Manufacturing Engineering Internship jobs at AMETEK - 1924 jobs

Develops, evaluates, and improves manufacturing methods at a high level. Utilizes knowledge of product design, materials, tooling and production equipment capabilities, assembly methods, and quality control standards. Responsible for designing and developing solutions to support engineering and production processes relating to machining, fabrication, and assembly fixtures and tooling. Work closely with other departments on related projects. Duties and Responsibilities: * Analyzes and plans work force utilization and workflow. * Estimates production times, staffing requirements, and related costs to provide information for management decisions. * Communicates manufacturing capabilities, production schedules, or other information to facilitate production. * Communicates with customers in order to determine specifications of components and negotiate product design and process deliverables. * Leads project requirements checklists through justification and/or rationalization of activities associated with product launches. * Coordinate and lead launches of new processes including establishing goals, training team members and evaluating results. * Leads quoting process. * Identifies excessive tooling costs, develop methods for cost reductions, and implements identified cost reductions. * Leads engineering test protocol development and reporting for process characterization and process testing. * Apply statistical methods and perform process analysis for cost reduction, quality improvement and improved efficiency. * Designs and develops manufacturing processes in support of engineering for new products, and other in-house applications; i.e. gages, tooling, setup and work instructions, and fixtures. Education: * 4 year Bachelors Degree in Mechanical Engineering or related field Experience: * 7+ years in Manufacturing Engineering or related field KSA's: * Excellent interpersonal and communication skills. * Ability to determine and meet deadlines. * Ability to work independently as well as part of a team. * Analytical thinking skills. * Strong problem solving, decision making, and process improvement skills. * Proficient blue print reading and GD&T knowledge. Compensation Employee Type: Salaried Salary Minimum: $80,000 Salary Maximum: $130,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit ************** for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call ****************. Nearest Major Market: Dayton

Powell is hiring a Senior Manufacturing Engineer in Southeast Houston! Our Manufacturing Engineers are the process owners that design and improve processes and procedures used for the manufacturing of Powell engineered to order products. This position is required to identify and implement processes that improve the safety, quality, and operating efficiency in a manner that supports the objectives of the Business Unit. Posted position does not allow for sponsorship or relocation assistance. Position Summary • Evaluates manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators. • Develops manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; conferring with equipment vendors. • Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. • Assures product and process quality by designing testing methods; testing finished- product and process capabilities; establishing standards; confirming manufacturing processes. • Provides manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements. • Prepares product and process reports by collecting, analyzing, and summarizing information and trends. • Provides manufacturing engineering information by answering questions and requests. • Maintains product and company reputation by complying with government regulations. • Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special service. • Maintains product and process data base by writing computer programs, entering data. • Completes design and development projects by training and guiding technicians. • Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies. • Contributes to team effort by accomplishing related results as needed. Job Requirements • BS Degree in Manufacturing or Industrial Engineering. • Minimum 3-5 years of experience in a Manufacturing Engineer role. • Demonstrated proficiency with computer skills using Oracle and MS Office Suite. • Demonstrated success with specifying, implementing, and manufacturing equipment. • Demonstrated mechanical aptitude. • Advanced knowledge using drafting/CAD skills with the ability to create and modify Factory Layouts. • Knowledge of ISO 9001 Quality System. • Experience with either the Toyota Production System or Lean Manufacturing. • Project Management experience, leading multi-disciplined teams. • Proven track record of completing process improvements from conception through final implementation and ramp-up. • Familiar with statistical test procedures and corrective action techniques. • Excellent mechanical and electrical systems aptitude. Understanding of pneumatic, hydraulic, and servo positioning systems, as well as, and machine controls. • Project involvement and organizational skills to handle multiple priorities. • Demonstrated written and verbal communication skills. • Demonstrated simple analytical and problem-solving ability. • Ability to implementing designs and solutions. • Able to follow directed instruction. • Able to lead change and respond to tactical changes. • Able to prioritize and manage time effectively. (Self-motivated and self-managing). • Attend in house and outside training sessions. • Learn policies and procedures, work instruction, ISO policies, Safety Rules and Regulations, and vendor products. #LI-CAB In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact ************. Application status inquiries will not be accepted in this manner.

Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site. Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel. ESSENTIAL DUTIES AND RESPONSIBILITIES · Monitor and continuously improve daily quality/efficiency performance for assigned areas. · Design and procure production tooling, processing equipment and workstations. · Coordinate layout and workstation move activities. · Prepares time estimates for proposed projects and evaluates time factors. · Minimize change over time by ensuring programs use common set-ups where possible. · Verify that machine maintenance is being performed on schedule. · Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations. · Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations. · Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment. · Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. · Comply and follow all procedures within the company security policy. · May perform other duties and responsibilities as assigned. JOB QUALIFICATIONS KNOWLEDGE REQUIREMENTS · Key Requirements: o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.) o Understanding of Jabil's global strategies and direction o Understanding of site's facilities, capabilities and how they tie back to the Jabil strategies and direction o Strong analytical ability o Able to implement continuous improvements and cost reduction programs o Good communication skills · Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.

