Aircraft mechanic jobs in Pensacola, FL - 38 jobs

Job Title: Aircraft Mechanic (A&P Certificated) This position reports directly to the Lead Mechanic and is responsible for performing aircraft maintenance and repairs as assigned. Skills & Responsibilities: Must have an A&P Certificate Strong attention to detail Reports to assigned Lead Mechanic Performs maintenance and repairs in accordance with prescribed practices and procedures Completes paperwork as directed Keeps the shop work area clean and organized as directed. Fleet includes: 8 x Cessna 172's, 2 x Piper Singles (Warrior & Arrow), 2 x Piper Twins (Aztec & Apache), 1 x Cessna 421, 2 x Robinson Helicopters (R-22 & R-66) Contributes to a safe work environment by reporting workplace hazards Ensures compliance with all 14 CFR part 91/141 regulations Experience requirements: Must be able to read, write, understand, and speak English Previous Robinson Helicopter maintenance experience (R-66 preferred) Must have knowledge of Federal Aviation Regulations Ability to work in confined spaces Ability to stand for long periods of time Ability to lift up to 75 lbs., climb ladders, and maneuver around aircraft Must be able to pass a company background and drug test Work Environment: Flight line and hangar at times in inclement weather Work around chemicals, solvents, and paints EEO Statement: Vali, Inc. is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Makes repairs and adjustments to aircraft on the flight line and in the field. Perform parts replacement to assist in troubleshooting of systems to isolate and correct discrepancies. Requires knowledge of systems and applicable manuals and instructions in type aircraft. Provides guidance and assistance in resolving / repairing discrepancies discovered by Plane Captains during required inspections. Participates in flight operations as an In-Flight Maintenance Observer once qualified and as directed by supervisory personnel. May assist the Functional Check Pilots in preflight and post flight inspections of aircraft. May be required to use hazardous materials in performance of assigned duties. Knowledge of COMNAVAIRFORINST 4790.2 Series and other applicable Navy Instructions, Manufacturer Manuals and Company Instructions. Must have a good working knowledge of type aircraft maintenance and be able to demonstrate maintenance skills and knowledge of aircraft systems. Must be able to read, speak, write legibly and understand the English language. Must pass FM flight physical as required. Must be qualified and certified as a Plane Captain or become qualified and certified within 120 days after assuming the position. Must have experience in corrosion detection, treatment and prevention. Perform corrosion control cleaning and removal as required utilizing precautions in the SDS for materials utilized to complete these tasks. JOB DUTIES: Responsibilities may include, but are not limited to: Performs high power ground turn operational checks following maintenance or engine rinses in accordance with applicable maintenance instructions. Perform Daily and Turnaround Inspections in accordance with inspection criteria on aircraft assigned for Maintenance Turns or Functional Check Flights. Accompany Functional Check Pilots and serve as In-Flight Maintenance Observer during functional check flights, ACI or Depot ferries, and aircraft recovery missions. May be required to perform component changes, inspection and repairs on downed aircraft here or away from NAS Whiting Field. Provide guidance to lower-level mechanics by sharing technical knowledge to enhance accomplishment of assigned tasks. Use measuring equipment and other test equipment to troubleshoot, adjust, or install aircraft or engine accessories. Monitor progress of work being performed on assigned aircraft. Coordinate with supervision and Quality Assurance to resolve questions concerning serviceability and/or repair procedures. Responsible for adhering to the Tool Control Program. Maintain cleanliness of the work center and assigned work area Responsible for adhering to all applicable Foreign Object Damage (FOD) prevention rules and regulations. Must comply with established General and Industrial Safety Rules and Regulations as applicable to the contract, facilities and job assignment. Required to perform Collateral Duty Inspector functions. Document work accomplished on government and company electronic and/or manual Information Systems. Must possess personal tools required to perform the work in the classification. May be required to remove and reinstall cowlings, doors and panels to perform the duties of the job classification. Pursuant to the specific provisions of the CBA, at the discretion of management, may be requested to perform the duties of Lead. Monitor and assist the line move crew when operating inside the hangar. Assist in ensuring the safety, security, inventory and preservation of Government owned and Company owned equipment. Perform other related duties within the job classification. May be required to perform CDQAR functions when qualified and certified. Working Environment: The diversity of work conditions may range from an environment where there is little or no physical discomfort, to an environment which is typical of an office setting. May be required to work in areas where high noise hazards prevail. May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards. Physical Activities: This classification involves aircraft operations in-flight in varying conditions of weather and natural daylight. Activity is usually accomplished in a cockpit environment and as such requires the scope of physical movements and postures normally associated with flight activities. Climbing, standing, stooping, bending, pushing, kneeling, stretching, extensive walking and working in tiring uncomfortable positions. May require lifting of objects whose weight normally will not exceed 50 pounds. QUALIFICATIONS: Education / Certifications FAA Airframes & Power Plants License (A&P) required. Initial and Annual Flight Physicals. Aviation Physiology Training (formal schooling required) CDQAR/CDI (formal schooling required) A/C Plane Captain Certification Flight Control Rigging Certification Aircraft Tum-up Certification Hydraulic Fluid Sampling Certification Aircraft Towing Certification GSE Licensing (formal schooling required) Airfield Operators License Valid State Operators License Must be able to obtain and maintain a DoD security clearance. Must have excellent written and verbal communication skills Experience FAA Airframes & Power Plants License (A&P) required. Must have a minimum of seven (7) years of documented experience as a practicing aircraft mechanic (either fixed wing or helicopter), three (3) years of which must have been on AW119/TH-73 or rotary aircraft. Must pass Flight Physical prior to assuming this position. During the first 30 days after assuming this position, must pass Aviation Physiology Training. Must meet any other qualification standards imposed by the government contract not covered by this agreement. Benefits Include the Following: Healthcare coverage Retirement Plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

