Airworthiness safety inspector job description
Updated March 14, 2024
6 min read
Find better candidates in less time
Post a job on Zippia and take the best from over 7 million monthly job seekers.
Example airworthiness safety inspector requirements on a job description
Airworthiness safety inspector requirements can be divided into technical requirements and required soft skills. The lists below show the most common requirements included in airworthiness safety inspector job postings.
Sample airworthiness safety inspector requirements
- Aeronautical Engineering Degree
- Training in Airworthiness Safety
- Airworthiness Certification
- Experience in Aviation Maintenance
- Knowledge of FAA Regulations
Sample required airworthiness safety inspector soft skills
- Problem Solving Ability
- Excellent Communication Skills
- Time Management
- Attention to Detail
- Ability to Work Under Pressure
Airworthiness safety inspector job description example 1
Aviation Technology Group airworthiness safety inspector job description
- Communicates with management as required to identify work assignments and delivery schedules.
- Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
- Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval.
- In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
- Performs other duties as required.
As an ideal candidate to join the AVTECH team, you will meet the following:
Education and Experience Requirements:
- High School graduate/GED.
- Airframe and Powerplant License required.
- Four (4) years aircraft experience on large/mid-size aircraft.
- Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
- Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.
Other Requirements:
- Strong written and verbal communication skills.
- Must be able to prioritize tasks.
- Strong computer skills.
- Must be able to work all shifts.
- Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
- Must be able to read, write, speak, and understand the English language.
Required Unique Skills:
- Structural/sheetmetal and/or Avionics install exerience is a plus.
- Must have a strong understanding of blueprints.
Shift: First
The estimated pay rate for this position is $36.05 per hour.
By submitting your resume, you are agreeing to have AVTECH submit an application on your behalf to the company we are hiring for. Must be a US citizen or permanent resident.
Post a job for free, promote it for a fee
Airworthiness safety inspector job description example 2
PDS Tech airworthiness safety inspector job description
**PDS is seeking a RS Airworthiness Inspector for an open position in Savannah, GA**
**Position Purpose:**
+ The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.
**Principal Duties and Responsibilities:**
+ Responsible for all Quality Control inspections on aircraft/components in the Repair Station.
+ Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
+ Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
+ Keeps accurate, neat and legible records of the work performed on aircraft/components.
+ Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
+ Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
+ Ensures aircraft/components are airworthy prior to any flight activities.
+ Mentors technicians on effective documentation.
**Additional Functions:**
+ Communicates with management as required. to identify work assignments and delivery schedules.
+ Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
+ Completes FAA required. conformity inspections and complies certification data for presentation to the FAA for approval.
+ In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
+ Perform other duties as assigned.
**Education and Experience Requirements:**
+ High School Diploma or GED required.
+ Airframe and Powerplant License required.
+ 4 years aircraft experience on large/mid-size aircraft.
+ Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
+ Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.
**Unique Skills:**
+ Structural/sheetmetal and/or Avionics install experience is a plus.
+ The candidate must be willing to work overtime periodically.
+ Must have a strong understanding of blueprints.
**Other Requirements:**
+ Strong written and verbal communication skills. Must be able to prioritize tasks.
+ Strong computer skills. .
+ Must be able to work all shifts.
+ Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
+ Must be able to read, write, speak, and understand the English language.
All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.
**Position Purpose:**
+ The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.
**Principal Duties and Responsibilities:**
+ Responsible for all Quality Control inspections on aircraft/components in the Repair Station.
+ Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
+ Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
+ Keeps accurate, neat and legible records of the work performed on aircraft/components.
+ Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
+ Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
+ Ensures aircraft/components are airworthy prior to any flight activities.
+ Mentors technicians on effective documentation.
**Additional Functions:**
+ Communicates with management as required. to identify work assignments and delivery schedules.
+ Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
+ Completes FAA required. conformity inspections and complies certification data for presentation to the FAA for approval.
+ In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
+ Perform other duties as assigned.
**Education and Experience Requirements:**
+ High School Diploma or GED required.
+ Airframe and Powerplant License required.
+ 4 years aircraft experience on large/mid-size aircraft.
+ Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
+ Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.
**Unique Skills:**
+ Structural/sheetmetal and/or Avionics install experience is a plus.
+ The candidate must be willing to work overtime periodically.
+ Must have a strong understanding of blueprints.
**Other Requirements:**
+ Strong written and verbal communication skills. Must be able to prioritize tasks.
+ Strong computer skills. .
+ Must be able to work all shifts.
+ Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
+ Must be able to read, write, speak, and understand the English language.
All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.
Dealing with hard-to-fill positions? Let us help.
Airworthiness safety inspector job description example 3
General Dynamics airworthiness safety inspector job description
Responsibilities for this Position
RS Airworthiness Inspector [Westfield, MA] (203004)
RS Airworthiness Inspector [Westfield, MA]in GAC Westfield
Unique Skills:
Per job description requirements.
Education and Experience Requirements
High School Diploma or GED required. Airframe and Powerplant License required. 4 years aircraft experience on large/mid-size aircraft. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.
Position Purpose:
The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.
Job Description
Principle Duties and Responsibilities:
Essential Functions: Responsible for all Quality Control inspections on aircraft/components in the Repair Station. .
Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. .
Keeps accurate, neat and legible records of the work performed on aircraft/components. .
Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. .
Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. .
Ensures aircraft/components are airworthy prior to any flight activities.
Mentors technicians on effective documentation.
Additional Functions: Communicates with management as required. to identify work assignments and delivery schedules. .
Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. .
Completes FAA required. conformity inspections and complies certification data for presentation to the FAA for approval. .
In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .
Perform other duties as assigned.
Other Requirements: Strong written and verbal communication skills. Must be able to prioritize tasks.
Strong computer skills. .
Must be able to work all shifts.
Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
Must be able to read, write, speak, and understand the English language.
Additional Information
Category: Quality Assurance
Percentage of Travel: Up to 25%
Shift: First
Employment Type: Full-time
Posting End Date: 11/30/2022
Equal Opportunity Employer/Veterans/Disabled.
Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.
Legal Information | Site Utilities | Contacts | Sitemap
Copyright 2020 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company .
Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
Nearest Major Market: Springfield MA
Job Segment: Quality Control Inspector, Inspector, QC, Compliance, Quality, Aviation, Legal
RS Airworthiness Inspector [Westfield, MA] (203004)
RS Airworthiness Inspector [Westfield, MA]in GAC Westfield
Unique Skills:
Per job description requirements.
Education and Experience Requirements
High School Diploma or GED required. Airframe and Powerplant License required. 4 years aircraft experience on large/mid-size aircraft. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.
Position Purpose:
The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.
Job Description
Principle Duties and Responsibilities:
Essential Functions: Responsible for all Quality Control inspections on aircraft/components in the Repair Station. .
Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. .
Keeps accurate, neat and legible records of the work performed on aircraft/components. .
Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. .
Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. .
Ensures aircraft/components are airworthy prior to any flight activities.
Mentors technicians on effective documentation.
Additional Functions: Communicates with management as required. to identify work assignments and delivery schedules. .
Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. .
Completes FAA required. conformity inspections and complies certification data for presentation to the FAA for approval. .
In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .
Perform other duties as assigned.
Other Requirements: Strong written and verbal communication skills. Must be able to prioritize tasks.
Strong computer skills. .
Must be able to work all shifts.
Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
Must be able to read, write, speak, and understand the English language.
Additional Information
Category: Quality Assurance
Percentage of Travel: Up to 25%
Shift: First
Employment Type: Full-time
Posting End Date: 11/30/2022
Equal Opportunity Employer/Veterans/Disabled.
Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.
Legal Information | Site Utilities | Contacts | Sitemap
Copyright 2020 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company .
Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
Nearest Major Market: Springfield MA
Job Segment: Quality Control Inspector, Inspector, QC, Compliance, Quality, Aviation, Legal
Start connecting with qualified job seekers
Resources for employers posting airworthiness safety inspector jobs
Average cost of hiring
Recruitment statistics
How to write a job description
Examples of work conditions
Airworthiness safety inspector job description FAQs
Ready to start hiring?
Updated March 14, 2024
Updated March 14, 2024