Aircraft mechanic jobs in Towson, MD

General Job Information There is only one city in the country that can say it is the Nation's Capital - Washington, D.C. Given that distinction, The Metropolitan Police Department is the premiere law enforcement organization in the city. We receive over 22 million visitors a year, have almost 700,000 residents, and 21,000 private business. The Department consists of more than 4,200 members: approximately 3,550 sworn members and over 650 civilian employees. We are one of the most diverse and highly trained departments in the country. We have the honor of safeguarding and protecting not only our nation's residents, but also people from all over the world. The Metropolitan Police Department (MPD) offers an attractive benefits package. The benefits package includes competitive compensation, health insurance, prescription drug coverage, dental, vision, short and long term disability and life insurance, as well a strong retirement benefit and savings options. Employees are also eligible for our employer contributed 401a plan after one year of employment. Additional perks such as discounts on wireless carriers, gym memberships, amusement park tickets and much more! Additional information can be found at: DCHR Benefits This position is located in the Metropolitan Police Department (MPD), Homeland Security Bureau (HSB), Special Operations Division (SOD), Air Support Unit (ASU). The ASU maintains and certifies all aircraft for suitability. The primary purpose of this position is to ensure the air worthiness of departmental aircrafts by performing a wide array of work involving aviation maintenance and repairs. This Aircraft Mechanic position is covered under the National Association of Government Employees (NAGE) bargaining unit and you may be required to pay an agency fee through direct payroll deductions. The incumbent will be responsible for the following: * Ensures the airworthiness of MPD aircraft, including disassembly, repair, overhaul, inspection, and modification of helicopters, to include major assemblies, sub-assemblies, components, and related systems. * Monitors and ensures compliance with all inspections and airworthiness directives as required by the Federal Aviation Administration (FAA) and the aircraft manufacturer. * Conducts inspections, diagnoses malfunctions, and troubleshoots to determine aircraft malfunction and other technical problems. * Performs operational checks of systems using external power sources, powered ground equipment or functional tests. * Removes, disassembles, inspects, repairs, adjusts, overhauls, modifies, reassembles, and installs or replaces major assemblies, sub-assemblies, components and systems, such as, hydraulic pump assemblies, main and tail rotor assemblies, drive shafts, transmissions, gearboxes, and other powertrain units, cooling fan assemblies, control valves, etc. Installs, connects and adjusts fuel, electrical and hydraulic systems. * Applies theory, operation, and integration of all mechanical, hydraulic, electrical, and other operating systems to troubleshoot malfunctions from pilots and flight crew reports of any discrepancies; as well as from observations during inspections and run-ups. * Applies the start up, operation, shutdown, and emergency procedures for the systems and the aircraft to determine symptoms of normal and abnormal operation, inter-relationships between operating systems, and any applicable safety procedures to prevent damage to equipment or injury to personnel. * Interprets technical data and guidelines, makes recommendation for additions to guidelines and the safety and housekeeping of the aircraft and work area; recognizes unsafe maintenance conditions and grounds aircraft when appropriate. * Installs and aligns fuselage and airframe parts; builds up, balances, aligns, and installs main and tail rotor assemblies. Performs temporary and permanent repairs to airframes and operates ground-handling equipment to move aircraft around the work and flight line areas. * Determines when to assign aircraft to the vendor for repairs and replacements; performs a quality assurance check to ensure that work is done correctly and aircraft is ready to return to service. * Accompanies the ASU crew to outside maintenance facilities when needed. * Performs pre-flight, daily and post-flight inspections and conducts operational checks on aircraft systems, to include accompanying pilot on test flights of aircraft to make visual and audio checks of the aircraft. Performs operational ground checks, makes final adjustments, tracks main and tail rotor blades, adjusts the pitch of blades, checks oil, fuel pressure, and vibration and makes required adjustments as necessary. * Attends all mandatory aircraft inspection and repair training. * Performs other related duties as assigned. Qualifications * Skill and a thorough knowledge of the make-up, operation, interrelationships, and installation of a variety of rotary wing aircraft systems, assemblies, structures, and surfaces. * Skill to diagnose malfunctions throughout these systems, assemblies, and surfaces and determine whether repair or replacement is needed. * Experience as a technical expert and authority as a helicopter mechanic. * Skill in the removal, replacement, and adjustment of various systems, assemblies, surfaces, or any components/parts, and in functional testing. * Skill in the use and readout of powered ground equipment, test stands, and cockpit instruments and gauges. * Skill in the use of tools common to the aircraft trade to determine the extent of repairs. * Experience in aircraft malfunctions and technical problems troubleshooting. * Skill in connecting, meshing, aligning, and adjusting the surfaces, assemblies, and systems with one another. * Proficient in the use of Tracware, Access Software AIRPAX, maintenance record software CALM, and aircraft log manager; Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Licensures, Certifications and other requirements Successful completion of a training program in airframe and powerplant mechanics, or similar, through the Federal Aviation Association (FAA) is required. FAA Certified Mechanic in Airframe and Powerplant is required. Education Bachelor degree in a related field of study, preferred. Work Experience Three (3) years of relevant experience in Turbine Helicopter maintenance and repair is required. Work Environment Work is performed in varied settings and environmental conditions associated with flight line/airport/heliport/off base operations. Dirt, grease, and dust are often present. Aircraft fluids, such as oil and hydraulic fluids may irritate the eyes or skin. Flight line aircraft maintenance duty is inherently dangerous, and requires adherence to safety procedures. Mechanics are subject to cuts, bums, electrical shocks, strains, etc. Subject to exposure to high frequency and high-intensity noises that require wearing hearing protection. Other Significant Factors Promotion Potential: No Known Promotion Potential This position operates within the confines of a 24/7 operation. Incumbent of this position is required to provide after-hours on call technical support including weekends and holidays. Incumbent may also be subjected to rotating shifts, weekend work and changes in days off. This position is deemed as "Safety Sensitive" pursuant to Chapter 4 of the D.C. Personnel Regulations, in addition to the general suitability screening, individuals applying for or occupying security sensitive positions are subject to the following checks and tests: * Criminal background check; * Traffic record check (as applicable); * Consumer credit check (as applicable); * Reasonable suspicion drug and alcohol test; and * Post-accident or incident drug and alcohol test. A background investigation is required for positions with the Metropolitan Police Department. The incumbent is required to possess and maintain a valid motor vehicle operator's permit. The District of Columbia Government is an Equal Opportunity Employer: all qualified candidates will receive consideration without regard to race, color, religion, national origin, sex, age, marital status, personal appearance, sexual orientation, gender identity or expression, family responsibilities, matriculation, political affiliation, genetic information, disability. Sexual harassment is a form of sex discrimination, which is also prohibited. In addition, harassment based on any of the above-protected categories is prohibited. Click here to review additional information Employee Disclosure & Information for Applicants

We are seeking an experienced Aircraft Maintenance Technician to join our team. The ideal candidate will have an A&P Certificate, basic computer skills, and typing proficiency. An IA Preferred certification is also preferred. Responsibilities: • Work as a member of a three to four-man crew to perform inspections, maintenance, troubleshooting, and/or installations on aircraft as directed by the Team Leader. • Complete assigned tasks in a safe and accurate manner. • Perform tasks using the appropriate parts and in accordance with appropriate manufacturers' instructions or as prescribed by the Team Leader. • Maintain adherence to the operating parameters of the Skytech, Inc. Repair Station Manual. • Properly document work completed, parts removed, parts requested, or on-the-job training received. • Accountable for time expenditures on jobs in progress, with accurate time tracking. Requirements: • A&P Certificate • Basic computer skills and typing proficiency • IA Preferred certification preferred • Ability to work in a team environment • Strong attention to detail • Ability to work in a fast-paced environment • Excellent communication skills If you meet the above requirements and are passionate about aircraft maintenance, we encourage you to apply for this exciting opportunity.