We're Hiring: Manufacturing Production/Project Engineer | Emporia, KS Are you a hands-on engineer who thrives in fast-paced manufacturing environments? Hopkins Manufacturing is looking for a Manufacturing Production/Project Engineer to play a key role in optimizing our processes, enhancing product quality, and supporting the continued innovation of our facilities and operations. This is more than just an engineering role - it's an opportunity to drive real impact across multiple areas of production, from workstation design to capital project execution. What You'll Do: Design safe, efficient workstations and processes for a diverse range of products Conduct time studies and define accurate labor standards Support Quality Control with process improvements Evaluate new technologies to improve cost, efficiency, and scalability Lead facility upgrades, capital equipment purchases, and layout enhancements Collaborate across departments and with external vendors to bring ideas to life What We're Looking For: BS in Engineering/Technology or 3-5 years of relevant manufacturing experience Strong analytical thinking, communication skills, and adaptability Experience with plastic injection molding is a strong plus A mindset for continuous improvement and safety-first thinking Why Hopkins? At Hopkins Manufacturing, we don't just build products - we build careers. Be part of a company that values innovation, teamwork, and long-term growth. You'll have the tools and support to take ownership of projects from concept to implementation. Ready to engineer your next career move? Hopkins Manufacturing Corporation is an equal opportunity employer and follows all national, state and local ordinances regarding applicant consideration. Hopkins Manufacturing Corporation has reviewed this to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the company reserves the right to change this job description and/or assign tasks for the employee to perform, as the company may deem appropriate.

Before applying for this job, please read description in its entirety and if you are qualified and interested, follow the directions below on how to apply. This position is located in Roseville, CA. No relocation package is provided for non-local candidates. Harris & Bruno International is looking for a Manufacturing Engineer to work in a high pace manufacturing environment. This individual will be expected to: Carry out process improvement, problem resolution, project management and employee training. Improve manufacturing processes and methods for cost reduction, quality improvement and efficiency. Prepare and present plans and coordinate deployment including training of team. Designs, develops, and tests and/or sources and cost-justify various tools, machinery and equipment for recommended manufacturing methods. Assist in improving production control, standard operating procedures, safety, quality control and training. Perform research, design, and development of manufacturing processes including production flow, assembly methods and production equipment. Prepare and maintain detailed layouts of building and equipment. Coordinate the manufacturing launch of new/revised products including establishing goals, training team members and evaluating results. Perform product/process analysis for cost reduction, quality improvement, and improved efficiency. Represent manufacturing on cross functional teams. Maintain product and company reputation by complying with government regulations. Benefits Package Includes: Medical Dental Voluntary Vision Company provided life insurance with the option of additional voluntary life insurance. 401k with employer match. Robust PTO policy beginning with 3 weeks earned the first year. Paid holidays. Knowledge/Skills: Technical Capacity. Proficient at problem solving and analysis. Leadership. Communication proficiency. Education/Experience: Bachelor degree in Engineering required. 3 or more years' experience as a Manufacturing Engineer. Experience with 3-D Modeling Harris & Bruno International is a stable company that has been in business since 1948. We are experiencing regular, steady growth in our core and developing product lines. We enjoy a strong presence in the rapidly expanding commercial printing market supporting customers who package products that you use every day.

We're looking for a hands-on, curious, and driven Manufacturing Engineer Intern to join our team! This internship offers a unique opportunity to gain real-world experience by working both in an office setting and directly on the production floor. You'll play a key role in identifying inefficiencies, improving processes, and supporting continuous improvement initiatives that drive productivity and quality. What You'll Do: Collaborate with engineers and production staff to analyze current manufacturing processes Identify opportunities for process improvements and assist in implementing solutions Collect and analyze data to support efficiency and workflow enhancements Assist in the design and layout of workstations, tools, and equipment Document standard operating procedures and best practices Support ongoing lean manufacturing and continuous improvement projects Participate in cross-functional team meetings and contribute ideas Requirements Currently pursuing a degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, or a related field Strong analytical and problem-solving skills Comfortable working in both office and production environments Excellent communication and teamwork abilities Proficiency in Microsoft Office; experience with CAD or data analysis tools is a plus Eagerness to learn and contribute in a fast-paced, hands-on environment Why Join Us? Gain valuable, real-world engineering experience Work on meaningful projects that make a tangible impact Learn from experienced professionals in both engineering and manufacturing Be part of a supportive and innovative team BENEFITS: • 1 hour of PTO per 40 hours worked • On-Demand Pay - Access your earned pay prior to payday • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Salary Description $16-$18 per hour

Designs manufacturing processes, procedures and production layouts for CCA and module assemblies. Cable harness experience and process writing are a plus. Interprets engineering prints to design processes and works with design engineering to implement production improvements. Supports the production floor by working with the operations team and focusing on continuous improvement. Designs, procures, and implements tooling to support manufacturing processes. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations and specifications. Supports the production floor by working with the operations team. Designs manufacturing processes and production layout for circuit card assemblies and subassemblies. Understands how the circuit card process works. Cable harness experience is a plus.

