Aircraft mechanic jobs in West Allis, WI - 384 jobs

Why choose HCSO? We have a history of stability and excellence. We continue to maintain and cultivate the highest level of standards and professionalism. We are unlike any other. Join the HCSO family! Compensation Range $33.75-$51.90 Starting Salary Range 33.75-42.825 Summary Perform highly skilled duties in the inspection, maintenance, and repair of fixed-wing and rotary-wing airframes, powerplants, and components to ensure airworthiness; inspect repairs of grounding malfunctions and certify the airworthiness of the aircraft. Must obtain the Federal Aviation Administration (FAA) Inspection Authorization certificate within one year of hire. Duties & Responsibilities Note: Depending on assigned responsibilities, employees may perform some or all of the duties below. Perform daily and periodic inspections of piston and turbine powered fixed-wing aircraft and piston and turbine powered helicopters to ensure airworthiness in accordance with established regulations, maintenance manuals, and guidelines. Perform highly skilled maintenance and repair of airframes, powerplants, engines, components, flight instrumentation, electrical, mechanical, pneumatic, and hydraulic systems, and other related equipment to correct discrepancies and malfunctions. Inspect repairs of unsafe flight discrepancies and malfunctions and certify the airworthiness of the aircraft in accordance with the manufacturer specifications and FAA regulations. Remove, replace, install, rig, calibrate, and test components to ensure proper operation in accordance with manufacturer specifications and FAA regulations. Operate and maintain a wide variety of equipment used to repair and maintain aircraft. Perform major and minor repair, overhaul, and alteration of aircraft airframe, powerplant, propeller, and equipment in accordance with the manufacturer maintenance manuals and FAA regulations and return the aircraft to service in a safe and reliable condition. Test repaired systems for proper operation. Input relative data into a computerized maintenance tracking system. Maintain maintenance logs and records as required by FAA regulations and internal policies. Review maintenance records for trends of problems and reliability of systems. Inventory, requisition, and maintain supplies and equipment required to perform aircraft maintenance and repairs. Schedule preventive maintenance checks to ensure maximum in commission status. Maintain a current listing of FAA regulations, technical manuals, and flight safety bulletins. Perform other related duties as required. Knowledge, Skills & Abilities Extensive knowledge of fixed-wing and rotary-wing aircraft maintenance, repair, and alterations. Extensive knowledge of airframe and powerplant construction and operations. Extensive knowledge of FAA and Occupational Safety and Health Administration (OSHA) regulations and other statutory and administrative guidelines related to work safety and aircraft maintenance standards and procedures. Extensive knowledge of the operation and maintenance of various test and servicing equipment used in the service and maintenance of fixed-wing and rotary-wing aircraft. Skill in using a wide variety of hand tools and test equipment to troubleshoot, maintain, and repair aircraft. Ability to troubleshoot aircraft malfunctions and perform necessary repairs. Ability to follow established procedures. Ability to follow oral and written instructions. Ability to identify trends in malfunctions and take appropriate actions to improve system reliability and safety. Ability to communicate effectively, both orally and in writing. Ability to maintain work-related records and prepare reports. Ability to use a computer and related software. Working Conditions Working on a ramp, within a hanger, or within a climate-controlled maintenance bay of a law enforcement agency facility. Working outdoors in a subtropical climate in potential adverse weather conditions and high noise levels. Traversing rough and/or uneven terrain. Positioning self to repair aircraft above, near, or at ground level. Maintaining cell phone availability after hours and at home to provide assistance/guidance to subordinates. Participating in an on-call status that requires a 24 hour a day availability to respond to callouts. Working nonstandard duty hours and rotating shifts that include nights, weekends, and holidays. Engaging in frequent heavy physical exertion of aircraft repair material and equipment (e.g., lifting, carrying, pushing and/or pulling of objects and materials of heavy weight up to 100 pounds). Minimum Education & Experience A high school diploma or possession of a GED certificate. Possession of a valid FAA Airframe and Powerplant Mechanic certificate. Four years of experience in turbine engine helicopter maintenance and repair of which two years must have been with Airbus models. Two years of experience in single and/or twin-engine fixed-wing aircraft maintenance. OR An associate degree or higher from an accredited institution of higher education. Possession of a valid FAA Airframe and Powerplant Mechanic certificate. Three years of experience in turbine engine helicopter maintenance and repair of which two years must have been with Airbus models. Two years of experience in single and/or twin engine fixed-wing aircraft maintenance. OR Two years of experience as a Hillsborough County Sheriff's Office Aircraft/Powerplant Mechanic. Additionally, the following is required: Meet requirements of Title 14 Code of Federal Regulations, Federal Aviation Regulation Part 65.91 through Part 65.95 for an Inspection Authorization. Additional Job Requirements Attendance at the specified Sheriff's Office work location is required. Depending on assignment, employees may be required to possess a valid Florida Driver License at time of employment. Driving history will be thoroughly reviewed and may be grounds for disqualification. No visible tattoos on face, head, and neck. Tattoos determined to take away from the professional appearance of the Sheriff's Office must be covered with an appropriate white, black, or neutral covering. No illegal drug sale within lifetime. No illegal drug use within the past 36 months. No marijuana use within the last 12 months. No felony convictions within lifetime. No misdemeanor convictions involving perjury, false statement, or domestic violence within lifetime. No dishonorable discharge from any branch of the United States Armed Forces, the United States Coast Guard, National Guard, or Reserve Forces. Successful completion of a background investigation including criminal, reference, employment, and neighborhood checks; polygraph; medical evaluation; and drug screening. The duties and responsibilities on this job description represent the essential functions that an employee must be able to satisfactorily perform with or without reasonable accommodations. Reasonable accommodations shall be made upon request to enable employees with disabilities to perform the essential functions of their job, absent undue agency hardship. The Sheriff's Office retains the right to change or assign other duties to this job as necessary. Preferred Qualifications Completion of a 14 CFR Part 147 Training Program or military equivalent. Completion of Airbus H125 maintenance training. Completion of Safran Arriel 2D maintenance training. Completion of Pilatus PC-12 maintenance training. Completion of Pratt and Whitney PT-6 maintenance training. The Hillsborough County Sheriff's Office is an Equal Opportunity Employer, we believe that diversity and inclusion among our applicants and employees is critical to our success as a community partner. We seek to offer employment opportunities without regard to race, color, religion, sex, pregnancy, national origin, age, physical/mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, and military/veteran status.

