled, and at assigned station or location, including varying shifts, weekends, and holidays Perform all functions in accordance with safety procedures and policies Complete job-relevant trainings Adhere to government regulations (e.g., DOT, FAA, TSA) Adhere to company policies, procedures, and performance standards Receive assignments and follow instructions from supervisor or Crew Chief, as applicable Coordinate with other employees and stakeholders in order to accomplish work tasks Wear uniforms as required by company policy Use relevant electronic systems to complete work All you'll need for success Minimum Qualifications- Education & Prior Job Experience High School diploma or GED Valid driver's license Ability to read, write, fluently speak and understand the English language or language native to geographical location. Airframe and Power Plant License required. Must be willing to work outdoors in any weather conditions in accordance with Company Safety Guidelines. Must be willing to work extra hours when there are operational needs, such as weather delays. Ability to work rotating shifts including weekends, holidays, and days off. Reports to work on a regular and timely basis. Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA). Must be able to secure appropriate airport authority and/or US Customs security badges. This job is subject to the Department of Transportation (DOT) drug and alcohol testing. Your previous employers will be contacted to verify if you had any DOT drug violations and/or refusals to test for drugs or alcohol in the previous two-year period. Your DOT required urine specimen will be tested for the following substances: Cocaine, Marijuana, PCP, Amphetamines, and Opiates. Travel to the interview and any subsequent relocation expenses are the responsibility of the candidate. What you'll get Feel free to take advantage of all that American Airlines has to offer: Travel Perks: Ready to explore the world? You, your family and your friends can reach 365 destinations on more than 6,800 daily flights across our global network. Health Benefits: On day one, you'll have access to your health, dental, prescription and vision benefits to help you stay well. And that's just the start, we also offer virtual doctor visits, flexible spending accounts and more. Wellness Programs: We want you to be the best version of yourself - that's why our wellness programs provide you with all the right tools, resources and support you need. 401(k) Program: Available upon hire and, depending on the workgroup, employer contributions to your 401(k) program are available after one year. Additional Benefits: Other great benefits include our Employee Assistance Program, pet insurance and discounts on hotels, cars, cruises and more Feel free to be yourself at American From the team members we hire to the customers we serve, inclusion and diversity are the foundation of the dynamic workforce at American Airlines. Our 20+ Employee Business Resource Groups are focused on connecting our team members to our customers, suppliers, communities and shareholders, helping team members reach their full potential and creating an inclusive work environment to meet and exceed the needs of our diverse world. Are you ready to feel a tremendous sense of pride and satisfaction as you do your part to keep the largest airline in the world running smoothly as we care for people on life's journey? Feel free to be yourself at American.

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits?! Would you like to work with a company that invests in your growth? Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are: As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary. What's in it for YOU: Competitive Pay Rates! 40 hours a week, not flat rate OT as needed over 40 hours Full Benefits: Medical, Vision, Dental, and 401K plan Paid vacation Company provided uniform Corporate partner discount program Career advancement through a national company Duties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components. Perform scheduled preventative maintenance of vehicles Execute major and minor repairs of defective components. Document all activities in MV's Fleet Management System. Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements: High school diploma or equivalent. Combination of at least one (1) to two (2) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program. Must be able to pass a pre-employment drug screen and random drug testing. Starting pay rate: $36.96/hour MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

The Kitchen Mechanic repairs, maintains, and installs a variety of commercial food preparation and serving equipment. This includes, but is not limited to: commercial ovens, ranges, fryers, warmers, proofers, mixers, dishwashers, coolers, freezers, ice machines, and soft-serve ice cream equipment. The Kitchen Mechanic also orders supplies and spar parts as necessary to properly maintain the equipment under his care. Salary Details: $32.22 / hr - $41.48 / hr based on overall experience Responsibilities: Troubleshoots, repairs and maintains a wide variety of commercial restaurant and food preparation equipment such as mixers, slicers, blenders, etc. Repairs and maintains commercial ice makers and ice dispensers. Repairs and maintains commercial dishwashing and ware washing equipment. Repairs and maintains gas and electric grills, ovens, stoves, and ranges. Repairs and maintains commercial soft-serve ice cream machines. Repairs and maintains commercial gas and electric fryers. Repairs and maintains commercial freezers, coolers, cold tables, and refrigerated display cases. Orders and maintains a stock of repair parts as required to facilitate timely repair of kitchen equipment. Maintains all assigned equipment in a safe and functional condition. Completes a variety of maintenance related paperwork, including daily logs, work orders, requisitions, and quotes. Provides technical specifications for the purchase of new and replacement commercial kitchen equipment. Communicates the status of all kitchen equipment and components in both verbal and written formats to Maintenance and Foods management. Reads and interprets equipment schematics for commercial kitchen and serving equipment. Other duties may be assigned. Qualifications: High School Diploma or GED required. At least 5 years' experience in the repair and maintenance of commercial kitchen equipment. At least 3 years' experience with the repair and maintenance of refrigeration equipment such as freezers, coolers, and ice making equipment. At least 2 years' experience with the repair and maintenance of gas or electric cooking equipment such as ranges, ovens, grills, or fryers. Basic electrical troubleshooting skills (including AC and DC motors and controls). Ability to work nights, weekends and holiday periods to meet business needs. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio and percent and to draw and interpret bar graphs. Ability to read, write, speak and understand English at a level sufficient to follow written policies and procedures; complete a variety of basic forms; and interact with guests including understanding and responding to specific questions.

