Aircraft mechanic jobs in Virginia Beach, VA

**The C-12/King Air Army Transport Aircraft Mechanic (FAA A&P)** Performs organizational and intermediate level maintenance on **C-12/King Air ************** aircraft. + A valid **(FAA) A&P** certificate is Required. + **US Army C-12** and/or **King Air B************** mechanic hands-on maintenance experience is required. Level of Mechanic hire (AM-1, AM-2, AM-3) is determined by the years of hands-on A&P experience on the C-12/King Air aircraft. + **US Citizenship is Required** to obtain a US Gov Secret Security Clearance, and for facility and base access. + Is responsible for servicing, troubleshooting, repairing and modifying aircraft systems to ensure continued airworthiness. + These tasks are performed on avionics & electrical systems, engines, flight controls and airframe components. + Repairs are performed using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. + Comply with aircraft records procedures outlined in DA PAM 738-751. + Ensure aircraft discrepancies are properly recorded in accordance with approved maintenance procedures and within the terms of the contract. + Know and understand the functions and requirements of computerized maintenance software. + Perform aircraft recovery missions as necessary. + Perform engine run or taxi operations. Meet requirement to obtain certification within 12 months of employment. + Reads and interprets manufacturers' maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. + Shift work may be required; must be willing and able to work any shift and hours assigned. + Perform other qualified duties as assigned. **Minimum Requirements:** + High School degree or GED equivalent is Required. + A valid **(FAA) A&P** Certificate is Required; the (A&P) license must show compliance with FAR 65.83, recent experience requirements. + A minimum of Two **(** 2) years' experience as an (FAA) **A&P Mechanic** is Required; with Two (2) years of hands-on **C-12/King Air** Mechanic experience preferred, for an entry level AM-1 Mechanic. + **AM-2** - Mechanic requires Two **(** 2) years' experience as an (FAA) **A&P Mechanic with** a minimum of Five (5) years of hands-on **C-12/King** **Air** Mechanic experience. + **AM-3** Mechanics require a Minimum of Ten (10) years of (FAA) A&P experience, with Thirteen (13) years of hands-on **C-12/King Air** mechanic experience. + A valid Driver's License is required. + **Mechanic Tools are Required** ; Mechanics must provide their own Tools and Toolbox. Toolbox must be shadowed, each tool to be etched with mechanic PID. (Recruiter will provide tool requirements). + Must be able to obtain a Valid **US Passport** , in the event OCONUS, overseas travel is requested, to support mission requirements, TDY assignment with aircraft. + Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. + Must be willing and able to work and/or rotate for a multiple shift operation. (Work shift is subject to change; currently one shift M-F 40 hours a week). **(AR95-20) A&P Mechanic Pre-employment Medical Requirements:** + **Medical/Physical.** All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years. + BMI Body Mass Index below Forty (40) is required. **Security Clearance Requirements:** + Ability to obtain and maintain a US Gov Secret Security Clearance is Required; **US Citizenship is Required** to obtain a US Govt Secret Clearance, and to obtain facility and base access to the job site. **Physical and Additional Qualifications:** + Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. + Stand, squat, sit, walk, work with arms overhead for extended periods of time. + Pull, push, lift up to 50 lbs. + Comply with written Customer and company maintenance and logistics procedures and policies. + Comply with the FAA regulations as applicable. + Possesses a valid FAA Aircraft & Powerplant (A&P) license and shows compliance with FAR 65.83, recent experience requirements. + Must be able to speak, read, write and understand English. + Reliable, self-motivated, and able to deal with stressful situations and timelines while maintaining professional and non-confrontational attitude. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

Who We Are Textron Systems is part of Textron, a $14 billion, multi-industry company employing 35,000 talented makers, thinkers, creators and doers worldwide. We make things that fly, hover, zoom and launch. Things that move people. Protect soldiers. Power industries. We serve customers in industries spanning aerospace and defense, specialized vehicles, turf care and fuel systems. This role is in Textron System's Airborne Tactical Advantage Company (ATAC) business area. Visit TextronSystems.com & Lycoming.com to read more about who we are and the products we make! About ATAC Textron Systems - ATAC provides tactical flight training and adversary aggressor services for U.S. Navy, Marine and Air Force pilots. ATAC operates simultaneously across eight sites and two continents and comprises the world's largest outsourced civilian, tactical airborne training organization and proudly provides the highest quality live training to Squadrons, Air Wings, and Battle Groups. ATAC was the first civilian organization authorized to train the USAF's F-22 Raptors. *************** About This Role The Aircraft Mechanic is responsible for maintenance actions on Airborne Tactical Advantage Company's aircraft as well as the safe and expeditious launch and recovery flight line operations at permanent and detachment sites. Responsibilities · Maintenance efforts in support of company commitments · Proficient in one type/model aircraft and helper on additional type/model aircraft · Utilize AMS program · Training of maintenance personnel · Manage assigned maintenance programs · Assist with coordination of detachment requirements with Crew Chiefs (as necessary) · Obtain and maintain Detachment Lead qualification · The Aircraft Mechanic troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls · This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls · This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections · This mechanic\: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections · Applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals · Must be able to prioritize workload to maintain schedules on assigned projects · Additional responsibilities as delineated by Production Supervisor and Crew Chiefs · Manage programs as assigned Primary Objectives: · Safety of the workforce · Ensure quality maintenance is performed during each maintenance action · Development and training of Apprentice Aviation Mechanics · Foster maintenance team environment · Ongoing personal development · Lead by example Qualifications · Minimum requirements of this position include, but are not limited to, an A&P certification or at least 5 years of military aircraft maintenance equivalency. · Must be capable of performing unsupervised complex maintenance actions and holds or has held a QAR qualification, engine turn qualification or advanced trouble shooting experience. Must be capable of managing assigned additional collateral programs, training junior mechanics on aircraft systems / GOP's / safety practices, competent in the use of specialized tooling and/or test equipment and supervises aircraft servicing. · Performance will be continuously monitored by supervision and reviewed annually with the employee. · Must be able to lift 50 lbs · Must be able to climb in and out of the Aircraft Must be able to stand for long periods of time. How We Care At Textron Systems, our talented people make us successful. We promote an inclusive environment where we value individuality, differences, and unique perspectives. Our Company is committed to offering employees opportunities to grow and develop. Our benefits and compensation packages are designed to help our talented employees excel and achieve their goals, so they can make a difference every day in and outside of the workplace. Below are just a few examples! - Flexible Work Schedules - Education Assistance - Career Development & Training Opportunities - Wellness Program (including Fitness Reimbursement) - Medical, Dental, Vision & 401(K) with Company Funding - Paid Parental Leave Are you a Military Veteran? Textron's products and services are trusted everyday by those who protect our country. We are dedicated to hiring these Veterans and aim to translate their skills to make an impact on our Company.

D2 Government Solutions (D2GS) is seeking an experienced Aircraft Mechanic III to join our F-22 Wash and Corrosion Control team at Joint Base Langley-Eustis. The selected candidate will perform complex maintenance, inspection, and corrosion control tasks on F-22 Raptor aircraft, ensuring full compliance with Air Force Technical Orders and D2GS quality standards. Responsibilities: Perform scheduled and unscheduled wash and corrosion control services on F-22 aircraft. Conduct inspections and perform advanced maintenance on structural, hydraulic, pneumatic, and landing gear systems. Lubricate and service aircraft landing gear, replace Zerk fittings, and perform canopy waxing per Technical Orders. Operate tow tractors and direct aircraft towing operations in compliance with safety and TO requirements. Document all work in AFTO 781 forms and maintenance systems; immediately report discrepancies to the Production Superintendent. Provide technical oversight and guidance to Aircraft Mechanic Helpers. Adhere to strict Foreign Object Damage (FOD) and Dropped Object Prevention (DOP) procedures. Maintain compliance with OSHA, AFOSH, environmental regulations, and JBLE safety standards. Qualifications: High school diploma or equivalent required; technical school or A&P certification preferred. Minimum of 5 years of aircraft maintenance experience, preferably on fighter-class aircraft. Strong understanding of corrosion control, lubrication systems, and aircraft ground handling procedures. Must be able to pass a federal background check Ability to read, interpret, and apply Technical Orders Ability to work outdoors in various weather conditions and lift up to 50 lbs. About D2 Government Solutions D2GS is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Visit us on the web at ************* to learn more.

Adams Communication & Engineering Technology (ACET), Incorporated is a Veteran Owned Small Business (VOSB) system engineering and information technology firm, headquartered in Maryland and Virginia. Incorporated in 1999, we support mission critical Information Technology (IT) business needs for clients within the intelligence community (IC), Department of Defense (DOD), Veteran Administration (VA) and for select commercial clients. ACET, Inc.'s technical, programmatic, and analytical professionals are experts in commercial technology, customized solutions, and proprietary government systems. ACET is seeking an Aircraft Mechanic III in our Norfolk, VA location. Advanced Level Aircraft Mechanical and Structural Technician typically working at advanced or senior sheet metal and mechanical technician level, documenting removed components part and serial numbers in logbooks, reading technical data, engineering drawings / blueprints along with witnessing and documenting torque data. This technician performs larger scale modifications on the aircraft such as cutting or modifying larger scale existing structure to include location and installation of antennas, locating structural webs and stringers, cutting large holes in aircraft skins and frames, working directly with engineering teams on proto-types, validations and verification installs, squadron maintenance control and back shops and government field support teams (FST). Will work with and guide Level II technicians on aircraft open up / close ups to involve removal of cabin soundproofing, floor boards, air ducts, flight control rods, hydraulics and fuel systems when required. Typical tools used are drills, grinders, micrometers, calipers, sheet metal breaks and sheers, hole saws, dial indicators and acting as quality control oversite. Requirements: Must have eight (8) years' structural experience on H60 aircraft or similar rotary wing aircraft. Able to perform DEPOT level structural aircraft maintenance functions, provide technical assistance, guidance and instruction as required. Skilled/qualified in Naval Aircraft Maintenance, equivalent skill designation from other services. Able to utilize blueprints, schematics, technical drawings and manufacturers' drawings and sketches in the performance of assigned duties. Must be able to demonstrate basic sheet metal functions to include but not limited to drilling, close tolerance hole reaming, riveting, installing hi-locks, huck-bolt and cherry max fasteners, making and installing panels, skin patches and installing chin bubbles. Able to read and write, interpret and comply with aircraft maintenance procedures, manuals, specifications, directives, guides and forms used on the job. Perform troubleshooting, repair, modifications, corrosion control and preservation of aircraft and aircraft systems and aircraft sub-systems. Must be able to demonstrate an operational knowledge of aircraft, aircraft systems, and component parts. Must be able to detect, prevent and treat corrosion. Knowledge of the proper use of hand tools in aircraft maintenance. Able to complete maintenance documentation accurately as required by job assignment. Must provide own basic hand tools Must be able to pass drug test and fit for work physical as required Must be able to lift and maneuver 50 lbs. Travel may be required Able to obtain and maintain a Security Clearance and Common Access Card (CAC). **All candidates must be a U.S. Citizen to apply** The above job description is not intended to be an all-inclusive list of duties and standards of the position. ACET is an Equal Opportunity / Affirmative Action Employer and VEVRAA Federal Contractor. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to gender, race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

**Who We Are** Textron Systems is part of Textron, a $14 billion, multi\-industry company employing 35,000 talented makers, thinkers, creators and doers worldwide\. We make things that fly, hover, zoom and launch\. Things that move people\. Protect soldiers\. Power industries\. We serve customers in industries spanning aerospace and defense, specialized vehicles, turf care and fuel systems\. This role is in Textron System's Airborne Tactical Advantage Company \(ATAC\) business area\. Visit TextronSystems\.com & Lycoming\.com to read more about who we are and the products we make\! **About ATAC** Textron Systems \- ATAC provides tactical flight training and adversary aggressor services for U\.S\. Navy, Marine and Air Force pilots\. ATAC operates simultaneously across eight sites and two continents and comprises the world's largest outsourced civilian, tactical airborne training organization and proudly provides the highest quality live training to Squadrons, Air Wings, and Battle Groups\. ATAC was the first civilian organization authorized to train the USAF's F\-22 Raptors\. www\.atacusa\.com **About This Role** The Aircraft Mechanic is responsible for maintenance actions on Airborne Tactical Advantage Company's aircraft as well as the safe and expeditious launch and recovery flight line operations at permanent and detachment sites\. **Responsibilities** Maintenance efforts in support of company commitments Proficient in one type/model aircraft and helper on additional type/model aircraft Utilize AMS program Training of maintenance personnel Manage assigned maintenance programs Assist with coordination of detachment requirements with Crew Chiefs \(as necessary\) Obtain and maintain Detachment Lead qualification The Aircraft Mechanic troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls This mechanic performs 100\-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections This mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru\-flight, and post\-flight maintenance inspections Applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals Must be able to prioritize workload to maintain schedules on assigned projects Additional responsibilities as delineated by Production Supervisor and Crew ChiefsManage programs as assigned **Primary Objectives:** Safety of the workforce Ensure quality maintenance is performed during each maintenance action Development and training of Apprentice Aviation MechanicsFoster maintenance team environment Ongoing personal development Lead by example **Qualifications** Qualifications **Qualifications:** Minimum requirements of this position include, but are not limited to:A&P certification or at least 5 years of military aircraft maintenance equivalency\.Must be capable of performing unsupervised complex maintenance actions and holds or has held a QAR qualification, engine turn qualification or advanced trouble shooting experience\. Must be capable of managing assigned additional collateral programs, training junior mechanics on aircraft systems / GOP's / safety practices, competent in the use of specialized tooling and/or test equipment and supervises aircraft servicing\.Performance will be continuously monitored by supervision and reviewed annually with the employee\.Must be able to lift 50 lbs Must be able to climb in and out of the AircraftMust be able to stand for long periods of time\. **How We Care** At Textron Systems, our talented people make us successful\. We promote an inclusive environment where we value individuality, differences, and unique perspectives\. Our Company is committed to offering employees opportunities to grow and develop\. Our benefits and compensation packages are designed to help our talented employees excel and achieve their goals, so they can make a difference every day in and outside of the workplace\. Below are just a few examples\! Flexible Work SchedulesEducation AssistanceCareer Development & Training OpportunitiesWellness Program \(including Fitness Reimbursement\) Medical, Dental, Vision & 401\(K\) with Company FundingPaid Parental Leave **Are you a Military Veteran?** Textron's products and services are trusted everyday by those who protect our country\. We are dedicated to hiring these Veterans and aim to translate their skills to make an impact on our Company\. **EEO Statement** Textron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of race, color, religion, age, national origin, military status, veteran status, disability, sex \(including pregnancy and sexual orientation\), genetic information or any other characteristic protected by law\. Applicants selected will be subject to a government security investigation and must meet eligibility requirements, including US Citizenship, for access to classified information\. Preference given to Veterans of the U\. S\. Armed Forces\. **Recruiting Company:** Airborne Tactical Advantage Company (ATAC) **Primary Location:** US-Virginia-Newport News **Job Function:** Flight Operations **Schedule:** Full-time **Job Level:** Individual Contributor **Job Type:** Experienced **Shift:** First Shift **Travel:** Yes, 25 % of the Time **Job Posting:** 11/04/2025, 10:37:11 AM **Job Number:** 337425

Job Title: Aircraft Mechanic III (Avionics) Task Description: Aircraft Mechanic III (23023): Leads a team in the performance of aircraft maintenance, inspections, and scheduled / unscheduled maintenance. Processes the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. Capable of performing, supervising and inspecting the duties of Mechanic Is, IIs and IIIs. A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Avionics Systems and related Sub-Systems Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. Aircraft Mechanic III shall have experience writing with clarity and technical accuracy, and exhibit leadership and ensure adherence to all applicable policies and procedures. Possess a high degree of expertise in the control and coordination of aircraft maintenance. Thorough working knowledge of applicable maintenance/technical manuals and publications. Thorough working knowledge of aircraft maintenance records. Working understanding of the aircraft and aircraft systems. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Performs duties as Team Lead Familiar with duties assigned to personnel within all work centers. Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. Assists in coordinating aircraft moves and static display requirements. Performs duties as Liaison with base personnel for other requirements to include but not limited to fueling / defueling operations, fire department and etc. Performs all other required duties as applicable and assigned by supervision. Performs aircraft organizational level maintenance functions on F/A-18 E-F aircraft. Scheduled and unscheduled maintenance support for assigned F/A-18 E-F aircraft Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, corrosion control, preservation/de-preservation Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in in the activities plan and daily flight schedule Aircraft maintenance action documentation via logs, records, forms, and electronic means Troubleshoot malfunctions in aircraft structure, landing gear, pneumatic, hydraulic, ventilation and heating systems. Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO). Inspect, repair, replace, and rebuild aircraft components/subcomponents to include rigging of flight control. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Confined space operations to include fuel cell entry Support Equipment (SE) operation and inspections Support services General aircraft maintenance Use chemical sealants. Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Requisition repair parts, materials, and consumable supplies through military supply system. Perform other tasks as directed. Preferred Qualifications: Five or more years' F/A-18 experience Attended F/A-18 initial formal training Eight or more years' experience with NALCOMIS/OOMA Eight or more years' organizational and/or depot maintenance experience. Eight or more years' of 4790 (NAMP) program knowledge. Naval Aviation Maintenance Control Management for Optimized Organization Maintenance Activity course (C-555-0053) or if previously completed, both the Naval Aviation Maintenance Control Management course (Course D/E-555-0040) and the Naval Aviation Officer and Senior Supervisor NALCOMIS OOMA Familiarization course (Course D/E-555-0054). Familiarity and ability to use NAVAIR IETMS. Advanced Corrosion Control Course/Paint and Final Finish Previously certified F/A-18 CDQAR Basic Qualifications: Aircraft maintenance qualification with five or more years aviation maintenance experience Must be able to work 1st, 2nd, or 3rd shift or as required. Basic Corrosion Control Course. Must be able work flexible work-week schedules as required. Must be able to pass a background check. Satisfactory completion of a National Agency Check Local Records Check and Credit (NACLC) or Access National Agency Check with written Inquiries (ANACI) resulting in eligibility for a SECRET clearance shall be required of all employees Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must be able to deploy to support off station exercises and perform other support duties as assigned. Must be eligible for Common Access Card (CAC). Compensation $40.00/hour Other Compensation Employees receive a Health and Welfare benefit of $8.00 per hour paid up to 80 hours on a bi-weekly basis. Benefits Employees are offered medical, dental, vision, basic life, and short term disability insurance. Employees are able to enroll in KAI's 401k plan. Employees receive 136 hours of PTO after one year of service. KAI employees at VFC-12 have 11 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Job Title: Aircraft Mechanic III (Egress) Task Description: Aircraft Mechanic III (23023): Leads a team in the performance of aircraft maintenance, inspections, and scheduled / unscheduled maintenance. Processes the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. Capable of performing, supervising and inspecting the duties of Mechanic Is, IIs and IIIs. A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Egress Systems, Ordnance Systems and related Sub-Systems * Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. * Aircraft Mechanic III shall have experience writing with clarity and technical accuracy, and exhibit leadership and ensure adherence to all applicable policies and procedures. * Possess a high degree of expertise in the control and coordination of aircraft maintenance. * Thorough working knowledge of applicable maintenance/technical manuals and publications. * Thorough working knowledge of aircraft maintenance records. * Working understanding of the aircraft and aircraft systems. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: * Performs duties as Team Lead * Performs duties as Egress Technician * Performs duties as Ordnance CDI / QASO * Familiar with duties assigned to personnel within all work centers. * Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. * Assists in coordinating aircraft moves and static display requirements. * Performs duties as Liaison with base personnel for other requirements to include but not limited to fueling / defueling operations, fire department and etc. * Performs all other required duties as applicable and assigned by supervision. * Performs aircraft organizational level maintenance functions on F/A-18 E-F aircraft. * Scheduled and unscheduled maintenance support for assigned F/A-18 E-F aircraft * Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, corrosion control, preservation/de-preservation * Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in in the activities plan and daily flight schedule * Aircraft maintenance action documentation via logs, records, forms, and electronic means * Troubleshoot malfunctions in aircraft egress systems and subsystems. * Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment. * Inspect, repair, replace, and rebuild aircraft components/sub components to include rigging of flight control. * Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. * Confined space operations to include fuel cell entry * Support Equipment (SE) operation and inspections * General aircraft maintenance * Requisition repair parts, materials, and consumable supplies through military supply system. * Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment * Perform shift work and/or overtime as required * Perform other tasks as directed. Preferred Qualifications: * Five or more years' F/A-18 experience * Attended F/A-18 initial formal training * Eight or more years' experience with NALCOMIS/OOMA * Eight or more years' organizational and/or depot maintenance experience. * Eight or more years' of 4790 (NAMP) program knowledge. * Naval Aviation Maintenance Control Management for Optimized Organization Maintenance Activity course (C-555-0053) or if previously completed, both the Naval Aviation Maintenance Control Management course (Course D/E-555-0040) and the Naval Aviation Officer and Senior Supervisor NALCOMIS OOMA Familiarization course (Course D/E-555-0054). * Familiarity and ability to use NAVAIR IETMS. * Previously certified F/A-18 CDQAR Basic Qualifications: * Aircraft egress ordnance qualification with five or more years aviation maintenance experience * Must be able to obtain CDQAR within 90 days * Must be able to work 1st, 2nd, or 3rd shift or as required. * Basic Corrosion Control Course. * Must be able work flexible work-week schedules as required. * Must be able to pass a background check. * Satisfactory completion of a National Agency Check Local Records Check and Credit (NACLC) or Access National Agency Check with written Inquiries (ANACI) resulting in eligibility for a SECRET clearance shall be required of all employees * Must be able to climb ladders, raised platforms, and aircraft. * Must be able to use hand and power tools. * Must have dexterity to handle small parts. * Must be able to deploy to support off station exercises and perform other support duties as assigned. * Must be eligible for Common Access Card (CAC). Compensation $40.00/hour Other Compensation Employees receive a Health and Welfare benefit of $8.00 per hour paid up to 80 hours on a bi-weekly basis. Benefits Employees are offered medical, dental, vision, basic life, and short term disability insurance. Employees are able to enroll in KAI's 401k plan. Employees receive 136 hours of PTO after one year of service. KAI employees at VFC-12 have 11 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Job DescriptionDescription: Innovative Consulting & Management Services (ICMS) is a Professional & Technical Management Consulting firm with over 20 years of consulting experience. We offer technical professional services to Federal and State Governments, and Commercial clients. ICMS is a Small Business and Certified HUBZone employer. We deliver value to our clients by combining deep industry knowledge with strong functional capabilities. Our focus is to manage cost-effective programs while at the same time mitigating risk and improving results. Our success is about teamwork, a coordinated effort from all disciplines, from clients to consultants and most important, it's about delivering on our commitments. ICMS is seeking an Aircraft Mechanic I (Avionics) to provide aircraft maintenance services to the U.S. Department of Homeland Security (DHS, U.S. Coast Guard (USCG), Aviation Logistics Center (ALC) for the Medium Range Surveillance (MRS) Product Line. To ensure that aircraft remain in top condition, ALC currently completes program depot maintenance (PDM) (described as a total overhaul of an airframe) every four (4) years on each of the USCG's aircraft. During the overhaul process, any required repairs, modifications, and/or upgrades are also completed during this process. ALC may also complete overhauls and repairs for various other Government aircraft and components. In support of the USCG's PDM program, the USCG requires Aircraft Maintenance Services (AMS) for aircraft, components, Ground Support Equipment (GSE) and various other parts and components in support of USCG aviation. For this position, the specific aircraft that will be maintained will include the USCG HC-144 A/B and HC-27J. Essential Duties and Responsibilities: The primary responsibilities of the position will include but not limited to: Documents maintenance as per Quality Assurance (QA) and established regulatory requirements Maintains high state of cleanliness and utilizes a clean-as-you-go process when executing maintenance duties Performs regular Foreign Object Damage (FOD) walk-downs Maintains situational awareness and mitigate risks Complies with processes and procedures as per DHS/Department of Defense (DoD) documents and publications Maintains and controls tools. Reports missing, lost, found, or unattended tools to the site supervisor immediately upon discovery Inventory and inspect tools IAW ALC INST 13600.1 on a regular basis and identify when to replace worn or broken tools Cleans work area as necessary, assuring all flammable or otherwise hazardous materials are properly stored; handles and disposes of hazardous materials in accordance with applicable laws and regulatory requirements Complies with safety rules and procedures and performs work in a manner that enhances the safety of the work area. Promptly reports accidents, injuries, safety violations, and/or unsafe practices or procedures to the site supervisor Uses Government computer system to access various technical references for airframe repairs and Government training requirements Provides satisfactory customer service Services, repairs, and overhauls aircraft to ensure airworthiness Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic, engines, auxiliary power unit, propellers and propeller gearboxes, ventilation, and heating systems Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills Reads and interprets manufacturer's and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Performs progressive, isochronal, phase, periodic, and other hourly or calendar inspections Examines engines for any abnormalities IAW the OEM's maintenance manual such as engine/hydraulic leaks, general wear and tear, chaffing lubrication line, electrical harnesses and other components associated with the engine Examines the propeller system for delaminated, damaged, chipped, or worn propeller blades. Also inspect the propeller gearbox for any abnormalities IAW the OEM's maintenance manual such as lubrication leaks, general wear and tear, chaffing lubrication line, electrical harnesses and other components associated with the propeller system Inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks Replaces or repairs worn or damaged components, alternators, fuel controls, fuel pumps, oil pumps, engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment Removes engine from aircraft, using hoist or forklift truck Disassembles and inspects parts for wear, cracks, and airworthiness Repairs or replaces defective engine parts and reassembles and installs engine in aircraft Adjusts, repairs, or replaces electrical wiring system and aircraft accessories Performs preflight, thru-flight, and post-flight maintenance inspections Performs miscellaneous duties to service aircraft, including flushing gearboxes, cleaning screens and filters, greasing moving parts, and checking brakes Supervises the jacking and towing of aircraft Enters in the maintenance record description of the work performed and verifies the work was performed satisfactorily May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in line maintenance engine repair Provides technical direction to Aircraft Mechanic Helpers and Aircraft Workers Ability to perform a full range of aircraft electrical/avionic maintenance, repairs, modifications, inspections in accordance with approved methods, techniques, practices, and certifies accomplished work Ability to adjust, repair, or replace electrical wiring systems Experience in the installation and removal of electrical/avionic components Experience in troubleshooting and repair of aircraft interface issues with electrical/avionic components, antennas, radar systems, navigations systems, and flight director systems. Requirements: Shall be citizens of the U.S. High school diploma or equivalent Four (4) years of documented experience performing aircraft maintenance on fixed or rotary wing aircraft or demonstrated experience performing aircraft maintenance as an Aircraft Helper on this contract Four (4) years of documented experience in aircraft electrical/avionic installation, troubleshooting and repair Ability to operate all GSE equipment associated with fixed wing airframes (scissor lift, etc.) Gas Free Engineer qualified Forklift qualified Ability to read, write, speak, and understand English fluently Possess computer skills to include a basic knowledge sufficient to complete internet searches and prepare/edit documents utilizing word processing or spreadsheet applications Shall be capable of using cumbersome Personal Protective Equipment (PPE) for Hazardous Material (HAZMAT) operations. Physical Requirements: Shall be capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. Shall be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. Shall be capable of carrying items up to 40 pounds and on heavier items shall seek assistance of other workers or weightlifting devices. Full-time Day Shift: Monday-Friday, 6:45 am to 3:15 pm Pay Rate: $41.77/hr. Benefits: Health & Welfare Benefits as covered by the Collective Bargaining Agreement Medical, Dental, Vision Insurance Life and Accidental AD&D Insurance 401K Retirement plan Generous sick and vacation leave based on seniority ICMS is an Equal Opportunity Employer: Qualified applicants are considered for employment without regard to race, color, religion, age, sex, national origin, disability or veteran status, genetics, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionSalary: $38.44 Hr. Aircraft Mechanic I (General) Qualifications Four (4) years of documented experience performing aircraft maintenance on DHS/DoD aircraft platforms, or the following will be considered: A&P License with four (4) years of documented experience performing aircraft maintenance on fixed or rotary wing aircraft. High school diploma or equivalent (unless higher education is required for a particular job category). Ability to read, write, speak, and understand English fluently. Shall be a citizen of the U.S. Possess computer skills to include basic knowledge sufficient to complete internet searches and prepare/edit documents utilizing word processing or spreadsheet applications. Shall be capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time (applies to all industrial areas and aircraft touch labor categories). Shall be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures (applies to all industrial areas and aircraft touch labor categories). Shall be capable of carrying items up to 40 pounds and on heavier items shall seek assistance of other workers or weightlifting devices (applies to all industrial areas and aircraft touch labor categories). Shall be capable of using cumbersome Personal Protective Equipment (PPE) for Hazardous Material (HAZMAT) operations (applies to all industrial areas and aircraft touch labor categories). Aircraft Mechanic I (General) Tasks The Aircraft Mechanic I (General, Electrical, Avionics, and Sheet Metal) duties shall include, but are not limited to: Service, repair, and overhaul aircraft and aircraft engines to ensure airworthiness. Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces, and controls, anti-icing, pneumatics, hydraulics, engines, auxiliary power unit, and ventilation and heating systems. Repair, replace, and rebuild aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. Read and interpret manufacturers and airlines maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Perform progressive, isochronal, phase, periodic, and other hourly or calendar inspections. Examine the propeller system for delaminated, damaged, chipped, or worn propeller blades. Also inspect the propeller gearbox for any abnormalities IAW the Original Equipment Manufacturers (OEM) maintenance manual such as lubrication leaks, general wear and tear, chaffing lubrication line, electrical harnesses, and other components associated with the engine. Inspect jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspect jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks. Test engine operation, using testing equipment to locate source of malfunction. Replace or repair worn or damaged components, fuel controls, fuel pumps, oil pumps, engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment. Remove engine from aircraft, using hoist or forklift truck. Disassemble and inspect parts for wear, cracks, and airworthiness. Repair or replace defective engine parts and reassembles and installs engine in aircraft. Adjust, repair, or replace electrical wiring system and aircraft accessories. Perform preflight, thru-flight, and post-flight maintenance inspections. Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervise the jacking and towing of aircraft. Enter in the maintenance record description of the work performed and verify the work was performed satisfactorily. May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition. May specialize in work, repair, and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. Provide technical direction to Aircraft Mechanic Helpers and Aircraft Workers. Document maintenance as per Quality Assurance (QA) and established regulatory requirements. Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. Perform regular Foreign Object Damage (FOD) walk-downs. Maintain situational awareness and mitigate risks. Comply with processes and procedures as per DHS/Department of Defense (DoD) documents and publications. Maintain and control tools. Report missing, lost, found, or unattended tools to the on-site supervisor immediately upon discovery. Inventory and inspect tools on a regular basis and identify when to replace worn or broken tools. Clean work area as necessary, assuring all flammable or otherwise hazardous materials are properly stored; handle and dispose of hazardous materials in accordance with applicable laws and regulatory requirements. Comply with safety rules and procedures and perform work in a manner that enhances the safety of procedures to the on-site supervisor. Use Government computer system to access various technical references for airframe repairs and Government training requirements. Provide satisfactory customer service. LOGMET is an Affirmative Action and Equal Opportunity Employer:we welcome and encourage all individuals, including veterans and individuals with disabilities, to apply!If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact LOGMETs Human Resources Department Manager directly:*************,**************, Ext.4.

Job DescriptionPosition: Aircraft Mechanic I - Electrical Type: Full Time Shift: 2nd Shift INTER-OP is currently seeking an Aircraft Mechanic I (Electrical) to provide support to the United States Coast Guard (USCG), Aviation Logistics Center (ALC). The Coast Guard Aviation Logistics Center provides centralized logistics support for all Coast Guard aviation missions. As the sole industrial complex for Coast Guard aviation, ALC provides depot level maintenance, engineering, supply, procurement, acquisition, and information services. Responsibilities Service, repair, and overhaul aircraft and aircraft engines to ensure airworthiness. Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, hydraulic, engines, auxiliary power unit, and ventilation and heating systems. Repair, replace, and rebuild aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. Read and interpret manufacturers and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Perform 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections. Examine engines for cracked cylinders and oil leaks and listen to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves. Inspect jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspect jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks. Test engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Replace or repair worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment. Remove engine from aircraft, using hoist or forklift truck. Disassemble and inspect parts for wear, cracks, and airworthiness. Repair or replace defective engine parts and reassembles and installs engine in aircraft. Adjust, repair, or replace electrical wiring system and aircraft accessories. Perform preflight, thru-flight, and post-flight maintenance inspections. Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervise the jacking and towing of aircraft. Enter in the maintenance record description of the work performed and verify the work was performed satisfactorily. May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition. May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. Provide technical direction to Aircraft Mechanic Helpers and Aircraft Workers Qualifications / Experience U.S Citizen Ability to read, write, speak and understand English fluently. Four (4) years of documented experience performing aircraft maintenance on DHS/DoD aircraft platforms. MRR - H60 experience (other rotary wing may be accepted on a case by case basis) Ability to perform a full range of aircraft electrical/avionic maintenance, repairs, modifications, inspections in accordance with approved methods, techniques, practices, and certifies accomplished work. Ability to adjust, repair, or replace electrical wiring systems. Experience in the installation and removal electrical/avionic components. About INTER-OP INTER-OP provides a diverse range of support services to both government and corporate clients. We are a veteran owned company that is dedicated to providing an extremely high level of service to our clients as well as an outstanding work experience for our employees. Powered by JazzHR xqskp7XrhH

Job Code **3705** \# of Openings **1** Apply Now (**************************************************** Requisition?org=GATEWAYVENT&cws=55&rid=3705) OLH Technical Services, LLC, a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking a Supervisory Aircraft Mechanic III. **Position Responsibilities:** + Service, repair, and overhaul aircraft to ensure airworthiness. + Maintain, repair, and modify aircraft structures and structural components of moderate difficulty. + Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. + Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and apply required expertise in restoring equipment condition and or operation. + Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufacturer's manuals. + Prioritize workload to maintain schedules on assigned projects. + Provide technical direction to Aircraft Mechanic I Contractor employees. + Provide the duties of an On-Site Supervisor. **Position Requirements:** + Eight (8) years of documented experience performing aircraft maintenance on fixed or rotary wing aircraft. + Possess Aviation Technical School certification or an Associate's Degree in Aviation Maintenance Technology or similar (FAA A&P). + Shall have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. + Broad knowledge of aircraft sheet metal/structural modifications and repair. + Shall have basic knowledge of electrical theory. + Thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. + Working knowledge of technical publications. + Ability to operate GSE equipment associated with fixed wing airframes (tow tractor, scissor lift, cranes, mast boom lift, etc.). + Gas Free Engineer qualified. + Forklift qualified. VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Working at Breeze Airways is an exciting endeavor and a serious commitment to bring “The World's Nicest Airline” to life. We work cross-functionally with truly awesome Team Members to deliver on our mission: “To make the world of travel simple, affordable, and convenient. Improving our guests travel experience using technology, ingenuity and kindness.” Breeze is hiring- join us! Breeze Airways is the newest, nicest, fastest growing airline with maintenance bases in Windsor Locks, CT (BDL), Charleston, SC (CHS), New Orleans, LA (MSY), Norfolk, VA (ORF), Provo, UT (PVU), Tampa, FL(TPA), Providence, RI (PVD), Orlando, FL (MCO), Fort Myers, FL (RSW) and Raleigh-Durham, NC (RDU)! Breeze is looking for great and experienced talent. Your entry pay will be based on your experience and our established criteria. Year Hourly Pay 1 $30.50 2 $31.00 3 $31.50 4 $34.50 5 $36.00 6 $37.00 *$2.00 shift differential added when working from 9:00PM - 7:30AM The Aircraft Maintenance Technician (AMT) is responsible for performing maintenance, preventative maintenance, and alterations of Breeze aircraft, including troubleshooting, performing run-up and taxi procedures, and signing mechanical flight releases. The Aircraft Maintenance Technician reports to a Line Maintenance Supervisor and carries out instructions as assigned in accordance with FAA regulations and Breeze policy and procedures. As certified AMTs, you have an important role to ensure the safety of our fellow Breeze Team members and Guests as well as the airworthiness of our fleet. Here's what you'll do Perform all assigned maintenance duties in accordance with the Breeze General Maintenance Manual (GMM) Responsible and accountable for all work performed Complete all appropriate Breeze forms on all work assigned and performed Properly handle all parts, units, assemblies, and aircraft while in the repair process Ensure that all documentation is kept current as to open discrepancies and completed corrective actions Complete all associated and required documentation for all maintenance work performed or inspections conducted accurately and correctly Submit personal OJT Task Cards on time and accurately Maintain the work area in a safe, clean, and operative condition and ensure all tools are accounted for at completion of all assigned tasks Properly care for and use tooling and equipment used for aircraft maintenance Notify the Maintenance Supervisor and all other appropriate Team Members of any condition that would compromise the airworthiness of Breeze aircraft Maintain a valid Airframe & Powerplant (A&P) Certificate, or Repairman Certificate, and keep the certificate available for inspection by the FAA, NTSB, or Breeze Supervisor/Manager Perform other duties and tasks as assigned by Maintenance Leadership, MOC, and/or DOM Achieve performance measures and adhere to established standards in conjunction with Breeze Aviation Group Values of Safety, Kindness, Integrity, Ingenuity and Excellence Here's what you need to be successful Minimum Qualifications Must hold a current, valid FAA Airframe and Powerplant License (A&P) with no history of infractions and recent experience on commercial aircraft types Ability to read and interpret aircraft maintenance manuals and specifications Must have a valid driver's license Must be at least 18 years of age High school diploma or equivalent educational achievement Must have a valid passport with no travel restrictions Must have authorization to work in the US as defined by the Immigration Reform Act of 1986 Must have the ability to travel unrestricted to and from the United States Must be flexible and willing to work all shifts to support a 24/7 operation. Must be willing to travel 20% of the time Must be willing to work with other departments within the company as needed Must pass a DOT pre-employment drug test Must pass a TSA required fingerprint-based criminal history records check and a Breeze background check Preferred Qualifications Understanding and working knowledge of FAA regulations including FAR part 121 operations Experience maintaining Embraer E-Jet and/or Airbus A220 family aircraft Familiar with an airline Maintenance Information System (MIS) such as TRAX Degree in Aerospace, Aviation Maintenance or Business Degree preferred Skills/Talents Skills in Microsoft Office Suite (Word, Excel, Outlook) Must be fluent in English Exemplifies Breeze's safety culture, values, and mission Excellent oral and written communication skills Excellent problem-solving skills Ability to work with individuals and teams at all levels in the organization Perks of the Job Health, Vision and Dental Health Savings Account with Breeze Employee Match 401K with Breeze Employee Match PTO Travel on Breeze and other Airlines too! Breeze Airways provides equal employment opportunities to all Team Members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Breeze Airways will never request your Social Security Number, Driver's License or Date of Birth on our job postings. Job Postings requesting any or all of this information should be regarded as a scam. To ensure you are applying to an actual Breeze Airways posting, please apply online at ***************** then click “Careers” at the bottom of the page.

Psionic, LLC is a startup focused on lidar sensors for autonomous vehicles. We value our customer relationships, our diverse and dynamic work environment, and our employees' career satisfaction. We offer a competitive salary and attractive benefits package. Our website describes our corporate values and how they apply to the professional success and growth of our employees. We are seeking a Mechanical Engineer with experience developing unique, production ready instrumentation. We value a diverse, hands-on background with electro-optics systems and instrumentation to complement our on-site team in Hampton, Virginia. Job Description The primary purpose of this position is to help us with mechanical design and development efforts for next generation lidar to support defense and space contracts. The successful candidate will work within a multidisciplinary team to design and analyze structures and mechanical and electromechanical subsystems that meet the specifications and standards of aerospace and defense customers. The applicant will evaluate mechanical and electromechanical systems and products through experience and analysis; conducting research and development programs and applying principles of mechanics, thermodynamics, hydraulics, heat transfer, and materials. Our designs must perform under stringent environmental conditions. The successful candidate will confirm system and product capabilities by designing feasibility and testing methods and properties. The work includes the ability to work closely with experts in many disciplines with a systems mind-set. Projects will include lab demonstrations, field measurement campaigns, prototypes Major Responsibilities Develop mechanical and electromechanical products by studying customer requirements; researching and testing manufacturing and assembly methods and materials; and soliciting observations from operators. Develop manufacturing processes by designing and modifying equipment for fabricating, building, assembling, and installing components. Assure system and product quality by designing testing methods; validating finished products and system capabilities; and verifying fabrication, assembly, and installation processes. Prepare product reports by collecting, analyzing, and summarizing information and trends. Clearly communicate engineering information by written and oral reports. Maintain product and company reputation by complying with government regulations. Serves as mechanical and structural lead for assembly and manufacturing including training and guiding technicians. Contributes to team effort with both expertise in mechanical engineering and the ability to contribute to system success through interface problem identification and effective communication with other experts. and building hardware for space flight and defense systems. Required Education & Requirements Must be legally able to work in the United States; US Citizenship is preferred Ability to pass a pre-employment background check BS degree or higher in Mechanical Engineering is required A minimum of 8 years of hands-on experience is required Strong oral and written communication skills Firm grasp of engineering concepts, and experience designing and analyzing mechanical and optomechanical systems and products An ability to learn new skills and adapt to new technologies Experienced teamwork in the formulation, design, development, modification, implementation, calibration, and field deployment of advanced electronic measurement and instrumentation systems or other ground systems, or subsystems for laboratory, aero, or space flight systems. Experience with full life cycle development. Ability to troubleshoot and diagnose issues that arise during testing Structural and Thermal analysis experience is a plus 3-D CAD/SolidWorks experience Psionic, Inc. is an affirmative action employer and is committed to creating and maintaining a workplace in which all employees have an opportunity to participate and contribute to the success of the business and are valued for their skills, experience, and unique perspectives. Psionic, Inc. provides equal employment opportunities to all employees and applicants for employment, and expressly prohibits any form of unlawful harassment or discrimination based on race, color, religion, ancestry, national origin, gender, gender identification, sexual orientation, age, marital status, disability, genetic information or results of genetic testing, or service in the military. This position requires access to export-controlled technology or software source code and is subject to U.S. Export Control Laws. This position requires eligibility to work in the United States and well as the ability to pass a pre-employment background check.

Lead Mechanic Supervisor- Gas Free Purpose: Colonna's Shipyard is seeking a Lead Mechanic Supervisor -Gas Free to support day shift operations in our Shipyard in Norfolk, VA. Position will support management with training and assignment of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge in support and execution of production goals in ship repair/industrial fabrication operations. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require occasional travel. Job Description: * Primary duty is to execute routine (and non-routine) production duties in support of operational goals and in compliance with Company procedures and policies. * Performs skilled tasking (relative to their assigned trade) in the maintenance, repair, installation/removal, new construction, etc. activities supporting ship repair/industrial fabrication operations. * Supports management to facilitate daily production activities of the team and helps ensure employees (assigned to their work crew) have all necessary tools, equipment, work procedures, etc. to work safely and efficiently. * May assist management with timekeeping validation, training, performance management, coaching/counselling, supervision, etc. for employees assigned to their work crews. * Breaks broader production requirements down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites. * Knowledge and ability to follow the CHT process control procedures and NAVSEA item 009-09/88. * Analyze job from start to finish ensuring proper and safe methods used. * Read and interpret work specification, blueprint, technical manuals, and schematics. * Plug, blanks and locate leaks or other problems. * Locate and flushes pipeline to meet Gas Free conditions. * Perform repairs on pumps and related equipment. * Utilizing their production knowledge, make recommendations to support Plan of the Day (POD) for their assigned projects and utilizing their assigned resources to efficiently achieve operational requirements of projects. * Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions. * Responsible for understanding and complying with all technical aspects of the job including adherence to all contract requirements, drawings, procedures/work instructions, etc. Additionally, position will: * Review project specifications/SOWs and support creation of requisitions of all needed materials in accordance with contract requirements and associated references. * Generate and submits production reports to management (to include condition and surveillance reports, operational briefs, executed quality checks, etc.) meeting all technical/customer reporting requirements. * Support management in ensuring tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment. * Initiates QA/Customer call out and attends/executes TIP inspections. * May serve as backup/makeup to supervisor, as needed. * Provides input to management and project teams to support schedule, progress, ETC/EAC updates for all projects assigned to them. Qualifications: * Must have a Bachelors or Registered Apprentice (grad) or HS and at least 7 years related trade experience (in the trade to be supervised). * Must have the ability to understand job specifications, drawings, and corresponding technical references. * Must be able to work effectively with others. * Must be steady, flexible, reliable worker. Desired Qualifications: * Prefer some previous supervisory/mentoring experience (such as make-up supervisor). Security Requirements: * Must be able to access government facilities and be DBIDS eligible. * Position requires you to obtain and maintain a DBIDS. * Position requires US Citizenship. Travel Requirements: * ·Minimal Travel; 10% or less. Physical Requirements: * Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs. * Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes. * May ride ships at sea for extended periods. * Able to perform other duties as required which may involve high heat, humidity, noise, and dirty conditions, working aloft or over the sides of vessels. * Frequent exposure to noise due to machinery and equipment. * Employee is required to operate trucks, forklifts & man-lifts. * While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl. * Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation * Frequent use of respirator. * Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal. Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

The C-12/King Air Army Transport Aircraft Mechanic (FAA A&P) Performs organizational and intermediate level maintenance on C-12/King Air ************ aircraft. * A valid (FAA) A&P certificate is Required. * US Army C-12 and/or King Air B************ mechanic hands-on maintenance experience is required. Level of Mechanic hire (AM-1, AM-2, AM-3) is determined by the years of hands-on A&P experience on the C-12/King Air aircraft. * US Citizenship is Required to obtain a US Gov Secret Security Clearance, and for facility and base access. * Is responsible for servicing, troubleshooting, repairing and modifying aircraft systems to ensure continued airworthiness. * These tasks are performed on avionics & electrical systems, engines, flight controls and airframe components. * Repairs are performed using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. * Comply with aircraft records procedures outlined in DA PAM 738-751. * Ensure aircraft discrepancies are properly recorded in accordance with approved maintenance procedures and within the terms of the contract. * Know and understand the functions and requirements of computerized maintenance software. * Perform aircraft recovery missions as necessary. * Perform engine run or taxi operations. Meet requirement to obtain certification within 12 months of employment. * Reads and interprets manufacturers' maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. * Shift work may be required; must be willing and able to work any shift and hours assigned. * Perform other qualified duties as assigned. Minimum Requirements: * High School degree or GED equivalent is Required. * A valid (FAA) A&P Certificate is Required; the (A&P) license must show compliance with FAR 65.83, recent experience requirements. * A minimum of Two (2) years' experience as an (FAA) A&P Mechanic is Required; with Two (2) years of hands-on C-12/King Air Mechanic experience preferred, for an entry level AM-1 Mechanic. * AM-2 - Mechanic requires Two (2) years' experience as an (FAA) A&P Mechanic with a minimum of Five (5) years of hands-on C-12/King Air Mechanic experience. * AM-3 Mechanics require a Minimum of Ten (10) years of (FAA) A&P experience, with Thirteen (13) years of hands-on C-12/King Air mechanic experience. * A valid Driver's License is required. * Mechanic Tools are Required; Mechanics must provide their own Tools and Toolbox. Toolbox must be shadowed, each tool to be etched with mechanic PID. (Recruiter will provide tool requirements). * Must be able to obtain a Valid US Passport, in the event OCONUS, overseas travel is requested, to support mission requirements, TDY assignment with aircraft. * Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. * Must be willing and able to work and/or rotate for a multiple shift operation. (Work shift is subject to change; currently one shift M-F 40 hours a week). (AR95-20) A&P Mechanic Pre-employment Medical Requirements: * Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years. * BMI Body Mass Index below Forty (40) is required. Security Clearance Requirements: * Ability to obtain and maintain a US Gov Secret Security Clearance is Required; US Citizenship is Required to obtain a US Govt Secret Clearance, and to obtain facility and base access to the job site. Physical and Additional Qualifications: * Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. * Stand, squat, sit, walk, work with arms overhead for extended periods of time. * Pull, push, lift up to 50 lbs. * Comply with written Customer and company maintenance and logistics procedures and policies. * Comply with the FAA regulations as applicable. * Possesses a valid FAA Aircraft & Powerplant (A&P) license and shows compliance with FAR 65.83, recent experience requirements. * Must be able to speak, read, write and understand English. * Reliable, self-motivated, and able to deal with stressful situations and timelines while maintaining professional and non-confrontational attitude. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

D2 Government Solutions (D2GS) is seeking motivated Aircraft Mechanic Helpers to assist in the execution of F-22 Wash and Corrosion Control services at Joint Base Langley-Eustis. This entry-level role provides essential support to senior mechanics and is a great opportunity to gain hands-on experience in a highly specialized aircraft maintenance environment. Responsibilities: Assist Aircraft Mechanic III personnel during F-22 wash, lubrication, and corrosion control operations. Prepare aircraft for servicing by installing protective covers, taping seams, and masking sensitive areas. Perform routine cleaning and washing tasks using TO-approved cleaning compounds. Provide ground support during towing operations, including serving as wing/tail walkers. Handle tools, materials, and equipment in support of senior mechanics. Maintain clean and organized work areas while following FOD/DOP requirements. Document assistance tasks and ensure compliance with safety and quality control requirements. Qualifications: High school diploma or equivalent. Minimum of 1 year of general mechanical, maintenance, or related work preferred. Ability to follow detailed instructions and work as part of a team. Must be able to pass a federal background check Willingness to work outdoors in varying conditions and lift up to 50 lbs. Desire to grow within the aircraft maintenance career field. About D2 Government Solutions D2GS is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Visit us on the web at ************* to learn more.

Qualifications Qualifications: include, but are not limited to: A&P certification or at least 5 years of military aircraft maintenance equivalency. Must be capable of performing unsupervised complex maintenance actions and holds or has held a QAR qualification, engine turn qualification or advanced trouble shooting experience. Must be capable of managing assigned additional collateral programs, training junior mechanics on aircraft systems / GOP's / safety practices, competent in the use of specialized tooling and/or test equipment and supervises aircraft servicing. Performance will be continuously monitored by supervision and reviewed annually with the employee. Must be able to lift 50 lbs Must be able to climb in and out of the Aircraft Must be able to stand for long periods of time. How We Care At Textron Systems, our talented people make us successful. We promote an inclusive environment where we value individuality, differences, and unique perspectives. Our Company is committed to offering employees opportunities to grow and develop. Our benefits and compensation packages are designed to help our talented employees excel and achieve their goals, so they can make a difference every day in and outside of the workplace. Below are just a few examples! Flexible Work Schedules Education Assistance Career Development & Training Opportunities Wellness Program (including Fitness Reimbursement) Medical, Dental, Vision & 401(K) with Company Funding Paid Parental Leave Are you a Military Veteran? Textron's products and services are trusted everyday by those who protect our country. We are dedicated to hiring these Veterans and aim to translate their skills to make an impact on our Company. Who We Are Textron Systems is part of Textron, a $14 billion, multi-industry company employing 35,000 talented makers, thinkers, creators and doers worldwide. We make things that fly, hover, zoom and launch. Things that move people. Protect soldiers. Power industries. We serve customers in industries spanning aerospace and defense, specialized vehicles, turf care and fuel systems. This role is in Textron System's Airborne Tactical Advantage Company (ATAC) business area. Visit TextronSystems.com & Lycoming.com to read more about who we are and the products we make! About ATAC Textron Systems - ATAC provides tactical flight training and adversary aggressor services for U.S. Navy, Marine and Air Force pilots. ATAC operates simultaneously across eight sites and two continents and comprises the world's largest outsourced civilian, tactical airborne training organization and proudly provides the highest quality live training to Squadrons, Air Wings, and Battle Groups. ATAC was the first civilian organization authorized to train the USAF's F-22 Raptors. *************** About This Role The Aircraft Mechanic is responsible for maintenance actions on Airborne Tactical Advantage Company's aircraft as well as the safe and expeditious launch and recovery flight line operations at permanent and detachment sites. Responsibilities Maintenance efforts in support of company commitments Proficient in one type/model aircraft and helper on additional type/model aircraft Utilize AMS program Training of maintenance personnel Manage assigned maintenance programs Assist with coordination of detachment requirements with Crew Chiefs (as necessary) Obtain and maintain Detachment Lead qualification The Aircraft Mechanic troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections This mechanic\: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections Applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals Must be able to prioritize workload to maintain schedules on assigned projects Additional responsibilities as delineated by Production Supervisor and Crew Chiefs Manage programs as assigned Primary Objectives: Safety of the workforce Ensure quality maintenance is performed during each maintenance action Development and training of Apprentice Aviation Mechanics Foster maintenance team environment Ongoing personal development Lead by example

Job Title: Aircraft Mechanic III (Avionics) Task Description: Aircraft Mechanic III (23023): Leads a team in the performance of aircraft maintenance, inspections, and scheduled / unscheduled maintenance. Processes the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. Capable of performing, supervising and inspecting the duties of Mechanic Is, IIs and IIIs. A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Avionics Systems and related Sub-Systems * Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. * Aircraft Mechanic III shall have experience writing with clarity and technical accuracy, and exhibit leadership and ensure adherence to all applicable policies and procedures. * Possess a high degree of expertise in the control and coordination of aircraft maintenance. * Thorough working knowledge of applicable maintenance/technical manuals and publications. * Thorough working knowledge of aircraft maintenance records. * Working understanding of the aircraft and aircraft systems. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: * Performs duties as Team Lead * Familiar with duties assigned to personnel within all work centers. * Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. * Assists in coordinating aircraft moves and static display requirements. * Performs duties as Liaison with base personnel for other requirements to include but not limited to fueling / defueling operations, fire department and etc. * Performs all other required duties as applicable and assigned by supervision. * Performs aircraft organizational level maintenance functions on F/A-18 E-F aircraft. * Scheduled and unscheduled maintenance support for assigned F/A-18 E-F aircraft * Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, corrosion control, preservation/de-preservation * Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in in the activities plan and daily flight schedule * Aircraft maintenance action documentation via logs, records, forms, and electronic means * Troubleshoot malfunctions in aircraft structure, landing gear, pneumatic, hydraulic, ventilation and heating systems. * Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO). * Inspect, repair, replace, and rebuild aircraft components/subcomponents to include rigging of flight control. * Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. * Confined space operations to include fuel cell entry * Support Equipment (SE) operation and inspections * Support services * General aircraft maintenance * Use chemical sealants. * Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment * Perform shift work and/or overtime as required * Requisition repair parts, materials, and consumable supplies through military supply system. * Perform other tasks as directed. Preferred Qualifications: * Five or more years' F/A-18 experience * Attended F/A-18 initial formal training * Eight or more years' experience with NALCOMIS/OOMA * Eight or more years' organizational and/or depot maintenance experience. * Eight or more years' of 4790 (NAMP) program knowledge. * Naval Aviation Maintenance Control Management for Optimized Organization Maintenance Activity course (C-555-0053) or if previously completed, both the Naval Aviation Maintenance Control Management course (Course D/E-555-0040) and the Naval Aviation Officer and Senior Supervisor NALCOMIS OOMA Familiarization course (Course D/E-555-0054). * Familiarity and ability to use NAVAIR IETMS. * Advanced Corrosion Control Course/Paint and Final Finish * Previously certified F/A-18 CDQAR Basic Qualifications: * Aircraft maintenance qualification with five or more years aviation maintenance experience * Must be able to work 1st, 2nd, or 3rd shift or as required. * Basic Corrosion Control Course. * Must be able work flexible work-week schedules as required. * Must be able to pass a background check. * Satisfactory completion of a National Agency Check Local Records Check and Credit (NACLC) or Access National Agency Check with written Inquiries (ANACI) resulting in eligibility for a SECRET clearance shall be required of all employees * Must be able to climb ladders, raised platforms, and aircraft. * Must be able to use hand and power tools. * Must have dexterity to handle small parts. * Must be able to deploy to support off station exercises and perform other support duties as assigned. * Must be eligible for Common Access Card (CAC). Compensation $40.00/hour Other Compensation Employees receive a Health and Welfare benefit of $8.00 per hour paid up to 80 hours on a bi-weekly basis. Benefits Employees are offered medical, dental, vision, basic life, and short term disability insurance. Employees are able to enroll in KAI's 401k plan. Employees receive 136 hours of PTO after one year of service. KAI employees at VFC-12 have 11 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Full-time Description Innovative Consulting & Management Services (ICMS) is a Professional & Technical Management Consulting firm with over 20 years of consulting experience. We offer technical professional services to Federal and State Governments, and Commercial clients. ICMS is a Small Business and Certified HUBZone employer. We deliver value to our clients by combining deep industry knowledge with strong functional capabilities. Our focus is to manage cost-effective programs while at the same time mitigating risk and improving results. Our success is about teamwork, a coordinated effort from all disciplines, from clients to consultants and most important, it's about delivering on our commitments. ICMS is seeking an Aircraft Mechanic I - Sheet Metal (Night Shift) to provide aircraft maintenance services to the U.S. Department of Homeland Security (DHS, U.S. Coast Guard (USCG), Aviation Logistics Center (ALC) for the Medium Range Surveillance (MRS) Product Line. To ensure that aircraft remain in top condition, ALC currently completes program depot maintenance (PDM) (described as a total overhaul of an airframe) every four (4) years on each of the USCG's aircraft. During the overhaul process, any required repairs, modifications, and/or upgrades are also completed during this process. ALC may also complete overhauls and repairs for various other Government aircraft and components. In support of the USCG's PDM program, the USCG requires Aircraft Maintenance Services (AMS) for aircraft, components, Ground Support Equipment (GSE) and various other parts and components in support of USCG aviation. For this position, the specific aircraft that will be maintained will include the USCG HC-144 A/B and HC-27J. Essential Duties and Responsibilities: The primary responsibilities of the position will include but not limited to: Documents maintenance as per Quality Assurance (QA) and established regulatory requirements Maintains high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties Performs regular Foreign Object Damage (FOD) walk-downs Maintains situational awareness and mitigate risks Complies with processes and procedures as per DHS/Department of Defense (DoD) documents and publications Maintains and controls tools. Reports missing, lost, found, or unattended tools to the site supervisor immediately upon discovery Inventory and inspect tools IAW ALC INST 13600.1 on a regular basis and identify when to replace worn or broken tools. Cleans work area as necessary, assuring all flammable or otherwise hazardous materials are properly stored; handles and disposes of hazardous materials in accordance with applicable laws and regulatory requirements Complies with safety rules and procedures and performs work in a manner that enhances the safety of the work area. Promptly reports accidents, injuries, safety violations, and/or unsafe practices or procedures to the site supervisor Uses Government computer system to access various technical references for airframe repairs and Government training requirements Provides satisfactory customer service Services, repairs, and overhauls aircraft to ensure airworthiness Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic, engines, auxiliary power unit, propellers and propeller gearboxes, ventilation, and heating systems. Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills Reads and interprets manufacturer's and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Performs progressive, isochronal, phase, periodic, and other hourly or calendar inspections Examines engines for any abnormalities IAW the OEM's maintenance manual such as engine/hydraulic leaks, general wear and tear, chaffing lubrication line, electrical harnesses and other components associated with the engine Examines the propeller system for delaminated, damaged, chipped, or worn propeller blades. Also inspect the propeller gearbox for any abnormalities IAW the OEM's maintenance manual such as lubrication leaks, general wear and tear, chaffing lubrication line, electrical harnesses and other components associated with the propeller system. Inspect jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks Replaces or repairs worn or damaged components, alternators, fuel controls, fuel pumps, oil pumps, engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment Removes engine from aircraft, using hoist or forklift truck Disassembles and inspects parts for wear, cracks, and airworthiness Repairs or replaces defective engine parts and reassembles and installs engine in aircraft Adjusts, repairs, or replaces electrical wiring system and aircraft accessories Performs preflight, thru-flight, and post-flight maintenance inspections Performs miscellaneous duties to service aircraft, including flushing gearboxes, cleaning screens and filters, greasing moving parts, and checking brakes Supervises the jacking and towing of aircraft Enters in the maintenance record description of the work performed and verify the work was performed satisfactorily May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in line maintenance engine repair Provides technical direction to Aircraft Mechanic Helpers and Aircraft Workers Ability to perform sheet metal, plastic, and composite depot level repairs on fixed or rotary wing aircraft Ability to perform major airframe repairs or modifications Ability to use applicable airframe repair procedures and/or DHS/DOD engineering approved procedures in performance of tasks resulting in safe, mission ready aircraft Experience in performing airframe repairs that utilize various glues, resins, fiberglass, epoxy, pro-seal and/or other chemical reactive consumables as per applicable aircraft technical references Experience in reading and interpreting drawings Ability to form, shape, and fabricate aircraft stringers, bulkheads, access panels, doublers, inspection plates, box-beams, fairings/cowlings for fuselage applications and on primary flight control surfaces. Requirements Shall be citizens of the U.S. High school diploma or equivalent Four (4) years of documented experience performing aircraft maintenance on fixed or rotary wing aircraft or demonstrated experience performing aircraft maintenance as an Aircraft Helper on this contract Four (4) years of documented experience performing aircraft sheet metal repairs on fixed or rotary wing aircraft Ability to operate all GSE equipment associated with fixed wing airframes (scissor lift, etc.) Gas Free Engineer qualified Forklift qualified Ability to read, write, speak, and understand English fluently Possess computer skills to include a basic knowledge sufficient to complete internet searches and prepare/edit documents utilizing word processing or spreadsheet applications Shall be capable of using cumbersome Personal Protective Equipment (PPE) for Hazardous Material (HAZMAT) operations. Physical Requirements: Shall be capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. Shall be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. Shall be capable of carrying items up to 40 pounds and on heavier items shall seek assistance of other workers or weightlifting devices. Full-time Night Shift: Monday-Thursday 3:30pm-12:00am Friday 2:30pm - 11:00 pm Pay Rate: $41.77/hr. - including $1.00/hr. (night shift differential) Benefits: Health & Welfare Benefits as covered by the Collective Bargaining Agreement Medical, Dental, Vision Insurance Life and Accidental AD&D Insurance 401K Retirement plan Generous sick and vacation leave based on seniority ICMS is an Equal Opportunity Employer: Qualified applicants are considered for employment without regard to race, color, religion, age, sex, national origin, disability or veteran status, genetics, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #ZR Salary Description $42.77/hour