Job Description Our client has been synonymous with dependability and quality in the air freight industry since 1986. As the company has grown, so has the number of industries it serves. Today, the company continues to provide the most excellent customer care-driven service to the air freight industry and many others. By carrying over the core belief structure forged in the air freight business of providing the customer what they want on time and at a competitive rate, our client can provide superior air freight services to our growing list of satisfied customers. They are currently recruiting for an A&P Mechanic job in Milwaukee, WI. What Is In It For You Position Type: Permanent - Full-time Benefits: Health, Dental, Vision, Life, STD/LTD, Vacation Pay, Sick Pay, Holiday Pay, 401(k) A Day In The Life of an A&P Mechanic The position you are applying for will be under general supervision. You are responsible for the maintenance, modification, and servicing of aircraft and aircraft components following the manufacturer's specification and FARS. Essential Duties of The A&P Mechanic Perform routine scheduled maintenance and aircraft inspection by ACC's and current manufacturers' specifications. Read and interpret aircraft maintenance manuals and specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components. Modifies aircraft systems or components following drawings, engineering orders, and technical publications. Assemble and install electrical, mechanical, hydraulic, and structural components and accessories using hand and power tools. Provide emergency/unscheduled repairs to minimize aircraft downtime. Requires ability to travel. Review maintenance records and flight logs to schedule prescribed maintenance checks and overhauls. Process all necessary documentation and paperwork for processes completed. Follow all clean-up and housekeeping procedures. Comply with all quality, safety, and sanitation regulations. JOB SPECIFICATIONS Minimum Education: High School Diploma or equivalent Preferred Education: One to two years of technical college/training or equivalent Certifications/Licenses: FAA Airframe and Powerplant Minimum Experience: Up to three to five years or more experience Preferred Experience: Up to six years or more experience Skills: Interpret drawings, specifications, and schematics of aircraft parts/components. Problem-solving and independent decision-making skills Good communication skills Exercise good judgment in working with people in a team environment as well as in aircraft maintenance and safety. Machine Skills: Operate hand and power tools Calculator, PC, telephone, and fax machine Environmental Conditions: Exposure to weather. Work may be performed of doors Physical Demands: Ability to climb ladders, sit-stand, crouch bend for extended periods Physical Strength: Vision Requirements: Accommodation: The ability to adjust vision to bring objects into focus Communication: Communicate effectively with others in the work environment and external customers Representation: Represent the company in a professional and positive manner Contacts: Exchange information with employees and external customers If you are interested in the A&P Mechanic job in Milwaukee, WI, apply today! This vacancy is being advertised by Total Aviation Staffing, LLC. The services advertised by Total Aviation Staffing, LLC are those of an Employment Agency

Inspects, repairs, maintains and services Flight School aircraft in accordance with Federal Aviation Regulations. Essential Functions * Troubleshoot, repair, inspect, modify and service aircraft systems and equipment, airframes and power plants in accordance with Specifications set forth by the manufacturer and the Service Manuals, Service Bulletins, FAA Regulations * Perform scheduled inspections including 100 hour and annual inspections (if authorized) * Perform maintenance and repair associated with inspections * Perform major and minor repairs and alterations as part of line maintenance, heavy maintenance and structural repair * Maintain and repair equipment used in the department * Perform other incidental duties as may be assigned Knowledge / Skills * Verifiable, hands-on experience of the actual time spent in the repair, maintenance, overhaul or manufacture of aircraft required * Ability to work rotating shifts including weekends, holidays, and days-off * Demonstrates good judgment and confidentiality * Exceptional verbal and written communication skills with a strong emphasis on customer service * Excellent time management, follow-through and organizational skills * Strong communication and ability to build relationships with all levels of management and pilots * Strategic and forward-thinker * Ability to handle multiple priorities with a high degree of accuracy * Intermediate to advanced computer skills in Word, Excel and Outlook * Strong knowledge of flight software (Talon)

One of the largest Aircraft Maintenance, Repair and overhaul facilities is hiring A&P mechanics in Rockford, IL. The ideal candidate will have a background line or heavy maintenance checks on commercial or regional aircraft. The right candidate can expect a competitive hourly rate based on their experience and background. There is also potential for relocation for candidates who are not local to the area. Description: Technician I, A&P (Licensed). Responsible for performing intermediate/heavy maintenance tasks without supervision. What you will be responsible for: Perform flight control and engine throttle rigging. Able to use FAA approved data (i.e. IPC, M/M, OHM, SRM) proficiently. Insure work performed adheres to high quality standards. Effectively direct the work of less experienced mechanics. What you will need to be successful in this role: High school diploma or General Education Degree (GED), required. Must have minimum of 5 years' experience in heavy maintenance or related experience and/or training. FAA Airframe & Powerplant (A&P) license, required. Computer keypunch experience. Previous experience in warehousing, handling inventory, and bar code equipment. The rewards of your career at our client go far beyond just your salary: Competitive salary and bonus package Comprehensive benefits package including medical, dental, and vision coverage. 401(k) retirement plan with company match Generous paid time off program Professional development and career advancement opportunities Physical Demands/Work Environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility. The environmental characteristic for this position is an office setting. Candidates should be able to adapt to a traditional business environment. Our client provides accommodation in accordance with applicable laws through all stages of the hiring process. If you require accommodation for any part of the application and/or hiring process, please advise Human Resources. #IND2

Description Role Overview This position is responsible for inspecting, testing, adjusting, repairing, and performing other tasks related to the maintenance and repair of airframe and engine systems and components. Key Responsibilities Performs inspections, servicing, and repairs of a complex nature on various aircraft systems and components Efficiently and effectively troubleshoot and function test referencing manufacturer's technical documents across a variety of airframe, engine and component systems Leads aircraft projects as directed by the Crew Chief and Supervisor Expertly prepares and completes various documents for maintenance/ modification record keeping purposes, as required by FAA Airworthiness Regulations, Elliott Aviation Policies and Processes, FAA Approved Repair Station and Quality Control Manuals, and personal training logs (OJT) Proficiently and consistently locate and uses the appropriate technical data to accomplish any and all tasks Support, maintain, and comply with all Federal, OSHA, State and local regulations, and Elliott Aviation's Environmental, Health, and Safety Policies and Processes Perform related duties, as assigned. Qualifications Ability to attain & retain AOA badge or Airport requirements FAA Inspection Authorization (IA) preferred Must obtain & retain designation as an Elliott Aviation Production Inspector (Blue stamp) High school graduate or equivalency degree required Thorough knowledge and understanding of FARs 43, 65, 91, 135, 145 Aircraft maintenance experience preferred Licenses: Airframe & Powerplant License required Skills and Competencies: Willingness to work on a team with both experienced technicians and mentor junior technicians with a calm demeanor. Willingness to learn by taking guidance from others Ability to communicate well in straightforward situations Organizational skills and attention to detail Ability to maintain a safe and clean work environment Must possess excellent mechanical aptitude and a desire to work Salary & Benefits Wage Scale: The wage scale for this position ranges from $20.00 to $44.00 per hour, based on experience, qualifications and performance. Specific compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Benefits & PerksElliott Aviation takes pride in offering a competitive and comprehensive benefit package to its employees to ensure our team is well cared for. Benefits begin the first day of employment! Sign-on Bonus and relocation bonus potential (qualified jobs only) Health, Dental and Vision Insurance- Significant cost are contributed by Elliott Aviation as part of our commitment to providing a comprehensive benefit program. Plus, you can earn lower rates through our wellness program. RXnGo Pharmacy benefit - Generic prescription coverage at zero cost to the employee Time Off - You will receive 8 paid holidays and paid vacation. Relocation Assistance Provided for most of our positions 401(k) - Company Match Company Sponsored short-time and long-term disability as well as life insurance Employee Assistance Program (EAP) - Confidential consultation and resources services 24/7 Training and Education- On average, Elliott Aviation invests upwards of $3,000 per team member on development of technical skills as well as soft and leadership skills

Aircraft Mechanic I (23021): Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti- icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair. May be required to be licensed by Federal Aviation Administration. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Federal Aviation Administration (FAA) licensing of contractor employee technical proficiency is not required. An Aircraft Mechanic I shall be the equivalent of a Marine Corps Collateral Duty Inspector. Additional required skills for corrosion control personnel: Respirator fit qualified Aircraft Corrosion Control (N-701-0013) certification. Aircraft tow qualifications or equivalent Experience with aircraft powerline maintenance Mechanic I Functions: The Contractor Aircraft Mechanic I, in addition to the specified corrosion functions and tasks, shall be trained and qualified as Collateral Duty Inspectors (CDI) in accordance with the Naval Aviation Maintenance Program 4790 and all local and command requirements. The Contractors qualified as Mechanic I shall serve within work centers 120 (Airframes). They shall be responsible for performing maintenance in their respective qualifications as a Mechanic I CDI. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Airframes/Structures/Hydraulics and related Sub-Systems, and Aircraft Logs and Records Administration Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. Aircraft Mechanic I shall have experience writing with clarity and technical accuracy, and exhibit leadership and ensure adherence to all applicable policies and procedures. Possess a high degree of expertise in the control and coordination of aircraft maintenance. Thorough working knowledge of applicable maintenance/technical manuals and publications. Thorough working knowledge of aircraft maintenance records. Working understanding of the aircraft and aircraft systems Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Aircraft Organizational Level (O-Level) Maintenance Support, General Aircraft Maintenance, Corrosion Prevention, Detection, and Abatement/Repair as required for KC-130J aircraft Maintain assigned aircraft/aeronautical equipment in a manner that meets or exceeds the requirements of the CNAFINST 4790.2 (series) programs IAW the Performance Work Statement (PWS) Scheduled and unscheduled Organizational (O-Level) Maintenance Support Maintenance Control planning and management Aircraft maintenance action documentation via records, forms, and electronic means Support Equipment operations and inspections Aircraft inspections Aircraft Movement Corrosion Control/Aircraft Painting Troubleshooting Preservation and de-preservation General aircraft maintenance Technical Directive compliance and modifications Initiate and Complete Maintenance Action Forms via Optimized Organizational Maintenance Activity (OOMA) or hard copy. Perform duties as Collateral Duty Inspector (CDI) for Airframes, Power Plants, and Avionics Systems. Vibration Analysis Operator / Interpreter Tire and Wheel Hydraulic Contamination APU operations Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Other duties as assigned Preferred Qualifications: 7 years or more of Organizational level maintenance 5 years or more maintenance experience on KC-130J aircraft NALCOMIS OOMA Familiarization/Naval Aviation Maintenance Control Management Course (Course D/E-555-0053 OR A COMBINATION OF NALCOMIS OOMA Familiarization Course (Course D/E-555-0054) and Naval Aviation Maintenance Control Course (Course D/E-555-0040) Previously Safe For Flight certified Previously Collateral Duty Quality Assurance Representative (CDQAR) for Airframes, Power Plants, and/or Avionics Systems Qualified as Vibration Analysis Operator/Interpreter Tire and Wheel certified Hydraulic Contamination APU Operator Aircraft Tow qualifications as wing walker, Tow Supervisor, and driver Aircraft paint and final finish Basic Qualifications: Aircraft Mechanic I shall have a minimum of three years aircraft maintenance experience Previously Collateral Duty Inspector (CDI) for Airframes Systems Aircraft Corrosion Control (N-701-0013) certification Must be eligible for Common Access Card (CAC) Must be deployable to locations Outside Continental U.S. (OCONUS) Employment is contingent on a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; (d) your ability to get a required clearance by your effective start date, if needed

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.

Minimum 2 years of experience as Aircraft Maintenance Technician/Mechanic. Must have Airframe & Powerplant License. Must share copy of A&P License or A&P License number. Must be available to work on ANY shift. Performing general mechanical tasks on aircraft and related systems. Removal and installation of panels and components, Troubleshooting and problem solving aircraft system/component issues De-fueling aircraft, Engine removal/installations, Operating ground support equipment, Inspection and evaluation of the aircraft and components Aircraft movement and assistance in performance runs/ taxiing Maintenance and repair of shop facility, equipment and tooling Basic computer skills to be able to navigate electronic training, manuals, and maintenance data bases Any other job-related duties as assigned by supervisor or management.

**Hiring: Aviation Structural / Sheet Metal Mechanic** (Intermediate & Advanced Level) Milwaukee, WI Area | On‑Site | 1st Shift Permanent / Direct Hire A growing aerospace and defense manufacturer is seeking Aviation Structural / Sheet Metal Mechanics at both the Intermediate and Advanced level. This role supports high‑mix aerospace fabrication and military programs in a clean, temperature‑controlled service center (non‑airport environment). **Position Overview** This position is responsible for hands‑on sheet metal fabrication, structural assembly, and component repair for aerospace applications. The ideal candidate will have strong sheet metal fundamentals and blueprint experience. **Key Responsibilities** + Perform metal fabrication tasks including cutting, trimming, drilling, forming, fitting, marking, dent removal, and assembly + Fabricate and repair sheet metal and tubular exhaust components _(highly desired experience)_ + Assemble and repair aerospace structural components and duct work + Read and interpret blueprints, work instructions, and drawings + Support welding fabrication processes (TIG exposure preferred) + Perform basic composite and insulation processes, including: + Hand lay‑up + Curing + Trimming + Insulation wrapping + Use hand tools, power tools, and shop equipment + Measure and inspect parts using tape measures, calipers, micrometers, and scales + Maintain safety, quality, and cleanliness standards in a production service‑center setting **Required Qualifications** **Intermediate Level -** 32-38/hr + **2+ years** of sheet metal / metal fabrication experience + Experience with forming, fitting, and structural assembly + Ability to read blueprints and use precision measurement tools + Computer and ERP system experience **Advanced** **Level -** 33-45/hr + **5+ years** of aerospace or aviation sheet metal experience + Advanced blueprint interpretation and independent fabrication ability + Strong experience in complex assemblies and repairs + Computer and ERP system experience **Work Schedule & Environment** + 1st Shift: 7:00 AM - 3:30 PM + Typically 40-45 hours per week, with some Saturdays as needed + Stable workload with consistent overtime when available + Clean, climate‑controlled shop environment + Not located on an airport or flight line Travel: Initial travel to California for training required **Benefits** + Medical insurance with strong employer contribution + Free dental and vision + 401(k) with company match + Long‑term program stability due to defense contracts **Job Type & Location** This is a Permanent position based out of Milwaukee, WI. **Pay and Benefits** The pay range for this position is $65000.00 - $80000.00/yr. United Benefits, Free dental and vision. 401K match **Workplace Type** This is a fully onsite position in Milwaukee,WI. **Application Deadline** This position is anticipated to close on Feb 6, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Summary Aircraft technicians are essential to Deltahawk Engines' airframe integration efforts, contributing significantly to both development and certification processes. Their main role is to complete maintenance, modifications, flight testing, and offering crucial design feedback for test assets and new airframe projects. Essential Duties & Responsibilities An individual in this position must be able to successfully perform the duties and responsibilities listed below. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Other duties may be assigned. Perform maintenance, repair, and troubleshooting of aircraft systems, including engine, airframe, avionics, and electrical systems without formal troubleshooting documentation Ensure that work performed on aircraft is completed to the highest safety and quality standards Properly document aircraft maintenance and modifications as well as storage of these documents Required Qualifications A&P mechanic License 2+ years of hands-on experience working on aircraft or aircraft engines Understanding of applicable regulatory requirements and related documentation requirements Strong “can do” attitude accompanied with a sense of ambition and urgency Ability to follow procedures to maintain, repair, and troubleshoot aircraft systems Excellent attention to detail in mechanical assembly and the inspection process during teardowns Ability to comprehend technical details effectively in verbal and written form Computer literacy including the ability to organize and manage test data Ability to lift, hold, and position weights up to 45 lbs at least two to four times per hour as needed Ability to work in various positions necessary to service the engine or test equipment as needed Overtime and domestic travel may be required Tools will be provided Preferred Qualifications Sport Pilot license or better Composites fabrication and repair experience Working Conditions Work will be conducted in typical mechanical shop and industrial test cell environments.

**We are Generac, a leading energy technology company committed to powering a smarter world.** Over the 60 plus years of Generac's history, we've been dedicated to energy innovation. From creating the home standby generator market category, to our current evolution into an energy technology solutions company, we continue to push new boundaries. The **Mechanical Engineer II-Engines** plays an important role in advancing the design and performance of internal combustion engines (ICE), through engine development, data-driven analysis, testing, and design of system components. This position leverages data analytics, ATI Vision, and data acquisition tools to optimize system behavior, improve engine control, improve product reliability, and increase engine performance across a range of gaseous fueled applications. **Major Responsibilities:** + Develop engine systems and components for engine performance using design reviews, testing, problem solving, and calculations to support engine and generator design. + Conduct testing to evaluate the engine and systems relative to performance and emissions. + Conduct system analysis using development processes to aid in optimizing the transient, emissions, and steady-state performance of the engine/generator. + Interpret testing results and collaborate with cross-functional teams through design reviews and technical discussions to guide product development. + Contribute to the development of engine workflows and analysis best practices to improve group efficiency and accuracy. + Document project objectives, methods, and results using standardized reporting formats. + Apply data analysis techniques, including Matlab/Simulink or Python-based scripting, and machine learning to support predictive modeling and performance forecasting. + Stay informed on relevant technologies, tools, and industry trends to support continuous improvement. **Minimum Job Requirements:** **Education:** + Bachelor's degree in Mechanical Engineering or Electrical Engineering, or related discipline **Work Experience:** + 2 or more years of relevant work experience **Knowledge, Skills, and Abilities:** + Experience in new IC engine design and development. + Ability to create systems for internal combustion engines, including understanding of the effects of spark control, adjusting AFR for best performance and emissions, PID settings for best transient performance, MAP based control, calibrating w/EGR, and calibrating with a catalyst. + Develops, tests, and integrates complex components and evaluates overall effectiveness, cost (including cost/benefit analysis), reliability (risk analysis), and safety. + Designs, develops, executes, and evaluates testing, product specifications, and process validation plans for a variety of complex products and/or components. + Ability to perform detail-oriented work with a high degree of accuracy on multiple projects. + Good knowledge of internal combustion engine performance development and specification. + Strong analytical and problem-solving skills, with a deep understanding of internal combustion engine design, operation, and testing. + Written and verbal communication skills with the ability to clearly interpret and present complex simulation results to technical and non-technical audiences. + Familiarity with machine learning and predictive analytics techniques applied to engine performance and emissions modeling. + Collaborate with internal manufacturing partners, contract manufacturers, designers, and product specialists to optimize complex and advanced designs for performance. **Preferred Job Requirements:** **Education:** + Master's degree in mechanical engineering, Aerospace Engineering, Computer Science, or a related field of study **Work Experience:** + 3 years of hands-on experience in engine and engine system development + 3 years of experience applying MATLAB/Simulink and Python in internal combustion engine design + 3 years of experience using ATI Vision for calibrating internal combustion engines + 2 years of experience in an Automotive, Development, or a related engineering discipline + 2 years of hands-on experience with engine and engine component development + 2 years of experience in powertrain data collection and analysis - ATI/CAN or similar + 1 year of hands-on experience with ATI Vision as applied to engine control systems + 1 year of experience in exhaust aftertreatment simulation with GT-Suite/GT-xCHEM or CHEMKIN. **Knowledge, Skills, and Abilities:** + Comprehensive knowledge of internal combustion engines and effective engine test methods + Experience with MATLAB/Simulink, Python, C/C+, Labview, Targetlink, Vision, ETOS or similar to modify embedded control software + Extensive experience with internal combustion engine performance development and specification + Demonstrated written communication and presentation skills + Ability to apply engineering knowledge and experience to improve products, services and processes + Data analysis and control/diagnostic feature creation skills + Familiarity with systems engineering based problem solving + Proven ability to work well with others as part of a diverse global team **Physical Demands** : While performing the duties of this job, the employee is regularly required to talk and hear; and use hands to manipulate objects or controls. The employee is regularly required to stand and walk. On occasion the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 - 50 pounds. Specific conditions of this job are typical of frequent and continuous computer-based work requiring periods of sitting, close vision and ability to adjust focus. Occasional travel. _"We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any other characteristic protected by law."_ Over the 60 plus years of Generac's history, we've been dedicated to energy innovation. From creating the home standby generator market category, to our current evolution into an energy technology solutions company, we continue to push new boundaries. As one of the leaders and largest suppliers of power generation equipment and technology, the work we do touches millions of lives. Employees at Generac are encouraged to be innovative and are valued as an integral part of our global team. Our challenging goals develop knowledgeable employees dedicated to helping continue Generac's success. Generac provides individuals the opportunity to work in a fast-paced agile work environment where their work makes a difference in people's lives and their own.

*This job is also open to Ukrainian refugees with an FAA A&P or equivalent license. We will assist in the process of working in the U.S. Under general supervision the Aircraft Mechanic is responsible for the maintenance, modification and servicing of aircraft and aircraft components in accordance with manufacturer's specification and FARS. JOB ACCOUNTABILITIES The following are essential job accountabilities: Perform routine scheduled maintenance and inspection of aircraft in accordance with ACC's and current manufacturers specifications. Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damages components. Modifies aircraft systems or components following drawings, engineering orders and technical publications. Assemble and install electrical, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools. Provide emergency/unscheduled repairs to minimize aircraft downtime. Requires ability to travel. Review maintenance records and flight logs to schedule prescribed maintenance checks and overhauls. Process all necessary documentation and paperwork for processes completed including OJT. Follow all clean up and housekeeping procedures. Comply with all quality, safety and sanitation regulations. JOB SPECIFICATIONS Minimum Education: High School Diploma or equivalent Preferred Education: One to two years technical college/training or equivalent Certifications/Licenses: FAA Airframe and Powerplant or equivalent Preferred Experience: Up to six years or more experience Skills: Interpret drawings, specifications and schematics of aircraft parts/components Problem solving and independent decision making skills Good communication skills Exercise good judgment in working with people in a team environment as well as in aircraft maintenance and safety Machine Skills: Operate hand and power tools Calculator, PC, telephone, and fax machine Environmental: Exposure to weather. Work may be performed out of doors Physical Demands: Ability to climb ladders, sit stand crouch bend for extended periods Vision Requirements: Accommodation: ability to adjust vision to bring objects into focus Communication: Communicate effectively with others in the work environment and external customers Representation: Represent the company in a professional and positive manner Contacts: Exchange information with employees and external customers The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an all inclusive list of all responsibilities and skills required for the position. Nothing in this job description restricts Management's right to assign or reassign duties and responsibilities. ОРисание: ÐœÐµÑ Ð°Ð½Ð¸Ðº Рланера / силовой установки ОБЗОРРАБОТЫ Под общим контролем Ð¼ÐµÑ Ð°Ð½Ð¸Ðº A&P несет ответственность за Ñ‚ÐµÑ Ð½Ð¸Ñ‡ÐµÑÐºÐ¾Ðµ обслуРивание, модификацию и обслуРивание самолетов и комРонентов самолетов в соответствии со сРецификацией Рроизводителя и FARS. Обязанности: ДОЛЖНОСТНАЯ ОТВЕТСТВЕННОСТРНиРе Реречислены основные рабочие учетные заРиси: · ВыРолняйте Рлановое Ñ‚ÐµÑ Ð½Ð¸Ñ‡ÐµÑÐºÐ¾Ðµ обслуРивание и осмотр самолетов в соответствии со сРецификациями ACC и Ð´ÐµÐ¹ÑÑ‚Ð²ÑƒÑŽÑ‰Ð¸Ñ Ð Ñ€Ð¾Ð¸Ð·Ð²Ð¾Ð´Ð¸Ñ‚ÐµÐ»ÐµÐ¹. · Прочтите и интерРретируйте руководства и сРецификации Ро Ñ‚ÐµÑ Ð½Ð¸Ñ‡ÐµÑÐºÐ¾Ð¼Ñƒ обслуРиванию самолетов, чтобы оРределить возмоРность и метод ремонта или замены Ð½ÐµÐ¸ÑÐ Ñ€Ð°Ð²Ð½Ñ‹Ñ Ð¸Ð»Ð¸ Ð Ð¾Ð²Ñ€ÐµÐ Ð´ÐµÐ½Ð½Ñ‹Ñ ÐºÐ¾Ð¼Ð Ð¾Ð½ÐµÐ½Ñ‚Ð¾Ð². · Модифицирует системы или комРоненты самолета в соответствии с чертеРами, Ñ‚ÐµÑ Ð½Ð¸Ñ‡ÐµÑÐºÐ¸Ð¼Ð¸ заказами и Ñ‚ÐµÑ Ð½Ð¸Ñ‡ÐµÑÐºÐ¸Ð¼Ð¸ Рубликациями. · Сборка и установка ÑÐ»ÐµÐºÑ‚Ñ€Ð¸Ñ‡ÐµÑÐºÐ¸Ñ , Ð¼ÐµÑ Ð°Ð½Ð¸Ñ‡ÐµÑÐºÐ¸Ñ , Ð³Ð¸Ð´Ñ€Ð°Ð²Ð»Ð¸Ñ‡ÐµÑÐºÐ¸Ñ Ð¸ ÐºÐ¾Ð½ÑÑ‚Ñ€ÑƒÐºÑ†Ð¸Ð¾Ð½Ð½Ñ‹Ñ ÐºÐ¾Ð¼Ð Ð¾Ð½ÐµÐ½Ñ‚Ð¾Ð² и аксессуаров с исРользованием Ñ€ÑƒÑ‡Ð½Ñ‹Ñ Ð¸ электроинструментов. · ОбесРечьте аварийный/внеРлановый ремонт, чтобы свести к минимуму время Рростоя самолета. Требуется умение Рутешествовать. · Просмотрите заРиси о Ñ‚ÐµÑ Ð½Ð¸Ñ‡ÐµÑÐºÐ¾Ð¼ обслуРивании и Рурналы Ролетов, чтобы заРланировать РредРисанные Рроверки Ñ‚ÐµÑ Ð½Ð¸Ñ‡ÐµÑÐºÐ¾Ð³Ð¾ обслуРивания и каРитальный ремонт. · Обработайте всю Ð½ÐµÐ¾Ð±Ñ Ð¾Ð´Ð¸Ð¼ÑƒÑŽ документацию и документы для Ð·Ð°Ð²ÐµÑ€ÑˆÐµÐ½Ð½Ñ‹Ñ Ð Ñ€Ð¾Ñ†ÐµÑÑÐ¾Ð², включая OJT. · Соблюдайте все Рроцедуры Ро уборке и уборке. · Соблюдение Ð²ÑÐµÑ Ð½Ð¾Ñ€Ð¼ качества, безоРасности и санитарии. Требования к образованию СПЕРИФИКАРИЯ РАБОТЫ: Минимальное образование: · ДиРлом средней школы или эквивалент ПредРочтительное образование: · От одного до Ð´Ð²ÑƒÑ Ð»ÐµÑ‚ Ñ‚ÐµÑ Ð½Ð¸Ñ‡ÐµÑÐºÐ¾Ð³Ð¾ колледРа/обучения или эквивалентного Сертификаты/лицензии: · Планер и силовая установка FAA (или украинский аналог) Требования к оРыту Навыки и умения: · ИнтерРретация чертеРей, сРецификаций и ÑÑ ÐµÐ¼ частей/комРонентов самолета. · Навыки решения Рроблем и самостоятельного Рринятия решений · Ñ Ð¾Ñ€Ð¾ÑˆÐ¸Ðµ коммуникативные навыки · Проявляйте здравый смысл Рри работе с людьми в командной среде, а такРе Рри обслуРивании и обесРечении безоРасности Ð²Ð¾Ð·Ð´ÑƒÑˆÐ½Ñ‹Ñ ÑÑƒÐ´Ð¾Ð². Машинные навыки: · Работать ручным и электроинструментом · Калькулятор, ПК, телефон и факсимильный аРРарат Квалификация Условия окруРающей среды: · воздействие Рогоды. Работы могут выРолняться на открытом Ð²Ð¾Ð·Ð´ÑƒÑ Ðµ Физические требования: · СРособность Родниматься Ро лестнице, сидеть, стоять, Рриседать в течение длительного времени. Физическая сила: · Требования к зрению: сРособность настраивать зрение, чтобы сфокусировать объекты. коммуникация: · Рффективно общаться с другими в рабочей среде и внешними клиентами Рредставление: · Представлять комРанию Ррофессионально и Розитивно Контакты: · Обмен информацией с сотрудниками и внешними клиентами We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, including sexual orientation and gender identity or expression, national origin, disability status, protected veteran status, or any other characteristic protected by law.

We are Generac, a leading energy technology company committed to powering a smarter world. Over the 60 plus years of Generac's history, we've been dedicated to energy innovation. From creating the home standby generator market category, to our current evolution into an energy technology solutions company, we continue to push new boundaries. The Mechanical Engineer II-Engines plays an important role in advancing the design and performance of internal combustion engines (ICE), through engine development, data-driven analysis, testing, and design of system components. This position leverages data analytics, ATI Vision, and data acquisition tools to optimize system behavior, improve engine control, improve product reliability, and increase engine performance across a range of gaseous fueled applications. Major Responsibilities: Develop engine systems and components for engine performance using design reviews, testing, problem solving, and calculations to support engine and generator design. Conduct testing to evaluate the engine and systems relative to performance and emissions. Conduct system analysis using development processes to aid in optimizing the transient, emissions, and steady-state performance of the engine/generator. Interpret testing results and collaborate with cross-functional teams through design reviews and technical discussions to guide product development. Contribute to the development of engine workflows and analysis best practices to improve group efficiency and accuracy. Document project objectives, methods, and results using standardized reporting formats. Apply data analysis techniques, including Matlab/Simulink or Python-based scripting, and machine learning to support predictive modeling and performance forecasting. Stay informed on relevant technologies, tools, and industry trends to support continuous improvement. Minimum Job Requirements: Education: Bachelor's degree in Mechanical Engineering or Electrical Engineering, or related discipline Work Experience: 2 or more years of relevant work experience Knowledge, Skills, and Abilities: Experience in new IC engine design and development. Ability to create systems for internal combustion engines, including understanding of the effects of spark control, adjusting AFR for best performance and emissions, PID settings for best transient performance, MAP based control, calibrating w/EGR, and calibrating with a catalyst. Develops, tests, and integrates complex components and evaluates overall effectiveness, cost (including cost/benefit analysis), reliability (risk analysis), and safety. Designs, develops, executes, and evaluates testing, product specifications, and process validation plans for a variety of complex products and/or components. Ability to perform detail-oriented work with a high degree of accuracy on multiple projects. Good knowledge of internal combustion engine performance development and specification. Strong analytical and problem-solving skills, with a deep understanding of internal combustion engine design, operation, and testing. Written and verbal communication skills with the ability to clearly interpret and present complex simulation results to technical and non-technical audiences. Familiarity with machine learning and predictive analytics techniques applied to engine performance and emissions modeling. Collaborate with internal manufacturing partners, contract manufacturers, designers, and product specialists to optimize complex and advanced designs for performance. Preferred Job Requirements: Education: Master's degree in mechanical engineering, Aerospace Engineering, Computer Science, or a related field of study Work Experience: 3 years of hands-on experience in engine and engine system development 3 years of experience applying MATLAB/Simulink and Python in internal combustion engine design 3 years of experience using ATI Vision for calibrating internal combustion engines 2 years of experience in an Automotive, Development, or a related engineering discipline 2 years of hands-on experience with engine and engine component development 2 years of experience in powertrain data collection and analysis - ATI/CAN or similar 1 year of hands-on experience with ATI Vision as applied to engine control systems 1 year of experience in exhaust aftertreatment simulation with GT-Suite/GT-xCHEM or CHEMKIN. Knowledge, Skills, and Abilities: Comprehensive knowledge of internal combustion engines and effective engine test methods Experience with MATLAB/Simulink, Python, C/C+, Labview, Targetlink, Vision, ETOS or similar to modify embedded control software Extensive experience with internal combustion engine performance development and specification Demonstrated written communication and presentation skills Ability to apply engineering knowledge and experience to improve products, services and processes Data analysis and control/diagnostic feature creation skills Familiarity with systems engineering based problem solving Proven ability to work well with others as part of a diverse global team Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear; and use hands to manipulate objects or controls. The employee is regularly required to stand and walk. On occasion the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 - 50 pounds. Specific conditions of this job are typical of frequent and continuous computer-based work requiring periods of sitting, close vision and ability to adjust focus. Occasional travel. “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any other characteristic protected by law.”

Job Description Plant Reliability Mechanic - Industrial Systems A Day in the Life Your shift kicks off at 2:30pm. You walk the line, complete visual inspections, check fluid levels, and lubricate key points. A sensor reads off-no problem. You calibrate the gauge, tighten a coupling, and clean the assembly. A runtime inspection flags an anomaly, so you launch a diagnostic test, evaluate performance data, and pinpoint the issue using your tools and experience. Before the night ends, you document work performed, record parts used, and note a recommendation for a future adjustment. On another week, you're on third shift (10:30pm - 6:30am), rotating weekends as scheduled. You'll train on first shift at the outset so you're set up for success. Between calls, you verify shop tools are in good condition, update inventory, place an order, and check incoming parts against receipts. A project ticket comes in-assist with the relocation of a machine center. You reference schematics, blueprints, manuals, and Process & Instrumentation Diagrams (P&IDs) to get it done safely and efficiently. About Greif Greif operates in 40 countries and leads the way in performance packaging-delivering trusted, innovative, and tailored solutions across some of the fastest-growing industries. Learn about our Customized Polymer, Sustainable Fiber, Durable Metal, and Integrated Solutions at ************** Follow Greif on Instagram and LinkedIn. Vision: Be the best customer service company in the world. Purpose: Create packaging solutions for life's essentials. How You'll Make an Impact Carry out preventive maintenance tasks per PM procedures to maximize uptime. Perform inspections, adjust/align components, change out parts, and calibrate sensors and gauges. Run diagnostics to assess condition, performance, and functionality of equipment. Troubleshoot using tests, symptom evaluation, and diagnostic tools to identify root causes. Select required materials, replacement parts, and tools to complete minor to moderate repairs. Accurately document work: parts consumed, steps taken, and recommendations for future repairs or adjustments. Keep shop tools and equipment in peak condition through routine checks and maintenance. Manage stock: inventory counts, ordering, receiving, and verification against receipts; request replenishment of common items. Support installations, modifications, and relocations of machinery and equipment. Follow technical documentation-sketches, diagrams, manuals, blueprints, schematics, and P&IDs. Share feedback on recurring issues and collaborate with the team. Complete all paperwork: work orders, parts requests, RCA reports, PM/runtimes, and downtime reports. Take direction from senior mechanics; assist junior mechanics with routine questions. Commit to operational and company safety procedures at all times. Other duties as assigned. Schedule Second Shift: 2:30pm - 10:30pm Third Shift: 10:30pm - 6:30am Rotating weekends and training on first shift are required. Your Toolkit High School diploma (or equivalent) and typically 2-4 years of relevant experience. Hands-on ability with hand, power, and specialty tools; confident using diagnostic equipment. Working knowledge of automated industrial machinery plus electrical, hydraulic, and pneumatic systems. Can read/interpret electrical and mechanical drawings and work orders. Skilled problem-solver who clearly communicates issues and solutions. Comfortable juggling multiple priorities in a fast-paced environment. Experienced in troubleshooting, disassembling, and reassembling manufacturing equipment. Strong written and verbal communication; effective with limited supervision. Proficient with Microsoft Office and related software. You're Proficient In Mechanical Troubleshooting Skills Hydraulics Experience Pneumatics Troubleshooting Maintenance and Repair Skills Experience in a Manufacturing Environment Grow with Greif At Greif, your work has purpose. Colleagues care about your well-being, and you'll have the chance to grow and thrive. Service and leadership are at the heart of our culture, and our global presence lets us do good around the world. #LI-NG1

Job Description Join the dynamic team at Asphalt Contractors, Inc, a reputable family-owned business based in Union Grove, WI, with over 40 years of excellence in the industry. We take pride in being a full-service paving contractor that not only provides top-notch services but also produces and sells high-quality asphalt and aggregate products. Our company values safety, teamwork, growth opportunities, and building strong relationships within our communities. BENEFITS: Compensation based on skills, education and experience. Comprehensive Health, Dental, Vision & Life Insurance Retirement and Company Match Program Paid holidays Opportunities for career growth and advancement. As the Lead Mechanic at Asphalt Contractors, Inc., you will play a crucial role in ensuring the smooth operation and maintenance of our equipment fleet. Your expertise and experience will be essential in keeping our machinery in optimal condition to deliver high-quality services to our clients. You will be responsible for diagnosing, repairing, and performing preventive maintenance on various construction equipment, including but not limited to asphalt pavers, rollers, skid steers, and trucks. KEY RESPONSIBILITIES Manage and work alongside team of mechanics diagnosing malfunctions and performing vehicle and equipment repairs including adjust/test steering, electrical, cooling, lubricating, braking systems, drive trains, suspensions, power steering units, clutches, transmissions and oil, temperature, gas regulating components, adjust/test/rebuild engines, hydraulics, making adjustments and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, control linkages, etc, in accordance with all relevant Federal, State and local guidelines and requirements. Ensure equipment availability by completing preventative maintenance schedules, installing component and part upgrades, controlling corrosion, and executing winterization procedures, among others. Conduct test-drives to ensure that repairs effectively resolve the identified problems. Approve all major repairs before vehicles or equipment are released from the maintenance facility. Maintain a safe, clean, and productive maintenance facility, ensuring compliance with all relevant Federal, State/Provincial, and local guidelines and requirements. Keep comprehensive vehicle records by meticulously annotating services and repair logs. Perform road calls and on-the-road repairs as needed to provide timely and efficient services. Demonstrate flexibility in working hours to promptly address repairs and diagnostics while maintaining high-quality standards. JOB QUALIFICATIONS: Minimum of 5 years of heavy truck fleet mechanic repair experience, accompanied by one to two years of supervisory experience. Possession of a CDL Class A license is required. Strong diagnostic, electrical, and AC skills are essential for this role. Prior work experience and expertise in troubleshooting and repairing skidsteers, asphalt rollers, mid-sized wheel loaders, etc. Technical knowledge of major vehicle systems and diesel equipment is a must. Previous fleet experience, including familiarity with diesel and gasoline systems. Must have the recommended minimum Hand tools for a Diesel Technician. Demonstrated ability to exercise good judgment and decision-making skills. At Asphalt Contractors, Inc, we embrace diversity and are proud to be an equal opportunity employer operating under an affirmative action plan. Join our team and be a part of an organization that values its employees, fosters a positive work environment, and prioritizes professional development. Take the next step in your career and become a crucial part of our dedicated team at Asphalt Contractors, Inc! #hc148730

KEEP AIRCRAFT READY FOR TAKEOFF - NOW HIRING AVIATION FUELERS! The Aircraft Fueler ensures safe and efficient aircraft refueling by operating fuel trucks, conducting inspections, managing emergencies, maintaining records, and collaborating with airline personnel to support airport safety and operations. WHAT IT'S LIKE TO WORK AS AN AIRCRAFT FUELER Maintain accurate records of fueling transactions Perform daily quality control inspections on equipment, ensuring cleanliness and functionality Utilize fuel trucks, hydrant carts, and stationary carts to refuel aircrafts Ensure accurate loading and balancing of fuel Conduct defueling procedures as required Exhibit consistent and dependable attendance Exemplify PrimeFlight customer service and safety standards Perform any additional duties as assigned by management WHY WORK FOR PRIMEFLIGHT? Enjoy benefits like 401(k) with matching, health, dental, vision, and life insurance, paid time off, growth opportunities, and more (*part-time benefits may vary) We are committed to being a leading provider of commercial services within the aviation industry Our teams focus on maintaining a positive working environment and treating all team members with respect With more than 200 locations across the world, we offer opportunities for career progression Enjoy a competitive pay scale QUALIFICATIONS 18 years of age or older Eligible to work in the United States Must have a valid state-issued driver's license with an acceptable driving record Communicate effectively in English (reading, writing, speaking) Basic math skills Ability to access and interpret information in print and electronically, including the use of electronic devices including IPads/Tablets, Computers, and Mobile Devices Effectively communicate with colleagues and clients, both in-person and through electronic means Pass a background check and drug screen Eligibility to acquire needed credentials and clearances (FAA, TSA, Port Authority, U.S. Customs and U.S. Postal- as applicable) Airlines are 24/7, so we need our team members to be flexible to work various shifts including nights, weekends and holidays To perform this job successfully, an individual must be able to perform each essential requirement satisfactorily. The requirements listed above are representative of the work environment, knowledge, skill, and/or ability. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential requirements. PHYSICAL ACTIVITY/WORKING CONDITIONS MAY INCLUDE: Ability to lift up to 70 pounds Prolonged standing and walking in an indoor/outdoor environment as applicable Must be able to reach with arms and grasp with hands Must be able to push, pull Must be able to crawl and crouch, at times, in confined tight spaces Must be able to bend, stretch, squat, kneel Must be able to climb and work at elevated heights Exposure to moderate and at times high noise levels Exposure to Biohazards and/or Chemicals Exposure to outdoor elements Be able to hear and respond to the spoken voice and to audible alarms Tasks may involve repetitive motions of the arms, wrists, hands and/or fingers Specific vision abilities required for this job include: Close vision (clear vision at 20 inches or less); distance vision (clear vision at 20 feet or more); peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point); depth perception (three-dimensional vision, ability to judge distances and spatial relationships); ability to adjust focus (ability to adjust the eye to bring an object into sharp focus) The pay rate listed on this post is what the company reasonably expects to pay for this position. However, individual compensation may vary based on factors including qualifications, skills, competencies, education, and experience. PrimeFlight Aviation Services, Inc. is proud to be an equal-opportunity employer. All applicants and employees are considered and evaluated for positions at PrimeFlight Aviation Service, Inc. without regard to race, ethnicity, religion, color, sex, gender, gender identity or expression, sexual orientation, national origin, ancestry, uniform service member and veteran status, marital status, pregnancy, age, protected medical condition, genetic information, disability, or any other protected status in accordance with all applicable federal, state/province, and local laws. SMS/Text Communications By providing your mobile number and opting in, you consent to receive SMS messages from PrimeFlight related solely to recruiting and employment opportunities, such as job postings, application status updates, or interview scheduling. Consent is voluntary and not a condition of applying for employment. Message frequency may vary. Standard message and data rates may apply. Reply STOP to opt out or HELP for assistance. Carriers are not liable for delayed or undelivered messages. Numbers will be used in accordance with this Privacy Policy and not shared for marketing without consent.

> At Lakeside Foods and our family of companies, we're committed to providing wholesome foods to enrich people's lives through food. We are a culture that pursues our vision of growth and innovation with passion, confidence, and commitment. We are strongest together - valuing collaborative contribution, transparency and new ideas to enable change and growth. We are committed to an inclusive and respectful environment that promotes a healthy work-life balance, and there's a seat at the table for you. Become One of Our Valued Mechanics: Here at Lakeside Foods, our maintenance team is the backbone of our operations, ensuring equipment runs optimally while taking care of the facility. Maintenance mechanics/technicians are respected "Jack of All Trades" team members, performing mechanical and fabrication updates and using their knowledge to improve production processes. If you are a creative problem-solver who perseveres through challenging equipment repairs, we want to talk with you. What You'll Get: * Competitive wages based on experience and Mechanical placement test * Off-season schedule: Four 10's Monday - Thursday * Production season (July - November): Flexible scheduling with OT availability * Stable work environment with a growing company * Schedules to maintain work/life balance * Excellent market-leading low cost medical insurance, dental and vision insurance * Paid vacation and personal time after 30 days of employment * Retirement plan with company match * Prescription safety glasses & safety shoe reimbursement * Advancement opportunities * Paid onsite training * Broken tool replacement program What You'll Do: * Responsible for the efficient flow of product through the assigned area and the minor repair and maintenance of all machinery in the assigned area. * Train seasonal in the proper, safe, and efficient operation of the machinery to which they are assigned. * Supervise seasonal employees in their day-to-day duties. * Handle minor personnel problems. Refer major problems to the Supervisor. * Will assist in any number of maintenance activities including assisting machine repair/overhaul, * cleaning, building walkways and work platforms, and assisting in the installation of new processing * equipment. What You'll Bring: * High school diploma or general education degree (GED) and six months to one year related experience and/or training.Positive attitude * Must possess a complete set of tools for industrial maintenance. * Must have general knowledge of both gas and arc, how to cut and thread pipe, bolt and thread sizes, how to fasten pulleys and sprockets on shafts, and how to adjust conveyors. * Strong work ethic * Safety mindset Where You'll Work: WELCOME TO BELGIUM Located off of I-43, just 30 miles north of Milwaukee, 8 miles north of Port Washington, and half way between Chicago and Door County, Belgium offers year round activity for visitors. From the Harrington Beach State Park, the Ozaukee Interurban Trail and other opportunities such fishing, boating, running, biking there is something for everyone no matter what time of year! Lakeside Foods and our family of companies welcomes people of all backgrounds and the varied ideas they bring to the workplace. Being an equal opportunity and affirmative action employer is part of our heritage and culture. We recruit, hire and promote employees based on qualifications and merit, without regard to race, religion, age, gender, disability, marital or veteran status. Lakeside Foods participates in E-Verify. M/F/D/V Nearest Major Market: Milwaukee

Job Description Our client has been synonymous with dependability and quality in the air freight industry since 1986. As the company has grown, so has the number of industries it serves. Today, the company continues to provide the most excellent customer care-driven service to the air freight industry and many others. By carrying over the core belief structure forged in the air freight business of providing the customer what they want on time and at a competitive rate, our client can provide superior air freight services to our growing list of satisfied customers. They are currently recruiting for an A&P Mechanic job in Milwaukee, WI. What Is In It For You Position Type: Permanent - Full-time Benefits: Health, Dental, Vision, Life, STD/LTD, Vacation Pay, Sick Pay, Holiday Pay, 401(k) A Day In The Life of an A&P Mechanic The position you are applying for will be under general supervision. You are responsible for the maintenance, modification, and servicing of aircraft and aircraft components following the manufacturer's specification and FARS. Essential Duties of The A&P Mechanic Perform routine scheduled maintenance and aircraft inspection by ACC's and current manufacturers' specifications. Read and interpret aircraft maintenance manuals and specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components. Modifies aircraft systems or components following drawings, engineering orders, and technical publications. Assemble and install electrical, mechanical, hydraulic, and structural components and accessories using hand and power tools. Provide emergency/unscheduled repairs to minimize aircraft downtime. Requires ability to travel. Review maintenance records and flight logs to schedule prescribed maintenance checks and overhauls. Process all necessary documentation and paperwork for processes completed. Follow all clean-up and housekeeping procedures. Comply with all quality, safety, and sanitation regulations. JOB SPECIFICATIONS Minimum Education: High School Diploma or equivalent Preferred Education: One to two years of technical college/training or equivalent Certifications/Licenses: FAA Airframe and Powerplant Minimum Experience: Up to three to five years or more experience Preferred Experience: Up to six years or more experience Skills: Interpret drawings, specifications, and schematics of aircraft parts/components. Problem-solving and independent decision-making skills Good communication skills Exercise good judgment in working with people in a team environment as well as in aircraft maintenance and safety. Machine Skills: Operate hand and power tools Calculator, PC, telephone, and fax machine Environmental Conditions: Exposure to weather. Work may be performed of doors Physical Demands: Ability to climb ladders, sit-stand, crouch bend for extended periods Physical Strength: Vision Requirements: Accommodation: The ability to adjust vision to bring objects into focus Communication: Communicate effectively with others in the work environment and external customers Representation: Represent the company in a professional and positive manner Contacts: Exchange information with employees and external customers If you are interested in the A&P Mechanic job in Milwaukee, WI, apply today! This vacancy is being advertised by Total Aviation Staffing, LLC. The services advertised by Total Aviation Staffing, LLC are those of an Employment Agency

Aircraft Mechanic III (23023): Leads a team in the performance of aircraft maintenance, inspections, and scheduled / unscheduled maintenance. Processes the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. Capable of performing, supervising and inspecting the duties of Mechanic Is, IIs and IIIs. A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Mechanic III / Maintenance Control Supervisor Functions: The Contractor Aircraft Mechanic III shall be able to release aircraft safe for flight using local Safe For Flight checklist, assign project/priority codes and direct cannibalization actions to meet the unit's maintenance plan and daily flight schedule. The government maintains the authority to release aircraft safe for flight when determined necessary. Final review and acceptance of aircraft prior to flight will reside with the pilot in command by signing an Aircraft Inspection and Acceptance Record “A” sheet. The Contractors training and qualification program shall include procedures used to train and designate contractor employees to certify aircraft safe for flight. Primary focus of the Aircraft Mechanic III is to manage the CFT priorities. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Airframe/Structural, Landing Gear, Hydraulic/Pneumatic, Mechanical Flight Control Systems, Power Plants and related Sub-Systems, Fuel and Air Systems, Hydraulic/Pneumatic Systems, Flight Control Systems, Avionics/Electrical Systems and related Sub-Systems, and Aircraft Logs and Records Administration Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. Aircraft Mechanic III shall have experience writing with clarity and technical accuracy, and exhibit leadership and ensure adherence to all applicable policies and procedures. Possess a high degree of expertise in the control and coordination of aircraft maintenance. Thorough working knowledge of applicable maintenance/technical manuals and publications. Thorough working knowledge of aircraft maintenance records. Working understanding of the aircraft and aircraft systems Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Aircraft Organizational Level (O-Level) Maintenance Support, General Aircraft Maintenance, Corrosion Prevention, Detection, and Abatement/Repair as required for KC-130J aircraft Maintain assigned aircraft/aeronautical equipment in a manner that meets or exceeds the requirements of the CNAFINST 4790.2 (series) programs IAW the Performance Work Statement (PWS) Scheduled and unscheduled Organizational (O-Level) Maintenance Support Maintenance Control planning and management Aircraft maintenance action documentation via records, forms, and electronic means Support Equipment operations and inspections Aircraft inspections Aircraft Movement Corrosion Control/Aircraft Painting Troubleshooting Preservation and de-preservation General aircraft maintenance Technical Directive compliance and modifications Initiate and Complete Maintenance Action Forms via Optimized Organizational Maintenance Activity (OOMA) or hard copy. Certify Aircraft Safe For Flight Vibration Analysis Operator / Interpreter Tire and Wheel Hydraulic Contamination APU operations Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Other duties as assigned Preferred Qualifications: 15 years or more of Organizational level maintenance 5 years or more maintenance experience on KC-130J aircraft Collateral Duty Quality Assurance Representative (CDQAR) for Airframes, Power Plants, and/or Avionics Systems Qualified as Vibration Analysis Operator/Interpreter Tire and Wheel certified Hydraulic Contamination APU Operator Aircraft Tow qualifications as wing walker, Tow Supervisor, and driver Aircraft paint and final finish Basic Qualifications: Aircraft Mechanic III shall have a minimum of five years aircraft maintenance experience NALCOMIS OOMA Familiarization/Naval Aviation Maintenance Control Management Course (Course D/E-555-0053 OR A COMBINATION OF NALCOMIS OOMA Familiarization Course (Course D/E-555-0054) and Naval Aviation Maintenance Control Course (Course D/E-555-0040) Previously Safe for Flight certified Must be eligible for Common Access Card (CAC) Must be deployable to locations Outside Continental U.S. (OCONUS) Employment is contingent on a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; (d) your ability to get a required clearance by your effective start date, if needed, and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets