Aircraft mechanic jobs in Milwaukee, WI - 411 jobs

Bus Mechanic: Class A or Class B Skills, Experience, Qualifications, If you have the right match for this opportunity, then make sure to apply today. Full-time Compensation: Mechanic Up to $40 an Hour Coach USA is currently hiring full-time mechanics to work at our Waukesha, WI Location! Coach USA has a new and exciting career opportunity for an experienced diesel mechanic at our Waukesha, WI location. We are looking for an experienced mechanic to repair and inspect company equipment in a cost effective, safe, and timely manner. What We Offer: Competitive wage based upon experience and certifications. Mechanic class A: Up to $40.00 per hour Mechanic class B: $26.00 - $35.00 per hour Full-time. Paid holidays, vacation and PTO. Full benefits package (medical, dental, vision, short term disability, life insurance, 401K). Tool and boot allowance. Uniform provided. Responsibilities: Perform basic, routine, and preventative maintenance bus repairs. Diagnose mechanical, electrical, and other breakdowns or failures. Repair or replace malfunctioning components, parts, and other mechanical or electrical equipment. Removal, installation, disassembly, and reconditioning of components of diesel engines. Interprets diagnostic test results accurately. Writes detailed inspection reports and repair plans. Collaborates with other diesel mechanics in all operational repairs. Demonstrate skills in advanced testing of all vehicle systems. Participate in maintenance training programs required for job and career development. Completes test drives to make sure all repaired vehicles run correctly and safely. Uses power, machine, and hand tools safely in a maintenance environment. Follow all safety rules and regulations in the performance of work assignments. Preferred Qualifications: High School Diploma or GED preferred. Be able to work in all types of weather conditions, including outdoors. Class A mechanic -Minimum 5 years' Commercial experience. Charter bus, commercial truck, and diesel repair Class B mechanic- Minimum 1-year commercial experience. Charter bus, commercial truck, and diesel repair Cummins, and Detroit engines Must pass a pre-employment drug screen, physical and criminal background check. Familiarity with safety management. Possess your own set of tools to perform maintenance tasks. Must have a valid Class B Commercial Driver's License (CDL), or the ability to obtain one. Ability to work weekends and holidays. Basic computer skills. Ability to communicate effectively in English. Experience in the transportation industry. Experience in the Motor Coach Industry. Associate degree in diesel technology preferred. Computer diagnostic skills a plus, but training is provided. Coach USA, would love to discuss your qualifications for this position. To learn more about your next big career change! APPLY NOW! Coach USA is an Equal Employment Opportunity employer. xevrcyc In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class. "lube", "mechanically inclined", "mechanic", "Mechanic apprentice", "auto mechanic", technical", "entry level mechanic"

About the Company Atlantic Packaging Products Ltd. is a company with a rich history, culture, and an indomitable spirit to do good. For the past 75+ years, Atlantic Packaging has worked towards preserving the environment and ensuring not a single tree is cut to manufacture boxes. We are proud to state that we save close to 14 million trees every year and continue to work towards achieving a greener planet! Atlantic Packaging Products Ltd. is privately owned and is headquartered in Scarborough, ON. Atlantic Packaging Products Ltd. has 6 US entities: York Container Pennsylvania, York Container Elgin, Skybox Packaging, Stand Fast Group, Blackhawk Corrugated, and Champion Container Corp; with locations in Illinois, Ohio, and Pennsylvania. About the Role We are seeking a skilled and dedicated Maintenance Technician to join our team. The ideal candidate will have a strong background in industrial maintenance, with expertise in electrical systems, HVAC, and general troubleshooting. This role is essential for ensuring the smooth operation of our facilities and equipment, providing high-quality service to our internal and external customers. Responsibilities Perform routine maintenance and repairs on industrial equipment and machinery to ensure optimal performance. Troubleshoot electrical issues, including wiring, circuits, and control systems. Conduct HVAC maintenance and repairs to maintain comfortable working conditions. Utilize precision measuring instruments to analyze equipment performance and identify areas for improvement. Execute welding tasks as needed for repairs or modifications. Provide excellent customer service by responding promptly to maintenance requests and communicating effectively with team members. Maintain accurate records of maintenance activities and repairs performed. Collaborate with other technicians and departments to ensure a safe and efficient working environment. Qualifications High School Diploma/GED preferred. A minimum of 1-year industrial mechanical experience. A valid, current driver's license preferred. Good verbal and written communication skills with ability to communicate effectively with contractors, service techs (onsite/phone support), and fellow employees. Understands various aspects of an industrial facility including structural, electrical, plumbing systems, etc. The ability to work additional hours and weekends as necessary to meet business plan objectives. Must be willing to attend various training courses to improve plant operations / skill sets. Must have knowledge and ability to use digital tools to complete work tasks. This includes using software applications, managing data, and troubleshooting computer issues. Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook). Demonstration of minimum proficiency with the English language in order to ensure effective new hire training and on-going communications about safety and quality issues. Required Skills Ability to perform mechanical troubleshooting and repairs. Identifies and repairs air leaks, water leaks, glue leaks, oil leaks and steam leaks. Working knowledge of chain drives including sprockets and chain repairs. Able to troubleshoot and repair pumps and pump systems. Able to work on pneumatic and hydraulic systems. Working knowledge of belt and pulley systems including sheaves, aligning and changing belts. Able to work with a variety of mechanical hardware (various sizes/threads/etc.). Some ability to fabricate / repair damaged, bent, and broken parts using various methods (welding, fastening, machining, etc.). Perform mechanical PM as needed. Assembles various racking, equipment, etc. Basic understanding of tolerances / square / parallel. Ability to read schematics and mechanical prints. Working knowledge of conveyor systems including belt lacing, tracking and repairs. Able to set up rigging for roll changes and larger repairs. Assists with basic electrical troubleshooting and repairs. Works overtime as required and weekends as required. Preferred Skills Demonstrated ability to exercise honesty, integrity and respect with all clients and co-workers. Maintain a professional appearance and demeanor. Demonstrate a positive attitude. Communicate effectively with co-workers and clients. Work with accuracy, efficiency, and attention to detail. Maintain good attendance by working when and where directed. Work safely in compliance with all safety policies. Respect the work environment and keep it as neat and clean as possible. Exercise initiative to learn new skills and tasks and to help co-workers when possible. Pay range and compensation package $30.00-$40.00 per hour Equal Opportunity Statement Employees are expected to follow all facility safety guidelines that include adhering to GMP (Good Manufacturing Practices) and Food Safety as outlined during their training. Working Conditions Manufacturing environment working around machinery, moving equipment, and loud noise (hearing protection required). Environment is not climate controlled and there is exposure to a wide range of temperatures (temperature varies depending on work/machine location and ranges from 50 degree F to 100 degree F). Possibility of outside work in all types of weather conditions (including heat, cold, rain, and snow). Benefits 401(k) + matching Dental insurance Vision insurance Health insurance - PPO and HDHP plans available Life insurance Employee Assistance Program Employee Referral Program Tuition Reimbursement 80 hours of Vacation/PTO 9 Paid Holidays ```

Why choose HCSO? We have a history of stability and excellence. We continue to maintain and cultivate the highest level of standards and professionalism. We are unlike any other. Join the HCSO family! Compensation Range $33.75-$51.90 Starting Salary Range 33.75-42.825 Summary Perform highly skilled duties in the inspection, maintenance, and repair of fixed-wing and rotary-wing airframes, powerplants, and components to ensure airworthiness; inspect repairs of grounding malfunctions and certify the airworthiness of the aircraft. Must obtain the Federal Aviation Administration (FAA) Inspection Authorization certificate within one year of hire. Duties & Responsibilities Note: Depending on assigned responsibilities, employees may perform some or all of the duties below. Perform daily and periodic inspections of piston and turbine powered fixed-wing aircraft and piston and turbine powered helicopters to ensure airworthiness in accordance with established regulations, maintenance manuals, and guidelines. Perform highly skilled maintenance and repair of airframes, powerplants, engines, components, flight instrumentation, electrical, mechanical, pneumatic, and hydraulic systems, and other related equipment to correct discrepancies and malfunctions. Inspect repairs of unsafe flight discrepancies and malfunctions and certify the airworthiness of the aircraft in accordance with the manufacturer specifications and FAA regulations. Remove, replace, install, rig, calibrate, and test components to ensure proper operation in accordance with manufacturer specifications and FAA regulations. Operate and maintain a wide variety of equipment used to repair and maintain aircraft. Perform major and minor repair, overhaul, and alteration of aircraft airframe, powerplant, propeller, and equipment in accordance with the manufacturer maintenance manuals and FAA regulations and return the aircraft to service in a safe and reliable condition. Test repaired systems for proper operation. Input relative data into a computerized maintenance tracking system. Maintain maintenance logs and records as required by FAA regulations and internal policies. Review maintenance records for trends of problems and reliability of systems. Inventory, requisition, and maintain supplies and equipment required to perform aircraft maintenance and repairs. Schedule preventive maintenance checks to ensure maximum in commission status. Maintain a current listing of FAA regulations, technical manuals, and flight safety bulletins. Perform other related duties as required. Knowledge, Skills & Abilities Extensive knowledge of fixed-wing and rotary-wing aircraft maintenance, repair, and alterations. Extensive knowledge of airframe and powerplant construction and operations. Extensive knowledge of FAA and Occupational Safety and Health Administration (OSHA) regulations and other statutory and administrative guidelines related to work safety and aircraft maintenance standards and procedures. Extensive knowledge of the operation and maintenance of various test and servicing equipment used in the service and maintenance of fixed-wing and rotary-wing aircraft. Skill in using a wide variety of hand tools and test equipment to troubleshoot, maintain, and repair aircraft. Ability to troubleshoot aircraft malfunctions and perform necessary repairs. Ability to follow established procedures. Ability to follow oral and written instructions. Ability to identify trends in malfunctions and take appropriate actions to improve system reliability and safety. Ability to communicate effectively, both orally and in writing. Ability to maintain work-related records and prepare reports. Ability to use a computer and related software. Working Conditions Working on a ramp, within a hanger, or within a climate-controlled maintenance bay of a law enforcement agency facility. Working outdoors in a subtropical climate in potential adverse weather conditions and high noise levels. Traversing rough and/or uneven terrain. Positioning self to repair aircraft above, near, or at ground level. Maintaining cell phone availability after hours and at home to provide assistance/guidance to subordinates. Participating in an on-call status that requires a 24 hour a day availability to respond to callouts. Working nonstandard duty hours and rotating shifts that include nights, weekends, and holidays. Engaging in frequent heavy physical exertion of aircraft repair material and equipment (e.g., lifting, carrying, pushing and/or pulling of objects and materials of heavy weight up to 100 pounds). Minimum Education & Experience A high school diploma or possession of a GED certificate. Possession of a valid FAA Airframe and Powerplant Mechanic certificate. Four years of experience in turbine engine helicopter maintenance and repair of which two years must have been with Airbus models. Two years of experience in single and/or twin-engine fixed-wing aircraft maintenance. OR An associate degree or higher from an accredited institution of higher education. Possession of a valid FAA Airframe and Powerplant Mechanic certificate. Three years of experience in turbine engine helicopter maintenance and repair of which two years must have been with Airbus models. Two years of experience in single and/or twin engine fixed-wing aircraft maintenance. OR Two years of experience as a Hillsborough County Sheriff's Office Aircraft/Powerplant Mechanic. Additionally, the following is required: Meet requirements of Title 14 Code of Federal Regulations, Federal Aviation Regulation Part 65.91 through Part 65.95 for an Inspection Authorization. Additional Job Requirements Attendance at the specified Sheriff's Office work location is required. Depending on assignment, employees may be required to possess a valid Florida Driver License at time of employment. Driving history will be thoroughly reviewed and may be grounds for disqualification. No visible tattoos on face, head, and neck. Tattoos determined to take away from the professional appearance of the Sheriff's Office must be covered with an appropriate white, black, or neutral covering. No illegal drug sale within lifetime. No illegal drug use within the past 36 months. No marijuana use within the last 12 months. No felony convictions within lifetime. No misdemeanor convictions involving perjury, false statement, or domestic violence within lifetime. No dishonorable discharge from any branch of the United States Armed Forces, the United States Coast Guard, National Guard, or Reserve Forces. Successful completion of a background investigation including criminal, reference, employment, and neighborhood checks; polygraph; medical evaluation; and drug screening. The duties and responsibilities on this job description represent the essential functions that an employee must be able to satisfactorily perform with or without reasonable accommodations. Reasonable accommodations shall be made upon request to enable employees with disabilities to perform the essential functions of their job, absent undue agency hardship. The Sheriff's Office retains the right to change or assign other duties to this job as necessary. Preferred Qualifications Completion of a 14 CFR Part 147 Training Program or military equivalent. Completion of Airbus H125 maintenance training. Completion of Safran Arriel 2D maintenance training. Completion of Pilatus PC-12 maintenance training. Completion of Pratt and Whitney PT-6 maintenance training. The Hillsborough County Sheriff's Office is an Equal Opportunity Employer, we believe that diversity and inclusion among our applicants and employees is critical to our success as a community partner. We seek to offer employment opportunities without regard to race, color, religion, sex, pregnancy, national origin, age, physical/mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, and military/veteran status.

Job Description Our client has been synonymous with dependability and quality in the air freight industry since 1986. As the company has grown, so has the number of industries it serves. Today, the company continues to provide the most excellent customer care-driven service to the air freight industry and many others. By carrying over the core belief structure forged in the air freight business of providing the customer what they want on time and at a competitive rate, our client can provide superior air freight services to our growing list of satisfied customers. They are currently recruiting for an A&P Mechanic job in Milwaukee, WI. What Is In It For You Position Type: Permanent - Full-time Benefits: Health, Dental, Vision, Life, STD/LTD, Vacation Pay, Sick Pay, Holiday Pay, 401(k) A Day In The Life of an A&P Mechanic The position you are applying for will be under general supervision. You are responsible for the maintenance, modification, and servicing of aircraft and aircraft components following the manufacturer's specification and FARS. Essential Duties of The A&P Mechanic Perform routine scheduled maintenance and aircraft inspection by ACC's and current manufacturers' specifications. Read and interpret aircraft maintenance manuals and specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components. Modifies aircraft systems or components following drawings, engineering orders, and technical publications. Assemble and install electrical, mechanical, hydraulic, and structural components and accessories using hand and power tools. Provide emergency/unscheduled repairs to minimize aircraft downtime. Requires ability to travel. Review maintenance records and flight logs to schedule prescribed maintenance checks and overhauls. Process all necessary documentation and paperwork for processes completed. Follow all clean-up and housekeeping procedures. Comply with all quality, safety, and sanitation regulations. JOB SPECIFICATIONS Minimum Education: High School Diploma or equivalent Preferred Education: One to two years of technical college/training or equivalent Certifications/Licenses: FAA Airframe and Powerplant Minimum Experience: Up to three to five years or more experience Preferred Experience: Up to six years or more experience Skills: Interpret drawings, specifications, and schematics of aircraft parts/components. Problem-solving and independent decision-making skills Good communication skills Exercise good judgment in working with people in a team environment as well as in aircraft maintenance and safety. Machine Skills: Operate hand and power tools Calculator, PC, telephone, and fax machine Environmental Conditions: Exposure to weather. Work may be performed of doors Physical Demands: Ability to climb ladders, sit-stand, crouch bend for extended periods Physical Strength: Vision Requirements: Accommodation: The ability to adjust vision to bring objects into focus Communication: Communicate effectively with others in the work environment and external customers Representation: Represent the company in a professional and positive manner Contacts: Exchange information with employees and external customers If you are interested in the A&P Mechanic job in Milwaukee, WI, apply today! This vacancy is being advertised by Total Aviation Staffing, LLC. The services advertised by Total Aviation Staffing, LLC are those of an Employment Agency