How you'll help us Keep Climbing (overview & key responsibilities) The Aircraft Maintenance Technician (AMT) is a critical TechOps role at Delta. In this role, you will maintain the proper and safe functioning of Delta's fleet, ensuring customers have an exceptional travel experience. AMTs maintain aircraft, aircraft engines, and aircraft components and avionics systems according to Delta and FAA specifications; perform inspections during assembly of parts and after repair or installation of components; document maintenance procedures including component damage, origin, and condition; and practice safety conscious behaviors in all operational processes and procedures. Summary of responsibilities (not comprehensive of all tasks): + Performs all work activities in accordance with established laws, regulations, standards, safety protocols, and procedures to ensure safety of self and others. + Inspects aircraft or aircraft components, including landing gear, hydraulic systems, tires, and engines for damage, defects, corrosion, or other wear to ensure airworthiness. + Recommends replacement, repair, or modification of aircraft equipment based on inspection. + Reports issues, malfunctions, unusual wear, or damage to appropriate personnel, as required. + Installs, removes, or modifies aircraft structures, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications. + Repairs worn, defective, or damaged parts or components (e.g., damaged gaskets, lines and couplings, cables, and pulleys), using hand tools, gauges, and testing equipment. + Inspects completed work to certify that maintenance adheres to standards and procedures, and that aircraft are ready for operation. + Interprets discrepancies or logs (written or verbal) to understand history and nature of issue, to troubleshoot issue, and to identify required next steps (e.g., fix, defer, replace). + Researches, reads, and interprets technical manuals and guidelines to perform inspections, installations, repairs, or other work activities. + Reviews maintenance records to determine if service and maintenance checks, repairs, and overhauls were performed at prescribed intervals. + Maintains repair logs, documenting all preventative and corrective aircraft maintenance activities. + Serves as a technical expert or mentor by providing advice and corrective recommendations to others. + Uses computers, computer systems, and other technology to enter, document, access, receive, or communicate information. What you need to succeed (minimum qualifications) + Must have an FAA Airframe and Power Plant license + Must have valid driver's license + Must pass a DOT required pre-employment drug screen and thereafter submit to DOT mandated random drug and alcohol testing + Must read, write, speak, and understand English + _(If transferring internally)_ + Must be performing satisfactorily in present position + Demonstrates that privacy is a priority when handling personal data. + Consistently makes safety and security, of self and others, the priority. + Embraces diverse people, thinking, and styles. + Possesses a high school diploma, GED, or high school equivalency. + Is at least 18 years of age and has authorization to work in the United States. What will give you a competitive edge (preferred qualifications) + One year of full-time work experience + Prior military experience + Prior work experience in the airline industry + Status as a current Delta employee + One year of mechanical experience (outside of educational experience) + One year of aircraft maintenance experience (outside of educational experience) + One year of heavy jet maintenance experience (outside of educational experience) + Prior electronics/avionics experience or FCC license Benefits and Perks to Help You Keep Climbing Our culture is rooted in a shared dedication to living our values - Care, Integrity, Resilience, Servant Leadership, and Teamwork - every day, in everything we do. At Delta, our people are our success. At the heart of what we offer is our focus on Sharing Success with Delta employees. Exploring a career at Delta gives you a chance to see the world while earning great compensation and benefits to help you keep climbing along the way: + Competitive salary, industry-leading profit sharing program, and performance incentives + 401(k) with generous company contributions up to 9% + Paid time off including vacation, holidays, paid personal time, maternity and parental leave + Comprehensive health benefits including medical, dental, vision,short/long term disability andlife benefits + Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages + HolisticWellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health + Domestic and International space-available flight privileges for employees and eligible family members + Career development programs to achieve your long-term career goals + World-wide partnerships to engage in community serviceand innovative goals created to focus on sustainability andreducing ourcarbon footprint + Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies + Recognition rewards and awards through the platform Unstoppable Together + Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare Starting pay: $43.47 per hour Delta Air Lines, Inc. is an Equal Employment Opportunity / Affirmative Action employer and provides reasonable accommodation in its application process for qualified individuals with disabilities and disabled veterans. If you are a qualified individual, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings through this site, apply for jobs through Delta's online system, or at any point in the selection process. To request a reasonable accommodation, please click here

Provide dedicated support to a Program Element Monitor within the Secretary of the Air Force, Special Programs (SAF/AQL) advanced aircraft and survivability portfolio Execute analysis of technologies for associated or one-of-a kind systems to include system acquisition and life cycle management for planning, programming, budgeting, program execution and security policy Collaborate with diverse organizations and agencies to innovate and achieve cooperative agreements to leverage and drive solutions to challenging cross cutting problems Provide acquisition oversight and support portfolio management activities including working groups and integrated product teams 20+ years of relevant DoD work experience, including experience on aircraft development or operations, survivability related programs, research, and acquisition No less than five years' total experience and one within the last five years in a Special Access Program and/or SCI environment (REQUIRED) DoD 5000. 02 acquisition experience on one or more ACAT I and/or ACAT II acquisition programs for research, development, test, evaluation, production, modernization or lifecycle acquisition and sustainment activities of a DoD program; international acquisition and/or foreign disclosure experience a plus Intrinsically motivated team player with a desire to learn including the personal maintenance of technical relevancy * MAJCOM level or higher Staff Experience Strong communications to include verbal and technical writing skills Bachelor's degree in a science, mathematics, engineering or related technical field Master of Science (MS) / Master of Engineering (ME) Degree DESIRED Acquisition Professional Development Program (APDP) - certified in Program Management, Engineering, IT and/or Test & Evaluation; Advanced or formerly Level 3 DESIRED TS/SCI with previous SAP experience required.