Are you ready to take flight in a dynamic and fast-paced aviation industry? As a global leader in aviation services, Swissport provides Ground Handling, Cargo Handling, and Passenger Services to over 300 million passengers annually. Our mission is simple - "To provide the aviation industry with consistent and tailor-made solutions around the globe, for a better customer experience." We believe that our people are what differentiates us from our competition. At Swissport, we are driven by our core values of Show You Care, Do the Right Things and Win as a Team, and we are currently seeking dedicated individuals, who align with these values, to join our team at various locations across the globe. Job Summary Fleet Mechanic is responsible for service and maintenance, keeping in good order all Ground Service Equipment at a designated station, keeping Swissport Ramp and other service agencies safe with reliable equipment that meets all local and governing laws. The expected pay rate is $33-$43/hr. Full-time employees are offered a range of health and wellness benefits as well as 401(k) with company match paid vacation time, sick time, and company paid holidays. Your activities Operate and drive all types of GSE equipment - motorized and non-motorized. Perform and show competence in preventive maintenance per established schedules on all ground support equipment Provide trouble-shooting and diagnostic assessment of ground support equipment as required Hydraulic knowledge or basics necessary. Must be willing to learn hydraulic systems Airport deicing training will be required. Reporting to work during snow, Ice and cold weather required. Overtime is necessary during weather emergencies Will be working outside in all weather conditions year-round Remove malfunctioning ground support equipment from service and ensure GSE is not returned to service until malfunction has been accurately diagnosed and repaired Respond to emergency service calls as well as accidents involving ground support equipment Complete all maintenance/repair documentation consistent with carrier, station, airport authority, municipal, state, federal and SP requirements Comply with all federal, provincial, municipal, airport authority and carrier security requirements Will retain a motor vehicle driver's license for both air side / non airside in good standing at all times Follow all safety guidelines set out by WCB, EPA, WHIMIS, and SP management Keep GSE shop and its equipment always clean and serviceable, report all deficiencies to management Fuel equipment as necessary with full regard for all safety and environmental requirements Will liaison with Ramp management, customers and staff in a professional manner when needed Work as a self-starter and report to shop leads daily Your profile Valid driver's license Good command of the English language both verbal and written Trade school training and or a mechanical background preferred. Good oral and verbal communication skills Good computer skills. Willing to clean and maintain a safe workshop. Willing to travel when necessary for training or to assist other SP stations with GSE needs as required What we offer 401(k) Dental insurance Health insurance Life insurance Paid time off Retirement plan Tuition reimbursement Vision insurance At Swissport, we believe in diversity, equal opportunity, and the power of our values to drive our success. We are committed to providing a workplace that fosters inclusion and where all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Visit our website at to learn more about Life at Swissport. Join Swissport today and be part of a team that connects the world of aviation!

Summary/Description: Aircraft Mechanics I must have a combination of experience to Inspect MECH I maintenance practices, repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti- icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft Propulsion, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair. May be required to be licensed by Federal Aviation Administration. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Federal Aviation Administration (FAA) licensing of contractor employee technical proficiency is not required. Essential Job Functions: The candidate is required to maintain and service the F/A-18 systems/components as required and in accordance with applicable publications and governing instructions. Applies technical knowledge of rated system principles in determining equipment malfunctions and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mods, and recommends changes to installation specifications to simplify assembly and maintenance. The Aircraft Mechanic I applies technical knowledge to solve airframes system problems by interpreting manufacturer's manuals or similar documents. Required to be qualified on and work with some ground support equipment, special calibration equipment, special tools and all related maintenance manuals, maintenance requirement cards, parts breakdown manuals, technical directives, diagrams, schematics, blueprints and drawings. Member will work on all aircraft systems, beyond the rated Aircraft Mechanic I field of expertise the member will work as a general Aircraft Mechanic I. Qualifications/Requirements: Must have 4 years' CDI/CDQ experience on military aircraft or A&P license. Collateral Duty Inspector Required. Fuel Cell/Entrant qualification and Respirator use will be required. Shift work is required. Must be physically able to perform all assigned duties and able to lift 50lbs. Must be able to read, write, and speak English. You may be required to qualify in additional certifications such as Low Power Engine Turn-Up Operator (LPT), High Power Engine Turn-Up Operator (HPT), Collateral Duty Quality Assurance Representative (CDQAR), and/or Plane Captain. Must have ability to inspect and maintain all company and customer assets, including all assigned Personal Protective Equipment (PPE), in accordance with applicable directives, and ensure that those assets are utilized in a safe, effective and efficient manner. Must have ability to participate in the investigation of any injury and/or the resolution of any problems in quality or performance that may hinder production or be detrimental to the program. Must participate in the training and qualification of new personnel. Must promote communication to enhance and encourage employee awareness of accident prevention, quality of work, and environmental compliance. Must promote positive communication with all site departments, company management, and our customers to ensure the proper execution of our contract. Must participate in required daily, weekly, monthly, quarterly and annual training and ensure that it is documented in a timely manner. Complete initial attendance sheet on a daily basis, verifying your start time and proper accounting of all assigned PPE. Must be cleared and maintain clearance level required. Must be able to obtain and maintain a Tier 3 US Government Clearance. Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location. Salary and Other Compensation: The hourly rate for this position is $44.61 per hour. Plus $8.10 per hour, up to 40 hours per week, for Health & Welfare. Benefits: The Company offers the following benefits for this position, subject to applicable eligibility requirements: medical insurance, dental insurance, vision insurance, 401(k) retirement plan, life insurance, long-term disability insurance, short-term disability insurance, 5.54 hours of paid time off biweekly, and 11 paid holidays annually. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