One of the largest Aircraft Maintenance, Repair and overhaul facilities is hiring A&P mechanics in Rockford, IL. The ideal candidate will have a background line or heavy maintenance checks on commercial or regional aircraft. The right candidate can expect a competitive hourly rate based on their experience and background. There is also potential for relocation for candidates who are not local to the area. Description: Technician I, A&P (Licensed). Responsible for performing intermediate/heavy maintenance tasks without supervision. What you will be responsible for: Perform flight control and engine throttle rigging. Able to use FAA approved data (i.e. IPC, M/M, OHM, SRM) proficiently. Insure work performed adheres to high quality standards. Effectively direct the work of less experienced mechanics. What you will need to be successful in this role: High school diploma or General Education Degree (GED), required. Must have minimum of 5 years' experience in heavy maintenance or related experience and/or training. FAA Airframe & Powerplant (A&P) license, required. Computer keypunch experience. Previous experience in warehousing, handling inventory, and bar code equipment. The rewards of your career at our client go far beyond just your salary: Competitive salary and bonus package Comprehensive benefits package including medical, dental, and vision coverage. 401(k) retirement plan with company match Generous paid time off program Professional development and career advancement opportunities Physical Demands/Work Environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility. The environmental characteristic for this position is an office setting. Candidates should be able to adapt to a traditional business environment. Our client provides accommodation in accordance with applicable laws through all stages of the hiring process. If you require accommodation for any part of the application and/or hiring process, please advise Human Resources. #IND2

Description Role Overview This position is responsible for inspecting, testing, adjusting, repairing, and performing other tasks related to the maintenance and repair of airframe and engine systems and components. Key Responsibilities Performs inspections, servicing, and repairs of a complex nature on various aircraft systems and components Efficiently and effectively troubleshoot and function test referencing manufacturer's technical documents across a variety of airframe, engine and component systems Leads aircraft projects as directed by the Crew Chief and Supervisor Expertly prepares and completes various documents for maintenance/ modification record keeping purposes, as required by FAA Airworthiness Regulations, Elliott Aviation Policies and Processes, FAA Approved Repair Station and Quality Control Manuals, and personal training logs (OJT) Proficiently and consistently locate and uses the appropriate technical data to accomplish any and all tasks Support, maintain, and comply with all Federal, OSHA, State and local regulations, and Elliott Aviation's Environmental, Health, and Safety Policies and Processes Perform related duties, as assigned. Qualifications Ability to attain & retain AOA badge or Airport requirements FAA Inspection Authorization (IA) preferred Must obtain & retain designation as an Elliott Aviation Production Inspector (Blue stamp) High school graduate or equivalency degree required Thorough knowledge and understanding of FARs 43, 65, 91, 135, 145 Aircraft maintenance experience preferred Licenses: Airframe & Powerplant License required Skills and Competencies: Willingness to work on a team with both experienced technicians and mentor junior technicians with a calm demeanor. Willingness to learn by taking guidance from others Ability to communicate well in straightforward situations Organizational skills and attention to detail Ability to maintain a safe and clean work environment Must possess excellent mechanical aptitude and a desire to work Salary & Benefits Wage Scale: The wage scale for this position ranges from $20.00 to $44.00 per hour, based on experience, qualifications and performance. Specific compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Benefits & PerksElliott Aviation takes pride in offering a competitive and comprehensive benefit package to its employees to ensure our team is well cared for. Benefits begin the first day of employment! Sign-on Bonus and relocation bonus potential (qualified jobs only) Health, Dental and Vision Insurance- Significant cost are contributed by Elliott Aviation as part of our commitment to providing a comprehensive benefit program. Plus, you can earn lower rates through our wellness program. RXnGo Pharmacy benefit - Generic prescription coverage at zero cost to the employee Time Off - You will receive 8 paid holidays and paid vacation. Relocation Assistance Provided for most of our positions 401(k) - Company Match Company Sponsored short-time and long-term disability as well as life insurance Employee Assistance Program (EAP) - Confidential consultation and resources services 24/7 Training and Education- On average, Elliott Aviation invests upwards of $3,000 per team member on development of technical skills as well as soft and leadership skills

Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. An Aircraft Mechanic II shall be the equivalent of a Marine Corps Collateral Duty Quality Assurance Representative. Additional required skills for corrosion control personnel: Respirator fit qualified Aircraft Corrosion Control ( N-701-0013) and Aircraft Paint Touch Up and Markings ( N-701-0014) certification. Aircraft tow qualifications or equivalent Experience with aircraft airframes maintenance Mechanic II Functions: The Contractor Aircraft Mechanic II, in addition to the specified corrosion functions and tasks, shall be trained and qualified as Collateral Duty Quality Assurance Representatives (CDQAR) in accordance with the Naval Aviation Maintenance Program 4790 and all local and command requirements. The Contractors qualified as Mechanic IIs shall serve within work centers 120 (Airframes). They shall be responsible for performing maintenance in their respective qualifications as a Mechanic II CDQAR. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Airframe/Structural, Landing Gear, Hydraulic/Pneumatic, Mechanical Flight Control Systems, and related Sub-Systems, and Aircraft Logs and Records Administration Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. Aircraft Mechanic II shall have experience writing with clarity and technical accuracy, and exhibit leadership and ensure adherence to all applicable policies and procedures. Possess a high degree of expertise in the control and coordination of aircraft maintenance. Thorough working knowledge of applicable maintenance/technical manuals and publications. Thorough working knowledge of aircraft maintenance records. Working understanding of the aircraft and aircraft systems Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Aircraft Organizational Level (O-Level) Maintenance Support, General Aircraft Maintenance, Corrosion Prevention, Detection, and Abatement/Repair as required for KC-130J aircraft Maintain assigned aircraft/aeronautical equipment in a manner that meets or exceeds the requirements of the CNAFINST 4790.2 (series) programs IAW the Performance Work Statement (PWS) Scheduled and unscheduled Organizational (O-Level) Maintenance Support Maintenance Control planning and management Aircraft maintenance action documentation via records, forms, and electronic means Support Equipment operations and inspections Aircraft inspections Aircraft Movement Corrosion Control/Aircraft Painting Troubleshooting Preservation and de-preservation General aircraft maintenance Technical Directive compliance and modifications Initiate and Complete Maintenance Action Forms via Optimized Organizational Maintenance Activity (OOMA) or hard copy. Perform duties as Collateral Duty Quality Assurance Representative (CDQAR) for Airframes, Power Plants, and Avionics Systems. Vibration Analysis Operator / Interpreter Tire and Wheel Hydraulic Contamination APU operations Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Other duties as assigned Preferred Qualifications: 10 years or more of Organizational level maintenance 5 years or more maintenance experience on KC-130J aircraft NALCOMIS OOMA Familiarization/Naval Aviation Maintenance Control Management Course (Course D/E-555-0053 OR A COMBINATION OF NALCOMIS OOMA Familiarization Course (Course D/E-555-0054) and Naval Aviation Maintenance Control Course (Course D/E-555-0040) Previously Safe For Flight certified Qualified as Vibration Analysis Operator/Interpreter Tire and Wheel certified Hydraulic Contamination APU Operator Aircraft Tow qualifications as wing walker, Tow Supervisor, and driver Basic Qualifications: Aircraft Mechanic II shall have a minimum of three years aircraft maintenance experience in airframes Previously Collateral Duty Quality Assurance Representative (CDQAR) for Airframes Systems Aircraft Corrosion Control ( N-701-0013) and Aircraft Paint Touch Up and Markings ( N-701-0014) certification Must be eligible for Common Access Card (CAC) Must be deployable to locations Outside Continental U.S. (OCONUS) Employment is contingent on a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; (d) your ability to get a required clearance by your effective start date, if needed, and (e) KAI commencing performance on this contract.

