National Railroad Passenger Corporation jobs in Los Angeles, CA

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: Define and develop RF system architectures for radar and advanced sensing applications. Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. Conduct trade studies and system optimization to balance performance, cost, and schedule. Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. Perform root cause analysis of system performance issues and recommend design changes. Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. Demonstrated experience deriving and validating system-level RF budgets. Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: Experience in phased-array architectures and beamforming. Knowledge of military/aerospace standards and environmental testing. Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Imagine a career that truly takes you places, where you get to travel and meet new people every day along the journey. For 100 years, our Greyhound Drivers have been the heart and soul of our company, serving the transportation needs of communities across the nation. Do you enjoy meeting new people and have a passion for safety and the customer experience? Interested in a job that pays you to travel? Come join us in serving America's passengers as we continue our legacy of putting the wheels in motion. Responsibilities: Operate a bus in a safe and efficient manner, adhering to traffic laws and safety regulations Follow designated routes and schedules, making necessary adjustments when required Ensure the safety and comfort of passengers by providing assistance when needed and maintaining a clean bus Perform pre-trip and post-trip inspections to ensure the bus is in good working condition Maintain a clean and orderly bus, including regular cleaning of the interior and exterior Report any maintenance issues, accidents, or incidents to the appropriate authorities Assist passengers with boarding, exiting, and securing their personal belongings Follow emergency procedures and respond to incidents in accordance with company protocols Keep records of miles driven, fuel usage, and other required documentation Stay updated on company policies and safety procedures Qualifications: Fully Licensed with Class A or B Commercial Driver's License (CDL) Possesses Passenger 16+ endorsement and no air brake restriction 22 years of age or older Able to pass a DOT physical and pre-employment drug screen Full-time employment consideration only Ability to work varied schedule based on regional driver needs Benefits Medical, Dental, and Vision Plans 401K with company-matched contributions Life Insurance Paid Vacation, Holidays, and Sick Days Free Travel Passes Annual Uniform Allowance Driver Union membership & representation Career Advancement Opportunities Compensation Range: USD $29.40 - USD $31.28 /Hr.

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees. Current benefits being offered include: Competitive Wages. The anticipated starting pay range for the position is $25 to $30 but is commensurate with skills and related experience, Health/Dental/Vision/Prescription Drug Plan with a company contribution to each, Health Savings Accounts and Flexible Spending Accounts, 401K Retirement Savings Plan: Crown matches 100% of the first 4% of your eligible pay you contribute to the plan. You are always 100% vested in the company matching contributions. Company paid Life and Disability Benefits as well as optional supplemental term life insurance offerings, Paid Parental Leave, 9 Paid Holidays, Paid Vacation accrued at a rate based on length of service and position, Paid Sick Leave, Birthday Pay for Non-Exempt employees, Tuition Reimbursement up to $5,250 per calendar year, and much more. EOE Veterans/Disabilities

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Springfield MA - Industrial Electrician The Opportunity: We are searching for a skilled Industrial Electrician to maintain, troubleshoot, and repair electrical and mechanical industrial equipment in our corrugated packaging plant in Springfield, MA. The successful candidate will be qualified to troubleshoot and repair both electrical and mechanical components on large scale production machinery, participate in PMs, support continuous improvement initiatives, and adhere to all safety regulations. You will provide resolutions to mechanical and electrical problems on a wide variety of paper and packaging machinery to keep our plant running at peak performance. What We Offer: A career with a Fortune 500 company where Sustainability, Safety and Inclusion are business drivers and foundational elements of your daily work. Opportunities to advance and learn alongside accomplished leaders in the Corrugated Packaging industry. If you live for machine up time, come join our best-in-class maintenance team! Opportunities to advance and learn alongside accomplished leaders in the Corrugated Packaging industry. An attractive rate of pay and top-tier benefits, reflecting skills, competencies and potential. The rate for this role is up to $40 an hour. You will work in a collaborative work environment where safety is our priority. How You Will Impact Smurfit Westrock: Focus on maintaining equipment in working order through preventive maintenance and troubleshooting mechanical and electrical failures in a fast-paced environment. Enforce plant safety regulations and encourage employees to become safety conscious. Perform scheduled preventive maintenance on electrical equipment, including motors, motor control centers (MCCs), transformers, switches, and wiring. Diagnose, troubleshoot, and repair electrical faults in complex machinery such as corrugators, printing presses, die cutters, and material handling systems. Troubleshoot and maintain Programmable Logic Controllers (PLCs) (e.g., Allen-Bradley, Siemens) and Human-Machine Interfaces (HMIs). Install, maintain, and calibrate various sensors, transducers, and measuring instruments. Ensure all electrical installations and repairs comply with the National Electrical Code (NEC), local codes, and company standards. Strictly adhere to Lockout/Tagout (LOTO) procedures and other plant safety policies. Maintain and repair high-voltage equipment and control systems. Keep accurate records of all maintenance work performed, parts used, and system documentation. Assist with the installation and commissioning of new production equipment and control systems. Collaborate with mechanical, hydraulic, and pneumatic technicians to resolve complex operational issues. Participate in root cause analysis of failures to implement corrective actions and improve machine reliability. Provide support for mechanical maintenance tasks as needed to ensure production uptime including predictive and preventative maintenance. What You Need to Succeed: Minimum of 3-5 years of experience as an Industrial Electrician, preferably in a manufacturing environment (corrugated, paper, or heavy industry experience is a significant plus). Proven experience working with 480V three-phase systems and various control voltages. Proficiency with electrical test equipment (e.g., multimeters, ammeters, megohmmeters). Expert knowledge of electrical schematics, blueprints, and wiring diagrams. Strong aptitude for troubleshooting and programming PLCs and Variable Frequency Drives (VFDs). Massachusetts Electrical license or the equivalent certification Willingness to work on both mechanical and electrical projects. Excellent safety awareness and commitment to safe work practices. Strong mechanical aptitude and problem-solving skills. Ability to work independently, manage time effectively, and handle emergency repairs under pressure. Excellent communication skills High School Diploma or equivalent required; college degree or technical certification is a plus. Physical Requirements: Ability to stand, walk, climb, and lift up to 50 lbs. regularly. Ability to work in a loud, fast-paced industrial environment, which may include exposure to heat, dust, and chemicals. This role is primarily the first shift; however, the successful candidate must be willing to work shifts, weekends, and on-call as required to support operations. The starting rate is $34-40 per hour based on experience, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 10 days of paid vacation will be granted, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ******************************** and the application window is expected to close by 12/20/25 #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

Company: Horizon Air The Team: Our airport teams work together to move guests and their belongings from curb to cabin, creating remarkable experiences along the way. Whether customer-facing or behind the scenes, we want to hear from you if you can be welcoming to people from all walks of life, think on your feet, and manage a flexible schedule. In return, you'll receive a competitive total rewards package, professional development opportunities, and other benefits that are all designed to take you places. Role Summary: The Ramp & Customer Service Agent is responsible for above and below wing tasks which include guest interactions and ramp functions. Key Duties: Assist guests with travel needs (e.g., answering inquiries, baggage, ticketing, checking-in passengers and boarding flights) in a fast-paced environment. Work outdoors in all types of weather conditions while performing below wing functions (e.g., transports baggage and cargo, loads and offloads luggage and cargo, aircraft marshaling, pushes back the aircraft and aircraft deicing). Performs aircraft grooming and security searches. Perform boarding and gate duties (e.g., assisting and directing guests, making announcements, process standby's and upgrade requests). Process and secure guest luggage. Files and maintains luggage claims as necessary including damaged, delayed and pilferage. Loads and offloads luggage and cargo with the use of conveyor belts. At the direction of management, may be assigned to perform duties of varying capacities to ensure complete guest satisfaction. Performs other duties as assigned. Day in the Life: To preview of a Day in the Life of a Horizon Air Customer Service Agent press play on the video above. If the above video does not work try using the following link: Day in the Life - Horizon CSA Job-Specific Experience, Education & Skills: Required Strong written and verbal communication skills. Ability to juggle multiple tasks in a fast-paced environment. Must have a valid unexpired driver's license issued by a US state, a US territory or the District of Columbia. Ability to learn and operate a computerized reservation system. Typing speed of at least 25 WPM. Ability to consistently lift 50 pounds. Must be able to stand for long periods of time. Must be able to bend, stoop, squat, reach and grasp. Ability to perform basic mathematics. Ability to work a flexible schedule including nights, weekends and holidays. Ability to participate in paid training that may require overnight travel. Depending on work location, ability to obtain USPS Mail Handling Certification. Ability to obtain airport security clearance. Ability to communicate in English. High school diploma or equivalent. Minimum age of 18. Must be authorized to work in the U.S. Preferred: A minimum of 1 year of customer service or community service experience. Job-Specific Leadership Expectations: Embody our values to own safety, do the right thing, be caring and kind, and deliver performance. Starting Rate: USD $16.24/Hr. Total Rewards: Alaska Airlines, Hawaiian Airlines and Horizon Air pay and benefits can vary by company, location, number of regularly scheduled hours worked, length of employment, and employment status. Free stand-by travel privileges on Alaska Airlines, Hawaiian Airlines & Horizon Air Comprehensive well-being programs including medical, dental and vision benefits Generous 401k match program Quarterly and annual bonus plans Generous holiday and paid time off For more information about Alaska/Hawaiian/Horizon Total Rewards please visit our career site and view benefits. Airport SIDA Badge Requirements: Important notification for employees working at an airport or maintenance hangar: Employees will be required to obtain a SIDA badge provided by the airport authority and maintain good standing in order to keep their SIDA badge. Review the SIDA Badge Requirements document for a comprehensive overview. If an employee does not qualify for a SIDA badge or has their SIDA badge pulled from them, the employee will be terminated. Regulatory Information: Equal Employment Opportunity Policy Statement It is the policy of Alaska Airlines, Hawaiian Airlines and Horizon Air to comply with all applicable federal, state and local laws governing nondiscrimination in employment and to ensure equal opportunity in all terms, conditions, and benefits of employment or potential employment. We also prohibit discrimination and harassment against any employee or applicant for employment because of race, color, religion, sex, national origin, age, disability, veteran status, genetic information and other legally protected categories. We have established an EEO Compliance Program under Section 503 of the Rehabilitation Act of 1973 (“Section 503”) and the Vietnam Era Veteran's Readjustment Assistance Act of 1974 (“VEVRAA”). All applicants and employees are treated without regard to their race, color, religion, sex, national origin, disability or protected veteran status. In addition, we have established an audit and reporting system to allow for effective measurement of its equal employment opportunity activities. To implement this policy, we will: (1) Recruit, hire, train and promote qualified persons in all job titles, without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information and any other legally protected categories; (2) Ensure that employment decisions are based only on valid job requirements; and (3) Ensure that all personnel actions and employment activities such as compensation, benefits, promotions, layoffs, return from layoff, Alaska Airlines, Hawaiian Airlines and Horizon Air sponsored programs, and tuition assistance will be administered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information and other legally protected categories. Employees and applicants for employment will not be subjected to harassment, intimidation, threats, coercion or discrimination because they have engaged or may engage in (1) filing a complaint, (2) opposing any act or practice made unlawful by, or exercising any other right protected by, any Federal, State or local law requiring equal opportunity, including Section 503 and the equal opportunity provisions of VEVRAA, or (3) assisting or participating in any investigation, compliance evaluation, hearing, or any other activity related to the administration of any Federal, State or local law requiring equal opportunity, including Section 503 and the equal opportunity provisions of VEVRAA. Government Contractor & Department of Transportation (DOT) Regulations Alaska Airlines, Hawaiian Airlines & Horizon Air are regulated by the Department of Transportation (DOT - regulations, 49 CFR part 40) and all applicants are advised that post-offer and/or pre-employment drug testing will be conducted to determine the presence of marijuana, cocaine, opioids, phencyclidine (PCP) and amphetamines or a metabolite of these drugs prior to any offer or employment or transfer into a safety-sensitive position. Failure to submit to testing or positive indications of drug use will render the applicant ineligible for employment with Alaska Airlines/Hawaiian Airlines/Horizon Air and any employment offer will be withdrawn. FLSA Status: Non-Exempt Employment Type: Part-Time Regular/Temporary: Regular Requisition Type: Frontline Location: Eugene, OR - Airport Featured Job: 0 A:: Y - T3 L:: #LI-B

JOB SUMMARY/PURPOSE Assists pharmacists in medication preparation and labeling activities. Performs a broad range of technical support functions under the supervision of a registered pharmacist. DEPARTMENT DESCRIPTION Samaritan Pharmacy-Lincoln City is a community pharmacy located next to Samaritan North Lincoln Hospital. The pharmacy is open to any member of the public. The primary role of this pharmacy is to dispense community patient prescriptions. They also offer immunizations, medication management services, and discharge medications to bedside. The pharmacy is staffed by experienced pharmacists and pharmacy technicians who are dedicated to patient care. EXPERIENCE/EDUCATION/QUALIFICATIONS High school diploma or equivalent required. One (1) of the following required: Current unencumbered Certified Oregon Pharmacy Technician License. Currently enrolled first year PharmD student in good standing with an accredited pharmacy school and current unencumbered Oregon Board of Pharmacy Intern license. Successful completion of Medical Pharmacy Technician course preferred. All job offers are contingent upon the candidate passing a pre-employment/post offer drug screen. KNOWLEDGE/SKILLS/ABILITIES Communication - Effective written and oral communication skills to explain complex issues, exchange information between team members, and tactfully discuss issues. Ability to perform group presentations and listen to and understand complex information and ideas. Computer Literacy - Knowledge of electronic equipment and computer hardware, software, and applications. Ability to operate applications, enter data, and process information. Customer Service - Knowledge of principles and processes for providing customer service. This includes customer needs assessment, meeting quality standards for services and evaluation of customer satisfaction. Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Time Management - Ability to organize, plan and prioritize work to complete within required time frames and to follow-up on pending issues. Ability to perform multiple tasks simultaneously and thrive in dynamic fast-paced environments and under pressure. Clerical - Knowledge of administrative and clerical procedures and systems such as word processing, managing files and records, designing forms, and other office procedures and terminology. Specialty Pharmacy Technician (if applicable): Ability to read, understand, translate and enter prescription orders into the pharmacy management system. Basic working knowledge of diseases and the drugs that the pharmacy dispenses. PHYSICAL DEMANDS Rarely (1 - 10% of the time) Occasionally (11 - 33% of the time) Frequently (34 - 66% of the time) Continually (67 - 100% of the time) WALK - INCLINE LIFT (Floor to Waist: 0"-36") 40 - 60 Lbs LIFT (Knee to chest: 24"-54") 20 - 40 Lbs LIFT (Knee to chest: 24"-54") 40 - 60 Lbs CARRY 2-handed, 40 - 60 pounds SQUAT Static (hold >30 sec) KNEEL (on knees) PUSH (40 - 60 pounds force) PULL (40 - 60 pounds force) WALK - LEVEL SURFACE LIFT (Floor to Waist: 0"-36") 0 - 20 Lbs LIFT (Floor to Waist: 0"-36") 20 - 40 Lbs LIFT (Knee to chest: 24"-54") 0 - 20 Lbs CARRY 2-handed, 20 - 40 pounds SQUAT Repetitive BEND FORWARD at waist PUSH (0 - 20 pounds force) PUSH (20 - 40 pounds force) PULL (0 - 20 pounds force) PULL (20 - 40 pounds force) SIT STAND CLIMB - STAIRS LIFT (Waist to Eye: up to 54") 0 - 20 Lbs LIFT (Overhead: 54" and above) 0 - 20 Lbs CARRY 1-handed, 0 - 20 pounds CARRY 2-handed, 0 - 20 pounds ROTATE TRUNK Sitting ROTATE TRUNK Standing REACH - Upward PINCH Fingers GRASP Hand/Fist REACH - Forward MANUAL DEXTERITY Hands/wrists FINGER DEXTERITY

Hogan Transportation is a 100-year-old full-service, multi-faceted transportation company operating throughout North America with a tradition of unparalleled, personalized service to clients, utilizing first-class equipment and advanced technology. We have a need for a Service Manager to help us meet our clients' needs. This is an awesome opportunity for the right person to make his or her mark with a growing, successful company! Do you have the knowledge, skills, abilities and background to manage the activities of our shop? Do you have 3 years' management experience and the ability to build a well-run shop? Do you have 5 years' experience with truck maintenance? Are you passionate about ensuring quality standards and deadlines are met and procedures are followed? Do you have experience ensuring compliance with DOT standards? Do you have the savvy to deal with customers and ensure high quality customer service? Is ensuring the safety of your employees a top priority for you? Do you welcome the opportunity to be accountable for a shop's performance? Do you want to join a company that has been in business for over 100 years?!... and is continuing to expand?!... If you answered "Yes" to these questions, our Service Manager opening may be the perfect fit for you! This position is integral to Hogan fulfilling its goal to be recognized as the most respected transportation provider in the industry by continually focusing on providing the highest quality experience possible for our customers, employees, and strategic partners. This position is key to supporting our continued growth and success!... If interested, fill out the basic information and click Apply!

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees. Current benefits being offered include: Competitive Wages. The anticipated starting pay range for the position is $33-35 per hour but is commensurate with skills and related experience, Health/Dental/Vision/Prescription Drug Plan with a company contribution to each, Health Savings Accounts and Flexible Spending Accounts, 401K Retirement Savings Plan: Crown matches 100% of the first 4% of your eligible pay you contribute to the plan. You are always 100% vested in the company matching contributions. Company paid Life and Disability Benefits as well as optional supplemental term life insurance offerings, Paid Parental Leave, 9 Paid Holidays, Paid Vacation accrued at a rate based on length of service and position, Paid Sick Leave, Birthday Pay for Non-Exempt employees, Tuition Reimbursement up to $5,250 per calendar year, and much more. Crown also offers Service Technicians: Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities We will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including California AB-1008 “Ban the Box”, San Francisco's Fair Chance Ordinance and the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance.

