Applied Materials jobs in Arlington, TX - 430 jobs

The Project Manager is responsible for planning, executing, and delivering end-to-end implementation of a distribution network across designated regions. This role leads cross-functional teams (Supply Chain, Logistics, IT, Finance, Quality, EHS, and Commercial) to design network topology, onboard/stand up 3PLs/DCs, integrate systems (WMS/TMS/ERP), and achieve target service levels, cost, and reliability. Success is measured by Safety, Quality, Delivery, and Cost outcomes, including on-time go-lives, inventory accuracy, OTIF performance, and budget adherence. There are two positions which are both open to remote consideration. One of the positions will require up to 25-30% domestic travel. The second position will require up to 75% international travel for the first 3-6 months. **Job Description** **Key Responsibilities** + Lead full lifecycle projects to stand up or reconfigure distribution centers (DCs), forward stocking locations (FSLs), and 3PL operations + Drive development of network design, capacity, and location strategy in partnership with Supply Chain and Logistics Engineering + Establish and manage integrated project plans, schedules, budgets, risks, and change control + Oversee facility readiness: layout, racking, material flow, EHS compliance, security, and regulatory requirements + Manage system integrations and cutovers: WMS/TMS/ERP, EDI, labeling/compliance, and master data readiness + Define and implement standard operating procedures (SOPs), SLAs, and KPIs; ensure training and work instructions are in place + Coordinate 3PL selection and start-up: RFPs, contracts/SOWs, implementation, performance governance + Execute inventory migration, slotting, and ramp plans; validate cycle counts and inventory accuracy + Lead hypercare and stabilization; implement root cause actions to reach steady-state performance + Report progress, risks, and mitigations to stakeholders and leadership; ensure alignment to business case + Champion continuous improvement and lean practices to optimize throughput, cost, and service + Ensure compliance with EHS, quality, trade, and cybersecurity requirements **Required Qualifications** + Bachelor's Degree from an accredited college or university (or a high school diploma/GED with a minimum of 4 years project/program management, logistics, distribution or manufacturing experience) + minimum of 3 years project/program management, logistics, distribution or manufacturing experience **Desired Qualifications** + Bachelor's degree in Supply Chain, Industrial Engineering, Operations, Business, or related field; advanced degree or PMP/Prince2 a plus + Proven experience launching DCs/FSLs or onboarding 3PLs and executing WMS/TMS implementations and cutovers + Strong understanding of network design, inventory management, transportation, and warehouse operations + Demonstrated ability to manage large cross-functional teams and external partners + Proficiency with project tools (e.g., MS Project/Smartsheet), data/analytics (Excel, SQL/BI a plus), and process mapping + Excellent communication, stakeholder management, and vendor negotiation skills + Experience with EDI, labeling/compliance standards, and master data governance preferred + Knowledge of EHS, trade compliance, and quality management systems in distribution environments **Key Metrics (SQDC)** + Safety: Recordable incident rate, compliance audit results + Quality: Inventory accuracy %, ASN/label compliance, damage/defect rate + Delivery: On-time go-live, OTIF/Fill rate, dock-to-stock time, order cycle time + Cost: Budget adherence, cost-to-serve, 3PL productivity and rate performance **Competencies** + Strategic planning and execution + Risk management and issue resolution + Vendor/3PL management and contracting + Systems integration and data readiness + Change management, training, and SOP deployment + Continuous improvement/lean mindset + Analytical problem solving and decision-making + Clear, concise communication **Travel** + There are two positions which are both open to remote consideration. One of the positions will require up to 25-30% domestic travel. The second position will require up to 75% international travel for the first 3-6 months. The salary range for this position is $94,000 - $145,000 USD Annual. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. This posting is expected to close on February 3, 2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

The Military Field Service Representative (FSR) located in Tolemaida, Colombia, will support the Colombian military in their operation, management, repair, installation, and maintenance of assigned GE equipment for starting up and operating a T700 engine depot. In this role, the FSR will act as a liaison between GE Aerospace and the customer. Candidates must be mobile to meet the needs of the customer, program and business. **Job Description** **Job Title** T700 Depot Military Field Service Representative - Tolemaida, Colombia **Company Intro/About GE Aerospace** GE Aerospace is a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We power flight safely and reliably for today, tomorrow, and the future, partnering closely with customers to deliver high-quality outcomes with speed and efficiency. **Site, Business, OR Functional Area Overview** This role supports the startup and sustained operation of a T700 engine depot in Tolemaida, Colombia, serving the Colombian military's helicopter fleet. The Field Service organization is focused on operational readiness, on-time delivery, and cost-effective maintenance solutions that meet contractual and mission requirements. **Role Overview** The Military Field Service Representative (FSR) will serve as GE Aerospace's on-site liaison to the Colombian military, supporting depot startup and ongoing repair, installation, troubleshooting, and maintenance activities for T700 turboshaft engines. The FSR will coordinate technical support, drive issue resolution, and enable customer success while meeting contractual, safety, and quality objectives. **Key Responsibilities** + Act as the single point of contact to the customer for timely resolution of depot-level tooling, maintenance, repair, and engine management concerns + Establish and maintain strong on-site relationships to provide ongoing technical and business support + Provide hands-on technical assistance leveraging in-depth knowledge of T700 installation, operation, and troubleshooting to keep the customer on schedule + Use disciplined analytical methods to drive root-cause analysis; create presentations and spreadsheets (including pivot tables and Pareto charts) to track issues and implement lasting corrective actions + Exercise sound judgment to propose solutions beyond set parameters for complex maintenance and troubleshooting scenarios, drawing on internal and external resources + Lead low-risk projects and serve as a resource for colleagues; explain technical concepts and build consensus across maintenance, engineering, and management stakeholders + Uphold and promote safety, quality, delivery, and cost objectives; ensure compliance with export control and security requirements **Required Qualifications** + Fluent in Spanish and English (reading, writing, and speaking) + Bachelor's degree from an accredited college or university; or a High School Diploma/GED plus a minimum of 4 years in a field service representative or jet engine maintenance role + Minimum 3 years of field maintenance, modification, and repair experience on T700 engines + Strong oral and written communication skills with demonstrated ability to analyze and resolve problems + Ability and willingness to travel as required + Ability and willingness to obtain and maintain a U.S. Government security clearance **Desired Characteristics** + 5+ years of hands-on turboshaft engine maintenance experience + T700 experience across depot, organizational, intermediate, and flight line troubleshooting levels + Strong customer interaction and communication skills; proven leadership abilities + Demonstrated proficiency in repair troubleshooting, shop operations, testing of jet engines, and support equipment tooling + Ability to make formal presentations to maintenance, engineering, and management at all levels + Project management experience; ability to lead and influence customers and peers + Experience mentoring and transferring technical knowledge; strong written and oral communication + Ability to work independently with technical guidance as needed + High degree of tact and diplomacy to collaborate effectively with customers at all levels + FAA Powerplant license (preferred) **Additional Information** The base pay range for this position is $100,000.00-133,000.00 USD Annual The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 23rd, 2026 GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage, access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits includ tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time -off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or prog rams (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. © 2023 GE Aerospace and/or its affiliates. All rights reserved. Attorney-Client Privileged **Closing** At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Closing At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherw _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Enjoy a rewarding career with Lockheed Martin Aeronautics Field Sustainment (AFS) supporting operations in a very active and high operational tempo Site Manager position at RAF Lakenheath, United Kingdom. Our team is responsible for overseeing all on-site F-35 contractor support operations at RAF Lakenheath and will be the primary customer liaison to USAF leadership at the base. What You Will Be Doing · Report to the AFS Field Operations Regional Lead and maintains close coordination with the Sustainment Program Manager in the management of Performance Based Logistics requirements. · Have overall responsibility for on-site contractor technical services, Autonomic Logistics Information System (ALIS), contractor logistics support (CLS) maintenance, Field Support Engineers (FSE), training system support, support equipment coordination, support for local Maintenance, Upgrade, and Overhaul (MUO) activities, and sustainment spares warehouse liaison services. · Communicate squadron priorities and needs to the Lightning Support Center (LSC) and to key Program Management personnel to resolve critical maintenance and supply issues. · Work closely with on-site Pratt & Whitney FSEs to ensure that all F135 support impacts are resolved in a timely and efficient manner. · Manage project / support resources in compliance with cost goals and operating budgets and maintain a sustained growth of technical and professional competence of the on-site support team. · Be responsive to the operational and support concerns of USAF leadership at RAF Lakenheath and ensure responsive support is provided by contractor support activities. · Coordinate and supports industry visits and Contractor Field Team (CFT) assists. · Have management tasks that include, but are not limited to, oversight of all on-site contractor activities, planning and scheduling of on-site teamwork assignments (including potential contractor deployment packages), enforcement of safety and physical security procedures and directives, and management of labor charges and administrative documentation. · Ensure personnel compliance with program, company, and government agency policies and procedures and coordinate staffing and training requirements. · Be willing to deploy, as required, for a long- term assignment, work any shift, and weekends. Some travel may be required. Candidates must be willing and able to deploy with Customer personnel to hazardous duty location. US Department of Defense (DoD) mandated vaccinations may be required. · Be subject to a government security investigation and must meet eligibility requirements for access to classified information. · Must be a United States citizen and must possess a Secret Security Clearance. Who You Are Leadership: You have the impactful ability to inspire, motivate, and guide teams toward achieving goals while fostering a positive work environment. Communication: You have strong verbal and written communication skills to convey information clearly and facilitate collaboration among team members and stakeholders. Mentor and Coach: You are passionate about developing others, providing mentorship and guidance to empower your team to reach their full potential. What's In It For You: From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin's comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus -if you have the passion and courage to dream big, work hard, and have fun doing what you love then we want to build a better tomorrow with you. aeroafs #OneLMHotJobs aerosystems oconusreq Basic Qualifications The following Basic Qualifications are skills that a candidate must possess to be considered for this position: · Minimum 15 years of aircraft aviation experience. At least 10 of those years must include fighter operations / maintenance or 5th-gen information system (ALIS/IMIS) experience. · Demonstrated experience working and interacting with senior management within unit operations and maintenance communities. · Fighter aircraft maintenance and operations leadership experience · Working knowledge of F-35 maintenance and operations · Experience leading a workforce. · Demonstrated experience managing product / system engineering support. · Knowledge of pilot or maintainer systems & processes, and/or logistics support · Experience managing product / system engineering support. · Understanding of managing cost and schedule using Earned Value Management (EVM). Desired skills The following Desired Skills are not required but are those skills that would set a candidate apart from the other candidates: · Bachelor's degree /advanced degree · Candidate should possess a broad military aircraft support background and advanced interpersonal and communication skills to be effective in a high tempo operational environment. · Ability to effectively communicate with supporting companies (Pratt & Whitney, NGC, etc.) and local base authorities is critical for success. · Prior military/civilian equivalent operational maintenance & logistics experience desirable; specifically, organizational and intermediate maintenance experience. · Should be considered an expert authority in the maintenance, operations, and support disciplines. · Familiarity with the F-35 logistics, autonomic logistics information system (ALIS), technical publications approach and supportable low observable support concept beneficial. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. * At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Other Important Information By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to work remotely Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedule Information Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Security Clearance Information This position requires a government security clearance, you must be a US Citizen for consideration. Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $138,100 - $243,455. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year. This position is incentive plan eligible. Pay Rate: The annual base salary range for this position in most major metropolitan areas in California, Massachusetts, and New York is $158,800 - $275,195. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. This position is incentive plan eligible.

