American Welding & Gas jobs in Lexington, KY

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Gainesville Employment Status: Hourly Full-Time Function: Supply Management/Purchasing Pay Range: ($33,639.00 - $50,458.00) Target Bonus: % Req ID: 27317 Summary Responsible for pulling, weighing, preparing and completing documentation for customer orders which are to be delivered by commercial trucker. Load/unload truck shipments. Warehouse received material and finished product in proper location. Support other departments to retrieve and replace inaccessible stock as needed. Key Deliverables Correctly pulled/boxed/prepared customer orders Work environment cleanliness, and organization No safety incidents or accidents Well maintained packaging and shipping supplies Key Accountability Metrics Satisfactory ISO and QC audits Monthly Customer Complaint Report Performance appraisals Key Responsibilities and Essential Functions 20% Pick and Pack Customer Orders Picks orders which are to be delivered by commercial trucker based on customer order and completes required documentation. Prepares pulled orders and places in holding area for truck pick up. 40% Load/Unload Shipments - Warehouse Material and Product Loads and unloads truck shipments received through Distribution. Follows proper procedure to handle deliveries in order to facilitate entry into Harris inventory system. Warehouses received materials and finished product in proper Manufacturing or Distribution areas, recording location on appropriate documentation. 20%Other Departments Support Aids other departments by pulling and replacing inaccessible stock using forklift. 5% Follow Safety Regulations Works safely and supports safety within their team across the organization - as required. Participates in safety training and demonstrates a high regard for safety at all times. Wears PPE as required by safety regulations. 5% Maintain Quality Maintains quality by verifying that pulled product, packaged or not, meets Deliveries requirements and work procedures. 5% Complete Documentation Completes the following forms/reports as required by department procedures: • Deliveries • Returned Goods Authorization • Daily 5S Check Sheet • Daily Forklift Inspection • Packaging/Shipping Supplies Checklist • Packing List on incoming shipments 5% Support Department and Company Initiatives Works on cost saving projects, Six Sigma projects, and provides support for other team members and projects. Attends team meetings. Utilizes lean tools and techniques such as 5S and visual factory concepts in maintaining order and cleanliness. Performs additional tasks to support production as needed or directed by supervisor or management. Education and/or Experience Required - 2 or more years of related work experience and High school diploma or GED or equivalent combination of education and experience. Preferred - Experience related to distribution; some computer knowledge; forklift license. Core Competencies Required from Employees Maintains a Customer Focus - Demonstrating exceptional service to both internal and external customers giving high priority to understanding and satisfying the customer. Takes Ownership - Demonstrates a continuous drive to achieve superior results and takes responsibility for those results. Is a Team Player - Has the ability to collaborate effectively with others to achieve common goals. Recognizes situations in which team members need to work together to solve work tasks at hand. Uses Sound Judgment / Integrity - Takes action that is well-reasoned, which represents the best interest of the business. Achieves Quality Results - Flawlessly executes on objectives to ensure the long- term success of the organization. Key Knowledge, Skills, Abilities, and Qualities Required Qualities and Skills Initiative, flexibility, responsibility and independence, ability to multi-task, goal-oriented, teamwork, excellent communication skills, ability to handle projects of varying scope, attention to detail, respectful of others, and willing to share expertise with others. Language Skills Ability to read and interpret documents such as safety rules, specific customer requirements, procedures. Ability to communicate effectively with coworkers Mathematical Skills Ability to work with basic mathematical concepts. Reasoning Ability Ability to define problems collects data, establish facts, and draw valid conclusions. Ability to interpret technical instructions. Physical Demands of Position - See Physical Demands Form Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Our Team is Kind of a Big Deal! UniFirst First Aid + Safety is seeking a reliable and hardworking Professional Sales Person to join our family. As a Team Partner in the Sales Department, you will be developing new business for UniFirst First Aid retail marketing through high-level selling skills. When working with UniFirst First Aid + Safety we provide a variety of shifts. Our standard is a 5-day work week, enjoy two days off a week. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you? Training: Our Team Partners receive ongoing cross-training, exposing them to different department areas. Cross training enhances their performance and assists them with their career potential and advancement. Work Life Balance: We offer up to 40-hours a week! Career Growth: Some companies like to promote from within, we love to! Culture: Our family culture is what makes UniFirst First Aid + Safety an organization that stands out from the rest. Diversity: At UniFirst First Aid + Safety, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Sell and promote First Aid products to new accounts with 75 employees or more and/or multiple locations. Develop new business and penetrate accounts further to sell additional lines with the priority as first aid, facility services, and safety products. Meet new customer needs with products that will help provide a safe, pleasant, and productive workplace. Lead 411 as another tool to grow your prospect hopper. Organize and implement a “work plan' for maximizing daily sales and decreasing mileage between calls. Maintain a call average that is consistent with current company objectives. Promote growth by continuously setting appointments, making cold calls, and gaining referrals for new business. Participate and execute information provided from sales meetings. Submit work orders, paperwork and expense reports as required. Keep paper-flow consistent by ensuring accuracy. Communicate with the local Sales Manager, Territory Manager and the Regional Sales Manager with all pertinent information for any new accounts. Keep abreast of all price changes and sell accordingly. Maintain a prospect database of all accounts being developed. Participate in periodic promotions. Ensure that personal vehicle used for company business is clean, organized, and properly maintained. Adhere to company policies as outlined in the UniFirst Employee handbook and the Green Guard Field Manual. Keep up to date about competitive companies, their products, and prices. Share pertinent information about pricing and products with other employees during sales meetings. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED equivalent is required. Must be 18 years of age or older. Valid driver's license and safe driving record are required. Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards. Two years of business to business selling experience is required. High-level selling skill including strong prospecting and closing skills. Knowledge and exceptional sales experience. Ability to be resourceful. Ability to lift up to 30 lbs. Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards About UniFirst First Aid + Safety UniFirst First Aid + Safety is a division of the UniFirst Corporation. UniFirst First Aid + Safety is one of the largest providers of First Aid, AEDs, Compliance Training, Safety and PPE products in the United States. Businesses such as manufacturing, office buildings, retail, construction, logistics, automotive, and government agencies, are just a few examples of our current customer base. We are part of a $70 million division within a $1.8 billion company. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Our Team is Kind of a Big Deal! UniFirst First Aid + Safety is seeking a reliable and hardworking Territory Manager to join our family. As a Territory Manager, you will be responsible for servicing and managing relationships with customers. When working with UniFirst First Aid + Safety we provide a variety of shifts. Our standard is a 5-day work week, enjoy two days off a week. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you? Training: Our Team Partners receive ongoing cross-training, exposing them to different department areas. Cross training enhances their performance and assists them with their career potential and advancement. Work Life Balance: We offer up to 40-hours a week! Career Growth: Some companies like to promote from within, we love to! Culture: Our family culture is what makes UniFirst First Aid + Safety an organization that stands out from the rest. Diversity: At UniFirst First Aid + Safety, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: • Provide consistent and timely service to customers in your territory. • Service 10-15 customers per day in a company vehicle. • Accommodate a customer's needs with products that will help provide a safe, pleasant, and productive workplace. • Organize and implement a “work plan” for maximizing daily sales and decreasing mileage between calls. • Maintain an adequate supply of promotional materials, flyers, and business cards. • Maintain a call average that is consistent with current company objectives. • Maintain and turn in paperwork in a timely manner. • Mail or email work orders, call reports, and vehicle maintenance reports as required. • Keep handheld computer data updated and in compliance with company policy. • Keep abreast of all price changes and sell accordingly. • Maintain a consistent paper flow by avoiding errors on paperwork submitted. • Maintain adequate vehicle stock and rotate accordingly. • Adhere to the company vehicle maintenance schedule and policy. • Understand and comply with all company policies. • Have proper tools and supplies such as; anchors screws, screwdriver(s) Hammer and a charged drill on van in order to install equipment within a customer's facility. • Maintain a clean company vehicle inside and out to promote a good company image. • Manage your geographical territory and notify management of any territory problems. • Promote growth by continuously making cold calls and developing new businesses. • Keep up to date about competitive companies, their products and prices • Continuously gain knowledge of First Aid + Safety products. • Share pertinent information about pricing and products with other employees during sales meetings. Qualifications What we're looking for: • Must be at least 21 years or older. • Valid non-commercial driver's license and safe driving record is required. • 1-3 years of B2B sales experience or equivalent is preferred. • Must be knowledgeable in basic computer and tablet skills and be proficient with Microsoft Word and Excel. • Ability to lift and carry up to 40 lbs. About UniFirst First Aid + Safety UniFirst First Aid + Safety is a division of the UniFirst Corporation. UniFirst First Aid + Safety is one of the largest providers of First Aid, AEDs, Compliance Training, Safety and PPE products in the United States. Businesses such as manufacturing, office buildings, retail, construction, logistics, automotive, and government agencies, are just a few examples of our current customer base. We are part of a $70 million division within a $1.8 billion company. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Gainesville Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($36,330.00 - $54,495.00) Target Bonus: % Req ID: 27331 Education and/or Experience Required - Machining knowledge. 2 or more years of related work experience and High school diploma or GED or equivalent combination of education and experience. Must possess basic computer skills and ability. Preferred - Associate's Degree in Technical Studies. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

