Aircraft mechanic jobs in Oklahoma - 45 jobs

The **Aircraft Mechanic 2** (CH-47) Oversees and performs maintenance on helicopters, excluding repair of systems according to drawings, blueprints, directives, technical manuals and safety procedures. + May be required to perform any AM1 task. + Oversees removal and installation aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, mechanical flight controls and their components. + Oversees and services and lubricates aircraft and subsystems. + Oversees preparation of aircraft for inspections and maintenance checks. + Oversees and performs scheduled inspections and assists in performing special inspections. + Oversees and performs limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required. + Oversees and use of and performs operator maintenance on tools, special tools and aircraft ground support equipment. + Oversees preparation of forms and records related to aircraft maintenance. + Oversees, removes and disassembles defective parts of the aircraft. + Oversees maintaining the supplies and perform preventive maintenance. + Performs additional duties, including maintenance duties, as requested. + Adheres to company policies and safety programs (Safety-first mentality) **Minimum Requirements** + High School Diploma or equivalent is required. + U.S. military technical school or specialized training course is desired; certification of education level is required. + Valid up-to-date A&P license _(optional_ ) + Must have three years aviation maintenance experience, three years rotary wing aircraft experience, and two years on the assigned Mission Design Series (MDS). All experience must be within the six most recent years. + Valid Driver's License. + Must provide own tools/toolbox. Recruiters will provide toolbox requirements to candidates upon selection. **Clearance Requirements** + Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility. **Knowledge & Skills** + Thorough knowledge of aircraft systems on the assigned MDS. + Advanced knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, hydraulic press machine, and those listed in the assigned MDS Maintenance Allocation Chart (MAC). + Advanced knowledge of technical publications and Logistics Information Systems. + Able to prioritize workloads to maintain schedules on assigned projects + Possess the level of experience to inspect all required aeronautical type maintenance to be performed by aircraft mechanic. + The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. **Physical Requirements/Working Environment** + Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. + Must be able to climb stairs, ramps, ladders, and work stands. + Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. + May be required to lift/push/pull heavy objects whose weight may exceed 50 pounds. + Must be able to type using a standard keyboard to communicate through e-mail and various software applications. + Will handle dirty parts and lubricants. + Will be required to wear proper Personal Protective Equipment (PPE). + Must be able to pass a Respirator Physical and Fit Test qualification. + May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. + May work in maintenance shop or outside. + Must be able to work in a shop where the environment is drafty, noisy, and dirty. + May be exposed to extreme noise from operating equipment. + May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. + May be expected to work in austere environments and all-weather conditions. **Compensation Details:** $40.18CBA Hourly Pay Rate plus $5.10 H&W The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. **Benefits Overview:** Our health and welfare benefits are designed to support you and your priorities. Offerings include: + Health, dental, and vision insurance + Paid time off and holidays + Retirement benefits (including 401(k) matching) + Educational reimbursement + Parental leave + Employee stock purchase plan + Tax-saving options + Disability and life insurance + Pet insurance _Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits._ **Original Posting:** 01/12/2026 - Until Filled Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. Inspecting and repairing ground support equipment Installing and removing Quick Engine Change (QEC) kits on aircraft engines Dealing with Coworkers/Clients/public JOB DUTIES: Responsibilities may include, but are not limited to: Performing engine QEC buildup actions, both assembly and tear down. Uses automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems Inspects, tests, and operates GSE to determine equipment serviceability and proper operation Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and components Removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories Stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses Disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations Operates, cleans, inspects, and services GSE towing vehicles; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations. Practices good housekeeping, tool control, Foreign Object Damage prevention and safety at all times. Additional responsibilities include working with a variety of repair and test equipment including welders, torches, pressure testers and electrical testers to name a few. Completing all required documentation and tagging requirements of QEC items. Order QEC parts from COMBS. Refer to technical publications to determine specifications to be met. Track and record calibration dates to insure that support equipment is up to date. Keep files with documentation and certifications of calibrated equipment. Ensure that equipment is sent out for calibration when due. Ensure that all equipment is accounted for. Assign I.D. numbers to each piece of equipment. When turning over equipment to the operating command make certain to have them sign a receipt for all equipment to keep on file in COMBS. Each LD. number must have a file of record. Performs maintenance and inspections on (GSE) according to applicable maintenance manuals, manufacturer specifications and FAA regulations. Research and order materials for repair of support equipment. Performs engine QEC build-up actions, i.e. assembly and teardown. Cleaning of warehouse, shops, offices and restrooms as required. Clerical and other assigned duties as required. Prepares GSE for storage and transportation Other Duties as assigned Abide by all Company policies and procedures not otherwise noted above. QUALIFICATIONS: Knowledge, Skills, and Abilities (Required Skills include the ability to:) Understanding of scheduling techniques and technical order requirements. Ability to accurately troubleshoot and repair complex aircraft engine/support equipment systems. Mental and visual ability to read and understand detailed technical publications and instructions. Ability to communicate effectively, both orally and in writing. Ability to deal courteously with the customer. Knowledge of generally accepted accounting principles sufficient to perform the job, duties, and tasks associated with the position. Knowledge of contractual requirements. Extensive working knowledge in logistics and data information systems. Education and Experience: Graduation from a standard four (4) year high school or equivalent (GED). Minimum three (3) years recent aircraft maintenance experience Valid FAA Airframe and Power plant Certificate Benefits include the following: Healthcare coverage Retirement Plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

**ESSENTIAL FUNCTIONS:** The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. + Inspecting and repairing ground support equipment + Installing and removing Quick Engine Change (QEC) kits on aircraft engines + Dealing with Coworkers/Clients/public **JOB DUTIES:** Responsibilities may include, but are not limited to: + Performing engine QEC buildup actions, both assembly and tear down. + Uses automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems + Inspects, tests, and operates GSE to determine equipment serviceability and proper operation + Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and components + Removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories + Stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses + Disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations + Operates, cleans, inspects, and services GSE towing vehicles; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations. + Practices good housekeeping, tool control, Foreign Object Damage prevention and safety at all times. + Additional responsibilities include working with a variety of repair and test equipment including welders, torches, pressure testers and electrical testers to name a few. + Completing all required documentation and tagging requirements of QEC items. + Order QEC parts from COMBS. + Refer to technical publications to determine specifications to be met. + Track and record calibration dates to insure that support equipment is up to date. + Keep files with documentation and certifications of calibrated equipment. + Ensure that equipment is sent out for calibration when due. + Ensure that all equipment is accounted for. + Assign I.D. numbers to each piece of equipment. + When turning over equipment to the operating command make certain to have them sign a receipt for all equipment to keep on file in COMBS. + Each LD. number must have a file of record. + Performs maintenance and inspections on (GSE) according to applicable maintenance manuals, manufacturer specifications **and** FAA regulations. + Research and order materials for repair _of_ support equipment. + Performs engine QEC build-up actions, i.e. assembly and teardown. + Cleaning of warehouse, shops, offices and restrooms as required. + Clerical and other assigned duties as required. + Prepares GSE for storage and transportation + Other Duties as assigned + Abide by all Company policies and procedures not otherwise noted above. **QUALIFICATIONS:** + **Knowledge, Skills, and Abilities (Required Skills include the ability to:)** + Understanding of scheduling techniques and technical order requirements. + Ability to accurately troubleshoot and repair complex aircraft engine/support equipment systems. + Mental and visual ability to read and understand detailed technical publications and instructions. + Ability to communicate effectively, both orally and in writing. + Ability to deal courteously with the customer. + Knowledge of generally accepted accounting principles sufficient to perform the job, duties, and tasks associated with the position. + Knowledge of contractual requirements. + Extensive working knowledge in logistics and data information systems. + **Education and Experience:** + Graduation from a standard four (4) year high school or equivalent (GED). + Minimum three (3) years recent aircraft maintenance experience + Valid FAA Airframe and Power plant Certificate **Benefits include the following:** + Healthcare coverage + Retirement Plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources _Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans._ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. * Inspecting and repairing ground support equipment * Installing and removing Quick Engine Change (QEC) kits on aircraft engines * Dealing with Coworkers/Clients/public JOB DUTIES: Responsibilities may include, but are not limited to: * Performing engine QEC buildup actions, both assembly and tear down. * Uses automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems * Inspects, tests, and operates GSE to determine equipment serviceability and proper operation * Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and components * Removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories * Stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses * Disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations * Operates, cleans, inspects, and services GSE towing vehicles; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations. * Practices good housekeeping, tool control, Foreign Object Damage prevention and safety at all times. * Additional responsibilities include working with a variety of repair and test equipment including welders, torches, pressure testers and electrical testers to name a few. * Completing all required documentation and tagging requirements of QEC items. * Order QEC parts from COMBS. * Refer to technical publications to determine specifications to be met. * Track and record calibration dates to insure that support equipment is up to date. * Keep files with documentation and certifications of calibrated equipment. * Ensure that equipment is sent out for calibration when due. * Ensure that all equipment is accounted for. * Assign I.D. numbers to each piece of equipment. * When turning over equipment to the operating command make certain to have them sign a receipt for all equipment to keep on file in COMBS. * Each LD. number must have a file of record. * Performs maintenance and inspections on (GSE) according to applicable maintenance manuals, manufacturer specifications and FAA regulations. * Research and order materials for repair of support equipment. * Performs engine QEC build-up actions, i.e. assembly and teardown. * Cleaning of warehouse, shops, offices and restrooms as required. * Clerical and other assigned duties as required. * Prepares GSE for storage and transportation * Other Duties as assigned * Abide by all Company policies and procedures not otherwise noted above. QUALIFICATIONS: * Knowledge, Skills, and Abilities (Required Skills include the ability to:) * Understanding of scheduling techniques and technical order requirements. * Ability to accurately troubleshoot and repair complex aircraft engine/support equipment systems. * Mental and visual ability to read and understand detailed technical publications and instructions. * Ability to communicate effectively, both orally and in writing. * Ability to deal courteously with the customer. * Knowledge of generally accepted accounting principles sufficient to perform the job, duties, and tasks associated with the position. * Knowledge of contractual requirements. * Extensive working knowledge in logistics and data information systems. * Education and Experience: * Graduation from a standard four (4) year high school or equivalent (GED). * Minimum three (3) years recent aircraft maintenance experience * Valid FAA Airframe and Power plant Certificate Benefits include the following: * Healthcare coverage * Retirement Plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays * Learning and Development resources * Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

Alutiiq Operations Services, LLC has an exciting opportunity for a Fire Suppression System Mechanic supporting Tinker Air Force Base located in Oklahoma City, OK. The Fire Suppression System Mechanic performs the fire suppression duties necessary to maintain all buildings and structures in good repair. Keeps supervisor apprised of unique situations and problems encountered and identify and reports safety, environmental and other work requirements for resolution. Installs, maintains, and repairs installed fire suppression systems in accordance with manufacturer's specifications and National Fire Protection Association standards. Checks pressure gauges on suppression system storage containers and recharges or replaces containers. Performs visual inspections and testing on fire suppression equipment, to include fire pumps and replaces defective components. Visually inspects kitchen hood equipment and replaces defective components. Works with other Mechanics to share specialized skills and experience related to fire systems maintenance and repair. Respond to emergency site maintenance as required Work involves planning and layout of work from blueprints, drawings, models, or verbal instructions. Utilizes and interprets technical manuals, shop directives, blueprints, sketches, diagrams, and specifications, verbal and written instructions. Responsible for completing daily work order log documenting inspections, maintenance and repair information, to include work performed, materials used and hours worked on each assigned work order. Interfaces with customers and responsible for customer feedback, as applicable. Operates motor vehicles in accordance with company vehicle policies. Complies with applicable federal, state, United States Air Force (USAF) and Occupational Safety & Health Administration (OSHA) environmental laws and regulations. Complies with health and safety rules and procedures; performs work in a manner that enhances the safety of the work environment. Incumbent will at all times wear appropriate Personal Protective Equipment (PPE) as determined by position and duties. Performs other related duties as assigned. Accurate, timely, and cost-effective performance of duties. Working harmoniously with customers and fellow co-workers. Maintaining strict confidentiality of all Alutiiq LLC related matters. Accountable for assigned tools, materials and equipment. Cleanliness and safety of shop and work areas. Maintain a safe and healthy work environment within the shops and company vehicles. Utilizes experience to identify needed materials and required man hours to accomplish work. Material will need to be identified accurately enough so that either the Supervisor or clerk can order it. Additionally, required to check both Store Stock and Residue for material that can be utilized. Estimated work hours need to be close enough so supervision can determine needed crew size and method of accomplishment and proper scheduling. This includes the need to schedule utility outages. Requirements High School diploma or equivalency. Current state driver's license, acceptable driving record, and proof of valid insurance. Minimum Five (5) years' experience in repairing and testing of suppression systems. Valid Sprinkler Technician License with the ability to obtain an Oklahoma Sprinkler Technician License within 90 days of employment. Ability to obtain Oklahoma Fire Extinguisher License. Must be knowledgeable in addressable and conventional alarm panels. Must be knowledgeable in water mist special hazard systems. Must be knowledgeable in CO2 special hazard systems. Must be knowledgeable in testing backflow devices. Must be knowledgeable in testing of fire pumps. Must be knowledgeable in operating boom and/or scissor lifts. Ability to obtain and maintain all necessary licenses/IDs/certifications. Ability to solve problems and work independently with minimal supervision. Familiarity with facility/infrastructure codes and standards, as applicable. Ability to adapt to changes in technology and applicable facility/infrastructure codes and standards. Proficiency and knowledge of a variety of hand and power tools. Demonstrated working ability read, write, speak and understand English. Preferred Qualifications and Experience: Seven (7+) years in repairing and testing of suppression systems. Basic computer skills and familiarity with Microsoft Office applications. Military experience. Previous experience working on a military installation. Experience working on Tinker facilities. Basic computer skills (Excel, Word, etc.) Familiarity with military-specific facility/infrastructure codes and standards, as applicable.

Aircraft Maintenance Technician (AMT) IMMEDIATELY HIRING! A&P Mechanic- Rotor Wing FULL-TIME Opportunity in Ada, OK * Starting Salary: $63,960 to $93,288 annually * IA Stipend 2,080 * Sign-On Bonus 12,500 We're hiring an Aircraft Maintenance Technician (AMT) responsible for the overall maintenance and safety of our fleet within Air Evac Lifeteam. This technician will be qualified to support our airframe. This is a key role to ensure our team can safely maintain and deliver timely and high-quality transportation services, care and customer service to patients. Responsibilities * Aircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. * Manage inventory checks to ensure stock of supplies and equipment, regularly update the equipment tracking log, place replacement requests when necessary and document part expenditures. * Clearly document service paperwork and FAA information as required and adhere to policies and procedures while complying with the company's information security standards. * Take pride in sustaining a safe and clean working environment for the aircraft maintenance team and flight crew. * Use appropriate communication methods to help facilitate coordination of efforts between departments, vendors and team members. * Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow AMTs and operations team. Minimum Required Qualifications * Two (2) years turbine powered helicopter experience * Valid Airframe and Powerplant (A&P) license * High School diploma or GED equivalent * Valid State issued Driver's License * Federal Aviation Regulations knowledge * EMS systems, Aircraft maintenance systems, records and maintenance support and planning * Ability to work a flexible schedule including overtime and 24/7 on-call rotations. * Must be acceptable in accordance with the FAA drug and alcohol testing program. * Must be able to push and/or pull 100+ lbs. * Must be able to lift and/or carry up to 50 lbs. Preferred Qualifications * Bell 206, Bell 407, EC130, EC135 maintenance experience * FAA Inspection Authorization Certificate * Related experience under CFR Part 135 * Autopilot maintenance experience * Avionics and electrical repair experience Why Choose Air Evac Lifeteam: As a national leader in air ambulance, Air Evac Lifeteam is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. Check out our careers site benefits page to learn more about our benefit options. R0049077

Global Channel Management is a technology company that specializes in various types of recruiting and staff augmentation. Our account managers and recruiters have over a decade of experience in various verticals. GCM understands the challenges companies face when it comes to the skills and experience needed to fill the void of the day to day function. Organizations need to reduce training and labor costs but at same requiring the best "talent " for the job. Qualifications Technical assistant needed for airline industry. Technical assistant requires: Extensive knowledge of Engine and Component Maintenance Manuals and their structure as defined by Technical Publications and the AA CRM/ESO process a plus. Strong analytical ability. Attention to detail a must. Excellent oral and written communication skills. Solid organizational skills vital. Self-motivated, sound judgment and decision making ability. Ability to read, write and fluently speak and understand the English language. Working knowledge of software applications used in document authoring and other departmental processes (e.g. SQL, Adobe Acrobat Pro, SGML, XML, MS Word, Excel, FileMaker Pro, Access, SharePoint, Teradata etc.). Technical assistant for airline industry pays $20/hr Additional Information $120/HR 6 months+

In a team oriented work environment, under little to no supervision, Structural Mech III perform a variety of structural assembly operations using required tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. May assist and instruct other team members. Principle Duties and Responsibilities: Essential Functions: 1. Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements. Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft 2. Possess the proven ability to move to new tasks with only a moderate, short-term impact to established goal hours and schedule 3. Rivet structural members, assemblies and parts using all tools required to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Ability to remove fasteners without damaging structures 4. Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents 5. Check all work and ensure a defective free assembly prior to final inspection 6. Instruct and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems 7. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) 8. Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information 9. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity 10. Maintain a neat and orderly work area, supports the company 5S & Lean Initiative Program and complies with all safety regulations. Use of personal protective equipment as required Additional Functions: 1. Participate in continuous improvement activities 2. Properly use and maintain company-provided tools and equipment and returns items to tool room after use 3. Ensure standard operating procedures are followed when operating ground support equipment 4. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags 5. Ensure accurate daily job charging to the aircraft 6. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership Perform other duties as assigned. Education and Work Experience Requirements: High School Diploma or GED required. 4 years related structural assembly experience. Experience working with Solumina and Smarteam preferred... Q-stamp preferred. Other Requirements: 1. Basic computer and basic shop math skills 2. Read and comprehend basic documents and instructions and read a scale 3. Must have essential personal skills and possess aptitude for hands-on craftswork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules 4. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment 5. Ability to work with composite resins and materials 6. Must be able to work any shift 7. Must be able to climb ladders, stands, stairs, and work in small spaces or restricted areas & lift 50 lbs

Required Skills: High School Diploma or GED required. 4 years related structural assembly experience. Experience working with Solumina and Smarteam preferred. Q-stamp preferred. In a team oriented work environment, under little to no supervision, Structural Mech III perform a variety of structural assembly operations using required tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. May assist and instruct other team members. Principle Duties and Responsibilities: Essential Functions: 1. Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft 2. Possess the proven ability to move to new tasks with only a moderate, short-term impact to established goal hours and schedule 3. Rivet structural members, assemblies and parts using all tools required to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Ability to remove fasteners without damaging structures 4. Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents 5. Check all work and ensure a defective free assembly prior to final inspection 6. Instruct and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems 7. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) 8. Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information 9. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity 10. Maintain a neat and orderly work area, supports the company 5S & Lean Initiative Program and complies with all safety regulations. Use of personal protective equipment as required Additional Functions: 1. Participate in continuous improvement activities 2. Properly use and maintain company-provided tools and equipment and returns items to tool room after use 3. Ensure standard operating procedures are followed when operating ground support equipment 4. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags 5. Ensure accurate daily job charging to the aircraft 6. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership Perform other duties as assigned. Other Requirements: 1. Basic computer and basic shop math skills 2. Read and comprehend basic documents and instructions and read a scale 3. Must have essential personal skills and possess aptitude for hands-on craftswork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules 4. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment 5. Ability to work with composite resins and materials 6. Must be able to work any shift 7. Must be able to climb ladders, stands, stairs, and work in small spaces or restricted areas & lift 50 lbs

Join our client's team as a Lead Mechanic/Chief Inspector and play a crucial role in the aviation repair station. As a top-tier engine builder, with a specialty in high-performance engines, our client is seeking a skilled and experienced individual to lead the inspection department. If you have a passion for aircraft engines and a keen eye for quality work, we want to hear from you. Responsibilities: Perform non-destructive testing and assembly work. Train, oversee, and assist personnel within the repair station as directed. Maintain compliance with Federal Aviation Regulations and Airworthiness Directives. Ensure calibration checks on tools and equipment are up to date. Supervise all inspection stages from incoming to final approval for return to service. Manage records and documentation accurately. Identify defects, report unairworthy conditions, and follow QA procedures diligently. Qualifications: 5+ years of experience in aircraft engine maintenance/building. Powerplant license required; IA not mandatory. Level II/III NDT certification preferred. Extensive knowledge of reciprocating aircraft engines and their functions. Familiarity with Lycoming and Continental engine models. Strong communication and interpersonal skills. Our client offers a comprehensive benefits package including employer-paid medical and dental insurance, employee-paid vision coverage, a generous retirement savings plan with a matching program, and an annual bonus incentive. Join them and be part of a dynamic team focused on excellence in aviation engineering.

Role :- Structural Mech III Duration :- 48 Months Shift :- 1st Shift (Monday-Thursday, 05: 00AM -3: 30 PM) Pay Range :- $25.00 -28.75 per hour on W2 (All inclusive) Job Description: High School Diploma or GED required. 4 years related structural assembly experience. Experience working with Solumina and Smarteam preferred. Q-stamp preferred. Position Purpose: In a team oriented work environment, under little to no supervision, Structural Mech III perform a variety of structural assembly operations using required tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. May assist and instruct other team members. Principle Duties and Responsibilities: Essential Functions: 1. Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations;ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft 2. Possess the proven ability to move to new tasks with only a moderate, short-term impact to established goal hours and schedule 3. Rivet structural members, assemblies and parts using all tools required to do the job (e.G. Portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Ability to remove fasteners without damaging structures 4. Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents 5. Check all work and ensure a defective free assembly prior to final inspection 6. Instruct and assist other team members in interpretation of blueprints, drawings, and engineering orders;develop methods and shop aids to resolve production installation difficulties and problems 7. Maintain and use all logs and records (e.G. MIR sheets, DMTs, Crabs, PCOs) 8. Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information 9. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity 10. Maintain a neat and orderly work area, supports the company 5S & Lean Initiative Program and complies with all safety regulations. Use of personal protective equipment as required Additional Functions: 1. Participate in continuous improvement activities 2. Properly use and maintain company-provided tools and equipment and returns items to tool room after use 3. Ensure standard operating procedures are followed when operating ground support equipment 4. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags 5. Ensure accurate daily job charging to the aircraft 6. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership Perform other duties as assigned. Other Requirements: 1. Basic computer and basic shop math skills 2. Read and comprehend basic documents and instructions and read a scale 3. Must have essential personal skills and possess aptitude for hands-on craftswork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules 4. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment 5. Ability to work with composite resins and materials 6. Must be able to work any shift 7. Must be able to climb ladders, stands, stairs, and work in small spaces or restricted areas & lift 50 lbs

Aircraft Maintenance Technician (AMT) IMMEDIATELY HIRING! A&P Mechanic - Rotor Wing FULL-TIME Opportunity in Tahlequah, OK Starting Salary: $72,914 - $106,348 (including 14% geo modifier) IA Stipend 2,080 Sign-On Bonus 12,500 We're hiring an Aircraft Maintenance Technician (AMT) responsible for the overall maintenance and safety of our fleet within Med-Trans. This technician will be qualified to support our Bell 407 airframe. This is a key role to ensure our team can safely maintain and deliver timely and high-quality transportation services, care and customer service to patients. Responsibilities Aircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. Manage inventory checks to ensure stock of supplies and equipment, regularly update the equipment tracking log, place replacement requests when necessary and document part expenditures. Clearly document service paperwork and FAA information as required and adhere to policies and procedures while complying with the company's information security standards. Take pride in sustaining a safe and clean working environment for the aircraft maintenance team and flight crew. Use appropriate communication methods to help facilitate coordination of efforts between departments, vendors and team members. Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow AMTs and operations team. Minimum Required Qualifications Bell 407 Maintenance experience Three (3) years of turbine helicopter maintenance experience with a minimum of six months helicopter maintenance experience during the last 24 months Valid Airframe and Powerplant (A&P) license Valid State issued Driver's license High School diploma or GED equivalent Federal Aviation Regulations knowledge EMS systems, Aircraft maintenance systems, records and maintenance support and planning Ability to work a flexible schedule including overtime and 24/7 on-call rotations. Must be acceptable in accordance with the FAA drug and alcohol testing program. Must be able to push and/or pull 100+ lbs. Must be able to lift and/or carry up to 50 lbs. Preferred Qualifications FAA Inspection Authorization Certification Related experience under CFR Part 135 Autopilot maintenance experience Avionics and electrical repair experience Why Choose Med-Trans: As a national leader in air ambulance, Med-Trans is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Check out our careers site benefits page to learn more about our benefit options.

TITLE: Lead Mechanic QUALIFICATIONS: Must be 18 years of age or older Obtain / Maintain MinimumOklahomaClass B Commercial Driver License with Passenger and School Bus Endorsements Obtain / Maintain Oklahoma State Department of Education school bus driver certificate Obtain / Maintain current ASE certification for school buses. Pass a Department of Transportation physical examination at a facility designated by the Transportation Department including drug and alcohol test Lift and carry seventy-five (75) pounds across forty (40) feet of level ground Have own supply of hand tools and air tools needed to work on small vehicles, large trucks, and buses EDUCATION: High School diploma, GED or equivalent. EXPERIENCE: 5 or more years in auto and diesel mechanics preferred. Some training may be substituted for actual experience. REPORTS TO: Director of Transportation SKILLS, KNOWLEDGE, ABILITIES: Mechanic must have knowledge of gas and diesel equipment, transmissions, front ends, brakes, drive line, electrical and charging systems, etc. Shop Foreman must perform work involving welding, brazing, shop presses, air tools, jacks, dollies and automotive equipment and tools. Shop Foreman will be responsible for maintaining parts, preventative maintenance schedules, and required State vehicle inspections. Shop Foreman will also work with the Director of Transportation in setting and maintaining the budget for District and Transportation vehicles. PERFORMANCE RESPONSIBILITIES: Diagnosing and repairing district buses and automotive equipment. Responsible for performing and assisting in the maintenance and repairs of all vehicles. Perform all required inspections of all types of vehicles. Complete and submit all paperwork.

The Aircraft Mechanic 2 (CH-47) Oversees and performs maintenance on helicopters, excluding repair of systems according to drawings, blueprints, directives, technical manuals and safety procedures. May be required to perform any AM1 task. Oversees removal and installation aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, mechanical flight controls and their components. Oversees and services and lubricates aircraft and subsystems. Oversees preparation of aircraft for inspections and maintenance checks. Oversees and performs scheduled inspections and assists in performing special inspections. Oversees and performs limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required. Oversees and use of and performs operator maintenance on tools, special tools and aircraft ground support equipment. Oversees preparation of forms and records related to aircraft maintenance. Oversees, removes and disassembles defective parts of the aircraft. Oversees maintaining the supplies and perform preventive maintenance. Performs additional duties, including maintenance duties, as requested. Adheres to company policies and safety programs (Safety-first mentality) Minimum Requirements High School Diploma or equivalent is required. U.S. military technical school or specialized training course is desired; certification of education level is required. Valid up-to-date A&P license (optional ) Must have three years aviation maintenance experience, three years rotary wing aircraft experience, and two years on the assigned Mission Design Series (MDS). All experience must be within the six most recent years. Valid Driver's License. Must provide own tools/toolbox. Recruiters will provide toolbox requirements to candidates upon selection. Clearance Requirements Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility. Knowledge & Skills Thorough knowledge of aircraft systems on the assigned MDS. Advanced knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, hydraulic press machine, and those listed in the assigned MDS Maintenance Allocation Chart (MAC). Advanced knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects Possess the level of experience to inspect all required aeronautical type maintenance to be performed by aircraft mechanic. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift/push/pull heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test qualification. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. May be expected to work in austere environments and all-weather conditions. Compensation Details: $40.18CBA Hourly Pay Rate plus $5.10 H&W The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. Benefits Overview: Our health and welfare benefits are designed to support you and your priorities. Offerings include: Health, dental, and vision insurance Paid time off and holidays Retirement benefits (including 401(k) matching) Educational reimbursement Parental leave Employee stock purchase plan Tax-saving options Disability and life insurance Pet insurance Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. Original Posting: 01/12/2026 - Until Filled Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Alutiiq Operations Services, LLC has an exciting opportunity for a Fire Suppression System Mechanic supporting Tinker Air Force Base located in Oklahoma City, OK. The Fire Suppression System Mechanic performs the fire suppression duties necessary to maintain all buildings and structures in good repair. Keeps supervisor apprised of unique situations and problems encountered and identify and reports safety, environmental and other work requirements for resolution. * Installs, maintains, and repairs installed fire suppression systems in accordance with manufacturer's specifications and National Fire Protection Association standards. * Checks pressure gauges on suppression system storage containers and recharges or replaces containers. * Performs visual inspections and testing on fire suppression equipment, to include fire pumps and replaces defective components. * Visually inspects kitchen hood equipment and replaces defective components. * Works with other Mechanics to share specialized skills and experience related to fire systems maintenance and repair. * Respond to emergency site maintenance as required * Work involves planning and layout of work from blueprints, drawings, models, or verbal instructions. * Utilizes and interprets technical manuals, shop directives, blueprints, sketches, diagrams, and specifications, verbal and written instructions. * Responsible for completing daily work order log documenting inspections, maintenance and repair information, to include work performed, materials used and hours worked on each assigned work order. * Interfaces with customers and responsible for customer feedback, as applicable. * Operates motor vehicles in accordance with company vehicle policies. * Complies with applicable federal, state, United States Air Force (USAF) and Occupational Safety & Health Administration (OSHA) environmental laws and regulations. * Complies with health and safety rules and procedures; performs work in a manner that enhances the safety of the work environment. * Incumbent will at all times wear appropriate Personal Protective Equipment (PPE) as determined by position and duties. * Performs other related duties as assigned. * Accurate, timely, and cost-effective performance of duties. * Working harmoniously with customers and fellow co-workers. * Maintaining strict confidentiality of all Alutiiq LLC related matters. * Accountable for assigned tools, materials and equipment. * Cleanliness and safety of shop and work areas. * Maintain a safe and healthy work environment within the shops and company vehicles. * Utilizes experience to identify needed materials and required man hours to accomplish work. Material will need to be identified accurately enough so that either the Supervisor or clerk can order it. Additionally, required to check both Store Stock and Residue for material that can be utilized. * Estimated work hours need to be close enough so supervision can determine needed crew size and method of accomplishment and proper scheduling. This includes the need to schedule utility outages. REQUIRED QUALIFICATIONS AND EXPERIENCE: * High School diploma or equivalency. * Current state driver's license, acceptable driving record, and proof of valid insurance. * Minimum Five (5) years' experience in repairing and testing of suppression systems. * Valid Sprinkler Technician License with the ability to obtain an Oklahoma Sprinkler Technician License within 90 days of employment. * Ability to obtain Oklahoma Fire Extinguisher License. * Must be knowledgeable in addressable and conventional alarm panels. * Must be knowledgeable in water mist special hazard systems. * Must be knowledgeable in CO2 special hazard systems. * Must be knowledgeable in testing backflow devices. * Must be knowledgeable in testing of fire pumps. * Must be knowledgeable in operating boom and/or scissor lifts. * Ability to obtain and maintain all necessary licenses/IDs/certifications. * Ability to solve problems and work independently with minimal supervision. * Familiarity with facility/infrastructure codes and standards, as applicable. * Ability to adapt to changes in technology and applicable facility/infrastructure codes and standards. * Proficiency and knowledge of a variety of hand and power tools. * Demonstrated working ability read, write, speak and understand English. Preferred Qualifications and Experience: * Seven (7+) years in repairing and testing of suppression systems. * Basic computer skills and familiarity with Microsoft Office applications. * Military experience. * Previous experience working on a military installation. * Experience working on Tinker facilities. * Basic computer skills (Excel, Word, etc.) * Familiarity with military-specific facility/infrastructure codes and standards, as applicable. Afognak Native Corporation and Afognak's direct and indirect subsidiaries, partnerships, joint ventures and affiliates to include Alutiiq, LLC; Afognak Commercial Group, LLC; Alutiiq Professional Consulting, LLC; and each of their respective domestic and foreign, direct and indirect subsidiaries, partnerships, joint ventures and affiliates are equal opportunity employers that do not discriminate on the basis of actual or perceived race, color, religion, national origin, citizenship status, age, sex (including pregnancy, childbirth, related medical conditions and lactation), sexual orientation, protected veteran status, disability, genetic information, or any other characteristic protected by applicable federal, state or local laws (collectively, "Protected Status"). The pay range information provided is a general guideline. The pay rate offered will be determined based on the candidate's experience and qualifications, as well as geographic locations, market data, and other business considerations, as permitted by law. Our full range of benefits include medical, dental, vision, disability protection, life insurance, prescription coverage, voluntary benefits, paid leave, and 401(k) retirement. Positions covered by the McNamara O'Hara Service Contract Act (SCA), Davis-Bacon Act (DBA), or a Collective Bargaining Agreement (CBA), or Fair Labor Standards Act (FLSA) will comply with the statute or CBA requirements as well as other client-customer contract requirements (all benefits are subject to eligibility requirements). For more information, please visit our Company's Career page.

In a team-oriented work environment, under moderate supervision, performs a variety of structural assembly operations in a production department. Principle Duties and Responsibilities: Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensure parts/assembly meet FAA requirements, customer specifications, and Company standard of quality Rivet structural assemblies and parts, including Sheetmetal parts, using all tools required to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets) Read work orders, blueprints, lofts, sketches, and operation sheets to determine the sequence of operations, type size, and hole pattern for rivets. Check all work and ensure a defective-free assembly prior to the final inspection Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs). Use a resource planning system to enter daily labor against correct Work Order and Item numbers Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners Maintain a neat and orderly work area, support the company 5S Program, and comply with all safety regulations Work under moderate supervision on duties and tasks Support Lean Activities Additional Functions Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) Keep shop and aircraft work areas clean and uncluttered Properly care for and maintain shop equipment and tools as assigned by the Supervisor Comply with safety rules and procedures Perform other duties as assigned. Job Requirements: High School Diploma or GED required. 1 year related structural assembly experience. Experience working with Solumina and Smarteam preferred. One year experience credit considered for graduates of Savannah Tech Aircraft Structures Technical Certificate Program. Other Requirements: Basic knowledge of various aircraft structures, Sheetmetal, and fabrication processes Ability to read and interpret basic blueprints Read and interpret the 6" scale Basic computer skills Must be able to read a scale and perform basic shop math Read and comprehend basic documents and instructions Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules Must demonstrate good housekeeping and safety practices Ability to work with composite resins and materials Must be able to lift 50 lbs. Must be able to work any shift Must be able to climb ladders/stands/stairs and work in small spaces and/or restricted areas Must be able to read, write, speak, and understand English language

JOB TITLE: Aircraft Structural Mechanic II PAY RATE: $25.65/hour We are a naional aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Performs a variety of structural assembly tasks in a production setting. All work must be completed in accordance with company design specifications and quality standards to ensure customer satisfaction. Assemble and fit detail parts and structures, perform drilling and riveting operations to meet FAA requirements, customer specifications, and quality standards. Rivet structural assemblies and sheet metal parts using appropriate tools (e.g., riveting guns, pneumatic drills, countersinks, rivet shavers, reamers). Interpret work orders, blueprints, lofts, sketches, and operation sheets to determine work sequence, rivet type, size, and hole patterns. Inspect own work to ensure defect-free assembly prior to final inspection. Maintain and complete required documentation (e.g., MIR sheets, DMTs, Crabs, PCOs) and enter daily labor in the resource planning system. Align and assemble parts using jigs, clamps, pins, and fasteners. Maintain a clean and organized work area; support 5S initiatives and follow all safety regulations. Work under moderate supervision. Support Lean and continuous improvement activities. Participate in improvement initiatives (e.g., YIAW, Kaizen events). Maintain shop and aircraft work areas to company standards. Properly use and care for assigned tools and equipment. Comply with all safety policies and procedures. Perform other duties as assigned. Requirements: High School Diploma or GED required. Two (2) years of related structural assembly experience. Experience with Solumina and Smarteam preferred. Basic knowledge of aircraft structures, sheet metal, and fabrication processes. Ability to read and interpret blueprints and a 6" scale. Basic math and computer skills required. Strong attention to detail, professionalism, and the ability to meet deadlines. Demonstrates good housekeeping and safety practices. Ability to work with composite resins and materials. Must be able to lift up to 50 lbs. Must be able to work any shift. Must be able to climb ladders, stairs, and stands, and work in confined or restricted areas. Must be able to read, write, speak, and understand English. Must be a U.S. Person (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today!

Global Channel Management is a technology company that specializes in various types of recruiting and staff augmentation. Our account managers and recruiters have over a decade of experience in various verticals. GCM understands the challenges companies face when it comes to the skills and experience needed to fill the void of the day to day function. Organizations need to reduce training and labor costs but at same requiring the best "talent " for the job. Qualifications Technical assistant needed for airline industry. Technical assistant requires: Extensive knowledge of Engine and Component Maintenance Manuals and their structure as defined by Technical Publications and the AA CRM/ESO process a plus. Strong analytical ability. Attention to detail a must. Excellent oral and written communication skills. Solid organizational skills vital. Self-motivated, sound judgment and decision making ability. Ability to read, write and fluently speak and understand the English language. Working knowledge of software applications used in document authoring and other departmental processes (e.g. SQL, Adobe Acrobat Pro, SGML, XML, MS Word, Excel, FileMaker Pro, Access, SharePoint, Teradata etc.). Technical assistant for airline industry pays $20/hr Additional Information $120/HR 6 months+

Aircraft Maintenance Technician (AMT) IMMEDIATELY HIRING! A&P Mechanic - Rotor Wing FULL-TIME Opportunity in Tahlequah, OK * Starting Salary: $72,914 - $106,348 (including 14% geo modifier) * IA Stipend 2,080 * Sign-On Bonus 12,500 We're hiring an Aircraft Maintenance Technician (AMT) responsible for the overall maintenance and safety of our fleet within Med-Trans. This technician will be qualified to support our Bell 407 airframe. This is a key role to ensure our team can safely maintain and deliver timely and high-quality transportation services, care and customer service to patients. Responsibilities * Aircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. * Manage inventory checks to ensure stock of supplies and equipment, regularly update the equipment tracking log, place replacement requests when necessary and document part expenditures. * Clearly document service paperwork and FAA information as required and adhere to policies and procedures while complying with the company's information security standards. * Take pride in sustaining a safe and clean working environment for the aircraft maintenance team and flight crew. * Use appropriate communication methods to help facilitate coordination of efforts between departments, vendors and team members. * Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow AMTs and operations team. Minimum Required Qualifications * Bell 407 Maintenance experience * Three (3) years of turbine helicopter maintenance experience with a minimum of six months helicopter maintenance experience during the last 24 months * Valid Airframe and Powerplant (A&P) license * Valid State issued Driver's license * High School diploma or GED equivalent * Federal Aviation Regulations knowledge * EMS systems, Aircraft maintenance systems, records and maintenance support and planning * Ability to work a flexible schedule including overtime and 24/7 on-call rotations. * Must be acceptable in accordance with the FAA drug and alcohol testing program. * Must be able to push and/or pull 100+ lbs. * Must be able to lift and/or carry up to 50 lbs. Preferred Qualifications * FAA Inspection Authorization Certification * Related experience under CFR Part 135 * Autopilot maintenance experience * Avionics and electrical repair experience Why Choose Med-Trans: As a national leader in air ambulance, Med-Trans is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. Check out our careers site benefits page to learn more about our benefit options. R0047098