Quality Inspector jobs at Allegiance Staffing - 900 jobs

Job Title: QC Environmental Monitoring Technician Department: Quality Control The QC Environmental Monitoring Technician is responsible for supporting parenteral manufacturing operations through routine environmental monitoring of classified manufacturing areas, as well as conducting clean utility sampling and analysis within both manufacturing and QC laboratory facilities. This role plays a critical part in ensuring compliance with cGMP requirements and maintaining a controlled manufacturing environment to support the production of safe and effective pharmaceutical products. Key Responsibilities: Adhere to and promote compliance with all cGMP procedures, Quality Systems, and Good Documentation Practices (GDP). Perform routine environmental monitoring of classified manufacturing areas to support both standard operations and Environmental Monitoring Performance Qualification (EMPQ) activities. Conduct clean utility sampling and analysis, including but not limited to: Compressed air Potable water Purified water Water for Injection (WFI) Clean steam Support manufacturing and laboratory activities by providing timely and accurate environmental monitoring data. Enumerate, review, and document sampling results in LIMS or other laboratory data systems. Perform Second Person Verification (SPV) of environmental monitoring results on a routine basis. Participate in continuous improvement projects and quality initiatives. Assist with authoring and updating Standard Operating Procedures (SOPs) and Work Instructions as required. Adhere to and promote compliance with all site safety standards. Minimum Requirements: High School Diploma or equivalent required; Associate degree preferred. 2+ years of experience performing Environmental Monitoring in a GMP pharmaceutical manufacturing environment, preferably supporting aseptic or parenteral production. Demonstrated experience with environmental monitoring techniques, including: Viable surface monitoring Viable air monitoring Non-viable air monitoring Compressed air sampling Water and clean utility sampling and analysis Experience with laboratory systems such as LIMS, LES, and/or MODA. Preferred Qualifications: Strong understanding of cGMP requirements and regulatory compliance. Experience performing environmental monitoring within filling isolators or restricted access barrier systems (RABS). Ability to train and mentor junior Environmental Monitoring Technicians. Strong verbal and written communication skills. Ability to work effectively with cross-functional teams. Physical & Work Environment Requirements: Ability to work in laboratory and cleanroom environments while wearing appropriate PPE. Ability to gown into facility-dedicated cleanroom attire as required. Ability to stand or walk for extended periods and perform repetitive tasks. Ability to lift, push, pull, and carry up to 30 pounds. Work Schedule & Travel: Ability to work 12-hour shifts. Flexibility to work day or night shifts as required, especially during training and startup phases. Role may initially support project/startup activities and transition into a routine operational support role.

The primary focus of this role is to apply inspection standards, principles, and techniques to examine, evaluate, and report on the quality of various aircraft components, including engines and avionics, in accordance with Quality Management System (QMS) requirements. The Quality Inspector plays a crucial role in ensuring the integrity and safety of the aircraft and its components. **Responsibilities** + Perform inspections as scheduled, ensuring that the quality of workmanship meets industry standards and complies with Manufacturing (MFG) Work Instructions. + Conduct preliminary, in-progress, and final inspections on all processed articles. + Ensure that MFG records, work order reports, and forms are accurately completed before releasing components or vehicles for service. + Inspect for defects, damage, proper identification, and dimensions using measuring devices. + Document complex processes, input data, and inspection results accurately. + Utilize inspection methods, techniques, and equipment to determine quality or airworthiness in alignment with safety protocols. + Communicate effectively with engineering, management, and production personnel regarding product acceptance criteria and inspection results. + Generate Non-Conformance Reports (NCRs) and Non-Routine Items (NRIs) as required. + Perform receiving inspection duties for all incoming materials. + Oversee the proper tagging and identification of all parts and components to ensure rejected or non-repairable parts are correctly marked, quarantined, and rendered unusable. + Conduct work to enhance health and safety, product safety, and promote risk reduction. + Participate in safety-related event investigations and report workplace hazards promptly. + Contribute to the success of the Safety program at the local level. + Continuously practice safety behavior and Foreign Object Debris (FOD) awareness/prevention. + Conduct technical investigations to support quality processes and Root Cause Corrective Action activities. + Adhere to directions from team leaders to support collaboration across teams for project completion. + Work on moderately difficult quality control assignments, resolving issues or making recommendations as needed. + Ensure quality and efficiency of installations, including troubleshooting and providing guidance in troubleshooting processes and concepts. + Collaborate effectively to achieve goals and complete assigned tasks. **Essential Skills** + Minimum of five years' experience in aerospace parts and components, including manufacturing, maintenance, repair and overhaul (MRO), or airline environments with emphasis on prototype aircraft. + Knowledge of AS9100 and relevant aerospace industry standards and regulations. + Understanding of inspection techniques and quality issues in manufacturing, logistics, and warehouse operations. + Experience with nonconforming material control processes. + Proficiency in computer applications for following manufacturing work instructions. + Ability to read and interpret drawings, blueprints, and models. **Additional Skills & Qualifications** + Hands-on inspection experience in the aerospace industry using precision measurement tools. + Knowledge of quality control practices and willingness to learn new spacecraft quality techniques. + Ability to collaborate on quality inspection projects with technicians and interdepartmental functions. **Why Work Here?** Working in the space sector provides a unique opportunity to be at the forefront of innovation and technology. Employees benefit from comprehensive health and wellness programs, including medical, dental, vision, mental health support, and an Employee Assistance Program (EAP). **Work Environment** The role is based in an aircraft hangar with temperature control, though humidity levels may be higher due to the nature of the aircraft parts. The position offers a 4/10 schedule with options for day or night shifts from Monday to Thursday, and a potential for overtime. The contract is for six months with the potential to become permanent, based on performance, attitude, and attendance. **Job Type & Location** This is a Contract position based out of Tempe, AZ. **Pay and Benefits** The pay range for this position is $30.00 - $37.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Tempe,AZ. **Application Deadline** This position is anticipated to close on Feb 10, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

JOB TITLE: Quality Inspector PAY RATE: $31-39/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (4+ months with potential for extension) Shifts: Must be open to various shifts (4x10 Mon-Thurs 6:00am-4:30pm or 4:00pm-2:30am; 3rd shift Thurs-Sun) Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Perform in-process and final assembly inspections per QMS requirements. Accurately document inspection results and input data. Communicate acceptance criteria and results to engineering, management, and production teams. Generate Non-Conformance Reports (NCRs) in Oracle ERP. Ensure compliance with safety and quality standards. Requirements: High school diploma or GED required. A&P License required. 3-5 years of quality inspection experience in aerospace/manufacturing. Knowledge of AS9100 and FAA/aviation industry requirements. Strong background in aircraft mechanical and pneumatic systems, integration, and inspection techniques. Proficient with precision measurement tools, Microsoft Office, CATIA V5 (or similar), and interpreting 2D/3D drawings. Excellent attention to detail, technical writing, and communication skills. Ability to lift up to 35 lbs and meet required vision standards. Must be a U.S. Citizen (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today! #jobad

The primary focus of this role is to apply inspection standards, principles, and techniques to examine, evaluate, and report on the quality of various aircraft components, including engines and avionics, in accordance with Quality Management System (QMS) requirements. The Quality Inspector plays a crucial role in ensuring the integrity and safety of the aircraft and its components. **Responsibilities** + Perform inspections as scheduled, ensuring that the quality of workmanship meets industry standards and complies with Manufacturing (MFG) Work Instructions. + Conduct preliminary, in-progress, and final inspections on all processed articles. + Ensure that MFG records, work order reports, and forms are accurately completed before releasing components or vehicles for service. + Inspect for defects, damage, proper identification, and dimensions using measuring devices. + Document complex processes, input data, and inspection results accurately. + Utilize inspection methods, techniques, and equipment to determine quality or airworthiness in alignment with safety protocols. + Communicate effectively with engineering, management, and production personnel regarding product acceptance criteria and inspection results. + Generate Non-Conformance Reports (NCRs) and Non-Routine Items (NRIs) as required. + Perform receiving inspection duties for all incoming materials. + Oversee the proper tagging and identification of all parts and components to ensure rejected or non-repairable parts are correctly marked, quarantined, and rendered unusable. + Conduct work to enhance health and safety, product safety, and promote risk reduction. + Participate in safety-related event investigations and report workplace hazards promptly. + Contribute to the success of the Safety program at the local level. + Continuously practice safety behavior and Foreign Object Debris (FOD) awareness/prevention. + Conduct technical investigations to support quality processes and Root Cause Corrective Action activities. + Adhere to directions from team leaders to support collaboration across teams for project completion. + Work on moderately difficult quality control assignments, resolving issues or making recommendations as needed. + Ensure quality and efficiency of installations, including troubleshooting and providing guidance in troubleshooting processes and concepts. + Collaborate effectively to achieve goals and complete assigned tasks. **Essential Skills** + High School Diploma or equivalent. + Airframe & Powerplant (A&P) License. + Minimum of five years' experience in aerospace parts and components, including manufacturing, maintenance, repair and overhaul (MRO), or airline environments with emphasis on prototype aircraft. + Knowledge of AS9100 and relevant aerospace industry standards and regulations. + Understanding of inspection techniques and quality issues in manufacturing, logistics, and warehouse operations. + Experience with nonconforming material control processes. + Specific vision abilities including color perception, close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. + Ability to lift up to 50 pounds. + Proficiency in computer applications for following manufacturing work instructions. + Ability to read and interpret drawings, blueprints, and models. **Additional Skills & Qualifications** + Hands-on inspection experience in the aerospace industry using precision measurement tools. + Knowledge of quality control practices and willingness to learn new spacecraft quality techniques. + Ability to collaborate on quality inspection projects with technicians and interdepartmental functions. **Why Work Here?** Working in the space sector provides a unique opportunity to be at the forefront of innovation and technology. Employees benefit from comprehensive health and wellness programs, including medical, dental, vision, mental health support, and an Employee Assistance Program (EAP). Financial security is enhanced through competitive pay, bonuses, equity, and a 401k with a 100% match on the first 6%, as well as company-paid life and disability insurance. The company offers flexibility and time off with generous PTO, holidays, and parental leave. **Work Environment** The role is based in an aircraft hangar with temperature control, though humidity levels may be higher due to the nature of the aircraft parts. The position offers a 4/10 schedule with options for day or night shifts from Monday to Thursday, and a potential for overtime. The contract is for six months with the potential to become permanent, based on performance, attitude, and attendance. **Job Type & Location** This is a Contract position based out of Mesa, AZ. **Pay and Benefits** The pay range for this position is $30.00 - $37.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Mesa,AZ. **Application Deadline** This position is anticipated to close on Feb 5, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

JOB TITLE: Aircraft Quality Inspector PAY RATE: $43/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Visually inspect in-process and finished products including electronic units, electromechanical assemblies, and mechanical structures. Use measurement tools (micrometers, scales, dial indicators, fixtures) to verify dimensional and quality requirements. Accept or reject parts based on specifications, drawings, and inspection criteria. Perform First Article Inspections (FAI) and document non-conforming materials or assemblies. Review blueprints, drawings, CATIA models, customer specs, and inspection checklists. Conduct line clearances to ensure previous lot materials are removed. Maintain accurate quality records and documentation. Inspect vendor, subcontractor, and internal parts and assemblies. Support production flow by cross-training and assisting assembly technicians as needed. Perform additional duties as assigned; training and certification provided as required. Requirements: High School Diploma or GED Proficiency with measurement tools and inspection equipment Blueprint and drawing review experience First Article Inspection (FAI) experience Ability to follow inspection procedures and quality control requirements Must be a U.S. Citizen (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today! #jobad

AtWork is seeking skilled Quality Inspector with SHEET METAL experience to join a reputable company in the Greenville area, known for its clean, organized, and positive work environment. Shift: 7: 00AM-5: 30PM Monday-Thursday 7: 00AM-12: 00PM Friday Pay Rate $22.00-$24.00 DOE Key Responsibility: *Inspecting and measuring sheet metal parts and products to verify conformity to specifications and quality standards. *Identifying and reporting any defects or non-compliances in materials, fabrication process, or finished products. *Using precision measuring tools like calipers, micrometers, and gauges to conduct inspections. Qualifications: *2 years of experience working in the metal industry. *2 years experience inspecting sheet metal *Proficiency in quality inspector *High School Diploma or GED preferred AtWork Personnel, a nationally recognized staffing leader, is excited to open our new office in Greenville, SC. We are dedicated to supporting our clients and candidates, building long-lasting relationships, and creating a positive work environment where your career can flourish. Apply today!

Your eye for detail could shape the future of aerospace and medical technology. Join Oberg Industries as a Quality Inspector and help deliver parts that make a difference worldwide. As a Quality Inspector you will inspect and approve parts from both internal manufacturing and external suppliers, ensuring they meet strict quality standards. In the Quality Inspector role, you will work under moderate supervision, you'll play a key part in maintaining product integrity for industries such as aerospace, medical, and precision manufacturing. The Quality Inspector position will work at our Oberg Sarver, PA location and we have both daylight shifts and night shifts available. What Oberg Industries Offers: Competitive pay (above industry average) Medical, dental, and vision insurance (100% premium coverage) Health Savings Account (HSA) Opt-out reimbursement for medical coverage 401(k) with up to 4% company match Annual Profit-Sharing contributions Paid time off and holiday pay Overtime pay (after 8 hrs./day worked) Annual increases Quarterly bonuses Flexible start times Air conditioned, temperature-controlled environment Clean, bright, and modern facilities High focus on family, work-life balance Opportunities for career development and growth Collaborative and safety-focused work environment What You Will Do as a Quality Inspector: Perform part inspections using calipers, micrometers, microscopes, indicators, comparators, and precision gages. Operate touch probe/vision coordinate measuring machines (CMM) for verification (no programming required). Compare parts against specified dimensions, tolerances, and finish requirements. Inspect for size, surface finish, overall appearance, and other critical features. Evaluate inspection results, determine part acceptability, and seek approval for deviations. Troubleshoot equipment or system issues using test equipment and prior experience. Package parts securely for shipment. Comply with all company quality system standards, safety, and security procedures. Maintain a clean, orderly, and safe work environment. Perform other related duties as assigned. What You Will Bring to our Team: Pass eye exam (with or without correction) required for aerospace final inspection role. Ability to read blueprints. Basic math and measurement skills. Strong written, verbal, or other forms of communication skills. Must be a U.S. citizen or be able to comply with U.S. export regulations. Ability to wear personal protection equipment, such as earplugs, safety glasses, and safety shoes. Ability to travel domestically and internationally. Preferred Education/Qualifications: High School diploma or equivalent preferred. Previous hands-on experience in medical device, contract manufacturing, apprenticeship programs, or quality roles required. At least 1 year in a quality position or 2 years in manufacturing required. Familiarity with ISO, TS, or related quality management systems strongly preferred. At Oberg Industries, we believe in fostering a collaborative on-site work environment. Accordingly, employees are expected to be on-site in order to perform their job. About Oberg Industries: Oberg Industries LLC is a local, family-owned, contract manufacturer and supply chain integrator providing tooling/metal stamping and precision machining services to many well-known companies around the world. Our passion is for precision manufacturing, and our breadth of expertise enables us to provide cost-effective manufacturing solutions for the most demanding and complex production challenges for our customers. Our highly trained workforce plays a pivotal role in our ability to produce high quality parts. At Oberg Industries, you will join a team of amazing people who treat each other like family, while working with products that are improving and saving people's lives each and every day. Learn more about our award-winning organization by visiting ************** At Oberg Industries, LLC we are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, genetics, pregnancy, disability, age, veteran status, or other protected characteristics. No question on this application form is intended to solicit information about an applicant's protected characteristics, if any. In addition, the Americans with Disabilities Act requires employers to provide reasonable accommodations for known physical or mental disabilities of applicants.

Job DescriptionYour eye for detail could shape the future of aerospace and medical technology. Join Oberg Industries as a Quality Inspector and help deliver parts that make a difference worldwide. As a Quality Inspector you will inspect and approve parts from both internal manufacturing and external suppliers, ensuring they meet strict quality standards. In the Quality Inspector role, you will work under moderate supervision, you'll play a key part in maintaining product integrity for industries such as aerospace, medical, and precision manufacturing. The Quality Inspector position will work at our Oberg Sarver, PA location and we have both daylight shifts and night shifts available. What Oberg Industries Offers: Competitive pay (above industry average) Medical, dental, and vision insurance (100% premium coverage) Health Savings Account (HSA) Opt-out reimbursement for medical coverage 401(k) with up to 4% company match Annual Profit-Sharing contributions Paid time off and holiday pay Overtime pay (after 8 hrs./day worked) Annual increases Quarterly bonuses Flexible start times Air conditioned, temperature-controlled environment Clean, bright, and modern facilities High focus on family, work-life balance Opportunities for career development and growth Collaborative and safety-focused work environment What You Will Do as a Quality Inspector: Perform part inspections using calipers, micrometers, microscopes, indicators, comparators, and precision gages. Operate touch probe/vision coordinate measuring machines (CMM) for verification (no programming required). Compare parts against specified dimensions, tolerances, and finish requirements. Inspect for size, surface finish, overall appearance, and other critical features. Evaluate inspection results, determine part acceptability, and seek approval for deviations. Troubleshoot equipment or system issues using test equipment and prior experience. Package parts securely for shipment. Comply with all company quality system standards, safety, and security procedures. Maintain a clean, orderly, and safe work environment. Perform other related duties as assigned. What You Will Bring to our Team: Pass eye exam (with or without correction) required for aerospace final inspection role. Ability to read blueprints. Basic math and measurement skills. Strong written, verbal, or other forms of communication skills. Must be a U.S. citizen or be able to comply with U.S. export regulations. Ability to wear personal protection equipment, such as earplugs, safety glasses, and safety shoes. Ability to travel domestically and internationally. Preferred Education/Qualifications: High School diploma or equivalent preferred. Previous hands-on experience in medical device, contract manufacturing, apprenticeship programs, or quality roles required. At least 1 year in a quality position or 2 years in manufacturing required. Familiarity with ISO, TS, or related quality management systems strongly preferred. At Oberg Industries, we believe in fostering a collaborative on-site work environment. Accordingly, employees are expected to be on-site in order to perform their job. About Oberg Industries: Oberg Industries LLC is a local, family-owned, contract manufacturer and supply chain integrator providing tooling/metal stamping and precision machining services to many well-known companies around the world. Our passion is for precision manufacturing, and our breadth of expertise enables us to provide cost-effective manufacturing solutions for the most demanding and complex production challenges for our customers. Our highly trained workforce plays a pivotal role in our ability to produce high quality parts. At Oberg Industries, you will join a team of amazing people who treat each other like family, while working with products that are improving and saving people's lives each and every day. Learn more about our award-winning organization by visiting ************** At Oberg Industries, LLC we are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, genetics, pregnancy, disability, age, veteran status, or other protected characteristics. No question on this application form is intended to solicit information about an applicant's protected characteristics, if any. In addition, the Americans with Disabilities Act requires employers to provide reasonable accommodations for known physical or mental disabilities of applicants. Powered by JazzHR pUFkei4CTh

Job DescriptionDo you have an eye for detail and experience in a Quality Lab setting?***PeopleShare is HIRING IMMEDIATELY for a 2nd Shift Precision Quality Inspector in Lancaster, PA!***Apply today or call Misty at ************Why PeopleShare? We offer full medical benefits from day 1 Chance to work with the top companies in the area Immediate ability to work with 15+ different companies by applying once More local offices than any other agency: we do the networking for you Weekly pay through direct deposit Paid skills training available Earn referral bonuses We offer coaching to help you ace your interview Job Details for 2nd Shift Precision Quality Inspector: Schedule: 2nd Shift: Monday-Thursday 3pm-1:30am *must be willing to train on 1st Shift for 6-8 weeks* Pay Rate: $18-$21+ based on experience Strong Benefits: Medical Dental Vision Retirement PTO Weekly Pay via Direct Deposit! Job Responsibilities & Description for 2nd Shift Precision Quality Inspector: Follow process-driven Inspection steps and documentation Read and apply blueprints and diagrams Use caliper, micrometer, and other tools to verify math-based tolerances Apply strong understanding of math: fractions and decimals Occasionally perform simple Machine Operation Be flexible to perform all duties from a standing or seated position Occasionally lift and carry up to 50lbs Job Requirements for 2nd Shift Precision Quality Inspector: REQUIRED: Must be willing to work 2nd shift hours REQUIRED: Must speak, read, and understand English for safety reasons REQUIRED: Must have reliable transportation - this position is not bus accessible REQUIRED: Must have 1+ year of experience in Precision Quality Inspection using Micrometers, Calipers, Gauges, or similar fine measuring tools REQUIRED: 1+ year of experience working with manufacturing blueprints Preferred: Experience in CNC-machining environment preferred but not required Preferred: Experience in a quality lab or medical manufacturing setting Excellent work history - Must have been consistently employed for the past 2+ years Must have good understanding of math: fractions, decimals + addition, multiplication etc. If you feel you have MOST of the above qualifications, please apply! We want to speak with you!PeopleShare is the leading Staffing Agency in the region and has temporary to hire and permanent jobs in the central Pennsylvania (PA) area - Harrisburg, Camp Hill, Lemoyne, York, Lancaster, Carlisle, Chambersburg, Middletown, Leola, Shippensburg, Ephrata and Mechanicsburg, as well as northern Maryland (MD) - Hagerstown, Maugansville, Williamsport, Boonsboro, Smithsburg, and Hancock. We have openings for receptionist, data entry, customer service, collections, office managers, call center, administrative assistant, accounts payable clerk, accounts receivable clerk, file clerk, warehouse, assembly, production, Machine operator assistants, warehouse material handlers, material handling associates, material handler specialists, material handling experts, machinists, machine specialists, machine operator associates, machine operator assistants, press operators, press assistants, press operator specialists, quality inspection associates, quality inspection specialists, QA, QC, quality assurance, quality control, quality control inspection, quality assurance inspection, machine troubleshooters, machine setup specialists, warehouse pickers, warehouse packers, warehouse forklift, machine operators, and maintenance mechanics. PeopleShare provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, PeopleShare complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.IND15

Job DescriptionPeopleShare is NOW HIRING 2nd Shift and 3rd Shift Quality Inspector Packers $19 - $23 + per hour near Lebanon, PAAPPLY NOW or text/call Misty at **************Inspector Packer not your jam? We also have openings for Machine Operation, Forklift, General Labor - various shifts and pay rates all around Lancaster, PA. If you have experience in any of these areas, please apply! We want to speak with you**Why PeopleShare? Immediate ability to work with 15+ different companies with one interview More local offices than any other agency, we do the networking for you! Weekly pay through direct deposit Skills training available Earn referral bonuses We offer coaching to help you ace your interview Job Details for NOW HIRING 2nd Shift and 3rd Shift Quality Inspector Packers: Pay rate: $19 - $20.50 + per hour eligible for near term raise to $23-$26 after probationary period Hours: *All shifts must train on 1st 6am-2:30pm for 2-4 weeks* 2nd Shift 2pm-10:30pm 3rd Shift 10pm-6:30am 1st Shift and other shifts occasionally available Weekly pay via direct deposit Competitive Benefits: Dental insurance Health insurance Paid time off Vision insurance Job Responsibilities & Description for NOW HIRING 2nd Shift and 3rd Shift Quality Inspector Packers: Offload machinery Manually and visually inspect product Conduct measurement inspections such as size dimensions and weight Package, label, and palletize completed product Complete associated paperwork Assist in setup and operation of production machinery May also assist in the warehouse: Receiving, inventory, picking, material handing, using RF scanner, and shipping Job Requirements for NOW HIRING 2nd Shift and 3rd Shift Quality Inspector Packers: RELIABLE TRANSPORTATION REQUIRED - This position is not ideal for bus-route For Safety Reasons: Must be able to speak, read, write, and understand English 1+ year of previous warehouse or production experience strongly preferred Consistent employment record Ability to stand, walk, bend, and lift items up to 50 lbs. for extended periods. Dependable, punctual, and able to work flexible hours, including weekends if needed. This job is a great fit if you have worked at Sherwin Williams, GSK, Bayer, Amazon, Chewy, Nordstrom, or Urban Outfitters, PeopleShare is the leading Staffing Agency in the region and has temporary to hire and permanent jobs in the central Pennsylvania (PA) area - Harrisburg, Camp Hill, Lemoyne, York, Lancaster, Carlisle, Chambersburg, Middletown, Leola, Shippensburg, Ephrata and Mechanicsburg, as well as northern Maryland (MD) - Hagerstown, Maugansville, Williamsport, Boonsboro, Smithsburg, and Hancock. We have openings for warehouse, assembly, production, Nordstrom, amazon, order selectors, pickers, packers, warehouse associate, warehouse pick, order pick, warehouse pick pack, factory pick pack, factory warehouse, production picking packing, packaging associate, pick packer, loader helper, driver helper, forklift, machine operators, shipping, receiving, shipping and receiving, manufacturing, material handler, machine operator, high reach, reach truck, general laborer and maintenance mechanics, warehouse, assembly, production, Nordstrom, amazon, order selectors, pickers, packers, packaging associate, pick packer, loader helper, driver helper, forklift, machine operators, shipping, receiving, shipping and receiving, manufacturing, material handler, machine operator, high reach, reach truck, general laborer and maintenance mechanics, cherry picker, freezer cooler picker, order selector, forklift operation, material handler, machine operator, high reach, reach truck, general laborer and maintenance mechanics, cherry picker, freezer cooler picker, order selector, forklift operation.PeopleShare provides equal opportunities to all employees and applicants for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, genetic disposition, neurodiversity, disability, veteran status, or any other protected category or class under federal, state, and/or local laws. This policy applies to all locations and all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.IND15

Now Hiring: Quality Inspector Pay: $21-$24/hr (based on experience) Schedule: Monday-Friday, 6:00 AM - 2:30 PM (OT as needed) Join a growing manufacturing team! We're seeking a detail-oriented professional with experience in inspection, welding, or manufacturing to help ensure top-quality products every time. Responsibilities: Inspect welds and finished parts Read and interpret blueprints Use precision measuring tools Why Join Us: Great hours and steady work Opportunity to grow with a manufacturing team Apply Today: Email your resume: ********************* Call or text: ************ for more info

Now Hiring: Quality Inspector Pay: $20-$22/hr (based on experience) Schedule: Monday-Friday, 6:00 AM - 2:30 PM (OT as needed) Join a growing manufacturing team! We're looking for someone detail-oriented with experience in inspection, welding, or manufacturing who's ready to ensure top quality on every product. Inspect welds & parts Read blueprints & use measuring tools Great hours + steady work Apply today! Email your resume to ********************* Call or text ************ for more info!

Job DescriptionWe're hiring a Quality Inspector for our SW Houston client! We are looking for experienced, reliable, hard-working employees who can interview immediately! DESCRIPTION OF YOUR DREAM JOB: Job Title: Quality Inspector Location: SW Houston Pay: $15 to $20/hr. Hours: Monday to Friday 9:00am to 5:30pm Duration: Temp to Hire Description of Duties: Perform visual inspections and recording quality issues. Requirements: Must have basic computer skills, ability to use microscopes, and be able to work with small tools. WHO WE ARE:Carlton Staffing is a local staffing firm in Texas with over 44 years of experience! We have connections with numerous hiring managers throughout the greater Houston area. An application with us is an open application with our rock-star clients. Don't wait another minute! Let our knowledgeable staff assist you today, visit www.carltonstaffing.com.

TekWissen provides a unique portfolio of innovative capabilities that seamlessly combines clients insights, strategy, design, software engineering and systems integration. Our tightly integrated offerings are tailored to each clients requirements and span the services spectrum from Application Development/Maintenance, testing, IT Consulting & staffing for IT Infrastructure Management through strategic consulting and industry oriented Business Process. Our end-to-end Business Process as a Service (BPaaS) solutions support complex, high-value, knowledge based work. Combining applications, platforms, infrastructure, knowledge processes, and domain expertise allows us to deliver greater efficiencies and innovative business capabilities. Job Description Description: Verifies basic product conformance to company operating procedures, quality standards, applicable government regulations and purchase order requirements. Assure compliance to internal and external specifications and standards. Provides objective evidence of receiving discrepancy resolution. Identifies and documents discrepancies using non-conformance system. Segregates, controls and dispositions non-conforming items. Assists in product reviews with internal customer during product or process verification. Has direct contact with external suppliers, freight carriers and internal departments including but not limited to: IS, Traffic, CDC Warehouse, Supply Chain, Sales). Verifies repetitive or significant non-conformances. Resolves discrepancies with suppliers, carriers and internal Aviall departments. Verifies repetitive or significant non-conformances. Consistently initiates action to correct quality problems or notifies others of quality issues as appropriate. · Identifies and documents discrepancies, records results and conformance to acceptance plans. Captures accurate supplier performance data for supplier scorecards. Issues ZI QNs for internal process failures. Consistently and proactively reviews specialized processes to identify gaps between requirements and current outputs within own work group, throughout the organization, and with external suppliers. Identifies potential conditions that contribute to gaps or key variances. Completes special projects and other duties assigned Qualifications Requirements: Education Requirement: High School Diploma or GED. Required: 2 to 4 years related experience. Physical requirements: Warehouse environment. ability to drive forklift Some light lifting not exceeding 35lbs may occur. Forklift certified MS Office, SAP Completes special projects and other duties assigned. Additional Information If you are interested to know more about this exiting opportunity, please feel free to reach me at ************

Inspector Brain-related illness is one of the last great frontiers in medicine, not because the brain is unknowable, but because it has been inaccessible. Paradromics is building a brain-computer interface (BCI) platform that records brain activity at the highest possible resolution: the individual neuron. AI algorithms then decode this massive amount of brain-data, enabling the seamless translation of thought into treatments. Our first clinical application, the Connexus BCI, will help people who are unable to speak, due to ALS, spinal cord injuries and stroke, to communicate independently through digital devices. However, the capabilities of our BCI platform go far beyond our first application. With the brain in direct communication with digital devices, we can leverage technology to transform how we treat conditions ranging from sensory and motor deficits to untreatable mental illness. The Role As an Inspector on the Quality team, you will play a critical role in ensuring the accuracy, consistency, and compliance of manufactured medical devices. Over the next 6-12 months, you will independently perform established inspections, collect and document inspection data, and review manufacturing and procedural records to ensure product quality and regulatory compliance. Responsibilities Perform established inspections on manufactured medical devices in accordance with approved procedures. Collect, document, and report accurate inspection data, including custom inspection requests. Review manufacturing records, inspection records, and procedures for accuracy and compliance. Identify, document, and escalate potential quality issues as appropriate. Use designated inventory and inspection software systems to support inspection activities. Maintain a high level of accuracy and attention to detail while performing repetitive inspection tasks. Required Education High School Diploma or equivalent Required Qualifications Excellent attention to detail and ability to perform high-accuracy, repetitive tasks. 2+ years of inspection experience in a regulated industry (e.g., medical devices, aerospace, semiconductor). High level of comfort using computer software systems, including inspection or manufacturing systems. Ability to follow established procedures and work independently once trained. Preferred Qualifications Experience working in a medical device startup environment. Experience in a manufacturing setting. Experience using inspection equipment such as calipers or automated measurement systems. Experience inspecting electrical systems or components. Paradromics is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin.

Job Description Inspector About Paradromics Brain-related illness is one of the last great frontiers in medicine, not because the brain is unknowable, but because it has been inaccessible. Paradromics is building a brain-computer interface (BCI) platform that records brain activity at the highest possible resolution: the individual neuron. AI algorithms then decode this massive amount of brain-data, enabling the seamless translation of thought into treatments. Our first clinical application, the Connexus BCI, will help people who are unable to speak, due to ALS, spinal cord injuries and stroke, to communicate independently through digital devices. However, the capabilities of our BCI platform go far beyond our first application. With the brain in direct communication with digital devices, we can leverage technology to transform how we treat conditions ranging from sensory and motor deficits to untreatable mental illness. The Role As an Inspector on the Quality team, you will play a critical role in ensuring the accuracy, consistency, and compliance of manufactured medical devices. Over the next 6-12 months, you will independently perform established inspections, collect and document inspection data, and review manufacturing and procedural records to ensure product quality and regulatory compliance. Responsibilities Perform established inspections on manufactured medical devices in accordance with approved procedures. Collect, document, and report accurate inspection data, including custom inspection requests. Review manufacturing records, inspection records, and procedures for accuracy and compliance. Identify, document, and escalate potential quality issues as appropriate. Use designated inventory and inspection software systems to support inspection activities. Maintain a high level of accuracy and attention to detail while performing repetitive inspection tasks. Required Education High School Diploma or equivalent Required Qualifications Excellent attention to detail and ability to perform high-accuracy, repetitive tasks. 2+ years of inspection experience in a regulated industry (e.g., medical devices, aerospace, semiconductor). High level of comfort using computer software systems, including inspection or manufacturing systems. Ability to follow established procedures and work independently once trained. Preferred Qualifications Experience working in a medical device startup environment. Experience in a manufacturing setting. Experience using inspection equipment such as calipers or automated measurement systems. Experience inspecting electrical systems or components. Paradromics is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin. Powered by JazzHR EngzBhh3cs

Our Quality Assurance Inspectors are responsible for performing inspections, audits of purchased parts, units, materials, equipment, panel/module level assemblies and quality control programs to specifications. Interprets manufacturing drawings, diagrams, specifications and lists to approve or reject units. Maintains support documentation and reviews performance data. Ensures in-process and finished products meet company and customer requirements. Determines or assists in determining methods and procedures necessary for inspection. Validates products and documentation for compliance to all applicable requirements and prepares items for presentation to the customer for acceptance and delivery. Inspectors also perform First Article Inspections and Finished Goods Testing. The inspector must possess good communication abilities, be flexible and able to lift up to 30 lbs. Essential Duties and Responsibilities * Responsible for the incoming material inspections of products and raw materials including metals and sub tier vendor products. * Inspects various metal products at various stages of the manufacturing process, and tests products for a variety of qualities * Interfaces with Manufacturing, Quality and Process Engineering Staff as needed on the interpretation of Customer and Internal Engineering drawings, specifications, and standards. * Able to use simple hand tools and basic measurement equipment such as digital calipers, micrometers. Depth gauges etc. * Act as an internal auditor responsible in the implementation and conformance to Quality standards of AS9100 and IATF as well as ISO 14001 and OSHA safety requirements. * Will assist manufacturing if required to produce products that meet or exceed customer expectations. * Control of non-conforming product and maintenance of accurate records. * May perform other duties as assigned, including work in other functional areas to cover absences or relief, to equalize peak work periods or otherwise to balance the workload. Preferred Skills and Experience To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * High School Diploma or equivalent with * 3+ years hands on experience using gages such as microscopes, calipers, height gages, scales, and other equipment preferred * Experience in metal working, welding, forming, cutting, finishing preferred. * Good written and oral communication skills with the ability to interface across the organization to achieve effective results * * Experience working in a team environment to solve problems and balance workloads * Ability to solve practical problems and deal with a variety of variables in situations where only a limited amount of information and/or standardization exists. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle or feel objects, tools or controls; reach with hands and arms; climb or balance; stoop; knell, crouch, or crawl; talk or hear; taste or smell. * The employee must regularly lift and/or move up to 30 pounds. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment Hours Monday through Friday 9-5 The work environment characteristics described here are representative of those an employee encounters while performing the essential job functions of this job. Reasonable accommodations will be made available to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee will occasionally work near moving mechanical parts, high-pressure and in outside weather conditions and is occasionally exposed to fumes or airborne particles, risk of electrical shock and risk of radiation. * Employee will occasionally deal with chemical solutions for conducting penetrant testing on products. * Safety glasses will be required while in the production areas, and safety shoes will be required when performing work in a production cell. Work Authorization * US Citizenship required for ITAR registration

: HireQuest Direct in Griffith is hiring for Quality Inspectors in Hammond, IN and Chicago, IL! It is a full-time and temp-to-hire position. Pay is $10/hr. **Pays Weekly!!** Shifts: 6 am - 6 pm and 6 pm - 6 am Weekend shifts. Friday & Saturday - Days Sun & Monday - Nights Requirements: Must have a reliable transportation Ability to stand for 12 hours **APPLY NOW** Please either call us or visit us!! · Office Number: ************** · Office Location: 1935 W. Glen Park Ave., Griffith, IN 46319 Sincerely, Your HireQuest Direct Griffith Team ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ HireQuest Direct (formerly Command Center, Inc.) is a nationally recognized temporary staffing agency that provides services in areas such as general labor, industrial, skilled trade, hospitality, and construction. We take the time to get to know each applicant to ensure the best match when placing in all positions. We serve many clients so we have various opportunities available each day. Call us to experience staffing done differently! Note: This job description is not intended to represent a complete, comprehensive list of all duties, responsibilities, and requirements that may be needed for this position. Unplanned activities and additional responsibilities and requirements may be assigned.

Start your new career as a Mechanical Quality Technician with MAU at Atlas Carts in Williston, SC. As a Mechanical Quality Technician, you will perform inspections, rework, and quality checks to ensure every golf cart meets the highest standards. What We Offer: * Pay of $18 * Great shift | Monday-Thursday | 6:00 AM - 4:30 PM * PPE Provided * Referral Program * No Weekend Work What We're Looking For: * High school diploma or equivalent * 1+ years of manufacturing experience * Proficiency using power tools and hand tools * Ability to read specifications and match-mark bolts * Comfortable lifting 50+ lbs. * Must be able to differentiate colors What You'll Do as a Mechanical Quality Technician: * Perform visual and functional inspections of components, assemblies, and completed golf carts * Record and document inspection results, defects, and non-conformities * Troubleshoot defective parts and conduct rework or repairs * Use torque wrenches and match-mark bolts on cart undercarriages * Ensure all carts meet final inspection standards before shipment * Assist in developing and improving quality processes in a fast-growing company