Apprentice jobs in Columbus, GA

Job Title: Distribution Apprentice A Crew Foreman Job Classification: Full Time / Non-Exempt Company: Electra Grid Solutions electragridsolutions.com The Distribution Apprentice A is responsible for assisting experienced linemen in the installation, maintenance, and repair of overhead and underground power distribution systems. This is the first step in a multi-level apprenticeship designed to develop knowledge, skills, and safe work practices under the supervision of experienced Journeymen. The role provides hands-on learning and practical training in the utility field. Job Duties and Responsibilities * Work safely on the construction, maintenance, and repair of energized and de-energized power lines * Assist in setting poles and anchors by safety and technical specifications * Maintain company vehicles, tools, and equipment in clean, working condition * Learn to identify and work with distribution voltages and understand induced voltage * Learn to read blueprints and assist in identifying structural or equipment issues * Work productively from aerial devices and at heights under supervision * Assist in assembling and erecting poles of varying heights and configurations * Participate in framing and setting pole structures, including work on de-energized poles * Assist in installing various line hardware and compression connections * Learn and follow correct procedures for PPE use and inspection of rubber goods and cover-up * Climb wood and steel poles/structures safely with proper tools and technique * Understand and perform basic knot-tying and the use of hand lines * Learn proper grounding procedures and minimum approach distances * Understand material types and equipment setup principles used in line work * Function effectively within a crew and demonstrate willingness to learn from others * Practice flagging and tagging procedures as instructed Job Requirements * High School Diploma or GED required * Valid Class A CDL required to be maintained while in position (or ability to obtain within 90 days) * Must pass drug, alcohol, background, MVR, and clearinghouse checks upon hire and continuously while in position * Must pass a DOT physical examination * A basic understanding of electrical distribution systemsis preferred * First Aid and CPR certification preferred (or ability to obtain) * Must be safety-conscious and willing to follow all company safety protocols * Able and willing to travel long distances on short notice * Able and willing to work extended hours, including overtime and weekends * Able and willing to work in all types of weather, including inclement conditions * Demonstrates strong work ethic, attention to detail, and eagerness to learn * Effective communication and team collaboration skills * Professionalism, integrity, and willingness to take initiative Physical Requirements * Must be able to lift and carry up to 50 pounds frequently * Ability to bend, climb, kneel, stoop, and stand for extended periods * Must be able to climb poles, ladders, and steel structures using proper equipment * Must be able to work at heights and in confined spaces * Frequent repetitive use of hands, wrists, and fingers for handling tools and materials * Visual acuity is required for identifying materials, reading instruments, and performing work with precision * Must be able to wear and operate personal protective equipment (PPE) for long periods * Capable of working outdoors year-round in all weather conditions * Able to perform physically demanding labor for extended hours, often under stressful or hazardous conditions Working Conditions * Work performed outdoors in all types of weather conditions * Exposure to electrical hazards, construction environments, and elevated work platforms * Travel required to various job sites, including occasional overnight stays * Extended work hours, including early mornings, late evenings, and weekend shifts as needed Key Attributes * Self-Motivated - Takes initiative and responsibility for safety and quality. * Team-Oriented - Works cooperatively with others in a crew setting. * Customer-Focused - Acts with professionalism and respect. * Safety-Minded - Adheres to safety protocols and uses PPE properly. Additional Notes This job description is not intended to be all-inclusive. Employees may be required to perform other duties as necessary to meet the ongoing operational needs of Electra Grid Solutions. Join Our Team Electra Grid Solutions is committed to safety, excellence, and empowering energy infrastructure. If you're a hardworking individual who thrives in outdoor environments and values teamwork, we encourage you to apply today. electragridsolutions.com

Job DescriptionRate of Pay: $17.88 - $20.39 Status: Open Until Filled This is an entry level position that requires the ability to execute both unskilled and semi-skilled work while providing support regarding the installation and maintenance of all traffic signals, school flashers, fiber optic network, traffic signs, pavement, and curb markings used by the city. Aids in the installation of traffic signals and controllers at new intersections, including all internal and external wiring. Cuts pavement and installs signal loops, installs guy wires and lashing cable on overhead lines, digs holes for steel support poles, pours concrete, builds rebar cages for poles, and sets forms and poles. Provides support in maintaining after-hours call rotation with Traffic Signal Technician. Capable of providing support with troubleshooting, malfunctioning traffic control devices and completing necessary repairs or replacement in a limited capacity. Gives aid in the installation and maintenance existing fiber-optic network as well as any new additions to the City of Marietta Traffic Network. Responsible for the maintenance and storage of all tools and equipment used in performing maintenance and repairs (aerial equipment, pavement saws, generators, meters, etc.). Assists in making and installing signs and painting road markings. Assists with completing signal and cabinet maintenance. Provides assistance with completing sign maintenance and reflectivity testing. Capable and willing to provide assistance, under the direction of assigned technician, with maintaining accurate reports and documentation in regard to construction maintenance and repair work performed. Capable to provide limited support as a first responder regarding trouble calls associated with signs and signals. Provides assistance with the maintenance of the signs and signals shop area. May be required to perform duties in other divisions within the department in certain circumstances, including, but not limited to periods of heavy workload, natural disasters, and city events. These duties should not require specialized training or certification and will most likely involve manual labor tasks. Perform other related duties as required. Preferred Qualifications: High school diploma or GED and a minimum of two years' experience in outside electrical construction. A minimum of two years' experience in heavy manual outside labor required, preferably in the construction field. Experience and skill in both reading and working from blue-prints-plans and producing layout work from prints. Experience in general methods, materials and equipment used in production of street signs and other types of signage production. Ability to acquire and implement sign installation methods. Ability to report to work in a punctual and reliable fashion. Must possess a current I.M.S.A Work Zone Safety certification at time of hire or obtain within 1 year of hire date. Must possess a current flagging/ traffic control certification at time of hire or obtain a GDOT flagging certificate within one year from date of hire. Ability to carry out instructions and perform heavy repetitive manual tasks. Working knowledge of the Manual of Uniform Traffic Control Devices. Ability to function in a team environment. Skill and ability to safely operate required electronic and mechanical tools and equipment. Documented training or experience in the operation and manipulation of a bucket truck or aerial equipment. Skills testing in this area will be performed prior to an offer being made. Must be in good physical condition with the ability to perform heavy manual work outside in all types of weather conditions. Must pass a drug screen and physical exam at time of hire. Ability to pass assessment testing at the end of the working test period with a score of 90 percent or above. Must have a valid Georgia Driver's License at time of hire and a satisfactory seven-year driving history, to include no DUI's in the last five years. Disclaimer Successful candidates are required to submit to drug screen & background inquiry. Powered by JazzHR t3XP52g84f

