Aircraft Mechanic Jobs in Mesa, AZ

At Atomic Transport, we take pride in being a leading local bulk hauling company based out of Chattanooga, TN with a dedicated fleet of company-owned assets and W2 driver employees that specialize in waste transportation from local transfer stations to landfills. With over twenty-five terminals operating locally throughout the Southeast and Midwest, if you are looking for a team to grow with, Atomic Transport is seeking an experienced Mechanic that reside in the , AZ area. Join us in shaping a cleaner and safer future while growing your career with Atomic Transport.

We are seeking an experienced Aircraft Mechanic for a Class IV 14 CFR Part 145 certified repair station specializing in every aspect of aircraft maintenance for the service life of your fleet. We maintain narrow and wide body, small to large, regional to long-haul aircraft and one of the largest storage and reclamation operations in the world. **Responsibilities** + Research technical data and perform disassembly, repair, cleaning, adjustment, assembly, testing, and calibration of aircraft components with company special tools and ground equipment in accordance with applicable maintenance manual, FAA regulations, and company policies and procedures. + Repair, replace, and rebuild aircraft structures such as wings and fuselage, and functional components including rigging, surface controls, plumbing, and hydraulic units. + Read and interpret manufacturers and airlines' maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. + Upon removing units from an aircraft, engine, or other major component or subassembly, complete appropriate identification, inspections, routing tags and forms and make appropriate entries into the Component Removal Log. + Disassemble and inspect aircraft and engine parts for wear, or other defects. + Repair or replace defective engine parts and reassemble and install engine in aircraft. + Adjust, repair, or replace electrical wiring system and aircraft accessories. + Perform miscellaneous duties to service aircraft including cleaning, servicing, greasing, moving parts, and checking brakes. **Essential Skills** + 1-5+ years of experience in aircraft maintenance + Airframe certification required + Current valid driver's license + Proficiency in heavy maintenance, line maintenance, and aircraft repair **Additional Skills & Qualifications** + A&P license preferred + Basic set of tools required **Why Work Here?** Our company offers a comprehensive benefits package including health, dental, vision, disability insurance, and life insurance (STD & LTD). We provide an Employee Wellness Program, 401(k) plan, company-paid holidays, paid time off (PTO), and an Employee Assistance Program. Join our team to enjoy a supportive work environment and opportunities for career growth. **Work Environment** The work environment includes an aircraft maintenance hangar with exposure to high intensity noise levels, extreme changes in temperature, materials identified on Safety Data Sheets, working at heights or around moving machinery, and aircraft fuel tank entry. Physical demands include sitting, standing, and walking for extended periods, frequent bending, stooping, squatting, crouching, kneeling, balancing, and reaching above shoulder level, and occasional crawling, climbing, lifting, carrying, pushing, or pulling weight up to 50 pounds unassisted. The role requires eye-hand coordination, manual dexterity, corrected vision, and hearing to normal range. Equipment operated includes aircraft ground servicing equipment such as tugs, tractors, hi-lifts, trucks, servicing carts, and test equipment, hand tools, rivet guns, and drills. Protective equipment such as goggles, safety glasses, face shields, ear protection, aprons, gloves, and safety harnesses are required. **Job Type & Location** This is a Contract to Hire position based out of Marana, Arizona. We also have locations in Tucson, AZ! **Pay and Benefits** The pay range for this position is $32.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Casa Grande,AZ. **Application Deadline** This position is anticipated to close on Apr 28, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

DEPARTMENT OF PUBLIC SAFETY The Department of Public Safety's mission is to protect human life and property by enforcing state laws, deterring criminal activity, and providing vital support to the state of Arizona and its citizens. Visit our website at ************* AIRCRAFT TECHNICIAN - Fixed Wing Address: Phoenix, AZ Salary: $66,547.94 - $91,501.28 Annually To apply, you must go to the DPS website. Click here and follow the instructions to submit your online application. Job Summary: This recruitment will be used to establish an 18-month eligibility list to fill current and future vacancies. The application period may close without notice. Responsible for field and shop repair and maintenance of fixed-wing aircraft to ensure airworthiness. Under general direction, repairs, overhauls, inspects, maintains, cleans, and returns helicopters and fixed-wing aircraft to service; performs related work as required. Assumes the duties and responsibilities of the Aircraft Technician Supervisor as required. The duties and responsibilities of this class are governed by established maintenance schedules, limitations of shop and field maintenance facilities, and Federal Aviation Administration regulations. All levels of Aircraft Technicians require: 1. high school diploma or possession of a G.E.D. certificate. 2. Possess a valid technician's license with airframe and power plant ratings issued by the FAA. 3. possession of a valid Arizona driver's license. 4. possession of a complete set of aircraft technician's tools. 5. experience in the repair and maintenance of single and multi-engine turbo-prop and reciprocating engine fixed-wing aircraft. 6. absence of violations of FAA regulations. In addition to the above requirements, the following qualifications shall also apply: Requires three (3) years of experience in the last five (5) years, maintaining fixed-wing aircraft, with responsibility for completing major and minor overhauls to return fixed-wing aircraft to flight status. WORKING CONDITIONS/PHYSICAL REQUIREMENTS: May work near moving mechanical parts. May be exposed to toxic or caustic chemicals. May be exposed to outdoor weather conditions. Exposure to loud noise (e.g., heavy motorized equipment). Progression to the next step requires an overall performance rating of at least Standard in the last 12 months. Must successfully complete the examination process. IMPORTANT!!! The Arizona Department of Public Safety (DPS) does not accept applications via AZStateJobs.gov. Our department cannot retrieve, or process applications and resumes sent through this website. To ensure your application is considered, please visit the official AZ DPS website at *************/careers and complete the application process there. Pre-Employment Requirements: Applicants must complete an examination process. A polygraph and background investigation are required for successful applicants. DPS supports a drug-free work environment through pre-employment drug testing. If this position requires driving or using a vehicle as an essential function of the job to conduct State business, then the following requirements apply to Driver's License Requirements. All newly hired State employees are subject to and must successfully complete the Electronic Employment Eligibility Verification Program (E-Verify). If this position requires driving or using a vehicle as an essential function of the job to conduct State business, then the following requirements apply Driver's to License Requirements. All newly hired State employees are subject to and must successfully complete the Electronic Employment Eligibility Verification Program (E-Verify). Benefits: The Arizona Department of Public Safety is proud to offer a comprehensive benefits package to benefit-eligible employees in cooperation with the State of Arizona. • Accrued vacation pay and sick days • 10 paid holidays per year • Deferred compensation plan • Top-ranked retirement plans • Affordable medical, dental, vision, life, and short & long-term disability insurance plans • Employee Assistance, Peer and Family Support Programs • Bus Cards (Subsidized partially by the State) • Paid Parental Leave-Up to 12 weeks per year of paid leave for newborn or newly-placed foster/adopted child (pilot program). Learn more about the Paid Parental Leave pilot program here. For a complete list of benefits provided by The State of Arizona, please visit our benefits page Contact Us: The State of Arizona is an Equal Opportunity/Reasonable Accommodation Employer. Persons with a disability may request a reasonable accommodation such as a sign language interpreter or an alternative format by calling **************. Requests should be made as early as possible to allow sufficient time to arrange the accommodation.