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking a Fleet Maintenance Manager who will be a dynamic, multi-task-oriented senior professional to manage all day-to-day maintenance aspects of this fixed route and trolley operation. The Fleet Maintenance Manager will ensure that all contractual requirements are achieved, and duties included will consist of daily, weekly, monthly and annual reports. The Fleet Maintenance Manager must be able to properly manage a budget for the maintenance program. Qualifications: Talent Requirements: The Maintenance Manager shall have a minimum of five (5) years of experience in managing the maintenance of a heavy-duty bus or truck fleet; two (2) years of experience in maintaining and/or managing the maintenance of vehicles in a fixed route. Trolley maintenance experience is a plus. Must possess in-depth knowledge of mechanical maintenance and repair methods and practices, strong knowledge of gas, diesel and electric vehicle systems, and proficiency with maintenance management software. The qualified candidate will have operational and working knowledge of gas, diesel and electric vehicle systems and demonstrated experience through training and work experience maintenance of major components and vehicle systems. The Maintenance Manager shall have experience in supervising the work of other maintenance personnel, ranging from mechanics, parts clerks, fueler/washers, etc.. Previous passenger transportation in the current project or a similar environment preferred. Must be able to manage and interface with the client. Must have the ability to track and control parts inventories, vendors and suppliers. Must be able to properly prioritize, implement and manage work schedules, projects, and assignments. Must be able to manage the financial/accounting aspects of a fleet maintenance operation. Must be able to communicate effectively with all levels of staff in written and oral formats. Must have computer skills, including word processing, spreadsheets and Microsoft outlook. Solid knowledge of managing audits, PM schedules. Manager shall be the equivalent of a journeyman mechanic. Must display initiative, professionalism, candor and tact at all times. ASE or manufacturer's certifications a plus. Starting salary range: $100,000 - $118,000 MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Pay Range: (Specific to OHI,DEL,NY,CA,CO,WA,MD,CT,IL,NV,,KY,MI,NJ,ME,MO,MA,MT) $29.90 - $36.21 Hourly About Brink's: The Brink's Company (NYSE:BCO) is a leading global provider of cash and valuables management, digital retail solutions, and ATM managed services. Our customers include financial institutions, retailers, government agencies, mints, jewelers, and other commercial operations. Our network of operations in 51 countries serves customers in more than 100 countries. We believe in building partnerships that secure commerce and doing that requires fostering an engaged culture that values people with different backgrounds, ideas, and perspectives. We build a sense of belonging, so all employees feel respected, safe, and valued, and we provide equal opportunity to participate and grow. Job Description Who We Are: Brink's U.S., a division of Brink's Incorporated, is the trusted leader in armored transportation, currency processing, ATM services, and secure logistics for banks, retailers, and government clients. We take pride in offering our employees meaningful career growth and advancement opportunities. You'll be working in a secure, monitored, warehouse environment where safety and accuracy matter most. As an Armed Transport Guard- LLV, you'll be the face of our brand-safely transporting cash and valuables between businesses and banks. You'll operate in a secure, team-driven environment where your focus on safety, accuracy, and customer service keeps the wheels of the economy turning. Key Responsibilities: Safeguard team members, vehicles, and valuables always Transport cash and assets to and from client locations Service and maintain the integrity of ATM services Remain alert and ready to respond to security threats or safety issues Accurately reconcile deposits and receipts Follow all protocols for handling firearms and high-value assets Deliver exceptional customer service Minimum Qualifications: At least 21 years of age Valid driver's license and clean driving record Ability to lift 50+ lbs. Meet all Department of Transportation requirements California Issued Guard Card and BSIS Firearm permit Pass background check, drug screening, and training Preferred Qualifications: Experience in armed security or transportation Military background Individuals that worked in a logistics distribution center Chauffeur license (IN, LA, MI only) Benefits & Perks: A strong, team-oriented culture Eligible for benefits after 30 days of employment! Medical, Dental, Vision, 401K, Paid Holidays & Vacation Hours (For Full Time positions). Link to our benefits: brinksbenefits.com Paid training and career growth within the organization Company issued uniforms, weapons & bulletproof vests (For applicable positions) Brink's is an equal opportunity employer and is committed to providing a workplace free of discrimination and harassment. We consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fostering an inclusive environment where everyone feels respected, valued, and empowered to succeed. What's Next? Thank you for considering applying for a job at Brink's. To be considered for this position, you must complete the entire application process, which includes answering all prescreening questions and providing your eSignature. Upon completion of the application process, you will receive an email confirming that we have received your application. We will review all candidates and notify you of your status should we deem you fit for a job. Thank you again for your interest in a career at Brink's. For more information about future career opportunities, join our talent network, like our Facebook page or Follow us on X. Brink's is an equal opportunity/affirmative action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, marital status, protected veteran status, sexual orientation, gender identity, genetic information, or history or any other characteristic protected by law. Brink's is also committed to providing a drug-free workplace. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class.

Saab Inc., Autonomous and Undersea Systems division is seeking an innovative and experienced Senior Staff Electrical Engineer to support our growing team working on Autonomous Underwater Vehicles (AUVs) and Remotely Operated Vehicles (ROVs). This position spans many Electrical Engineering topics and is the perfect position for anyone looking at a wide array of design challenges. Our AUVs, UUVs, and ROVs span AC power (shore and charging equipment), DC power (battery systems and conversion), sensor integration, and electromechanical (propulsion, motors, servos, actuators) integration. This is a hands-on position with the chance to build, test, and integrate the designs you work on. This position will be remote or hybrid to start, but will ultimately be based out of our new Bristol, RI facility that is opening in early 2026. An Electrical Engineering position for anyone interested in leading, designing, developing, and/or modifying AC, DC, linear, analog, digital, acoustic, or sensor designs in subsea applications. This person will lead design approaches and parameters. They will analyze operating data, develop and conduct tests, and draw conclusions or make design decisions based on results. They will be responsible for selecting components and equipment based on requirements, specifications, and reliability. They will also support the interdisciplinary development team with their expertise to guide System level decisions. Responsibilities: Lead electrical engineering support and guidance for AUV/ROV systems and present technical concepts regarding product design and performance. Coordinate with Systems, Software, Mechanical, Quality, and Manufacturing as part of a team designing AUV/ROV systems. Technically execute the research and development of new circuit card designs and electromechanical assemblies. Lead and execute functional analysis, evaluation, and optimization of product designs. Present technical results and content to internal and external customers, tailored to the customer audience. Provide technical support to key subcontractors and suppliers. Create and maintain power and endurance budgets through development phases. Provide technical support for manufacturing related matters. Lead design verification efforts. Lead cost/benefit trade-off analysis and feasibility studies. Lead electrical related failure analysis of hardware. Contribute to system level design considerations and trade-offs where many engineering disciplines are concerned. Compensation Range: $124,200 - $161,500 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Skills And Experience: Bachelor of Science Degree in Electrical Engineering with 15+ years of experience or Master of Science Degree in Electrical Engineering with 13+ years of experience. Experience using industry standard electrical engineering design tools (Altium, SPICE, MATLAB) Product development experience demonstrating a strong engineering aptitude and good problem-solving skills with underwater vehicles and devices. Demonstrated experience resolving issues during design, development and execution of electrical engineering activities. Strong interpersonal and group communication skills. Proficiency with MS Office software applications. Experience to Earned Value (EV), Cost Account Management (CAM), and Integrated Master Schedule (IMS) development and tracking Must hold or be able to obtain U.S. DoD SECRET security clearance. Ability to travel up to 15%, both international and domestic. Proficient at understanding requirements traceability in a model-based systems engineering environment. Desired Experience and Skills: Prior DoD industry experience Experience with designing and testing electronics in wet and subsea environment Experience with Altium, SPICE, and electrical systems in Matlab Familiarity with Mil Standards, ruggedized equipment design, and environmental test requirements Knowledge of printed circuit board (PCB) design Knowledge of design for EMI/EMC standards in military application Experience reading and creating schematics, wiring diagrams, and component data sheets Experience derating components and designing for reliability Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Master Electrician Shift: 3rd (11pm-7am) Pay: $44- $50.22/hr Position Summary: Primary duties include providing safe and timely electrical support, preventative maintenance, installation, service, repair, troubleshooting and resolution of multiple operating machines within a manufacturing industrial environment. The ideal candidate will have mechanical and electrical experience, a familiarity with hydraulics and pneumatics and have basic troubleshooting experience with proven ability of machine repair. How you will impact WestRock: Utilize electrical/mechanical skills to maintain machinery Contribute to a collaborative safety culture that drives results Provide rapid response to ensure seamless productivity. What you need to succeed: 2-3 years in trouble shooting industrial electrical control systems down to component level An operational knowledge of automated industrial machinery which includes; motors, servos, pumps, drives, relays, 3 phase-power, communication devices, industrial / electronic controls, and power transmission systems. A good understanding of hydraulic and pneumatic systems. Able to install and set up both A/C and D/C drives PLC trouble shooting and problem-solving ability with practical, mechanical & electrical aptitude. Must be able to read and interpret both electrical and mechanical drawings. Working knowledge of power transmission equipment and bearings. Basic welding skills preferred but not required. Familiar with pumps, both air and electric. Able to install and trouble shoot basic 3 phase motor control circuits Some knowledge of the various types of sensors and limit switches Familiar with computers and Microsoft software. Strong written and verbal communication skills. Ability to work independently in a mature and professional manner. Ability to work flexible hours, overtime High school diploma or equivalent Military training and or Technical School preferred What we offer: Comprehensive benefits package- including but not limited to medical, dental, vision, 401K, and short-term disability coverage. Corporate culture based on integrity, respect, accountability, and excellence Comprehensive training with numerous learning and development opportunities A career with a global packaging company where Safety, Sustainability, and Inclusion are business drivers and foundational elements of the daily work. The starting range is $44/hr - $50.22h r, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 5 days of paid vacation will be granted after 1 year of service, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ******************************** and the application window is expected to close by December 21 2025. #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here . Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities

Aircraft Maintenance Technician (AMT) IMMEDIATELY HIRING! A&P Mechanic- Rotor Wing FULL-TIME Opportunity in Rayville, LA Starting Salary: $70,356 - $102,617 annually (including 10% geo modifier) IA Stipend 2,080 Sign-On Bonus 12,500 We're hiring an Aircraft Maintenance Technician (AMT) responsible for the overall maintenance and safety of our fleet within Air Evac Lifeteam. This technician will be qualified to support our airframe. This is a key role to ensure our team can safely maintain and deliver timely and high-quality transportation services, care and customer service to patients. Responsibilities Aircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. Manage inventory checks to ensure stock of supplies and equipment, regularly update the equipment tracking log, place replacement requests when necessary and document part expenditures. Clearly document service paperwork and FAA information as required and adhere to policies and procedures while complying with the company's information security standards. Take pride in sustaining a safe and clean working environment for the aircraft maintenance team and flight crew. Use appropriate communication methods to help facilitate coordination of efforts between departments, vendors and team members. Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow AMTs and operations team. Minimum Required Qualifications Two (2) years turbine powered helicopter experience Valid Airframe and Powerplant (A&P) license High School diploma or GED equivalent Valid State issued Driver's License Federal Aviation Regulations knowledge EMS systems, Aircraft maintenance systems, records and maintenance support and planning Ability to work a flexible schedule including overtime and 24/7 on-call rotations. Must be acceptable in accordance with the FAA drug and alcohol testing program. Must be able to push and/or pull 100+ lbs. Must be able to lift and/or carry up to 50 lbs. Preferred Qualifications Bell 206, Bell 407, EC130, EC135 maintenance experience FAA Inspection Authorization Certificate Related experience under CFR Part 135 Autopilot maintenance experience Avionics and electrical repair experience Why Choose Air Evac Lifeteam: As a national leader in air ambulance, Air Evac Lifeteam is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Check out our careers site benefits page to learn more about our benefit options.