Jeni's Splendid Ice Creams is searching for a Shopkeeper Apprentice to join our team in Atlanta! At Jeni's, we're devoted to making better ice creams and bringing people together. Our scoop shops are at the heart of how we serve this mission. They are where we offer the ice creams we work so hard to build from the ground up-where people come together to share joy and conversation. We love people. We love ice cream. We view ice cream as a form of art. Shopkeeper Apprentices are full-time employees sharing the same responsibilities as the Shopkeeper including accounting, scheduling, inventory/ordering, and all HR functions (hiring, training, development, and performance management of all team members). This full-time position also involves working variable shifts, including opening shifts, closing shifts, and/or weekend shifts. Shopkeeper Apprentices report directly into a Shopkeeper and can act as the second-in-command at a full shop or as first-in-command at a low volume/complexity location. Shopkeeper Apprentices undergo ongoing training and development from their Shopkeeper throughout their time in the position to best prepare them to support the shops in their market as well as for success in a future Shopkeeper position. Qualities of a Shopkeeper Apprentice: Passionate about customer service and inspires passion in their team Strong work ethic, good heart, and team-first mentality Exceptional organizational and time management skills with the ability to prioritize and achieve competing deadlines Creative, resourceful, and proactive problem solver Energetic, positive, and skillful communicator Eagerness to adapt and grow as a leader Committed to the well-being of their shop team, their community, and the environment around them Benefits of a Shopkeeper Apprentice: Competitive salary Monthly bonus potential for shop performance Excellent insurance (health, dental, vision, dental) Paid time off, including sick, vacation, and holiday pay 4% match on 401k contributions after 3 months of employment A one-month paid sabbatical after 3 years of continuous service Annual paid day to volunteer for a non-profit organization that matters to you 50% discount at Jeni's Scoop Shops and online Career development toward Shopkeeper and beyond About Jeni's Splendid Ice Creams: Founded by Jeni Britton in 2002, Jeni's Splendid Ice Creams is a B Corp headquartered in Columbus, Ohio, with scoop shops in over twenty cities across the country, making it possible for members of Team Jeni's who are interested in developing their careers, or transitioning to a new city, to have meaningful opportunities to learn, grow, and explore. Our Shopkeeper Apprentices make a difference in their shop, their community, and in how they lead their team and serve their customers. If this opportunity sounds delicious to you, please apply. Jeni's is an equal opportunity employer. Said our way, we love and honor differences, and we love sharing common values such as talent, hustle, guts, resilience, and empathy. Our differences are a primary source of our team's strength and we crave having a team rich with diversity which is creativity and art in its human form.

Job Summary: The Apprentice is responsible for Operating and maintaining heavy construction equipment such as cranes, backhoes, bulldozers, excavators, front-end loaders, forklifts, concrete pumps etc. Operating Engineers represents operators, mechanics, oilers, fuel trucks drivers, lowboy drivers, riggers, signal persons and a variety of other skilled trades. This is a three year nationally recognized training program. It is registered with the Florida Dept. of Education. Essential Functions: Operating and maintaining heavy construction equipment such as cranes, backhoes, bulldozers, excavators, front-end loaders, forklifts, concrete pumps etc. Operate specialty machinery to fabricate, manufacture, assemble, or move products. Maintain and monitor machine to make sure it functions properly. Understanding of how operated machine works. Conduct quality checks periodically. Minimum Requirements: High School Diploma or equivalent. Valid Commercial Driver's License, Class A. Must be legally authorized to work in the United States. Must be able to read, write, speak, and understand English. Physical Requirements: Sims Crane & Equipment maintains a firm commitment to providing a safe and healthy work environment for its employees and quality services to its clients. Sims Crane & Equipment is a drug-free workplace. Must be able to pass a post-offer / pre-placement drug screen. Must also submit to a post-offer / pre-employment background report & motor vehicle check. Work is performed in a standard construction environment with prolonged periods of standing, sitting and/or walking. Subject to standing, walking, bending, reaching, stooping, and lifting objects up to 100 pounds at times. May occasionally be exposed to dangerous machinery, extreme noise and physical harm in areas requiring hard hats, safety glasses and steel-toed safety shoes. Ability to pass DOT pre-placement physical and physical capacities exam. Disclaimer: An employee must be able to perform the essential functions of the job, with or without reasonable accommodation. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Sims Crane & Equipment is proud to be an Equal Opportunity Employer/Drug and Alcohol-Free Workplace. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status, such as race, religion, color, national origin, sex, sexual orientation, gender identity and age.

