Aircraft mechanic jobs in Sedona, AZ - 209 jobs

You will be the Aircraft Mechanic for the Quick-Response Team which is responsible for maintaining F‑35 aircraft readiness worldwide. This position is located at our Luke AFB, AZ site. What You Will Be Doing As the Aircraft Mechanic you will be responsible for delivering rapid, high‑quality maintenance support for F‑35 airframes in dynamic, global environments. Your responsibilities will include: - Execute nose‑to‑tail maintenance on F‑35 aircraft, ensuring airworthiness and mission readiness. - Rapidly deploy to customer sites, often with less than 24‑hour notice, supporting pop‑up tasks worldwide. - Coordinate with the Interim Contractor Support infrastructure to integrate efforts and share expertise. Maintain a valid flight line driver competency card and meet all physical performance standards. - Document maintenance actions and provide clear feedback to stakeholders. What's In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin's comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus - if you have the passion and courage to pursue ambitious goals, work hard, and enjoy what you do, then we want to build a better tomorrow with you. Who You Are You are a collaborative, self‑starting Aircraft Mechanic with a proven ability to make timely decisions in high‑tempo environments. You thrive on solving complex maintenance challenges, enjoy frequent travel, and are committed to maintaining the highest safety and quality standards. Further Information About This Opportunity MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. The selected candidate must possess an active Secret clearance to start. Physical requirements - regularly required to lift up to 50 pounds and perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, twist, and enter confined spaces. Basic Qualifications - Must have 2-years of hands-on F-35 maintenance experience to include working experience and knowledge of Autonomic Logistics Information System (ALIS) to include, Anomaly Fault Resolution System, Customer Relationship Management, Joint Technical Data Navigation, Portable Maintenance Aid (PMA)/Maintenance Vehicle Interface (MVI) activities, Configuration Management and forms documentation and supply chain management activities. - Requires minimum of 4 years hands-on working experience in 5 or 7-skill level USAF AFSC, CDI/CDQAR Navy NEC, or CDI/CDQAR United States Marine Corps, or equivalent on Fighter Attack Aircraft. - Knowledge of Safety, Tool Control, Foreign Object damage (FOD), Supply, Hazardous Material (HAZMAT), Quality, and Security programs. - Willingness to accommodate a heavy travel schedule with very short notice (more than 50% travel). Desired skills - An FAA aircraft and Power Plant Mechanic license is desirable. - Proficiency with LM's F-35 Nose-to-Tail maintenance concept. - Low Observable/Structures Maintenance Experience. - Avionics Systems Maintenance Experience. Weapons/Egress Systems Maintenance Experience. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. * Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They're dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about. As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Other Important Information By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to work remotely Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedule Information Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Security Clearance Information This position requires a government security clearance, you must be a US Citizen for consideration. National Pay Statement The base range for this position in California is $17.69 - 32.96. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. Premium Pay Statement The base range for this position in California is $17.69 - 32.96. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays.

TSC's Airborne Intelligence, Surveillance and Reconnaissance (AISR) Division is actively recruiting an expert Aviation Maintenance Technician to join our team in support of Flight & Ground Operations of a developmental aircraft. The ideal candidate will have a strong background in aviation mechanics, in both manned and unmanned aircraft systems, possess an acute attention to detail, as well as exceptional troubleshooting/problem solving skills to support the aircraft from development through operational phases. As part of the team, you will be responsible for conducting maintenance, inspections, and repairs on manned and unmanned aircraft systems and components, ensuring that all aircraft are mission-ready and meet applicable legal, contractual and safety performance standards. Ground & Flight Operations will be conducted at various test sites, with the primary location being located at Fort Huachuca, AZ (Sierra Vista). This position will formally report to the Test & Training Site Lead but will be responsible to multiple stakeholders within/outside of the division. This position will be responsible for developing and managing aviation Ground & Flight Operation Procedures, including the development of maintenance manuals, formal training programs, technology insertion. As an integral member of the Aviation Operations leadership team, other duties may be assigned. Key Responsibilities: Perform routine and preventive maintenance on manned and unmanned aircraft, including airframes, engines, avionics, line-replaceable-units (LRU) and other system components. Troubleshoot, repair, and replace defective or malfunctioning parts and systems. Support the development and testing phases of new technologies and configurations. Conduct inspections of aircraft systems in compliance with regulatory requirements and company safety standards. Assist in the assembly and disassembly of aircraft for flight tests, demonstrations, and operational missions. Maintain accurate maintenance logs and documentation for all aircraft. Collaborate with the engineering team to address technical issues and implement solutions during all phases of the aircraft lifecycle. Ensure all tools and equipment used are in proper working condition and comply with safety standards. Support operational personnel during pre-flight and post-flight procedures as required. Responsible for safe and effective daily operations of aircraft maintenance and flight line operations. Ensure compliance with; flight & ground procedures, training procedures, and standardization & evaluation procedures. Ensure worksite safety, and completion of digital and paper logbooks, maintenance records, FOD and tool control, Technical Orders, part accounting. Assures timely, accurate records are maintained. Execute work calendars, support Internal Audits and participate in performance reviews. Assist in preparing technical reports and briefings for the ADO and engineering/production team. Maintain access to and requirements for COMSEC access. Assists in the tracking of consumables, recording MX failures. Monitors the use of parts and tools and maintains inventories/logs. Required Knowledge: Through understanding of all physical aspects of airframe, powerplant, electrical systems, mechanical systems, RF systems, troubleshooting, personnel leadership. Past history of FAA Flight and Maintenance standards, airworthiness, and safety. Maintenance Technical Inspector Experience in an operational capacity of aviation mechanics. Adherence to DCMA procedures and reporting maintenance in logbooks. Use of maintenance manuals, Technical orders, Compliance Procedures. FOD control program adherence, execution. Required Skills: Exceptional knowledge of aviation flight line procedures and Maintenance Operations. Strong attention to detail and analytical skills. Excellent organization and planning skills, and excellent verbal and written communication. Ability to work independently in a fast-paced environment and get along with others. Ability to review, interpret, and apply industry standards (FAA/IACO) and ensure compliance to contract terms and requirements. Knowledge and experience with Air Vehicle Systems and subsystems, and Technical Manuals (General Systems, Job Guides, Work Instructions, Fault Isolation, etc.). Maintain Aircraft System maintenance logs and configuration with Logistician. Ability to obtain Crew Chief Instructor designation after 6 months of employment. Computer Skills Highly Proficient in Microsoft office suite. Able to create documents, spreadsheets, presentation materials quickly and efficiently. Experience with technical writing, preparation of reports in Adobe. Type >30 words per minute. Digital computer logging of Aviation Maintenance procedures - familiarity with commercial/military requirements for logging and maintaining aircraft. Understanding MS Windows computer functions and ability to teach others how to navigate digital maintenance resources. Required Qualifications: FAA Airframe and Powerplant (A&P) certification and 7 years' of experience in aviation maintenance operations. Minimum of 3 years group 3-5 UAS maintenance operations experience. Strong knowledge of aircraft systems, including engines, avionics, flight controls, and airframes. Strong mechanical and electrical troubleshooting skills. Prior leadership experience in an aviation maintenance role. Knowledge and experience with Aircraft Technical Manuals (General Systems, Job Guides, Fault Isolation, etc.). Experience installing and maintaining electrical systems. Ability to troubleshoot electrical issues, read electrical diagrams, schematics, and understand the theory of operation. Experience with developmental or experimental aircraft is a plus. Experience with Electrostatic Discharge (ESD) precautions and electrical safety measures. Experience using multimeter, oscilloscope, and like equipment to test electrical systems. Ability to perform line and site level maintenance and repairs. Ability to maintain aircraft maintenance logs and configuration. Excellent organization skills. Excellent written & verbal communication skills. Active SECRET security clearance. FAA Class 3 Medical. Willingness to travel as needed for field operations and support. Work Experience in aviation field in OCONUS (deployed) location preferred. Clean Background Check. Physical Work environment: The position will require working in austere locations with limited access to selective food, shelter provided at worksite. Ability to work outside for 12 hr. shifts in >100 deg F weather. Ability to lift and carry equipment and tools (up to 50 lbs). Ability to work in various weather conditions, including extreme heat and cold. Ability to work at heights or in confined spaces as needed. Must have good vision (corrective lenses acceptable) and hearing, as required for safety in aircraft maintenance. While performing work duties, the employee is regularly required to walk, sit and stand and reach with hands and arms. This position requires close vision, distance vision, color vision, depth perception and ability to adjust focus. Safety Equipment: Ability to use PPE for mechanical, audible, and chemical hazards Medical Requirements: A FAA class 3 flight physical is required annually. In addition to being found fit for the specific deployment by a medical and dental evaluation prior to deployment, there is also the requirement to comply with additional medical restrictions IAW MOD 15. MOD 15 is a set of physical and psychological standards put forward by the United States Central Command, and applies to all U.S. uniformed service members, government civilian employees, U.S. Department of Defense (DoD) contractor employees, and volunteers deploying to CENTCOM's area of responsibility. Final determination for approval resides with the CENTCOM Surgeon prior to deployment. U.S. Citizenship Required: Yes ACTIVE SECRET DoD Security Clearance Required for this Position: Yes Drug screening: Required for employment, may be tested any time. Travel: Yes, less than 25%. The candidate must be able to travel and/or deploy with relatively short notice in the event of a manning shortfall. Relocation Assistance Available: Yes Position Contingent upon Award of Contract: No TSC Benefits: TSC offers a stable work environment, a competitive salary and a comprehensive benefits package; including ESOP contributions, 401k Matching Program, Flexible Work Schedules, Tuition Reimbursement, Paid Leave and much more. Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