Industrial Engineer - Production Systems & Continuous Improvement Salary: $80,000 - $90,000 Schedule: Full-Time About the Role We are seeking an Industrial Engineer to focus on optimizing production systems, improving manufacturing efficiency, and ensuring production lines operate at peak performance. This role is centered on production flow, line configuration, and operational effectiveness, rather than product or equipment design. The Industrial Engineer will lead and support initiatives that improve throughput, quality, and consistency across manufacturing operations. This position includes ownership of special projects, oversight of engineering interns, and collaboration with technicians and operations teams to implement sustainable improvements. Key Responsibilities Evaluate and improve production systems, workflows, and line layouts Lead manufacturing process improvement initiatives across operations Perform time studies, analyze labor and cycle times, and update routings accordingly Ensure work instructions and standard processes are accurate, effective, and up to date Support and lead line rebalancing, reconfiguration, and optimization projects Apply continuous improvement methodologies (Lean, Kaizen, 5S, 5 Why, 8D, PPAP) Train, coach, and support manufacturing technicians during process changes Provide on-floor engineering support to resolve process, electrical, and production issues Mentor and oversee engineering interns Troubleshoot manufacturing and operational challenges and implement corrective actions Interpret and apply technical drawings and schematics to production processes Support adherence to ISO standards and internal quality systems Collaborate with engineering, operations, quality, and leadership teams Promote safety, quality, and operational excellence throughout the facility Required Qualifications Bachelor's degree in Engineering (Industrial, Manufacturing, Mechanical, Electrical, or related discipline) Experience in a manufacturing or industrial production environment Strong working knowledge of electrical systems (required) Solid mechanical aptitude with practical manufacturing exposure Demonstrated ability to analyze processes, identify gaps, and implement solutions Hands-on experience with process improvement and production optimization Ability to develop, revise, and maintain technical documentation and standard work Strong communication skills and ability to work cross-functionally with technicians, engineers, and leadership Preferred Qualifications Experience supporting HVAC manufacturing systems or components Familiarity with ISO 9001 and ISO 14001 Experience with leak detection or similar testing processes Background in electrical engineering or advanced electrical troubleshooting Experience mentoring interns or early-career engineers Who This Role Is For This position is well-suited for an Industrial Engineer who enjoys: Improving how production systems operate day to day Leading efficiency and throughput improvement efforts Working closely with manufacturing and operations teams Taking ownership of projects that directly impact production performance Compensation & Benefits Competitive salary: $80,000 - $90,000 Stable, established manufacturing environment Opportunity to lead meaningful production and efficiency initiatives Career growth and professional development

Do you want to work for a company where the people are the purpose? Grimco is a leading $1.5 billion sign supply distribution company serving the graphics and signage industry. As a family-owned business, we combine the stability and resources of an industry leader with the agility and innovation of an entrepreneurial environment. Job Description We're seeking a Mechanical/Industrial Engineering Intern who wants real-world experience applying Six Sigma methodologies in a manufacturing environment. You'll own process improvement projects from concept to completion, working hands-on in our production facility to drive measurable operational enhancements. What You'll Do Design and execute Design of Experiments (DOE) in manufacturing environments to optimize process parameters and product quality Conduct Big Data Analysis to uncover patterns and insights from production data streams Combine AI with Mechanical and Industrial Engineering tools to develop intelligent automation solutions Execute DMAIC projects to reduce process variation and eliminate manufacturing waste Conduct time studies, process mapping, and statistical analysis to identify improvement opportunities Design and prototype automation solutions for production line efficiency Apply statistical process control techniques to monitor and optimize manufacturing operations Collaborate with production teams to implement Lean manufacturing principles Present data-driven findings and recommendations to facility leadership Qualifications Currently pursuing a degree in Industrial, Mechanical, Manufacturing, or related Engineering field Expected graduation date: 2027 or 2028 Coursework or project experience in Six Sigma, statistical analysis, or process improvement Self-starter who thrives with autonomy and data-driven problem solving Comfortable working in a manufacturing environment with production equipment Familiarity with statistical software, process mapping tools, or quality control methodologies Ready to make your mark? Apply today and join us in driving operational excellence in sign manufacturing! What We Offer Hands-on experience applying Six Sigma tools with immediate impact Mentorship from experienced engineering professionals and certified Black Belts Exposure to diverse manufacturing processes in the sign and graphics industry Competitive internship compensation Potential for full-time opportunities upon graduation Additional Information Grimco is a national wholesale sign supply manufacturer and distributor with over 50 locations across North America. We focus on distributing quality products and providing excellent service to the sign industry. Our offering of sign supplies includes traffic signs, blanks, substrates, boards, digital print media, wrap films, sign vinyl, application tape, banner material and supplies, sign frames, banner stands, LEDs and electrical accessories, grand format solvent/UV/latex printers, inks, software and more. By completing this online application for employment, you certify that the information on this application is true and complete to the best of your knowledge. You understand that any misrepresentation or omission of fact in response to any inquiry made in this application may result in rejection of application or, if hired, dismissal whenever it is discovered. You authorize and release all parties from any liability or damage that may result from seeking, furnishing, or using such information. You understand and agree that, if hired, your employment is for no definite period and may, regardless of the date of payment of compensation, be terminated by Grimco, Inc. at any time, for any or no reason, with or without notice. You understand that no representation to the contrary is valid unless in writing, set a definite term of employment, and signed by the company's CEO. You further understand and agree that any job offer is contingent upon your passing, to the company's satisfaction, a drug and/or alcohol test, criminal background check and other possible screenings. You understand that this application is active for 90 days only, and if you do not hear from the company but still wish to be considered for employment after 90 days, you will need to fill out a new application.

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Responsibilities: Technician for satellite communications industry Responsibilities include alignment, testing, troubleshooting and repair of high power solid state microwave amplifiers with a block upconverter and a digital control interface. Requires ability to understand standard RF test measurements and a familiarity with RF test equipment, including but not limited to: Spectrum analyzers, Signal Generators, Network Analyzers, Power Meters, etc. Job involves tuning high power RF amplifiers to meet customer specifications. Will be working on S-Band, C-Band, X-Band, and Ku-Band amplifiers. Knowledge of standard RF test parameters is important - gain, power, VSWR, intermodulation distortion, 1dB compression, harmonics, etc. Qualifications: Two year associates degree in electronics or equivalent military/work experience Job requires interest in applying hands-on skills to tune, troubleshoot and test RF (radio frequency) and microwave circuits applying principles and theories of electronics and electrical circuits. Requires soldering skills for tuning. Solid computer skills. Education and/or Experience Requires a high school diploma and some degree of vocational or technical training and a minimum of 2-5 years of directly related experience. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to apply concepts of basic algebra and geometry. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Salary Range: $49,300.00-$65,700.000 Pay Transparency The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Nikon AM Synergy Inc. is a cutting-edge provider of metal additive manufacturing (AM) solutions, specializing in the aerospace, defense (ultra-secure), and space industries. We focus on the manufacture and certification of production flight hardware, aiming to drive industry growth through the integration of AM technology. As a part of the Nikon Advanced Manufacturing Ecosystem, we leverage our engineering and manufacturing capabilities, alongside Nikon SLM Solutions and organic AM solutions, to push the boundaries of additive manufacturing in industry. Position Overview The Additive Manufacturing Technician will support the hands-on fabrication of additively manufactured flight hardware. Following established procedures, work instructions, and sequences of operations, the Additive Manufacturing Technician will operate, maintain, and monitor additive manufacturing machinery, and handle powder. Reports to: Senior Operations Manager Responsibilities: Ensure additive manufacturing processes meet or exceed internal, customer, and industry quality requirements. Perform a variety of duties pertaining to the machine set up, calibration, and maintenance of additive machines and supporting equipment. Build support removal. Safely handle powder within the additive production process. Participate in and/or lead problem-solving and continuous improvement opportunities. Maintain a clean and safe work environment, particularly regarding powder and chemical usage. Job Duties Operate additive machines, such as: EOS M290, EOS M4K, SLM 280, SLM NXG and SLM500 Perform setup, operation, and daily maintenance on additive manufacturing machines. Utilize precision measuring instruments such as calipers, micrometers, and dial indicators. Propose innovative technologies and ideas to enhance additive manufacturing solutions. Proficiently use hand, power, and pneumatic tools for various tasks. Handle powder, including sieving, sampling, loading, and cleaning. Conduct self-inspection of parts/components with keen attention to detail. Monitor builds according to a flexible schedule. Ensure traceability of all powder and parts. Document test procedures and results, suggesting improvements to manufacturing and engineering processes. Collaborate with cross-functional teams to develop manufacturing solutions and address issues. Uphold compliance with customer and industry quality standards and safety regulations related to powder handling. Contribute to company-wide implementation of operational policies and procedures. Skills Proficiency with various pneumatic and hand tools. Knowledge of raw materials, production processes, quality control, and cost optimization techniques in additive manufacturing. Familiarity with machines and tools used in additive manufacturing operations, including EOS and SLM equipment. Ability to assess performance and implement improvements. Strong organizational skills for meticulous planning and prioritization. Excellent written and oral communication skills, including proficiency in MS SharePoint and MS Office. Experience / General Requirements PREFERRED: 2+ years of experience with Additive Manufacturing or similar manufacturing environment REQUIRED: Able to work flexible hours, according to the schedule of the machine builds REQUIRED: Compliant with the International Traffic in Arms Regulations (ITAR) which requires U.S. person status (ITAR defines "U.S. Person" as a U.S. Citizen or U.S. Permanent Resident REQUIRED: Obtain and maintain a security clearance. Work Environment and Safety Requirements The work environment characteristics described here are representative of those an employee encounter while performing the essential functions of the job. Properly wear personal protective gear throughout the day, including gloves, hearing protection, eye protection, protective footwear, and respirators. Acquire proficiency in technical material related to additive manufacturing and machine maintenance. Maintain a stationary position for up to three hours as needed. Operate, prepare, inspect, manipulate, and position parts, tooling, and machinery effectively. Utilize digital applications on interfaces like tablets or smartphones proficiently. Occasionally ascend/descend ladders. Adjust shelving, access stacked powder canisters, and store tooling by positioning oneself (standing, kneeling, crouching, or crawling). Communicate with teammates and internal stakeholders regularly regarding daily updates, hazard concerns, questions, and issues. Detect non-conformances, conduct inspections of additively manufactured parts and machinery, assess the manufacturing process for flaws and failed builds, estimate powder quantities during filling, and adjust machines through GUI interfaces. Move, position, lift, and stack parts weighing up to 50 pounds on a daily basis. Regularly push carts, RUWAC vacuums, and other machinery throughout the facility.

Your Career Begins at Timken If you're ready for a challenging career that provides you with the ability to advance personally and professionally, look to Timken. Our associates make the world more productive by improving the efficiency and reliability of the machinery that keeps industry in motion. Manufacturing Technician Scope: Set-up and operate precision CNC machining equipment to produce ball bearing components. This is a 2nd shift position, with regular hours of 3:00 p.m. to 11:00 p.m. Monday - Friday. What We Offer Competitive pay. Comprehensive benefits package including medical, prescription drug, dental, and vision insurance. Benefits start on first day of employment. Opportunities for career advancement. Supportive and team-oriented work environment. Safe, clean, comfortable work environment. Position Summary Timken is looking for a skilled Machine Operator to set up, maintain, and operate production machinery. You'll ensure high productivity while meeting exacting safety and quality requirements. If you have a strong attention to detail and passion for ensuring quality output, we invite you to apply. Position Responsibilities: Setup and Operations - Set-up and operate production equipment including CNC lathes, honers, and bore grinders. Gauging - Basic measurement of bearing geometry using state-of-the-art computer controlled gauging equipment as well as digital calipers, micrometers, metallurgical techniques, and dial indicators. Quality through Process Control - Use process control techniques such as SPC, Histograms, Pareto analysis, etc. to understand and make adjustments to the manufacturing process. Emphasis placed on recognition, diagnosis and correction of out-of-control conditions. Will make quality checks to include concentricity, roundness, barreling, and eccentricity. Tolerancing up to and including .0000050. Problem solve to achieve above tolerancing and quality. Zone Control - sound ANDON to signal abnormal condition or problem. Problem solve to correct issue. Maintenance - Monitor, clean, and inspect equipment to prevent problems before they occur, tied with routine maintenance of equipment and troubleshooting problems of minor to moderate complexity. Perform operator level Preventive Maintenance. Material Handling - Move work in process to adjacent operations. Complete affiliated administrative flow requirements as needed. Customer Focus - Achieve a clear understanding of the customer's (internal and external) technical requirements for each order. Responsible for assuring conformance to these requirements. Team Participation - Collaborate with a variety of plant teams focused on continuous improvement. Occasionally serve as facilitator of such teams. Regularly rotate to other machines and assist team members in meeting Team Metrics. Training - Continuously develop and upgrade training materials used to train other technicians, and occasionally assist in training. Safety - Requires daily participation and involvement in individual and team safety responsibilities such as Behavior Based Safety, daily housekeeping, proper use of Personal Protective Equipment (PPE), and adherence to all safety requirements and policies. Continuous Improvement - Generate and implement ideas for quality improvements and cost savings. Basic Requirements: Proven experience as a Machine Operator or similar role in a manufacturing environment. Technical skills in machine operation and troubleshooting. Ability to read blueprints, schematics, and manuals. Physical stamina and strength to lift heavy materials and work in a fast-paced environment. Attention to detail and quality-focused mindset. High school diploma or GED. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status. Timken is a global technology leader in engineered bearings and industrial motion. Our expanding portfolio of next-generation solutions helps customers around the world improve efficiency, solve their toughest challenges, and push the boundaries of performance. We employ 19,000 people globally, operate from 45 countries, and posted $4.6 billion in sales in 2024. We have been recognized as one of America's Most Responsible Companies 5x by Newsweek and one of the World's Most Ethical Companies 14x by Ethisphere. Why Choose Timken? Over a century of knowledge and innovation A culture of top performance A global, diverse environment Products that contribute to a sustainable world A conviction to improve communities around us Competitive salary and benefits Not Ready To Apply? Stay connected by joining our network and we'll keep you informed about upcoming events and opportunities that match your interests. Talent Community