Duties & Responsibilities: Airframe & Powerplant Mechanic The A&P Mechanic is responsible for performing scheduled and unscheduled maintenance of flight school aircraft. The mechanic will be accountable for completing all work in accordance with AeroGuard Company procedures and requirements, as well as all applicable regulatory requirements. Responsibilities include but are not limited to: Must have strong interpersonal and team building skills. Must have excellent written and oral communication skills. Must have the ability to read and understand technical data such as maintenance manuals, parts catalogs, engineering drawings, service bulletins, and airworthiness directives. Must have knowledge of federal regulations relating to Title 14 parts 43 and 91. Assure that work areas are kept clean and organized. Must be able to be flexible and work all shifts on an as needed basis. REQUIREMENTS EDUCATION Airframe and Powerplant license required at the time of hire. Must be able to obtain Inspection Authorization within three months of hire. EXPERIENCE A minimum of three recent and consecutive years of GA experience as a certificated A&P. Experience on Piper aircraft is preferred. G1000 experience is a plus. SKILLS AND ABILITIES Can work independently with the ability to make airworthiness decisions. Ability to manage workflow and adjust priorities as needed. Troubleshoot, repair, inspect, and perform maintenance on company aircraft in accordance with applicable technical data and FAA regulations. Will be required to make aircraft logbook entries and release aircraft for return to service. Must be familiar with Microsoft Office and able to learn Talon RMS computer maintenance program. EQUIPMENT/MACHINERY USED General office equipment such as facsimile, copier, personal computer, etc. Vehicle operation such as company van, truck, golf cart, aircraft etc. as required. Will require the use of various pieces of shop equipment and tools. Exposure to solvents, aviation gasoline, etc. PHYSICAL AND SAFETY REQUIREMENTS Will be working in many environments inside and outside of the facility. Will have extensive exposure to aircraft, simulators, outside conditions and equipment. May have some medium lifting up to 50 lbs. May require prolonged periods of sitting or standing, bending and stooping. OTHERS Extreme attention to detail. Self-starter does not wait for others to provide work, finds ways to keep busy or help others. Flexible/adaptable to fast changing pace and instructions according to flight school priorities. Job Type: Full-time Salary: $30.00 - $41.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Paid time off Retirement plan Vision insurance Schedule: 10-hour shift Day shift Night shift Ability to commute/relocate: Phoenix, AZ 85027: Reliably commute or planning to relocate before starting work (Preferred) Education: High school or equivalent (Preferred) Experience: Aircraft maintenance: 3 years (Preferred) License/Certification: Airframe & Powerplant License (Required) Work Location: In person

High School Teaching/Aviation Teacher Date Available: 07/10/2025 Closing Date: Open till filled Applications are being accepted for an Aircraft Mechanics Instructor position at our Power Campus, 6625 S. Power Rd, Mesa, AZ 85212. This position is open Monday through Friday from 7:30 to 4:00. Position Summary: We are seeking a knowledgeable and passionate Aviation Instructor to join our team and help prepare the next generation of aviation professionals. The ideal candidate will bring real-world experience and instructional expertise to the classroom, contributing to a dynamic and well-rounded aviation program. We value instructors with diverse backgrounds and are particularly interested in candidates with expertise in aircraft mechanic systems. This program prepares individuals to apply technical knowledge and skills in air transportation (flying and/or navigation of aircraft) and hands-on applications, leading to aircraft mechanics certification. This position offers the opportunity to work in a collaborative educational environment, guiding students through hands-on learning, industry-relevant curriculum, and critical skill development that aligns with current aviation standards and practices. Candidates should demonstrate strong communication skills, a commitment to student success, and a willingness to contribute to a team of instructors with varied specializations that enrich the overall program. Job Type: Full-Time, 10-Month Calendar Salary: $50,651.01-$86,896.01 Placement in the range will be based on a combination of education, industry-related experience, teaching experience, and certification. Benefits: EVIT offers a comprehensive benefits package that includes: employer-paid Medical Insurance, Health Savings Account (HSA) employer contribution, basic life insurance, and Employee Assistance Program. Our benefits package also provides a comprehensive choice of voluntary benefits that include dental, vision, supplemental and dependent life insurance, short-term disability, prepaid legal, accident, and critical illness insurance. Please note, that it is mandatory to participate in the Arizona State Retirement System plan (ASRS), which includes the regular contribution rate of 11.86% for retirement and 0.14% for Long-Term Disability per pay period. EVIT matches the retirement contribution dollar for dollar. Minimum Qualifications: Ability to obtain an Arizona Department of Education Secondary or Career & Technical Education (CTE) Certification in the area of Industrial and Emerging Technologies ****************************************************************************** Valid Level 1 IVP Fingerprint Clearance Card through Arizona Department of Public Safety. 3 Years Experience in aviaition mechanics Working knowledge of airplane mechanical systems and components. Preferred Qualifications: Airframe & Powerplant license. Information about EVIT East Valley Institute of Technology (EVIT) is a career technical school that provides high school and adult students with the advanced skills and training needed to thrive in today's competitive job market. EVIT offers 50 career technical education programs, as well as Associate degrees in Nursing and Surgical Technology. EVIT prepares students for state and national licensing, industry certifications, internships, and the opportunity to earn college credit. EVIT programs are tuition-free for high school students who live within the following school districts: Apache Junction, Cave Creek, Chandler, Fountain Hills, Gilbert, Higley, J.O. Combs, Mesa, Queen Creek, Scottsdale, and Tempe. EVIT offers adult programs that allow adults to improve their current skills or learn new skills. Adult programs have additional fees associated with them. For more information about EVIT, visit ************* EVIT Mission Statement To change lives by loving our students and serving our communities with a career and college preparatory training experience that produces a qualified workforce, meeting the market-driven needs of business and industry. An Equal Opportunity Employer The East Valley Institute of Technology is an equal opportunity employer. We do not discriminate against any individual on the basis of actual or perceived race, color, national origin, sex, disability, age, gender, marital status, religion, veteran or military status, sexual orientation, gender expression or identity, or socioeconomic status. In accordance with Arizona law and Governing Board Policy, the East Valley Institute of Technology maintains a smoke-free, tobacco-free work environment. El Instituto de Tecnología del Valle Este es un empleador que ofrece igualdad de oportunidades. No discriminamos a ninguna persona por motivos reales o percibidos de raza, color, origen nacional, sexo, discapacidad, edad, género, estado civil, religión, condición de veterano o militar, orientación sexual, expresión o identidad de género, o situación socioeconómica. De conformidad con la ley de Arizona y la Política de la Junta Directiva, el Instituto de Tecnología del Valle Este mantiene un ambiente de trabajo libre de humo y tabaco.

This recruitment will be used to establish an 18-month eligibility list to fill current and future vacancies. Application period may close without notice. Responsible for field and shop repair and maintenance of fixed-wing aircraft to ensure airworthiness. Under general direction, repairs, overhauls, inspects, maintains, cleans, and returns helicopters and fixed-wing aircraft to service; performs related work as required. Assumes the duties and responsibilities of the Aircraft Technician Supervisor as required. The duties and responsibilities of this class are governed by established maintenance schedules, limitations of shop and field maintenance facilities, and Federal Aviation Administration regulations. Click here to see exam information for this classification: EXAM PLAN Must successfully complete the examination process, which includes: Written Examination: 100% Weight Physical Assessment: Pass/Fail * Troubleshoots aircraft malfunctions to accurately diagnose and repair problems. * Performs required maintenance and repair of aircraft systems and assemblies, including all hydraulic, electrical, and mechanical components, to maintain airworthiness of aircraft. * Performs inspections of aircraft to determine repair and maintenance work needed, and to recommend the feasibility of repairs. * Conducts and observes tests and systems checks with pilot during test flights to functionally test aircraft systems. * Assists other personnel as required to manipulate large, heavy, or awkward aircraft parts (e.g., the removal or replacement of the engine, main transmission assembly, etc.). * Maintains airframe and fuselage to control corrosion and preserve appearance. * Approves and returns aircraft to service after minor repairs and/or alterations. * Maintains logbooks and other records to provide required documentation of aircraft maintenance and repairs. * Maintains ground support equipment. Knowledge of: * occupational hazards and appropriate safety measures. * Federal Aviation Regulations (FARs) to perform and document aircraft maintenance and repair procedures. Skill in: * diagnosing, troubleshooting, and repairing aircraft and aircraft systems (e.g., mechanical, electrical, hydraulic, structural) involving the use of sophisticated testing equipment, meters, hand and specialized tools, schematics, etc. * interpreting complex technical information (e.g., parts manuals, maintenance manuals, manufacturers' specifications, systems schematics, test data, etc.) to troubleshoot aircraft problems, prepare repair/modification estimates, perform repairs, and inspect aircraft. * the use of chemicals, detergents, and paints to control aircraft corrosion. Ability to: * respond "on call" to on-site and off-site locations to perform aircraft repairs. * move items of up to 85 pounds for distances of up to 100 feet to manipulate aircraft parts. * bend, stoop, and climb as necessary to access aircraft, components, and equipment to make inspections, diagnose malfunctions, and perform repairs. * understand and follow established programs and procedures of the aviation unit. * prepare detailed written documents. * communicate verbally with pilots and technicians to exchange technical information. All levels of Aircraft Technician require: 1. high school diploma or possession of a G.E.D. certificate. 2. possession of a valid technician's license with airframe and power plant ratings issued by the FAA. 3. possession of a valid Arizona driver license. 4. possession of a complete set of aircraft technician's tools. 5. experience in the repair and maintenance of single and multi-engine turbo-prop and reciprocating engine fixed-wing aircraft. 6. absence of violations of FAA regulations. In addition to the above requirements, the following qualifications shall also apply: Requires three (3) years of experience in the last five (5) years, maintaining fixed-wing aircraft, with responsibility for completing major and minor overhauls to return fixed-wing aircraft to flight status. WORKING CONDITIONS/PHYSICAL REQUIREMENTS: May work near moving mechanical parts. May be exposed to toxic or caustic chemicals. May be exposed to outdoor weather conditions. Exposure to loud noise (e.g., heavy motorized equipment). Progression to the next step requires an overall performance rating of at least Standard in the last 12 months. Must successfully complete the examination process. FLSA Status: Non-Exempt

For more than 50 years, Marsh Aviation has been a leader in engineering and innovation for performance and reliability-oriented aircraft upgrades and modifications. The company is known world-wide and specializes in repurposing existing airframes into modern, capable, efficient and cost-effective aircraft. Job Description Aircraft Mechanic The Aircraft Mechanic performs test, repair, installation, and modification on a variety of aircraft systems and structures. General duties include: Maintain, repair, and modify components including but not limited to structural, flight controls, hydraulics, pneumatics, fuel systems, and mechanical components; Able to perform a variety of diagnostic and mechanical duties on turboprop and piston multi-engine aircraft. Responsible for clear, concise and accurate reports in logs, inspection reports, and production documents. Qualifications Experience and Qualifications: FAA Airframe and Powerplant (A&P) certificate is required; Working knowledge of aircraft engines, mechanical systems, and components; Familiar with CFR parts 21 and 145; Able to read and understand approved manuals, Illustrated Parts Breakdowns, Airworthy Directives, Service Bulletins, and other technical service documentation; Working knowledge of 100 hour, annual, and progressive inspection procedures set forth in FAR 43; 10 years + aviation experience; High school diploma or equivalent; Successful candidates must be US Citizens or Permanent Residents. Additional Information All of your information will be kept confidential according to EEO guidelines. Marsh Aviation offers competitive pay and benefits; we invite you to learn more about the company at ********************** Marsh Aviation is an Equal Opportunity Employer.

Are you eager to be part of an innovative team in the aviation industry, transforming the way we approach aviation technology? Our client stands as a prominent figure in the realm of aircraft window design, manufacturing, and the production of composite parts at their cutting-edge facility. Boasting ISO 9001:2015 / AS9100D certification, they specialize in aerospace window/windshield composite intricacies, sheet metal wing spars, and fuselage assemblies. They are currently on the lookout for a Regional Repair Sales / Aircraft Window Technician possessing an A&P License in locations including Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC. What's in It for You: Salary: $45,000-$60,000 annual bonus, potential for substantial monthly incentives Position Type: Permanent - Full-time. Benefits: Comprehensive package including Medical, Dental, 401k, Disability, Company-provided life insurance, and FSA. A Glimpse into the Life of an Aircraft Technician / A&P Mechanic: As the Aircraft Technician / A&P Mechanic, your primary mission is to provide aircraft window services to our existing clients while expanding our customer base and sales within your designated Regional Market. Your responsibilities include inspecting aircraft windows, assessing defects for airworthiness, repairing scratches, pits, and other window damage, as well as removing and installing replacement windshields and windows. Key Responsibilities: Removing existing windows. Preparing and installing new windows. On-call 24/7 to respond to customer requests for emergency AOG (Aircraft on Ground) services. Utilizing an orbital sander with various grits of sandpaper to restore damaged areas. Reviewing, interpreting, and applying technical data relevant to your tasks. Managing the acquisition of purchase orders from customers as per the provided quotes. Coordinating service schedules with aircraft owners/operators and maintenance managers. Completing and submitting billing information and evaluation forms to our headquarters in Wichita, KS. Providing the necessary airworthiness documents to customers upon job completion. Traveling as required to customer locations via ground transportation, air travel, or airlines. Compiling weekly expense reports detailing costs for gasoline, entertainment, and customer relations. Signing off on all work orders and maintaining part traceability records. Conducting daily visits and/or phone communication with both current and potential customers. Developing and expanding sales in the assigned Regional Market. Seeking guidance and direction as needed for your duties. Keeping your supervisor/manager informed of the status of your work. Reporting problems and potential issues to your supervisor/manager as soon as possible. Maintaining a neat and orderly work area. Presenting a well-groomed appearance suitable for the role and context. Respecting the confidentiality of company, customer, and personnel information. Performing additional duties and tasks as assigned by your supervisor. Assisting and training other employees as required. Qualifications: Education: High School Diploma/General Education Degree (GED). Experience: Preferred sales experience, 1 year of orbital sanding experience preferred, auto body experience preferred, previous aircraft experience preferred, A&P license or AMT certificate preferred, sales experience preferred. Technical Skills: Proficiency in using various measuring devices, strong mechanical aptitude, ability to read and interpret blueprints (preferred), ability to read and interpret technical manuals. Problem Solving/Decision Making: Ability to read and comprehend mechanical and technical manuals, applying them to practical field situations. Capability to work independently and communicate effectively with both internal and external customers, delivering exceptional customer service in a timely manner. Essential Job Functions/Physical Demands: The physical demands encompass standing on wings, moving in and out of cockpits, and working inside and outside aircraft. Travel is a requirement, with working hours ranging from 2 to 12 per day depending on demand. Ability to stand and/or sit for 8 hours a day. Ability to lift/carry weights of up to 70 lbs. Ability to twist, bend, and stoop for 8 hours a day. Ability to pinch and grip various tools with fingers and hands, using pushing and pulling motions for 8 hours a day. Ability to reach for 8 hours a day. Clear and effective communication skills. Proficiency in understanding and following work orders and process specifications. Capability to handle buffing and polishing tools for 8 hours a day. Comfort with climbing up and down ladders. If you're intrigued by the Aircraft Technician / A&P Mechanic role in Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC, seize the opportunity today! This job opportunity is presented by Total Aviation Staffing, LLC, an Employment Agency providing aviation staffing services.

Founded in 2000 by three former Royal Canadian Air Force (RCAF) CF-18 fighter pilots who identified an opportunity to improve military readiness training, Top Aces has since established itself as the world leader in contracted adversary air (ADAIR) services and joint terminal attack controller (JTAC) training. We pride ourselves on our unblemished safety record, having flown an industry leading 130,000+ hours of operational training without accident in support of customers worldwide, including Canada, the U.S., Germany, and multiple other NATO allies and international partner nations. Our vision is to be the most trusted provider of innovative defense training solutions, continuously elevating standards in an industry where "Experience Matters." This commitment to innovation and technology ensures we remain adaptable, training allied militaries to succeed against evolving threats. Top Aces' dynamic team contributes to delivering on our purpose of training the next generation of combat leaders by living our values of Service, Integrity, Excellence, and Together every day! Join our team! SUMMARY: The Technicians are an integral part of our Return to Service team. Their experience, practical knowledge, creativity, and problem-solving skills will ensure that the aircraft are assembled in accordance with applicable documentation. ESSENTIAL DUTIES AND RESPONSIBILITIES * Provide aircraft disassembly, reassembly, LRU removal and installation, line maintenance, line servicing and inspection level maintenance tasks as assigned. * Ensure the work accomplished on any aircraft or component is in compliance with: * Applicable airworthiness standards and OEM instructions * Company Policies and Procedures * Regulated safety standards * Ensure that all replacement parts are inspected, eligible, and properly certified prior to installation * Ensure that removed parts are properly tagged and routed to quarantine * Carry out maintenance, repair, modification and daily inspection of the company aircraft as detailed in the company maintenance control manual * Complete and certify work reports for all work accomplished on the aircraft * Read blueprints, interpret schematics, complex technical diagrams and drawings * Follow company procedures as per the maintenance control manual using safe work practices * Carry out both line and heavy maintenance activities in accordance with operational standards * Carry out Independent Checks when authorized as per company policies and procedures * Operate aircraft towing equipment in towing operations * Perform preventive maintenance inspections on aircraft and aircraft systems and subsystems * Operate and service ground support equipment * As an employee, you are responsible for: * Working in compliance with all applicable Occupational Health and Safety (OH&S) acts and regulations. * Following safe work practices and procedures and using safeguards and personal protective equipment, as necessary and when required. * Reporting any hazards or potential safety risks (such as unsafe situations and activities) to a supervisor immediately. * Must be able to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary customer service. * Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices. * Perform related duties as assigned by supervisor. * Maintain compliance with all company policies and procedures. SKILLS AND/OR QUALIFICATIONS * Proven track record of success working on complex assignments requiring considerable judgment, initiative and technical/specialized knowledge * Able to work well in a team and within a fast-paced environment * Motivated, self-starter - able to carry out tasks with minimal supervision * Strong problem-solving abilities * Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers * Computer proficiency (MS Office - Word, Excel and Outlook) CERTIFICATIONS, LICENSES, REGISTRATIONS * FAA Airframe and Power Plant (A&P) license/certification or equivalent experience required * Inspection Authorization (IA) certification a plus EDUCATION AND/OR WORK EXPERIENCE * High school diploma or GED required * Associate degree strongly preferred, Bachelor's Degree or equivalent a plus * A minimum of 5 years overall aircraft maintenance experience PHYSICAL REQUIREMENTS While performing duties of this job, the employee is regularly required to stand, sit, talk, walk and hear. The employee is occasionally required to climb, balance, stoop, kneel, crouch, crawl, and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. This position requires close vision, distant vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is required to regularly work in both office and outside weather environments. The employee frequently works near moving mechanical parts and vibrations, and is frequently exposed to very hot or cold, wet or humid conditions. The employee occasionally works in high, precarious places and is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and risks of electrical shock. The noise level is occasionally very loud. These physical demands and work conditions are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. * Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards * Must be able to lift and carry up to 50 lbs. * Must be able to talk, listen and speak clearly on telephone SPECIAL WORK CONDITIONS * Must be a US Citizen or hold a valid Green Card * Domestic and International Travel may be required This description has been designed to indicate the general nature and level of work being performed by employees working in this position and within this Job classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. #LI-LS1#LI-Remote

