Aircraft mechanic jobs in Menifee, CA

**ESSENTIAL FUNCTIONS** THE ESSENTIAL FUNCTIONS INCLUDE, BUT ARE NOT LIMITED TO, THE FOLLOWING DUTIES. ADDITIONAL ESSENTIAL FUNCTIONS MAY BE IDENTIFIED BY THE ORGANIZATION AND LISTED AS SUCH IN THE INCUMBENT'S PERFORMANCE APPRAISAL ELEMENTS. VARIOUS TASKS MAY BE ASSIGNED UNDER EACH ESSENTIAL FUNCTION. THOSE THAT ARE LISTED UNDER THE EXAMPLES OF WORK ARE NOT ALL-INCLUSIVE; THEY ARE EXAMPLES ONLY AND MAY BE AMENDED OR ADDED TO AS NEEDED BY THE ORGANIZATION. 1. Maintenance of Aircraft **EXAMPLES OF WORK** EXAMPLES OF WORK PERFORMED IN THIS CLASSIFICATION INCLUDE, BUT ARE NOT LIMITED TO, THE FOLLOWING TASKS. THESE TASKS MAY BE AMENDED OR OTHER TASKS MAY BE ASSIGNED AS NECESSARY. + Inspects and certifies aircraft at specific intervals as required by OEM and FAA. + Troubleshoots system malfunctions, performs necessary corrective actions. + Documents maintenance of aircraft on appropriate forms. + Removes and replaces defective components. + Complies with Service Bulletins, Instructions, and Airworthiness Directives as directed. + Performs maintenance on Ground Support equipment. + Performs preflight/post-flight turnaround inspections and servicing when required. + Maintains aircraft logbooks and historical data as required. + Complies with safety, foreign object damage, and tool control program requirements. + Washes, waxes, clean and maintains exterior and interior of aircraft. + Serves as a point of contact with the Quality Assurance Representative. + Advises management of problems that may delay scheduled delivery of aircraft to the customer. + Ensures materials issued for assigned tasks are the correct items to repair the problem. + Provides on-the-job training to new employees as required. + Assists with supervision and inspects maintenance performed by FAA-certified and non-certified personnel. + Services oxygen, nitrogen, tires, oil, and hydraulic systems. + Performs Corrosion Control checks when required. + Greets visitors and clients. + Exhibits positive courteous behavior with customers businesses and coworkers. + Assists coworkers and those in other departments to successfully perform job tasks and functions when necessary. + Follows all safety procedures and practices as established by the Company and regulatory bodies. + This job does not have supervisory responsibilities. **INCUMBENT PERFORMS OTHER JOB-RELATED TASKS AS ASSIGNED AND REQUIRED; ANY DUTIES/TASKS INCLUDED IN THE EMPLOYEE'S PERFORMANCE EVALUATION ELEMENTS ARE ESSENTIAL TO THAT EMPLOYEE'S POSITION WITHIN THE JOB CLASSIFICATION.** **MINIMUM QUALIFICATIONS** The following minimum qualifications have been identified by subject matter experts (SME'S) who have supervised this position or functioned in the position; they are based on job analysis information supplied by these SME'S. However, if a candidate believes he/she is qualified for the job although he/she does not have the minimum qualifications set forth below, he/she may request special consideration through substitution of related education and experience, demonstrating the ability to perform the essential functions of the position. Any request to substitute related education or experience for minimum qualifications must be addressed to the Director of Human Resources in writing, identifying the related education and experience which demonstrates the candidate's ability to perform all essential functions of the position. If a candidate believes he/she needs a reasonable accommodation to meet these minimum qualifications or, if called for an interview, to attend such an interview, the candidate must notify the Director of Human Resources in writing of the need for the accommodation and identify the specific accommodation requested. As a government contractor, Vertex Aerospace requires all employees to be fully vaccinated as a condition of employment in accordance with Executive Order 14042. Exceptions to this policy are granted on a case-by-case basis for those that request a religious or medical accommodation. A vaccination status form and proof of vaccination, if applicable, are required. **EDUCATION and/or EXPERIENCE:** Graduation from a standard four (4) year high school or equivalent (GED) AND two (2) years of experience in work directly related to aircraft maintenance. **CERTIFICATES, LICENSES, REGISTRATIONS, and EQUIPMENT:** A & P License Sufficient aviation maintenance hand tools to perform routine Airframe and Powerplant duties **KNOWLEDGE, SKILLS, ABILITIES, AND OTHER CHARACTERISTICS:** The following skills and abilities are required: + to understand and use the English language both oral and written to communicate information or ideas to another person or persons; + to write simple correspondence; + to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals; + to add, subtract, multiply and divide into all units of measure, using whole numbers, common fractions, and decimals; + to interpret a variety of instructions furnished in written, oral, diagram or schedule form; + to recognize or identify the existence of a problem as well as elements of a problem; + to perform a task in the presence of distracting stimulation or under monotonous conditions without significant loss of thought process and efficiency; + to perceive and feel such attributes of objects and materials as size, shape, temperature, or texture; + to operate hand and power tools; + to travel worldwide with limited notice; obtain a security clearance; obtain a passport and/or visa; + to interpret drawings, specifications, and schematics of aircraft instrument/electronic components; + to recognize from schematics and drawing not only how one assembly functions but also how various assemblies interact with each other; Knowledge of the following is required: + databases sufficient to perform the job, duties, and tasks associated with the position; + aircraft sheet metal repair and component repair; + instrument, electronic and electrical test equipment; + military or commercial aviation maintenance and its terminology; + U.S. government regulations for federal contractors and FAA maintenance programs **PHYSICAL DEMANDS:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand, walk, and taste or smell. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. **WORK ENVIRONMENT:** The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, and the risk of electrical shock. The employee is occasionally exposed to high, precarious places; toxic or caustic chemicals; outside weather conditions; risk of radiation; and vibration. The noise level in the work environment is usually moderate. Vertex is committed to building a diverse and inclusive environment in which we recognize and value each other's differences as well as fostering a culture that promotes its core values: Professionalism, Integrity, and Respect. As an equal opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, or status as a protected veteran. **Salary Hourly $50.78 USD** \#MAINT \#VET Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

The CBP Aircraft Mechanic performs maintenance, overhaul, repair, inspection, and aircraft servicing functions on assigned aircraft within an aircraft maintenance and operations environment and in accordance with applicable instructions. Principal Accountabilities: Perform maintenance, preventive maintenance, inspection, repair, and modification of aircraft in accordance with 14 CFR and Department of Defense (DoD) regulations, technical manuals, and other data as applicable. Perform daily and turnaround inspections on all assigned aircraft. Perform inspections, corrosion control, troubleshooting and fault isolation on aircraft systems. May be required to fly on Government aircraft for relocation, to conduct in-flight checks (test flights) and to conduct trouble shooting that cannot be completed on the ground. May be required to perform official travel to temporary duty sites within and outside the United States. Furnish own hand tools to perform maintenance of aircraft (necessary special tools and test equipment will be furnished by the customer). May be required to perform other duties as required to support the overall mission. Minimum Requirements: Must possess and maintain a valid State driver's license. Must be willing to subject themselves to random drug tests. Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship required to obtain clearance. High school graduate or have an equivalency certificate from an accredited program, is required. Must possess a valid FAA Mechanic License with Airframe and Powerplant (A&P) ratings. Must be competent and knowledgeable in the repair and maintenance of both fixed-wing and rotary-wing aircraft and aircraft systems to include airframes, structural, hydraulics, fuel and electrical systems, and aircraft engines. Must be competent and knowledgeable in system troubleshooting, reading and interpretation of schematics, blueprints, technical manuals and FAA, Company, and other Directives. Must be reliable and demonstrate good judgment. Able to follow base, federal and Company procedures for handling and disposal of hazardous waste materials. Ability to meet required deadlines and maintain necessary workflow. Ability to read, write, understand, and communicate in the English language and follow both verbal and written instruction. The ability to comprehend/interpret technical data. Physical Requirements/Working Environment: Be physically able to perform aircraft mechanic duties. Ability to move freely about the interior and meet aircraft specific specs for weight limit. Stand, squat, sit, walk, work with arms overhead for extended periods of time. May be required to wear a respirator. Pull, push, and lift up to 50 lbs. On occasions, individuals may also be required to work in areas where high noise hazards prevail, thus requiring the use of adequate ear protection. Preferred Qualifications: Prefer at least two years of experience working rotary-wing aircraft. AS350 or B300 experience highly desired. Compensation The hourly rate for this position is $53.60. Benefits: Amentum offers the following benefits for this position, subject to applicable eligibility requirements: medical, dental and vision insurance, 401K retirement plan, life insurance, long term and short-term disability insurance, paid time off and parental leave. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Job Title: Aircraft Mechanic III (Maintenance Control) Task Description: Aircraft Mechanic III (23023): Leads a team in the performance of aircraft maintenance, inspections, and scheduled / unscheduled maintenance. Processes the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. Capable of performing, supervising and inspecting the duties of Mechanic Is, IIs and IIIs. A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Additional Requirements: The Maintenance Controller performs administrative duties using computer, and other associated equipment within maintenance control. Assigns aircraft to the daily flight schedule. Releases aircraft "Safe for Flight", assigns project/priority codes and directs cannibalization actions to meet the unit's maintenance plan and daily flight schedule. Monitors maintenance schedules for accuracy and completion. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Airframe/Structural, Landing Gear, Launch/Arresting, Wing/Pylon Fold, Hydraulic/Pneumatic, mechanical Flight Control Systems, Power Plants and related Sub-Systems, Fuel and Air Systems, Hydraulic/Pneumatic Systems, Rotor Systems, Flight Control Systems, Transmission Drive Systems, Avionics/Electrical Systems and related Sub-Systems, and Aircraft Logs and Records Administration * Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. * Maintenance Controller shall have experience writing with clarity and technical accuracy, and exhibit leadership and ensure adherence to all applicable policies and procedures. * Possess a high degree of expertise in the control and coordination of aircraft maintenance. * Thorough working knowledge of applicable maintenance/technical manuals and publications. * Thorough working knowledge of aircraft maintenance records. * Working understanding of the aircraft and aircraft systems. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: * Performs Maintenance Control duties * Directly responsible and accountable to the Site Manager for Quality management of the Technical Directive compliance program and fill in as the Technical directive program coordinator as needed. * Familiar with duties assigned to all personnel within the Maintenance Control Work Center. Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. * Screens completed VIDS/MAFs for correct entries and data. Maintain Aircraft Discrepancy Book (ADB) in accordance with OPNAVINST 4790.2 Series. * When qualified and assigned by the Maintenance Control Supervisor, assists in scheduling aircraft into the maintenance program to ensure maximum availability of assets, become designated to release all TMS aircraft "Safe for Flight." * Coordinates the daily flight schedule and configuration requirements with duty and applicable work centers. * Coordinates and screen Daily/Turnaround and special inspections as well as component and hi-time requirements to ensure aircraft are current for the flight schedule. * Performs duties as Liaison with base personnel for other requirements to include but not limited to fueling / defueling operations, fire department and etc. * Perform preflight, thru flight, and post-flight maintenance inspections, launch and recover aircraft, and Preventive Maintenance Daily Inspections. * Performs aircraft maintenance functions of the Line, Corrosion Control, and Aircraft Organizational Level maintenance * Scheduled and unscheduled maintenance support for assigned H-1 aircraft * Performs aircraft Daily Turn Around Inspections * Performs aircraft launch and recovery operations * Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, corrosion control, preservation/de-preservation * Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in in the activities plan and daily flight schedule * Aircraft maintenance action documentation via logs, records, forms, and electronic means * Troubleshoot malfunctions in aircraft structure, landing gear, pneumatic, hydraulic, ventilation and heating, flight surfaces and controls, dynamic components, and powerplant systems. * Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO). * Inspect, repair, replace, and rebuild aircraft components/sub components to include rigging of flight control. * Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. * Confined space operations to include fuel cell entry * Support Equipment (SE) operation and inspections * Aircraft inspections * Aircraft movement * Support services * Corrosion Control * Preservation and de-preservation * General aircraft maintenance * Technical Directive complianceand modifications * Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment * Perform shift work and/or overtime as required * Perform phase, scheduled, unscheduled, periodic, and other hourly or calendar inspections. * Requisition repair parts, materials, and consumable supplies through military supply system. * Perform other tasks as directed. Preferred Qualifications: * Seven or more years' H-1 rotary wing experience * Ten or more years' rotary wing maintenance experience * Maintenance Control experience for (4) or more years with previous documented "Safe for Flight" experience. * Familiarity and ability to use NAVAIR IETMS. * Safe for Flight (SFF) qualification in H-1 aircraft and be able to obtain SFF certification upon hire * Seven or more years' experience with NALCOMIS/OOMA * Basic Corrosion Control Course * Advanced Corrosion Control Course/Paint and Final Finish * Automated Track and Balancing System (ATABS) Course (NATEC provides) * Previously certified H-1 CDQAR Basic Qualifications: * Individual (I) Aircraft Maintenance Qualification * Must have previous Technical Directive compliance program coordinator experience * Naval Aviation Maintenance Control Management for Optimized Organization Maintenance Activity course (C-555-0053) or if previously completed, both the Naval Aviation Maintenance Control Management course (Course D/E-555-0040) and the Naval Aviation Officer and Senior Supervisor NALCOMIS OOMA Familiarization course (Course D/E-555-0054). * Four years H-1 aviation maintenance experience * Must be able to work shift schedules as required per Performance Work Statement (PWS) * Must be able work work-week schedules i.e. M-F, Sn-Th or as required per PWS * Must be able to pass a background check * Must be able to obtain favorable National Agency Check with Written Inquires (NACI), IAW DTM-08-003 "Next Generation Common Access Card (CAC) Implementation Guidance or Secret security clearance as required for the position * Must be able to climb ladders, raised platforms, and aircraft * Must be able to use hand and power tools * Must have dexterity to handle small parts * Must be able to pass employment physicals * Must be able to deploy to support off station exercises and perform other support duties if required Compensation $45.99/hour Other Compensation Employees receive a health and welfare benefit of $6.25 per hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 5.52 hours of PTO per pay period. KAI employees at HMLAT 303 have 14 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Metrea is a defense company dedicated to translating commercial innovation into solutions for the hardest problems in national security. With deep mission expertise, Metrea focuses on delivering effects as-a-service across a spectrum of domains including Air & Space, Electromagnetic & Cyber, and Synthetic. Metrea Management provides central services to eleven (11) global capability units via Operations, Solutions, Strategy, Legal, and Finance teams. Capability Unit Metrea Strategic Mobility (MSM) operates a fleet of Boeing KC-135R aircraft, offering an air-to-air refueling service that seamlessly, safely, and professionally integrates into military aviation training and operations. Position Summary To perform this job successfully, an individual must be able to perform each essential duty listed below satisfactorily. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions. Work Location Metrea Strategic Mobility Flightline 17301 Heacock St Moreno Valley CA 92551 Role and Responsibilities * Inspect mechanical components of the Boeing KC-135 to identify discrepancies. * Maintain and repair all systems of the Boeing KC-135 to include: * Major / Minor aircraft inspections. * Hydraulics System - Replace hydraulic components, bleed systems, and diagnose discrepancies. * Jet Engine - Inspection, engine control rigging, and basic maintenance. * Electrics - Use wiring schematics, trace ground, and power faults, and rectify component failures. * Minor Fuel system repair, replace seals, in tank fuel probes and fuel system components is a plus, but not essential. * Minor Sheet Metal repair, including minor riveting is a plus, but not essential. * Aero Repair - Repair, replacement, and rigging of flight control surfaces is a plus, but not essential. * Multi Point Refueling System experience is a plus, but not essential. * CFM56 2-B / F108 jet engine experience is a plus, but not essential. * Avionics - Guidance & Control / Radio Communications experience is a plus, but not essential. * Perform daily aircraft inspections, launch/recover, refuel / defuel, debrief aircrew, troubleshoot, and repair discrepancies, jack aircraft, tow, and operate all required GSE (Ground Support Equipment). * Follow all safety directives, maintenance procedures, and FAA regulations Remain current on all required training and certifications * Accurately record aircraft maintenance in the automated maintenance records system. * Flight-line driving. * All duties assigned. Skills and Experience Education: * High School Diploma or equivalent Experience: * 5+ years working with heavy commercial aircraft or any military airframe. towing, jacking, and hazardous material use, storage, and disposal. * Must have A&P, IA, engine run qualified, and an ASTM NCATT Aircraft Electronic Technician Certificate. * Proven and demonstrable attention to detail skills. * Excellent problem-solving skills, determining causes of errors and deciding on the course of action to solve. * Comprehensive understanding of company philosophy and processes. * Must be able to take initiative and work independently. * Excellent communication skills, the ability to read and understand the information presented in writing, diagrams, and schematics. Computer Skills: * Basic skills in Microsoft Office Suite Programs Our Culture Metrea's single core value "rooted in humility" is supported by four key attributes; entrepreneurial, systematic, discerning & over-deliver which combined; form our Teammate Firmware, our culture. These attributes are explored during the hiring process, when we grow our teams and continually support the growth of our culture. We are a hyper-collaborative, dynamically hierarchical organization united by a passion for what we do, and how we do it, who we do it with, and who we do it for. Benefits Health and welfare. Retirement plan eligibility. Work Authorization / Security Clearance The employee must be a US citizen. The employee must be able to hold and maintain a Secret Clearance Level. AAP/EEO Statement Metrea Special Management LLC (MAM) is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law. Position Type and Expected Hours of Work This is a Part-time position with typical working hours of Monday through Friday, 7:00 a.m. to 4:00 p.m. Hours and work shifts may change in accordance with department and business needs. Non-exempt employees may be required to work over 40 hours per week with approval from the department manager. Part-time non-exempt employees must obtain approval from the department manager before working over 29 hours per week. Hours and work shifts may change by department and business needs. Significant travel is required to carry out assigned maintenance tasks and air operations successfully. Travel Travel requirements are: Up to 50% away from home. Work Environment This job operates in a clerical, office setting. This role routinely uses standard office equipment such as computers, phones, photocopiers, and filing cabinets. Physical Demands This position involves daily physical activity such as walking, lifting, reaching overhead Reasonable Accommodations Statement To perform this role successfully, an individual must be able to perform the responsibilities outlined in this to a satisfactory standard. Reasonable accommodations may be made to enable qualified individuals with additional needs to perform the essential functions. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. The role, responsibilities and activities may change at any time with or without notice.

Metrea is a defense company dedicated to translating commercial innovation into solutions for the hardest problems in national security. With deep mission expertise, Metrea focuses on delivering effects-as-a-service across Aerospace, Electromagnetic & Cyber, Digital & Synthetic domains via its capability groups. Metrea also consists of six support groups (Operations, People, Finance, Legal, Strategy and Solutions) that guide the development of specific capabilities that Metrea's files (product, projects, programs etc.) leverage to achieve their targets. Group Overview Air Mobility Group (AIRMOB) is responsible for developing and delivering Metrea's aerial refueling (AAR) capabilities, ensuring the readiness and operational effectiveness of the tanker fleet. AIRMOB oversees fleet management, maintenance, and airworthiness, working to sustain and enhance refueling operations. It manages the integration of new processes and technologies, ensuring that tanker aircraft remain mission-ready through effective logistics, maintenance oversight, and regulatory compliance. By coordinating across various teams, AIRMOB ensures the fleet meets both current and future operational needs, supporting a range of specialized air mobility missions. Position Summary The Aircraft Maintenance Mechanic is responsible for successfully performing all facets of maintenance and documentation on KC-135R aircraft for private, commercial, Air-to-Air Refueling Operations. The Aircraft Maintenance Mechanic is also responsible for daily aircraft inspections in accordance with the approved Air Mobility (AIRMOB) processes. Role and Responsibilities Inspect mechanical components of the KC-135 to identify problems. • Maintain and repair all systems of the KC-135 to include: Hydraulics System - Replace hydraulic components, bleed systems, and diagnose defects. Avionics - Guidance & Control / Radio Communications. Jet Engine - Inspection, engine control rigging, and basic maintenance. Electrics - Use wiring schematics, trace ground, and power faults, and rectify component failures. Minor Fuel system repair, replace seals, in tank fuel probes and fuel system components. Minor Sheet Metal repair, including minor riveting. Aero Repair - Repair, replacement, and rigging of flight control surfaces. Major / Minor aircraft inspections. Multi-Point Refueling System experience is a plus, but not essential. CFM56 2-B jet engine experience is a plus, but not essential. • Perform daily aircraft inspections, launch/recover, refuel / defuel, debrief aircrew, troubleshoot, and repair discrepancies, jack aircraft, tow, and operate all required GSE (Ground Support Equipment). • Follow all safety directives, maintenance procedures, and FAA regulations Remain current on all required training and certifications • Accurately record aircraft maintenance in the automated maintenance records system. • Flight-line driving • All other duties assigned Skills and Experience Education: High school diploma or equivalent Experience: 5+ years working with the KC-135 aircraft, towing, jacking, and hazardous material use, storage, and disposal. Computer Skills: Proficient in Microsoft Office Suite products (specifically Word and Excel) Certificates and Licenses: A&P - Required license. Engine run qualified, and an ASTM NCATT Aircraft Electronic Technician Certificate. Valid Driver's License. Valid Passport Additional Eligibility Qualifications Must be able to accomplish all duties with little or no assistance. Must have good command of the English language; oral and written. Proven and demonstrable attention to detail skills. Excellent problem-solving skills, having the ability to determine causes of errors and deciding on course of action to solve. Comprehensive understanding of company philosophy and processes. Must be able to take initiative and work independently. Excellent communication skills, the ability to read and understand information presented in writing. Our Firmware Metrea's single core value, “rooted in humility,” is supported by four key attributes: entrepreneurial, systematic, discerning, and over-deliver. These attributes, combined, form our Teammate Firmware, our culture. We explore these attributes during the hiring process when we grow our teams and continually support the growth of our culture. We are a hyper-collaborative, dynamically hierarchical organization united by a passion for what we do, how we do it, who we do it with, and who we do it for. Benefits Medical insurance options Dental and vision insurance Retirement plan eligibility Parental leave Work Authorization / Security Clearance Employee must be a US citizen. Secret Security Clearance or the ability to obtain within 1 year of employment start date is preferred, but not required. AAP/EEO Statement Metrea Strategic Mobility, LLC is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law. Position Type and Expected Hours of Work This is a full-time non-exempt position with typical working hours of Monday through Friday, 7:00 a.m. to 4:00 p.m. Hours and work shifts may change in accordance with department and business needs. Non-exempt employees may be required to work over 40 hours per week with approval from the department manager. Work Location Metrea Strategic Mobility 17301 Heacock Street Moreno Valley, CA 92551 Work Environment This job operates in a maintenance facility. This role routinely uses standard equipment such as cold chisels, ground power units for aircraft, integrated maintenance information systems, lifts, metal cutters, power drills, rivet tools, screwdrivers, wearable computing devices, and protective headsets/earplugs. Travel Travel requirements may be up to 50% with at least 60 consecutive days working in India.

TASK DESCRIPTION: Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Airframe/Structural, Corrosion, Landing Gear, Wing/Pylon Fold, Hydraulic/Pneumatic, and mechanical Flight Control Systems Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. Aircraft Mechanic II shall have experience writing with clarity and technical accuracy, and ensure adherence to all applicable policies and procedures. Possess a high degree of expertise in the control and coordination of aircraft maintenance. Thorough working knowledge of applicable maintenance/technical manuals and publications. Thorough working knowledge of aircraft maintenance records. Working understanding of the aircraft and aircraft systems. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Occasionally leads teams. Performs aircraft maintenance functions of the Line, Corrosion Control, and Aircraft Organizational Level maintenance Scheduled and unscheduled maintenance support for assigned H-1 aircraft Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, corrosion control, preservation/depreservation Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in in the activities plan and daily flight schedule Aircraft maintenance action documentation via logs, records, forms, and electronic means Troubleshoot malfunctions in aircraft structure, landing gear, pneumatic, hydraulic, ventilation and heating, flight surfaces and controls, dynamic components, and powerplant systems. Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO). Inspect, repair, replace, and rebuild aircraft components/sub components to include rigging of flight control. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Confined space operations to include fuel cell entry Support Equipment (SE) operation and inspections Preservation and depreservation General aircraft maintenance Requisition repair parts, materials, and consumable supplies through military supply system. Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Perform other tasks as directed. Preferred Qualifications: Five or more years' H-1 rotary wing experience Seven or more years' rotary wing maintenance experience Familiarity and ability to use NAVAIR IETMS. Four or more years' experience with NALCOMIS/OOMA Basic Corrosion Control Course Advanced Corrosion Control Course/Paint and Final Finish Hydraulic Contamination Qualification APU Qualification Aircraft Jacking Qualification Previously certified H-1 CDQAR Basic Qualifications: Four or more years H-1 rotary wing aircraft maintenance experience Must achieve Collateral Duty/Quality Assurance Representative (CD/QAR) AH-1Z & UH-1Y designation for DOL Skill within 90 days of hire Must be able to work 1st, 2nd, 3rdand weekend shift schedule as required Must be able work flexible work-week schedules i.e. M-F or as required Must be able to pass a background check Must be able to obtain favorable National Agency Check with Written Inquires (NACI), IAW DTM-08-003 “Next Generation Common Access Card (CAC) Implementation Guidance or Secret security clearance as required for the position Must be able to climb ladders, raised platforms, and aircraft Must be able to use hand and power tools Must have dexterity to handle small parts Must be able to deploy to support off station exercises and perform other support duties if required Compensation $41.49/hour Other Compensation Employees receive a minimum health and welfare benefit of $2.65 per hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 5.52 hours of PTO per pay period. KAI employees at MAG-39 have 13 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Essential Duties And Responsibilities Other duties may be assigned. Perform all necessary aircraft inspections including, but not limited to: Annual; 100- hour; 50- hour; oil changes. Maintaining aircraft maintenance records per the Code of Federal Regulations for each aircraft. Ensuring all aircraft are airworthy and safe for flight after inspections/repairs. Handling all aircraft line squawks promptly. Be reachable by Supervisor or CBU staff should maintenance need arise. If a maintenance need arises, fly to a specific location to assist a student or flight instructor. Maintain a supply stock of parts as needed for the aircraft. Maintain A&P and IA FAA currency requirements. Make timely reports to the Director of Maintenance on aircraft status. Have maintenance records readily available upon FAA request.

The Riverside County Sheriff's Office is seeking a qualified Aircraft Mechanic in Hemet. Under general supervision, the Aircraft Mechanic maintains turbine helicopters and fixed wing aircraft within the Sheriff's Aviation Unit; and performs other related duties as required. The Aircraft Mechanic is a non-sworn journey level classification assigned to the Sheriff's Aviation Unit and reports to a supervisory or manager level position. Incumbents maintain and repair American Eurocopter AS350, Airbus H-125, Airbus H-145, Pilatus PC-12, as well as other fixed wing aircraft, in accordance with Federal Aviation Administration (FAA) Regulations and manufacturers' specifications. Incumbents may be assigned to the Sheriff's Aviation facility located in Thermal on a permanent or rotational basis. Meet the Team! The law enforcement professionals of the Riverside County Sheriff's Office, with a staff of over 3,600 dedicated men and women, cover the expanse of over 7,300 square miles in southern California. The Sheriff's Office is dedicated to serving the citizens of its communities with integrity, professionalism, leadership, and loyalty and believes in service above self. Who May Apply? This recruitment is open to all applicants. * Maintain and repair American Eurocopter AS350, Airbus H-125, Airbus H-145, Pilatus PC-12, as well as other fixed wing aircraft; conduct pre-flight and post-flight aircraft inspections to ensure airworthiness and compliance with FAA Regulations. * Diagnose, evaluate, and record aircraft maintenance problems, and report the same to supervisor as necessary; maintain parts inventory and order parts through a computerized inventory system. * Repair airframe and fabrication in both composite and sheet metal airframe components. * Perform cleaning, servicing, and major and minor aircraft repairs and modifications; test engines and electrical, mechanical, and hydraulic systems using gauges and other testing equipment. * Adjust, replace, repair, and install any components required for proper aircraft maintenance. Experience: One year in the maintenance and repair of turbine helicopters and fixed wing aircraft. Experience with American Eurocopter AS350, Airbus H-125, Airbus H-145, Pilatus PC-12, and the Pratt & Whitney PT6 powerplant preferred. Knowledge of: FAA Regulations governing the maintenance of turbine helicopter and a variety of fixed wing aircraft; inventory control; computer systems typical of parts ordering; recordkeeping and reporting procedures. Ability to: Test, diagnose, repair, airframes and hydraulic, electrical, mechanical, and fuel systems; communicate effectively in written and oral form; maintain a variety of shop and service records. Other Requirements License/Certificate: Possession of a valid California Driver's License throughout employment. Possession of a valid Airframe and Powerplant Mechanics (A&P) Certificate issued by the FAA. Within 30 days of hire, mechanics are required to furnish the necessary standard and metric hand tools required to perform the essential duties of the position. For more information regarding the position, please contact the recruiter, Ulysses Gerardo, at ************** or via email at ******************.

The Sheriff's Department is recruiting for Aviation Mechanics who perform skilled airframe and powerplant maintenance, repairs and modifications on fixed-wing and rotary-wing aircraft, participate in flight checks, ensure air worthiness, and maintain records, reports, and logs. For more detailed information, view the Sheriff's Aviation Mechanic job description. Inspection License Differential - $1.50/hour for hours worked for employees who possess a valid Federal Aviation Inspection License. Annual Tool Allowance - $650 Annual Boot Allowance - $150 On-Call Compensation As Needed - $4.00/hour EXCELLENT BENEFITS To review job-specific Benefits refer to: Summary of Benefits Memoranda of Understanding MOU CONDITIONS OF EMPLOYMENT 1) Background: Prior to appointment, applicants will be fingerprinted and must pass an extensive background investigation, including a polygraph examination. Applicants must not have been convicted of a felony. 2) Shift: Applicants must be available for all shifts; incumbents will be required to work rotating shifts, or be on call for work, on weekends, holidays, and evenings, including mandatory overtime; refusal of assigned shift may result in removal from the list or termination. 3) License: A valid California Class C Driver License is required to carry out the essential job-related functions of this position. Mileage reimbursement and proof of automobile liability insurance must be maintained. 4) Physical: Requires the following physical demands: frequently stoop, bend, crawl, and work on knees for up to thirty (30) minutes; frequently climb and work on ladders for as long as thirty (30) minutes; occasionally lift and/or move parts weighing up to fifty (50) pounds. 5) Tools: Aviation Mechanics must provide their own set of basic hand tools at the time of appointment; current annual tool allowance is $650. 6) Sponsorship: Please note San Bernardino County is not able to consider candidates who will require visa sponsorship at the time of application or in the future. Experience: One (1) year of experience in the maintenance and repair of helicopters or fixed wing turbo or turbine engine aircraft. * - AND -- License/Certificate: Must possess a current FAA Airframe and Powerplant license; indicate certificate number and expiration date on application under "Certificates and Licenses." An excellent candidate for this position will possess recent experience in the maintenance and repair of Bell 212, Bell 412 and UH-1H, Airbus H125 helicopters, as well as experience with fixed-wing, light single and twin-engine airplanes; factory trained experience is preferred. In addition, the ideal candidate will possess his/her own tools and be willing to work overtime, weekends, and holidays. Examination: There will be a competitive evaluation of qualifications based on a review of the Application and Supplemental Questionnaire. It is to your advantage to provide as much relevant and detailed work experience as possible, as resumes will not be reviewed in lieu of the application materials. Application Procedure: Applications will be reviewed and processed on a continuous basis. Interested applicants are encouraged to apply as soon as possible as this recruitment may close at any time. Resumes will not be accepted in lieu of the application and/or supplemental questionnaire. To ensure timely and successful submission of your online application, please allow ample time to complete and submit your application. Once your application has been successfully submitted you will receive an onscreen confirmation and an email. We recommend that you save and/or print these for your records. Please note, if you do not receive an onscreen confirmation and an email acknowledging our receipt of your application we have not received your application. If you need technical assistance, review the Government Jobs online application guide or contact their Toll-Free Applicant Support line at **************. Please note that Human Resources is not responsible for any issues or delays caused by your internet connection, computer, or browser when submitting an application. All communications regarding the selection process will be via email. Applicants are encouraged to check their e-mails frequently to obtain any correspondence associated with this recruitment. Please be sure the email provided on this application is always current; it is your responsibility to update your personal information. Update your Spam, Junk, Bulk and Firewall settings as needed to ensure that you receive all information pertaining to this recruitment. Equal Employment Opportunity (EEO) / Americans with Disabilities Act (ADA): San Bernardino County is an Equal Employment Opportunity (EEO) and Americans with Disabilities Act (ADA) compliant employer, dedicated to ensuring equal employment opportunities for all employees and applicants. ADA Accommodation: If you have a disability and require accommodations in the testing process, please follow this link to the Special Testing Accommodations Request Form to complete and submit your request within one week of the recruitment filing deadline. Veterans' Preference: Eligible veterans and their spouses or widows/widowers who are not current County employees may receive additional Veterans' Preference points. For details and instructions on how to request these points, please refer to the Veterans' Preference Policy. For more important details, review the links below: Guide to Completing a County Job Application Applicant Information and the County Employment Process

General Purpose This position is responsible for performing electrical and mechanical maintenance and repairs on a variety of controls, receivers, transmitters, computers and process indicators to maintain the water treatment plant and remote pump stations. In addition, this position is responsible for performing the duties of a water plant operator. Union Affiliation: American Federation of State County and Municipal Employees (AFSCME) Pay Grade 17: $ 32.49 - $36.22 Hourly Remote Tier 1: Zero (0) days remote/week For more information on this position including schedule, on-the-job training, and additional compensation opportunities, click here. Essential Job Functions * Troubleshoot and repair instrumentation, including but not limited to, repair or replace all electronic and mechanical instruments used in chemical dosages, monitoring flows, starting and stopping pumps, set alarm points, calibrate transmitters, receivers and recorders, etc. * Repair and rebuild all rotating equipment; maintain large pumps (up to 500 h.p.), diesel pump, diesel electric unit, vacuum pumps, blowers, air compressors, large electric valves, and chemical feed pumps, as well as a variety of other equipment such as ventilators, heating systems, dehumidifiers and air conditioners. * Repair and maintain electrical equipment such as wire in new pumps, new alarm points, and remote switches; troubleshoot, alter, repair and replace parts such as relays and brakes. * Check and maintain reservoir and high service tanks, including but not limited to, inspect tanks and record readings, inspect pumps, piping, buildings, grounds, and uninterrupted power supply and make repairs, etc. * Change, add, or delete parts of the computer program in the three process computers; may write new programs as necessary. * Serve as Plant Operator simultaneously performing Plant Mechanic duties. * Schedule equipment runs; record elapsed time reading and schedule pumps, blowers, and chemical feed pumps for even time distribution and maintenance. * Maintain parts and supplies; order parts, stock and inventory. * Develop, implement and/or maintain computerized preventative maintenance program for all plant and offsite equipment. * Brief Plant Operators on any problems or special situations which affect operation of plant. * Recommend design changes in the water plant. * Provide technical expertise to consultants, engineers and contractors on large scale plant changes and new systems. * Schedule factory representatives' visits; schedule systems and special projects to be worked on or experimented with in conjunction with factory service personnel. * Attend training programs to keep skills and knowledge current with improvements and changes in plant equipment. * May be required to participate in "On-Call Coverage". Non-Essential Job Functions: * Performs other duties as required. Qualifications/Basic Job Requirements * Ability to actively support City diversity, equity, and cultural competency efforts within stated job responsibilities and work effectively across diverse cultures and constituencies. * Demonstrated commitment to diversity, equity and inclusion as evidenced by ongoing trainings and professional development. * High school diploma or equivalent required. * Completion of mechanical or electrical program at a two (2) year technical college and 1 (one) year experience in a water plant performing preventative and corrective maintenance preferred OR three (3) years working in a water plant or similar industrial or production setting, performing preventative and corrective maintenance or a combination of relevant education and experience preferred. Equivalent education, training and experience which provides the requisite knowledge, skills and abilities for the position is required. * Vermont State Operator Classification, Grade 4C or equivalent required or the ability to obtain above certification within one and one-half (1.5) years of date of hire required. * Previous experience with programmable logic controllers (PLCs) and variable frequency (VFDs) preferred. * Journeyman electrician license preferred. * Ability to work rotating shifts, including weekends and holidays required. * Working knowledge of electrical systems repair and maintenance. * Ability to troubleshoot and repair water plant and pump station mechanical and electrical problems. * Ability to assume Water Plant Operator duties required. * Ability to obtain and maintain a valid VT driver's license required. * Ability to operate varied equipment such as test equipment, computers, welders, torches, drill press and grinders, etc, required. * Ability to maintain effective work relationships with other staff members. * Demonstrated ability to perform physical aspects of position. * Ability to obtain Forklift Operator certification required. * Respond to emergencies on weekends/evenings required. * Regular attendance is necessary and is essential to meeting the expectations of the job functions. * Ability to understand and comply with City standards, safety rules and personnel policies. Additional Information Promoting a culture that reveres diversity and equity The City of Burlington is proud to be an equal opportunity employer, and we are strongly committed to creating a dynamic and equitable work-force that mirrors the population and world that we serve. We do not discriminate on the basis of political or religious affiliation, race, color, national origin, place of birth, ancestry, age, sex, sexual orientation, gender identity, marital status, crime victim status, veteran status, disability, HIV positive status, or genetic information in employment or the provision of services. In addition to being an equal opportunity employer we actively encourage applicants who can contribute to our growing diversity to apply. Applications for our employment opportunities are only accepted online through our Government Jobs website. For accessibility information or alternative formats, please contact Human Resources Department at ************ or ************************. The City of Burlington is proud to offer full time employees a comprehensive benefits program that includes: * Medical/Dental Insurance Coverage * Prescription Drug Coverage * Flexible Spending Programs * Short-Term Disability Insurance * Paid Leave (Sick and Vacation) * Pension Plan * Contributory Retirement Plan * Life Insurance * Discounted Gym Memberships * Free Yoga Membership to Sangha Studios (Burlington, Williston & online) * Tuition Discounts for Champlain College TruEd * Employee Assistance Program * Wellness Bonus Incentives Program * Local & National Store Discounts * Subsidized Transportation Options * Qualifying employer for Public Service Loan Forgiveness For additional details please visit *************************************************** 01 I acknowledge that I must have a valid driver's license with no suspensions for the past two years. * Yes * No Required Question Employer City of Burlington, Vermont Address 200 Church Street, Suite 102 Burlington, Vermont, 05401 Phone ************ Website ****************************

Job Description Are you a skilled, experienced mechanic looking to take the next step in your career? Look no further! Our reputable automotive repair shop is seeking a talented Lead Mechanic to handle our advanced mechanical work. As the Lead Mechanic, you will play a pivotal role in maintaining our high standards of quality and customer satisfaction. If you're passionate about cars, thrive in a fast-paced environment, and possess exceptional leadership skills, we want to hear from you! Responsibilities: In this role, you will lead a team of dedicated mechanics, providing guidance and expertise to ensure efficient and accurate repairs. Your responsibilities will include diagnosing and repairing a variety of vehicle makes and models, conducting routine maintenance, and overseeing all aspects of advanced mechanical needs. Requirements: Proven experience as a mechanic, with a strong background in automotive repair and maintenance. Demonstrated leadership skills, with the ability to motivate and guide a team to success. Proficiency in diagnosing and repairing a wide range of vehicle issues. Excellent attention to detail and a commitment to delivering top-notch workmanship. Strong communication skills to liaise with customers and team members effectively. Why Join Us: We offer a competitive salary of $28-40 an hour, plus paid benefits and the opportunity for overtime. As a valued member of our team, you will have the chance to work in a supportive environment where your skills and contributions are recognized and appreciated. Please note that applicants must supply their own tools to be considered for this position. In addition to great pay and a supportive environment, we offer the following fantastic benefits: Tire Pros Benefits Health Insurance Dental Insurance Employee Discount Program Paid Time Off (Accrued Vacation and Sick hours) Vision Insurance ABOUT US Tire Pros has been providing our customers with high-quality products and services for years. We offer top-of-the-line tire brands as well as automotive repair and maintenance services. Whether it's a tires, alignment, brakes, suspension, or preventive care, it's no problem for our team. Our goal is to provide professional service and a hassle-free experience, every time. We have a rock-solid reputation for providing excellent services, support, and satisfaction. We build relationships for the long haul. We know that we would not be able to provide this level of service without our hard-working team. We value each employee and encourage growth. We do our best to attract and retain the highest-caliber employees by providing a fun and friendly work environment along with excellent training and development, competitive compensation, and top-tier benefits. Apply now to start your exciting new career with a strong and stable company. Ready to take the driver's seat in your career? Don't miss out on this exciting opportunity to become our Lead Mechanic! Apply now by submitting your resume and a brief cover letter outlining your relevant experience and why you're the perfect fit for our team. We can't wait to welcome you aboard! Job Posted by ApplicantPro

People. Passion. Pride. This is what has driven our teams since 1833. Since that time, we have developed to become a critical partner in the global aviation industry, delivering time-critical logistics services at over 300 locations in 65 countries, across 6 continents. But at the heart of our business is our people. Role Purpose The aircraft Fueler responsibility is to the safe and efficient fueling/defueling and servicing of aircrafts at the airport. You will need to perform simple mathematical functions such as adding, subtracting, multiplying, and dividing with regards to weight, measurement and volume to interpret aircraft weight and balance loading instructions as they pertain to fueling. This role requires you to maintain a safe and secure work environment, in accordance with local health, safety, and security policies and procedures. This job is at Ontario International Airport Pay: $20.50/hr. What you will be doing * Perform fueling in a safe and efficient manner, drive and operate fuel trucks, hydrant cards, and stationary carts to fuel aircraft. * Responsible for accurate accounting of fuel transactions * Perform daily Quality Control checks on equipment, maintain equipment in clean and functional condition. * Ensure the correct loading and balancing of fuel. * Responsible for defueling aircraft as directed. Safety, Security, Wellbeing and Compliance: You will have a responsibility and duty whilst at work to take reasonable care of the health, safety and wellbeing of yourself and others in accordance with provided information, training, and workplace health and safety rules or procedures. The company is committed to providing a safe working environment for all staff members. In all areas of our business there is a potential risk to the health, safety and welfare to everyone on our sites through the misuse of alcohol and drugs. As such the Company prohibits such misuse and carries out regular testing to enforce our Substance Misuse Policy. What we are looking for: * Ability to proficiently read, write and speak English and perform basic math calculations * Handle fueling carts and fueling hoses which will require you to lift and move up to 70lbs. * Work is done primarily outdoors; must be comfortable working in all weather conditions. * Must be available and flexible to work variable shifts including weekends and holidays. * Prior experience preferred including possession of a Commercial Driver's License or experience in the Oil and Gas Industry (preferred) * Must pass pie-employment medical and Drug testing. * Valid driver's license in good standing; (for Cargo Fuelers, class A license with hazmat and tanker endorsement required) * Must be available and flexible to work variable shifts including weekends and holidays. * Work is done primarily outdoors, must be comfortable working in all weather conditions. * Must pass driver's test with the Department of Airports and obtain a driver's license to drive on Airport Operational Area (AOA). * Must pass FBI background check and obtain US Customs seal. * Prior Ramp experience preferable. * Must be at least 18 years of age. Diversity Menzies Aviation are a committed equal opportunity employer and encourage applications for suitably qualified and eligible applicants regardless of sex, race, disability, age, sexual orientation, gender reassignment, religion or belief, marital status, pregnancy, and maternity. We strive to create an inclusive working environment, where the different knowledge, perspectives, experiences, and approaches of our global workforce are represented. Where everyone feels valued and can reach their full potential. Please be aware that as part of our recruitment process, we may look to use a variety of resourcing tools to help us understand your skills and experience in relation to the role. Please feel free to contact the recruiter below, if there are any reasonable adjustments to our process that you would like us to consider. As part of our recruitment process, we will always consider how candidates fit with our values which you can learn more about here. Application Instructions Is this role ticking all the boxes for you? If so, please click apply now!

Metrea is a defense company dedicated to translating commercial innovation into solutions for the hardest problems in national security. With deep mission expertise, Metrea focuses on delivering effects as-a-service across a spectrum of domains including Air & Space, Electromagnetic & Cyber, and Synthetic. Metrea Management provides central services to eleven (11) global capability units via Operations, Solutions, Strategy, Legal, and Finance teams. Capability Unit Metrea Strategic Mobility (MSM) operates a fleet of Boeing KC-135R aircraft, offering an air-to-air refueling service that seamlessly, safely, and professionally integrates into military aviation training and operations. Position Summary To perform this job successfully, an individual must be able to perform each essential duty listed below satisfactorily. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions. Work Location Metrea Strategic Mobility Flightline 17301 Heacock St Moreno Valley CA 92551 Role and Responsibilities Inspect mechanical components of the Boeing KC-135 to identify discrepancies. Maintain and repair all systems of the Boeing KC-135 to include: Major / Minor aircraft inspections. Hydraulics System - Replace hydraulic components, bleed systems, and diagnose discrepancies. Jet Engine - Inspection, engine control rigging, and basic maintenance. Electrics - Use wiring schematics, trace ground, and power faults, and rectify component failures. Minor Fuel system repair, replace seals, in tank fuel probes and fuel system components is a plus, but not essential. Minor Sheet Metal repair, including minor riveting is a plus, but not essential. Aero Repair - Repair, replacement, and rigging of flight control surfaces is a plus, but not essential. Multi Point Refueling System experience is a plus, but not essential. CFM56 2-B / F108 jet engine experience is a plus, but not essential. Avionics - Guidance & Control / Radio Communications experience is a plus, but not essential. Perform daily aircraft inspections, launch/recover, refuel / defuel, debrief aircrew, troubleshoot, and repair discrepancies, jack aircraft, tow, and operate all required GSE (Ground Support Equipment). Follow all safety directives, maintenance procedures, and FAA regulations Remain current on all required training and certifications Accurately record aircraft maintenance in the automated maintenance records system. Flight-line driving. All duties assigned. Skills and Experience Education: High School Diploma or equivalent Experience: 5+ years working with heavy commercial aircraft or any military airframe. towing, jacking, and hazardous material use, storage, and disposal. Must have A&P, IA, engine run qualified, and an ASTM NCATT Aircraft Electronic Technician Certificate. Proven and demonstrable attention to detail skills. Excellent problem-solving skills, determining causes of errors and deciding on the course of action to solve. Comprehensive understanding of company philosophy and processes. Must be able to take initiative and work independently. Excellent communication skills, the ability to read and understand the information presented in writing, diagrams, and schematics. Computer Skills: Basic skills in Microsoft Office Suite Programs Our Culture Metrea's single core value “rooted in humility” is supported by four key attributes; entrepreneurial, systematic, discerning & over-deliver which combined; form our Teammate Firmware, our culture. These attributes are explored during the hiring process, when we grow our teams and continually support the growth of our culture. We are a hyper-collaborative, dynamically hierarchical organization united by a passion for what we do, and how we do it, who we do it with, and who we do it for. Benefits Health and welfare. Retirement plan eligibility. Work Authorization / Security Clearance The employee must be a US citizen. The employee must be able to hold and maintain a Secret Clearance Level. AAP/EEO Statement Metrea Special Management LLC (MAM) is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law. Position Type and Expected Hours of Work This is a Part-time position with typical working hours of Monday through Friday, 7:00 a.m. to 4:00 p.m. Hours and work shifts may change in accordance with department and business needs. Non-exempt employees may be required to work over 40 hours per week with approval from the department manager. Part-time non-exempt employees must obtain approval from the department manager before working over 29 hours per week. Hours and work shifts may change by department and business needs. Significant travel is required to carry out assigned maintenance tasks and air operations successfully. Travel Travel requirements are: Up to 50% away from home. Work Environment This job operates in a clerical, office setting. This role routinely uses standard office equipment such as computers, phones, photocopiers, and filing cabinets. Physical Demands This position involves daily physical activity such as walking, lifting, reaching overhead Reasonable Accommodations Statement To perform this role successfully, an individual must be able to perform the responsibilities outlined in this to a satisfactory standard. Reasonable accommodations may be made to enable qualified individuals with additional needs to perform the essential functions. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. The role, responsibilities and activities may change at any time with or without notice.

Metrea is a defense company dedicated to translating commercial innovation into solutions for the hardest problems in national security. With deep mission expertise, Metrea focuses on delivering effects-as-a-service across Aerospace, Electromagnetic & Cyber, Digital & Synthetic domains via its capability groups. Metrea also consists of six support groups (Operations, People, Finance, Legal, Strategy and Solutions) that guide the development of specific capabilities that Metrea's files (product, projects, programs etc.) leverage to achieve their targets. Group Overview Air Mobility Group (AIRMOB) is responsible for developing and delivering Metrea's aerial refueling (AAR) capabilities, ensuring the readiness and operational effectiveness of the tanker fleet. AIRMOB oversees fleet management, maintenance, and airworthiness, working to sustain and enhance refueling operations. It manages the integration of new processes and technologies, ensuring that tanker aircraft remain mission-ready through effective logistics, maintenance oversight, and regulatory compliance. By coordinating across various teams, AIRMOB ensures the fleet meets both current and future operational needs, supporting a range of specialized air mobility missions. Position Summary The Aircraft Maintenance Mechanic is responsible for successfully performing all facets of maintenance and documentation on KC-135R aircraft for private, commercial, Air-to-Air Refueling Operations. The Aircraft Maintenance Mechanic is also responsible for daily aircraft inspections in accordance with the approved Air Mobility (AIRMOB) processes. Role and Responsibilities * Inspect mechanical components of the KC-135 to identify problems. * Maintain and repair all systems of the KC-135 to include: * Hydraulics System - Replace hydraulic components, bleed systems, and diagnose defects. * Avionics - Guidance & Control / Radio Communications. * Jet Engine - Inspection, engine control rigging, and basic maintenance. * Electrics - Use wiring schematics, trace ground, and power faults, and rectify component failures. * Minor Fuel system repair, replace seals, in tank fuel probes and fuel system components. * Minor Sheet Metal repair, including minor riveting. * Aero Repair - Repair, replacement, and rigging of flight control surfaces. * Major / Minor aircraft inspections. * Multi-Point Refueling System experience is a plus, but not essential. * CFM56 2-B jet engine experience is a plus, but not essential. * Perform daily aircraft inspections, launch/recover, refuel / defuel, debrief aircrew, troubleshoot, and repair discrepancies, jack aircraft, tow, and operate all required GSE (Ground Support Equipment). * Follow all safety directives, maintenance procedures, and FAA regulations Remain current on all required training and certifications * Accurately record aircraft maintenance in the automated maintenance records system. * Flight-line driving * All other duties assigned Skills and Experience Education: * High school diploma or equivalent Experience: * 5+ years working with the KC-135 aircraft, towing, jacking, and hazardous material use, storage, and disposal. Computer Skills: * Proficient in Microsoft Office Suite products (specifically Word and Excel) Certificates and Licenses: * A&P - Required license. * Engine run qualified, and an ASTM NCATT Aircraft Electronic Technician Certificate. * Valid Driver's License. * Valid Passport Additional Eligibility Qualifications * Must be able to accomplish all duties with little or no assistance. Must have good command of the English language; oral and written. * Proven and demonstrable attention to detail skills. * Excellent problem-solving skills, having the ability to determine causes of errors and deciding on course of action to solve. * Comprehensive understanding of company philosophy and processes. * Must be able to take initiative and work independently. * Excellent communication skills, the ability to read and understand information presented in writing. Our Firmware Metrea's single core value, "rooted in humility," is supported by four key attributes: entrepreneurial, systematic, discerning, and over-deliver. These attributes, combined, form our Teammate Firmware, our culture. We explore these attributes during the hiring process when we grow our teams and continually support the growth of our culture. We are a hyper-collaborative, dynamically hierarchical organization united by a passion for what we do, how we do it, who we do it with, and who we do it for. Benefits Medical insurance options Dental and vision insurance Retirement plan eligibility Parental leave Work Authorization / Security Clearance Employee must be a US citizen. Secret Security Clearance or the ability to obtain within 1 year of employment start date is preferred, but not required. AAP/EEO Statement Metrea Strategic Mobility, LLC is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law. Position Type and Expected Hours of Work This is a full-time non-exempt position with typical working hours of Monday through Friday, 7:00 a.m. to 4:00 p.m. Hours and work shifts may change in accordance with department and business needs. Non-exempt employees may be required to work over 40 hours per week with approval from the department manager. Work Location Metrea Strategic Mobility 17301 Heacock Street Moreno Valley, CA 92551 Work Environment This job operates in a maintenance facility. This role routinely uses standard equipment such as cold chisels, ground power units for aircraft, integrated maintenance information systems, lifts, metal cutters, power drills, rivet tools, screwdrivers, wearable computing devices, and protective headsets/earplugs. Travel Travel requirements may be up to 50% with at least 60 consecutive days working in India.

**EXAMPLES OF WORK** EXAMPLES OF WORK PERFORMED IN THIS CLASSIFICATION INCLUDE, BUT ARE NOT LIMITED TO, THE FOLLOWING TASKS. THESE TASKS MAY BE AMENDED OR OTHER TASKS MAY BE ASSIGNED AS NECESSARY. + Inspects and certifies aircraft at specific intervals as required by OEM and FAA. + Troubleshoots system malfunctions, performs necessary corrective actions. + Documents maintenance of aircraft on appropriate forms. + Removes and replaces defective components. + Complies with Service Bulletins, Instructions, and Airworthiness Directives as directed. + Performs maintenance on Ground Support equipment. + Performs preflight/post-flight turnaround inspections and servicing when required. + Maintains aircraft logbooks and historical data as required. + Complies with safety, foreign object damage, and tool control program requirements. + Washes, waxes, clean and maintains exterior and interior of aircraft. + Serves as a point of contact with the Quality Assurance Representative. + Advises management of problems that may delay scheduled delivery of aircraft to the customer. + Ensures materials issued for assigned tasks are the correct items to repair the problem. + Provides on-the-job training to new employees as required. + Supervises and inspects maintenance performed by FAA-certified and non-certified personnel. + Services oxygen, nitrogen, tires, oil, and hydraulic systems. + Performs Corrosion Control checks when required. + Assists with monitoring maintenance of aircraft fleet. + Provides technical support to the customer concerning the fleet. + Assigns mechanics to specific aircraft on a daily basis. + Communicates with customers regarding aircraft status. + Provides guidance to subordinate employees and peers when appropriate, collaborating and cooperating with other members of the management team. + Implements the performance appraisal system for employees under the incumbent's supervision. + Approves or disapproves subordinate employees' performance and recommends action of corrective procedures. + Implements in-service training programs to communicate current information and procedures to employees under the incumbent's supervision and evaluates training programs to determine their effectiveness in improving staff performance. + Recommends and maintains uniform procedures and standards of operation for the Department. + Evaluates the efficiency of operations within the Department and recommend appropriate changes. + Assists with the recruitment, selection, discipline, and training of personnel. + Greets visitors. + Exhibits positive courteous behavior with customers businesses and coworkers. + Assists coworkers and those in other departments to successfully perform job tasks and functions when necessary. + Follows all safety procedures and practices as established by the Company and regulatory bodies. + This job does have supervisory responsibilities. **INCUMBENT PERFORMS OTHER JOB-RELATED TASKS AS ASSIGNED AND REQUIRED; ANY DUTIES/TASKS INCLUDED IN THE EMPLOYEE'S PERFORMANCE EVALUATION ELEMENTS ARE ESSENTIAL TO THAT EMPLOYEE'S POSITION WITHIN THE JOB CLASSIFICATION.** **MINIMUM QUALIFICATIONS** The following minimum qualifications have been identified by subject matter experts (SME'S) who have supervised this position or functioned in the position; they are based on job analysis information supplied by these SME'S. However, if a candidate believes he/she is qualified for the job although he/she does not have the minimum qualifications set forth below, he/she may request special consideration through substitution of related education and experience, demonstrating the ability to perform the essential functions of the position. Any request to substitute related education or experience for minimum qualifications must be addressed to the Director of Human Resources in writing, identifying the related education and experience which demonstrates the candidate's ability to perform all essential functions of the position. If a candidate believes he/she needs a reasonable accommodation to meet these minimum qualifications or, if called for an interview, to attend such an interview, the candidate must notify the Director of Human Resources in writing of the need for the accommodation and identify the specific accommodation requested. **EDUCATION and/or EXPERIENCE:** Graduation from a standard four (4) year high school or equivalent (GED) AND seven (7) years of experience in work directly related to aircraft maintenance of which two years must have been a lead role making airworthiness decisions. **CERTIFICATES, LICENSES, REGISTRATIONS, and EQUIPMENT:** A & P License Sufficient aviation maintenance hand tools to perform routine Airframe and Powerplant duties **KNOWLEDGE, SKILLS, ABILITIES, AND OTHER CHARACTERISTICS:** The following skills and abilities are required: + understanding and using the English language both oral and written to communicate information or ideas to another person or persons; + writing routine reports and correspondence; + reading and interpreting documents such as safety rules, operating and maintenance instructions, and procedure manuals; + adding, subtracting, multiplying, and divide into all units of measure, using whole numbers, common fractions, and decimals; + interpreting a variety of instructions furnished in written, oral, diagram, or schedule form; + planning and organizing; + creating, entering, retrieving, and printing from current software packages such as; Excel and Word; + demonstrating problem analysis and independent decision making; + demonstrating leadership; delegation of tasks and duties; motivating subordinates; discerning priorities; + demonstrating intra and interpersonal relations; + recognizing or identifying the existence of a problem as well as elements of a problem; + performing a task in the presence of distracting stimulation or under monotonous conditions without significant loss of thought process and efficiency; + perceiving and feeling such attributes of objects and materials as size, shape, temperature, or texture; + operating hand and power tools; + traveling worldwide with limited notice; obtain a security clearance; obtain a passport and/or visa; + interpreting drawings, specifications, and schematics of aircraft instrument/electronic components; + recognizing from schematics and drawing not only how one assembly functions but also how various assemblies interact with each other; Knowledge of the following is required: + databases sufficient to perform the job, duties, and tasks associated with the position; + aircraft sheet metal repair and component repair; + instrument, electronic and electrical test equipment; + military or commercial aviation maintenance and its terminology; and + U.S. government regulations for federal contractors and FAA maintenance programs **PHYSICAL DEMANDS:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand, walk, and taste or smell. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. **WORK ENVIRONMENT:** The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, and the risk of electrical shock. The employee is occasionally exposed to high, precarious places; toxic or caustic chemicals; outside weather conditions; risk of radiation; and vibration. The noise level in the work environment is usually moderate. Vertex is committed to building a diverse and inclusive environment in which we recognize and value each other's differences as well as fostering a culture that promotes its core values: Professionalism, Integrity, and Respect. As an equal opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, or status as a protected veteran. \#MAINT \#VET Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Task Description: Aircraft Mechanic I (23021): (Flightline) Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair. May be required to be licensed by Federal Aviation Administration. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Blade/Pylon Fold, Power Plants and related Sub-Systems, Fuel and Air Systems, Rotor Systems, and related Sub-systems Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. Aircraft Mechanic I shall have experience writing with clarity and technical accuracy, and ensure adherence to all applicable policies and procedures. Possess a high degree of expertise in the control and coordination of aircraft maintenance. Thorough working knowledge of applicable maintenance/technical manuals and publications. Thorough working knowledge of aircraft maintenance records. Working understanding of the aircraft and aircraft systems. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. Performs all other required duties as applicable and assigned by supervision. Performs aircraft organizational level maintenance functions on H-1 aircraft. Scheduled and unscheduled maintenance support for assigned H-1 aircraft Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, corrosion control, preservation/de-preservation Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in in the activities plan and daily flight schedule Aircraft maintenance action documentation via logs, records, forms, and electronic means Troubleshoot malfunctions in aircraft structure, landing gear, pneumatic, hydraulic, ventilation and heating, flight surfaces and controls, dynamic components, and powerplant systems. Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment. Inspect, repair, replace, and rebuild aircraft components/sub components to include rigging of flight control. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Confined space operations to include fuel cell entry Support Equipment (SE) operation and inspections General aircraft maintenance Requisition repair parts, materials, and consumable supplies through military supply system. Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Perform other tasks as directed. Preferred Qualifications: Five or more years rotary wing maintenance experience Previously certified Collateral Duty Inspector (CDI) for Line and/or Power Plants Completed NATEC Course Automated Track and Balancing System (ATABS) Basic Corrosion Control Previously certified Hydraulic Contamination Previously certified H-1 Plane Captain Basic Qualifications: Two or more years' rotary aircraft maintenance experience Must achieve Collateral Duty Inspector (CDI) AH-1Z & UH-1Y designation for DOL Skill within 90 days of hire Must be able to work shift maintenance as required. Must be able work flexible work-week schedules as required. Must be able to climb ladders, raised platforms, and work on top of and below aircraft Must be able to use hand and power tools. Must have dexterity to handle small parts. Must be able to deploy to support off station exercises and perform other support duties as assigned. Must satisfactorily complete a National Agency Check Local Records Check and Credit (NACLC) or Access National Agency Check. Must be eligible for Common Access Card (CAC). Compensation $39.28/hour Other Compensation Employees receive a minimum health and welfare benefit of $2.65 per hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 5.52 hours of PTO per pay period. KAI employees at MAG-39 have 13 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Task Description: Aircraft Mechanic I (23021): Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic, hydraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair. May be required to be licensed by Federal Aviation Administration. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Federal Aviation Administration (FAA) licensing of contractor employee technical proficiency is not required. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Airframe/Structural, Landing Gear, Launch/Arresting, Wing/Pylon Fold, Hydraulic/Pneumatic, mechanical Flight Control Systems, Power Plants and related Sub-Systems, Fuel and Air Systems, Hydraulic/Pneumatic Systems, Rotor Systems, Flight Control Systems, Transmission Drive Systems, Avionics/Electrical Systems and related Sub-Systems, and Aircraft Logs and Records Administration * Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. * Aircraft Mechanic I shall have experience writing with clarity and technical accuracy, and ensure adherence to all applicable policies and procedures. * Possess a high degree of expertise in the control and coordination of aircraft maintenance. * Thorough working knowledge of applicable maintenance/technical manuals and publications. * Working understanding of the aircraft and aircraft systems. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: * Performs aircraft maintenance functions of the Line, Corrosion Control, and Aircraft Organizational Level maintenance * Scheduled and unscheduled maintenance support for assigned H-1 aircraft * Performs aircraft Daily Turn Around Inspections * Performs aircraft launch and recovery operations * Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, corrosion control, preservation/de-preservation * Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in in the activities plan and daily flight schedule * Aircraft maintenance action documentation via logs, records, forms, and electronic means * Troubleshoot malfunctions in flight surfaces and controls, dynamic components and hydraulic systems. * Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO). * Inspect, repair, replace, and rebuild aircraft components/sub components to include rigging of flight control. * Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. * Confined space operations to include fuel cell entry * Support Equipment (SE) operation and inspections * Aircraft inspections * Aircraft movement * Support services * General aircraft maintenance * Technical Directive compliance and modifications * Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment * Perform shift work and/or overtime as required * Perform phase, scheduled, unscheduled, periodic, and other hourly or calendar inspections. * Requisition repair parts, materials, and consumable supplies through military supply system. * Perform other tasks as directed. Preferred Qualifications: * Three or more years' H-1 rotary wing experience * Five or more years' rotary wing maintenance experience * Familiarity and ability to use NAVAIR IETMS. * Four or more years' experience with NALCOMIS/OOMA * Advanced Corrosion Control Course/Paint and Final Finish * Hydraulic Contamination Qualification * APU Qualification * Aircraft Jacking Qualification * Previously certified H-1 CDI/CDQAR Basic Qualifications: * Individual (I) Aircraft Maintenance Qualification * Basic Corrosion Control Course * Two years aviation maintenance experience * Must be able to work shift schedules as required per Performance Work Statement (PWS) * Must be able work work-week schedules i.e. M-F, Sn-Th or as required per PWS * Must be able to pass a background check * Must be able to obtain favorable National Agency Check with Written Inquires (NACI), IAW DTM-08-003 "Next Generation Common Access Card (CAC) Implementation Guidance or Secret security clearance as required for the position * Must be able to climb ladders, raised platforms, and aircraft * Must be able to use hand and power tools * Must have dexterity to handle small parts * Must be able to pass employment physicals * Must be able to deploy to support off station exercises and perform other support duties if required Compensation $41.24/hour Other Compensation Employees receive a health and welfare benefit of $6.25 per hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 5.52 hours of PTO per pay period. KAI employees at HMLAT 303 have 14 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

General Purpose This position is responsible for performing preventative and corrective maintenance at any of the three wastewater treatment plants and pump stations. Also responsible for performing all general tasks involved in maintaining division operations and property. Union Affiliation: American Federation of State County and Municipal Employees (AFSCME) Pay Grade 17: $32.49 - $36.22 Hourly Remote Tier 1: Zero (0) days remote/week Essential Job Functions * Assist Chief Operator in maintaining wastewater treatment plant, conventional activated sludge, anaerobic digesters, and chemical precipitation, biological nutrient removal, and storm water treatment. * Maintain onsite stormwater treatment facility. * Monitor and record data from wastewater equipment. * Operate and perform light maintenance on small equipment. * Operate pumps, valves, gates, engines and other machinery and equipment while performing maintenance. * Perform preventative and corrective maintenance on all plant equipment including pump rebuilding, motor maintenance, lubrication, use of inspection equipment, cleaning equipment, and calibration of chemical feed pumps and controls. * Ability to diagnose abnormalities in complex controls, including programmable logic controllers (PLCs) interface and interlocked control schemes. * Fill out daily operating sheets, preventative maintenance logs, safety and training logs, and inspection logs. * Follow written safety compliance procedures including but not limited to Lockout/Tagout and Permit Confined Space entry. * Compliance with NFPA 70E. * Observe, report and assist with maintenance or other correction of abnormal conditions within mechanical processes, including safe working conditions. * Perform building and grounds custodial duties. * Participate in formalized training courses for fulfillment of state, federal or job requirements. * Ability to be on call as required. * Response to emergencies on weekends/evenings expected. Non-Essential Job Functions: * Performs other duties as required. Qualifications/Basic Job Requirements * Ability to actively support City diversity, equity, and cultural competency efforts within stated job responsibilities and work effectively across diverse cultures and constituencies. * Demonstrated commitment to diversity, equity and inclusion as evidenced by ongoing trainings and professional development. * High school diploma or equivalent required. * Applicant is required to have at least 2 years of experience directly working in a preventative and/or corrective maintenance roll. Equivalent education, training and experience which provides the requisite knowledge, skills and abilities for the position is required. * Applicants possessing one or more of the following is preferred: * Three (3) years working in a wastewater plant or other industrial setting, performing preventative and corrective maintenance OR * Journeyman or Master Electrician. OR * Completion of mechanical or electrical program at a two (2) year technical college and 1 year experience in a wastewater plant performing preventative and corrective maintenance OR * Three (3) years directly working with pumps, motors, gear boxes, etc. * Ability to obtain a Grade 1 DM Wastewater certification for the State of Vermont within two (2) years from date of hire required. Higher Grade DM Wastewater certifications are strongly encouraged. * Previous experience with programmable logic controllers (PLCs) and variable frequency drives (VFDs) preferred. * Ability to obtain Forklift Operator certification required. * Demonstrated ability to perform physical aspects of position. * Valid Vermont State Driver's license. * Ability to maintain and evaluate simple records and to interpret blueprints and electrical diagrams. * Ability to maintain effective work relationships with other staff members. * Ability to perform electrical and mechanical maintenance. * Ability to comprehend and carry out written, oral and diagrammatic instructions. * Ability to diagnose complex abnormalities in mechanical and electrical systems, including chemical dosing pumps and controls. * Ability to perform ordinary arithmetic calculations involving decimals and fractions. * Satisfactory completion of training courses in mechanical/electrical maintenance fields required. * Regular attendance is necessary and is essential to meeting the expectations of job functions. * Ability to understand and comply with City standards, safety rules and personnel policies. Additional Information Promoting a culture that reveres diversity and equity. The City of Burlington is proud to be an equal opportunity employer, and we are strongly committed to creating a dynamic and equitable work-force that mirrors the population and world that we serve. We do not discriminate on the basis of political or religious affiliation, race, color, national origin, place of birth, ancestry, age, sex, sexual orientation, gender identity, marital status, crime victim status, veteran status, disability, HIV positive status, or genetic information in employment or the provision of services. In addition to being an equal opportunity employer we actively encourage applicants who can contribute to our growing diversity to apply. Applications for our employment opportunities are only accepted online through our Government Jobs website. For accessibility information or alternative formats, please contact Human Resources Department at ************ or ************************. The City of Burlington is proud to offer full time employees a comprehensive benefits program that includes: * Medical/Dental Insurance Coverage * Prescription Drug Coverage * Flexible Spending Programs * Short-Term Disability Insurance * Paid Leave (Sick and Vacation) * Pension Plan * Contributory Retirement Plan * Life Insurance * Discounted Gym Memberships * Free Yoga Membership to Sangha Studios (Burlington, Williston & online) * Tuition Discounts for Champlain College TruEd * Employee Assistance Program * Wellness Bonus Incentives Program * Local & National Store Discounts * Subsidized Transportation Options * Qualifying employer for Public Service Loan Forgiveness For additional details please visit *************************************************** 01 Do you have at least 2 years of professional experience directly working in a preventative and/or corrective maintenance? * Yes * No 02 I acknowledge that I must have a valid driver's license with no suspensions for the past two years. * Yes * No Required Question Employer City of Burlington, Vermont Address 200 Church Street, Suite 102 Burlington, Vermont, 05401 Phone ************ Website ****************************

This job is at John Wayne Airport Pay: $19.50/hr. Comfortably and continuously lift/move fuel carts and fuel hoses up to 70 lbs. for durations of time. Frequent overhead lifting, bending, stretching push/pulling. * To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. * Ability to safely operate a tractor trailer/tanker filled with liquid and maintaining a valid driver's license. Ale to lift and attach fuel hose to unload fuel from tanker into facility. * Must possess a California Class A Driver License. * Driving and operating specialized commercial 10,000 USG tankers * Read and interpret aircraft weight and balance loading instructions as it pertains to fueling. * Responsible for accurate accounting of fuel transactions. * Ensure the safe and secure operations, in accordance with the highest possible standards of health, safety, security and all government statutory requirements. * Perform other duties as assigned. Essential Skills and Qualifications: * Must be at least 18 years of age. * Must pass pie-employment medical. * Must pass Drug testing. * Must be able to speak, read and write in English proficiently. * Valid driver's license in good standing; (for Cargo Fuelers, class A license with hazmat and tanker endorsement required) * Must be available and flexible to work variable shifts including weekends and holidays. * Work is done primarily outdoors, must be comfortable working in all weather conditions. * Must pass driver's test with the Department of Airports and obtain a driver's license to drive on Airport Operational Area (AOA). a Must pass FBI background check and obtain US Customs seal. Prior Ramp experience preferable.