The Avionics Technician (E-2D) AM II installs, inspects, tests, adjusts, or repairs avionics equipment, such as radar, communications, navigation, and missile control systems in assigned aircraft. Performs tasks independently with little or no supervision. Performs operational checks, bench checks, troubleshoots, and isolates malfunctions in complex aircraft avionics equipment i.e. AN/APY-9 Radar system, various radios UHF/VHF, Intercommunication System (ICS), radar altimeter and IFF and Link 16 systems. Uses complex test equipment such as continuous wave and pulse generators, time domain reflectometers, multi-trace oscilloscopes, frequency counters, multi-meters and deviation meters, and specialized test equipment to perform operational checks. Repairs or replaces components based on test results following blueprints, schematics, handbooks, and other technical documents. Performs calibration, repair and replacement of system components based on test results following blueprints, schematics, handbooks, and other technical documents. Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. Shall have an in-depth working knowledge of the CNAFINST 4790.2 and NAVINST 3710.1 series and all applicable technical publications which apply to their applicable T/M/S specific aircraft. Must be able to prioritize workloads, maintain schedules, and perform other maintenance standards on assigned projects. Shall have authority to direct, mentor, instruct and assist lower classification level employees in proper work methods and performance of their job duties. Shall be able to utilize the OOMA NALCOMIS system in documenting aircraft maintenance actions. Must obtain all certifications required to perform the job requirements. Performs other duties as requested. In-depth knowledge of advanced electronic principles and circuit analysis. Ability to trace signal flow, understand interrelationships of circuits, interpret waveforms and voltages. Working knowledge of aircraft communications/navigation and instrument systems. Ability to interpret schematic diagrams, engineering drawings and charts of assigned systems. Excellent soldering and harness/wiring skills, PC board, surface mount and crimping experience. Working knowledge of all standard test equipment and maintenance procedures. Working knowledge of technical orders and maintenance forms. Must be a U.S. citizen. Must be able to obtain and maintain a flight line driver's license. Ability to read, write, speak, and understand English. Experience and Education: High School degree or equivalent required. Shall have minimum of five years US Navy/USMC/USCG O-Level CNAFINST 4790.2 (series) aircraft maintenance support experience. Shall have minimum 3 years T/M/S aircraft maintenance experience for the T/M/S aircraft hired to maintain. Aviation Ordnance candidates experience shall be minimum five years O-Level experience. Shall have T/M/S aircraft maintenance experience for the T/M/S aircraft hired to maintain, with the last two years. Experience as T/M/S CDI or CDQAR is required Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift up to 50 pounds. Compensation & Benefits HIRING HOURLY RANGE: $51.46 (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant internal equity, and alignment with market data.)

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic III (Quality Assurance) Task Description: Aircraft Mechanic III (23023): Leads a team in the performance of aircraft maintenance, inspections, and scheduled / unscheduled maintenance. Processes the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. Capable of performing, supervising and inspecting the duties of Mechanic Is, IIs and IIIs. A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Responsibility: To perform Intermediate level maintenance and modifications on SE, IMRL and aircraft components in the physical custody of Fleet Readiness Center West Detachment China Lake, in support of VX-9 and VX-31 and outlying areas covered under the IMRL program. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Intermediate Level maintenance and possess one or more of the specialties of the assigned aircraft below: Airframe/Structural, Landing Gear, Launch/Arresting, Wing Fold, Hydraulic/Pneumatic, Mechanical Flight Control Systems, Power Plants and related Sub-Systems, Fuel and Air Systems, and Avionics/Electrical Systems and related Sub-systems Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. Aircraft Mechanic III shall have experience writing with clarity and technical accuracy and exhibit effective leadership qualities and ensure adherence to all applicable policies and procedures. Possess a high degree of expertise in the control and coordination of aircraft maintenance. Thorough working knowledge of applicable maintenance/technical manuals and publications. Thorough working knowledge of aircraft maintenance records. Working understanding of the aircraft and aircraft systems TASK REQUIREMENTS: Familiar with duties assigned to personnel within all work centers. Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. Scheduled and unscheduled maintenance. Maintenance Control planning and management. Aircraft maintenance action documentation via logs, records, forms, and electronic means Support Equipment (SE operation and inspections. Corrosion Control/Aircraft Painting. Troubleshooting Preservation/de-preservation. General Aircraft Maintenance. Ordnance handling, limited to unjamming related equipment/ALSS maintenance. Technical Directive compliance and modifications. Individual Material Readiness List (IMRL), and Metrology and Calibration (METCAL) Program Management. Maintain Aircraft, Engines, and SE Logbooks. Aviation Life Support System (ALSS) Maintenance. Central Technical Publications Library Programs Management Dispersed Technical Publications Librarian Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment. Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Perform other tasks as directed. PREFERRED QUALIFICATIONS: Ten or more years' experience with NALCOMIS/OOMA Fifteen years extensive knowledge of Naval Aviation Maintenance Program (NAMP). Familiarity and ability to use military tech manuals. Advanced Corrosion Control Course Attended Quality Assurance Admin course or Equivalent. BASIC QUALIFICATIONS: Individual (I) Aircraft Maintenance Qualification New hire personnel should have ten years' aviation maintenance experience on applicable T/M/S aircraft Navy “QAR” school or USMC/USCG equivalent Must have been CDI/CDQAR on T/M/S aircraft or equipment Three years' experience as QAR with two years on appropriate T/M/S aircraft within past five years Six years extensive knowledge of Naval Aviation Maintenance Program (NAMP). Must have valid driver's license Must be eligible to qualify for and maintain SECRET level security clearance Must be able to work 1 st , 2 nd , 3 rd and weekend shift schedule as required. Must be able work flexible work-week schedules i.e. Mon-Fri, Sun-Thur, Fri-Mon or as required. Must be able to pass a background check. Must satisfactorily complete the equivalent of a trustworthy National Agency Check plus Written Inquiries with Credit Check (NACI), IAW DTM-08-003 “Next Generation Common Access Card (CAC) Implementation Guidance”. Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must be able to deploy to support off station exercises and perform other support duties as assigned. Compensation $53.46/hour Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 6.16 hours of PTO per pay period. KAI employees at China Lake FRCW have a minimum of 12 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Global Services (BGS) is seeking an **F-18 Structures Mechanic** located at Lemoore, CA. **POSITION RESPONSIBILITIES:** + Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. + Oversees assembly, disassembly or overhaul. + Configures aerospace vehicles and bench test equipment. + Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. + Performs validation/verification testing of systems and components. + Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). + Inspects components and verifies repairs for flight worthiness requirements. + Works under general direction. **Basic Qualifications:** + Minimum of 3 years experience as an Aircraft Mechanic + Minimum of 3 years experience with aerospace structures **PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE):** + Experience with F/A-18 and/or EA-18G platform + FAA Airframe and Powerplant License preferred. + Experience with composite repair and paint Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies _._ At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. **Summary pay range: 70,550 - 95,450** Applications for this position will be accepted until **Dec. 15, 2025** **Export Control Requirements:** This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. **Export Control Details:** US based job, US Person required **Relocation** Relocation assistance is not a negotiable benefit for this position. **Security Clearance** This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim U.S. Secret Clearance Pre-Start and final U.S. Secret Clearance Post-Start is required. **Visa Sponsorship** Employer will not sponsor applicants for employment visa status. **Shift** This position is for 1st shift **Equal Opportunity Employer:** Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Performs work as part of a team in an industrial laundry facility. Responsible for the safe, expeditious, and accurate performance of routine in reference to a daily preventative maintenance schedule in and around the laundry facility. * Responsibilities/Essential Functions: Essential duties and responsibilities of the position include but are not limited to: Maintains all plant equipment to include high volume industrial washers and or dryers. Repairs, replaces equipment when necessary; Performs basic plumbing, mechanical, and electrical work. Ability to trouble-shoot and solve technical issues by following technical manuals and schematics; Orders necessary parts, tools, and equipment in a timely manner by following company procurement policy; Maintains a proper Daily Schedule Control for equipment maintenance and preventative maintenance schedule and record; Conducts daily removal and processing of waste solids generated from treatment process; Performs equipment troubleshooting, makes necessary repairs, and completes preventative maintenance and housekeeping practices for all related wastewater hardware; Maintains safe and clean work environment, and observes best practices in all production activities; Uses safety precautions, follows electrical lock-out tag-out procedures for equipment, and adheres to all safe work practices and policies for all safety, boiler, and wastewater treatment procedures; Other duties as required or assigned * Knowledge/Skills/Abilities: Demonstrated mechanical and basic electrical aptitude; Familiar with standard maintenance procedures, preventative maintenance schedules, and proper safety techniques; Basic knowledge of industrial laundry equipment and required codes; Ability to comprehend and perform all required training, written, and verbal instructions; Good verbal and/or written communication skills; Ability to work independently and as part of a team; Ability to meet attendance schedule; Work is based on a shift schedule, and may include weekends. Overtime required as needed. * Working Environment/Safety Requirements: Work is performed in a high volume production warehouse setting and regularly exposed to outside weather conditions, extreme heat and cold conditions as well as dust and noise. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions; Requires the ability to routinely move, lift, carry, push, or pull items weighing up to 25 lbs, and occasionally up to 50 lbs; Requires bending, reaching, pulling, pushing, twisting, and lifting; Requires the use of hands for grasping and other manipulations; Requires standing and walking for long periods of time; Must be able to work from elevated heights using ladders, mezzanines, and aerial lifts. Compensation: The hourly rate that Vestis reasonably expects to pay for this position is $36.50 depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Experience On Detail Description * Experience: * Industrial laundry experience a plus but not required. * 1-3 years of Mechanical experience required. * 1-3 years Electrical experience preferred. * 2-4 years of related experience in mechanical troubleshooting, maintenance and/or installation * Knowledge of OSHA, EPA, HAZ mat procedures and regulations helpful * Excellent mechanical dexterity and ability * Education: High school diploma or equivalent required; * License Requirements/ Certifications: Location: MC503 Fresno CA. #CB