For more than 50 years, Marsh Aviation has been a leader in engineering and innovation for performance and reliability-oriented aircraft upgrades and modifications. The company is known world-wide and specializes in repurposing existing airframes into modern, capable, efficient and cost-effective aircraft. Job Description Aircraft Mechanic The Aircraft Mechanic performs test, repair, installation, and modification on a variety of aircraft systems and structures. General duties include: Maintain, repair, and modify components including but not limited to structural, flight controls, hydraulics, pneumatics, fuel systems, and mechanical components; Able to perform a variety of diagnostic and mechanical duties on turboprop and piston multi-engine aircraft. Responsible for clear, concise and accurate reports in logs, inspection reports, and production documents. Qualifications Experience and Qualifications: FAA Airframe and Powerplant (A&P) certificate is required; Working knowledge of aircraft engines, mechanical systems, and components; Familiar with CFR parts 21 and 145; Able to read and understand approved manuals, Illustrated Parts Breakdowns, Airworthy Directives, Service Bulletins, and other technical service documentation; Working knowledge of 100 hour, annual, and progressive inspection procedures set forth in FAR 43; 10 years + aviation experience; High school diploma or equivalent; Successful candidates must be US Citizens or Permanent Residents. Additional Information All of your information will be kept confidential according to EEO guidelines. Marsh Aviation offers competitive pay and benefits; we invite you to learn more about the company at ********************** Marsh Aviation is an Equal Opportunity Employer.

The USMC MQ-9 CLS Mechanic is a highly qualified and skilled aircraft/composite mechanic with experience in structures, hydraulics, engines and avionics using diagrams, blueprints, and publications. The mechanic will directly support the USMC MQ-9 Site Manager while at the same time being available to support hands-on maintenance and leadership/training on an as needed basis. **Essential Responsibilities:** + Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc. + Diagnose malfunctions, isolate causes, and correct breaks. + Test engine operations, use test equipment to locate source of malfunction(s). + Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices. + Disassemble and inspect parts for wear, warping, or other defects. + Repair/replace defective engine components and reassemble and install engines in aircraft. + Adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. + Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. + May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. + Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. + Other tasks as assigned. **Minimum Qualifications:** + Must have an active Secret US Government clearance with ability to obtain Top-Secret clearance. Note: US Citizenship is required to obtain a Secret Clearance. + Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum. + Minimum of five years of actual Aircraft Mechanic maintenance experience required. + Minimum of two years' experience on MQ-9 aircraft, as Aircraft Mechanic. + Must have advanced knowledge of basic and complex mechanical maintenance and repair. + Must possess advanced knowledge of technical publications related to aircraft mechanical maintenance. + Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. + Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have an advanced understanding of applicable systems. + Shall have been designated a CDI or Red-X inspector for their applicable specific T/M/S UAS aircraft or equipment employed to inspect. + Shall have previous CDI, CDQAR, Organizational Maintenance experience. + Must be able to inspect and operate ground support and auxiliary equipment. + Must have knowledge of CNAFINST 4790.2 NAMP and DAFI 21-101. + Must achieve a passing grade in all required courses/certifications for continued employment, as needed. + Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. + Must be able to speak, read, write, and understand English. + Must have current/active State Issued Driver's License. + Must be able to acquire and maintain a valid flight-line Government Driver's License. **Preferred Qualifications:** + Top Secret clearance + Associate degree in a relevant career field. + Licensed by the FAA as an Airframe and Powerplant Mechanic. + Aircraft Mechanic experience within the last 10 years. + Prior experience as a Defense Contractor. + MQ-9 Aircraft Composite Repair / Replacement Experience. + NDI Qualified. \#MQ-9 Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

Duties & Responsibilities: Airframe & Powerplant Mechanic The A&P Mechanic is responsible for performing scheduled and unscheduled maintenance of flight school aircraft. The mechanic will be accountable for completing all work in accordance with AeroGuard Company procedures and requirements, as well as all applicable regulatory requirements. This is a 5 day shift from 4:00 am to 2:30 pm. Responsibilities include but are not limited to: Must have strong interpersonal and team building skills. Must have excellent written and oral communication skills. Must have the ability to read and understand technical data such as maintenance manuals, parts catalogs, engineering drawings, service bulletins, and airworthiness directives. Must have knowledge of federal regulations relating to Title 14 parts 43 and 91. Assure that work areas are kept clean and organized. Must be able to be flexible and work all shifts on an as needed basis. REQUIREMENTS EDUCATION Airframe and Powerplant license required at the time of hire. EXPERIENCE A minimum of two recent and consecutive years of GA experience as a certificated A&P. Experience on Piper aircraft is preferred. G1000 experience is a plus. SKILLS AND ABILITIES Can work independently with the ability to make airworthiness decisions. Ability to manage workflow and adjust priorities as needed. Troubleshoot, repair, inspect, and perform maintenance on company aircraft in accordance with applicable technical data and FAA regulations. Will be required to make aircraft logbook entries and release aircraft for return to service. Must be familiar with Microsoft Office and able to learn Talon RMS computer maintenance program. Must have basic hand tools. EQUIPMENT/MACHINERY USED General office equipment such as facsimile, copier, personal computer, etc. Vehicle operation such as company van, truck, golf cart, aircraft etc. as required. Will require the use of various pieces of shop equipment and tools. Exposure to solvents, aviation gasoline, etc. PHYSICAL AND SAFETY REQUIREMENTS Will be working in many environments inside and outside of the facility. Will have extensive exposure to aircraft, simulators, outside conditions and equipment. May have some medium lifting up to 50 lbs. May require prolonged periods of sitting or standing, bending and stooping. OTHERS Extreme attention to detail. Self-starter does not wait for others to provide work, finds ways to keep busy or help others. Flexible/adaptable to fast changing pace and instructions according to flight school priorities. Job Type: Full-time Salary: $35.00 - $40.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Paid time off Retirement plan Vision insurance Schedule: 8 or 10-hour shift Day shift Night shift Ability to commute/relocate: Chandler, AZ 85286: Reliably commute or planning to relocate before starting work (Preferred) Education: High school or equivalent (Preferred) Experience: Aircraft maintenance: 2 years (Preferred) License/Certification: Airframe & Powerplant License (Required) Work Location: In person

Job Description GAL AeroStaff Ltd. is an aerospace staffing is a company specializing in temporary and permanent staffing for general and technical positions the aviation and aerospace industry. In keeping with this goal, each benefit program has been carefully devised. These benefits include time-off benefits, such as vacations and holidays, and insurance and other plan benefits. We are constantly studying and evaluating our benefits programs and policies to better meet present and future requirements. AerSale - Non-Licensed Aircraft Mechanic Location: open to all sites Pay: $24-$36/hr DOE Travel Pay: $500 Referral Bonus: $250 Tools Required Open to Military Experience About the Role AerSale is seeking skilled Non-Licensed Aircraft Mechanics to support inspection, repair, modification, and overhaul of commercial and cargo aircraft. This position works in a high-volume MRO environment with hands-on tasks across multiple aircraft platforms. Candidates with strong mechanical aptitude-whether from aviation, military, automotive, diesel, or related fields-are encouraged to apply. Key Responsibilities Perform routine and non-routine aircraft maintenance tasks under the supervision of licensed personnel. Assist in troubleshooting, component removals/installs, and system repairs. Follow maintenance manuals, technical data, and work instructions. Complete task documentation accurately and ensure work meets FAA and company standards. Use hand tools, power tools, and ground support equipment safely and correctly. Maintain a clean, organized, and safety-focused work environment. Support A&P mechanics, inspectors, and leads as needed to meet production goals. Qualifications Previous mechanical experience required; aviation or military preferred. Ability to read and understand basic aircraft manuals and technical instructions. Familiarity with safe use of aircraft tools and equipment. Must supply own basic toolset. Ability to work overtime and adapt to changing priorities in a fast-paced MRO setting. High school diploma or equivalent. Why Work with Us Competitive hourly pay: $24-$36/hr DOE $500 travel pay for eligible travelers $250 referral bonus Long-term MRO opportunity with advancement potential Work with a respected aviation maintenance organization across multiple aircraft platforms Supportive environment open to candidates transitioning from military or other mechanical industries

Job DescriptionAre you eager to be part of an innovative team in the aviation industry, transforming the way we approach aviation technology?Our client stands as a prominent figure in the realm of aircraft window design, manufacturing, and the production of composite parts at their cutting-edge facility. Boasting ISO 9001:2015 / AS9100D certification, they specialize in aerospace window/windshield composite intricacies, sheet metal wing spars, and fuselage assemblies.They are currently on the lookout for a Regional Repair Sales / Aircraft Window Technician possessing an A&P License in locations including Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC.What's in It for You:Salary: $45,000-$60,000 annual bonus, potential for substantial monthly incentives Position Type: Permanent - Full-time. Benefits: Comprehensive package including Medical, Dental, 401k, Disability, Company-provided life insurance, and FSA.A Glimpse into the Life of an Aircraft Technician / A&P Mechanic:As the Aircraft Technician / A&P Mechanic, your primary mission is to provide aircraft window services to our existing clients while expanding our customer base and sales within your designated Regional Market. Your responsibilities include inspecting aircraft windows, assessing defects for airworthiness, repairing scratches, pits, and other window damage, as well as removing and installing replacement windshields and windows.Key Responsibilities: Removing existing windows. Preparing and installing new windows. On-call 24/7 to respond to customer requests for emergency AOG (Aircraft on Ground) services. Utilizing an orbital sander with various grits of sandpaper to restore damaged areas. Reviewing, interpreting, and applying technical data relevant to your tasks. Managing the acquisition of purchase orders from customers as per the provided quotes. Coordinating service schedules with aircraft owners/operators and maintenance managers. Completing and submitting billing information and evaluation forms to our headquarters in Wichita, KS. Providing the necessary airworthiness documents to customers upon job completion. Traveling as required to customer locations via ground transportation, air travel, or airlines. Compiling weekly expense reports detailing costs for gasoline, entertainment, and customer relations. Signing off on all work orders and maintaining part traceability records. Conducting daily visits and/or phone communication with both current and potential customers. Developing and expanding sales in the assigned Regional Market. Seeking guidance and direction as needed for your duties. Keeping your supervisor/manager informed of the status of your work. Reporting problems and potential issues to your supervisor/manager as soon as possible. Maintaining a neat and orderly work area. Presenting a well-groomed appearance suitable for the role and context. Respecting the confidentiality of company, customer, and personnel information. Performing additional duties and tasks as assigned by your supervisor. Assisting and training other employees as required. Qualifications: Education: High School Diploma/General Education Degree (GED). Experience: Preferred sales experience, 1 year of orbital sanding experience preferred, auto body experience preferred, previous aircraft experience preferred, A&P license or AMT certificate preferred, sales experience preferred. Technical Skills: Proficiency in using various measuring devices, strong mechanical aptitude, ability to read and interpret blueprints (preferred), ability to read and interpret technical manuals. Problem Solving/Decision Making: Ability to read and comprehend mechanical and technical manuals, applying them to practical field situations. Capability to work independently and communicate effectively with both internal and external customers, delivering exceptional customer service in a timely manner. Essential Job Functions/Physical Demands: The physical demands encompass standing on wings, moving in and out of cockpits, and working inside and outside aircraft. Travel is a requirement, with working hours ranging from 2 to 12 per day depending on demand. Ability to stand and/or sit for 8 hours a day. Ability to lift/carry weights of up to 70 lbs. Ability to twist, bend, and stoop for 8 hours a day. Ability to pinch and grip various tools with fingers and hands, using pushing and pulling motions for 8 hours a day. Ability to reach for 8 hours a day. Clear and effective communication skills. Proficiency in understanding and following work orders and process specifications. Capability to handle buffing and polishing tools for 8 hours a day. Comfort with climbing up and down ladders. If you're intrigued by the Aircraft Technician / A&P Mechanic role in Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC, seize the opportunity today!This job opportunity is presented by Total Aviation Staffing, LLC, an Employment Agency providing aviation staffing services.

