Allied Motion Technologies jobs in Buffalo, NY - 33235 jobs

Allient Inc. is in growth mode and currently seeking a Staff Systems Engineer to join our team at our corporate innovation center and headquarters located in Buffalo, New York! The Systems Staff Engineer leads system-level engineering for customer applications, working closely with leadership, sales, engineering teams, suppliers, and customers. This role supports major multi-site projects built around Allient's core technologies: Motion, Control, Power, and Lightweighting. Apply now! Responsibilities: * Lead complex system design & analysis across electrical, mechanical, software, actuation, and composite technologies. * Define system architecture from customer requirements and applicable standards. * Manage requirements, including subsystem definitions, derived requirements, tolerances, and traceability. * Use modeling and simulation to verify performance, reliability, safety, and risk mitigation. * Create and manage test plans, procedures, fixtures, and tooling globally. * Perform subsystem testing and support integration into customer vehicles or applications. * Evaluate new and modified product designs to ensure performance meets specifications. * Present technical information to support strategic, multi-site planning. * Review and critique design work from others and promote best practices. * Collaborate directly with customers and internal teams on requirements, project updates, and test results. * Contribute to standard process and procedure development. * Mentor engineers at various levels. * Serve as a technology expert and help guide innovation for products and processes. * Support proposals, including technical definitions, diagrams, and compliance documentation. * Operate with a high degree of independence; only major deliverables require senior review. * Work across multiple projects and locations simultaneously. * Some limited travel may be required (20% typical) * Other duties as needed. Minimum Qualifications: * Bachelor's degree in electrical, mechanical, or aerospace engineering + 11 years' experience, or Master's degree + 9 years' experience. * Experience with actuation systems (motors, gearing, ball screws, electronics, software). * Knowledge of composites/lightweighting preferred. * Experience with military/defense programs or government contracting preferred. * Strong ability to interpret and develop technical instructions, diagrams, and abstract concepts. * Proven technical expertise in one or more engineering disciplines. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit *************** Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Invest in Your Success with Mac Tools Are you ready to be your own boss and build a thriving business? Mac Tools offers a unique opportunity to own and operate a successful franchise. With a strong credit profile and the right financial foundation, you can unlock the potential to achieve financial independence and a fulfilling lifestyle. As a Mac Tools franchisee, you will enjoy the freedom and flexibility of running your own business without the overwhelming burdens of startup. Mac Tools offers a family-oriented culture; supported by Stanley Black and Decker - the largest tool company in the world - giving you the best of both worlds. Key Benefits of Mac Tools Franchise Ownership Exclusive Territory: Build a loyal customer base in your protected territory. Mac Tools currently has over 1,250 existing franchisees with opportunities available in all fifty states, including Puerto Rico and across Canada. Proven Business Model: Benefit from an award-winning system that has earned accolades including Fastest Growing Franchise, Top 100 Franchise, Franchise 500, and more. World-Class Training: Gain the skills and knowledge you need to succeed via classroom and field-based sales training at our headquarters. Ongoing Support: Receive continuous guidance and assistance, including national marketing support with motorsports branding, sales flyers, videos, etc. Strong Brand Recognition: Leverage the brand power of Mac Tools and Stanley Black and Decker - the largest and fastest growing tool company in the world. Financial Flexibility: Explore various financing options to fit your needs. Financial Requirements To qualify for a Mac Tools franchise, a strong credit profile and an initial down payment are essential. Your financial strength is a key factor in our franchise approval process, and we have lower start-up costs than many other franchise opportunities with a variety of financing options. Our Veterans Program offers vets or their spouse credits of up to $25,000 towards inventory purchases. Ready to Take the Next Step? Are you a qualified entrepreneur ready to invest in and operate a Mac Tools franchise? Complete our quick mobile application to start your journey towards financial independence. Our team can get you scheduled for one of our free Discovery Days, providing the opportunity to meet current Franchisees and experience the business first-hand. Mac Tools , a division of Stanley Black & Decker Inc. 5195 Blazer Parkway Dublin, Ohio 43017

Great customer support requires human agents and AI in perfect balance, and Assembled is the only unified platform that orchestrates both at scale. Companies like Canva, Etsy, and Robinhood use Assembled to coordinate their entire support operation - in-house agents, BPOs, and AI - in a single operating system. With AI Agents that resolve cases end-to-end, AI Copilot for agent assistance, and AI-powered workforce management that optimizes both human and AI capacity, Assembled helps teams deliver faster, better service while making smarter decisions about how to staff and automate. Backed by $70M from NEA, Emergence Capital, and Stripe, we're building the platform that makes AI and human collaboration actually work. The Role We're looking for an Account Executive to help us win new customers. As an early member of the sales team, you'll be on the ground floor of building our sales team. We're looking for someone who is confident in generating their own pipeline and closing customers. You'll use your learnings from talking to customers to help us develop our go-to-market playbook and improve our operational processes as we scale. Responsibilities * Identify high-potential businesses and verticals and develop and execute outbound strategies to bring them to Assembled * Demonstrate an ability to multithread and access C-level executives * Clearly articulate and demonstrate our value proposition, creating excitement and enthusiasm among prospects. * Run effective sales processes from start to finish - including demos, negotiation, security and procurement * Be a trusted advisor to prospective customers * Work cross-functionally with Customer Success, Marketing and Engineering to ensure customers are onboarded and set up for success * Use your learnings to build and iterate on our sales philosophy, playbook and processes About You * Minimum of 5 years of closing experience selling a SaaS product * Experience closing complex deals with multiple c-suite stakeholders * High attention to detail with strong verbal and written communication skills * Desire to learn Assembled's technical product and effectively communicate the platform's value to potential customers * Highly motivated self-starter who is eager to learn, open to feedback and excited about building a business ground up * Team player who is highly collaborative, goal-oriented, and resourceful within their sales processes * Comfortable working in a rapidly changing environment Our U.S. benefits * Generous medical, dental, and vision benefits * Paid company holidays, sick time, and unlimited time off * Monthly credits to spend on each: professional development, general wellness, Assembled customers, and commuting * Paid parental leave * Hybrid work model with catered lunches everyday (M-F), snacks, and beverages in our SF & NY offices * 401(k) plan enrollment

Job Title: Customer Service Associate - Help Power the Foodservice Industry Reports to: Assistant Store Manager / Store Sales Manager Classification: Hourly / Non-Exempt Are you a relationship-builder who thrives in a fast-paced, customer-focused environment? At Ace Mart Restaurant Supply, our Customer Service & Sales Associates are trusted partners to chefs, restaurateurs, and foodservice pros. Your positive attitude, attention to detail, and ability to guide customers toward the right products make a real impact on their success-and ours. This is more than a retail job. It's a people-first, solution-oriented role at the front lines of the foodservice industry. What We Offer: Work-Life Balance: Enjoy Sundays off to rest and recharge. Employee Discounts: Save on a wide range of professional kitchen equipment and supplies. Learning & Growth: Gain product knowledge and industry insight through hands-on training and mentorship. Paid Time Off: Take the time you need with vacation and sick leave. Comprehensive Benefits: Medical, dental, vision, and life insurance after 60 days. Financial Security: Participate in our matching 401k program and plan for the future. What You Will Do: Deliver a standout customer experience by greeting every customer with energy, positivity, and a service-first mindset-whether in person, by phone, or via email. Build lasting customer relationships by engaging in genuine conversations, earning trust, and becoming a go-to resource for restaurant and foodservice professionals. Guide purchasing decisions by listening carefully, identifying customer needs, and recommending the right equipment and supplies to support their success. Drive in-store sales by confidently promoting featured items, offering cross-sell suggestions, and ensuring customers leave with solutions-not just products. Follow up with intention by checking in with customers post-purchase and using follow-through to turn one-time buyers into repeat business. Support seamless service by offering carry-out assistance, coordinating deliveries, and stepping in to solve problems with professionalism and urgency. Maintain a clean and organized store that invites customers to browse, with well-stocked shelves, clear displays, and a polished presentation. Collaborate with a high-energy team by sharing product knowledge, supporting teammates, and participating in ongoing training to grow your impact. What You Will Need: A People-First Mindset: Friendly, helpful, and customer-focused in every interaction. Sales Savvy: Confident recommending and selling products that fit customer needs. Strong Communication: Clear, professional communication in person, by phone, and through email. Time Management: Able to multitask, prioritize, and stay organized during peak store hours. Physical Stamina: Stand and walk for extended periods, lift up to 50 lbs. regularly, and use computers/registers comfortably. Education & Experience: High school diploma or equivalent preferred. Prior retail, sales, or foodservice experience is a plus-but we'll train the right person. Join us as a Food Enthusiast & Customer Service Specialist and become an essential part of our team dedicated to delivering an exceptional experience to our valued customers. Ace Mart Restaurant Supply is an equal opportunity employer, committed to fostering a diverse and inclusive workplace. Your culinary passion and customer-focused approach will help us continue to create a haven for food enthusiasts.

Works as both a Fiscal Intermediary (FI) and a Support Broker. Ensures persons supported have the opportunity to make choices; develop and achieve; participate in community; maintain good health and secure personal future; be treated with respect and dignity; and experience relationships with family members, friends and neighbors. As an FI: Responsible for the oversight of the Self-Direction Plan/Budget on their caseload ensuring the person supported their families and circle of support to self-directed services work within the individualized budget. Processes paperwork; bills for services; provides fiscal accounting and reporting; provides Medicaid, corporate compliance and general administrative and staffing supports; and works with persons supported, families and vendors to ensure services and reimbursements of funds are provided in timely and appropriate manner. As a Support Broker: Assist persons supported through a person centered approach by developing a circle of support and completing approvable individualized plans and budget for services. May provide training and support to persons supported to help in gaining skills and competencies needed to manage self-directed services. Minimum Education & Experience Bachelor's Degree in related field and two years' experience, working with individuals with intellectual and developmental disabilities Or Associates Degree in a related field and 4 years' experience, working with individuals with intellectual and development disabilities FI experience and trainings preferred. Broker experience and current broker trainings required by OPWDD preferred. Any equivalent combination of education and/or experience from which comparable knowledge, skills and abilities have been achieved may be considered. Licensure/Certification * Valid NYS Driver's License. Availability of insured personal vehicle to transport self and occasionally individuals as necessary. Additional liability insurance for occasional transport of individuals served is recommended.

Experienced Caregiver Caregiver-Day in the life Video Bergen County, NJ Senior Helpers is seeking an experienced Caregiver to join our fast-growing team. The ideal candidate is a compassionate, motivated individual with a minimum of 1 year experience working with seniors providing in-home care and care in facilities. Benefits Flexible hours Mileage reimbursement Hourly or Live-in shifts available Health Care Plan Employee Referral Bonuses Paid skills training benefits and more Responsibilities: Assist with personal care and daily living activities, including: personal hygiene, dressing, eating, mobility, meal preparation, activities that the client may enjoy ie playing cards/games, going on outings or taking walks and running errands. Performs patient-specific activities, including: taking vital signs, assisting with exercising/ROM, assisting with ostomy appliques, and more. Performs homemaking activities which may include (but are not limited to): vacuuming, dusting, sweeping or mopping the floor, washing dishes, changing bed linens, doing laundry and cleaning the bathroom and/or other areas of the house that the client may use. Qualifications Must be 18 years of age or older High school graduate or G.E.D. certificate preferred. One year or more experience as a Personal Care Assistant in healthcare (in homes or facilities). Current CPR Certificate is a plus. Possess a valid driver's license and have use of an insured automobile or access to adequate transportation for the job. This position may require additional hours of technical training including vital sign checking, or patient

The CNC Lathe Operator is responsible for the manufacture of parts per plant specifications in an accurate and timely manner. Essential Duties and Responsibilities This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. 1. Set up; edit and operate CNC lathes. 2. Inspect completed parts to ensure conformance to specifications. 3. Cleans work area. 4. Remove tooling, fixturing, and return inspection equipment to proper area. 5. Minor machine maintenance (i.e. greasing, oiling, etc.) Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Basic Qualifications • Must be proficient using hand measuring instruments (micrometers, calipers, height gages, optical comparator, etc.). • Must be able to read and understand blueprints, specifications and routings • Ability to operate, adjust offsets; setup experience preferred, but not necessary • Ability to edit programs, fanuc controls, G code and M code programming • Requires mathematical skills that require the ability to add, subtract, multiply, and divide. • Must perform metric conversions. • Requires good oral and written communication skills in order to interact with employees. • Ability to true in jaws • Possess a good mechanical aptitude and/or prior machinist experience a plus Preferred Skills and Experience • Ability to work in a fast-paced environment. • Ability to communicate with all levels of the organization. • Ability to multi-task, establish priorities, set aggressive goals and achieve them. • Must be open to work overtime, as necessary. • 2 axis or 4 axis/live tooling • Ability to adjust taper on the OD/ID/face • Experience with tail stock and steady rests • Able to check pin size over threads • Knowledge of bore gages • Able to add extra passes to OD/bore/face if necessary • Experience on Mori Seiki, Daewoo, Danichi, Doosan Puma machines a plus Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The phrases "occasionally," "regularly," and "frequently" correspond to the following definitions: "Occasionally" means up to 1/3 of working time, "regularly" means between 1/3 and 2/3 of working time, and "frequently" means 2/3 and more working time). While performing the duties and responsibilities of this position, the employee is occasionally required to walk, use foot/feet to operate machine, reach above shoulders and move from place to place. The incumbent will regularly stand, sit and talk and listen and will frequently use hands to finger, handle or touch. Specific vision requirements for this position include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. During the performance of his/her work duties, the incumbent will be required to occasionally lift up to 50 pounds, and will frequently lift up to 25 pounds such as moving parts from material storage and moving parts in and out of work area. Competitive wages and benefits Job Type: Full-time PI4ab0715e24c4-37***********5

We're on the Moo-ve with new opportunities!! And you know, if it's Borden, it's got to be good! At Borden Dairy, we've embraced the "Glass Half Full" mindset since 1857. Guided by our beloved mascot, Elsie, we spread joy and optimism to American families everywhere. Our mission is simple: to be the best-in-class dairy brand in every market we serve. As we look to the future, Borden is entering an exciting phase - reintroducing Elsie to a new generation and reaffirming our commitment to quality, tradition, and community. Join Elsie's Herd today! POSITION SUMMARY Borden Dairy is seeking a safety-conscious and people-focused professional to join our team as a Maintenance Manager. In this dynamic leadership role, you will be responsible for overseeing the installation, repair, and ongoing upkeep of all company facilities and equipment. Core responsibilities include managing day-to-day maintenance operations, developing and implementing maintenance procedures, coordinating repair activities, and ensuring optimal performance of machinery and infrastructure. The ideal candidate will bring proven experience in facilities maintenance and team management, coupled with exceptional organizational and leadership skills. A strong technical understanding of machinery and equipment, along with excellent written and verbal communication abilities, is essential for success in this role. JOB RESPONSIBILITIES * Supervise and lead all maintenance processes and operations (including diagnosis and repair of production lines and systems, mechanical and electrical circuitry, prevention of food safety and quality problems, minor repairs to building and plumbing) Benchmark and set targets for overall maintenance department performance Maintain all machinery to ensure it's at working standards Create and implement maintenance procedures that support process consistency and cross functional collaboration utilizing Continuous Improvement methodology Conduct regular inspections of the facilities to detect and resolve problems Plan and manage all repair and installation activities Utilize the Limble software to facilitate proper PM adherence Ensure all department workers adhere to the safety policies and procedures Assign repair schedules and evaluate repair cost estimates Maintain supply and repair parts inventory and product loss control. Document and prepare daily progress reports and maintenance logs Oversee equipment stock and place orders for new supplies when necessary Track expenses and oversee the budget for maintenance QUALIFICATIONS High School Diploma or equivalent qualification Bachelor's degree in business administration, Facility Management or similar field is preferred A minimum of 5 years' experience in maintenance Prior experience as a leader of a team Continuous Improvement methodology experience Good understanding of the technical features of plumbing, carpentry, electrical, ammonia, glycol and hydraulics systems Strong knowledge of facility machines and equipment Capacity to solve problems through creative, innovative solutions and challenge traditional methods of accomplishing tasks and removing obstacles Working Conditions: * Must be able to work for extended periods in a cold, damp environment * Occasionally exposed to fumes or airborne particles; toxic or caustic chemicals PHYSICAL DEMANDS Must be able to frequently stand, walk, kneel, reach, climb, pull, and bend. Must be able to routinely lift and/or move up to 50 pounds; and occasionally 75 pounds. Must be able to work for extended periods in a cold, damp environment. EEO Statement The Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a disabled veteran or other protected veteran, or any other characteristic protected under applicable federal, state, or local law, regulation, or ordinance, in all phases of the employment process and in compliance with applicable federal, state, and local laws and regulations in every location in which the Company has facilities. This continuing policy of non-discrimination applies to all terms and conditions of employment including but not limited to: recruitment or recruitment advertising, hiring, placement, promotions, demotions, transfers, layoffs, furloughs, recalls, terminations, leaves of absence, rates of pay or other forms of compensation, selection for training, internships, and apprenticeships.

Since 1907, ParkOhio Holdings Corp. (NASDAQ: PKOH) and their subsidiaries have provided the strategic services and products that allow the world's leading manufacturers to streamline their manufacturing processes and focus their core competencies on production of more efficient and high-quality products. ParkOhio is an industrial supply chain logistics and diversified manufacturing business operating approximately 125 manufacturing, distribution and service facilities and employing approximately 7000 people worldwide. Revenues are in excess of $1.6 billion with a customer base consisting of many of the Global 2000 infrastructure and business/personal/household products companies. ParkOhio operates through three reportable segments: Supply Technologies, Engineered Products and Assembly components. For more information: **************** The Engineered Products Group (EPG) is a diverse group of manufacturing businesses designing and manufacturing a broad range of highly engineered products. These products include induction heating and melting systems, tube & pipe threading and bending systems, forge and forming presses, and forged and machined components. The Industrial Engineered Group (IEG) is a sub-segment of the Engineered Products Group that focuses on the induction heating and melting business through global brands like Ajax TOCCO Magnethermic, GH, Lectrotherm, SAET, Pillar. IEG designs and manufactures world-class equipment for the foundry, heat treating, bar & tube (OCTG & API), steel processing, strip heating, forging & forming, and vacuum induction melting industries. The induction business also provides various services, including laboratory process development, preventative maintenance, equipment repair and parts, coil repair facilities, and installation services. Additionally, the IEG group includes pipe bending and threading with global brands like Colinet and PMC. The entire group is made up of more than 30 sites globally and is approximately $325M in annual sales. These companies are in a sub-segment of the Engineered Product Group, one of the three reportable segments of ParkOhio. Position Summary: The Vice President of Human Resources will lead all global HR strategy and operations for IEG across EMEA, China, Latin America, and North America. This executive will oversee a global workforce of 1,500+ employees and a distributed HR team, partnering directly with the IEG President and senior functional leaders. This role requires a proven HR leader with extensive global manufacturing experience, strong capability in engineering-centric businesses, and a track record of building and executing HR strategies that deliver measurable business results. Job Duties: - Lead the global HR function across 30+ sites, including talent management, organization design, leadership development, workforce planning, employee relations, and total rewards. - Partner with the President and executive team to shape organizational strategy and build HR capabilities aligned to growth and operational goals. - Manage and develop HR teams in distributed locations, ensuring alignment, capability building, and consistent global execution. - Build scalable HR programs such as performance management, succession planning, and leadership development that drive measurable improvements in capability, retention, and business performance. - Ensure compliance with employment, labor, and HSE regulations across multiple jurisdictions. - Act as executive-level advisor on workforce, culture, talent risks, and organizational design. - Lead HR components of M&A due diligence, integration, and organizational transitions. - Manages relationship with PKOH and provide information to corporate as required. - Maintains strict confidentiality and data integrity. What you need to be successful: - Bachelor degree in Human Resources or related field of study. - 10 + years in Human Resources leadership role leading HR teams at scale in multi-site manufacturing environment. - Proven success leading HR in global regions such as EMEA, China, and Latin America - Experience with an enterprise level HCM. Preferred Qualifications: - Graduate studies in Human Resources - SPHR certification We offer a competitive benefits package which includes medical, dental, vision, life insurance, 401(k) and more. ParkOhio provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Under the direction of the Human Resources Manager, the EHS Manager will develop, execute, and oversee comprehensive safety and environmental programs to maintain a culture of EHS excellence and compliance. The EHS Manager will act as a resource for all employees for their safety concerns by responding in a timely manner. ESSENTIAL RESPONSIBILITIES: GENERAL: Follow all Company safety policies and safety procedures in order to maintain a safe work environment. Follow all Company policies, rules and regulations. Act as a professional representative of Wausau Coated Products, Inc. at all times. Coordinate EHS services for the corporate office and manufacturing facility and the other company locations. Work with Company leaders to drive safety culture and support behavioral changes. Establish and promote the maintenance of a safe, incident-free and healthy work environment. Update Company leadership with safety and environmental results reporting, status of current projects, new regulations and potential areas of present or future concern. SAFETY: Maintain corporate compliance with all applicable OSHA safety and reporting regulations. Manage workers' compensation program and injury logs. Lead investigation of accidents and safety-related concerns (i.e. injuries, near misses, damage) and implement appropriate corrective action. Regularly review and update safety initiatives and programs. Conduct and coordinate the results of job safety analysis (JSA) to train employees and assist with the proper selection and placement of employees considering capabilities and/or limitations are suited to the job tasks involved. Set the safety training schedule and prepare training sessions, to include new hire training, weekly and monthly training topics, and annual required training. Coordinate emergency response plans including evacuation and severe weather response, training, and drills. Inspect Company facilities to detect existing or potential incident and health hazards; determine corrective or preventative measures where indicated; follow up to ensure measures have been implemented to ensure compliance with OSHA regulations. Work with property and workers compensation insurance representatives on inspections and risk management programs. Work with occupational health partners to address ergonomic issues and musculoskeletal injuries. Oversee emergency medical responders and injury care. Facilitate Company Safety Committee meetings, i.e. create action items, establish goals, monitor progress, coordinate committee member rotation, and maintain committee meeting minutes. Maintain and update Safety Manual. Maintain safety-related files and records in compliance with local, state and federal regulations, i.e. policies, procedures, training, inspections, audits, incident reports, OSHA Log 300, Safety Committee meeting notes. Oversee the administration of workers' compensation program, including working with the insurance carrier, Company leaders and Human Resources in case management and administering effective return to work program for injured employees to minimize employee lost time and claim costs. Prepare material/evidence for and actively participate in workers' compensation-related hearings, lawsuits and insurance investigations. Responsible for preparation and management of the annual safety budget; manage safety vendors, including safety inventory. ENVIRONMENTAL: Maintain compliance with DNR and EPA environmental regulations including air permitting, hazardous waste, storm water, underground storage tanks, etc. Maintain and monitor hazardous materials per permit requirements. Manage MSDS Online System to include Safety Data Sheet (SDS) review for raw materials. Monitor and evaluate regulatory policies and procedures on a quarterly basis to ensure compliance from all levels of the Company, i.e. hazardous raw materials usage. Update regulatory information on Company-specific product specification sheets, ensuring all environmental/regulatory information is accurate and current. Timely completion of customers' environmental/regulatory surveys and requests for “letters of compliance”. Complete the required bi-annual reporting to maintain compliance with “Reach” program. Actively manage chemical waste disposal, including organization of waste collection area, arranging disposal pickup by partner/vendors, and documentation of chemical waste profiles. Assist with reporting and certification efforts, including but not limited to: UL Testing, CPSIA, PFAS, and heavy metal testing. POSITION REQUIREMENTS: Bachelor's Degree in Safety or Environmental Science is desired. Three (3) to five (5) years experience in a manufacturing environment required. Previous safety management in a manufacturing environment is desired. Professional certification (ASP, CSP, CIH, etc.) preferred. In-depth working knowledge of EHS regulations, including OSHA and EPA Working knowledge of local EHS regulations is required. SPECIFIC SKILLS, LICENSURE AND CERTIFICATIONS: Proficient in local, state and federal safety regulations, including OSHA regulations and practices. Advanced computer skills to include: MS Word, Excel and Outlook. Advanced communication skills to include: person to person, large group presentation, written and phone. Ability to work with multiple priorities, prioritize and organize workload. Good organizational skills, including the ability to handle multiple projects at the same time. Project management experience. Problem analysis and problem resolution. Willingness to be a team player. Ability to maintain confidentiality. Confidence and professionalism in representing the Company.

at a company with a strong family orientated culture? As a Fitness Engagement Specialist, you are responsible for developing, implementing, and managing fitness programs and overall Fitness Center Guidelines that promote employee and family health and well-being. Responsible to design initiatives and programs that encourage participation, improving overall family wellness, and ensuring the smooth operation of fitness-related activities within Belmark. All activities and engagements must align and promote Belmarks culture. Responsible for basic facility maintenance, cleanliness, and operation, ensuring a welcoming and safe environment for all participants. As part of our Human Resources Department, we strengthen our culture through support and care for our biggest asset: our people. Our teams work environment is fast paced, but our tight-knit HR team thrives through team work and collaboration. If this sounds like a role and environment you would succeed in, apply today! Belmark creates many of the labels, cartons, pressure sensitive and flexible film we as consumers see daily when shopping for various items. Our primary markets are in the food and beverage industry. A nationally recognized company; our customers vary from small to large companies, and customer satisfaction is our primary goal. By following our company mission of speed-to-market, product development, service development and quality, we have created a company dedicated to our customers, and created a culture that values each of our employees. Schedule: Flexible hours based on business needs for a total of 40 hours per week. Pay: Non-exempt * INTERNAL APPLICATION DEADLINE: Tuesday, January 20, 2026* What will I do in this role? Design, implement, and manage fitness programs, including group classes, wellness challenges and special fitness events. Greet and welcome fitness center visitors and provide guidance to the usage and offerings of the facility. Develop strategies to increase employee participation in fitness initiatives, ensuring programs meet diverse needs and interests. Monitor, track and analyze program participation and effectiveness, providing regular reports and recommendations for improvements based on data. Coordinate the maintenance and scheduling of the fitness center, including managing equipment, classes, and ensuring safety and sanitary standards are maintained. This includes coordination with internal maintenance team or a 3rd party provider, as well as ordering and inventory of supplies. Collaborate with third party fitness providers, trainers and experts to enhance program offerings. This includes the selection and scheduling of instructors and classes. Partner with the Internal Communications Specialist to create communication content to market the facility and offerings. Partner with on-site medical personnel to ensure streamlined communication and offerings for employees. May complete assigned special projects based on business need. Responsible to follow all safety procedures as required by the role, and to nurture a food safety culture by adhering to all Safe Quality Foods requirements. Great benefits for the entire family! Health, Dental plan with Wellness discount FREE On-site Health Clinic Flexible Spending Account Life Insurance 401(k) and Profit Sharing Plan with 6% match Paid vacation AND personal time Paid holidays beginning day one Employee Assistance Program FREE On-site Fitness Center Minimum Qualifications: Requires education as is typically acquired through an Associates degree. A Bachelors degree in Health Science or related field preferred. Certifications from at least one of the following is preferred: American College of Sports Medicine (ACSM), National Strength and Conditioning Association (NSCA) or National Academy of Sports Medicine (NASM), and/or Personal Trainer certification. Two (2) years experience with corporate wellness, fitness programming, or related field is preferred. Knowledge of and the ability to effectively utilize the English language. Requires strong communication and organizational skills. Ability to engage with and motivate employees and family members. Knowledge of health and fitness best practices, and the ability to apply this knowledge to a corporate setting. Ability to create and maintain relationships with key stakeholders and vendors. Proven comfort with Microsoft Office skills (Word, Excel, PowerPoint, Outlook). Non-sales job postings are limited to residents in the states of Wisconsin and Arizona only. Belmark is an Equal Opportunity Employer.

The Administrative Assistant will be responsible for performing a wide range of duties including providing support to senior level management, performing Human Resources administrative tasks and operations support to sustain the efficient operation of the Burlingame site. The following reflects management's definition of essential functions for this job but does not restrict the tasks that may be assigned. Management may assign or reassign duties and responsibilities to this job at any time due to reasonable accommodation or other reasons. Support Senior level management with scheduling meetings, domestic and international travel arrangements, expense reports, and written correspondence. Contribute to team objectives by assisting departments with projects and tasks. Sort and distribute all incoming and outgoing correspondence. HR Administrative functions; onboarding (new hire orientation and paperwork), scheduling interviews, greet candidates upon arrival and roll out HR related initiatives. Establish, organize and manage the maintenance of office records, ensuring complete accuracy and confidentiality Responsible for ordering and maintaining all supplies and food for office. Collaborate with Facilities Manager to maintain office equipment and space. Proactively support office needs. Minimal Qualifications: Bachelor's degree or 2 years equivalent experience. Proficiency in Microsoft Excel, Word, PowerPoint, Outlook. Preferred Qualifications: Ability to work independently on a broad variety of projects. Strong communication of the English language, including reading comprehension, oral and written communication skills. Ability to establish and foster healthy working relationships. Strong level of influence and negotiation skills. Ability to deliver effective results, meet tight deadlines and targets. Possess good judgment and decision-making skills. Experience with basic Human Resources administrative tasks, including but not limited to on-boarding. Must successfully handle highly confidential information. Physical/Mental Requirements: While performing the duties of this job, the employee is frequently required to do the following: Sitting, using a computer Lifting 5-10 lbs. occasionally Work Environment: Office Setting 100% No travel Required experience: supporting Senior Level management: 2 years

Primary Purpose of the Role The Vice President of Supply Chain Planning is a critical executive role responsible for synchronizing demand and supply across Hoffmaster's complex North American manufacturing footprint and both foreign and domestic suppliers. Reporting to the Chief Operating Officer, this leader will oversee a multi-plant environment (6 plants) with a heavy focus on high-volume, commodity-driven Sales, Inventory, and Operations Planning (SIOP). This role is the primary process owner of the S&OP including the responsibility to drive continuous improvement in the maturity of the process, architects & leads change management and adaptation of all improvements across the organization, along with the administration of process and data integrity. The role is the principal driver of business application capabilities and future enhancements that improve the end-to-end planning process and systems of a segmented Supply Chain. The technical aspect of this role involves understanding and driving the development of segmented supply chain models in order to support Make to Stock (MTS) and Build to Order (BTO) products. This should include the development of an optimized planning process, system and tools which will provide the capabilities to support the changing go-to market strategies. Essential Job Duties Own and mature the monthly Sales, Inventory, and Operations Planning process to align sales forecasts with production capacity and financial objectives. Drive all aspects of the S&OP process as well as thought leadership and Strategy Development and Deployment throughout the business. Obtain support for the SIOP process and plan through collaboration with all aspects of the organization to gain effective stakeholder alignment through change management techniques. Synchronize production scheduling and material flow across six North American plants to optimize equipment utilization and meet customer service targets. Optimize finished goods and raw material inventory to balance working capital with a high-service "never-out" retail or commercial requirement. Lead long-range capacity modeling to determine when to add new lines or footprints based on market growth in the disposable products sector. Key metrics associated with the function include forecast accuracy, OTIF, working capital, inventory turns, schedule compliance, capacity utilization, as well as assisting with the development of leading indicators that enable visibility to short and long term market trends and demand. Partner with Finance and SLT to ensure alignment of the S & OP process with the financial forecasting processes and working capital goals, including AOP and LRP. Required Skills/Abilities Bachelor's degree in supply chain, business or a related field is required. An MBA is preferred 12-15+ years of experience in demand or supply forecasting, preferably within high-volume manufacturing (paper, CPG, or disposable goods) Deep expertise in ERP/MRP systems and data visualization tools like PowerBI or Tableau. APICS (CPIM/CSCP) or Six Sigma Green/Black Belt certifications preferred. Demonstrated success in defining and implementing an S &OP process within a complex environment where data is not immediately available and deductions will need to be drawn based on limited input. Strong facilitation and presentation skills; has successfully facilitated initiatives that improve process and a culture of change. Proactive change agent and possess leadership skills to build and maintain a team-oriented environment. Individual must possess excellent oral and written communication skills and have the ability to interface and influence up and down the organization to drive stakeholder buy-in. Demonstrated mastery of project management and analytical skills.

Digital Hardware Design Engineer Cincinnati, OH area $120,000 - $150,000 28978 For almost 100 years, this company has been helping shape the world of wireless communication. Led by a group of engineers, innovators, and problem-solvers, they have the ability to turn bold ideas into real, reliable technology. If you're excited by cutting-edge wireless communication, love being hands-on with digital hardware, and enjoy building things that actually go out into the world, you'll fit right in with this growing organization. The Role: Digital Hardware Design Engineer We're looking for a Digital Hardware Design Engineer who's eager to work on advanced wireless communication systems and high-speed digital hardware. You'll be part of a team pushing boundaries in RF, digital modulation, and next-generation broadcast tech. What you'll be doing Designing high-speed digital hardware for data-acquisition and RF-related systems Working on products that span everything from Long Wave all the way through S-Band Developing digital modulators with adaptive pre-correction and crest factor reduction on FPGA platforms Using VHDL to design and verify FPGA implementations (primarily Xilinx) Working with digital RF waveforms and modulation schemes like COFDM, QAM, QPSK, and 8VSB What We're Looking ForBS in Electrical Engineering or similar 3-5 years of design experience (5-10 years in digital wireless communication preferred) Experience working in R&D within tech-focused companies 3 years working with RF and digital communication systems Strong understanding of communication and signal-processing theory (4+ years demonstrated) Proven digital hardware design skills, including schematic capture and high-speed board design 5+ years using Altium and/or Mentor Graphics PADS for schematic and PWB design Please apply or send us a copy of your resume to ******************. All of your information will be kept confidential. Please feel free to call us at ************. Applications that fit the listed requirements will be contacted within 2-3 business days to schedule an initial phone interview with the Omni One team

is located onsite in Broken Arrow, Oklahoma*** WHO ARE WE: BlackHawk Industrial provides you the highest quality industrial products and equipment, offering manufacturing services while creating innovative engineered supply solutions. We truly believe in the importance of the local relationships with the customers we service. Our employees have fun every day exceeding the expectations of our customers, suppliers, and shareholders. We distinguish ourselves as the #1 choice of industrial manufacturers who are in need of Technical Service and Production Savings. We are BIG ENOUGH TO SERVE, and SMALL ENOUGH TO CARE. SUMMARY: The Customer Service Representative is responsible for the daily tasks related to all customer accounts and Account Manager needs. The Customer Service Representative communicates and coordinates with suppliers and Account Managers, while providing quality customer service. ESSENTIAL DUTIES AND RESPONSIBILITIES: Personally exhibits, recruits and coaches associates consistent with BlackHawk Core Behaviors Responsible for promoting culture of safety Respond appropriately and in a timely manner to all customer and Account Manager incoming communications. Analyze and assess customer needs completely and accurately with efficiency. Work with suppliers and Account Managers to identify, source, and price appropriate product solutions and provide quotes for product solutions per OS ticket and other BHID response time guidelines. Process customer orders, Return Material Authorizations and Guaranteed Test Orders and purchase material's to fill customer orders. Review and maintain P21 portals daily for potential late orders, Return Material Authorizations, items not on a PO and unapproved orders. Identify and resolve root cause issues by working and communicating with responsible cross functional teams to minimize repetition of the original issue. Develop a detailed working knowledge of BlackHawk policies, procedures and practices. Maintain a deep understanding of the BHID systems (including P21, OS ticket, ServiceNow, SharePoint, and Compass), suppliers' systems/websites and usage of those systems. Perform all work in accordance with the company documented ISO processes and procedures utilizing appropriate company systems. Perform other duties as assigned QUALIFICATIONS: Excellent written and verbal communications skills utilizing phone, email and instant message. Excellent critical thinking skills to analyze and solve problems. Diligent and detail oriented. Ability to manage multiple tasks, shift gears to react to urgent scenarios and meet daily deadlines. Proficient in and comfortable with basic computer operation. Ability to learn new software programs as a user. Ability to learn and apply experience with vending platforms (CribMaster, Autocrib, etc.) Experience in industrial field, B2B sales and customer service. SUPERVISORY RESPONSIBILITIES: No direct supervisory responsibility. EDUCATION and/or EXPERIENCE: High school diploma or equivalent required. Minimum 1 year previous experience in customer service or inside sales preferred. Experience in cutting tools, abrasives and MRO areas preferred. Experience with Microsoft office suite required. CERTIFICATES, LICENSES, REGISTRATIONS: None required WORK ENVIRONMENT: Employee is regularly required to speak and understand English, stand, walk, sit, use hand to finger, handle or feel objects, tools or controls; reach with hands and arms. Employee is required to use computer and other equipment. Employee frequently lifts and/or moves up to _50_ pounds. Specific vision abilities include close vision and the ability to clearly focus vision. PPE REQUIRED: Wrist rest for keyboard and mouse pad BENEFITS: Health Insurance BCBS of OK HDHP HSA with Employer match (must meet criteria) Dental and Vision Insurance 401K Plan and Company Match FSA (Full FSA, Limited FSA, and Dependent FSA) Company paid Long Term and Short-Term Disability Company paid basic Life Insurance and AD&D/ Supplemental life and AD&D/Dependent life Ancillary Critical Illness Insurance (Wellness Rider Included) Ancillary Accident Insurance (Wellness Rider Included) Ancillary Hospital Indemnity Employee Assistance Program (EAP) - Includes concierge services and travel assistance. Paid Time Off Holiday Paid Time Off Gym Reimbursement Quarterly Wellness challenge with a chance to will money or prizes Tuition Reimbursement - after 1 year of employment *BlackHawk Industrial is an Equal Opportunity Employer **As part of our BHID policy, we require all potential employees to undergo pre-employment background and drug screening. This is a standard procedure we follow to ensure a safe and productive work environment.

Preco is now hiring for a Full-Time Metrologist in Somerset, WI. The Metrologist is responsible for developing, optimizing, and maintaining precise measurement routines and systems that ensure product quality and conformance to specifications. This role involves creating turnkey CMM (PC-DMIS) and MicroVu measurement programs for production and inspection use, troubleshooting and improving existing routines, and collaborating with engineering. The position also supports critical quality functions such as First Article Inspections (FAIRs), capability studies, Gage R&R, and calibration activities. Preco is a leading designer and manufacturer of precision automated processing systems for high-speed and high-accuracy cutting, perforating, welding, and other specialized industrial processing applications. With our proprietary die cutting and laser-based manufacturing capabilities, Preco has also become one of the largest contract manufacturing service (CMS) providers in North America. Key Responsibilities: Create measurement routines on the CMM (PCDMIS) and MicroVu that are turnkey for production and inspectors. Troubleshoot and correct issues with current measurement routines. Lean out current measurement routines making them as efficient as possible. Eliminate waste of movement or unnecessary measurements on the CMM. Work with engineering to create robust fixturing to stage components and assemblies for measurement on the CMM and MicroVu. Perform First Article Inspections (FAIRs) on components and assemblies. Populate FAIR form along with a bubble numbered print of the current revision. Gather data for Gage R&R's, DOE's, and capability studies. Populate minitab with data for Engineering analysis. Review measurement data to ensure accuracy, consistency, and reliability. Identify and remeasure outlier data points. Author measurement procedures (MP's). Create measurement routines on the CMM for the calibration of production gages. Work with calibration to maintain measurement gages. Complete inspections for production as necessary. Provide technical support and advice to other departments or personnel. Train others on proper measuring equipment and measuring techniques. Collaborate with engineers to resolve measurement challenges. Perform any necessary equipment checks to ensure proper calibration and functionality prior to use. Maintain a clean, organized work area. Culture Development: Strong team player with excellent interpersonal skills; able to collaborate effectively and professionally with individuals across various roles and technical backgrounds. Committed to excellence and to serving others across all levels of the organization and beyond. Ability to work and be effective with minimal direct supervision. Strong analytical and problem-solving skills. Detail-oriented with a commitment to accuracy. Drive a positive and inclusive workplace culture. Adhere to all safety regulations and company policies. Job Qualifications: High School Diploma or equivalent. 5+ years of experience with CMM programming. Experience programming for complex parts. Ability to identify outliers and spot patterns in datasets. Strong computer skills, including proficiency in Microsoft Word and Excel. Preferred Qualifications 2-year Technical Degree in Quality or related field. Real-world application of PC-DMIS (Personal Computer Dimensional Measurement Interface Specification) is strongly desired. 5+ years of experience in machining, blueprint reading, and interpreting GD&T (Geometric Dimensioning and Tolerancing) is preferred Our dedicated staff keeps us at the leading edge of precision automated processing systems in our industry. When you work at Preco, you have the opportunity to apply your skills to create optimal solutions for our customers. We have a collaborative culture and a team united by a passion to provide solutions to our customers. Preco has partnered with Hueman for its recruitment needs. If you are interested in learning more about a career with Preco as a Metrologist, apply today!

This position will require that you leverage your technical acumen and multi-channel presentation skills to present product demonstrations both in person and via the web. You will drive the sales cycle from first contact to close. Responsibilities: Articulate and present a compelling value proposition via customer meetings, telephone, and the web. Develop a territory: identify and qualify opportunities; pursue conversion of qualified leads to customers with monthly recurring revenue. Implement a disciplined sales process to drive transactions. Qualifications: Bachelor's degree. A minimum of 3 years proven, successful inside and/or outside sales experience. Demonstrated collaboration and negotiation skills. Proven track record of meeting and exceeding sales quota. Positive attitude, high motivation level and a passion for building a business.

Applied Physics is seeking a highly motivated Senior Electro-Optical Engineer to join our team. The successful candidate will be responsible for leading the development, design, and testing of optical systems for space-based applications. The ideal candidate will have a Bachelor's degree in Optical Engineering, Physics, or a related field and 5 or more years of professional experience, a Master's degree and 3 or more years of experience, or a related PhD. Qualifications: Bachelor's degree in Optical Engineering, Physics, or related field; or equivalent combination of education and experience Experience fabricating, designing, or fielding tactical or space-based optical systems and relevant performance parameters Experience with integration, test, characterization, and/or verification of optical systems Active Top Secret security clearance or equivalent Requirements Lead a small optical engineering team as the Certified Principal Engineer (CPE) for the build and test of prototype or high TRL optical sensor hardware Perform optical analysis to determine ability of designed optical systems to meet specifications Work with Systems Engineering to perform system level design and decomposition into optical system requirements Participate in studies and system trades for enhanced capabilities Lead development of materials for program technical reviews and present data throughout the product development and maturation processes Procure optical components to specification to meet performance goals Lead development of build documents, hardware assembly, integration, test planning, and test execution of optical systems Report progress periodically to program leadership and external customers and clients Support spacecraft integration within a program coordinating across multiple disciplines to ensure requirements verification Participate in failure investigations and anomaly resolution boards Work with Certified Principal Engineers (CPEs), Responsible System Engineers (RSEs), designers, and test engineers to ensure smooth integration at the system level Demonstrate effective verbal communication, develop concise and professional technical presentations, and deliver briefings to peers, leadership, and customers Benefits We offer a competitive salary and benefits package, flexible work hours, and opportunities for growth and career development. Join our dynamic and passionate team and help us make a positive impact on the world. If you are a talented, motivated, and empathetic individual who shares our passion for making a difference, we encourage you to apply for this exciting opportunity to work with our team at Applied Physics. Applied Physics is an equal opportunity employer.

WHO ARE WE: BlackHawk Industrial provides you the highest quality industrial products and equipment, offering manufacturing services while creating innovative engineered supply solutions. We truly believe in the importance of the local relationships with the customers we service. Our employees have fun every day exceeding the expectations of our customers, suppliers, and shareholders. We distinguish ourselves as the #1 choice of industrial manufacturers who are in need of Technical Service and Production Savings. We are BIG ENOUGH TO SERVE, and SMALL ENOUGH TO CARE. SUMMARY: The AR Specialist is responsible for processing vendor invoices and maximizing cash flow and minimizing risk, while balancing customer and branch relationships for their assigned region. ESSENTIAL COMPETENCIES AND RESPONSIBILITIES: Personally exhibits, recruits and coaches associates consistent with Core Behaviors Responsible for promoting culture of safety Process all vendor invoices for prompt payment Reconcile vendor statements and research discrepancies Research and solve problems with invoices/payments Correspond with vendors and respond to inquiries Cultivate and sustain crucial relationships with our customer base, as well as BlackHawk corporate and branch personnel Form collection strategies to mitigate customer objections to making timely payments Confirm validity of account discrepancies by obtaining and investigating information from customers, sales, and customer service Maintain customer accounts by researching short pays, credit balances, unapplied cash, etc Maintain collection goals set by BlackHawk senior management and general A/R performance levels Collaborate with department and branch management to identify high risk accounts and develop an action plan Perform other duties as assigned Perform all work in accordance to ISO processes and procedures QUALIFICATIONS: Expert data entry skills Strong attention to detail Excellent oral and written communication skills Proficient in MS Office Demonstrated problem solving and analytical skills Experience in Prophet 21 highly desirable Proven customer service skills Ability to work independently Proficient time management and organizational skills SUPERVISORY RESPONSIBILITIES: No direct supervisory responsibility. EDUCATION and/or EXPERIENCE: High School Diploma required Bachelor of Science degree in Finance, Accounting or Business Administration preferred 2 to 4 years accounts receivable or general accounting experience preferred REASONING ABILITY: Employee responds to commonly occurring problems/situations for which standards, procedures or precedents exist. CERTIFICATES, LICENSES, REGISTRATIONS: None required WORK ENVIRONMENT: Employee is regularly required to speak and hear English, stand, walk, sit, use hand to finger, handle or feel objects, tools or controls; reach with hands and arms. Employee is required to use computer and other equipment. Employee frequently lifts and/or moves up to _25_ pounds. Specific vision abilities include close vision and the ability to clearly focus vision. PPE REQUIRED: Wrist rests for keyboard and mouse pad. BENEFITS: Health Insurance BCBS of OK HDHP HSA with Employer match (must meet criteria) Dental and Vision Insurance 401K Plan and Company Match FSA (Full FSA, Limited FSA, and Dependent FSA) Company paid Long Term and Short-Term Disability Company paid basic Life Insurance and AD&D/ Supplemental life and AD&D/Dependent life Ancillary Critical Illness Insurance (Wellness Rider Included) Ancillary Accident Insurance (Wellness Rider Included) Ancillary Hospital Indemnity Employee Assistance Program (EAP) - Includes concierge services and travel assistance. Paid Time Off Holiday Paid Time Off Gym Reimbursement Quarterly Wellness challenge with a chance to will money or prizes Tuition Reimbursement - after 1 year of employment *BlackHawk Industrial is an Equal Opportunity Employer