Aircraft technician entry level jobs - 44 jobs

Sierra West Airlines is a family-owned aviation company supporting both cargo and passenger operations. We are seeking an A&P Mechanic to join our maintenance team in Toledo, Ohio. This role provides hands-on aircraft maintenance experience in an active operational environment, supporting day-to-day flight operations across affiliated companies. Position Scope This position supports maintenance operations for affiliated Part 135 and Part 125 operators, with work performed primarily under the Company's FAA Part 145 Repair Station. As business needs evolve, this role may also support future customers operating under FAR Part 121, etc. Job Duties Inspect, troubleshoot, and perform aircraft maintenance and repairs on B737, Lear 60, and SA227 aircraft in accordance with approved data Read, analyze, and interpret maintenance manuals, technical procedures, electrical schematics, company policies, and applicable Federal Aviation Regulations (FARs) Perform routine and non-routine maintenance tasks Perform maintenance on ground support equipment as needed Work outdoors and in varying weather conditions as required Support aircraft recovery efforts and maintenance needs across operating locations Perform other duties as assigned Qualifications FAA Mechanic Certificate with Airframe and Powerplant ratings Open to mechanics with limited experience who are eager to gain hands-on exposure in cargo and passenger operations Passport or ability to obtain a passport within 60 days of hire Must be at least 18 years of age Eligibility to work in the United States Valid driver's license Ability to lift up to 75 lbs., climb ladders, and maneuver around aircraft Successful completion of pre-employment DOT drug screening and required background checks Ability to obtain and maintain an airport SIDA badge Willingness and ability to travel for aircraft recovery, support other bases, or meet operational needs Ability to work various shifts, overtime, and occasional after-hours callouts as required Benefits Competitive compensation, commensurate with experience and base location Health, Dental, and Vision benefits (employee + dependent options) 401(k) with company match PTO accrual for vacation and sick time Family-owned company with an emphasis on work-life balance Flexible scheduling based on operational needs Required training provided as applicable to the role Sierra West Airlines is an equal opportunity employer. We believe in creating an inclusive environment for all employees and applicants. We comply with applicable laws regarding equal opportunity and affirmative action. We provide employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. We are committed to providing reasonable accommodations for qualified applicants with disabilities and disabled veterans, consistent with applicable law and FAA safety and regulatory requirements. If you require assistance during the application process, please contact *********************.

Job DescriptionSalary: $27-$30/hr TAS Aviation, a nationally recognized leader in Twin Cessna aircraft repair, is looking for passionate and experiencedA&P Techniciansto join our skilled team. If you thrive in hands-on, dynamic environments and have a passion for aircraft maintenance, this is your opportunity to work at a top-tier facility where innovation, safety, and aviation excellence come together. As anA&P Technicianat TAS Aviation, you'll work on cutting-edge projects in piston engine and turboprop aircraft, helping to keep our clients' aircraft operating at peak performance. Your role will directly contribute to our mission of delivering exceptional service in accordance with FAA regulations. Why TAS Aviation?At TAS Aviation, we believe in investing in our teams growth. You'll be part of a close-knit community of aviation professionals, working with the latest technologies and supported by a company that values your contributions. With opportunities for advancement, ongoing education, and competitive benefits, youll find both a rewarding career and a supportive workplace. We're only looking for those who are interested in being part of a fast growing and exciting company that is willing to take on challenges and help themselves and TAS become better. All other need not apply. What Youll Do: Perform both scheduled and unscheduled maintenance, ensuring the highest safety standards. Inspect, diagnose, and troubleshoot aircraft systems, identifying necessary repairs and solutions. Carry out repairs and maintenance on various aircraft systems, ensuring adherence to FAA regulations and TAS Aviation standards. Maintain accurate records in compliance with FAA regulations. What Were Looking For: Active A&P Certificate Preferred. Experience with piston engine strongly preferred. Experience with turboprop and turbine engines - preferred but not required. Solid understanding of General Aviation aircraft systems and components. Attention to detail, self-motivation, and the ability to think critically in dynamic environments. Strong communication skills and the ability to collaborate with a team. Ability to pass a background check and drug screening. What We Offer: Competitive pay ranges from $27 to $30/hour, based on experience. Comprehensive benefits include free medical insurance, 401(k) match of 100% up to 6% and vested on day 1. Opportunities for raises and promotions based on performance. Tuition reimbursement and opportunities for continuing education to support your growth. Discounted flight rental and flight training for those who qualify, helping you further explore your passion for aviation.

The Performing Arts Center (PAC) Substitute Technician is hired on a call-in basis to assist the PAC Technical Director and Assistant Technical Directors to prepare, run, and strike the technical aspects of any events at Clark State College and its Performing Arts Center and Conference Center. Duties Include: * Unload Technical Theatre gear from trucks and semis * Hanging, circuiting, gelling, focusing, and programming lights * Running Follow spots * Setting up Audio equipment * Moving masking * Setting up Orchestra Shell * Installing Pit Seats * Striking all Equipment following shows * Being on a running crew during a show * Other duties to ensure the highest quality live event Requirements: * High School diploma required * Technical Theatre background preferred * Ability to lift 50 pounds * We will train you Hours: Varied including weekends and nights. May not exceed 28 hours a week.

About Us: Premier Private Jets is a distinguished provider of comprehensive business aviation services, including Charter, Maintenance, Repair, and Overhaul (MRO) [PremierMRO], and Fixed Base Operations (FBO) [PremierFBO]. With a commitment to excellence, we ensure our clients receive unparalleled service across all divisions. We are currently seeking candidates for the position of Avionics Technician Level 1, at our Dayton, Ohio location. This position will report to the Avionics Department Lead/ Avionics Manager. Duties and Responsibilities Safely perform aircraft scheduled and unscheduled maintenance actions and inspections following applicable technical data in the performance of all aircraft and component maintenance under minimal supervision per the aircraft manufacturer's specific maintenance program or AAIP. Coordinate with management, assigned supervision and Inspection to ensure compliance with internal and FAA paperwork, signoffs and quality specifications using the Corridor maintenance program. Ensure that all inspections are properly conducted, and that the proper inspection records, reports and forms used by the repair station are properly executed prior to releasing the product for return to service. Follow standard operating procedures assigned from management and as directed by the aircraft manufacturers maintenance manual specifications when using aircraft maintenance tools and equipment such as electrical, hydraulic power and aircraft pressurization carts, aircraft jacks, calibrated tools, etc. Properly care for and maintain all required maintenance and facility equipment and tools. Read and understand the Repair Station/Quality Control Manual # PPJR496E and any referenced forms, manuals, or supplements referenced within the listed documents. Keep current with the latest revisions of all technical data within one's area of expertise on all articles repaired by the repair station. This data will include manufacturers' overhaul manuals, service bulletins, part specifications, related FAA approved data and other required technical data used by the repair station Ensuring the proper handling and preservation of all units/parts while in the work process, installation, and storage. Ensure the proper tagging and identification of all parts and components as outlined in CFR PPJR496E. Determine that no defective, unserviceable, or un-airworthy parts are installed in any component or aircraft released by the repair station. Periodically review, record, and document on-the-job training on form PAT-DAY-0003 as required. Provide documentation to the quality assurance department of all OJT & formal training to be incorporated into repair station personnel files. Maintaining currency requirements for all special authorizations as required by repair station duties. Comply with all safety and housekeeping policies. Use personal protective equipment and ensure the aircraft exterior and interior are properly protected (PTP). Perform other duties as assigned Benefits: Medical, dental, vision, and life insurance Supplemental life insurance Short-term and long-term disability PTO, sick, and company paid holidays 401k with company match Requirements Qualifications: Must be an FAA certified Aircraft A&P Mechanic (FAA Certificate Required) or working toward gaining an FAA repairmen certificate. Prior military experience with an MOS rating an airframe, or powerplant, or both licenses due to military training and experience per FAA AC 65-30B maintenance technician and military occupational specialty codes may be substituted with corporate aviation experience. Entry level with up to 36 months of corporate aviation experience. Must be able to pass a 10-year background check and be assigned to a FAA mandated drug screening program. Must be an A&P or working to gain a repairmen certificate using documented OJT training. Wire harness fabrication and basic troubleshooting experience preferred. Must be willing to participate in ongoing training and increase technical capabilities. Must be team oriented, self-driven and safety conscious demonstrating a positive behavior and attitude. Must be goal-oriented and driven to meet and/or exceed quality maintenance actions and expectations. Must have problem-solving skills. Ability to read, write, speak, and understand the English language fluently to meet FAA regulations. Ability to read and interpret blueprints and engineering documentation. Ability to use standard aircraft mechanics tools, equipment, and materials in the aircraft maintenance process. Able to climb ladders and stairs and must be able to work at heights to include from a 20' ladder or aerial lift. Perform close tolerance work, work in small spaces, lift objects up to 40 pounds. Must be computer literate. Knowledge of Corridor Maintenance Program, MS Office programs, especially Outlook, is a plus.

Job DescriptionDescription: About Us: Premier Private Jets is a distinguished provider of comprehensive business aviation services, including Charter, Maintenance, Repair, and Overhaul (MRO) [PremierMRO], and Fixed Base Operations (FBO) [PremierFBO]. With a commitment to excellence, we ensure our clients receive unparalleled service across all divisions. We are currently seeking candidates for the position of Avionics Technician Level 1, at our Dayton, Ohio location. This position will report to the Avionics Department Lead/ Avionics Manager. Duties and Responsibilities Safely perform aircraft scheduled and unscheduled maintenance actions and inspections following applicable technical data in the performance of all aircraft and component maintenance under minimal supervision per the aircraft manufacturer's specific maintenance program or AAIP. Coordinate with management, assigned supervision and Inspection to ensure compliance with internal and FAA paperwork, signoffs and quality specifications using the Corridor maintenance program. Ensure that all inspections are properly conducted, and that the proper inspection records, reports and forms used by the repair station are properly executed prior to releasing the product for return to service. Follow standard operating procedures assigned from management and as directed by the aircraft manufacturers maintenance manual specifications when using aircraft maintenance tools and equipment such as electrical, hydraulic power and aircraft pressurization carts, aircraft jacks, calibrated tools, etc. Properly care for and maintain all required maintenance and facility equipment and tools. Read and understand the Repair Station/Quality Control Manual # PPJR496E and any referenced forms, manuals, or supplements referenced within the listed documents. Keep current with the latest revisions of all technical data within one's area of expertise on all articles repaired by the repair station. This data will include manufacturers' overhaul manuals, service bulletins, part specifications, related FAA approved data and other required technical data used by the repair station Ensuring the proper handling and preservation of all units/parts while in the work process, installation, and storage. Ensure the proper tagging and identification of all parts and components as outlined in CFR PPJR496E. Determine that no defective, unserviceable, or un-airworthy parts are installed in any component or aircraft released by the repair station. Periodically review, record, and document on-the-job training on form PAT-DAY-0003 as required. Provide documentation to the quality assurance department of all OJT & formal training to be incorporated into repair station personnel files. Maintaining currency requirements for all special authorizations as required by repair station duties. Comply with all safety and housekeeping policies. Use personal protective equipment and ensure the aircraft exterior and interior are properly protected (PTP). Perform other duties as assigned Benefits: Medical, dental, vision, and life insurance Supplemental life insurance Short-term and long-term disability PTO, sick, and company paid holidays 401k with company match Requirements: Qualifications: Must be an FAA certified Aircraft A&P Mechanic (FAA Certificate Required) or working toward gaining an FAA repairmen certificate. Prior military experience with an MOS rating an airframe, or powerplant, or both licenses due to military training and experience per FAA AC 65-30B maintenance technician and military occupational specialty codes may be substituted with corporate aviation experience. Entry level with up to 36 months of corporate aviation experience. Must be able to pass a 10-year background check and be assigned to a FAA mandated drug screening program. Must be an A&P or working to gain a repairmen certificate using documented OJT training. Wire harness fabrication and basic troubleshooting experience preferred. Must be willing to participate in ongoing training and increase technical capabilities. Must be team oriented, self-driven and safety conscious demonstrating a positive behavior and attitude. Must be goal-oriented and driven to meet and/or exceed quality maintenance actions and expectations. Must have problem-solving skills. Ability to read, write, speak, and understand the English language fluently to meet FAA regulations. Ability to read and interpret blueprints and engineering documentation. Ability to use standard aircraft mechanics tools, equipment, and materials in the aircraft maintenance process. Able to climb ladders and stairs and must be able to work at heights to include from a 20' ladder or aerial lift. Perform close tolerance work, work in small spaces, lift objects up to 40 pounds. Must be computer literate. Knowledge of Corridor Maintenance Program, MS Office programs, especially Outlook, is a plus.

Purpose Performs a wide range of basic landscaping, maintenance and resources management activities in along the Olentangy Greenway Trail as part of the Olentangy Reemployment Plan. The Olentangy Reemployment Plan is an 8 week program in partnership with the Columbus Recreation and Parks Department. Example of Duties Performs a variety of landscaping, maintenance and resource management duties including, but not limited to mowing, invasive species removal, trail maintenance, fertilizing, trimming, mulching, etc. Picks up litter and empties trash receptacles. Performs basic trail maintenance including clearing paths, trimming, and pruning using pruners, shovels, rakes, hand saws, hand axes, etc. Operates basic construction equipment including but not limited to power tools, line trimmers, mowers, chain saws, skid steers, etc. Plant, fertilize, prune, water and transplant trees. Assist in the basic construction and repair of decks, signs, tables, roadways, etc. Paints and stains. Qualifications Education/Experience Must be at least 18 years of age. Due to the temporary nature of these roles, local applicants are preferred. Must successfully complete a backround check. Language Skills Ability to communicate effectively and courteously with coworkers and general public on a daily basis. Team-Oriented Works on a team. Good customer service, communications and interpersonal skills. Attendance Being present at work is an essential function of the position. Mathematical Skills Basic mathematics skills; ability to add, subtract, multiply and divide whole numbers, fractions, decimals. Reasoning Ability Ability to carry out instructions and deal with problems involving few variables within a familiar context. Ability to work with a minimum amount of supervision. Physical Demands While performing the duties of this job, the employee is regularly required to walk, talk and hear, operate grounds maintenance and heavy equipment, lift heavy objects, operate power and hand tools, drive off-road vehicles, etc. The employee is frequently required to stand; use hands to fingers, handle, or feel objects, tools, or controls, and reach with hands and arms, etc. The employee is occasionally required to sit, climb or balance, and stoop, kneel, crouch, or crawl. Work Environment While performing the regular duties of the job, the employee regularly works in outside weather conditions. The employee frequently works near moving mechanical parts. The noise level in the work environment is usually moderate. Work Hours Schedule is typically Monday through Friday, 40 hours per week, with some possible Saturday shifts during the 8 week program. Any Additional Information Ability and willingness to cooperate with coworkers on group projects. Ability to complete routine forms. Other Information The above Description represents the essential and most significant duties of this position. It is not intended to exclude other work duties, assignments and responsibilities not mentioned herein. For more information about the Olentangy Reemployment Plan please contact: Joshua J. Simon

**The Best Teams are Created and Maintained Here.** At BrightView, the best teams are created and maintained here. If you are searching for your next fulfilling career, picture yourself on a best-in-class team where you can grow to be your brightest. We're looking for a Snow Tech. Can you picture yourself here? **Here's what you'd do:** Snow Tech you will be responsible for performing all tasks related to snow removal. Shifts are on-call and range from 6 to 12 hours and are often overnight depending on the storm event. May require longer hours for larger storms. The season starts on the first snow fall. **You'd be responsible for:** + Responsible for performing all tasks related to snow removal, including operating ATV plows, snow blowers, snow shovels and e-pokes (salt spreaders). + Work with Sidewalk-Crew Leaders as a team to efficiently and safely complete each assignment **You might be a good fit if you have:** + 18 years of age or older + Work well under pressure while observing safety guidelines with minimal supervision + Have a smart phone (to download and use our attendance tracker App) + Have dependable transportation + You must attend and pass training and a background check + Able to lawfully work in the USA **Here's what to know about working here:** Here at BrightView, we're as passionate about caring for our clients as we are about caring for each other. Though we're the nation's leading landscape company, we maintain a small company feel and supportive environment that makes our team members feel at home. If you're looking to join a team of talented go-getters who tackle big vision projects other companies could only dream of, you just might have found your match. With our range of services, including landscape design, development, maintenance and enhancements, there's no limit to what we can do, and what you can achieve. **Growing Everyday** Like the communities we serve, you are on a constant path of discovery to shape your career and personal development. In addition to best-in-class opportunities and competitive salary, you may be eligible for benefits and perks like: + Paid time off + Health and wellness coverage + 401k savings plan **Start Your Bright New Career Journey** _BrightView is an Equal Employment Opportunity and E-Verify Employer._ **Compensation Pay Range:** Pay Range for this role is $23.00-$25.00 per hour. **_BrightView offers a suite or health, wellness, and financial benefits to full-time team members. Benefits offerings for full-time team members include medical, dental, and vision insurance, ancillary and voluntary products, a 401k savings plan with employer contributions, and 6 to 9 company paid holidays per year. Employees may also be eligible to receive paid time off for vacation and/or sick leave, tuition reimbursement, and/or potential variable pay opportunities based on position and performance. A detailed benefits package will be provided during the interview process_** _._ _It's Not Just a Team. It's One BrightView._

This is an entry level position with advancement opportunities. Training is provided by our experienced staff. If you've just graduated from high school or college, finished your time in the military or are making a career change, consider employment with Vadakin, Inc. One of America's most successful, high pressure cleaning companies for over five decades, Vadakin, Inc., offers you more than a job. We offer competitive pay and benefits. Transportation is provided to the jobsite from our Marietta office. Requirements include Travel, working 12-hour shifts (days and nights), lifting 50-100 pounds on a regular basis, work at heights exceeding 100' on safety guarded metal grate, work within confined space, work in temperature variable conditions, and able to stay alert for the duration of a 12-hour shift (days and nights). Transportation is provided to the jobsite from our Marietta office. Must be able to pass a pre-employment drug test and background check prior to employment. For more information about Vadakin, Inc. please visit ******************

Are you tired of technician or maintenance jobs that don't offer you the career growth you are looking for? Do you want a job that offers more stability than turnaround work? Would you want to learn a skilled trade in the oil and gas industry? How about a new career with a company offering training, opportunities to advance, and the potential for multiple pay increases in your first year? Apply for our Entry Level position with Alliance! As a Monitoring Technician, you will work in a rapidly growing industry protecting the environment and have the opportunity to learn and advance within our rapidly growing company. We offer a starting pay rate of $22.00/hr with a clear career path for upward mobility, paid time off, great benefits, and quarterly profit-sharing bonuses. Apply now! During our comprehensive training process, you will learn the following responsibilities for the Entry Level Monitoring Technician (LDAR) position which are located onsite at our client sites: Daily monitoring of components to detect leaking equipment (valves, pumps, connectors, etc.) which can be a source of emissions and volatile hazardous air pollutants Perform and record calibrations on analyzers before use Perform preventative maintenance and troubleshooting on analyzers Identify and report changes to components while performing monitoring Identify and report new or removed components while performing monitoring Identify and report Audio Visual Olfactory (AVO) leaks, Open-Ended Lines (OEL) Identify and report components with missing identification tags Support leak repair activities at customer work sites as required Complete Job Hazard Analysis (JHA) daily Complete Equipment and Vehicle Inspections as required Complete daily paperwork (job summary, component change forms, missing tags, etc) Attend and participate in daily toolbox meetings and scheduled safety meetings Complete all safety and knowledge trainings as assigned Requirements: Ability to be on your feet for 8-10+ hours per day on uneven ground (concrete, rock, grass, mud/dirt, etc.), while wearing the monitoring backpack (weighing up to 25 lbs.) as well as carry other equipment as needed (ladders, water coolers, etc.) Love being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders to high heights (up to 300ft) Ability to understand and use hand-held device, and have some mechanical abilities (preferred) Reliable transportation to the worksites is required Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #ELLDAR

The technician is responsible for all aspects of the daily care of the Plains gartersnake and Eastern hellbender collection, under the supervision of head zookeepers. is temporary through June 30, 2026. Responsibilities Prepares and offers diets, performs water changes, cleans enclosures, and maintains equipment. Adheres to biosecurity protocols. Maintains the cleanliness and organization of work areas. Maintains accurate records on animals and equipment, makes animal observations, and collects & records biological data. May participate in field activities. Reports potential issues or concerns promptly to supervisors including, but not limited to, animal health concerns, safety issues, and facility/maintenance problems. The ability to follow written and verbal instructions and pay attention to fine details is essential. Practices good communications skills and has the capacity to work well with others while maintaining the ability to work effectively as an individual. Implements sustainable practices in daily tasks whenever possible. Ability to plan and organize work in an efficient and cost‐effective manner and without direct supervision required. Constantly strives to further the mission of the organization and avidly supports the Columbus Zoo and Aquarium, Zoombezi Bay, Safari Golf Club and The Wilds. Performs other duties as assigned. Qualifications Experience Experience in the handling and care of snakes required. Experience in the care of aquatic animals required. Experience in maintaining aquariums and aquatic life support equipment required. Experience using analytical software and programs such as Excel, ImageJ, and ZIMS preferred. Education B.S. degree in biological sciences, natural resources, animal science, or related field preferred. Applicants must have a working knowledge of natural history, biology, animal husbandry, and conservation issues as they apply to reptiles & amphibians specifically and Ohio wildlife in general. Physical Demands Must be able to lift and carry up to 50 lbs and work in inclement weather Schedule Ability to work a flexible schedule including weekends and holidays. Approximately 40 hours per week.

Temco Logistics is seeking a dependable and skilled Driver and Appliance Installer to join our team. The ideal candidate will be responsible for operating a 26 ft box truck to deliver and install household appliances to residential and commercial customers. This role requires a blend of driving expertise, physical capability, and technical proficiency to handle installations, provide exceptional customer service, and maintain a safety-first work environment. Qualifications What You'll Do: Operate a 26 ft box truck for local multi-stop delivery routes. Load, deliver, and install household appliances (washers, dryers, refrigerators, dishwashers, ranges, cooktops, etc.). Safely handle equipment using dollies, lifting straps, and handheld tools. Connect basic water lines, valves, and electrical components. Use mobile devices to confirm deliveries and maintain accurate records. Deliver exceptional customer service to homeowners, builders, and clients. Perform pre- and post-trip vehicle inspections and follow all safety protocols. What You Bring: Ability to lift/pull/push/load/unload/move 100+ lbs. using proper equipment. Strong customer service and communication skills. Comfort with GPS navigation and smartphone apps. Experience driving box trucks or delivery vehicles (preferred). Familiarity with appliance installation tools and basic plumbing/electrical (a plus!). Clean driving record and ability to pass background check and DOT physical. Why Temco? Best-in-Class Pay with dense routes - maximize earnings. Paid Training - no experience needed! Uniforms & PPE Provided Medical + FREE Dental & Vision 401(k) with Company Match Paid Time Off & Holidays Career Growth Opportunities - advance into leadership roles. Apply now and become part of a team that's redefining final mile delivery. Temco Logistics is an Equal Employment Opportunity Employer. All qualified applicants are eligible for consideration for employment without regard to disability, veteran status, or any other characteristics protected by law. Bilingual candidates are encouraged to apply. For a full list of the various benefits Temco Logistics offers visit: thd.co/temcobenefits ©2025 Temco Logistics Product Authority, LLC. All rights reserved.

Job Description Looking for Technician's All Classes of Technician's (A) Technician, (B), Technician, (C) Technician, and Entry-Level Express Technician 5 Day work week, Pay based on experience level. Requirements/Qualifications: Prior Infiniti, Nissan, and/or other relevant major manufacturer automotive experience 3 years (preferred) but not required. ASE and/or manufacturer certification, required for A & B class Technicians. C level Technician and Entry-Level Express Technician Welcome. A real team player who is focused on providing exemplary client services. Ability to multi-task in a fast paced work environment. Strong organizational skills and detail oriented. Be at 18 years of age. Operate a wide variety of cars, light trucks, and vans, with ability to drive both manual and automatic transmissions. Clean driving record. Drug free work place. Work Conditions/Responsibilities: As an "A" Class Automotive Technician you will perform vehicle repair and maintenance as assigned in accordance with dealer and factory standards: Diagnose and repair vehicle automotive systems including engine, steering, suspension, brakes, and air conditioning to required specifications. Preform vehicle inspection to identify necessary repairs. Provide labor and time estimates for all repair work. Inspect and test vehicles to determine necessary and applicable repair work. Complete necessary paperwork and documentation for service repairs. Participate in on-going company and manufacturing training, and education programs, to stay current and abreast of changing technology. Provide and maintain a basic inventory of required hand tools. Benefits: Closed Sundays / 5 day work week Paid vacations 401(K) Dental Insurance Vision Insurance Medical Insurance Employee Discount Flexible Schedule Work Location: One location and in person.

Are you interested in becoming a part of an innovative in-house maintenance facility working on private aircraft? Flexjet, an award-winning organization, is currently looking for an Interior Install Technician to join our team! Please note, this position may require working nights. This position is located in Cleveland, Ohio. DUTIES & RESPONSIBILITIES Safely perform removal, installation, and/or fabrication of aircraft interiors (which may include seats, carpets, galleys, closets, lavatories, side ledges, bulkheads, doors and panels) Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, signoffs and quality specifications Install cabin and cockpit seats and furniture Fabricates and pre-fit interior components associated with the modification specs and does simple layout on such items as O2 boxes, brackets, clips, lights and gaspers etc. Seeks methods to cross train to develop technical skills and business knowledge. Removes and installs all interior components and soundproofing materials to meet company quality standards Reads and interprets blueprints, drawings, and production procedures to determine measurements and installation procedures Measures and marks installation areas in aircraft interior, using measuring and marking instruments and templates Fits and installs items in aircraft using hand tools, power tools, and fasteners, such as screws, rivets, bolts, and speed nuts Fabricates and installs supporting structural devices such as clips, brackets, angles, gussets, and doublers, using shop equipment Tests functional performance of installed items Performs other duties as required EDUCATION & EXPERIENCE Experience in aerospace industry highly desired High school diploma or GED Able to distinguish alignment on intricate parts Advanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from composite honeycomb, fiberglass, Lexan, acrylic materials, etc. Must possess required tools and toolbox Basic computer skills Visual capacity and muscular dexterity to work on fine detail, high cost products with a minimum of errors and rework. Must be able to climb in and out of aircraft and perform work in tight or confined places and positions Requires excellent communication skills Ability to work in a team environment Must be flexible with shift work REQUIRED SKILLS Successful candidate will be highly motivated and work effectively under pressure and time constraints Must have the ability to multi-task within a team environment Strong working knowledge of Windows and MS Office programs Possess proven inspection competencies Must be detail-oriented and well organized; demonstrate excellent communication skills, and a positive attitude Specialized aircraft tooling will be furnished by the company Ability to pass background check for airport security badge WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme weather conditions. The noise level in the work environment and job sites can be loud. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 10 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

BFC Solutions, the nation's leader in HVAC preventative maintenance is growing again! We are hiring a Filter Technician for our Filter Service Department as a Full-time employee in our Toledo Ohio market. Starting pay for the Service Technician role will be up to $22.00/hour, depending on experience and qualifications. We offer the following benefits: 401(k) with employer matching Excellent advancement opportunities Company provided cell phone. Company vehicle Dental insurance Health insurance Vision insurance 8 paid holidays Paid time off As a Service Technician with Bonded Filter, you will install air filters and perform coil cleaning primarily in rooftop air ventilation and HVAC systems for retail and commercial businesses. Bonded Filter Company specializes in preventative maintenance and provides air quality solutions for some of the most recognized retail and commercial brands in America. Technician Job Requirements: FREQUENT overnight/out of town travel. For insurance purposes, to operate the company vehicle, you must be at least 21 years of age. Possess and maintain a valid Driver's License subject to continuous review. Must be comfortable with and confident working at heights up-to 40 feet above ground level and using extension ladders. Meet ladder safety requirements as defined by OSHA. Weigh less than 275 lbs due to ladder weight restriction limit Must be comfortable working outside in all weather conditions. Integrity - must act with integrity at all times. Must demonstrate a superior Customer Service attitude. Be comfortable using the Customer's & Company technology platform. Work independently with remote supervision & the Field Support Team. A typical work week will require 45 - 50 hours. Must be able to lift and carry up-to 75 pounds repeatedly. Service Technician Preferred Experience: Facility and/or grounds maintenance Construction HVAC Cable installation Route delivery and set-up As a Service Technician with Bonded Filter, we make sure to put our technicians first. We offer comprehensive benefits, pay advancement, and bonus opportunities. We give our Technicians the tools to be successful: 2 weeks of paid training, a company van, tools, uniforms, materials, as well as 24-hour support. This position offers stable year-round employment with a growing industry leader in Air Filtration Service. As an employee, you can feel confident that your health and well-being are among our highest priorities. We offer a competitive salary and benefits plan that includes-Medical, Dental, Vision, Prescription Drug, Life Insurance, 401K Savings Plan, and Paid Time Off (PTO). BFC Solutions is an Equal Opportunity Employer #IND123

At Main Event, our Technicians are responsible for maintaining the FUN! As a Technician, Tech II specifically, you are knowledgeable about the mechanics and operations of our games and entertainment options and ensure they are performing properly and safely. You are responsible for supporting the maintenance of the center's equipment, building, and systems, to name a few. You're also dedicated to delivering the highest standards in safety and sanitation. WHAT WILL YOU BE DOING DAILY? Upholding our cleanliness and safety standards (We take this seriously!) Welcome and engage with all guests while being a FUN ambassador! Performing electrical, mechanical, and technical work related to construction, repairs, preventive, and scheduled maintenance (gotta keep things running!) Troubleshooting repairs on games, tellers, pinsetters, etc. Disassembling, replacing, and repairing mechanical and electrical components or parts such as bearings, coils, armatures, and wiring Maintaining accurate inventory records Ordering supplies, tools, and materials as needed Maintaining the organization and cleanliness of the mechanic shop and facility Paid on-the-job training! POSITION REQUIREMENTS 18+ years of age 1+ years of general knowledge/skill set in the repair and maintenance of automated bowling equipment or arcade games Guest-focused mindset (We heart our Guests!) Teamwork is a must (Teamwork makes the dream work!) Strong problem-solving and multi-tasking skills Ability to learn and utilize multiple systems that support the business Skilled in practical application of electronics, mechanics, and hydraulics Basic working knowledge of hand tools; ability to use and handle tools to perform work Ability to perform work on ladders Ability to handle equipment up to 250 lbs. Knowledgeable of OSHA regulations and safety practices Ability to wear and work in personal protective equipment Can effectively communicate with Management, Team Members, and Guests Availability to workdays, nights, weekends, and holidays PERKS AND BENEFITS Main Event Team Members are expected to give their best on the job, so we do our part to make sure we give you what you need to stay motivated and valued and embrace living your best life! Awesome culture that's inclusive, rewarding, and FUN! 50% off food, beverages, activities, and unlimited gameplay! Tuition Reimbursement Program (yes, please!) We help others grow! (internal promote culture) Be part of a New Center Opening Team! Our rewards and recognition program rock! Benefits and paid time off (for those who qualify) Our Family Fund helps our Team Members financially in their time of need Become a Technician Trainer (aka, the best of the best!) Salary: Compensation is from $10.45 to $16 per hour. Main Event Entertainment is an Equal Opportunity Employer Salary Range: 10.45 - 16 We are an equal opportunity employer and participate in E-Verify in states where required.

at Ayr Wellness AYR Wellness is a publicly traded, multi-state cannabis company with more than 85 dispensaries. We are one of the largest scale producers of high-quality cannabis in the U.S., and our purpose is to be a force for good. People are at the heart of everything we do, and we are passionate about bringing progress and positive changes to our communities, our industry, and our world. Our talented and reliable team members are the foundation of our business and investing in exceptional talent is paramount to our success. The key to building a culture where everyone can thrive starts and ends with our teams. Their collective courage and kyndness sets AYR apart. Your career growth at AYR is limitless, and we believe in creating an environment where everyone can flourish and win together. Job Summary Our Cultivation Technician positions are responsible for executing cultivation plans in keeping with the Company's operating procedures for indoor and outdoor cultivation. Technicians conduct the day-to-day assignments and tasks of the cannabis production cycle. Cultivation: Cloning, cutting, and transplanting; watering; labeling; and inventory data input. Plant care during vegetative and flowering phase: trimming, manipulating, and staking; big leafing and pruning; watering; plant monitoring; inventory data input. Harvesting: Cutting plants; weighing and inventory data input into the electronic inventory tracking system. Operating and maintaining cultivation systems/equipment; stocking and handling production inputs and supplies; sanitizing and cleaning growing rooms, cultivation workspaces and tools. Duties and Responsibilities Cloning: cutting, rooting, and transplanting; clone care, watering and feeding; clone monitoring and climate control; labeling; and inventory data input into state mandated electronic tracking system. Monitors growing conditions and reviews changes in humidity, moisture and temperature and cultivation procedures to ensure conformance with quality control standards. Inspects crop to ascertain conditions such as leaf texture, bloom size and the existence of pests or disease; removing substandard or diseased plants to maintain quality standards. Plant monitoring and care during vegetative and flowering phase: trimming and staking; big leafing and pruning; plant care, watering and feeding; plant monitoring and climate control; pest and disease control; inventory data input. Harvesting: cutting plants; trimming cut plants; removing flowering tops; weighing and inventory data input into the electronic inventory tracking system. Curing: hanging and dry-racking flowers; monitoring curing process and climate control; labeling; weighing and inventory data input. Operating and maintaining cultivation systems/equipment: monitoring, calibrating, running, and maintaining lighting, irrigation, climate control and other cultivation systems; stocking and handling production inputs and supplies; sanitizing and cleaning growing areas, cultivation workspaces and tools. Ensure daily compliance with policies and procedures including but not limited to, state compliance, security protocols, and access protocols. Other duties as required or needed to assist the company in meeting goals. Qualifications Excellent communication skills Strong work ethic, reliable, flexible Commitment to producing highest quality work Ability to work in a demanding, fast-paced environment, including flexible and/or extended hours as needed Education High school diploma/GED preferred Experience Experience in the cannabis or agricultural industry not required, but preferred Competencies (Knowledge, Skills, and Attitude) Adaptable / Flexible - Effectively manages change and adjusts comfortably to new people and processes; multi-tasks and handles ambiguity and stress well while remaining positive; bounces back quickly from challenging situations; asks for help when needed and stays focused on being a force for good. Direct reports No direct reports Working conditions The person in this position may be exposed to dust, kief, cleaning chemicals and fumes. Although systems are in place to remove these byproducts, there is still exposure to some degree. Frequently works in rooms with bright light where eye protection is required. Frequently works in rooms with moderate heat and humidity. The person in this position is constantly exposed to moderate background noise due to environmental systems, equipment and fans. Physical requirements Prolonged sitting, standing and / or walking motion/movement will be required throughout the shift. Constant movement of hands/fingers and limbs; this position requires good manual dexterity, coordination and stamina. Frequently ascends/descends a ladder to inspect/maintain plants. Occasionally operates power hand tools and other cultivation machinery. Must be able to inspect and detect quality deviations and defects. Occasional lifting, positioning or moving items up to 50 pounds. AYR Wellness is an equal opportunity employer. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. We do not discriminate on the basis of race, color, religion, creed, national origin, ancestry, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, genetic information, marital status, military or veteran status, or any other protected status in accordance with applicable federal, state, and local laws.

For 75 years, Charles River employees have worked together to assist in the discovery, development and safe manufacture of new drug therapies. When you join our family, you will have a significant impact on the health and well-being of people across the globe. Whether your background is in life sciences, finance, IT, sales or another area, your skills will play an important role in the work we perform. In return, we'll help you build a career that you can feel passionate about. Job Summary We are seeking a Technician I for our Necropsy team at our Safety Assessment site located in Ashland, Ohio. Candidate will be working 4/10's either Monday-Thursday or Tuesday-Friday 8a-630pm, weekend rotation, holiday rotation and overtime are required for this role. A Technician I is in training to perform and become proficient in on-boarding skills, procedures, and cooperating in a team environment. The technician is learning basic skills required to conduct a study, which may include animal handling, euthanasia, and sedation; animal procedures including dissection; collection of samples and weights; laboratory preparation, set up and cleaning; preparation of laboratory solutions. The technician is working under close supervision to gain proficiency. Essential Duties and Responsibilities: (The fundamental Competencies/Skills & Responsibilities of the role (products and services provided/results accomplished) include, but are not limited to, those listed: Ensure good welfare and humane care for all animals worked with through gentle, positive human-animal interactions Train in on-boarding skills which may include animal handling, euthanasia, and sedation; animal procedures including dissection; collection of samples and weights; laboratory preparation, set up and cleaning; preparation of laboratory solutions. Specific skills will be based on each area's training plan and business needs. Prosect and perform functions in a time frame set by training group for core skill completion. Collect, document, review, and verify data on forms, or in electronic data capture systems. Review documentation of functions performed as part of quality control requirements. Use and maintain instrumentation and equipment. Learn and know anatomic terms Receive, track, and prepare samples or materials, as required for department. Perform all other related duties as assigned. The pay for this position is $19/hr. Please note that salaries vary within the range based on factors including, but not limited to, experience, skills, education, certifications, and location Qualifications (Knowledge, Experience, Skills and Abilities required to accomplish the essential functions) include but are not limited to: Education: High school diploma or General Education Degree (G.E.D.) preferred. Experience: No previous experience required. An equivalent combination of education and experience may be accepted as a satisfactory substitute for the specific education and experience listed above. Certification/Licensure: None, unless required by local government. Excellent written and verbal communication skills. Ability to manage multiple tasks and priorities to achieve goals. Computer skills (e.g., Microsoft Office Suite), commensurate with essential functions, including the ability to learn a validated system. Ability to ensure that a safe working environment is maintained by observing all safety procedures and working methods by making proper use of protective clothing and equipment, and by reading, understanding, and following all safety documents issued or notified of. Ability to ensure the integrity of the studies and fulfill the regulatory agencies requirements by performing the activities according to the Good Laboratory Practices (GLP), Standard Operating Procedures (SOP), Business Operating Procedures (BOP) and the Institutional Animal Care and Use Committee (IACUC) rules. Ability to work extended hours beyond normal work schedule to include, but not limited to evenings, weekends, extended shifts, and/or extra shifts, sometimes on short notice. Ability to work under specific time constraints. Must be authorized to work in United States without a sponsor visa now or in the future. Physical Demands Employees must be able to lift, move, manipulate, and/or hold heavy objects up to and including 50 pounds; this includes work materials, equipment, and/or animals. Must be able to perform laboratory procedures, which require, talking, hearing, standing, or sitting for long periods of time, entering data into a computer, using appropriate instruments, reaching with hands and arms, working in narrow spaces, and wearing safety equipment (PPE) according to OSHA regulations and company standards. Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus. Work Environment Works in a research laboratory environment, which requires use of sharp objects, working around mechanical parts, working with or near known or unknown toxic or caustic chemicals and/or biological hazards, exposure to fumes and airborne particles, working at noise levels ranging from quiet to moderately noisy. Comments May occasionally work weekend/holidays and/or rotating on-call schedule. About Safety Assessment Charles River is committed to helping our partners expedite their preclinical drug development with exceptional safety assessment services, state-of-the-art facilities and expert regulatory guidance. From individual specialty toxicology and IND enabling studies to tailored packages and total laboratory support, our deeply experienced team can design and execute programs that anticipate challenges and avoid roadblocks for a smooth, efficient journey to market. Each year approximately 300 investigational new drug (IND) programs are conducted in our Safety Assessment facilities. About Charles River Charles River is an early-stage contract research organization (CRO). We have built upon our foundation of laboratory animal medicine and science to develop a diverse portfolio of discovery and safety assessment services, both Good Laboratory Practice (GLP) and non-GLP, to support clients from target identification through preclinical development. Charles River also provides a suite of products and services to support our clients' clinical laboratory testing needs and manufacturing activities. Utilizing this broad portfolio of products and services enables our clients to create a more flexible drug development model, which reduces their costs, enhances their productivity and effectiveness to increase speed to market. With over 20,000 employees within 110 facilities in over 20 countries around the globe, we are strategically positioned to coordinate worldwide resources and apply multidisciplinary perspectives in resolving our client's unique challenges. Our client base includes global pharmaceutical companies, biotechnology companies, government agencies and hospitals and academic institutions around the world. At Charles River, we are passionate about our role in improving the quality of people's lives. Our mission, our excellent science and our strong sense of purpose guide us in all that we do, and we approach each day with the knowledge that our work helps to improve the health and well-being of many across the globe. We have proudly supported the development of 86% of the drugs approved by the FDA in 2021. Equal Employment Opportunity Charles River Laboratories is an Equal Opportunity Employer - all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. If you are interested in applying to Charles River Laboratories and need special assistance or an accommodation due to a disability to complete any forms or to otherwise participate in the resume submission process, please contact a member of our Human Resources team by sending an e-mail message to crrecruitment_**********. This contact is for accommodation requests for individuals with disabilities only and cannot be used to inquire about the status of applications. For more information, please visit ***************

Night Shift Tank Washer Technician $16 - $18 Per Hour! Night shift (Work from 5pm till 3:30am) Working 40 hours per week (WITH OPPORTUNITY FOR OVERTIME). Medical Dental and Vision Short and Long Term Disability Benefits Life Insurance Options Willingness to train for as long as it takes to learn the job on day shift. Must be 18 years old. No experience necessary! We will train you! Must be able to pass pre-employment screenings and background check Driver's license is required with clean MVR Apply online at hrewell.com or in person at H. R. Ewell, Inc. 4635 Division Highway East Earl, Pa. 17519. Job Type: Full-time Pay: $19 per hour Schedule: 10 hour shift Evening shift Night shift H. R. Ewell, Inc. one of the most trusted names in the Food Transportation Industry is seeking a Wash Bay Technician to be part of our team. Job Summary Job Duties include washing & sanitizing Food Grade tankers. Requires climbing to top of trailers , using fall protection to clean tankers, lifting up to 50 pounds and climbing with fall protection. Training is provided! Night shift ( Work from 5pm till 3:30am) Willingness to train for two weeks on day shift! Working 40 hours per week (WITH OPPORTUNITY FOR OVERTIME). Must be 18 years old. No experience necessary! We will train you!

Entry level position for STIHL Power Equipment sales and service. Ace Hardware will train in all aspects of STIHL Power Equipment sales and service. The Associate will also assist in the receiving, stocking, pricing of all merchandise and help maintain a clean and orderly merchandise presentation and overall store cleanliness. Essential Duties & Responsibilities Include the following. Other duties may be assigned. Customer Service: • Provide a positive representation of Ace Hardware. • Proactively assist customers in solving problems. • Possess a friendly outgoing demeanor; work well with customers as well as associates. • Ensure all pages and calls are answered promptly, courteously and effectively. • Forward any customer complaint that cannot be handled to a member of management. • Possess knowledge of store layout and location of products. Store Operations • Assist in creating a positive, professional and safe work environment. • Assist with receiving / stocking of merchandise throughout the store. • Assist with maintaining back stock levels. • Assist with providing a clean and orderly sales floor, including end caps and ad merchandise. • Ensure signage is current throughout the store. • Communicate any merchandising, cost control or sales idea to Store Manager. Education/Training High School or GED equivalent. Experience Mechanical ability is a plus. Will train on all aspects of STIHL equipment including sales and repair. Physical Demands Standing, walking, lifting (up to 50lbs). Work schedule Weekend availability Benefits Paid time off Employee discount Paid training