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.

Job DescriptionDescription: Maintenance Technicians are responsible to the Maintenance Supervisor and shall assure that the procedure outlined in this manual as well as all FAA Regulations and manufacturer's instructions are complied with. In addition to all responsibilities listed below, work involves the responsibility of performing routine maintenance, and major inspections on HondaJet, Piper, TBM, Pilatus, LearJets, Beechjet, Citations and other corporate aircraft. Troubleshooting, repair, and modification of aircraft systems and engines is accomplished by this position. In addition, component removal and reinstallation, operational checks, leak checks, and engine runs are all within the responsibility of the AMT. The AMT is responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution. Essential Functions and Responsibilities: Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator. Responsible for planning and coordinating the activities of their shop or area, so as to minimize delays and increase production and efficiency. Ensure that all work accomplished will be completed in strict accordance with the manufacturer's maintenance and repair instructions and TITLE 14 CFR part 43. Exercise all reasonable care to protect all parts- sub assembles; major assembles and completed units against loss or damage. Ensure that all applicable repair station forms utilized are properly completed. Ensure good housekeeping rules are observed and that all shop-working areas are kept clean and orderly at all times. Ensure that proper tools and equipment are available and those tools are maintained in serviceable condition and ensure that any tool which is found unserviceable for any reason will be removed from service. He will be responsible for good housekeeping and will ensure that housing and facilities and safety precautions are adequate. Ensure proper handling of parts and the preservation of all units or parts during the work process through the maintenance department. Required to be thoroughly familiar with the requirements of the repair station manual, FAA Regulations, Airworthiness Directives and Advisory Circulars, Manufactures Service Letters/Bulletins and engineering orders. Communicates with the maintenance lead technicians concerning progress of the assigned work. Perform airframe and powerplant repairs, inspections and modifications. Removal and disassembly of defective parts, assembly and installation of replacement parts and testing of system. Interpret technical manuals, drawings and blueprints. Ensure that all discrepancies are signed off with all the information completed, such as part numbers, maintenance manual, ATA and Chapter, etc. Displays and promotes a positive attitude toward work and other employees. Use experience and technical expertise to assist when necessary to meet completion and production schedules and produce the quality our company has come to expect. Assure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks. Identify any employees' problems and concerns and deal with them, if unable to solve the problems, forward them to management. Technicians shall have all their work inspected (except for off-site maintenance, see off-site maintenance requirements) by an appropriately rated inspector as listed on the Roster of Management Supervisory and Inspection Personnel at the completion of each task. Participates with management to strategize and implement new maintenance tactics. Provide leadership and communication to subordinates and employees. Performs related work as assigned. Requirements: Education: Five or more years related experience and/or training; or equivalent combination of education and experience. Airframe and Powerplant (A&P) Certificate (Preferred). Experience: Five or more years demonstrated experience in aircraft maintenance inspections and repairs. Strong understanding in 135 and 145 repair station operations/regulations required. Minimum Work Experience Requirement: Clean driving record. Able to pass a background check. Ability to pass a drug screening test. Willing to work weekends, if needed. Willing to work off location, if needed. Ideal candidate will have the following work styles: Attention to detail. Persistence in the face of obstacles. A willingness to take on responsibilities and challenges. Being reliable, responsible, and dependable, and fulfilling obligations. Being pleasant with others on the job and displaying a good-natured, cooperative attitude. Being sensitive to others' needs and feelings and being understanding and helpful on the job. Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods. Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations. Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace. Results oriented Proven ability to achieve goals. Follows through and meets deadlines; Strong organizational, multi-tasking and time management skills; Strong problem-solving and analytical skills. Communication Oral Communication speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Participates in meetings. Written Communication Writes material in clear concise terms.

Maintenance Technicians are responsible to the Maintenance Supervisor and shall assure that the procedure outlined in this manual as well as all FAA Regulations and manufacturer's instructions are complied with. In addition to all responsibilities listed below, work involves the responsibility of performing routine maintenance, and major inspections on HondaJet, Piper, TBM, Pilatus, LearJets, Beechjet, Citations and other corporate aircraft. Troubleshooting, repair, and modification of aircraft systems and engines is accomplished by this position. In addition, component removal and reinstallation, operational checks, leak checks, and engine runs are all within the responsibility of the AMT. The AMT is responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution. Essential Functions and Responsibilities: * Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator. * Responsible for planning and coordinating the activities of their shop or area, so as to minimize delays and increase production and efficiency. * Ensure that all work accomplished will be completed in strict accordance with the manufacturer's maintenance and repair instructions and TITLE 14 CFR part 43. * Exercise all reasonable care to protect all parts- sub assembles; major assembles and completed units against loss or damage. * Ensure that all applicable repair station forms utilized are properly completed. * Ensure good housekeeping rules are observed and that all shop-working areas are kept clean and orderly at all times. * Ensure that proper tools and equipment are available and those tools are maintained in serviceable condition and ensure that any tool which is found unserviceable for any reason will be removed from service. He will be responsible for good housekeeping and will ensure that housing and facilities and safety precautions are adequate. * Ensure proper handling of parts and the preservation of all units or parts during the work process through the maintenance department. * Required to be thoroughly familiar with the requirements of the repair station manual, FAA Regulations, Airworthiness Directives and Advisory Circulars, Manufactures Service Letters/Bulletins and engineering orders. * Communicates with the maintenance lead technicians concerning progress of the assigned work. * Perform airframe and powerplant repairs, inspections and modifications. * Removal and disassembly of defective parts, assembly and installation of replacement parts and testing of system. * Interpret technical manuals, drawings and blueprints. * Ensure that all discrepancies are signed off with all the information completed, such as part numbers, maintenance manual, ATA and Chapter, etc. * Displays and promotes a positive attitude toward work and other employees. * Use experience and technical expertise to assist when necessary to meet completion and production schedules and produce the quality our company has come to expect. * Assure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks. * Identify any employees' problems and concerns and deal with them, if unable to solve the problems, forward them to management. * Technicians shall have all their work inspected (except for off-site maintenance, see off-site maintenance requirements) by an appropriately rated inspector as listed on the Roster of Management Supervisory and Inspection Personnel at the completion of each task. * Participates with management to strategize and implement new maintenance tactics. * Provide leadership and communication to subordinates and employees. * Performs related work as assigned. Education: * Five or more years related experience and/or training; or equivalent combination of education and experience. * Airframe and Powerplant (A&P) Certificate (Preferred). Experience: * Five or more years demonstrated experience in aircraft maintenance inspections and repairs. * Strong understanding in 135 and 145 repair station operations/regulations required. Minimum Work Experience Requirement: * Clean driving record. * Able to pass a background check. * Ability to pass a drug screening test. * Willing to work weekends, if needed. * Willing to work off location, if needed. Ideal candidate will have the following work styles: * Attention to detail. * Persistence in the face of obstacles. * A willingness to take on responsibilities and challenges. * Being reliable, responsible, and dependable, and fulfilling obligations. * Being pleasant with others on the job and displaying a good-natured, cooperative attitude. * Being sensitive to others' needs and feelings and being understanding and helpful on the job. * Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods. * Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations. * Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace. * Results oriented Proven ability to achieve goals. Follows through and meets deadlines; Strong organizational, multi-tasking and time management skills; Strong problem-solving and analytical skills. * Communication Oral Communication speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Participates in meetings. Written Communication Writes material in clear concise terms.