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Manufacturing Engineer Technician Location: Mocksville, North Carolina (Onsite) Shift: 7:00am-4:00pm About Us Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: Ingersoll Rand Mocksville is looking for a Manufacturing Engineer Technician to assist their team of manufacturing engineers in special projects. This role will be a contributor to various projects throughout the plant and gain relevant knowledge to processes and procedures in a manufacturing environment. Responsibilities: Learn and understand different manufacturing methods and processes Evaluate current processes and make recommendations for improvement based on our guiding principles of Safety, Quality, Delivery, Inventory and Performance Assist in Drop Zone Changes, BOM updates Communicate with internal and external engineering functions effectively Present and communicate information to peers and management Lead or support Kaizen activities Lead or support standardization initiatives Drive Quality Improvements and efficiency improvements on production line Interface with other internal groups or organizations Requirements: Must be currently pursuing or currently hold a bachelor's in manufacturing engineering, industrial engineering, or mechanical engineering 1+ years of experience with basic CAD/CAM software skills Core Competencies: Leadership skills Teamwork skills Problem-solving skills Good information technology skills Excellent communication skills Ability to work in a team environment and take initiative Preferences: Must be currently pursuing or currently hold a master's in manufacturing engineering, industrial engineering, or mechanical engineering What we Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit ************* APPLY NOW

Your Career Begins at Timken If you're ready for a challenging career that provides you with the ability to advance personally and professionally, look to Timken. Our employees make the world more productive by improving the efficiency and reliability of the machinery that keeps industry in motion. Together, We'll Keep the World Moving Forward. Not everyone knows what Timken makes. But you'll recognize what we make possible. Timken engineers solutions that keep the world moving by offering products and services to keep the world's equipment, machinery and vehicles in motion. Everywhere from NASCAR to NASA. Position Summary: We have an opportunity at our Montgomery, IL location for a Manufacturing Engineering Technician. This role specifies and develops operational sequences and manufacturing methods to ensure safe, efficient, and cost-effective production. This role provides technical support to internal and external customers, supports CNC machines with programming, troubleshooting, and DNC library management, and collaborates across disciplines to optimize part manufacturability and process reliability What We Offer: The annual salary range for this position is $50,000 - $65,000 based on experience. Comprehensive benefits package, including medical, dental and vision coverage. Benefits start on first day of employment. 401(k) retirement savings plan with generous company match. 10 paid holidays per year plus paid vacation. Paid parental leave at one year of service. Employee discounts on products and services. Education expense reimbursement, eligible to apply at first day of employment. Opportunities for professional development and career growth. Essential Responsibilities: Partner with product engineers to develop part configurations that are manufacturable and cost-effective. Work with the quoting department to define and review process steps, tooling needs, and cycle times to produce accurate costing for new and existing parts. Act as a liaison with suppliers to ensure reliability and cost effectiveness of outsourced processes. Develop, review, and maintain routings and process documentation regularly to ensure process efficiency and effectiveness. Collaborate with manufacturing engineering and production teams to develop and refine CNC programs for new parts using best-practice, efficient programming techniques. Review and maintain existing CNC programs and DNC library management to ensure up-to-date, efficient program usage. Troubleshoot CNC programs, setups, and tooling; support and train production personnel as needed. Use CAD/CAM modeling software to perform analysis, generate layouts, and support programming and fixturing. Develop or review process steps for sales order checklists to support accurate order processing and manufacturing readiness. Develop, review, and troubleshoot manufacturing processes, setups, fixtures, and cycle times; provide training and production floor support. Evaluate, recommend, and test machinery and equipment for process implementation and capability improvements. Determine rework methods to salvage non-conforming parts and minimize scrap. Perform analysis and layout designs using engineering design software; assist with design and fabrication of prototype parts Basic Qualifications: High school diploma or equivalent. Preferred associate degree or technical diploma in Manufacturing Technology, Mechanical Engineering Technology, or related field. At least 5 years of experience in machining processes, tooling, fixtures, and machining best practices. Proven experience supporting CNC machining operations, including programming (CAM), troubleshooting, and DNC library management Able to read and interpret engineering drawings and customer specifications; proficient with CAD and internal software systems. Self-accountability to meet deadlines. All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status or any other basis protected by applicable law. Timken is a global technology leader in engineered bearings and industrial motion. Our expanding portfolio of next-generation solutions helps customers around the world improve efficiency, solve their toughest challenges, and push the boundaries of performance. We employ 19,000 people globally, operate from 45 countries, and posted $4.6 billion in sales in 2024. We have been recognized as one of America's Most Responsible Companies 5x by Newsweek and one of the World's Most Ethical Companies 14x by Ethisphere. Why Choose Timken? Over a century of knowledge and innovation A culture of top performance A global, diverse environment Products that contribute to a sustainable world A conviction to improve communities around us Competitive salary and benefits Not Ready To Apply? Stay connected by joining our network and we'll keep you informed about upcoming events and opportunities that match your interests. Talent Community

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description We are a seeking an experienced assembler who has the ability to perform a wide variety of electronic, electro-mechanical, mechanical or measurement product assembly operations on product components, assemblies or sub-assemblies. What you'll do The essential functions and key responsibilities for the position include, but are not limited to: Follow production drawings, procedures and work instructions in detail, understands and applies established workmanship practices for all facets of satellites, medical, defense/aerospace and high reliability industrial applications Ensure that quality checks are completed throughout the manufacturing process. Operate and set up Dage 400 and K & S 4124 Manual Wire Bonding equipment to perform thermosonic gold wire and aluminum wire bonding. Strong problem-solving abilities. Ability to work collaboratively with other teammates, quality control and process engineers to ensure product meets strict specifications. Attentiveness to details and adherence to safety and cleanliness protocols are essential. Assist with training as required. Perform Bond Pull, Die Shear and Sheer Strength Test as determined by Supervisor. Delicate hand assembly of electronics devices using solder, epoxy, and wire bonding techniques specifically under the microscopes. Inspect completed work to quality requirements. What you need Possess excellent manual dexterity, manufacturing knowledge. Experience with small parts, small hand tools, equipment, and microscope. Ability to read and work from engineer drawings, work instructions and bills of material to understand the required parts and steps needed to complete the assigned assembly. Possess a solid, quality minded work ethic and a strong attention to detail with a strong desire for precision and accuracy when executing job duties. Knowledge of Foreign Object Debris (FOD control.) Must be able to work overtime if required, on short notice. High School Diploma and basic computer skills are a necessity. A minimum of 2- 3 years of experience in a manufacturing assembly, production environment, or cleanroom experience is essential. What we offer Competitive pay and comprehensive health benefits 401(k) with company match and retirement plans Paid time off and flexible work arrangements Professional development and training opportunities Employee wellness programs and assistance resources A collaborative environment working on mission-critical technology What happens next Apply online through Teledyne's careers page. If your qualifications align, our team will contact you for interviews and guide you through the process. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Are you passionate about chemistry and eager to apply your knowledge in a real-world manufacturing environment? We're looking for a Quality Engineering Intern to join our Quality Lab team. In this role, you'll help improve our quality processes through chemical analysis, experimentation, and innovative thinking. This is a great opportunity for someone who enjoys hands-on work, problem-solving, and making a measurable impact. What You'll Do: Assist in analyzing materials and products using chemical testing methods Support the development and refinement of quality control procedures Collaborate with the Quality Engineering team to identify process improvements Conduct experiments and trials to evaluate new materials or process changes Help maintain lab equipment and ensure accurate documentation of results Bring fresh ideas and a chemistry-based perspective to ongoing quality initiatives Participate in cross-functional meetings and contribute to continuous improvement efforts Requirements Currently pursuing a degree in Chemistry, Chemical Engineering, or a related field Strong foundation in chemical principles and lab techniques Analytical mindset with attention to detail Excellent communication and collaboration skills Ability to work independently and as part of a team Curiosity and creativity in applying chemistry to solve real-world problems Why Join Us? Gain hands-on experience in a professional quality lab Apply your chemistry knowledge to improve real manufacturing processes Work alongside experienced engineers and quality professionals Be part of a company that values innovation, learning, and continuous improvement BENEFITS: • 1 hour of PTO per 40 hours worked • On-Demand Pay - Access your earned pay prior to payday • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Salary Description $16-$18 per hour

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Join Teledyne Controls and keep aviation safe! For decades, we've delivered advanced avionics solutions trusted by airlines worldwide. As an Manufacturing Technician, you'll ensure compliance with FAA Part 145 regulations by inspecting, testing, and repairing equipment used on aircraft. What you'll do Troubleshoot electronic circuits and mechanical systems using test equipment (ATE, oscilloscopes, multi-meters, etc.) Perform maintenance, preventative maintenance, and modifications on avionics equipment Conduct alignments, repairs, and testing to meet productivity standards Inspect maintenance articles and replacement materials for defects Perform soldering rework to IPC J-STD specifications Comply with FAA regulations, ISO procedures, and company policies What you need Associate degree in aviation electronics or related field, or equivalent experience (required) 0-2 years of electronic technician experience (required) Ability to troubleshoot to board/component level (required) Ability to read and interpret schematics, wiring diagrams, and maintenance manuals (required) Must read, write, and speak English (FAA requirement) (required) Must be a U.S. Person (includes U.S. citizens, lawful permanent residents, refugees, and asylees) (required) IPC-J-STD-001 soldering experience (advantage) Understanding of FAA regulations (advantage) What we offer Competitive pay and comprehensive health benefits 401(k) with company match and retirement plans Paid time off and flexible work arrangements Professional development and training opportunities Employee wellness programs and assistance resources A collaborative environment focused on safety and innovation This is an FAA Safety Sensitive position which requires new hires under this program to pass a pre-employment FAA Drug screening. Employees under this program will be subject to random FAA Drug and Alcohol testing throughout their employment at Teledyne Controls. What happens next Apply online through Teledyne's careers page. If your qualifications align, our team will contact you for interviews and guide you through the FAA compliance process. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Employment is contingent on background checks and compliance with applicable regulations. Salary Range: $37,200.00-$49,600.000 Pay Transparency The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne conducts background checks on qualified applicants who receive a conditional offer of employment in accordance with applicable laws, regulations and ordinances. Background checks may include, but are not limited to, education verification, employment history and verification, criminal convictions, Motor Vehicle Report (MVR & driving history), reference check, credit checks/credit history and drug testing. All qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

We're looking for a detail-oriented and driven Engineering Intern to join our cabinet production engineering team. This internship offers hands-on experience in programming, CAD design, process documentation, and data validation-all while contributing to real-world projects that impact production efficiency and product quality. If you're passionate about manufacturing, eager to learn, and ready to make a difference, we'd love to have you on board. Key Responsibilities Develop and test programs for machines used in cabinet manufacturing Assist in troubleshooting and validating engineering drawings, product designs, and software programs Create and maintain SOPs, process flowcharts, and documentation for departmental workflows Design and update 2D and 3D CAD blocks, including hardware components Review and correct bill-of-materials (BOMs) and resolve material inconsistencies in engineering software Evaluate and verify the output of a new AI system designed to enhance production efficiency Perform entry-level engineering tasks and write formulas within the Microvellum engineering platform Conduct data entry and support data integrity across multiple software systems Major Projects You'll Tackle Update and optimize CAD drawings; research more efficient methods for CAD updates Research and recommend improved hardware components for cabinet production Review product lines for inconsistencies and deficiencies using Excel Validate hardware functionality and ensure compatibility with product designs Write machine programs to support material processing Analyze product line variations and recommend improvements Requirements Currently pursuing or recently completed a degree in Mechanical, Industrial, or Manufacturing Engineering (or related field) Familiarity with CAD software (AutoCAD, SolidWorks, or similar) Basic understanding of manufacturing processes and engineering documentation Strong analytical and problem-solving skills Detail-oriented with excellent organizational abilities Experience with Microvellum or similar engineering software is a plus Comfortable working with data and performing quality checks BENEFITS: • On-Demand Pay - Access your earned pay prior to payday • PTO- 1 hour for every 40 worked • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Salary Description $16-$18 per hour

We are seeking a detail-oriented and motivated CAD Engineering Technician Intern to join our Millwork Solutions Engineering team. This internship offers hands-on experience in drafting and modeling custom millwork components using industry-standard tools like Microvellum and Autodesk Inventor. You'll work closely with experienced engineers and designers to support the creation of precise 3D CAD models and technical documentation for production. KEY RESPONSIBILITIES: Create and modify detailed 3D CAD models and 2D drawings using Microvellum and Inventor. Assist in the development of custom millwork designs and engineering solutions. Interpret architectural and engineering drawings to produce accurate shop drawings. Collaborate with engineers and production teams to ensure design intent and manufacturability. Maintain drawing standards and file organization within the engineering database. Support the documentation of design processes and best practices. Requirements Currently pursuing or recently completed a degree or certification in Drafting, CAD Technology, Mechanical Engineering Technology, or a related field. Proficiency in Autodesk Inventor and familiarity with Microvellum or similar woodworking/CAD software. Strong attention to detail and ability to follow technical specifications. Basic understanding of millwork or cabinetry manufacturing is a plus. Excellent communication and organizational skills. BENEFITS: • 1 hour of PTO per 40 hours worked • On-Demand Pay - Access your earned pay prior to payday • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Salary Description $16-$18 per hour