Application engineer jobs in North Dakota - 171 jobs

Responsible for developing, implementing, maintaining, and improving manufacturing processes, methods, and controls in accordance with product specifications and quality standards. Troubleshoots production issues to determine root cause and corrective actions. Coordinates manufacturing launch for new or revised products. Supports production to drive success in key performance indicators. Specifies tooling requirements and manages tooling implementation projects. Recommend, justify, and implement new manufacturing equipment. Schedule: Monday -Friday; 7:00am - 4:00pm Job Duties and Responsibilities (Essential Functions): * Follow all safety standards and policies and ensure a safe operating environment, including use of appropriate protective equipment and identification of potential safety concerns. * Develop capable and efficient manufacturing processes by studying product requirements and researching, designing, modifying, and validating manufacturing, assembly, and inspection methods. * Specify, cost justify, design, develop and test various tools, machinery and equipment for recommended manufacturing methods; and/or oversee the sourcing thereof. * Coordinate the manufacturing launch of new/revised products including establishing processes, implementing new tooling, providing written procedures, supporting manufacturing issues, and evaluating results. * Evaluate manufacturing processes and identify continuous improvement opportunities for safety, quality, delivery and cost. Apply knowledge of product design, fabrication, assembly, tooling, and materials. Confer with equipment vendors. Solicit observations from operators. Collect, analyze, and summarize manufacturing information and trends. * Coordinate and implement quality control objectives, activities, or procedures to resolve production problems, maximize product reliability, or minimize costs. * Keep equipment operational by specifying and coordinating maintenance and repair. * Develop design-for-manufacturing criteria and process capability expertise to provide input to future product and process design activities. * Confer with clients, suppliers, staff, and management personnel regarding purchases, product and production specifications, manufacturing capabilities, or project status. * Provide a manufacturing engineering presence on the production floor to assure interaction with team members from all shifts and appropriate manufacturing engineering support and feedback for the teams. * Provide technical resources for incident investigation, root cause analysis and corrective action. Participate when requested in finished product and raw material MRB process. * Provide training to production and support personnel. Develop and implement standard operating procedures. Support and implement standard manufacturing practices. * Mentor other engineers and technicians in best practices. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: * Four-year degree from an accredited college in an Engineering field or equivalent and 2-5 years of experience. Manufacturing Engineering and Industrial Engineering preferred * Experience with Demand Flow Technology (DFT) preferred * Experience with Windchill MPMLink preferred * Experience with Creo preferred Demonstrated Proficiencies/Skills/Abilities: Engineering and Technology: Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services. * Production and Processing: Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. * Problem Solving: Ability to analyze complex problems and lead a systematic approach to determine root cause and corrective actions. * Project Management: Ability to drive projects to completion using tools and tactics to specify scope, schedule, and resource requirements. * Communication: Ability to communicate complex concepts effectively with all levels of the organization in both verbal and written forms. * Mathematics: Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. * Mechanical: Knowledge of machines and tools, including their designs, uses, repair, and maintenance. * Design: Knowledge of design techniques, tools, and principles involved in the production of precision technical plans, drawings, and models. * Computer Skills: Proficient in Microsoft office and computer usage/application. CAD software skills desired - skills in Creo preferred. Knowledge of ERP and MES systems desired. * Language: Ability to read, write and speak the English language. * Quality: High attention to detail and accuracy; Ability to identify, troubleshoot, and determine root cause of problems. * Teamwork: Ability to balance team and individual responsibilities; objectivity and openness to others' views; positive attitude and team spirit. * Organizational Support: Support of organizational goals, objectives, and values; adherence to company policies and procedures; observation of safety and security procedures; participation in 6S program (sort, straighten, shine, standardize, sustain, safety). * Professionalism: Tactfulness and respect in working with others regardless of their status or position or the urgency of situations; Acceptance of responsibility for own actions; Integrity in following through on commitments. * Attendance/Punctuality: Punctuality in arrival times and observance of appropriate break and meal periods; acceptable attendance record and proper utilization time clocks and time off request forms. * Dependability: Responsiveness to management direction; Diligence in completing tasks on time or proposing an alternate plan; openness to additional hours when necessary. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Overtime hours may be required. This opportunity is located in Grand Forks, North Dakota. As our main sub-assembly composite facility, our Grand Forks location is essential to the development of every Cirrus aircraft. Home to the University of North Dakota and the state's third largest city, this unique town offers small town charm with an inviting community, centered on hospitality and grand possibilities. Activities in town expand across all four seasons, with abundant city parks, local fishing, collegiate sports, superb arts and theatre, excellent restaurants and several community events and festivals. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

Job Description Innovative Concrete, LLC is excited to announce a unique opportunity for military personnel transitioning to civilian life through the DoD SkillBridge program as a Commercial Concrete Field Engineer in North Dakota. This position allows candidates to leverage their military training and experience to gain valuable skills in the concrete and construction industry while supporting our Innovative projects. As a Concrete Field Engineer, you will be responsible for overseeing the technical aspects of concrete projects, ensuring compliance with specifications, managing quality control measures, and liaising between project managers and field teams. This role requires a strong understanding of concrete materials and construction practices, as well as excellent communication and leadership skills. Key Responsibilities: Assist in managing daily operations of concrete projects at various job sites. Review and interpret project plans, blueprints, and specifications. Ensure all work complies with industry standards and safety regulations. Conduct site inspections and quality control assessments to verify the integrity of materials and workmanship. Communicate project progress and challenges with stakeholders and team members. Assist in the training and development of crew members on best practices and safety measures. Prepare project reports, including documentation of materials used, labor costs, and safety compliance. Requirements Qualifications: Must be transitioning military personnel eligible for the DoD SkillBridge program. Must receive commanding officer approval to participate Understanding of construction principles, particularly in concrete work. Excellent problem-solving abilities and attention to detail. Strong communication and interpersonal skills, capable of collaborating with diverse teams. Ability to read and interpret technical documents and blueprints. Experience in project management or a related field is a plus. Must have a valid driver's license and reliable transportation. Willingness to undergo a background check and drug screening. Benefits Paid Holidays Health insurance from a leading provider of employee benefits. Simple, straightforward, and affordable dental insurance. Vision Insurance with one of the largest networks and significant savings and discounts. Aflac Supplemental Insurance: Offers a variety of supplemental plans such as short term disability, etc. Simple IRA through American Funds: Innovative Concrete, LLC will match up to 3%. We offer a great tool to all our employees and their eligible dependents that can help with virtually any distressing life problem, including: Marital & Relationship Counseling, Stress, Anxiety, Depression, grief, substance abuse and more.

Bismarck ND Manufacturing & Production Exp 5-7 years Deg Bachelor's Relo Bonus Travel - Often Job Description We currently has an opening for a Senior Sales Engineer located in Bismarck, ND. Primary Responsibility: Market and sell our products and services to obtain orders that are profitable The position is expected to achieve electrical distribution and engineering services solutions sales results. This will be expected in the geographic market region consistent with the expectations of seasoned sales professionals. The primary responsibility is to manage the assigned customer base, to increase sales in the local marketplace, application guidance and technical assistance to assigned customers. This position is expected to develop, grow, and maintain relationships with employees, specifiers, and customers including Authorized Distributors. Understand support structure available to sales, ; understanding proprietary systems and software including Bidmanager and VISTA; applying technical knowledge for all products that are involved with the sales assignment; comprehension of project specifications and drawings; ability to gain confidence of customers and become a trusted source of information about offerings. Essential Functions: 1) Develop and execute sales plans to meet performance expectations and requirements; 2) quote projects and negotiate correct required pricing; 3) prepare sales presentations to create product understanding and awareness; 4) build relationships with key customers to enhance long-term business prospects; 5) work with factories to resolve technical issues while working with customers to resolve quality issues; 6) canvas the market to gain insight and adjust to ever changing pricing and delivery requirements; 7) assist team to develop a coordinated sales effort while keeping management informed of market conditions; 8) obtain ongoing training on both functional and technical skills. We are a power management company with 2013 sales of $22.0 billion. We provides energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. We have approximately 102,000 employees and sells products to customers in more than 175 countries. Basic Qualifications (Including Educational Requirements) Basic Qualifications: •Bachelor's Degree from an accredited institution •Minimum 3 years of electrical industry sales experience •Possess and maintain a valid and unrestricted driver's license •Legally authorized to work in the US without company sponsorship Position Criteria: •Ability to respond to a variety of challenging circumstances while continuing to demonstrate superior selling skills for important customer services and applications •Electrical product knowledge •Ability to provide technical solutions built around customer needs •Skilled in time management •Possess negotiating skills while understanding and using techniques needed to close orders •Experience with preparing sales proposals that meet customer expectations •Robust presentation, training and communications skills •Experience utilizing Value Added selling techniques •Strong work ethic, communications skills, competitiveness, willingness to learn and adept at building relationships •Experience working with Bidmanager and Vista Preferred Qualifications: •Bachelor's degree in Electrical or Mechanical Engineering from an accredited institution Additional Information All your information will be kept confidential according to EEO guidelines. Direct Staffing Inc

Do you have a passion for leveraging data, analytics, and AI to drive meaningful change? At GE Aerospace, we are transforming supply chain processes to address one of our most critical business challenges: delivery. As a Staff Enterprise Application Engineer specializing in Palantir, you will utilize your expertise in Palantir Foundry and AWS cloud technologies to design, deploy, and tailor solutions for complex aerospace challenges. In this role, you will build and maintain Foundry pipelines, modular applications, and workflows, while working closely with stakeholders to create cutting-edge solutions using ontology, advanced analytics, and AI. **** **Roles and Responsibilities** + Architect and design sound/supportable technical solutions to complex business requirements + Develop and maintain Foundry pipelines using Pipeline Builder to ingest, transform, and integrate data. + Build modular applications and workflows leveraging Python, and Foundry AIP. + Collaborate with data engineers, analysts, and stakeholders to refine data models and ontology mapping. + Assist in Foundry workshops to guide stakeholders through platform capabilities. + Support testing, debugging, and performance tuning of Foundry applications. + Work with aerospace data to identify patterns, trends, and insights using Palantir Foundry and AWS analytical tools. + Develop custom applications and workflows within Foundry and AWS to address specific challenges. + Ensure data integrity and compliance with aerospace industry standards. + Apply lean methodologies to identify opportunities for process improvement. + Share feedback with Palantir and AWS product teams to enhance tools and workflows. + Provide technical coaching and direction to more junior teammates. **Technical Qualifications** + Strong experience in Python, PySpark, and front-end frameworks like React, Angular, or Vue.js. + Experience with Pipeline Builder, AIP, and Foundry's application development ecosystem. + Proficiency in AWS cloud services such as EC2, S3, Lambda, RDS, and CloudFormation. + Experience with Git-based code repositories and CI/CD workflows. **Minimum Qualifications** + Bachelor's degree from accredited university or college with minimum of 4 years of professional experience OR associate's degree with minimum of 7 years of professional experience OR High School Diploma with minimum of 9 years of professional experience + Minimum 3 years of professional experience in Computer Science or "STEM" Majors (Science, Technology, Engineering and Math) + **Note:** Military experience is equivalent to professional experience The base pay range for this position is $110,700- $184,600. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on October 31, 2025. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs ( _i.e_ ., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. **Eligibility Requirement:** + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job. **Desired Characteristics** + Ability to operate in an ambiguous environment as we establish this transformation program and define roles & responsibilities. + Demonstrated ability to quickly understand new concepts and analyze system deficiencies + Passionate about security and the quality of the applications they support + Organized, thorough, and detail oriented + Collaborates well with others to solve problems and actively incorporates input from various sources + Eager to learn, shares ideas, encourages and accepts feedback well + Strong analytical skills - strong problem-solving skills, communicates in a clear and succinct manner and effectively evaluates information / data to make decisions; anticipates obstacles and develops plans to resolve + Demonstrated customer focus - evaluates decisions through the eyes of the customer; builds strong customer relationships and creates processes from the customer's viewpoint + Experience working with an offshore development team + High level of energy and enthusiasm, with the ability to thrive in a dynamic, fast-paced setting + Comfortable with empowering colleagues and inspiring others to be their best **Note:** To comply with US immigration and other legal requirements, it is necessary to specify the minimum number of years' experience required for any role based within the USA. For roles outside of the USA, to ensure compliance with applicable legislation, the JDs should focus on the substantive level of experience required for the role and a minimum number of years should NOT be used. This Job Description is intended to provide a high-level guide to the role. However, it is not intended to amend or otherwise restrict/expand the duties required from each individual employee as set out in their respective employment contract and/or as otherwise agreed between an employee and their manager. **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

**It's fun to work in a company where people truly BELIEVE in what they're doing!** We're looking for a Principal Sales Engineer who is not only passionate about technology but thrives on engaging with customers to solve complex challenges. This role centers on migrating mainframe workloads to cloud environments, where your technical acumen and customer-facing skills will drive success in new and existing partnerships. The Sales Engineering team supports Account Executives in new and existing partner relationships, as well as, direct business in order to grow revenue opportunities. Rocket Software Sales Engineers are experienced technical professionals with an extensive enterprise software sales background who can successfully be the technical sales lead on software opportunities to progress and close business, and must function well as a member of a dynamic team, while having the ability to also work independently to progress and close business. **Essential Duties and Responsibilities** : + Engage with prospective clients to understand their data integration challenges, especially around migrating from mainframe systems to cloud environments. + Present and demonstrate our software solutions, clearly articulating the technical benefits and integration capabilities. + Engage and inspire customers by presenting solutions that demonstrate real value, backed by your passion for the latest database and AI technologies and trends. + Deliver compelling proof of concepts, highlighting how our offerings stand at the forefront of technology. + Successfully convey technical details to a non-technical audience, as well as, foster credibility with more technical audiences. + Provide knowledge and skills to help qualify business opportunities by understanding the user requirements and technical environment. + Actively participate in training and mentoring activities of other members of the Sales Engineering team. + Handle objections professionally; answer questions quickly and coherently; deal with challenges assertively and persuasively. **Required Qualifications:** + A minimum of 8+ years of relevant sales engineering experience. + Proven track record in presales or consulting roles with a strong foundation in mainframe or IBMi. + Experience working with large-scale enterprise data migration projects. + Strong understanding of data integration concepts, especially relating to mainframe databases (such as IBM Db2, IMS, VSAM) and cloud-native databases (such as Amazon RDS, Amazon Aurora, Amazon Redshift). + Data replication technologies (ETL, CDC) expertise is advantageous. + Prior experience supporting or migrating workloads from mainframe environments is preferred. + Familiarity with security best practices for data handling across cloud and mainframe environments. + Strong problem solving and requirements gathering skills. + Strong written and verbal communication skills. + Detail-oriented and can rapidly learn and take advantage of new concepts and technologies. + Ability to work independently and engage team support as required. + Ability to prioritize and manage workload to meet defined deadlines. + Must be comfortable working in a rapidly changing and sometimes unstructured environment. **Information Security:** Information security is everyone's responsibility. A fundamental principle of information security at Rocket Software is that all individuals in the organization have a responsibility for the security and protection of company information and IT Resources over which they have control, according to their role. **Diversity, Inclusion & Equity:** At Rocket we are committed to an inclusive workplace environment, where every Rocketeer can thrive by bringing their full selves to work. Being a Rocketeer means you are part of our movement to continually drive inclusivity, diversity and equity in our workforce. \#LI-Remote \#LI-MM1 The base salary range for this role is $136,085.00 - $170,106.00 /year. Exact compensation may vary based on skills, experience, and location. . **What Rocket Software can offer you in USA:** **Unlimited Vacation Time as well as paid holidays and sick time** **Health and Wellness coverage options for Rocketeers and dependents** **Life and disability coverage** **Fidelity 401(k) and Roth Retirement Savings with matching contributions** **Monthly student debt benefit program** **Tuition Reimbursement and Certificate Reimbursement Program opportunities** **Leadership and skills training opportunities** EOE M/F/Vet/Disability. Rocket Software Inc. is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Rocket Software Inc. is also committed to compliance with all fair employment practices regarding citizenship and immigration status. Rocket is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please call: ************ or send an email to *************************. We will make a determination on your request for reasonable accommodation on a case-by-case basis. As part of our commitment to a safe and trustworthy workplace, we include background and reference checks in our hiring process. _It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability._ _If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!_ Companies around the world trust Rocket to solve their most complex business challenges by powering their critical infrastructure, business processes, and data. We help extend the value of these assets, enabling our customers to embrace the potential of cloud and mobile computing, advanced analytics, and the innovations of tomorrow. From the clothes we wear to the cars we drive, Rocket solutions power the back-end systems that thousands of brands rely on every day. At Rocket, software is about more than just code-it's about people. We are passionate problem-solvers, working to make a difference for others. Our foundation is built on empathy, humanity, trust, and love, and we strive to embody these core values in everything we do. Whether we're serving our customers, partners, or fellow Rocketeers, we are committed to treating everyone with the respect and care they deserve. Founded in 1990, Rocket Software is headquartered in Waltham, Massachusetts, and has 20 offices worldwide, bringing people and technology together to build a better future.