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.

Job Description Plant Reliability Mechanic - Industrial Systems A Day in the Life Your shift kicks off at 2:30pm. You walk the line, complete visual inspections, check fluid levels, and lubricate key points. A sensor reads off-no problem. You calibrate the gauge, tighten a coupling, and clean the assembly. A runtime inspection flags an anomaly, so you launch a diagnostic test, evaluate performance data, and pinpoint the issue using your tools and experience. Before the night ends, you document work performed, record parts used, and note a recommendation for a future adjustment. On another week, you're on third shift (10:30pm - 6:30am), rotating weekends as scheduled. You'll train on first shift at the outset so you're set up for success. Between calls, you verify shop tools are in good condition, update inventory, place an order, and check incoming parts against receipts. A project ticket comes in-assist with the relocation of a machine center. You reference schematics, blueprints, manuals, and Process & Instrumentation Diagrams (P&IDs) to get it done safely and efficiently. About Greif Greif operates in 40 countries and leads the way in performance packaging-delivering trusted, innovative, and tailored solutions across some of the fastest-growing industries. Learn about our Customized Polymer, Sustainable Fiber, Durable Metal, and Integrated Solutions at ************** Follow Greif on Instagram and LinkedIn. Vision: Be the best customer service company in the world. Purpose: Create packaging solutions for life's essentials. How You'll Make an Impact Carry out preventive maintenance tasks per PM procedures to maximize uptime. Perform inspections, adjust/align components, change out parts, and calibrate sensors and gauges. Run diagnostics to assess condition, performance, and functionality of equipment. Troubleshoot using tests, symptom evaluation, and diagnostic tools to identify root causes. Select required materials, replacement parts, and tools to complete minor to moderate repairs. Accurately document work: parts consumed, steps taken, and recommendations for future repairs or adjustments. Keep shop tools and equipment in peak condition through routine checks and maintenance. Manage stock: inventory counts, ordering, receiving, and verification against receipts; request replenishment of common items. Support installations, modifications, and relocations of machinery and equipment. Follow technical documentation-sketches, diagrams, manuals, blueprints, schematics, and P&IDs. Share feedback on recurring issues and collaborate with the team. Complete all paperwork: work orders, parts requests, RCA reports, PM/runtimes, and downtime reports. Take direction from senior mechanics; assist junior mechanics with routine questions. Commit to operational and company safety procedures at all times. Other duties as assigned. Schedule Second Shift: 2:30pm - 10:30pm Third Shift: 10:30pm - 6:30am Rotating weekends and training on first shift are required. Your Toolkit High School diploma (or equivalent) and typically 2-4 years of relevant experience. Hands-on ability with hand, power, and specialty tools; confident using diagnostic equipment. Working knowledge of automated industrial machinery plus electrical, hydraulic, and pneumatic systems. Can read/interpret electrical and mechanical drawings and work orders. Skilled problem-solver who clearly communicates issues and solutions. Comfortable juggling multiple priorities in a fast-paced environment. Experienced in troubleshooting, disassembling, and reassembling manufacturing equipment. Strong written and verbal communication; effective with limited supervision. Proficient with Microsoft Office and related software. You're Proficient In Mechanical Troubleshooting Skills Hydraulics Experience Pneumatics Troubleshooting Maintenance and Repair Skills Experience in a Manufacturing Environment Grow with Greif At Greif, your work has purpose. Colleagues care about your well-being, and you'll have the chance to grow and thrive. Service and leadership are at the heart of our culture, and our global presence lets us do good around the world. #LI-NG1

Minimum 2 years of experience as Aircraft Maintenance Technician/Mechanic. Must have Airframe & Powerplant License. Must share copy of A&P License or A&P License number. Must be available to work on ANY shift. Performing general mechanical tasks on aircraft and related systems. Removal and installation of panels and components, Troubleshooting and problem solving aircraft system/component issues De-fueling aircraft, Engine removal/installations, Operating ground support equipment, Inspection and evaluation of the aircraft and components Aircraft movement and assistance in performance runs/ taxiing Maintenance and repair of shop facility, equipment and tooling Basic computer skills to be able to navigate electronic training, manuals, and maintenance data bases Any other job-related duties as assigned by supervisor or management.

We are Generac, a leading energy technology company committed to powering a smarter world. Over the 60 plus years of Generac's history, we've been dedicated to energy innovation. From creating the home standby generator market category, to our current evolution into an energy technology solutions company, we continue to push new boundaries. The Mechanical Engineer II-Engines plays an important role in advancing the design and performance of internal combustion engines (ICE), through engine development, data-driven analysis, testing, and design of system components. This position leverages data analytics, ATI Vision, and data acquisition tools to optimize system behavior, improve engine control, improve product reliability, and increase engine performance across a range of gaseous fueled applications. Major Responsibilities: Develop engine systems and components for engine performance using design reviews, testing, problem solving, and calculations to support engine and generator design. Conduct testing to evaluate the engine and systems relative to performance and emissions. Conduct system analysis using development processes to aid in optimizing the transient, emissions, and steady-state performance of the engine/generator. Interpret testing results and collaborate with cross-functional teams through design reviews and technical discussions to guide product development. Contribute to the development of engine workflows and analysis best practices to improve group efficiency and accuracy. Document project objectives, methods, and results using standardized reporting formats. Apply data analysis techniques, including Matlab/Simulink or Python-based scripting, and machine learning to support predictive modeling and performance forecasting. Stay informed on relevant technologies, tools, and industry trends to support continuous improvement. Minimum Job Requirements: Education: Bachelor's degree in Mechanical Engineering or Electrical Engineering, or related discipline Work Experience: 2 or more years of relevant work experience Knowledge, Skills, and Abilities: Experience in new IC engine design and development. Ability to create systems for internal combustion engines, including understanding of the effects of spark control, adjusting AFR for best performance and emissions, PID settings for best transient performance, MAP based control, calibrating w/EGR, and calibrating with a catalyst. Develops, tests, and integrates complex components and evaluates overall effectiveness, cost (including cost/benefit analysis), reliability (risk analysis), and safety. Designs, develops, executes, and evaluates testing, product specifications, and process validation plans for a variety of complex products and/or components. Ability to perform detail-oriented work with a high degree of accuracy on multiple projects. Good knowledge of internal combustion engine performance development and specification. Strong analytical and problem-solving skills, with a deep understanding of internal combustion engine design, operation, and testing. Written and verbal communication skills with the ability to clearly interpret and present complex simulation results to technical and non-technical audiences. Familiarity with machine learning and predictive analytics techniques applied to engine performance and emissions modeling. Collaborate with internal manufacturing partners, contract manufacturers, designers, and product specialists to optimize complex and advanced designs for performance. Preferred Job Requirements: Education: Master's degree in mechanical engineering, Aerospace Engineering, Computer Science, or a related field of study Work Experience: 3 years of hands-on experience in engine and engine system development 3 years of experience applying MATLAB/Simulink and Python in internal combustion engine design 3 years of experience using ATI Vision for calibrating internal combustion engines 2 years of experience in an Automotive, Development, or a related engineering discipline 2 years of hands-on experience with engine and engine component development 2 years of experience in powertrain data collection and analysis - ATI/CAN or similar 1 year of hands-on experience with ATI Vision as applied to engine control systems 1 year of experience in exhaust aftertreatment simulation with GT-Suite/GT-xCHEM or CHEMKIN. Knowledge, Skills, and Abilities: Comprehensive knowledge of internal combustion engines and effective engine test methods Experience with MATLAB/Simulink, Python, C/C+, Labview, Targetlink, Vision, ETOS or similar to modify embedded control software Extensive experience with internal combustion engine performance development and specification Demonstrated written communication and presentation skills Ability to apply engineering knowledge and experience to improve products, services and processes Data analysis and control/diagnostic feature creation skills Familiarity with systems engineering based problem solving Proven ability to work well with others as part of a diverse global team Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear; and use hands to manipulate objects or controls. The employee is regularly required to stand and walk. On occasion the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 - 50 pounds. Specific conditions of this job are typical of frequent and continuous computer-based work requiring periods of sitting, close vision and ability to adjust focus. Occasional travel. “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any other characteristic protected by law.”

Job Site Location US-IL-Chicago Requisition ID 2026-36216 Schedule Flexible hours Hire Type Temporary Life at Harvard Are you ready to be part of something Extraordinary? Look no further than Harvard is the largest family-owned provider of premier commercial janitorial and professional security services in the United States. We believe in the power of our people. Here, every team member is valued, empowered, and trained to contribute their best. We foster an inclusive workplace culture where diversity is celebrated and every voice matters. A day in the life: The Mechanic is responsible for performing a variety of general and preventative maintenance duties. This includes installing, repairing, and maintaining building equipment and systems in a safe and efficient manner to ensure uninterrupted facility operations. What you'll do as an Exceptional Team Member Perform routine and emergency maintenance services as scheduled. Conduct basic facility repairs, including changing light bulbs, minor plumbing work, and fixture replacements. Complete assigned work orders and tasks in a timely and professional manner. Conduct outdoor cleanup including trash pickup around the building and parking areas. Perform preventive maintenance on equipment and machinery as directed. Properly use, maintain, and store tools and equipment. Operate all mechanical and maintenance equipment safely and according to guidelines. Monitor and maintain assigned building systems and respond to issues as needed. Identify and report safety hazards and take appropriate action. Maintain courteous and professional behavior when interacting with residents, vendors, contractors, and colleagues. Work independently and efficiently without close supervision. What you'll need to be an Extraordinary Team Member High School Diploma or equivalent required. Minimum of 1 year of commercial or facilities-related maintenance experience. Basic knowledge of maintenance trades such as electrical, plumbing, and general repairs. Strong communication and interpersonal skills. Willingness to work flexible or assigned shifts, including nights or weekends if required. The Harvard Promise Join our team of Extraordinary People committed to delivering Exceptional Service. Together, we'll redefine industry standards and create a workplace where your talent thrives. Discover your potential with Harvard Maintenance. Learn more about our company and culture, apply today and be part of something extraordinary. ******************** Harvard is offering a competitive salary structure including benefit package with medical, dental, life, and long-term disability (LTD) insurance along with 401K Savings Plan. An Equal Opportunity Employer --- M/F/D/V Our Salary & Wage Details USD $20.00/Hr. Schedule Flexible hours

We are Generac, a leading energy technology company committed to powering a smarter world. Over the 60 plus years of Generac's history, we've been dedicated to energy innovation. From creating the home standby generator market category, to our current evolution into an energy technology solutions company, we continue to push new boundaries. The Mechanical Engineer II-Engines plays an important role in advancing the design and performance of internal combustion engines (ICE), through engine development, data-driven analysis, testing, and design of system components. This position leverages data analytics, ATI Vision, and data acquisition tools to optimize system behavior, improve engine control, improve product reliability, and increase engine performance across a range of gaseous fueled applications. Major Responsibilities: Develop engine systems and components for engine performance using design reviews, testing, problem solving, and calculations to support engine and generator design. Conduct testing to evaluate the engine and systems relative to performance and emissions. Conduct system analysis using development processes to aid in optimizing the transient, emissions, and steady-state performance of the engine/generator. Interpret testing results and collaborate with cross-functional teams through design reviews and technical discussions to guide product development. Contribute to the development of engine workflows and analysis best practices to improve group efficiency and accuracy. Document project objectives, methods, and results using standardized reporting formats. Apply data analysis techniques, including Matlab/Simulink or Python-based scripting, and machine learning to support predictive modeling and performance forecasting. Stay informed on relevant technologies, tools, and industry trends to support continuous improvement. Minimum Job Requirements: Education: Bachelor's degree in Mechanical Engineering or Electrical Engineering, or related discipline Work Experience: 2 or more years of relevant work experience Knowledge, Skills, and Abilities: Experience in new IC engine design and development. Ability to create systems for internal combustion engines, including understanding of the effects of spark control, adjusting AFR for best performance and emissions, PID settings for best transient performance, MAP based control, calibrating w/EGR, and calibrating with a catalyst. Develops, tests, and integrates complex components and evaluates overall effectiveness, cost (including cost/benefit analysis), reliability (risk analysis), and safety. Designs, develops, executes, and evaluates testing, product specifications, and process validation plans for a variety of complex products and/or components. Ability to perform detail-oriented work with a high degree of accuracy on multiple projects. Good knowledge of internal combustion engine performance development and specification. Strong analytical and problem-solving skills, with a deep understanding of internal combustion engine design, operation, and testing. Written and verbal communication skills with the ability to clearly interpret and present complex simulation results to technical and non-technical audiences. Familiarity with machine learning and predictive analytics techniques applied to engine performance and emissions modeling. Collaborate with internal manufacturing partners, contract manufacturers, designers, and product specialists to optimize complex and advanced designs for performance. Preferred Job Requirements: Education: Master's degree in mechanical engineering, Aerospace Engineering, Computer Science, or a related field of study Work Experience: 3 years of hands-on experience in engine and engine system development 3 years of experience applying MATLAB/Simulink and Python in internal combustion engine design 3 years of experience using ATI Vision for calibrating internal combustion engines 2 years of experience in an Automotive, Development, or a related engineering discipline 2 years of hands-on experience with engine and engine component development 2 years of experience in powertrain data collection and analysis - ATI/CAN or similar 1 year of hands-on experience with ATI Vision as applied to engine control systems 1 year of experience in exhaust aftertreatment simulation with GT-Suite/GT-xCHEM or CHEMKIN. Knowledge, Skills, and Abilities: Comprehensive knowledge of internal combustion engines and effective engine test methods Experience with MATLAB/Simulink, Python, C/C+, Labview, Targetlink, Vision, ETOS or similar to modify embedded control software Extensive experience with internal combustion engine performance development and specification Demonstrated written communication and presentation skills Ability to apply engineering knowledge and experience to improve products, services and processes Data analysis and control/diagnostic feature creation skills Familiarity with systems engineering based problem solving Proven ability to work well with others as part of a diverse global team Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear; and use hands to manipulate objects or controls. The employee is regularly required to stand and walk. On occasion the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 - 50 pounds. Specific conditions of this job are typical of frequent and continuous computer-based work requiring periods of sitting, close vision and ability to adjust focus. Occasional travel. “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any other characteristic protected by law.”