SSI is seeking an Advanced Aircraft Technologies SME (SETA) for a role in Washington, DC. As an Advanced Aircraft Technologies Subject Matter Expert, you will provide the U.S. Air Force with Systems Engineering and Technical Assistance (SETA) and Advisory and Assistance Services (A&AS) on-site to achieve technically sufficient, cost-effective, long-term, critical capabilities to support the war-fighting mission. This position is located on Joint Base Anacostia Bolling (JBAB) in SE Washington, DC, but will also collocate in-person with team members at the Pentagon in Arlington, VA, and Joint Base Andrews (JBA) in Maryland. Role and Responsibilities:· Provide dedicated support to a Program Element Monitor within the Secretary of the Air Force, Special Programs (SAF/AQL), advanced aircraft and survivability portfolio. · Independently contribute, collaborate, and at times present for the organization on high-visibility, mission-critical aspects of multiple programs.· Execute analysis of technologies for associated or one-of-a-kind systems to include system acquisition and life cycle management for planning, programming, budgeting, program execution, and security policy. · Use your in-depth Subject Matter Expert understanding to evaluate issues and provide recommendations up to the Director/GO/SES level regarding advanced aircraft design and mission, survivability, warfighter capability and requirements, DoD system acquisition, and policies of warfighting and security protecting advanced warfighter capabilities.· Collaborate with diverse organizations and agencies to innovate and achieve cooperative agreements to leverage and drive solutions to challenging cross-cutting problems.· Provide acquisition oversight and support portfolio management activities, including working groups and integrated product teams.· Interface utilizing secure methods and procedures with other DoD Services, Congress, industry, and other external offices and agencies.· Engage in cross-functional knowledge management and technical writing best practices, building team expertise.Required Qualifications: 20+ years of relevant DoD work experience, including experience on aircraft development or operations, survivability-related programs, research, and acquisition. Bachelor's degree in a science, mathematics, engineering, or related technical field. Master of Science (MS) / Master of Engineering (ME) Degree DESIRED. Acquisition Professional Development Program (APDP) - certified in Program Management, Engineering, IT, and/or Test & Evaluation; Advanced or formerly Level 3 DESIRED. No less than five years' total experience and one within the last five years in a Special Access Program and/or SCI environment (REQUIRED). DoD 5000.02 acquisition experience on one or more ACAT I and/or ACAT II acquisition programs for research, development, test, evaluation, production, modernization, or lifecycle acquisition and sustainment activities of a DoD program; international acquisition and/or foreign disclosure experience is a plus. Intrinsically motivated team player with a desire to learn, including the personal maintenance of technical relevancy. MAJCOM level or higher Staff Experience. Strong communications to include verbal and technical writing skills. TS/SCI with previous SAP experience required. $180,000 - $230,000 a year SSI has a target salary range: $180,000 - $230,000. The estimate displayed represents the typical salary range for this position based on experience and other factors. #ssi #weknowhowtobuildit #spacejobs Space Systems Integration provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Employee Referral Eligible Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We are seeking a highly skilled, self-motivated Industrial Plant Field Service Mechanic to serve as the mechanical backbone of our high-volume Ready-Mix concrete operations in the Southwest DC area. This is a mobile field role offering significant autonomy and the opportunity to be the expert on the mechanical health of multiple critical production facilities. The Challenge: High-Impact, Independent Maintenance As an Industrial Plant Field Service Mechanic, you will be dispatched across a territory using a fully equipped company service truck. Your mission is to proactively maintain and rapidly diagnose complex mechanical failures on Ready-Mix Plant equipment. You are not just fixing things; you are the primary technical expert responsible for maximizing production uptime. What You'll Do: Precision Rotating Equipment Service: Execute preventive maintenance (PM) and perform complex, precision repairs on screw conveyors, bucket elevators, mixer drums, and material pumps. Expertise includes bearing replacement, shaft alignment, belt/chain tensioning, and seal installation on rotating machinery. Batch Plant System Repair: Troubleshoot, repair, and replace components integral to the batching process, including material gates, pneumatic actuators, air compressors, and various types of feeders and scales. Heavy Component Rebuilds: Conduct scheduled maintenance and critical failure rebuilds on major processing equipment, including servicing agitator blades in mixers, replacing wear parts in screw conveyor troughs, and overhauling large water/slurry pumps. Fabrication and Structural Repair: Independently perform heavy-duty field welding (SMAW and/or GMAW) to repair and reinforce structural components, including hoppers, silos, chutes, and plant framing, ensuring compliance with Vulcan's rigorous safety and quality standards. Advanced Troubleshooting: Utilize hydraulic and pneumatic schematics to diagnose and repair control systems for flow gates, valves, and material delivery components. A basic understanding of electrical controls (LOTO procedures, motor diagnostics, sensor troubleshooting) is required to work seamlessly with our electrical teams. Predictive Maintenance (PdM): Implement and document lubrication schedules, track component wear, and utilize systematic inspection techniques to anticipate and prevent equipment failures. Safety Leadership: Proactively manage LOTO procedures and uphold OSHA and Vulcan safety standards as a non-negotiable priority on every job site. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience: 3 years of experience in industrial maintenance, preferably in Ready-Mix Concrete, asphalt, cement, or high-volume material handling environments. Technical Skill: Proven expertise in industrial mechanical repair, welding/fabrication, heavy hydraulics, and power transmission systems. Autonomy: Must be a disciplined self-starter, capable of managing a repair schedule across multiple locations with minimal direct supervision. Certification (Preferred): Relevant certifications in welding (e.g., AWS), industrial maintenance, or millwright work are a strong asset. Physical Ability: Must be comfortable working at heights, in confined spaces (e.g., inside mixers or silos), and outdoors in all weather conditions, with the ability to lift up to 50 lbs. What You'll Like About Us: Work-Life Balance. At Vulcan Materials Company, we are focused on improving our employees' work-life balance. We understand the impact of weekly fluctuating work hours or lack of hours for our full-time Ready-Mix employees. As part of our commitment, we have implemented a Year-Round 30-hour Weekly Guarantee to ensure our employees receive more consistent work hours and are not impacted when there is a lack of work due to weather or other business conditions. Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impact daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more from day 1 Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. Invest in your future with a top-tier retirement plan. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Access to continuous technical and safety training to advance your career path. Hourly Range: the hourly range for this role is between $23.88 - $35.00. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. (Based on verifiable skills and experience). Company Vehicle: Use of a fully-equipped service truck for all site travel. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters.