Responsible for operating in alignment with FLIGHTDECK Fundamentals and Behaviors to create a clear strategic direction for development needs and convey that vision to the DevOps team. You will direct the team that manages an IFS ERP environment with a clear and descriptive set of requirements, balancing the need for new features, defect resolution, operational rigor and technical debt. This role prioritizes seamless integration and alignment of perspectives from a broad set of stakeholders: Product Managers, Technical Architects, Product Owners, and Developers. Additionally, you will manage government contract commitments, oversee the financials associated with those commitments, and collaborate with GE Aerospace Program Managers to integrate digital warehouse, inventory, and MRO capabilities into sustainment contracts. **Job Description** **Roles and Responsibilities** **In this role, you will:** + Activate FLIGHTDECK Fundamentals to drive Safety, Quality, Delivery, and Cost (SQDC) excellence in product development and execution. + Demonstrate superior product and industry knowledge, helping the organization gain a competitive edge through customer-driven execution. + Interact with customers/stakeholders to gather Voice of Customer (VOC) requirements, refine priorities, and obtain product feedback. + Collaborate with cross-functional teams to deliver features and major, complex products using Value Stream Management to eliminate waste and optimize delivery. + Possess a deep understanding of the technology stack and its impact on the final product, ensuring alignment with Standard Work principles. + Routinely collaborate with UX, Architecture, and engineering teams to resolve issues and make decisions that align with FLIGHTDECK Behaviors: Respect for People, Continuous Improvement, and Customer Driven. + Conduct customer and stakeholder interviews, elaborating on personas and driving customer-focused prioritization. + Own the release and sprint backlogs, ensuring readiness for multiple releases in a year. + Continuously prioritize backlog items based on customer needs and problem validation. + Demonstrate strategic expertise in problem decomposition and navigating ambiguity using structured problem-solving techniques. + Engage frequently with the development team (50% of the time), facilitating discussions, providing clarification, story acceptance, refinement, testing, and validation. + Translate unstructured or ambiguous work requests into actionable user stories and work units, leveraging Action Planning to ensure alignment with KPIs and TTIs. + Partner with Development Leadership to ensure a healthy development process and adherence to Operating Cadences. + Manage government contract commitments, ensuring compliance with timelines, deliverables, and reporting requirements. + Oversee the financial performance of government contracts, ensuring alignment with budgetary goals and strategic objectives. + Collaborate with GE Aerospace Program Managers to integrate warehouse, inventory, and MRO digital capabilities into sustainment contracts, driving efficiency and customer value. + Mentor junior team members and provide technical leadership to TPMs across the organization, coaching others in Agile Methodology and lean principles. **Minimum Qualifications:** + Bachelor's degree from accredited university or college with minimum of 5 years of professional experience OR Associates degree with minimum of 8 years of professional experience OR High School Diploma with minimum of 10 years of professional experience + Minimum 5 years of professional experience in Technical Product Management + Note: Military experience is equivalent to professional experience **Eligibility Requirement:** + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job. **Technical Expertise:** + Experience working in an Agile environment, with familiarity in Flow/Pull principles. + Demonstrates knowledge on technical topics such as caching, APIs, data transfer, scalability, and security. + Familiarity with managing an ERP solution, specifically IFS. **Business Acumen:** + Skilled in breaking down problems, documenting problem statements, and estimating efforts using FLIGHTDECK. + Demonstrates the initiative to explore alternate technology and approaches to solving problems. + Skilled in negotiation to align stakeholders and communicate a single perspective to the DevOps team. + Demonstrates knowledge of the competitive environment and technologies in the market to make buy vs. build recommendations, scope MVPs, and drive market timing decisions. **Leadership:** + Influences through others, building direct and "behind the scenes" support for ideas. + Continuously reflects on success and failures to improve performance and decision-making. + Understands when change is needed and participates in technical strategy planning aligned with FLIGHTDECK Behaviors. **Personal Attributes:** + Proactively engages with cross-functional teams to resolve issues and design solutions using critical thinking and structured problem-solving. + Energizes others toward a common vision and goal, maintaining excitement for the process even when setbacks occur. + Innovates and integrates new processes and/or technology to significantly add value to GE Aerospace. **For Candidates in the US:** The base pay range for this position is $131,000 - $218,000 annually. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 31st, 2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Change the world. Love your job. As a Software Engineering Intern, you'll become a key contributor where your skills and input make a big difference. In this role, you'll design embedded software and development tools that will be used to test products. You'll write code that tells chips how to operate in revolutionary new ways. And, you'll work closely with business partners and customers, as well as TI's marketing, systems and applications engineering teams, to collaborate and solve business problems. Put your talent to work with us as a Software Engineering Intern ! Texas Instruments will not sponsor job applicants for visas or work authorization for this position. Minimum Requirements: Currently pursuing a undergraduate or graduate degree in Electrical Engineering, Electrical and Computer Engineering, Computer Engineering, Computer Science or related field Cumulative 3.0/4.0 GPA or higher C programming skills Familiarity with assembly language programming Knowledge of software engineering processes and the full software development lifecycle Preferred Qualifications: Demonstrated analytical and problem solving skills Strong written and verbal communication skills Ability to work in teams and collaborate effectively with people in different functions Strong time management skills that enable on-time project delivery Ability to build strong, influential relationships Ability to work effectively in a fast-paced and rapidly changing environment Ability to take the initiative and drive for results