Job Title: Aircraft Mechanic (A&P Certificated) This position reports directly to the Lead Mechanic and is responsible for performing aircraft maintenance and repairs as assigned. Skills & Responsibilities: * Must have an A&P Certificate * Strong attention to detail * Reports to assigned Lead Mechanic * Performs maintenance and repairs in accordance with prescribed practices and procedures * Completes paperwork as directed * Keeps the shop work area clean and organized as directed. * Fleet includes: 8 x Cessna 172's, 2 x Piper Singles (Warrior & Arrow), 2 x Piper Twins (Aztec & Apache), 1 x Cessna 421, 2 x Robinson Helicopters (R-22 & R-66) * Contributes to a safe work environment by reporting workplace hazards * Ensures compliance with all 14 CFR part 91/141 regulations Experience requirements: * Must be able to read, write, understand, and speak English * Previous Robinson Helicopter maintenance experience (R-66 preferred) * Must have knowledge of Federal Aviation Regulations * Ability to work in confined spaces * Ability to stand for long periods of time * Ability to lift up to 75 lbs., climb ladders, and maneuver around aircraft * Must be able to pass a company background and drug test Work Environment: * Flight line and hangar at times in inclement weather * Work around chemicals, solvents, and paints EEO Statement: Vali, Inc. is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Makes repairs and adjustments to aircraft on the flight line and in the field. Perform parts replacement to assist in troubleshooting of systems to isolate and correct discrepancies. Requires knowledge of systems and applicable manuals and instructions in type aircraft. Provides guidance and assistance in resolving / repairing discrepancies discovered by Plane Captains during required inspections. Participates in flight operations as an In-Flight Maintenance Observer once qualified and as directed by supervisory personnel. May assist the Functional Check Pilots in preflight and post flight inspections of aircraft. May be required to use hazardous materials in performance of assigned duties. Knowledge of COMNAVAIRFORINST 4790.2 Series and other applicable Navy Instructions, Manufacturer Manuals and Company Instructions. Must have a good working knowledge of type aircraft maintenance and be able to demonstrate maintenance skills and knowledge of aircraft systems. Must be able to read, speak, write legibly and understand the English language. Must pass FM flight physical as required. Must be qualified and certified as a Plane Captain or become qualified and certified within 120 days after assuming the position. Must have experience in corrosion detection, treatment and prevention. Perform corrosion control cleaning and removal as required utilizing precautions in the SDS for materials utilized to complete these tasks. **JOB DUTIES:** Responsibilities may include, but are not limited to: + Performs high power ground turn operational checks following maintenance or engine rinses in accordance with applicable maintenance instructions. + Perform Daily and Turnaround Inspections in accordance with inspection criteria on aircraft assigned for Maintenance Turns or Functional Check Flights. + Accompany Functional Check Pilots and serve as In-Flight Maintenance Observer during functional check flights, ACI or Depot ferries, and aircraft recovery missions. + May be required to perform component changes, inspection and repairs on downed aircraft here or away from NAS Whiting Field. + Provide guidance to lower-level mechanics by sharing technical knowledge to enhance accomplishment of assigned tasks. + Use measuring equipment and other test equipment to troubleshoot, adjust, or install aircraft or engine accessories. + Monitor progress of work being performed on assigned aircraft. + Coordinate with supervision and Quality Assurance to resolve questions concerning serviceability and/or repair procedures. + Responsible for adhering to the Tool Control Program. + Maintain cleanliness of the work center and assigned work area + Responsible for adhering to all applicable Foreign Object Damage (FOD) prevention rules and regulations. + Must comply with established General and Industrial Safety Rules and Regulations as applicable to the contract, facilities and job assignment. + Required to perform Collateral Duty Inspector functions. + Document work accomplished on government and company electronic and/or manual Information Systems. + Must possess personal tools required to perform the work in the classification. + May be required to remove and reinstall cowlings, doors and panels to perform the duties of the job classification. + Pursuant to the specific provisions of the CBA, at the discretion of management, may be requested to perform the duties of Lead. + Monitor and assist the line move crew when operating inside the hangar. + Assist in ensuring the safety, security, inventory and preservation of Government owned and Company owned equipment. + Perform other related duties within the job classification. + May be required to perform CDQAR functions when qualified and certified. **Working Environment:** The diversity of work conditions may range from an environment where there is little or no physical discomfort, to an environment which is typical of an office setting. May be required to work in areas where high noise hazards prevail. May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards. **Physical Activities:** This classification involves aircraft operations in-flight in varying conditions of weather and natural daylight. Activity is usually accomplished in a cockpit environment and as such requires the scope of physical movements and postures normally associated with flight activities. Climbing, standing, stooping, bending, pushing, kneeling, stretching, extensive walking and working in tiring uncomfortable positions. May require lifting of objects whose weight normally will not exceed 50 pounds. **QUALIFICATIONS:** + **Education / Certifications** + FAA Airframes & Power Plants License (A&P) required. + Initial and Annual Flight Physicals. + Aviation Physiology Training (formal schooling required) + CDQAR/CDI (formal schooling required) + A/C Plane Captain Certification Flight + Control Rigging Certification Aircraft + Tum-up Certification + Hydraulic Fluid Sampling Certification Aircraft + Towing Certification + GSE Licensing (formal schooling required) + Airfield Operators License Valid State + Operators License + Must be able to obtain and maintain a DoD security clearance. + Must have excellent written and verbal communication skills + **Experience** + FAA Airframes & Power Plants License (A&P) required. + Must have a minimum of seven (7) years of documented experience as a practicing aircraft mechanic (either fixed wing or helicopter), three (3) years of which must have been on AW119/TH-73 or rotary aircraft. + Must pass Flight Physical prior to assuming this position. + During the first 30 days after assuming this position, must pass Aviation Physiology Training. + Must meet any other qualification standards imposed by the government contract not covered by this agreement. **Benefits Include the Following:** + Healthcare coverage + Retirement Plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources _Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans._ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

The **Aircraft Mechanic I** performs aircraft maintenance to include inspection, operational test, repair, modification and replacement of aircraft systems and components. Must possess a high degree of expertise in aircraft systems, applicable maintenance and technical manuals and publications, basic and special tools, and test equipment. Must have a working knowledge of ground support equipment and corrosion detection, prevention, and treatment. Essential Responsibilities: + Inspects and certifies aircraft at specific intervals as required by OEM and FAA. + Troubleshoots system malfunctions, performs necessary corrective actions. + Documents maintenance of aircraft on appropriate forms. + Removes and replaces defective components. + Complies with service bulletins, instructions and airworthiness directives as directed. + Performs preflight/post flight turn around and daily inspections and servicing when required. + Research aircraft logbooks and historical data as required. + Complies with safety, foreign object damage, egress familiarization, and tool control program requirements. + Serves as a point of contact with the Quality Assurance Representative. + Advises management of problems that may delay scheduled delivery of aircraft to customer. 