ABOUT BARTLETT & WEST: Bartlett & West is an engineering, technology and other professional services firm headquartered in Topeka, KS with 19 offices in seven states throughout the Midwest. As a completely employee-owned company, Bartlett & West has a “We Before Me” mentality. We prioritize service to our clients, communities and each other. We're less concerned about titles and more concerned about how each person can be supported to make the greatest impact. Position Summary: This entry-level position will assist in designing civil engineering projects focusing on rural/regional systems, and municipal water systems. This position has a focus in potable water projects. Project work will involve: Pipeline distribution systems, elevated/ground storage, municipal or regional water supply systems, and hydraulic modeling. Veterans encouraged to apply. Responsibilities Essential Functions & Responsibilities: Develops plans and specifications for water projects. Will focus on pipeline distribution systems, elevated/ground storage tanks, municipal or regional water supply systems, pump stations, and hydraulic modeling. Performs environmental studies and writes technical reports. May assist with proposal preparations and fee development. Utilizes AutoCAD, Civil 3D, ArcGIS, in-house water distribution design model to design and analyze projects. Interacts with vendors in selection of equipment (pumps, pipe materials, valves, treatment equipment, storage tanks, SCADA systems, and metering equipment). Performs evaluations of sites, alternate solutions, costs and other considerations for client needs. Manages engineering work and interfaces with other disciplines as needed. Typically handles multiple projects for multiple clients simultaneously. Visits clients and job sites as needed to support project(s) and business development needs, including evening meetings. Serves as consultant on projects during construction phase. Qualifications Knowledge, Skills & Abilities: Good communication skills (verbal and written) Excellent listening and reading skills, including proofreading Must be flexible to changes in work assignments on short notice and/or daily as changes occur in project needs Effective problem solving and decision making skills Knowledge of pipeline distribution systems, elevated/ground storage tanks, municipal and regional water supply systems, irrigation and water diversion systems, water treatment plants, wastewater treatment plants, pump stations and/or water collection systems Credibility Accountability in work performance Analytical and critical thinking skills Ability to achieve business results Strong organizational skills and the ability to maintain amount of detail Proficiency in MS Office Suite including Word, Excel, PowerPoint and Outlook Proficiency in AutoCAD and Civil 3D, Water/Sewer GEMS, InfoWater, ArcGIS and water modeling software Ability to embrace new technology and processes including learning other software programs as needed (Adobe, Bluebeam, Deltek Vision accounting and project planning software, Client Relationship Management software, etc.) Exhibits initiative, responsibility, flexibility, and leadership Good time management skills with ability to handle complex deadline driven workload Ability to work independently and within a team successfully Education: Bachelor's degree in civil engineering or related engineering field required. Experience: 0-3 years engineering experience in potable water systems. Knowledge/experience of AutoCAD, Civil 3D, ArcGIS, and water modeling software strongly preferred. Travel Expectations: Must be able to travel in-state and out-of-state on occasion, which usually would consist of visiting other office locations, project sites, attending seminars or business meetings. Travel is 10% - 20% of the time depending on projects. Certain positions will require more travel. Travel expectations will be communicated through the employee-owner's manager, and for newly open positions, travel expectations will be reflected in the job posting announcement. Driver's license with clean driving record required. Bartlett & West is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, sexual orientation, status as a protected veteran or status as a qualified individual with disability. An offer is contingent upon successfully passing the pre-employment drug screen. Drug screen will need to complete within 48 hours of being contacted. Nearly all positions at Bartlett & West can require employee-owners to operate a motor vehicle on public roads in the course of their duties. Accordingly, all employees may be required to have acceptable driving records and to provide an authorization to the Company to periodically obtain MVR reports”. Bartlett & West partners with businesses and communities to build smarter, stronger, more connected infrastructure. From railroad GIS to industrial parks and city planning, we provide innovative technology and engineering solutions to clients worldwide. With deep industry knowledge and a passion for creative problem solving, we engineer better tomorrows. Bartlett & West is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, sexual orientation, status as a protected veteran or status as a qualified individual with disability.

Project Engineer ***Work Location: Cavalier SFB (Cavalier, ND)*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: Responsible for overseeing all aspects of construction projects, from planning to execution and closeout. Managing and overseeing project plans, schedules, and budgets Coordinating with architects, engineers, and contractors to ensure project milestones are met; serving as a primary point of contact for clients and stakeholders, communicating project progress, issues, and resolutions effectively Performing documents review of contract documents for schedule compliance and reasonability. Identifying potential risks and developing mitigation strategies; ensuring compliance with legal and regulatory requirements Implementing quality control measures to ensure work meets specifications and standards Conducting regular inspections and audits to identify and address quality issues Reviews and analyzes contractor plans and technical submittals for approval action, including progress schedules, environmental, safety and quality control programs, certifications and shop drawings. Prepares correspondence regarding Contractor performance, Requests for Equitable Adjustments (REAs), Requests for Information (RFIs) and other technical issues. Assisting with hosting site visits and giving presentations to owner's representatives. Providing guidance, mentoring, and training to team members; overseeing contract negotiations, administration, and compliance, resolving disputes and issues related to contracts Monitors scheduled progress of all construction activities and phases of construction and advises the Resident Engineer, COR, and project team of potential slippage or delay Prepares both partial and final payment estimates including the measurement and computation of pay item quantities, verification of materials on hand, and percentage complete of lump sum items. Produce monthly project reports displaying project status and updates for customers Participates in all phases of the contract modification process. Assists in preparation of scopes of work for RFP's, assists in preparation of government estimates, assists with reviews of contractor's proposals, and prepares contract modification documentation. Attend and participate in meetings with customers and contractors. Performs other duties as assigned Education/Experience: Bachelor's Degree in Engineering, Construction Management, Architecture, or related field Minimum 10 years Construction Project Management experience PMP certification is preferred. Experience with Federal Construction projects, particularly USACE, is preferred. Strong background in Project Management (PM), with the ability to lead and motivate teams to achieve project goals Strong interpersonal and presentation skills are required Strong technical competencies to create presentation materials and deliver presentations via electronic methods. Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

The Solutions Engineer is responsible for providing quality services and solutions to our clients while maintaining a high level of client satisfaction. The Solutions Engineer will accurately build and scope solutions that yield client and Marco service satisfaction. You are responsible for supporting and optimizing solutions sales opportunities through product demonstrations, pre and post sales design support of products. You will guide and assist Sales Representatives by providing technical expertise along with manufacturer and product knowledge. ESSENTIAL FUNCTIONS: Work with a focused set of products in the solutions group to achieve the following: Maintain technical expertise, including any necessary certifications. Demonstrations of solutions products. Builds product and assists in product development. Reviews and assesses solutions products. Provide sales consultation, design, and support of opportunities involving all products in assigned categories. Offer roadmap and strategic vision to new and existing clients that will result in specific tasks and recommendations of products. Ensure strong and effective market knowledge of product and services in collaboration with product development team. Serves as content expert for supported product groups. Demonstrating extensive knowledge and key benefits of Marco solutions versus the competition. Lead or assist with presales including customer demonstrations, proof of concepts, briefings, and marketing events sponsored by Marco. Upkeep demo equipment and solutions centers. Stay knowledgeable on current and future offerings from manufacturers in preparation for Marco sales efforts. Keep well informed on industry changes and continually work to improve sales and presentation techniques. Stay advised on company procedures and objectives, and always be prepared to accurately discuss them to our clients. Promptly assist and maintain documentation of client facing paperwork in a timely manner to include RFPs, PSEs, service requests, and purchase agreements. Attend required company and department meetings. Assist Sales staff with RFP responses. Act in accordance with Marco policies and procedures as set forth in the Employee Handbook. Perform other related duties as assigned. QUALIFICATIONS: An associate degree and three years of relevant experience; or equivalent combination of education and experience. Proven experience working with audio visual, network systems and new technology. Solid understanding of industry technologies as it pertains to presale responsibilities. Understand hardware and software related to Marco's current Audio Visual solution offerings which includes video conference, paging, K-12, auditoriums, gymnasiums and other complex designs. Certifications and knowledge in the following products: Crestron, QSC, Poly, Cisco, Barco, Extron CTS, CTS-L and CST-D preferred. Valid Driver's License, proof of personal insurance, and a clean driving record. REQUIRED SKILLS: Proficiency with business collaboration tools such as MS Office applications, Visio, MS Project, and company and client specific programs Communication - Must possess superior communication skills in working with technical and non-technical people, and the ability to develop and maintain collaborative relations among all levels of an organization. Commitment - This is needed to see a project or task from start to finish. Showing that you are a hard worker, committed to your job, and improving yourself, shows you can take something on and finish it. Initiative - Being able to demonstrate you can handle problems on your own and deal with them. Not waiting to be told what to do when you see a problem. If you can't solve it yourself, go find someone who can. Confidence - When you are assured of your own ability, it shows you have the nerves to handle the tough situations that can arise. Teamwork - The ability to work with others on a combined task, make contributions to the task, and share the responsibility of the outcome. Time Management - Your ability to prioritize several tasks and keep them running simultaneously (multitasking). Also being able to recognize and respond to changing priorities in order to meet deadlines. Enthusiasm - You need to be able to not only motivate yourself but motivate others as well. Flexibility - Adapt to changes in the work environment. Change approach or method to best fit the situation. Continuous Learning - Has desire and seeks to expand knowledge of audio visual, network systems and new technology. Pay Range: $73,006 - $113,159 annually The pay range listed for this position is based on candidate's skill level, experience, relevant licenses, and educational background. For detailed information about our benefits, please visit our careers page at *************************

Braun Intertec is seeking a CMT/Geotechnical Staff Engineer, to join our Bismarck, ND office. Responsibilities: Perform various field and laboratory tests Work independently on specific assignments of limited scope and with engineers and on larger projects as a team member Prepare proposals for geotechnical and material testing projects Manage basic geotechnical and material testing projects Maintain client communications and build client relations Develops solutions, makes recommendations, and prepares engineering reports for review Observe construction in progress and reports to project engineer Gain experience relevant to work toward obtaining Professional Engineer license Required Skills: Valid driver's license and clean driving record Perform field related services at least 50% of time Good written and verbal communication skills Must be able to lift 50 lbs. on a regular basis and up to 75 lbs. periodically Travel up to 25% of time Required Experience: Prior professional consulting experience desired, up to four years Geotechnical experience preferred Proficiency in field-testing & report writing experience Bachelor's degree in civil engineering with geotechnical, materials emphasis, or related Possess EIT certification or ability to obtain within 6 months Braun Intertec is a drug-free workplace and require all new hires to complete a pre-employment drug screen test, criminal background check, and motor vehicle report. Braun Intertec employees are encouraged to expand their skills and certifications through company provided training and mentoring. Braun Intertec offers a competitive compensation and benefits package, including: medical, dental, vision, life insurance, 401(k) plan, PTO, Employee Stock Ownership Program (ESOP), and paid holidays. #LI-MB1 Compensation Range: $48,000.00 - $72,000.00 As an EEO/Affirmative Action Employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, veteran or disability status. Braun Intertec strives to ensure that its careers web site is accessible to all. If you need assistance completing your online application, please email ************************. As an Equal Opportunity Employer, Braun Intertec is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans. If you need a reasonable accommodation to assist with your job search or application for employment, please e-mail us at ************************. In your e-mail, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

This position provides technical assistance on electrical, instrumentation, and control (E/I&C) equipment to reduce production losses from equipment failures, and to ensure safe and compliant operation of the Synfuels plant. This is accomplished by maintaining technical competence regarding the theory, design, and application of electrical, instrumentation, and control equipment, managing and interfacing with Maintenance regarding preventive maintenance (PM) and predictive maintenance (PdM) techniques, and troubleshooting electrical, instrumentation, and control equipment to develop reliable, cost-effective solutions. **ESSENTIAL DUTIES** + Assist in developing scopes of work, preliminary and final electrical engineering research, design, and engineering packages, cost estimates, specifications, engineering and construction schedules, and project justifications. + Assess feasibility, estimate, design, test, schedule, and implement electrical, instrument, and control system projects to enable plant operations personnel to achieve optimum plant production. + Troubleshoot and analyze electrical, instrumentation, and control issues and provide recommendations for corrective actions. + Assist in specifying new equipment and maintaining equipment and component standardization. + Participate in the checkout/acceptance testing and commissioning of new installations. + Ensure equipment spare parts are optimized on critical equipment by reviewing min/max inventory levels, determining recommended suppliers, and facilitating billing of material (BOM) revisions. + Create as-built documentation of electrical, instrument, and control systems. + Provide technical assistance and input in the development of electrical and instrument procedures and standards. + Support the development of asset management plans and other reliability improvement efforts. + Provide technical support to Process Operations, Planning, and Maintenance in equipment repairs, replacements, substitutions, and upgrades. + Maintain work area in a neat, orderly, and efficient manner. + Perform other duties as assigned. **MINIMUM QUALIFICATIONS** + Bachelor's degree from an Engineering Accreditation Commission/Accreditation Board for Engineering and Technology (EAC/ABET) accredited electrical or electronics engineering program. + A valid driver's license. + This is a Department of Transportation (DOT) (PHMSA) qualified position. + Travel required. **PHYSICAL AND ENVIRONMENTAL DEMANDS** Requires constant hand coordination; frequent sitting, standing, walking, use of a computer/keyboard, and climbing stairs and ladders; occasional bending, low level and elevated activity, lifting/carrying up to 50 pounds, hand grip up to 25 pounds, reaching above and below shoulder level, crawling, use of tools, foot controls, and turning of valves. Requires finger dexterity, ability to perform close work, good color vision, hearing, and the ability to exchange accurate information. Over 80 percent of the day is spent in an office environment. Exposed occasionally to dirt, dust, chemicals, extreme heat and cold, vibration, noise, poor ventilation, electrical risks, confined areas, and working at heights up to 150 feet. Incumbents are required to wear dust masks, respirators, and full-face Scott Air Paks when necessary. Travel is required to meet with vendors and for training. **KEY SKILLS** + Knowledge of electrical, instrumentation and control concepts, engineering analysis and design techniques, troubleshooting and problem-solving skills. + Able to read and interpret electrical, instrument and control diagrams. + Good verbal and written communication skills. + Proficient with personal computers and Microsoft Word, Excel, and Outlook. + Able to analyze data, conduct research, implement recommendations, develop plans and goals, present information to others, and work under pressure of time constraints. Basin Electric wants all interested and qualified candidates to apply for employment opportunities. If you are an applicant with a disability who is unable to use our online tools to search and apply for jobs, or who needs other assistance or accommodations, please contact us at ************. Please indicate the specifics of the assistance needed or provide your contact information, and a Basin Electric Human Resources representative will contact you. Basin Electric is an Equal Employment Opportunity Employer regarding race, color, religion, sex, sexual orientation, gender identity, national origin, disability, and veterans status.

Project Engineer (Assistant Project Manager) Industrial Electrical Construction Are you ready to build your career with a leader in industrial electrical engineering, construction, and automation? At Interstates, our Project Engineers (Assistant Project Managers) play a critical role in supporting project teams, partnering closely with field leadership, and keeping complex electrical construction projects running smoothly. You'll gain hands-on experience across project controls, scheduling, coordination, and client interaction-while learning from experienced professionals in a collaborative, people-first environment. Integrity, trust, and safety guide everything we do. No two days look the same, and you'll be challenged to think critically, solve problems, and grow your skills on meaningful projects. Interstates is a dynamic, growing company that invests in your development and supports long-term career paths. Our Culture: Family-Like, By Design * Caring coworkers who treat each other like family * You're valued as an individual-not just a role * Flexible schedules that support work-life balance * Team lunches and social activities that build camaraderie * Opportunities to give back through community and charity events Our Why * Providing opportunities for our people * Making a difference with our clients * Pursuing a better way What You'll Do * Support the Project Manager and jobsite leadership with daily project coordination and controls * Maintain and manage project control systems for the benefit of the project team * Create, update, and communicate CPM schedules * Assist with Last Planner / whiteboard crew scheduling * Prepare and track RFIs, submittals, meeting minutes, and site documentation * Analyze project data and support problem-solving and alternative execution strategies * Assist with estimating take-offs, cost analysis, and change order support * Participate in client meetings and collaborate with trade partners and subcontractors * Prepare materials for and participate in monthly project reviews * Support procurement and expediting of materials and subcontracted work * Promote and model Interstates' safety culture every day What We're Looking For Knowledge, Skills, & Abilities * Strong organizational skills with the ability to prioritize and manage multiple tasks * Willingness to adapt project systems and processes to drive successful outcomes * Strong interpersonal, written, and verbal communication skills * Comfortable interacting with clients, peers, and leadership Education * Bachelor's or Associate degree in Electrical Engineering, Electrical Technology, Construction Management, or a related field Travel & Location * Up to 25% travel to customer sites * Aberdeen, SD will serve as your home base Why Interstates? * Competitive pay and bonus incentives * 401(k) to help you plan for the future * Health, dental, and vision insurance with multiple plan options * Paid vacation-when you're off, we encourage you to truly unplug * Disability and life insurance * Clear advancement opportunities with onsite career coaching At Interstates, our success starts with yours. If you're looking for a role where you can learn fast, contribute meaningfully, and build a long-term career in industrial construction-we'd love to meet you.

Advanced Engineering and Environmental Services (AE2S) is an award-winning, specialized civil/environmental consulting engineering firm that provides professional services and a unique brand of extreme client service. Our work environment is consistently recognized both locally and nationally for our great culture and values, proven recognition programs, and social atmosphere. Significant Opportunities to Grow and Advance Great Culture and Spirit where Creativity is Fostered Core Values which Speak to the Heart of AE2S and its Employees Large, Diverse, and Challenging Projects with the Latest Technology Family-Friendly with Flexibility and Work-Life Balance AE2S offers more than just competitive compensation and a best-in-class insurance package to our employees and families; our benefit plan is one of the richest plans currently in the marketplace today! 100-percent paid Family Health Insurance 100-percent paid Employee Dental, Short- & Long-Term Disability, and Vision Insurance Discretionary Bonus Plan Employee Stock Ownership Plan (ESOP) Matching 401(k) Contributions Paid Time Off (PTO) Credits for Past Experience Paid Parental Leave Wellness Program Anticipated Starting Salary: $63,000-$77,000 per year DOE (Compensation is subject to variation due to factors such as education, experience, skillset, etc.) Position will remain posted until filled Engineer-in-Training (EIT) - Williston, ND Our growth has created an exciting opportunity for individuals wanting to go beyond an ordinary career. We are an award-winning civil engineering consulting firm recognized locally and nationally for our culture and values. If you are seeking a rewarding career and an opportunity for advancement, join our growing firm now! Successful candidates will work under the direct supervision of design engineers and project managers and will have the opportunity to develop skills in design, plan and specification development, construction observation, construction administration, and report preparation, with an emphasis on personal and career development. Responsibilities Assist Project Manager with the development and preparation of plans, specifications, technical reports, and estimates. Assist Project Managers in design and construction of structural systems of reinforced concrete, wood, masonry, structural steel, steel joists, and light gauge steel. Assist Project Managers in performing structural design of water and wastewater treatment facilities, including water-tight structures. Assist design engineers in performing structural design of commercial, industrial and residential structures. Perform construction observation and administration on projects. Perform design drafting to prepare project drawings and details. Requirements Basic Bachelor's degree in Civil Engineering (with a structural emphasis) or related field Successfully completed the Fundamentals in Engineering, or ability to complete within 6 months Working knowledge and experience using Revit, AutoCAD, and computer aided design software Strong written and oral communication skills, attention to detail, and curiosity Ability to travel as required All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations. Preferred Intern or employment experience related to structural design, building construction, or project management Revit, AutoCAD or Civil 3D experience Physical Ability to work in adverse weather conditions Ability to walk up to 3-miles on uneven terrain Ability to stand or sit for prolonged periods of time Occasionally climb, stoop, bend, kneel, crouch, reach, and twist Occasionally lift, carry, push, and pull light to moderate amounts of weight May require lifting and carrying up to 20 pounds, with rare lifting of up to 50 pounds Ability to inspect equipment, structures, or materials to identify the cause of errors or other problems or defects May be required to wear Personal Protection Equipment (PPE) including but not limited to, flame resistant clothing, hard hat, and protective footwear May require occasional evenings and weekends with overtime expectations varying with workload May be required to travel to off-site locations including occasional overnight stays out of town AE2S is an Equal Opportunity / Affirmative Action Employer