Change the world. Love your job. We're looking for a sharp, curious, and ambitious Internal Auditor to join our Controls/ICFR team. Our team collaborates with our business partners, tackles meaningful work that shapes how the business operates and safeguards its future. You'll have the autonomy to own your control areas from start to finish, uncover insights that others miss, and deliver recommendations that leadership truly acts on. Leverage your audit expertise in a role where your work will be valued, visible and influential. What You'll Do Drive the control environment - Perform detailed internal control over financial reporting (ICFR) audits, Internal Control Checklist (ICC) and help educate on controls Think like an investigator-spot discrepancies and control weaknesses that others overlook, and turn them into actionable insights. Build audit plans to strengthen the control environment- develop and execute systematic audit plans focusing on financial control processes Present findings with confidence - engaging senior leaders in discussions that drive improvements. Own your projects-independently run large or complex audits, balancing multiple priorities without sacrificing quality. Collaborate with external auditors -serving as a trusted partner to answer questions, discuss risk and discuss control solutions Set the bar high-consistently deliver results ahead of schedule and elevate the standards of the audit function. Minimum requirements Bachelor's degree in Accounting, Business Administration, Finance or related field 3+ years of relevant work experience, Internal Audit or Big Four accounting firm experience highly preferred Certification as CPA or CIA Proven ability to conduct complex audits with minimal oversight Working knowledge of U.S. GAAP and compliance with internal controls and Sarbanes-Oxley/SOX Preferred qualifications Sharp analytical skills, with the ability to use statistical tools and data analysis to uncover insights. Proficiency with technology including MS Office applications; experience with analytics tools such as Power BI, Alteryx, Qlikview or Tableau Willingness to travel Exceptional communication, both written and verbal, and presentations to senior leadership. Strong program management skills A self-starter mindset, with the discipline to juggle multiple priorities without compromising results.

You will be the Contractor Logistics Support (CLS) Battery Lead for the THAAD Missile Defense Team. Our team partners with the Royal Saudi Air Defense Force (RSADF) to operate, maintain, and emplace the Terminal High Altitude Area Defense (THAAD) system in the Kingdom of Saudi Arabia, while supporting U.S. Army material management standards. What You Will Be Doing As the CLS Battery Lead you will be the day to day focal point for 2 5 logistics specialists, guiding all maintenance, sustainment, and training activities for the THAAD battery. You'll split your time between a 2 to 4 year OCONUS deployment in KSA and a CONUS home base at Fort Bliss, TX, where you'll complete pre deployment training and coordinate with program leadership. Your responsibilities will include: • Acting as the primary CLS point of contact for RSADF operational leaders, providing clear status and advice on THAAD maintenance. • Supervising and directing the daily work of 2 5 CLS personnel to ensure compliance with U.S. Army Material Maintenance Management concepts and procedures. • Delivering field and sustainment level maintenance support for THADF equipment, including troubleshooting beyond the Enhanced Operator/Maintainer (EOM) level. • Managing the RSADF maintenance and sustainment program: scheduling services, overseeing system upgrades, and coordinating modifications. • Preparing and delivering transition training so RSADF maintainers assume full responsibility for the battery. • Conducting daily maintenance briefings with the RSADF Commander (or designated rep) and reporting status and administrative requirements to senior leadership. • Requesting Engineering Reach Back support for complex issues and ensuring rapid resolution. • Maintaining open, candid communication channels with RSADF, U.S. Government representatives, and Lockheed Martin leadership to build trust and confidence. • Living on site in housing near the KSA THAAD battery and participating in all required pre deployment and sustainment activities. Why Join Us You are a collaborative, proactive logistics professional who thrives in multinational environments and can lead small, high performing teams under demanding conditions. This role offers a unique blend of technical challenge, cultural immersion, and strategic impact-directly supporting a cornerstone of allied missile defense capability. You'll gain extensive hands on experience with cutting edge THAAD systems, develop deep relationships with Saudi and U.S. defense partners, and enjoy the career building benefits of long term overseas assignment while still anchored to a supportive home base at Fort Bliss. If you're ready to lead, innovate, and make a tangible difference in global security, apply now. We are committed to supporting your work-life balance and overall well-being, offering flexible scheduling options Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity: This position is in Grand Prairie, TX. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. The selected candidate must be able to obtain a secret clearance. A company-sponsored interim secret is required to start. Basic Qualifications • Relevant experience working as a Field Service Technician (or similar position) • Previous experience with the THAAD system (or similar system) • Active U.S. Department of Defense SECRET (or Interim SECRET) Security Clearance • A valid U.S. Passport with no restrictions on travel • Willingness to perform these duties in KSA for the total duration of this assignment • Ability to meet KSA Iqama (residence permit/visa) requirements • Excellent oral and written communication skills are essential • Candidate must be able to maintain a good working relationship with the customer • Candidate may also be required to take a post-offer, pre-employment physical to determine deployability capabilities as defined by the contract **Candidate must be able to obtain a CompTIA Security + certification within 90 days of start date Desired skills • Technical engineering degree and / or military background • Previous experience as a THAAD or Patriot Field Service Technician or Contractor Logistics Support Technician • Previous experience as a THAAD CLS Team Lead experience • CompTIA A + Certified • Hazardous Materials (HAZMAT) Certification • Comp TIA Security + Certified • Commercial Driver's License (CDL) • Previous experience working with the KSA armed forces • Previous experience executing maintenance management in a military environment (US Army, foreign military, or similar) • Basic knowledge of: - Reading and interpreting engineering drawings/schematics - Applying fault detection/isolation procedures - Networks (e.g. LAN, WAN, IP address schemes) - Unix and Linux - Electrical/mechanical aptitude - Hydraulic operations - Army Supply System - Ability to apply appropriate Packaging, Handling, Storage, and Transportation - Ability to manage and account for inventory • Other desired military (MOS) training: - 14A / 140A / 140E / 14E / 14H / 14T Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. * Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They're dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about. As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Other Important Information By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to work remotely Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedule Information Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Security Clearance Information This position requires a government security clearance, you must be a US Citizen for consideration. Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $73,800 - $130,180. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year. This position is incentive plan eligible. Pay Rate: The annual base salary range for this position in most major metropolitan areas in California, Massachusetts, and New York is $84,900 - $147,085. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. This position is incentive plan eligible.

Do you have a passion for leveraging data, analytics, and AI to drive meaningful change? At GE Aerospace, we are transforming supply chain processes to address one of our most critical business challenges: delivery. As a Staff Enterprise Application Engineer specializing in Palantir, you will utilize your expertise in Palantir Foundry and AWS cloud technologies to design, deploy, and tailor solutions for complex aerospace challenges. In this role, you will build and maintain Foundry pipelines, modular applications, and workflows, while working closely with stakeholders to create cutting-edge solutions using ontology, advanced analytics, and AI. **** **Roles and Responsibilities** + Architect and design sound/supportable technical solutions to complex business requirements + Develop and maintain Foundry pipelines using Pipeline Builder to ingest, transform, and integrate data. + Build modular applications and workflows leveraging Python, and Foundry AIP. + Collaborate with data engineers, analysts, and stakeholders to refine data models and ontology mapping. + Assist in Foundry workshops to guide stakeholders through platform capabilities. + Support testing, debugging, and performance tuning of Foundry applications. + Work with aerospace data to identify patterns, trends, and insights using Palantir Foundry and AWS analytical tools. + Develop custom applications and workflows within Foundry and AWS to address specific challenges. + Ensure data integrity and compliance with aerospace industry standards. + Apply lean methodologies to identify opportunities for process improvement. + Share feedback with Palantir and AWS product teams to enhance tools and workflows. + Provide technical coaching and direction to more junior teammates. **Technical Qualifications** + Strong experience in Python, PySpark, and front-end frameworks like React, Angular, or Vue.js. + Experience with Pipeline Builder, AIP, and Foundry's application development ecosystem. + Proficiency in AWS cloud services such as EC2, S3, Lambda, RDS, and CloudFormation. + Experience with Git-based code repositories and CI/CD workflows. **Minimum Qualifications** + Bachelor's degree from accredited university or college with minimum of 4 years of professional experience OR associate's degree with minimum of 7 years of professional experience OR High School Diploma with minimum of 9 years of professional experience + Minimum 3 years of professional experience in Computer Science or "STEM" Majors (Science, Technology, Engineering and Math) + **Note:** Military experience is equivalent to professional experience The base pay range for this position is $110,700- $184,600. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on October 31, 2025. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs ( _i.e_ ., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. **Eligibility Requirement:** + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job. **Desired Characteristics** + Ability to operate in an ambiguous environment as we establish this transformation program and define roles & responsibilities. + Demonstrated ability to quickly understand new concepts and analyze system deficiencies + Passionate about security and the quality of the applications they support + Organized, thorough, and detail oriented + Collaborates well with others to solve problems and actively incorporates input from various sources + Eager to learn, shares ideas, encourages and accepts feedback well + Strong analytical skills - strong problem-solving skills, communicates in a clear and succinct manner and effectively evaluates information / data to make decisions; anticipates obstacles and develops plans to resolve + Demonstrated customer focus - evaluates decisions through the eyes of the customer; builds strong customer relationships and creates processes from the customer's viewpoint + Experience working with an offshore development team + High level of energy and enthusiasm, with the ability to thrive in a dynamic, fast-paced setting + Comfortable with empowering colleagues and inspiring others to be their best **Note:** To comply with US immigration and other legal requirements, it is necessary to specify the minimum number of years' experience required for any role based within the USA. For roles outside of the USA, to ensure compliance with applicable legislation, the JDs should focus on the substantive level of experience required for the role and a minimum number of years should NOT be used. This Job Description is intended to provide a high-level guide to the role. However, it is not intended to amend or otherwise restrict/expand the duties required from each individual employee as set out in their respective employment contract and/or as otherwise agreed between an employee and their manager. **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

The Pricing Technical Program Manager (TPM) plays a critical role within the S&M Commercial Operations organization, enabling GE Aerospace to deliver accurate, strategic, and data-driven pricing across products and services. This role manages end-to-end technical execution for pricing capabilities, ensuring our Pricing tools and framework are aligned, automated, and scalable across global Sales and marketing processes. The TPM partners closely with Pricing Strategy, Deal Teams, Data Science, and DT engineering teams to translate business strategy into technical requirements and orchestrate delivery across complex systems and data flows. This position ensures seamless integration between pricing models, analytics, approvals workflows, and customer-facing tools, while driving standard work, data quality, and continuous improvement. The TPM will direct the team with a clear and descriptive set of requirements and partner with the team to determine what can be delivered through balancing the need for new features, defects, and technical debt. Priority is seamless integration and alignment of perspectives from a broad set of stakeholders: Product Managers, Functional stakeholders, Product Owners and Developers. *Preference given to candidates that are able to supporting Eastern Standard Time Zone hours* **Job Description** **Roles and Responsibilities** + Demonstrate superior product and industry knowledge and helps organization to gain the competitive edge. + Interacts with customers/stakeholders in VOC requirements-gathering, fine tuning, and obtaining product feedback. + Works with cross-functional teams to deliver features and major, complex products. + Possesses a deep understanding of the technology stack and impact on final product. + Routinely collaborates with UX, Architecture and engineering teams on multiple issues and decisions. + Conducts customer and stakeholder interviews and elaborates on personas. + Demonstrates expert persuasion and influencing skills that ensure alignment between customer, product manager and engineering teams. + Owns the release and sprint backlogs short-term roadmap for MVPs and quarterly releases. + Owns and manages the backlog; continuously orders and prioritizes to ensure that 1-2 sprints/iterations of backlog are always ready. + Prioritize continuously in accordance with the understanding and validation of customer problems and needs. + Demonstrates strategic expert level skills in problem decomposition and ability to navigate through ambiguity. + Engages frequently (50% of the time) with the development team; facilitates discussions, provides clarification, story acceptance and refinement, testing and validation; contributes to design activities and decisions. + Translates unstructured or ambiguous work requests into actionable user stories and work units. + Partners with Development Leadership to ensure healthy development process. + Mentors junior team members. + Provide technical leadership to TPMs across organization. Expert in Agile Methodology: Coaches others. **Education Qualification** + Bachelor's degree from accredited university or college with minimum of 5 years of professional experience OR Associates degree with minimum of 8 years of professional experience OR High School Diploma with minimum of 10 years of professional experience + Minimum 5 years of professional experience in technical product management. + Note: Military experience is equivalent to professional experience **Eligibility Requirement:** + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job. **Desired Characteristics** **Technical Expertise:** + SFDC experience/exposure + Strong knowledge of software design, coding principles and visualization + Experience working in an Agile environment + Familiarity with versatile implementation options + Demonstrates knowledge on technical topics, such as caching, APIs, data transfer, scalability, and security **Business Acumen:** + Demonstrates the initiative to explore alternate technology and approaches to solving problems + Skilled in breaking down problems, documenting problem statements and estimating efforts + Has the ability to analyze impact of technology choices + Skilled in negotiation to align stakeholders and communicate a single synthesized perspective to the scrum team. Balances value propositions for competing stakeholders. + Demonstrates knowledge of the competitive environment + Demonstrates knowledge of technologies in the market to help make buy vs build recommendations, scope MVPs, and to drive market timing decisions **Leadership:** + Influences through others; builds direct and "behind the scenes" support for ideas. Pre-emptively sees downstream consequences and effectively tailors influencing strategy to support a positive outcome. + Able to verbalize what is behind decisions and downstream implications. Continuously reflecting on success and failures to improve performance and decision-making. + Understands when change is needed. Participates in technical strategy planning. **Personal Attributes:** + Able to effectively direct and mentor others in critical thinking skills. Proactively engages with cross-functional teams to resolve issues and design solutions using critical thinking and analysis skills and best practices. Finds important patterns in seemingly unrelated information. + Influences and energizes other toward the common vision and goal. Maintains excitement for a process and drives to new directions of meeting the goal even when odds and setbacks render one path impassable. + Innovates and integrates new processes and/or technology to significantly add value to GE. Identifies how the cost of change weighs against the benefits and advises accordingly. Proactively learns new solutions and processes to address seemingly unanswerable problems. Additional Information: The base pay range for this position is $127,000 - $213,000 annually. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 9th, 2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