The pharmacy team at Samaritan Health Services is looking for a Traveling Pharmacy Technician to assist pharmacists in medication preparation and labeling activities. Other duties include performing a broad range of technical support functions under the supervision of a registered pharmacist. This position is eligible for a $3.00 per hour float differential to be paid on hours worked. Travel will be between Samaritan Hospital Pharmacy sites in the mid-Willamette Valley and central Oregon Coast. Samaritan Health Services pharmacies are staffed by experienced pharmacists and pharmacy technicians who are the area's leading experts on thousands of medications. They make important decisions that help optimize a patient's drug therapy and are dedicated to patient care. As a Pharmacy Technician, you are required to hold a high school diploma or equivalent, as well as either an unencumbered Certified Oregon Pharmacy Technician License or be currently enrolled as a first year PharmD student in good standing with an accredited pharmacy school and current unencumbered Oregon Board of Pharmacy Intern license. Successful completion of Medical Pharmacy Technician course is preferred. Thousands of your friends and neighbors make up Samaritan Health Services. We're a not-for-profit network of hospitals, clinics, health services and health plans caring for more than 250,000 residents in the mid-Willamette Valley and central Oregon Coast. We work together to provide innovative medicine and world-class quality in a way that supports the values of the communities we serve. That includes caring for all people, regardless of your ability to pay. Important knowledge, skills and abilities for this position are listed below: Communication - Effective written and oral communication skills to explain complex issues, exchange information between team members, and tactfully discuss issues. Ability to perform group presentations and listen to and understand complex information and ideas. Computer Literacy - Knowledge of electronic equipment, computer hardware and software, including applications and programming. Ability to operate applications, write software, set up functions, enter data, and manipulate and process information. Customer Service - Knowledge of principles and processes for providing customer service. This includes customer needs assessment, meeting quality standards for services and evaluation of customer satisfaction. Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Time Management - Ability to organize, plan and prioritize work to complete within required time frames and to follow-up on pending issues. Ability to perform multiple tasks simultaneously and thrive in dynamic fast-paced environments and under pressure. Clerical - Knowledge of administrative and clerical procedures and systems such as word processing, managing files and records, designing forms, and other office procedures and terminology. EXPERIENCE/EDUCATION/QUALIFICATIONS High school diploma or equivalent required. One (1) of the following required: Current unencumbered Certified Oregon Pharmacy Technician License. Currently enrolled first year PharmD student in good standing with an accredited pharmacy school and current unencumbered Oregon Board of Pharmacy Intern license. Successful completion of Medical Pharmacy Technician course preferred. All job offers are contingent upon the candidate passing a pre-employment/post offer drug screen. KNOWLEDGE/SKILLS/ABILITIES Communication - Effective written and oral communication skills to explain complex issues, exchange information between team members, and tactfully discuss issues. Ability to perform group presentations and listen to and understand complex information and ideas. Computer Literacy - Knowledge of electronic equipment, computer hardware and software, including applications . Ability to operate applications, set up functions, enter data, and manipulate and process information. Customer Service - Knowledge of principles and processes for providing customer service. This includes customer needs assessment, meeting quality standards for services and evaluation of customer satisfaction. Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Time Management - Ability to organize, plan and prioritize work to complete within required time frames and to follow-up on pending issues. Ability to perform multiple tasks simultaneously and thrive in dynamic fast-paced environments and under pressure. Clerical - Knowledge of administrative and clerical procedures and systems such as word processing, managing files and records, designing forms, and other office procedures and terminology. Specialty Pharmacy Technician (if applicable): Ability to read, understand, translate and enter prescription orders into the pharmacy management system. Basic working knowledge of diseases and the drugs that the pharmacy dispenses. PHYSICAL DEMANDS Rarely (1 - 10% of the time) Occasionally (11 - 33% of the time) Frequently (34 - 66% of the time) Continually (67 - 100% of the time) WALK - INCLINE LIFT (Floor to Waist: 0"-36") 40 - 60 Lbs LIFT (Knee to chest: 24"-54") 20 - 40 Lbs LIFT (Knee to chest: 24"-54") 40 - 60 Lbs CARRY 2-handed, 40 - 60 pounds SQUAT Static (hold >30 sec) KNEEL (on knees) PUSH (40 - 60 pounds force) PULL (40 - 60 pounds force) WALK - LEVEL SURFACE LIFT (Floor to Waist: 0"-36") 0 - 20 Lbs LIFT (Floor to Waist: 0"-36") 20 - 40 Lbs LIFT (Knee to chest: 24"-54") 0 - 20 Lbs CARRY 2-handed, 20 - 40 pounds SQUAT Repetitive BEND FORWARD at waist PUSH (0 - 20 pounds force) PUSH (20 - 40 pounds force) PULL (0 - 20 pounds force) PULL (20 - 40 pounds force) SIT STAND CLIMB - STAIRS LIFT (Waist to Eye: up to 54") 0 - 20 Lbs LIFT (Overhead: 54" and above) 0 - 20 Lbs CARRY 1-handed, 0 - 20 pounds CARRY 2-handed, 0 - 20 pounds ROTATE TRUNK Sitting ROTATE TRUNK Standing REACH - Upward PINCH Fingers GRASP Hand/Fist REACH - Forward MANUAL DEXTERITY Hands/wrists FINGER DEXTERITY

We are seeking a Senior RF Engineer to design, develop, and test discreet transmit/receive (Tx/Rx) RF modules for advanced radar applications. The ideal candidate will have a strong background in RF circuit design, system integration, and performance optimization, with hands-on experience in taking designs from concept to production. Key Responsibilities: Design, simulate, and develop discreet RF Tx/Rx modules for radar systems. Conduct RF system-level analysis, link budget calculations, and trade-off studies. Select and integrate components such as mixers, amplifiers, oscillators, and filters. Perform schematic capture, PCB layout reviews, and work closely with layout engineers to ensure optimal high-frequency performance. Conduct laboratory testing, tuning, and validation of RF modules against specifications. Collaborate with cross-functional teams including firmware, mechanical, and systems engineering to ensure seamless product integration. Support troubleshooting and root cause analysis for performance anomalies. Maintain comprehensive documentation for design decisions, test results, and compliance requirements. Compensation Range: $99,100 - $128,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field. 5-8 years of experience in RF design, with a focus on radar or similar high-frequency applications (L,S,C, and X band). Proficiency in RF simulation tools (e.g., Keysight ADS, HFSS, CST, or similar). Proficiency in schematic capture and PCBA layout tools (e.g. Altium Designer, PADS, Allegro) Hands-on experience with RF test equipment (VNA, spectrum analyzers, signal generators, power meters). Solid understanding of RF/microwave circuit theory, impedance matching, noise figure, and gain optimization. Experience with PCB design for RF and microwave circuits. Familiarity with military or aerospace standards for RF systems is a plus. US Citizenship and ability to obtain/maintain a security clearance. Preferred Skills: Knowledge of phased-array radar architectures. Electronics packaging concepts Familiarity with thermal and mechanical considerations in high-frequency module packaging. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees. Current benefits being offered include: Competitive Wages. The anticipated starting pay range for the position is $33 but is commensurate with skills and related experience, Health/Dental/Vision/Prescription Drug Plan with a company contribution to each, Health Savings Accounts and Flexible Spending Accounts, 401K Retirement Savings Plan: Crown matches 100% of the first 4% of your eligible pay you contribute to the plan. You are always 100% vested in the company matching contributions. Company paid Life and Disability Benefits as well as optional supplemental term life insurance offerings, Paid Parental Leave, 9 Paid Holidays, Paid Vacation accrued at a rate based on length of service and position, Paid Sick Leave, Birthday Pay for Non-Exempt employees, Tuition Reimbursement up to $5,250 per calendar year, and much more. Crown also offers Service Technicians: Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities We will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including California AB-1008 “Ban the Box”, San Francisco's Fair Chance Ordinance and the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance.