Job DescriptionHarvey Hottel is Hiring a Residential Installation Lead Mechanic! Pay: $30 - $45 per hour (based on experience and qualifications) Job Type: Full-time | Hourly Gaithersburg, MD About the Role Harvey W. Hottel, Inc. is looking for an experienced Residential Installation Lead Mechanic to join our Special Projects team. This position is ideal for a motivated HVAC professional with at least 5 years of experience and a valid HVAC Journeyman License. You'll be responsible for leading installation crews and delivering high-quality HVAC systems, with a strong focus on geothermal and hydronic installations. If you're dependable, detail-oriented, and passionate about craftsmanship, this is an opportunity to take the lead and grow with a company that has been trusted in the industry for decades. What You'll Do Lead and perform HVAC installations, specializing in geothermal and hydronic systems. Supervise and mentor installation crews to ensure safety, quality, and productivity. Review project plans, schedules, and specifications to deliver work on time. Troubleshoot and resolve installation challenges in the field. Collaborate with other trades and contractors to ensure smooth project execution. Maintain accurate documentation (work orders, time logs, installation reports). Represent Harvey W. Hottel, Inc. with professionalism on every job. Requirements Must Have Requirements: Minimum 5 years of residential HVAC installation experience. Valid HVAC Journeyman License. Hands-on expertise with geothermal and hydronic systems. Valid driver's license and clean driving record. Ability to pass a drug screen and background check. Nice to Have Requirements: New construction HVAC installation experience. Leadership experience mentoring or training junior technicians. Soft Skills & Customer Service Strong leadership and communication skills. Organized, detail-oriented, and self-motivated. Dependable with a strong sense of accountability. Excellent problem-solving and decision-making ability. Professional, courteous, and customer-focused at all times. Work Environment & Physical Requirements Indoor/outdoor work at residential and new construction sites. Exposure to heights, confined spaces, noise, and variable weather conditions. Frequent use of ladders, lifts, scaffolding, and PPE. Lift/carry 50-75 lbs; climb, kneel, bend, and work in attics/crawlspaces. Benefits Competitive hourly pay: $30 - $45/hour 401(k) with company match Health, dental, and vision insurance Health savings account Life insurance Paid time off, holidays, and sick leave Opportunities for career growth and advancement About Harvey W. Hottel, Inc. For decades, Harvey W. Hottel, Inc. has been a trusted name in HVAC, providing quality, reliable, and innovative solutions. Join our Special Projects team and be part of a company that values craftsmanship, teamwork, and customer satisfaction.

Job Type: Full-Time & Part Time License/Certification: Airframe and powerplant certificate (Required) Qualified candidates eligible for the bonus will hold a valid A&P certificate, strong troubleshooting skills, and have a minimum of 2 years of experience providing maintenance on corporate or commercial aircraft. Benefits: 401(k) Dental insurance Flexible schedule Health insurance HSA Paid time off Vision insurance Flexible Schedule, Paid Holidays, Vacation & Sick Time, Medical, Dental, and Vision Benefits after 30 days, 401K with a company match, Short- & Long-Term Disability, Group & Voluntary Life Insurance, and EOM training opportunities. Schedule: 3x12 4x10 Day shift Night shift Supplemental pay types: Bonus pay Signing bonus *** Signing bonuses available for qualified technicians with a minimum of three years of experience and corporate Aircraft AOG support. Legibility for the signing bonus is contingent upon meeting specific qualifications and experience levels. Terms and conditions apply *** Experience: Aircraft maintenance: 2 years (Required)

Line of Business: Aggregates About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Perform inspections, troubleshooting, and repairs on plant equipment and machinery Execute preventative maintenance to ensure operational reliability and safety Collaborate with operations teams to minimize downtime and optimize performance Operate hand and power tools, welding equipment, and mobile machinery as needed Adhere to safety protocols and contribute to continuous improvement initiatives What Are We Looking For Demonstrated ability to diagnose and resolve mechanical issues efficiently Familiarity with welding, fabrication, hydraulics, and heavy equipment Capable of following procedures and maintaining accurate maintenance records Adaptable to changing priorities and effective in a team-oriented environment Strong awareness of safety practices and risk mitigation Conditions of Employment Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check Must be legally authorized to work in the United States without sponsorship Work Environment Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. What We Offer $25 - $32 per hour 401(k) retirement savings plan with an automatic company contribution as well as matching contributions Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits Health Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA) AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance Paid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Job Description Demonstrates a commitment to communicating, improving and adhering to safety policies in all work environments and areas. · Inspects condition and operation of plant equipment and performs necessary repairs and adjustments. Reports required repairs or other findings to Area Manager. · Adheres to all safety, environmental and company policies and procedures in completing daily tasks, and completes all required paperwork in a timely fashion. · Completes work orders in a timely manner; installing, repairing and fabricating materials out of metal; ensuring availability and functioning of required items; and ensuring safety and resolving immediate safety concerns. · Assembling pieces of metal together or repairing damage in metal components using heavy machinery that emits high heat, melting the metal into shape. · Performs the appropriate plant equipment inspections, repairs and preventative maintenance for both fixed and mobile equipment. · Responsible for preparing and welding steel and aluminum structures, appendages and equipment. · Performs routine preventative maintenance on plant equipment including handling welding repairs. · Conducts routine inspections of plant and mobile equipment and report findings to Area Manager. · Prepares Plant reports as required and maintain an inventory of regularly used repair supplies or equipment. · Assists personnel as may be required for the purpose of supporting them in the completion of their work activities. · Responds to emergency situations as needed and/or assigned for the purpose of resolving immediate safety concerns. · Performs required emergency repairs on production equipment required to address plant breakdowns. · Performs repairs as required on plant processing equipment and performs maintenance on plant grounds as required. · Maintains shop, equipment, tools, vehicles, etc. for the purpose of ensuring the availability and functioning of required items and ensuring safety. · Rebuild or fabricate parts; repair electrical equipment. · Other duties as assigned. Requirements WHAT WE ARE LOOKING FOR · Education: High school diploma or equivalent · Required Work Experience: Minimum of 5 years' experience working in plant or industrial environment. · Proficient in hydraulic, electrical and pneumatic system · Certified Welder (CW, CW, CWE or CWRT) · Knowledge of hot work permit systems protocol · OSHA certified · Ability to read and understand blueprints · Excellent oral communication skills with close attention to detail · Required Computer and Software Skills: Basic computer skills · Ability to work in all weather conditions without limitations. · Ability to lift 50lbs · Reliable transportation · Licenses Required: N/A Additional Requirements: · Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. · Successful candidates must adhere to all safety protocols and proper use of Holcim approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Subject to applicable law, employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. Benefits Competitive salary · Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings · Medical, Dental, Disability and Life Insurance · Holistic Health & Well-being programs · Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care · Vision and other Voluntary benefits and discounts · Paid time off & paid holidays · Paid Parental Leave (maternity & paternity) · Educational Assistance Program · Dress for your day

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The Fuel Distribution System Mechanic receives, stores, transfers, logs fuel data. The Mechanic may inspect and assist with the repair of pipelines, hoses and other connecting systems. The Mechanic will gauge tanks for water, temperature and fuel levels, check pumping systems for correct operating pressure or unusual noises and perform preventative maintenance and repairs on assigned systems. Pay Rate: $32.52/hourly Work Model: Onsite/Office-based Responsibilities Essential Duties & Job Functions: * Observes and interprets readings on gauges, meters, and charts which register various aspects of fuel maintenance and delivery operations. * Adjusts controls to insure safe and efficient operation and to meet demands for fuel. * Cleans strainers, filters, fuel tanks and distribution lines removing corrosion and re-painting surfaces. * Lubricates pumps, and replaces gaskets, seals, and fuel filters as needed. * Corrects pumping misalignment and makes repairs to equipment; following prescribed methods. * Inspects and diagnoses problems to determine corrective repairs. * Completes all job-related paperwork and forms. * Uses a variety of hand tools, portable power tools, and standard measuring instruments. * Coordinates with other personnel in the identification of proper and correct materials, parts assemblies, and requirements for a variety of requisitions necessary for the job/task. * Performs on call, preventive and emergency site maintenance, as necessary. * Performs periodic stock inventories and prepares material requisitions. * Operates Government or company-owned motor vehicles and/or other equipment. * Supports and assists other department staff and trade groups as needed or directed. * Adheres to the established CFS safety and personnel policies and standard operating procedures. * Ability to work overtime as needed. * Performs other duties as assigned. Job Requirements Mandatory: * High school graduate or equivalent GED. * Five (5) years of experience in operation of fuel distribution systems including delivery, repair and maintenance. * Hold or obtain a Class A and B Fuel Certification (Underground Storage Tank - UST) within 90 days. * Ability to pass pre-hire background and drug screen. * U.S. Citizenship. * Ability to obtain and maintain the required intelligence community level clearance. * Valid state driver's license and suitable driving record. * Ability to lift 50 pounds and team lift 75 pounds. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any if its subsidiaries, please email ****************** Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status, or other characteristics protected by law.

Join our amazing team and contribute as a: Plant Mechanic ABOUT THE ROLE Amrize, a leading supplier of quality, construction building materials in the United States, has immediate openings for a Plant Mechanic to support operations at our Ft. Totten Plant located in NE, Washington D.C. This position will be responsible for the diagnosis, repair and maintenance of a wide variety of fixed electrical equipment, mechanical equipment, systems and machinery. Also maintain, install and repairs mechanical equipment and machinery. This position typically works from 6:00 a.m. until 6:00 p.m. Overtime will be required and shift may be adjusted for business needs WHAT YOU'LL ACCOMPLISH * Demonstrates a commitment to communicating, improving and adhering to safety policies in all work environments and areas. * Inspects condition and operation of plant equipment and performs necessary repairs and adjustments. Reports required repairs or other findings to Area Manager. * Adheres to all safety, environmental and company policies and procedures in completing daily tasks, and completes all required paperwork in a timely fashion. * Completes work orders in a timely manner; installing, repairing and fabricating materials out of metal; ensuring availability and functioning of required items; and ensuring safety and resolving immediate safety concerns. * Assembling pieces of metal together or repairing damage in metal components using heavy machinery that emits high heat, melting the metal into shape. * Performs the appropriate plant equipment inspections, repairs and preventative maintenance for both fixed and mobile equipment. * Responsible for preparing and welding steel and aluminum structures, appendages and equipment. * Performs routine preventative maintenance on plant equipment including handling welding repairs. * Conducts routine inspections of plant and mobile equipment and report findings to Area Manager. * Prepares Plant reports as required and maintain an inventory of regularly used repair supplies or equipment. * Assists personnel as may be required for the purpose of supporting them in the completion of their work activities. * Responds to emergency situations as needed and/or assigned for the purpose of resolving immediate safety concerns. * Performs required emergency repairs on production equipment required to address plant breakdowns. * Performs repairs as required on plant processing equipment and performs maintenance on plant grounds as required. * Maintains shop, equipment, tools, vehicles, etc. for the purpose of ensuring the availability and functioning of required items and ensuring safety. * Rebuild or fabricate parts; repair electrical equipment. * Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. WHAT WE 'RE LOOKING FOR Education: High school diploma or GED (required). Field of Study Preferred: Technical certification or degree in mechanical engineering, industrial maintenance, or a related field (preferred). Required Work Experience: Minimum 3 years experience * Lead a team of mechanics to ensure efficient and safe operations of quarry equipment. * Perform routine and preventive maintenance on crushers, conveyors, trucks, and other quarry machinery. * Troubleshoot and repair mechanical, electrical, and hydraulic equipment issues. * Oversee major equipment repairs and ensure minimal downtime. * Ensure compliance with safety regulations and company safety protocols. * Monitor and maintain inventory of tools, parts, and equipment for repairs. * Conduct regular inspections to assess the condition of all equipment and machinery. * Coordinate with quarry management on maintenance schedules and equipment needs. * Maintain accurate records of repairs, maintenance activities, and parts used. * Stay updated on new technologies and maintenance practices to improve efficiency and equipment reliability Additional Requirements: * Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER * Competitive salary * Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings * Medical, Dental, Disability and Life Insurance * Holistic Health & Well-being programs * Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care * Vision and other Voluntary benefits and discounts * Paid time off & paid holidays * Paid Parental Leave (maternity & paternity) * Educational Assistance Program * Dress for your day Did we spark your interest? Build your future with us and apply! HR Contact: Shaunta Mackell BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com. This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.

CT/HX is seeking an experienced Senior Controls Mechanic/Technician to maintain and repair cooling towers and plate and frame heat exchangers. The ideal candidate will have strong attention to detail, excellent communication skills, and solid knowledge of basic mechanic's tools, service, and diagnostic equipment. Key Responsibilities: Conduct maintenance and repairs, including electrical and control scopes. Communicate with customers to identify issues and provide solutions. Assemble mechanical parts per specifications. Diagnose and resolve equipment functionality problems. Maintain detailed work logs, repair records, and submit daily reports. Ensure cleanliness and safety of job sites and company vehicles. Perform assessments to prevent equipment inefficiencies. Lead and manage a team to ensure safety and quality of work. Knowledge, Skills & Abilities: Basic knowledge of Cooling Towers and Plate and Frame Heat Exchangers. Electrical and Controls: Drawing wiring diagrams, quality control inspections, system data analysis, equipment calibration, and electrical upgrades. Mechanical: Servicing drive trains, metal refinishing, heat transfer fill media, preventative maintenance, and filtration systems. Strong organizational skills, job site safety, and tool management. Excellent communication, teamwork, and leadership skills. What we Offer: Competitive pay and benefits package Comprehensive medical, dental and vision plans Life and Disability Insurance Retirement Savings: 401(k) plan with generous company match Paid Time Off (PTO) Base Pay: $25-$40/Hour Commensurate with experience. This range represents a general guideline; however, a number of factors are considered when determining base pay offers such as the scope and responsibilities of the positioning the candidate's experience, education, skills, and current market conditions. View all jobs at this company

Industrial Field Service Plant Mechanic - Ready Mix - 2500034K Description **Employee Referral Eligible** Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We are seeking a highly skilled, self-motivated Industrial Plant Field Service Mechanic to serve as the mechanical backbone of our high-volume Ready-Mix concrete operations in the Southwest DC area. This is a mobile field role offering significant autonomy and the opportunity to be the expert on the mechanical health of multiple critical production facilities. The Challenge: High-Impact, Independent MaintenanceAs an Industrial Plant Field Service Mechanic, you will be dispatched across a territory using a fully equipped company service truck. Your mission is to proactively maintain and rapidly diagnose complex mechanical failures on Ready-Mix Plant equipment. You are not just fixing things; you are the primary technical expert responsible for maximizing production uptime. What You'll Do:Precision Rotating Equipment Service: Execute preventive maintenance (PM) and perform complex, precision repairs on screw conveyors, bucket elevators, mixer drums, and material pumps. Expertise includes bearing replacement, shaft alignment, belt/chain tensioning, and seal installation on rotating machinery. Batch Plant System Repair: Troubleshoot, repair, and replace components integral to the batching process, including material gates, pneumatic actuators, air compressors, and various types of feeders and scales. Heavy Component Rebuilds: Conduct scheduled maintenance and critical failure rebuilds on major processing equipment, including servicing agitator blades in mixers, replacing wear parts in screw conveyor troughs, and overhauling large water/slurry pumps. Fabrication and Structural Repair: Independently perform heavy-duty field welding (SMAW and/or GMAW) to repair and reinforce structural components, including hoppers, silos, chutes, and plant framing, ensuring compliance with Vulcan's rigorous safety and quality standards. Advanced Troubleshooting: Utilize hydraulic and pneumatic schematics to diagnose and repair control systems for flow gates, valves, and material delivery components. A basic understanding of electrical controls (LOTO procedures, motor diagnostics, sensor troubleshooting) is required to work seamlessly with our electrical teams. Predictive Maintenance (PdM): Implement and document lubrication schedules, track component wear, and utilize systematic inspection techniques to anticipate and prevent equipment failures. Safety Leadership: Proactively manage LOTO procedures and uphold OSHA and Vulcan safety standards as a non-negotiable priority on every job site. Additional Responsibilities. Other duties as assigned. Qualifications Skills You'll Need:Experience: 3+ years of experience in industrial maintenance, preferably in Ready-Mix Concrete, asphalt, cement, or high-volume material handling environments. Technical Skill: Proven expertise in industrial mechanical repair, welding/fabrication, heavy hydraulics, and power transmission systems. Autonomy: Must be a disciplined self-starter, capable of managing a repair schedule across multiple locations with minimal direct supervision. Certification (Preferred): Relevant certifications in welding (e. g. , AWS), industrial maintenance, or millwright work are a strong asset. Physical Ability: Must be comfortable working at heights, in confined spaces (e. g. , inside mixers or silos), and outdoors in all weather conditions, with the ability to lift up to 50 lbs. What You'll Like About Us: Work-Life Balance. At Vulcan Materials Company, we are focused on improving our employees' work-life balance. We understand the impact of weekly fluctuating work hours or lack of hours for our full-time Ready-Mix employees. As part of our commitment, we have implemented a Year-Round 30-hour Weekly Guarantee to ensure our employees receive more consistent work hours and are not impacted when there is a lack of work due to weather or other business conditions. Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impact daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more from day 1Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. Invest in your future with a top-tier retirement plan. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Access to continuous technical and safety training to advance your career path. Hourly Range: the hourly range for this role is between $23. 88 - $35. 00. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. (Based on verifiable skills and experience). Company Vehicle: Use of a fully-equipped service truck for all site travel. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters. Job: Equipment Maintenance Primary Location: District of Columbia-Washington Organization: GM - VA/MD/PA/DE Schedule: Full-time Job Posting: Nov 21, 2025, 4:06:19 PM

Coho Technology Solutions is seeking a Boiler Plant Mechanic who will independently provide support to satisfy the overall operational objectives of the execution of NAVFAC Washington's broad and diverse mission of facilitating inter-governmental operational requirements. This position will provide boiler plant operator labor support to various locations within the NAVFAC Washington Area of Responsibility performing various tasks/services outlines below. This role is a 1 st Shift (8:00am-4:00 P.M.) with a rotating day off schedule. Hiring location NSA, Bethesda, MD. Responsibilities (include but are not limited to) : Operates all equipment in a boiler plant to produce and control the amount of steam necessary to meet demands. These demands are significantly affected by the large amounts of steam or high pressure temperature water provide by the boiler plant. Ignites fires, puts boilers in service, and closes down boilers. Periodically makes rounds of the plant to visually check equipment to see that is operating properly. Maintains constant observation of flow meters and charts to determine how much steam is being produced, whether it is meeting or exceeding demands, how much fuel is being used, etc. Fires up to take boilers off the line. Determines whether to up or lower fires in boilers, whether to use pressure reducing valves, whether water pumps should be started or stopped and for how long. Adjusts firing controls, fuel feeds, and air drafts for best combustion efficiency. Operates numerous auxiliary equipment, such as pumps, water heaters, fans, and de-aerating equipment. Collects samples of boiler water, performs prescribed tests, and determines amount of chemicals to be fed into boilers for treatment of water and control of corrosion and chemical concentrations. Maintains constant observation for defects in the system. In the event problems arise, either repairs malfunctions or notifies the supervisor. Follows standard emergency procedures until trouble can be corrected. Maintains logs, records, and other plant data as required. Performs routine operational maintenance, e.g., cleans burners, oils and grease moving parts, packs valves and pumps, cleans oil strainers, etc. May be required to locate and repair limited electrical problems in oil burning controls, safety devices, etc. Operates various types of air conditioning and cooling systems. Starts stops and adjusts equipment. Regulates refrigerant, water temperatures and pressures by manipulating appropriate switches, rheostats, valves and levers. Tours the plant making minor repairs, oiling and greasing equipment, thawing frozen valves, replacing fuses and defective recording devices. Maintains log of plant equipment and keeps all machinery and spaces clean. Contractor shall have knowledge of the location and function of all equipment controls, meters and gauges in the plant, and experienced skill to determine appropriate action to meet significantly complex demands. Contractor shall have knowledge of prescribed tests and chemicals to test and treat boiler water. Knowledge of drawings and circuit diagrams of the boiler plant and auxiliary equipment to quickly locate defects in the system and perform minor repairs. Thorough knowledge of the fuels used, the chemical reactions involved combustion, and the proper fuel air ratio needed for maximum efficiency. Comprehensive knowledge of maintenance requirements and the procedures or adjustments required controlling pollutants. Independently plans and carries out the work in accordance with established operating methods and procedures. Making complex determinations due to the amounts of steam or high temperature water provided by the plant. The work is shall be checked through occasional observation for adherence to operating techniques and established procedures. Employees' work schedules will be compatible with the Government's operating hours at the facility in which work is to be performed. This position may require shift work. Work on all shifts may be ordered, including weekends and holidays. Requirements: Education: Boiler operator must have a Class 1 Boiler Operator License in the States of Maryland, Virginia or Washington, D.C. Or, must have a Class 1 Boiler Operator License with American Society of Power Engineers (ASOPE) or National Institute for the Uniform Licensing of Power Engineers (NIULPE) Experience: Have a minimum of six (6) months experience in the operation of large (100 tons or more) air conditioning and/or refrigerant, or two (2) years' experience as an air conditioning equipment mechanic helper or apprentice. Demonstrated knowledge of repair, installation, assembly and troubleshooting of boiler plant systems. Demonstrated ability to interpret instructions, specifications, and guidelines used in boiler plant operations. Demonstrated ability to exercise dexterity and safety in using tools and equipment. Demonstrated ability to do the work of the position without more than normal supervision. Demonstrated ability to perform preventive maintenance. Demonstrated ability to operate safely. Demonstrated ability to work in confined areas in and around industrial equipment and support equipment, i.e., pumps, water heaters, fans, Unfired Pressure Vessels (UPVs), etc. Demonstrated ability to perform work that includes moderate to strenuous physical effort and long periods of walking, standing, climbing, bending, and crouching. Demonstrated ability to carry parts and equipment weighing up to 40 pounds unassisted and occasionally items weighing over 40 pounds with assistance of other workers or weight handling equipment. Demonstrated ability to work in areas that is subjected to high temperatures, constant noise, rotating machinery, soot, dirt, grease, chemicals, oil, and fumes. At a minimum, a record of completion for the OSHA 10-hour Construction Training Course is required. Position Pay Range$37.98-$40 USD About Copper River & The Native Village of Eyak: Owned by the Native Village of Eyak (NVE), a federally recognized Alaska Native Tribe, the Copper River Family of Companies are a collection of entities that deliver a complementary set of solutions and services to support the diverse missions and requirements of our clients. Proud participants of the Small Business Administration's (SBA) 8(a) Business Development Program since 2006, our companies consist of both current and graduation SBA 8(a) entities. It is our collective purpose to support the Tribe and diversify the NVE's ability to facilitate economic advancement. The income generated from our companies helps the Native Village of Eyak fund health and social services, economic development, natural resource/environmental education, jobs, job training, and other benefits to the NVE in a manner that is consistent with Alaskan Native cultural values and traditions. Copper River's Culture The Copper River Family of Companies has a positive, supportive, and thriving culture. At the foundation of our culture is a focus on collaboration. No matter your role or which operating company you work for, we are ONE TEAM working toward the same goals for our customers and for our collective owner- The Native Village of Eyak. How we treat each other is just as important as the work we deliver. Benefits Comprehensive medical, dental, and vision coverage Flexible Spending Account - healthcare and dependent care Health Savings Account - high deductible medical plan Retirement 401(k) with employer match Open leave policy and paid holidays Additional benefits including tuition reimbursement, transportation expense account, employee assistance program, and more! Note: These benefits are only applicable to full time, regular associates at Copper River. Disclaimer: The Copper River Family of Companies provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Category: Mx Mechanic Performs preventive maintenance, repair, modifications and other maintenance of aircraft, components and related equipment in accordance with standards and regulations. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Performs preventive maintenance, repair, modifications and other maintenance of aircraft, components and related equipment and complies with 14 CFR, manufactures specifications, the GMM, Company policy and procedures as well as other methods accepted by the FAA and OSHA when accomplishing maintenance. * Performs maintenance mechanic duties in all areas inside and outside the hangar as well as at the airport terminal. * Troubleshoots all aircraft systems. Executes maintenance work orders. * Uses tools, equipment and test apparatus necessary to assure completion of the work in accordance with accepted industry practices. Verifies that all calibrated tooling is current on its calibration before use. Verifies materials and parts used are of a serviceable condition. * Verifies that each part or component is effective for the aircraft on which it will be installed. * Adheres to material handling and control procedures specified in GMM and by the equipment manufacturers. Initiates material requests. * Evaluates the area and equipment that will be utilized to ensure that safety is not compromised before performing any maintenance action. Applies safety first at all times. * Maintains a clean, safe working environment throughout the work shift. * Updates Supervisor on progress of work performed. Reviews paperwork at the end of shift to ensure that all work accomplished is signed for prior to departing the maintenance facility. Assists with completion of shift turnover reports in accordance with procedures in the GMM. * Completes all department internal company forms, maintenance records, documents, work orders, etc. including performing maintenance computer system transactions as required (MEL, DMI). * Provides coaching and on-the-job training as directed. * Adheres to established work schedule. Participates in shift meetings and briefings as required. * Submits in writing any suggested changes in operational procedures that will enhance safety and cost effective aircraft maintenance. * Accesses Company Intranet to become familiar with and utilize the GMM and aircraft manuals. Ensures part effectivity is correct per aircraft. * Adheres to recurrent training, including required FAA AMT training, and keeps necessary licenses and certification up-to-date. * Reads and acknowledges understanding of maintenance newsletters and Company Emails on a timely basis. * Performs other duties as assigned or required. REQUIRED KNOWLEDGE, SKILLS AND ABILITIES The requirements listed below are representative of the knowledge, skill, and/or ability necessary to perform this job. EDUCATION and/or EXPERIENCE. * High school diploma or equivalent with an FAA Airframe and Powerplant license. PREFERRED EDUCATION and/or EXPERIENCE Previous experience as an A&P mechanic or airline experience. Experience using a computer to look up information and input data. OTHER REQUIREMENTS * Possess a stable employment history. * Must have and maintain a valid Driver's License and a clean driving record. * Must possess the required tools. * Able to work both in a team setting and individually. REGULATORY * Able to pass an FAA required 10 year work history review and pass criminal background and fingerprint checks. * Willing to submit to and pass FAA and Company mandated random drug and alcohol tests. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively and be understood before groups of associates of the organization. REASONING/PROBLEM SOLVING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several variables in standardized situations. DECISION MAKING Possess decision making skills. Makes limited decisions and determines best methods to solve problems by referring to established precedents and policies. Impact of decisions is moderately low. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * Able to stand, walk, use hands to finger, handle and feel, reach with hands and arms at least 90% of the time. * Able to climb or balance, stoop, kneel, crouch and crawl up to 60% of the time. * Able to lift up to 50 pounds at least 35% of the time. * Able to lift or move 75 pounds over 70% of the time. * Must be able to see to perform work and to see approaching vehicles, aircraft and machinery. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Work near moving mechanical parts, work with fumes or airborne particles over 90% of the time. * Work in high, precarious places up to 50% of the time. * Work around toxic or caustic chemicals up to 30% of the time. * Withstand risk of electric shock and work with explosives up to 10% of the time. * Work in outdoor weather conditions inside and outside an open air hangar as well as the airport terminal up to 100% of the time. * The work environment can be very loud. * Able to wear a respirator and protective equipment for testing and regular duties. This includes minimal facial hair in order to ensure proper fit in of respirator in accordance with OSHA regulations. * Able to work nights, evenings, weekends and holidays to support 24 hour operations. TRAVEL REQUIREMENTS Able to travel up to 20% of the time, including overnight stays. Equal Opportunity Employer, Disability and Veteran Accommodations All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job DescriptionSSI is seeking an Advanced Aircraft Technologies SME (SETA) for a role in Washington, DC. As an Advanced Aircraft Technologies Subject Matter Expert, you will provide the U.S. Air Force with Systems Engineering and Technical Assistance (SETA) and Advisory and Assistance Services (A&AS) on-site to achieve technically sufficient, cost-effective, long-term, critical capabilities to support the war-fighting mission. This position is located on Joint Base Anacostia Bolling (JBAB) in SE Washington, DC, but will also collocate in-person with team members at the Pentagon in Arlington, VA, and Joint Base Andrews (JBA) in Maryland. Role and Responsibilities:· Provide dedicated support to a Program Element Monitor within the Secretary of the Air Force, Special Programs (SAF/AQL), advanced aircraft and survivability portfolio. · Independently contribute, collaborate, and at times present for the organization on high-visibility, mission-critical aspects of multiple programs.· Execute analysis of technologies for associated or one-of-a-kind systems to include system acquisition and life cycle management for planning, programming, budgeting, program execution, and security policy. · Use your in-depth Subject Matter Expert understanding to evaluate issues and provide recommendations up to the Director/GO/SES level regarding advanced aircraft design and mission, survivability, warfighter capability and requirements, DoD system acquisition, and policies of warfighting and security protecting advanced warfighter capabilities.· Collaborate with diverse organizations and agencies to innovate and achieve cooperative agreements to leverage and drive solutions to challenging cross-cutting problems.· Provide acquisition oversight and support portfolio management activities, including working groups and integrated product teams.· Interface utilizing secure methods and procedures with other DoD Services, Congress, industry, and other external offices and agencies.· Engage in cross-functional knowledge management and technical writing best practices, building team expertise.Required Qualifications: 20+ years of relevant DoD work experience, including experience on aircraft development or operations, survivability-related programs, research, and acquisition. Bachelor's degree in a science, mathematics, engineering, or related technical field. Master of Science (MS) / Master of Engineering (ME) Degree DESIRED. Acquisition Professional Development Program (APDP) - certified in Program Management, Engineering, IT, and/or Test & Evaluation; Advanced or formerly Level 3 DESIRED. No less than five years' total experience and one within the last five years in a Special Access Program and/or SCI environment (REQUIRED). DoD 5000.02 acquisition experience on one or more ACAT I and/or ACAT II acquisition programs for research, development, test, evaluation, production, modernization, or lifecycle acquisition and sustainment activities of a DoD program; international acquisition and/or foreign disclosure experience is a plus. Intrinsically motivated team player with a desire to learn, including the personal maintenance of technical relevancy. MAJCOM level or higher Staff Experience. Strong communications to include verbal and technical writing skills. TS/SCI with previous SAP experience required. SSI has a target salary range: $180,000 - $230,000. The estimate displayed represents the typical salary range for this position based on experience and other factors. #ssi #weknowhowtobuildit #spacejobs Space Systems Integration provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Type: Full-Time & Part Time License/Certification: Airframe and powerplant certificate (Required) Qualified candidates eligible for the bonus will hold a valid A&P certificate, strong troubleshooting skills, and have a minimum of 2 years of experience providing maintenance on corporate or commercial aircraft. Benefits: 401(k) Dental insurance Flexible schedule Health insurance HSA Paid time off Vision insurance Flexible Schedule, Paid Holidays, Vacation & Sick Time, Medical, Dental, and Vision Benefits after 30 days, 401K with a company match, Short- & Long-Term Disability, Group & Voluntary Life Insurance, and EOM training opportunities. Schedule: 3x12 4x10 Day shift Night shift Supplemental pay types: Bonus pay Signing bonus *** Signing bonuses available for qualified technicians with a minimum of three years of experience and corporate Aircraft AOG support. Legibility for the signing bonus is contingent upon meeting specific qualifications and experience levels. Terms and conditions apply *** Experience: Aircraft maintenance: 2 years (Required)

Line of Business: Aggregates About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Perform inspections, troubleshooting, and repairs on plant equipment and machinery Execute preventative maintenance to ensure operational reliability and safety Collaborate with operations teams to minimize downtime and optimize performance Operate hand and power tools, welding equipment, and mobile machinery as needed Adhere to safety protocols and contribute to continuous improvement initiatives What Are We Looking For Demonstrated ability to diagnose and resolve mechanical issues efficiently Familiarity with welding, fabrication, hydraulics, and heavy equipment Capable of following procedures and maintaining accurate maintenance records Adaptable to changing priorities and effective in a team-oriented environment Strong awareness of safety practices and risk mitigation Conditions of Employment Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check Must be legally authorized to work in the United States without sponsorship Work Environment Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. What We Offer $ 25 - $32 per hour 401(k) retirement savings plan with an automatic company contribution as well as matching contributions Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits Health Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA) AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance Paid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled