Aircraft mechanic jobs in Milford, CT - 338 jobs

Maintenance/Custodial/Maintenance General Date Available: as soon as possible Closing Date: open until filled Primary Functions Performs a variety of installation, maintenance, alteration, replacement, preventive maintenance and repair tasks on various plumbing fixtures, piping (water, waste, drainage and heating) and systems support equipment, including swimming pool and irrigation systems throughout the various facilities. Include all aspects of the plumbing trade, designing and installing new installations and modifications to existing systems, repairs to all types of piping and piping systems. Cover the duties of the Heating System Mechanic when assigned. Performing all assigned duties in a safe and professional manner and in accordance with Town and Board policies and follows all federal, state and municipal code and ordinances that affect the work being accomplished. These include OSHA and EPA regulations, state licensing requirements, and State and Local code requirements, as well as any other laws, regulations, ordinances, policies, etc. that may apply. Skills and abilities Ability to read and interpret blueprints and engineering drawings, particularly as they pertain to plumbing, irrigation and heating systems and controls. Ability to operate and maintain all tools and equipment used in these trades. Ability to lift a maximum of fifty(50)pounds. Ability to crawl into and work in confining spaces, such as pipe chases/tunnels, top of, or behind, boilers, and from ladders or staging on overhead pipes, boilers, equipment, etc., safely and in accordance with all laws and regulations pertaining to the work including OSHA confined space regulations. Minimum qualifications This person shall; (1) be a U.S. Citizen, (2) be a vocational, trade or high school graduate, or have completed the G.E.D., (3) possess a valid drivers license and a clean driving record, (4) have the ability to read and write the English language at the 8th grade level, and (5) possess the ability to read and interpret blueprints and engineering drawings as they pertain to the particular trade. Must hold CT P1 license for plumbing and S2 license for heating. An F1 or F2 license for fire protection would be a plus. At least five (5) years experience in the plumbing trade and two (2) years experience in the operation, maintenance and repair of low pressure steam and circulating hot water boilers. Must have demonstrable experience in the servicing and maintaining of HVAC equipment, and working knowledge of pneumatic controls, air compressors, and related equipment. Working Conditions Subject to exposure to inadequate light and ventilation. Will be required to wear eye, face, head, hand, foot, hearing and respiratory protection when needed. Will be required to follow all safety procedures at all times. The Board of Education will provide safety equipment required for the safe conduct of the work in accordance with state and federal regulations, town policies and bargaining unit contract. Physical demands Stands, walks, stoops, kneels, lifts, and works in all types of positions. Must be able to lift 50 pounds maximum. Must be able to handle the physical demands of the job, and work at heights on roofs, power hoists, ladders and staging. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. NOTE: This job description is a guide and not all-inclusive of tasks and responsibilities that are part of this position.

Full-time Description Aircraft Technician - Join a Skilled, High-Energy Maintenance Team Long Island, NY | Ventura Air Services $45-$70/hr based on experience | Full-Time | On-Site If you're the type of A&P mechanic who can fix just about anything and thrives on variety, challenge, and quality workmanship-you're exactly who we're looking for. At Ventura Air Services, we've been maintaining and flying aircraft since 1955. We're not just a maintenance shop-we're a Part 135 charter operator and FAA-certified repair station, handling everything from heavy inspections to complex mods. If you're tired of turning the same wrench on the same aircraft every day, come work somewhere where every day is different. What You'll Be Working On: Routine maintenance and major repairs on a variety of business jets and turboprops Daily work includes aircraft from our Challenger 604 and Citation XL fleet, plus many others Diagnosing issues, troubleshooting systems, and executing efficient, quality repairs Collaborating with fellow techs, avionics specialists, and leadership to keep aircraft mission-ready Expanding your skillset through ongoing, hands-on experience Requirements What We're Looking For: Valid A&P License (required) 5+ years of aircraft maintenance experience Experience with Challenger or Citation aircraft is preferred, but not required Comfortable working across airframes and systems Strong avionics knowledge is a plus Tech savvy - especially with Microsoft Office and Adobe Acrobat Must meet physical requirements of general aircraft maintenance Clean driving record and able to pass background check + drug testing Perks & Benefits: $45-$70/hour starting, based on experience Medical, dental, and vision coverage 401(k) with company match Ongoing training & employee development programs A team that values skill, hustle, and initiative If you're ready to put your experience to work in a fast-paced, high-performance environment where no two days are the same-Ventura is the place to be. Salary Description $40.00+

The LUH72 Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as drills. Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. Perform other qualified duties as assigned. Minimum Qualifications Valid FAA A&P Certification. Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work site. Tools are Required, must provide own tools and toolbox. Tools must be shadowed and etched with PID. Knowledge & Skills Knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Working knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders. Physical Requirements/Working Environment May work in Aircraft maintenance hangar or outside. May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure. May be exposed to extreme noise from turbine and jet engine aircraft. May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft. Service Contract Act (SCA) Compensation & Benefits: This is an hourly, overtime-eligible position that falls under the Service Contract Act (SCA). In accordance with the Health and Welfare provisions of the SCA, and in addition to your base hourly rate, you may be eligible to receive an additional health and welfare payment for each hour you work to ensure compliance with the minimums set forth by the act. The amount you are entitled to receive will vary depending upon the fringe benefits you select now and in the future. Compensation Details: $37.83 The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. Benefits Overview: Our health and welfare benefits are designed to support you and your priorities. Offerings include: Health, dental, and vision insurance Paid time off and holidays Retirement benefits (including 401(k) matching) Educational reimbursement Parental leave Employee stock purchase plan Tax-saving options Disability and life insurance Pet insurance Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. Original Posting: 01/21/2026 - Until Filled Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Northeast Aero is seeking skilled and motivated technicians with a hunger for knowledge and a passion for aviation repair to join our team. We currently have open positions in Pneumatic, Rotating, Fuel, Electro/ Mechanical and Hydraulics. Our ideal candidate is a team player and has a passion for working with their hands, utilizing various tools, materials and specialized testing equipment to test and repair aircraft components in accordance with OEM and/or customer specifications. The technician's responsibilities will be testing, troubleshooting, tearing down and building aircraft components. All positions require knowledge of our procedures as it pertains to processes and documentation. On the job training and oversight is provided by NEACO management. Essential Responsibilities Commitment to company values and ethics Test and repair aircraft components in accordance with company provided data (manuals, drawings, procedures, etc.) and company provided training. Maintain a clean, clutter-free work area. Correctly, concisely, and legibly fill out all company forms and reports as required by management (both written and online). Work with co-workers to achieve goals and objectives set by management. Work with management to develop new processes and procedures as necessary. Assist in basic shop upkeep and maintenance including routine cleaning of the technician's work area and periodic shop maintenance assignments. Communicate clearly and effectively with internal and external representatives, including management, customer reps, FAA inspectors, airline inspectors and similar (training provided). Experience and Skills The ability to pass a pre-employment and random drug and alcohol screenings as well as a basic background check. 2+ of similar or related work experience; similar experience in aviation, automotive, marine, electronics, or low-voltage electric repair will be considered. Technician candidate must own his or her own set of basic hand tools. Applicant must have at the least a moderate level of experience and proficiency with general electrical soldering and/or circuit board level soldering. The ability to follow instructions and work to a written procedure concisely and accurately. Must be fluent in speaking, reading, and writing English. Applicants must be able to read and thoroughly understand technical drawings, blueprints, manuals, and instructions. A pre-employment technical skills and comprehension test may be required. Interested individuals must be detail-oriented, self-motivated, and highly organized. Experience using a computer. Punctual and reliable. Valid driver's license. Electrical or Mechanical aptitude and hands-on experience. Machinist experience a plus. Physical Requirements The ability to lift up to 50 lbs. The ability to walk up stairs Manual dexterity (must be able to hold certain components with one hand while moving tools around with the other) Constant hand manipulation of small to medium components Sitting or standing for long periods of time Frequent use of hand tools and other repair equipment Use of chemicals for cleaning, lubricating and painting Education High school diploma or GED is required. Associates degree or higher in a related technical field preferred. Trade schooling or related industry experience required. A&P license/certificate is not required (but it is a plus). This position is considered safety sensitive and will be part of FAA DOT Drug Abatement Program so must be able to pass pre-employment and random drug or alcohol testing. Compensation Hourly position commensurate with experience level and skill level and/or certifications. ($24 - $32) We offer medical, dental, vision, life and other insurance options; 401k with 100% match on first 4%; full time workers get paid holidays, vacation & sick/personal leave accrued on hire date. About Us Northeast Aero Compressor is an equal opportunity employer. For more information go to our website at **************

This Is How We Fly At JSX, we're not just a lifestyle carrier - we're a lifestyle employer. Here, entrepreneurship meets determination, and excellence is our standard. We believe that the journey is just as important as the destination, and every day, we strive to create a Joyful, Simple eXperience for our Customers. Join us, and find your runway to growth, innovation, and success. About the Role: As an Aircraft Maintenance Technician, you play a critical role in ensuring the safety, reliability, and performance of our aircraft fleet. You will be responsible for performing both scheduled and unscheduled maintenance in full compliance with FAA regulations, company policies, and manufacturer maintenance manuals. Your work directly supports our mission to provide safe and efficient air travel while maintaining the highest standards of operational excellence. A Day in the Life: Your day will be dynamic and hands-on, centered around ensuring every aircraft is flight-ready and impeccably maintained. Typical responsibilities include: Pre-Flight Inspections: Start your day by “waking up” the aircraft, conducting thorough pre-flight checks to ensure all systems are fully operational before takeoff. Post-Flight Inspections: After each flight, you will perform detailed post-flight evaluations to identify and address any issues or wear that may have occurred. Maintenance Logging: All maintenance activities-whether scheduled or unscheduled-are documented in Traxxall and properly signed off in aircraft logbooks, ensuring full traceability and compliance. Hangar Maintenance: You'll help maintain a clean, organized, and safe working environment in the hangar. Why You'll Love This Role: Be Part of a Team That Values You: Join a tight-knit, supportive team of professionals who are passionate about aviation and committed to safety and excellence. No Two Days Are the Same: From troubleshooting to routine checks, you'll enjoy a fast-paced, engaging work environment. Make a Tangible Impact: Your attention to detail and technical expertise directly contribute to flight safety and an exceptional Customer experience. Opportunities to Grow: We're invested in your long-term success, offering ongoing training, certifications, and a clear path to advance your career. What Makes a Successful Aircraft Maintenance Technician? We're looking for someone who is: Critical Thinker: You can quickly assess situations and make sound, safety-first decisions. Detail-Oriented: You understand that precision matters - especially when it comes to aircraft performance. Collaborative: You work well across departments, valuing communication and teamwork to achieve common goals. Organized: You can effectively manage tasks and prioritize under tight timelines without missing a step. Proactive: You don't just react - you anticipate issues and take the initiative to address them before they escalate. Entrepreneurial Spirit: You bring energy, ownership, and creativity to your role, always looking for ways to improve processes and elevate the Customer experience. Required Experience: High school diploma/GED Ability to occasionally lift 75+ pounds Ability to perform intermittent physical activity including bending, reaching, and prolonged periods of standing. Available to work flexible shifts including early mornings, late nights, holidays, and weekends. Participation in initial and random drug and alcohol screenings in accordance with the DOT and FAA guidelines. Ability to operate forklift, boom lift, scissor lift, etc. Ability to taxi and engine run an airplane. Must procure own tool set. Preferred Experience: Prior aircraft maintenance experience. Experience working with AMM, IPC, FIM, etc. for troubleshooting references. Skills, Licenses, & Certifications: Current and valid Driver's license required. Current and valid Airframe and Powerplant Certificate required. Ability to operate in time critical situation with strong attention to detail. Pay & Perks: Compensation is $41-$53/hour. This was established after performing market research and is aligned with our approach to compensation. Health Benefits: New Crewmember's become eligible for coverage on the 1st of the month following the start date, with medical plans beginning at just $110/month. 100% employer paid dental & vision, plus up to $2,100 annually for HSA contribution. Short-term and long-term disability coverage at no cost. Travel Benefits: Enjoy free non-revenue standby travel on JSX, plus deeply discounted standby travel other major domestic & international airlines for you and your qualifying immediate family. 401(k) match: 50% of your first 8% Generous PTO: Take time to recharge with our flexible PTO plan. Additional Information: May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (emergencies, changes in workload, rush jobs, technical developments, etc). JSX seeks to provide equality of opportunity in all aspects of employment, as well as to ensure that all personnel activities, such as the recruitment, selection, training, compensation, benefits, discipline, promotion, transfer, layoff and termination processes remain free of illegal discrimination and harassment based upon race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, disability status, or any other characteristic protected by law. Ready to soar with us? Join JSX, where every day is a chance to be part of something eXtraordinary!

Job Description This Is How We Fly At JSX, we're not just a lifestyle carrier - we're a lifestyle employer. Here, entrepreneurship meets determination, and excellence is our standard. We believe that the journey is just as important as the destination, and every day, we strive to create a Joyful, Simple eXperience for our Customers. Join us, and find your runway to growth, innovation, and success. About the Role: As an Aircraft Maintenance Technician, you play a critical role in ensuring the safety, reliability, and performance of our aircraft fleet. You will be responsible for performing both scheduled and unscheduled maintenance in full compliance with FAA regulations, company policies, and manufacturer maintenance manuals. Your work directly supports our mission to provide safe and efficient air travel while maintaining the highest standards of operational excellence. A Day in the Life: Your day will be dynamic and hands-on, centered around ensuring every aircraft is flight-ready and impeccably maintained. Typical responsibilities include: Pre-Flight Inspections: Start your day by “waking up” the aircraft, conducting thorough pre-flight checks to ensure all systems are fully operational after takeoff. Post-Flight Inspections: After each flight, you will perform detailed post-flight evaluations to identify and address any issues or wear that may have occurred. Maintenance Logging: All maintenance activities-whether scheduled or unscheduled-are documented in Traxxall and properly signed off in aircraft logbooks, ensuring full traceability and compliance. Hangar Maintenance: You'll help maintain a clean, organized, and safe working environment in the hangar. Why You'll Love This Role: Be Part of a Team That Values You: Join a tight-knit, supportive team of professionals who are passionate about aviation and committed to safety and excellence. No Two Days Are the Same: From troubleshooting to routine checks, you'll enjoy a fast-paced, engaging work environment. Make a Tangible Impact: Your attention to detail and technical expertise directly contribute to flight safety and an exceptional Customer experience. Opportunities to Grow: We're invested in your long-term success, offering ongoing training, certifications, and a clear path to advance your career. What Makes a Successful Aircraft Maintenance Technician? We're looking for someone who is: Critical Thinker: You can quickly assess situations and make sound, safety-first decisions. Detail-Oriented: You understand that precision matters - especially when it comes to aircraft performance. Collaborative: You work well across departments, valuing communication and teamwork to achieve common goals. Organized: You can effectively manage tasks and prioritize under tight timelines without missing a step. Proactive: You don't just react - you anticipate issues and take the initiative to address them after they escalate. Entrepreneurial Spirit: You bring energy, ownership, and creativity to your role, always looking for ways to improve processes and elevate the Customer experience. Required Experience: High school diploma/GED Ability to occasionally lift 75+ pounds Ability to perform intermittent physical activity including bending, reaching, and prolonged periods of standing. Available to work flexible shifts including early mornings, late nights, holidays, and weekends. Participation in initial and random drug and alcohol screenings in accordance with the DOT and FAA guidelines. Ability to operate forklift, boom lift, scissor lift, etc. Ability to taxi and engine run an airplane. Must procure own tool set. Preferred Experience: Prior aircraft maintenance experience. Experience working with AMM, IPC, FIM, etc. for troubleshooting references. Skills, Licenses, & Certifications: Current and valid Driver's license required. Current and valid Airframe and Powerplant Certificate required. Ability to operate in time critical situation with strong attention to detail. Pay & Perks: Compensation is $41-$53/hour. This was established after performing market research and is aligned with our approach to compensation. Health Benefits: New Crewmember's become eligible for coverage on the 1st of the month following the start date, with medical plans beginning at just $110/month. 100% employer paid dental & vision, plus up to $2,100 annually for HSA contribution. Short-term and long-term disability coverage at no cost. Travel Benefits: Enjoy free non-revenue standby travel on JSX, plus deeply discounted standby travel other major domestic & international airlines for you and your qualifying immediate family. 401(k) match: 50% of your first 8% Generous PTO: Take time to recharge with our flexible PTO plan. Additional Information: May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (emergencies, changes in workload, rush jobs, technical developments, etc). JSX seeks to provide equality of opportunity in all aspects of employment, as well as to ensure that all personnel activities, such as the recruitment, selection, training, compensation, benefits, discipline, promotion, transfer, layoff and termination processes remain free of illegal discrimination and harassment based upon race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, disability status, or any other characteristic protected by law. Ready to soar with us? Join JSX, where every day is a chance to be part of something eXtraordinary!