*This job is also open to Ukrainian refugees with an FAA A&P or equivalent license. We will assist in the process of working in the U.S. Under general supervision the Aircraft Mechanic is responsible for the maintenance, modification and servicing of aircraft and aircraft components in accordance with manufacturer's specification and FARS. JOB ACCOUNTABILITIES The following are essential job accountabilities: Perform routine scheduled maintenance and inspection of aircraft in accordance with ACC's and current manufacturers specifications. Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damages components. Modifies aircraft systems or components following drawings, engineering orders and technical publications. Assemble and install electrical, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools. Provide emergency/unscheduled repairs to minimize aircraft downtime. Requires ability to travel. Review maintenance records and flight logs to schedule prescribed maintenance checks and overhauls. Process all necessary documentation and paperwork for processes completed including OJT. Follow all clean up and housekeeping procedures. Comply with all quality, safety and sanitation regulations. JOB SPECIFICATIONS Minimum Education: High School Diploma or equivalent Preferred Education: One to two years technical college/training or equivalent Certifications/Licenses: FAA Airframe and Powerplant or equivalent Preferred Experience: Up to six years or more experience Skills: Interpret drawings, specifications and schematics of aircraft parts/components Problem solving and independent decision making skills Good communication skills Exercise good judgment in working with people in a team environment as well as in aircraft maintenance and safety Machine Skills: Operate hand and power tools Calculator, PC, telephone, and fax machine Environmental: Exposure to weather. Work may be performed out of doors Physical Demands: Ability to climb ladders, sit stand crouch bend for extended periods Vision Requirements: Accommodation: ability to adjust vision to bring objects into focus Communication: Communicate effectively with others in the work environment and external customers Representation: Represent the company in a professional and positive manner Contacts: Exchange information with employees and external customers The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an all inclusive list of all responsibilities and skills required for the position. Nothing in this job description restricts Management's right to assign or reassign duties and responsibilities. ОРисание: ÐœÐµÑ Ð°Ð½Ð¸Ðº Рланера / силовой установки ОБЗОРРАБОТЫ Под общим контролем Ð¼ÐµÑ Ð°Ð½Ð¸Ðº A&P несет ответственность за Ñ‚ÐµÑ Ð½Ð¸Ñ‡ÐµÑÐºÐ¾Ðµ обслуРивание, модификацию и обслуРивание самолетов и комРонентов самолетов в соответствии со сРецификацией Рроизводителя и FARS. Обязанности: ДОЛЖНОСТНАЯ ОТВЕТСТВЕННОСТРНиРе Реречислены основные рабочие учетные заРиси: · ВыРолняйте Рлановое Ñ‚ÐµÑ Ð½Ð¸Ñ‡ÐµÑÐºÐ¾Ðµ обслуРивание и осмотр самолетов в соответствии со сРецификациями ACC и Ð´ÐµÐ¹ÑÑ‚Ð²ÑƒÑŽÑ‰Ð¸Ñ Ð Ñ€Ð¾Ð¸Ð·Ð²Ð¾Ð´Ð¸Ñ‚ÐµÐ»ÐµÐ¹. · Прочтите и интерРретируйте руководства и сРецификации Ро Ñ‚ÐµÑ Ð½Ð¸Ñ‡ÐµÑÐºÐ¾Ð¼Ñƒ обслуРиванию самолетов, чтобы оРределить возмоРность и метод ремонта или замены Ð½ÐµÐ¸ÑÐ Ñ€Ð°Ð²Ð½Ñ‹Ñ Ð¸Ð»Ð¸ Ð Ð¾Ð²Ñ€ÐµÐ Ð´ÐµÐ½Ð½Ñ‹Ñ ÐºÐ¾Ð¼Ð Ð¾Ð½ÐµÐ½Ñ‚Ð¾Ð². · Модифицирует системы или комРоненты самолета в соответствии с чертеРами, Ñ‚ÐµÑ Ð½Ð¸Ñ‡ÐµÑÐºÐ¸Ð¼Ð¸ заказами и Ñ‚ÐµÑ Ð½Ð¸Ñ‡ÐµÑÐºÐ¸Ð¼Ð¸ Рубликациями. · Сборка и установка ÑÐ»ÐµÐºÑ‚Ñ€Ð¸Ñ‡ÐµÑÐºÐ¸Ñ , Ð¼ÐµÑ Ð°Ð½Ð¸Ñ‡ÐµÑÐºÐ¸Ñ , Ð³Ð¸Ð´Ñ€Ð°Ð²Ð»Ð¸Ñ‡ÐµÑÐºÐ¸Ñ Ð¸ ÐºÐ¾Ð½ÑÑ‚Ñ€ÑƒÐºÑ†Ð¸Ð¾Ð½Ð½Ñ‹Ñ ÐºÐ¾Ð¼Ð Ð¾Ð½ÐµÐ½Ñ‚Ð¾Ð² и аксессуаров с исРользованием Ñ€ÑƒÑ‡Ð½Ñ‹Ñ Ð¸ электроинструментов. · ОбесРечьте аварийный/внеРлановый ремонт, чтобы свести к минимуму время Рростоя самолета. Требуется умение Рутешествовать. · Просмотрите заРиси о Ñ‚ÐµÑ Ð½Ð¸Ñ‡ÐµÑÐºÐ¾Ð¼ обслуРивании и Рурналы Ролетов, чтобы заРланировать РредРисанные Рроверки Ñ‚ÐµÑ Ð½Ð¸Ñ‡ÐµÑÐºÐ¾Ð³Ð¾ обслуРивания и каРитальный ремонт. · Обработайте всю Ð½ÐµÐ¾Ð±Ñ Ð¾Ð´Ð¸Ð¼ÑƒÑŽ документацию и документы для Ð·Ð°Ð²ÐµÑ€ÑˆÐµÐ½Ð½Ñ‹Ñ Ð Ñ€Ð¾Ñ†ÐµÑÑÐ¾Ð², включая OJT. · Соблюдайте все Рроцедуры Ро уборке и уборке. · Соблюдение Ð²ÑÐµÑ Ð½Ð¾Ñ€Ð¼ качества, безоРасности и санитарии. Требования к образованию СПЕРИФИКАРИЯ РАБОТЫ: Минимальное образование: · ДиРлом средней школы или эквивалент ПредРочтительное образование: · От одного до Ð´Ð²ÑƒÑ Ð»ÐµÑ‚ Ñ‚ÐµÑ Ð½Ð¸Ñ‡ÐµÑÐºÐ¾Ð³Ð¾ колледРа/обучения или эквивалентного Сертификаты/лицензии: · Планер и силовая установка FAA (или украинский аналог) Требования к оРыту Навыки и умения: · ИнтерРретация чертеРей, сРецификаций и ÑÑ ÐµÐ¼ частей/комРонентов самолета. · Навыки решения Рроблем и самостоятельного Рринятия решений · Ñ Ð¾Ñ€Ð¾ÑˆÐ¸Ðµ коммуникативные навыки · Проявляйте здравый смысл Рри работе с людьми в командной среде, а такРе Рри обслуРивании и обесРечении безоРасности Ð²Ð¾Ð·Ð´ÑƒÑˆÐ½Ñ‹Ñ ÑÑƒÐ´Ð¾Ð². Машинные навыки: · Работать ручным и электроинструментом · Калькулятор, ПК, телефон и факсимильный аРРарат Квалификация Условия окруРающей среды: · воздействие Рогоды. Работы могут выРолняться на открытом Ð²Ð¾Ð·Ð´ÑƒÑ Ðµ Физические требования: · СРособность Родниматься Ро лестнице, сидеть, стоять, Рриседать в течение длительного времени. Физическая сила: · Требования к зрению: сРособность настраивать зрение, чтобы сфокусировать объекты. коммуникация: · Рффективно общаться с другими в рабочей среде и внешними клиентами Рредставление: · Представлять комРанию Ррофессионально и Розитивно Контакты: · Обмен информацией с сотрудниками и внешними клиентами We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, including sexual orientation and gender identity or expression, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Summary Experimental Aircraft Technicians II are advanced-level team members who play a critical role in DeltaHawk Engines' airframe integration, experimental testing, and certification efforts. In addition to performing maintenance and modifications, they serve as technical mentors and contribute significantly to the development of procedures, tooling, and feedback loops between engineering and operations. This position demands a high level of technical skill, problem-solving ability, and autonomy in decision-making. Working closely with engineering, flight test, and quality teams, the Aircraft Technician II ensures experimental aircraft and test assets are maintained, configured, and documented to the highest safety and performance standards, directly supporting DeltaHawk's mission of innovation and aviation safety. Essential Duties & Responsibilities An individual in this position must be able to perform the duties and responsibilities listed below with minimal supervision. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. Independently perform complex maintenance, troubleshooting, and modification tasks on experimental aircraft, including engine, airframe, avionics, and electrical systems Lead the installation and configuration of new experimental engines into testbed airframes Interpret engineering drawings and interface with design engineers to resolve discrepancies or implement improvements Provide technical guidance and mentorship to junior technicians; assist in on-the-job training Author or revise shop procedures and contribute to process development for new builds and test configurations Maintain detailed and accurate documentation of work performed, including changes to aircraft systems or configurations Support and execute ground and flight test operations, including pre-flight inspections, test setup, and post-test analysis Identify and proactively address safety or quality issues in the shop or hangar environment Required Qualifications Minimum 5+ years of hands-on experience in experimental, military, general aviation, or light sport aircraft maintenance Strong understanding of regulatory requirements (FAA, ASTM, etc.) and experimental aircraft certification practices Demonstrated ability to work independently with limited oversight in a dynamic R&D environment Advanced troubleshooting skills without reliance on OEM documentation Proficiency in reading and interpreting mechanical drawings, wiring diagrams, and technical documents An active plan underway to obtain A&P certification Strong organizational skills in managing tools, parts, and test setups Effective verbal and written communication, including clear documentation of changes, issues, and procedures Computer proficiency in file management, spreadsheets, and digital documentation systems Physical ability to lift 45 lbs multiple times per shift and work in a variety of positions Overtime and domestic travel may be required Tools will be provided Preferred Qualifications Experience with experimental aircraft, homebuilt aircraft, or prototype engine integration Familiarity with FAA experimental aircraft inspection, documentation, and sign-off procedures Expertise in at least one aircraft system (e.g., electrical harnessing, avionics wiring, hydraulic/pneumatic systems, etc.) Experience with basic machining, fabrication, or composite repair Prior involvement in flight test programs or engine development projects is highly desirable Working Conditions Work is conducted in typical hangar, mechanical shop, and engine test cell environments. This position may occasionally require travel, overtime, or off-site support during critical testing or integration phases. Safety protocols must be followed at all times in accordance with company and FAA standards.

Job Details Description Are you looking for a career within the Airline Industry? Do you want to work in a fun, challenging and fast-paced environment? At Menzies Aviation your career growth is endless with opportunities for advancement, ability to transfer and work in other major airports. Hear from our team of fuelers @ https://www.youtube.com/watch?v=he TA0cmrgOA Paid Training Base rate $15.00hr Shifts - 1st shift 4am-12:30pm - you MUST have open availability to work weekends, and holidays Uniforms Provided Key Responsibilities Perform fueling in a safe and efficient manner Drive and operate fuel trucks, hydrant cards, and stationary carts to fuel aircraft at the Cincinnati / Northern Kentucky Airport Responsible for accurate accounting of fuel transactions Perform daily Quality Control checks on equipment, Maintain equipment in clean and functional condition Ensure the correct loading and balancing of fuel Responsible for defueling aircraft as directed Comply with attendance standards Qualifications Must be at least 18 years of age Must possess a valid US driver's license Must pass pre-employment drug screen & color vision test Must pass background check and obtain US Customs seal Ability to proficiently read, write and speak English Handle fueling carts and fueling hoses which will require you to lift and move up to 70lbs Ability to perform basic math calculations Work is done primarily outdoors; must be comfortable working in all weather conditions Prior experience preferred including possession of a Commercial Driver's License or experience in the Oil and Gas Industry (preferred) Benefits Three Health Plans through Meritain Health Two Dental Plans through Delta Dental Vision Insurance Plan through Met Life Vision Paid Vacation Accident Coverage Plan Critical Illness Coverage Plan Hospital Indemnity Coverage Plan Company Paid Employee Basic Life and AD&D Insurance $20,000. Voluntary Life and AD&D Insurance Voluntary Short-Term and Long-Term Disability Insurance 401K Savings Plan Employee Assistance Program Prepaid Legal Coverage Plan Identity Theft Protection Plan Pet Discount Coverage and Pet Insurance Plan

> At Lakeside Foods and our family of companies, we're committed to providing wholesome foods to enrich people's lives through food. We are a culture that pursues our vision of growth and innovation with passion, confidence, and commitment. We are strongest together - valuing collaborative contribution, transparency and new ideas to enable change and growth. We are committed to an inclusive and respectful environment that promotes a healthy work-life balance, and there's a seat at the table for you. Become One of Our Valued Mechanics: Here at Lakeside Foods, our maintenance team is the backbone of our operations, ensuring equipment runs optimally while taking care of the facility. Maintenance mechanics/technicians are respected "Jack of All Trades" team members, performing mechanical and fabrication updates and using their knowledge to improve production processes. If you are a creative problem-solver who perseveres through challenging equipment repairs, we want to talk with you. What You'll Get: * Competitive wages based on experience and Mechanical placement test * Off-season schedule: Four 10's Monday - Thursday * Production season (July - November): Flexible scheduling with OT availability * Stable work environment with a growing company * Schedules to maintain work/life balance * Excellent market-leading low cost medical insurance, dental and vision insurance * Paid vacation and personal time after 30 days of employment * Retirement plan with company match * Prescription safety glasses & safety shoe reimbursement * Advancement opportunities * Paid onsite training * Broken tool replacement program What You'll Do: * Responsible for the efficient flow of product through the assigned area and the minor repair and maintenance of all machinery in the assigned area. * Train seasonal in the proper, safe, and efficient operation of the machinery to which they are assigned. * Supervise seasonal employees in their day-to-day duties. * Handle minor personnel problems. Refer major problems to the Supervisor. * Will assist in any number of maintenance activities including assisting machine repair/overhaul, * cleaning, building walkways and work platforms, and assisting in the installation of new processing * equipment. What You'll Bring: * High school diploma or general education degree (GED) and six months to one year related experience and/or training.Positive attitude * Must possess a complete set of tools for industrial maintenance. * Must have general knowledge of both gas and arc, how to cut and thread pipe, bolt and thread sizes, how to fasten pulleys and sprockets on shafts, and how to adjust conveyors. * Strong work ethic * Safety mindset Where You'll Work: WELCOME TO BELGIUM Located off of I-43, just 30 miles north of Milwaukee, 8 miles north of Port Washington, and half way between Chicago and Door County, Belgium offers year round activity for visitors. From the Harrington Beach State Park, the Ozaukee Interurban Trail and other opportunities such fishing, boating, running, biking there is something for everyone no matter what time of year! Lakeside Foods and our family of companies welcomes people of all backgrounds and the varied ideas they bring to the workplace. Being an equal opportunity and affirmative action employer is part of our heritage and culture. We recruit, hire and promote employees based on qualifications and merit, without regard to race, religion, age, gender, disability, marital or veteran status. Lakeside Foods participates in E-Verify. M/F/D/V Nearest Major Market: Milwaukee

Aircraft Mechanic I (23021): Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti- icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair. May be required to be licensed by Federal Aviation Administration. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Federal Aviation Administration (FAA) licensing of contractor employee technical proficiency is not required. An Aircraft Mechanic I shall be the equivalent of a Marine Corps Collateral Duty Inspector. Additional required skills for corrosion control personnel: Respirator fit qualified Aircraft Corrosion Control (N-701-0013) certification. Aircraft tow qualifications or equivalent Experience with aircraft powerline maintenance Mechanic I Functions: The Contractor Aircraft Mechanic I, in addition to the specified corrosion functions and tasks, shall be trained and qualified as Collateral Duty Inspectors (CDI) in accordance with the Naval Aviation Maintenance Program 4790 and all local and command requirements. The Contractors qualified as Mechanic I shall serve within work centers 120 (Airframes). They shall be responsible for performing maintenance in their respective qualifications as a Mechanic I CDI. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Airframes/Structures/Hydraulics and related Sub-Systems, and Aircraft Logs and Records Administration Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. Aircraft Mechanic I shall have experience writing with clarity and technical accuracy, and exhibit leadership and ensure adherence to all applicable policies and procedures. Possess a high degree of expertise in the control and coordination of aircraft maintenance. Thorough working knowledge of applicable maintenance/technical manuals and publications. Thorough working knowledge of aircraft maintenance records. Working understanding of the aircraft and aircraft systems Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Aircraft Organizational Level (O-Level) Maintenance Support, General Aircraft Maintenance, Corrosion Prevention, Detection, and Abatement/Repair as required for KC-130J aircraft Maintain assigned aircraft/aeronautical equipment in a manner that meets or exceeds the requirements of the CNAFINST 4790.2 (series) programs IAW the Performance Work Statement (PWS) Scheduled and unscheduled Organizational (O-Level) Maintenance Support Maintenance Control planning and management Aircraft maintenance action documentation via records, forms, and electronic means Support Equipment operations and inspections Aircraft inspections Aircraft Movement Corrosion Control/Aircraft Painting Troubleshooting Preservation and de-preservation General aircraft maintenance Technical Directive compliance and modifications Initiate and Complete Maintenance Action Forms via Optimized Organizational Maintenance Activity (OOMA) or hard copy. Perform duties as Collateral Duty Inspector (CDI) for Airframes, Power Plants, and Avionics Systems. Vibration Analysis Operator / Interpreter Tire and Wheel Hydraulic Contamination APU operations Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Other duties as assigned Preferred Qualifications: 7 years or more of Organizational level maintenance 5 years or more maintenance experience on KC-130J aircraft NALCOMIS OOMA Familiarization/Naval Aviation Maintenance Control Management Course (Course D/E-555-0053 OR A COMBINATION OF NALCOMIS OOMA Familiarization Course (Course D/E-555-0054) and Naval Aviation Maintenance Control Course (Course D/E-555-0040) Previously Safe For Flight certified Previously Collateral Duty Quality Assurance Representative (CDQAR) for Airframes, Power Plants, and/or Avionics Systems Qualified as Vibration Analysis Operator/Interpreter Tire and Wheel certified Hydraulic Contamination APU Operator Aircraft Tow qualifications as wing walker, Tow Supervisor, and driver Aircraft paint and final finish Basic Qualifications: Aircraft Mechanic I shall have a minimum of three years aircraft maintenance experience Previously Collateral Duty Inspector (CDI) for Airframes Systems Aircraft Corrosion Control (N-701-0013) certification Must be eligible for Common Access Card (CAC) Must be deployable to locations Outside Continental U.S. (OCONUS) Employment is contingent on a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; (d) your ability to get a required clearance by your effective start date, if needed

Job Description Our client has been synonymous with dependability and quality in the air freight industry since 1986. As the company has grown, so has the number of industries it serves. Today, the company continues to provide the most excellent customer care-driven service to the air freight industry and many others. By carrying over the core belief structure forged in the air freight business of providing the customer what they want on time and at a competitive rate, our client can provide superior air freight services to our growing list of satisfied customers. They are currently recruiting for an A&P Mechanic job in Milwaukee, WI. What Is In It For You Position Type: Permanent - Full-time Benefits: Health, Dental, Vision, Life, STD/LTD, Vacation Pay, Sick Pay, Holiday Pay, 401(k) A Day In The Life of an A&P Mechanic The position you are applying for will be under general supervision. You are responsible for the maintenance, modification, and servicing of aircraft and aircraft components following the manufacturer's specification and FARS. Essential Duties of The A&P Mechanic Perform routine scheduled maintenance and aircraft inspection by ACC's and current manufacturers' specifications. Read and interpret aircraft maintenance manuals and specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components. Modifies aircraft systems or components following drawings, engineering orders, and technical publications. Assemble and install electrical, mechanical, hydraulic, and structural components and accessories using hand and power tools. Provide emergency/unscheduled repairs to minimize aircraft downtime. Requires ability to travel. Review maintenance records and flight logs to schedule prescribed maintenance checks and overhauls. Process all necessary documentation and paperwork for processes completed. Follow all clean-up and housekeeping procedures. Comply with all quality, safety, and sanitation regulations. JOB SPECIFICATIONS Minimum Education: High School Diploma or equivalent Preferred Education: One to two years of technical college/training or equivalent Certifications/Licenses: FAA Airframe and Powerplant Minimum Experience: Up to three to five years or more experience Preferred Experience: Up to six years or more experience Skills: Interpret drawings, specifications, and schematics of aircraft parts/components. Problem-solving and independent decision-making skills Good communication skills Exercise good judgment in working with people in a team environment as well as in aircraft maintenance and safety. Machine Skills: Operate hand and power tools Calculator, PC, telephone, and fax machine Environmental Conditions: Exposure to weather. Work may be performed of doors Physical Demands: Ability to climb ladders, sit-stand, crouch bend for extended periods Physical Strength: Vision Requirements: Accommodation: The ability to adjust vision to bring objects into focus Communication: Communicate effectively with others in the work environment and external customers Representation: Represent the company in a professional and positive manner Contacts: Exchange information with employees and external customers If you are interested in the A&P Mechanic job in Milwaukee, WI, apply today! This vacancy is being advertised by Total Aviation Staffing, LLC. The services advertised by Total Aviation Staffing, LLC are those of an Employment Agency