We are seeking Aircraft Maintenance Technicians who want to join our team as we build a culture of passionate commitment to execution, simplicity, and customer loyalty at Avelo Airlines. We are a brand-new, high value/low fare airline growing throughout the U.S. You will have a key role in creating an airline our Crewmembers are proud of because we deliver a great customer experience with execution our customers know they can count on. Purpose: As an Avelo Aircraft Maintenance Technician you will ensure the safe, compliant, on-time and efficient maintenance of Avelo aircraft at the line maintenance level. This is achieved by coordinating and executing aircraft maintenance, open transparent communication, and maintaining safety and compliance as Avelo's first line of defense. The Technician will foster and develop teamwork and leadership that embraces our company's "Purpose, Vision, and Values" Responsibilities: * Maintain an understanding of the maintenance program * Coordinate and execute scheduled and unscheduled work loads * Assume "ownership" of the aircraft while on duty * Maintain open communication with Team Leads, Maintenance Control and Pilots * Demonstrated knowledge of Structural Repair Manual conditional use and damage assessment * Participate in the Safety Management System (SMS) Program and promote a 'Safety Always' culture * Understands compliance of FAA Regulatory requirements as it pertains to planning tasks against aircraft daily Requirements * High School diploma (or equivalent * FAA Airframe & Powerplant (A&P) license required * Knowledge of aircraft systems and troubleshooting and MEL/CDL procedures * Must be able to lift 50 lbs. for a distance of 10 feet * Must be able to work outside in inclement weather * Must be able to work shift work, weekends, and holidays * Possible travel for training, deployment and/or issue resolution up to 25% away from base * Must provide own hand tools to meet minimum company tool list * Possesses strong critical thinking and problem-solving/troubleshooting skills * Ability to clearly lead, mentor and instruct other Crew Members * Strong written and verbal communication skills * Current and Valid Driver's License required * Must have the authority to work in the U.S as defined in the Immigrations Act of 1986 * Must be able to complete a background check and pre-employment drug screen X-FACTORS: * 3 years of experience on different types of aircraft with 10 or more seat with an air carrier or certificated repair station preferred * Boeing Systems Fam courses preferred * 737 Line maintenance preferred May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (e.g., emergencies, changes in workload, etc.). Avelo is an equal opportunity employer. Salary Description $32-$40 per hour based on years of experience

Full-time Description We are seeking Aircraft Maintenance Technicians who want to join our team as we build a culture of passionate commitment to execution, simplicity, and customer loyalty at Avelo Airlines. We are a brand-new, high value/low fare airline growing throughout the U.S. You will have a key role in creating an airline our Crewmembers are proud of because we deliver a great customer experience with execution our customers know they can count on. Purpose: As an Avelo Aircraft Maintenance Technician you will ensure the safe, compliant, on-time and efficient maintenance of Avelo aircraft at the line maintenance level. This is achieved by coordinating and executing aircraft maintenance, open transparent communication, and maintaining safety and compliance as Avelo's first line of defense. The Technician will foster and develop teamwork and leadership that embraces our company's “Purpose, Vision, and Values” Responsibilities: Maintain an understanding of the maintenance program Coordinate and execute scheduled and unscheduled work loads Assume “ownership” of the aircraft while on duty Maintain open communication with Team Leads, Maintenance Control and Pilots Demonstrated knowledge of Structural Repair Manual conditional use and damage assessment Participate in the Safety Management System (SMS) Program and promote a ‘Safety Always' culture Understands compliance of FAA Regulatory requirements as it pertains to planning tasks against aircraft daily Requirements High School diploma (or equivalent FAA Airframe & Powerplant (A&P) license required Knowledge of aircraft systems and troubleshooting and MEL/CDL procedures Must be able to lift 50 lbs. for a distance of 10 feet Must be able to work outside in inclement weather Must be able to work shift work, weekends, and holidays Possible travel for training, deployment and/or issue resolution up to 25% away from base Must provide own hand tools to meet minimum company tool list Possesses strong critical thinking and problem-solving/troubleshooting skills Ability to clearly lead, mentor and instruct other Crew Members Strong written and verbal communication skills Current and Valid Driver's License required Must have the authority to work in the U.S as defined in the Immigrations Act of 1986 Must be able to complete a background check and pre-employment drug screen X-FACTORS: 3 years of experience on different types of aircraft with 10 or more seat with an air carrier or certificated repair station preferred Boeing Systems Fam courses preferred 737 Line maintenance preferred May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (e.g., emergencies, changes in workload, etc.). Avelo is an equal opportunity employer. Salary Description $32-$40 per hour based on years of experience

The mission of the Phoenix Police Department is to build and foster strong relationships with the community through our outreach and engagement, while adhering to the highest standards and traditions of the department. The Phoenix Police Department is committed to the Guiding Values of our P.R.I.D.E. Statement: Protection, Responsibility, Integrity, Dedication, and Employee Excellence. The City of Phoenix Police Department is seeking a highly motivated, dynamic, and talented individual with helicopter mechanic experience for the vacant Police Helicopter/Aircraft Technician position at Deer Valley Airport. Police Helicopter/ Aircraft Technicians perform fleet maintenance on helicopters, fixed-wing aircraft, and specialized equipment. The fleet consists of Airbus AS350B3 and Agusta A109e model helicopters and Cessna 172, 182, 210 and Pilatus PC-12 model airplanes. Responsibilities include maintaining helicopter/fixed-wing aircraft and keeping current with industry standards through proactive and on-going training. Work hours: Monday - Friday 6:30am - 13:00pm, or Tuesday - Friday 6:00am - 14:30 pm, or Monday - Thursday 6:00am - 4:30 pm. SALARY Pay Range: $27.49 to $40.61 per hour. Hiring Range: $27.49 to $36.84 per hour Pay Range Explanation: * Pay range is the entire compensation range for the position classification. * Hiring range is an estimate of where you can receive an offer. The actual salary offer will carefully consider a wide range of factors, including your skills, qualifications, experience, education, licenses, training, and internal equity. BENEFITS A comprehensive benefits package is offered which includes: * Traditional pension with employer and employee contributions, click here for more details: Pension Information * 401(a) and 457 plans with employer contributions. * Choice of generous medical HMO, PPO, or HSA/HDHP plans. * Medical enrollment includes a monthly $150 City contribution to a Post-Employment Health Plan. * Wellness incentive of up to $720 annually. * Dental, vision, and life insurance options. * Employer paid long-term disability. * Free Bus/light rail pass. * Tuition reimbursement program up to $6,500 per year. * Paid time off includes 13.5 paid holidays, 12 vacation days, and 15 sick days and personal leave days. * Paid Parental Leave for eligible employees up to 480 hours (12 weeks) of paid leave for the birth, adoption, or foster care placement of a child during a 12-month period. * Federal Student Loan Forgiveness offered through Savi. For more details, visit: Unit 002 Benefits. MINIMUM QUALIFICATIONS * Three years of experience within the past five years maintaining helicopters and fixed wing aircraft. * Other combinations of experience and education that meet the minimum requirements may be substituted. * All finalists for positions are subject to a criminal background check applicable to the department or position. * Some positions require the use of personal or City vehicles on City business. Individuals must be physically capable of operating the vehicles safely, possess a valid driver's license and have an acceptable driving record. Use of a personal vehicle for City business will be prohibited if the employee is not authorized to drive a City vehicle or if the employee does not have personal insurance coverage. * For information regarding pre-screening and driving positions, click here. * Positions in the Police Department must meet the background standards that are appropriate to non-sworn positions. The general factors for disqualification are listed here. * The City job description can be found here. PREFERRED QUALIFICATIONS The minimum qualifications listed above, plus: * Candidates with helicopter maintenance experience, Airbus H125 / AS350B3 aircraft is strongly preferred. * Experience performing 150 hr., 150 hr. / 12-month, 750 hr. and 750 hr. / 12-month inspections on Airbus AS350B3 helicopters. * Have a complete set of standard and metric aircraft mechanics tools by time of hire. * Have current airframe and power plant mechanic experience within the last 6 months. * Be FAA certified airframe and power plant mechanic (A&P) at time of application. RECRUITMENT DATES Recruitment closes April 23, 2025. All materials must be received by 11:59 p.m. on this date. This is a position-based recruitment and will not result in any ongoing eligibility list. This recruitment and any selection processes resulting from this recruitment may be used to fill other related vacancies within the organization now or in the near future. HOW TO APPLY Apply online by completing the required information and attaching, as one document, your cover letter and resume. Please include your experience as it relates to the qualifications stated above. Only the highest qualified may be posted to the eligible to hire list. The results of the resume screening process will be sent to your primary email address. WE ARE HERE TO HELP * Job interviews may be held by video or audio conference. * If you are in need of computer resources, click here for free options. * Arizona at Work has frequent classes to help with resume writing, interviewing skills, and general career guidance. Click here for more information. * Explore other Employment Opportunities with the City of Phoenix. * Subscribe to receive e-mail notifications about new employment opportunities. * If you need assistance applying for this job, please contact our HR Connection Center at **************. REFERENCE Aircraft Technician, JC:75010, ID# 57530, 04/07/2025, USM, BL, Benefits: 002. Building the Phoenix of tomorrow. #DoWorkThatMakesPhoenixWork City of Phoenix is an equal opportunity employer. AmeriCorps, Peace Corps, and other national service alumni who meet the required qualifications are encouraged to apply.

We are seeking Aircraft Maintenance Technicians who want to join our team as we build a culture of passionate commitment to execution, simplicity, and customer loyalty at Avelo Airlines. We are a brand-new, high value/low fare airline growing throughout the U.S. You will have a key role in creating an airline our Crewmembers are proud of because we deliver a great customer experience with execution our customers know they can count on. Purpose: As an Avelo Aircraft Maintenance Technician you will ensure the safe, compliant, on-time and efficient maintenance of Avelo aircraft at the line maintenance level. This is achieved by coordinating and executing aircraft maintenance, open transparent communication, and maintaining safety and compliance as Avelo's first line of defense. The Technician will foster and develop teamwork and leadership that embraces our company's “Purpose, Vision, and Values” Responsibilities: Maintain an understanding of the maintenance program Coordinate and execute scheduled and unscheduled work loads Assume “ownership” of the aircraft while on duty Maintain open communication with Team Leads, Maintenance Control and Pilots Demonstrated knowledge of Structural Repair Manual conditional use and damage assessment Participate in the Safety Management System (SMS) Program and promote a ‘Safety Always' culture Understands compliance of FAA Regulatory requirements as it pertains to planning tasks against aircraft daily Requirements High School diploma (or equivalent FAA Airframe & Powerplant (A&P) license required Knowledge of aircraft systems and troubleshooting and MEL/CDL procedures Must be able to lift 50 lbs. for a distance of 10 feet Must be able to work outside in inclement weather Must be able to work shift work, weekends, and holidays Possible travel for training, deployment and/or issue resolution up to 25% away from base Must provide own hand tools to meet minimum company tool list Possesses strong critical thinking and problem-solving/troubleshooting skills Ability to clearly lead, mentor and instruct other Crew Members Strong written and verbal communication skills Current and Valid Driver's License required Must have the authority to work in the U.S as defined in the Immigrations Act of 1986 Must be able to complete a background check and pre-employment drug screen X-FACTORS: 3 years of experience on different types of aircraft with 10 or more seat with an air carrier or certificated repair station preferred Boeing Systems Fam courses preferred 737 Line maintenance preferred May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (e.g., emergencies, changes in workload, etc.). Avelo is an equal opportunity employer. Salary Description $32-$40 per hour based on years of experience