PL Developments, also known as PLD, is a leading manufacturer, packager, and distributor of over-the-counter (OTC) pharmaceutical products and consumer healthcare goods The Lead Mechanic oversees daily mechanical operations within blister and carton packaging, managing personnel and ensuring all equipment meets cGMP, SOP, OSHA, FDA, and safety standards. This role is responsible for equipment set-ups, repairs, preventive maintenance, troubleshooting, and continuous improvement of production efficiency. Additional responsibilities include training mechanical staff, supporting installation of new vision systems, and performing technical fabrication and repairs. Strong technical expertise, problem-solving skills, and the ability to collaborate across Planning and Quality teams are essential. Work Schedule: Monday-Thursday 7:00am-5:30pm (Overtime on Fridays as needed) JOB QUALIFICATIONS: Bachelor's degree in Mechanical Engineering or related field or 5 years managerial experience in the associated field Knowledge of OSHA, cGMP and FDA guidelines Ability to recognize hazards and take appropriate corrective actions Knowledge of equipment operations and maintenance practices Knowledge of Standard Operating Procedures for equipment operations including safety rules and regulations Expertise in the operation and maintenance of food and/or pharmaceutical equipment Ability to troubleshoot problems with facilities and production equipment. Experience analyzing and troubleshooting problems with equipment, identifying solutions, recommending and implementing methods, procedures and/or techniques for resolution Ability to read and interpret blueprints and schematics Ability to establish and maintain cooperative working relationships Ability to work independently as well as in a team environment POSITION RESPONSIBILITIES: Accountable for the day to day management of blister/carton personnel Responsible for machine related aspects such as packaging projects, equipment maintenance, parts and service Review daily mechanical activities to assure compliance with company cGMP's, and SOP's Oversee daily set-up, repair, and preventive maintenance of packaging equipment in both bottle and blister operation Ensure that each member of the mechanical team is properly trained along with documentation indicating training information Continuous Improvement of Units Per Minute through consistent machine set-ups, proper mechanical maintenance, and personnel training New Packaging Line Design Prepare timelines, line layouts, and review of electrical schematics for new machine installation IQ/OQ review and approval Oversee outside service requirements and contracts negotiations for compressors, plc's, etc Perform installation and set-up of new visions systems as required Knowledge of welding, machine fabrication, and technical repairs Participate in weekly meetings with Planning and Quality PHYISICAL REQUIREMENTS: This position requires regular physical activity, including frequent walking, climbing, bending, kneeling, lifting, stooping, and reaching/working overhead. Candidates must be able to lift, pull, or push up to 75 pounds on a regular basis, safely use ladders up to 30 feet and work at elevated heights and climb ladders with a 300-pound weight limit while carrying a tool bag weighing approximately 20 pounds. The role involves standing and moving for extended periods in a fast-paced production environment and may require working in various temperatures or conditions. Incumbents may be exposed to hazardous materials, gases, electrical components, and equipment. Safety protocols and protective gear are provided. Hourly Range: $40.00-$50.00/hr based on experience. BENEFITS: PLD is a proud employer offering many corporate benefits, including: ⠁ Medical and Dental Benefits ⠁ Vision ⠁ 401K with employer match ⠁ Group Life Insurance ⠁ Flex Spending Accounts ⠁ Paid Time Off and Paid Holidays ⠁ Tuition Assistance ⠁ Corporate Discount Program ⠁ Opportunities to Flourish Within the Company PL Developments is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. #HP1

At Brightcore Energy, we specialize in turn-key solutions that simplify the clean energy journey for large commercial and industrial clients. Whether it's cutting-edge geothermal systems, solar, energy storage, or smart building technologies, we bring expertise, innovation, and a seamless approach to every phase of a project - from planning and design to implementation and ongoing support - thereby streamlining project timelines, reducing costs, and eliminating scope gaps. Summary/Primary Role: This role will have expertise in small engines, gasoline engines, and hydraulic systems to join our team. This role requires a Class A CDL, managerial experience, and the flexibility to work both in the field and at our home shop in Rock Tavern, NY. The ideal candidate will have a strong mechanical background, leadership skills, and a willingness to travel as needed. Principal Duties & Responsibilities: (Management may amend or assign duties and responsibilities to this job at any time) Diagnose, repair, and maintain diesel and gasoline engines, including small engines and hydraulic systems. Perform preventive maintenance and troubleshooting on a variety of equipment, ensuring optimal performance. Operate and maintain service trucks and equipment necessary for field repairs. Supervise and manage a team of mechanics or field technicians when required. Ensure compliance with DOT regulations and maintain accurate service records. Travel to job sites for on-site repairs and field service support. Work collaboratively with team members to improve workflow and efficiency. All other duties and responsibilities as assigned. Qualifications: Active CDL A Class strongly required. Minimum 5 years of hands-on experience in diesel, gasoline, and small engine repair. Strong knowledge of hydraulic systems, electrical diagnostics, and welding/fabrication is a plus. Experience in managing a team or leading a shop/field service crew. Willingness to travel for fieldwork as necessary. Must reside within 40 miles of Rock Tavern, NY. Ability to work independently and in a team environment. Strong problem-solving skills and attention to detail. Supervisory Responsibility: This position does not have supervisory responsibility. Expected Hours of Work: An Employee is expected to work a minimum of forty (40) hours per week. Non-exempt employees are eligible for overtime pay in accordance with applicable wage and hour laws, while exempt employees may be required to work additional hours as necessary to fulfill their job responsibilities. Overtime requirements will be determined based on the operational needs of the organization. The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining an employee's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, years of relevant experience, education, credentials, and internal equity). Brightcore also offers a comprehensive set of benefits to compliment the salary. The hourly hiring range for this position is $48.00-$54.00 and there is eligibility for overtime for all hours worked over 40 hours per week. Travel Requirements: Travel required 75% in the Northeast. Work Environment: Work site setting. Warehouse/Shop setting. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This is a safety sensitive position. Drug & Alcohol-Free Workplace: Brightcore Energy is committed to a safe workplace free of drugs and alcohol. All Brightcore Energy positions require a pre-employment background check that includes prior employment verifications, a criminal history check, and a pre-employment drug screen. In accordance with DOT regulations (49 CFR § 40.25), Brightcore Energy is required to obtain prior drug and alcohol testing records for applicants/employees intending to perform safety-sensitive duties for covered Department of Transportation positions. If an applicant/employee refuses to provide written consent for Brightcore Energy to obtain these records, the individual will not be permitted to perform safety-sensitive functions. Office/Remote/Field Work: We offer a variety of structured work arrangements, including remote, hybrid, and field-based assignments, aligned with organizational needs and role-specific requirements. Work arrangements are role-dependent, with guidelines established based on position requirements and business needs. This policy is subject to change at Brightcore's discretion. Brightcore Health Benefits Overview: Brightcore offers a full slate of medical, dental, and vision benefits including options to enroll in a Flexible Spending Account (FSA) and a Health Savings Account (HSA). 401k Plan: Brightcore currently offers both traditional and Roth 401k plans with a dollar-for-dollar match of up to 3% of contributions and $0.50 on the next 2% for a total potential match of 4% annually. Other Benefits & Perks: PTO Financial Wellness Benefits Benefit Concierge Program through Health Advocate EAP - Employee Assistance Program Disability, Life, & AD&D Benefits Access to Marketplace for Discounted Goods & Services Brightcore Energy is committed to bringing together individuals from different backgrounds and perspectives. Brightcore Energy is an Equal Opportunity Employer, providing equal employment and advancement opportunities to all individuals. We recruit, hire and promote into all job levels the most qualified applicants without regard to race, color, creed, national origin, religion, sex (including pregnancy), parental status, age, disability, genetic information, citizenship status, veteran status, gender identity or expression, transgender status, sexual orientation, marital, family or partnership status, political affiliation or activities, military service, domestic violence victim status, sexual or reproductive health decisions, caregiver status, traits historically associated with race, including but not limited to hair texture and protective hairstyles or any other status protected under applicable federal, state and local laws. Brightcore Energy is committed to providing equal employment opportunities to all aspects of employment, including job assignment and compensation. We respect the laws enforced by the EEOC and are dedicated to going above and beyond in fostering diversity across our company. This job description provides a general overview of the expectations and basic duties of the job and is not a comprehensive list of all duties and responsibilities. Brightcore Energy will assign additional duties and tasks that it deems necessary to meet the requirements of the position. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