The Dock and Door Apprentice will work out of our Atlanta Branch. They will work with the senior technician on a daily basis to aid with planned maintenance service on Loading Docks and learn other repairs. They will also receive training from the training staff. Job Description The Dock and Door Apprentice will work in the field with senior technicians assisting at various customer locations. The Apprentice will be assigned various tasks related to equipment maintenance. They will also receive on the job training from senior technicians as well as the Dock and Door Trainer. Provide our customers with professional installation and repair of all types of Loading Dock Equipment and Accessories. Ensure that our customers are safe and in compliance with ANSI Regulations as they relate to safety at the Loading Dock. Requirements Skills\/Responsibilities Able to operate scissor lift or forklifts (we will train and certify) Be knowledgeable of all OSHA\/ANSI regulations as they pertain to loading dock equipment Be able to fill out and complete work orders. Paperwork and documentation must be neat, clean, legible and organized. Must be able to lift up to 100 lbs. (and occasionally in excess of 100 lbs.) Must have excellent driving record Upkeep and safe operation of service vehicle Effectively communicate with customers, co\-workers and management Work Experience Requirements Entry level, company will provide training Education\/Certification\/License Requirements High School Diploma\/GED "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"682167578","FontFamily":"Arial, Helvetica, sans\-serif","job OtherDetails":[{"field Label":"Department Name","uitype":4,"value":"Toyota Material Handling Systems"},{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"City","uitype":1,"value":"Atlanta"},{"field Label":"State\/Province","uitype":1,"value":"Georgia"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"30319"}],"header Name":"Dock and Door Apprentice","widget Id":"**********00072311","is JobBoard":"false","user Id":"**********00235003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":true,"job Id":"**********09753031","FontSize":"15","location":"Atlanta","embedsource":"CareerSite","logo Id":"hs654aa3cf36a6b354ae38f8148a2cfbb79b2"}

Elevated is the fastest growing independent elevator services provider in the nation. We bring together the industry's finest technicians to serve our customers in 58 markets across 22 states. Each office within Elevated has local operations and staff dedicated to providing a superior standard of service, and now benefits also from a world-class corporate infrastructure, state-of-the-art facilities, and superior training and support for our workforce. Job Summary Assist in complete modernizations and repairs for hydraulic and traction elevators that include installing microprocessor controllers, door equipment, pumping units, hoist machines, wiring and connections, fixtures, hoist ropes, packings, etc. Responsibilities and Duties * Successfully complete modernizations and repairs in a professional and profitable manner. * Conducts repair. Modernizations and inspections of elevators, and related devices to ensure their effective and efficient operation and conformance to safety regulations and OSHA requirements. * Performs annual tests to ensure the proper operation of safety devices during final inspections * Assists in determining the suitability of present elevator equipment, proposed modifications and new equipment. * Perform other related duties incidental to the work described herein. This is not intended to be an exhaustive list of all responsibilities and duties required. Education and Knowledge: * High School Diploma or equivalent * Certified Elevator Technician degree or Elevator Mechanic License, preferred * Knowledge and skill in the use of hand and electrical tools such as grinders, drill motors and coring machines. * Knowledge and skill in the use of electrical reading and testing equipment, hoisting and rigging equipment, chain tackles, etc. Environmental Demands: Physical Requirements- must be able to climb, crawl, stoop, climb ladders, and walk beams. Must be able to lift and carry tools and materials weighing in excess of 50 pounds and be able to raise and carry with assistance items weighing 200 pounds. Must be able to work from high ladders and scaffolding. Must be able to work safely in close proximity to moving and working equipment. Must be available to work on an on-call basis in cases of emergency. Work Environment- may work in dusty and dirty places such as elevator shafts, and pits or other mechanical spaces where temperatures may exceed 100 and equipment may be oily and greasy. Benefits and Perks * Free Health Insurance for single coverage * 401(k) match towards your retirement account * Top Pay in the industry * Advancement Opportunities through our CET training program Elevated is an Equal Opportunity Employer. We value diversity and encourage applicants of all backgrounds regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.

Job Details AL Mobile - Saraland, ALDescription The Off Premise Sales Apprentice role is an entry-level position into our sales organization that allows an associate to prepare for a Sales Representative role at United. The position involves running vacation routes for Sales Representatives, performing sales deliveries to accounts, merchandising and building displays in accounts, managing and rotating inventory in accounts, and building relationships with both accounts and various departments of United. This position is perfect for a self-motivated, competitive individual who thrives in situations requiring a high level of collaboration, organization, interpersonal skills, and creativity. Qualifications Must be 21 years or older High school or vocational school diploma or GED equivalent required 1-3 years of sales experience preferred Valid driver's license for applicable state Valid auto liability insurance for applicable state Ability to secure and maintain a State Alcohol Sales Permit in accordance with state laws Responsibilities: Work with sales team members to train and understand all facets of the United sales representative role Drive to all call points Perform sales deliveries to accounts Run vacation routes for sales representatives Sell new products or programs Utilize Encompass to bill orders Build displays in accounts Merchandise accounts using point of sale material Work back stock, shelf space, and cold boxes in accounts to ensure product rotation Build and maintain strong relationships with account management Build and maintain strong relationships within United with delivery associates, sales representatives, and sales management to work as a team Perform other duties as assigned Competencies: Decision Making Plan and Organize Customer Focus Professionalism Flexibility Communication Relationship building Time management Positive attitude Stress management Conflict resolution Critical Skills: Time management Selling skills Quality Control Product Knowledge Proficient in use of Microsoft Office and other technology Able to read, write, and perform business math computations Working Conditions: Able to maintain very high proficiency and job standards while working in a non-temperature controlled environment that includes exposure to heat, high humidity, and inclement weather Able to work occasionally in refrigerated areas Able to work in an environment with moderate noise levels Physical Requirements and Essential Functions: Regular, reliable attendance required Able to drive and safely operate a vehicle Able to frequently use hand trucks, stairs, ramps, and docks Able to talk and hear, stand and walk, sit, reach with arms and hands, lift and carry, and use hands and fingers to handle or feel Able to perform greater than average lifting up to 50-65 lbs, with some overhead lifting required Able to frequently climb or balance, stoop, kneel or crouch Able to learn and maintain knowledge of company and products Must have specific vision abilities that include close vision, distance vision, and the ability to judge distance

Founded in 1956, the Jacuzzi Brand has grown to become the modern-day Jacuzzi Group, the premier manufacturer of functional products for the home and outdoor space found in more than 60 countries. Jacuzzi Bath Remodel is the fastest growing business unit of Jacuzzi Group with 10 successful locations launched nationwide in under 4-years. Jacuzzi Bath Remodel combines our premium materials, knowledgeable sales team, experienced in-house certified installers and over 60 years of proven excellence to deliver the highest standard of customer satisfaction. Jacuzzi Bath Remodel is hiring Construction - Apprentice Installers. If you are looking for a career in Construction or Installation, please apply now! What we offer our Construction - Apprentice Installers: We provide trucks and tools! 40-hour work week with plenty of overtime (paid at 1.5x). Typical schedule is Monday- Friday + overtime. Hourly pay rate of $19.00/hr. A clear path to advancement and career development, become a Lead Installer in under a year! Requirements of a Construction - Apprentice Installer: 1+ years of experience in general construction. Basic knowledge of tools and construction practices. Some experience with carpentry, demolition, framing, drywall installation or repair, tile work, remodeling, or plumbing. Must be proficient with using a tape measure. Comfortable lifting 50+ lbs. consistently. Ability to interact professionally with customers. For insurance purposes Apprentice Installers must be able to pass a DMV check. What we are looking for in our next Construction - Apprentice Installer: Punctual Hard worker Willingness to learn and grow within the company. Desire to be with a great company long term. Providing a great customer experience Benefits for our Construction- Apprentice Installer: Medical, dental, vision, life insurance plans Paid vacation and holidays Paid Training 401(k) with matching program Advancement Opportunities

All American Glass, Pooler, GA is looking for individuals to join our growing team! We have openings for entry level helpers, with opportunity to learn and develop top skills. We offer excellent benefits, a positive culture, and continuous growth opportunities. Key Responsibilities: -Follow and promote safe work practices -Fabrication of storefront and curtain walls -Assist Glaziers as directed -Assist with control and organization of project materials -Maintain clean and organized shop and yard Key Duties: -Assist with fabricating storefront and curtain wall -Assist with installing storefront, curtain wall, doors, hardware and glass -Fabricate and install break metal -Caulking -Other duties as assigned

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. REPORTS TO: Supervisor and Instructor SUPERVISES: None AUTHORITIES / RESPONSIBILITIES: Fulfill responsibilities as stated in the DOL Apprenticeship Program and become a skilled Journey person within 2 years and a First Class Trades person within 4 years of training. Work progressively towards completing 4 years of training; including 8000 hrs on the job learning & a minimum of 576 hrs class room instruction Maintain a minimum 65% passing rate Commit to learning all aspects of Fitout trades: Interior Fitout- fabrication of furniture, components, modules, & installation of furniture Exterior Fitout- install external doors & hatches SFP- install insulation & smoke barriers HVAC- install HVAC duct & equipment Practice safe working habits when using power tools and machinery Miscellaneous tasks as directed by supervisor or instructor Additional Qualifications/Responsibilities QUALIFICATIONS / KNOWLEDGE / EXPERIENCE: Must be at least 18 years of age Must pass Work Keys Test within the first 6 months of employment Ability to read and understand drawings and blue prints Knowledge of basic mathematical skills Working knowledge of power tools and machinery Physical Requirements: Standing: 25% Sitting: 15% Walking about: 60% Lift and Carry: 50lbs. for 10% of the day Hazards: Climbing ladders, accessing confined spaces Working Conditions: General shipbuilding environment, loud, dusty, hot/cold TOOLS: Familiar with use and function of necessary tools for job duties DIRECTION EXERCISED: None DISCRETION EXERCISED: None LIASES WITH: Other trades, instructors, and apprentices ADDITIONAL GUIDELINES: Candidates must meet the following employment eligibility guidelines to be considered for employment with Austal USA: 18 years of age or older at time of application Able to provide proof of US Person Status No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date No felony convictions of Drug crimes within three years from disposition date Willing to submit to a drug screen Willing to submit to a background check

SUMMARY OF ROLESupports operations by preparing products for painting, painting products according to specifications, with limited waste and materials, and cleaning work sites. Perform designated steps in work processes in a safe manner wearing required personal protective equipment while maintaining required quality and production standards and records. Successfully operates equipment, handheld tools. ESSENTIAL DUTIES & RESPONSIBILITIES include but are not limited to:· Maintain adequate paint inventory to meet current and future production requirements.· Be a designated helper to ensure product is properly prepared for painting.· Locates and verifies products for painting. Inspect products and verify reels are properly prepared before painting.· Correctly and safely mix paint according to specifications. Keep area clean and safe.· Paint products according to required specifications and prints with minimal paint waste and efficient use of paint and supplies.· Maintains clean and safe work site by sweeping and disposing of hazardous materials, following OSHA and MSDS safety standards. Properly wearing personal protective equipment which includes the required full-face respirator and coveralls.· Returns necessary items to storage and maintains paint waste records according to EPA standards. · Completes daily production records and hourly records product performance on designated board.· Complete annual safety medical evaluation for proper full-face respirator fit. Keep respirator clean and stored properly according to safety standards. · Receives direction from Lead person, Production Manager & Office Manager.· Maintains work records by entering daily production and quality sheets.· Updates job knowledge by participating in training. KNOWLEDGE, SKILLS & ABILITIES· Must be able to lift and carry heavy objects using proper lifting and handling techniques. Use various material handling equipment.· Ability to work in a confined and vented space while wearing coveralls and full-face respirator. This means limited facial hair to obtain a secure fit. · Ability to work independently with the highest regard for quality and efficiency levels.· Exceptional interpersonal skills and human relation skills that positively benefits interaction with all company employees. · Operates a variety of light equipment and hand tools.· Perform equipment operation and other maintenance tasks according to established safety and risk management practices. This includes properly using an overhead crane· Follow Company Polices and Safety Standards, this includes OSHA and MSDS standards.· Must know how to read and interpret instructions. Highly organized, dependable, reliable and trustworthy.· Be available to work a flexible work schedule, including days, evenings, weekends and holidays.· Ability to accurately measure and apply simple math functions.· Performs additional duties as assigned. QUALIFICATIONS· High School diploma or general education degree (GED).· Ability to successfully pass a background check and other pre-employment screening. PHYSICAL REQUIREMENTS include but are not limited to:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Lift, carry or roll items up to 50+ lbs., seek assistance in lifting if necessary. Use arms, legs, feet, hands and fingers to operate tools and light equipment including paint sprayer. Frequently move the whole body to perform tasks such as climbing, lifting, balancing, painting, walking, and handling of materials. Stand or walk for long periods of time. · A full-face mask respirator is required PPE for this position. An annual medical evaluation, fit testing and limited facial hair are necessary. This position requires the wearing of coveralls to avoid paint on clothes. Climb up and down ladders, and other objects. Stoop, kneel, crouch or crawl in awkward positions. See well (naturally or with correction). Ability to work in a constant state of alertness and safe manner. Compensation: $13.00 per hour Behind every excellent paint job, are the people who get to know the homeowner, help craft the design, improve the look and feel and even keep the project moving along. At Five Star Painting , we're looking for more people who can do that. With flexible hours, it doesn't matter if you're the stay-at-home type, or the 80-hour workweek type, there's a place for you in an independently owned and operated Five Star Painting franchise. Apply today. Notice Five Star Painting LLC is the franchisor of the Five Star Painting franchised system. Each Five Star Painting franchised location is independently-owned and operated by an independent franchisee performing services. As a service to its independent franchisees, Five Star Painting LLC lists employment opportunities available throughout the franchised network so those employment opportunities may be conveniently found by interested parties at one central location for brand management purposes only. Five Star Painting LLC is NOT the employer seeking help. The only employer is the independent franchisee who has listed its available positions on this website. *Acknowledgement I acknowledge that each independent Five Star Painting franchisee hires and determines the terms and conditions of employment for its own employees. Any employment benefits, compensation and employment practices vary by location. Neither Five Star Painting LLC (“Franchisor”) nor its affiliates have the power to: (1) hire, fire or modify the employment condition of franchisee's employees; (2) supervise and control franchisee's employee work schedule or conditions of employment; (3) determine the rate and method of payment; or (4) accept, review or maintain franchisee employment records. Five Star Painting LLC is NOT the employer and/or joint employer for: (i) any of the job opportunities listed on this website; (ii) any of the independent franchisees; and, (iii) any of the employees of the independent franchisees.

Are you ready to start "Building America"? At Lexicon, we're seeking Apprentice Welders to join our team and earn while you learn. If you're passionate about being a part of a team that values integrity, teamwork, and innovation, then Lexicon is the place for you. Join us and become a part of our growing family as we continue to build a brighter future together. Apply now to embark on an exciting journey with Lexicon! Lexicon Benefits * Health, Dental, Vision, and Life Insurance * HSA with employer contributions * Life Insurance * Paid Holidays and Vacation * 401k with company match * Lexicon University Our Lexicon University provides free career development and training, so employees can improve their skills in their chosen field, learn new skills in another area and build a career path that leads to job satisfaction and success for them and their families. Welder Overview: Embark on an exciting journey as a Welder, where you'll work under a qualified trade Journeyman to learn how to fuse fabricated components to create robust structural forms. Your learning experience will include assembling vital pieces that form the backbone of our projects. Safety takes center stage in this role, as any oversight in executing essential tasks could pose risks to our team and the wider community. If you're ready to wield your welding skills in a dynamic environment where your contributions shape the landscape and prioritize safety, this is the role for you. Join us and be part of building a safer, stronger future. Essential Duties and Responsibilities: * Assembly and welding applying learned welding techniques. * Lay out, position, align, and fit components together. * Bolt, clamp and tack-weld parts to secure in position for welding. * Set up equipment and welds parts, using arc welding equipment. * May assemble parts by bolting. * May repair products by dismantling, straightening, reshaping, and reassembling parts using cutting torch, straightening press and other hand tools. * The ability to work overtime and regular, punctual attendance is required. Minimum Qualifications * High school diploma or GED equivalent * Must be at least 18 years of age * Must be physically capable of performing construction work Preferred and Recommended Qualifications * High School Trade preparatory classes * Mathematics and/or Drafting classes * Familiarity and exposure to construction Welder Physical Demands: * Must be able to lift more than 50 pounds frequently on the job and able to climb more than 300 feet. * Must be able to pull own weight when climbing stairs, ladders, and scaffolding up to 150 feet. * Excessive amounts of bending, stooping, carrying, pushing, and pulling weights up to 50 pounds. * Must be able to tolerate temperature fluctuations, a loud and dusty work environment, and able to be around high voltage electromagnetic fields. All the physical demands listed are essential functions. This role is classified as safety sensitive. Candidates must show the capacity to proactively initiate, effectively lead, and consistently uphold safety policies, practices, procedures, and housekeeping standards. Compliance with this requirement is a fundamental condition for employment. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email: ********************* Drug Free Workplace Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese English - Spanish - Chinese To see other positions, click here.

We're Hiring: Apprentice Passive Geolocation Operator 🔒 Clearance: TS/SCI w/ Polygraph 🕒 Schedule: Rotating shifts (24/7 operations) Ready to put your skills to work on a mission that matters? Weeghman & Briggs is seeking an Apprentice Passive Geolocation Operator to provide around-the-clock operational support. In this role, you'll leverage specialized tools, training, and procedures to create intelligence products that directly support the mission. ✨ What You'll Do: Perform 24/7 passive geolocation operations in a fast-paced environment Conduct RF collection & direction-finding activities Use advanced tools & databases to analyze and produce actionable intelligence Complete certification training within 30 days of assignment Support the development of mission-relevant products in alignment with customer requirements 👤 What We're Looking For: 2+ years of recent operational experience (within the last 5 years) Background in RF collection and/or direction-finding Strong analytical skills with attention to detail Active TS/SCI with Polygraph clearance ⭐ Desired Qualifications: Experience in multi-technology geolocation operations Specialized geolocation or collection operator certifications Foreign language training or demonstrated proficiency 🚀 Why Join Us? At Weeghman & Briggs, you're not just filling a role, you're joining a team that values growth, mission success, and collaboration. You'll join a team where your opinion matters and your voice is heard. Benefits: **************************************************************** Weeghman and Briggs is a company specializing in providing analytical services to Government Agencies and private companies to help them improve their processes. Established in 2016 by Anthony Jordan, and since that time has partnered with a list of government entities and private corporations. The company has become a well-known and respected company with a great staff of professionals. Come join the team and become part of the family, where your opinion matters and your voice is heard. Weeghman & Briggs is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, sex, national origin, disability, veteran status, or any other characteristic protected by federal, state, or local laws.

Be Part of ATLAS's Mission-Critical Impact Atlas Advisors, LLC (ATLAS) is seeking Active Geolocation Operators - Apprentice to support a multi-million-dollar Department of Defense contract in Augusta, GA. This critical role involves supporting real-world geolocation operations and language analysis missions. If you're passionate about national security and have relevant operational experience, we want to hear from you! About You You thrive in high-stakes environments. You are detail-oriented and committed to excellence. You have experience in geolocation operations and are eager to learn more. Even if you only match with a few of the desired capabilities listed below, we encourage you to apply! ** This position is contingent upon award ** Key Responsibilities Conduct geolocation operations in support of real-world missions. Collaborate with military and government personnel to ensure mission success. Support 24/7/365 operations, including potential shift work. Requirements Even if you only match with a few of the desired capabilities listed below, we encourage you to apply! Required: Active TS/SCI Clearance with Polygraph. Radio Frequency collection experience. At least two (2) years of relevant operational experience within the last five (5) years. Willingness to support shift work in 24/7/365 operations. Successful completion of a 60-day certification training program. Desired: Certifications in GSM, CDMA, 802.11, EV-DO, UMTS. Passive Geolocation Certification. Prior military or equivalent agency experience. TSO Certification. Completion of NCS Cryptologic Skills or military equivalent courses. Benefits Competitive salary commensurate with experience. 401(k) retirement plan. Full medical care benefits package. Training and professional development. Company-provided life insurance. Short-term & long-term disability. Paid time off.

**MasTec Utility Services** delivers critical infrastructure construction and engineering services for power delivery, gas, and water customers, specializing in overhead and underground electric distribution for power delivery systems, gas distribution construction for gas systems, and turnkey solutions for a variety of water, sewer, and civil infrastructure projects. Backed by the strength of decades of experience, unrivaled industry skills, and a deep commitment to core values, MUS delivers safe, innovative, and environmentally responsible services that provide extraordinary value to clients. MasTec Utility Services is a purpose-driven company. Our core values guide our strategy, performance, and culture. We believe in maintaining an environment where team members can make an impact, grow, and thrive. A place where they find meaning and purpose in doing the important work of ensuring communities have the vital energy, light, and communications to prosper. Our culture is inclusive and welcoming. Our teams are empowered with abundant training, tools, and opportunities to follow their curiosity and ambitions. Everyone has an equal chance to advance. Everyone is supported, respected, and challenged to be their best. We're always looking for talented and dedicated people to join us and love where they work. MasTec Utility Services is a proud subsidiary of MasTec (NYSE: MTZ), a Fortune 500 Company ranked by Energy News-Record as one of the leading contractors in the country. MUS is part of the MasTec Power Delivery segment. We are certified as a minority-controlled company by the National Minority Suppliers Development Council (NMSDC). Our rich diversity of people and ideas makes us a stronger, more innovative organization. **Job Summary** The Apprentice Lineman C assists the Journeyman Lineman and the Foreman while in training and learning the trade. Responsible for performing work related to the construction and maintain of poles, power lines, auxiliary facilities and equipment for the transmission and distribution of electricity. This position supports and learns from the Lineman team and works with other personnel from the department. Responsibilities + Construct, maintain, and inspect transmission and distribution of electrical or power lines. + Provide technical skills needed for the operation and maintenance of reliable electrical services for the consumer, completing jobs with quality and timeliness. + Provide for connecting and disconnecting, installing and removal, moving and transferring of various electrical devices on customer facilities, i.e., transformers, transformer banks, regulators, switches, switching devices, capacitor banks, etc. + Route or reroute power lines over, under, or around existing lines and structures. + Inspect and/or remove power lines that are damaged. + Assist in carrying poles, digging holes, and other operations involved in setting or replacing poles. + Perform line switching or sectionalizing, as directed. + Investigate consumer complaints and make repairs to energized electrical distribution lines, as needed. + Provide backup for Class C Apprentice Lineman and assist in completion of duties. + Responsible for timely submission of all Apprentice Program required documentation. + May troubleshoot electrical problems on customer equipment. + Drive bucket truck to jobsite and maintain truck stock. + Perform other duties as required and/or assigned. Qualifications **Minimum** + High school diploma, or equivalent. + Valid driver's license is required. **Preferred** + Electrical trade experience. + Class A CDL. + OSHA 10 Certification. **Physical Demands and Work Environment** This job operates in a field environment. This role routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting. Also, working in inclement weather conditions, such as extreme heat, extreme cold, rain, ice, snow, and wind. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. This position is physically active, with lifting required. Must be able to bend and lift and carry up to 50 pounds. Clarity of vision at 20 feet or more or 20 inches or less, with the ability to judge distance and space relationships. Precise hand-eye coordination. Ability to identify and distinguish colors. _Please note this is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee for this job. The Company reserves the right to revise or change the job duties as the need arises. Management reserves the right to change the description,_ _duties, or work schedules to accommodate individuals with disabilities._ Benefits available include Medical, Dental, Vision, Disability and Life insurance, a 401k plan and Employee Stock Purchase plan. MasTec is a publicly traded company MTZ (NYSE). Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories. **Minimum** + High school diploma, or equivalent. + Valid driver's license is required. **Preferred** + Electrical trade experience. + Class A CDL. + OSHA 10 Certification. **Physical Demands and Work Environment** This job operates in a field environment. This role routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting. Also, working in inclement weather conditions, such as extreme heat, extreme cold, rain, ice, snow, and wind. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. This position is physically active, with lifting required. Must be able to bend and lift and carry up to 50 pounds. Clarity of vision at 20 feet or more or 20 inches or less, with the ability to judge distance and space relationships. Precise hand-eye coordination. Ability to identify and distinguish colors. _Please note this job description is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee for this job. The Company reserves the right to revise or change the job duties as the need arises. Management reserves the right to change the description,_ _duties, or work schedules to accommodate individuals with disabilities._ Benefits available include Medical, Dental, Vision, Disability and Life insurance, a 401k plan and Employee Stock Purchase plan. MasTec is a publicly traded company MTZ (NYSE). Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories. + Construct, maintain, and inspect transmission and distribution of electrical or power lines. + Provide technical skills needed for the operation and maintenance of reliable electrical services for the consumer, completing jobs with quality and timeliness. + Provide for connecting and disconnecting, installing and removal, moving and transferring of various electrical devices on customer facilities, i.e., transformers, transformer banks, regulators, switches, switching devices, capacitor banks, etc. + Route or reroute power lines over, under, or around existing lines and structures. + Inspect and/or remove power lines that are damaged. + Assist in carrying poles, digging holes, and other operations involved in setting or replacing poles. + Perform line switching or sectionalizing, as directed. + Investigate consumer complaints and make repairs to energized electrical distribution lines, as needed. + Provide backup for Class C Apprentice Lineman and assist in completion of duties. + Responsible for timely submission of all Apprentice Program required documentation. + May troubleshoot electrical problems on customer equipment. + Drive bucket truck to jobsite and maintain truck stock. + Perform other duties as required and/or assigned.

Carpenter Apprentice - Start Your Skilled Trades Career with DC Enclosures (Northwest Georgia) Looking to turn your construction skills into a long-term career? DC Enclosures is hiring a Carpenter Apprentice to join our growing installation team in Northwest Georgia. You'll start with a full day of safety training, then work directly with experienced carpenters, gaining valuable trade knowledge and building a path toward becoming a lead installer. We're a trusted builder of sunrooms, screen enclosures, and pool cages - and we take as much pride in our team's success as we do in our craftsmanship. What You'll Be Doing From Day One, you'll be set up for success. After completing safety training, you'll get hands-on experience alongside a Senior Carpenter, learning professional installation techniques while helping build custom enclosures and sunrooms. Your responsibilities will include: Assisting with installations on active job sites Learning building codes, construction methods, and precision measuring skills Preparing and organizing tools and materials in the shop Safely operating power tools under supervision Communicating professionally with customers when needed Growing your skills in a supportive, team-oriented environment What We're Looking For 1-2+ years of construction experience (general construction, carpentry, framing, windows, roofing, etc. - sunroom experience not required) Reliable transportation and punctuality Ability to lift 75+ lbs, climb ladders, and work outdoors in varying conditions Valid driver's license with a clean driving record Professional appearance, strong work ethic, and positive attitude Able to pass a background check and pre-employment drug test What You'll Get Pay: $18-$23 per hour based on experience Bonuses: Annual, anniversary, and performance-based Benefits: Medical, dental, vision, and life insurance (individual and family plans) Company-provided tools, equipment, and transportation Paid holidays and vacation Stable, year-round work with opportunities for advancement Why Work at DC Enclosures? We don't just build sunrooms - we build careers. Many of our lead installers started as apprentices, and we love promoting from within. You'll join a close-knit, supportive crew that values quality craftsmanship and helps each other succeed. Apply Now If you have construction experience and are ready to grow your career, apply today and send us your resume. Let's start building your future together.

Job Description Affordable Heating & Air LLC, Sylacauga, AL. We are hiring an HVAC Apprentice to join our Installation Team! We are family owned and operated HVAC, Heating, AC, and Indoor Air Quality service company, providing high-quality heating and cooling service in Shelby and Talladega County, and surrounding communities since 2001. Are you looking to build a satisfying and stable career in the HVAC industry? Then we want to invest in you! Company paid hands-on training, and Bryant dealer training provided to build a foundation you can grow upon! Some work may require being out of town during the week and home on the weekends - travel, food/per diem & hotel provided. What Affordable have to offer / Benefits: Bryant dealer training, company paid Local family-owned and operated Customer focused Award-Winning Bryant Factory Authorized Dealer! 100% paid medical for employee Paid vacation Paid holidays 401K with company match Use of company vehicle + gas card Company uniform and phone Job Title: HVAC Apprentice - Entry-Level Installer Work Hours: 8:00am to 5:00pm, Monday through Friday, with occasional overtime Pay Rate: $15.00 - $20.00 per hour, depending on skill level What you will be doing: Residential and light commercial installations Taking out old units and installing new Installing and insulating duct work brazing copper pipe Building platforms Wiring up thermostat Using power tools - saws, drills, torches, etc. Working with a lead and receiving hands-on instruction Gaining experience to take the EPA Certification exam Qualifications / Skills: Valid driver's license and insurable driving record 6 months of HVAC experience or a combination of education and experience desired but not required Construction or similar industry experience desired but not required Ability to obtain EPA Certification once employed Maintain a professional attitude at all times Must be able to take direction from Lead workers and Supervisors Ability to follow directions given, both verbally and in writing Ability to use a tape measure correctly Ability to use power tools safely and correctly Ability to carry 100lbs overhead with assistance Ability to unload and load truck as needed Well organized and ability to work independently and as a team High school diploma or equivalent Check us out online: ************************

Overview At CoolSys, we offer more than just a job-we provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with: Competitive Compensation: Competitive pay $18-$24/hour (DOE) and sign-on bonuses up to $3,000 (per location). Ongoing Education & Training: Access to state-of-the-art facilities and paid online training. Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting. Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing. Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities The Apprentice (HVAC or Refrigeration) provides support to an installation team by completing tasks in a safe, prompt, accurate, and professional manner and following customer specifications, applicable building codes and proper piping practices. Install equipment, by project requirements and under the direction of a senior technician: HVAC: air handler drains, piping for split systems, overhead duct hangers and ductwork, etc. Refrigeration: display case drains, walk-in box drains, overhead hangers, and piping, etc. Perform all assigned work safely and responsibly. Use power and hand tools, powered vehicles, machinery, and PPE as directed and required by Source, customer, and contract policy. Escalate problems and concerns (safety, quality of work, etc. ) to on-site senior technicians or project managers promptly. Always maintain clean and professional job sites/work areas. Properly store, disassemble, or remove all spare and waste materials created on assigned job sites. Provide assistance and support to senior technician/s on a job. Carry out all responsibilities in an honest, ethical, and professional manner. Perform other duties as assigned. Installation of all types of piping including PVC, copper (brazing), copper line sets Qualifications Education or experience equivalent to a High school diploma, GED, or completion from trade program or technical school. 1+ years of experience in the construction, refrigeration, HVAC, or other related industry/trade preferred. Ability to operate a scissor lift or forklift preferred. Knowledge of job site safety, and ability to perform work by safe work practices and rules. Ability to use basic power and hand tools including drills, fuel gas tools, electrical meters, measurement tools, etc. Ability to be punctual and dependable. Ability to work in a variety of working conditions, including scaling ladders to various heights, outdoors in hot/cold temperatures, in noisy environments, etc. Ability to perform basic mathematical calculations including fractional addition/subtraction, multiplication, division, and measurements. Ability to read, write, and communicate timely, clearly, and concisely. Ability to work constructively in a team environment and follow instructions from senior technicians. Ability to understand and follow all company policies and procedures and all applicable State and Federal laws. Good driving record. Join Us Today, there are 26 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and Twitter. Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, installer, installation, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, entry level

The Role We're looking for exceptional Technician apprentices who can deliver world-class customer service. As an Apprentice Technician you will work as part of a dynamic and passionate team to demonstrate technical competency and exceed customer expectations by accomplishing the highest quality work, every time. By working closely with the Service Technicians, Service Manager, and field supervisor, you will complete jobs on time, helping achieve the company's financial goals. Your primary goal as an apprentice is to learn the trade and become a Service Technician. Responsibilities ● Assist lead service technician in all jobs; be efficient and accurate. ● Establish customer rapport to ensure highest levels of satisfaction. ● Demonstrate you are professional and knowledgeable to win new referrals and repeat business. ● Assist in properly staging jobs; adhering to quality checklist. ● Support lead service technician in maintaining a clean, organized job site and accurate truck inventory. ● Participate actively in all on-the-job training and formal exercises to master the trade. ● Complete accurate and timely paperwork. Requirements ● Driving record with few or no violations. ● Highly organized with exceptional follow-through abilities. ● Strong verbal and written communication skills. ● Passionate about Aux Home Services and loves the brand. ● High integrity with communication skills and ability to make solid connections. ● Strong desires to be a better apprentice tomorrow than you are today. ● Outgoing personality that blends well with a fast-paced, goal-driven environment. ● Competitive individual contributor who also loves to win as a team. ● Highly motivated, self-starter who's flexible and has a great attitude on life.Team Player within all Departments at Aux Home Services