3:30 pm to 2:00 am Monday through Thursday Inspects and determines airworthiness of aircraft, aircraft systems, equipment, and parts in compliance with specifications and applicable government regulations. Performs preflight and post flight inspections ensuring that all inspection forms are accurately completed. Works from approved drawings, FAA Regulations or other specifications JOB RESPONSIBLITIES * Carries out aircraft inspections, verifying and controlling specific documentation according to the inspection process. * Prepares reports on maintenance services and spare parts supplier performance such as: rejected/ non-compliance parts status, specified name, parts provided, quantities, discrepancies, technical performance, classifications, technical opinion, & recommendations. * Performs stock re-inspections. * Performs shipping inspections. * Monitors and verifies quality in accordance with control processes. * Ensures that all inspections are properly performed on all completed work in accordance with internal procedures and FAA requirements. * Files work orders and inspection forms in such a manner that the specific file pertaining to an assembly or unit can be located by the Chief Inspector promptly. * Conducts preliminary, hidden damage, inspection continuity, and final inspection on items repaired. * Performs review inspections on aircraft and components to monitor the quality of work performed and the adequacy of standards and equipment. * Performs occasional/random work package audits to ensure that documentation is maintained in accordance with Federal Aviation Regulations. * Performs "self-audits" of internal quality systems, and audits at the request of the customer. * Assists the Chief Inspector in analyzing and interpreting quality data in order to develop methods, procedures, and systems to improve the Quality Assurance functions. * Performs special assignments and projects, as directed by the Chief Inspector. ESSENTIAL KNOWLEDGE, SKILLS AND ABILITIES Education: * High School/ GED * Desired: A.S. degree in Aviation * A&P License. Experience: * Generally, at least 5-7 years of experience as an aircraft A&P Mechanic. * Prior Inspector work experience with aerospace quality systems that meet FAA requirements. * Experience working with and interpreting, precision measurement instruments. Knowledge, Skills & Abilities: * Assignments require Comprehensive Knowledge of all possible tasks and responsibilities within their Technical Area. * Skills are broadly applied in multiple Technical Areas. * Knowledge of machines and tools, including their uses, repairs and maintenance. * Knowledge of principles and processes for providing customer service. * Skilled with repairing, troubleshooting, installing and equipment maintenance. * Knowledge of FAA requirements for aircraft maintenance procedures * Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components. Working Conditions / Environment/ Special Requirements * Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations. * As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 "Respirator Protection" regulations with no restrictions that would prevent the proper use and/or seal of the respirator. * Ability to work flexible hours and different shifts if required * Employees will be subject to the random drug and alcohol testing under FAA regulations GENERAL COMMITMENT FOR ALL EMPLOYEES * Commitment to company values and complies with department norms, policies, directives, and procedures. * Incorporates Lean and P3E processes and concepts into daily activities. * Strive for continuous improvement to processes and procedures. * Honors and protects confidential and proprietary documents and information. * Satisfies work schedule requirements. The job description is not designed to cover or contain a comprehensive listing of all activities, duties or responsibilities that are required by the employee. Performs other duties as assigned Embraer is an Equal Opportunity Employer.

Aircraft Maintenance Technician IV A&P - Sign On Bonus/Relocation Available in GAC Mesa Unique Skills: Our aircraft are industry leaders and so are our people. We're looking for talented, motivated individuals who are ready to do innovative work, and we offer exciting career opportunities worldwide. Mulitple shifts available - 1st shift, 2nd shift and Weekend Nights Education and Experience Requirements High School Diploma or GED required. 6 years aviation maintenance experience (avionics, electrical, and/or mechanical). A&P (FAA Airframe and Powerplant) license required. Valid Driver's License required. Position Purpose:Perform various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Perform aircraft maintenance and perform troubleshooting and repair duties requiring a high degree of accuracy and skill.Job Description Principle Duties and Responsibilities:Essential Functions: Perform required. maintenance and necessary servicing of all aircraft mechanical systems . Repair, maintain, install, and troubleshoot mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems . Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements . Properly complete work order sign-offs, shift turnovers, and other paperwork in a timely manner . Ensure that all work accomplished meets quality standards and specifications . Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely . Follow standard operating procedures and JSAs when operating ground support equipment . Operate and oversee use of special support equipment used in removal and installations of major components . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean . Properly use and maintain company-provided tools and equipment . Coordinate movement of aircraft, as required. . Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 224797 Category: Service Center Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 04/30/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Maintenance Technician IV A&P - Sign On Bonus/Relocation Available Company: Gulfstream Aerospace Corporation Aircraft Maintenance Technician IV A&P - Sign On Bonus/Relocation Available in GAC Mesa Unique Skills: Our aircraft are industry leaders and so are our people. We're looking for talented, motivated individuals who are ready to do innovative work, and we offer exciting career opportunities worldwide. Mulitple shifts available - 1st shift, 2nd shift and Weekend Nights Education and Experience Requirements High School Diploma or GED required. 6 years aviation maintenance experience (avionics, electrical, and/or mechanical). A&P (FAA Airframe and Powerplant) license required. Valid Drivers License required. Position Purpose: Perform various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Perform aircraft maintenance and perform troubleshooting and repair duties requiring a high degree of accuracy and skill. Job Description Principle Duties and Responsibilities: Essential Functions: * Perform required. maintenance and necessary servicing of all aircraft mechanical systems . * Repair, maintain, install, and troubleshoot mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems . * Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements . * Properly complete work order sign-offs, shift turnovers, and other paperwork in a timely manner . * Ensure that all work accomplished meets quality standards and specifications . * Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely . * Follow standard operating procedures and JSAs when operating ground support equipment . * Operate and oversee use of special support equipment used in removal and installations of major components . * Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: * Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean . * Properly use and maintain company-provided tools and equipment . * Coordinate movement of aircraft, as required. . * Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned. Other Requirements: * Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems. * Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). * Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 224797 Category: Service Center Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 04/30/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Phoenix Job Segment: Aerospace, Inspector, Accounts Payable, Electrical, Aviation, Quality, Finance, Engineering

Full-time Description Maintenance Technicians are responsible to the Maintenance Supervisor and shall assure that the procedure outlined in this manual as well as all FAA Regulations and manufacturer's instructions are complied with. In addition to all responsibilities listed below, work involves the responsibility of performing routine maintenance, and major inspections on HondaJet, Piper, TBM, Pilatus, LearJets, Beechjet, Citations and other corporate aircraft. Troubleshooting, repair, and modification of aircraft systems and engines is accomplished by this position. In addition, component removal and reinstallation, operational checks, leak checks, and engine runs are all within the responsibility of the AMT. The AMT is responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution. Essential Functions and Responsibilities: Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator. Responsible for planning and coordinating the activities of their shop or area, so as to minimize delays and increase production and efficiency. Ensure that all work accomplished will be completed in strict accordance with the manufacturer's maintenance and repair instructions and TITLE 14 CFR part 43. Exercise all reasonable care to protect all parts- sub assembles; major assembles and completed units against loss or damage. Ensure that all applicable repair station forms utilized are properly completed. Ensure good housekeeping rules are observed and that all shop-working areas are kept clean and orderly at all times. Ensure that proper tools and equipment are available, and those tools are maintained in serviceable condition and ensure that any tool which is found unserviceable for any reason will be removed from service. He will be responsible for good housekeeping and will ensure that housing and facilities and safety precautions are adequate. Ensure proper handling of parts and the preservation of all units or parts during the work process through the maintenance department. Required to be thoroughly familiar with the requirements of the repair station manual, FAA Regulations, Airworthiness Directives and Advisory Circulars, Manufactures Service Letters/Bulletins and engineering orders. Communicates with the maintenance lead technicians concerning progress of the assigned work. Perform airframe and powerplant repairs, inspections and modifications. Removal and disassembly of defective parts, assembly and installation of replacement parts and testing of system. Interpret technical manuals, drawings and blueprints. Ensure that all discrepancies are signed off with all the information completed, such as part numbers, maintenance manual, ATA and Chapter, etc. Displays and promotes a positive attitude toward work and other employees. Use experience and technical expertise to assist when necessary to meet completion and production schedules and produce the quality our company has come to expect. Assure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks. Identify any employees' problems and concerns and deal with them, if unable to solve the problems, forward them to management. Technicians shall have all their work inspected (except for off-site maintenance, see off-site maintenance requirements) by an appropriately rated inspector as listed on the Roster of Management Supervisory and Inspection Personnel at the completion of each task. Participates with management to strategize and implement new maintenance tactics. Provide leadership and communication to subordinates and employees. Performs related work as assigned. Requirements Education: Seven or more years related experience and/or training; or equivalent combination of education and experience. Airframe and Powerplant (A&P) Certificate (Preferred). Experience: Seven or more years demonstrated experience in aircraft maintenance inspections and repairs. Strong understanding in 135 and 145 repair station operations/regulations required. Minimum Work Experience Requirement: Clean driving record. Able to pass a background check. Ability to pass a drug screening test. Ideal candidate will have the following work styles: Attention to detail. Persistence in the face of obstacles. A willingness to take on responsibilities and challenges. Being reliable, responsible, and dependable, and fulfilling obligations. Being pleasant with others on the job and displaying a good-natured, cooperative attitude. Being sensitive to others' needs and feelings and being understanding and helpful on the job. Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods. Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations. Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace. Results oriented Proven ability to achieve goals. Follows through and meets deadlines; Strong organizational, multi-tasking and time management skills; Strong problem-solving and analytical skills. Communication Oral Communication speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Participates in meetings. Written Communication Writes material in clear concise terms.

Launch Your Career with ATP Flight School! We're thrilled that you're considering a career journey with us! If you're passionate about general aviation and want to be part of our Aircraft Maintenance team, while we are not actively hiring for this location, we encourage you to submit your resume for expected future openings. Our talent team will reach out to discuss this opportunity. Why Join ATP? $5,000 sign-on bonus for Certificated AMTs $1,000 sign-on bonus for Apprentice AMTs No shift work-ever! ATP offers a supportive work environment and a comprehensive employee benefits program designed to invest in you and your future. Take the first step today-send us your resume and get ready to soar with ATP!

Duties & Responsibilities: Airframe & Powerplant Mechanic The A&P Mechanic is responsible for performing scheduled and unscheduled maintenance of flight school aircraft. The mechanic will be accountable for completing all work in accordance with AeroGuard Company procedures and requirements, as well as all applicable regulatory requirements. The available shifts for this position are as follows: Friday through Sunday from 6 am to 6 pm (1 opening) Responsibilities include but are not limited to: Must have strong interpersonal and team building skills. Must have excellent written and oral communication skills. Must have the ability to read and understand technical data such as maintenance manuals, parts catalogs, engineering drawings, service bulletins, and airworthiness directives. Must have knowledge of federal regulations relating to Title 14 parts 43 and 91. Assure that work areas are kept clean and organized. Must be able to be flexible and work all shifts on an as needed basis. REQUIREMENTS EDUCATION Airframe and Powerplant license required at the time of hire. EXPERIENCE A minimum of two recent and consecutive years of GA experience as a certificated A&P. Experience on Piper aircraft is preferred. G1000 experience is a plus. SKILLS AND ABILITIES Can work independently with the ability to make airworthiness decisions. Ability to manage workflow and adjust priorities as needed. Troubleshoot, repair, inspect, and perform maintenance on company aircraft in accordance with applicable technical data and FAA regulations. Will be required to make aircraft logbook entries and release aircraft for return to service. Must be familiar with Microsoft Office and able to learn Talon RMS computer maintenance program. Must have basic hand tools. EQUIPMENT/MACHINERY USED General office equipment such as facsimile, copier, personal computer, etc. Vehicle operation such as company van, truck, golf cart, aircraft etc. as required. Will require the use of various pieces of shop equipment and tools. Exposure to solvents, aviation gasoline, etc. PHYSICAL AND SAFETY REQUIREMENTS Will be working in many environments inside and outside of the facility. Will have extensive exposure to aircraft, simulators, outside conditions and equipment. May have some medium lifting up to 50 lbs. May require prolonged periods of sitting or standing, bending and stooping. OTHERS Extreme attention to detail. Self-starter does not wait for others to provide work, finds ways to keep busy or help others. Flexible/adaptable to fast changing pace and instructions according to flight school priorities. Job Type: Full-time Salary: $30.00 - $41.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Paid time off Retirement plan Vision insurance Schedule: 8 or 10-hour shift Day shift Night shift Ability to commute/relocate: Chandler, AZ 85286: Reliably commute or planning to relocate before starting work (Preferred) Education: High school or equivalent (Preferred) Experience: Aircraft maintenance: 2 years (Preferred) License/Certification: Airframe & Powerplant License (Required) Work Location: In person