At KARL STORZ, we are driven by a mission to enhance global health through innovative technology designed to tackle the most complex surgical procedures and medical challenges. One of the most rewarding ways to launch your career with us is by joining our Onsite Endoscopic Specialist (OES) team. In this role, you will be at the forefront of healthcare innovation, providing hands-on support for KARL STORZ advanced medical devices-ranging from hand instruments to state-of-the-art video equipment-within your assigned hospital. As an OES, you will collaborate closely with the Sterile Processing Departments and Operating Room teams, playing a critical role in ensuring the success of surgical procedures. This position is more than just a job-it is a gateway to an exciting and diverse career path. Whether you aspire to transition into medical device sales, advance into leadership, share your knowledge as an educator, or specialize in marketing, the opportunities for growth within KARL STORZ are limitless. With a commitment to internal development, we empower you to explore your passions, develop your skills, and propel your career to new heights. Join us and be part of a team dedicated to making a tangible impact on global health! Key Responsibilities: Face-to-face customer support, including OR, SPD and Biomed Video tower/system set-up and support Inspection, repair, troubleshooting and replacement of KARL STORZ devices Monitoring, reporting, and facilitating repair/ exchange transactions Transporting, cleaning/sterilization and packaging of instruments after use Trouble shoot video and instrument issues in the O.R. Instrument/equipment repair management Requirements: A minimum of high school diploma or equivalent Experience in Sterile Processing, Sales, or other Surgical Technology/Medical role Our successful candidate will have excellent written and spoken English language business communication skills. They will also have demonstrated success working in a collaborative, service-oriented team environment. Effective communicator, collaborative, and effective time management Possess exceptional organizational skills and the ability to multi-task MS Office - proficient user as the role will need to work with Excel spreadsheets and reporting Role requires the completion of a drug screening for safety-sensitive positions Must be able to lift/push/pull up to 25lbs Preferred Qualifications: Associate's Degree and/or CRCST certification Key attributes of an exceptional OES: Collaboration: Build strong, respectful relationships with team members, fostering an inclusive work environment and driving process improvements. Critical Thinking & Problem Solving: Analyze situations to understand the "why" and "how," delivering solutions with professionalism. Communication: Engage in clear, concise interactions with customers and colleagues, effectively conveying ideas and information. Customer Service: Create an environment where customers feel valued, respected, and understood, building lasting business relationships. Technical Proficiency: Utilize email, calendars, virtual collaboration tools, and spreadsheets to manage tasks, analyze data, and support business decisions. What is in it for you: Relocation Support: Enjoy generous relocation reimbursement packages to ease your transition. Professional Growth & Development: Receive financial support to obtain industry certifications (e.g., CST, CRCST). Get reimbursed for certification exam fees and study materials. Take advantage of ongoing training and educational opportunities to advance your career. Collaborative & Dynamic Work Environment: Engage in cross-functional collaboration and knowledge sharing. Benefit from regular feedback, recognition, and support for your growth and development. Be part of a team that celebrates successes together. Access to Cutting-Edge Medical Technologies: Work with state-of-the-art medical equipment. Collaborate with leading medical professionals. Contribute to innovative solutions that improve patient care. Who we are: KARL STORZ is an independent, family-owned company headquartered in Germany's renowned MedTech manufacturing region. For 80 years, we've pioneered the most groundbreaking innovations in endoscopic surgery, video imaging, and OR integration to benefit patients and healthcare providers alike. With more than 9,000 associates worldwide and 2,600 in the US, we pride ourselves on harnessing cutting-edge technology, precise workmanship, and unrivaled customer support to help healthcare facilities succeed. With onsite locations and field opportunities across the country, we attract a diverse and talented staff. It's not just about the tools we create-it's about the lives we change, together.

We are seeking a Process Technician to support operations at a single manufacturing site and across customer locations. This role is critical in ensuring smooth onboarding of new jobs, validating processes handed off by R\&D, and maintaining sustainable production practices. Additionally, the Process Technician will provide technical support to ensure products remain in spec, lead quality and efficiency improvements, and assist with new product development initiatives. The ideal candidate will be highly organized, detail-oriented, and skilled at translating technical requirements into practical, repeatable processes while responding quickly to production challenges. Why work at MCC: Competitive Compensation Generous benefits package including medical, dental, vision, disability, life insurance, and 401(k) Paid Holidays: New Year's, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating Holidays Key Responsibilities: Job Onboarding: Lead the introduction of new products or jobs into production, ensuring readiness and alignment with plant capabilities. Training & Support: Develop and deliver training for floor personnel on new processes, equipment, and best practices. Process Validation: Confirm that R\&D handoffs are feasible and sustainable for long-term production. Technical Support: Provide proactive and reactive support to operators, ensuring products remain in spec and resolving issues quickly. Documentation & Standards: Create and maintain detailed process documentation, SOPs, and quality standards. Trials & Testing: Plan and execute trials to validate processes, troubleshoot issues, and optimize performance; conduct lab evaluations and comparative analysis with competitive products. Continuous Improvement: Identify opportunities to streamline workflows and enhance efficiency in label manufacturing and related operations. Customer Interaction: Support customer and MCC-sponsored new product development projects; participate in coater trials and customer visits, occasionally requiring on-site work across shifts. Quality Oversight: Maintain lab/testing equipment and calibrations; initiate raw material complaints (SNAR), track corrective actions, and manage quality holds. Qualifications: Bachelor's degree in engineering or related field (or equivalent experience); 2- or 4-year degree or 2-4 years of related experience/training acceptable. Experience in manufacturing environments, preferably in labels or similar industries. Strong problem-solving skills and ability to manage multiple priorities. Math skills (including Algebra) and knowledge of printing/converting materials and technologies. Excellent communication and training skills; ability to write reports, business correspondence, and procedure manuals. Ability to travel for internal and customer visits and trials. Other Considerations: Occasional lifting of rolls/samples up to 40-45 lbs. Work around coating and slitting equipment; safety shoes may be required. Professional attire for customer visits; flexible hours for multi-shift coverage. #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Our Team is Kind of a Big Deal! UniFirst First Aid + Safety is seeking a reliable and hardworking Portable Fire Extinguisher Technician, “Fire Extinguisher Safety Specialist,” to join our family. As a Team Partner, your responsibilities will include conducting portable fire extinguisher and emergency/exit lighting inspection, service, repair, and maintenance, training team members in portable fire extinguisher and emergency/exit lighting inspection, service, repair, and maintenance. You will provide technical support to team members and help cover team members conducting inspections and service where, and as needed. The Partners role will also include selling and promoting fire services and products to help grow our existing customer base. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you? Training: Our Team Partners receive ongoing cross-training, exposing them to different department areas. Cross training enhances performance and assists with career potential and advancement. Work Life Balance: We offer up to 40-hours a week! Career Growth: Some companies like to promote from within, We love to! Culture: Our family culture is what makes UniFirst First Aid + Safety an organization that stands out from the rest. Diversity: At UniFirst First Aid + Safety, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Conduct portable fire extinguisher and emergency/exit lighting inspection, service, repair, and maintenance Train team members in various portable fire extinguisher and emergency/exit Lighting service and inspection related tasks Provide portable fire extinguisher and emergency/exit lighting technical support. Assist team members performing monthly and annual inspections on portable fire extinguishers and emergency/exit lighting to maintain compliance with NFPA 10 code when and where required. Assist team members Inspecting and test emergency egress lighting and exit signs when and where required. Providing customer onsite audits and quoting for fire service. Presenting and demonstrating our fire related products/services to customers and working with the service department to ensure customer satisfaction. Servicing, repairing and maintaining the portable fire equipment and emergency exit lighting systems of our established customer base where needed to cover team member vacations and time off. Provide fire services inspection software training to team members. Qualifications What we're looking for: High school and/or GED equivalent is required. Must be at least 18 years of age or older. Valid driver's license and safe driving record is required Must have an NFPA Extinguisher Certification/License Experienced performing monthly and annual inspections on portable fire extinguishers to maintain compliance with NFPA 10 code. Fire Extinguisher License or certification as required by state, county, and/or city. Ability to work independently with minimal supervision. Experienced in sales and upselling additional fire/safety-related products and services is highly preferred. Strong customer service skills. Ability to travel within the designated territory. Excellent communication skills for internal and external scheduling. Ability to lift up to 75lbs at certain times. About UniFirst First Aid + Safety UniFirst First Aid + Safety is a division of the UniFirst Corporation. UniFirst First Aid + Safety is one of the largest providers of First Aid, AEDs, Compliance Training, Safety and PPE products in the United States. Businesses such as manufacturing, office buildings, retail, construction, logistics, automotive, and government agencies, are just a few examples of our current customer base. We are part of a $70 million division within a $1.8 billion company. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

What you will do Under specific direction is responsible for the sale of Johnson Controls service offerings to owners, primarily at the Director level. Promote the Johnson Controls value proposition to building owners by providing technical solutions and operational expertise. Builds and manages long term customer relationships/partnerships with target and managed accounts. Responsible for customer satisfaction. Positions renewable service agreements as the foundation of managed account relationships. Performs the sales process to cultivate and manage long-term relationships and seeking out, qualifying and closing new sales opportunities. Obtain and close sales on a monthly basis. Seeks to expand the depth and breadth of Johnson Controls offerings within an account. How you will do it With direction from the supervising manager, sells the Johnson Controls offerings persuasively, persistently and confidently to building owners at the D-level while reaching optimal profit levels. Focuses on improving the existing building to allow the building owner to achieve business objectives. Manages ongoing, opportunities particularly focusing on selling services and retrofits. Sells, renews and expands renewable service agreements, including multi-year agreements, to both new and existing customers. Builds partnering relationships with the owner or owner representatives responsible for the decision-making process to drive the sale of Johnson Controls service offerings. Actively listens, probes and identifies concerns. Understands the customer's business and speaks their language. What we look for Required Bachelor's degree in business, engineering, or related team required. A minimum of six (6) years of progressive field sales experience. At least one year successfully selling HVAC or building automation system service or projects. Demonstrates a commitment to integrity and quality in business. Excellent initiative and interpersonal communications skills. Demonstrated ability to influence account decision makers at key levels. Salary Range: HIRING SALARY RANGE: $53,400-80,000(Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This role also offers a competitive Sales Incentive Plan that will take into account project, quarterly, and annual margin. This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** #LI - DS1 #SalesHiring

Job Summary Details: The School Custodian performs general cleaning duties in designated areas at a K-12 school, college or university campus environment. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM Employee Benefits | Front Line Team Members | (Programa de Beneficios de ABM) Basic Qualifications: • Must be 18 years of age or older • No experience required and on the job training provided. • No high school diploma, GED or college degree required. Preferred Qualifications: • Prior customer service experience • One (1) year of prior similar work experience. Responsibilities: • Clean and maintain assigned area, which may include classrooms, hallways, restrooms, locker rooms, office, and stairways • Sweep, remove debris, clean spills, and mop floors in designated areas • Regularly check trash receptacles, emptying as needed, in all designated areas • Follow procedures for the use of chemical cleaners and power equipment in order to prevent damage to floors and fixtures • Notify lead cleaner or manager concerning the need for minor or major repairs or additions to building operating systems • Establish and maintain effective communication and working relationships with clients, co-workers, shift coordinators, supervisors, managers, etc. • Collect, consolidate, and separate recycling into proper receptacles • Clean and dust desks, chairs, tables furniture, fixtures, doors, sills, floors, ceiling, and walls • Polish hard surfaces, e.g. woodwork, stainless steel surfaces • Wipe and clean tabletops, chairs, and equipment in food areas • Move cabinets, boxes, furniture, crates and equipment to clean areas, either manually or by using hand trucks • Clean interior partition glass, windows, glass partitions, and mirrors using soapy water or other cleaners, sponges, and squeegees • Sweep walks, rake leaves, cut grass, remove snow or perform other incidental seasonal tasks • Maintain the cleanliness of restrooms (clean and polish as needed) • Comply with all safety, security, compliance, and quality standards and procedures established by the Company, Clients, and regulatory authorities #500 A good job for someone just entering the workforce or returning to the workforce with limited experience and education. ABM is a military and veteran friendly employer, veterans and candidates with military experience encouraged to apply. Military Occupational Specialty Code: 92S, 92Y, LS, 3051, 3F1X1 About Us ABM (NYSE: ABM) is one of the world's largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM's comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries - from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit ******************* ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you'll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you're looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ******************* ABM does not accept unsolicited resumes.

The Diesel Mechanic performs a highly important full range of skilled mechanical maintenance, diagnostic, inspection and repair duties on passenger shuttle buses. Schedule: Tuesday-Saturday (5:00am - 1:30pm) ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM Employee Benefits | Front Line Team Members | (Programa de Beneficios de ABM) Position Summary Details The Diesel Mechanic performs a highly important full range of skilled mechanical maintenance, diagnostic, inspection and repair duties on passenger shuttle buses. Essential Duties Inspect, diagnose, adjust and repair diesel powered buses Perform general installation, repair, replacement and adjustment of bearings, ignitions, transmissions, differentials, axles, steering mechanisms, drive shafts, fenders, radiators and front end and rear suspension systems Perform a prescribed preventative maintenance program on the bus fleet and road test vehicles after work has been completed. Inspect buses and sign forms indicating compliance with State requirements provided by law. Perform work in adherence to safe work practices and procedures and in compliance with applicable standards and specifications, including to perform work in accordance with and maintain equipment as required Patch and install seat covers and other accessories on buses. Maintain inventory of parts and supplies on hand for the repair of vehicles; contact and compare vendors to obtain high quality supplies for the best price. Maintain a clean and orderly work area; maintain and repair shop facilities and equipment. Maintain a variety of records, including vehicle identification, date, mileage and nature of each inspection, maintenance, lubrication and repair performed Knowledge & Abilities: Methods, techniques and procedures used in the inspection, maintenance, overhaul, repair and adjustment of diesel-powered equipment. Operating and repair characteristics of a variety of automotive and shuttle bus diagnostic and repair equipment and tools. Methods, techniques, and procedures used in the repair and adjustment of fuel, ignition, electrical and cooling systems and chassis. Procedures of preventive maintenance related to automotive and shuttle buses. Laws, rules and regulations pertaining to shuttle bus operations and pupil transportation, including DOT compliance. Procedures of recycling and disposing of hazardous waste from motorized vehicles and equipment. Operational hazards and standard safety practices necessary in the area of assigned work. Principles and procedures of record keeping. Safe driving principles and practices. Ability: Perform the full range of mechanical work, including the diagnosing, troubleshooting, and repairing of equipment. Inspect, maintain, overhaul, repair and adjust gas- and diesel-powered equipment. Repairs adjust fuel, ignition, electrical and cooling systems, and chassis. Perform acetylene and arc methods of welding on motorized vehicles and equipment. Perform electrical work on motorized vehicles and equipment. Patch and install seat covers and other accessories. Accurately determine mechanical repair needs. Interpret and apply the policies, procedures, laws, codes, and regulations pertaining to assigned programs and functions. Work independently in the absence of supervision. Understand and follow oral and written instruction. Communicate clearly and concisely, both orally and in writing. Obtain a current valid Class B driver's license Establish, and maintain a positive working relationships with those contacted in the course of work. Experience: Four years of experience as a mechanic, including experience working with school buses, gas and diesel engines or passenger shuttle buses Any certificates or proof of continuing education in the mechanical field, i.e. Cummins, Caterpillar, Allison transmissions, welding, etc. License or Certificate: ASE certifications in engine repair, Automatic Transmission, Suspension & Steering, Brakes, Electrical Systems, and Heating & Air Conditioning strongly preferred. #500 About Us ABM (NYSE: ABM) is one of the world's largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM's comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries - from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit ******************* ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you'll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you're looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ******************* ABM does not accept unsolicited resumes.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Michigan City Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($31,905.34 - $59,252.77) Target Bonus: 5.0% Req ID: 27240 Long Description If you like being challenged, want to be a part of something special, and desire being part of an exciting team that is always striving to be at the forefront of our industry, then we're looking for you - a driven and motivated new team member. We are currently seeking to hire a Production Assembly Associate at our location in Michigan City, Indiana. Position Summary Responsible for assembling purchased parts and the various pieces that go together to form a finished product. The assembly associate will use various hand tools and power tools, in conjunction with their hands, to complete the job. Tools: Hand tools; screwdrivers, wrenches / sockets, wire strippers / crimpers, tape measure. Power Tools; drills, grinders, belt sander, band saw, and power riveter Responsibilities · Prepare work to be accomplished by studying assembly instructions, blueprint/wiring specifications, and bills of material; gather parts, subassemblies, tools, and materials. · Install parts and subassemblies by assembly drawings/on job training. · Assemble components by examining connections for correct and proper fit; fastening parts and subassemblies. · Resolve assembly problems: notify line supervisor to obtain additional resources/direction. · May train co-workers in production assembly. · May be required to complete production documentation. · Required to maintain a safe and clean working environment by complying with Vanair procedures, rules, and regulations. Skills · Ability to read blueprints, wiring schematics, assembly drawings · Able to read a tape measure · Good mechanical aptitude · Ability to work in a fast-paced environment Great Work Environment · Pleasant, clean, well-lighted environment · Family-oriented · First-of-the-month Friday company-supplied lunches · Company Parties including Christmas Party, Santa for the Kids, Summer Family Picnic, and more Local charity events Job Requirements Must have at least one year of hand and power tool experience Manufacuring experience is a plus Must be able to lift 50 pounds unassisted Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Maintenance and Reliability Director Build Your Career with an Industry Leader As the global leader of premium labels, Multi-Color Corporation (MCC) helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing expertise, MCC is focused on the future-developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. Position Objective The Maintenance and Reliability Director will focus on the deployment of Total Productive Maintenance (TPM) across Multi-Color Corporation in the Americas. This hands-on leadership role oversees a team of four and drives the implementation, execution, and continuous improvement of TPM principles across 38 manufacturing facilities. The Director enhances equipment reliability, operational efficiency, and fosters a culture of safety, quality, and continuous improvement. Key priorities include developing and executing the TPM framework, training and coaching plant staff, facilitating improvement projects, driving standardization and digital transformation, and ensuring alignment with MCC's business priorities Why Work at MCC Competitive compensation Comprehensive benefits package including medical, dental, vision, disability, life insurance, and 401(k). Paid holidays including New Year's Day, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Christmas Eve, and Christmas Day. Opportunity to lead TPM transformation across a global network and make a lasting impact on MCC's operational excellence journey. Responsibilities Lead and execute the transformation and sustainability of the Total Productive Maintenance (TPM) program across the Americas organization. Develop and deploy TPM strategies aligned with corporate and divisional goals, ensuring long-term operational stability and reliability. Serve as a change agent to lead individuals and teams through TPM implementation and culture transformation. Train, mentor, and coach site leadership teams and maintenance personnel on TPM principles, tools, and methodologies. Identify, prioritize, and manage improvement projects to enhance process yield, reliability, and operational efficiency; ensure visual TPM compliance in War Rooms and at points of impact. Support plants in data-driven decision-making-using root cause analysis, condition-based monitoring, and predictive analytics to improve performance. Collaborate with cross-functional partners including Operations, Engineering, and Corporate Leadership to align TPM with business strategies. Develop and maintain standardized documentation and methodology to ensure consistent TPM deployment across all MCC sites. Promote a strong safety culture and ensure TPM integration with plant safety systems and risk mitigation initiatives. Manage department budgets, allocate resources effectively, and track performance to business priorities. Required Skills and Qualifications Bachelor's degree in Mechanical, Electrical, Chemical, or Industrial Engineering (or related field). Eight or more years of experience leading Maintenance and Reliability programs, with proven TPM deployment expertise. Strong working knowledge of Total Productive Maintenance (TPM) principles, strategies, and tools. Expertise in Computerized Maintenance Management Systems (CMMS). Proven leadership and coaching skills; ability to develop high-performing teams and influence across a matrix organization. Experience in Lean and Continuous Improvement methodologies for process optimization. Strong analytical and problem-solving skills; able to analyze data, identify risks, and make data-driven decisions. Excellent communication and collaboration skills; able to engage and influence stakeholders at all levels. Technical aptitude to integrate new technologies and digital solutions into maintenance practices. Proficient project management skills to plan, execute, and deliver cross-site improvement initiatives effectively. Ability to travel up to 75% (domestic and international as required). Diversity & Inclusion: Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law. If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Gainesville Employment Status: Hourly Full-Time Function: Maintenance Pay Range: ($53,381.00 - $80,071.00) Target Bonus: % Req ID: 27629 Job Responsibilities Job Requirements Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Michigan City Employment Status: Salary Full-Time Function: Engineering Pay Range: ($74,603.39 - $138,549.16) Target Bonus: 8.0% Req ID: 27301 Overview Vanair , a Lincoln Electric company, has been an industry leader since 1972, working to bring our customers the very best in Mobile Power Solutions . Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxyfuel cutting equipment, and has a leading global position in brazing and soldering alloys. We are recognized as the Welding Expert™, which advance customers' fabrication capabilities to help them build a better world. If you like being challenged, want to be a part of something special, and desire being part of an exciting team that is always striving to be at the forefront of our industry, then we're looking for you - a driven and motivated new team member. We are currently seeking to hire a Mechanical Engineer at our location in Michigan City, Indiana. Job Summary As a member of the Engineering staff, the Mechanical Design Engineer will design, test and develop, and maintain products, options, and accessories following company and industry standards. Primary Duties and Responsibilities Design and specify product component parts, subassemblies, and complete assemblies (New Product Development). Assist R&D personnel with set-up and laboratory testing to validate product performance. Analyze and interpret test data and make product revisions as necessary to comply with performance and safety requirements. Read, create, and maintain engineering documents such as exploded part assemblies, basic wiring and electrical schematics, and fabrication/machined detail drawings. Use the ECN (Engineering Change Notice) process to effectively and efficiently manage change aimed toward product improvement. Formulate product design specifications and update as required. Support assembly line by analyzing and solving problems or obstacles that occur during production. Help train production line and service departments for new builds and product improvements. Productively function in a fast-paced Engineering department that works intimately with manufacturing plant, sales personnel, and Service/Training team. Occasionally travel to assist with new applications, diagnostics, or trade shows. Assist with maintaining applications/equipment and how they integrate with evolving model year truck manufacturer changes. Other duties as assigned. Up to 50% travel to customer sites expected throughout North America Job Qualifications and Skills Mechanical Engineering, Technologist or related degree preferred, but will consider relevant work experience in lieu of a degree. Minimum 3 years experience in design, troubleshooting, and analysis of pneumatic, electrical, mechanical, and hydraulic controls and systems. Experience with rotary screw compressors. Good aptitude with hydraulic and mechanical driven equipment. Experience with automotive power train - work trucks, large equipment, and PTO proficiency is a plus. 2D / 3D CAD drawing environment experience (AutoCAD and Inventor preferred). Must be able to juggle priorities effectively. Must have a positive attitude and function well with group-oriented tasks. Experience with a document control system such as a Vault is a plus. Great Work Environment Pleasant, clean, well-lighted environment Family-oriented First-of-the-month Friday company-supplied lunches Company Parties including Christmas Party, Santa for the Kids, Summer Family Picnic, and more Local charity events Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Ladson Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 27677 Job Responsibilities PRIMARY FUNCTION Assemble, wash, and pack small parts; provide final inspection before shipment ESSENTIAL FUNCTIONS Mark and pack parts per instructions Assemble parts per instruction Operate and maintain wash line Prioritize workload Monitor inventory of packaging supplies and notify supervisor/lead/planner when reorder is required Operate computer and other electronic equipment Participate in continuous improvement activities Perform general shop duties as assigned and assist in other areas as workload requires Job Requirements REQUIRED SKILLS High school diploma/GED or equivalent work experience Strong ability to organize and prioritize tasks with a sense of urgency Self-directed and self-motivated Ability to lift up to 50 pounds unassisted Ability to stand for two+ hours continuously Ability to follow both verbal and written instructions Ability to communicate in an effective manner Excellent motor skills/dexterity WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to stand, walk, and use hands to assemble and package material. The employee occasionally lifts and/or moves up to 50 pounds. OTHER DUTIES Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

HIRING FOR 2ND AND 3RD SHIFTS. 2ND SHIFT WORK HOURS TYPICALLY 4 PM TO 1AM. 3RD SHIFT WORK HOURS TYPICALLY 11 PM TO 8AM. Maintain, repair, and perform evaluations and preventative and predictive maintenance on refrigeration systems according to PM List and instructed by leadership. Monitor system performance. Replace components within the refrigeration's system, with safe LOTO procedures and in accordance with PSM program. Troubleshoot equipment and recommend corrective action. Complete work orders and PMs ensuring all performed work is logged into the computerized maintenance management system (CMMS) (APSM) daily. Operate, maintain and troubleshoot ammonia refrigeration compressors, condensers, pumps, vessels, re-circulators, purgers, evaporators, valves, etc. All other relevant duties to the job. RETA 1, or equivalent industrial ammonia refrigeration training such as Stellar, Frick, Lanier/GCAP, or employer training program 1+ year experience operating and maintaining Ammonia Refrigeration systems required. 1+ year experience with electrical low and high voltage circuits required. Strong math skills and technically savvy.

Route Service Manager UniFirst seeking a Route Service Manager to join our team! The Route Service Manager will recruit and lead a team of Route Service Supervisors and Route Service Representatives who deliver to multiple customers per day - ranging from small family owned businesses to major corporate locations. The ideal candidate will drive customer satisfaction, account growth, and profitability for their location. What's in it for you? Training: Our Team Partners get quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Mobility: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. The Route Service Manager role can lead to many other leadership opportunities in our Plants and across the organization. Culture: Our family culture is what makes UniFirst an organization that stands out from the rest. Did we mention no nights or weekends? Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Oversee the recruiting, training, and development of a team of Route Service Representatives and Route Service Supervisors Build strong relationships with your customers and elevate your team's level of achievement in customer satisfaction Collaborate closely with location management team to provide the best customer service and product programs Negotiate customer contract renewals Qualifications What we're looking for: An individual who is business savvy and enjoys figuring out innovative ways to help increase profit and grow the customer satisfaction within their UniFirst Location A results-driven, relationship manager who isn't afraid to roll up their sleeves and help the team and most importantly, the customer Someone who will enjoy working with your own team of Route Service Representatives and Route Service Supervisors that need your help and support as they develop in their own role Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards. High School Diploma or GED - bachelor's degree preferred. Prior customer service experience Ability problem solve and handle a variety customer service situations Ability to negotiate, train, coach and lead a team Strong computer proficiency (MS Office) Excellent verbal & written communication skills 21 years of age Valid non-commercial driver's license in the state of residence Must meet pre-employment DOT physical requirements Physically capable of lifting up to 50 pounds Benefits & Perks 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career. In this role, you will provide in-store merchandising support to Retailers to meet shoppers' needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. Are you ready to shape the future of shopping and get it done with us? What we offer: Competitive wages; $13.75 per hour Growth opportunities abound - We promote from within No prior experience is required as we provide training and team support to help you succeed Additional hours may be available upon request We offer benefits that can be customized to meet your family's needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate Perks Now, about you: Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing manner You're 18 years or older Can perform physical work of moving, bending, standing and can lift up to 50 lbs. Have reliable transportation to and from work location Demonstrate excellent customer service and interpersonal skills with our clients, customers and team members Are a motivated self-starter with a strong bias for action and results Work independently, but also possess successful team building skills Have the ability to perform job duties with a safety-first mentality in a retail environment If this sounds like you, we can't wait to learn more about you. Apply Now!

Pay: Wages based on skill set: Entry level: $21.00 - $24.00, Mid-Level: $35.00 - $37.00, Senior Level: $40.00 - $45.00 The pay listed is the salary range for this position. A specific offer will vary based on applicant's experience, skills, abilities, geographic location, and alignment with market data. Responsibilities: Working Safely and follow all protocols to remain safe while working in a chemical factory. Understand the basics that are required within the OSHA 10. Working closely with Experienced HVAC/EXHAUST Testing, Adjusting and Balancing Technicians in an automotive manufacturing facility. Maintaining System and equipment balance during new installations and the de-installation of old process equipment. Troubleshooting issues that come from designs not being able to be met on the air requirements of the process equipment. Working as a team and keeping each other accountable and safe. No one should go home in any other condition than equal to or better than when they arrived at work that day. Assists in emergencies as needed in the evening and / or weekends when the customer needs it. Qualifications: Must be 18 years of age or older Must be a willing to become a Sheet Metal workers Union # 67 member. Must have NEBB, TABB, or AABC certification in test and balance or have at least 3 years' experience as a TAB technician. Preferred Qualifications: Hard worker that has a desire to learn for growth in the Testing, Adjusting and Balancing industry. Ability to follow written work plans and ask questions if there is a deviation to the scope of work listed within the work plans. Hold others accountable if they are not following the Customers or ABM's expectation and policies. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM Team Member Benefits | Front Line Team Members | (Programa de Beneficios de ABM) #200 About Us ABM (NYSE: ABM) is one of the world's largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM's comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries - from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit ******************* ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you'll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you're looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ******************* ABM does not accept unsolicited resumes.