As a Mechanic at Bridor, you'll be at the heart of keeping our production running smoothly. Working closely with the Maintenance Supervisor, you'll troubleshoot, repair, and maintain critical production equipment, ensuring it's always operating at its best. Your work will directly contribute to delivering high-quality baked goods to customers across the country. This is more than just a maintenance role; it's a chance to be part of a team that drives excellence and innovation every day. Shift Available: Day Shift (6 a.m. to 3 p.m.) Sunday - Thursday (subject to change as needed) Flexibility Required: Must be willing and able to rotate to any of the 3 shifts as necessary to cover operations, maintenance functions, or absences. Responsibilities: Troubleshoot & Repair: Quickly assess equipment issues and implement fixes to keep the production line moving. You'll work with a variety of mechanical, electrical, and pneumatic systems Preventative Maintenance: Conduct proactive maintenance to ensure our equipment is always running at peak performance. You'll use computerized maintenance systems to keep track of all maintenance activities Fabrication & Installations: Get hands-on by fabricating parts, structures, and equipment to improve production capabilities. You'll also help install new equipment to ensure we continue growing and innovating Safety First: Maintain the highest standards for safety and food safety regulations, making sure we meet or exceed Good Manufacturing Practices (GMPs) What We're Looking For: Experience: You've worked as a Maintenance Mechanic, ideally in a food processing or bakery manufacturing environment, and are ready to bring your expertise to our team Problem-Solving Skills: You love a challenge and can quickly troubleshoot and repair a wide variety of equipment to ensure maximum uptime Mechanical/Technical Expertise: You have strong mechanical, electrical, and electromechanical aptitude, and can read prints, schematics, and manuals to identify and order parts Team Player: You're a great communicator and thrive in a team-focused environment where collaboration and innovation are key to success Other Requirements: Ability to think on your feet and make quick, effective decisions Organizational skills that keep you ahead of the game, even when things get busy Basic computer proficiency, including Microsoft Office, to track maintenance activities and communicate effectively WHO IS BRIDOR? At Bridor, we've been creating exceptional bakery products since 1984. As part of the global Groupe LeDuff , we're continually expanding and innovating, ensuring that we stay at the forefront of the bakery industry. Our team is passionate, driven, and dedicated to producing the best quality products for our customers. Joining Bridor means you'll be part of a company that values quality, teamwork, and forward-thinking . We're proud of our diverse and inclusive culture, and we're always looking for talented people who are ready to contribute and make an impact. Ready to Join Our Team? If you're ready to bring your skills to a company that values your contributions and offers a supportive, exciting, and rewarding work environment, then we want to hear from you!

* Job Type: Support Staff - Union * Bargaining Unit: TWU - B&G * Regular/Temporary: Regular * Hours Per Week: 40 * Standard Work Schedule: Sunday - Thursday, 7:30 am - 4:00 pm * Building: MS General * Salary Range: $36.99 - $46.24 The salary of the finalist selected for this role will be set based on a variety of factors, including but not limited to departmental budgets, qualifications, experience, education, licenses, specialty, and training. The above hiring range represents the University's good faith and reasonable estimate of the range of possible compensation at the time of posting. Position Summary The HVAC Controls Mechanic performs operations as required by job work order and/or blueprint or diagram in preventive maintenance, operation, and repairs to various types of boilers and refrigeration plant equipment used in building heating, ventilation, air conditioning, and refrigeration systems. Responsibilities * Must be experienced in repair and maintenance of all types of pumps; repairs, replaces bearings, bushings, impellers, shafts, couplings, packing, drive belts, and sheaves without direct supervision. * Repairs or fabricates parts using standard machine shop tools. * Performs preventive maintenance of fans, troubleshoots. * Services all types of pneumatic and Electra pneumatic building systems, computer controls interfaces * Performs other related duties as assigned. Minimum Qualifications * High school diploma or equivalent required. * Four years of trade school required, or equivalent combination of education and experience required. * Must have a minimum of two years of technical training in the HVAC field and two years' experience in maintenance and troubleshooting of all control systems. * A total of six years' experience in the HVAC field is required. Preferred Qualifications * NYC refrigeration license is highly desirable. Equal Opportunity Employer / Disability / Veteran Columbia University is committed to the hiring of qualified local residents.

Power-Flo Technologies is a temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. We are looking for an HVAC Controls Mechanic to work independently in the field to startup, service, and support temperature control systems in coordination with our in-house engineering team. What Will Make You Successful in This Role? Experience and certification with programming either Johnson FX controllers (CCT) (preferred), Honeywell Spyder, and/or Niagara AX/N4 (any brand) Experience with ACAD, or similar CAD software Knowledge of industry-standard communication protocols such as BACnet MSTP, BACnet IP, Niagara, JCI N2, Modbus, Lon, Etc. Niagara N4 certification Ability to read and interpret blueprints, specifications, and program/design to meet sequence of operations of both design/build projects as well as plan/spec projects Additional Necessary Qualifications 3 years of building automation experience required Strong understanding of commercial HVAC systems operations Ability to read mechanical prints and schematics Ability to work independently and in a team setting Basic knowledge regarding use of a PC (Microsoft Word, Excel, Outlook) Competent with the use of electrical test equipment, i.e., Multi meter, shop tools, hand tools, pneumatic tools Mechanical aptitude required The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams Valid and clean NYS Driver's License OSHA 30 and site safety training Physical Requirements Ability to Stand for 8 Hours Ability to lift 50 pounds Ability to work on elevated platforms Ability to climb ladders This position may require standing, stooping, bending, kneeling, crouching and/or reaching Salary Range: $60,000 - $100,000/year Benefits Health Insurance (medical, dental, vision) PTO Program and Paid Holidays 401K EAP ESOP (Employee Stock Ownership Plan) ********************************************************* We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

West Star is the fastest growing maintenance repair organization in the industry and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. The main responsibility of the Service Hub Flex Technician will be to support either the TEB, Teterboro, NJ or HPN, White Plains, NY Service Hubs depending on aircraft demand, this position can be based in either TEB or HPN. What you can expect as an Aircraft Maintenance Technician at West Star: Whether you are replacing or repairing parts, troubleshooting electrical/mechanical/hydraulic and pneumatic systems or performing inspections on some of the most sophisticated civilian aircraft in the world, no day is the same. What is the same, is that each day will bring new experiences and opportunities for growth. You will be ESSENTIAL to many FUNCTIONS including: Performing general mechanical tasks on aircraft and related systems. Removal and installation of panels and components, Troubleshooting and problem solving aircraft system/component issues De-fueling aircraft, Engine removal/installations, Operating ground support equipment, Inspection and evaluation of the aircraft and components Aircraft movement and assistance in performance runs/ taxiing Maintenance and repair of shop facility, equipment and tooling Immediately notify the Lead Mechanic of any problem areas such as parts, materials, workmanship, or airworthiness issues. Provides the Lead Mechanic with a detailed report of work progression and open items to be included in the shift turnover log Proper tagging of Aircraft components, parts, and panels appropriately stored including racks by aircraft. Basic computer skills to be able to navigate electronic training, manuals, and maintenance data bases Willing and able to work rotating shifts including, nights, holidays, weekends and days off. Effectively and clearly communicate (i.e., speak, write, read) in English Any other job-related duties as assigned by supervisor or management. What you'll need to bring with you: Your Education: A High school diploma or equivalent, and Airframe and Powerplant License are required. A valid driver's license approved for airline travel and/or a valid passport is ideal Your Initiative: We're looking for team players who are self-motivated and able to perform in a fast paced environment where working under specific deadlines and time constraints will be common. Your Sense of Responsibility: Attend work every day as scheduled to include overtime and weekend assignments. Notify supervisor in advance of shift starting if unable to work. Must have reliable transportation to get to work each and every day. Perform all work in accordance with Federal Aviation Administration guidelines. Follow all company and safety rules during performance of duties. Maintain customer oriented work habits.

Job Description Job Posting - Seasonal De-Icing Technician - LGA - Queens, NY Job Type: Seasonal - Full-time and Part-time Shifts (depending on weather) Application Deadline: December 31, 2025 Join the Front Line of Winter Safety in Aviation Aeromag is a leader in aircraft de-icing operations across North America and Europe. As a Seasonal De-Icing Technician, you'll play a crucial role in ensuring the safety and on-time departure of aircraft during winter conditions. Whether you're looking to gain experience in the aviation industry, return for another season, or earn extra income during the winter months, this is a flexible and impactful opportunity. Our technicians choose their shifts based on availability, making this role ideal for students, retirees, or anyone with a variable schedule. Key Responsibilities Safely operate de-icing trucks and equipment near aircraft under winter conditions Apply aircraft anti-icing/de-icing fluids in accordance with procedures and safety protocols Communicate with ground crew, flight crew, and dispatchers Follow airport regulations, security procedures, and safety guidelines Complete required logs and reports after each operation What You Bring Must be available for shift work, including nights, weekends, and holidays Comfortable working outdoors in extreme weather conditions Valid driver's license required (airside license preferred or must be obtained upon hiring) Able to pass security clearance for airport operations (RAIC, SIDA, or equivalent) Prior experience in aviation, heavy equipment, or seasonal work is an asset Why Join Aeromag Competitive hourly wage ($22.50) Paid training and certification provided Flexible scheduling - choose your shifts based on your availability Ideal for those seeking extra income during the winter season Opportunities to return seasonally or grow into year-round roles Be part of a team that makes a direct impact on air travel safety Apply Today Only selected candidates will be contacted for interviews. Aeromag is an equal opportunity employer and values diversity in its workforce.

Please call/text Jen Parker at ************** to discuss opportunity in further detail and/or send resume to ********************** HSGI, Inc. has IMMEDIATE Airframe & Powerplant Mechanic positions available! The Aircraft Maintenance Technician reports directly to the Crew Chief for task assignments and is responsible for the timely and efficient completion of all assigned duties. The A&P Mechanic carries out tasks in accordance with work scope requirements, adhering to established quality standards and utilizing the appropriate technical documentation. Responsibilities include, but are not limited to, maintenance and inspection, servicing and lubrication, troubleshooting, repairs and modifications, as well as fueling and de-fueling operations. Experience on Dassault Falcon Jet, Gulfstream, Citation, Bombardier, Lear Jet, Challenger, Global Express, Hawker Beechcraft, Embraer, etc., would be a plus and an immediate hire! For immediate consideration, call/text Jen Parker at ************** and email your resume to ********************** Very Urgent Job Opportunity! Serious and experienced A&P Mechanic with Airframe & Powerplant License. Lear Jet, Dassault Falcon Jet, Gulfstream, Citation, Bombardier, Hawker Beechcraft, Embraer, etc. Aircraft Mechanics! DUTIES & RESPONSIBILITIES: Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures Communicate as required to receive and understand work assignments Perform complex aircraft inspections, repairs, and modifications with minimal supervision Coordinate with other departments as needed to ensure compliance with internal and FAA inspection and documentation requirements Properly complete work order sign-offs and other paperwork in a timely and accurate manner. Ensure that all work accomplished meets quality standards and specifications MINIMUM REQUIRED QUALIFICATIONS: High school diploma or equivalent. FAA Mechanics Certificate with Airframe and Powerplant Rating. Read and interpret aircraft diagrams, charts and schematics. Lift up to 50 lbs. Must not be allergic to fuels, oils, hydraulic fluids and cleaning solvents. Work and bend in confined work space. Must have manual dexterity required for technician. Must be able to repeatedly enter and exit aircraft using stationary steps/stairs. ADDITIONAL DESIRED QUALIFICATIONS: Knowledgeable and experienced using computers and aircraft software. Successful completion of at least one (1) Maintenance School is a plus. Engine Run and Taxi qualified on business jet aircraft, preferably on Dassault Falcon Jet, Gulfstream, Citation, Bombardier, Lear Jet, Challenger, Global Express, Hawker Beechcraft, Embraer, etc. aircraft is a plus. ABOUT US: We care about you and your career, we care about you and the ones you care for, our success is your success, you are not just a contractor you're a valued team member and part of our family we look forward to working with you soon! HSGI, Inc. is a Full Service Aerospace, Engineering & IT Staffing & Consulting Firm supplying qualified technical and professional employees to the most reputable companies in the Aerospace/Aircraft industry-across the United States and abroad. Give Jen Parker a call/text at ************** and email your resume to **********************

Flexjet, an award winning organization, is currently looking for an experienced, certified Aircraft Maintenance Technician (AMT) to join our team! This position will be responsible for performing routine inspections, troubleshooting, and repairs including airframe structures, engines and aircraft systems. The Aircraft Maintenance Technician (AMT) will make repairs and conduct tests to keep equipment operating efficiently and safely. Please note, this position will require working nights. This position is located in White Plains, New York. Starting Pay Rate $ 85,120.00 + (based on experience). DUTIES & RESPONSIBILITIES Perform all airframe and powerplant repairs and modifications required to meet company and FAA requirements Remove and disassemble defective parts; assemble and install of replacement parts and testing aircraft system Operate all power tools and equipment necessary to accomplish job assignments Complete all required maintenance records in an accurate manner to include accurately reporting of times required to accomplish the tasks assigned Must support all company policies and safety programs to include OSHA and EPA regulations Interpret technical manuals, drawings and blueprints Present a clean and neat work area Demonstrate professionalism and deliver satisfaction to the internal/external customer Perform other related duties & responsibilities as assigned EDUCATION & EXPERIENCE FAA Airframe & Powerplant License is required 2-4 years directly related aviation experience (corporate aircraft experience preferred) At least 2 years of fleet type experience desired Good working knowledge of Federal Aviation Regulations (FAR) Part 145, 135, 121 Sheet metal experience is preferred but not required REQUIRED SKILLS Successful candidate will be highly motivated and work effectively under pressure and time constraints Must have the ability to multi-task within a team environment Strong working knowledge of Windows and MS Office programs Possess proven inspection competencies Must be detail-oriented and well organized; demonstrate excellent communication skills, and a positive attitude Specialized aircraft tooling will be furnished by the company WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme weather conditions. The noise level in the work environment and job sites can be loud. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 10 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers. If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Why Bombardier? Our employees are expected to bring their authentic selves to work because we firmly believe our people are at the heart of our success. We are mindful of our employees' well-being and are consistently working to improve upon our benefits package: • Competitive hourly rates & sign-on bonuses • Annual bonus opportunities • Paid overtime and shift premiums • Relocation assistance • Vacation, paid holidays & additional personal days off • Comprehensive benefits package (including 401K with Company contribution and match, medical, dental, vision & life insurance or cash in lieu of benefits) • Possibility of tuition reimbursement • Training & skills development opportunities What are your contributions to the team? A&P Technicians are playing an essential role in our business. You will troubleshoot, repair, inspect and perform maintenance on customer aircraft often working directly with clients to help them find solutions. How to thrive in this role? • You have a valid and current FAA Airframe & Powerplant (A&P) license. • You have a minimum of 3 years' corporate aircraft experience. • You have the ability to interpret and work with mechanical engineering drawings. • You have the ability to effectively communicate in English both written and verbal form on individual and / or aircraft status. • You own a basic set of hand tools with the ability to demonstrate inventory & control of tools. • You must obtain appropriate Ground Support Equipment Qualifications, as required. • You have the ability to work unscheduled overtime including nonscheduled workdays and holidays. • You have basic PC skills. • You have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable). This position may be eligible for up to a $5,000.00 sign-on bonus! (Terms and Conditions Apply)

Why join us? Bombardier is a global leader in aviation, focused on designing, manufacturing and servicing the world's most exceptional business jets and specialized mission platforms. Bombardier has been successful in setting the highest standards because we are a people-centric business that fosters passion, diversity and authenticity. Prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms. Bombardier's Benefits Program With our employees' well-being top of mind, we offer a comprehensive and competitive Benefits Program, which includes the following: * Insurance plans * Dental, medical, life insurance, disability, and more * Competitive base salary * Retirement savings plan * Employee Assistance Program What are your contributions to the team? * Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hangar positions) * Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner * Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft * Perform and document work completed per appropriate manuals and regulations as required * Inspect incoming parts and documentation to meet regulatory requirements * Assist in other maintenance disciplines - Avionics, Structures, Composites etc. * Operate ground support equipment as required * Assist with mechanical / electrical removals and installations * Provide time estimates * Perform other duties as assigned How to thrive in this role? * You have a minimum of 8 years of aircraft maintenance work experience, or substantiated equivalent experience * You have a minimum of 5 years of experience on corporate jet aircraft * You have a minimum of 3 years of Bombardier aircraft model experience * You have experience with aircraft return to service and inspection procedure * You have the ability to become a Delegated Inspector * You have the ability to train other employees * You have the ability to become Engine Run & Taxi qualified on Bombardier Aircraft * You have the ability to become APU Run qualified on Bombardier Aircraft This position may be eligible for up to a 5K sign-on bonus! (terms and conditions apply) Take Your Career to New Heights! Join us for our 2-Day Virtual Hiring Event and connect with our team from anywhere. Dates: Thursday, February 5 & Friday, February 6, 2026 Time: 8:00 AM - 5:00 PM EST Location: Online - Microsoft Teams (Virtual Interviews) This is a great opportunity to explore open roles, interview with hiring managers, and take the next step in your career, all from the comfort of your home. Register here: 2 DAY Windsor Locks, CT Virtual Hiring Event February 5th & 6th Now that you can see yourself in this role, apply and join the Bombardier family! Bombardier is committed to being an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by applicable federal, state or local law. Primary Location Hartford Service Center Employee Status Regular Requisition 4384 Airframe and Powerplant Technician, Unscheduled Maintenance (UMT)

Working at Breeze Airways is an exciting endeavor and a serious commitment to bring “The World's Nicest Airline” to life. We work cross-functionally with truly awesome Team Members to deliver on our mission: “To make the world of travel simple, affordable, and convenient. Improving our guests travel experience using technology, ingenuity and kindness.” ***$10,000 Cash Bonus will be awarded after a 12 month commitment to Breeze*** $5,000 after six months $5,000 after 12 months **Our BDL AMTs also receive a stipend of $800 a month** Breeze is hiring- join us! Breeze Airways is the newest, nicest, fastest growing airline with maintenance bases in Windsor Locks, CT (BDL), Charleston, SC (CHS), New Orleans, LA (MSY), Norfolk, VA (ORF), Provo, UT (PVU), Tampa, FL(TPA), Providence, RI (PVD), Orlando, FL (MCO), Fort Myers, FL (RSW) and Raleigh-Durham, NC (RDU)! Breeze is looking for great and experienced talent. Your entry pay will be based on your experience and our established criteria. Year Hourly Pay 1 $30.50 2 $31.00 3 $31.50 4 $34.50 5 $36.00 6 $37.00 *$2.00 shift differential added when working from 9:00PM - 7:30AM The Aircraft Maintenance Technician (AMT) is responsible for performing maintenance, preventative maintenance, and alterations of Breeze aircraft, including troubleshooting, performing run-up and taxi procedures, and signing mechanical flight releases. The Aircraft Maintenance Technician reports to a Line Maintenance Supervisor and carries out instructions as assigned in accordance with FAA regulations and Breeze policy and procedures. As certified AMTs, you have an important role to ensure the safety of our fellow Breeze Team members and Guests as well as the airworthiness of our fleet. Here's what you'll do Perform all assigned maintenance duties in accordance with the Breeze General Maintenance Manual (GMM) Responsible and accountable for all work performed Complete all appropriate Breeze forms on all work assigned and performed Properly handle all parts, units, assemblies, and aircraft while in the repair process Ensure that all documentation is kept current as to open discrepancies and completed corrective actions Complete all associated and required documentation for all maintenance work performed or inspections conducted accurately and correctly Submit personal OJT Task Cards on time and accurately Maintain the work area in a safe, clean, and operative condition and ensure all tools are accounted for at completion of all assigned tasks Properly care for and use tooling and equipment used for aircraft maintenance Notify the Maintenance Supervisor and all other appropriate Team Members of any condition that would compromise the airworthiness of Breeze aircraft Maintain a valid Airframe & Powerplant (A&P) Certificate, or Repairman Certificate, and keep the certificate available for inspection by the FAA, NTSB, or Breeze Supervisor/Manager Perform other duties and tasks as assigned by Maintenance Leadership, MOC, and/or DOM Achieve performance measures and adhere to established standards in conjunction with Breeze Aviation Group Values of Safety, Kindness, Integrity, Ingenuity and Excellence Here's what you need to be successful Minimum Qualifications Must hold a current, valid FAA Airframe and Powerplant License (A&P) with no history of infractions and recent experience on commercial aircraft types Ability to read and interpret aircraft maintenance manuals and specifications Must have a valid driver's license Must be at least 18 years of age High school diploma or equivalent educational achievement Must have a valid passport with no travel restrictions Must have authorization to work in the US as defined by the Immigration Reform Act of 1986 Must have the ability to travel unrestricted to and from the United States Must be flexible and willing to work all shifts to support a 24/7 operation. Must be willing to travel 20% of the time Must be willing to work with other departments within the company as needed Must pass a DOT pre-employment drug test Must pass a TSA required fingerprint-based criminal history records check and a Breeze background check Preferred Qualifications Understanding and working knowledge of FAA regulations including FAR part 121 operations Experience maintaining Embraer E-Jet and/or Airbus A220 family aircraft Familiar with an airline Maintenance Information System (MIS) such as TRAX Degree in Aerospace, Aviation Maintenance or Business Degree preferred Skills/Talents Skills in Microsoft Office Suite (Word, Excel, Outlook) Must be fluent in English Exemplifies Breeze's safety culture, values, and mission Excellent oral and written communication skills Excellent problem-solving skills Ability to work with individuals and teams at all levels in the organization Perks of the Job Health, Vision and Dental Health Savings Account with Breeze Employee Match 401K with Breeze Employee Match PTO Travel on Breeze and other Airlines too! Breeze Airways provides equal employment opportunities to all Team Members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Breeze Airways will never request your Social Security Number, Driver's License or Date of Birth on our job postings. Job Postings requesting any or all of this information should be regarded as a scam. To ensure you are applying to an actual Breeze Airways posting, please apply online at ***************** then click “Careers” at the bottom of the page.

Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description Job Type: Contract-to-Hire Per Diem: $870 USD per week, applicable to employees residing more than 150 miles from the Service Center. A&P Mechanics play a key role in maintaining the safety and efficiency of customer aircraft. You'll troubleshoot, repair, inspect, and perform maintenance tasks while working closely with clients to find solutions. Troubleshoot, repair, install, inspect, and maintain aircraft. Document work per manuals and regulatory requirements. Follow safety and Environmental Health & Safety policies. Participate in 5S activities to maintain a clean workspace. Operate ground support equipment as required. Perform mechanical/electrical component removals and installations. Provide off-site maintenance support when needed. Assist with fueling, engine removal/installation, and component repairs Qualifications Valid A&P license by the FAA 3 years of corporate experience (Bombardier and Gulfstream preferred) Own basic hand tools and manage tool inventory. Ability to interpret mechanical engineering drawings. Must obtain required Ground Support Equipment qualifications. Willing to work unscheduled overtime, including weekends and holidays. Able to work outdoors in all weather conditions. Basic PC skills. Ability to obtain a SIDA badge (if applicable). US Citizenship or authorized to work in the U.S. without visa sponsorship Additional Information Here's a heads-up of the upcoming steps: Phone Interview with Recruiter: We'll begin with an introductory call to discuss your background and interest in the role. Interview with the Hiring Manager Offer Letter : We´ll extend you an offer and start the onboarding process. Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions You start your next challenge! Segula offers a comprehensive benefits package to all Full-Time Employees. New Hires are eligible for benefits on the 1st day of employment. Medical ,Dental and Vision coverage Employee life insurance Short & Long-Term Disability Voluntary Term Life, AD&D, & Critical Illness 401(K) with a Segula match