Performs work as part of a team in an industrial laundry facility. Responsible for the safe, expeditious, and accurate performance of routine in reference to a daily preventative maintenance schedule in and around the laundry facility. - Responsibilities/Essential Functions: Essential duties and responsibilities of the position include but are not limited to: Maintains all plant equipment to include high volume industrial washers and or dryers. Repairs, replaces equipment when necessary; Performs basic plumbing, mechanical, and electrical work. Ability to trouble-shoot and solve technical issues by following technical manuals and schematics; Orders necessary parts, tools, and equipment in a timely manner by following company procurement policy; Maintains a proper Daily Schedule Control for equipment maintenance and preventative maintenance schedule and record; Conducts daily removal and processing of waste solids generated from treatment process; Performs equipment troubleshooting, makes necessary repairs, and completes preventative maintenance and housekeeping practices for all related wastewater hardware; Maintains safe and clean work environment, and observes best practices in all production activities; Uses safety precautions, follows electrical lock-out tag-out procedures for equipment, and adheres to all safe work practices and policies for all safety, boiler, and wastewater treatment procedures; Other duties as required or assigned - Knowledge/Skills/Abilities: Demonstrated mechanical and basic electrical aptitude; Familiar with standard maintenance procedures, preventative maintenance schedules, and proper safety techniques; Basic knowledge of industrial laundry equipment and required codes; Ability to comprehend and perform all required training, written, and verbal instructions; Good verbal and/or written communication skills; Ability to work independently and as part of a team; Ability to meet attendance schedule; Work is based on a shift schedule, and may include weekends. Overtime required as needed. - Working Environment/Safety Requirements: Work is performed in a high volume production warehouse setting and regularly exposed to outside weather conditions, extreme heat and cold conditions as well as dust and noise. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions; Requires the ability to routinely move, lift, carry, push, or pull items weighing up to 25 lbs, and occasionally up to 50 lbs; Requires bending, reaching, pulling, pushing, twisting, and lifting; Requires the use of hands for grasping and other manipulations; Requires standing and walking for long periods of time; Must be able to work from elevated heights using ladders, mezzanines, and aerial lifts. Compensation: The hourly rate that Vestis reasonably expects to pay for this position is $36.50 depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Experience On Detail Description + Experience: + Industrial laundry experience a plus but not required. + 1-3 years of Mechanical experience required. + 1-3 years Electrical experience preferred. + 2-4 years of related experience in mechanical troubleshooting, maintenance and/or installation + Knowledge of OSHA, EPA, HAZ mat procedures and regulations helpful + Excellent mechanical dexterity and ability - Education: High school diploma or equivalent required; - License Requirements/ Certifications: Location: MC503 Fresno CA. \#CB Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits?! Would you like to work with a company that invests in your growth? Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are: As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary. What's in it for YOU: Competitive Pay Rates! 40 hours a week, not flat rate OT as needed over 40 hours Full Benefits: Medical, Vision, Dental, and 401K plan Paid vacation Company provided uniform Corporate partner discount program Career advancement through a national company Duties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components. Perform scheduled preventative maintenance of vehicles Execute major and minor repairs of defective components. Document all activities in MV's Fleet Management System. Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements: High school diploma or equivalent. Combination of at least two (2) to three (3) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program. Must be able to pass a pre-employment drug screen and random drug testing. Starting pay rate: $36.11/hour MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

The Kitchen Mechanic repairs, maintains, and installs a variety of commercial food preparation and serving equipment. This includes, but is not limited to: commercial ovens, ranges, fryers, warmers, proofers, mixers, dishwashers, coolers, freezers, ice machines, and soft-serve ice cream equipment. The Kitchen Mechanic also orders supplies and spar parts as necessary to properly maintain the equipment under his care. Salary Details: $32.22 / hr - $41.48 / hr based on overall experience Responsibilities: Troubleshoots, repairs and maintains a wide variety of commercial restaurant and food preparation equipment such as mixers, slicers, blenders, etc. Repairs and maintains commercial ice makers and ice dispensers. Repairs and maintains commercial dishwashing and ware washing equipment. Repairs and maintains gas and electric grills, ovens, stoves, and ranges. Repairs and maintains commercial soft-serve ice cream machines. Repairs and maintains commercial gas and electric fryers. Repairs and maintains commercial freezers, coolers, cold tables, and refrigerated display cases. Orders and maintains a stock of repair parts as required to facilitate timely repair of kitchen equipment. Maintains all assigned equipment in a safe and functional condition. Completes a variety of maintenance related paperwork, including daily logs, work orders, requisitions, and quotes. Provides technical specifications for the purchase of new and replacement commercial kitchen equipment. Communicates the status of all kitchen equipment and components in both verbal and written formats to Maintenance and Foods management. Reads and interprets equipment schematics for commercial kitchen and serving equipment. Other duties may be assigned. Qualifications: High School Diploma or GED required. At least 5 years' experience in the repair and maintenance of commercial kitchen equipment. At least 3 years' experience with the repair and maintenance of refrigeration equipment such as freezers, coolers, and ice making equipment. At least 2 years' experience with the repair and maintenance of gas or electric cooking equipment such as ranges, ovens, grills, or fryers. Basic electrical troubleshooting skills (including AC and DC motors and controls). Ability to work nights, weekends and holiday periods to meet business needs. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio and percent and to draw and interpret bar graphs. Ability to read, write, speak and understand English at a level sufficient to follow written policies and procedures; complete a variety of basic forms; and interact with guests including understanding and responding to specific questions.