11) Ensures materials issued for assigned tasks are the correct items to repair the problem. + Provides on-the-job training to new employees as required. + Assists with supervision and inspects maintenance performed by FAA certified and non-certified personnel. + Services oxygen, nitrogen, tires, oil and hydraulic systems. + Performs corrosion control checks when required. + Exhibits positive courteous behavior with customers businesses and coworkers. + Assists coworkers and those in other departments to successfully perform job tasks and functions when necessary. + Follows all safety procedures and practices as established by the Company and regulatory bodies. + Complies with all established general and industrial safety rules and regulations as applicable to the contract, facility, and job assignment. + Ensures safety, security and preservation of government and company owned equipment. + Deals with the customer in courteous, professional and effective manner. + Performs other related duties as assigned by management. + Maintains the cleanliness of the work center. + Assist is aircraft inventory, acceptance, and transfer inspections. + Turn-up and taxi qualified as required. + Perform all other position related duties as assigned or requested. Minimum Position Knowledge, Skills, and Abilities Required: + Must have high school diploma or equivalent + Must have a minimum of five (5) years' experience as an aircraft mechanic. + Must be familiar with aircraft systems, tools, drawings, schematics, and normal safety requirements. Must have experience in corrosion detection, treatment, and prevention. + Satisfactory completion of U.S. Armed Forces aircraft mechanic courses and / or five (5) years' experience as an aircraft mechanic or ten (10) years recent aircraft maintenance on similar type aircraft. + Must be able to meet any Government / Company licensing / qualification requirements for the position. + Must have a valid driver's license. + Possess a high degree of expertise of aircraft systems, applicable maintenance / technical manuals and publications, basic tools, special tools, and test equipment. + Must have a working knowledge of ground support equipment and corrosion detection, prevention, and treatment. + FAA or A&P license preferred. + Must be able to work all assigned shifts & schedules. Work Environment, Physical Demands, and Mental Demands: + The diversity of working conditions may range from standard shop type environment where + there is no physical discomfort, to an environment where inclement weather may subject + individual to severe changes in temperature, wind, rain, etc. + May be required to work where high noise hazards prevail. Will be required to wear protective clothing and other safety equipment. + Will be required to work with hazardous materials. Occasional (5%) for rescue or detachment **About Amentum** Amentum is a global leader in advanced engineering and innovative technology solutions, trusted by the United States and its allies to address their most significant and complex challenges in science, security, and sustainability. Our people apply undaunted curiosity, relentless ambition, and boundless imagination to challenge convention and drive progress. Our commitments are underpinned by the belief that safety, collaboration, and well-being are integral to success. Headquartered in Chantilly, Virginia, we have approximately 50,000 employees in more than 70 countries across all 7 continents. **Compensation Details:** N/A The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. **Benefits Overview:** Our health and welfare benefits are designed to support you and your priorities. Offerings include: + Health, dental, and vision insurance + Paid time off and holidays + Retirement benefits (including 401(k) matching) + Educational reimbursement + Parental leave + Employee stock purchase plan + Tax-saving options + Disability and life insurance + Pet insurance _Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits._ **Original Posting:** Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. * Inspecting and repairing ground support equipment * Installing and removing Quick Engine Change (QEC) kits on aircraft engines * Dealing with Coworkers/Clients/public JOB DUTIES: Responsibilities may include, but are not limited to: * Performing engine QEC buildup actions, both assembly and tear down. * Uses automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems * Inspects, tests, and operates GSE to determine equipment serviceability and proper operation * Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and components * Removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories * Stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses * Disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations * Operates, cleans, inspects, and services GSE towing vehicles; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations. * Practices good housekeeping, tool control, Foreign Object Damage prevention and safety at all times. * Additional responsibilities include working with a variety of repair and test equipment including welders, torches, pressure testers and electrical testers to name a few. * Completing all required documentation and tagging requirements of QEC items. * Order QEC parts from COMBS. * Refer to technical publications to determine specifications to be met. * Track and record calibration dates to insure that support equipment is up to date. * Keep files with documentation and certifications of calibrated equipment. * Ensure that equipment is sent out for calibration when due. * Ensure that all equipment is accounted for. * Assign I.D. numbers to each piece of equipment. * When turning over equipment to the operating command make certain to have them sign a receipt for all equipment to keep on file in COMBS. * Each LD. number must have a file of record. * Performs maintenance and inspections on (GSE) according to applicable maintenance manuals, manufacturer specifications and FAA regulations. * Research and order materials for repair of support equipment. * Performs engine QEC build-up actions, i.e. assembly and teardown. * Cleaning of warehouse, shops, offices and restrooms as required. * Clerical and other assigned duties as required. * Prepares GSE for storage and transportation * Other Duties as assigned * Abide by all Company policies and procedures not otherwise noted above. QUALIFICATIONS: * Knowledge, Skills, and Abilities (Required Skills include the ability to:) * Understanding of scheduling techniques and technical order requirements. * Ability to accurately troubleshoot and repair complex aircraft engine/support equipment systems. * Mental and visual ability to read and understand detailed technical publications and instructions. * Ability to communicate effectively, both orally and in writing. * Ability to deal courteously with the customer. * Knowledge of generally accepted accounting principles sufficient to perform the job, duties, and tasks associated with the position. * Knowledge of contractual requirements. * Extensive working knowledge in logistics and data information systems. * Education and Experience: * Graduation from a standard four (4) year high school or equivalent (GED). * Thirty-six (36) months in one or more of the maintenance trades or the * Minimum three (3) years recent aircraft maintenance experience * Valid FAA Airframe and Power plant Certificate Benefits include the following: * Healthcare coverage * Retirement Plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays * Learning and Development resources * Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