SummaryFuel your career where precision meets purpose. As an Aircraft Maintenance Technician, you'll be the go-to expert turning complex engine challenges into safe, quick-turn solutions-diagnosing issues, performing line maintenance, and executing shop repairs that keep aircraft engines ready to fly. If you take pride in craftsmanship, thrive in a fast-paced environment, and are driven by safety and quality, this role puts you at the heart of the action.Job Description Essential Responsibilities: Perform maintenance and repairs on GE/CFM aircraft engines to the highest standards of safety and quality. Partner closely with the planning team and CVG inspectors to execute business priorities and meet delivery commitments. Interpret and follow the applicable Aircraft Maintenance Manual and Engine Shop Manual procedures with precision. Apply strong working knowledge of Quality Procedures and FAA/EASA Part 145 requirements; operate in compliance with the Repair Station and Quality Control Manual and all applicable regulations. Maintain a clean, organized, and audit-ready work area; perform supplementary shop and housekeeping duties as needed. Take ownership of assigned tasks and projects-plan, execute, and follow through to completion with accountability. Work second shift as your regular assignment with the potential to support the field. Complete initial training on first shift for your first 6 months. Qualifications / Requirements: Minimum High School diploma / GED Federal Airframe and Power Plant Mechanic (A&P) license required. Desired Skills / Experience: Large commercial engine repair: Minimum 6+ months hands-on experience; prior GE On Wing Support co-op/internship a plus. Product expertise: Experience on LEAP, GE90, CFM56, CF6, CF34, and/or GEnx platforms. Line and module work: Proven capability in line maintenance, engine changes, module removal/installation, and LRU R&I with proper tooling and torque control. Problem solving and communication: Strong diagnostic mindset, clear communicator across shifts and functions; escalates early to protect safety and quality. Growth mindset: Demonstrated curiosity and adaptability to new tools and technology; committed to continuous learning. Quality and compliance: Track record meeting first-pass quality and minimizing escapes; works to FAA/EASA Part 145 and internal Quality Procedures. Customer focus: Delivers to plan, supports quick-turn commitments, and represents the team professionally on- and off-wing. NDT proficiency: Level II experience in Ultrasonic, Eddy Current, and Fluorescent Penetrant Inspection preferred. #LI-ST1 This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Corporate DT AI Catalyst will partner closely with the business to define and drive its most critical AI use cases. This executive will develop strong relationships with cross-functional stakeholders to best understand each departments' needs and develop the ideal AI roadmap for Corporate Functions Leaders including Trailing Operations. The AI Catalyst will serve as an AI thought leader and change agent across the business, helping ensure leaders and teams understand the added value the AI initiatives, tools, and best practices will ultimately bring to each function and product. Additionally, the AI Catalyst will lead seamless implementation & change management of all AI-powered solutions across Corporate DT, ensuring strong adoption impact and promoting a culture of continuous improvement & innovation firmwide. **Job Description** **Key Responsibilities:** + Defines and prioritizes AI use cases based on business needs. Collaborates with various departments to understand their challenges and opportunities and develop a roadmap for AI initiatives that deliver measurable business value. + Helps business leaders and teams understand how to use AI. Provides training and resources to ensure a comprehensive understanding of AI concepts, tools, and best practices, enabling informed decision-making and effective implementation. + Facilitates adoption of AI-enabled solutions within the company. Work closely with stakeholders to ensure seamless adoption, address any resistance or concerns, and promote a culture of innovation. + Monitors the performance and impact of AI initiatives, adjusting as needed to optimize outcomes and drive continuous improvement. + Key Leader in Data Organization & Protection: Oversee data architecture, engineering, platforms, and governance, ensuring a robust, scalable, and secure data ecosystem. + Cross-Functional Leadership: Collaborate with engineering, digital, product, and business leaders to embed AI and data-driven decision-making across the organization. + Regulatory & Ethical AI Governance: Ensure AI solutions meet industry, regulatory, and ethical standards, particularly in aerospace and defense applications. **Required Qualifications / Experiences** + Bachelor's degree in computer science, STEM Majors (Science, Technology, Engineering, and Math), or equivalent experience. + Minimum of 7 years of professional experience in IT leadership roles, with at least 5 years of experience leading global teams. + Proven expertise in designing and deploying enterprise-level data management / AI solutions. + Demonstrated ability to lead and influence cross-functional teams in a matrixed environment. + **Note** : Military experience is equivalent to professional experience **Eligibility Requirement:** + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job. The base pay range for this position is $176,000- $293,300. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on December 31, 2025. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs ( _i.e_ ., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. **Qualifications:** + Data Management, Interpretation and Processing: Adept at organizing, analyzing, and transforming data to extract meaningful insights and support informed decision-making. + Cloud Computing: Experience with cloud platforms like AWS, Google Cloud, and Azure for deploying and scaling AI solutions. + Business Acumen: Understands business operations, market dynamics, and financial principles to make strategic decisions. Operational Excellence: Executes business processes efficiently and effectively to achieve optimal business performance. + Experienced in Programming Tech & Tools: Expertise in languages such as Python, R, and SQL. + Strong Program Management & Organizational Skills: Spearhead all dimensions and layers within the organization to deliver on time, on budget solutions and deliverables. + Team player who prioritizes customer solutions and business objectives and unyieldingly leverages lean practices (FLIGHT DECK, GE's proprietary lean operating model) + Multi-faceted data science expert-capable of operating at a strategic level while also being hands-on ("Go to Genba") to collaboratively solve problems. + Embodies GE Aerospace's 'One Culture' characteristics: + Passionate Innovator - Drives AI and data-driven innovation to create new business opportunities. + Developer of World-Class Talent - Builds and nurtures high-performing AI and data teams. + Accountable Owner - Takes full ownership of initiatives with a focus on execution and results. **Key Competencies:** + Strategic Business Acumen + Change Leadership & AI Advocacy + Innovative Problem-Solving + Cross-Functional Influence and Collaboration + Operational Excellence - leading programs and initiatives to deliver measurable results + AI/ML/Data Science Proficiency + Data Management, Interpretation and Processing + Cybersecurity and Risk Management + Cloud Computing platforms, managing AI solutions efficiency & effectively + Programming Language Proficiency _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Change the world. Love your job.: In your first year with TI, you will participate in the Career Accelerator Program (CAP), which provides professional and technical training and resources to accelerate your ramp into TI, and set you up for long-term career success. Within this program, we also offer function-specific technical training and on-the-job learning opportunities that will encourage you to solve problems through a variety of hands-on, meaningful experiences from your very first day on the job. The TMG Development program is a 12-month program for new college graduates in the TMG organization. About This Opportunity Join our Memory IP Validation team within the Advanced Technology Development organization. You'll characterize cutting-edge memory circuits (SRAM, Flash, EEPROM, eFuse) on advanced technology nodes-working on IP that powers next-generation smartphones, AI accelerators, data centers, and automotive systems. This role combines hands-on silicon characterization, test automation, and cross-functional collaboration with worldwide teams. You'll work with 300mm development wafers, analyze performance data, and help qualify innovative memory IP designs for customer integration. If you're passionate about bringing circuits from design to reality and solving complex technical challenges, this is an excellent place to start your career. Why This Role Matters As part of the Technology Development team, you'll enable next-generation memory technologies through comprehensive characterization. Your silicon feedback shapes design decisions and qualifies innovative IP for cutting-edge products-bridging the gap between circuit design and silicon reality on tomorrow's technologies. What You'll Gain * Advanced characterization techniques and statistical analysis methodologies * Root cause investigation skills during technology development * Experience qualifying IP from concept through production readiness * Cross-functional collaboration with designers, process engineers, and business units * Career paths in validation, product engineering, design, or advanced technology development * Structured onboarding, dedicated mentorship, and hands-on training Who will you work with? Circuit designers, process development engineers, failure analysis teams, and business units. What You'll Be Doing Silicon Characterization on ATE * Characterize memory circuits on 300mm wafers using automated probe stations and parametric test equipment across advanced technology nodes * Perform AC/DC electrical measurements to validate timing, power, functionality and reliability on new designs * Perform digital logic testing through Scan/ATPG patterns across temperature, voltage and frequency * Test analog circuits (sense amplifiers, charge pumps, voltage references) across voltage, temperature, and process variations * Develop Python, C/C++, or LabVIEW scripts to automate test equipment, data collection, and analysis * Operate lab equipment: oscilloscopes, curve tracers, parametric analyzers, SMUs, and precision instruments Data Analysis & Design Optimization * Analyze characterization data using statistical tools (JMP, Spotfire, Python) to identify design sensitivities and performance trends * Correlate silicon results with circuit simulations to provide actionable design feedback * Establish performance benchmarks and test limits for new IP designs * Generate technical reports and present findings to development teams Cross-Functional Collaboration & Problem Solving * Work with business units to qualify new memory IP for next-generation SoC integration * Partner with circuit designers and process development teams to root cause performance issues and optimize designs * Collaborate with failure analysis teams to investigate and resolve technical challenges * Support IP qualification for reliability requirements (retention, endurance, cycling) * Provide technical documentation to enable customer design integration * Help transition qualified IP from development to production readiness Minimum Requirements * Master's degree in Electrical Engineering, Computer Engineering, Electrical and Computer Engineering, or related * Cumulative 3.0/4.0 GPA or higher Preferred Qualifications * Strong foundation in analog and digital circuit analysis, transistor-level operation and device physics * Knowledge of analog/mixed-signal circuits (op-amps, comparators, references) * Familiarity with SPICE simulation (Cadence, Synopsys or equivalent) * Understanding of memory architectures (SRAM, DRAM, Flash) and its operation * Understanding of semiconductor physics and fabrication processes * Programming proficiency in Python, C/C++, or equivalent * Data analysis skills - ability to extract insights from large datasets * Familiarity with statistical analysis * Lab experience with oscilloscopes, power supplies, or measurement equipment * Semiconductor characterization experience (coursework, research, internships) * Statistical analysis tools (JMP, Spotfire) or any data visualization tool experience * Analytical problem solver with attention to detail * Strong technical communicator (written and verbal) * Collaborative team player across multiple functions * Self-driven and adaptable to dynamic environments Minimum Requirements * Master's degree in Electrical Engineering, Computer Engineering, Electrical and Computer Engineering, or related * Cumulative 3.0/4.0 GPA or higher Preferred Qualifications * Strong foundation in analog and digital circuit analysis, transistor-level operation and device physics * Knowledge of analog/mixed-signal circuits (op-amps, comparators, references) * Familiarity with SPICE simulation (Cadence, Synopsys or equivalent) * Understanding of memory architectures (SRAM, DRAM, Flash) and its operation * Understanding of semiconductor physics and fabrication processes * Programming proficiency in Python, C/C++, or equivalent * Data analysis skills - ability to extract insights from large datasets * Familiarity with statistical analysis * Lab experience with oscilloscopes, power supplies, or measurement equipment * Semiconductor characterization experience (coursework, research, internships) * Statistical analysis tools (JMP, Spotfire) or any data visualization tool experience * Analytical problem solver with attention to detail * Strong technical communicator (written and verbal) * Collaborative team player across multiple functions * Self-driven and adaptable to dynamic environments