Responsible for developing, implementing, maintaining, and improving manufacturing processes, methods, and controls in accordance with product specifications and quality standards. Troubleshoots production issues to determine root cause and corrective actions. Coordinates manufacturing launch for new or revised products. Supports production to drive success in key performance indicators. Specifies tooling requirements and manages tooling implementation projects. Recommend, justify, and implement new manufacturing equipment. Schedule: Monday -Friday; 7:00am - 4:00pm Job Duties and Responsibilities (Essential Functions): Follow all safety standards and policies and ensure a safe operating environment, including use of appropriate protective equipment and identification of potential safety concerns. Develop capable and efficient manufacturing processes by studying product requirements and researching, designing, modifying, and validating manufacturing, assembly, and inspection methods. Specify, cost justify, design, develop and test various tools, machinery and equipment for recommended manufacturing methods; and/or oversee the sourcing thereof. Coordinate the manufacturing launch of new/revised products including establishing processes, implementing new tooling, providing written procedures, supporting manufacturing issues, and evaluating results. Evaluate manufacturing processes and identify continuous improvement opportunities for safety, quality, delivery and cost. Apply knowledge of product design, fabrication, assembly, tooling, and materials. Confer with equipment vendors. Solicit observations from operators. Collect, analyze, and summarize manufacturing information and trends. Coordinate and implement quality control objectives, activities, or procedures to resolve production problems, maximize product reliability, or minimize costs. Keep equipment operational by specifying and coordinating maintenance and repair. Develop design-for-manufacturing criteria and process capability expertise to provide input to future product and process design activities. Confer with clients, suppliers, staff, and management personnel regarding purchases, product and production specifications, manufacturing capabilities, or project status. Provide a manufacturing engineering presence on the production floor to assure interaction with team members from all shifts and appropriate manufacturing engineering support and feedback for the teams. Provide technical resources for incident investigation, root cause analysis and corrective action. Participate when requested in finished product and raw material MRB process. Provide training to production and support personnel. Develop and implement standard operating procedures. Support and implement standard manufacturing practices. Mentor other engineers and technicians in best practices. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Four-year degree from an accredited college in an Engineering field or equivalent and 2-5 years of experience. Manufacturing Engineering and Industrial Engineering preferred Experience with Demand Flow Technology (DFT) preferred Experience with Windchill MPMLink preferred Experience with Creo preferred Demonstrated Proficiencies/Skills/Abilities: Engineering and Technology: Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services. Production and Processing: Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Problem Solving: Ability to analyze complex problems and lead a systematic approach to determine root cause and corrective actions. Project Management: Ability to drive projects to completion using tools and tactics to specify scope, schedule, and resource requirements. Communication: Ability to communicate complex concepts effectively with all levels of the organization in both verbal and written forms. Mathematics: Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Mechanical: Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Design: Knowledge of design techniques, tools, and principles involved in the production of precision technical plans, drawings, and models. Computer Skills: Proficient in Microsoft office and computer usage/application. CAD software skills desired - skills in Creo preferred. Knowledge of ERP and MES systems desired. Language: Ability to read, write and speak the English language. Quality: High attention to detail and accuracy; Ability to identify, troubleshoot, and determine root cause of problems. Teamwork: Ability to balance team and individual responsibilities; objectivity and openness to others' views; positive attitude and team spirit. Organizational Support: Support of organizational goals, objectives, and values; adherence to company policies and procedures; observation of safety and security procedures; participation in 6S program (sort, straighten, shine, standardize, sustain, safety). Professionalism: Tactfulness and respect in working with others regardless of their status or position or the urgency of situations; Acceptance of responsibility for own actions; Integrity in following through on commitments. Attendance/Punctuality: Punctuality in arrival times and observance of appropriate break and meal periods; acceptable attendance record and proper utilization time clocks and time off request forms. Dependability: Responsiveness to management direction; Diligence in completing tasks on time or proposing an alternate plan; openness to additional hours when necessary. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Overtime hours may be required. This opportunity is located in Grand Forks, North Dakota. As our main sub-assembly composite facility, our Grand Forks location is essential to the development of every Cirrus aircraft. Home to the University of North Dakota and the state's third largest city, this unique town offers small town charm with an inviting community, centered on hospitality and grand possibilities. Activities in town expand across all four seasons, with abundant city parks, local fishing, collegiate sports, superb arts and theatre, excellent restaurants and several community events and festivals. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

Responsible for developing, implementing, maintaining, and improving manufacturing processes, methods, and controls in accordance with product specifications and quality standards. Troubleshoots production issues to determine root cause and corrective actions. Coordinates manufacturing launch for new or revised products. Supports production to drive success in key performance indicators. Specifies tooling requirements and manages tooling implementation projects. Recommend, justify, and implement new manufacturing equipment. Schedule: Monday -Friday; 7:00am - 4:00pm Job Duties and Responsibilities (Essential Functions): Follow all safety standards and policies and ensure a safe operating environment, including use of appropriate protective equipment and identification of potential safety concerns. Develop capable and efficient manufacturing processes by studying product requirements and researching, designing, modifying, and validating manufacturing, assembly, and inspection methods. Specify, cost justify, design, develop and test various tools, machinery and equipment for recommended manufacturing methods; and/or oversee the sourcing thereof. Coordinate the manufacturing launch of new/revised products including establishing processes, implementing new tooling, providing written procedures, supporting manufacturing issues, and evaluating results. Evaluate manufacturing processes and identify continuous improvement opportunities for safety, quality, delivery and cost. Apply knowledge of product design, fabrication, assembly, tooling, and materials. Confer with equipment vendors. Solicit observations from operators. Collect, analyze, and summarize manufacturing information and trends. Coordinate and implement quality control objectives, activities, or procedures to resolve production problems, maximize product reliability, or minimize costs. Keep equipment operational by specifying and coordinating maintenance and repair. Develop design-for-manufacturing criteria and process capability expertise to provide input to future product and process design activities. Confer with clients, suppliers, staff, and management personnel regarding purchases, product and production specifications, manufacturing capabilities, or project status. Provide a manufacturing engineering presence on the production floor to assure interaction with team members from all shifts and appropriate manufacturing engineering support and feedback for the teams. Provide technical resources for incident investigation, root cause analysis and corrective action. Participate when requested in finished product and raw material MRB process. Provide training to production and support personnel. Develop and implement standard operating procedures. Support and implement standard manufacturing practices. Mentor other engineers and technicians in best practices. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Four-year degree from an accredited college in an Engineering field or equivalent and 2-5 years of experience. Manufacturing Engineering and Industrial Engineering preferred Experience with Demand Flow Technology (DFT) preferred Experience with Windchill MPMLink preferred Experience with Creo preferred Demonstrated Proficiencies/Skills/Abilities: Engineering and Technology: Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services. Production and Processing: Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Problem Solving: Ability to analyze complex problems and lead a systematic approach to determine root cause and corrective actions. Project Management: Ability to drive projects to completion using tools and tactics to specify scope, schedule, and resource requirements. Communication: Ability to communicate complex concepts effectively with all levels of the organization in both verbal and written forms. Mathematics: Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Mechanical: Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Design: Knowledge of design techniques, tools, and principles involved in the production of precision technical plans, drawings, and models. Computer Skills: Proficient in Microsoft office and computer usage/application. CAD software skills desired - skills in Creo preferred. Knowledge of ERP and MES systems desired. Language: Ability to read, write and speak the English language. Quality: High attention to detail and accuracy; Ability to identify, troubleshoot, and determine root cause of problems. Teamwork: Ability to balance team and individual responsibilities; objectivity and openness to others' views; positive attitude and team spirit. Organizational Support: Support of organizational goals, objectives, and values; adherence to company policies and procedures; observation of safety and security procedures; participation in 6S program (sort, straighten, shine, standardize, sustain, safety). Professionalism: Tactfulness and respect in working with others regardless of their status or position or the urgency of situations; Acceptance of responsibility for own actions; Integrity in following through on commitments. Attendance/Punctuality: Punctuality in arrival times and observance of appropriate break and meal periods; acceptable attendance record and proper utilization time clocks and time off request forms. Dependability: Responsiveness to management direction; Diligence in completing tasks on time or proposing an alternate plan; openness to additional hours when necessary. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Overtime hours may be required. This opportunity is located in Grand Forks, North Dakota. As our main sub-assembly composite facility, our Grand Forks location is essential to the development of every Cirrus aircraft. Home to the University of North Dakota and the state's third largest city, this unique town offers small town charm with an inviting community, centered on hospitality and grand possibilities. Activities in town expand across all four seasons, with abundant city parks, local fishing, collegiate sports, superb arts and theatre, excellent restaurants and several community events and festivals. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

Körber is the home for passionate people who innovate, collaborate, and love what they do. Entrepreneurial spirit is our joint DNA. We develop future technologies and support talents to deploy their skills and reach their full potential. We combine our strong heritage with our understanding of local specifics and a global mindset to bring people together and create valuable solutions for our customers. We aim to be the first to do the right thing at the right time. Join the home for entrepreneurs! The Manufacturing Engineer is responsible for designing, implementing, and improving manufacturing processes to increase efficiency, reduce costs, and enhance product quality. This role requires a hands-on approach and a deep understanding of manufacturing principles, along with strong problem-solving skills and a commitment to continuous improvement. Your role in our team * You will design, develop, and optimize manufacturing processes to improve efficiency, quality, and safety * You will evaluate product designs and identify product cost reduction opportunities * You will collaborate with product design, procurement, and development teams to ensure manufacturability of new products * You will analyze production data and implement process improvements to reduce waste, increase productivity, and enhance product quality * You will collaborate with cross-functional teams, including production, quality assurance, and maintenance, to troubleshoot and resolve manufacturing issues * You will develop and implement process documentation, including work instructions, standard operating procedures, and process flow diagrams * You will conduct time and motion studies to identify opportunities for process improvements and cost reductions * You will evaluate and implement new manufacturing technologies and equipment to improve production capabilities * You will lead or participate in continuous improvement initiatives, such as Lean Manufacturing, Six Sigma, and Kaizen events * You will ensure compliance with safety regulations and quality standards in all manufacturing processes * You will provide technical support and training to production staff on new processes and equipment Your profile * You have obtained a bachelor's degree in mechanical engineering, industrial engineering, manufacturing engineering, materials science, supply management, or a related field * Your certification in Lean Manufacturing, Six Sigma, or other continuous improvement methodologies is preferred * You have experience as a Manufacturing Engineer or in a similar role within a manufacturing environment * Your background is in custom automation design and manufacturing * You are proficient with CAD software (AutoCAD, Creo, SolidWorks) and familiar with ERP systems such as SAP * You have a strong understanding of materials science and product design principles, including material selection and application * You know PLC programming and industrial control systems * You have strong analytical and problem-solving abilities, with the ability to interpret complex data and support decision-making * You have effective communication and interpersonal skills, with the ability to collaborate in a team environment * You have a strong attention to detail and the ability to produce high-quality work while managing multiple projects in a fast-paced setting, proficiency with Power BI or Access Your working environment at Körber Join Körber Pharma, and you will work in an innovative, friendly, and digital environment, providing the opportunity to advance your career. Irrespective of whether it is engineering, production, or supporting exciting projects, you have the chance to contribute your expertise and make a difference. As part of the team, you contribute to the solution throughout the entire pharma value chain. Your benefits * You will work in a modern work environment with an open culture towards improvements and new ideas * You are part of a global operating company with a wide customer base and a growing business * You profit from international cooperation within a group-expert network to implement corporate-wide concepts * You will work in a team that is focusing on customer requirements * You will get an attractive compensation package including health, dental, vision insurance, and a retirement plan Can you find yourself in this profile? Then you are right at Körber. We are looking forward to getting to know you! Equal employer opportunity We are an Equal Opportunity Employer and are committed to ensuring equal employment opportunity to all applicants. All hires to our team are based on qualifications, merit, and business needs. It is our policy to give equal employment opportunities to all qualified persons without regard to legally protected characteristics, or any other consideration made unlawful by applicable federal, state/provincial, and/or local law. Prior to the next step in the recruiting process, we welcome you to inform us confidentially if you may require any special accommodations in order to participate fully in our recruitment experience, please contact us via ****************. We work with selected partners and therefore ask recruitment consultancies to refrain from contacting us by mail or telephone. Disclaimer: The duties listed above are intended only as representation of the essential functions of this position. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. The job advertisement does not constitute an employment agreement between the employer and employee and is subject to change at the sole discretion of the employer. Nothing in this document alters an employee's at-will employment status. Please note that the salary information is a general guideline only. Individual compensation will be determined by various factors such as scope and responsibilities of the position, experience, education, skills, location, and market and business considerations. Applications must be submitted via our career site. Applicants must be legally authorized to work for ANY employer in the U.S., this position is not eligible for Visa Sponsorship. Apply now and join our team! Ready for your next step? Click on 'Apply now' to get started right away! As long as the position is advertised, you can apply at any time. We value diversity and therefore welcome all applicants - regardless of gender, nationality, ethnic or social origin, religion/belief, disability, age, sexual orientation and identity, and any other protected status. You can find out more about our culture here Culture at Körber - it's worth taking a look! If you have any questions or technical problems, please send us an e-mail to ****************. Alyssa Cuevas is the responsible person for this job advertisement. We work with permanent partners and therefore ask recruitment consultants to refrain from contacting us by e-mail or telephone. We are Körber - an international technology group with around 13,000 employees at over 100 locations worldwide and a common goal: we turn entrepreneurial thinking into customer success and shape technological change. In our Business Areas Pharma, Supply Chain, and Technologies, we deliver products, solutions and services that inspire and create added value for customers. We build ecosystems that solve the challenges of today and tomorrow. Körber AG is the holding company of the Körber Group.

Job Title: Project Engineer - Heavy Civil & Underground Construction Industry: Heavy Civil, Hydro, Utility, Geotechnical Projects Experience Level: 1-2 Years | Entry-Level Role Compensation: Competitive Pay + Full Benefits Position Overview: At Engineering & Construction Innovations, Inc. (ECI), we don't just build projects-we solve the toughest engineering challenges in heavy civil construction. We are looking for a Project Engineer who wants to be hands-on, working both in the field and office on complex, high-impact projects. If you're ready to tackle unique construction challenges and build a rewarding career, this is your opportunity. Some travel within the Midwest region is required. About Us - Why ECI? At ECI, we THRIVE outside the box. That means we take on the toughest engineering challenges and find smart, unconventional solutions to get the job done. From hydroelectric dams to underground infrastructure, we tackle complex projects that demand innovation, expertise, and hands-on problem-solving. Hands-On Experience - Work directly on high-impact infrastructure projects Innovative Problem-Solving - We go beyond conventional methods to engineer smart, effective solutions Career Growth - Work alongside industry experts and gain high-value, real-world experience Tight-Knit Team - A mid-sized company where employees are valued, not just a number Key Responsibilities Assist in interpreting drawings and specifications for field crews and craft supervision Perform quantity calculations by taking measurements and determining percentage of completed/installed materials and work Assist in the preparation of work plans and work packages Assist in field surveying and layout work, including elevations, control points, and compilation of as-built data Order and schedule material deliveries to ensure project efficiency Perform material takeoffs from drawings, specifications, and contract documents Perform basic engineering calculations and technical drafting to support field operations Assist engineers/project managers with data gathering and preparation for submittals and transmittals to customers, vendors, subcontractors, governmental agencies, and internal use Assist in maintaining basic project record keeping, including daily reports, photographs, RFIs, and memorandums Enter data into the job cost system and participate in reviewing cost reports with job site management Support cost tracking, job costing, and reporting Assist in generating change orders and as-built data to be reviewed by the project manager Qualifications Bachelor's degree in a construction-related field (Engineering or Construction Management) 1-2 years of combined experience in heavy/civil projects (internship experience preferred) Strong work ethic - willing to do what it takes to get the job done and do it right Passion for heavy civil construction and problem-solving Ability to read and interpret construction drawings and specifications Team-oriented but able to work independently when needed Willingness to travel regionally for project assignments Ability to work for ECI without requiring sponsorship for employment now or in the future Authorized to work in the United States What We Offer Competitive salary and performance-based bonuses Medical, dental, and vision insurance for employees and dependents Wellness program for employees and dependents Simple IRA Paid time off to support work-life balance Opportunities for career development and mentorship Texting Privacy Policy and Information: Message type: Informational; you will receive text messages regarding your application and potentially regarding interview scheduling. Message frequency will vary depending on the application process. Msg. & data rates may apply. OPT out at any time by texting “Stop”. ECI is an equal opportunity employer. All qualified applicants will be considered without regard to age, race, color, sex, religion, national origin, martial status, ancestry, citizenship, veteran status, sexual orientation or preference, or disability.

McGough is a respected partner that brings six generations of experience to high profile, unique and complex construction projects. We take great pride in our people and their extraordinary expertise in planning, development, construction and facility management. McGough employee tenure reflects the commitment and pride we share in our work. Ask anyone who knows us - the caliber of our people sets us apart. PROJECT ENGINEER An entry-level position in the project management career path. Responsibilities include: Assisting in project management tasks as assigned by the project management staff Developing skills and progressively take on more responsibility Qualifications: Preferred: Construction Management or related degree Internship, education or field experience Data Center or mission critical experience Office and Travel: Ellendale North Dakota Flexibility for travel is desirable Responsibilities and Tasks: Pursuit, Preconstruction and Business Development Assist pursuit team in understanding prospective projects and requirements Participate in QA/AC page turn sessions McGough Self-Performed Work Understand self-perform capabilities Understand warehouse equipment, rentals, small tools and services Estimating and Bidding Perform quantity take-offs Assist project team in soliciting and reviewing subcontract bids Assist in performing trade scope reviews Scheduling Assist superintendent and project manager with Critical Path Method (CPM) scheduling Learn and understand Last Planner system Participate in daily/weekly work planning Project Documentation Review all drawings and specifications Upload/Download electronic documents and create shortcuts Draft and process Requests for information (RFI) Review and process shop drawings/submittals Participate in BIM coordination meetings Assist in obtaining any LEED documentation Subcontract Management Assist project team in reviewing and processing subcontractor change requests Assist project team in reviewing subcontractor invoices Cost Control Understand change document types and appropriate uses (CCDs, PRs, ASIs, etc.) Assist superintendent in tracking labor costs Assist superintendent with material procurement and cost coding Collect and report cost history data as directed Project Meetings Attend all project and company safety meetings Attend foremen's meetings and draft meeting minutes Attend construction coordination meetings and draft meeting minutes Participate in start-up meetings Participate in PACE meetings Post-Construction Participate in punchlist process and monitor progress Assist superintendent and project manager in preparing final as-built plans and documentation Other Responsibilities Participate in company business development activities (client functions, design firm open houses, conferences, etc.) Establish relationships with clients, architects, engineers, consultants and subcontractors Attend and participate in project management and other company meetings Attend any training - personal and/or professional development - that is relevant to the position Attend company-sponsored events Support and follow standard of work Participate in Lean events and support of the McGough way Physical Requirements: The physical requirements listed here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position involves sitting for extended periods of time at employee's work station and during meetings as well as while traveling, either by plane or car. Employee needs to be able to lift up to 20 pounds as frequently as needed to move objects; dexterity to write and manipulate computer keyboard and mouse; ability to hear and speak clearly; and ability to distinguish between colors on graphs and charts. Occasionally, employee will be required to visit construction jobsites which may expose the employee to dirt, dust, uneven surfaces, outdoor weather conditions and extreme temperatures.

Innovative Concrete, LLC is excited to announce a unique opportunity for military personnel transitioning to civilian life through the DoD SkillBridge program as a Commercial Concrete Field Engineer in North Dakota. This position allows candidates to leverage their military training and experience to gain valuable skills in the concrete and construction industry while supporting our Innovative projects. As a Concrete Field Engineer, you will be responsible for overseeing the technical aspects of concrete projects, ensuring compliance with specifications, managing quality control measures, and liaising between project managers and field teams. This role requires a strong understanding of concrete materials and construction practices, as well as excellent communication and leadership skills. Key Responsibilities: Assist in managing daily operations of concrete projects at various job sites. Review and interpret project plans, blueprints, and specifications. Ensure all work complies with industry standards and safety regulations. Conduct site inspections and quality control assessments to verify the integrity of materials and workmanship. Communicate project progress and challenges with stakeholders and team members. Assist in the training and development of crew members on best practices and safety measures. Prepare project reports, including documentation of materials used, labor costs, and safety compliance. Requirements Qualifications: Must be transitioning military personnel eligible for the DoD SkillBridge program. Must receive commanding officer approval to participate Understanding of construction principles, particularly in concrete work. Excellent problem-solving abilities and attention to detail. Strong communication and interpersonal skills, capable of collaborating with diverse teams. Ability to read and interpret technical documents and blueprints. Experience in project management or a related field is a plus. Must have a valid driver's license and reliable transportation. Willingness to undergo a background check and drug screening. Benefits Paid Holidays Health insurance from a leading provider of employee benefits. Simple, straightforward, and affordable dental insurance. Vision Insurance with one of the largest networks and significant savings and discounts. Aflac Supplemental Insurance: Offers a variety of supplemental plans such as short term disability, etc. Simple IRA through American Funds: Innovative Concrete, LLC will match up to 3%. We offer a great tool to all our employees and their eligible dependents that can help with virtually any distressing life problem, including: Marital & Relationship Counseling, Stress, Anxiety, Depression, grief, substance abuse and more.

Project Engineer (Assistant Project Manager) Industrial Electrical Construction Are you ready to build your career with a leader in industrial electrical engineering, construction, and automation? At Interstates, our Project Engineers (Assistant Project Managers) play a critical role in supporting project teams, partnering closely with field leadership, and keeping complex electrical construction projects running smoothly. You'll gain hands-on experience across project controls, scheduling, coordination, and client interaction-while learning from experienced professionals in a collaborative, people-first environment. Integrity, trust, and safety guide everything we do. No two days look the same, and you'll be challenged to think critically, solve problems, and grow your skills on meaningful projects. Interstates is a dynamic, growing company that invests in your development and supports long-term career paths. Our Culture: Family-Like, By Design * Caring coworkers who treat each other like family * You're valued as an individual-not just a role * Flexible schedules that support work-life balance * Team lunches and social activities that build camaraderie * Opportunities to give back through community and charity events Our Why * Providing opportunities for our people * Making a difference with our clients * Pursuing a better way What You'll Do * Support the Project Manager and jobsite leadership with daily project coordination and controls * Maintain and manage project control systems for the benefit of the project team * Create, update, and communicate CPM schedules * Assist with Last Planner / whiteboard crew scheduling * Prepare and track RFIs, submittals, meeting minutes, and site documentation * Analyze project data and support problem-solving and alternative execution strategies * Assist with estimating take-offs, cost analysis, and change order support * Participate in client meetings and collaborate with trade partners and subcontractors * Prepare materials for and participate in monthly project reviews * Support procurement and expediting of materials and subcontracted work * Promote and model Interstates' safety culture every day What We're Looking For Knowledge, Skills, & Abilities * Strong organizational skills with the ability to prioritize and manage multiple tasks * Willingness to adapt project systems and processes to drive successful outcomes * Strong interpersonal, written, and verbal communication skills * Comfortable interacting with clients, peers, and leadership Education * Bachelor's or Associate degree in Electrical Engineering, Electrical Technology, Construction Management, or a related field Travel & Location * Up to 25% travel to customer sites * Aberdeen, SD will serve as your home base Why Interstates? * Competitive pay and bonus incentives * 401(k) to help you plan for the future * Health, dental, and vision insurance with multiple plan options * Paid vacation-when you're off, we encourage you to truly unplug * Disability and life insurance * Clear advancement opportunities with onsite career coaching At Interstates, our success starts with yours. If you're looking for a role where you can learn fast, contribute meaningfully, and build a long-term career in industrial construction-we'd love to meet you.