At Orica, it's the power of our people that leads change and shapes our futures. Every day, all around the world, our people help mobilize vital resources essential to progress. Established in 1874, we have grown to become the world leader in mining and civil blasting with a diverse team of more than 13,000 across the world. From the production and supply of explosives, blasting systems, mining chemicals, and geotechnical monitoring to our cutting-edge digital solutions and comprehensive range of services, we sustainably mobilize the earth's resources. It's an exciting time to join us - we are shaping the future of mining through digital and automated technologies, embracing new ways of thinking, pioneering innovation, and reimagining the way we work. Orica has been recognized as one of the top companies for women to work for in the transportation industry by the Women in Trucking Association (WIT) in 2023 and 2024. Orica does not provide immigration-related sponsorship for this role. Do not apply for this role if you need Orica Immigration Sponsorship (e.g., H1-B, TN, STEM OPT, etc.) now or in the future. Please Note: This posting is intended to collect candidate information for Orica's talent pool and does not represent an immediate job opening. By completing your candidate profile, our recruiters will gain visibility into your background and may contact you for future opportunities that align with your experience and interests. To stay informed about new openings, we also encourage you to create a Job Alert on our career site. This feature allows you to set your preferred job criteria and receive email notifications when matching positions are posted. About the role - CDL Class B Driver (Templeton, MA) We are excited to announce an opportunity at Orica for a CDL Class B Driver within our Orica USA Commercial team. This role will be responsible for driving and operating Orica's bulk trucks (Mobile Manufacturing Units) and installing blasting products for our customers at local construction sites, mines, and quarries as well as being accountable for the upkeep and maintenance of the equipment. This is a hybrid role that consists of approximately 40% driving and 60% physical work related to the installation of blasting products. Responsibilities include loading products, driving a Class B CDL truck, pulling hoses, operating manufacturing units control systems, and climbing on and off the bulk truck in various weather conditions. Additionally, this role will operate equipment to provide blasting products while assisting in delivering a high-quality service of bulk explosives to customers. We prioritize safety and strive to ensure that all operations are conducted in a safe and environmentally responsible manner at all times. Work schedule Monday thru Friday Local driving (1-3 hours) Early morning starts at approx. 3 AM - 5 AM 10-12 hours per day, approx. Overtime may be needed Up to 10% overnight travel may be required What you will be doing This is a blended role that consists of 40% driving and 60% physical work Pre-trip and post-trip inspection of vehicles, including checking and filling fluid levels Ability to safely hook up and unhook trailers Drives emulsion tanker trucks and box trucks Ensure raw materials and dangerous goods are used, handled, and stored according to requirements Ensure minimum damage to the environment through waste minimization and control Report all unusual incidents and accidents immediately Participate in daily toolbox talks and monthly safety meetings What you will bring At least one year of experience driving and/or handling materials preferred Knowledgeable of DOT regulations required Ability to communicate and work in a team environment Good attention to detail and math skills to handle inventory daily Ability to prioritize various projects, ongoing daily tasks, and high-priority situations to maximize efficiency Physical requirements The work environment involves being outside in all types of weather Lifting up to 60 pounds and carrying 50 pounds or more of product or other materials Must be able to load product, pull large hoses, fill holes, and climb on/off the truck Shoveling gravel to fill drilled holes consistently throughout the day Pushing/pulling in working with equipment Other activities include frequent bending and squatting Your qualifications Requires Class B CDL; Class A is a plus Tanker endorsement preferred Hazmat endorsement preferred We will support obtaining endorsements At least one year of experience driving is preferred High School diploma or equivalent What we offer As part of a truly global company, you will have the ability to grow and learn in a diverse, collaborative culture. We foster relationships and learning through connected global and local teams, promote flexible and diverse career paths and support the development of your knowledge and skills. You will be paid a competitive salary, learn from talented individuals across multiple disciplines and be able to thrive in a safe workplace within a collaborative culture. Ignite your career at a place where your distinct potential can find its home. Compensation Hourly Pay Range: $28-34 Signing Bonus $4,500 (Salary to be determined by the applicant's experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data.) Benefits (Full Time Employees) Medical/Prescription Drug - Three (3) plans to choose from Dental - Two (2) plans to choose from Vision - Two (2) plans to choose from Health Savings Account Flexible Spending Accounts Basic Employee Life and Accidental Death & Dismemberment Insurance Voluntary Employee/Dependent Life and Accidental Death & Dismemberment Insurance Company provided Short-Term and Long-Term Disability Company provided Employee Assistance Program Voluntary Hospital Indemnity, Critical Illness & Accident Plans Voluntary Identity Theft Protection Voluntary Legal Plan 401(k) + Company Match Company provided Maternity Leave Company provided Bonding Leave Accrued Paid Time Off Paid Sick & Safe Time Nine (9) Scheduled Holidays + Two (2) Floating Holidays We respect and value all Orica promotes and fosters a culture of inclusion and Equal Opportunity Employment everywhere we operate. We treat our people and applicants with fairness, dignity, and respect, getting the best of everyone's contributions. All qualified applicants will receive consideration for employment without regard to race, religion, sexual orientation, gender perception or identity, nationality, age, military or veteran, marital or disability status. We have been made aware that some individuals have received scam emails which include false and invalid offers of employment from Orica. Please note that Orica will not offer employment to any candidate without first undertaking a formal application and recruitment process. All candidates are required to actively participate in the recruitment process applicable to the specific role and location where the role is based, prior to any offer of employment being made. Please also be advised that Orica will never request payment or require candidates to deposit a check during the recruitment and onboarding processes. Orica is an Equal Opportunity Employer and we are a Drug-free workplace.

! Be part of a team that values safety, inclusion, and excellence We are one of the largest U.S. railroads transporting the nation's freight across 28 western states and 3 Canadian provinces. As a member of our team, you will play a role in supporting the movement of essential products and materials that help feed, clothe, supply, and power communities throughout America and the world. We are committed to a culture where all employees are included, belong, and have equal opportunity to achieve their full potential. Come make a difference with us! Learn more about BNSF and our Benefits Job Location: Commerce Other Potential Locations: Commerce, CA; Long Beach, CA; Los Angeles Harbor, CA; Los Angeles, CA Anticipated Start Date: 07/01/2025 Number of Positions: 11 Salary Range: $107,200 - $117,920 Bonus: $5,000 payable 30 days after hire; additional $5,000 payable 1 year after hire Apply early as this job may be removed or filled prior to the closing date, which is approximately seven (7) days after the posting date. To learn more about our BNSF Police team, please view this video: Resource Protection Key responsibilities may include: * Protects and safeguards company assets and resources including personnel, property and customer's property entrusted to the company. * Conduct proficient, sensitive corporate and criminal investigations, provide accurate, detailed reports and provide court testimony when required. * Identify and properly handle trespassers on Company property and make arrests as appropriate. * Counsels and advises company officials to reduce crime and accidents and improve security; coordinates response to railroad emergencies; supervises contract security guards and trains other employees on relevant matters. * Perform aggressive crime prevention patrol of facilities, railroad property and trains, with special emphasis on TOFC/COFC, automobiles, and high value shipments. The duties and responsibilities in this posting are representative categories to be used in deciding whether to apply for this position. This is not an exhaustive list of the position's duties. At BNSF Railway, we encourage individuals from all backgrounds to apply, showcasing their skills, experiences and development. We provide resources and tools to help you reach your full potential, fostering a supportive and inclusive environment. BASIC QUALIFICATIONS: * High School diploma or GED. * Must have satisfactorily completed basic police training at a recognized state certified academy * Must meet peace officer commissioning standards in state in which this job is posted and be commissioned as such and maintain a valid State Peace Office License in that state. * Must meet BNSF Resource Protection Solutions Team standards as a Special Agent * Must have a valid driver's license * Must be willing and able to travel as required * Must be able and willing to use the company's computer system for creating reports and databases * Must be physically and psychologically fit, able to successfully pass any required company evaluations and pass an extensive background investigation * Must successfully complete any required company training for this position * Must have broad knowledge of railroad industry and operations; particularly as it relates to handling emergency situations such as derailments, load securement, and like events * Must have a broad knowledge of criminal law and procedures * Must be able to successfully lead people, often in a stressful critical-event environment * Must be able to meet any government or Company training and retention standards * Must live or be willing to relocate within 50 miles of the assigned work location * Eighteen months of successful experience as a full time peace officer with a city, county, state federal or railroad law enforcement agency required PREFERED QUALIFICATIONS: * Bachelor's degree UNION: * Allied Services Division, Transportation-Communications Union * Dues required per union agreement At BNSF, you will have access to a comprehensive and competitive benefits package including: * An industry-leading 401(k) and renowned Railroad Retirement program. * A range of robust health care options for you and your dependents (including domestic partners), including medical, dental, vision, telemedicine, mental health, cancer support, and high-quality care network options. * Health care spending accounts (HSA) with employer contributions, as well as life and disability insurance, provided at no cost. * Family benefits including parental, pediatric and family building support, adoption and surrogacy reimbursement, and dependent care spending account (with employer match). * Access to discounts on travel, gym memberships, counseling services and wellness support. * Annual bonus (Incentive Compensation Program) * Generous leave / time off policies. * For more information, visit Benefits. Please be aware of potential fraud that can occur when searching for new career opportunities. Please review our FAQ for more information and awareness. All positions require pre-employment background verification, medical review and pre-employment drug screen. You can find more information by reviewing the Hiring Process. Federal authority requires BNSF employees, whose work requires unescorted access to secure areas of port facilities, to obtain a TWIC. More information is available at ************************************* BNSF Railway is an Equal Opportunity Employer, all qualified applicants receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. SF: MO | [[mfield5]] | Operations - Resource Protection | Commerce, CA | 90023; 90040; 90058; 90744; 90638