GE Aerospace's US Pay & Time Center of Excellence (COE) is a team of dedicated specialists focused on delivering accurate and timely payroll and time & attendance services for exempt and non-exempt employee populations. The team ensures seamless integration and alignment of payroll and time & attendance processes with broader organizational goals, establishing standard work and governance to leverage best practices and support the successful preparation, processing, and documentation of payroll. The US Senior Pay & Time Manager role is a critical leadership position responsible for overseeing a team of payroll and time & attendance specialists supporting exempt and non-exempt US employee populations across multiple sites and business units. This role drives sets direction and drives strategic initiatives to ensure timely, accurate, and compliant payroll processing, enabling employees to focus on delivering excellence in safety, quality, delivery, and cost (SQDC). As a key partner to site leaders and senior stakeholders, the US Senior Pay & Time Manager fosters strong connections across the organization, ensuring alignment with business priorities while using Flight Deck to implement process improvements, standardization, simplification, and operational efficiency. This role leverages best practices from across GE Aerospace and external benchmarks, guiding leaders and the team in creating innovative solutions to enhance payroll systems and practices. This role requires a forward-thinking approach to payroll operations, combining deep technical expertise with strategic leadership to deliver exceptional service and continuous improvement. This role partners closely with HR Managers, Business Leaders, Digital Technology, and other People Operations teams, acting as a liaison across these functions to drive process improvements, enhance system functionality, and ensure compliance with federal, state, and local regulations. You will influence strategy and priorities across sites and programs, ensuring consistent execution and measurable impact on SQDC. As a US Senior Pay & Time Manager, you will be responsible for leading the compliance, productivity and efficiency of the essential service and process delivery of payroll and time & attendance functions. You will provide strategic direction and insight on continuous improvement solutions to evolve and enhance payroll and time & attendance processes and systems, and you will build leadership capability to sustain results. Additionally you will be responsible for serving as a peer mentor to other team leaders in the NAM organization. **Job Description** **Essential Responsibilities:** + Ensuring pay is processed on time, accurately and in compliance with government regulations. + Leading a high-performing team, developing the team's technical proficiency, making training and development opportunities available and achievable. + Partner with others such as site leaders, vendors, HR Partners, Total Rewards, and People Ops teams on compliant and sustainable design, implementation, and governance of pay practices, resolving complex escalations and risk. + Manage the partnership with Digital Technology and time and attendance application support to provide feedback and direction on the time and attendance system road map & strategy, and partner on implementation and maintenance. + Drive process improvements and implement strategic initiatives. + Resolving complex escalations and risk, explaining complex payroll concepts to a range of employee personas from executives to HR to production employees in a clear and approachable manner. + Implement standard work for pay & time processes & procedures. + Building strong cross-functional relationships and executive stakeholder management; aligning objectives and resources across functions; surfacing risks with mitigation plans. + Analyzing payroll data and metrics to identify trends and opportunities for improvement, leading root cause analysis; translating insights into action plans with measurable outcomes. + Managing over/underpayment processes and partnership with HR and Union Relations / Employee Relations teams to ensure appropriate action. + Provide insight on team strategy and continuous improvement solutions. + Identifying opportunities and pain points, offering solution design options to improve payroll and time & attendance processes. + Providing payroll and time & attendance expertise and leadership during M&A activities. + Translating strategies into action plans and align team priorities to the business. + Obtaining certification in either Workday, Time System or Payroll within one year in role to ensure appropriate level of technical leadership for role. + Serve as a peer mentor to other team leaders in NAM organization. **Qualifications/ Requirements:** + Bachelor's degree in Business Administration, Finance, Human Resources, or a related field from an accredited university with minimum of 5 years of experience in HR Function and/or Payroll/Time & Attendance area, or a high school diploma / GED with at least 9 years of experience in HR Function and/or Payroll/Time & Attendance area. + Expertise in Workday Payroll, time & attendance systems and integration with payroll processes. + Strong knowledge of federal, state, and local payroll regulations, including FLSA, tax compliance and reporting. + Willing to travel as needed up to 15%. **Desired Characteristics:** + Certified Payroll Professional (CPP), Fundamental Payroll Certification (FPC), Workday, or time system certification. + Strong problem-solving skills to address complex payroll challenges. + Excellent executive communication and stakeholder management skills; ability to engage employees, leaders, and external partners. + Willingness to deep dive into current time and attendance site practices and develop strategy and execute resulting in standardization of work across sites. + Serve as a role model continuous improvement behaviors needed to encourage and embed change. + Strong interpersonal and leadership skills. + Strong problem solving and troubleshooting skills; solutions-oriented approach + Experience in managing internal & external audits. + Ability to manage and prioritize multiple urgent deliverables; experience in a matrixed leadership environment. + Experience with managing people virtually or a geographical dispersed team. **Pay and Benefits:** + The base pay range for this position is $117,000 - 160,000. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on November 7th, 2025. + GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

**Change the world. Love your job.** Texas Instruments is looking for motivated interns with a passion for process development, device design and innovation to work with one of several different teams and fabrication sites to enable next generation SiGe technology. This is an exciting opportunity for candidates who enjoy a technical challenge working with equipment, processes, and process integration. This position provides hands on opportunities to work on the development of new high speed SiGe processes and to characterize CMOS, BJT or other silicon devices. Work with and learn from the leading experts in Texas Instruments and help to deliver the best high speed, analog technologies to the world. **Responsibilities may include, but are not limited to** : + Cadence based layout and Parameterized PCELL coding for silicon devices + Design of Experiments (DOE) methods to characterize process or design variables + Wafer level test program development and bench level testing of components + TCAD simulation of silicon devices to improve performance + Data analysis and analytical techniques to quantify impact + Teamwork interacting with a wide variety of teams (Integration, Manufacturing, Reliability, Modelling, etc.) + Basic programing experience to efficiently collect data and streamline analysis + Strong communication and presentation skills to present experiment results **Why TI?** + Engineer your future. We empower our employees to truly own their career and development. Come collaborate with some of the smartest people in the world to shape the future of electronics. + We're different by design. Diverse backgrounds and perspectives are what push innovation forward and what make TI stronger. We value each and every voice, and look forward to hearing yours. Meet the people of TI (*************************************** UI/CandidateExperience/en/sites/CX/pages/4012) + Benefits that benefit you. We offer competitive pay and benefits designed to help you and your family live your best life. Your well-being is important to us. **About Texas Instruments** Texas Instruments Incorporated (Nasdaq: TXN) is a global semiconductor company that designs, manufactures and sells analog and embedded processing chips for markets such as industrial, automotive, personal electronics, communications equipment and enterprise systems. At our core, we have a passion to create a better world by making electronics more affordable through semiconductors. This passion is alive today as each generation of innovation builds upon the last to make our technology more reliable, more affordable and lower power, making it possible for semiconductors to go into electronics everywhere. Learn more at TI.com . Texas Instruments is an equal opportunity employer and supports a diverse, inclusive work environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, disability, genetic information, national origin, gender, gender identity and expression, age, sexual orientation, marital status, veteran status, or any other characteristic protected by federal, state, or local laws. If you are interested in this position, please apply to this requisition. **Minimum Requirements:** + Currently pursuing Master's of Science in Electrical Engineering, Material Science, Electrical and Computer Engineering, Computer Engineering, Physics or related field + Minimum Cumulative 3.0/4.0 GPA **Preferred Qualifications:** + Understanding of the fundamental theory of operation of silicon CMOS and BJT devices + Knowledge of fabrication process steps (e.g. diffusion, implantation, oxidation) + Demonstrated strong analytical and problem-solving skills + Strong verbal and written communication skills + Ability to work in teams and collaborate effectively with people in different functions + Strong time management skills that enable on-time project delivery + Demonstrated ability to build strong, influential relationships + Ability to work effectively in a fast-paced and rapidly changing environment + Ability to take the initiative and drive for results **ECL/GTC Required:** Yes

**Change the world. Love your job.** As an Information Technology Intern you will work within the Information Technology Solutions organziation to support providing the infrastructure that will drive business growth, agility, innovation, process excellence, customer experience& global reach for TI. IT Solutions is strategically positioned to be the engine for TI's growth. The organization supports TI's applications and technology infrastructure for the company's critical design, sales, manufacturing, finance, operations and security functions. When you join the IT Service organization, you will broaden your perspective and learn the IT organizations and cultures, and build a strong network and develop cross functional skills. You will gain exposure to the variety of IT roles by having meaningful assignments from the start, because nothing beats real-world experience. **Business analyst:** + Perform functions on projects such as scope and requirement documentation, test case development, and user acceptance testing + Support the businesses' day-to-day activities and system usage / entitlement + Act as a liaison between the businesses and IT + Understand business processes and partnering on system and process changes **Application developer:** + Support the design, construction and implementation phases of a system and or upgrade project + Apply skills to help solve problems for various business partners: + Equipment automation and overall factory management, + IC and software design engineers, and + Finance and Operations / Marketing / Supply Chain + Use web development, programming (C, C++, JAVA, PERL, HTML, SQL) and scripting skills in Unix or Windows environment and potentially using Oracle or similar database system in the backend. **Systems admin / Security admin / Network specialist / Mainframe specialist:** + Administer client/server databases (e.g., Oracle, Microsoft) or support Enterprise UNIX environments (patch / version management) + Develop and execute security controls, defenses and countermeasures to intercept and prevent internal or external attacks or attempts to infiltrate company email, data, e-commerce and web-based systems. + Manage and maintain a large install base of computers running various operating system (ie. Unix, Oracle, SAP, Windows). + Plan, design and implement local and wide-area network solutions between multiple platforms and protocols (including IP and VOIP) + Mainframe system and application provisioning/support using JCL, TSO, ISPF and Assembly/COBOL programming languages Put your talent to work with Texas Instruments ! Texas Instruments will not sponsor job applicants for visas or work authorization for this position. **Why TI?** + Engineer your future. We empower our employees to truly own their career and development. Come collaborate with some of the smartest people in the world to shape the future of electronics. + We're different by design. Diverse backgrounds and perspectives are what push innovation forward and what make TI stronger. We value each and every voice, and look forward to hearing yours. Meet the people of TI (*************************************** UI/CandidateExperience/en/sites/CX/pages/4012) + Benefits that benefit you. We offer competitive pay and benefits designed to help you and your family live your best life. Your well-being is important to us. **About Texas Instruments** Texas Instruments Incorporated (Nasdaq: TXN) is a global semiconductor company that designs, manufactures and sells analog and embedded processing chips for markets such as industrial, automotive, personal electronics, communications equipment and enterprise systems. At our core, we have a passion to create a better world by making electronics more affordable through semiconductors. This passion is alive today as each generation of innovation builds upon the last to make our technology more reliable, more affordable and lower power, making it possible for semiconductors to go into electronics everywhere. Learn more at TI.com . Texas Instruments is an equal opportunity employer and supports a diverse, inclusive work environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, disability, genetic information, national origin, gender, gender identity and expression, age, sexual orientation, marital status, veteran status, or any other characteristic protected by federal, state, or local laws. If you are interested in this position, please apply to this requisition. **Minimum Requirements:** + Currently pursuing a bachelors degree in Computer Science, Information Technology, Information Systems or a related field + Cumulative 3.0/4.0 GPA or higher + Basic understanding of web development, programming (C, C++, Java, Perl, Python, R, SQL) and scripting + Basic understanding of Networks, Operating systems (Windows, Unix) and Databases **Preferred qualifications:** + Ability to establish strong relationships with key stakeholders critical to success, both internally and externally + Strong verbal and written communication skills + Ability to quickly ramp on new systems and processes + Demonstrated strong interpersonal, analytical and problem-solving skills + Ability to work in teams and collaborate effectively with people in different functions + Ability to take the initiative and drive for results + Strong time management skills that enable on-time project delivery **ECL/GTC Required:** Yes

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

**Change the world. Love your job.** In your first year with TI, you will participate in the Career Accelerator Program (CAP), which provides professional and technical training and resources to accelerate your ramp into TI and set you up for long-term career success. Within this program, we also offer function-specific technical training and on-the-job learning opportunities that will encourage you to solve problems through a variety of hands-on, meaningful experiences from your very first day on the job. At TI, Systems Marketing Engineers focus deeply on understanding the technical needs of our customer, and future trends of an industry or end equipment, then create systems level solutions. Systems Marketing Engineers drive technical collaboration with customer, product lines, and TI sales force to drive innovative whole system solutions across key end equipments. In this system marketing engineer role, you'll have the chance to: + Work with customers to provide innovative solutions to their most challenging problems + Utilizing TI's broad portfolio to combine TI parts to create whole system level solutions to accelerate customer product life cycle + Combine Hardware and software capabilities to further integrate complete TI solutions + Reference design Development including: block diagram, schematic capture, PCB layout, fabrication and assembly, testing. + Interface directly with TI business units and customers to influence product roadmaps + Gather user requirements, translate them to functional specifications, and implement solutions and enhancements to broader end equipments. + Provide complete documentation for system level solution + Perform troubleshooting and debugging on issues related to the system working directly with customers As a Systems Marketing Engineer, you will also get exposure to other roles such as: Applications Engineering, Product Marketing Engineering, Systems Engineering, and Sales through formal learning, projects and on-the-job development experiences that will help you broaden your knowledge and accelerate your growth and success at TI. Put your talent to work with us as a systems marketing engineer- change the world, love your job! Texas Instruments will not sponsor job applicants for visas or work authorization for this position. **Why TI?** + Engineer your future. We empower our employees to truly own their career and development. Come collaborate with some of the smartest people in the world to shape the future of electronics. + We're different by design. Diverse backgrounds and perspectives are what push innovation forward and what make TI stronger. We value each and every voice, and look forward to hearing yours. Meet the people of TI (*************************************** UI/CandidateExperience/en/sites/CX/pages/4012) + Benefits that benefit you. We offer competitive pay and benefits designed to help you and your family live your best life. Your well-being is important to us. **About Texas Instruments** Texas Instruments Incorporated (Nasdaq: TXN) is a global semiconductor company that designs, manufactures and sells analog and embedded processing chips for markets such as industrial, automotive, personal electronics, communications equipment and enterprise systems. At our core, we have a passion to create a better world by making electronics more affordable through semiconductors. This passion is alive today as each generation of innovation builds upon the last to make our technology more reliable, more affordable and lower power, making it possible for semiconductors to go into electronics everywhere. Learn more at TI.com . Texas Instruments is an equal opportunity employer and supports a diverse, inclusive work environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, disability, genetic information, national origin, gender, gender identity and expression, age, sexual orientation, marital status, veteran status, or any other characteristic protected by federal, state, or local laws. If you are interested in this position, please apply to this requisition. **Minimum requirements:** + Minimum BS degree in Electrical Engineering, Computer Engineering, Electrical and Computer Engineering or related field + Minimum Cumulative 3.0/4.0 GPA **Preferred qualifications** + Understanding of and experience with system design, including writing IC design specifications, developing algorithms and creating system reference models + Knowledge in structured and/or object oriented programming (C, C++) and signal processing tools (Matlab) + Analysis of common electrical circuits + Ability to establish strong relationships with key stakeholders critical to success, both internally and externally + Strong verbal and written communication skills including ability to present solutions to key stakeholders and customers. + Ability to quickly ramp on new systems and processes + Demonstrated strong interpersonal, analytical and problem-solving skills + Ability to work in teams and collaborate effectively with people in different functions + Ability to take the initiative and drive for results + Strong time management skills that enable on-time project delivery + Familiar with schematic capture simulation tools + Ability to use data and calculations to select best fitting parts + Ability to break down and analyze complex systems **ECL/GTC Required:** No

Enjoy a rewarding career with Lockheed Martin Aeronautics Field Sustainment (AFS) supporting operations in a very active and high operational tempo as the Site Lead and F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE) for the United Arab Emirates (UAE) Air Force at Al Dhafrah Air Base (AB), UAE. Our team is responsible to Global Aerospace Logistics (GAL) for supporting the United Arab Emirates Air Force by providing on-site advice, liaison, and training in the installation, operation and maintenance of equipment and systems related to F-16 avionics on and off the aircraft. What You Will Be Doing · Be the single-point of contact to oversee all on-site F-16 contractor support operations at Al Dhafra AB, UAE and will be the primary customer liaison to the customer in the field. · Have overall responsibility for on-site contractor technical services, contractor logistics support (CLS) maintenance and Field Support Engineers (FSE). · Communicate priorities and needs to key Program Management personnel. · Manage project / support resources in compliance with cost goals and operating budgets and maintain a sustained growth of technical and professional competence of the on-site support team. · Be responsive to the operational and support concerns of the local customer and ensure responsive support is provided. · Coordinate and supports industry visits and deployed Contractor Field Team (CFT) to the site. · Have management tasks that include, but are not limited to, oversight of all on-site contractor activities, planning and scheduling of on-site teamwork assignments (including potential contractor deployment packages), enforcement of safety and physical security procedures and directives, and management of labor charges and administrative documentation. · Ensure personnel compliance with program, company, and government agency policies and procedures and coordinate staffing and training requirements. · Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating techniques pertaining to the adjustment, calibration, trouble-shooting, bench check, routine maintenance, inspection and repair of the prime equipment/system. · Devise local informal training programs and provide advice in identifying needed training programs. · Render technical advice to resolve difficult and unusual maintenance problems. · Provide liaison through which information related to maintenance and operational problems can be quickly disseminated to operations and maintenance personnel. · Provide training on the use and interpretation of applicable technical orders. Provide advice as requested to assist in accident investigation and preparing failure data reports and unsatisfactory reports. · Be willing to work any shift, and weekends. Some travel may be required. · Pass an overseas physical examination. Who You Are 1. You thrive in cross-functional environments, actively engaging with colleagues from various departments to foster collaboration and achieve shared goals. 2. You possess the ability to build strong relationships across departments, facilitating open dialogue and encouraging cooperation among diverse teams. What's In It For You: From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin's comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus -if you have the passion and courage to dream big, work hard, and have fun doing what you love then we want to build a better tomorrow with you. oconusreq aeroafs aerosystems #OneLMHotJobs Basic Qualifications The following Basic Qualifications are skills that a candidate must possess to be considered for this position: · Demonstrated strong team and strategic leadership skills · Demonstrated experience to communicating effectively across multiple levels of the business and across a variety of functions · Demonstrated experience to coach teams, resulting in overall team growth and performance improvements · Demonstrated experience managing aircraft, product / system engineering support. - Aircraft avionics experience must include at least 3 years with F-16 Systems and Subsystems. - Experience with Microsoft Office Suite - Word, PowerPoint, Excel. - Must be a United States citizen and must possess an active Secret Security Clearance. Desired skills The following Desired Skills are not required but are those skills that would set a candidate apart from the other candidates: - Foreign Military Sales (FMS) customer fighter training operations support. - At least 10 years of aircraft maintenance, Operations, or Supply professional experience. - Familiar with all Blocks F-16 - Experience working and interacting with senior management within unit, operations, and maintenance communities. - Knowledge of F-16 pilot and maintainer systems & processes, and/or logistics support. - Have a valid US Passport. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. * At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Other Important Information By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to work remotely Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedule Information Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Security Clearance Information This position requires a government security clearance, you must be a US Citizen for consideration. Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $117,200 - $206,770. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year. This position is incentive plan eligible. Pay Rate: The annual base salary range for this position in most major metropolitan areas in California, Massachusetts, and New York is $134,900 - $233,680. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. This position is incentive plan eligible.

**Change the world. Love your job.** We're looking for a sharp, curious, and ambitious Internal Auditor to join our Controls/ICFR team. Our team collaborates with our business partners, tackles meaningful work that shapes how the business operates and safeguards its future. You'll have the autonomy to own your control areas from start to finish, uncover insights that others miss, and deliver recommendations that leadership truly acts on. Leverage your audit expertise in a role where your work will be valued, visible and influential. **What You'll Do** + **Drive the control environment** - Perform detailed internal control over financial reporting (ICFR) audits, Internal Control Checklist (ICC) and help educate on controls + **Think like an investigator** -spot discrepancies and control weaknesses that others overlook, and turn them into actionable insights. + **Build audit plans to strengthen the control environment** - develop and execute systematic audit plans focusing on financial control processes + **Present findings with confidence** - engaging senior leaders in discussions that drive improvements. + **Own your projects** -independently run large or complex audits, balancing multiple priorities without sacrificing quality. + **Collaborate with external auditors** -serving as a trusted partner to answer questions, discuss risk and discuss control solutions + **Set the bar high** -consistently deliver results ahead of schedule and elevate the standards of the audit function. **Why TI?** + Engineer your future. We empower our employees to truly own their career and development. Come collaborate with some of the smartest people in the world to shape the future of electronics. + We're different by design. Diverse backgrounds and perspectives are what push innovation forward and what make TI stronger. We value each and every voice, and look forward to hearing yours. Meet the people of TI (*************************************** UI/CandidateExperience/en/sites/CX/pages/4012) + Benefits that benefit you. We offer competitive pay and benefits designed to help you and your family live your best life. Your well-being is important to us. **About Texas Instruments** Texas Instruments Incorporated (Nasdaq: TXN) is a global semiconductor company that designs, manufactures and sells analog and embedded processing chips for markets such as industrial, automotive, personal electronics, communications equipment and enterprise systems. At our core, we have a passion to create a better world by making electronics more affordable through semiconductors. This passion is alive today as each generation of innovation builds upon the last to make our technology more reliable, more affordable and lower power, making it possible for semiconductors to go into electronics everywhere. Learn more at TI.com . Texas Instruments is an equal opportunity employer and supports a diverse, inclusive work environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, disability, genetic information, national origin, gender, gender identity and expression, age, sexual orientation, marital status, veteran status, or any other characteristic protected by federal, state, or local laws. If you are interested in this position, please apply to this requisition. **Minimum requirements** + Bachelor's degree in Accounting, Business Administration, Finance or related field + 3+ years of relevant work experience, Internal Audit or Big Four accounting firm experience highly preferred + Certification as CPA or CIA + Proven ability to conduct complex audits with minimal oversight + Working knowledge of U.S. GAAP and compliance with internal controls and Sarbanes-Oxley/SOX **Preferred qualifications** + Sharp analytical skills, with the ability to use statistical tools and data analysis to uncover insights. + Proficiency with technology including MS Office applications; experience with analytics tools such as Power BI, Alteryx, Qlikview or Tableau + Willingness to travel + Exceptional communication, both written and verbal, and presentations to senior leadership. + Strong program management skills + A self-starter mindset, with the discipline to juggle multiple priorities without compromising results. **Base Range Info:** Base pay is one part of our total compensation package and is determined within a range. This provides the opportunity to progress as you grow and develop within a role. Your base pay will depend on your skills, qualifications, experience, and location. The base pay range for this role is shown below. **Base Range:** $73,500 - $110,500 per year **ECL/GTC Required:** Yes