GENERAL DESCRIPTION Aircraft Mechanics II must have a combination of experience to repair Fuel systems, engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. DUTIES Maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, shall occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. Provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). May require specialization in sheet metal, electric work, avionics or other aircraft systems related disciplines May require the use of HVLP spray gun and various other corrosion control tooling. Work will be accomplished on and off aircraft depending on specific requirements. Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS High school diploma or equivalent is required Must have a minimum of two (2) years of experience on the C-130H/J variant aircraft May be required to be licensed by Federal Aviation Administration CPR Qualified is a preference Trained on the proper use, inspection, and wear of personal protective clothing and equipment is required Trained on the use of communication equipment is preferred Familiarity with recognizing symptoms of overexposure to chemicals, solvents, and fuels Must be a U.S. Citizen We maintain a drug-free workplace and perform post offer, pre-employment and random substance abuse testing. PHYSICAL REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands, working at heights with fall protection devices. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift up to 50 pounds and carry for short distances. May be required to read dials/gauges, identify small objects and hand tools. Must be able to see imperfections, micrometer readings and other small scales. Must be able to communicate by voice and detect sound by ear. Must be able to distinguish color and judge three-dimensional depth. May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc. Expected to work in high heat or extreme cold temperatures for extended periods of time. May operate in austere COUNS and OCOUNS locations. Ability to wear a full face or forced air respirator. Ability to work in confined spaces EQUAL OPPORTUNITY EMPLOYER/VEVRAA/ADA TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Employment Opportunity Employer and a VEVRAA governed Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities. TNC provides all employees and job applicants equal employment opportunities in hiring and promotion without regard to age, sex, sexual orientation, marital status, race, religion, color, veteran status, genetic information, physical or mental disability, national origin or any other reason prohibited by law. #jsfirm

Who YOU are and what You can become: Are you a hands-on structures mechanic with a sharp eye for precision and a drive to tackle complex airframe challenges? Join our team and bring your expertise to large-scale structural repairs, intricate skin work, and critical disassembly tasks on commercial aircraft. You'll work in a high-paced, safety-first environment where your skills shape the integrity and airworthiness of every plane we touch. If you're ready to grow your craft, mentor others, and make a measurable impact, we want to hear from you! Who WE are and where WE are going: ST Engineering Aerospace is located in Pensacola, FL, at the Pensacola International Airport. We are a renowned provider of aircraft maintenance and modification (AMM) services for commercial airlines and air freight operators. We meet our customers' requirements by providing a full spectrum of high-quality, reliable, and timely AMM and engineering solutions. We have the know-how and experience to comprehensively manage complex projects, ensuring our customers' aircraft operate safely and efficiently. What YOU will do: Responsible for Mechanical maintenance and repair on Commercial Aircraft types. In This Role YOU will: * Has obtained & demonstrated all the skills required of a Sheetmetal Technician * Ability to read, interpret, plan & work from complex SRM's, Reinforcing Repairs / Replacements * Ability to read, interpret, plan & work from complex Blueprints, Service Bulletins, AD's, EO's, and EA's * Ability / willingness to assist, guide, train, oversee & evaluate others * Attentiveness & knowledge of aircraft schedule / assigned job budget * Ability to schedule job tasks & meet completion timelines * Large skin repairs requiring doublers / triplers containing complex contours * Wing spar, keel beam & other repairs / replacements, etc. that require substantial disassembly * Disassembly & Reconstruction of areas per Blue Prints * Accomplishment of Service Bulletins, AD's, EO's, & EA's that affect Primary / PSE JOB SPECIFICATIONS: Proficient working knowledge & ability to perform all requirements of lower Sheet metal Job skill progression titles. Good working knowledge or ability to acquire the skills of a Lead Mechanic. Proficient working knowledge of the following skills and the ability to learn skills among various narrow and wide body commercial aircraft: Proficient detail blueprint reading, ability to read, interpret and work from service bulletins, engineering work orders, major S.R.M. structural repairs, ability to layout work using bend radius, set back and bend allowance charts, utilization of shop math, knowledge of ATA codes, knowledge of all applicable F.A.R.'s and company policies and procedures including job clocking procedures, routine/ non-routine cards, and work sign-off/ sell-off procedures. INTERPERSONAL RELATIONS: A moderate level of interpersonal skills is required to maintain an effective relationship with various departments, co-workers and supervision. PHYSICAL ENVIRONMENT: Requires easy mobility around all sections of the facility and the dexterity to install various electrical, mechanical, plumbing systems. Must possess the ability to distinguish colors to perform work adequately. Must be able to lift 50 lbs. and report to work regularly. What YOU must bring to Succeed: 8 Months commercial or military structures mechanic experience YOU get more than Just compensation with US: As part of the ST Engineering family, you will be treated like family. We offer a great range of benefits that our employees value and help make ST Engineering the best place to learn and work. Our benefits reflect our commitment to attract, engage and retain the most talented people and offer a diverse selection of benefits to suit you and your family. Some of the benefits we offer are listed below: * Medical Benefits * Vision Insurance * Dental Insurance * 401k with Employer match * PTO * Company provided uniforms * 6 Nationally recognized holidays * Short Term and Long Term Disability Insurance * Life Insurance * Company sponsored events throughout the year Background and Drug Screening Requirements- As part of our commitment to maintaining a safe and secure workplace, successful completion of a background check and drug screening is a mandatory condition for employment. All offers of employment are contingent upon satisfactory results from these screenings. Equal Opportunity - It takes diverse talent to solve real-world problems. ST Engineering is committed to building a workplace community where inclusion is valued, and everyone feels welcomed. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex (including pregnancy), sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. So, bring us your personal experience, your perspectives, and your background. It's through our differences that innovative changes are made. Reasonable Accommodations - ST Engineering is committed to providing reasonable accommodations to qualified individuals with disabilities in the employment application process. To request an accommodation, please contact our Talent Strategies team at **************, or by email at ***********************. Nearest Major Market: Pensacola Apply now "

TEL Staffing is hiring an A&P Mechanic with Inspection Authorization in Gulf Shores, AL. Great opportunity with flexible scheduling, great team environment and overall awesome opportunity. Certification is REQUIRED! This Certification allows aviation mechanics to perform specific inspections on aircraft and approve them to return to service. Principle Duties and Responsibilities: Perform inspection duties utilizing engineering drawings and orders, route cards, inspection travelers, work instructions, technical specifications, QA procedures and instructions, and other related documents. Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD and verify paperwork. Witness, verify and document specified manufacturing process steps. Perform conformity/first article inspections to ensure compliance with FAA approved procedures. Ensure the proper use and storage of area tools and equipment. Conduct work in a manner that enhances own/other employees health and safety, product safety and promotes risk reduction; participate openly in safety-related event investigations, and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level. Additional Functions: Provide technical support to manufacturing personnel. Perform area inspections to ensure compliance with applicable standards and specifications. Participate in continuous improvement activities. Perform other duties as assigned. Job Requirements: Working knowledge of shop mathematics, and CATIA or blueprint reading and interpretation. Competent in the use of basic shop tools and equipment. High School Diploma or GED required.

Let your career take off with PSA Airlines About PSA PSA Airlines, a wholly owned subsidiary of American Airlines, offers unparalleled opportunities for growth and professional development. We value teamwork, diversity, and inclusivity and strive to create a safe, respectful, and happy work environment for our more than 4,000 employees. Our company culture, known as The PSA Way, is our foundation for operation and fosters stability, growth and a focus on the future while always placing safety at the forefront of everything we do. We are driven in our goals and achievements, eager to be better. We are reliable to one another and accountable for our actions. And we are caring in our daily interactions, with teammates, colleagues, and customers. Join our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. Benefits PSA offers the benefits you expect from a company focused on excellence. All eligible team members enjoy a comprehensive benefits package, including: Travel privileges on the American Airlines global network A generous vacation plan designed to let you enjoy your travel perks 401(k) with company match American Airlines Group (AAG) profit-sharing and bonus opportunities A choice of three health plan options, all with nationwide coverage with the UnitedHealthcare Choice Plus network Premium dental coverage Vision plan options provided, including a plan that covers both glasses and contacts every year Benefits navigation services, including finding a doctor, scheduling an appointment, understanding your medical bills, and free second opinion services Access to 24-hour virtual urgent care services Family planning and fertility treatment LGBTQ+ friendly services including gender affirming care, assistance finding knowledgeable providers, and family planning Company-paid Life and AD&D Insurance, Short-term and Long-term Disability, and supplemental life insurance options for spouses and dependent children Flexible Spending Accounts for both Health Care and Dependent Care services Comprehensive Employee Assistance Program providing a range of services, including 5 free in-person sessions with a health care professional Responsibilities Position Summary As the Airframe and Powerplant (A&P) Technician, you will impact PSA Airlines' business growth by conducting aviation repairs and services that allow for operations to be on time. By executing maintenance procedures in compliance with Federal Aviation Regulations and company standards, you are ensuring safe and reliable flights. Job Responsibilities Will perform tasks necessary to comply with Federal Aviation Regulations and accept the responsibility for work performed by themselves and/or in conjunction with others and sign for same on the Company's approved forms. Keep work areas clean. Return all equipment and tools to assigned areas. A&P Technicians will report all inoperative or faulty equipment to the Maintenance Supervisor or Lead Mechanic in charge. Work will consist of and include any and all phases of repair and maintenance of aircraft with the aid of the employee's own tools, specialty tools provided by the Company, the use of test equipment, and Company-supplied technical manuals. In certain cases, and A&P Technician may be authorized to perform required inspection items and assist in Company training programs. Will at the commencement of each repair or inspection initiate the proper documentation. Parts tags will include a complete description of the discrepancy on all removed parts. Determine if the work to be performed is a Required Inspection Item. Verifying, through proper documentation, that any part installed on any aircraft or component is approved for that aircraft or component and has been visually inspected and is free of damage or contamination. Assure that hangar workshops and other areas assigned are maintained in an orderly manner. Responsible for the Company's Security and Safety Management System (SMS) and associated Safety Risk Management and Safety Assurance outputs. Perform other duties as assigned by the Maintenance Supervisor through the Lead Mechanic. Position Specifics Qualifications Current FAA Airframe and Powerplant certification. High school diploma or equivalent. Valid, state-issued Driver's License. Capable of using respirators and other personal protective equipment including eye and hearing protection. Must possess or have ability to obtain a U.S. Passport or equivalent within 90 days of starting position. Must be able to speak, read, and write in English. Must be able to demonstrate authorization to work in the U.S. Preferred Previous experience with CRJs. Additional Information Work Environment: This job operates inside a climate controlled building. This role routinely uses standard office equipment such as computers, telephones, photocopiers, facsimile machines and filing cabinets. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms. Security Clearance: All employees are required to pass the fingerprint-based criminal history records check (CHRC) per 49CFR1542.209. AAP/EEO Statement: PSA Airlines is an equal opportunity employer; qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, age, disability, genetic information, protected veteran status or any other characteristic protected by law. Other Duties: Please note this job description is not designated to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

**ESSENTIAL FUNCTIONS:** The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. + Inspecting and repairing ground support equipment + Installing and removing Quick Engine Change (QEC) kits on aircraft engines + Dealing with Coworkers/Clients/public **JOB DUTIES:** Responsibilities may include, but are not limited to: + Performing engine QEC buildup actions, both assembly and tear down. + Uses automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems + Inspects, tests, and operates GSE to determine equipment serviceability and proper operation + Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and components + Removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories + Stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses + Disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations + Operates, cleans, inspects, and services GSE towing vehicles; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations. + Practices good housekeeping, tool control, Foreign Object Damage prevention and safety at all times. + Additional responsibilities include working with a variety of repair and test equipment including welders, torches, pressure testers and electrical testers to name a few. + Completing all required documentation and tagging requirements of QEC items. + Order QEC parts from COMBS. + Refer to technical publications to determine specifications to be met. + Track and record calibration dates to insure that support equipment is up to date. + Keep files with documentation and certifications of calibrated equipment. + Ensure that equipment is sent out for calibration when due. + Ensure that all equipment is accounted for. + Assign I.D. numbers to each piece of equipment. + When turning over equipment to the operating command make certain to have them sign a receipt for all equipment to keep on file in COMBS. + Each LD. number must have a file of record. + Performs maintenance and inspections on (GSE) according to applicable maintenance manuals, manufacturer specifications **and** FAA regulations. + Research and order materials for repair _of_ support equipment. + Performs engine QEC build-up actions, i.e. assembly and teardown. + Cleaning of warehouse, shops, offices and restrooms as required. + Clerical and other assigned duties as required. + Prepares GSE for storage and transportation + Other Duties as assigned + Abide by all Company policies and procedures not otherwise noted above. **QUALIFICATIONS:** + **Knowledge, Skills, and Abilities (Required Skills include the ability to:)** + Understanding of scheduling techniques and technical order requirements. + Ability to accurately troubleshoot and repair complex aircraft engine/support equipment systems. + Mental and visual ability to read and understand detailed technical publications and instructions. + Ability to communicate effectively, both orally and in writing. + Ability to deal courteously with the customer. + Knowledge of generally accepted accounting principles sufficient to perform the job, duties, and tasks associated with the position. + Knowledge of contractual requirements. + Extensive working knowledge in logistics and data information systems. + **Education and Experience:** + Graduation from a standard four (4) year high school or equivalent (GED). + Thirty-six (36) months in one or more of the maintenance trades or the + Minimum three (3) years recent aircraft maintenance experience + Valid FAA Airframe and Power plant Certificate **Benefits include the following:** + Healthcare coverage + Retirement Plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources _Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans._ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Job Description Job Title: Aircraft Mechanic (A&P Certificated) This position reports directly to the Lead Mechanic and is responsible for performing aircraft maintenance and repairs as assigned. Position Skills & Responsibilities: Must have an A&P Certificate Strong attention to detail Reports to assigned Lead Mechanic Performs maintenance and repairs in accordance with prescribed practices and procedures Completes paperwork as directed Keeps the shop work area clean and organized as directed. Fleet includes: 8 x Cessna 172's, 2 x Piper Singles (Warrior & Arrow), 2 x Piper Twins (Aztec & Apache), 1 x Cessna 421, 2 x Robinson Helicopters (R-22 & R-66) Contributes to a safe work environment by reporting workplace hazards Ensures compliance with all 14 CFR part 91/141 regulations Experience requirements: Must be able to read, write, understand, and speak English Previous Robinson Helicopter maintenance experience (R-66 preferred) Must have knowledge of Federal Aviation Regulations Ability to work in confined spaces Ability to stand for long periods of time Ability to lift up to 75 lbs., climb ladders, and maneuver around aircraft Must be able to pass a company background and drug test Work Environment: Flight line and hangar at times in inclement weather Work around chemicals, solvents, and paints EEO Statement: Vali, Inc. is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Job Posted by ApplicantPro

The Aircraft Mechanic I performs aircraft maintenance to include inspection, operational test, repair, modification and replacement of aircraft systems and components. Must possess a high degree of expertise in aircraft systems, applicable maintenance and technical manuals and publications, basic and special tools, and test equipment. Must have a working knowledge of ground support equipment and corrosion detection, prevention, and treatment. Essential Responsibilities: Inspects and certifies aircraft at specific intervals as required by OEM and FAA. Troubleshoots system malfunctions, performs necessary corrective actions. Documents maintenance of aircraft on appropriate forms. Removes and replaces defective components. Complies with service bulletins, instructions and airworthiness directives as directed. Performs preflight/post flight turn around and daily inspections and servicing when required. Research aircraft logbooks and historical data as required. Complies with safety, foreign object damage, egress familiarization, and tool control program requirements. Serves as a point of contact with the Quality Assurance Representative. Advises management of problems that may delay scheduled delivery of aircraft to customer. 11) Ensures materials issued for assigned tasks are the correct items to repair the problem. Provides on-the-job training to new employees as required. Assists with supervision and inspects maintenance performed by FAA certified and non-certified personnel. Services oxygen, nitrogen, tires, oil and hydraulic systems. Performs corrosion control checks when required. Exhibits positive courteous behavior with customers businesses and coworkers. Assists coworkers and those in other departments to successfully perform job tasks and functions when necessary. Follows all safety procedures and practices as established by the Company and regulatory bodies. Complies with all established general and industrial safety rules and regulations as applicable to the contract, facility, and job assignment. Ensures safety, security and preservation of government and company owned equipment. Deals with the customer in courteous, professional and effective manner. Performs other related duties as assigned by management. Maintains the cleanliness of the work center. Assist is aircraft inventory, acceptance, and transfer inspections. Turn-up and taxi qualified as required. Perform all other position related duties as assigned or requested. Minimum Position Knowledge, Skills, and Abilities Required: Must have high school diploma or equivalent Must have a minimum of five (5) years' experience as an aircraft mechanic. Must be familiar with aircraft systems, tools, drawings, schematics, and normal safety requirements. Must have experience in corrosion detection, treatment, and prevention. Satisfactory completion of U.S. Armed Forces aircraft mechanic courses and / or five (5) years' experience as an aircraft mechanic or ten (10) years recent aircraft maintenance on similar type aircraft. Must be able to meet any Government / Company licensing / qualification requirements for the position. Must have a valid driver's license. Possess a high degree of expertise of aircraft systems, applicable maintenance / technical manuals and publications, basic tools, special tools, and test equipment. Must have a working knowledge of ground support equipment and corrosion detection, prevention, and treatment. FAA or A&P license preferred. Must be able to work all assigned shifts & schedules. Work Environment, Physical Demands, and Mental Demands: The diversity of working conditions may range from standard shop type environment where there is no physical discomfort, to an environment where inclement weather may subject individual to severe changes in temperature, wind, rain, etc. May be required to work where high noise hazards prevail. Will be required to wear protective clothing and other safety equipment. Will be required to work with hazardous materials. Occasional (5%) for rescue or detachment About Amentum Amentum is a global leader in advanced engineering and innovative technology solutions, trusted by the United States and its allies to address their most significant and complex challenges in science, security, and sustainability. Our people apply undaunted curiosity, relentless ambition, and boundless imagination to challenge convention and drive progress. Our commitments are underpinned by the belief that safety, collaboration, and well-being are integral to success. Headquartered in Chantilly, Virginia, we have approximately 50,000 employees in more than 70 countries across all 7 continents. Compensation Details: N/A The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. Benefits Overview: Our health and welfare benefits are designed to support you and your priorities. Offerings include: Health, dental, and vision insurance Paid time off and holidays Retirement benefits (including 401(k) matching) Educational reimbursement Parental leave Employee stock purchase plan Tax-saving options Disability and life insurance Pet insurance Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. Original Posting: Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. Inspecting and repairing ground support equipment Installing and removing Quick Engine Change (QEC) kits on aircraft engines Dealing with Coworkers/Clients/public JOB DUTIES: Responsibilities may include, but are not limited to: Performing engine QEC buildup actions, both assembly and tear down. Uses automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems Inspects, tests, and operates GSE to determine equipment serviceability and proper operation Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and components Removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories Stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses Disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations Operates, cleans, inspects, and services GSE towing vehicles; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations. Practices good housekeeping, tool control, Foreign Object Damage prevention and safety at all times. Additional responsibilities include working with a variety of repair and test equipment including welders, torches, pressure testers and electrical testers to name a few. Completing all required documentation and tagging requirements of QEC items. Order QEC parts from COMBS. Refer to technical publications to determine specifications to be met. Track and record calibration dates to insure that support equipment is up to date. Keep files with documentation and certifications of calibrated equipment. Ensure that equipment is sent out for calibration when due. Ensure that all equipment is accounted for. Assign I.D. numbers to each piece of equipment. When turning over equipment to the operating command make certain to have them sign a receipt for all equipment to keep on file in COMBS. Each LD. number must have a file of record. Performs maintenance and inspections on (GSE) according to applicable maintenance manuals, manufacturer specifications and FAA regulations. Research and order materials for repair of support equipment. Performs engine QEC build-up actions, i.e. assembly and teardown. Cleaning of warehouse, shops, offices and restrooms as required. Clerical and other assigned duties as required. Prepares GSE for storage and transportation Other Duties as assigned Abide by all Company policies and procedures not otherwise noted above. QUALIFICATIONS: Knowledge, Skills, and Abilities (Required Skills include the ability to:) Understanding of scheduling techniques and technical order requirements. Ability to accurately troubleshoot and repair complex aircraft engine/support equipment systems. Mental and visual ability to read and understand detailed technical publications and instructions. Ability to communicate effectively, both orally and in writing. Ability to deal courteously with the customer. Knowledge of generally accepted accounting principles sufficient to perform the job, duties, and tasks associated with the position. Knowledge of contractual requirements. Extensive working knowledge in logistics and data information systems. Education and Experience: Graduation from a standard four (4) year high school or equivalent (GED). Thirty-six (36) months in one or more of the maintenance trades or the Minimum three (3) years recent aircraft maintenance experience Valid FAA Airframe and Power plant Certificate Benefits include the following: Healthcare coverage Retirement Plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

GENERAL DESCRIPTION Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. DUTIES * Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems * Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills * Reads and interprets manufacturers' service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components * Work involves replacing or repairing worn or damaged components, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects * Repairs or replaces defective engine parts and reassembles and installs engine in aircraft * Adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes * Supervises the jacking and towing of aircraft * Enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily * Services engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition * Specializes in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair * May require specialization in sheet metal, electric work, avionics or other aircraft systems related disciplines * Will require the use of HVLP spray gun and various other corrosion control tooling * Work will be accomplished on and off aircraft depending on specific requirements * Work different shifts potentially * Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS * High school diploma or equivalent is required * Must have a minimum of two (2) years of experience on the C-130H/J variant aircraft * May be required to be licensed by Federal Aviation Administration * Must be a U.S. Citizen * We maintain a drug-free workplace and perform post offer, pre-employment and random substance abuse testing PHYSICAL REQUIREMENTS * To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. * Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day. * Must be able to climb stairs, ramps, ladders, and work stands, working at heights with fall protection devices. * Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. * May be required to lift up to 50 pounds and carry for short distances. * May be required to read dials/gauges, identify small objects and hand tools. * Must be able to see imperfections, micrometer readings and other small scales. * Must be able to communicate by voice and detect sound by ear. * Must be able to distinguish color and judge three-dimensional depth. * May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc. * Expected to work in high heat or extreme cold temperatures for extended periods of time. * May operate in austere CONUS and OCONUS locations. * Ability to wear a full face or forced air respirator. * Ability to work in confined spaces. * Availability/ability to work different shifts if needed EQUAL OPPORTUNITY EMPLOYER/VEVRAA/ADA TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Employment Opportunity Employer and a VEVRAA governed Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities. TNC provides all employees and job applicants equal employment opportunities in hiring and promotion without regard to age, sex, sexual orientation, marital status, race, religion, color, veteran status, genetic information, physical or mental disability, national origin or any other reason prohibited by law.

* Document detailed records of maintenance and repair work performed. * Always maintain training currency. * Lays out, locates, fits, trims, assembles, and installs parts assemblies and skins where dimensions are critical and fitting is to exacting tolerance. * Drill, countersink and rivet exterior skin panels where skin quality is critical. Works from all types of complex blueprints, E.O.'s and production illustrations * Completes inspection of existing aircraft structures * Completes any or all structural rework/repair, squawks, and E.O.'s. * May be required to work in confined space. * Fabricate detail parts from blueprint or engineering instructions * Perform aircraft inventory, acceptance, and inspections Material & Equipment Directly Used Drive company vehicle. Operate ground support equipment required to perform daily job functions. Working Environment Must be able to stand, walk, lift, and organize inventory within non-airconditioned hangar maintenance areas and outdoors flight line. Physical Activities The employee must occasionally lift and/or move up to 50 pounds. The employee must be able to work on their feet for 10 hours. Qualifications * Five (5) years of documented experience in aircraft structural installation, modification, troubleshooting and repair. * Heavy C-130 structural modification/inspection experience preferred. * Ability to read and interpret aircraft technical orders, drawings, and blueprints. * Always maintain training currency. * Must be self-motivated and have the ability to schedule job tasks to meet completion timeline. * Ability to communicate effectively * Must have a High School Diploma or GED equivalent. * Must be able to obtain and maintain in force a valid driver's license. * Must be a citizen of the United States of America * Must be able to pass a stringent background investigation * Must be able to utilize computer-based systems to perform duties * Must be able to work Independently and safely * Must be willing/able to work any shift or schedule. * Some travel possible, up to 25% Basic Qualifications: * High School Diploma/GED and 5 years of aircraft mechanical experience. * Ability to utilize computer-based systems to perform duties. * Must be willing/able to work any shift or schedule. * Benefits include the following: * Healthcare coverage * Retirement plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays * Learning and Development resources * Employee assistance resources * Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. * Benefits include the following: * Healthcare coverage * Retirement plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays * Learning and Development resources * Employee assistance resources * Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

Let your career take off with PSA Airlines About PSA PSA Airlines, a wholly owned subsidiary of American Airlines, offers unparalleled opportunities for growth and professional development. We value teamwork, diversity, and inclusivity and strive to create a safe, respectful, and happy work environment for our more than 4,000 employees. Our company culture, known as The PSA Way, is our foundation for operation and fosters stability, growth and a focus on the future while always placing safety at the forefront of everything we do. We are driven in our goals and achievements, eager to be better. We are reliable to one another and accountable for our actions. And we are caring in our daily interactions, with teammates, colleagues, and customers. Join our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. Benefits PSA offers the benefits you expect from a company focused on excellence. All eligible team members enjoy a comprehensive benefits package, including: * Travel privileges on the American Airlines global network * A generous vacation plan designed to let you enjoy your travel perks * 401(k) with company match * American Airlines Group (AAG) profit-sharing and bonus opportunities * A choice of three health plan options, all with nationwide coverage with the UnitedHealthcare Choice Plus network * Premium dental coverage * Vision plan options provided, including a plan that covers both glasses and contacts every year * Benefits navigation services, including finding a doctor, scheduling an appointment, understanding your medical bills, and free second opinion services * Access to 24-hour virtual urgent care services * Family planning and fertility treatment * LGBTQ+ friendly services including gender affirming care, assistance finding knowledgeable providers, and family planning * Company-paid Life and AD&D Insurance, Short-term and Long-term Disability, and supplemental life insurance options for spouses and dependent children * Flexible Spending Accounts for both Health Care and Dependent Care services * Comprehensive Employee Assistance Program providing a range of services, including 5 free in-person sessions with a health care professional Responsibilities Position Summary As the Airframe and Powerplant (A&P) Technician, you will impact PSA Airlines' business growth by conducting aviation repairs and services that allow for operations to be on time. By executing maintenance procedures in compliance with Federal Aviation Regulations and company standards, you are ensuring safe and reliable flights. Job Responsibilities * Will perform tasks necessary to comply with Federal Aviation Regulations and accept the responsibility for work performed by themselves and/or in conjunction with others and sign for same on the Company's approved forms. * Keep work areas clean. Return all equipment and tools to assigned areas. A&P Technicians will report all inoperative or faulty equipment to the Maintenance Supervisor or Lead Mechanic in charge. * Work will consist of and include any and all phases of repair and maintenance of aircraft with the aid of the employee's own tools, specialty tools provided by the Company, the use of test equipment, and Company-supplied technical manuals. * In certain cases, and A&P Technician may be authorized to perform required inspection items and assist in Company training programs. * Will at the commencement of each repair or inspection initiate the proper documentation. Parts tags will include a complete description of the discrepancy on all removed parts. Determine if the work to be performed is a Required Inspection Item. * Verifying, through proper documentation, that any part installed on any aircraft or component is approved for that aircraft or component and has been visually inspected and is free of damage or contamination. * Assure that hangar workshops and other areas assigned are maintained in an orderly manner. * Responsible for the Company's Security and Safety Management System (SMS) and associated Safety Risk Management and Safety Assurance outputs. * Perform other duties as assigned by the Maintenance Supervisor through the Lead Mechanic. Position Specifics Qualifications Required * Current FAA Airframe and Powerplant certification. * High school diploma or equivalent. * Valid, state-issued Driver's License. * Capable of using respirators and other personal protective equipment including eye and hearing protection. * Must possess or have ability to obtain a U.S. Passport or equivalent within 90 days of starting position. * Must be able to speak, read, and write in English. * Must be able to demonstrate authorization to work in the U.S. Preferred * Previous experience with CRJs. Additional Information Work Environment: This job operates inside a climate controlled building. This role routinely uses standard office equipment such as computers, telephones, photocopiers, facsimile machines and filing cabinets.Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms.Security Clearance: All employees are required to pass the fingerprint-based criminal history records check (CHRC) per 49CFR1542.209. AAP/EEO Statement: PSA Airlines is an equal opportunity employer; qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, age, disability, genetic information, protected veteran status or any other characteristic protected by law.Other Duties: Please note this job description is not designated to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The **Aircraft Mechanic I (Temporary)** is responsible for providing repair services on assigned airframe/aeronautical components and performing approved repairs. The ability to produce quality work in non-negotiable deadlines is part of this position. **Essential Responsibilities:** + Uses schematic diagrams, drawings, charts and technical publication in operating, testing, removing, troubleshooting and replacing aircraft system components. + Complies with the requirements of the FOD prevention, housekeeping, tool control, environmental and safety programs. + Adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. + Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. + Performs the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. + Performs aircraft conditional inspections including, but not limited to, 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves. + Performs all required aircraft servicing tasks. + Operates and inspects ground support equipment and documents/reports discrepancies prior to use. + Performs all tasks associated with ground movement of aircraft. + Orders parts and supplies as needed. + Follows technical data, manuals, regulations, company policy, and other maintenance directives as required. + Identifies and documents aircraft discrepancies on appropriate forms. + Performs other related duties as assigned. + Participates in towing and movement of aircraft in performing maintenance activities. + Removes, installs, opens, closes, aircraft equipment and panels as required. + All other duties as assigned within classification. + Perform all other position related duties as assigned or requested. **Minimum Position Knowledge, Skills, and Abilities Required:** + High school diploma or equivalent is required. + Minimum two years of Aircraft Mechanic experience. + Must be able obtain/maintain any company/government required licensing, certification, qualification, or clearance. + A working knowledge of aircraft systems and of the use of common aircraft hand tools and special tools is required. + Thorough understanding of Company processes and operations. Basic computer skills. Demonstrate professionalism through appropriate communication and behavior. Organizational and time management skills. + Ability to work effectively under pressure and in a high-paced and rapidly changing environment. + Ability to judge and make decisions quickly & accurately. Flexibility, ability to learn new concepts quickly. + Knowledge of technical documents such as technical bulletins, alert service bulletins, etc. + Completion of specialized courses is desired. + The ability to read and write and to comprehend technical data is required. + Ability to use hand tools and equipment/machinery. + Ability to read, write, and understand English + Must have a Valid Driver's License. + Must be able to work all assigned shifts & schedules. + A&P Preferred **Work Environment, Physical Demands, and Mental Demands:** + Capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. + Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. + Must be capable of carrying items up to 50 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. + Must be capable of wearing personal protective equipment for HAZMAT operations. + May be required to work night shifts. May work in Aircraft maintenance hangar or outside. + May be exposed to extreme noise, fumes, airborne particles, electrical shock hazards, or work near moving parts, vehicles or aircraft. + Some domestic travel may be required. **About Amentum** Amentum is a global leader in advanced engineering and innovative technology solutions, trusted by the United States and its allies to address their most significant and complex challenges in science, security, and sustainability. Our people apply undaunted curiosity, relentless ambition, and boundless imagination to challenge convention and drive progress. Our commitments are underpinned by the belief that safety, collaboration, and well-being are integral to success. Headquartered in Chantilly, Virginia, we have approximately 50,000 employees in more than 70 countries across all 7 continents. **Compensation Details:** N/A The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. **Benefits Overview:** Our health and welfare benefits are designed to support you and your priorities. Offerings include: + Health, dental, and vision insurance + Paid time off and holidays + Retirement benefits (including 401(k) matching) + Educational reimbursement + Parental leave + Employee stock purchase plan + Tax-saving options + Disability and life insurance + Pet insurance _Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits._ **Original Posting:** Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

**ESSENTIAL FUNCTIONS:** The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. + Inspecting and repairing ground support equipment + Installing and removing Quick Engine Change (QEC) kits on aircraft engines + Dealing with Coworkers/Clients/public **JOB DUTIES:** Responsibilities may include, but are not limited to: + Performing engine QEC buildup actions, both assembly and tear down. + Uses automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems + Inspects, tests, and operates GSE to determine equipment serviceability and proper operation + Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and components + Removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories + Stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses + Disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations + Operates, cleans, inspects, and services GSE towing vehicles; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations. + Practices good housekeeping, tool control, Foreign Object Damage prevention and safety at all times. + Additional responsibilities include working with a variety of repair and test equipment including welders, torches, pressure testers and electrical testers to name a few. + Completing all required documentation and tagging requirements of QEC items. + Order QEC parts from COMBS. + Refer to technical publications to determine specifications to be met. + Track and record calibration dates to insure that support equipment is up to date. + Keep files with documentation and certifications of calibrated equipment. + Ensure that equipment is sent out for calibration when due. + Ensure that all equipment is accounted for. + Assign I.D. numbers to each piece of equipment. + When turning over equipment to the operating command make certain to have them sign a receipt for all equipment to keep on file in COMBS. + Each LD. number must have a file of record. + Performs maintenance and inspections on (GSE) according to applicable maintenance manuals, manufacturer specifications **and** FAA regulations. + Research and order materials for repair _of_ support equipment. + Performs engine QEC build-up actions, i.e. assembly and teardown. + Cleaning of warehouse, shops, offices and restrooms as required. + Clerical and other assigned duties as required. + Prepares GSE for storage and transportation + Other Duties as assigned + Abide by all Company policies and procedures not otherwise noted above. **QUALIFICATIONS:** + **Knowledge, Skills, and Abilities (Required Skills include the ability to:)** + Understanding of scheduling techniques and technical order requirements. + Ability to accurately troubleshoot and repair complex aircraft engine/support equipment systems. + Mental and visual ability to read and understand detailed technical publications and instructions. + Ability to communicate effectively, both orally and in writing. + Ability to deal courteously with the customer. + Knowledge of generally accepted accounting principles sufficient to perform the job, duties, and tasks associated with the position. + Knowledge of contractual requirements. + Extensive working knowledge in logistics and data information systems. + **Education and Experience:** + Graduation from a standard four (4) year high school or equivalent (GED). + Thirty-six (36) months in one or more of the maintenance trades or the + Minimum three (3) years recent aircraft maintenance experience + Valid FAA Airframe and Power plant Certificate **Benefits include the following:** + Healthcare coverage + Retirement Plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources _Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans._ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.