Discover Your Future with Embry-Riddle Aeronautical University! Embry-Riddle: A Global Leader in Aviation and Aerospace With vibrant campuses in Daytona Beach, FL and Prescott, AZ, plus a Worldwide network across approximately 120 locations, Embry-Riddle stands as the world's largest aviation and aerospace university. For over 95 years, we've been pioneering education in STEM fields, serving over 11,600 residential students and 19,200 globally in the 2023-24 academic year. Explore our cutting-edge programs in Applied Science, Aviation, Business, Technology, Engineering, Safety, Security, and Space. Aircraft Worker Candidate Pool Embry-Riddle Aeronautical University is building a pool of qualified candidates for current and future opportunities as Aircraft Workers (AWs). This entry-level program offers aspiring aviation maintenance professionals-especially those with mechanical experience in automotive, marine, military, or industrial trades-a pathway to enter and grow within the aviation industry. AWs are paired with certificated Aircraft & Powerplant Maintenance Technicians in a helper/assistant role, gaining skills and hands-on experience while contributing to Embry-Riddle's aircraft maintenance operations. As AWs gain proficiency, they progress through four defined levels (A1-A4), each with increasing responsibility, while remaining under the direct supervision of both their assigned mentor A&P and the crew shift lead. Work performed by AWs is conducted under the oversight of a certificated A&P mentor and crew shift lead. Lower-level AWs focus on support tasks such as cleaning, removing, preparing, and opening panels. Higher-level AWs are trained for basic maintenance tasks but remain under supervision. Top-level AWs perform at the functional equivalent of an entry-level A&P mechanic, but do not have return-to-service or inspection release authority. Level A1 - Basic Mechanical Skills Demonstrated basic mechanical aptitude Verified by test, training, or past work experience in construction, manufacturing, industrial, or similar environments Entry point for candidates seeking a pathway into aviation careers Level A2 - Automotive, Marine, or Military Experience Mechanical skills obtained through direct work experience in automotive, marine, or military service Brings industry-specific background with proven hands-on technical ability Level A3 - Aviation & Manufacturing Experience Aviation-related skills obtained through military service or aerospace/aviation manufacturing environments Eligible to obtain a Repairman Certificate with privileges appropriate to demonstrated skillsets Demonstrated proficiency in aviation maintenance practices Level A4 - Advanced Technical Skills / Near A&P Equivalent Technical knowledge and hands-on ability equivalent to a Level 1-2 A&P mechanic Sufficient work hours and documented training to qualify for the FAA General Test for the A&P license Eligible to obtain a Repairman's Certificate with at least 90% of qualifications completed in defined skill areas Functionally equivalent to an entry-level A&P mechanic Perks Await You at Embry-Riddle! Generous Time Off: Enjoy 9+ paid holidays, including the day after Thanksgiving and the week between Christmas Eve and New Year's Day. Personal Leave: Relax with 12 days of personal leave for non-exempt employees or 18 days for exempt full-time employees in your first year. Tuition Coverage: Get 100% tuition coverage for yourself for one undergraduate and one graduate degree, and discounted rates for your spouse and dependent children up to age 26. Retirement Contributions: ERAU contributes 6% of your base salary to your retirement plan and offers a 4% matching contribution - with no vesting period. Application process/requirements To submit your application for this opportunity, please visit the Embry-Riddle Career Site and search for requisition number R310272. Please attach all relevant materials to your application when you apply online. Complete submissions include: Cover letter Full Resume Contact information for at least three professional references (please note that references may be contacted as part of the interview/screening process) Current Embry-Riddle employees: Please apply directly through the ERAU Employee Hub Central application within Workday. Embry-Riddle is committed to fostering a workplace where all individuals are valued and respected. We strive to ensure that all faculty, staff, and students are treated fairly and provided equal opportunities for employment, advancement, compensation, training, and other benefits of employment. Embry-Riddle makes employment decisions - including hiring, promotions, compensation, and other terms of employment - based on individual merit, qualifications, and abilities. Embry Riddle is strongly opposed to discrimination and harassment, and such behavior is prohibited by university policy. Embry Riddle does not discriminate on the basis of race, color, national origin, sex, disability, veteran status, predisposing genetic characteristics, age, religion, or pregnancy status, or any other status protected by federal, state, or local law, in its employment, educational programs, admissions policies, financial aid, or other school-administered programs or activities. For further information, please visit our website. Qualifications See description of levels-

The UH-60 Aircraft Mechanic - Avionics is responsible for the inspection, maintenance, troubleshooting, repair, and modification of avionics systems installed on the UH-60 Black Hawk helicopter. This position ensures aircraft avionics systems are fully mission-capable, safe, and compliant with applicable technical manuals, regulations, and operational requirements. Essential Duties and Responsibilities Perform scheduled and unscheduled maintenance on UH-60 avionics systems, including communication, navigation, flight control, and mission equipment Troubleshoot and isolate avionics system malfunctions using technical manuals, schematics, test equipment, and diagnostic tools Remove, repair, replace, and reinstall avionics components such as radios, GPS, flight instruments, wiring harnesses, displays, sensors, and integrated avionics units Conduct operational and functional checks to verify system performance and airworthiness Perform aircraft inspections in accordance with maintenance schedules and technical directives Document maintenance actions accurately in aircraft logs, maintenance records, and electronic tracking systems Interpret and comply with applicable technical manuals, maintenance procedures, and safety regulations Assist with aircraft modifications, upgrades, and incorporation of avionics kits or mission equipment Support ground and flight operations as required, including preflight and postflight inspections Maintain avionics tools, test equipment, and work areas in a clean, safe, and serviceable condition Adhere to safety, quality, and environmental standards at all times Required Qualifications High school diploma or equivalent Completion of military or civilian avionics maintenance training Experience maintaining UH-60 (Black Hawk) avionics systems or similar rotary-wing aircraft Ability to read and interpret wiring diagrams, schematics, and technical publications Proficiency with avionics test equipment and diagnostic tools Ability to work independently and as part of a team Strong attention to detail and problem-solving skills FAA Airframe and/or Powerplant (A&P) license Prior military aviation maintenance experience (15 series, 68 series, or equivalent) Experience with integrated avionics systems, digital flight displays, and mission equipment Knowledge of Army or DoD maintenance documentation systems Active or ability to obtain a security clearance (if required) Physical Requirements Ability to lift, push, and pull up to 50 pounds Ability to work in confined spaces and at heights Ability to stand, bend, kneel, and climb for extended periods Willingness to work outdoors in varying weather conditions Work Environment Hangar, flight line, and field environments May involve shift work, weekends, and deployment or travel as required Benefits Available Employee & Family Health, Dental, and Vision Insurance Options $50,000/$100,000 Life/AD&D Insurance and 24/7 Teledoc Svcs Retirement Savings Plan (similar to a 401(k) Employee Assistance Program (EAP) Cash Equivalent Benefits Paid Federal Holidays Paid Sick Leave Paid Vacation Other benefits may include, but not be limited to: a variety of other Personal Leave days off, Uniform and PPE provisions, paid training, performance awards, and occasional meal, beverage, or snack accommodations. (Please Note: Not all benefits will apply, based on a variety of factors, i.e., opt out and plan provisions, etc.) LOGMET is an Affirmative Action and Equal Opportunity Employer: we welcome and encourage all individuals, including veterans and individuals with disabilities, to apply! If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact LOGMET's Human Resources Department Manager directly: *************, **************, Ext.4 We sincerely appreciate your consideration; please feel free to contact LOGMET's HR Department anytime, with any questions you may have.

**Aircraft Mechanic III (LUH72) A&P** Performs scheduled and unscheduled aircraft maintenance, to include repairs, modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise and guidance to solve complex problems by interpreting technical data such as; blue prints and manufactures manuals. + Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft Sheetmetal/structural modification and repair and the ability to determine functionality of complex electrical systems. + Required thorough knowledge of aircraft mechanical component troubleshooting, diagnosing problems, repair procedures and replacement of parts requires broad knowledge of aircraft sheet metal/structural modifications and repair. + Required basic knowledge of electrical theory. + Required to have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. + Required working knowledge of making entries in aircraft logbooks & records, military technical publications, and the Army's Unit Level Logistics Aviation Information System, ULLSAE. + Required to have thorough knowledge of aircraft sheet metal and structural modification and repair. + Required to have the ability to determine functionality of non-complex electrical systems. + Required to have detailed knowledge of aircraft unique tools such as cable tensiometers. + Accomplishes inspections including, but not limited to preflight, thru-flight, basic post-flight, and phase inspections. + Launches and recovers aircraft as required. + Performs operational checks of all aircraft systems and maintains aircraft appearance and cleanliness. + Operates all associated ground support equipment and uses hand tools, special tools, and fixtures applicable to aircraft. + Performs all tasks associated with ground movement of aircraft. + Annotates maintenance actions in aircraft records/forms and completes associated CAMS entries. + Practices good housekeeping, tool control, FOD Awareness and prevention and safety at all times. + Perform other qualified duties as assigned. **Minimum Requirements** + Knowledge of the use of aircraft hand tools, special tools, and test equipment is required. + Must have a working knowledge of aircraft safety requirements and know how to operate portable firefighting equipment. + The ability to read, interpret, and comprehend schematic diagrams, drawings, charts, and technical publications are required. + Must be able to routinely lift and/or move objects weighing up to 50 pounds. + Must be able to perform duties of the job including, but not limited to, standing, lifting, bending, pushing, and pulling for extended periods of time. + Frequently required to climb or balance and work in small spaces, ladder work and working at heights at or above 40feet is required. + Required valid up-to-date A&P license and required to have five years aviation maintenance experience, five years rotary wing aircraft experience, and two years on the assigned MDS. All experience must be within the ten most recent years. + If no A&P license, required to have five years aviation maintenance experience, five years rotary wing aircraft experience, and two years on the assigned Mission Design Series (MDS). All experience must be within the ten most recent years. + All mechanics assigned to perform maintenance on FAA certified aircraft must meet FAA requirements. + Required to possess the level of experience necessary to inspect all required aeronautical type maintenance to be performed by skill class Mechanic I and must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. + Required thorough knowledge of aircraft mechanical component troubleshooting, diagnosing problems, repair procedures and replacement of parts requires broad knowledge of aircraft sheet metal/structural modifications and repair. + Required basic knowledge of electrical theory. + Required thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. + Required working knowledge of making entries in aircraft logbooks & records, military technical publications, and the Army's Unit Level Logistics Aviation Information System, ULLSAE. + Required thorough knowledge of aircraft sheet metal and structural modification and repair. + Required ability to determine functionality of non-complex electrical systems. + Required detailed knowledge of aircraft unique tools such as cable tensiometers. + Driver's License + High School Diploma or Equivalent required. + Must provide own Tools/ Toolbox / Tools must be shadowed and etched with PID **Clearance Requirements:** + Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility. **Physical Requirements:** + The diversity of work conditions may range from an environment where there is little or no physical discomfort to an environment where inclement weather may subject individual to severe changes of temperature, wind, rain, or snow, ice, etc. + May be required to work in areas where high noise hazards prevail. May be exposed to fumes or airborne particles. + May be exposed to electrical shock hazards. + Must be able to routinely lift and/or move objects weighing up to 50 pounds. + Must be able to perform duties of the job including, but not limited to, standing, lifting, bending, pushing, and pulling for extended periods of time. + Frequently required to climb or balance and work in small spaces, ladder work and working at heights at or above 40feet is required. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

GAL AeroStaff Ltd. is an aerospace staffing is a company specializing in temporary and permanent staffing for general and technical positions the aviation and aerospace industry. In keeping with this goal, each benefit program has been carefully devised. These benefits include time-off benefits, such as vacations and holidays, and insurance and other plan benefits. We are constantly studying and evaluating our benefits programs and policies to better meet present and future requirements. AerSale - Non-Licensed Aircraft Mechanic Location: open to all sites Pay: $24-$36/hr DOE Travel Pay: $500 Referral Bonus: $250 Tools Required Open to Military Experience About the Role AerSale is seeking skilled Non-Licensed Aircraft Mechanics to support inspection, repair, modification, and overhaul of commercial and cargo aircraft. This position works in a high-volume MRO environment with hands-on tasks across multiple aircraft platforms. Candidates with strong mechanical aptitude-whether from aviation, military, automotive, diesel, or related fields-are encouraged to apply. Key Responsibilities Perform routine and non-routine aircraft maintenance tasks under the supervision of licensed personnel. Assist in troubleshooting, component removals/installs, and system repairs. Follow maintenance manuals, technical data, and work instructions. Complete task documentation accurately and ensure work meets FAA and company standards. Use hand tools, power tools, and ground support equipment safely and correctly. Maintain a clean, organized, and safety-focused work environment. Support A&P mechanics, inspectors, and leads as needed to meet production goals. Qualifications Previous mechanical experience required; aviation or military preferred. Ability to read and understand basic aircraft manuals and technical instructions. Familiarity with safe use of aircraft tools and equipment. Must supply own basic toolset. Ability to work overtime and adapt to changing priorities in a fast-paced MRO setting. High school diploma or equivalent. Why Work with Us Competitive hourly pay: $24-$36/hr DOE $500 travel pay for eligible travelers $250 referral bonus Long-term MRO opportunity with advancement potential Work with a respected aviation maintenance organization across multiple aircraft platforms Supportive environment open to candidates transitioning from military or other mechanical industries

Are you eager to be part of an innovative team in the aviation industry, transforming the way we approach aviation technology? Our client stands as a prominent figure in the realm of aircraft window design, manufacturing, and the production of composite parts at their cutting-edge facility. Boasting ISO 9001:2015 / AS9100D certification, they specialize in aerospace window/windshield composite intricacies, sheet metal wing spars, and fuselage assemblies. They are currently on the lookout for a Regional Repair Sales / Aircraft Window Technician possessing an A&P License in locations including Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC. What's in It for You: Salary: $45,000-$60,000 annual bonus, potential for substantial monthly incentives Position Type: Permanent - Full-time. Benefits: Comprehensive package including Medical, Dental, 401k, Disability, Company-provided life insurance, and FSA. A Glimpse into the Life of an Aircraft Technician / A&P Mechanic: As the Aircraft Technician / A&P Mechanic, your primary mission is to provide aircraft window services to our existing clients while expanding our customer base and sales within your designated Regional Market. Your responsibilities include inspecting aircraft windows, assessing defects for airworthiness, repairing scratches, pits, and other window damage, as well as removing and installing replacement windshields and windows. Key Responsibilities: Removing existing windows. Preparing and installing new windows. On-call 24/7 to respond to customer requests for emergency AOG (Aircraft on Ground) services. Utilizing an orbital sander with various grits of sandpaper to restore damaged areas. Reviewing, interpreting, and applying technical data relevant to your tasks. Managing the acquisition of purchase orders from customers as per the provided quotes. Coordinating service schedules with aircraft owners/operators and maintenance managers. Completing and submitting billing information and evaluation forms to our headquarters in Wichita, KS. Providing the necessary airworthiness documents to customers upon job completion. Traveling as required to customer locations via ground transportation, air travel, or airlines. Compiling weekly expense reports detailing costs for gasoline, entertainment, and customer relations. Signing off on all work orders and maintaining part traceability records. Conducting daily visits and/or phone communication with both current and potential customers. Developing and expanding sales in the assigned Regional Market. Seeking guidance and direction as needed for your duties. Keeping your supervisor/manager informed of the status of your work. Reporting problems and potential issues to your supervisor/manager as soon as possible. Maintaining a neat and orderly work area. Presenting a well-groomed appearance suitable for the role and context. Respecting the confidentiality of company, customer, and personnel information. Performing additional duties and tasks as assigned by your supervisor. Assisting and training other employees as required. Qualifications: Education: High School Diploma/General Education Degree (GED). Experience: Preferred sales experience, 1 year of orbital sanding experience preferred, auto body experience preferred, previous aircraft experience preferred, A&P license or AMT certificate preferred, sales experience preferred. Technical Skills: Proficiency in using various measuring devices, strong mechanical aptitude, ability to read and interpret blueprints (preferred), ability to read and interpret technical manuals. Problem Solving/Decision Making: Ability to read and comprehend mechanical and technical manuals, applying them to practical field situations. Capability to work independently and communicate effectively with both internal and external customers, delivering exceptional customer service in a timely manner. Essential Job Functions/Physical Demands: The physical demands encompass standing on wings, moving in and out of cockpits, and working inside and outside aircraft. Travel is a requirement, with working hours ranging from 2 to 12 per day depending on demand. Ability to stand and/or sit for 8 hours a day. Ability to lift/carry weights of up to 70 lbs. Ability to twist, bend, and stoop for 8 hours a day. Ability to pinch and grip various tools with fingers and hands, using pushing and pulling motions for 8 hours a day. Ability to reach for 8 hours a day. Clear and effective communication skills. Proficiency in understanding and following work orders and process specifications. Capability to handle buffing and polishing tools for 8 hours a day. Comfort with climbing up and down ladders. If you're intrigued by the Aircraft Technician / A&P Mechanic role in Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC, seize the opportunity today! This job opportunity is presented by Total Aviation Staffing, LLC, an Employment Agency providing aviation staffing services.

Full-time Description Maintenance Technicians are responsible to the Maintenance Supervisor and shall assure that the procedure outlined in this manual as well as all FAA Regulations and manufacturer's instructions are complied with. In addition to all responsibilities listed below, work involves the responsibility of performing routine maintenance, and major inspections on HondaJet, Piper, TBM, Pilatus, LearJets, Beechjet, Citations and other corporate aircraft. Troubleshooting, repair, and modification of aircraft systems and engines is accomplished by this position. In addition, component removal and reinstallation, operational checks, leak checks, and engine runs are all within the responsibility of the AMT. The AMT is responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution. Essential Functions and Responsibilities: Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator. Responsible for planning and coordinating the activities of their shop or area, so as to minimize delays and increase production and efficiency. Ensure that all work accomplished will be completed in strict accordance with the manufacturer's maintenance and repair instructions and TITLE 14 CFR part 43. Exercise all reasonable care to protect all parts- sub assembles; major assembles and completed units against loss or damage. Ensure that all applicable repair station forms utilized are properly completed. Ensure good housekeeping rules are observed and that all shop-working areas are kept clean and orderly at all times. Ensure that proper tools and equipment are available and those tools are maintained in serviceable condition and ensure that any tool which is found unserviceable for any reason will be removed from service. He will be responsible for good housekeeping and will ensure that housing and facilities and safety precautions are adequate. Ensure proper handling of parts and the preservation of all units or parts during the work process through the maintenance department. Required to be thoroughly familiar with the requirements of the repair station manual, FAA Regulations, Airworthiness Directives and Advisory Circulars, Manufactures Service Letters/Bulletins and engineering orders. Communicates with the maintenance lead technicians concerning progress of the assigned work. Perform airframe and powerplant repairs, inspections and modifications. Removal and disassembly of defective parts, assembly and installation of replacement parts and testing of system. Interpret technical manuals, drawings and blueprints. Ensure that all discrepancies are signed off with all the information completed, such as part numbers, maintenance manual, ATA and Chapter, etc. Displays and promotes a positive attitude toward work and other employees. Use experience and technical expertise to assist when necessary to meet completion and production schedules and produce the quality our company has come to expect. Assure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks. Identify any employees' problems and concerns and deal with them, if unable to solve the problems, forward them to management. Technicians shall have all their work inspected (except for off-site maintenance, see off-site maintenance requirements) by an appropriately rated inspector as listed on the Roster of Management Supervisory and Inspection Personnel at the completion of each task. Participates with management to strategize and implement new maintenance tactics. Provide leadership and communication to subordinates and employees. Performs related work as assigned. Requirements Education: Five or more years related experience and/or training; or equivalent combination of education and experience. Airframe and Powerplant (A&P) Certificate (Preferred). Experience: Five or more years demonstrated experience in aircraft maintenance inspections and repairs. Strong understanding in 135 and 145 repair station operations/regulations required. Minimum Work Experience Requirement: Clean driving record. Able to pass a background check. Ability to pass a drug screening test. Willing to work weekends, if needed. Willing to work off location, if needed. Ideal candidate will have the following work styles: Attention to detail. Persistence in the face of obstacles. A willingness to take on responsibilities and challenges. Being reliable, responsible, and dependable, and fulfilling obligations. Being pleasant with others on the job and displaying a good-natured, cooperative attitude. Being sensitive to others' needs and feelings and being understanding and helpful on the job. Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods. Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations. Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace. Results oriented Proven ability to achieve goals. Follows through and meets deadlines; Strong organizational, multi-tasking and time management skills; Strong problem-solving and analytical skills. Communication Oral Communication speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Participates in meetings. Written Communication Writes material in clear concise terms. Salary Description $22 - $35/HR, DOE

* Maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and shears. This job requires working knowledge of technical publications and shall be required to make entries in aircraft logs and records. The incumbent receives technical guidance, as required, from supervisor or higher-level technician. Military experience a plus. Minimum Experience Requirements: * 3-5 years turbine powered UH-60 Blackhawk experience * Must have training on UH-60 PMI phase inspections * Must be able to follow engine and component overhaul manuals * Prefer two years of experience performing maintenance checks/multi-engine * FAA Airframe & Powerplant License Preferred * UH-60 Crew Chief Flight background Preferred * Recent CAN experience is a plus * Must be able to work indoors and outdoors. * Able to lift and carry at least 50 lbs * FAA Airframe and Powerplant License Preferred. * Class D Driver License * Must pass physical and Drug test * MUST be able to obtain a Secret Clearance * Must have own tools/toolbox Duty Hours M-TH or Tu-FRI 6:30-5:00 PM [ Off Monday or Friday] Benefits Available Employee & Family Health, Dental, and Vision Insurance Options $50,000/$100,000 Life/AD&D Insurance and 24/7 Teledoc Svcs Retirement Savings Plan (similar to a 401(k) Employee Assistance Program (EAP) Cash Equivalent Benefits Paid Federal Holidays Paid Sick Leave Paid Vacation Other benefits may include, but not be limited to: a variety of other Personal Leave days off, Uniform and PPE provisions, paid training, performance awards, and occasional meal, beverage, or snack accommodations. (Please Note: Not all benefits will apply, based on a variety of factors, i.e., opt out and plan provisions, etc.) LOGMET is an Affirmative Action and Equal Opportunity Employer: we welcome and encourage all individuals, including veterans and individuals with disabilities, to apply! If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact LOGMET's Human Resources Department Manager directly: *************, **************, Ext.4 We sincerely appreciate your consideration; please feel free to contact LOGMET's HR Department anytime, with any questions you may have.

The Aircraft Mechanic I (Sheetmetal/Structural Specialty) AH-64 troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. · Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. · Reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. · Performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. · Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. · Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. · Adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. · Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. · Knowledge of equipment related to individual requirements (AH-64). · Knowledge of military publications (including electronic manuals), drawings, blueprints, microfilm, diagrams, and schematics is mandatory. · Knowledge of military and/or company forms required by work specifications is a plus. · Perform other duties as required. Minimum Requirements · Knowledge of equipment related to individual requirements (AH-64) · Knowledge of military publications (including electronic manuals), drawings, blueprints, microfilm, diagrams, and schematics is mandatory. · Is required to climb, stand, stoop, bend, stretch, crouch, and work in tiring and uncomfortable positions. · Required three (3) years aviation maintenance experience, two (2) years rotary wing aircraft experience, and two (2) years on the assigned Mission Design Series (MDS) (AH-64). · All experience must be within the six most recent years. · A valid up-to-date A&P license is preferred but not required. · All mechanics assigned to perform maintenance on FAA certified aircraft must meet FAA requirements. · Valid Driver's License · Must provide own tools/toolbox. Tools must be shadowed and etched with PID. · High School Diploma or Equivalent required. Clearance Requirements: · Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. · Must be able to obtain and maintain facility credentials/authorization. · US Citizenship is required for facility credentials/authorization to work at this facility. Physical/Preferred Requirements: · Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Is exposed to disagreeable fumes and to cuts and bruised from using tools in close placed and hazards of moving vehicles such as forklifts in shop area. · While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. · The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions. · The employee is occasionally required to sit, climb, or balance. · Frequently lifts items weighing 15-25 pounds and occasionally in excess of 45 pounds. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Job DescriptionAre you eager to be part of an innovative team in the aviation industry, transforming the way we approach aviation technology?Our client stands as a prominent figure in the realm of aircraft window design, manufacturing, and the production of composite parts at their cutting-edge facility. Boasting ISO 9001:2015 / AS9100D certification, they specialize in aerospace window/windshield composite intricacies, sheet metal wing spars, and fuselage assemblies.They are currently on the lookout for a Regional Repair Sales / Aircraft Window Technician possessing an A&P License in locations including Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC.What's in It for You:Salary: $45,000-$60,000 annual bonus, potential for substantial monthly incentives Position Type: Permanent - Full-time. Benefits: Comprehensive package including Medical, Dental, 401k, Disability, Company-provided life insurance, and FSA.A Glimpse into the Life of an Aircraft Technician / A&P Mechanic:As the Aircraft Technician / A&P Mechanic, your primary mission is to provide aircraft window services to our existing clients while expanding our customer base and sales within your designated Regional Market. Your responsibilities include inspecting aircraft windows, assessing defects for airworthiness, repairing scratches, pits, and other window damage, as well as removing and installing replacement windshields and windows.Key Responsibilities: Removing existing windows. Preparing and installing new windows. On-call 24/7 to respond to customer requests for emergency AOG (Aircraft on Ground) services. Utilizing an orbital sander with various grits of sandpaper to restore damaged areas. Reviewing, interpreting, and applying technical data relevant to your tasks. Managing the acquisition of purchase orders from customers as per the provided quotes. Coordinating service schedules with aircraft owners/operators and maintenance managers. Completing and submitting billing information and evaluation forms to our headquarters in Wichita, KS. Providing the necessary airworthiness documents to customers upon job completion. Traveling as required to customer locations via ground transportation, air travel, or airlines. Compiling weekly expense reports detailing costs for gasoline, entertainment, and customer relations. Signing off on all work orders and maintaining part traceability records. Conducting daily visits and/or phone communication with both current and potential customers. Developing and expanding sales in the assigned Regional Market. Seeking guidance and direction as needed for your duties. Keeping your supervisor/manager informed of the status of your work. Reporting problems and potential issues to your supervisor/manager as soon as possible. Maintaining a neat and orderly work area. Presenting a well-groomed appearance suitable for the role and context. Respecting the confidentiality of company, customer, and personnel information. Performing additional duties and tasks as assigned by your supervisor. Assisting and training other employees as required. Qualifications: Education: High School Diploma/General Education Degree (GED). Experience: Preferred sales experience, 1 year of orbital sanding experience preferred, auto body experience preferred, previous aircraft experience preferred, A&P license or AMT certificate preferred, sales experience preferred. Technical Skills: Proficiency in using various measuring devices, strong mechanical aptitude, ability to read and interpret blueprints (preferred), ability to read and interpret technical manuals. Problem Solving/Decision Making: Ability to read and comprehend mechanical and technical manuals, applying them to practical field situations. Capability to work independently and communicate effectively with both internal and external customers, delivering exceptional customer service in a timely manner. Essential Job Functions/Physical Demands: The physical demands encompass standing on wings, moving in and out of cockpits, and working inside and outside aircraft. Travel is a requirement, with working hours ranging from 2 to 12 per day depending on demand. Ability to stand and/or sit for 8 hours a day. Ability to lift/carry weights of up to 70 lbs. Ability to twist, bend, and stoop for 8 hours a day. Ability to pinch and grip various tools with fingers and hands, using pushing and pulling motions for 8 hours a day. Ability to reach for 8 hours a day. Clear and effective communication skills. Proficiency in understanding and following work orders and process specifications. Capability to handle buffing and polishing tools for 8 hours a day. Comfort with climbing up and down ladders. If you're intrigued by the Aircraft Technician / A&P Mechanic role in Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC, seize the opportunity today!This job opportunity is presented by Total Aviation Staffing, LLC, an Employment Agency providing aviation staffing services.