The Aircraft Mechanic I - UH-60 performs maintenance on helicopters, excluding repair of systems according to drawings, blueprints, directives, technical manuals and safety procedures. Removes and installs aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, mechanical flight controls and their components. Services and lubricates aircraft and subsystems. Prepare aircraft for inspections and maintenance checks. Performs scheduled inspections and assists in performing special inspections. Performs limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required. Uses and performs operator maintenance on tools, special tools and aircraft ground support equipment. Prepare forms and records related to aircraft maintenance. Removes and disassembles defective parts of the aircraft. Maintains the supplies and perform preventive maintenance. Performs additional duties including maintenance duties, as requested. Adheres to company policies and safety programs (Safety-first mentality) Minimum Requirements High School Diploma or equivalent is required. U.S. military technical school or specialized training course is desired, certification of education level is required. Valid up-to-date A&P license (optional ) Shall have three years aviation maintenance experience, two years rotary wing aircraft experience, and two years on the assigned Mission Design Series (MDS). All experience must be within the six most recent years. Valid Driver's License. Must provide own tools/toolbox. Recruiters will provide toolbox requirements to candidates upon selection. Must be able to work, day shift, swing shift, night shift, and/or weekend shift (if applicable) - As required for CBA. Must be eligible to obtain a Passport and be able to travel internationally (applicable to OCONUS work sites). Must be willing and able to work any shift, as assigned by Union. Clearance Requirements (as applicable) Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility. Must be able to obtain and maintain a (Secret Clearance) US Government Clearance. US Citizenship is required to obtain s Secret Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization at this work location. Knowledge & Skills Thorough knowledge of aircraft systems on the assigned MDS. Basic knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, hydraulic press machine, and those listed in the assigned MDS Maintenance Allocation Chart (MAC). Working knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects Possess the level of experience to inspect all required aeronautical type maintenance to be performed by aircraft mechanic. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift/push/pull heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test qualification. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. May be expected to work in austere environments and all-weather conditions. California: Compensation & Benefits: HIRING HOURLY RANGE: $46.35-49.65 (Hourly rate set by CBA) This position includes a competitive benefits package. Bi-weekly accrual of 3.39 hours (0 to less than 48 months) Bi-weekly accrual of 4.93 hours (48 months but less than 108 months) Bi-weekly accrual of 6.47 hours (108 months or more) 11 paid Holidays (outlined in CBA) Sick Leave - Newly hired or transferred employees into the bargaining until shall receive up front/front-loaded prorate sick leave hours based on the remaining weeks in the calendar year including the week of hire at the rate of 1.33 hour per week up to 56 hours 401K Short Term / Long Term Disability Flex Spending Programs- FSA/HSA Employee Stock Option Purchasing Program Medical /Dental/Eye Insurance Life Insurance and AD&D Well-being programs Employee assistance programs Tuition assistance Voluntary Benefits-identity protection, Pet insurance, legal services, commuter benefits (where applicable), student loan programs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran's status, ancestry, sexual orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at EEO including Disability/Protected Veterans and Labor Laws Posters. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic II (Painter) Task Description: Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Responsibility: To perform Intermediate level maintenance and modifications on SE, IMRL and aircraft components in the physical custody of Fleet Readiness Center West Detachment China Lake, in support of VX-9 and VX-31 and outlying areas covered under the IMRL program. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Intermediate Level maintenance and possess one or more of the specialties of the assigned aircraft below: Paint and Final Finish Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. Aircraft Mechanic II shall have experience writing with clarity and technical accuracy and exhibit effective leadership qualities and ensure adherence to all applicable policies and procedures. Possess a high degree of expertise in the control and coordination of aircraft maintenance. Thorough working knowledge of applicable maintenance/technical manuals and publications. Thorough working knowledge of aircraft maintenance records. Working understanding of the aircraft and aircraft systems TASK REQUIREMENTS: Familiar with duties assigned to personnel within all work centers. Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. Scheduled and unscheduled maintenance. Maintenance Control planning and management. Aircraft maintenance action documentation via logs, records, forms, and electronic means Support Equipment (SE operation and inspections. Corrosion Control/Aircraft Painting. Troubleshooting Preservation/de-preservation. General Aircraft Maintenance. Ordnance handling, limited to unjamming related equipment/ALSS maintenance. Technical Directive compliance and modifications. Individual Material Readiness List (IMRL), and Metrology and Calibration (METCAL) Program Management. Maintain Aircraft, Engines, and SE Logbooks. Aviation Life Support System (ALSS) Maintenance. Central Technical Publications Library Programs Management Dispersed Technical Publications Librarian Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment. Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Perform other tasks as directed. PREFERRED QUALIFICATIONS: Ten or more years' experience with NALCOMIS/OOMA Ten years extensive knowledge of Naval Aviation Maintenance Program (NAMP). Familiarity and ability to use military tech manuals. Advanced Corrosion Control Course Attended Quality Assurance Admin course or Equivalent. BASIC QUALIFICATIONS: Individual (I) Aircraft Maintenance Qualification Paint and final finish school or equivalent New hire personnel should have five years' aviation maintenance experience on applicable T/M/S aircraft Preferred to have 2 years T/M required/Series preferred Intermediate experience within last 3 years Five years extensive knowledge of Naval Aviation Maintenance Program (NAMP). Must have valid driver's license Must be able to work 1 st , 2 nd , 3 rd and weekend shift schedule as required. Must be able work flexible work-week schedules i.e. Mon-Fri, Sun-Thur, Fri-Mon or as required. Must be able to pass a background check. Must satisfactorily complete the equivalent of a trustworthy National Agency Check plus Written Inquiries with Credit Check (NACI), IAW DTM-08-003 “Next Generation Common Access Card (CAC) Implementation Guidance”. Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must be able to deploy to support off station exercises and perform other support duties as assigned. Compensation $50.91/hour Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 6.16 hours of PTO per pay period. KAI employees at China Lake FRCW have a minimum of 12 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

*This position is a short term employment opportunity, not to exceed 90 days unless approved by program management* Aircraft Mechanic - Perform routine scheduled and unscheduled maintenance to include inspection, operational test, repair, modification and troubleshooting on ER-2 (U-2/TR-2) aircraft, components and equipment. Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance, and instruction to other employees as needed. Candidate to possess a high degree of expertise on aircraft systems. Demonstrates in-depth knowledge of applicable maintenance/technical manuals, publications, instructions, and special tools and test equipment. Must be familiar with operational capabilities and limitations of aircraft systems and be able to maintain all aircraft main, auxiliary, secondary power systems, fuel systems, engine and bleed air components. Perform troubleshooting, testing, replacing or repairing worn or damaged components using hand tools, gauges, and testing equipment; removing the engine from aircraft, disassembling and inspecting parts for wear, cracks, security, or other defects and repairing or replacing defective engine parts and reassembles. Required to read and understand maintenance manuals, CMP, SRM, interpret blueprints, technical directives, planning documents, test specifications, technical publications and procedures, and applicable safety manuals. Must be Customer service-oriented. Physical Demands: This maintenance classification activity is usually accomplished in a flight line-like environment with extensive climbing, standing, stooping, bending, pushing, kneeling, stretching and walking demands. May require lifting of objects whose weight normally will not exceed 50lbs. Special vision abilities required to perform this job are close and peripheral vision and acceptable depth perception. Work Environment: The diversity of working conditions range from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject the individual to severe changes in temperature, wind, rain, etc. May be required to work in areas where high noise hazards, exposure to fumes, airborne particles, and electrical shock hazards exist. Licensing, Certification Requirements: Airframe and Powerplants (A&P) License - Required or able to obtain within one (1) year 5 years fixed-wing, jet engine aircraft maintenance required H/S AND 5 years' experience in ER-2/U-2 aircraft maintenance - preferred U.S. Citizenship - required Valid State Driver's License - required Valid U.S. Passport - ability to obtain and maintain High School Degree or GED - required Ability to travel - required Must obtain basic hand tools and toolbox within three (3) months of hire. Clearance Required: Able to obtain and maintain U.S. Secret As a government contractor, Vertex Aerospace requires all employees to be fully vaccinated as a condition of employment in accordance with Executive Order 14042. Exceptions to this policy are granted on a case-by-case basis for those that request a religious or medical accommodation. A vaccination status form and proof of vaccination, if applicable, is required. Benefits include the following: Healthcare coverage Retirement plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. Hourly Mech $42.34 USD Hourly Tech $43.07 USD #VETS #MAINT

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Global Services (BGS) is seeking an F-18 Structures Mechanic located at Lemoore, CA. POSITION RESPONSIBILITIES: * Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. * Oversees assembly, disassembly or overhaul. * Configures aerospace vehicles and bench test equipment. * Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. * Performs validation/verification testing of systems and components. * Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). * Inspects components and verifies repairs for flight worthiness requirements. * Works under general direction. Basic Qualifications: * Minimum of 3 years experience as an Aircraft Mechanic * Minimum of 3 years experience with aerospace structures PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE): * Experience with F/A-18 and/or EA-18G platform * FAA Airframe and Powerplant License preferred. * Experience with composite repair and paint Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: 70,550 - 95,450 Applications for this position will be accepted until Dec. 15, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim U.S. Secret Clearance Pre-Start and final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. Read more Shows the full job description for sighted users Apply Now Save JobRemove Job

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits?! Would you like to work with a company that invests in your growth? Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are: As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary. What's in it for YOU: Competitive Pay Rates! 40 hours a week, not flat rate OT as needed over 40 hours Full Benefits: Medical, Vision, Dental, and 401K plan Paid vacation Company provided uniform Corporate partner discount program Career advancement through a national company Duties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components. Perform scheduled preventative maintenance of vehicles Execute major and minor repairs of defective components. Document all activities in MV's Fleet Management System. Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements: High school diploma or equivalent. Combination of at least two (2) to three (3) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program. Must be able to pass a pre-employment drug screen and random drug testing. MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

The Aircraft Mechanic II (UH-60 QC Inspector) inspects the repair and modification of aircraft structures, structural components, and engines of complex to extreme difficulty. Plans, conducts, and supervises aircraft technical inspections. Inspects and evaluates repairs and modifications to aircraft structures, structural components and engines. Inspects and evaluates maintenance of aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions. Applies technical expertise in restoring equipment condition and operation. Participates in maintenance test flights and operation checks as required. Ensures compliance with aircraft configuration control, oil analysis Program and test measuring diagnostic equipment calibration. Provides lower-level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies. Contributes input to development and implementation of quality control and ground safety programs to ensure compliance with contract specifications. Inspects and verifies proper completion and documentation of safety and flight discrepancies. Must be able to lead small groups independently and provide oversight updates to the program leadership. Perform other qualified duties as required. Minimum Requirements: Must have five years of recent applicable aircraft maintenance experience. Must have at least one year experience inspecting MDS aircraft assigned. Must possess a Federal Aviation Administration (FAA) Airframe and Powerplant License (A&P). If no A&P, shall have a minimum of five years' experience as an aircraft inspector on the Mission Design Series (MDS) airframe they will be inspecting. Must hold a valid (current) FAA Inspection Authorization (IA). If no IA, shall have a minimum of five years' experience as an aircraft inspector on the Mission Design Series (MDS) airframe they will be inspecting. Must have satisfactorily completed the 15-series career management field Advanced Leadership Course (formerly BNCOC), AMOC, or possess a Federal aviation Administration (FAA) Airframe and Powerplant License (A&P). Must have Security Clearance appropriate to the level required for the work. Broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and technical publications. Working knowledge of aircraft safety requirements and how to operate portable firefighting equipment. Ability to read, interpret, and comprehend schematic diagrams, drawings, charts, and technical publications. Exceptional communication skills, leadership abilities, and personnel management skills are required. Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. Able to prioritize workload to maintain schedules on assigned projects. Basic computer data entry skills required for use of maintenance and logistics databases. Ability to communicate effectively, both verbally and in writing. If assigned to flight duty, shall possess a current, valid ARMY or FAA Third Class Medical Certificate and meet the qualifications in AR 95-20. Must meet qualifications for performing UH-60 Weight & Balance entries High School Diploma or Equivalent required. Must be willing and able to work any shift, as assigned by Union. Clearance Requirements: Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility. Preferred/Physical Qualifications: Frequently lifts parts and equipment up to 25 pounds. Occasionally lifts objects up to 50 pounds. Most heavy lifting is accomplished through the use of mechanical devices. Work is performed in Aircraft maintenance hangar that is moderately lighted, heated, and ventilated. Work could be performed outside as well. May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions. The employee is occasionally required to sit, climb, or balance May be exposed to extreme noise from turbine and jet engine aircraft. May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft. Knowledge of military and/or company forms required by work specifications is a plus May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft. Will handle dirty parts and lubricants. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. California: Compensation & Benefits: HIRING SALARY RANGE: $104,145.60- $50.07 an Hour (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant internal equity, and alignment with market data.) This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: please visit our careers site: ********************** Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic I (Airframes) Task Description: Aircraft Mechanic I (23021): Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti- icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair. May be required to be licensed by Federal Aviation Administration. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Federal Aviation Administration (FAA) licensing of contractor employee technical proficiency is not required. Responsibility: To perform Intermediate level maintenance and modifications on SE, IMRL and aircraft components in the physical custody of Fleet Readiness Center West Detachment China Lake, in support of VX-9 and VX-31 and outlying areas covered under the IMRL program. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Intermediate Level maintenance and possess one or more of the specialties of the assigned aircraft below: Airframe/Structural and related sub-systems Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. Aircraft Mechanic I shall have experience writing with clarity and technical accuracy and exhibit effective leadership qualities and ensure adherence to all applicable policies and procedures. Possess a high degree of expertise in the control and coordination of aircraft maintenance. Thorough working knowledge of applicable maintenance/technical manuals and publications. Thorough working knowledge of aircraft maintenance records. Working understanding of the aircraft and aircraft systems TASK REQUIREMENTS: Familiar with duties assigned to personnel within all work centers. Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. Scheduled and unscheduled maintenance. Maintenance Control planning and management. Aircraft maintenance action documentation via logs, records, forms, and electronic means Support Equipment (SE operation and inspections. Corrosion Control/Aircraft Painting. Troubleshooting Preservation/de-preservation. General Aircraft Maintenance. Ordnance handling, limited to unjamming related equipment/ALSS maintenance. Technical Directive compliance and modifications. Individual Material Readiness List (IMRL), and Metrology and Calibration (METCAL) Program Management. Maintain Aircraft, Engines, and SE Logbooks. Aviation Life Support System (ALSS) Maintenance. Central Technical Publications Library Programs Management Dispersed Technical Publications Librarian Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment. Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Perform other tasks as directed. PREFERRED QUALIFICATIONS: Ten or more years' experience with NALCOMIS/OOMA Ten years extensive knowledge of Naval Aviation Maintenance Program (NAMP). Familiarity and ability to use military tech manuals. Advanced Corrosion Control Course Attended Quality Assurance Admin course or Equivalent. BASIC QUALIFICATIONS: Individual (I) Aircraft Maintenance Qualification Airframes “C” school or USMC/USCG equivalent New hire personnel should have five years' aviation maintenance experience on applicable T/M/S aircraft Preferred to have 1 year T/M required/Series preferred Intermediate experience within last 3 years Three years extensive knowledge of Naval Aviation Maintenance Program (NAMP). Must have valid driver's license Must be able to work 1 st , 2 nd , 3 rd and weekend shift schedule as required. Must be able work flexible work-week schedules i.e. Mon-Fri, Sun-Thur, Fri-Mon or as required. Must be able to pass a background check. Must satisfactorily complete the equivalent of a trustworthy National Agency Check plus Written Inquiries with Credit Check (NACI), IAW DTM-08-003 “Next Generation Common Access Card (CAC) Implementation Guidance”. Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must be able to deploy to support off station exercises and perform other support duties as assigned. Compensation $48.49/hour Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 6.16 hours of PTO per pay period. KAI employees at China Lake FRCW have a minimum of 12 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets