Allied Power Group jobs in Houston, TX - 17511 jobs

DESCRIPTION: (Including but not limited to) Working within a team environment, the Blast Operator position is responsible for the blasting duties centered on ensuring parts to be coated are cleaned and prepped by customer specifications as contained within the work order. KEY FUNCTIONS Will operate in machine blast operations, forcing abrasive material onto a component's surface through a nozzle. Loads parts into sandblast equipment, maintains adequate supply of blast sand in hopper. Configure and run blast machines in accordance with the customer's specifications. Collect materials, tooling, and blast products prior to initiating operation. Use hand tools to repair, clean, and adjust equipment. Comply with all company policies and procedures including Health, Safety and Quality Assurance policies. Checks work visually, makes minor decisions; detects and reports defective items and unusual conditions to proper supervision. Sand blasts parts following established methods and procedures to remove surface contaminants and imparts proper surface finish. Perform other related duties as assigned. *This job description is a summary of the primary job scope and should not be assumed as an all-inclusive description* WORK QUALIFICATIONS: Required: A minimum of two (2) years of experience in a manufacturing or warehouse facility Proven proficiency in fundamental shop math, including handling fractions and decimals Proficient in the use of hand and power tools for successful job performance Ability to work in a team environment and effectively communicate Ability to follow directions and procedures Ability to analyze and resolve problems in a logical and effective manner Required: 2-5 years of Industrial Gas Turbine Repair experience Basic computer skills Educational Requirements: Required: HS diploma or GED WORK ENVIRONMENT: Reasonable accommodation may be made to enable qualified individuals with disabilities to perform essential functions. Willingness to work a flexible schedule to meet the demands of the role. Must be able to sit, stand and walk for long periods of time or until the end of the assigned shift. Must be able to lift 40 lbs. safely and properly, as needed throughout the assigned shift with or without assistance. Must be able to bend/stoop, squat, reach above shoulder height, crouch, balance, and push/pull. ADA JOB REQUIREMENTS: Reasonable accommodations will be made to ensure that the essential functions of the job can be performed and not hinder the employee's performance due to physical, mental, or emotional disability. EQUAL EMPLOYMENT OPPORTUNITY: Allied Power Group is an equal opportunity workplace. All employment decisions are made without regard to sex, race, color, religion, national origin, citizenship, age, disability, marital or veteran status, sexual orientation, gender identity or expression, or any other legally protected categories. This includes providing reasonable accommodation if requested for disabilities or religious beliefs and practices.

Lowery Metals Paradise is hiring an Inside Sales Operator. This is a front-facing position that will help create sales tickets and provide customer support both in-person and over the phone. Qualifications: Experience working with Windows Operating System Conversational or fluent in Spanish Quick learner and self-motivated Knowledge of Business Systems is a plus Compensation includes: Bonus Medical Insurance Vacation Time, Holidays, and Rotating PTO Understanding Family Needs Please email ********************** with your resume if interested.

GMi is a 100% employee-owned, client relationship-driven commercial construction company specializing in drywall, framing, and acoustical solutions. Established in 1978, GMi operates throughout Texas with offices in the Dallas/Fort Worth Metroplex, Austin, Houston, and San Antonio. Our market sectors include multi-family, hospitality, medical, religious, entertainment, mission-critical, retail, and industrial. What sets GMi apart is our dedication to providing detailed, accurate estimates and to working with experienced operations staff who aim to exceed client expectations. About the Role GMi is seeking a strategic, hands-on Chief Innovation Officer (CIO) to lead our enterprise-wide technology strategy. This role is responsible for building a modern, scalable IT ecosystem that accelerates growth, enhances operational efficiency, and strengthens our competitive edge. The CIO will oversee all IT functions-including core business systems, cybersecurity, data, collaboration tools, and field mobility-while shaping the future-state technology organization. This is a key leadership position for an executive who can combine vision, execution, and technology expertise to drive measurable business outcomes. What We're Looking For 10+ years of IT leadership experience. Prior experience as a CIO or senior IT leader in a 100-500 user environment. Construction industry experience preferred. Hands-on expertise with: ERP/financial systems PSA or project management platforms Microsoft 365 (Exchange, SharePoint, Teams, OneDrive) Networking, cloud/on-prem infrastructure, and cybersecurity Proven ability to build and elevate an IT organization. Strong financial and business acumen. Exceptional communication skills with a talent for explaining technical concepts in business terms. What You'll Do Technology Strategy & Leadership Build and execute a 3-5-year IT roadmap aligned with company growth and operational priorities. Advise executive leadership on technology strategy, investments, and emerging solutions. Develop an IT organization that scales effectively through internal talent and strategic partners. Core Systems & Modernization Oversee ERP, financial systems, PSA tools, project management platforms, and operational applications. Evaluate and modernize core systems to eliminate redundancies and improve efficiency. Drive workflow integration between office and field operations to reduce manual processes. Lead change management, resource planning, and structured project execution. Field Technology & Operations Improve field technology through modern mobile solutions, connectivity enhancements, and device optimization. Support safety, quality, and productivity through improved data capture and reporting. Cybersecurity & Risk Management Own the company's cybersecurity strategy, incident response plan, and risk posture. Manage identity protection, endpoint security, backup/DR, and compliance requirements. Lead business continuity and disaster recovery planning. Oversee physical security technology across all locations. Data, Reporting & Analytics Build a data strategy that drives visibility into performance, profitability, and decision-making. Create standardized dashboards and KPIs in partnership with finance and operations. Establish data governance practices to ensure accuracy and consistency. Vendor & Budget Oversight Manage IT and telecom budgets, contracts, and renewals. Lead vendor selection, negotiation, and performance management. Determine the right mix of in-house and outsourced resources. Team Leadership & Culture Build and mentor a team supporting helpdesk, infrastructure, applications, and business systems. Establish scalable IT processes for support, change management, asset management, and onboarding/offboarding. Promote a proactive, service-oriented IT culture. Chief Innovation Officer (CIO) Location: Southlake, Texas (On-Site) Employment Type: Full-Time Reports To: Chief Financial Officer (CFO) Salary Range: $300,000-$350,000 We look forward to hearing from you, but please understand that I will be contacting those who are applicable for the role. We are an equal opportunity employer that welcomes applications from all individuals.

The Opportunity You: Innovator. Pacesetter. Agent of change. If you're a tech savvy, process improvement-focused Student Champion with a talent for developing partnerships with communities and individuals, we're looking for you. Highlights: We are currently seeking an exceptional individual who will advance the institution's proud tradition of excellence in academics, student life and community service. Next steps: If you always have the student experience in the forefront of your planning and execution, if you're a collaborator, an innovator and a person who gets things done, apply today! EDUCATION High school diploma or GED Required. AAS or Bachelor's Degree preferred. EXPERIENCE 36 months work experience in the field required. KNOWLEDGE, SKILLS AND ABILITIES Possess the ability to work in a diverse work environment Willing and able to teach day, evening or weekend classes at a number of sites around the city Knowledge and skill in a variety of computer usage and software are required Excellent interpersonal skills and the ability to communicate effectively with a diverse professional, community, and student population Possess good organizational and planning skills Demonstrate sensitivity to students with diverse academic, socio-economic, cultural and ethnic backgrounds and students with disabilities. Demonstrated ability to inspire and motivate students in a learning-centered environment Self-disciplined and able to effectively manage others The Organization Houston Community College (HCC) is composed of 14 Centers of Excellence and numerous satellite centers that serve the diverse communities in the Greater Houston area by preparing individuals to live and work in an increasingly international and technological society. HCC is one of the country's largest singly-accredited, open-admission, community colleges offering associate degrees, certificates, workforce training, and lifelong learning opportunities. The Team Play a central role at HCC as you keep our everyday operations running like clockwork. You'll get the chance to make things happen and work closely with inspiring leaders across different parts of the institution. Whether your role is supportive, administrative, financial or something else, you'll be part of a dynamic team that not only provides HCC students with cutting-edge academic and career tools, it also takes care of its people. Location Houston is a city with limitless possibilities: Fourth-largest city in the U.S. and home to 54 Fortune 500 companies, second only to New York City's 55. Approximately 145 languages are spoken here. Overall after-taxes living costs are 5.6 percent below the average for all 308 urban areas recently surveyed. Houston is a major-league sports town, and don't forget the annual Houston Livestock Show & Rodeo. The weather is great! Mild winters ensure that outdoor activities can be enjoyed year-round. World-renowned medical care. The Houston metro area has long been known for its first-rate healthcare system, with many Houston area hospitals consistently ranking among the nation's top institutions. With over 150 museums and cultural institutions in the Greater Houston area, museums are a large part of Houston's cultural scene. Houston is the Culture & Culinary Capital of Texas with more than 7,500 restaurants and eating establishments covering 60+ cuisines. If this sounds like the role for you and you're ready to join an amazing team, please apply right away. EEO Statement Houston Community College does not discriminate on the bases of race, color, religion, sex, gender identity and expression, national origin, age, disability, sexual orientation or veteran's status. The following person has been designated to handle inquiries regarding the non-discrimination policies: Osvaldo Gomez, Director EEO/Compliance, Title IX Coordinator Office of Equal Opportunity and Title IX PO Box 667517 Houston TX, 77266 ************ or ******************* HCC values its employees and their contributions, promotes opportunities for their professional growth and development, and provides a positive working and learning environment that encourages involvement, innovation, and creativity. Individuals with disabilities, who require special accommodations to interview, should contact **************.

Jobe Materials is a family-owned ready-mix concrete, asphalt, and construction aggregates supplier operating in West Texas and Southern New Mexico with over 800 employees. The company also manufactures precast and prestressed concrete products, and operates three railyards that provide track space for transloading activities and railcar storage. The company operates its own quarries to produce its own aggregates, and has its own fleet of trucks for delivery of its materials. Founded in March 2005, Jobe Materials has proudly served West Texas and Southern New Mexico with top-quality construction materials and industry expertise. While our company has been operating for 20 years, the Jobe name and our roots in the construction materials industries go back over five decades. Our leadership, operations, and core values reflect a long-standing tradition of excellence in building the foundations of our communities. Responsibilities: Assist the Human Resources Director in administering the day-to-day operations of the company's Human Resources department. Assist with the onboarding processes and data entry of new employees Ensure company compliance with federal, state, and local employment and benefits laws and regulations Aid in administering employee benefit plans and enrollment periods Aid in administering the company's weekly payroll operations Maintaining, auditing, and updating Human Resources files and documents Other typical Human Resources duties as assigned Qualifications: Bachelor's degree in a Human Resources field of study 3-5 years of experience working in a Human Resources department, including 2 years direct involvement in employee relations 1 year experience in administering payroll operations Strong interpersonal, communication, follow-up, problem solving and creative thinking skills Excellent organizational skills, ability to multi-task with attention to detail Proficient with MS Word & Excel High level of discretion with confidential material and information Must be bilingual Salary Range: Approximately $60,000.00, but will be based on experience. Company Benefits: Jobe Materials provides competitive and generous benefits for its salaried employees. The company provides a 401(K) retirement plan with an employer match component. Jobe Materials prioritizes the health of its employees, and its health insurance benefits for its employees reflect that. A company cell phone and other necessary technology devices will be provided. Additional benefits would be discussed with candidates during the interview process. Equal Opportunity Employer: Jobe Materials is an equal opportunity employer. Jobe Materials shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. Applicants may apply using websites where this job posting is listed. Please send your resume with cover letter, references, and salary requirements to: Michelle Washington, Human Resources Director, *******************.

Directs, monitors and coordinates safety, health, and environmental (SHE) and compliance for The Company and companies regional locations. Essential Functions: Directs development and implements all SHE and compliance programs to ensure full compliance with corporate policies and procedures and applicable local, state, and federal laws and regulations. Job Functions: · Conducts periodic reviews and audits at Company locations to identify potential hazardous conditions and recommends corrective actions to location management. · Manages potential safety impacts in a cost effective manner while adhering to regulatory requirements. Disseminates safety management information to all Company regional locations. · Interfaces with regulatory development process directly and/or through various trade associations to effect reasonable health, safety and loss prevention laws and regulations. · Coordinates and participates in key negotiations with regulatory agencies. · Implements programs that reduce lost time accidents at Company regional locations. · Develops and monitors health and safety programs to increase awareness in all areas of the workplace. · Develops and implements programs to reduce risks at each Company regional location. Work Experience: 2-4 years safety management experience with industry or government, including minimum of two years in plant operations, including process or manufacturing with a direct involvement in safety & occupational health activities

Jobe Materials, L.P. (“Jobe Materials”) is seeking a Safety Director Jobe Materials is a family-owned ready-mix concrete, asphalt, and construction aggregates supplier operating in West Texas and Southern New Mexico with over 700 employees. The company also manufactures precast and prestressed concrete products, and operates three railyards that provide track space for transloading activities and railcar storage. The company operates its own quarries to produce its own aggregates, and has its own fleet of trucks for delivery of its materials. Founded in March 2005, Jobe Materials has proudly served West Texas and Southern New Mexico with top-quality construction materials and industry expertise. While our company has been operating for 20 years, the Jobe name and our roots in the construction materials industries go back over five decades. Our leadership, operations, and core values reflect a long-standing tradition of excellence in building the foundations of our communities. Responsibilities: · Leading and developing a team of employees with the company's Safety Department · Overseeing and updating the company's safety programs and safety goals. This includes implementing new and existing safety polices and protocol. · Representing the company in front of OSHA and MSHA representatives during any inspections and/or investigations · Conducting audits and inspections of company facilities to ensure compliance with all laws and regulations. · Conducting regular risk assessments across all operations, identifying vulnerabilities, and developing mitigation plans to minimize exposure. Collaborating with other departments to implement best practices for risk reduction. · Researching, evaluating and recommending changes to operations to improve the company's safety performance · Training company employees on safety policies and regulations. · Regularly reporting to company management regarding the company's safety performance · Developing proactive processes, procedures, systems, and metrics to drive continuous improvement towards reducing or limiting potential hazards at company facilities. · Other responsibilities as delegated and determined by senior management. Qualifications: · Bachelor's Degree, preferably in safety or a related field. · At least eight years of experience in safety fields · At least four years of experience in a leadership or management role · Prior experience in the construction industry is preferred. · Prior managerial experience · Certified Safety Professional (CSP) designation is preferred. · Knowledge of OSHA regulations, inspections and investigations. Preferred to have OSHA “Train the Trainer” certification. · Knowledge of MSHA regulations, inspections and investigations is preferred. · Bilingual skills are preferred. · Strong organizational skills and attention to detail · Valid Driver's License is required Salary Range: Salary will be based on experience. Company Benefits: Jobe Materials provides competitive and generous benefits for its salaried employees. The company provides a 401(K) retirement plan with an employer match component. Jobe Materials prioritizes the health of its employees, and its health insurance benefits for its employees reflect that. A company cell phone and other necessary technology devices will be provided. Additional benefits would be discussed with candidates during the interview process. Equal Opportunity Employer: Jobe Materials is an equal opportunity employer. Jobe Materials shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. Applicants may apply using websites where this job posting is listed. Please send your resume with cover letter and references, salary requirements, and safety policy writing samples to: Garrett J. Yancey, General Counsel, at ******************.

Development Assistant - Aviation Development Company: Ascend Aviation Services (a wholly owned subsidiary of Sky Harbour Group) Compensation: $95,000-$110,000 annually Ascend Aviation Services is seeking a Development Assistant to support aviation development projects during the pre-construction phase. This role will assist senior development leadership in managing site evaluation, entitlements, permitting, and regulatory coordination for aviation facilities. The Development Assistant will gain hands-on exposure to FAA regulations, municipal approvals, and aviation-specific development processes while supporting multiple projects from early concept through readiness for construction. This position is ideal for a development or pre-construction professional with foundational experience in aviation, infrastructure, or complex commercial development who is looking to grow into a senior role. Key Responsibilities Support due diligence efforts such as ALTA surveys, geotechnical investigations, environmental reviews (Phase I/II), airspace analyses. pre-construction activities from initial site evaluation through entitlement and permitting. Maintain entitlement and permitting matrices across multiple jurisdictions and projects. Assist with zoning, land use, and entitlement documentation and tracking. Coordinate with municipalities, airport authorities, and state/federal agencies under the direction of senior development leadership. Assist in ensuring compliance with FAA regulations, airport authority requirements, and aviation development standards. Support coordination with architects, engineers, consultants, and internal stakeholders during planning and design development. Assist with document control and version management for drawings, reports, and regulatory submissions; help develop and maintain pre-construction schedules, budgets, and milestone deliverables. Support development leadership with data analysis, market research, and site benchmarking as needed. Track permitting timelines and identify potential risks or delays for escalation to senior leadership. Prepare meeting materials, regulatory submissions, and project documentation. Support the transition of projects to the Project Management team once construction is authorized. Contribute to continuous improvement of development and entitlement processes, templates, and best practices. Qualifications Bachelor's degree in Construction Management, Engineering, Architecture, Aviation Management, Planning, or a related field. 3+ years of experience in development, pre-construction, construction management, or infrastructure-related roles. Working knowledge of entitlement processes, permitting, zoning, or regulatory approvals (aviation experience preferred but not required). Familiarity with aviation-specific planning concepts such as ALP coordination, Part 77 airspace, and airport minimum standards, FAA regulations, airport authority requirements, or public-agency coordination is a plus. Exposure to aviation or infrastructure projects such as hangars, terminals, maintenance facilities, or industrial developments is preferred. Ability to read and interpret site plans, civil drawings, architectural drawings, and zoning codes. Strong analytical and problem-solving skills with attention to detail. Strong written and verbal communication skills. High level of organization with the ability to manage multiple tasks and deadlines in a fast-paced, multi-project development environment. Detail-oriented, proactive, and eager to learn complex regulatory and development processes within aviation development or project management Proficient in Microsoft Office; experience with project tracking or scheduling tools is a plus.

Job: Quality Control & Operational Excellence Manager Reports to: Operations Director About Us National Wire LLC is a leading welded wire manufacturer based in Conroe, Texas. With a commitment to product quality, customer satisfaction, and operational efficiency, we are seeking a Quality Control & Operational Excellence Manager to lead our efforts in driving continuous improvement and maintaining compliance with industry standards. Position Summary To lead and sustain a culture of quality and continuous improvement by ensuring consistent product excellence and driving operational efficiency through innovative methodologies, in alignment with the company's strategic objectives and industry best practices. Key Accountabilities Quality Management System: Lead the development, implementation, and continuous improvement of the QMS. ISO 9001: Ensure annual certification. Compliance: Ensure appropriate customer and government compliance (regulatory). Strategic Aligning: Responsible for supporting CEOs' efforts to develop and execute the implementation of the strategic alignment process. Company Values: Responsible for conducting his/her day-to-day actions by using National Wire's Values. Continuous Improvement: Lead and implement methodologies, techniques, and systems to enable the company's continuous improvement capabilities, including training and coaching Leadership: Build and lead a high-performing team of QC and Operational Excellence professionals, ensuring effective resource allocation, performance management, and professional development. Knowledge and Skills Required Education: Bachelor's degree in Engineering, Industrial Engineering, or a related technical field (MUST). Master's degree or certifications in Quality Management, Lean, or Six Sigma (Preferred) Experience: 7+ years of progressive experience in quality control, operations, or continuous improvement, with a strong background in manufacturing or industrial environments. Leadership: 5 years in a managerial or leadership position, leading quality assurance teams and operational excellence initiatives across multiple departments. Experience training and coaching personnel at all levels on quality and operational standards. Technology: Working knowledge of Microsoft Office and ERP applications. Languages: Bilingual English Spanish (MUST) Physical requirements: Able to stand long periods of time and travel occasionally within US. Why Join Us At National Wire, you won't just be filling a role-you'll be shaping the future of our operations. We're a fast-growing company where your ideas and leadership will directly impact performance, quality, and long-term success. You'll have the opportunity to work alongside senior leadership, lead strategic initiatives, and be part of a company culture that values innovation, ownership, and excellence in execution. We offer a stable, growth-oriented work environment where continuous improvement isn't just encouraged-it's expected. If you're looking to lead with purpose and drive real results, this is the place for you.

FLSA Status: Exempt Acme Brick Company (a Berkshire Hathaway Company) has been operating for 130 years in 13 states in the south central/south eastern United States. Our vision is to be THE trusted materials solution for enduring beauty, safety, and strength in building communities. Our associates are our greatest asset, and we strive to be a great place to work every day. Summary We are currently seeking an Inside Sales Representative with excellent organization skills and a personable disposition. The ideal candidate has a natural ability to roll with the punches, being flexible to handle anything that might come their way. You'll be a strong and reliable support to company operations, maintaining procedures, communication and customer service. Not only will your efforts allow us to achieve organizational efficiency, you will nurture the pleasant work environment our people love. Essential Duties and Responsibilities (other duties may be assigned) This is a safety sensitive position. · Inside showroom product sales but also work with outside sales teams to assist their customers when visiting the showroom · Compiles lists of prospective customers for use as sales leads, based on information from business directories; industry ads; trade shows; internet web sites; and other sources. · Displays or demonstrates product, using samples, catalog, website and emphasizes sellable features. · Quotes prices and credit terms and prepares sales contracts for orders. · Responsible for credit and collections regarding sales orders. · Estimates date of delivery to the customer, based on knowledge of own firm's production and delivery schedules. · Tracks stock levels. · Enters new customer data and other sales data for current customers into computer database. · Use of CRM tools to log and document opportunities and customer interactions · Investigates and resolves customer delivery issues. · Attends trade shows and other networking events as necessary Skills and Experience Required for Success · Ability to find solutions for customer and make recommendations to meet their needs · Demonstrated prioritization/time management skills · Self-motivation · Must have excellent verbal and written skills · Must be proficient in Microsoft Office · Must have a reliable means of transportation Competencies Required for Success · Integrity · Stays current with industry and market information that may reveal sales opportunities · Initiative · Flexibility · Customer Service Orientation · Analytical Thinking Education · Bachelor's degree preferred or one to two years related experience and/or training; or equivalent combination of education and experience We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Is this your next job Read the full description below to find out, and do not hesitate to make an application. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with Planner Scheduler to optimize preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Updates records and reviews CMMS history and analyzes data. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Experience in vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ( ) ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. xevrcyc Revisión de la política de privacidad aquí here. ( )

For our state-of-the art 600+ person Lubbock, TX cheese and whey manufacturing facility, Leprino is seeking a Controls Technician. Leprino Foods broke ground on the $1 billion facility in the summer of 2022. The plant will become operational in 2025 with Phase 1 and will become fully operational by 2026! This position pays $39 per hour. There is an additional $1 differential for hours worked between 6pm and 6am. Weekly pay. Summary Description: The Industrial Electrical/Controls Technician provides plant-wide support for the selection, installation, programming, documentation, training and knowledge of plant industrial controls, including computer integration of PLC's, HMI's and process controls within the facility, training of end users on the operations of newly installed or modified process or control systems, and for standardization of control systems and control logic designs, documentation of operational procedures and as-built electrical drawings and logic. The Industrial electrical/Controls Technician is also the plant liaison for new system start up and commissioning by outside electrical and controls contractors and system integrators to ensure proper transfer of electrical red lines or updated electrical drawings and documented PLC programs changes and adequate training on the installation/changes that have been completed. The ICT is also responsible to keep control panels up to date and help rebuild when needed. The Electrical portion includes, designing, implementing electrical changes or additions to the electrical infrastructure. It is also the objective to oversee the contracted work to assure it is designed and installed per LFC guidelines. This position is also responsible to update the systems I/O list and create them if missing from the Document library. Job Duties (Accountability Categories and Essential Functions/Key Responsibilities): NOTE: The job may include other “non-essential” responsibilities and duties that are not listed on this form. Implementation of Control Systems Owns, drives, and has full accountability for designing and implementing new control systems and equipment on capital projects with the input from the engineering team. Oversees outside system integrators and controls contractors in their work within the facility. Ensures that all projects are documented, and information is available for use by all maintenance and production employees. Ensures work is accomplished in a safe and sanitary manner by directing employees and contractors and monitoring adherence to Company policies. Control System Maintenance & Inspection Has accountability for supporting server-based solutions and/or network infrastructure to maximize effectiveness of the plant's investment in shared computing resources, including effective deployment and utilization of servers (standalone and clustered), thin clients/terminal services, structured cabling, routers, switches, and network This more in the controls system side of our network. Asset-Center, Wonderware etc. Performs, provides details for, and inspects repairs to control and instrumentation systems to prevent downtime and ensure compliance with plant standards and governmental regulations. Determines necessary quantities of spare controls and instrumentation parts and supplies for all plant equipment. Ensure all Control systems, PLC and MCC have a current I/O List. Training and Documentation Ensures that appropriate training and documentation is available for use in proper training of Maintenance and Operations personnel. Coordinates, champions, and provides training and development for Maintenance Technicians to upgrade their controls skill levels. Accountable for maintaining appropriate records and files pertaining to plant maintenance activities to ensure availability of information regarding machine and facilities requirements. Problem-solving & Troubleshooting Acts as resource to production and maintenance teams, in problem solving and troubleshooting, operational activities to reduce downtime related to electrical and control problems. Integrates LEPRINO QUALITY into all aspects of the Allendale plant as evidenced by demonstrated continuous improvement, teamwork with co-workers, distinguished customer service and striving for excellence. Qualifications & Experience: Knowledge and Skills Knowledge of plant controls systems including PLCs and industrial automation software such as Wonderware. Proficient in the Microsoft Office Suite programs. Familiar with industrial operations, preferably dairy or food manufacturing. Effective oral and written communication skills. Excellent organizational skills. Creative thinker with a process improvement mindset. Demonstrated experience achieving high levels of customer service with cross-functional teams. Education and Experience Minimum of two-year electrical/electronic technical degree or five years demonstrated experience in industrial controls system development and troubleshooting. Or aptitude to go to classes to augment either. Strong knowledge of maintenance industry best practices. Practical experience leading loss control efforts in general industry. Offering you in return: A chance to be part of a global team of individuals passionate about producing and delivering high-quality products that help feed and nourish families around the world. Leprino Foods could not be where it is today without our incredible employees. That is why we share in our success together by rewarding you for your hard work. Hiring great people who are in it for the long run is our goal. Through competitive salaries, tuition assistance, vacation, holiday, dedicated sick time, matching 401(k), annual merit increases and bonuses, as well as our annual Profit-Sharing plan. Your impact will be noticed and rewarded, as you seek to further our company, our customers, and one another. Our Story: Leprino Foods' history dates back over 65 years, when Jim Leprino first started making small batches of mozzarella for local markets and eateries in the Little Italy neighborhood of Denver. We've grown a bit since then. Today, Leprino is the world's largest manufacturer of mozzarella and lactose, and a leading producer of whey protein. Still owned by Jim and the Leprino family, our sights are set to be the “World's Best Dairy Food and Ingredient Company.” To help us achieve that bold vision, we're looking for our secret ingredient: You. A motivated team member who is the best at what you do. Three people in a small corner grocery store in the early 1950s have now grown to over 4,300 employees throughout 16 global locations. Will you join us on our journey? Leprino Foods Company utilizes the services of Psychemedics to perform our Hair Follicle Drug Testing. Additional information about this process can be obtained at ******************** Leprino Foods Company supports a drug-free workplace and is an EEO/Affirmative Action Employer - M/F/Disability/Veteran Leprino Foods requires all individuals to wear the appropriate Personal Protection Equipment (PPE) as required by the role and location At Leprino, we believe in equal employment opportunity and make employment decisions based on each individual's unique talents, experience, skills, and knowledge; we do not discriminate on the basis of any personal characteristics. We know we are better together and are committed to creating an inclusive and supportive culture in which all employees can thrive. Nearest Major Market: Lubbock

An opportunity has arisen for a Plant Manager based in Hereford, Texas. This role will manage the day-to-day operation of the Westway Feed Products bulk liquid feed facility to maximize efficiency, safety, and profitability. This role will ensure that all orders are handled effectively and in line with customer's needs. Working within our highly diverse business you will have the opportunity to make a real impact working on a range of regional and global projects, support on the day-to- day management of Plant issues. Westway Feed Products is North America's largest manufacturer of liquid supplements for livestock. Additionally, we produce feed mill products, dried molasses and industrial products. The core concept of Westway's business is to utilize co-products from other industries and convert them into safe, high-quality, cost effective, livestock feed supplements. While Westway's primary ingredient for many of our products is molasses, we also incorporate other co-products. The concept of utilizing these co-products is the foundation of our sustainability platform. Today, Westway operates 22 production facilities across the United States, Canada and Mexico. Our geographic reach allows for products to be developed according to environmental and production system variations across the country. We are part of ED&F Man Commodities, a world leading trader of agricultural products including coffee, sugar, molasses and animal feed. Responsibilities to include, but are not limited to: Directly supervises and coordinates the activities of the plant employees. Leads recruitment, training & development, performance and compensation management, time-off/leave policies and discipline for employees Coordination of production and goods receiving, ensuring customer orders are fulfilled correctly. Makes recommendations for improvements regarding the efficiency of the plant operations. Planning and coordinating customer service activities for the plant. Enforcing company policies and procedures to promote and ensure a safe and environmentally responsible workplace, assisting with safety meetings and inspections. Ensures all production is carried out as per company polices and regulations, including ensuring appropriate product mixing and blending are followed. Coordinating the logistics and movement of product to customers. Planning, development and completion of record keeping programs. Assist with plant audits and completes special projects as requested by management. Interacts and communicates with colleagues and employees in a professional and appropriate manner, working to generate respect and encouraging active learning. Takes the initiative to identify problems, uses judgment to find appropriate solutions and follows through to resolution in a timely manner. Skills and Expertise: To perform the duties of this position successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below outline the knowledge, skills, abilities and competencies that are required in this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. 7+ years of manufacturing experience required ideally from agriculture, bulk liquids, chemicals, fertilizers, terminal operations or food manufacturing. Educated to Bachelor's degree level is highly preferred. Experience with the broad, multi-mode bulk liquid handling including truck, shipping and rail. Good general engineering and maintenance knowledge of equipment including steam boilers, compressors, loading racks, product blenders and automation systems. Previous experience launching continuous improvement initiatives is desirable, with a yellow or green belt certificate highly desirable. Strong computer skills and familiarity with truck, bulk and inventory programs, alongside MS windows applications and plant automation software. Demonstrated knowledge of the principles and techniques used in planning, budgeting, reporting and staffing. Ability to work effectively with others, has strong interpersonal and negotiation skills. Effective communication, verbally and in writing, and good presentation skills at all levels of the organization. Ability to resolve and overcome issues, problems and roadblocks to meet objectives. We recognise that talent comes in many forms, and we value potential just as much as experience. If this role excites you but you don't meet every requirement, we still encourage you to apply. Our Offer We provide a fast-paced, stimulating and truly global environment, which will stretch your abilities and channel your talents. We also offer competitive salary and benefits combined with outstanding career development opportunities in one of the global leaders in soft commodity trading. Our Westway Values Integrity, Accountability, Teamwork, Passion for Service, Business insight Westway's values guide our pursuit of providing a safe and rewarding environment for our employees while helping our customers to thrive. Our Commitment We share the commitment of our parent company, ED&F Man Commodities. We are committed to creating and sustaining an inclusive and diverse work environment where all employees are treated with dignity and respect. We are committed to promoting equal opportunities in employment and are focussed on actively building and developing diverse teams. All qualified applicants will receive equal treatment without regard to race, colour, sex, gender, age, religion or belief, ethnic or national origin, marital or civil partner status, physical or mental disability, military or veteran status, sexual orientation, gender reassignment (identity, gender expression), genetic information or any characteristic protected by local law. We are willing to make any reasonable adjustments throughout our recruitment process. To apply you must have the right to work for the provided location.

Job Title: HSE Coordinator Department: Administration Reports To: HR Manager National Wire is a family-owned and operated welded wire manufacturing business since 1995 and continues to constantly grow its product lines and customer service. We are the largest single locality of welded wire manufacturers in the southern United States of America. We strive to meet our customers' needs by exceeding every expectation of every aspect of quality and service. Our priority is always continuous customer satisfaction. We pride ourselves on high standards of operation and service excellence through technical innovations and improved processes based on ASTM standards. Position Overview The Safety Coordinator is responsible for supporting, developing, and overseeing safety programs throughout the company. This role ensures compliance with OSHA regulations and internal policies, conducts workplace audits and investigations, and collaborates with departments to maintain a safe and compliant work environment. The Safety Coordinator will also provide training, maintain documentation, and support initiatives that promote a strong safety culture. Key Responsibilities Provide hands-on support to departmental leadership to ensure compliance with OSHA-required signage, housekeeping, lockout/tagout procedures (LOTO), and overall safety protocols. Conduct accident, injury, and incident investigations, including near-miss reporting. Maintain all OSHA-required logs and documentation. Perform workplace hazard assessments and safety audits as needed. Coordinate and support OSHA inspections. Review and complete Job Hazard Analyses (JHAs). Develop and deliver training programs for new hires, including Safety Orientation, Onboarding, and Departmental Safety Training. Conduct periodic audits to verify that employees are following proper safety procedures at the job site. Lead monthly Safety Committee meetings and follow up on action items. Collaborate with supervisors, managers, maintenance, and production teams to improve safety practices. Communicate effectively at all levels of the organization to strengthen safety awareness. Maintain all safety documentation, including training records, incident reports, and corrective action logs. Support continuous improvement of safety policies and procedures. Qualifications Bachelor's degree preferred, or equivalent experience in a safety-related role. 3+ years of experience in safety coordination, preferably in manufacturing or industrial settings. Strong understanding of OSHA standards and safety compliance. Experience handling workplace injuries and incident investigations. Experience working with OSHA on site is preferred. Ability to conduct safety audits, trainings, and orientations. Strong communication skills, able to interact effectively at all levels of the company. Proficient in Microsoft Office (Word, Excel, PowerPoint). Bilingual English/Spanish required. Physical Requirements Walks production floor regularly. Climbs stairs and ladders. Stands or walks for extended periods. Occasional lifting up to 40 lbs. Salary: Based on experience. Benefits: Dental, health, and vision insurance and paid time off. National Wire LLC is an equal opportunity employer and participates in the E-Verify program. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Is this your next job Read the full description below to find out, and do not hesitate to make an application. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with Planner Scheduler to optimize preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Updates records and reviews CMMS history and analyzes data. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Experience in vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ( ) ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. xevrcyc Revisión de la política de privacidad aquí here. ( )

Job Description Knapheide Truck Equipment Center in Willis, TX is looking to hire a Part-Time Driver. This position averages 10 - 20 hours per week, working as needed Monday - Friday. Reasons to work with us: Stability - We've been in business since 1848 Growth opportunities - Over 25 retail stores and upfit centers, and continued expansion Never Settle - We're committed to adapt, overcome, and continuously improve Collaborative, supportive, and engaging work environments North America's most popular manufacturer of work truck bodies and truck beds What you'll be doing: Work directly with the Office Manager to schedule the delivery of vehicles and equipment to customer locations in a timely, safe, and courteous manner Manage driver logs and complete pre-trip inspections Experience you'll need: High School Diploma or GED Equivalent Valid Driver's License Driving Record with no major violations within the last three years and no more than two moving violations within the last three years If you're someone who takes pride in the work you do, you never settle for second best, and you're looking for a jumpstart on a new career; apply today!

Job ID 2025-13402 # of Openings 1 Category Project Management Benefit Type Salaried High Fringe/Full-Time LMI seeks a skilled Deployment Manager responsible for assisting Customs and Border Protection (CBP), US Border Patrol (USBP) to execute its tactical infrastructure construction, maintenance, and repair program, which generally consists of the life cycle planning and execution of construction, maintenance and repair along the borders of the United States. This position will support the deployment of the Program Management Office Directorate (PMOD) Subterranean Portfolio Linear Ground Detection System (LGDS) program at remote border locations. Join our team of collaborative self-starters focused on delivering practical and efficient solutions to help our client keep U.S. borders safe and facilitate trade and travel. As part of our high-performing team, you will augment our vital work to provide "eyes and ears" technology to protect our nation. Position is remote with approximately 50% CONUS travel required. LMI is a new breed of digital solutions provider dedicated to accelerating government impact with innovation and speed. Investing in technology and prototypes ahead of need, LMI brings commercial-grade platforms and mission-ready AI to federal agencies at commercial speed. Leveraging our mission-ready technology and solutions, proven expertise in federal deployment, and strategic relationships, we enhance outcomes for the government, efficiently and effectively. With a focus on agility and collaboration, LMI serves the defense, space, healthcare, and energy sectors-helping agencies navigate complexity and outpace change. Headquartered in Tysons, Virginia, LMI is committed to delivering impactful results that strengthen missions and drive lasting value. Responsibilities You will serve as a deployment manager for the client's linear technology. You will facilitate the clients technology construction deployments by: Serving as agency representative for assigned project(s), responsible for a successful execution of the LGDS Program Being responsible for successful project execution including management of scope, schedule, budget, risk, and contractor performance Being responsible for ensuring timely elevation of project issues through the Planning and Project Execution Team for resolution Identifying, evaluating, and mitigating risks, issues, and opportunities for assigned project(s) Serving as the project expert and spokesperson for the project(s) with responsibility to present, explain, and defend program management issues and directions to higher-level official in CBP, DHS, and other government agencies and interested public groups as requested by the Program Manager. Collaborating with the U.S. Army Corps of Engineers (USACE), Federal Aviation Agency (FAA), Engineering, Business Management, key stakeholders, and other offices throughout the project life cycles Coordinating all project related outreach efforts Qualifications Background Investigation: Active U.S. Customs and Border Protection background investigation required. Education & Experience: Master's degree in business, management, finance, or information management with 10+ years of experience, or Bachelor's degree with 12+ years of experience, or High School diploma with 25+ years of relevant experience. Experience in: Deploying technology systems and construction management, remote sensor maintenance and/or repair, and/or Civil/site design. Experienced leader with: 3-5 years in a related team-lead role with 1-2 years in a leadership or supervisory capacity. Technical Knowledge: Knowledge of MD-102. Understanding of NEPA and federal real estate clearance process. Engineering and project management for DHS or DoD in communications and sensor technology. Technical Proficiency with Microsoft Word, Excel, Outlook, PowerPoint, and SharePoint. Excellent Communication & Problem-Solving skills with the ability to make informed decisions. Strong organizational Skills with the ability to manage multiple tasks and prioritize effectively. Experienced in managing multiple projects with independent schedules and budgets. Travel: Willingness to travel approximately 50% of the time. LMI is an Equal Opportunity Employer. LMI is committed to the fair treatment of all and to our policy of providing applicants and employees with equal employment opportunities. LMI recruits, hires, trains, and promotes people without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, disability, age, protected veteran status, citizenship status, genetic information, or any other characteristic protected by applicable federal, state, or local law. If you are a person with a disability needing assistance with the application process, please contact Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Need help finding the right job? We can recommend jobs specifically for you! Click here to get started.

Job DescriptionGENERAL DESCRIPTION: Performs all repair process inspections to ensure compliance with requirements Performs incoming inspection of all raw materials/components/castings received prior to release to the facility Practice and ensure good shop safety practices Monitor and respect tool and equipment calibration Input production data into ERP system Performs Non-Destructive testing, including ultrasonic, dye penetrant, visual and mag particle Perform other duties as assigned. QUALIFICATIONS: High school diploma or GED 2-4 years of NDT Quality Inspection experience working in the combustion turbine repair industry 2 year technical school with Certification in SNT-TC-1 A ADA JOB REQUIREMENTS: Reasonable accommodations will be made to ensure that the essential functions of the job can be performed and not hinder the employee's performance due to physical, mental, or emotional disability. EQUAL EMPLOYMENT OPPORTUNITY: Allied Power Group is an equal opportunity workplace. All employment decisions are made without regard to sex, race, color, religion, national origin, citizenship, age, disability, marital or veteran status, sexual orientation, gender identity or expression, or any other legally protected categories. This includes providing reasonable accommodation if requested for disabilities or religious beliefs and practices.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. Identifies and sources parts, supplies and repair items as necessary. Independently performs maintenance as per industry standards. May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Complies with 5S and housekeeping standards. Drives and participates in CI activities - processes, results and cost savings. Updates records and reviews CMMS history. Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. Utilizes predictive maintenance technologies to collect equipment performance data. Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. Completes on-the-job and technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. Must be able to use basic hand tools and specialized tools as appropriate May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.